Fix common misspellings

Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>

12 files changed, 19 insertions, 19 deletions

diff --git a/drivers/net/irda/ali-ircc.c b/drivers/net/irda/ali-ircc.c
index 92631eb..872183f 100644
--- a/drivers/net/irda/ali-ircc.c
+++ b/drivers/net/irda/ali-ircc.c
@@ -76,7 +76,7 @@ static int  ali_ircc_probe_53(ali_chip_t *chip, chipio_t *info);
 static int  ali_ircc_init_43(ali_chip_t *chip, chipio_t *info);
 static int  ali_ircc_init_53(ali_chip_t *chip, chipio_t *info);
 
-/* These are the currently known ALi sourth-bridge chipsets, the only one difference
+/* These are the currently known ALi south-bridge chipsets, the only one difference
  * is that M1543C doesn't support HP HDSL-3600
  */
 static ali_chip_t chips[] =
@@ -1108,7 +1108,7 @@ static void ali_ircc_sir_change_speed(struct ali_ircc_cb *priv, __u32 speed)
 	outb(lcr,		  iobase+UART_LCR); /* Set 8N1	*/
 	outb(fcr,		  iobase+UART_FCR); /* Enable FIFO's */
 
-	/* without this, the conection will be broken after come back from FIR speed,
+	/* without this, the connection will be broken after come back from FIR speed,
 	   but with this, the SIR connection is harder to established */
 	outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), iobase+UART_MCR);
 	
diff --git a/drivers/net/irda/donauboe.c b/drivers/net/irda/donauboe.c
index f81d944..174cafa 100644
--- a/drivers/net/irda/donauboe.c
+++ b/drivers/net/irda/donauboe.c
@@ -56,7 +56,7 @@
 /* do_probe module parameter Enable this code */
 /* Probe code is very useful for understanding how the hardware works */
 /* Use it with various combinations of TT_LEN, RX_LEN */
-/* Strongly recomended, disable if the probe fails on your machine */
+/* Strongly recommended, disable if the probe fails on your machine */
 /* and send me <james@fishsoup.dhs.org> the output of dmesg */
 #define USE_PROBE 1
 #undef  USE_PROBE
diff --git a/drivers/net/irda/donauboe.h b/drivers/net/irda/donauboe.h
index 77fcf44..d92d54e 100644
--- a/drivers/net/irda/donauboe.h
+++ b/drivers/net/irda/donauboe.h
@@ -51,7 +51,7 @@
 
 /* The documentation for this chip is allegedly released         */
 /* However I have not seen it, not have I managed to contact     */
-/* anyone who has. HOWEVER the chip bears a striking resemblence */
+/* anyone who has. HOWEVER the chip bears a striking resemblance */
 /* to the IrDA controller in the Toshiba RISC TMPR3922 chip      */
 /* the documentation for this is freely available at             */
 /* http://www.madingley.org/james/resources/toshoboe/TMPR3922.pdf */
diff --git a/drivers/net/irda/girbil-sir.c b/drivers/net/irda/girbil-sir.c
index a31b8fa..96cdecf 100644
--- a/drivers/net/irda/girbil-sir.c
+++ b/drivers/net/irda/girbil-sir.c
@@ -38,7 +38,7 @@ static int girbil_change_speed(struct sir_dev *dev, unsigned speed);
 /* Control register 1 */
 #define GIRBIL_TXEN    0x01 /* Enable transmitter */
 #define GIRBIL_RXEN    0x02 /* Enable receiver */
-#define GIRBIL_ECAN    0x04 /* Cancel self emmited data */
+#define GIRBIL_ECAN    0x04 /* Cancel self emitted data */
 #define GIRBIL_ECHO    0x08 /* Echo control characters */
 
 /* LED Current Register (0x2) */
diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c
index e4ea619..d9267cb 100644
--- a/drivers/net/irda/irda-usb.c
+++ b/drivers/net/irda/irda-usb.c
@@ -370,7 +370,7 @@ static void speed_bulk_callback(struct urb *urb)
 	/* urb is now available */
 	//urb->status = 0; -> tested above
 
-	/* New speed and xbof is now commited in hardware */
+	/* New speed and xbof is now committed in hardware */
 	self->new_speed = -1;
 	self->new_xbofs = -1;
 
@@ -602,7 +602,7 @@ static void write_bulk_callback(struct urb *urb)
 			IRDA_DEBUG(1, "%s(), Changing speed now...\n", __func__);
 			irda_usb_change_speed_xbofs(self);
 		} else {
-			/* New speed and xbof is now commited in hardware */
+			/* New speed and xbof is now committed in hardware */
 			self->new_speed = -1;
 			self->new_xbofs = -1;
 			/* Done, waiting for next packet */
diff --git a/drivers/net/irda/mcs7780.c b/drivers/net/irda/mcs7780.c
index cc821de..be52bfe 100644
--- a/drivers/net/irda/mcs7780.c
+++ b/drivers/net/irda/mcs7780.c
@@ -588,7 +588,7 @@ static int mcs_speed_change(struct mcs_cb *mcs)
 
 	mcs_get_reg(mcs, MCS_MODE_REG, &rval);
 
-	/* MINRXPW values recomended by MosChip */
+	/* MINRXPW values recommended by MosChip */
 	if (mcs->new_speed <= 115200) {
 		rval &= ~MCS_FIR;
 
@@ -799,7 +799,7 @@ static void mcs_receive_irq(struct urb *urb)
 	ret = usb_submit_urb(urb, GFP_ATOMIC);
 }
 
-/* Transmit callback funtion.  */
+/* Transmit callback function.  */
 static void mcs_send_irq(struct urb *urb)
 {
 	struct mcs_cb *mcs = urb->context;
@@ -811,7 +811,7 @@ static void mcs_send_irq(struct urb *urb)
 		netif_wake_queue(ndev);
 }
 
-/* Transmit callback funtion.  */
+/* Transmit callback function.  */
 static netdev_tx_t mcs_hard_xmit(struct sk_buff *skb,
 				       struct net_device *ndev)
 {
diff --git a/drivers/net/irda/nsc-ircc.c b/drivers/net/irda/nsc-ircc.c
index 559fe85..7a963d4 100644
--- a/drivers/net/irda/nsc-ircc.c
+++ b/drivers/net/irda/nsc-ircc.c
@@ -716,7 +716,7 @@ static int nsc_ircc_probe_338(nsc_chip_t *chip, chipio_t *info)
 	int reg, com = 0;
 	int pnp;
 
-	/* Read funtion enable register (FER) */
+	/* Read function enable register (FER) */
 	outb(CFG_338_FER, cfg_base);
 	reg = inb(cfg_base+1);
 
diff --git a/drivers/net/irda/nsc-ircc.h b/drivers/net/irda/nsc-ircc.h
index 7ba7738..32fa582 100644
--- a/drivers/net/irda/nsc-ircc.h
+++ b/drivers/net/irda/nsc-ircc.h
@@ -135,7 +135,7 @@
 #define LSR_TXRDY       0x20 /* Transmitter ready */
 #define LSR_TXEMP       0x40 /* Transmitter empty */
 
-#define ASCR            0x07 /* Auxillary Status and Control Register */
+#define ASCR            0x07 /* Auxiliary Status and Control Register */
 #define ASCR_RXF_TOUT   0x01 /* Rx FIFO timeout */
 #define ASCR_FEND_INF   0x02 /* Frame end bytes in rx FIFO */
 #define ASCR_S_EOT      0x04 /* Set end of transmission */
diff --git a/drivers/net/irda/pxaficp_ir.c b/drivers/net/irda/pxaficp_ir.c
index c192c31..001ed0a 100644
--- a/drivers/net/irda/pxaficp_ir.c
+++ b/drivers/net/irda/pxaficp_ir.c
@@ -40,7 +40,7 @@
 
 #define ICCR0_AME	(1 << 7)	/* Address match enable */
 #define ICCR0_TIE	(1 << 6)	/* Transmit FIFO interrupt enable */
-#define ICCR0_RIE	(1 << 5)	/* Recieve FIFO interrupt enable */
+#define ICCR0_RIE	(1 << 5)	/* Receive FIFO interrupt enable */
 #define ICCR0_RXE	(1 << 4)	/* Receive enable */
 #define ICCR0_TXE	(1 << 3)	/* Transmit enable */
 #define ICCR0_TUS	(1 << 2)	/* Transmit FIFO underrun select */
@@ -483,7 +483,7 @@ static irqreturn_t pxa_irda_fir_irq(int irq, void *dev_id)
 	}
 
 	if (icsr0 & ICSR0_EIF) {
-		/* An error in FIFO occured, or there is a end of frame */
+		/* An error in FIFO occurred, or there is a end of frame */
 		pxa_irda_fir_irq_eif(si, dev, icsr0);
 	}
 
diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c
index 1c1677c..8800e1f 100644
--- a/drivers/net/irda/smsc-ircc2.c
+++ b/drivers/net/irda/smsc-ircc2.c
@@ -1582,7 +1582,7 @@ static irqreturn_t smsc_ircc_interrupt_sir(struct net_device *dev)
 	int iobase;
 	int iir, lsr;
 
-	/* Already locked comming here in smsc_ircc_interrupt() */
+	/* Already locked coming here in smsc_ircc_interrupt() */
 	/*spin_lock(&self->lock);*/
 
 	iobase = self->io.sir_base;
diff --git a/drivers/net/irda/via-ircc.c b/drivers/net/irda/via-ircc.c
index 67c0ad4..fc89685 100644
--- a/drivers/net/irda/via-ircc.c
+++ b/drivers/net/irda/via-ircc.c
@@ -29,7 +29,7 @@ F02 Oct/28/02: Add SB device ID for 3147 and 3177.
 
 2004-02-16: <sda@bdit.de>
 - Removed unneeded 'legacy' pci stuff.
-- Make sure SIR mode is set (hw_init()) before calling mode-dependant stuff.
+- Make sure SIR mode is set (hw_init()) before calling mode-dependent stuff.
 - On speed change from core, don't send SIR frame with new speed. 
   Use current speed and change speeds later.
 - Make module-param dongle_id actually work.
@@ -385,7 +385,7 @@ static __devinit int via_ircc_open(int i, chipio_t * info, unsigned int id)
 	self->io.dongle_id = dongle_id;
 
 	/* The only value we must override it the baudrate */
-	/* Maximum speeds and capabilities are dongle-dependant. */
+	/* Maximum speeds and capabilities are dongle-dependent. */
 	switch( self->io.dongle_id ){
 	case 0x0d:
 		self->qos.baud_rate.bits =
diff --git a/drivers/net/irda/vlsi_ir.h b/drivers/net/irda/vlsi_ir.h
index d66fab8..a076eb1 100644
--- a/drivers/net/irda/vlsi_ir.h
+++ b/drivers/net/irda/vlsi_ir.h
@@ -209,7 +209,7 @@ enum vlsi_pio_irintr {
 	IRINTR_ACTEN	= 0x80,	/* activity interrupt enable */
 	IRINTR_ACTIVITY	= 0x40,	/* activity monitor (traffic detected) */
 	IRINTR_RPKTEN	= 0x20,	/* receive packet interrupt enable*/
-	IRINTR_RPKTINT	= 0x10,	/* rx-packet transfered from fifo to memory finished */
+	IRINTR_RPKTINT	= 0x10,	/* rx-packet transferred from fifo to memory finished */
 	IRINTR_TPKTEN	= 0x08,	/* transmit packet interrupt enable */
 	IRINTR_TPKTINT	= 0x04,	/* last bit of tx-packet+crc shifted to ir-pulser */
 	IRINTR_OE_EN	= 0x02,	/* UART rx fifo overrun error interrupt enable */
@@ -739,7 +739,7 @@ typedef struct vlsi_irda_dev {
 /* the remapped error flags we use for returning from frame
  * post-processing in vlsi_process_tx/rx() after it was completed
  * by the hardware. These functions either return the >=0 number
- * of transfered bytes in case of success or the negative (-)
+ * of transferred bytes in case of success or the negative (-)
  * of the or'ed error flags.
  */