Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 689 insertions, 0 deletions

diff --git a/drivers/net/fmv18x.c b/drivers/net/fmv18x.c
new file mode 100644
index 0000000..04c7485
--- /dev/null
+++ b/drivers/net/fmv18x.c
@@ -0,0 +1,689 @@
+/* fmv18x.c: A network device driver for the Fujitsu FMV-181/182/183/184.
+
+	Original: at1700.c (1993-94 by Donald Becker).
+		Copyright 1993 United States Government as represented by the
+		Director, National Security Agency.
+		The author may be reached as becker@scyld.com, or C/O
+			Scyld Computing Corporation
+			410 Severn Ave., Suite 210
+			Annapolis MD 21403
+
+	Modified by Yutaka TAMIYA (tamy@flab.fujitsu.co.jp)
+		Copyright 1994 Fujitsu Laboratories Ltd.
+	Special thanks to:
+		Masayoshi UTAKA (utaka@ace.yk.fujitsu.co.jp)
+			for testing this driver.
+		H. NEGISHI (agy, negishi@sun45.psd.cs.fujitsu.co.jp)
+			for suggestion of some program modification.
+		Masahiro SEKIGUCHI <seki@sysrap.cs.fujitsu.co.jp>
+			for suggestion of some program modification.
+		Kazutoshi MORIOKA (morioka@aurora.oaks.cs.fujitsu.co.jp)
+			for testing this driver.
+
+	This software may be used and distributed according to the terms
+	of the GNU General Public License, incorporated herein by reference.
+
+	This is a device driver for the Fujitsu FMV-181/182/183/184, which
+	is a straight-forward Fujitsu MB86965 implementation.
+
+  Sources:
+    at1700.c
+    The Fujitsu MB86965 datasheet.
+    The Fujitsu FMV-181/182 user's guide
+*/
+
+static const char version[] =
+	"fmv18x.c:v2.2.0 09/24/98  Yutaka TAMIYA (tamy@flab.fujitsu.co.jp)\n";
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/in.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/spinlock.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/delay.h>
+#include <linux/bitops.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/dma.h>
+
+#define DRV_NAME "fmv18x"
+
+static unsigned fmv18x_probe_list[] __initdata = {
+	0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x300, 0x340, 0
+};
+
+/* use 0 for production, 1 for verification, >2 for debug */
+#ifndef NET_DEBUG
+#define NET_DEBUG 1
+#endif
+static unsigned int net_debug = NET_DEBUG;
+
+typedef unsigned char uchar;
+
+/* Information that need to be kept for each board. */
+struct net_local {
+	struct net_device_stats stats;
+	long open_time;				/* Useless example local info. */
+	uint tx_started:1;			/* Number of packet on the Tx queue. */
+	uint tx_queue_ready:1;		/* Tx queue is ready to be sent. */
+	uint rx_started:1;			/* Packets are Rxing. */
+	uchar tx_queue;				/* Number of packet on the Tx queue. */
+	ushort tx_queue_len;		/* Current length of the Tx queue. */
+	spinlock_t lock;
+};
+
+
+/* Offsets from the base address. */
+#define STATUS			0
+#define TX_STATUS		0
+#define RX_STATUS		1
+#define TX_INTR			2		/* Bit-mapped interrupt enable registers. */
+#define RX_INTR			3
+#define TX_MODE			4
+#define RX_MODE			5
+#define CONFIG_0		6		/* Misc. configuration settings. */
+#define CONFIG_1		7
+/* Run-time register bank 2 definitions. */
+#define DATAPORT		8		/* Word-wide DMA or programmed-I/O dataport. */
+#define TX_START		10
+#define COL16CNTL		11		/* Controll Reg for 16 collisions */
+#define MODE13			13
+/* Fujitsu FMV-18x Card Configuration */
+#define	FJ_STATUS0		0x10
+#define	FJ_STATUS1		0x11
+#define	FJ_CONFIG0		0x12
+#define	FJ_CONFIG1		0x13
+#define	FJ_MACADDR		0x14	/* 0x14 - 0x19 */
+#define	FJ_BUFCNTL		0x1A
+#define	FJ_BUFDATA		0x1C
+#define FMV18X_IO_EXTENT	32
+
+/* Index to functions, as function prototypes. */
+
+static int fmv18x_probe1(struct net_device *dev, short ioaddr);
+static int net_open(struct net_device *dev);
+static int net_send_packet(struct sk_buff *skb, struct net_device *dev);
+static irqreturn_t net_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+static void net_rx(struct net_device *dev);
+static void net_timeout(struct net_device *dev);
+static int net_close(struct net_device *dev);
+static struct net_device_stats *net_get_stats(struct net_device *dev);
+static void set_multicast_list(struct net_device *dev);
+
+
+/* Check for a network adaptor of this type, and return '0' iff one exists.
+   If dev->base_addr == 0, probe all likely locations.
+   If dev->base_addr == 1, always return failure.
+   If dev->base_addr == 2, allocate space for the device and return success
+   (detachable devices only).
+   */
+
+static int io = 0x220;
+static int irq;
+
+struct net_device * __init fmv18x_probe(int unit)
+{
+	struct net_device *dev = alloc_etherdev(sizeof(struct net_local));
+	unsigned *port;
+	int err = 0;
+
+	if (!dev)
+		return ERR_PTR(-ENODEV);
+
+	if (unit >= 0) {
+		sprintf(dev->name, "eth%d", unit);
+		netdev_boot_setup_check(dev);
+		io = dev->base_addr;
+		irq = dev->irq;
+	}
+
+	SET_MODULE_OWNER(dev);
+
+	if (io > 0x1ff) {	/* Check a single specified location. */
+		err = fmv18x_probe1(dev, io);
+	} else if (io != 0) {	/* Don't probe at all. */
+		err = -ENXIO;
+	} else {
+		for (port = fmv18x_probe_list; *port; port++)
+			if (fmv18x_probe1(dev, *port) == 0)
+				break;
+		if (!*port)
+			err = -ENODEV;
+	}
+	if (err)
+		goto out;
+	err = register_netdev(dev);
+	if (err)
+		goto out1;
+	return dev;
+out1:
+	free_irq(dev->irq, dev);
+	release_region(dev->base_addr, FMV18X_IO_EXTENT);
+out:
+	free_netdev(dev);
+	return ERR_PTR(err);
+}
+
+/* The Fujitsu datasheet suggests that the NIC be probed for by checking its
+   "signature", the default bit pattern after a reset.  This *doesn't* work --
+   there is no way to reset the bus interface without a complete power-cycle!
+
+   It turns out that ATI came to the same conclusion I did: the only thing
+   that can be done is checking a few bits and then diving right into MAC
+   address check. */
+
+static int __init fmv18x_probe1(struct net_device *dev, short ioaddr)
+{
+	char irqmap[4] = {3, 7, 10, 15};
+	char irqmap_pnp[8] = {3, 4, 5, 7, 9, 10, 11, 15};
+	unsigned int i, retval;
+	struct net_local *lp;
+
+	/* Resetting the chip doesn't reset the ISA interface, so don't bother.
+	   That means we have to be careful with the register values we probe for.
+	   */
+
+	if (!request_region(ioaddr, FMV18X_IO_EXTENT, DRV_NAME))
+		return -EBUSY;
+
+	dev->irq = irq;
+	dev->base_addr = ioaddr;
+
+	/* Check I/O address configuration and Fujitsu vendor code */
+	if (inb(ioaddr+FJ_MACADDR  ) != 0x00
+	||  inb(ioaddr+FJ_MACADDR+1) != 0x00
+	||  inb(ioaddr+FJ_MACADDR+2) != 0x0e) {
+		retval = -ENODEV;
+		goto out;
+	}
+
+	/* Check PnP mode for FMV-183/184/183A/184A. */
+	/* This PnP routine is very poor. IO and IRQ should be known. */
+	if (inb(ioaddr + FJ_STATUS1) & 0x20) {
+		for (i = 0; i < 8; i++) {
+			if (dev->irq == irqmap_pnp[i])
+				break;
+		}
+		if (i == 8) {
+			retval = -ENODEV;
+			goto out;
+		}
+	} else {
+		if (fmv18x_probe_list[inb(ioaddr + FJ_CONFIG0) & 0x07] != ioaddr)
+			return -ENODEV;
+		dev->irq = irqmap[(inb(ioaddr + FJ_CONFIG0)>>6) & 0x03];
+	}
+
+	/* Snarf the interrupt vector now. */
+	retval = request_irq(dev->irq, &net_interrupt, 0, DRV_NAME, dev);
+	if (retval) {
+		printk ("FMV-18x found at %#3x, but it's unusable due to a conflict on"
+				"IRQ %d.\n", ioaddr, dev->irq);
+		goto out;
+	}
+
+	printk("%s: FMV-18x found at %#3x, IRQ %d, address ", dev->name,
+		   ioaddr, dev->irq);
+
+	for(i = 0; i < 6; i++) {
+		unsigned char val = inb(ioaddr + FJ_MACADDR + i);
+		printk("%02x", val);
+		dev->dev_addr[i] = val;
+	}
+
+	/* "FJ_STATUS0" 12 bit 0x0400 means use regular 100 ohm 10baseT signals,
+	   rather than 150 ohm shielded twisted pair compensation.
+	   0x0000 == auto-sense the interface
+	   0x0800 == use TP interface
+	   0x1800 == use coax interface
+	   */
+	{
+		const char *porttype[] = {"auto-sense", "10baseT", "auto-sense", "10base2/5"};
+		ushort setup_value = inb(ioaddr + FJ_STATUS0);
+
+		switch( setup_value & 0x07 ){
+		case 0x01 /* 10base5 */:
+		case 0x02 /* 10base2 */: dev->if_port = 0x18; break;
+		case 0x04 /* 10baseT */: dev->if_port = 0x08; break;
+		default /* auto-sense*/: dev->if_port = 0x00; break;
+		}
+		printk(" %s interface.\n", porttype[(dev->if_port>>3) & 3]);
+	}
+
+	/* Initialize LAN Controller and LAN Card */
+	outb(0xda, ioaddr + CONFIG_0);	 /* Initialize LAN Controller */
+	outb(0x00, ioaddr + CONFIG_1);	 /* Stand by mode */
+	outb(0x00, ioaddr + FJ_CONFIG1); /* Disable IRQ of LAN Card */
+	outb(0x00, ioaddr + FJ_BUFCNTL); /* Reset ? I'm not sure (TAMIYA) */
+
+	/* wait for a while */
+	udelay(200);
+
+	/* Set the station address in bank zero. */
+	outb(0x00, ioaddr + CONFIG_1);
+	for (i = 0; i < 6; i++)
+		outb(dev->dev_addr[i], ioaddr + 8 + i);
+
+	/* Switch to bank 1 and set the multicast table to accept none. */
+	outb(0x04, ioaddr + CONFIG_1);
+	for (i = 0; i < 8; i++)
+		outb(0x00, ioaddr + 8 + i);
+
+	/* Switch to bank 2 and lock our I/O address. */
+	outb(0x08, ioaddr + CONFIG_1);
+	outb(dev->if_port, ioaddr + MODE13);
+	outb(0x00, ioaddr + COL16CNTL);
+
+	if (net_debug)
+		printk(version);
+
+	/* Initialize the device structure. */
+	dev->priv = kmalloc(sizeof(struct net_local), GFP_KERNEL);
+	if (!dev->priv) {
+		retval = -ENOMEM;
+		goto out_irq;
+	}
+	memset(dev->priv, 0, sizeof(struct net_local));
+	lp = dev->priv;
+	spin_lock_init(&lp->lock);
+
+	dev->open		= net_open;
+	dev->stop		= net_close;
+	dev->hard_start_xmit	= net_send_packet;
+	dev->tx_timeout		= net_timeout;
+	dev->watchdog_timeo	= HZ/10;
+	dev->get_stats		= net_get_stats;
+	dev->set_multicast_list = set_multicast_list;
+	return 0;
+
+out_irq:
+	free_irq(dev->irq, dev);
+out:
+	release_region(ioaddr, FMV18X_IO_EXTENT);
+	return retval;
+}
+
+
+static int net_open(struct net_device *dev)
+{
+	struct net_local *lp = dev->priv;
+	int ioaddr = dev->base_addr;
+
+	/* Set the configuration register 0 to 32K 100ns. byte-wide memory,
+	   16 bit bus access, and two 4K Tx, enable the Rx and Tx. */
+	outb(0x5a, ioaddr + CONFIG_0);
+
+	/* Powerup and switch to register bank 2 for the run-time registers. */
+	outb(0xe8, ioaddr + CONFIG_1);
+
+	lp->tx_started = 0;
+	lp->tx_queue_ready = 1;
+	lp->rx_started = 0;
+	lp->tx_queue = 0;
+	lp->tx_queue_len = 0;
+
+	/* Clear Tx and Rx Status */
+	outb(0xff, ioaddr + TX_STATUS);
+	outb(0xff, ioaddr + RX_STATUS);
+	lp->open_time = jiffies;
+
+	netif_start_queue(dev);
+	
+	/* Enable the IRQ of the LAN Card */
+	outb(0x80, ioaddr + FJ_CONFIG1);
+
+	/* Enable both Tx and Rx interrupts */
+	outw(0x8182, ioaddr+TX_INTR);
+
+	return 0;
+}
+
+static void net_timeout(struct net_device *dev)
+{
+	struct net_local *lp = dev->priv;
+	int ioaddr = dev->base_addr;
+	unsigned long flags;
+	
+	
+	printk(KERN_WARNING "%s: transmit timed out with status %04x, %s?\n", dev->name,
+		   htons(inw(ioaddr + TX_STATUS)),
+		   inb(ioaddr + TX_STATUS) & 0x80
+		   ? "IRQ conflict" : "network cable problem");
+	printk(KERN_WARNING "%s: timeout registers: %04x %04x %04x %04x %04x %04x %04x %04x.\n",
+		   dev->name, htons(inw(ioaddr + 0)),
+		   htons(inw(ioaddr + 2)), htons(inw(ioaddr + 4)),
+		   htons(inw(ioaddr + 6)), htons(inw(ioaddr + 8)),
+		   htons(inw(ioaddr +10)), htons(inw(ioaddr +12)),
+		   htons(inw(ioaddr +14)));
+	printk(KERN_WARNING "eth card: %04x %04x\n",
+		htons(inw(ioaddr+FJ_STATUS0)),
+		htons(inw(ioaddr+FJ_CONFIG0)));
+	lp->stats.tx_errors++;
+	/* ToDo: We should try to restart the adaptor... */
+	spin_lock_irqsave(&lp->lock, flags);
+
+	/* Initialize LAN Controller and LAN Card */
+	outb(0xda, ioaddr + CONFIG_0);   /* Initialize LAN Controller */
+	outb(0x00, ioaddr + CONFIG_1);   /* Stand by mode */
+	outb(0x00, ioaddr + FJ_CONFIG1); /* Disable IRQ of LAN Card */
+	outb(0x00, ioaddr + FJ_BUFCNTL); /* Reset ? I'm not sure */
+	net_open(dev);
+	spin_unlock_irqrestore(&lp->lock, flags);
+
+	netif_wake_queue(dev);
+}
+
+static int net_send_packet(struct sk_buff *skb, struct net_device *dev)
+{
+	struct net_local *lp = dev->priv;
+	int ioaddr = dev->base_addr;
+	short length = skb->len;
+	unsigned char *buf;
+	unsigned long flags;
+
+	/* Block a transmit from overlapping.  */
+	
+	if (length > ETH_FRAME_LEN) {
+		if (net_debug)
+			printk("%s: Attempting to send a large packet (%d bytes).\n",
+				dev->name, length);
+		return 1;
+	}
+	
+	if (length < ETH_ZLEN) {
+		skb = skb_padto(skb, ETH_ZLEN);
+		if (skb == NULL)
+			return 0;
+		length = ETH_ZLEN;
+	}
+	buf = skb->data;
+	
+	if (net_debug > 4)
+		printk("%s: Transmitting a packet of length %lu.\n", dev->name,
+			   (unsigned long)skb->len);
+	/* We may not start transmitting unless we finish transferring
+	   a packet into the Tx queue. During executing the following
+	   codes we possibly catch a Tx interrupt. Thus we flag off
+	   tx_queue_ready, so that we prevent the interrupt routine
+	   (net_interrupt) to start transmitting. */
+	spin_lock_irqsave(&lp->lock, flags);
+	lp->tx_queue_ready = 0;
+	{
+		outw(length, ioaddr + DATAPORT);
+		outsw(ioaddr + DATAPORT, buf, (length + 1) >> 1);
+		lp->tx_queue++;
+		lp->tx_queue_len += length + 2;
+	}
+	lp->tx_queue_ready = 1;
+	spin_unlock_irqrestore(&lp->lock, flags);
+
+	if (lp->tx_started == 0) {
+		/* If the Tx is idle, always trigger a transmit. */
+		outb(0x80 | lp->tx_queue, ioaddr + TX_START);
+		lp->tx_queue = 0;
+		lp->tx_queue_len = 0;
+		dev->trans_start = jiffies;
+		lp->tx_started = 1;
+	} else if (lp->tx_queue_len >= 4096 - 1502) /* No room for a packet */
+		netif_stop_queue(dev);
+
+	dev_kfree_skb(skb);
+	return 0;
+}
+
+/* The typical workload of the driver:
+   Handle the network interface interrupts. */
+static irqreturn_t
+net_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	struct net_device *dev = dev_id;
+	struct net_local *lp;
+	int ioaddr, status;
+
+	ioaddr = dev->base_addr;
+	lp = dev->priv;
+	status = inw(ioaddr + TX_STATUS);
+	outw(status, ioaddr + TX_STATUS);
+
+	if (net_debug > 4)
+		printk("%s: Interrupt with status %04x.\n", dev->name, status);
+	if (lp->rx_started == 0 &&
+		(status & 0xff00 || (inb(ioaddr + RX_MODE) & 0x40) == 0)) {
+		/* Got a packet(s).
+		   We cannot execute net_rx more than once at the same time for
+		   the same device. During executing net_rx, we possibly catch a
+		   Tx interrupt. Thus we flag on rx_started, so that we prevent
+		   the interrupt routine (net_interrupt) to dive into net_rx
+		   again. */
+		lp->rx_started = 1;
+		outb(0x00, ioaddr + RX_INTR);	/* Disable RX intr. */
+		net_rx(dev);
+		outb(0x81, ioaddr + RX_INTR);	/* Enable  RX intr. */
+		lp->rx_started = 0;
+	}
+	if (status & 0x00ff) {
+		if (status & 0x02) {
+			/* More than 16 collisions occurred */
+			if (net_debug > 4)
+				printk("%s: 16 Collision occur during Txing.\n", dev->name);
+			/* Cancel sending a packet. */
+			outb(0x03, ioaddr + COL16CNTL);
+			lp->stats.collisions++;
+		}
+		if (status & 0x82) {
+			spin_lock(&lp->lock);
+			lp->stats.tx_packets++;
+			if (lp->tx_queue && lp->tx_queue_ready) {
+				outb(0x80 | lp->tx_queue, ioaddr + TX_START);
+				lp->tx_queue = 0;
+				lp->tx_queue_len = 0;
+				dev->trans_start = jiffies;
+				netif_wake_queue(dev);	/* Inform upper layers. */
+			} else {
+				lp->tx_started = 0;
+				netif_wake_queue(dev);	/* Inform upper layers. */
+			}
+			spin_unlock(&lp->lock);
+		}
+	}
+	return IRQ_RETVAL(status);
+}
+
+/* We have a good packet(s), get it/them out of the buffers. */
+static void net_rx(struct net_device *dev)
+{
+	struct net_local *lp = dev->priv;
+	int ioaddr = dev->base_addr;
+	int boguscount = 5;
+
+	while ((inb(ioaddr + RX_MODE) & 0x40) == 0) {
+		/* Clear PKT_RDY bit: by agy 19940922 */
+		/* outb(0x80, ioaddr + RX_STATUS); */
+		ushort status = inw(ioaddr + DATAPORT);
+
+		if (net_debug > 4)
+			printk("%s: Rxing packet mode %02x status %04x.\n",
+				   dev->name, inb(ioaddr + RX_MODE), status);
+#ifndef final_version
+		if (status == 0) {
+			outb(0x05, ioaddr + 14);
+			break;
+		}
+#endif
+
+		if ((status & 0xF0) != 0x20) {	/* There was an error. */
+			lp->stats.rx_errors++;
+			if (status & 0x08) lp->stats.rx_length_errors++;
+			if (status & 0x04) lp->stats.rx_frame_errors++;
+			if (status & 0x02) lp->stats.rx_crc_errors++;
+			if (status & 0x01) lp->stats.rx_over_errors++;
+		} else {
+			ushort pkt_len = inw(ioaddr + DATAPORT);
+			/* Malloc up new buffer. */
+			struct sk_buff *skb;
+
+			if (pkt_len > 1550) {
+				printk("%s: The FMV-18x claimed a very large packet, size %d.\n",
+					   dev->name, pkt_len);
+				outb(0x05, ioaddr + 14);
+				lp->stats.rx_errors++;
+				break;
+			}
+			skb = dev_alloc_skb(pkt_len+3);
+			if (skb == NULL) {
+				printk("%s: Memory squeeze, dropping packet (len %d).\n",
+					   dev->name, pkt_len);
+				outb(0x05, ioaddr + 14);
+				lp->stats.rx_dropped++;
+				break;
+			}
+			skb->dev = dev;
+			skb_reserve(skb,2);
+
+			insw(ioaddr + DATAPORT, skb_put(skb,pkt_len), (pkt_len + 1) >> 1);
+
+			if (net_debug > 5) {
+				int i;
+				printk("%s: Rxed packet of length %d: ", dev->name, pkt_len);
+				for (i = 0; i < 14; i++)
+					printk(" %02x", skb->data[i]);
+				printk(".\n");
+			}
+
+			skb->protocol=eth_type_trans(skb, dev);
+			netif_rx(skb);
+			dev->last_rx = jiffies;
+			lp->stats.rx_packets++;
+			lp->stats.rx_bytes += pkt_len;
+		}
+		if (--boguscount <= 0)
+			break;
+	}
+
+	/* If any worth-while packets have been received, dev_rint()
+	   has done a mark_bh(NET_BH) for us and will work on them
+	   when we get to the bottom-half routine. */
+	{
+		int i;
+		for (i = 0; i < 20; i++) {
+			if ((inb(ioaddr + RX_MODE) & 0x40) == 0x40)
+				break;
+			(void)inw(ioaddr + DATAPORT);				/* dummy status read */
+			outb(0x05, ioaddr + 14);
+		}
+
+		if (net_debug > 5 && i > 0)
+			printk("%s: Exint Rx packet with mode %02x after %d ticks.\n",
+				   dev->name, inb(ioaddr + RX_MODE), i);
+	}
+
+	return;
+}
+
+/* The inverse routine to net_open(). */
+static int net_close(struct net_device *dev)
+{
+	int ioaddr = dev->base_addr;
+
+	((struct net_local *)dev->priv)->open_time = 0;
+
+	netif_stop_queue(dev);
+	
+	/* Set configuration register 0 to disable Tx and Rx. */
+	outb(0xda, ioaddr + CONFIG_0);
+
+	/* Update the statistics -- ToDo. */
+
+	/* Power-down the chip.  Green, green, green! */
+	outb(0x00, ioaddr + CONFIG_1);
+
+	/* Set the ethernet adaptor disable IRQ */
+	outb(0x00, ioaddr + FJ_CONFIG1);
+
+	return 0;
+}
+
+/* Get the current statistics.	This may be called with the card open or
+   closed. */
+static struct net_device_stats *net_get_stats(struct net_device *dev)
+{
+	struct net_local *lp = dev->priv;
+	return &lp->stats;
+}
+
+/* Set or clear the multicast filter for this adaptor.
+   num_addrs == -1	Promiscuous mode, receive all packets
+   num_addrs == 0	Normal mode, clear multicast list
+   num_addrs > 0	Multicast mode, receive normal and MC packets, and do
+			best-effort filtering.
+ */
+ 
+static void set_multicast_list(struct net_device *dev)
+{
+	short ioaddr = dev->base_addr;
+	if (dev->mc_count || dev->flags&(IFF_PROMISC|IFF_ALLMULTI))
+	{
+		/*
+		 *	We must make the kernel realise we had to move
+		 *	into promisc mode or we start all out war on
+		 *	the cable. - AC
+		 */
+		dev->flags|=IFF_PROMISC;
+
+		outb(3, ioaddr + RX_MODE);	/* Enable promiscuous mode */
+	}
+	else
+		outb(2, ioaddr + RX_MODE);	/* Disable promiscuous, use normal mode */
+}
+
+#ifdef MODULE
+static struct net_device *dev_fmv18x;
+
+MODULE_PARM(io, "i");
+MODULE_PARM(irq, "i");
+MODULE_PARM(net_debug, "i");
+MODULE_PARM_DESC(io, "FMV-18X I/O address");
+MODULE_PARM_DESC(irq, "FMV-18X IRQ number");
+MODULE_PARM_DESC(net_debug, "FMV-18X debug level (0-1,5-6)");
+MODULE_LICENSE("GPL");
+
+int init_module(void)
+{
+	if (io == 0)
+		printk("fmv18x: You should not use auto-probing with insmod!\n");
+	dev_fmv18x = fmv18x_probe(-1);
+	if (IS_ERR(dev_fmv18x))
+		return PTR_ERR(dev_fmv18x);
+	return 0;
+}
+
+void
+cleanup_module(void)
+{
+	unregister_netdev(dev_fmv18x);
+	free_irq(dev_fmv18x->irq, dev_fmv18x);
+	release_region(dev_fmv18x->base_addr, FMV18X_IO_EXTENT);
+	free_netdev(dev_fmv18x);
+}
+#endif /* MODULE */
+
+/*
+ * Local variables:
+ *  compile-command: "gcc -D__KERNEL__ -I/usr/src/linux/net/inet -Wall -Wstrict-prototypes -O6 -m486 -c fmv18x.c"
+ *  version-control: t
+ *  kept-new-versions: 5
+ *  tab-width: 4
+ *  c-indent-level: 4
+ * End:
+ */