8390: Move the 8390 related drivers

Moves the drivers for the National Semi-conductor 8390 chipset into
drivers/net/ethernet/8390/ and the necessary Kconfig and Makefile
changes.

CC: Donald Becker <becker@scyld.com>
CC: Paul Gortmaker <paul.gortmaker@windriver.com>
CC: Alain Malek <alain.malek@cryogen.com>
CC: Peter De Schrijver <p2@mind.be>
CC: "David Huggins-Daines" <dhd@debian.org>
CC: Wim Dumon <wimpie@kotnet.org>
CC: Yoshinori Sato <ysato@users.sourceforge.jp>
CC: David Hinds <dahinds@users.sourceforge.net>
CC: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

1 files changed, 0 insertions, 439 deletions

diff --git a/drivers/net/hp.c b/drivers/net/hp.c
deleted file mode 100644
index 18564d4..0000000
--- a/drivers/net/hp.c
+++ /dev/null
@@ -1,439 +0,0 @@
-/* hp.c: A HP LAN ethernet driver for linux. */
-/*
-	Written 1993-94 by Donald Becker.
-
-	Copyright 1993 United States Government as represented by the
-	Director, National Security Agency.
-
-	This software may be used and distributed according to the terms
-	of the GNU General Public License, incorporated herein by reference.
-
-	The author may be reached as becker@scyld.com, or C/O
-	Scyld Computing Corporation
-	410 Severn Ave., Suite 210
-	Annapolis MD 21403
-
-	This is a driver for the HP PC-LAN adaptors.
-
-	Sources:
-	  The Crynwr packet driver.
-*/
-
-static const char version[] =
-	"hp.c:v1.10 9/23/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n";
-
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-
-#include "8390.h"
-
-#define DRV_NAME "hp"
-
-/* A zero-terminated list of I/O addresses to be probed. */
-static unsigned int hppclan_portlist[] __initdata =
-{ 0x300, 0x320, 0x340, 0x280, 0x2C0, 0x200, 0x240, 0};
-
-#define HP_IO_EXTENT	32
-
-#define HP_DATAPORT		0x0c	/* "Remote DMA" data port. */
-#define HP_ID			0x07
-#define HP_CONFIGURE	0x08	/* Configuration register. */
-#define	 HP_RUN			0x01	/* 1 == Run, 0 == reset. */
-#define	 HP_IRQ			0x0E	/* Mask for software-configured IRQ line. */
-#define	 HP_DATAON		0x10	/* Turn on dataport */
-#define NIC_OFFSET		0x10	/* Offset the 8390 registers. */
-
-#define HP_START_PG		0x00	/* First page of TX buffer */
-#define HP_8BSTOP_PG	0x80	/* Last page +1 of RX ring */
-#define HP_16BSTOP_PG	0xFF	/* Same, for 16 bit cards. */
-
-static int hp_probe1(struct net_device *dev, int ioaddr);
-
-static void hp_reset_8390(struct net_device *dev);
-static void hp_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr,
-					int ring_page);
-static void hp_block_input(struct net_device *dev, int count,
-					struct sk_buff *skb , int ring_offset);
-static void hp_block_output(struct net_device *dev, int count,
-							const unsigned char *buf, int start_page);
-
-static void hp_init_card(struct net_device *dev);
-
-/* The map from IRQ number to HP_CONFIGURE register setting. */
-/* My default is IRQ5	             0  1  2  3  4  5  6  7  8  9 10 11 */
-static char irqmap[16] __initdata= { 0, 0, 4, 6, 8,10, 0,14, 0, 4, 2,12,0,0,0,0};
-
-
-/*	Probe for an HP LAN adaptor.
-	Also initialize the card and fill in STATION_ADDR with the station
-	address. */
-
-static int __init do_hp_probe(struct net_device *dev)
-{
-	int i;
-	int base_addr = dev->base_addr;
-	int irq = dev->irq;
-
-	if (base_addr > 0x1ff)		/* Check a single specified location. */
-		return hp_probe1(dev, base_addr);
-	else if (base_addr != 0)	/* Don't probe at all. */
-		return -ENXIO;
-
-	for (i = 0; hppclan_portlist[i]; i++) {
-		if (hp_probe1(dev, hppclan_portlist[i]) == 0)
-			return 0;
-		dev->irq = irq;
-	}
-
-	return -ENODEV;
-}
-
-#ifndef MODULE
-struct net_device * __init hp_probe(int unit)
-{
-	struct net_device *dev = alloc_eip_netdev();
-	int err;
-
-	if (!dev)
-		return ERR_PTR(-ENOMEM);
-
-	sprintf(dev->name, "eth%d", unit);
-	netdev_boot_setup_check(dev);
-
-	err = do_hp_probe(dev);
-	if (err)
-		goto out;
-	return dev;
-out:
-	free_netdev(dev);
-	return ERR_PTR(err);
-}
-#endif
-
-static int __init hp_probe1(struct net_device *dev, int ioaddr)
-{
-	int i, retval, board_id, wordmode;
-	const char *name;
-	static unsigned version_printed;
-
-	if (!request_region(ioaddr, HP_IO_EXTENT, DRV_NAME))
-		return -EBUSY;
-
-	/* Check for the HP physical address, 08 00 09 xx xx xx. */
-	/* This really isn't good enough: we may pick up HP LANCE boards
-	   also!  Avoid the lance 0x5757 signature. */
-	if (inb(ioaddr) != 0x08
-		|| inb(ioaddr+1) != 0x00
-		|| inb(ioaddr+2) != 0x09
-		|| inb(ioaddr+14) == 0x57) {
-		retval = -ENODEV;
-		goto out;
-	}
-
-	/* Set up the parameters based on the board ID.
-	   If you have additional mappings, please mail them to me -djb. */
-	if ((board_id = inb(ioaddr + HP_ID)) & 0x80) {
-		name = "HP27247";
-		wordmode = 1;
-	} else {
-		name = "HP27250";
-		wordmode = 0;
-	}
-
-	if (ei_debug  &&  version_printed++ == 0)
-		printk(version);
-
-	printk("%s: %s (ID %02x) at %#3x,", dev->name, name, board_id, ioaddr);
-
-	for(i = 0; i < ETHER_ADDR_LEN; i++)
-		dev->dev_addr[i] = inb(ioaddr + i);
-
-	printk(" %pM", dev->dev_addr);
-
-	/* Snarf the interrupt now.  Someday this could be moved to open(). */
-	if (dev->irq < 2) {
-		static const int irq_16list[] = { 11, 10, 5, 3, 4, 7, 9, 0};
-		static const int irq_8list[] = { 7, 5, 3, 4, 9, 0};
-		const int *irqp = wordmode ? irq_16list : irq_8list;
-		do {
-			int irq = *irqp;
-			if (request_irq (irq, NULL, 0, "bogus", NULL) != -EBUSY) {
-				unsigned long cookie = probe_irq_on();
-				/* Twinkle the interrupt, and check if it's seen. */
-				outb_p(irqmap[irq] | HP_RUN, ioaddr + HP_CONFIGURE);
-				outb_p( 0x00 | HP_RUN, ioaddr + HP_CONFIGURE);
-				if (irq == probe_irq_off(cookie)		 /* It's a good IRQ line! */
-					&& request_irq (irq, eip_interrupt, 0, DRV_NAME, dev) == 0) {
-					printk(" selecting IRQ %d.\n", irq);
-					dev->irq = *irqp;
-					break;
-				}
-			}
-		} while (*++irqp);
-		if (*irqp == 0) {
-			printk(" no free IRQ lines.\n");
-			retval = -EBUSY;
-			goto out;
-		}
-	} else {
-		if (dev->irq == 2)
-			dev->irq = 9;
-		if ((retval = request_irq(dev->irq, eip_interrupt, 0, DRV_NAME, dev))) {
-			printk (" unable to get IRQ %d.\n", dev->irq);
-			goto out;
-		}
-	}
-
-	/* Set the base address to point to the NIC, not the "real" base! */
-	dev->base_addr = ioaddr + NIC_OFFSET;
-	dev->netdev_ops = &eip_netdev_ops;
-
-	ei_status.name = name;
-	ei_status.word16 = wordmode;
-	ei_status.tx_start_page = HP_START_PG;
-	ei_status.rx_start_page = HP_START_PG + TX_PAGES;
-	ei_status.stop_page = wordmode ? HP_16BSTOP_PG : HP_8BSTOP_PG;
-
-	ei_status.reset_8390 = hp_reset_8390;
-	ei_status.get_8390_hdr = hp_get_8390_hdr;
-	ei_status.block_input = hp_block_input;
-	ei_status.block_output = hp_block_output;
-	hp_init_card(dev);
-
-	retval = register_netdev(dev);
-	if (retval)
-		goto out1;
-	return 0;
-out1:
-	free_irq(dev->irq, dev);
-out:
-	release_region(ioaddr, HP_IO_EXTENT);
-	return retval;
-}
-
-static void
-hp_reset_8390(struct net_device *dev)
-{
-	int hp_base = dev->base_addr - NIC_OFFSET;
-	int saved_config = inb_p(hp_base + HP_CONFIGURE);
-
-	if (ei_debug > 1) printk("resetting the 8390 time=%ld...", jiffies);
-	outb_p(0x00, hp_base + HP_CONFIGURE);
-	ei_status.txing = 0;
-	/* Pause just a few cycles for the hardware reset to take place. */
-	udelay(5);
-
-	outb_p(saved_config, hp_base + HP_CONFIGURE);
-	udelay(5);
-
-	if ((inb_p(hp_base+NIC_OFFSET+EN0_ISR) & ENISR_RESET) == 0)
-		printk("%s: hp_reset_8390() did not complete.\n", dev->name);
-
-	if (ei_debug > 1) printk("8390 reset done (%ld).", jiffies);
-}
-
-static void
-hp_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page)
-{
-	int nic_base = dev->base_addr;
-	int saved_config = inb_p(nic_base - NIC_OFFSET + HP_CONFIGURE);
-
-	outb_p(saved_config | HP_DATAON, nic_base - NIC_OFFSET + HP_CONFIGURE);
-	outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base);
-	outb_p(sizeof(struct e8390_pkt_hdr), nic_base + EN0_RCNTLO);
-	outb_p(0, nic_base + EN0_RCNTHI);
-	outb_p(0, nic_base + EN0_RSARLO);	/* On page boundary */
-	outb_p(ring_page, nic_base + EN0_RSARHI);
-	outb_p(E8390_RREAD+E8390_START, nic_base);
-
-	if (ei_status.word16)
-	  insw(nic_base - NIC_OFFSET + HP_DATAPORT, hdr, sizeof(struct e8390_pkt_hdr)>>1);
-	else
-	  insb(nic_base - NIC_OFFSET + HP_DATAPORT, hdr, sizeof(struct e8390_pkt_hdr));
-
-	outb_p(saved_config & (~HP_DATAON), nic_base - NIC_OFFSET + HP_CONFIGURE);
-}
-
-/* Block input and output, similar to the Crynwr packet driver. If you are
-   porting to a new ethercard look at the packet driver source for hints.
-   The HP LAN doesn't use shared memory -- we put the packet
-   out through the "remote DMA" dataport. */
-
-static void
-hp_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset)
-{
-	int nic_base = dev->base_addr;
-	int saved_config = inb_p(nic_base - NIC_OFFSET + HP_CONFIGURE);
-	int xfer_count = count;
-	char *buf = skb->data;
-
-	outb_p(saved_config | HP_DATAON, nic_base - NIC_OFFSET + HP_CONFIGURE);
-	outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base);
-	outb_p(count & 0xff, nic_base + EN0_RCNTLO);
-	outb_p(count >> 8, nic_base + EN0_RCNTHI);
-	outb_p(ring_offset & 0xff, nic_base + EN0_RSARLO);
-	outb_p(ring_offset >> 8, nic_base + EN0_RSARHI);
-	outb_p(E8390_RREAD+E8390_START, nic_base);
-	if (ei_status.word16) {
-	  insw(nic_base - NIC_OFFSET + HP_DATAPORT,buf,count>>1);
-	  if (count & 0x01)
-		buf[count-1] = inb(nic_base - NIC_OFFSET + HP_DATAPORT), xfer_count++;
-	} else {
-		insb(nic_base - NIC_OFFSET + HP_DATAPORT, buf, count);
-	}
-	/* This is for the ALPHA version only, remove for later releases. */
-	if (ei_debug > 0) {			/* DMA termination address check... */
-	  int high = inb_p(nic_base + EN0_RSARHI);
-	  int low = inb_p(nic_base + EN0_RSARLO);
-	  int addr = (high << 8) + low;
-	  /* Check only the lower 8 bits so we can ignore ring wrap. */
-	  if (((ring_offset + xfer_count) & 0xff) != (addr & 0xff))
-		printk("%s: RX transfer address mismatch, %#4.4x vs. %#4.4x (actual).\n",
-			   dev->name, ring_offset + xfer_count, addr);
-	}
-	outb_p(saved_config & (~HP_DATAON), nic_base - NIC_OFFSET + HP_CONFIGURE);
-}
-
-static void
-hp_block_output(struct net_device *dev, int count,
-				const unsigned char *buf, int start_page)
-{
-	int nic_base = dev->base_addr;
-	int saved_config = inb_p(nic_base - NIC_OFFSET + HP_CONFIGURE);
-
-	outb_p(saved_config | HP_DATAON, nic_base - NIC_OFFSET + HP_CONFIGURE);
-	/* Round the count up for word writes.	Do we need to do this?
-	   What effect will an odd byte count have on the 8390?
-	   I should check someday. */
-	if (ei_status.word16 && (count & 0x01))
-	  count++;
-	/* We should already be in page 0, but to be safe... */
-	outb_p(E8390_PAGE0+E8390_START+E8390_NODMA, nic_base);
-
-#ifdef NE8390_RW_BUGFIX
-	/* Handle the read-before-write bug the same way as the
-	   Crynwr packet driver -- the NatSemi method doesn't work. */
-	outb_p(0x42, nic_base + EN0_RCNTLO);
-	outb_p(0,	nic_base + EN0_RCNTHI);
-	outb_p(0xff, nic_base + EN0_RSARLO);
-	outb_p(0x00, nic_base + EN0_RSARHI);
-#define NE_CMD	 	0x00
-	outb_p(E8390_RREAD+E8390_START, nic_base + NE_CMD);
-	/* Make certain that the dummy read has occurred. */
-	inb_p(0x61);
-	inb_p(0x61);
-#endif
-
-	outb_p(count & 0xff, nic_base + EN0_RCNTLO);
-	outb_p(count >> 8,	 nic_base + EN0_RCNTHI);
-	outb_p(0x00, nic_base + EN0_RSARLO);
-	outb_p(start_page, nic_base + EN0_RSARHI);
-
-	outb_p(E8390_RWRITE+E8390_START, nic_base);
-	if (ei_status.word16) {
-		/* Use the 'rep' sequence for 16 bit boards. */
-		outsw(nic_base - NIC_OFFSET + HP_DATAPORT, buf, count>>1);
-	} else {
-		outsb(nic_base - NIC_OFFSET + HP_DATAPORT, buf, count);
-	}
-
-	/* DON'T check for 'inb_p(EN0_ISR) & ENISR_RDC' here -- it's broken! */
-
-	/* This is for the ALPHA version only, remove for later releases. */
-	if (ei_debug > 0) {			/* DMA termination address check... */
-	  int high = inb_p(nic_base + EN0_RSARHI);
-	  int low  = inb_p(nic_base + EN0_RSARLO);
-	  int addr = (high << 8) + low;
-	  if ((start_page << 8) + count != addr)
-		printk("%s: TX Transfer address mismatch, %#4.4x vs. %#4.4x.\n",
-			   dev->name, (start_page << 8) + count, addr);
-	}
-	outb_p(saved_config & (~HP_DATAON), nic_base - NIC_OFFSET + HP_CONFIGURE);
-}
-
-/* This function resets the ethercard if something screws up. */
-static void __init
-hp_init_card(struct net_device *dev)
-{
-	int irq = dev->irq;
-	NS8390p_init(dev, 0);
-	outb_p(irqmap[irq&0x0f] | HP_RUN,
-		   dev->base_addr - NIC_OFFSET + HP_CONFIGURE);
-}
-
-#ifdef MODULE
-#define MAX_HP_CARDS	4	/* Max number of HP cards per module */
-static struct net_device *dev_hp[MAX_HP_CARDS];
-static int io[MAX_HP_CARDS];
-static int irq[MAX_HP_CARDS];
-
-module_param_array(io, int, NULL, 0);
-module_param_array(irq, int, NULL, 0);
-MODULE_PARM_DESC(io, "I/O base address(es)");
-MODULE_PARM_DESC(irq, "IRQ number(s) (assigned)");
-MODULE_DESCRIPTION("HP PC-LAN ISA ethernet driver");
-MODULE_LICENSE("GPL");
-
-/* This is set up so that only a single autoprobe takes place per call.
-ISA device autoprobes on a running machine are not recommended. */
-int __init
-init_module(void)
-{
-	struct net_device *dev;
-	int this_dev, found = 0;
-
-	for (this_dev = 0; this_dev < MAX_HP_CARDS; this_dev++) {
-		if (io[this_dev] == 0)  {
-			if (this_dev != 0) break; /* only autoprobe 1st one */
-			printk(KERN_NOTICE "hp.c: Presently autoprobing (not recommended) for a single card.\n");
-		}
-		dev = alloc_eip_netdev();
-		if (!dev)
-			break;
-		dev->irq = irq[this_dev];
-		dev->base_addr = io[this_dev];
-		if (do_hp_probe(dev) == 0) {
-			dev_hp[found++] = dev;
-			continue;
-		}
-		free_netdev(dev);
-		printk(KERN_WARNING "hp.c: No HP card found (i/o = 0x%x).\n", io[this_dev]);
-		break;
-	}
-	if (found)
-		return 0;
-	return -ENXIO;
-}
-
-static void cleanup_card(struct net_device *dev)
-{
-	free_irq(dev->irq, dev);
-	release_region(dev->base_addr - NIC_OFFSET, HP_IO_EXTENT);
-}
-
-void __exit
-cleanup_module(void)
-{
-	int this_dev;
-
-	for (this_dev = 0; this_dev < MAX_HP_CARDS; this_dev++) {
-		struct net_device *dev = dev_hp[this_dev];
-		if (dev) {
-			unregister_netdev(dev);
-			cleanup_card(dev);
-			free_netdev(dev);
-		}
-	}
-}
-#endif /* MODULE */