gianfar: rx parser

Only let the rx parser be enabled if it is necessary (if VLAN extraction,
IP or TCP checksumming or the rx queue filer are enabled). Otherwise
disable it.

The new routine gfar_check_rx_parser_mode should be run after every
change on this features and will enable/disable the parser as necessary.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: Sebastian Poehn <sebastian.poehn@belden.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 19 insertions, 5 deletions

diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 2dfcc80..dfa55f9 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -2289,6 +2289,23 @@ static int gfar_set_mac_address(struct net_device *dev)
 	return 0;
 }
 
+/* Check if rx parser should be activated */
+void gfar_check_rx_parser_mode(struct gfar_private *priv)
+{
+	struct gfar __iomem *regs;
+	u32 tempval;
+
+	regs = priv->gfargrp[0].regs;
+
+	tempval = gfar_read(&regs->rctrl);
+	/* If parse is no longer required, then disable parser */
+	if (tempval & RCTRL_REQ_PARSER)
+		tempval |= RCTRL_PRSDEP_INIT;
+	else
+		tempval &= ~RCTRL_PRSDEP_INIT;
+	gfar_write(&regs->rctrl, tempval);
+}
+
 
 /* Enables and disables VLAN insertion/extraction */
 static void gfar_vlan_rx_register(struct net_device *dev,
@@ -2325,12 +2342,9 @@ static void gfar_vlan_rx_register(struct net_device *dev,
 		/* Disable VLAN tag extraction */
 		tempval = gfar_read(&regs->rctrl);
 		tempval &= ~RCTRL_VLEX;
-		/* If parse is no longer required, then disable parser */
-		if (tempval & RCTRL_REQ_PARSER)
-			tempval |= RCTRL_PRSDEP_INIT;
-		else
-			tempval &= ~RCTRL_PRSDEP_INIT;
 		gfar_write(&regs->rctrl, tempval);
+
+		gfar_check_rx_parser_mode(priv);
 	}
 
 	gfar_change_mtu(dev, dev->mtu);