summaryrefslogtreecommitdiffstats
path: root/drivers/net/ieee802154
diff options
context:
space:
mode:
authorAlexander Aring <alex.aring@gmail.com>2015-08-10 21:15:57 +0200
committerMarcel Holtmann <marcel@holtmann.org>2015-08-10 20:43:06 +0200
commitfc0719e6a144402197a2147117f10b66ee623fbb (patch)
treeb9b4918ee86e6604d7686dd6fa891c906c17b8e1 /drivers/net/ieee802154
parent89c7d788f89d58136a2e5596796c298942ee32d6 (diff)
downloadop-kernel-dev-fc0719e6a144402197a2147117f10b66ee623fbb.zip
op-kernel-dev-fc0719e6a144402197a2147117f10b66ee623fbb.tar.gz
at86rf230: use STATE_TX_ARET mode only
This patch changes the state change behaviour of at86rf230 to always TX_ARET mode. According the at86rf2xx datasheets TX_ARET mode doesn't mean to be always waiting for ack frames after transmit. The transceiver will automatically wait for ack frames or not if the acknowledge request bit is set. See section "TX_ARET_ON – Transmit with Automatic Frame Retransmission and CSMA-CA Retry". Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Diffstat (limited to 'drivers/net/ieee802154')
-rw-r--r--drivers/net/ieee802154/at86rf230.c52
1 files changed, 14 insertions, 38 deletions
diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c
index d0d5bf6..6422caa 100644
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -97,9 +97,7 @@ struct at86rf230_local {
struct at86rf230_state_change irq;
- bool tx_aret;
unsigned long cal_timeout;
- s8 max_frame_retries;
bool is_tx;
bool is_tx_from_off;
u8 tx_retry;
@@ -651,7 +649,7 @@ at86rf230_tx_complete(void *context)
enable_irq(ctx->irq);
- ieee802154_xmit_complete(lp->hw, lp->tx_skb, !lp->tx_aret);
+ ieee802154_xmit_complete(lp->hw, lp->tx_skb, false);
}
static void
@@ -760,17 +758,10 @@ at86rf230_irq_trx_end(struct at86rf230_local *lp)
{
if (lp->is_tx) {
lp->is_tx = 0;
-
- if (lp->tx_aret)
- at86rf230_async_state_change(lp, &lp->irq,
- STATE_FORCE_TX_ON,
- at86rf230_tx_trac_status,
- true);
- else
- at86rf230_async_state_change(lp, &lp->irq,
- STATE_RX_AACK_ON,
- at86rf230_tx_complete,
- true);
+ at86rf230_async_state_change(lp, &lp->irq,
+ STATE_FORCE_TX_ON,
+ at86rf230_tx_trac_status,
+ true);
} else {
at86rf230_async_read_reg(lp, RG_TRX_STATE, &lp->irq,
at86rf230_rx_trac_check, true);
@@ -876,24 +867,16 @@ at86rf230_xmit_start(void *context)
struct at86rf230_state_change *ctx = context;
struct at86rf230_local *lp = ctx->lp;
- /* In ARET mode we need to go into STATE_TX_ARET_ON after we
- * are in STATE_TX_ON. The pfad differs here, so we change
- * the complete handler.
- */
- if (lp->tx_aret) {
- if (lp->is_tx_from_off) {
- lp->is_tx_from_off = false;
- at86rf230_async_state_change(lp, ctx, STATE_TX_ARET_ON,
- at86rf230_write_frame,
- false);
- } else {
- at86rf230_async_state_change(lp, ctx, STATE_TX_ON,
- at86rf230_xmit_tx_on,
- false);
- }
+ /* check if we change from off state */
+ if (lp->is_tx_from_off) {
+ lp->is_tx_from_off = false;
+ at86rf230_async_state_change(lp, ctx, STATE_TX_ARET_ON,
+ at86rf230_write_frame,
+ false);
} else {
at86rf230_async_state_change(lp, ctx, STATE_TX_ON,
- at86rf230_write_frame, false);
+ at86rf230_xmit_tx_on,
+ false);
}
}
@@ -1267,15 +1250,8 @@ static int
at86rf230_set_frame_retries(struct ieee802154_hw *hw, s8 retries)
{
struct at86rf230_local *lp = hw->priv;
- int rc = 0;
-
- lp->tx_aret = retries >= 0;
- lp->max_frame_retries = retries;
- if (retries >= 0)
- rc = at86rf230_write_subreg(lp, SR_MAX_FRAME_RETRIES, retries);
-
- return rc;
+ return at86rf230_write_subreg(lp, SR_MAX_FRAME_RETRIES, retries);
}
static int
OpenPOWER on IntegriCloud