fddi: Move the FDDI drivers

Move the FDDI drivers into drivers/net/fddi/ and make the
necessary Kconfig and Makefile changes.

CC: "Maciej W. Rozycki" <macro@linux-mips.org>
CC: Christoph Goos <cgoos@syskonnect.de>
CC: <linux@syskonnect.de>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

41 files changed, 28596 insertions, 0 deletions

diff --git a/drivers/net/fddi/Kconfig b/drivers/net/fddi/Kconfig
new file mode 100644
index 0000000..3a424c8
--- /dev/null
+++ b/drivers/net/fddi/Kconfig
@@ -0,0 +1,77 @@
+#
+# FDDI network device configuration
+#
+
+config FDDI
+	tristate "FDDI driver support"
+	depends on PCI || EISA || TC
+	---help---
+	  Fiber Distributed Data Interface is a high speed local area network
+	  design; essentially a replacement for high speed Ethernet. FDDI can
+	  run over copper or fiber. If you are connected to such a network and
+	  want a driver for the FDDI card in your computer, say Y here (and
+	  then also Y to the driver for your FDDI card, below). Most people
+	  will say N.
+
+if FDDI
+
+config DEFXX
+	tristate "Digital DEFTA/DEFEA/DEFPA adapter support"
+	depends on FDDI && (PCI || EISA || TC)
+	---help---
+	  This is support for the DIGITAL series of TURBOchannel (DEFTA),
+	  EISA (DEFEA) and PCI (DEFPA) controllers which can connect you
+	  to a local FDDI network.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called defxx.  If unsure, say N.
+
+config DEFXX_MMIO
+	bool
+	prompt "Use MMIO instead of PIO" if PCI || EISA
+	depends on DEFXX
+	default n if PCI || EISA
+	default y
+	---help---
+	  This instructs the driver to use EISA or PCI memory-mapped I/O
+	  (MMIO) as appropriate instead of programmed I/O ports (PIO).
+	  Enabling this gives an improvement in processing time in parts
+	  of the driver, but it may cause problems with EISA (DEFEA)
+	  adapters.  TURBOchannel does not have the concept of I/O ports,
+	  so MMIO is always used for these (DEFTA) adapters.
+
+	  If unsure, say N.
+
+config SKFP
+	tristate "SysKonnect FDDI PCI support"
+	depends on FDDI && PCI
+	select BITREVERSE
+	---help---
+	  Say Y here if you have a SysKonnect FDDI PCI adapter.
+	  The following adapters are supported by this driver:
+	  - SK-5521 (SK-NET FDDI-UP)
+	  - SK-5522 (SK-NET FDDI-UP DAS)
+	  - SK-5541 (SK-NET FDDI-FP)
+	  - SK-5543 (SK-NET FDDI-LP)
+	  - SK-5544 (SK-NET FDDI-LP DAS)
+	  - SK-5821 (SK-NET FDDI-UP64)
+	  - SK-5822 (SK-NET FDDI-UP64 DAS)
+	  - SK-5841 (SK-NET FDDI-FP64)
+	  - SK-5843 (SK-NET FDDI-LP64)
+	  - SK-5844 (SK-NET FDDI-LP64 DAS)
+	  - Netelligent 100 FDDI DAS Fibre SC
+	  - Netelligent 100 FDDI SAS Fibre SC
+	  - Netelligent 100 FDDI DAS UTP
+	  - Netelligent 100 FDDI SAS UTP
+	  - Netelligent 100 FDDI SAS Fibre MIC
+
+	  Read <file:Documentation/networking/skfp.txt> for information about
+	  the driver.
+
+	  Questions concerning this driver can be addressed to:
+	  <linux@syskonnect.de>
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called skfp.  This is recommended.
+
+endif # FDDI
diff --git a/drivers/net/fddi/Makefile b/drivers/net/fddi/Makefile
new file mode 100644
index 0000000..36da19c
--- /dev/null
+++ b/drivers/net/fddi/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the Linux FDDI network device drivers.
+#
+
+obj-$(CONFIG_DEFXX) += defxx.o
+obj-$(CONFIG_SKFP) += skfp/
diff --git a/drivers/net/fddi/defxx.c b/drivers/net/fddi/defxx.c
new file mode 100644
index 0000000..4ad80f77
--- /dev/null
+++ b/drivers/net/fddi/defxx.c
@@ -0,0 +1,3739 @@
+/*
+ * File Name:
+ *   defxx.c
+ *
+ * Copyright Information:
+ *   Copyright Digital Equipment Corporation 1996.
+ *
+ *   This software may be used and distributed according to the terms of
+ *   the GNU General Public License, incorporated herein by reference.
+ *
+ * Abstract:
+ *   A Linux device driver supporting the Digital Equipment Corporation
+ *   FDDI TURBOchannel, EISA and PCI controller families.  Supported
+ *   adapters include:
+ *
+ *		DEC FDDIcontroller/TURBOchannel (DEFTA)
+ *		DEC FDDIcontroller/EISA         (DEFEA)
+ *		DEC FDDIcontroller/PCI          (DEFPA)
+ *
+ * The original author:
+ *   LVS	Lawrence V. Stefani <lstefani@yahoo.com>
+ *
+ * Maintainers:
+ *   macro	Maciej W. Rozycki <macro@linux-mips.org>
+ *
+ * Credits:
+ *   I'd like to thank Patricia Cross for helping me get started with
+ *   Linux, David Davies for a lot of help upgrading and configuring
+ *   my development system and for answering many OS and driver
+ *   development questions, and Alan Cox for recommendations and
+ *   integration help on getting FDDI support into Linux.  LVS
+ *
+ * Driver Architecture:
+ *   The driver architecture is largely based on previous driver work
+ *   for other operating systems.  The upper edge interface and
+ *   functions were largely taken from existing Linux device drivers
+ *   such as David Davies' DE4X5.C driver and Donald Becker's TULIP.C
+ *   driver.
+ *
+ *   Adapter Probe -
+ *		The driver scans for supported EISA adapters by reading the
+ *		SLOT ID register for each EISA slot and making a match
+ *		against the expected value.
+ *
+ *   Bus-Specific Initialization -
+ *		This driver currently supports both EISA and PCI controller
+ *		families.  While the custom DMA chip and FDDI logic is similar
+ *		or identical, the bus logic is very different.  After
+ *		initialization, the	only bus-specific differences is in how the
+ *		driver enables and disables interrupts.  Other than that, the
+ *		run-time critical code behaves the same on both families.
+ *		It's important to note that both adapter families are configured
+ *		to I/O map, rather than memory map, the adapter registers.
+ *
+ *   Driver Open/Close -
+ *		In the driver open routine, the driver ISR (interrupt service
+ *		routine) is registered and the adapter is brought to an
+ *		operational state.  In the driver close routine, the opposite
+ *		occurs; the driver ISR is deregistered and the adapter is
+ *		brought to a safe, but closed state.  Users may use consecutive
+ *		commands to bring the adapter up and down as in the following
+ *		example:
+ *					ifconfig fddi0 up
+ *					ifconfig fddi0 down
+ *					ifconfig fddi0 up
+ *
+ *   Driver Shutdown -
+ *		Apparently, there is no shutdown or halt routine support under
+ *		Linux.  This routine would be called during "reboot" or
+ *		"shutdown" to allow the driver to place the adapter in a safe
+ *		state before a warm reboot occurs.  To be really safe, the user
+ *		should close the adapter before shutdown (eg. ifconfig fddi0 down)
+ *		to ensure that the adapter DMA engine is taken off-line.  However,
+ *		the current driver code anticipates this problem and always issues
+ *		a soft reset of the adapter	at the beginning of driver initialization.
+ *		A future driver enhancement in this area may occur in 2.1.X where
+ *		Alan indicated that a shutdown handler may be implemented.
+ *
+ *   Interrupt Service Routine -
+ *		The driver supports shared interrupts, so the ISR is registered for
+ *		each board with the appropriate flag and the pointer to that board's
+ *		device structure.  This provides the context during interrupt
+ *		processing to support shared interrupts and multiple boards.
+ *
+ *		Interrupt enabling/disabling can occur at many levels.  At the host
+ *		end, you can disable system interrupts, or disable interrupts at the
+ *		PIC (on Intel systems).  Across the bus, both EISA and PCI adapters
+ *		have a bus-logic chip interrupt enable/disable as well as a DMA
+ *		controller interrupt enable/disable.
+ *
+ *		The driver currently enables and disables adapter interrupts at the
+ *		bus-logic chip and assumes that Linux will take care of clearing or
+ *		acknowledging any host-based interrupt chips.
+ *
+ *   Control Functions -
+ *		Control functions are those used to support functions such as adding
+ *		or deleting multicast addresses, enabling or disabling packet
+ *		reception filters, or other custom/proprietary commands.  Presently,
+ *		the driver supports the "get statistics", "set multicast list", and
+ *		"set mac address" functions defined by Linux.  A list of possible
+ *		enhancements include:
+ *
+ *				- Custom ioctl interface for executing port interface commands
+ *				- Custom ioctl interface for adding unicast addresses to
+ *				  adapter CAM (to support bridge functions).
+ *				- Custom ioctl interface for supporting firmware upgrades.
+ *
+ *   Hardware (port interface) Support Routines -
+ *		The driver function names that start with "dfx_hw_" represent
+ *		low-level port interface routines that are called frequently.  They
+ *		include issuing a DMA or port control command to the adapter,
+ *		resetting the adapter, or reading the adapter state.  Since the
+ *		driver initialization and run-time code must make calls into the
+ *		port interface, these routines were written to be as generic and
+ *		usable as possible.
+ *
+ *   Receive Path -
+ *		The adapter DMA engine supports a 256 entry receive descriptor block
+ *		of which up to 255 entries can be used at any given time.  The
+ *		architecture is a standard producer, consumer, completion model in
+ *		which the driver "produces" receive buffers to the adapter, the
+ *		adapter "consumes" the receive buffers by DMAing incoming packet data,
+ *		and the driver "completes" the receive buffers by servicing the
+ *		incoming packet, then "produces" a new buffer and starts the cycle
+ *		again.  Receive buffers can be fragmented in up to 16 fragments
+ *		(descriptor	entries).  For simplicity, this driver posts
+ *		single-fragment receive buffers of 4608 bytes, then allocates a
+ *		sk_buff, copies the data, then reposts the buffer.  To reduce CPU
+ *		utilization, a better approach would be to pass up the receive
+ *		buffer (no extra copy) then allocate and post a replacement buffer.
+ *		This is a performance enhancement that should be looked into at
+ *		some point.
+ *
+ *   Transmit Path -
+ *		Like the receive path, the adapter DMA engine supports a 256 entry
+ *		transmit descriptor block of which up to 255 entries can be used at
+ *		any	given time.  Transmit buffers can be fragmented	in up to 255
+ *		fragments (descriptor entries).  This driver always posts one
+ *		fragment per transmit packet request.
+ *
+ *		The fragment contains the entire packet from FC to end of data.
+ *		Before posting the buffer to the adapter, the driver sets a three-byte
+ *		packet request header (PRH) which is required by the Motorola MAC chip
+ *		used on the adapters.  The PRH tells the MAC the type of token to
+ *		receive/send, whether or not to generate and append the CRC, whether
+ *		synchronous or asynchronous framing is used, etc.  Since the PRH
+ *		definition is not necessarily consistent across all FDDI chipsets,
+ *		the driver, rather than the common FDDI packet handler routines,
+ *		sets these bytes.
+ *
+ *		To reduce the amount of descriptor fetches needed per transmit request,
+ *		the driver takes advantage of the fact that there are at least three
+ *		bytes available before the skb->data field on the outgoing transmit
+ *		request.  This is guaranteed by having fddi_setup() in net_init.c set
+ *		dev->hard_header_len to 24 bytes.  21 bytes accounts for the largest
+ *		header in an 802.2 SNAP frame.  The other 3 bytes are the extra "pad"
+ *		bytes which we'll use to store the PRH.
+ *
+ *		There's a subtle advantage to adding these pad bytes to the
+ *		hard_header_len, it ensures that the data portion of the packet for
+ *		an 802.2 SNAP frame is longword aligned.  Other FDDI driver
+ *		implementations may not need the extra padding and can start copying
+ *		or DMAing directly from the FC byte which starts at skb->data.  Should
+ *		another driver implementation need ADDITIONAL padding, the net_init.c
+ *		module should be updated and dev->hard_header_len should be increased.
+ *		NOTE: To maintain the alignment on the data portion of the packet,
+ *		dev->hard_header_len should always be evenly divisible by 4 and at
+ *		least 24 bytes in size.
+ *
+ * Modification History:
+ *		Date		Name	Description
+ *		16-Aug-96	LVS		Created.
+ *		20-Aug-96	LVS		Updated dfx_probe so that version information
+ *							string is only displayed if 1 or more cards are
+ *							found.  Changed dfx_rcv_queue_process to copy
+ *							3 NULL bytes before FC to ensure that data is
+ *							longword aligned in receive buffer.
+ *		09-Sep-96	LVS		Updated dfx_ctl_set_multicast_list to enable
+ *							LLC group promiscuous mode if multicast list
+ *							is too large.  LLC individual/group promiscuous
+ *							mode is now disabled if IFF_PROMISC flag not set.
+ *							dfx_xmt_queue_pkt no longer checks for NULL skb
+ *							on Alan Cox recommendation.  Added node address
+ *							override support.
+ *		12-Sep-96	LVS		Reset current address to factory address during
+ *							device open.  Updated transmit path to post a
+ *							single fragment which includes PRH->end of data.
+ *		Mar 2000	AC		Did various cleanups for 2.3.x
+ *		Jun 2000	jgarzik		PCI and resource alloc cleanups
+ *		Jul 2000	tjeerd		Much cleanup and some bug fixes
+ *		Sep 2000	tjeerd		Fix leak on unload, cosmetic code cleanup
+ *		Feb 2001			Skb allocation fixes
+ *		Feb 2001	davej		PCI enable cleanups.
+ *		04 Aug 2003	macro		Converted to the DMA API.
+ *		14 Aug 2004	macro		Fix device names reported.
+ *		14 Jun 2005	macro		Use irqreturn_t.
+ *		23 Oct 2006	macro		Big-endian host support.
+ *		14 Dec 2006	macro		TURBOchannel support.
+ */
+
+/* Include files */
+#include <linux/bitops.h>
+#include <linux/compiler.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/eisa.h>
+#include <linux/errno.h>
+#include <linux/fddidevice.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/pci.h>
+#include <linux/skbuff.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/tc.h>
+
+#include <asm/byteorder.h>
+#include <asm/io.h>
+
+#include "defxx.h"
+
+/* Version information string should be updated prior to each new release!  */
+#define DRV_NAME "defxx"
+#define DRV_VERSION "v1.10"
+#define DRV_RELDATE "2006/12/14"
+
+static char version[] __devinitdata =
+	DRV_NAME ": " DRV_VERSION " " DRV_RELDATE
+	"  Lawrence V. Stefani and others\n";
+
+#define DYNAMIC_BUFFERS 1
+
+#define SKBUFF_RX_COPYBREAK 200
+/*
+ * NEW_SKB_SIZE = PI_RCV_DATA_K_SIZE_MAX+128 to allow 128 byte
+ * alignment for compatibility with old EISA boards.
+ */
+#define NEW_SKB_SIZE (PI_RCV_DATA_K_SIZE_MAX+128)
+
+#ifdef CONFIG_PCI
+#define DFX_BUS_PCI(dev) (dev->bus == &pci_bus_type)
+#else
+#define DFX_BUS_PCI(dev) 0
+#endif
+
+#ifdef CONFIG_EISA
+#define DFX_BUS_EISA(dev) (dev->bus == &eisa_bus_type)
+#else
+#define DFX_BUS_EISA(dev) 0
+#endif
+
+#ifdef CONFIG_TC
+#define DFX_BUS_TC(dev) (dev->bus == &tc_bus_type)
+#else
+#define DFX_BUS_TC(dev) 0
+#endif
+
+#ifdef CONFIG_DEFXX_MMIO
+#define DFX_MMIO 1
+#else
+#define DFX_MMIO 0
+#endif
+
+/* Define module-wide (static) routines */
+
+static void		dfx_bus_init(struct net_device *dev);
+static void		dfx_bus_uninit(struct net_device *dev);
+static void		dfx_bus_config_check(DFX_board_t *bp);
+
+static int		dfx_driver_init(struct net_device *dev,
+					const char *print_name,
+					resource_size_t bar_start);
+static int		dfx_adap_init(DFX_board_t *bp, int get_buffers);
+
+static int		dfx_open(struct net_device *dev);
+static int		dfx_close(struct net_device *dev);
+
+static void		dfx_int_pr_halt_id(DFX_board_t *bp);
+static void		dfx_int_type_0_process(DFX_board_t *bp);
+static void		dfx_int_common(struct net_device *dev);
+static irqreturn_t	dfx_interrupt(int irq, void *dev_id);
+
+static struct		net_device_stats *dfx_ctl_get_stats(struct net_device *dev);
+static void		dfx_ctl_set_multicast_list(struct net_device *dev);
+static int		dfx_ctl_set_mac_address(struct net_device *dev, void *addr);
+static int		dfx_ctl_update_cam(DFX_board_t *bp);
+static int		dfx_ctl_update_filters(DFX_board_t *bp);
+
+static int		dfx_hw_dma_cmd_req(DFX_board_t *bp);
+static int		dfx_hw_port_ctrl_req(DFX_board_t *bp, PI_UINT32	command, PI_UINT32 data_a, PI_UINT32 data_b, PI_UINT32 *host_data);
+static void		dfx_hw_adap_reset(DFX_board_t *bp, PI_UINT32 type);
+static int		dfx_hw_adap_state_rd(DFX_board_t *bp);
+static int		dfx_hw_dma_uninit(DFX_board_t *bp, PI_UINT32 type);
+
+static int		dfx_rcv_init(DFX_board_t *bp, int get_buffers);
+static void		dfx_rcv_queue_process(DFX_board_t *bp);
+static void		dfx_rcv_flush(DFX_board_t *bp);
+
+static netdev_tx_t dfx_xmt_queue_pkt(struct sk_buff *skb,
+				     struct net_device *dev);
+static int		dfx_xmt_done(DFX_board_t *bp);
+static void		dfx_xmt_flush(DFX_board_t *bp);
+
+/* Define module-wide (static) variables */
+
+static struct pci_driver dfx_pci_driver;
+static struct eisa_driver dfx_eisa_driver;
+static struct tc_driver dfx_tc_driver;
+
+
+/*
+ * =======================
+ * = dfx_port_write_long =
+ * = dfx_port_read_long  =
+ * =======================
+ *
+ * Overview:
+ *   Routines for reading and writing values from/to adapter
+ *
+ * Returns:
+ *   None
+ *
+ * Arguments:
+ *   bp		- pointer to board information
+ *   offset	- register offset from base I/O address
+ *   data	- for dfx_port_write_long, this is a value to write;
+ *		  for dfx_port_read_long, this is a pointer to store
+ *		  the read value
+ *
+ * Functional Description:
+ *   These routines perform the correct operation to read or write
+ *   the adapter register.
+ *
+ *   EISA port block base addresses are based on the slot number in which the
+ *   controller is installed.  For example, if the EISA controller is installed
+ *   in slot 4, the port block base address is 0x4000.  If the controller is
+ *   installed in slot 2, the port block base address is 0x2000, and so on.
+ *   This port block can be used to access PDQ, ESIC, and DEFEA on-board
+ *   registers using the register offsets defined in DEFXX.H.
+ *
+ *   PCI port block base addresses are assigned by the PCI BIOS or system
+ *   firmware.  There is one 128 byte port block which can be accessed.  It
+ *   allows for I/O mapping of both PDQ and PFI registers using the register
+ *   offsets defined in DEFXX.H.
+ *
+ * Return Codes:
+ *   None
+ *
+ * Assumptions:
+ *   bp->base is a valid base I/O address for this adapter.
+ *   offset is a valid register offset for this adapter.
+ *
+ * Side Effects:
+ *   Rather than produce macros for these functions, these routines
+ *   are defined using "inline" to ensure that the compiler will
+ *   generate inline code and not waste a procedure call and return.
+ *   This provides all the benefits of macros, but with the
+ *   advantage of strict data type checking.
+ */
+
+static inline void dfx_writel(DFX_board_t *bp, int offset, u32 data)
+{
+	writel(data, bp->base.mem + offset);
+	mb();
+}
+
+static inline void dfx_outl(DFX_board_t *bp, int offset, u32 data)
+{
+	outl(data, bp->base.port + offset);
+}
+
+static void dfx_port_write_long(DFX_board_t *bp, int offset, u32 data)
+{
+	struct device __maybe_unused *bdev = bp->bus_dev;
+	int dfx_bus_tc = DFX_BUS_TC(bdev);
+	int dfx_use_mmio = DFX_MMIO || dfx_bus_tc;
+
+	if (dfx_use_mmio)
+		dfx_writel(bp, offset, data);
+	else
+		dfx_outl(bp, offset, data);
+}
+
+
+static inline void dfx_readl(DFX_board_t *bp, int offset, u32 *data)
+{
+	mb();
+	*data = readl(bp->base.mem + offset);
+}
+
+static inline void dfx_inl(DFX_board_t *bp, int offset, u32 *data)
+{
+	*data = inl(bp->base.port + offset);
+}
+
+static void dfx_port_read_long(DFX_board_t *bp, int offset, u32 *data)
+{
+	struct device __maybe_unused *bdev = bp->bus_dev;
+	int dfx_bus_tc = DFX_BUS_TC(bdev);
+	int dfx_use_mmio = DFX_MMIO || dfx_bus_tc;
+
+	if (dfx_use_mmio)
+		dfx_readl(bp, offset, data);
+	else
+		dfx_inl(bp, offset, data);
+}
+
+
+/*
+ * ================
+ * = dfx_get_bars =
+ * ================
+ *
+ * Overview:
+ *   Retrieves the address range used to access control and status
+ *   registers.
+ *
+ * Returns:
+ *   None
+ *
+ * Arguments:
+ *   bdev	- pointer to device information
+ *   bar_start	- pointer to store the start address
+ *   bar_len	- pointer to store the length of the area
+ *
+ * Assumptions:
+ *   I am sure there are some.
+ *
+ * Side Effects:
+ *   None
+ */
+static void dfx_get_bars(struct device *bdev,
+			 resource_size_t *bar_start, resource_size_t *bar_len)
+{
+	int dfx_bus_pci = DFX_BUS_PCI(bdev);
+	int dfx_bus_eisa = DFX_BUS_EISA(bdev);
+	int dfx_bus_tc = DFX_BUS_TC(bdev);
+	int dfx_use_mmio = DFX_MMIO || dfx_bus_tc;
+
+	if (dfx_bus_pci) {
+		int num = dfx_use_mmio ? 0 : 1;
+
+		*bar_start = pci_resource_start(to_pci_dev(bdev), num);
+		*bar_len = pci_resource_len(to_pci_dev(bdev), num);
+	}
+	if (dfx_bus_eisa) {
+		unsigned long base_addr = to_eisa_device(bdev)->base_addr;
+		resource_size_t bar;
+
+		if (dfx_use_mmio) {
+			bar = inb(base_addr + PI_ESIC_K_MEM_ADD_CMP_2);
+			bar <<= 8;
+			bar |= inb(base_addr + PI_ESIC_K_MEM_ADD_CMP_1);
+			bar <<= 8;
+			bar |= inb(base_addr + PI_ESIC_K_MEM_ADD_CMP_0);
+			bar <<= 16;
+			*bar_start = bar;
+			bar = inb(base_addr + PI_ESIC_K_MEM_ADD_MASK_2);
+			bar <<= 8;
+			bar |= inb(base_addr + PI_ESIC_K_MEM_ADD_MASK_1);
+			bar <<= 8;
+			bar |= inb(base_addr + PI_ESIC_K_MEM_ADD_MASK_0);
+			bar <<= 16;
+			*bar_len = (bar | PI_MEM_ADD_MASK_M) + 1;
+		} else {
+			*bar_start = base_addr;
+			*bar_len = PI_ESIC_K_CSR_IO_LEN;
+		}
+	}
+	if (dfx_bus_tc) {
+		*bar_start = to_tc_dev(bdev)->resource.start +
+			     PI_TC_K_CSR_OFFSET;
+		*bar_len = PI_TC_K_CSR_LEN;
+	}
+}
+
+static const struct net_device_ops dfx_netdev_ops = {
+	.ndo_open		= dfx_open,
+	.ndo_stop		= dfx_close,
+	.ndo_start_xmit		= dfx_xmt_queue_pkt,
+	.ndo_get_stats		= dfx_ctl_get_stats,
+	.ndo_set_rx_mode	= dfx_ctl_set_multicast_list,
+	.ndo_set_mac_address	= dfx_ctl_set_mac_address,
+};
+
+/*
+ * ================
+ * = dfx_register =
+ * ================
+ *
+ * Overview:
+ *   Initializes a supported FDDI controller
+ *
+ * Returns:
+ *   Condition code
+ *
+ * Arguments:
+ *   bdev - pointer to device information
+ *
+ * Functional Description:
+ *
+ * Return Codes:
+ *   0		 - This device (fddi0, fddi1, etc) configured successfully
+ *   -EBUSY      - Failed to get resources, or dfx_driver_init failed.
+ *
+ * Assumptions:
+ *   It compiles so it should work :-( (PCI cards do :-)
+ *
+ * Side Effects:
+ *   Device structures for FDDI adapters (fddi0, fddi1, etc) are
+ *   initialized and the board resources are read and stored in
+ *   the device structure.
+ */
+static int __devinit dfx_register(struct device *bdev)
+{
+	static int version_disp;
+	int dfx_bus_pci = DFX_BUS_PCI(bdev);
+	int dfx_bus_tc = DFX_BUS_TC(bdev);
+	int dfx_use_mmio = DFX_MMIO || dfx_bus_tc;
+	const char *print_name = dev_name(bdev);
+	struct net_device *dev;
+	DFX_board_t	  *bp;			/* board pointer */
+	resource_size_t bar_start = 0;		/* pointer to port */
+	resource_size_t bar_len = 0;		/* resource length */
+	int alloc_size;				/* total buffer size used */
+	struct resource *region;
+	int err = 0;
+
+	if (!version_disp) {	/* display version info if adapter is found */
+		version_disp = 1;	/* set display flag to TRUE so that */
+		printk(version);	/* we only display this string ONCE */
+	}
+
+	dev = alloc_fddidev(sizeof(*bp));
+	if (!dev) {
+		printk(KERN_ERR "%s: Unable to allocate fddidev, aborting\n",
+		       print_name);
+		return -ENOMEM;
+	}
+
+	/* Enable PCI device. */
+	if (dfx_bus_pci && pci_enable_device(to_pci_dev(bdev))) {
+		printk(KERN_ERR "%s: Cannot enable PCI device, aborting\n",
+		       print_name);
+		goto err_out;
+	}
+
+	SET_NETDEV_DEV(dev, bdev);
+
+	bp = netdev_priv(dev);
+	bp->bus_dev = bdev;
+	dev_set_drvdata(bdev, dev);
+
+	dfx_get_bars(bdev, &bar_start, &bar_len);
+
+	if (dfx_use_mmio)
+		region = request_mem_region(bar_start, bar_len, print_name);
+	else
+		region = request_region(bar_start, bar_len, print_name);
+	if (!region) {
+		printk(KERN_ERR "%s: Cannot reserve I/O resource "
+		       "0x%lx @ 0x%lx, aborting\n",
+		       print_name, (long)bar_len, (long)bar_start);
+		err = -EBUSY;
+		goto err_out_disable;
+	}
+
+	/* Set up I/O base address. */
+	if (dfx_use_mmio) {
+		bp->base.mem = ioremap_nocache(bar_start, bar_len);
+		if (!bp->base.mem) {
+			printk(KERN_ERR "%s: Cannot map MMIO\n", print_name);
+			err = -ENOMEM;
+			goto err_out_region;
+		}
+	} else {
+		bp->base.port = bar_start;
+		dev->base_addr = bar_start;
+	}
+
+	/* Initialize new device structure */
+	dev->netdev_ops			= &dfx_netdev_ops;
+
+	if (dfx_bus_pci)
+		pci_set_master(to_pci_dev(bdev));
+
+	if (dfx_driver_init(dev, print_name, bar_start) != DFX_K_SUCCESS) {
+		err = -ENODEV;
+		goto err_out_unmap;
+	}
+
+	err = register_netdev(dev);
+	if (err)
+		goto err_out_kfree;
+
+	printk("%s: registered as %s\n", print_name, dev->name);
+	return 0;
+
+err_out_kfree:
+	alloc_size = sizeof(PI_DESCR_BLOCK) +
+		     PI_CMD_REQ_K_SIZE_MAX + PI_CMD_RSP_K_SIZE_MAX +
+#ifndef DYNAMIC_BUFFERS
+		     (bp->rcv_bufs_to_post * PI_RCV_DATA_K_SIZE_MAX) +
+#endif
+		     sizeof(PI_CONSUMER_BLOCK) +
+		     (PI_ALIGN_K_DESC_BLK - 1);
+	if (bp->kmalloced)
+		dma_free_coherent(bdev, alloc_size,
+				  bp->kmalloced, bp->kmalloced_dma);
+
+err_out_unmap:
+	if (dfx_use_mmio)
+		iounmap(bp->base.mem);
+
+err_out_region:
+	if (dfx_use_mmio)
+		release_mem_region(bar_start, bar_len);
+	else
+		release_region(bar_start, bar_len);
+
+err_out_disable:
+	if (dfx_bus_pci)
+		pci_disable_device(to_pci_dev(bdev));
+
+err_out:
+	free_netdev(dev);
+	return err;
+}
+
+
+/*
+ * ================
+ * = dfx_bus_init =
+ * ================
+ *
+ * Overview:
+ *   Initializes the bus-specific controller logic.
+ *
+ * Returns:
+ *   None
+ *
+ * Arguments:
+ *   dev - pointer to device information
+ *
+ * Functional Description:
+ *   Determine and save adapter IRQ in device table,
+ *   then perform bus-specific logic initialization.
+ *
+ * Return Codes:
+ *   None
+ *
+ * Assumptions:
+ *   bp->base has already been set with the proper
+ *	 base I/O address for this device.
+ *
+ * Side Effects:
+ *   Interrupts are enabled at the adapter bus-specific logic.
+ *   Note:  Interrupts at the DMA engine (PDQ chip) are not
+ *   enabled yet.
+ */
+
+static void __devinit dfx_bus_init(struct net_device *dev)
+{
+	DFX_board_t *bp = netdev_priv(dev);
+	struct device *bdev = bp->bus_dev;
+	int dfx_bus_pci = DFX_BUS_PCI(bdev);
+	int dfx_bus_eisa = DFX_BUS_EISA(bdev);
+	int dfx_bus_tc = DFX_BUS_TC(bdev);
+	int dfx_use_mmio = DFX_MMIO || dfx_bus_tc;
+	u8 val;
+
+	DBG_printk("In dfx_bus_init...\n");
+
+	/* Initialize a pointer back to the net_device struct */
+	bp->dev = dev;
+
+	/* Initialize adapter based on bus type */
+
+	if (dfx_bus_tc)
+		dev->irq = to_tc_dev(bdev)->interrupt;
+	if (dfx_bus_eisa) {
+		unsigned long base_addr = to_eisa_device(bdev)->base_addr;
+
+		/* Get the interrupt level from the ESIC chip.  */
+		val = inb(base_addr + PI_ESIC_K_IO_CONFIG_STAT_0);
+		val &= PI_CONFIG_STAT_0_M_IRQ;
+		val >>= PI_CONFIG_STAT_0_V_IRQ;
+
+		switch (val) {
+		case PI_CONFIG_STAT_0_IRQ_K_9:
+			dev->irq = 9;
+			break;
+
+		case PI_CONFIG_STAT_0_IRQ_K_10:
+			dev->irq = 10;
+			break;
+
+		case PI_CONFIG_STAT_0_IRQ_K_11:
+			dev->irq = 11;
+			break;
+
+		case PI_CONFIG_STAT_0_IRQ_K_15:
+			dev->irq = 15;
+			break;
+		}
+
+		/*
+		 * Enable memory decoding (MEMCS0) and/or port decoding
+		 * (IOCS1/IOCS0) as appropriate in Function Control
+		 * Register.  One of the port chip selects seems to be
+		 * used for the Burst Holdoff register, but this bit of
+		 * documentation is missing and as yet it has not been
+		 * determined which of the two.  This is also the reason
+		 * the size of the decoded port range is twice as large
+		 * as one required by the PDQ.
+		 */
+
+		/* Set the decode range of the board.  */
+		val = ((bp->base.port >> 12) << PI_IO_CMP_V_SLOT);
+		outb(base_addr + PI_ESIC_K_IO_ADD_CMP_0_1, val);
+		outb(base_addr + PI_ESIC_K_IO_ADD_CMP_0_0, 0);
+		outb(base_addr + PI_ESIC_K_IO_ADD_CMP_1_1, val);
+		outb(base_addr + PI_ESIC_K_IO_ADD_CMP_1_0, 0);
+		val = PI_ESIC_K_CSR_IO_LEN - 1;
+		outb(base_addr + PI_ESIC_K_IO_ADD_MASK_0_1, (val >> 8) & 0xff);
+		outb(base_addr + PI_ESIC_K_IO_ADD_MASK_0_0, val & 0xff);
+		outb(base_addr + PI_ESIC_K_IO_ADD_MASK_1_1, (val >> 8) & 0xff);
+		outb(base_addr + PI_ESIC_K_IO_ADD_MASK_1_0, val & 0xff);
+
+		/* Enable the decoders.  */
+		val = PI_FUNCTION_CNTRL_M_IOCS1 | PI_FUNCTION_CNTRL_M_IOCS0;
+		if (dfx_use_mmio)
+			val |= PI_FUNCTION_CNTRL_M_MEMCS0;
+		outb(base_addr + PI_ESIC_K_FUNCTION_CNTRL, val);
+
+		/*
+		 * Enable access to the rest of the module
+		 * (including PDQ and packet memory).
+		 */
+		val = PI_SLOT_CNTRL_M_ENB;
+		outb(base_addr + PI_ESIC_K_SLOT_CNTRL, val);
+
+		/*
+		 * Map PDQ registers into memory or port space.  This is
+		 * done with a bit in the Burst Holdoff register.
+		 */
+		val = inb(base_addr + PI_DEFEA_K_BURST_HOLDOFF);
+		if (dfx_use_mmio)
+			val |= PI_BURST_HOLDOFF_V_MEM_MAP;
+		else
+			val &= ~PI_BURST_HOLDOFF_V_MEM_MAP;
+		outb(base_addr + PI_DEFEA_K_BURST_HOLDOFF, val);
+
+		/* Enable interrupts at EISA bus interface chip (ESIC) */
+		val = inb(base_addr + PI_ESIC_K_IO_CONFIG_STAT_0);
+		val |= PI_CONFIG_STAT_0_M_INT_ENB;
+		outb(base_addr + PI_ESIC_K_IO_CONFIG_STAT_0, val);
+	}
+	if (dfx_bus_pci) {
+		struct pci_dev *pdev = to_pci_dev(bdev);
+
+		/* Get the interrupt level from the PCI Configuration Table */
+
+		dev->irq = pdev->irq;
+
+		/* Check Latency Timer and set if less than minimal */
+
+		pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &val);
+		if (val < PFI_K_LAT_TIMER_MIN) {
+			val = PFI_K_LAT_TIMER_DEF;
+			pci_write_config_byte(pdev, PCI_LATENCY_TIMER, val);
+		}
+
+		/* Enable interrupts at PCI bus interface chip (PFI) */
+		val = PFI_MODE_M_PDQ_INT_ENB | PFI_MODE_M_DMA_ENB;
+		dfx_port_write_long(bp, PFI_K_REG_MODE_CTRL, val);
+	}
+}
+
+/*
+ * ==================
+ * = dfx_bus_uninit =
+ * ==================
+ *
+ * Overview:
+ *   Uninitializes the bus-specific controller logic.
+ *
+ * Returns:
+ *   None
+ *
+ * Arguments:
+ *   dev - pointer to device information
+ *
+ * Functional Description:
+ *   Perform bus-specific logic uninitialization.
+ *
+ * Return Codes:
+ *   None
+ *
+ * Assumptions:
+ *   bp->base has already been set with the proper
+ *	 base I/O address for this device.
+ *
+ * Side Effects:
+ *   Interrupts are disabled at the adapter bus-specific logic.
+ */
+
+static void __devexit dfx_bus_uninit(struct net_device *dev)
+{
+	DFX_board_t *bp = netdev_priv(dev);
+	struct device *bdev = bp->bus_dev;
+	int dfx_bus_pci = DFX_BUS_PCI(bdev);
+	int dfx_bus_eisa = DFX_BUS_EISA(bdev);
+	u8 val;
+
+	DBG_printk("In dfx_bus_uninit...\n");
+
+	/* Uninitialize adapter based on bus type */
+
+	if (dfx_bus_eisa) {
+		unsigned long base_addr = to_eisa_device(bdev)->base_addr;
+
+		/* Disable interrupts at EISA bus interface chip (ESIC) */
+		val = inb(base_addr + PI_ESIC_K_IO_CONFIG_STAT_0);
+		val &= ~PI_CONFIG_STAT_0_M_INT_ENB;
+		outb(base_addr + PI_ESIC_K_IO_CONFIG_STAT_0, val);
+	}
+	if (dfx_bus_pci) {
+		/* Disable interrupts at PCI bus interface chip (PFI) */
+		dfx_port_write_long(bp, PFI_K_REG_MODE_CTRL, 0);
+	}
+}
+
+
+/*
+ * ========================
+ * = dfx_bus_config_check =
+ * ========================
+ *
+ * Overview:
+ *   Checks the configuration (burst size, full-duplex, etc.)  If any parameters
+ *   are illegal, then this routine will set new defaults.
+ *
+ * Returns:
+ *   None
+ *
+ * Arguments:
+ *   bp - pointer to board information
+ *
+ * Functional Description:
+ *   For Revision 1 FDDI EISA, Revision 2 or later FDDI EISA with rev E or later
+ *   PDQ, and all FDDI PCI controllers, all values are legal.
+ *
+ * Return Codes:
+ *   None
+ *
+ * Assumptions:
+ *   dfx_adap_init has NOT been called yet so burst size and other items have
+ *   not been set.
+ *
+ * Side Effects:
+ *   None
+ */
+
+static void __devinit dfx_bus_config_check(DFX_board_t *bp)
+{
+	struct device __maybe_unused *bdev = bp->bus_dev;
+	int dfx_bus_eisa = DFX_BUS_EISA(bdev);
+	int	status;				/* return code from adapter port control call */
+	u32	host_data;			/* LW data returned from port control call */
+
+	DBG_printk("In dfx_bus_config_check...\n");
+
+	/* Configuration check only valid for EISA adapter */
+
+	if (dfx_bus_eisa) {
+		/*
+		 * First check if revision 2 EISA controller.  Rev. 1 cards used
+		 * PDQ revision B, so no workaround needed in this case.  Rev. 3
+		 * cards used PDQ revision E, so no workaround needed in this
+		 * case, either.  Only Rev. 2 cards used either Rev. D or E
+		 * chips, so we must verify the chip revision on Rev. 2 cards.
+		 */
+		if (to_eisa_device(bdev)->id.driver_data == DEFEA_PROD_ID_2) {
+			/*
+			 * Revision 2 FDDI EISA controller found,
+			 * so let's check PDQ revision of adapter.
+			 */
+			status = dfx_hw_port_ctrl_req(bp,
+											PI_PCTRL_M_SUB_CMD,
+											PI_SUB_CMD_K_PDQ_REV_GET,
+											0,
+											&host_data);
+			if ((status != DFX_K_SUCCESS) || (host_data == 2))
+				{
+				/*
+				 * Either we couldn't determine the PDQ revision, or
+				 * we determined that it is at revision D.  In either case,
+				 * we need to implement the workaround.
+				 */
+
+				/* Ensure that the burst size is set to 8 longwords or less */
+
+				switch (bp->burst_size)
+					{
+					case PI_PDATA_B_DMA_BURST_SIZE_32:
+					case PI_PDATA_B_DMA_BURST_SIZE_16:
+						bp->burst_size = PI_PDATA_B_DMA_BURST_SIZE_8;
+						break;
+
+					default:
+						break;
+					}
+
+				/* Ensure that full-duplex mode is not enabled */
+
+				bp->full_duplex_enb = PI_SNMP_K_FALSE;
+				}
+			}
+		}
+	}
+
+
+/*
+ * ===================
+ * = dfx_driver_init =
+ * ===================
+ *
+ * Overview:
+ *   Initializes remaining adapter board structure information
+ *   and makes sure adapter is in a safe state prior to dfx_open().
+ *
+ * Returns:
+ *   Condition code
+ *
+ * Arguments:
+ *   dev - pointer to device information
+ *   print_name - printable device name
+ *
+ * Functional Description:
+ *   This function allocates additional resources such as the host memory
+ *   blocks needed by the adapter (eg. descriptor and consumer blocks).
+ *	 Remaining bus initialization steps are also completed.  The adapter
+ *   is also reset so that it is in the DMA_UNAVAILABLE state.  The OS
+ *   must call dfx_open() to open the adapter and bring it on-line.
+ *
+ * Return Codes:
+ *   DFX_K_SUCCESS	- initialization succeeded
+ *   DFX_K_FAILURE	- initialization failed - could not allocate memory
+ *						or read adapter MAC address
+ *
+ * Assumptions:
+ *   Memory allocated from pci_alloc_consistent() call is physically
+ *   contiguous, locked memory.
+ *
+ * Side Effects:
+ *   Adapter is reset and should be in DMA_UNAVAILABLE state before
+ *   returning from this routine.
+ */
+
+static int __devinit dfx_driver_init(struct net_device *dev,
+				     const char *print_name,
+				     resource_size_t bar_start)
+{
+	DFX_board_t *bp = netdev_priv(dev);
+	struct device *bdev = bp->bus_dev;
+	int dfx_bus_pci = DFX_BUS_PCI(bdev);
+	int dfx_bus_eisa = DFX_BUS_EISA(bdev);
+	int dfx_bus_tc = DFX_BUS_TC(bdev);
+	int dfx_use_mmio = DFX_MMIO || dfx_bus_tc;
+	int alloc_size;			/* total buffer size needed */
+	char *top_v, *curr_v;		/* virtual addrs into memory block */
+	dma_addr_t top_p, curr_p;	/* physical addrs into memory block */
+	u32 data;			/* host data register value */
+	__le32 le32;
+	char *board_name = NULL;
+
+	DBG_printk("In dfx_driver_init...\n");
+
+	/* Initialize bus-specific hardware registers */
+
+	dfx_bus_init(dev);
+
+	/*
+	 * Initialize default values for configurable parameters
+	 *
+	 * Note: All of these parameters are ones that a user may
+	 *       want to customize.  It'd be nice to break these
+	 *		 out into Space.c or someplace else that's more
+	 *		 accessible/understandable than this file.
+	 */
+
+	bp->full_duplex_enb		= PI_SNMP_K_FALSE;
+	bp->req_ttrt			= 8 * 12500;		/* 8ms in 80 nanosec units */
+	bp->burst_size			= PI_PDATA_B_DMA_BURST_SIZE_DEF;
+	bp->rcv_bufs_to_post	= RCV_BUFS_DEF;
+
+	/*
+	 * Ensure that HW configuration is OK
+	 *
+	 * Note: Depending on the hardware revision, we may need to modify
+	 *       some of the configurable parameters to workaround hardware
+	 *       limitations.  We'll perform this configuration check AFTER
+	 *       setting the parameters to their default values.
+	 */
+
+	dfx_bus_config_check(bp);
+
+	/* Disable PDQ interrupts first */
+
+	dfx_port_write_long(bp, PI_PDQ_K_REG_HOST_INT_ENB, PI_HOST_INT_K_DISABLE_ALL_INTS);
+
+	/* Place adapter in DMA_UNAVAILABLE state by resetting adapter */
+
+	(void) dfx_hw_dma_uninit(bp, PI_PDATA_A_RESET_M_SKIP_ST);
+
+	/*  Read the factory MAC address from the adapter then save it */
+
+	if (dfx_hw_port_ctrl_req(bp, PI_PCTRL_M_MLA, PI_PDATA_A_MLA_K_LO, 0,
+				 &data) != DFX_K_SUCCESS) {
+		printk("%s: Could not read adapter factory MAC address!\n",
+		       print_name);
+		return DFX_K_FAILURE;
+	}
+	le32 = cpu_to_le32(data);
+	memcpy(&bp->factory_mac_addr[0], &le32, sizeof(u32));
+
+	if (dfx_hw_port_ctrl_req(bp, PI_PCTRL_M_MLA, PI_PDATA_A_MLA_K_HI, 0,
+				 &data) != DFX_K_SUCCESS) {
+		printk("%s: Could not read adapter factory MAC address!\n",
+		       print_name);
+		return DFX_K_FAILURE;
+	}
+	le32 = cpu_to_le32(data);
+	memcpy(&bp->factory_mac_addr[4], &le32, sizeof(u16));
+
+	/*
+	 * Set current address to factory address
+	 *
+	 * Note: Node address override support is handled through
+	 *       dfx_ctl_set_mac_address.
+	 */
+
+	memcpy(dev->dev_addr, bp->factory_mac_addr, FDDI_K_ALEN);
+	if (dfx_bus_tc)
+		board_name = "DEFTA";
+	if (dfx_bus_eisa)
+		board_name = "DEFEA";
+	if (dfx_bus_pci)
+		board_name = "DEFPA";
+	pr_info("%s: %s at %saddr = 0x%llx, IRQ = %d, Hardware addr = %pMF\n",
+		print_name, board_name, dfx_use_mmio ? "" : "I/O ",
+		(long long)bar_start, dev->irq, dev->dev_addr);
+
+	/*
+	 * Get memory for descriptor block, consumer block, and other buffers
+	 * that need to be DMA read or written to by the adapter.
+	 */
+
+	alloc_size = sizeof(PI_DESCR_BLOCK) +
+					PI_CMD_REQ_K_SIZE_MAX +
+					PI_CMD_RSP_K_SIZE_MAX +
+#ifndef DYNAMIC_BUFFERS
+					(bp->rcv_bufs_to_post * PI_RCV_DATA_K_SIZE_MAX) +
+#endif
+					sizeof(PI_CONSUMER_BLOCK) +
+					(PI_ALIGN_K_DESC_BLK - 1);
+	bp->kmalloced = top_v = dma_alloc_coherent(bp->bus_dev, alloc_size,
+						   &bp->kmalloced_dma,
+						   GFP_ATOMIC);
+	if (top_v == NULL) {
+		printk("%s: Could not allocate memory for host buffers "
+		       "and structures!\n", print_name);
+		return DFX_K_FAILURE;
+	}
+	memset(top_v, 0, alloc_size);	/* zero out memory before continuing */
+	top_p = bp->kmalloced_dma;	/* get physical address of buffer */
+
+	/*
+	 *  To guarantee the 8K alignment required for the descriptor block, 8K - 1
+	 *  plus the amount of memory needed was allocated.  The physical address
+	 *	is now 8K aligned.  By carving up the memory in a specific order,
+	 *  we'll guarantee the alignment requirements for all other structures.
+	 *
+	 *  Note: If the assumptions change regarding the non-paged, non-cached,
+	 *		  physically contiguous nature of the memory block or the address
+	 *		  alignments, then we'll need to implement a different algorithm
+	 *		  for allocating the needed memory.
+	 */
+
+	curr_p = ALIGN(top_p, PI_ALIGN_K_DESC_BLK);
+	curr_v = top_v + (curr_p - top_p);
+
+	/* Reserve space for descriptor block */
+
+	bp->descr_block_virt = (PI_DESCR_BLOCK *) curr_v;
+	bp->descr_block_phys = curr_p;
+	curr_v += sizeof(PI_DESCR_BLOCK);
+	curr_p += sizeof(PI_DESCR_BLOCK);
+
+	/* Reserve space for command request buffer */
+
+	bp->cmd_req_virt = (PI_DMA_CMD_REQ *) curr_v;
+	bp->cmd_req_phys = curr_p;
+	curr_v += PI_CMD_REQ_K_SIZE_MAX;
+	curr_p += PI_CMD_REQ_K_SIZE_MAX;
+
+	/* Reserve space for command response buffer */
+
+	bp->cmd_rsp_virt = (PI_DMA_CMD_RSP *) curr_v;
+	bp->cmd_rsp_phys = curr_p;
+	curr_v += PI_CMD_RSP_K_SIZE_MAX;
+	curr_p += PI_CMD_RSP_K_SIZE_MAX;
+
+	/* Reserve space for the LLC host receive queue buffers */
+
+	bp->rcv_block_virt = curr_v;
+	bp->rcv_block_phys = curr_p;
+
+#ifndef DYNAMIC_BUFFERS
+	curr_v += (bp->rcv_bufs_to_post * PI_RCV_DATA_K_SIZE_MAX);
+	curr_p += (bp->rcv_bufs_to_post * PI_RCV_DATA_K_SIZE_MAX);
+#endif
+
+	/* Reserve space for the consumer block */
+
+	bp->cons_block_virt = (PI_CONSUMER_BLOCK *) curr_v;
+	bp->cons_block_phys = curr_p;
+
+	/* Display virtual and physical addresses if debug driver */
+
+	DBG_printk("%s: Descriptor block virt = %0lX, phys = %0X\n",
+		   print_name,
+		   (long)bp->descr_block_virt, bp->descr_block_phys);
+	DBG_printk("%s: Command Request buffer virt = %0lX, phys = %0X\n",
+		   print_name, (long)bp->cmd_req_virt, bp->cmd_req_phys);
+	DBG_printk("%s: Command Response buffer virt = %0lX, phys = %0X\n",
+		   print_name, (long)bp->cmd_rsp_virt, bp->cmd_rsp_phys);
+	DBG_printk("%s: Receive buffer block virt = %0lX, phys = %0X\n",
+		   print_name, (long)bp->rcv_block_virt, bp->rcv_block_phys);
+	DBG_printk("%s: Consumer block virt = %0lX, phys = %0X\n",
+		   print_name, (long)bp->cons_block_virt, bp->cons_block_phys);
+
+	return DFX_K_SUCCESS;
+}
+
+
+/*
+ * =================
+ * = dfx_adap_init =
+ * =================
+ *
+ * Overview:
+ *   Brings the adapter to the link avail/link unavailable state.
+ *
+ * Returns:
+ *   Condition code
+ *
+ * Arguments:
+ *   bp - pointer to board information
+ *   get_buffers - non-zero if buffers to be allocated
+ *
+ * Functional Description:
+ *   Issues the low-level firmware/hardware calls necessary to bring
+ *   the adapter up, or to properly reset and restore adapter during
+ *   run-time.
+ *
+ * Return Codes:
+ *   DFX_K_SUCCESS - Adapter brought up successfully
+ *   DFX_K_FAILURE - Adapter initialization failed
+ *
+ * Assumptions:
+ *   bp->reset_type should be set to a valid reset type value before
+ *   calling this routine.
+ *
+ * Side Effects:
+ *   Adapter should be in LINK_AVAILABLE or LINK_UNAVAILABLE state
+ *   upon a successful return of this routine.
+ */
+
+static int dfx_adap_init(DFX_board_t *bp, int get_buffers)
+	{
+	DBG_printk("In dfx_adap_init...\n");
+
+	/* Disable PDQ interrupts first */
+
+	dfx_port_write_long(bp, PI_PDQ_K_REG_HOST_INT_ENB, PI_HOST_INT_K_DISABLE_ALL_INTS);
+
+	/* Place adapter in DMA_UNAVAILABLE state by resetting adapter */
+
+	if (dfx_hw_dma_uninit(bp, bp->reset_type) != DFX_K_SUCCESS)
+		{
+		printk("%s: Could not uninitialize/reset adapter!\n", bp->dev->name);
+		return DFX_K_FAILURE;
+		}
+
+	/*
+	 * When the PDQ is reset, some false Type 0 interrupts may be pending,
+	 * so we'll acknowledge all Type 0 interrupts now before continuing.
+	 */
+
+	dfx_port_write_long(bp, PI_PDQ_K_REG_TYPE_0_STATUS, PI_HOST_INT_K_ACK_ALL_TYPE_0);
+
+	/*
+	 * Clear Type 1 and Type 2 registers before going to DMA_AVAILABLE state
+	 *
+	 * Note: We only need to clear host copies of these registers.  The PDQ reset
+	 *       takes care of the on-board register values.
+	 */
+
+	bp->cmd_req_reg.lword	= 0;
+	bp->cmd_rsp_reg.lword	= 0;
+	bp->rcv_xmt_reg.lword	= 0;
+
+	/* Clear consumer block before going to DMA_AVAILABLE state */
+
+	memset(bp->cons_block_virt, 0, sizeof(PI_CONSUMER_BLOCK));
+
+	/* Initialize the DMA Burst Size */
+
+	if (dfx_hw_port_ctrl_req(bp,
+							PI_PCTRL_M_SUB_CMD,
+							PI_SUB_CMD_K_BURST_SIZE_SET,
+							bp->burst_size,
+							NULL) != DFX_K_SUCCESS)
+		{
+		printk("%s: Could not set adapter burst size!\n", bp->dev->name);
+		return DFX_K_FAILURE;
+		}
+
+	/*
+	 * Set base address of Consumer Block
+	 *
+	 * Assumption: 32-bit physical address of consumer block is 64 byte
+	 *			   aligned.  That is, bits 0-5 of the address must be zero.
+	 */
+
+	if (dfx_hw_port_ctrl_req(bp,
+							PI_PCTRL_M_CONS_BLOCK,
+							bp->cons_block_phys,
+							0,
+							NULL) != DFX_K_SUCCESS)
+		{
+		printk("%s: Could not set consumer block address!\n", bp->dev->name);
+		return DFX_K_FAILURE;
+		}
+
+	/*
+	 * Set the base address of Descriptor Block and bring adapter
+	 * to DMA_AVAILABLE state.
+	 *
+	 * Note: We also set the literal and data swapping requirements
+	 *       in this command.
+	 *
+	 * Assumption: 32-bit physical address of descriptor block
+	 *       is 8Kbyte aligned.
+	 */
+	if (dfx_hw_port_ctrl_req(bp, PI_PCTRL_M_INIT,
+				 (u32)(bp->descr_block_phys |
+				       PI_PDATA_A_INIT_M_BSWAP_INIT),
+				 0, NULL) != DFX_K_SUCCESS) {
+		printk("%s: Could not set descriptor block address!\n",
+		       bp->dev->name);
+		return DFX_K_FAILURE;
+	}
+
+	/* Set transmit flush timeout value */
+
+	bp->cmd_req_virt->cmd_type = PI_CMD_K_CHARS_SET;
+	bp->cmd_req_virt->char_set.item[0].item_code	= PI_ITEM_K_FLUSH_TIME;
+	bp->cmd_req_virt->char_set.item[0].value		= 3;	/* 3 seconds */
+	bp->cmd_req_virt->char_set.item[0].item_index	= 0;
+	bp->cmd_req_virt->char_set.item[1].item_code	= PI_ITEM_K_EOL;
+	if (dfx_hw_dma_cmd_req(bp) != DFX_K_SUCCESS)
+		{
+		printk("%s: DMA command request failed!\n", bp->dev->name);
+		return DFX_K_FAILURE;
+		}
+
+	/* Set the initial values for eFDXEnable and MACTReq MIB objects */
+
+	bp->cmd_req_virt->cmd_type = PI_CMD_K_SNMP_SET;
+	bp->cmd_req_virt->snmp_set.item[0].item_code	= PI_ITEM_K_FDX_ENB_DIS;
+	bp->cmd_req_virt->snmp_set.item[0].value		= bp->full_duplex_enb;
+	bp->cmd_req_virt->snmp_set.item[0].item_index	= 0;
+	bp->cmd_req_virt->snmp_set.item[1].item_code	= PI_ITEM_K_MAC_T_REQ;
+	bp->cmd_req_virt->snmp_set.item[1].value		= bp->req_ttrt;
+	bp->cmd_req_virt->snmp_set.item[1].item_index	= 0;
+	bp->cmd_req_virt->snmp_set.item[2].item_code	= PI_ITEM_K_EOL;
+	if (dfx_hw_dma_cmd_req(bp) != DFX_K_SUCCESS)
+		{
+		printk("%s: DMA command request failed!\n", bp->dev->name);
+		return DFX_K_FAILURE;
+		}
+
+	/* Initialize adapter CAM */
+
+	if (dfx_ctl_update_cam(bp) != DFX_K_SUCCESS)
+		{
+		printk("%s: Adapter CAM update failed!\n", bp->dev->name);
+		return DFX_K_FAILURE;
+		}
+
+	/* Initialize adapter filters */
+
+	if (dfx_ctl_update_filters(bp) != DFX_K_SUCCESS)
+		{
+		printk("%s: Adapter filters update failed!\n", bp->dev->name);
+		return DFX_K_FAILURE;
+		}
+
+	/*
+	 * Remove any existing dynamic buffers (i.e. if the adapter is being
+	 * reinitialized)
+	 */
+
+	if (get_buffers)
+		dfx_rcv_flush(bp);
+
+	/* Initialize receive descriptor block and produce buffers */
+
+	if (dfx_rcv_init(bp, get_buffers))
+	        {
+		printk("%s: Receive buffer allocation failed\n", bp->dev->name);
+		if (get_buffers)
+			dfx_rcv_flush(bp);
+		return DFX_K_FAILURE;
+		}
+
+	/* Issue START command and bring adapter to LINK_(UN)AVAILABLE state */
+
+	bp->cmd_req_virt->cmd_type = PI_CMD_K_START;
+	if (dfx_hw_dma_cmd_req(bp) != DFX_K_SUCCESS)
+		{
+		printk("%s: Start command failed\n", bp->dev->name);
+		if (get_buffers)
+			dfx_rcv_flush(bp);
+		return DFX_K_FAILURE;
+		}
+
+	/* Initialization succeeded, reenable PDQ interrupts */
+
+	dfx_port_write_long(bp, PI_PDQ_K_REG_HOST_INT_ENB, PI_HOST_INT_K_ENABLE_DEF_INTS);
+	return DFX_K_SUCCESS;
+	}
+
+
+/*
+ * ============
+ * = dfx_open =
+ * ============
+ *
+ * Overview:
+ *   Opens the adapter
+ *
+ * Returns:
+ *   Condition code
+ *
+ * Arguments:
+ *   dev - pointer to device information
+ *
+ * Functional Description:
+ *   This function brings the adapter to an operational state.
+ *
+ * Return Codes:
+ *   0		 - Adapter was successfully opened
+ *   -EAGAIN - Could not register IRQ or adapter initialization failed
+ *
+ * Assumptions:
+ *   This routine should only be called for a device that was
+ *   initialized successfully.
+ *
+ * Side Effects:
+ *   Adapter should be in LINK_AVAILABLE or LINK_UNAVAILABLE state
+ *   if the open is successful.
+ */
+
+static int dfx_open(struct net_device *dev)
+{
+	DFX_board_t *bp = netdev_priv(dev);
+	int ret;
+
+	DBG_printk("In dfx_open...\n");
+
+	/* Register IRQ - support shared interrupts by passing device ptr */
+
+	ret = request_irq(dev->irq, dfx_interrupt, IRQF_SHARED, dev->name,
+			  dev);
+	if (ret) {
+		printk(KERN_ERR "%s: Requested IRQ %d is busy\n", dev->name, dev->irq);
+		return ret;
+	}
+
+	/*
+	 * Set current address to factory MAC address
+	 *
+	 * Note: We've already done this step in dfx_driver_init.
+	 *       However, it's possible that a user has set a node
+	 *		 address override, then closed and reopened the
+	 *		 adapter.  Unless we reset the device address field
+	 *		 now, we'll continue to use the existing modified
+	 *		 address.
+	 */
+
+	memcpy(dev->dev_addr, bp->factory_mac_addr, FDDI_K_ALEN);
+
+	/* Clear local unicast/multicast address tables and counts */
+
+	memset(bp->uc_table, 0, sizeof(bp->uc_table));
+	memset(bp->mc_table, 0, sizeof(bp->mc_table));
+	bp->uc_count = 0;
+	bp->mc_count = 0;
+
+	/* Disable promiscuous filter settings */
+
+	bp->ind_group_prom	= PI_FSTATE_K_BLOCK;
+	bp->group_prom		= PI_FSTATE_K_BLOCK;
+
+	spin_lock_init(&bp->lock);
+
+	/* Reset and initialize adapter */
+
+	bp->reset_type = PI_PDATA_A_RESET_M_SKIP_ST;	/* skip self-test */
+	if (dfx_adap_init(bp, 1) != DFX_K_SUCCESS)
+	{
+		printk(KERN_ERR "%s: Adapter open failed!\n", dev->name);
+		free_irq(dev->irq, dev);
+		return -EAGAIN;
+	}
+
+	/* Set device structure info */
+	netif_start_queue(dev);
+	return 0;
+}
+
+
+/*
+ * =============
+ * = dfx_close =
+ * =============
+ *
+ * Overview:
+ *   Closes the device/module.
+ *
+ * Returns:
+ *   Condition code
+ *
+ * Arguments:
+ *   dev - pointer to device information
+ *
+ * Functional Description:
+ *   This routine closes the adapter and brings it to a safe state.
+ *   The interrupt service routine is deregistered with the OS.
+ *   The adapter can be opened again with another call to dfx_open().
+ *
+ * Return Codes:
+ *   Always return 0.
+ *
+ * Assumptions:
+ *   No further requests for this adapter are made after this routine is
+ *   called.  dfx_open() can be called to reset and reinitialize the
+ *   adapter.
+ *
+ * Side Effects:
+ *   Adapter should be in DMA_UNAVAILABLE state upon completion of this
+ *   routine.
+ */
+
+static int dfx_close(struct net_device *dev)
+{
+	DFX_board_t *bp = netdev_priv(dev);
+
+	DBG_printk("In dfx_close...\n");
+
+	/* Disable PDQ interrupts first */
+
+	dfx_port_write_long(bp, PI_PDQ_K_REG_HOST_INT_ENB, PI_HOST_INT_K_DISABLE_ALL_INTS);
+
+	/* Place adapter in DMA_UNAVAILABLE state by resetting adapter */
+
+	(void) dfx_hw_dma_uninit(bp, PI_PDATA_A_RESET_M_SKIP_ST);
+
+	/*
+	 * Flush any pending transmit buffers
+	 *
+	 * Note: It's important that we flush the transmit buffers
+	 *		 BEFORE we clear our copy of the Type 2 register.
+	 *		 Otherwise, we'll have no idea how many buffers
+	 *		 we need to free.
+	 */
+
+	dfx_xmt_flush(bp);
+
+	/*
+	 * Clear Type 1 and Type 2 registers after adapter reset
+	 *
+	 * Note: Even though we're closing the adapter, it's
+	 *       possible that an interrupt will occur after
+	 *		 dfx_close is called.  Without some assurance to
+	 *		 the contrary we want to make sure that we don't
+	 *		 process receive and transmit LLC frames and update
+	 *		 the Type 2 register with bad information.
+	 */
+
+	bp->cmd_req_reg.lword	= 0;
+	bp->cmd_rsp_reg.lword	= 0;
+	bp->rcv_xmt_reg.lword	= 0;
+
+	/* Clear consumer block for the same reason given above */
+
+	memset(bp->cons_block_virt, 0, sizeof(PI_CONSUMER_BLOCK));
+
+	/* Release all dynamically allocate skb in the receive ring. */
+
+	dfx_rcv_flush(bp);
+
+	/* Clear device structure flags */
+
+	netif_stop_queue(dev);
+
+	/* Deregister (free) IRQ */
+
+	free_irq(dev->irq, dev);
+
+	return 0;
+}
+
+
+/*
+ * ======================
+ * = dfx_int_pr_halt_id =
+ * ======================
+ *
+ * Overview:
+ *   Displays halt id's in string form.
+ *
+ * Returns:
+ *   None
+ *
+ * Arguments:
+ *   bp - pointer to board information
+ *
+ * Functional Description:
+ *   Determine current halt id and display appropriate string.
+ *
+ * Return Codes:
+ *   None
+ *
+ * Assumptions:
+ *   None
+ *
+ * Side Effects:
+ *   None
+ */
+
+static void dfx_int_pr_halt_id(DFX_board_t	*bp)
+	{
+	PI_UINT32	port_status;			/* PDQ port status register value */
+	PI_UINT32	halt_id;				/* PDQ port status halt ID */
+
+	/* Read the latest port status */
+
+	dfx_port_read_long(bp, PI_PDQ_K_REG_PORT_STATUS, &port_status);
+
+	/* Display halt state transition information */
+
+	halt_id = (port_status & PI_PSTATUS_M_HALT_ID) >> PI_PSTATUS_V_HALT_ID;
+	switch (halt_id)
+		{
+		case PI_HALT_ID_K_SELFTEST_TIMEOUT:
+			printk("%s: Halt ID: Selftest Timeout\n", bp->dev->name);
+			break;
+
+		case PI_HALT_ID_K_PARITY_ERROR:
+			printk("%s: Halt ID: Host Bus Parity Error\n", bp->dev->name);
+			break;
+
+		case PI_HALT_ID_K_HOST_DIR_HALT:
+			printk("%s: Halt ID: Host-Directed Halt\n", bp->dev->name);
+			break;
+
+		case PI_HALT_ID_K_SW_FAULT:
+			printk("%s: Halt ID: Adapter Software Fault\n", bp->dev->name);
+			break;
+
+		case PI_HALT_ID_K_HW_FAULT:
+			printk("%s: Halt ID: Adapter Hardware Fault\n", bp->dev->name);
+			break;
+
+		case PI_HALT_ID_K_PC_TRACE:
+			printk("%s: Halt ID: FDDI Network PC Trace Path Test\n", bp->dev->name);
+			break;
+
+		case PI_HALT_ID_K_DMA_ERROR:
+			printk("%s: Halt ID: Adapter DMA Error\n", bp->dev->name);
+			break;
+
+		case PI_HALT_ID_K_IMAGE_CRC_ERROR:
+			printk("%s: Halt ID: Firmware Image CRC Error\n", bp->dev->name);
+			break;
+
+		case PI_HALT_ID_K_BUS_EXCEPTION:
+			printk("%s: Halt ID: 68000 Bus Exception\n", bp->dev->name);
+			break;
+
+		default:
+			printk("%s: Halt ID: Unknown (code = %X)\n", bp->dev->name, halt_id);
+			break;
+		}
+	}
+
+
+/*
+ * ==========================
+ * = dfx_int_type_0_process =
+ * ==========================
+ *
+ * Overview:
+ *   Processes Type 0 interrupts.
+ *
+ * Returns:
+ *   None
+ *
+ * Arguments:
+ *   bp - pointer to board information
+ *
+ * Functional Description:
+ *   Processes all enabled Type 0 interrupts.  If the reason for the interrupt
+ *   is a serious fault on the adapter, then an error message is displayed
+ *   and the adapter is reset.
+ *
+ *   One tricky potential timing window is the rapid succession of "link avail"
+ *   "link unavail" state change interrupts.  The acknowledgement of the Type 0
+ *   interrupt must be done before reading the state from the Port Status
+ *   register.  This is true because a state change could occur after reading
+ *   the data, but before acknowledging the interrupt.  If this state change
+ *   does happen, it would be lost because the driver is using the old state,
+ *   and it will never know about the new state because it subsequently
+ *   acknowledges the state change interrupt.
+ *
+ *          INCORRECT                                      CORRECT
+ *      read type 0 int reasons                   read type 0 int reasons
+ *      read adapter state                        ack type 0 interrupts
+ *      ack type 0 interrupts                     read adapter state
+ *      ... process interrupt ...                 ... process interrupt ...
+ *
+ * Return Codes:
+ *   None
+ *
+ * Assumptions:
+ *   None
+ *
+ * Side Effects:
+ *   An adapter reset may occur if the adapter has any Type 0 error interrupts
+ *   or if the port status indicates that the adapter is halted.  The driver
+ *   is responsible for reinitializing the adapter with the current CAM
+ *   contents and adapter filter settings.
+ */
+
+static void dfx_int_type_0_process(DFX_board_t	*bp)
+
+	{
+	PI_UINT32	type_0_status;		/* Host Interrupt Type 0 register */
+	PI_UINT32	state;				/* current adap state (from port status) */
+
+	/*
+	 * Read host interrupt Type 0 register to determine which Type 0
+	 * interrupts are pending.  Immediately write it back out to clear
+	 * those interrupts.
+	 */
+
+	dfx_port_read_long(bp, PI_PDQ_K_REG_TYPE_0_STATUS, &type_0_status);
+	dfx_port_write_long(bp, PI_PDQ_K_REG_TYPE_0_STATUS, type_0_status);
+
+	/* Check for Type 0 error interrupts */
+
+	if (type_0_status & (PI_TYPE_0_STAT_M_NXM |
+							PI_TYPE_0_STAT_M_PM_PAR_ERR |
+							PI_TYPE_0_STAT_M_BUS_PAR_ERR))
+		{
+		/* Check for Non-Existent Memory error */
+
+		if (type_0_status & PI_TYPE_0_STAT_M_NXM)
+			printk("%s: Non-Existent Memory Access Error\n", bp->dev->name);
+
+		/* Check for Packet Memory Parity error */
+
+		if (type_0_status & PI_TYPE_0_STAT_M_PM_PAR_ERR)
+			printk("%s: Packet Memory Parity Error\n", bp->dev->name);
+
+		/* Check for Host Bus Parity error */
+
+		if (type_0_status & PI_TYPE_0_STAT_M_BUS_PAR_ERR)
+			printk("%s: Host Bus Parity Error\n", bp->dev->name);
+
+		/* Reset adapter and bring it back on-line */
+
+		bp->link_available = PI_K_FALSE;	/* link is no longer available */
+		bp->reset_type = 0;					/* rerun on-board diagnostics */
+		printk("%s: Resetting adapter...\n", bp->dev->name);
+		if (dfx_adap_init(bp, 0) != DFX_K_SUCCESS)
+			{
+			printk("%s: Adapter reset failed!  Disabling adapter interrupts.\n", bp->dev->name);
+			dfx_port_write_long(bp, PI_PDQ_K_REG_HOST_INT_ENB, PI_HOST_INT_K_DISABLE_ALL_INTS);
+			return;
+			}
+		printk("%s: Adapter reset successful!\n", bp->dev->name);
+		return;
+		}
+
+	/* Check for transmit flush interrupt */
+
+	if (type_0_status & PI_TYPE_0_STAT_M_XMT_FLUSH)
+		{
+		/* Flush any pending xmt's and acknowledge the flush interrupt */
+
+		bp->link_available = PI_K_FALSE;		/* link is no longer available */
+		dfx_xmt_flush(bp);						/* flush any outstanding packets */
+		(void) dfx_hw_port_ctrl_req(bp,
+									PI_PCTRL_M_XMT_DATA_FLUSH_DONE,
+									0,
+									0,
+									NULL);
+		}
+
+	/* Check for adapter state change */
+
+	if (type_0_status & PI_TYPE_0_STAT_M_STATE_CHANGE)
+		{
+		/* Get latest adapter state */
+
+		state = dfx_hw_adap_state_rd(bp);	/* get adapter state */
+		if (state == PI_STATE_K_HALTED)
+			{
+			/*
+			 * Adapter has transitioned to HALTED state, try to reset
+			 * adapter to bring it back on-line.  If reset fails,
+			 * leave the adapter in the broken state.
+			 */
+
+			printk("%s: Controller has transitioned to HALTED state!\n", bp->dev->name);
+			dfx_int_pr_halt_id(bp);			/* display halt id as string */
+
+			/* Reset adapter and bring it back on-line */
+
+			bp->link_available = PI_K_FALSE;	/* link is no longer available */
+			bp->reset_type = 0;					/* rerun on-board diagnostics */
+			printk("%s: Resetting adapter...\n", bp->dev->name);
+			if (dfx_adap_init(bp, 0) != DFX_K_SUCCESS)
+				{
+				printk("%s: Adapter reset failed!  Disabling adapter interrupts.\n", bp->dev->name);
+				dfx_port_write_long(bp, PI_PDQ_K_REG_HOST_INT_ENB, PI_HOST_INT_K_DISABLE_ALL_INTS);
+				return;
+				}
+			printk("%s: Adapter reset successful!\n", bp->dev->name);
+			}
+		else if (state == PI_STATE_K_LINK_AVAIL)
+			{
+			bp->link_available = PI_K_TRUE;		/* set link available flag */
+			}
+		}
+	}
+
+
+/*
+ * ==================
+ * = dfx_int_common =
+ * ==================
+ *
+ * Overview:
+ *   Interrupt service routine (ISR)
+ *
+ * Returns:
+ *   None
+ *
+ * Arguments:
+ *   bp - pointer to board information
+ *
+ * Functional Description:
+ *   This is the ISR which processes incoming adapter interrupts.
+ *
+ * Return Codes:
+ *   None
+ *
+ * Assumptions:
+ *   This routine assumes PDQ interrupts have not been disabled.
+ *   When interrupts are disabled at the PDQ, the Port Status register
+ *   is automatically cleared.  This routine uses the Port Status
+ *   register value to determine whether a Type 0 interrupt occurred,
+ *   so it's important that adapter interrupts are not normally
+ *   enabled/disabled at the PDQ.
+ *
+ *   It's vital that this routine is NOT reentered for the
+ *   same board and that the OS is not in another section of
+ *   code (eg. dfx_xmt_queue_pkt) for the same board on a
+ *   different thread.
+ *
+ * Side Effects:
+ *   Pending interrupts are serviced.  Depending on the type of
+ *   interrupt, acknowledging and clearing the interrupt at the
+ *   PDQ involves writing a register to clear the interrupt bit
+ *   or updating completion indices.
+ */
+
+static void dfx_int_common(struct net_device *dev)
+{
+	DFX_board_t *bp = netdev_priv(dev);
+	PI_UINT32	port_status;		/* Port Status register */
+
+	/* Process xmt interrupts - frequent case, so always call this routine */
+
+	if(dfx_xmt_done(bp))				/* free consumed xmt packets */
+		netif_wake_queue(dev);
+
+	/* Process rcv interrupts - frequent case, so always call this routine */
+
+	dfx_rcv_queue_process(bp);		/* service received LLC frames */
+
+	/*
+	 * Transmit and receive producer and completion indices are updated on the
+	 * adapter by writing to the Type 2 Producer register.  Since the frequent
+	 * case is that we'll be processing either LLC transmit or receive buffers,
+	 * we'll optimize I/O writes by doing a single register write here.
+	 */
+
+	dfx_port_write_long(bp, PI_PDQ_K_REG_TYPE_2_PROD, bp->rcv_xmt_reg.lword);
+
+	/* Read PDQ Port Status register to find out which interrupts need processing */
+
+	dfx_port_read_long(bp, PI_PDQ_K_REG_PORT_STATUS, &port_status);
+
+	/* Process Type 0 interrupts (if any) - infrequent, so only call when needed */
+
+	if (port_status & PI_PSTATUS_M_TYPE_0_PENDING)
+		dfx_int_type_0_process(bp);	/* process Type 0 interrupts */
+	}
+
+
+/*
+ * =================
+ * = dfx_interrupt =
+ * =================
+ *
+ * Overview:
+ *   Interrupt processing routine
+ *
+ * Returns:
+ *   Whether a valid interrupt was seen.
+ *
+ * Arguments:
+ *   irq	- interrupt vector
+ *   dev_id	- pointer to device information
+ *
+ * Functional Description:
+ *   This routine calls the interrupt processing routine for this adapter.  It
+ *   disables and reenables adapter interrupts, as appropriate.  We can support
+ *   shared interrupts since the incoming dev_id pointer provides our device
+ *   structure context.
+ *
+ * Return Codes:
+ *   IRQ_HANDLED - an IRQ was handled.
+ *   IRQ_NONE    - no IRQ was handled.
+ *
+ * Assumptions:
+ *   The interrupt acknowledgement at the hardware level (eg. ACKing the PIC
+ *   on Intel-based systems) is done by the operating system outside this
+ *   routine.
+ *
+ *	 System interrupts are enabled through this call.
+ *
+ * Side Effects:
+ *   Interrupts are disabled, then reenabled at the adapter.
+ */
+
+static irqreturn_t dfx_interrupt(int irq, void *dev_id)
+{
+	struct net_device *dev = dev_id;
+	DFX_board_t *bp = netdev_priv(dev);
+	struct device *bdev = bp->bus_dev;
+	int dfx_bus_pci = DFX_BUS_PCI(bdev);
+	int dfx_bus_eisa = DFX_BUS_EISA(bdev);
+	int dfx_bus_tc = DFX_BUS_TC(bdev);
+
+	/* Service adapter interrupts */
+
+	if (dfx_bus_pci) {
+		u32 status;
+
+		dfx_port_read_long(bp, PFI_K_REG_STATUS, &status);
+		if (!(status & PFI_STATUS_M_PDQ_INT))
+			return IRQ_NONE;
+
+		spin_lock(&bp->lock);
+
+		/* Disable PDQ-PFI interrupts at PFI */
+		dfx_port_write_long(bp, PFI_K_REG_MODE_CTRL,
+				    PFI_MODE_M_DMA_ENB);
+
+		/* Call interrupt service routine for this adapter */
+		dfx_int_common(dev);
+
+		/* Clear PDQ interrupt status bit and reenable interrupts */
+		dfx_port_write_long(bp, PFI_K_REG_STATUS,
+				    PFI_STATUS_M_PDQ_INT);
+		dfx_port_write_long(bp, PFI_K_REG_MODE_CTRL,
+				    (PFI_MODE_M_PDQ_INT_ENB |
+				     PFI_MODE_M_DMA_ENB));
+
+		spin_unlock(&bp->lock);
+	}
+	if (dfx_bus_eisa) {
+		unsigned long base_addr = to_eisa_device(bdev)->base_addr;
+		u8 status;
+
+		status = inb(base_addr + PI_ESIC_K_IO_CONFIG_STAT_0);
+		if (!(status & PI_CONFIG_STAT_0_M_PEND))
+			return IRQ_NONE;
+
+		spin_lock(&bp->lock);
+
+		/* Disable interrupts at the ESIC */
+		status &= ~PI_CONFIG_STAT_0_M_INT_ENB;
+		outb(base_addr + PI_ESIC_K_IO_CONFIG_STAT_0, status);
+
+		/* Call interrupt service routine for this adapter */
+		dfx_int_common(dev);
+
+		/* Reenable interrupts at the ESIC */
+		status = inb(base_addr + PI_ESIC_K_IO_CONFIG_STAT_0);
+		status |= PI_CONFIG_STAT_0_M_INT_ENB;
+		outb(base_addr + PI_ESIC_K_IO_CONFIG_STAT_0, status);
+
+		spin_unlock(&bp->lock);
+	}
+	if (dfx_bus_tc) {
+		u32 status;
+
+		dfx_port_read_long(bp, PI_PDQ_K_REG_PORT_STATUS, &status);
+		if (!(status & (PI_PSTATUS_M_RCV_DATA_PENDING |
+				PI_PSTATUS_M_XMT_DATA_PENDING |
+				PI_PSTATUS_M_SMT_HOST_PENDING |
+				PI_PSTATUS_M_UNSOL_PENDING |
+				PI_PSTATUS_M_CMD_RSP_PENDING |
+				PI_PSTATUS_M_CMD_REQ_PENDING |
+				PI_PSTATUS_M_TYPE_0_PENDING)))
+			return IRQ_NONE;
+
+		spin_lock(&bp->lock);
+
+		/* Call interrupt service routine for this adapter */
+		dfx_int_common(dev);
+
+		spin_unlock(&bp->lock);
+	}
+
+	return IRQ_HANDLED;
+}
+
+
+/*
+ * =====================
+ * = dfx_ctl_get_stats =
+ * =====================
+ *
+ * Overview:
+ *   Get statistics for FDDI adapter
+ *
+ * Returns:
+ *   Pointer to FDDI statistics structure
+ *
+ * Arguments:
+ *   dev - pointer to device information
+ *
+ * Functional Description:
+ *   Gets current MIB objects from adapter, then
+ *   returns FDDI statistics structure as defined
+ *   in if_fddi.h.
+ *
+ *   Note: Since the FDDI statistics structure is
+ *   still new and the device structure doesn't
+ *   have an FDDI-specific get statistics handler,
+ *   we'll return the FDDI statistics structure as
+ *   a pointer to an Ethernet statistics structure.
+ *   That way, at least the first part of the statistics
+ *   structure can be decoded properly, and it allows
+ *   "smart" applications to perform a second cast to
+ *   decode the FDDI-specific statistics.
+ *
+ *   We'll have to pay attention to this routine as the
+ *   device structure becomes more mature and LAN media
+ *   independent.
+ *
+ * Return Codes:
+ *   None
+ *
+ * Assumptions:
+ *   None
+ *
+ * Side Effects:
+ *   None
+ */
+
+static struct net_device_stats *dfx_ctl_get_stats(struct net_device *dev)
+	{
+	DFX_board_t *bp = netdev_priv(dev);
+
+	/* Fill the bp->stats structure with driver-maintained counters */
+
+	bp->stats.gen.rx_packets = bp->rcv_total_frames;
+	bp->stats.gen.tx_packets = bp->xmt_total_frames;
+	bp->stats.gen.rx_bytes   = bp->rcv_total_bytes;
+	bp->stats.gen.tx_bytes   = bp->xmt_total_bytes;
+	bp->stats.gen.rx_errors  = bp->rcv_crc_errors +
+				   bp->rcv_frame_status_errors +
+				   bp->rcv_length_errors;
+	bp->stats.gen.tx_errors  = bp->xmt_length_errors;
+	bp->stats.gen.rx_dropped = bp->rcv_discards;
+	bp->stats.gen.tx_dropped = bp->xmt_discards;
+	bp->stats.gen.multicast  = bp->rcv_multicast_frames;
+	bp->stats.gen.collisions = 0;		/* always zero (0) for FDDI */
+
+	/* Get FDDI SMT MIB objects */
+
+	bp->cmd_req_virt->cmd_type = PI_CMD_K_SMT_MIB_GET;
+	if (dfx_hw_dma_cmd_req(bp) != DFX_K_SUCCESS)
+		return (struct net_device_stats *)&bp->stats;
+
+	/* Fill the bp->stats structure with the SMT MIB object values */
+
+	memcpy(bp->stats.smt_station_id, &bp->cmd_rsp_virt->smt_mib_get.smt_station_id, sizeof(bp->cmd_rsp_virt->smt_mib_get.smt_station_id));
+	bp->stats.smt_op_version_id					= bp->cmd_rsp_virt->smt_mib_get.smt_op_version_id;
+	bp->stats.smt_hi_version_id					= bp->cmd_rsp_virt->smt_mib_get.smt_hi_version_id;
+	bp->stats.smt_lo_version_id					= bp->cmd_rsp_virt->smt_mib_get.smt_lo_version_id;
+	memcpy(bp->stats.smt_user_data, &bp->cmd_rsp_virt->smt_mib_get.smt_user_data, sizeof(bp->cmd_rsp_virt->smt_mib_get.smt_user_data));
+	bp->stats.smt_mib_version_id				= bp->cmd_rsp_virt->smt_mib_get.smt_mib_version_id;
+	bp->stats.smt_mac_cts						= bp->cmd_rsp_virt->smt_mib_get.smt_mac_ct;
+	bp->stats.smt_non_master_cts				= bp->cmd_rsp_virt->smt_mib_get.smt_non_master_ct;
+	bp->stats.smt_master_cts					= bp->cmd_rsp_virt->smt_mib_get.smt_master_ct;
+	bp->stats.smt_available_paths				= bp->cmd_rsp_virt->smt_mib_get.smt_available_paths;
+	bp->stats.smt_config_capabilities			= bp->cmd_rsp_virt->smt_mib_get.smt_config_capabilities;
+	bp->stats.smt_config_policy					= bp->cmd_rsp_virt->smt_mib_get.smt_config_policy;
+	bp->stats.smt_connection_policy				= bp->cmd_rsp_virt->smt_mib_get.smt_connection_policy;
+	bp->stats.smt_t_notify						= bp->cmd_rsp_virt->smt_mib_get.smt_t_notify;
+	bp->stats.smt_stat_rpt_policy				= bp->cmd_rsp_virt->smt_mib_get.smt_stat_rpt_policy;
+	bp->stats.smt_trace_max_expiration			= bp->cmd_rsp_virt->smt_mib_get.smt_trace_max_expiration;
+	bp->stats.smt_bypass_present				= bp->cmd_rsp_virt->smt_mib_get.smt_bypass_present;
+	bp->stats.smt_ecm_state						= bp->cmd_rsp_virt->smt_mib_get.smt_ecm_state;
+	bp->stats.smt_cf_state						= bp->cmd_rsp_virt->smt_mib_get.smt_cf_state;
+	bp->stats.smt_remote_disconnect_flag		= bp->cmd_rsp_virt->smt_mib_get.smt_remote_disconnect_flag;
+	bp->stats.smt_station_status				= bp->cmd_rsp_virt->smt_mib_get.smt_station_status;
+	bp->stats.smt_peer_wrap_flag				= bp->cmd_rsp_virt->smt_mib_get.smt_peer_wrap_flag;
+	bp->stats.smt_time_stamp					= bp->cmd_rsp_virt->smt_mib_get.smt_msg_time_stamp.ls;
+	bp->stats.smt_transition_time_stamp			= bp->cmd_rsp_virt->smt_mib_get.smt_transition_time_stamp.ls;
+	bp->stats.mac_frame_status_functions		= bp->cmd_rsp_virt->smt_mib_get.mac_frame_status_functions;
+	bp->stats.mac_t_max_capability				= bp->cmd_rsp_virt->smt_mib_get.mac_t_max_capability;
+	bp->stats.mac_tvx_capability				= bp->cmd_rsp_virt->smt_mib_get.mac_tvx_capability;
+	bp->stats.mac_available_paths				= bp->cmd_rsp_virt->smt_mib_get.mac_available_paths;
+	bp->stats.mac_current_path					= bp->cmd_rsp_virt->smt_mib_get.mac_current_path;
+	memcpy(bp->stats.mac_upstream_nbr, &bp->cmd_rsp_virt->smt_mib_get.mac_upstream_nbr, FDDI_K_ALEN);
+	memcpy(bp->stats.mac_downstream_nbr, &bp->cmd_rsp_virt->smt_mib_get.mac_downstream_nbr, FDDI_K_ALEN);
+	memcpy(bp->stats.mac_old_upstream_nbr, &bp->cmd_rsp_virt->smt_mib_get.mac_old_upstream_nbr, FDDI_K_ALEN);
+	memcpy(bp->stats.mac_old_downstream_nbr, &bp->cmd_rsp_virt->smt_mib_get.mac_old_downstream_nbr, FDDI_K_ALEN);
+	bp->stats.mac_dup_address_test				= bp->cmd_rsp_virt->smt_mib_get.mac_dup_address_test;
+	bp->stats.mac_requested_paths				= bp->cmd_rsp_virt->smt_mib_get.mac_requested_paths;
+	bp->stats.mac_downstream_port_type			= bp->cmd_rsp_virt->smt_mib_get.mac_downstream_port_type;
+	memcpy(bp->stats.mac_smt_address, &bp->cmd_rsp_virt->smt_mib_get.mac_smt_address, FDDI_K_ALEN);
+	bp->stats.mac_t_req							= bp->cmd_rsp_virt->smt_mib_get.mac_t_req;
+	bp->stats.mac_t_neg							= bp->cmd_rsp_virt->smt_mib_get.mac_t_neg;
+	bp->stats.mac_t_max							= bp->cmd_rsp_virt->smt_mib_get.mac_t_max;
+	bp->stats.mac_tvx_value						= bp->cmd_rsp_virt->smt_mib_get.mac_tvx_value;
+	bp->stats.mac_frame_error_threshold			= bp->cmd_rsp_virt->smt_mib_get.mac_frame_error_threshold;
+	bp->stats.mac_frame_error_ratio				= bp->cmd_rsp_virt->smt_mib_get.mac_frame_error_ratio;
+	bp->stats.mac_rmt_state						= bp->cmd_rsp_virt->smt_mib_get.mac_rmt_state;
+	bp->stats.mac_da_flag						= bp->cmd_rsp_virt->smt_mib_get.mac_da_flag;
+	bp->stats.mac_una_da_flag					= bp->cmd_rsp_virt->smt_mib_get.mac_unda_flag;
+	bp->stats.mac_frame_error_flag				= bp->cmd_rsp_virt->smt_mib_get.mac_frame_error_flag;
+	bp->stats.mac_ma_unitdata_available			= bp->cmd_rsp_virt->smt_mib_get.mac_ma_unitdata_available;
+	bp->stats.mac_hardware_present				= bp->cmd_rsp_virt->smt_mib_get.mac_hardware_present;
+	bp->stats.mac_ma_unitdata_enable			= bp->cmd_rsp_virt->smt_mib_get.mac_ma_unitdata_enable;
+	bp->stats.path_tvx_lower_bound				= bp->cmd_rsp_virt->smt_mib_get.path_tvx_lower_bound;
+	bp->stats.path_t_max_lower_bound			= bp->cmd_rsp_virt->smt_mib_get.path_t_max_lower_bound;
+	bp->stats.path_max_t_req					= bp->cmd_rsp_virt->smt_mib_get.path_max_t_req;
+	memcpy(bp->stats.path_configuration, &bp->cmd_rsp_virt->smt_mib_get.path_configuration, sizeof(bp->cmd_rsp_virt->smt_mib_get.path_configuration));
+	bp->stats.port_my_type[0]					= bp->cmd_rsp_virt->smt_mib_get.port_my_type[0];
+	bp->stats.port_my_type[1]					= bp->cmd_rsp_virt->smt_mib_get.port_my_type[1];
+	bp->stats.port_neighbor_type[0]				= bp->cmd_rsp_virt->smt_mib_get.port_neighbor_type[0];
+	bp->stats.port_neighbor_type[1]				= bp->cmd_rsp_virt->smt_mib_get.port_neighbor_type[1];
+	bp->stats.port_connection_policies[0]		= bp->cmd_rsp_virt->smt_mib_get.port_connection_policies[0];
+	bp->stats.port_connection_policies[1]		= bp->cmd_rsp_virt->smt_mib_get.port_connection_policies[1];
+	bp->stats.port_mac_indicated[0]				= bp->cmd_rsp_virt->smt_mib_get.port_mac_indicated[0];
+	bp->stats.port_mac_indicated[1]				= bp->cmd_rsp_virt->smt_mib_get.port_mac_indicated[1];
+	bp->stats.port_current_path[0]				= bp->cmd_rsp_virt->smt_mib_get.port_current_path[0];
+	bp->stats.port_current_path[1]				= bp->cmd_rsp_virt->smt_mib_get.port_current_path[1];
+	memcpy(&bp->stats.port_requested_paths[0*3], &bp->cmd_rsp_virt->smt_mib_get.port_requested_paths[0], 3);
+	memcpy(&bp->stats.port_requested_paths[1*3], &bp->cmd_rsp_virt->smt_mib_get.port_requested_paths[1], 3);
+	bp->stats.port_mac_placement[0]				= bp->cmd_rsp_virt->smt_mib_get.port_mac_placement[0];
+	bp->stats.port_mac_placement[1]				= bp->cmd_rsp_virt->smt_mib_get.port_mac_placement[1];
+	bp->stats.port_available_paths[0]			= bp->cmd_rsp_virt->smt_mib_get.port_available_paths[0];
+	bp->stats.port_available_paths[1]			= bp->cmd_rsp_virt->smt_mib_get.port_available_paths[1];
+	bp->stats.port_pmd_class[0]					= bp->cmd_rsp_virt->smt_mib_get.port_pmd_class[0];
+	bp->stats.port_pmd_class[1]					= bp->cmd_rsp_virt->smt_mib_get.port_pmd_class[1];
+	bp->stats.port_connection_capabilities[0]	= bp->cmd_rsp_virt->smt_mib_get.port_connection_capabilities[0];
+	bp->stats.port_connection_capabilities[1]	= bp->cmd_rsp_virt->smt_mib_get.port_connection_capabilities[1];
+	bp->stats.port_bs_flag[0]					= bp->cmd_rsp_virt->smt_mib_get.port_bs_flag[0];
+	bp->stats.port_bs_flag[1]					= bp->cmd_rsp_virt->smt_mib_get.port_bs_flag[1];
+	bp->stats.port_ler_estimate[0]				= bp->cmd_rsp_virt->smt_mib_get.port_ler_estimate[0];
+	bp->stats.port_ler_estimate[1]				= bp->cmd_rsp_virt->smt_mib_get.port_ler_estimate[1];
+	bp->stats.port_ler_cutoff[0]				= bp->cmd_rsp_virt->smt_mib_get.port_ler_cutoff[0];
+	bp->stats.port_ler_cutoff[1]				= bp->cmd_rsp_virt->smt_mib_get.port_ler_cutoff[1];
+	bp->stats.port_ler_alarm[0]					= bp->cmd_rsp_virt->smt_mib_get.port_ler_alarm[0];
+	bp->stats.port_ler_alarm[1]					= bp->cmd_rsp_virt->smt_mib_get.port_ler_alarm[1];
+	bp->stats.port_connect_state[0]				= bp->cmd_rsp_virt->smt_mib_get.port_connect_state[0];
+	bp->stats.port_connect_state[1]				= bp->cmd_rsp_virt->smt_mib_get.port_connect_state[1];
+	bp->stats.port_pcm_state[0]					= bp->cmd_rsp_virt->smt_mib_get.port_pcm_state[0];
+	bp->stats.port_pcm_state[1]					= bp->cmd_rsp_virt->smt_mib_get.port_pcm_state[1];
+	bp->stats.port_pc_withhold[0]				= bp->cmd_rsp_virt->smt_mib_get.port_pc_withhold[0];
+	bp->stats.port_pc_withhold[1]				= bp->cmd_rsp_virt->smt_mib_get.port_pc_withhold[1];
+	bp->stats.port_ler_flag[0]					= bp->cmd_rsp_virt->smt_mib_get.port_ler_flag[0];
+	bp->stats.port_ler_flag[1]					= bp->cmd_rsp_virt->smt_mib_get.port_ler_flag[1];
+	bp->stats.port_hardware_present[0]			= bp->cmd_rsp_virt->smt_mib_get.port_hardware_present[0];
+	bp->stats.port_hardware_present[1]			= bp->cmd_rsp_virt->smt_mib_get.port_hardware_present[1];
+
+	/* Get FDDI counters */
+
+	bp->cmd_req_virt->cmd_type = PI_CMD_K_CNTRS_GET;
+	if (dfx_hw_dma_cmd_req(bp) != DFX_K_SUCCESS)
+		return (struct net_device_stats *)&bp->stats;
+
+	/* Fill the bp->stats structure with the FDDI counter values */
+
+	bp->stats.mac_frame_cts				= bp->cmd_rsp_virt->cntrs_get.cntrs.frame_cnt.ls;
+	bp->stats.mac_copied_cts			= bp->cmd_rsp_virt->cntrs_get.cntrs.copied_cnt.ls;
+	bp->stats.mac_transmit_cts			= bp->cmd_rsp_virt->cntrs_get.cntrs.transmit_cnt.ls;
+	bp->stats.mac_error_cts				= bp->cmd_rsp_virt->cntrs_get.cntrs.error_cnt.ls;
+	bp->stats.mac_lost_cts				= bp->cmd_rsp_virt->cntrs_get.cntrs.lost_cnt.ls;
+	bp->stats.port_lct_fail_cts[0]		= bp->cmd_rsp_virt->cntrs_get.cntrs.lct_rejects[0].ls;
+	bp->stats.port_lct_fail_cts[1]		= bp->cmd_rsp_virt->cntrs_get.cntrs.lct_rejects[1].ls;
+	bp->stats.port_lem_reject_cts[0]	= bp->cmd_rsp_virt->cntrs_get.cntrs.lem_rejects[0].ls;
+	bp->stats.port_lem_reject_cts[1]	= bp->cmd_rsp_virt->cntrs_get.cntrs.lem_rejects[1].ls;
+	bp->stats.port_lem_cts[0]			= bp->cmd_rsp_virt->cntrs_get.cntrs.link_errors[0].ls;
+	bp->stats.port_lem_cts[1]			= bp->cmd_rsp_virt->cntrs_get.cntrs.link_errors[1].ls;
+
+	return (struct net_device_stats *)&bp->stats;
+	}
+
+
+/*
+ * ==============================
+ * = dfx_ctl_set_multicast_list =
+ * ==============================
+ *
+ * Overview:
+ *   Enable/Disable LLC frame promiscuous mode reception
+ *   on the adapter and/or update multicast address table.
+ *
+ * Returns:
+ *   None
+ *
+ * Arguments:
+ *   dev - pointer to device information
+ *
+ * Functional Description:
+ *   This routine follows a fairly simple algorithm for setting the
+ *   adapter filters and CAM:
+ *
+ *		if IFF_PROMISC flag is set
+ *			enable LLC individual/group promiscuous mode
+ *		else
+ *			disable LLC individual/group promiscuous mode
+ *			if number of incoming multicast addresses >
+ *					(CAM max size - number of unicast addresses in CAM)
+ *				enable LLC group promiscuous mode
+ *				set driver-maintained multicast address count to zero
+ *			else
+ *				disable LLC group promiscuous mode
+ *				set driver-maintained multicast address count to incoming count
+ *			update adapter CAM
+ *		update adapter filters
+ *
+ * Return Codes:
+ *   None
+ *
+ * Assumptions:
+ *   Multicast addresses are presented in canonical (LSB) format.
+ *
+ * Side Effects:
+ *   On-board adapter CAM and filters are updated.
+ */
+
+static void dfx_ctl_set_multicast_list(struct net_device *dev)
+{
+	DFX_board_t *bp = netdev_priv(dev);
+	int					i;			/* used as index in for loop */
+	struct netdev_hw_addr *ha;
+
+	/* Enable LLC frame promiscuous mode, if necessary */
+
+	if (dev->flags & IFF_PROMISC)
+		bp->ind_group_prom = PI_FSTATE_K_PASS;		/* Enable LLC ind/group prom mode */
+
+	/* Else, update multicast address table */
+
+	else
+		{
+		bp->ind_group_prom = PI_FSTATE_K_BLOCK;		/* Disable LLC ind/group prom mode */
+		/*
+		 * Check whether incoming multicast address count exceeds table size
+		 *
+		 * Note: The adapters utilize an on-board 64 entry CAM for
+		 *       supporting perfect filtering of multicast packets
+		 *		 and bridge functions when adding unicast addresses.
+		 *		 There is no hash function available.  To support
+		 *		 additional multicast addresses, the all multicast
+		 *		 filter (LLC group promiscuous mode) must be enabled.
+		 *
+		 *		 The firmware reserves two CAM entries for SMT-related
+		 *		 multicast addresses, which leaves 62 entries available.
+		 *		 The following code ensures that we're not being asked
+		 *		 to add more than 62 addresses to the CAM.  If we are,
+		 *		 the driver will enable the all multicast filter.
+		 *		 Should the number of multicast addresses drop below
+		 *		 the high water mark, the filter will be disabled and
+		 *		 perfect filtering will be used.
+		 */
+
+		if (netdev_mc_count(dev) > (PI_CMD_ADDR_FILTER_K_SIZE - bp->uc_count))
+			{
+			bp->group_prom	= PI_FSTATE_K_PASS;		/* Enable LLC group prom mode */
+			bp->mc_count	= 0;					/* Don't add mc addrs to CAM */
+			}
+		else
+			{
+			bp->group_prom	= PI_FSTATE_K_BLOCK;	/* Disable LLC group prom mode */
+			bp->mc_count	= netdev_mc_count(dev);		/* Add mc addrs to CAM */
+			}
+
+		/* Copy addresses to multicast address table, then update adapter CAM */
+
+		i = 0;
+		netdev_for_each_mc_addr(ha, dev)
+			memcpy(&bp->mc_table[i++ * FDDI_K_ALEN],
+			       ha->addr, FDDI_K_ALEN);
+
+		if (dfx_ctl_update_cam(bp) != DFX_K_SUCCESS)
+			{
+			DBG_printk("%s: Could not update multicast address table!\n", dev->name);
+			}
+		else
+			{
+			DBG_printk("%s: Multicast address table updated!  Added %d addresses.\n", dev->name, bp->mc_count);
+			}
+		}
+
+	/* Update adapter filters */
+
+	if (dfx_ctl_update_filters(bp) != DFX_K_SUCCESS)
+		{
+		DBG_printk("%s: Could not update adapter filters!\n", dev->name);
+		}
+	else
+		{
+		DBG_printk("%s: Adapter filters updated!\n", dev->name);
+		}
+	}
+
+
+/*
+ * ===========================
+ * = dfx_ctl_set_mac_address =
+ * ===========================
+ *
+ * Overview:
+ *   Add node address override (unicast address) to adapter
+ *   CAM and update dev_addr field in device table.
+ *
+ * Returns:
+ *   None
+ *
+ * Arguments:
+ *   dev  - pointer to device information
+ *   addr - pointer to sockaddr structure containing unicast address to add
+ *
+ * Functional Description:
+ *   The adapter supports node address overrides by adding one or more
+ *   unicast addresses to the adapter CAM.  This is similar to adding
+ *   multicast addresses.  In this routine we'll update the driver and
+ *   device structures with the new address, then update the adapter CAM
+ *   to ensure that the adapter will copy and strip frames destined and
+ *   sourced by that address.
+ *
+ * Return Codes:
+ *   Always returns zero.
+ *
+ * Assumptions:
+ *   The address pointed to by addr->sa_data is a valid unicast
+ *   address and is presented in canonical (LSB) format.
+ *
+ * Side Effects:
+ *   On-board adapter CAM is updated.  On-board adapter filters
+ *   may be updated.
+ */
+
+static int dfx_ctl_set_mac_address(struct net_device *dev, void *addr)
+	{
+	struct sockaddr	*p_sockaddr = (struct sockaddr *)addr;
+	DFX_board_t *bp = netdev_priv(dev);
+
+	/* Copy unicast address to driver-maintained structs and update count */
+
+	memcpy(dev->dev_addr, p_sockaddr->sa_data, FDDI_K_ALEN);	/* update device struct */
+	memcpy(&bp->uc_table[0], p_sockaddr->sa_data, FDDI_K_ALEN);	/* update driver struct */
+	bp->uc_count = 1;
+
+	/*
+	 * Verify we're not exceeding the CAM size by adding unicast address
+	 *
+	 * Note: It's possible that before entering this routine we've
+	 *       already filled the CAM with 62 multicast addresses.
+	 *		 Since we need to place the node address override into
+	 *		 the CAM, we have to check to see that we're not
+	 *		 exceeding the CAM size.  If we are, we have to enable
+	 *		 the LLC group (multicast) promiscuous mode filter as
+	 *		 in dfx_ctl_set_multicast_list.
+	 */
+
+	if ((bp->uc_count + bp->mc_count) > PI_CMD_ADDR_FILTER_K_SIZE)
+		{
+		bp->group_prom	= PI_FSTATE_K_PASS;		/* Enable LLC group prom mode */
+		bp->mc_count	= 0;					/* Don't add mc addrs to CAM */
+
+		/* Update adapter filters */
+
+		if (dfx_ctl_update_filters(bp) != DFX_K_SUCCESS)
+			{
+			DBG_printk("%s: Could not update adapter filters!\n", dev->name);
+			}
+		else
+			{
+			DBG_printk("%s: Adapter filters updated!\n", dev->name);
+			}
+		}
+
+	/* Update adapter CAM with new unicast address */
+
+	if (dfx_ctl_update_cam(bp) != DFX_K_SUCCESS)
+		{
+		DBG_printk("%s: Could not set new MAC address!\n", dev->name);
+		}
+	else
+		{
+		DBG_printk("%s: Adapter CAM updated with new MAC address\n", dev->name);
+		}
+	return 0;			/* always return zero */
+	}
+
+
+/*
+ * ======================
+ * = dfx_ctl_update_cam =
+ * ======================
+ *
+ * Overview:
+ *   Procedure to update adapter CAM (Content Addressable Memory)
+ *   with desired unicast and multicast address entries.
+ *
+ * Returns:
+ *   Condition code
+ *
+ * Arguments:
+ *   bp - pointer to board information
+ *
+ * Functional Description:
+ *   Updates adapter CAM with current contents of board structure
+ *   unicast and multicast address tables.  Since there are only 62
+ *   free entries in CAM, this routine ensures that the command
+ *   request buffer is not overrun.
+ *
+ * Return Codes:
+ *   DFX_K_SUCCESS - Request succeeded
+ *   DFX_K_FAILURE - Request failed
+ *
+ * Assumptions:
+ *   All addresses being added (unicast and multicast) are in canonical
+ *   order.
+ *
+ * Side Effects:
+ *   On-board adapter CAM is updated.
+ */
+
+static int dfx_ctl_update_cam(DFX_board_t *bp)
+	{
+	int			i;				/* used as index */
+	PI_LAN_ADDR	*p_addr;		/* pointer to CAM entry */
+
+	/*
+	 * Fill in command request information
+	 *
+	 * Note: Even though both the unicast and multicast address
+	 *       table entries are stored as contiguous 6 byte entries,
+	 *		 the firmware address filter set command expects each
+	 *		 entry to be two longwords (8 bytes total).  We must be
+	 *		 careful to only copy the six bytes of each unicast and
+	 *		 multicast table entry into each command entry.  This
+	 *		 is also why we must first clear the entire command
+	 *		 request buffer.
+	 */
+
+	memset(bp->cmd_req_virt, 0, PI_CMD_REQ_K_SIZE_MAX);	/* first clear buffer */
+	bp->cmd_req_virt->cmd_type = PI_CMD_K_ADDR_FILTER_SET;
+	p_addr = &bp->cmd_req_virt->addr_filter_set.entry[0];
+
+	/* Now add unicast addresses to command request buffer, if any */
+
+	for (i=0; i < (int)bp->uc_count; i++)
+		{
+		if (i < PI_CMD_ADDR_FILTER_K_SIZE)
+			{
+			memcpy(p_addr, &bp->uc_table[i*FDDI_K_ALEN], FDDI_K_ALEN);
+			p_addr++;			/* point to next command entry */
+			}
+		}
+
+	/* Now add multicast addresses to command request buffer, if any */
+
+	for (i=0; i < (int)bp->mc_count; i++)
+		{
+		if ((i + bp->uc_count) < PI_CMD_ADDR_FILTER_K_SIZE)
+			{
+			memcpy(p_addr, &bp->mc_table[i*FDDI_K_ALEN], FDDI_K_ALEN);
+			p_addr++;			/* point to next command entry */
+			}
+		}
+
+	/* Issue command to update adapter CAM, then return */
+
+	if (dfx_hw_dma_cmd_req(bp) != DFX_K_SUCCESS)
+		return DFX_K_FAILURE;
+	return DFX_K_SUCCESS;
+	}
+
+
+/*
+ * ==========================
+ * = dfx_ctl_update_filters =
+ * ==========================
+ *
+ * Overview:
+ *   Procedure to update adapter filters with desired
+ *   filter settings.
+ *
+ * Returns:
+ *   Condition code
+ *
+ * Arguments:
+ *   bp - pointer to board information
+ *
+ * Functional Description:
+ *   Enables or disables filter using current filter settings.
+ *
+ * Return Codes:
+ *   DFX_K_SUCCESS - Request succeeded.
+ *   DFX_K_FAILURE - Request failed.
+ *
+ * Assumptions:
+ *   We must always pass up packets destined to the broadcast
+ *   address (FF-FF-FF-FF-FF-FF), so we'll always keep the
+ *   broadcast filter enabled.
+ *
+ * Side Effects:
+ *   On-board adapter filters are updated.
+ */
+
+static int dfx_ctl_update_filters(DFX_board_t *bp)
+	{
+	int	i = 0;					/* used as index */
+
+	/* Fill in command request information */
+
+	bp->cmd_req_virt->cmd_type = PI_CMD_K_FILTERS_SET;
+
+	/* Initialize Broadcast filter - * ALWAYS ENABLED * */
+
+	bp->cmd_req_virt->filter_set.item[i].item_code	= PI_ITEM_K_BROADCAST;
+	bp->cmd_req_virt->filter_set.item[i++].value	= PI_FSTATE_K_PASS;
+
+	/* Initialize LLC Individual/Group Promiscuous filter */
+
+	bp->cmd_req_virt->filter_set.item[i].item_code	= PI_ITEM_K_IND_GROUP_PROM;
+	bp->cmd_req_virt->filter_set.item[i++].value	= bp->ind_group_prom;
+
+	/* Initialize LLC Group Promiscuous filter */
+
+	bp->cmd_req_virt->filter_set.item[i].item_code	= PI_ITEM_K_GROUP_PROM;
+	bp->cmd_req_virt->filter_set.item[i++].value	= bp->group_prom;
+
+	/* Terminate the item code list */
+
+	bp->cmd_req_virt->filter_set.item[i].item_code	= PI_ITEM_K_EOL;
+
+	/* Issue command to update adapter filters, then return */
+
+	if (dfx_hw_dma_cmd_req(bp) != DFX_K_SUCCESS)
+		return DFX_K_FAILURE;
+	return DFX_K_SUCCESS;
+	}
+
+
+/*
+ * ======================
+ * = dfx_hw_dma_cmd_req =
+ * ======================
+ *
+ * Overview:
+ *   Sends PDQ DMA command to adapter firmware
+ *
+ * Returns:
+ *   Condition code
+ *
+ * Arguments:
+ *   bp - pointer to board information
+ *
+ * Functional Description:
+ *   The command request and response buffers are posted to the adapter in the manner
+ *   described in the PDQ Port Specification:
+ *
+ *		1. Command Response Buffer is posted to adapter.
+ *		2. Command Request Buffer is posted to adapter.
+ *		3. Command Request consumer index is polled until it indicates that request
+ *         buffer has been DMA'd to adapter.
+ *		4. Command Response consumer index is polled until it indicates that response
+ *         buffer has been DMA'd from adapter.
+ *
+ *   This ordering ensures that a response buffer is already available for the firmware
+ *   to use once it's done processing the request buffer.
+ *
+ * Return Codes:
+ *   DFX_K_SUCCESS	  - DMA command succeeded
+ * 	 DFX_K_OUTSTATE   - Adapter is NOT in proper state
+ *   DFX_K_HW_TIMEOUT - DMA command timed out
+ *
+ * Assumptions:
+ *   Command request buffer has already been filled with desired DMA command.
+ *
+ * Side Effects:
+ *   None
+ */
+
+static int dfx_hw_dma_cmd_req(DFX_board_t *bp)
+	{
+	int status;			/* adapter status */
+	int timeout_cnt;	/* used in for loops */
+
+	/* Make sure the adapter is in a state that we can issue the DMA command in */
+
+	status = dfx_hw_adap_state_rd(bp);
+	if ((status == PI_STATE_K_RESET)		||
+		(status == PI_STATE_K_HALTED)		||
+		(status == PI_STATE_K_DMA_UNAVAIL)	||
+		(status == PI_STATE_K_UPGRADE))
+		return DFX_K_OUTSTATE;
+
+	/* Put response buffer on the command response queue */
+
+	bp->descr_block_virt->cmd_rsp[bp->cmd_rsp_reg.index.prod].long_0 = (u32) (PI_RCV_DESCR_M_SOP |
+			((PI_CMD_RSP_K_SIZE_MAX / PI_ALIGN_K_CMD_RSP_BUFF) << PI_RCV_DESCR_V_SEG_LEN));
+	bp->descr_block_virt->cmd_rsp[bp->cmd_rsp_reg.index.prod].long_1 = bp->cmd_rsp_phys;
+
+	/* Bump (and wrap) the producer index and write out to register */
+
+	bp->cmd_rsp_reg.index.prod += 1;
+	bp->cmd_rsp_reg.index.prod &= PI_CMD_RSP_K_NUM_ENTRIES-1;
+	dfx_port_write_long(bp, PI_PDQ_K_REG_CMD_RSP_PROD, bp->cmd_rsp_reg.lword);
+
+	/* Put request buffer on the command request queue */
+
+	bp->descr_block_virt->cmd_req[bp->cmd_req_reg.index.prod].long_0 = (u32) (PI_XMT_DESCR_M_SOP |
+			PI_XMT_DESCR_M_EOP | (PI_CMD_REQ_K_SIZE_MAX << PI_XMT_DESCR_V_SEG_LEN));
+	bp->descr_block_virt->cmd_req[bp->cmd_req_reg.index.prod].long_1 = bp->cmd_req_phys;
+
+	/* Bump (and wrap) the producer index and write out to register */
+
+	bp->cmd_req_reg.index.prod += 1;
+	bp->cmd_req_reg.index.prod &= PI_CMD_REQ_K_NUM_ENTRIES-1;
+	dfx_port_write_long(bp, PI_PDQ_K_REG_CMD_REQ_PROD, bp->cmd_req_reg.lword);
+
+	/*
+	 * Here we wait for the command request consumer index to be equal
+	 * to the producer, indicating that the adapter has DMAed the request.
+	 */
+
+	for (timeout_cnt = 20000; timeout_cnt > 0; timeout_cnt--)
+		{
+		if (bp->cmd_req_reg.index.prod == (u8)(bp->cons_block_virt->cmd_req))
+			break;
+		udelay(100);			/* wait for 100 microseconds */
+		}
+	if (timeout_cnt == 0)
+		return DFX_K_HW_TIMEOUT;
+
+	/* Bump (and wrap) the completion index and write out to register */
+
+	bp->cmd_req_reg.index.comp += 1;
+	bp->cmd_req_reg.index.comp &= PI_CMD_REQ_K_NUM_ENTRIES-1;
+	dfx_port_write_long(bp, PI_PDQ_K_REG_CMD_REQ_PROD, bp->cmd_req_reg.lword);
+
+	/*
+	 * Here we wait for the command response consumer index to be equal
+	 * to the producer, indicating that the adapter has DMAed the response.
+	 */
+
+	for (timeout_cnt = 20000; timeout_cnt > 0; timeout_cnt--)
+		{
+		if (bp->cmd_rsp_reg.index.prod == (u8)(bp->cons_block_virt->cmd_rsp))
+			break;
+		udelay(100);			/* wait for 100 microseconds */
+		}
+	if (timeout_cnt == 0)
+		return DFX_K_HW_TIMEOUT;
+
+	/* Bump (and wrap) the completion index and write out to register */
+
+	bp->cmd_rsp_reg.index.comp += 1;
+	bp->cmd_rsp_reg.index.comp &= PI_CMD_RSP_K_NUM_ENTRIES-1;
+	dfx_port_write_long(bp, PI_PDQ_K_REG_CMD_RSP_PROD, bp->cmd_rsp_reg.lword);
+	return DFX_K_SUCCESS;
+	}
+
+
+/*
+ * ========================
+ * = dfx_hw_port_ctrl_req =
+ * ========================
+ *
+ * Overview:
+ *   Sends PDQ port control command to adapter firmware
+ *
+ * Returns:
+ *   Host data register value in host_data if ptr is not NULL
+ *
+ * Arguments:
+ *   bp			- pointer to board information
+ *	 command	- port control command
+ *	 data_a		- port data A register value
+ *	 data_b		- port data B register value
+ *	 host_data	- ptr to host data register value
+ *
+ * Functional Description:
+ *   Send generic port control command to adapter by writing
+ *   to various PDQ port registers, then polling for completion.
+ *
+ * Return Codes:
+ *   DFX_K_SUCCESS	  - port control command succeeded
+ *   DFX_K_HW_TIMEOUT - port control command timed out
+ *
+ * Assumptions:
+ *   None
+ *
+ * Side Effects:
+ *   None
+ */
+
+static int dfx_hw_port_ctrl_req(
+	DFX_board_t	*bp,
+	PI_UINT32	command,
+	PI_UINT32	data_a,
+	PI_UINT32	data_b,
+	PI_UINT32	*host_data
+	)
+
+	{
+	PI_UINT32	port_cmd;		/* Port Control command register value */
+	int			timeout_cnt;	/* used in for loops */
+
+	/* Set Command Error bit in command longword */
+
+	port_cmd = (PI_UINT32) (command | PI_PCTRL_M_CMD_ERROR);
+
+	/* Issue port command to the adapter */
+
+	dfx_port_write_long(bp, PI_PDQ_K_REG_PORT_DATA_A, data_a);
+	dfx_port_write_long(bp, PI_PDQ_K_REG_PORT_DATA_B, data_b);
+	dfx_port_write_long(bp, PI_PDQ_K_REG_PORT_CTRL, port_cmd);
+
+	/* Now wait for command to complete */
+
+	if (command == PI_PCTRL_M_BLAST_FLASH)
+		timeout_cnt = 600000;	/* set command timeout count to 60 seconds */
+	else
+		timeout_cnt = 20000;	/* set command timeout count to 2 seconds */
+
+	for (; timeout_cnt > 0; timeout_cnt--)
+		{
+		dfx_port_read_long(bp, PI_PDQ_K_REG_PORT_CTRL, &port_cmd);
+		if (!(port_cmd & PI_PCTRL_M_CMD_ERROR))
+			break;
+		udelay(100);			/* wait for 100 microseconds */
+		}
+	if (timeout_cnt == 0)
+		return DFX_K_HW_TIMEOUT;
+
+	/*
+	 * If the address of host_data is non-zero, assume caller has supplied a
+	 * non NULL pointer, and return the contents of the HOST_DATA register in
+	 * it.
+	 */
+
+	if (host_data != NULL)
+		dfx_port_read_long(bp, PI_PDQ_K_REG_HOST_DATA, host_data);
+	return DFX_K_SUCCESS;
+	}
+
+
+/*
+ * =====================
+ * = dfx_hw_adap_reset =
+ * =====================
+ *
+ * Overview:
+ *   Resets adapter
+ *
+ * Returns:
+ *   None
+ *
+ * Arguments:
+ *   bp   - pointer to board information
+ *   type - type of reset to perform
+ *
+ * Functional Description:
+ *   Issue soft reset to adapter by writing to PDQ Port Reset
+ *   register.  Use incoming reset type to tell adapter what
+ *   kind of reset operation to perform.
+ *
+ * Return Codes:
+ *   None
+ *
+ * Assumptions:
+ *   This routine merely issues a soft reset to the adapter.
+ *   It is expected that after this routine returns, the caller
+ *   will appropriately poll the Port Status register for the
+ *   adapter to enter the proper state.
+ *
+ * Side Effects:
+ *   Internal adapter registers are cleared.
+ */
+
+static void dfx_hw_adap_reset(
+	DFX_board_t	*bp,
+	PI_UINT32	type
+	)
+
+	{
+	/* Set Reset type and assert reset */
+
+	dfx_port_write_long(bp, PI_PDQ_K_REG_PORT_DATA_A, type);	/* tell adapter type of reset */
+	dfx_port_write_long(bp, PI_PDQ_K_REG_PORT_RESET, PI_RESET_M_ASSERT_RESET);
+
+	/* Wait for at least 1 Microsecond according to the spec. We wait 20 just to be safe */
+
+	udelay(20);
+
+	/* Deassert reset */
+
+	dfx_port_write_long(bp, PI_PDQ_K_REG_PORT_RESET, 0);
+	}
+
+
+/*
+ * ========================
+ * = dfx_hw_adap_state_rd =
+ * ========================
+ *
+ * Overview:
+ *   Returns current adapter state
+ *
+ * Returns:
+ *   Adapter state per PDQ Port Specification
+ *
+ * Arguments:
+ *   bp - pointer to board information
+ *
+ * Functional Description:
+ *   Reads PDQ Port Status register and returns adapter state.
+ *
+ * Return Codes:
+ *   None
+ *
+ * Assumptions:
+ *   None
+ *
+ * Side Effects:
+ *   None
+ */
+
+static int dfx_hw_adap_state_rd(DFX_board_t *bp)
+	{
+	PI_UINT32 port_status;		/* Port Status register value */
+
+	dfx_port_read_long(bp, PI_PDQ_K_REG_PORT_STATUS, &port_status);
+	return (port_status & PI_PSTATUS_M_STATE) >> PI_PSTATUS_V_STATE;
+	}
+
+
+/*
+ * =====================
+ * = dfx_hw_dma_uninit =
+ * =====================
+ *
+ * Overview:
+ *   Brings adapter to DMA_UNAVAILABLE state
+ *
+ * Returns:
+ *   Condition code
+ *
+ * Arguments:
+ *   bp   - pointer to board information
+ *   type - type of reset to perform
+ *
+ * Functional Description:
+ *   Bring adapter to DMA_UNAVAILABLE state by performing the following:
+ *		1. Set reset type bit in Port Data A Register then reset adapter.
+ *		2. Check that adapter is in DMA_UNAVAILABLE state.
+ *
+ * Return Codes:
+ *   DFX_K_SUCCESS	  - adapter is in DMA_UNAVAILABLE state
+ *   DFX_K_HW_TIMEOUT - adapter did not reset properly
+ *
+ * Assumptions:
+ *   None
+ *
+ * Side Effects:
+ *   Internal adapter registers are cleared.
+ */
+
+static int dfx_hw_dma_uninit(DFX_board_t *bp, PI_UINT32 type)
+	{
+	int timeout_cnt;	/* used in for loops */
+
+	/* Set reset type bit and reset adapter */
+
+	dfx_hw_adap_reset(bp, type);
+
+	/* Now wait for adapter to enter DMA_UNAVAILABLE state */
+
+	for (timeout_cnt = 100000; timeout_cnt > 0; timeout_cnt--)
+		{
+		if (dfx_hw_adap_state_rd(bp) == PI_STATE_K_DMA_UNAVAIL)
+			break;
+		udelay(100);					/* wait for 100 microseconds */
+		}
+	if (timeout_cnt == 0)
+		return DFX_K_HW_TIMEOUT;
+	return DFX_K_SUCCESS;
+	}
+
+/*
+ *	Align an sk_buff to a boundary power of 2
+ *
+ */
+
+static void my_skb_align(struct sk_buff *skb, int n)
+{
+	unsigned long x = (unsigned long)skb->data;
+	unsigned long v;
+
+	v = ALIGN(x, n);	/* Where we want to be */
+
+	skb_reserve(skb, v - x);
+}
+
+
+/*
+ * ================
+ * = dfx_rcv_init =
+ * ================
+ *
+ * Overview:
+ *   Produces buffers to adapter LLC Host receive descriptor block
+ *
+ * Returns:
+ *   None
+ *
+ * Arguments:
+ *   bp - pointer to board information
+ *   get_buffers - non-zero if buffers to be allocated
+ *
+ * Functional Description:
+ *   This routine can be called during dfx_adap_init() or during an adapter
+ *	 reset.  It initializes the descriptor block and produces all allocated
+ *   LLC Host queue receive buffers.
+ *
+ * Return Codes:
+ *   Return 0 on success or -ENOMEM if buffer allocation failed (when using
+ *   dynamic buffer allocation). If the buffer allocation failed, the
+ *   already allocated buffers will not be released and the caller should do
+ *   this.
+ *
+ * Assumptions:
+ *   The PDQ has been reset and the adapter and driver maintained Type 2
+ *   register indices are cleared.
+ *
+ * Side Effects:
+ *   Receive buffers are posted to the adapter LLC queue and the adapter
+ *   is notified.
+ */
+
+static int dfx_rcv_init(DFX_board_t *bp, int get_buffers)
+	{
+	int	i, j;					/* used in for loop */
+
+	/*
+	 *  Since each receive buffer is a single fragment of same length, initialize
+	 *  first longword in each receive descriptor for entire LLC Host descriptor
+	 *  block.  Also initialize second longword in each receive descriptor with
+	 *  physical address of receive buffer.  We'll always allocate receive
+	 *  buffers in powers of 2 so that we can easily fill the 256 entry descriptor
+	 *  block and produce new receive buffers by simply updating the receive
+	 *  producer index.
+	 *
+	 * 	Assumptions:
+	 *		To support all shipping versions of PDQ, the receive buffer size
+	 *		must be mod 128 in length and the physical address must be 128 byte
+	 *		aligned.  In other words, bits 0-6 of the length and address must
+	 *		be zero for the following descriptor field entries to be correct on
+	 *		all PDQ-based boards.  We guaranteed both requirements during
+	 *		driver initialization when we allocated memory for the receive buffers.
+	 */
+
+	if (get_buffers) {
+#ifdef DYNAMIC_BUFFERS
+	for (i = 0; i < (int)(bp->rcv_bufs_to_post); i++)
+		for (j = 0; (i + j) < (int)PI_RCV_DATA_K_NUM_ENTRIES; j += bp->rcv_bufs_to_post)
+		{
+			struct sk_buff *newskb = __netdev_alloc_skb(bp->dev, NEW_SKB_SIZE, GFP_NOIO);
+			if (!newskb)
+				return -ENOMEM;
+			bp->descr_block_virt->rcv_data[i+j].long_0 = (u32) (PI_RCV_DESCR_M_SOP |
+				((PI_RCV_DATA_K_SIZE_MAX / PI_ALIGN_K_RCV_DATA_BUFF) << PI_RCV_DESCR_V_SEG_LEN));
+			/*
+			 * align to 128 bytes for compatibility with
+			 * the old EISA boards.
+			 */
+
+			my_skb_align(newskb, 128);
+			bp->descr_block_virt->rcv_data[i + j].long_1 =
+				(u32)dma_map_single(bp->bus_dev, newskb->data,
+						    NEW_SKB_SIZE,
+						    DMA_FROM_DEVICE);
+			/*
+			 * p_rcv_buff_va is only used inside the
+			 * kernel so we put the skb pointer here.
+			 */
+			bp->p_rcv_buff_va[i+j] = (char *) newskb;
+		}
+#else
+	for (i=0; i < (int)(bp->rcv_bufs_to_post); i++)
+		for (j=0; (i + j) < (int)PI_RCV_DATA_K_NUM_ENTRIES; j += bp->rcv_bufs_to_post)
+			{
+			bp->descr_block_virt->rcv_data[i+j].long_0 = (u32) (PI_RCV_DESCR_M_SOP |
+				((PI_RCV_DATA_K_SIZE_MAX / PI_ALIGN_K_RCV_DATA_BUFF) << PI_RCV_DESCR_V_SEG_LEN));
+			bp->descr_block_virt->rcv_data[i+j].long_1 = (u32) (bp->rcv_block_phys + (i * PI_RCV_DATA_K_SIZE_MAX));
+			bp->p_rcv_buff_va[i+j] = (char *) (bp->rcv_block_virt + (i * PI_RCV_DATA_K_SIZE_MAX));
+			}
+#endif
+	}
+
+	/* Update receive producer and Type 2 register */
+
+	bp->rcv_xmt_reg.index.rcv_prod = bp->rcv_bufs_to_post;
+	dfx_port_write_long(bp, PI_PDQ_K_REG_TYPE_2_PROD, bp->rcv_xmt_reg.lword);
+	return 0;
+	}
+
+
+/*
+ * =========================
+ * = dfx_rcv_queue_process =
+ * =========================
+ *
+ * Overview:
+ *   Process received LLC frames.
+ *
+ * Returns:
+ *   None
+ *
+ * Arguments:
+ *   bp - pointer to board information
+ *
+ * Functional Description:
+ *   Received LLC frames are processed until there are no more consumed frames.
+ *   Once all frames are processed, the receive buffers are returned to the
+ *   adapter.  Note that this algorithm fixes the length of time that can be spent
+ *   in this routine, because there are a fixed number of receive buffers to
+ *   process and buffers are not produced until this routine exits and returns
+ *   to the ISR.
+ *
+ * Return Codes:
+ *   None
+ *
+ * Assumptions:
+ *   None
+ *
+ * Side Effects:
+ *   None
+ */
+
+static void dfx_rcv_queue_process(
+	DFX_board_t *bp
+	)
+
+	{
+	PI_TYPE_2_CONSUMER	*p_type_2_cons;		/* ptr to rcv/xmt consumer block register */
+	char				*p_buff;			/* ptr to start of packet receive buffer (FMC descriptor) */
+	u32					descr, pkt_len;		/* FMC descriptor field and packet length */
+	struct sk_buff		*skb;				/* pointer to a sk_buff to hold incoming packet data */
+
+	/* Service all consumed LLC receive frames */
+
+	p_type_2_cons = (PI_TYPE_2_CONSUMER *)(&bp->cons_block_virt->xmt_rcv_data);
+	while (bp->rcv_xmt_reg.index.rcv_comp != p_type_2_cons->index.rcv_cons)
+		{
+		/* Process any errors */
+
+		int entry;
+
+		entry = bp->rcv_xmt_reg.index.rcv_comp;
+#ifdef DYNAMIC_BUFFERS
+		p_buff = (char *) (((struct sk_buff *)bp->p_rcv_buff_va[entry])->data);
+#else
+		p_buff = (char *) bp->p_rcv_buff_va[entry];
+#endif
+		memcpy(&descr, p_buff + RCV_BUFF_K_DESCR, sizeof(u32));
+
+		if (descr & PI_FMC_DESCR_M_RCC_FLUSH)
+			{
+			if (descr & PI_FMC_DESCR_M_RCC_CRC)
+				bp->rcv_crc_errors++;
+			else
+				bp->rcv_frame_status_errors++;
+			}
+		else
+		{
+			int rx_in_place = 0;
+
+			/* The frame was received without errors - verify packet length */
+
+			pkt_len = (u32)((descr & PI_FMC_DESCR_M_LEN) >> PI_FMC_DESCR_V_LEN);
+			pkt_len -= 4;				/* subtract 4 byte CRC */
+			if (!IN_RANGE(pkt_len, FDDI_K_LLC_ZLEN, FDDI_K_LLC_LEN))
+				bp->rcv_length_errors++;
+			else{
+#ifdef DYNAMIC_BUFFERS
+				if (pkt_len > SKBUFF_RX_COPYBREAK) {
+					struct sk_buff *newskb;
+
+					newskb = dev_alloc_skb(NEW_SKB_SIZE);
+					if (newskb){
+						rx_in_place = 1;
+
+						my_skb_align(newskb, 128);
+						skb = (struct sk_buff *)bp->p_rcv_buff_va[entry];
+						dma_unmap_single(bp->bus_dev,
+							bp->descr_block_virt->rcv_data[entry].long_1,
+							NEW_SKB_SIZE,
+							DMA_FROM_DEVICE);
+						skb_reserve(skb, RCV_BUFF_K_PADDING);
+						bp->p_rcv_buff_va[entry] = (char *)newskb;
+						bp->descr_block_virt->rcv_data[entry].long_1 =
+							(u32)dma_map_single(bp->bus_dev,
+								newskb->data,
+								NEW_SKB_SIZE,
+								DMA_FROM_DEVICE);
+					} else
+						skb = NULL;
+				} else
+#endif
+					skb = dev_alloc_skb(pkt_len+3);	/* alloc new buffer to pass up, add room for PRH */
+				if (skb == NULL)
+					{
+					printk("%s: Could not allocate receive buffer.  Dropping packet.\n", bp->dev->name);
+					bp->rcv_discards++;
+					break;
+					}
+				else {
+#ifndef DYNAMIC_BUFFERS
+					if (! rx_in_place)
+#endif
+					{
+						/* Receive buffer allocated, pass receive packet up */
+
+						skb_copy_to_linear_data(skb,
+							       p_buff + RCV_BUFF_K_PADDING,
+							       pkt_len + 3);
+					}
+
+					skb_reserve(skb,3);		/* adjust data field so that it points to FC byte */
+					skb_put(skb, pkt_len);		/* pass up packet length, NOT including CRC */
+					skb->protocol = fddi_type_trans(skb, bp->dev);
+					bp->rcv_total_bytes += skb->len;
+					netif_rx(skb);
+
+					/* Update the rcv counters */
+					bp->rcv_total_frames++;
+					if (*(p_buff + RCV_BUFF_K_DA) & 0x01)
+						bp->rcv_multicast_frames++;
+				}
+			}
+			}
+
+		/*
+		 * Advance the producer (for recycling) and advance the completion
+		 * (for servicing received frames).  Note that it is okay to
+		 * advance the producer without checking that it passes the
+		 * completion index because they are both advanced at the same
+		 * rate.
+		 */
+
+		bp->rcv_xmt_reg.index.rcv_prod += 1;
+		bp->rcv_xmt_reg.index.rcv_comp += 1;
+		}
+	}
+
+
+/*
+ * =====================
+ * = dfx_xmt_queue_pkt =
+ * =====================
+ *
+ * Overview:
+ *   Queues packets for transmission
+ *
+ * Returns:
+ *   Condition code
+ *
+ * Arguments:
+ *   skb - pointer to sk_buff to queue for transmission
+ *   dev - pointer to device information
+ *
+ * Functional Description:
+ *   Here we assume that an incoming skb transmit request
+ *   is contained in a single physically contiguous buffer
+ *   in which the virtual address of the start of packet
+ *   (skb->data) can be converted to a physical address
+ *   by using pci_map_single().
+ *
+ *   Since the adapter architecture requires a three byte
+ *   packet request header to prepend the start of packet,
+ *   we'll write the three byte field immediately prior to
+ *   the FC byte.  This assumption is valid because we've
+ *   ensured that dev->hard_header_len includes three pad
+ *   bytes.  By posting a single fragment to the adapter,
+ *   we'll reduce the number of descriptor fetches and
+ *   bus traffic needed to send the request.
+ *
+ *   Also, we can't free the skb until after it's been DMA'd
+ *   out by the adapter, so we'll queue it in the driver and
+ *   return it in dfx_xmt_done.
+ *
+ * Return Codes:
+ *   0 - driver queued packet, link is unavailable, or skbuff was bad
+ *	 1 - caller should requeue the sk_buff for later transmission
+ *
+ * Assumptions:
+ *	 First and foremost, we assume the incoming skb pointer
+ *   is NOT NULL and is pointing to a valid sk_buff structure.
+ *
+ *   The outgoing packet is complete, starting with the
+ *   frame control byte including the last byte of data,
+ *   but NOT including the 4 byte CRC.  We'll let the
+ *   adapter hardware generate and append the CRC.
+ *
+ *   The entire packet is stored in one physically
+ *   contiguous buffer which is not cached and whose
+ *   32-bit physical address can be determined.
+ *
+ *   It's vital that this routine is NOT reentered for the
+ *   same board and that the OS is not in another section of
+ *   code (eg. dfx_int_common) for the same board on a
+ *   different thread.
+ *
+ * Side Effects:
+ *   None
+ */
+
+static netdev_tx_t dfx_xmt_queue_pkt(struct sk_buff *skb,
+				     struct net_device *dev)
+	{
+	DFX_board_t		*bp = netdev_priv(dev);
+	u8			prod;				/* local transmit producer index */
+	PI_XMT_DESCR		*p_xmt_descr;		/* ptr to transmit descriptor block entry */
+	XMT_DRIVER_DESCR	*p_xmt_drv_descr;	/* ptr to transmit driver descriptor */
+	unsigned long		flags;
+
+	netif_stop_queue(dev);
+
+	/*
+	 * Verify that incoming transmit request is OK
+	 *
+	 * Note: The packet size check is consistent with other
+	 *		 Linux device drivers, although the correct packet
+	 *		 size should be verified before calling the
+	 *		 transmit routine.
+	 */
+
+	if (!IN_RANGE(skb->len, FDDI_K_LLC_ZLEN, FDDI_K_LLC_LEN))
+	{
+		printk("%s: Invalid packet length - %u bytes\n",
+			dev->name, skb->len);
+		bp->xmt_length_errors++;		/* bump error counter */
+		netif_wake_queue(dev);
+		dev_kfree_skb(skb);
+		return NETDEV_TX_OK;			/* return "success" */
+	}
+	/*
+	 * See if adapter link is available, if not, free buffer
+	 *
+	 * Note: If the link isn't available, free buffer and return 0
+	 *		 rather than tell the upper layer to requeue the packet.
+	 *		 The methodology here is that by the time the link
+	 *		 becomes available, the packet to be sent will be
+	 *		 fairly stale.  By simply dropping the packet, the
+	 *		 higher layer protocols will eventually time out
+	 *		 waiting for response packets which it won't receive.
+	 */
+
+	if (bp->link_available == PI_K_FALSE)
+		{
+		if (dfx_hw_adap_state_rd(bp) == PI_STATE_K_LINK_AVAIL)	/* is link really available? */
+			bp->link_available = PI_K_TRUE;		/* if so, set flag and continue */
+		else
+			{
+			bp->xmt_discards++;					/* bump error counter */
+			dev_kfree_skb(skb);		/* free sk_buff now */
+			netif_wake_queue(dev);
+			return NETDEV_TX_OK;		/* return "success" */
+			}
+		}
+
+	spin_lock_irqsave(&bp->lock, flags);
+
+	/* Get the current producer and the next free xmt data descriptor */
+
+	prod		= bp->rcv_xmt_reg.index.xmt_prod;
+	p_xmt_descr = &(bp->descr_block_virt->xmt_data[prod]);
+
+	/*
+	 * Get pointer to auxiliary queue entry to contain information
+	 * for this packet.
+	 *
+	 * Note: The current xmt producer index will become the
+	 *	 current xmt completion index when we complete this
+	 *	 packet later on.  So, we'll get the pointer to the
+	 *	 next auxiliary queue entry now before we bump the
+	 *	 producer index.
+	 */
+
+	p_xmt_drv_descr = &(bp->xmt_drv_descr_blk[prod++]);	/* also bump producer index */
+
+	/* Write the three PRH bytes immediately before the FC byte */
+
+	skb_push(skb,3);
+	skb->data[0] = DFX_PRH0_BYTE;	/* these byte values are defined */
+	skb->data[1] = DFX_PRH1_BYTE;	/* in the Motorola FDDI MAC chip */
+	skb->data[2] = DFX_PRH2_BYTE;	/* specification */
+
+	/*
+	 * Write the descriptor with buffer info and bump producer
+	 *
+	 * Note: Since we need to start DMA from the packet request
+	 *		 header, we'll add 3 bytes to the DMA buffer length,
+	 *		 and we'll determine the physical address of the
+	 *		 buffer from the PRH, not skb->data.
+	 *
+	 * Assumptions:
+	 *		 1. Packet starts with the frame control (FC) byte
+	 *		    at skb->data.
+	 *		 2. The 4-byte CRC is not appended to the buffer or
+	 *			included in the length.
+	 *		 3. Packet length (skb->len) is from FC to end of
+	 *			data, inclusive.
+	 *		 4. The packet length does not exceed the maximum
+	 *			FDDI LLC frame length of 4491 bytes.
+	 *		 5. The entire packet is contained in a physically
+	 *			contiguous, non-cached, locked memory space
+	 *			comprised of a single buffer pointed to by
+	 *			skb->data.
+	 *		 6. The physical address of the start of packet
+	 *			can be determined from the virtual address
+	 *			by using pci_map_single() and is only 32-bits
+	 *			wide.
+	 */
+
+	p_xmt_descr->long_0	= (u32) (PI_XMT_DESCR_M_SOP | PI_XMT_DESCR_M_EOP | ((skb->len) << PI_XMT_DESCR_V_SEG_LEN));
+	p_xmt_descr->long_1 = (u32)dma_map_single(bp->bus_dev, skb->data,
+						  skb->len, DMA_TO_DEVICE);
+
+	/*
+	 * Verify that descriptor is actually available
+	 *
+	 * Note: If descriptor isn't available, return 1 which tells
+	 *	 the upper layer to requeue the packet for later
+	 *	 transmission.
+	 *
+	 *       We need to ensure that the producer never reaches the
+	 *	 completion, except to indicate that the queue is empty.
+	 */
+
+	if (prod == bp->rcv_xmt_reg.index.xmt_comp)
+	{
+		skb_pull(skb,3);
+		spin_unlock_irqrestore(&bp->lock, flags);
+		return NETDEV_TX_BUSY;	/* requeue packet for later */
+	}
+
+	/*
+	 * Save info for this packet for xmt done indication routine
+	 *
+	 * Normally, we'd save the producer index in the p_xmt_drv_descr
+	 * structure so that we'd have it handy when we complete this
+	 * packet later (in dfx_xmt_done).  However, since the current
+	 * transmit architecture guarantees a single fragment for the
+	 * entire packet, we can simply bump the completion index by
+	 * one (1) for each completed packet.
+	 *
+	 * Note: If this assumption changes and we're presented with
+	 *	 an inconsistent number of transmit fragments for packet
+	 *	 data, we'll need to modify this code to save the current
+	 *	 transmit producer index.
+	 */
+
+	p_xmt_drv_descr->p_skb = skb;
+
+	/* Update Type 2 register */
+
+	bp->rcv_xmt_reg.index.xmt_prod = prod;
+	dfx_port_write_long(bp, PI_PDQ_K_REG_TYPE_2_PROD, bp->rcv_xmt_reg.lword);
+	spin_unlock_irqrestore(&bp->lock, flags);
+	netif_wake_queue(dev);
+	return NETDEV_TX_OK;	/* packet queued to adapter */
+	}
+
+
+/*
+ * ================
+ * = dfx_xmt_done =
+ * ================
+ *
+ * Overview:
+ *   Processes all frames that have been transmitted.
+ *
+ * Returns:
+ *   None
+ *
+ * Arguments:
+ *   bp - pointer to board information
+ *
+ * Functional Description:
+ *   For all consumed transmit descriptors that have not
+ *   yet been completed, we'll free the skb we were holding
+ *   onto using dev_kfree_skb and bump the appropriate
+ *   counters.
+ *
+ * Return Codes:
+ *   None
+ *
+ * Assumptions:
+ *   The Type 2 register is not updated in this routine.  It is
+ *   assumed that it will be updated in the ISR when dfx_xmt_done
+ *   returns.
+ *
+ * Side Effects:
+ *   None
+ */
+
+static int dfx_xmt_done(DFX_board_t *bp)
+	{
+	XMT_DRIVER_DESCR	*p_xmt_drv_descr;	/* ptr to transmit driver descriptor */
+	PI_TYPE_2_CONSUMER	*p_type_2_cons;		/* ptr to rcv/xmt consumer block register */
+	u8			comp;			/* local transmit completion index */
+	int 			freed = 0;		/* buffers freed */
+
+	/* Service all consumed transmit frames */
+
+	p_type_2_cons = (PI_TYPE_2_CONSUMER *)(&bp->cons_block_virt->xmt_rcv_data);
+	while (bp->rcv_xmt_reg.index.xmt_comp != p_type_2_cons->index.xmt_cons)
+		{
+		/* Get pointer to the transmit driver descriptor block information */
+
+		p_xmt_drv_descr = &(bp->xmt_drv_descr_blk[bp->rcv_xmt_reg.index.xmt_comp]);
+
+		/* Increment transmit counters */
+
+		bp->xmt_total_frames++;
+		bp->xmt_total_bytes += p_xmt_drv_descr->p_skb->len;
+
+		/* Return skb to operating system */
+		comp = bp->rcv_xmt_reg.index.xmt_comp;
+		dma_unmap_single(bp->bus_dev,
+				 bp->descr_block_virt->xmt_data[comp].long_1,
+				 p_xmt_drv_descr->p_skb->len,
+				 DMA_TO_DEVICE);
+		dev_kfree_skb_irq(p_xmt_drv_descr->p_skb);
+
+		/*
+		 * Move to start of next packet by updating completion index
+		 *
+		 * Here we assume that a transmit packet request is always
+		 * serviced by posting one fragment.  We can therefore
+		 * simplify the completion code by incrementing the
+		 * completion index by one.  This code will need to be
+		 * modified if this assumption changes.  See comments
+		 * in dfx_xmt_queue_pkt for more details.
+		 */
+
+		bp->rcv_xmt_reg.index.xmt_comp += 1;
+		freed++;
+		}
+	return freed;
+	}
+
+
+/*
+ * =================
+ * = dfx_rcv_flush =
+ * =================
+ *
+ * Overview:
+ *   Remove all skb's in the receive ring.
+ *
+ * Returns:
+ *   None
+ *
+ * Arguments:
+ *   bp - pointer to board information
+ *
+ * Functional Description:
+ *   Free's all the dynamically allocated skb's that are
+ *   currently attached to the device receive ring. This
+ *   function is typically only used when the device is
+ *   initialized or reinitialized.
+ *
+ * Return Codes:
+ *   None
+ *
+ * Side Effects:
+ *   None
+ */
+#ifdef DYNAMIC_BUFFERS
+static void dfx_rcv_flush( DFX_board_t *bp )
+	{
+	int i, j;
+
+	for (i = 0; i < (int)(bp->rcv_bufs_to_post); i++)
+		for (j = 0; (i + j) < (int)PI_RCV_DATA_K_NUM_ENTRIES; j += bp->rcv_bufs_to_post)
+		{
+			struct sk_buff *skb;
+			skb = (struct sk_buff *)bp->p_rcv_buff_va[i+j];
+			if (skb)
+				dev_kfree_skb(skb);
+			bp->p_rcv_buff_va[i+j] = NULL;
+		}
+
+	}
+#else
+static inline void dfx_rcv_flush( DFX_board_t *bp )
+{
+}
+#endif /* DYNAMIC_BUFFERS */
+
+/*
+ * =================
+ * = dfx_xmt_flush =
+ * =================
+ *
+ * Overview:
+ *   Processes all frames whether they've been transmitted
+ *   or not.
+ *
+ * Returns:
+ *   None
+ *
+ * Arguments:
+ *   bp - pointer to board information
+ *
+ * Functional Description:
+ *   For all produced transmit descriptors that have not
+ *   yet been completed, we'll free the skb we were holding
+ *   onto using dev_kfree_skb and bump the appropriate
+ *   counters.  Of course, it's possible that some of
+ *   these transmit requests actually did go out, but we
+ *   won't make that distinction here.  Finally, we'll
+ *   update the consumer index to match the producer.
+ *
+ * Return Codes:
+ *   None
+ *
+ * Assumptions:
+ *   This routine does NOT update the Type 2 register.  It
+ *   is assumed that this routine is being called during a
+ *   transmit flush interrupt, or a shutdown or close routine.
+ *
+ * Side Effects:
+ *   None
+ */
+
+static void dfx_xmt_flush( DFX_board_t *bp )
+	{
+	u32			prod_cons;		/* rcv/xmt consumer block longword */
+	XMT_DRIVER_DESCR	*p_xmt_drv_descr;	/* ptr to transmit driver descriptor */
+	u8			comp;			/* local transmit completion index */
+
+	/* Flush all outstanding transmit frames */
+
+	while (bp->rcv_xmt_reg.index.xmt_comp != bp->rcv_xmt_reg.index.xmt_prod)
+		{
+		/* Get pointer to the transmit driver descriptor block information */
+
+		p_xmt_drv_descr = &(bp->xmt_drv_descr_blk[bp->rcv_xmt_reg.index.xmt_comp]);
+
+		/* Return skb to operating system */
+		comp = bp->rcv_xmt_reg.index.xmt_comp;
+		dma_unmap_single(bp->bus_dev,
+				 bp->descr_block_virt->xmt_data[comp].long_1,
+				 p_xmt_drv_descr->p_skb->len,
+				 DMA_TO_DEVICE);
+		dev_kfree_skb(p_xmt_drv_descr->p_skb);
+
+		/* Increment transmit error counter */
+
+		bp->xmt_discards++;
+
+		/*
+		 * Move to start of next packet by updating completion index
+		 *
+		 * Here we assume that a transmit packet request is always
+		 * serviced by posting one fragment.  We can therefore
+		 * simplify the completion code by incrementing the
+		 * completion index by one.  This code will need to be
+		 * modified if this assumption changes.  See comments
+		 * in dfx_xmt_queue_pkt for more details.
+		 */
+
+		bp->rcv_xmt_reg.index.xmt_comp += 1;
+		}
+
+	/* Update the transmit consumer index in the consumer block */
+
+	prod_cons = (u32)(bp->cons_block_virt->xmt_rcv_data & ~PI_CONS_M_XMT_INDEX);
+	prod_cons |= (u32)(bp->rcv_xmt_reg.index.xmt_prod << PI_CONS_V_XMT_INDEX);
+	bp->cons_block_virt->xmt_rcv_data = prod_cons;
+	}
+
+/*
+ * ==================
+ * = dfx_unregister =
+ * ==================
+ *
+ * Overview:
+ *   Shuts down an FDDI controller
+ *
+ * Returns:
+ *   Condition code
+ *
+ * Arguments:
+ *   bdev - pointer to device information
+ *
+ * Functional Description:
+ *
+ * Return Codes:
+ *   None
+ *
+ * Assumptions:
+ *   It compiles so it should work :-( (PCI cards do :-)
+ *
+ * Side Effects:
+ *   Device structures for FDDI adapters (fddi0, fddi1, etc) are
+ *   freed.
+ */
+static void __devexit dfx_unregister(struct device *bdev)
+{
+	struct net_device *dev = dev_get_drvdata(bdev);
+	DFX_board_t *bp = netdev_priv(dev);
+	int dfx_bus_pci = DFX_BUS_PCI(bdev);
+	int dfx_bus_tc = DFX_BUS_TC(bdev);
+	int dfx_use_mmio = DFX_MMIO || dfx_bus_tc;
+	resource_size_t bar_start = 0;		/* pointer to port */
+	resource_size_t bar_len = 0;		/* resource length */
+	int		alloc_size;		/* total buffer size used */
+
+	unregister_netdev(dev);
+
+	alloc_size = sizeof(PI_DESCR_BLOCK) +
+		     PI_CMD_REQ_K_SIZE_MAX + PI_CMD_RSP_K_SIZE_MAX +
+#ifndef DYNAMIC_BUFFERS
+		     (bp->rcv_bufs_to_post * PI_RCV_DATA_K_SIZE_MAX) +
+#endif
+		     sizeof(PI_CONSUMER_BLOCK) +
+		     (PI_ALIGN_K_DESC_BLK - 1);
+	if (bp->kmalloced)
+		dma_free_coherent(bdev, alloc_size,
+				  bp->kmalloced, bp->kmalloced_dma);
+
+	dfx_bus_uninit(dev);
+
+	dfx_get_bars(bdev, &bar_start, &bar_len);
+	if (dfx_use_mmio) {
+		iounmap(bp->base.mem);
+		release_mem_region(bar_start, bar_len);
+	} else
+		release_region(bar_start, bar_len);
+
+	if (dfx_bus_pci)
+		pci_disable_device(to_pci_dev(bdev));
+
+	free_netdev(dev);
+}
+
+
+static int __devinit __maybe_unused dfx_dev_register(struct device *);
+static int __devexit __maybe_unused dfx_dev_unregister(struct device *);
+
+#ifdef CONFIG_PCI
+static int __devinit dfx_pci_register(struct pci_dev *,
+				      const struct pci_device_id *);
+static void __devexit dfx_pci_unregister(struct pci_dev *);
+
+static DEFINE_PCI_DEVICE_TABLE(dfx_pci_table) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_FDDI) },
+	{ }
+};
+MODULE_DEVICE_TABLE(pci, dfx_pci_table);
+
+static struct pci_driver dfx_pci_driver = {
+	.name		= "defxx",
+	.id_table	= dfx_pci_table,
+	.probe		= dfx_pci_register,
+	.remove		= __devexit_p(dfx_pci_unregister),
+};
+
+static __devinit int dfx_pci_register(struct pci_dev *pdev,
+				      const struct pci_device_id *ent)
+{
+	return dfx_register(&pdev->dev);
+}
+
+static void __devexit dfx_pci_unregister(struct pci_dev *pdev)
+{
+	dfx_unregister(&pdev->dev);
+}
+#endif /* CONFIG_PCI */
+
+#ifdef CONFIG_EISA
+static struct eisa_device_id dfx_eisa_table[] = {
+        { "DEC3001", DEFEA_PROD_ID_1 },
+        { "DEC3002", DEFEA_PROD_ID_2 },
+        { "DEC3003", DEFEA_PROD_ID_3 },
+        { "DEC3004", DEFEA_PROD_ID_4 },
+        { }
+};
+MODULE_DEVICE_TABLE(eisa, dfx_eisa_table);
+
+static struct eisa_driver dfx_eisa_driver = {
+	.id_table	= dfx_eisa_table,
+	.driver		= {
+		.name	= "defxx",
+		.bus	= &eisa_bus_type,
+		.probe	= dfx_dev_register,
+		.remove	= __devexit_p(dfx_dev_unregister),
+	},
+};
+#endif /* CONFIG_EISA */
+
+#ifdef CONFIG_TC
+static struct tc_device_id const dfx_tc_table[] = {
+	{ "DEC     ", "PMAF-FA " },
+	{ "DEC     ", "PMAF-FD " },
+	{ "DEC     ", "PMAF-FS " },
+	{ "DEC     ", "PMAF-FU " },
+	{ }
+};
+MODULE_DEVICE_TABLE(tc, dfx_tc_table);
+
+static struct tc_driver dfx_tc_driver = {
+	.id_table	= dfx_tc_table,
+	.driver		= {
+		.name	= "defxx",
+		.bus	= &tc_bus_type,
+		.probe	= dfx_dev_register,
+		.remove	= __devexit_p(dfx_dev_unregister),
+	},
+};
+#endif /* CONFIG_TC */
+
+static int __devinit __maybe_unused dfx_dev_register(struct device *dev)
+{
+	int status;
+
+	status = dfx_register(dev);
+	if (!status)
+		get_device(dev);
+	return status;
+}
+
+static int __devexit __maybe_unused dfx_dev_unregister(struct device *dev)
+{
+	put_device(dev);
+	dfx_unregister(dev);
+	return 0;
+}
+
+
+static int __devinit dfx_init(void)
+{
+	int status;
+
+	status = pci_register_driver(&dfx_pci_driver);
+	if (!status)
+		status = eisa_driver_register(&dfx_eisa_driver);
+	if (!status)
+		status = tc_register_driver(&dfx_tc_driver);
+	return status;
+}
+
+static void __devexit dfx_cleanup(void)
+{
+	tc_unregister_driver(&dfx_tc_driver);
+	eisa_driver_unregister(&dfx_eisa_driver);
+	pci_unregister_driver(&dfx_pci_driver);
+}
+
+module_init(dfx_init);
+module_exit(dfx_cleanup);
+MODULE_AUTHOR("Lawrence V. Stefani");
+MODULE_DESCRIPTION("DEC FDDIcontroller TC/EISA/PCI (DEFTA/DEFEA/DEFPA) driver "
+		   DRV_VERSION " " DRV_RELDATE);
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/fddi/defxx.h b/drivers/net/fddi/defxx.h
new file mode 100644
index 0000000..19a6f64
--- /dev/null
+++ b/drivers/net/fddi/defxx.h
@@ -0,0 +1,1801 @@
+/*
+ * File Name:
+ *   defxx.h
+ *
+ * Copyright Information:
+ *   Copyright Digital Equipment Corporation 1996.
+ *
+ *   This software may be used and distributed according to the terms of
+ *   the GNU General Public License, incorporated herein by reference.
+ *
+ * Abstract:
+ *   Contains all definitions specified by port specification and required
+ *   by the defxx.c driver.
+ *
+ * The original author:
+ *   LVS	Lawrence V. Stefani <lstefani@yahoo.com>
+ *
+ * Maintainers:
+ *   macro	Maciej W. Rozycki <macro@linux-mips.org>
+ *
+ * Modification History:
+ *		Date		Name	Description
+ *		16-Aug-96	LVS		Created.
+ *		09-Sep-96	LVS		Added group_prom field.  Moved read/write I/O
+ *							macros to DEFXX.C.
+ *		12-Sep-96	LVS		Removed packet request header pointers.
+ *		04 Aug 2003	macro		Converted to the DMA API.
+ *		23 Oct 2006	macro		Big-endian host support.
+ *		14 Dec 2006	macro		TURBOchannel support.
+ */
+
+#ifndef _DEFXX_H_
+#define _DEFXX_H_
+
+/* Define basic types for unsigned chars, shorts, longs */
+
+typedef u8	PI_UINT8;
+typedef u16	PI_UINT16;
+typedef u32	PI_UINT32;
+
+/* Define general structures */
+
+typedef struct							/* 64-bit counter */
+	{
+	PI_UINT32  ms;
+	PI_UINT32  ls;
+	} PI_CNTR;
+
+typedef struct							/* LAN address */
+	{
+	PI_UINT32  lwrd_0;
+	PI_UINT32  lwrd_1;
+	} PI_LAN_ADDR;
+
+typedef struct							/* Station ID address */
+	{
+	PI_UINT32  octet_7_4;
+	PI_UINT32  octet_3_0;
+	} PI_STATION_ID;
+
+
+/* Define general constants */
+
+#define PI_ALIGN_K_DESC_BLK	  			8192	/* Descriptor block boundary		*/
+#define PI_ALIGN_K_CONS_BLK	  	 		64		/* Consumer block boundary		  	*/
+#define PI_ALIGN_K_CMD_REQ_BUFF  		128	 	/* Xmt Command que buffer alignment */
+#define PI_ALIGN_K_CMD_RSP_BUFF	 		128	 	/* Rcv Command que buffer alignment */
+#define PI_ALIGN_K_UNSOL_BUFF	 		128	 	/* Unsol que buffer alignment	   	*/
+#define PI_ALIGN_K_XMT_DATA_BUFF 		0	   	/* Xmt data que buffer alignment	*/
+#define PI_ALIGN_K_RCV_DATA_BUFF 		128	 	/* Rcv que buffer alignment			*/
+
+/* Define PHY index values */
+
+#define PI_PHY_K_S						0		/* Index to S phy */
+#define PI_PHY_K_A						0		/* Index to A phy */
+#define PI_PHY_K_B						1		/* Index to B phy */
+#define PI_PHY_K_MAX					2		/* Max number of phys */
+
+/* Define FMC descriptor fields */
+
+#define PI_FMC_DESCR_V_SOP				31
+#define PI_FMC_DESCR_V_EOP				30
+#define PI_FMC_DESCR_V_FSC				27
+#define PI_FMC_DESCR_V_FSB_ERROR		26
+#define PI_FMC_DESCR_V_FSB_ADDR_RECOG	25
+#define PI_FMC_DESCR_V_FSB_ADDR_COPIED	24
+#define PI_FMC_DESCR_V_FSB				22
+#define PI_FMC_DESCR_V_RCC_FLUSH		21
+#define PI_FMC_DESCR_V_RCC_CRC			20
+#define PI_FMC_DESCR_V_RCC_RRR			17
+#define PI_FMC_DESCR_V_RCC_DD			15
+#define PI_FMC_DESCR_V_RCC_SS			13
+#define PI_FMC_DESCR_V_RCC				13
+#define PI_FMC_DESCR_V_LEN				0
+
+#define PI_FMC_DESCR_M_SOP				0x80000000
+#define PI_FMC_DESCR_M_EOP				0x40000000
+#define PI_FMC_DESCR_M_FSC				0x38000000
+#define PI_FMC_DESCR_M_FSB_ERROR		0x04000000
+#define PI_FMC_DESCR_M_FSB_ADDR_RECOG	0x02000000
+#define PI_FMC_DESCR_M_FSB_ADDR_COPIED	0x01000000
+#define PI_FMC_DESCR_M_FSB				0x07C00000
+#define PI_FMC_DESCR_M_RCC_FLUSH		0x00200000
+#define PI_FMC_DESCR_M_RCC_CRC			0x00100000
+#define PI_FMC_DESCR_M_RCC_RRR			0x000E0000
+#define PI_FMC_DESCR_M_RCC_DD			0x00018000
+#define PI_FMC_DESCR_M_RCC_SS			0x00006000
+#define PI_FMC_DESCR_M_RCC				0x003FE000
+#define PI_FMC_DESCR_M_LEN				0x00001FFF
+
+#define PI_FMC_DESCR_K_RCC_FMC_INT_ERR	0x01AA
+
+#define PI_FMC_DESCR_K_RRR_SUCCESS		0x00
+#define PI_FMC_DESCR_K_RRR_SA_MATCH		0x01
+#define PI_FMC_DESCR_K_RRR_DA_MATCH		0x02
+#define PI_FMC_DESCR_K_RRR_FMC_ABORT	0x03
+#define PI_FMC_DESCR_K_RRR_LENGTH_BAD	0x04
+#define PI_FMC_DESCR_K_RRR_FRAGMENT		0x05
+#define PI_FMC_DESCR_K_RRR_FORMAT_ERR	0x06
+#define PI_FMC_DESCR_K_RRR_MAC_RESET	0x07
+
+#define PI_FMC_DESCR_K_DD_NO_MATCH		0x0
+#define PI_FMC_DESCR_K_DD_PROMISCUOUS	0x1
+#define PI_FMC_DESCR_K_DD_CAM_MATCH		0x2
+#define PI_FMC_DESCR_K_DD_LOCAL_MATCH	0x3
+
+#define PI_FMC_DESCR_K_SS_NO_MATCH		0x0
+#define PI_FMC_DESCR_K_SS_BRIDGE_MATCH	0x1
+#define PI_FMC_DESCR_K_SS_NOT_POSSIBLE	0x2
+#define PI_FMC_DESCR_K_SS_LOCAL_MATCH	0x3
+
+/* Define some max buffer sizes */
+
+#define PI_CMD_REQ_K_SIZE_MAX			512
+#define PI_CMD_RSP_K_SIZE_MAX			512
+#define PI_UNSOL_K_SIZE_MAX				512
+#define PI_SMT_HOST_K_SIZE_MAX			4608		/* 4 1/2 K */
+#define PI_RCV_DATA_K_SIZE_MAX			4608		/* 4 1/2 K */
+#define PI_XMT_DATA_K_SIZE_MAX			4608		/* 4 1/2 K */
+
+/* Define adapter states */
+
+#define PI_STATE_K_RESET				0
+#define PI_STATE_K_UPGRADE		  		1
+#define PI_STATE_K_DMA_UNAVAIL			2
+#define PI_STATE_K_DMA_AVAIL			3
+#define PI_STATE_K_LINK_AVAIL			4
+#define PI_STATE_K_LINK_UNAVAIL	 		5
+#define PI_STATE_K_HALTED		   		6
+#define PI_STATE_K_RING_MEMBER			7
+#define PI_STATE_K_NUMBER				8
+
+/* Define codes for command type */
+
+#define PI_CMD_K_START					0x00
+#define PI_CMD_K_FILTERS_SET			0x01
+#define PI_CMD_K_FILTERS_GET			0x02
+#define PI_CMD_K_CHARS_SET				0x03
+#define PI_CMD_K_STATUS_CHARS_GET		0x04
+#define PI_CMD_K_CNTRS_GET				0x05
+#define PI_CMD_K_CNTRS_SET				0x06
+#define PI_CMD_K_ADDR_FILTER_SET		0x07
+#define PI_CMD_K_ADDR_FILTER_GET		0x08
+#define PI_CMD_K_ERROR_LOG_CLEAR		0x09
+#define PI_CMD_K_ERROR_LOG_GET			0x0A
+#define PI_CMD_K_FDDI_MIB_GET			0x0B
+#define PI_CMD_K_DEC_EXT_MIB_GET		0x0C
+#define PI_CMD_K_DEVICE_SPECIFIC_GET	0x0D
+#define PI_CMD_K_SNMP_SET				0x0E
+#define PI_CMD_K_UNSOL_TEST				0x0F
+#define PI_CMD_K_SMT_MIB_GET			0x10
+#define PI_CMD_K_SMT_MIB_SET			0x11
+#define PI_CMD_K_MAX					0x11	/* Must match last */
+
+/* Define item codes for Chars_Set and Filters_Set commands */
+
+#define PI_ITEM_K_EOL					0x00 	/* End-of-Item list 		  */
+#define PI_ITEM_K_T_REQ					0x01 	/* DECnet T_REQ 			  */
+#define PI_ITEM_K_TVX					0x02 	/* DECnet TVX 				  */
+#define PI_ITEM_K_RESTRICTED_TOKEN		0x03 	/* DECnet Restricted Token 	  */
+#define PI_ITEM_K_LEM_THRESHOLD			0x04 	/* DECnet LEM Threshold 	  */
+#define PI_ITEM_K_RING_PURGER			0x05 	/* DECnet Ring Purger Enable  */
+#define PI_ITEM_K_CNTR_INTERVAL			0x06 	/* Chars_Set 				  */
+#define PI_ITEM_K_IND_GROUP_PROM		0x07 	/* Filters_Set 				  */
+#define PI_ITEM_K_GROUP_PROM			0x08 	/* Filters_Set 				  */
+#define PI_ITEM_K_BROADCAST				0x09 	/* Filters_Set 				  */
+#define PI_ITEM_K_SMT_PROM				0x0A 	/* Filters_Set				  */
+#define PI_ITEM_K_SMT_USER				0x0B 	/* Filters_Set 				  */
+#define PI_ITEM_K_RESERVED				0x0C 	/* Filters_Set 				  */
+#define PI_ITEM_K_IMPLEMENTOR			0x0D 	/* Filters_Set 				  */
+#define PI_ITEM_K_LOOPBACK_MODE			0x0E 	/* Chars_Set 				  */
+#define PI_ITEM_K_CONFIG_POLICY			0x10 	/* SMTConfigPolicy 			  */
+#define PI_ITEM_K_CON_POLICY			0x11 	/* SMTConnectionPolicy 		  */
+#define PI_ITEM_K_T_NOTIFY				0x12 	/* SMTTNotify 				  */
+#define PI_ITEM_K_STATION_ACTION		0x13 	/* SMTStationAction			  */
+#define PI_ITEM_K_MAC_PATHS_REQ	   		0x15 	/* MACPathsRequested 		  */
+#define PI_ITEM_K_MAC_ACTION			0x17 	/* MACAction 				  */
+#define PI_ITEM_K_CON_POLICIES			0x18 	/* PORTConnectionPolicies	  */
+#define PI_ITEM_K_PORT_PATHS_REQ		0x19 	/* PORTPathsRequested 		  */
+#define PI_ITEM_K_MAC_LOOP_TIME			0x1A 	/* PORTMACLoopTime 			  */
+#define PI_ITEM_K_TB_MAX				0x1B 	/* PORTTBMax 				  */
+#define PI_ITEM_K_LER_CUTOFF			0x1C 	/* PORTLerCutoff 			  */
+#define PI_ITEM_K_LER_ALARM				0x1D 	/* PORTLerAlarm 			  */
+#define PI_ITEM_K_PORT_ACTION			0x1E 	/* PORTAction 				  */
+#define PI_ITEM_K_FLUSH_TIME			0x20 	/* Chars_Set 				  */
+#define PI_ITEM_K_MAC_T_REQ				0x29 	/* MACTReq 					  */
+#define PI_ITEM_K_EMAC_RING_PURGER		0x2A 	/* eMACRingPurgerEnable		  */
+#define PI_ITEM_K_EMAC_RTOKEN_TIMEOUT	0x2B 	/* eMACRestrictedTokenTimeout */
+#define PI_ITEM_K_FDX_ENB_DIS			0x2C 	/* eFDXEnable				  */
+#define PI_ITEM_K_MAX					0x2C 	/* Must equal high item		  */
+
+/* Values for some of the items */
+
+#define PI_K_FALSE						0	   /* Generic false */
+#define PI_K_TRUE						1	   /* Generic true  */
+
+#define PI_SNMP_K_TRUE					1	   /* SNMP true/false values */
+#define PI_SNMP_K_FALSE					2
+
+#define PI_FSTATE_K_BLOCK				0	   /* Filter State */
+#define PI_FSTATE_K_PASS				1
+
+/* Define command return codes */
+
+#define PI_RSP_K_SUCCESS				0x00
+#define PI_RSP_K_FAILURE				0x01
+#define PI_RSP_K_WARNING				0x02
+#define PI_RSP_K_LOOP_MODE_BAD			0x03
+#define PI_RSP_K_ITEM_CODE_BAD			0x04
+#define PI_RSP_K_TVX_BAD				0x05
+#define PI_RSP_K_TREQ_BAD				0x06
+#define PI_RSP_K_TOKEN_BAD				0x07
+#define PI_RSP_K_NO_EOL					0x0C
+#define PI_RSP_K_FILTER_STATE_BAD		0x0D
+#define PI_RSP_K_CMD_TYPE_BAD			0x0E
+#define PI_RSP_K_ADAPTER_STATE_BAD		0x0F
+#define PI_RSP_K_RING_PURGER_BAD		0x10
+#define PI_RSP_K_LEM_THRESHOLD_BAD		0x11
+#define PI_RSP_K_LOOP_NOT_SUPPORTED		0x12
+#define PI_RSP_K_FLUSH_TIME_BAD			0x13
+#define PI_RSP_K_NOT_IMPLEMENTED		0x14
+#define PI_RSP_K_CONFIG_POLICY_BAD		0x15
+#define PI_RSP_K_STATION_ACTION_BAD		0x16
+#define PI_RSP_K_MAC_ACTION_BAD			0x17
+#define PI_RSP_K_CON_POLICIES_BAD		0x18
+#define PI_RSP_K_MAC_LOOP_TIME_BAD		0x19
+#define PI_RSP_K_TB_MAX_BAD				0x1A
+#define PI_RSP_K_LER_CUTOFF_BAD			0x1B
+#define PI_RSP_K_LER_ALARM_BAD			0x1C
+#define PI_RSP_K_MAC_PATHS_REQ_BAD		0x1D
+#define PI_RSP_K_MAC_T_REQ_BAD			0x1E
+#define PI_RSP_K_EMAC_RING_PURGER_BAD	0x1F
+#define PI_RSP_K_EMAC_RTOKEN_TIME_BAD	0x20
+#define PI_RSP_K_NO_SUCH_ENTRY			0x21
+#define PI_RSP_K_T_NOTIFY_BAD			0x22
+#define PI_RSP_K_TR_MAX_EXP_BAD			0x23
+#define PI_RSP_K_MAC_FRM_ERR_THR_BAD	0x24
+#define PI_RSP_K_MAX_T_REQ_BAD			0x25
+#define PI_RSP_K_FDX_ENB_DIS_BAD		0x26
+#define PI_RSP_K_ITEM_INDEX_BAD			0x27
+#define PI_RSP_K_PORT_ACTION_BAD		0x28
+
+/* Commonly used structures */
+
+typedef struct									/* Item list */
+	{
+	PI_UINT32  item_code;
+	PI_UINT32  value;
+	} PI_ITEM_LIST;
+
+typedef struct									/* Response header */
+	{
+	PI_UINT32  reserved;
+	PI_UINT32  cmd_type;
+	PI_UINT32  status;
+	} PI_RSP_HEADER;
+
+
+/* Start Command */
+
+typedef struct
+	{
+	PI_UINT32  cmd_type;
+	} PI_CMD_START_REQ;
+
+/* Start Response */
+
+typedef struct
+	{
+	PI_RSP_HEADER   header;
+	} PI_CMD_START_RSP;
+
+/* Filters_Set Request */
+
+#define PI_CMD_FILTERS_SET_K_ITEMS_MAX  63		/* Fits in a 512 byte buffer */
+
+typedef struct
+	{
+	PI_UINT32		cmd_type;
+	PI_ITEM_LIST	item[PI_CMD_FILTERS_SET_K_ITEMS_MAX];
+	} PI_CMD_FILTERS_SET_REQ;
+
+/* Filters_Set Response */
+
+typedef struct
+	{
+	PI_RSP_HEADER   header;
+	} PI_CMD_FILTERS_SET_RSP;
+
+/* Filters_Get Request */
+
+typedef struct
+	{
+	PI_UINT32		cmd_type;
+	} PI_CMD_FILTERS_GET_REQ;
+
+/* Filters_Get Response */
+
+typedef struct
+	{
+	PI_RSP_HEADER   header;
+	PI_UINT32		ind_group_prom;
+	PI_UINT32		group_prom;
+	PI_UINT32		broadcast_all;
+	PI_UINT32		smt_all;
+	PI_UINT32		smt_user;
+	PI_UINT32		reserved_all;
+	PI_UINT32		implementor_all;
+	} PI_CMD_FILTERS_GET_RSP;
+
+
+/* Chars_Set Request */
+
+#define PI_CMD_CHARS_SET_K_ITEMS_MAX 42		/* Fits in a 512 byte buffer */
+
+typedef struct
+	{
+	PI_UINT32		cmd_type;
+	struct							  		/* Item list */
+		{
+		PI_UINT32	item_code;
+		PI_UINT32	value;
+		PI_UINT32	item_index;
+		} item[PI_CMD_CHARS_SET_K_ITEMS_MAX];
+	} PI_CMD_CHARS_SET_REQ;
+
+/* Chars_Set Response */
+
+typedef struct
+	{
+	PI_RSP_HEADER   header;
+	} PI_CMD_CHARS_SET_RSP;
+
+
+/* SNMP_Set Request */
+
+#define PI_CMD_SNMP_SET_K_ITEMS_MAX 42	   	/* Fits in a 512 byte buffer */
+
+typedef struct
+	{
+	PI_UINT32		cmd_type;
+	struct							   		/* Item list */
+		{
+		PI_UINT32	item_code;
+		PI_UINT32	value;
+		PI_UINT32	item_index;
+		} item[PI_CMD_SNMP_SET_K_ITEMS_MAX];
+	} PI_CMD_SNMP_SET_REQ;
+
+/* SNMP_Set Response */
+
+typedef struct
+	{
+	PI_RSP_HEADER   header;
+	} PI_CMD_SNMP_SET_RSP;
+
+
+/* SMT_MIB_Set Request */
+
+#define PI_CMD_SMT_MIB_SET_K_ITEMS_MAX 42	/* Max number of items */
+
+typedef struct
+	{
+	PI_UINT32	cmd_type;
+	struct
+		{
+		PI_UINT32	item_code;
+		PI_UINT32	value;
+		PI_UINT32	item_index;
+		} item[PI_CMD_SMT_MIB_SET_K_ITEMS_MAX];
+	} PI_CMD_SMT_MIB_SET_REQ;
+
+/* SMT_MIB_Set Response */
+
+typedef struct
+	{
+	PI_RSP_HEADER   header;
+	} PI_CMD_SMT_MIB_SET_RSP;
+
+/* SMT_MIB_Get Request */
+
+typedef struct
+	{
+	PI_UINT32  cmd_type;
+	} PI_CMD_SMT_MIB_GET_REQ;
+
+/* SMT_MIB_Get Response */
+
+typedef struct						  /* Refer to ANSI FDDI SMT Rev. 7.3 */
+	{
+	PI_RSP_HEADER  header;
+
+	/* SMT GROUP */
+
+	PI_STATION_ID  	smt_station_id;
+	PI_UINT32 		smt_op_version_id;
+	PI_UINT32	   	smt_hi_version_id;
+	PI_UINT32	   	smt_lo_version_id;
+	PI_UINT32	   	smt_user_data[8];
+	PI_UINT32	   	smt_mib_version_id;
+	PI_UINT32	   	smt_mac_ct;
+	PI_UINT32	   	smt_non_master_ct;
+	PI_UINT32	   	smt_master_ct;
+	PI_UINT32	   	smt_available_paths;
+	PI_UINT32	   	smt_config_capabilities;
+	PI_UINT32	   	smt_config_policy;
+	PI_UINT32	   	smt_connection_policy;
+	PI_UINT32	   	smt_t_notify;
+	PI_UINT32	   	smt_stat_rpt_policy;
+	PI_UINT32	   	smt_trace_max_expiration;
+	PI_UINT32	   	smt_bypass_present;
+	PI_UINT32	  	smt_ecm_state;
+	PI_UINT32	   	smt_cf_state;
+	PI_UINT32	   	smt_remote_disconnect_flag;
+	PI_UINT32	   	smt_station_status;
+	PI_UINT32	   	smt_peer_wrap_flag;
+	PI_CNTR	   		smt_msg_time_stamp;
+	PI_CNTR	  		smt_transition_time_stamp;
+
+	/* MAC GROUP */
+
+	PI_UINT32		mac_frame_status_functions;
+	PI_UINT32		mac_t_max_capability;
+	PI_UINT32		mac_tvx_capability;
+	PI_UINT32		mac_available_paths;
+	PI_UINT32		mac_current_path;
+	PI_LAN_ADDR		mac_upstream_nbr;
+	PI_LAN_ADDR		mac_downstream_nbr;
+	PI_LAN_ADDR		mac_old_upstream_nbr;
+	PI_LAN_ADDR		mac_old_downstream_nbr;
+	PI_UINT32	   	mac_dup_address_test;
+	PI_UINT32	   	mac_requested_paths;
+	PI_UINT32	   	mac_downstream_port_type;
+	PI_LAN_ADDR		mac_smt_address;
+	PI_UINT32		mac_t_req;
+	PI_UINT32		mac_t_neg;
+	PI_UINT32		mac_t_max;
+	PI_UINT32		mac_tvx_value;
+	PI_UINT32		mac_frame_error_threshold;
+	PI_UINT32		mac_frame_error_ratio;
+	PI_UINT32		mac_rmt_state;
+	PI_UINT32		mac_da_flag;
+	PI_UINT32		mac_unda_flag;
+	PI_UINT32		mac_frame_error_flag;
+	PI_UINT32		mac_ma_unitdata_available;
+	PI_UINT32		mac_hardware_present;
+	PI_UINT32		mac_ma_unitdata_enable;
+
+	/* PATH GROUP */
+
+	PI_UINT32		path_configuration[8];
+	PI_UINT32		path_tvx_lower_bound;
+	PI_UINT32		path_t_max_lower_bound;
+	PI_UINT32		path_max_t_req;
+
+	/* PORT GROUP */
+
+	PI_UINT32		port_my_type[PI_PHY_K_MAX];
+	PI_UINT32		port_neighbor_type[PI_PHY_K_MAX];
+	PI_UINT32		port_connection_policies[PI_PHY_K_MAX];
+	PI_UINT32		port_mac_indicated[PI_PHY_K_MAX];
+	PI_UINT32		port_current_path[PI_PHY_K_MAX];
+	PI_UINT32		port_requested_paths[PI_PHY_K_MAX];
+	PI_UINT32		port_mac_placement[PI_PHY_K_MAX];
+	PI_UINT32		port_available_paths[PI_PHY_K_MAX];
+	PI_UINT32		port_pmd_class[PI_PHY_K_MAX];
+	PI_UINT32		port_connection_capabilities[PI_PHY_K_MAX];
+	PI_UINT32		port_bs_flag[PI_PHY_K_MAX];
+	PI_UINT32		port_ler_estimate[PI_PHY_K_MAX];
+	PI_UINT32		port_ler_cutoff[PI_PHY_K_MAX];
+	PI_UINT32		port_ler_alarm[PI_PHY_K_MAX];
+	PI_UINT32		port_connect_state[PI_PHY_K_MAX];
+	PI_UINT32		port_pcm_state[PI_PHY_K_MAX];
+	PI_UINT32		port_pc_withhold[PI_PHY_K_MAX];
+	PI_UINT32		port_ler_flag[PI_PHY_K_MAX];
+	PI_UINT32		port_hardware_present[PI_PHY_K_MAX];
+
+	/* GROUP for things that were added later, so must be at the end. */
+
+	PI_CNTR	   		path_ring_latency;
+
+	} PI_CMD_SMT_MIB_GET_RSP;
+
+
+/*
+ *  Item and group code definitions for SMT 7.3 mandatory objects.  These
+ *  definitions are to be used as appropriate in SMT_MIB_SET commands and
+ *  certain host-sent SMT frames such as PMF Get and Set requests.  The
+ *  codes have been taken from the MIB summary section of ANSI SMT 7.3.
+ */
+
+#define PI_GRP_K_SMT_STATION_ID			0x100A
+#define PI_ITEM_K_SMT_STATION_ID		0x100B
+#define PI_ITEM_K_SMT_OP_VERS_ID		0x100D
+#define PI_ITEM_K_SMT_HI_VERS_ID		0x100E
+#define PI_ITEM_K_SMT_LO_VERS_ID		0x100F
+#define PI_ITEM_K_SMT_USER_DATA			0x1011
+#define PI_ITEM_K_SMT_MIB_VERS_ID	  	0x1012
+
+#define PI_GRP_K_SMT_STATION_CONFIG		0x1014
+#define PI_ITEM_K_SMT_MAC_CT			0x1015
+#define PI_ITEM_K_SMT_NON_MASTER_CT		0x1016
+#define PI_ITEM_K_SMT_MASTER_CT			0x1017
+#define PI_ITEM_K_SMT_AVAIL_PATHS		0x1018
+#define PI_ITEM_K_SMT_CONFIG_CAPS		0x1019
+#define PI_ITEM_K_SMT_CONFIG_POL		0x101A
+#define PI_ITEM_K_SMT_CONN_POL			0x101B
+#define PI_ITEM_K_SMT_T_NOTIFY			0x101D
+#define PI_ITEM_K_SMT_STAT_POL			0x101E
+#define PI_ITEM_K_SMT_TR_MAX_EXP		0x101F
+#define PI_ITEM_K_SMT_PORT_INDEXES		0x1020
+#define PI_ITEM_K_SMT_MAC_INDEXES		0x1021
+#define PI_ITEM_K_SMT_BYPASS_PRESENT	0x1022
+
+#define PI_GRP_K_SMT_STATUS				0x1028
+#define PI_ITEM_K_SMT_ECM_STATE			0x1029
+#define PI_ITEM_K_SMT_CF_STATE		 	0x102A
+#define PI_ITEM_K_SMT_REM_DISC_FLAG		0x102C
+#define PI_ITEM_K_SMT_STATION_STATUS	0x102D
+#define PI_ITEM_K_SMT_PEER_WRAP_FLAG	0x102E
+
+#define PI_GRP_K_SMT_MIB_OPERATION	 	0x1032
+#define PI_ITEM_K_SMT_MSG_TIME_STAMP 	0x1033
+#define PI_ITEM_K_SMT_TRN_TIME_STAMP 	0x1034
+
+#define PI_ITEM_K_SMT_STATION_ACT		0x103C
+
+#define PI_GRP_K_MAC_CAPABILITIES	  	0x200A
+#define PI_ITEM_K_MAC_FRM_STAT_FUNC		0x200B
+#define PI_ITEM_K_MAC_T_MAX_CAP			0x200D
+#define PI_ITEM_K_MAC_TVX_CAP		  	0x200E
+
+#define PI_GRP_K_MAC_CONFIG				0x2014
+#define PI_ITEM_K_MAC_AVAIL_PATHS	  	0x2016
+#define PI_ITEM_K_MAC_CURRENT_PATH	 	0x2017
+#define PI_ITEM_K_MAC_UP_NBR			0x2018
+#define PI_ITEM_K_MAC_DOWN_NBR			0x2019
+#define PI_ITEM_K_MAC_OLD_UP_NBR	 	0x201A
+#define PI_ITEM_K_MAC_OLD_DOWN_NBR	 	0x201B
+#define PI_ITEM_K_MAC_DUP_ADDR_TEST		0x201D
+#define PI_ITEM_K_MAC_REQ_PATHS			0x2020
+#define PI_ITEM_K_MAC_DOWN_PORT_TYPE   	0x2021
+#define PI_ITEM_K_MAC_INDEX				0x2022
+
+#define PI_GRP_K_MAC_ADDRESS			0x2028
+#define PI_ITEM_K_MAC_SMT_ADDRESS		0x2029
+
+#define PI_GRP_K_MAC_OPERATION			0x2032
+#define PI_ITEM_K_MAC_TREQ				0x2033
+#define PI_ITEM_K_MAC_TNEG				0x2034
+#define PI_ITEM_K_MAC_TMAX				0x2035
+#define PI_ITEM_K_MAC_TVX_VALUE			0x2036
+
+#define PI_GRP_K_MAC_COUNTERS			0x2046
+#define PI_ITEM_K_MAC_FRAME_CT			0x2047
+#define PI_ITEM_K_MAC_COPIED_CT			0x2048
+#define PI_ITEM_K_MAC_TRANSMIT_CT		0x2049
+#define PI_ITEM_K_MAC_ERROR_CT			0x2051
+#define PI_ITEM_K_MAC_LOST_CT			0x2052
+
+#define PI_GRP_K_MAC_FRM_ERR_COND		0x205A
+#define PI_ITEM_K_MAC_FRM_ERR_THR		0x205F
+#define PI_ITEM_K_MAC_FRM_ERR_RAT		0x2060
+
+#define PI_GRP_K_MAC_STATUS				0x206E
+#define PI_ITEM_K_MAC_RMT_STATE			0x206F
+#define PI_ITEM_K_MAC_DA_FLAG			0x2070
+#define PI_ITEM_K_MAC_UNDA_FLAG			0x2071
+#define PI_ITEM_K_MAC_FRM_ERR_FLAG		0x2072
+#define PI_ITEM_K_MAC_MA_UNIT_AVAIL		0x2074
+#define PI_ITEM_K_MAC_HW_PRESENT		0x2075
+#define PI_ITEM_K_MAC_MA_UNIT_ENAB		0x2076
+
+#define PI_GRP_K_PATH_CONFIG			0x320A
+#define PI_ITEM_K_PATH_INDEX			0x320B
+#define PI_ITEM_K_PATH_CONFIGURATION 	0x3212
+#define PI_ITEM_K_PATH_TVX_LB			0x3215
+#define PI_ITEM_K_PATH_T_MAX_LB			0x3216
+#define PI_ITEM_K_PATH_MAX_T_REQ		0x3217
+
+#define PI_GRP_K_PORT_CONFIG			0x400A
+#define PI_ITEM_K_PORT_MY_TYPE			0x400C
+#define PI_ITEM_K_PORT_NBR_TYPE			0x400D
+#define PI_ITEM_K_PORT_CONN_POLS		0x400E
+#define PI_ITEM_K_PORT_MAC_INDICATED  	0x400F
+#define PI_ITEM_K_PORT_CURRENT_PATH		0x4010
+#define PI_ITEM_K_PORT_REQ_PATHS		0x4011
+#define PI_ITEM_K_PORT_MAC_PLACEMENT 	0x4012
+#define PI_ITEM_K_PORT_AVAIL_PATHS		0x4013
+#define PI_ITEM_K_PORT_PMD_CLASS		0x4016
+#define PI_ITEM_K_PORT_CONN_CAPS		0x4017
+#define PI_ITEM_K_PORT_INDEX			0x401D
+
+#define PI_GRP_K_PORT_OPERATION			0x401E
+#define PI_ITEM_K_PORT_BS_FLAG		 	0x4021
+
+#define PI_GRP_K_PORT_ERR_CNTRS			0x4028
+#define PI_ITEM_K_PORT_LCT_FAIL_CT	 	0x402A
+
+#define PI_GRP_K_PORT_LER			  	0x4032
+#define PI_ITEM_K_PORT_LER_ESTIMATE		0x4033
+#define PI_ITEM_K_PORT_LEM_REJ_CT		0x4034
+#define PI_ITEM_K_PORT_LEM_CT			0x4035
+#define PI_ITEM_K_PORT_LER_CUTOFF		0x403A
+#define PI_ITEM_K_PORT_LER_ALARM		0x403B
+
+#define PI_GRP_K_PORT_STATUS			0x403C
+#define PI_ITEM_K_PORT_CONNECT_STATE	0x403D
+#define PI_ITEM_K_PORT_PCM_STATE		0x403E
+#define PI_ITEM_K_PORT_PC_WITHHOLD		0x403F
+#define PI_ITEM_K_PORT_LER_FLAG			0x4040
+#define PI_ITEM_K_PORT_HW_PRESENT		0x4041
+
+#define PI_ITEM_K_PORT_ACT				0x4046
+
+/* Addr_Filter_Set Request */
+
+#define PI_CMD_ADDR_FILTER_K_SIZE   62
+
+typedef struct
+	{
+	PI_UINT32	cmd_type;
+	PI_LAN_ADDR	entry[PI_CMD_ADDR_FILTER_K_SIZE];
+	} PI_CMD_ADDR_FILTER_SET_REQ;
+
+/* Addr_Filter_Set Response */
+
+typedef struct
+	{
+	PI_RSP_HEADER   header;
+	} PI_CMD_ADDR_FILTER_SET_RSP;
+
+/* Addr_Filter_Get Request */
+
+typedef struct
+	{
+	PI_UINT32	cmd_type;
+	} PI_CMD_ADDR_FILTER_GET_REQ;
+
+/* Addr_Filter_Get Response */
+
+typedef struct
+	{
+	PI_RSP_HEADER   header;
+	PI_LAN_ADDR		entry[PI_CMD_ADDR_FILTER_K_SIZE];
+	} PI_CMD_ADDR_FILTER_GET_RSP;
+
+/* Status_Chars_Get Request */
+
+typedef struct
+	{
+	PI_UINT32  cmd_type;
+	} PI_CMD_STATUS_CHARS_GET_REQ;
+
+/* Status_Chars_Get Response */
+
+typedef struct
+	{
+	PI_RSP_HEADER   header;
+	PI_STATION_ID   station_id;						/* Station */
+	PI_UINT32		station_type;
+	PI_UINT32		smt_ver_id;
+	PI_UINT32		smt_ver_id_max;
+	PI_UINT32		smt_ver_id_min;
+	PI_UINT32		station_state;
+	PI_LAN_ADDR		link_addr;						/* Link */
+	PI_UINT32		t_req;
+	PI_UINT32		tvx;
+	PI_UINT32		token_timeout;
+	PI_UINT32		purger_enb;
+	PI_UINT32		link_state;
+	PI_UINT32		tneg;
+	PI_UINT32		dup_addr_flag;
+	PI_LAN_ADDR		una;
+	PI_LAN_ADDR		una_old;
+	PI_UINT32		un_dup_addr_flag;
+	PI_LAN_ADDR		dna;
+	PI_LAN_ADDR		dna_old;
+	PI_UINT32		purger_state;
+	PI_UINT32		fci_mode;
+	PI_UINT32		error_reason;
+	PI_UINT32		loopback;
+	PI_UINT32		ring_latency;
+	PI_LAN_ADDR		last_dir_beacon_sa;
+	PI_LAN_ADDR		last_dir_beacon_una;
+	PI_UINT32		phy_type[PI_PHY_K_MAX];			/* Phy */
+	PI_UINT32		pmd_type[PI_PHY_K_MAX];
+	PI_UINT32		lem_threshold[PI_PHY_K_MAX];
+	PI_UINT32		phy_state[PI_PHY_K_MAX];
+	PI_UINT32		nbor_phy_type[PI_PHY_K_MAX];
+	PI_UINT32		link_error_est[PI_PHY_K_MAX];
+	PI_UINT32		broken_reason[PI_PHY_K_MAX];
+	PI_UINT32		reject_reason[PI_PHY_K_MAX];
+	PI_UINT32		cntr_interval;					/* Miscellaneous */
+	PI_UINT32		module_rev;
+	PI_UINT32		firmware_rev;
+	PI_UINT32		mop_device_type;
+	PI_UINT32		phy_led[PI_PHY_K_MAX];
+	PI_UINT32		flush_time;
+	} PI_CMD_STATUS_CHARS_GET_RSP;
+
+/* FDDI_MIB_Get Request */
+
+typedef struct
+	{
+	PI_UINT32  cmd_type;
+	} PI_CMD_FDDI_MIB_GET_REQ;
+
+/* FDDI_MIB_Get Response */
+
+typedef struct
+	{
+	PI_RSP_HEADER   header;
+
+	/* SMT GROUP */
+
+	PI_STATION_ID   smt_station_id;
+	PI_UINT32		smt_op_version_id;
+	PI_UINT32		smt_hi_version_id;
+	PI_UINT32		smt_lo_version_id;
+	PI_UINT32		smt_mac_ct;
+	PI_UINT32		smt_non_master_ct;
+	PI_UINT32		smt_master_ct;
+	PI_UINT32		smt_paths_available;
+	PI_UINT32		smt_config_capabilities;
+	PI_UINT32		smt_config_policy;
+	PI_UINT32		smt_connection_policy;
+	PI_UINT32		smt_t_notify;
+	PI_UINT32		smt_status_reporting;
+	PI_UINT32		smt_ecm_state;
+	PI_UINT32		smt_cf_state;
+	PI_UINT32		smt_hold_state;
+	PI_UINT32		smt_remote_disconnect_flag;
+	PI_UINT32		smt_station_action;
+
+	/* MAC GROUP */
+
+	PI_UINT32		mac_frame_status_capabilities;
+	PI_UINT32		mac_t_max_greatest_lower_bound;
+	PI_UINT32		mac_tvx_greatest_lower_bound;
+	PI_UINT32		mac_paths_available;
+	PI_UINT32		mac_current_path;
+	PI_LAN_ADDR		mac_upstream_nbr;
+	PI_LAN_ADDR		mac_old_upstream_nbr;
+	PI_UINT32		mac_dup_addr_test;
+	PI_UINT32		mac_paths_requested;
+	PI_UINT32		mac_downstream_port_type;
+	PI_LAN_ADDR		mac_smt_address;
+	PI_UINT32		mac_t_req;
+	PI_UINT32		mac_t_neg;
+	PI_UINT32		mac_t_max;
+	PI_UINT32		mac_tvx_value;
+	PI_UINT32		mac_t_min;
+	PI_UINT32		mac_current_frame_status;
+	/*			  	mac_frame_cts 			*/
+	/* 				mac_error_cts 			*/
+	/* 		   		mac_lost_cts 			*/
+	PI_UINT32		mac_frame_error_threshold;
+	PI_UINT32		mac_frame_error_ratio;
+	PI_UINT32		mac_rmt_state;
+	PI_UINT32		mac_da_flag;
+	PI_UINT32		mac_una_da_flag;
+	PI_UINT32		mac_frame_condition;
+	PI_UINT32		mac_chip_set;
+	PI_UINT32		mac_action;
+
+	/* PATH GROUP => Does not need to be implemented */
+
+	/* PORT GROUP */
+
+	PI_UINT32		port_pc_type[PI_PHY_K_MAX];
+	PI_UINT32		port_pc_neighbor[PI_PHY_K_MAX];
+	PI_UINT32		port_connection_policies[PI_PHY_K_MAX];
+	PI_UINT32		port_remote_mac_indicated[PI_PHY_K_MAX];
+	PI_UINT32		port_ce_state[PI_PHY_K_MAX];
+	PI_UINT32		port_paths_requested[PI_PHY_K_MAX];
+	PI_UINT32		port_mac_placement[PI_PHY_K_MAX];
+	PI_UINT32		port_available_paths[PI_PHY_K_MAX];
+	PI_UINT32		port_mac_loop_time[PI_PHY_K_MAX];
+	PI_UINT32		port_tb_max[PI_PHY_K_MAX];
+	PI_UINT32		port_bs_flag[PI_PHY_K_MAX];
+	/*				port_lct_fail_cts[PI_PHY_K_MAX];	*/
+	PI_UINT32		port_ler_estimate[PI_PHY_K_MAX];
+	/*				port_lem_reject_cts[PI_PHY_K_MAX];	*/
+	/*				port_lem_cts[PI_PHY_K_MAX];		*/
+	PI_UINT32		port_ler_cutoff[PI_PHY_K_MAX];
+	PI_UINT32		port_ler_alarm[PI_PHY_K_MAX];
+	PI_UINT32		port_connect_state[PI_PHY_K_MAX];
+	PI_UINT32		port_pcm_state[PI_PHY_K_MAX];
+	PI_UINT32		port_pc_withhold[PI_PHY_K_MAX];
+	PI_UINT32		port_ler_condition[PI_PHY_K_MAX];
+	PI_UINT32		port_chip_set[PI_PHY_K_MAX];
+	PI_UINT32		port_action[PI_PHY_K_MAX];
+
+	/* ATTACHMENT GROUP */
+
+	PI_UINT32		attachment_class;
+	PI_UINT32		attachment_ob_present;
+	PI_UINT32		attachment_imax_expiration;
+	PI_UINT32		attachment_inserted_status;
+	PI_UINT32		attachment_insert_policy;
+
+	/* CHIP SET GROUP => Does not need to be implemented */
+
+	} PI_CMD_FDDI_MIB_GET_RSP;
+
+/* DEC_Ext_MIB_Get Request */
+
+typedef struct
+	{
+	PI_UINT32  cmd_type;
+	} PI_CMD_DEC_EXT_MIB_GET_REQ;
+
+/* DEC_Ext_MIB_Get (efddi and efdx groups only) Response */
+
+typedef struct
+	{
+	PI_RSP_HEADER   header;
+
+	/* SMT GROUP */
+
+	PI_UINT32		esmt_station_type;
+
+	/* MAC GROUP */
+
+	PI_UINT32		emac_link_state;
+	PI_UINT32		emac_ring_purger_state;
+	PI_UINT32		emac_ring_purger_enable;
+	PI_UINT32		emac_frame_strip_mode;
+	PI_UINT32		emac_ring_error_reason;
+	PI_UINT32		emac_up_nbr_dup_addr_flag;
+	PI_UINT32		emac_restricted_token_timeout;
+
+	/* PORT GROUP */
+
+	PI_UINT32		eport_pmd_type[PI_PHY_K_MAX];
+	PI_UINT32		eport_phy_state[PI_PHY_K_MAX];
+	PI_UINT32		eport_reject_reason[PI_PHY_K_MAX];
+
+	/* FDX (Full-Duplex) GROUP */
+
+	PI_UINT32		efdx_enable;				/* Valid only in SMT 7.3 */
+	PI_UINT32		efdx_op;					/* Valid only in SMT 7.3 */
+	PI_UINT32		efdx_state;					/* Valid only in SMT 7.3 */
+
+	} PI_CMD_DEC_EXT_MIB_GET_RSP;
+
+typedef struct
+	{
+	PI_CNTR		traces_rcvd;					/* Station */
+	PI_CNTR		frame_cnt;						/* Link */
+	PI_CNTR		error_cnt;
+	PI_CNTR		lost_cnt;
+	PI_CNTR		octets_rcvd;
+	PI_CNTR		octets_sent;
+	PI_CNTR		pdus_rcvd;
+	PI_CNTR		pdus_sent;
+	PI_CNTR		mcast_octets_rcvd;
+	PI_CNTR		mcast_octets_sent;
+	PI_CNTR		mcast_pdus_rcvd;
+	PI_CNTR		mcast_pdus_sent;
+	PI_CNTR		xmt_underruns;
+	PI_CNTR		xmt_failures;
+	PI_CNTR		block_check_errors;
+	PI_CNTR		frame_status_errors;
+	PI_CNTR		pdu_length_errors;
+	PI_CNTR		rcv_overruns;
+	PI_CNTR		user_buff_unavailable;
+	PI_CNTR		inits_initiated;
+	PI_CNTR		inits_rcvd;
+	PI_CNTR		beacons_initiated;
+	PI_CNTR		dup_addrs;
+	PI_CNTR		dup_tokens;
+	PI_CNTR		purge_errors;
+	PI_CNTR		fci_strip_errors;
+	PI_CNTR		traces_initiated;
+	PI_CNTR		directed_beacons_rcvd;
+	PI_CNTR		emac_frame_alignment_errors;
+	PI_CNTR		ebuff_errors[PI_PHY_K_MAX];		/* Phy */
+	PI_CNTR		lct_rejects[PI_PHY_K_MAX];
+	PI_CNTR		lem_rejects[PI_PHY_K_MAX];
+	PI_CNTR		link_errors[PI_PHY_K_MAX];
+	PI_CNTR		connections[PI_PHY_K_MAX];
+	PI_CNTR		copied_cnt;			 			/* Valid only if using SMT 7.3 */
+	PI_CNTR		transmit_cnt;					/* Valid only if using SMT 7.3 */
+	PI_CNTR		tokens;
+	} PI_CNTR_BLK;
+
+/* Counters_Get Request */
+
+typedef struct
+	{
+	PI_UINT32  cmd_type;
+	} PI_CMD_CNTRS_GET_REQ;
+
+/* Counters_Get Response */
+
+typedef struct
+	{
+	PI_RSP_HEADER   header;
+	PI_CNTR		time_since_reset;
+	PI_CNTR_BLK		cntrs;
+	} PI_CMD_CNTRS_GET_RSP;
+
+/* Counters_Set Request */
+
+typedef struct
+	{
+	PI_UINT32	cmd_type;
+	PI_CNTR_BLK	cntrs;
+	} PI_CMD_CNTRS_SET_REQ;
+
+/* Counters_Set Response */
+
+typedef struct
+	{
+	PI_RSP_HEADER   header;
+	} PI_CMD_CNTRS_SET_RSP;
+
+/* Error_Log_Clear Request */
+
+typedef struct
+	{
+	PI_UINT32  cmd_type;
+	} PI_CMD_ERROR_LOG_CLEAR_REQ;
+
+/* Error_Log_Clear Response */
+
+typedef struct
+	{
+	PI_RSP_HEADER   header;
+	} PI_CMD_ERROR_LOG_CLEAR_RSP;
+
+/* Error_Log_Get Request */
+
+#define PI_LOG_ENTRY_K_INDEX_MIN	0		/* Minimum index for entry */
+
+typedef struct
+	{
+	PI_UINT32  cmd_type;
+	PI_UINT32  entry_index;
+	} PI_CMD_ERROR_LOG_GET_REQ;
+
+/* Error_Log_Get Response */
+
+#define PI_K_LOG_FW_SIZE			111		/* Max number of fw longwords */
+#define PI_K_LOG_DIAG_SIZE	 		6		/* Max number of diag longwords */
+
+typedef struct
+	{
+	struct
+		{
+		PI_UINT32	fru_imp_mask;
+		PI_UINT32	test_id;
+		PI_UINT32	reserved[PI_K_LOG_DIAG_SIZE];
+		} diag;
+	PI_UINT32		fw[PI_K_LOG_FW_SIZE];
+	} PI_LOG_ENTRY;
+
+typedef struct
+	{
+	PI_RSP_HEADER   header;
+	PI_UINT32		event_status;
+	PI_UINT32		caller_id;
+	PI_UINT32		timestamp_l;
+	PI_UINT32		timestamp_h;
+	PI_UINT32		write_count;
+	PI_LOG_ENTRY	entry_info;
+	} PI_CMD_ERROR_LOG_GET_RSP;
+
+/* Define error log related constants and types.					*/
+/*   Not all of the caller id's can occur.  The only ones currently */
+/*   implemented are: none, selftest, mfg, fw, console				*/
+
+#define PI_LOG_EVENT_STATUS_K_VALID		0	/* Valid Event Status 		*/
+#define PI_LOG_EVENT_STATUS_K_INVALID	1	/* Invalid Event Status 	*/
+#define PI_LOG_CALLER_ID_K_NONE		 	0	/* No caller 				*/
+#define PI_LOG_CALLER_ID_K_SELFTEST	 	1	/* Normal power-up selftest */
+#define PI_LOG_CALLER_ID_K_MFG		 	2	/* Mfg power-up selftest 	*/
+#define PI_LOG_CALLER_ID_K_ONLINE		3	/* On-line diagnostics 		*/
+#define PI_LOG_CALLER_ID_K_HW			4	/* Hardware 				*/
+#define PI_LOG_CALLER_ID_K_FW			5	/* Firmware 				*/
+#define PI_LOG_CALLER_ID_K_CNS_HW		6	/* CNS firmware 			*/
+#define PI_LOG_CALLER_ID_K_CNS_FW		7	/* CNS hardware 			*/
+#define PI_LOG_CALLER_ID_K_CONSOLE	 	8   /* Console Caller Id 		*/
+
+/*
+ *  Place all DMA commands in the following request and response structures
+ *  to simplify code.
+ */
+
+typedef union
+	{
+	PI_UINT32					cmd_type;
+	PI_CMD_START_REQ			start;
+	PI_CMD_FILTERS_SET_REQ		filter_set;
+	PI_CMD_FILTERS_GET_REQ		filter_get;
+	PI_CMD_CHARS_SET_REQ		char_set;
+	PI_CMD_ADDR_FILTER_SET_REQ	addr_filter_set;
+	PI_CMD_ADDR_FILTER_GET_REQ	addr_filter_get;
+	PI_CMD_STATUS_CHARS_GET_REQ	stat_char_get;
+	PI_CMD_CNTRS_GET_REQ		cntrs_get;
+	PI_CMD_CNTRS_SET_REQ		cntrs_set;
+	PI_CMD_ERROR_LOG_CLEAR_REQ	error_log_clear;
+	PI_CMD_ERROR_LOG_GET_REQ	error_log_read;
+	PI_CMD_SNMP_SET_REQ			snmp_set;
+	PI_CMD_FDDI_MIB_GET_REQ		fddi_mib_get;
+	PI_CMD_DEC_EXT_MIB_GET_REQ	dec_mib_get;
+	PI_CMD_SMT_MIB_SET_REQ		smt_mib_set;
+	PI_CMD_SMT_MIB_GET_REQ		smt_mib_get;
+	char						pad[PI_CMD_REQ_K_SIZE_MAX];
+	} PI_DMA_CMD_REQ;
+
+typedef union
+	{
+	PI_RSP_HEADER				header;
+	PI_CMD_START_RSP			start;
+	PI_CMD_FILTERS_SET_RSP		filter_set;
+	PI_CMD_FILTERS_GET_RSP		filter_get;
+	PI_CMD_CHARS_SET_RSP		char_set;
+	PI_CMD_ADDR_FILTER_SET_RSP	addr_filter_set;
+	PI_CMD_ADDR_FILTER_GET_RSP	addr_filter_get;
+	PI_CMD_STATUS_CHARS_GET_RSP	stat_char_get;
+	PI_CMD_CNTRS_GET_RSP		cntrs_get;
+	PI_CMD_CNTRS_SET_RSP		cntrs_set;
+	PI_CMD_ERROR_LOG_CLEAR_RSP	error_log_clear;
+	PI_CMD_ERROR_LOG_GET_RSP	error_log_get;
+	PI_CMD_SNMP_SET_RSP			snmp_set;
+	PI_CMD_FDDI_MIB_GET_RSP		fddi_mib_get;
+	PI_CMD_DEC_EXT_MIB_GET_RSP	dec_mib_get;
+	PI_CMD_SMT_MIB_SET_RSP		smt_mib_set;
+	PI_CMD_SMT_MIB_GET_RSP		smt_mib_get;
+	char						pad[PI_CMD_RSP_K_SIZE_MAX];
+	} PI_DMA_CMD_RSP;
+
+typedef union
+	{
+	PI_DMA_CMD_REQ	request;
+	PI_DMA_CMD_RSP	response;
+	} PI_DMA_CMD_BUFFER;
+
+
+/* Define format of Consumer Block (resident in host memory) */
+
+typedef struct
+	{
+	volatile PI_UINT32	xmt_rcv_data;
+	volatile PI_UINT32	reserved_1;
+	volatile PI_UINT32	smt_host;
+	volatile PI_UINT32	reserved_2;
+	volatile PI_UINT32	unsol;
+	volatile PI_UINT32	reserved_3;
+	volatile PI_UINT32	cmd_rsp;
+	volatile PI_UINT32	reserved_4;
+	volatile PI_UINT32	cmd_req;
+	volatile PI_UINT32	reserved_5;
+	} PI_CONSUMER_BLOCK;
+
+#define PI_CONS_M_RCV_INDEX			0x000000FF
+#define PI_CONS_M_XMT_INDEX			0x00FF0000
+#define PI_CONS_V_RCV_INDEX			0
+#define PI_CONS_V_XMT_INDEX			16
+
+/* Offsets into consumer block */
+
+#define PI_CONS_BLK_K_XMT_RCV		0x00
+#define PI_CONS_BLK_K_SMT_HOST		0x08
+#define PI_CONS_BLK_K_UNSOL			0x10
+#define PI_CONS_BLK_K_CMD_RSP		0x18
+#define PI_CONS_BLK_K_CMD_REQ		0x20
+
+/* Offsets into descriptor block */
+
+#define PI_DESCR_BLK_K_RCV_DATA		0x0000
+#define PI_DESCR_BLK_K_XMT_DATA		0x0800
+#define PI_DESCR_BLK_K_SMT_HOST 	0x1000
+#define PI_DESCR_BLK_K_UNSOL		0x1200
+#define PI_DESCR_BLK_K_CMD_RSP		0x1280
+#define PI_DESCR_BLK_K_CMD_REQ		0x1300
+
+/* Define format of a rcv descr (Rcv Data, Cmd Rsp, Unsolicited, SMT Host)   */
+/*   Note a field has been added for later versions of the PDQ to allow for  */
+/*   finer granularity of the rcv buffer alignment.  For backwards		 	 */
+/*   compatibility, the two bits (which allow the rcv buffer to be longword  */
+/*   aligned) have been added at the MBZ bits.  To support previous drivers, */
+/*   the MBZ definition is left intact.									  	 */
+
+typedef struct
+	{
+	PI_UINT32	long_0;
+	PI_UINT32	long_1;
+	} PI_RCV_DESCR;
+
+#define	PI_RCV_DESCR_M_SOP	  		0x80000000
+#define PI_RCV_DESCR_M_SEG_LEN_LO 	0x60000000
+#define PI_RCV_DESCR_M_MBZ	  		0x60000000
+#define PI_RCV_DESCR_M_SEG_LEN		0x1F800000
+#define PI_RCV_DESCR_M_SEG_LEN_HI	0x1FF00000
+#define PI_RCV_DESCR_M_SEG_CNT	  	0x000F0000
+#define PI_RCV_DESCR_M_BUFF_HI	  	0x0000FFFF
+
+#define	PI_RCV_DESCR_V_SOP	  		31
+#define PI_RCV_DESCR_V_SEG_LEN_LO 	29
+#define PI_RCV_DESCR_V_MBZ	  		29
+#define PI_RCV_DESCR_V_SEG_LEN	  	23
+#define PI_RCV_DESCR_V_SEG_LEN_HI 	20
+#define PI_RCV_DESCR_V_SEG_CNT	  	16
+#define PI_RCV_DESCR_V_BUFF_HI	 	0
+
+/* Define the format of a transmit descriptor (Xmt Data, Cmd Req) */
+
+typedef struct
+	{
+	PI_UINT32	long_0;
+	PI_UINT32	long_1;
+	} PI_XMT_DESCR;
+
+#define	PI_XMT_DESCR_M_SOP			0x80000000
+#define PI_XMT_DESCR_M_EOP			0x40000000
+#define PI_XMT_DESCR_M_MBZ			0x20000000
+#define PI_XMT_DESCR_M_SEG_LEN		0x1FFF0000
+#define PI_XMT_DESCR_M_BUFF_HI		0x0000FFFF
+
+#define	PI_XMT_DESCR_V_SOP			31
+#define	PI_XMT_DESCR_V_EOP			30
+#define PI_XMT_DESCR_V_MBZ			29
+#define PI_XMT_DESCR_V_SEG_LEN		16
+#define PI_XMT_DESCR_V_BUFF_HI		0
+
+/* Define format of the Descriptor Block (resident in host memory) */
+
+#define PI_RCV_DATA_K_NUM_ENTRIES			256
+#define PI_XMT_DATA_K_NUM_ENTRIES			256
+#define PI_SMT_HOST_K_NUM_ENTRIES			64
+#define PI_UNSOL_K_NUM_ENTRIES				16
+#define PI_CMD_RSP_K_NUM_ENTRIES			16
+#define PI_CMD_REQ_K_NUM_ENTRIES			16
+
+typedef struct
+	{
+	PI_RCV_DESCR  rcv_data[PI_RCV_DATA_K_NUM_ENTRIES];
+	PI_XMT_DESCR  xmt_data[PI_XMT_DATA_K_NUM_ENTRIES];
+	PI_RCV_DESCR  smt_host[PI_SMT_HOST_K_NUM_ENTRIES];
+	PI_RCV_DESCR  unsol[PI_UNSOL_K_NUM_ENTRIES];
+	PI_RCV_DESCR  cmd_rsp[PI_CMD_RSP_K_NUM_ENTRIES];
+	PI_XMT_DESCR  cmd_req[PI_CMD_REQ_K_NUM_ENTRIES];
+	} PI_DESCR_BLOCK;
+
+/* Define Port Registers - offsets from PDQ Base address */
+
+#define PI_PDQ_K_REG_PORT_RESET			0x00000000
+#define PI_PDQ_K_REG_HOST_DATA			0x00000004
+#define PI_PDQ_K_REG_PORT_CTRL			0x00000008
+#define PI_PDQ_K_REG_PORT_DATA_A		0x0000000C
+#define PI_PDQ_K_REG_PORT_DATA_B		0x00000010
+#define PI_PDQ_K_REG_PORT_STATUS		0x00000014
+#define PI_PDQ_K_REG_TYPE_0_STATUS 		0x00000018
+#define PI_PDQ_K_REG_HOST_INT_ENB	  	0x0000001C
+#define PI_PDQ_K_REG_TYPE_2_PROD_NOINT 	0x00000020
+#define PI_PDQ_K_REG_TYPE_2_PROD		0x00000024
+#define PI_PDQ_K_REG_CMD_RSP_PROD		0x00000028
+#define PI_PDQ_K_REG_CMD_REQ_PROD		0x0000002C
+#define PI_PDQ_K_REG_SMT_HOST_PROD   	0x00000030
+#define PI_PDQ_K_REG_UNSOL_PROD			0x00000034
+
+/* Port Control Register - Command codes for primary commands */
+
+#define PI_PCTRL_M_CMD_ERROR			0x8000
+#define PI_PCTRL_M_BLAST_FLASH			0x4000
+#define PI_PCTRL_M_HALT					0x2000
+#define PI_PCTRL_M_COPY_DATA			0x1000
+#define PI_PCTRL_M_ERROR_LOG_START		0x0800
+#define PI_PCTRL_M_ERROR_LOG_READ		0x0400
+#define PI_PCTRL_M_XMT_DATA_FLUSH_DONE	0x0200
+#define PI_PCTRL_M_INIT					0x0100
+#define PI_PCTRL_M_INIT_START		    0x0080
+#define PI_PCTRL_M_CONS_BLOCK			0x0040
+#define PI_PCTRL_M_UNINIT				0x0020
+#define PI_PCTRL_M_RING_MEMBER			0x0010
+#define PI_PCTRL_M_MLA					0x0008
+#define PI_PCTRL_M_FW_REV_READ			0x0004
+#define PI_PCTRL_M_DEV_SPECIFIC			0x0002
+#define PI_PCTRL_M_SUB_CMD				0x0001
+
+/* Define sub-commands accessed via the PI_PCTRL_M_SUB_CMD command */
+
+#define PI_SUB_CMD_K_LINK_UNINIT		0x0001
+#define PI_SUB_CMD_K_BURST_SIZE_SET		0x0002
+#define PI_SUB_CMD_K_PDQ_REV_GET		0x0004
+#define PI_SUB_CMD_K_HW_REV_GET			0x0008
+
+/* Define some Port Data B values */
+
+#define PI_PDATA_B_DMA_BURST_SIZE_4	 	0		/* valid values for command */
+#define PI_PDATA_B_DMA_BURST_SIZE_8	 	1
+#define PI_PDATA_B_DMA_BURST_SIZE_16	2
+#define PI_PDATA_B_DMA_BURST_SIZE_32	3		/* not supported on PCI */
+#define PI_PDATA_B_DMA_BURST_SIZE_DEF	PI_PDATA_B_DMA_BURST_SIZE_16
+
+/* Port Data A Reset state */
+
+#define PI_PDATA_A_RESET_M_UPGRADE		0x00000001
+#define PI_PDATA_A_RESET_M_SOFT_RESET	0x00000002
+#define PI_PDATA_A_RESET_M_SKIP_ST		0x00000004
+
+/* Read adapter MLA address port control command constants */
+
+#define PI_PDATA_A_MLA_K_LO				0
+#define PI_PDATA_A_MLA_K_HI				1
+
+/* Byte Swap values for init command */
+
+#define PI_PDATA_A_INIT_M_DESC_BLK_ADDR			0x0FFFFE000
+#define PI_PDATA_A_INIT_M_RESERVED				0x000001FFC
+#define PI_PDATA_A_INIT_M_BSWAP_DATA			0x000000002
+#define PI_PDATA_A_INIT_M_BSWAP_LITERAL			0x000000001
+
+#define PI_PDATA_A_INIT_V_DESC_BLK_ADDR			13
+#define PI_PDATA_A_INIT_V_RESERVED				3
+#define PI_PDATA_A_INIT_V_BSWAP_DATA			1
+#define PI_PDATA_A_INIT_V_BSWAP_LITERAL			0
+
+/* Port Reset Register */
+
+#define PI_RESET_M_ASSERT_RESET			1
+
+/* Port Status register */
+
+#define PI_PSTATUS_V_RCV_DATA_PENDING	31
+#define PI_PSTATUS_V_XMT_DATA_PENDING	30
+#define PI_PSTATUS_V_SMT_HOST_PENDING	29
+#define PI_PSTATUS_V_UNSOL_PENDING		28
+#define PI_PSTATUS_V_CMD_RSP_PENDING	27
+#define PI_PSTATUS_V_CMD_REQ_PENDING	26
+#define PI_PSTATUS_V_TYPE_0_PENDING		25
+#define PI_PSTATUS_V_RESERVED_1			16
+#define PI_PSTATUS_V_RESERVED_2			11
+#define PI_PSTATUS_V_STATE				8
+#define PI_PSTATUS_V_HALT_ID			0
+
+#define PI_PSTATUS_M_RCV_DATA_PENDING	0x80000000
+#define PI_PSTATUS_M_XMT_DATA_PENDING	0x40000000
+#define PI_PSTATUS_M_SMT_HOST_PENDING	0x20000000
+#define PI_PSTATUS_M_UNSOL_PENDING		0x10000000
+#define PI_PSTATUS_M_CMD_RSP_PENDING	0x08000000
+#define PI_PSTATUS_M_CMD_REQ_PENDING	0x04000000
+#define PI_PSTATUS_M_TYPE_0_PENDING		0x02000000
+#define PI_PSTATUS_M_RESERVED_1			0x01FF0000
+#define PI_PSTATUS_M_RESERVED_2			0x0000F800
+#define PI_PSTATUS_M_STATE				0x00000700
+#define PI_PSTATUS_M_HALT_ID			0x000000FF
+
+/* Define Halt Id's			 					*/
+/*   Do not insert into this list, only append. */
+
+#define PI_HALT_ID_K_SELFTEST_TIMEOUT	0
+#define PI_HALT_ID_K_PARITY_ERROR		1
+#define PI_HALT_ID_K_HOST_DIR_HALT		2
+#define PI_HALT_ID_K_SW_FAULT			3
+#define PI_HALT_ID_K_HW_FAULT			4
+#define PI_HALT_ID_K_PC_TRACE			5
+#define PI_HALT_ID_K_DMA_ERROR			6			/* Host Data has error reg */
+#define PI_HALT_ID_K_IMAGE_CRC_ERROR	7   		/* Image is bad, update it */
+#define PI_HALT_ID_K_BUS_EXCEPTION	 	8   		/* 68K bus exception	   */
+
+/* Host Interrupt Enable Register as seen by host */
+
+#define PI_HOST_INT_M_XMT_DATA_ENB		0x80000000	/* Type 2 Enables */
+#define PI_HOST_INT_M_RCV_DATA_ENB		0x40000000
+#define PI_HOST_INT_M_SMT_HOST_ENB		0x10000000	/* Type 1 Enables */
+#define PI_HOST_INT_M_UNSOL_ENB			0x20000000
+#define PI_HOST_INT_M_CMD_RSP_ENB		0x08000000
+#define PI_HOST_INT_M_CMD_REQ_ENB		0x04000000
+#define	PI_HOST_INT_M_TYPE_1_RESERVED	0x00FF0000
+#define	PI_HOST_INT_M_TYPE_0_RESERVED	0x0000FF00	/* Type 0 Enables */
+#define PI_HOST_INT_M_1MS				0x00000080
+#define PI_HOST_INT_M_20MS				0x00000040
+#define PI_HOST_INT_M_CSR_CMD_DONE		0x00000020
+#define PI_HOST_INT_M_STATE_CHANGE		0x00000010
+#define PI_HOST_INT_M_XMT_FLUSH			0x00000008
+#define PI_HOST_INT_M_NXM				0x00000004
+#define PI_HOST_INT_M_PM_PAR_ERR		0x00000002
+#define PI_HOST_INT_M_BUS_PAR_ERR		0x00000001
+
+#define PI_HOST_INT_V_XMT_DATA_ENB		31			/* Type 2 Enables */
+#define PI_HOST_INT_V_RCV_DATA_ENB		30
+#define PI_HOST_INT_V_SMT_HOST_ENB		29			/* Type 1 Enables */
+#define PI_HOST_INT_V_UNSOL_ENB			28
+#define PI_HOST_INT_V_CMD_RSP_ENB		27
+#define PI_HOST_INT_V_CMD_REQ_ENB		26
+#define	PI_HOST_INT_V_TYPE_1_RESERVED	16
+#define	PI_HOST_INT_V_TYPE_0_RESERVED   8			/* Type 0 Enables */
+#define PI_HOST_INT_V_1MS_ENB			7
+#define PI_HOST_INT_V_20MS_ENB			6
+#define PI_HOST_INT_V_CSR_CMD_DONE_ENB	5
+#define PI_HOST_INT_V_STATE_CHANGE_ENB	4
+#define PI_HOST_INT_V_XMT_FLUSH_ENB 	3
+#define PI_HOST_INT_V_NXM_ENB			2
+#define PI_HOST_INT_V_PM_PAR_ERR_ENB	1
+#define PI_HOST_INT_V_BUS_PAR_ERR_ENB	0
+
+#define PI_HOST_INT_K_ACK_ALL_TYPE_0	0x000000FF
+#define PI_HOST_INT_K_DISABLE_ALL_INTS	0x00000000
+#define PI_HOST_INT_K_ENABLE_ALL_INTS	0xFFFFFFFF
+#define PI_HOST_INT_K_ENABLE_DEF_INTS	0xC000001F
+
+/* Type 0 Interrupt Status Register */
+
+#define PI_TYPE_0_STAT_M_1MS			0x00000080
+#define PI_TYPE_0_STAT_M_20MS			0x00000040
+#define PI_TYPE_0_STAT_M_CSR_CMD_DONE	0x00000020
+#define PI_TYPE_0_STAT_M_STATE_CHANGE	0x00000010
+#define PI_TYPE_0_STAT_M_XMT_FLUSH		0x00000008
+#define PI_TYPE_0_STAT_M_NXM			0x00000004
+#define PI_TYPE_0_STAT_M_PM_PAR_ERR		0x00000002
+#define PI_TYPE_0_STAT_M_BUS_PAR_ERR	0x00000001
+
+#define PI_TYPE_0_STAT_V_1MS			7
+#define PI_TYPE_0_STAT_V_20MS			6
+#define PI_TYPE_0_STAT_V_CSR_CMD_DONE	5
+#define PI_TYPE_0_STAT_V_STATE_CHANGE	4
+#define PI_TYPE_0_STAT_V_XMT_FLUSH		3
+#define PI_TYPE_0_STAT_V_NXM			2
+#define PI_TYPE_0_STAT_V_PM_PAR_ERR		1
+#define PI_TYPE_0_STAT_V_BUS_PAR_ERR	0
+
+/* Register definition structures are defined for both big and little endian systems */
+
+#ifndef __BIG_ENDIAN
+
+/* Little endian format of Type 1 Producer register */
+
+typedef union
+	{
+	PI_UINT32	lword;
+	struct
+		{
+		PI_UINT8	prod;
+		PI_UINT8	comp;
+		PI_UINT8	mbz_1;
+		PI_UINT8	mbz_2;
+		} index;
+	} PI_TYPE_1_PROD_REG;
+
+/* Little endian format of Type 2 Producer register */
+
+typedef union
+	{
+	PI_UINT32	lword;
+	struct
+		{
+		PI_UINT8	rcv_prod;
+		PI_UINT8	xmt_prod;
+		PI_UINT8	rcv_comp;
+		PI_UINT8	xmt_comp;
+		} index;
+	} PI_TYPE_2_PROD_REG;
+
+/* Little endian format of Type 1 Consumer Block longword */
+
+typedef union
+	{
+	PI_UINT32	lword;
+	struct
+		{
+		PI_UINT8	cons;
+		PI_UINT8	res0;
+		PI_UINT8	res1;
+		PI_UINT8	res2;
+		} index;
+	} PI_TYPE_1_CONSUMER;
+
+/* Little endian format of Type 2 Consumer Block longword */
+
+typedef union
+	{
+	PI_UINT32	lword;
+	struct
+		{
+		PI_UINT8	rcv_cons;
+		PI_UINT8	res0;
+		PI_UINT8	xmt_cons;
+		PI_UINT8	res1;
+		} index;
+	} PI_TYPE_2_CONSUMER;
+
+/* Define swapping required by DMA transfers.  */
+#define PI_PDATA_A_INIT_M_BSWAP_INIT	\
+	(PI_PDATA_A_INIT_M_BSWAP_DATA)
+
+#else /* __BIG_ENDIAN */
+
+/* Big endian format of Type 1 Producer register */
+
+typedef union
+	{
+	PI_UINT32	lword;
+	struct
+		{
+		PI_UINT8	mbz_2;
+		PI_UINT8	mbz_1;
+		PI_UINT8	comp;
+		PI_UINT8	prod;
+		} index;
+	} PI_TYPE_1_PROD_REG;
+
+/* Big endian format of Type 2 Producer register */
+
+typedef union
+	{
+	PI_UINT32	lword;
+	struct
+		{
+		PI_UINT8	xmt_comp;
+		PI_UINT8	rcv_comp;
+		PI_UINT8	xmt_prod;
+		PI_UINT8	rcv_prod;
+		} index;
+	} PI_TYPE_2_PROD_REG;
+
+/* Big endian format of Type 1 Consumer Block longword */
+
+typedef union
+	{
+	PI_UINT32	lword;
+	struct
+		{
+		PI_UINT8	res2;
+		PI_UINT8	res1;
+		PI_UINT8	res0;
+		PI_UINT8	cons;
+		} index;
+	} PI_TYPE_1_CONSUMER;
+
+/* Big endian format of Type 2 Consumer Block longword */
+
+typedef union
+	{
+	PI_UINT32	lword;
+	struct
+		{
+		PI_UINT8	res1;
+		PI_UINT8	xmt_cons;
+		PI_UINT8	res0;
+		PI_UINT8	rcv_cons;
+		} index;
+	} PI_TYPE_2_CONSUMER;
+
+/* Define swapping required by DMA transfers.  */
+#define PI_PDATA_A_INIT_M_BSWAP_INIT	\
+	(PI_PDATA_A_INIT_M_BSWAP_DATA | PI_PDATA_A_INIT_M_BSWAP_LITERAL)
+
+#endif /* __BIG_ENDIAN */
+
+/* Define TC PDQ CSR offset and length */
+
+#define PI_TC_K_CSR_OFFSET		0x100000
+#define PI_TC_K_CSR_LEN			0x40		/* 64 bytes */
+
+/* Define EISA controller register offsets */
+
+#define PI_ESIC_K_CSR_IO_LEN		0x80		/* 128 bytes */
+
+#define PI_DEFEA_K_BURST_HOLDOFF	0x040
+
+#define PI_ESIC_K_SLOT_ID            	0xC80
+#define PI_ESIC_K_SLOT_CNTRL		0xC84
+#define PI_ESIC_K_MEM_ADD_CMP_0     	0xC85
+#define PI_ESIC_K_MEM_ADD_CMP_1     	0xC86
+#define PI_ESIC_K_MEM_ADD_CMP_2     	0xC87
+#define PI_ESIC_K_MEM_ADD_HI_CMP_0  	0xC88
+#define PI_ESIC_K_MEM_ADD_HI_CMP_1  	0xC89
+#define PI_ESIC_K_MEM_ADD_HI_CMP_2  	0xC8A
+#define PI_ESIC_K_MEM_ADD_MASK_0     	0xC8B
+#define PI_ESIC_K_MEM_ADD_MASK_1     	0xC8C
+#define PI_ESIC_K_MEM_ADD_MASK_2     	0xC8D
+#define PI_ESIC_K_MEM_ADD_LO_CMP_0  	0xC8E
+#define PI_ESIC_K_MEM_ADD_LO_CMP_1  	0xC8F
+#define PI_ESIC_K_MEM_ADD_LO_CMP_2  	0xC90
+#define PI_ESIC_K_IO_ADD_CMP_0_0	0xC91
+#define PI_ESIC_K_IO_ADD_CMP_0_1	0xC92
+#define PI_ESIC_K_IO_ADD_CMP_1_0	0xC93
+#define PI_ESIC_K_IO_ADD_CMP_1_1	0xC94
+#define PI_ESIC_K_IO_ADD_CMP_2_0	0xC95
+#define PI_ESIC_K_IO_ADD_CMP_2_1	0xC96
+#define PI_ESIC_K_IO_ADD_CMP_3_0	0xC97
+#define PI_ESIC_K_IO_ADD_CMP_3_1	0xC98
+#define PI_ESIC_K_IO_ADD_MASK_0_0    	0xC99
+#define PI_ESIC_K_IO_ADD_MASK_0_1    	0xC9A
+#define PI_ESIC_K_IO_ADD_MASK_1_0    	0xC9B
+#define PI_ESIC_K_IO_ADD_MASK_1_1    	0xC9C
+#define PI_ESIC_K_IO_ADD_MASK_2_0    	0xC9D
+#define PI_ESIC_K_IO_ADD_MASK_2_1    	0xC9E
+#define PI_ESIC_K_IO_ADD_MASK_3_0    	0xC9F
+#define PI_ESIC_K_IO_ADD_MASK_3_1    	0xCA0
+#define PI_ESIC_K_MOD_CONFIG_1		0xCA1
+#define PI_ESIC_K_MOD_CONFIG_2		0xCA2
+#define PI_ESIC_K_MOD_CONFIG_3		0xCA3
+#define PI_ESIC_K_MOD_CONFIG_4		0xCA4
+#define PI_ESIC_K_MOD_CONFIG_5    	0xCA5
+#define PI_ESIC_K_MOD_CONFIG_6		0xCA6
+#define PI_ESIC_K_MOD_CONFIG_7		0xCA7
+#define PI_ESIC_K_DIP_SWITCH         	0xCA8
+#define PI_ESIC_K_IO_CONFIG_STAT_0   	0xCA9
+#define PI_ESIC_K_IO_CONFIG_STAT_1   	0xCAA
+#define PI_ESIC_K_DMA_CONFIG         	0xCAB
+#define PI_ESIC_K_INPUT_PORT         	0xCAC
+#define PI_ESIC_K_OUTPUT_PORT        	0xCAD
+#define PI_ESIC_K_FUNCTION_CNTRL	0xCAE
+
+/* Define the bits in the function control register. */
+
+#define PI_FUNCTION_CNTRL_M_IOCS0	0x01
+#define PI_FUNCTION_CNTRL_M_IOCS1	0x02
+#define PI_FUNCTION_CNTRL_M_IOCS2	0x04
+#define PI_FUNCTION_CNTRL_M_IOCS3	0x08
+#define PI_FUNCTION_CNTRL_M_MEMCS0	0x10
+#define PI_FUNCTION_CNTRL_M_MEMCS1	0x20
+#define PI_FUNCTION_CNTRL_M_DMA		0x80
+
+/* Define the bits in the slot control register. */
+
+#define PI_SLOT_CNTRL_M_RESET		0x04	/* Don't use.       */
+#define PI_SLOT_CNTRL_M_ERROR		0x02	/* Not implemented. */
+#define PI_SLOT_CNTRL_M_ENB		0x01	/* Must be set.     */
+
+/* Define the bits in the burst holdoff register. */
+
+#define PI_BURST_HOLDOFF_M_HOLDOFF	0xFC
+#define PI_BURST_HOLDOFF_M_RESERVED	0x02
+#define PI_BURST_HOLDOFF_M_MEM_MAP	0x01
+
+#define PI_BURST_HOLDOFF_V_HOLDOFF	2
+#define PI_BURST_HOLDOFF_V_RESERVED	1
+#define PI_BURST_HOLDOFF_V_MEM_MAP	0
+
+/* Define the implicit mask of the Memory Address Mask Register.  */
+
+#define PI_MEM_ADD_MASK_M		0x3ff
+
+/*
+ * Define the fields in the IO Compare registers.
+ * The driver must initialize the slot field with the slot ID shifted by the
+ * amount shown below.
+ */
+
+#define PI_IO_CMP_V_SLOT		4
+
+/* Define the fields in the Interrupt Channel Configuration and Status reg */
+
+#define PI_CONFIG_STAT_0_M_PEND			0x80
+#define PI_CONFIG_STAT_0_M_RES_1		0x40
+#define PI_CONFIG_STAT_0_M_IREQ_OUT		0x20
+#define PI_CONFIG_STAT_0_M_IREQ_IN		0x10
+#define PI_CONFIG_STAT_0_M_INT_ENB		0x08
+#define PI_CONFIG_STAT_0_M_RES_0		0x04
+#define PI_CONFIG_STAT_0_M_IRQ			0x03
+
+#define PI_CONFIG_STAT_0_V_PEND			7
+#define PI_CONFIG_STAT_0_V_RES_1		6
+#define PI_CONFIG_STAT_0_V_IREQ_OUT		5
+#define PI_CONFIG_STAT_0_V_IREQ_IN		4
+#define PI_CONFIG_STAT_0_V_INT_ENB		3
+#define PI_CONFIG_STAT_0_V_RES_0		2
+#define PI_CONFIG_STAT_0_V_IRQ			0
+
+#define PI_CONFIG_STAT_0_IRQ_K_9		0
+#define PI_CONFIG_STAT_0_IRQ_K_10		1
+#define PI_CONFIG_STAT_0_IRQ_K_11		2
+#define PI_CONFIG_STAT_0_IRQ_K_15		3
+
+/* Define DEC FDDIcontroller/EISA (DEFEA) EISA hardware ID's */
+
+#define DEFEA_PRODUCT_ID	0x0030A310		/* DEC product 300 (no rev)	*/
+#define DEFEA_PROD_ID_1		0x0130A310		/* DEC product 300, rev 1	*/
+#define DEFEA_PROD_ID_2		0x0230A310		/* DEC product 300, rev 2	*/
+#define DEFEA_PROD_ID_3		0x0330A310		/* DEC product 300, rev 3	*/
+#define DEFEA_PROD_ID_4		0x0430A310		/* DEC product 300, rev 4	*/
+
+/**********************************************/
+/* Digital PFI Specification v1.0 Definitions */
+/**********************************************/
+
+/* PCI Configuration Space Constants */
+
+#define PFI_K_LAT_TIMER_DEF			0x88	/* def max master latency timer */
+#define PFI_K_LAT_TIMER_MIN			0x20	/* min max master latency timer */
+#define PFI_K_CSR_MEM_LEN			0x80	/* 128 bytes */
+#define PFI_K_CSR_IO_LEN			0x80	/* 128 bytes */
+#define PFI_K_PKT_MEM_LEN			0x10000	/* 64K bytes */
+
+/* PFI Register Offsets (starting at PDQ Register Base Address) */
+
+#define PFI_K_REG_RESERVED_0		 0X00000038
+#define PFI_K_REG_RESERVED_1		 0X0000003C
+#define PFI_K_REG_MODE_CTRL		 0X00000040
+#define PFI_K_REG_STATUS		 0X00000044
+#define PFI_K_REG_FIFO_WRITE		 0X00000048
+#define PFI_K_REG_FIFO_READ		 0X0000004C
+
+/* PFI Mode Control Register Constants */
+
+#define PFI_MODE_M_RESERVED		 0XFFFFFFF0
+#define PFI_MODE_M_TGT_ABORT_ENB	 0X00000008
+#define PFI_MODE_M_PDQ_INT_ENB		 0X00000004
+#define PFI_MODE_M_PFI_INT_ENB		 0X00000002
+#define PFI_MODE_M_DMA_ENB		 0X00000001
+
+#define PFI_MODE_V_RESERVED		 4
+#define PFI_MODE_V_TGT_ABORT_ENB	 3
+#define PFI_MODE_V_PDQ_INT_ENB		 2
+#define PFI_MODE_V_PFI_INT_ENB		 1
+#define PFI_MODE_V_DMA_ENB		 0
+
+#define PFI_MODE_K_ALL_DISABLE		 0X00000000
+
+/* PFI Status Register Constants */
+
+#define PFI_STATUS_M_RESERVED		 0XFFFFFFC0
+#define PFI_STATUS_M_PFI_ERROR		 0X00000020		/* only valid in rev 1 or later PFI */
+#define PFI_STATUS_M_PDQ_INT		 0X00000010
+#define PFI_STATUS_M_PDQ_DMA_ABORT	 0X00000008
+#define PFI_STATUS_M_FIFO_FULL		 0X00000004
+#define PFI_STATUS_M_FIFO_EMPTY		 0X00000002
+#define PFI_STATUS_M_DMA_IN_PROGRESS	 0X00000001
+
+#define PFI_STATUS_V_RESERVED		 6
+#define PFI_STATUS_V_PFI_ERROR		 5			/* only valid in rev 1 or later PFI */
+#define PFI_STATUS_V_PDQ_INT		 4
+#define PFI_STATUS_V_PDQ_DMA_ABORT	 3
+#define PFI_STATUS_V_FIFO_FULL		 2
+#define PFI_STATUS_V_FIFO_EMPTY		 1
+#define PFI_STATUS_V_DMA_IN_PROGRESS 0
+
+#define DFX_FC_PRH2_PRH1_PRH0		0x54003820	/* Packet Request Header bytes + FC */
+#define DFX_PRH0_BYTE			0x20		/* Packet Request Header byte 0 */
+#define DFX_PRH1_BYTE			0x38		/* Packet Request Header byte 1 */
+#define DFX_PRH2_BYTE			0x00		/* Packet Request Header byte 2 */
+
+/* Driver routine status (return) codes */
+
+#define DFX_K_SUCCESS			0			/* routine succeeded */
+#define DFX_K_FAILURE			1			/* routine failed */
+#define DFX_K_OUTSTATE			2			/* bad state for command */
+#define DFX_K_HW_TIMEOUT		3			/* command timed out */
+
+/* Define LLC host receive buffer min/max/default values */
+
+#define RCV_BUFS_MIN	2					/* minimum pre-allocated receive buffers */
+#define RCV_BUFS_MAX	32					/* maximum pre-allocated receive buffers */
+#define RCV_BUFS_DEF	8					/* default pre-allocated receive buffers */
+
+/* Define offsets into FDDI LLC or SMT receive frame buffers - used when indicating frames */
+
+#define RCV_BUFF_K_DESCR	0				/* four byte FMC descriptor */
+#define RCV_BUFF_K_PADDING	4				/* three null bytes */
+#define RCV_BUFF_K_FC		7				/* one byte frame control */
+#define RCV_BUFF_K_DA		8				/* six byte destination address */
+#define RCV_BUFF_K_SA		14				/* six byte source address */
+#define RCV_BUFF_K_DATA		20				/* offset to start of packet data */
+
+/* Define offsets into FDDI LLC transmit frame buffers - used when sending frames */
+
+#define XMT_BUFF_K_FC		0				/* one byte frame control */
+#define XMT_BUFF_K_DA		1				/* six byte destination address */
+#define XMT_BUFF_K_SA		7				/* six byte source address */
+#define XMT_BUFF_K_DATA		13				/* offset to start of packet data */
+
+/* Macro for checking a "value" is within a specific range */
+
+#define IN_RANGE(value,low,high) ((value >= low) && (value <= high))
+
+/* Only execute special print call when debug driver was built */
+
+#ifdef DEFXX_DEBUG
+#define DBG_printk(args...) printk(## args)
+#else
+#define DBG_printk(args...)
+#endif
+
+/* Define constants for masking/unmasking interrupts */
+
+#define DFX_MASK_INTERRUPTS		1
+#define DFX_UNMASK_INTERRUPTS		0
+
+/* Define structure for driver transmit descriptor block */
+
+typedef struct
+	{
+	struct sk_buff	*p_skb;					/* ptr to skb */
+	} XMT_DRIVER_DESCR;
+
+typedef struct DFX_board_tag
+	{
+	/* Keep virtual and physical pointers to locked, physically contiguous memory */
+
+	char				*kmalloced;					/* pci_free_consistent this on unload */
+	dma_addr_t			kmalloced_dma;
+	/* DMA handle for the above */
+	PI_DESCR_BLOCK			*descr_block_virt;				/* PDQ descriptor block virt address */
+	dma_addr_t			descr_block_phys;				/* PDQ descriptor block phys address */
+	PI_DMA_CMD_REQ			*cmd_req_virt;					/* Command request buffer virt address */
+	dma_addr_t			cmd_req_phys;					/* Command request buffer phys address */
+	PI_DMA_CMD_RSP			*cmd_rsp_virt;					/* Command response buffer virt address */
+	dma_addr_t			cmd_rsp_phys;					/* Command response buffer phys address */
+	char				*rcv_block_virt;				/* LLC host receive queue buf blk virt */
+	dma_addr_t			rcv_block_phys;					/* LLC host receive queue buf blk phys */
+	PI_CONSUMER_BLOCK		*cons_block_virt;				/* PDQ consumer block virt address */
+	dma_addr_t			cons_block_phys;				/* PDQ consumer block phys address */
+
+	/* Keep local copies of Type 1 and Type 2 register data */
+
+	PI_TYPE_1_PROD_REG		cmd_req_reg;					/* Command Request register */
+	PI_TYPE_1_PROD_REG		cmd_rsp_reg;					/* Command Response register */
+	PI_TYPE_2_PROD_REG		rcv_xmt_reg;					/* Type 2 (RCV/XMT) register */
+
+	/* Storage for unicast and multicast address entries in adapter CAM */
+
+	u8				uc_table[1*FDDI_K_ALEN];
+	u32				uc_count;						/* number of unicast addresses */
+	u8				mc_table[PI_CMD_ADDR_FILTER_K_SIZE*FDDI_K_ALEN];
+	u32				mc_count;						/* number of multicast addresses */
+
+	/* Current packet filter settings */
+
+	u32				ind_group_prom;					/* LLC individual & group frame prom mode */
+	u32				group_prom;					/* LLC group (multicast) frame prom mode */
+
+	/* Link available flag needed to determine whether to drop outgoing packet requests */
+
+	u32				link_available;					/* is link available? */
+
+	/* Resources to indicate reset type when resetting adapter */
+
+	u32				reset_type;					/* skip or rerun diagnostics */
+
+	/* Store pointers to receive buffers for queue processing code */
+
+	char				*p_rcv_buff_va[PI_RCV_DATA_K_NUM_ENTRIES];
+
+	/* Store pointers to transmit buffers for transmit completion code */
+
+	XMT_DRIVER_DESCR		xmt_drv_descr_blk[PI_XMT_DATA_K_NUM_ENTRIES];
+
+	/* Transmit spinlocks */
+
+	spinlock_t			lock;
+
+	/* Store device, bus-specific, and parameter information for this adapter */
+
+	struct net_device		*dev;						/* pointer to device structure */
+	union {
+		void __iomem *mem;
+		int port;
+	} base;										/* base address */
+	struct device			*bus_dev;
+	u32				full_duplex_enb;				/* FDDI Full Duplex enable (1 == on, 2 == off) */
+	u32				req_ttrt;					/* requested TTRT value (in 80ns units) */
+	u32				burst_size;					/* adapter burst size (enumerated) */
+	u32				rcv_bufs_to_post;				/* receive buffers to post for LLC host queue */
+	u8				factory_mac_addr[FDDI_K_ALEN];			/* factory (on-board) MAC address */
+
+	/* Common FDDI statistics structure and private counters */
+
+	struct fddi_statistics	stats;
+
+	u32				rcv_discards;
+	u32				rcv_crc_errors;
+	u32				rcv_frame_status_errors;
+	u32				rcv_length_errors;
+	u32				rcv_total_frames;
+	u32				rcv_multicast_frames;
+	u32				rcv_total_bytes;
+
+	u32				xmt_discards;
+	u32				xmt_length_errors;
+	u32				xmt_total_frames;
+	u32				xmt_total_bytes;
+	} DFX_board_t;
+
+#endif	/* #ifndef _DEFXX_H_ */
diff --git a/drivers/net/fddi/skfp/Makefile b/drivers/net/fddi/skfp/Makefile
new file mode 100644
index 0000000..b0be023
--- /dev/null
+++ b/drivers/net/fddi/skfp/Makefile
@@ -0,0 +1,20 @@
+#
+# Makefile for the SysKonnect FDDI PCI adapter driver
+#
+
+obj-$(CONFIG_SKFP) += skfp.o
+
+skfp-objs :=  skfddi.o    hwmtm.o    fplustm.o  smt.o      cfm.o     \
+              ecm.o       pcmplc.o   pmf.o      queue.o    rmt.o     \
+	      smtdef.o    smtinit.o  smttimer.o srf.o      hwt.o     \
+	      drvfbi.o   ess.o
+
+# NOTE:
+#   Compiling this driver produces some warnings (and some more are 
+#   switched off below), but I did not fix this, because the Hardware
+#   Module source (see skfddi.c for details) is used for different
+#   drivers, and fixing it for Linux might bring problems on other
+#   projects. To keep the source common for all those drivers (and
+#   thus simplify fixes to it), please do not clean it up!
+
+ccflags-y := -Idrivers/net/skfp -DPCI -DMEM_MAPPED_IO -Wno-strict-prototypes
diff --git a/drivers/net/fddi/skfp/cfm.c b/drivers/net/fddi/skfp/cfm.c
new file mode 100644
index 0000000..e395ace
--- /dev/null
+++ b/drivers/net/fddi/skfp/cfm.c
@@ -0,0 +1,627 @@
+/******************************************************************************
+ *
+ *	(C)Copyright 1998,1999 SysKonnect,
+ *	a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ *	See the file "skfddi.c" for further information.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+	SMT CFM
+	Configuration Management
+	DAS with single MAC
+*/
+
+/*
+ *	Hardware independent state machine implemantation
+ *	The following external SMT functions are referenced :
+ *
+ *		queue_event()
+ *
+ *	The following external HW dependent functions are referenced :
+ *		config_mux()
+ *
+ *	The following HW dependent events are required :
+ *		NONE 
+ */
+
+#include "h/types.h"
+#include "h/fddi.h"
+#include "h/smc.h"
+
+#define KERNEL
+#include "h/smtstate.h"
+
+#ifndef	lint
+static const char ID_sccs[] = "@(#)cfm.c	2.18 98/10/06 (C) SK " ;
+#endif
+
+/*
+ * FSM Macros
+ */
+#define AFLAG	0x10
+#define GO_STATE(x)	(smc->mib.fddiSMTCF_State = (x)|AFLAG)
+#define ACTIONS_DONE()	(smc->mib.fddiSMTCF_State &= ~AFLAG)
+#define ACTIONS(x)	(x|AFLAG)
+
+#ifdef	DEBUG
+/*
+ * symbolic state names
+ */
+static const char * const cfm_states[] = {
+	"SC0_ISOLATED","CF1","CF2","CF3","CF4",
+	"SC1_WRAP_A","SC2_WRAP_B","SC5_TRHU_B","SC7_WRAP_S",
+	"SC9_C_WRAP_A","SC10_C_WRAP_B","SC11_C_WRAP_S","SC4_THRU_A"
+} ;
+
+/*
+ * symbolic event names
+ */
+static const char * const cfm_events[] = {
+	"NONE","CF_LOOP_A","CF_LOOP_B","CF_JOIN_A","CF_JOIN_B"
+} ;
+#endif
+
+/*
+ * map from state to downstream port type
+ */
+static const unsigned char cf_to_ptype[] = {
+	TNONE,TNONE,TNONE,TNONE,TNONE,
+	TNONE,TB,TB,TS,
+	TA,TB,TS,TB
+} ;
+
+/*
+ * CEM port states
+ */
+#define	CEM_PST_DOWN	0
+#define	CEM_PST_UP	1
+#define	CEM_PST_HOLD	2
+/* define portstate array only for A and B port */
+/* Do this within the smc structure (use in multiple cards) */
+
+/*
+ * all Globals  are defined in smc.h
+ * struct s_cfm
+ */
+
+/*
+ * function declarations
+ */
+static void cfm_fsm(struct s_smc *smc, int cmd);
+
+/*
+	init CFM state machine
+	clear all CFM vars and flags
+*/
+void cfm_init(struct s_smc *smc)
+{
+	smc->mib.fddiSMTCF_State = ACTIONS(SC0_ISOLATED) ;
+	smc->r.rm_join = 0 ;
+	smc->r.rm_loop = 0 ;
+	smc->y[PA].scrub = 0 ;
+	smc->y[PB].scrub = 0 ;
+	smc->y[PA].cem_pst = CEM_PST_DOWN ;
+	smc->y[PB].cem_pst = CEM_PST_DOWN ;
+}
+
+/* Some terms conditions used by the selection criteria */
+#define THRU_ENABLED(smc)	(smc->y[PA].pc_mode != PM_TREE && \
+				 smc->y[PB].pc_mode != PM_TREE)
+/* Selection criteria for the ports */
+static void selection_criteria (struct s_smc *smc, struct s_phy *phy)
+{
+
+	switch (phy->mib->fddiPORTMy_Type) {
+	case TA:
+		if ( !THRU_ENABLED(smc) && smc->y[PB].cf_join ) {
+			phy->wc_flag = TRUE ;
+		} else {
+			phy->wc_flag = FALSE ;
+		}
+
+		break;
+	case TB:
+		/* take precedence over PA */
+		phy->wc_flag = FALSE ;
+		break;
+	case TS:
+		phy->wc_flag = FALSE ;
+		break;
+	case TM:
+		phy->wc_flag = FALSE ;
+		break;
+	}
+
+}
+
+void all_selection_criteria(struct s_smc *smc)
+{
+	struct s_phy	*phy ;
+	int		p ;
+
+	for ( p = 0,phy = smc->y ; p < NUMPHYS; p++, phy++ ) {
+		/* Do the selection criteria */
+		selection_criteria (smc,phy);
+	}
+}
+
+static void cem_priv_state(struct s_smc *smc, int event)
+/* State machine for private PORT states: used to optimize dual homing */
+{
+	int	np;	/* Number of the port */
+	int	i;
+
+	/* Do this only in a DAS */
+	if (smc->s.sas != SMT_DAS )
+		return ;
+
+	np = event - CF_JOIN;
+
+	if (np != PA && np != PB) {
+		return ;
+	}
+	/* Change the port state according to the event (portnumber) */
+	if (smc->y[np].cf_join) {
+		smc->y[np].cem_pst = CEM_PST_UP ;
+	} else if (!smc->y[np].wc_flag) {
+		/* set the port to done only if it is not withheld */
+		smc->y[np].cem_pst = CEM_PST_DOWN ;
+	}
+
+	/* Don't set an hold port to down */
+
+	/* Check all ports of restart conditions */
+	for (i = 0 ; i < 2 ; i ++ ) {
+		/* Check all port for PORT is on hold and no withhold is done */
+		if ( smc->y[i].cem_pst == CEM_PST_HOLD && !smc->y[i].wc_flag ) {
+			smc->y[i].cem_pst = CEM_PST_DOWN;
+			queue_event(smc,(int)(EVENT_PCM+i),PC_START) ;
+		}
+		if ( smc->y[i].cem_pst == CEM_PST_UP && smc->y[i].wc_flag ) {
+			smc->y[i].cem_pst = CEM_PST_HOLD;
+			queue_event(smc,(int)(EVENT_PCM+i),PC_START) ;
+		}
+		if ( smc->y[i].cem_pst == CEM_PST_DOWN && smc->y[i].wc_flag ) {
+			/*
+			 * The port must be restarted when the wc_flag
+			 * will be reset. So set the port on hold.
+			 */
+			smc->y[i].cem_pst = CEM_PST_HOLD;
+		}
+	}
+	return ;
+}
+
+/*
+	CFM state machine
+	called by dispatcher
+
+	do
+		display state change
+		process event
+	until SM is stable
+*/
+void cfm(struct s_smc *smc, int event)
+{
+	int	state ;		/* remember last state */
+	int	cond ;
+	int	oldstate ;
+
+	/* We will do the following: */
+	/*  - compute the variable WC_Flag for every port (This is where */
+	/*    we can extend the requested path checking !!) */
+	/*  - do the old (SMT 6.2 like) state machine */
+	/*  - do the resulting station states */
+
+	all_selection_criteria (smc);
+
+	/* We will check now whether a state transition is allowed or not */
+	/*  - change the portstates */
+	cem_priv_state (smc, event);
+
+	oldstate = smc->mib.fddiSMTCF_State ;
+	do {
+		DB_CFM("CFM : state %s%s",
+			(smc->mib.fddiSMTCF_State & AFLAG) ? "ACTIONS " : "",
+			cfm_states[smc->mib.fddiSMTCF_State & ~AFLAG]) ;
+		DB_CFM(" event %s\n",cfm_events[event],0) ;
+		state = smc->mib.fddiSMTCF_State ;
+		cfm_fsm(smc,event) ;
+		event = 0 ;
+	} while (state != smc->mib.fddiSMTCF_State) ;
+
+#ifndef	SLIM_SMT
+	/*
+	 * check peer wrap condition
+	 */
+	cond = FALSE ;
+	if (	(smc->mib.fddiSMTCF_State == SC9_C_WRAP_A &&
+		smc->y[PA].pc_mode == PM_PEER) 	||
+		(smc->mib.fddiSMTCF_State == SC10_C_WRAP_B &&
+		smc->y[PB].pc_mode == PM_PEER) 	||
+		(smc->mib.fddiSMTCF_State == SC11_C_WRAP_S &&
+		smc->y[PS].pc_mode == PM_PEER &&
+		smc->y[PS].mib->fddiPORTNeighborType != TS ) ) {
+			cond = TRUE ;
+	}
+	if (cond != smc->mib.fddiSMTPeerWrapFlag)
+		smt_srf_event(smc,SMT_COND_SMT_PEER_WRAP,0,cond) ;
+
+#if	0
+	/*
+	 * Don't send ever MAC_PATH_CHANGE events. Our MAC is hard-wired
+	 * to the primary path.
+	 */
+	/*
+	 * path change
+	 */
+	if (smc->mib.fddiSMTCF_State != oldstate) {
+		smt_srf_event(smc,SMT_EVENT_MAC_PATH_CHANGE,INDEX_MAC,0) ;
+	}
+#endif
+#endif	/* no SLIM_SMT */
+
+	/*
+	 * set MAC port type
+	 */
+	smc->mib.m[MAC0].fddiMACDownstreamPORTType =
+		cf_to_ptype[smc->mib.fddiSMTCF_State] ;
+	cfm_state_change(smc,(int)smc->mib.fddiSMTCF_State) ;
+}
+
+/*
+	process CFM event
+*/
+/*ARGSUSED1*/
+static void cfm_fsm(struct s_smc *smc, int cmd)
+{
+	switch(smc->mib.fddiSMTCF_State) {
+	case ACTIONS(SC0_ISOLATED) :
+		smc->mib.p[PA].fddiPORTCurrentPath = MIB_PATH_ISOLATED ;
+		smc->mib.p[PB].fddiPORTCurrentPath = MIB_PATH_ISOLATED ;
+		smc->mib.p[PA].fddiPORTMACPlacement = 0 ;
+		smc->mib.p[PB].fddiPORTMACPlacement = 0 ;
+		smc->mib.fddiSMTStationStatus = MIB_SMT_STASTA_SEPA ;
+		config_mux(smc,MUX_ISOLATE) ;	/* configure PHY Mux */
+		smc->r.rm_loop = FALSE ;
+		smc->r.rm_join = FALSE ;
+		queue_event(smc,EVENT_RMT,RM_JOIN) ;/* signal RMT */
+		/* Don't do the WC-Flag changing here */
+		ACTIONS_DONE() ;
+		DB_CFMN(1,"CFM : %s\n",cfm_states[smc->mib.fddiSMTCF_State],0) ;
+		break;
+	case SC0_ISOLATED :
+		/*SC07*/
+		/*SAS port can be PA or PB ! */
+		if (smc->s.sas && (smc->y[PA].cf_join || smc->y[PA].cf_loop ||
+				smc->y[PB].cf_join || smc->y[PB].cf_loop)) {
+			GO_STATE(SC11_C_WRAP_S) ;
+			break ;
+		}
+		/*SC01*/
+		if ((smc->y[PA].cem_pst == CEM_PST_UP && smc->y[PA].cf_join &&
+		     !smc->y[PA].wc_flag) || smc->y[PA].cf_loop) {
+			GO_STATE(SC9_C_WRAP_A) ;
+			break ;
+		}
+		/*SC02*/
+		if ((smc->y[PB].cem_pst == CEM_PST_UP && smc->y[PB].cf_join &&
+		     !smc->y[PB].wc_flag) || smc->y[PB].cf_loop) {
+			GO_STATE(SC10_C_WRAP_B) ;
+			break ;
+		}
+		break ;
+	case ACTIONS(SC9_C_WRAP_A) :
+		smc->mib.p[PA].fddiPORTCurrentPath = MIB_PATH_CONCATENATED ;
+		smc->mib.p[PB].fddiPORTCurrentPath = MIB_PATH_ISOLATED ;
+		smc->mib.p[PA].fddiPORTMACPlacement = INDEX_MAC ;
+		smc->mib.p[PB].fddiPORTMACPlacement = 0 ;
+		smc->mib.fddiSMTStationStatus = MIB_SMT_STASTA_CON ;
+		config_mux(smc,MUX_WRAPA) ;		/* configure PHY mux */
+		if (smc->y[PA].cf_loop) {
+			smc->r.rm_join = FALSE ;
+			smc->r.rm_loop = TRUE ;
+			queue_event(smc,EVENT_RMT,RM_LOOP) ;/* signal RMT */
+		}
+		if (smc->y[PA].cf_join) {
+			smc->r.rm_loop = FALSE ;
+			smc->r.rm_join = TRUE ;
+			queue_event(smc,EVENT_RMT,RM_JOIN) ;/* signal RMT */
+		}
+		ACTIONS_DONE() ;
+		DB_CFMN(1,"CFM : %s\n",cfm_states[smc->mib.fddiSMTCF_State],0) ;
+		break ;
+	case SC9_C_WRAP_A :
+		/*SC10*/
+		if ( (smc->y[PA].wc_flag || !smc->y[PA].cf_join) &&
+		      !smc->y[PA].cf_loop ) {
+			GO_STATE(SC0_ISOLATED) ;
+			break ;
+		}
+		/*SC12*/
+		else if ( (smc->y[PB].cf_loop && smc->y[PA].cf_join &&
+			   smc->y[PA].cem_pst == CEM_PST_UP) ||
+			  ((smc->y[PB].cf_loop ||
+			   (smc->y[PB].cf_join &&
+			    smc->y[PB].cem_pst == CEM_PST_UP)) &&
+			    (smc->y[PA].pc_mode == PM_TREE ||
+			     smc->y[PB].pc_mode == PM_TREE))) {
+			smc->y[PA].scrub = TRUE ;
+			GO_STATE(SC10_C_WRAP_B) ;
+			break ;
+		}
+		/*SC14*/
+		else if (!smc->s.attach_s &&
+			  smc->y[PA].cf_join &&
+			  smc->y[PA].cem_pst == CEM_PST_UP &&
+			  smc->y[PA].pc_mode == PM_PEER && smc->y[PB].cf_join &&
+			  smc->y[PB].cem_pst == CEM_PST_UP &&
+			  smc->y[PB].pc_mode == PM_PEER) {
+			smc->y[PA].scrub = TRUE ;
+			smc->y[PB].scrub = TRUE ;
+			GO_STATE(SC4_THRU_A) ;
+			break ;
+		}
+		/*SC15*/
+		else if ( smc->s.attach_s &&
+			  smc->y[PA].cf_join &&
+			  smc->y[PA].cem_pst == CEM_PST_UP &&
+			  smc->y[PA].pc_mode == PM_PEER &&
+			  smc->y[PB].cf_join &&
+			  smc->y[PB].cem_pst == CEM_PST_UP &&
+			  smc->y[PB].pc_mode == PM_PEER) {
+			smc->y[PA].scrub = TRUE ;
+			smc->y[PB].scrub = TRUE ;
+			GO_STATE(SC5_THRU_B) ;
+			break ;
+		}
+		break ;
+	case ACTIONS(SC10_C_WRAP_B) :
+		smc->mib.p[PA].fddiPORTCurrentPath = MIB_PATH_ISOLATED ;
+		smc->mib.p[PB].fddiPORTCurrentPath = MIB_PATH_CONCATENATED ;
+		smc->mib.p[PA].fddiPORTMACPlacement = 0 ;
+		smc->mib.p[PB].fddiPORTMACPlacement = INDEX_MAC ;
+		smc->mib.fddiSMTStationStatus = MIB_SMT_STASTA_CON ;
+		config_mux(smc,MUX_WRAPB) ;		/* configure PHY mux */
+		if (smc->y[PB].cf_loop) {
+			smc->r.rm_join = FALSE ;
+			smc->r.rm_loop = TRUE ;
+			queue_event(smc,EVENT_RMT,RM_LOOP) ;/* signal RMT */
+		}
+		if (smc->y[PB].cf_join) {
+			smc->r.rm_loop = FALSE ;
+			smc->r.rm_join = TRUE ;
+			queue_event(smc,EVENT_RMT,RM_JOIN) ;/* signal RMT */
+		}
+		ACTIONS_DONE() ;
+		DB_CFMN(1,"CFM : %s\n",cfm_states[smc->mib.fddiSMTCF_State],0) ;
+		break ;
+	case SC10_C_WRAP_B :
+		/*SC20*/
+		if ( !smc->y[PB].cf_join && !smc->y[PB].cf_loop ) {
+			GO_STATE(SC0_ISOLATED) ;
+			break ;
+		}
+		/*SC21*/
+		else if ( smc->y[PA].cf_loop && smc->y[PA].pc_mode == PM_PEER &&
+			  smc->y[PB].cf_join && smc->y[PB].pc_mode == PM_PEER) {
+			smc->y[PB].scrub = TRUE ;
+			GO_STATE(SC9_C_WRAP_A) ;
+			break ;
+		}
+		/*SC24*/
+		else if (!smc->s.attach_s &&
+			 smc->y[PA].cf_join && smc->y[PA].pc_mode == PM_PEER &&
+			 smc->y[PB].cf_join && smc->y[PB].pc_mode == PM_PEER) {
+			smc->y[PA].scrub = TRUE ;
+			smc->y[PB].scrub = TRUE ;
+			GO_STATE(SC4_THRU_A) ;
+			break ;
+		}
+		/*SC25*/
+		else if ( smc->s.attach_s &&
+			 smc->y[PA].cf_join && smc->y[PA].pc_mode == PM_PEER &&
+			 smc->y[PB].cf_join && smc->y[PB].pc_mode == PM_PEER) {
+			smc->y[PA].scrub = TRUE ;
+			smc->y[PB].scrub = TRUE ;
+			GO_STATE(SC5_THRU_B) ;
+			break ;
+		}
+		break ;
+	case ACTIONS(SC4_THRU_A) :
+		smc->mib.p[PA].fddiPORTCurrentPath = MIB_PATH_THRU ;
+		smc->mib.p[PB].fddiPORTCurrentPath = MIB_PATH_THRU ;
+		smc->mib.p[PA].fddiPORTMACPlacement = 0 ;
+		smc->mib.p[PB].fddiPORTMACPlacement = INDEX_MAC ;
+		smc->mib.fddiSMTStationStatus = MIB_SMT_STASTA_THRU ;
+		config_mux(smc,MUX_THRUA) ;		/* configure PHY mux */
+		smc->r.rm_loop = FALSE ;
+		smc->r.rm_join = TRUE ;
+		queue_event(smc,EVENT_RMT,RM_JOIN) ;/* signal RMT */
+		ACTIONS_DONE() ;
+		DB_CFMN(1,"CFM : %s\n",cfm_states[smc->mib.fddiSMTCF_State],0) ;
+		break ;
+	case SC4_THRU_A :
+		/*SC41*/
+		if (smc->y[PB].wc_flag || !smc->y[PB].cf_join) {
+			smc->y[PA].scrub = TRUE ;
+			GO_STATE(SC9_C_WRAP_A) ;
+			break ;
+		}
+		/*SC42*/
+		else if (!smc->y[PA].cf_join || smc->y[PA].wc_flag) {
+			smc->y[PB].scrub = TRUE ;
+			GO_STATE(SC10_C_WRAP_B) ;
+			break ;
+		}
+		/*SC45*/
+		else if (smc->s.attach_s) {
+			smc->y[PB].scrub = TRUE ;
+			GO_STATE(SC5_THRU_B) ;
+			break ;
+		}
+		break ;
+	case ACTIONS(SC5_THRU_B) :
+		smc->mib.p[PA].fddiPORTCurrentPath = MIB_PATH_THRU ;
+		smc->mib.p[PB].fddiPORTCurrentPath = MIB_PATH_THRU ;
+		smc->mib.p[PA].fddiPORTMACPlacement = INDEX_MAC ;
+		smc->mib.p[PB].fddiPORTMACPlacement = 0 ;
+		smc->mib.fddiSMTStationStatus = MIB_SMT_STASTA_THRU ;
+		config_mux(smc,MUX_THRUB) ;		/* configure PHY mux */
+		smc->r.rm_loop = FALSE ;
+		smc->r.rm_join = TRUE ;
+		queue_event(smc,EVENT_RMT,RM_JOIN) ;/* signal RMT */
+		ACTIONS_DONE() ;
+		DB_CFMN(1,"CFM : %s\n",cfm_states[smc->mib.fddiSMTCF_State],0) ;
+		break ;
+	case SC5_THRU_B :
+		/*SC51*/
+		if (!smc->y[PB].cf_join || smc->y[PB].wc_flag) {
+			smc->y[PA].scrub = TRUE ;
+			GO_STATE(SC9_C_WRAP_A) ;
+			break ;
+		}
+		/*SC52*/
+		else if (!smc->y[PA].cf_join || smc->y[PA].wc_flag) {
+			smc->y[PB].scrub = TRUE ;
+			GO_STATE(SC10_C_WRAP_B) ;
+			break ;
+		}
+		/*SC54*/
+		else if (!smc->s.attach_s) {
+			smc->y[PA].scrub = TRUE ;
+			GO_STATE(SC4_THRU_A) ;
+			break ;
+		}
+		break ;
+	case ACTIONS(SC11_C_WRAP_S) :
+		smc->mib.p[PS].fddiPORTCurrentPath = MIB_PATH_CONCATENATED ;
+		smc->mib.p[PS].fddiPORTMACPlacement = INDEX_MAC ;
+		smc->mib.fddiSMTStationStatus = MIB_SMT_STASTA_CON ;
+		config_mux(smc,MUX_WRAPS) ;		/* configure PHY mux */
+		if (smc->y[PA].cf_loop || smc->y[PB].cf_loop) {
+			smc->r.rm_join = FALSE ;
+			smc->r.rm_loop = TRUE ;
+			queue_event(smc,EVENT_RMT,RM_LOOP) ;/* signal RMT */
+		}
+		if (smc->y[PA].cf_join || smc->y[PB].cf_join) {
+			smc->r.rm_loop = FALSE ;
+			smc->r.rm_join = TRUE ;
+			queue_event(smc,EVENT_RMT,RM_JOIN) ;/* signal RMT */
+		}
+		ACTIONS_DONE() ;
+		DB_CFMN(1,"CFM : %s\n",cfm_states[smc->mib.fddiSMTCF_State],0) ;
+		break ;
+	case SC11_C_WRAP_S :
+		/*SC70*/
+		if ( !smc->y[PA].cf_join && !smc->y[PA].cf_loop &&
+		     !smc->y[PB].cf_join && !smc->y[PB].cf_loop) {
+			GO_STATE(SC0_ISOLATED) ;
+			break ;
+		}
+		break ;
+	default:
+		SMT_PANIC(smc,SMT_E0106, SMT_E0106_MSG) ;
+		break;
+	}
+}
+
+/*
+ * get MAC's input Port
+ *	return :
+ *		PA or PB
+ */
+int cfm_get_mac_input(struct s_smc *smc)
+{
+	return (smc->mib.fddiSMTCF_State == SC10_C_WRAP_B ||
+		smc->mib.fddiSMTCF_State == SC5_THRU_B) ? PB : PA;
+}
+
+/*
+ * get MAC's output Port
+ *	return :
+ *		PA or PB
+ */
+int cfm_get_mac_output(struct s_smc *smc)
+{
+	return (smc->mib.fddiSMTCF_State == SC10_C_WRAP_B ||
+		smc->mib.fddiSMTCF_State == SC4_THRU_A) ? PB : PA;
+}
+
+static char path_iso[] = {
+	0,0,	0,RES_PORT,	0,PA + INDEX_PORT,	0,PATH_ISO,
+	0,0,	0,RES_MAC,	0,INDEX_MAC,		0,PATH_ISO,
+	0,0,	0,RES_PORT,	0,PB + INDEX_PORT,	0,PATH_ISO
+} ;
+
+static char path_wrap_a[] = {
+	0,0,	0,RES_PORT,	0,PA + INDEX_PORT,	0,PATH_PRIM,
+	0,0,	0,RES_MAC,	0,INDEX_MAC,		0,PATH_PRIM,
+	0,0,	0,RES_PORT,	0,PB + INDEX_PORT,	0,PATH_ISO
+} ;
+
+static char path_wrap_b[] = {
+	0,0,	0,RES_PORT,	0,PB + INDEX_PORT,	0,PATH_PRIM,
+	0,0,	0,RES_MAC,	0,INDEX_MAC,		0,PATH_PRIM,
+	0,0,	0,RES_PORT,	0,PA + INDEX_PORT,	0,PATH_ISO
+} ;
+
+static char path_thru[] = {
+	0,0,	0,RES_PORT,	0,PA + INDEX_PORT,	0,PATH_PRIM,
+	0,0,	0,RES_MAC,	0,INDEX_MAC,		0,PATH_PRIM,
+	0,0,	0,RES_PORT,	0,PB + INDEX_PORT,	0,PATH_PRIM
+} ;
+
+static char path_wrap_s[] = {
+	0,0,	0,RES_PORT,	0,PS + INDEX_PORT,	0,PATH_PRIM,
+	0,0,	0,RES_MAC,	0,INDEX_MAC,		0,PATH_PRIM,
+} ;
+
+static char path_iso_s[] = {
+	0,0,	0,RES_PORT,	0,PS + INDEX_PORT,	0,PATH_ISO,
+	0,0,	0,RES_MAC,	0,INDEX_MAC,		0,PATH_ISO,
+} ;
+
+int cem_build_path(struct s_smc *smc, char *to, int path_index)
+{
+	char	*path ;
+	int	len ;
+
+	switch (smc->mib.fddiSMTCF_State) {
+	default :
+	case SC0_ISOLATED :
+		path = smc->s.sas ? path_iso_s : path_iso ;
+		len = smc->s.sas ? sizeof(path_iso_s) :  sizeof(path_iso) ;
+		break ;
+	case SC9_C_WRAP_A :
+		path = path_wrap_a ;
+		len = sizeof(path_wrap_a) ;
+		break ;
+	case SC10_C_WRAP_B :
+		path = path_wrap_b ;
+		len = sizeof(path_wrap_b) ;
+		break ;
+	case SC4_THRU_A :
+		path = path_thru ;
+		len = sizeof(path_thru) ;
+		break ;
+	case SC11_C_WRAP_S :
+		path = path_wrap_s ;
+		len = sizeof(path_wrap_s) ;
+		break ;
+	}
+	memcpy(to,path,len) ;
+
+	LINT_USE(path_index);
+
+	return len;
+}
diff --git a/drivers/net/fddi/skfp/drvfbi.c b/drivers/net/fddi/skfp/drvfbi.c
new file mode 100644
index 0000000..07da97c
--- /dev/null
+++ b/drivers/net/fddi/skfp/drvfbi.c
@@ -0,0 +1,584 @@
+/******************************************************************************
+ *
+ *	(C)Copyright 1998,1999 SysKonnect,
+ *	a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ *	See the file "skfddi.c" for further information.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+ * FBI board dependent Driver for SMT and LLC
+ */
+
+#include "h/types.h"
+#include "h/fddi.h"
+#include "h/smc.h"
+#include "h/supern_2.h"
+#include "h/skfbiinc.h"
+#include <linux/bitrev.h>
+
+#ifndef	lint
+static const char ID_sccs[] = "@(#)drvfbi.c	1.63 99/02/11 (C) SK " ;
+#endif
+
+/*
+ * PCM active state
+ */
+#define PC8_ACTIVE	8
+
+#define	LED_Y_ON	0x11	/* Used for ring up/down indication */
+#define	LED_Y_OFF	0x10
+
+
+#define MS2BCLK(x)	((x)*12500L)
+
+/*
+ * valid configuration values are:
+ */
+
+/*
+ *	xPOS_ID:xxxx
+ *	|	\  /
+ *	|	 \/
+ *	|	  --------------------- the patched POS_ID of the Adapter
+ *	|				xxxx = (Vendor ID low byte,
+ *	|					Vendor ID high byte,
+ *	|					Device ID low byte,
+ *	|					Device ID high byte)
+ *	+------------------------------ the patched oem_id must be
+ *					'S' for SK or 'I' for IBM
+ *					this is a short id for the driver.
+ */
+#ifndef MULT_OEM
+#ifndef	OEM_CONCEPT
+const u_char oem_id[] = "xPOS_ID:xxxx" ;
+#else	/* OEM_CONCEPT */
+const u_char oem_id[] = OEM_ID ;
+#endif	/* OEM_CONCEPT */
+#define	ID_BYTE0	8
+#define	OEMID(smc,i)	oem_id[ID_BYTE0 + i]
+#else	/* MULT_OEM */
+const struct s_oem_ids oem_ids[] = {
+#include "oemids.h"
+{0}
+};
+#define	OEMID(smc,i)	smc->hw.oem_id->oi_id[i]
+#endif	/* MULT_OEM */
+
+/* Prototypes of external functions */
+#ifdef AIX
+extern int AIX_vpdReadByte() ;
+#endif
+
+
+/* Prototype of a local function. */
+static void smt_stop_watchdog(struct s_smc *smc);
+
+/*
+ * FDDI card reset
+ */
+static void card_start(struct s_smc *smc)
+{
+	int i ;
+#ifdef	PCI
+	u_char	rev_id ;
+	u_short word;
+#endif
+
+	smt_stop_watchdog(smc) ;
+
+#ifdef	PCI
+	/*
+	 * make sure no transfer activity is pending
+	 */
+	outpw(FM_A(FM_MDREG1),FM_MINIT) ;
+	outp(ADDR(B0_CTRL), CTRL_HPI_SET) ;
+	hwt_wait_time(smc,hwt_quick_read(smc),MS2BCLK(10)) ;
+	/*
+	 * now reset everything
+	 */
+	outp(ADDR(B0_CTRL),CTRL_RST_SET) ;	/* reset for all chips */
+	i = (int) inp(ADDR(B0_CTRL)) ;		/* do dummy read */
+	SK_UNUSED(i) ;				/* Make LINT happy. */
+	outp(ADDR(B0_CTRL), CTRL_RST_CLR) ;
+
+	/*
+	 * Reset all bits in the PCI STATUS register
+	 */
+	outp(ADDR(B0_TST_CTRL), TST_CFG_WRITE_ON) ;	/* enable for writes */
+	word = inpw(PCI_C(PCI_STATUS)) ;
+	outpw(PCI_C(PCI_STATUS), word | PCI_ERRBITS) ;
+	outp(ADDR(B0_TST_CTRL), TST_CFG_WRITE_OFF) ;	/* disable writes */
+
+	/*
+	 * Release the reset of all the State machines
+	 * Release Master_Reset
+	 * Release HPI_SM_Reset
+	 */
+	outp(ADDR(B0_CTRL), CTRL_MRST_CLR|CTRL_HPI_CLR) ;
+
+	/*
+	 * determine the adapter type
+	 * Note: Do it here, because some drivers may call card_start() once
+	 *	 at very first before any other initialization functions is
+	 *	 executed.
+	 */
+	rev_id = inp(PCI_C(PCI_REV_ID)) ;
+	if ((rev_id & 0xf0) == SK_ML_ID_1 || (rev_id & 0xf0) == SK_ML_ID_2) {
+		smc->hw.hw_is_64bit = TRUE ;
+	} else {
+		smc->hw.hw_is_64bit = FALSE ;
+	}
+
+	/*
+	 * Watermark initialization
+	 */
+	if (!smc->hw.hw_is_64bit) {
+		outpd(ADDR(B4_R1_F), RX_WATERMARK) ;
+		outpd(ADDR(B5_XA_F), TX_WATERMARK) ;
+		outpd(ADDR(B5_XS_F), TX_WATERMARK) ;
+	}
+
+	outp(ADDR(B0_CTRL),CTRL_RST_CLR) ;	/* clear the reset chips */
+	outp(ADDR(B0_LED),LED_GA_OFF|LED_MY_ON|LED_GB_OFF) ; /* ye LED on */
+
+	/* init the timer value for the watch dog 2,5 minutes */
+	outpd(ADDR(B2_WDOG_INI),0x6FC23AC0) ;
+
+	/* initialize the ISR mask */
+	smc->hw.is_imask = ISR_MASK ;
+	smc->hw.hw_state = STOPPED ;
+#endif
+	GET_PAGE(0) ;		/* necessary for BOOT */
+}
+
+void card_stop(struct s_smc *smc)
+{
+	smt_stop_watchdog(smc) ;
+	smc->hw.mac_ring_is_up = 0 ;		/* ring down */
+
+#ifdef	PCI
+	/*
+	 * make sure no transfer activity is pending
+	 */
+	outpw(FM_A(FM_MDREG1),FM_MINIT) ;
+	outp(ADDR(B0_CTRL), CTRL_HPI_SET) ;
+	hwt_wait_time(smc,hwt_quick_read(smc),MS2BCLK(10)) ;
+	/*
+	 * now reset everything
+	 */
+	outp(ADDR(B0_CTRL),CTRL_RST_SET) ;	/* reset for all chips */
+	outp(ADDR(B0_CTRL),CTRL_RST_CLR) ;	/* reset for all chips */
+	outp(ADDR(B0_LED),LED_GA_OFF|LED_MY_OFF|LED_GB_OFF) ; /* all LEDs off */
+	smc->hw.hw_state = STOPPED ;
+#endif
+}
+/*--------------------------- ISR handling ----------------------------------*/
+
+void mac1_irq(struct s_smc *smc, u_short stu, u_short stl)
+{
+	int	restart_tx = 0 ;
+again:
+
+	/*
+	 * parity error: note encoding error is not possible in tag mode
+	 */
+	if (stl & (FM_SPCEPDS  |	/* parity err. syn.q.*/
+		   FM_SPCEPDA0 |	/* parity err. a.q.0 */
+		   FM_SPCEPDA1)) {	/* parity err. a.q.1 */
+		SMT_PANIC(smc,SMT_E0134, SMT_E0134_MSG) ;
+	}
+	/*
+	 * buffer underrun: can only occur if a tx threshold is specified
+	 */
+	if (stl & (FM_STBURS  |		/* tx buffer underrun syn.q.*/
+		   FM_STBURA0 |		/* tx buffer underrun a.q.0 */
+		   FM_STBURA1)) {	/* tx buffer underrun a.q.2 */
+		SMT_PANIC(smc,SMT_E0133, SMT_E0133_MSG) ;
+	}
+
+	if ( (stu & (FM_SXMTABT |		/* transmit abort */
+		     FM_STXABRS |		/* syn. tx abort */
+		     FM_STXABRA0)) ||		/* asyn. tx abort */
+	     (stl & (FM_SQLCKS |		/* lock for syn. q. */
+		     FM_SQLCKA0)) ) {		/* lock for asyn. q. */
+		formac_tx_restart(smc) ;	/* init tx */
+		restart_tx = 1 ;
+		stu = inpw(FM_A(FM_ST1U)) ;
+		stl = inpw(FM_A(FM_ST1L)) ;
+		stu &= ~ (FM_STECFRMA0 | FM_STEFRMA0 | FM_STEFRMS) ;
+		if (stu || stl)
+			goto again ;
+	}
+
+	if (stu & (FM_STEFRMA0 |	/* end of asyn tx */
+		    FM_STEFRMS)) {	/* end of sync tx */
+		restart_tx = 1 ;
+	}
+
+	if (restart_tx)
+		llc_restart_tx(smc) ;
+}
+
+/*
+ * interrupt source= plc1
+ * this function is called in nwfbisr.asm
+ */
+void plc1_irq(struct s_smc *smc)
+{
+	u_short	st = inpw(PLC(PB,PL_INTR_EVENT)) ;
+
+	plc_irq(smc,PB,st) ;
+}
+
+/*
+ * interrupt source= plc2
+ * this function is called in nwfbisr.asm
+ */
+void plc2_irq(struct s_smc *smc)
+{
+	u_short	st = inpw(PLC(PA,PL_INTR_EVENT)) ;
+
+	plc_irq(smc,PA,st) ;
+}
+
+
+/*
+ * interrupt source= timer
+ */
+void timer_irq(struct s_smc *smc)
+{
+	hwt_restart(smc);
+	smc->hw.t_stop = smc->hw.t_start;
+	smt_timer_done(smc) ;
+}
+
+/*
+ * return S-port (PA or PB)
+ */
+int pcm_get_s_port(struct s_smc *smc)
+{
+	SK_UNUSED(smc) ;
+	return PS;
+}
+
+/*
+ * Station Label = "FDDI-XYZ" where
+ *
+ *	X = connector type
+ *	Y = PMD type
+ *	Z = port type
+ */
+#define STATION_LABEL_CONNECTOR_OFFSET	5
+#define STATION_LABEL_PMD_OFFSET	6
+#define STATION_LABEL_PORT_OFFSET	7
+
+void read_address(struct s_smc *smc, u_char *mac_addr)
+{
+	char ConnectorType ;
+	char PmdType ;
+	int	i ;
+
+#ifdef	PCI
+	for (i = 0; i < 6; i++) {	/* read mac address from board */
+		smc->hw.fddi_phys_addr.a[i] =
+			bitrev8(inp(ADDR(B2_MAC_0+i)));
+	}
+#endif
+
+	ConnectorType = inp(ADDR(B2_CONN_TYP)) ;
+	PmdType = inp(ADDR(B2_PMD_TYP)) ;
+
+	smc->y[PA].pmd_type[PMD_SK_CONN] =
+	smc->y[PB].pmd_type[PMD_SK_CONN] = ConnectorType ;
+	smc->y[PA].pmd_type[PMD_SK_PMD ] =
+	smc->y[PB].pmd_type[PMD_SK_PMD ] = PmdType ;
+
+	if (mac_addr) {
+		for (i = 0; i < 6 ;i++) {
+			smc->hw.fddi_canon_addr.a[i] = mac_addr[i] ;
+			smc->hw.fddi_home_addr.a[i] = bitrev8(mac_addr[i]);
+		}
+		return ;
+	}
+	smc->hw.fddi_home_addr = smc->hw.fddi_phys_addr ;
+
+	for (i = 0; i < 6 ;i++) {
+		smc->hw.fddi_canon_addr.a[i] =
+			bitrev8(smc->hw.fddi_phys_addr.a[i]);
+	}
+}
+
+/*
+ * FDDI card soft reset
+ */
+void init_board(struct s_smc *smc, u_char *mac_addr)
+{
+	card_start(smc) ;
+	read_address(smc,mac_addr) ;
+
+	if (!(inp(ADDR(B0_DAS)) & DAS_AVAIL))
+		smc->s.sas = SMT_SAS ;	/* Single att. station */
+	else
+		smc->s.sas = SMT_DAS ;	/* Dual att. station */
+
+	if (!(inp(ADDR(B0_DAS)) & DAS_BYP_ST))
+		smc->mib.fddiSMTBypassPresent = 0 ;
+		/* without opt. bypass */
+	else
+		smc->mib.fddiSMTBypassPresent = 1 ;
+		/* with opt. bypass */
+}
+
+/*
+ * insert or deinsert optical bypass (called by ECM)
+ */
+void sm_pm_bypass_req(struct s_smc *smc, int mode)
+{
+	DB_ECMN(1,"ECM : sm_pm_bypass_req(%s)\n",(mode == BP_INSERT) ?
+					"BP_INSERT" : "BP_DEINSERT",0) ;
+
+	if (smc->s.sas != SMT_DAS)
+		return ;
+
+#ifdef	PCI
+	switch(mode) {
+	case BP_INSERT :
+		outp(ADDR(B0_DAS),DAS_BYP_INS) ;	/* insert station */
+		break ;
+	case BP_DEINSERT :
+		outp(ADDR(B0_DAS),DAS_BYP_RMV) ;	/* bypass station */
+		break ;
+	}
+#endif
+}
+
+/*
+ * check if bypass connected
+ */
+int sm_pm_bypass_present(struct s_smc *smc)
+{
+	return (inp(ADDR(B0_DAS)) & DAS_BYP_ST) ? TRUE : FALSE;
+}
+
+void plc_clear_irq(struct s_smc *smc, int p)
+{
+	SK_UNUSED(p) ;
+
+	SK_UNUSED(smc) ;
+}
+
+
+/*
+ * led_indication called by rmt_indication() and
+ * pcm_state_change()
+ *
+ * Input:
+ *	smc:	SMT context
+ *	led_event:
+ *	0	Only switch green LEDs according to their respective PCM state
+ *	LED_Y_OFF	just switch yellow LED off
+ *	LED_Y_ON	just switch yello LED on
+ */
+static void led_indication(struct s_smc *smc, int led_event)
+{
+	/* use smc->hw.mac_ring_is_up == TRUE 
+	 * as indication for Ring Operational
+	 */
+	u_short			led_state ;
+	struct s_phy		*phy ;
+	struct fddi_mib_p	*mib_a ;
+	struct fddi_mib_p	*mib_b ;
+
+	phy = &smc->y[PA] ;
+	mib_a = phy->mib ;
+	phy = &smc->y[PB] ;
+	mib_b = phy->mib ;
+
+#ifdef	PCI
+        led_state = 0 ;
+	
+	/* Ring up = yellow led OFF*/
+	if (led_event == LED_Y_ON) {
+		led_state |= LED_MY_ON ;
+	}
+	else if (led_event == LED_Y_OFF) {
+		led_state |= LED_MY_OFF ;
+	}
+	else {	/* PCM state changed */
+		/* Link at Port A/S = green led A ON */
+		if (mib_a->fddiPORTPCMState == PC8_ACTIVE) {	
+			led_state |= LED_GA_ON ;
+		}
+		else {
+			led_state |= LED_GA_OFF ;
+		}
+		
+		/* Link at Port B = green led B ON */
+		if (mib_b->fddiPORTPCMState == PC8_ACTIVE) {
+			led_state |= LED_GB_ON ;
+		}
+		else {
+			led_state |= LED_GB_OFF ;
+		}
+	}
+
+        outp(ADDR(B0_LED), led_state) ;
+#endif	/* PCI */
+
+}
+
+
+void pcm_state_change(struct s_smc *smc, int plc, int p_state)
+{
+	/*
+	 * the current implementation of pcm_state_change() in the driver
+	 * parts must be renamed to drv_pcm_state_change() which will be called
+	 * now after led_indication.
+	 */
+	DRV_PCM_STATE_CHANGE(smc,plc,p_state) ;
+	
+	led_indication(smc,0) ;
+}
+
+
+void rmt_indication(struct s_smc *smc, int i)
+{
+	/* Call a driver special function if defined */
+	DRV_RMT_INDICATION(smc,i) ;
+
+        led_indication(smc, i ? LED_Y_OFF : LED_Y_ON) ;
+}
+
+
+/*
+ * llc_recover_tx called by init_tx (fplus.c)
+ */
+void llc_recover_tx(struct s_smc *smc)
+{
+#ifdef	LOAD_GEN
+	extern	int load_gen_flag ;
+
+	load_gen_flag = 0 ;
+#endif
+#ifndef	SYNC
+	smc->hw.n_a_send= 0 ;
+#else
+	SK_UNUSED(smc) ;
+#endif
+}
+
+#ifdef MULT_OEM
+static int is_equal_num(char comp1[], char comp2[], int num)
+{
+	int i ;
+
+	for (i = 0 ; i < num ; i++) {
+		if (comp1[i] != comp2[i])
+			return 0;
+	}
+		return 1;
+}	/* is_equal_num */
+
+
+/*
+ * set the OEM ID defaults, and test the contents of the OEM data base
+ * The default OEM is the first ACTIVE entry in the OEM data base 
+ *
+ * returns:	0	success
+ *		1	error in data base
+ *		2	data base empty
+ *		3	no active entry	
+ */
+int set_oi_id_def(struct s_smc *smc)
+{
+	int sel_id ;
+	int i ;
+	int act_entries ;
+
+	i = 0 ;
+	sel_id = -1 ;
+	act_entries = FALSE ;
+	smc->hw.oem_id = 0 ;
+	smc->hw.oem_min_status = OI_STAT_ACTIVE ;
+	
+	/* check OEM data base */
+	while (oem_ids[i].oi_status) {
+		switch (oem_ids[i].oi_status) {
+		case OI_STAT_ACTIVE:
+			act_entries = TRUE ;	/* we have active IDs */
+			if (sel_id == -1)
+				sel_id = i ;	/* save the first active ID */
+		case OI_STAT_VALID:
+		case OI_STAT_PRESENT:
+			i++ ;
+			break ;			/* entry ok */
+		default:
+			return 1;		/* invalid oi_status */
+		}
+	}
+
+	if (i == 0)
+		return 2;
+	if (!act_entries)
+		return 3;
+
+	/* ok, we have a valid OEM data base with an active entry */
+	smc->hw.oem_id = (struct s_oem_ids *)  &oem_ids[sel_id] ;
+	return 0;
+}
+#endif	/* MULT_OEM */
+
+void driver_get_bia(struct s_smc *smc, struct fddi_addr *bia_addr)
+{
+	int i ;
+
+	for (i = 0 ; i < 6 ; i++)
+		bia_addr->a[i] = bitrev8(smc->hw.fddi_phys_addr.a[i]);
+}
+
+void smt_start_watchdog(struct s_smc *smc)
+{
+	SK_UNUSED(smc) ;	/* Make LINT happy. */
+
+#ifndef	DEBUG
+
+#ifdef	PCI
+	if (smc->hw.wdog_used) {
+		outpw(ADDR(B2_WDOG_CRTL),TIM_START) ;	/* Start timer. */
+	}
+#endif
+
+#endif	/* DEBUG */
+}
+
+static void smt_stop_watchdog(struct s_smc *smc)
+{
+	SK_UNUSED(smc) ;	/* Make LINT happy. */
+#ifndef	DEBUG
+
+#ifdef	PCI
+	if (smc->hw.wdog_used) {
+		outpw(ADDR(B2_WDOG_CRTL),TIM_STOP) ;	/* Stop timer. */
+	}
+#endif
+
+#endif	/* DEBUG */
+}
+
+#ifdef	PCI
+
+void mac_do_pci_fix(struct s_smc *smc)
+{
+	SK_UNUSED(smc) ;
+}
+#endif	/* PCI */
+
diff --git a/drivers/net/fddi/skfp/ecm.c b/drivers/net/fddi/skfp/ecm.c
new file mode 100644
index 0000000..47d922c
--- /dev/null
+++ b/drivers/net/fddi/skfp/ecm.c
@@ -0,0 +1,536 @@
+/******************************************************************************
+ *
+ *	(C)Copyright 1998,1999 SysKonnect,
+ *	a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ *	See the file "skfddi.c" for further information.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+	SMT ECM
+	Entity Coordination Management
+	Hardware independent state machine
+*/
+
+/*
+ * Hardware independent state machine implemantation
+ * The following external SMT functions are referenced :
+ *
+ * 		queue_event()
+ * 		smt_timer_start()
+ * 		smt_timer_stop()
+ *
+ * 	The following external HW dependent functions are referenced :
+ * 		sm_pm_bypass_req()
+ * 		sm_pm_ls_latch()
+ * 		sm_pm_get_ls()
+ * 
+ * 	The following HW dependent events are required :
+ *		NONE
+ *
+ */
+
+#include "h/types.h"
+#include "h/fddi.h"
+#include "h/smc.h"
+
+#define KERNEL
+#include "h/smtstate.h"
+
+#ifndef	lint
+static const char ID_sccs[] = "@(#)ecm.c	2.7 99/08/05 (C) SK " ;
+#endif
+
+/*
+ * FSM Macros
+ */
+#define AFLAG	0x10
+#define GO_STATE(x)	(smc->mib.fddiSMTECMState = (x)|AFLAG)
+#define ACTIONS_DONE()	(smc->mib.fddiSMTECMState &= ~AFLAG)
+#define ACTIONS(x)	(x|AFLAG)
+
+#define EC0_OUT		0			/* not inserted */
+#define EC1_IN		1			/* inserted */
+#define EC2_TRACE	2			/* tracing */
+#define EC3_LEAVE	3			/* leaving the ring */
+#define EC4_PATH_TEST	4			/* performing path test */
+#define EC5_INSERT	5			/* bypass being turned on */
+#define EC6_CHECK	6			/* checking bypass */
+#define EC7_DEINSERT	7			/* bypass being turnde off */
+
+#ifdef	DEBUG
+/*
+ * symbolic state names
+ */
+static const char * const ecm_states[] = {
+	"EC0_OUT","EC1_IN","EC2_TRACE","EC3_LEAVE","EC4_PATH_TEST",
+	"EC5_INSERT","EC6_CHECK","EC7_DEINSERT"
+} ;
+
+/*
+ * symbolic event names
+ */
+static const char * const ecm_events[] = {
+	"NONE","EC_CONNECT","EC_DISCONNECT","EC_TRACE_PROP","EC_PATH_TEST",
+	"EC_TIMEOUT_TD","EC_TIMEOUT_TMAX",
+	"EC_TIMEOUT_IMAX","EC_TIMEOUT_INMAX","EC_TEST_DONE"
+} ;
+#endif
+
+/*
+ * all Globals  are defined in smc.h
+ * struct s_ecm
+ */
+
+/*
+ * function declarations
+ */
+
+static void ecm_fsm(struct s_smc *smc, int cmd);
+static void start_ecm_timer(struct s_smc *smc, u_long value, int event);
+static void stop_ecm_timer(struct s_smc *smc);
+static void prop_actions(struct s_smc *smc);
+
+/*
+	init ECM state machine
+	clear all ECM vars and flags
+*/
+void ecm_init(struct s_smc *smc)
+{
+	smc->e.path_test = PT_PASSED ;
+	smc->e.trace_prop = 0 ;
+	smc->e.sb_flag = 0 ;
+	smc->mib.fddiSMTECMState = ACTIONS(EC0_OUT) ;
+	smc->e.ecm_line_state = FALSE ;
+}
+
+/*
+	ECM state machine
+	called by dispatcher
+
+	do
+		display state change
+		process event
+	until SM is stable
+*/
+void ecm(struct s_smc *smc, int event)
+{
+	int	state ;
+
+	do {
+		DB_ECM("ECM : state %s%s",
+			(smc->mib.fddiSMTECMState & AFLAG) ? "ACTIONS " : "",
+			ecm_states[smc->mib.fddiSMTECMState & ~AFLAG]) ;
+		DB_ECM(" event %s\n",ecm_events[event],0) ;
+		state = smc->mib.fddiSMTECMState ;
+		ecm_fsm(smc,event) ;
+		event = 0 ;
+	} while (state != smc->mib.fddiSMTECMState) ;
+	ecm_state_change(smc,(int)smc->mib.fddiSMTECMState) ;
+}
+
+/*
+	process ECM event
+*/
+static void ecm_fsm(struct s_smc *smc, int cmd)
+{
+	int ls_a ;			/* current line state PHY A */
+	int ls_b ;			/* current line state PHY B */
+	int	p ;			/* ports */
+
+
+	smc->mib.fddiSMTBypassPresent = sm_pm_bypass_present(smc) ;
+	if (cmd == EC_CONNECT)
+		smc->mib.fddiSMTRemoteDisconnectFlag = FALSE ;
+
+	/* For AIX event notification: */
+	/* Is a disconnect  command remotely issued ? */
+	if (cmd == EC_DISCONNECT &&
+		smc->mib.fddiSMTRemoteDisconnectFlag == TRUE)
+		AIX_EVENT (smc, (u_long) CIO_HARD_FAIL, (u_long)
+			FDDI_REMOTE_DISCONNECT, smt_get_event_word(smc),
+			smt_get_error_word(smc) );
+
+	/*jd 05-Aug-1999 Bug #10419 "Port Disconnect fails at Dup MAc Cond."*/
+	if (cmd == EC_CONNECT) {
+		smc->e.DisconnectFlag = FALSE ;
+	}
+	else if (cmd == EC_DISCONNECT) {
+		smc->e.DisconnectFlag = TRUE ;
+	}
+	
+	switch(smc->mib.fddiSMTECMState) {
+	case ACTIONS(EC0_OUT) :
+		/*
+		 * We do not perform a path test
+		 */
+		smc->e.path_test = PT_PASSED ;
+		smc->e.ecm_line_state = FALSE ;
+		stop_ecm_timer(smc) ;
+		ACTIONS_DONE() ;
+		break ;
+	case EC0_OUT:
+		/*EC01*/
+		if (cmd == EC_CONNECT && !smc->mib.fddiSMTBypassPresent
+			&& smc->e.path_test==PT_PASSED) {
+			GO_STATE(EC1_IN) ;
+			break ;
+		}
+		/*EC05*/
+		else if (cmd == EC_CONNECT && (smc->e.path_test==PT_PASSED) &&
+			smc->mib.fddiSMTBypassPresent &&
+			(smc->s.sas == SMT_DAS)) {
+			GO_STATE(EC5_INSERT) ;
+			break ;
+		}
+		break;
+	case ACTIONS(EC1_IN) :
+		stop_ecm_timer(smc) ;
+		smc->e.trace_prop = 0 ;
+		sm_ma_control(smc,MA_TREQ) ;
+		for (p = 0 ; p < NUMPHYS ; p++)
+			if (smc->mib.p[p].fddiPORTHardwarePresent)
+				queue_event(smc,EVENT_PCMA+p,PC_START) ;
+		ACTIONS_DONE() ;
+		break ;
+	case EC1_IN:
+		/*EC12*/
+		if (cmd == EC_TRACE_PROP) {
+			prop_actions(smc) ;
+			GO_STATE(EC2_TRACE) ;
+			break ;
+		}
+		/*EC13*/
+		else if (cmd == EC_DISCONNECT) {
+			GO_STATE(EC3_LEAVE) ;
+			break ;
+		}
+		break;
+	case ACTIONS(EC2_TRACE) :
+		start_ecm_timer(smc,MIB2US(smc->mib.fddiSMTTrace_MaxExpiration),
+			EC_TIMEOUT_TMAX) ;
+		ACTIONS_DONE() ;
+		break ;
+	case EC2_TRACE :
+		/*EC22*/
+		if (cmd == EC_TRACE_PROP) {
+			prop_actions(smc) ;
+			GO_STATE(EC2_TRACE) ;
+			break ;
+		}
+		/*EC23a*/
+		else if (cmd == EC_DISCONNECT) {
+			smc->e.path_test = PT_EXITING ;
+			GO_STATE(EC3_LEAVE) ;
+			break ;
+		}
+		/*EC23b*/
+		else if (smc->e.path_test == PT_PENDING) {
+			GO_STATE(EC3_LEAVE) ;
+			break ;
+		}
+		/*EC23c*/
+		else if (cmd == EC_TIMEOUT_TMAX) {
+			/* Trace_Max is expired */
+			/* -> send AIX_EVENT */
+			AIX_EVENT(smc, (u_long) FDDI_RING_STATUS,
+				(u_long) FDDI_SMT_ERROR, (u_long)
+				FDDI_TRACE_MAX, smt_get_error_word(smc));
+			smc->e.path_test = PT_PENDING ;
+			GO_STATE(EC3_LEAVE) ;
+			break ;
+		}
+		break ;
+	case ACTIONS(EC3_LEAVE) :
+		start_ecm_timer(smc,smc->s.ecm_td_min,EC_TIMEOUT_TD) ;
+		for (p = 0 ; p < NUMPHYS ; p++)
+			queue_event(smc,EVENT_PCMA+p,PC_STOP) ;
+		ACTIONS_DONE() ;
+		break ;
+	case EC3_LEAVE:
+		/*EC30*/
+		if (cmd == EC_TIMEOUT_TD && !smc->mib.fddiSMTBypassPresent &&
+			(smc->e.path_test != PT_PENDING)) {
+			GO_STATE(EC0_OUT) ;
+			break ;
+		}
+		/*EC34*/
+		else if (cmd == EC_TIMEOUT_TD &&
+			(smc->e.path_test == PT_PENDING)) {
+			GO_STATE(EC4_PATH_TEST) ;
+			break ;
+		}
+		/*EC31*/
+		else if (cmd == EC_CONNECT && smc->e.path_test == PT_PASSED) {
+			GO_STATE(EC1_IN) ;
+			break ;
+		}
+		/*EC33*/
+		else if (cmd == EC_DISCONNECT &&
+			smc->e.path_test == PT_PENDING) {
+			smc->e.path_test = PT_EXITING ;
+			/*
+			 * stay in state - state will be left via timeout
+			 */
+		}
+		/*EC37*/
+		else if (cmd == EC_TIMEOUT_TD &&
+			smc->mib.fddiSMTBypassPresent &&
+			smc->e.path_test != PT_PENDING) {
+			GO_STATE(EC7_DEINSERT) ;
+			break ;
+		}
+		break ;
+	case ACTIONS(EC4_PATH_TEST) :
+		stop_ecm_timer(smc) ;
+		smc->e.path_test = PT_TESTING ;
+		start_ecm_timer(smc,smc->s.ecm_test_done,EC_TEST_DONE) ;
+		/* now perform path test ... just a simulation */
+		ACTIONS_DONE() ;
+		break ;
+	case EC4_PATH_TEST :
+		/* path test done delay */
+		if (cmd == EC_TEST_DONE)
+			smc->e.path_test = PT_PASSED ;
+
+		if (smc->e.path_test == PT_FAILED)
+			RS_SET(smc,RS_PATHTEST) ;
+
+		/*EC40a*/
+		if (smc->e.path_test == PT_FAILED &&
+			!smc->mib.fddiSMTBypassPresent) {
+			GO_STATE(EC0_OUT) ;
+			break ;
+		}
+		/*EC40b*/
+		else if (cmd == EC_DISCONNECT &&
+			!smc->mib.fddiSMTBypassPresent) {
+			GO_STATE(EC0_OUT) ;
+			break ;
+		}
+		/*EC41*/
+		else if (smc->e.path_test == PT_PASSED) {
+			GO_STATE(EC1_IN) ;
+			break ;
+		}
+		/*EC47a*/
+		else if (smc->e.path_test == PT_FAILED &&
+			smc->mib.fddiSMTBypassPresent) {
+			GO_STATE(EC7_DEINSERT) ;
+			break ;
+		}
+		/*EC47b*/
+		else if (cmd == EC_DISCONNECT &&
+			smc->mib.fddiSMTBypassPresent) {
+			GO_STATE(EC7_DEINSERT) ;
+			break ;
+		}
+		break ;
+	case ACTIONS(EC5_INSERT) :
+		sm_pm_bypass_req(smc,BP_INSERT);
+		start_ecm_timer(smc,smc->s.ecm_in_max,EC_TIMEOUT_INMAX) ;
+		ACTIONS_DONE() ;
+		break ;
+	case EC5_INSERT :
+		/*EC56*/
+		if (cmd == EC_TIMEOUT_INMAX) {
+			GO_STATE(EC6_CHECK) ;
+			break ;
+		}
+		/*EC57*/
+		else if (cmd == EC_DISCONNECT) {
+			GO_STATE(EC7_DEINSERT) ;
+			break ;
+		}
+		break ;
+	case ACTIONS(EC6_CHECK) :
+		/*
+		 * in EC6_CHECK, we *POLL* the line state !
+		 * check whether both bypass switches have switched.
+		 */
+		start_ecm_timer(smc,smc->s.ecm_check_poll,0) ;
+		smc->e.ecm_line_state = TRUE ;	/* flag to pcm: report Q/HLS */
+		(void) sm_pm_ls_latch(smc,PA,1) ; /* enable line state latch */
+		(void) sm_pm_ls_latch(smc,PB,1) ; /* enable line state latch */
+		ACTIONS_DONE() ;
+		break ;
+	case EC6_CHECK :
+		ls_a = sm_pm_get_ls(smc,PA) ;
+		ls_b = sm_pm_get_ls(smc,PB) ;
+
+		/*EC61*/
+		if (((ls_a == PC_QLS) || (ls_a == PC_HLS)) &&
+		    ((ls_b == PC_QLS) || (ls_b == PC_HLS)) ) {
+			smc->e.sb_flag = FALSE ;
+			smc->e.ecm_line_state = FALSE ;
+			GO_STATE(EC1_IN) ;
+			break ;
+		}
+		/*EC66*/
+		else if (!smc->e.sb_flag &&
+			 (((ls_a == PC_ILS) && (ls_b == PC_QLS)) ||
+			  ((ls_a == PC_QLS) && (ls_b == PC_ILS)))){
+			smc->e.sb_flag = TRUE ;
+			DB_ECMN(1,"ECM : EC6_CHECK - stuck bypass\n",0,0) ;
+			AIX_EVENT(smc, (u_long) FDDI_RING_STATUS, (u_long)
+				FDDI_SMT_ERROR, (u_long) FDDI_BYPASS_STUCK,
+				smt_get_error_word(smc));
+		}
+		/*EC67*/
+		else if (cmd == EC_DISCONNECT) {
+			smc->e.ecm_line_state = FALSE ;
+			GO_STATE(EC7_DEINSERT) ;
+			break ;
+		}
+		else {
+			/*
+			 * restart poll
+			 */
+			start_ecm_timer(smc,smc->s.ecm_check_poll,0) ;
+		}
+		break ;
+	case ACTIONS(EC7_DEINSERT) :
+		sm_pm_bypass_req(smc,BP_DEINSERT);
+		start_ecm_timer(smc,smc->s.ecm_i_max,EC_TIMEOUT_IMAX) ;
+		ACTIONS_DONE() ;
+		break ;
+	case EC7_DEINSERT:
+		/*EC70*/
+		if (cmd == EC_TIMEOUT_IMAX) {
+			GO_STATE(EC0_OUT) ;
+			break ;
+		}
+		/*EC75*/
+		else if (cmd == EC_CONNECT && smc->e.path_test == PT_PASSED) {
+			GO_STATE(EC5_INSERT) ;
+			break ;
+		}
+		break;
+	default:
+		SMT_PANIC(smc,SMT_E0107, SMT_E0107_MSG) ;
+		break;
+	}
+}
+
+#ifndef	CONCENTRATOR
+/*
+ * trace propagation actions for SAS & DAS
+ */
+static void prop_actions(struct s_smc *smc)
+{
+	int	port_in = 0 ;
+	int	port_out = 0 ;
+
+	RS_SET(smc,RS_EVENT) ;
+	switch (smc->s.sas) {
+	case SMT_SAS :
+		port_in = port_out = pcm_get_s_port(smc) ;
+		break ;
+	case SMT_DAS :
+		port_in = cfm_get_mac_input(smc) ;	/* PA or PB */
+		port_out = cfm_get_mac_output(smc) ;	/* PA or PB */
+		break ;
+	case SMT_NAC :
+		SMT_PANIC(smc,SMT_E0108, SMT_E0108_MSG) ;
+		return ;
+	}
+
+	DB_ECM("ECM : prop_actions - trace_prop %d\n", smc->e.trace_prop,0) ;
+	DB_ECM("ECM : prop_actions - in %d out %d\n", port_in,port_out) ;
+
+	if (smc->e.trace_prop & ENTITY_BIT(ENTITY_MAC)) {
+		/* trace initiatior */
+		DB_ECM("ECM : initiate TRACE on PHY %c\n",'A'+port_in-PA,0) ;
+		queue_event(smc,EVENT_PCM+port_in,PC_TRACE) ;
+	}
+	else if ((smc->e.trace_prop & ENTITY_BIT(ENTITY_PHY(PA))) &&
+		port_out != PA) {
+		/* trace propagate upstream */
+		DB_ECM("ECM : propagate TRACE on PHY B\n",0,0) ;
+		queue_event(smc,EVENT_PCMB,PC_TRACE) ;
+	}
+	else if ((smc->e.trace_prop & ENTITY_BIT(ENTITY_PHY(PB))) &&
+		port_out != PB) {
+		/* trace propagate upstream */
+		DB_ECM("ECM : propagate TRACE on PHY A\n",0,0) ;
+		queue_event(smc,EVENT_PCMA,PC_TRACE) ;
+	}
+	else {
+		/* signal trace termination */
+		DB_ECM("ECM : TRACE terminated\n",0,0) ;
+		smc->e.path_test = PT_PENDING ;
+	}
+	smc->e.trace_prop = 0 ;
+}
+#else
+/*
+ * trace propagation actions for Concentrator
+ */
+static void prop_actions(struct s_smc *smc)
+{
+	int	initiator ;
+	int	upstream ;
+	int	p ;
+
+	RS_SET(smc,RS_EVENT) ;
+	while (smc->e.trace_prop) {
+		DB_ECM("ECM : prop_actions - trace_prop %d\n",
+			smc->e.trace_prop,0) ;
+
+		if (smc->e.trace_prop & ENTITY_BIT(ENTITY_MAC)) {
+			initiator = ENTITY_MAC ;
+			smc->e.trace_prop &= ~ENTITY_BIT(ENTITY_MAC) ;
+			DB_ECM("ECM: MAC initiates trace\n",0,0) ;
+		}
+		else {
+			for (p = NUMPHYS-1 ; p >= 0 ; p--) {
+				if (smc->e.trace_prop &
+					ENTITY_BIT(ENTITY_PHY(p)))
+					break ;
+			}
+			initiator = ENTITY_PHY(p) ;
+			smc->e.trace_prop &= ~ENTITY_BIT(ENTITY_PHY(p)) ;
+		}
+		upstream = cem_get_upstream(smc,initiator) ;
+
+		if (upstream == ENTITY_MAC) {
+			/* signal trace termination */
+			DB_ECM("ECM : TRACE terminated\n",0,0) ;
+			smc->e.path_test = PT_PENDING ;
+		}
+		else {
+			/* trace propagate upstream */
+			DB_ECM("ECM : propagate TRACE on PHY %d\n",upstream,0) ;
+			queue_event(smc,EVENT_PCM+upstream,PC_TRACE) ;
+		}
+	}
+}
+#endif
+
+
+/*
+ * SMT timer interface
+ *	start ECM timer
+ */
+static void start_ecm_timer(struct s_smc *smc, u_long value, int event)
+{
+	smt_timer_start(smc,&smc->e.ecm_timer,value,EV_TOKEN(EVENT_ECM,event));
+}
+
+/*
+ * SMT timer interface
+ *	stop ECM timer
+ */
+static void stop_ecm_timer(struct s_smc *smc)
+{
+	if (smc->e.ecm_timer.tm_active)
+		smt_timer_stop(smc,&smc->e.ecm_timer) ;
+}
diff --git a/drivers/net/fddi/skfp/ess.c b/drivers/net/fddi/skfp/ess.c
new file mode 100644
index 0000000..2fc5987
--- /dev/null
+++ b/drivers/net/fddi/skfp/ess.c
@@ -0,0 +1,720 @@
+/******************************************************************************
+ *
+ *	(C)Copyright 1998,1999 SysKonnect,
+ *	a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ *	See the file "skfddi.c" for further information.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+ * *******************************************************************
+ * This SBA code implements the Synchronous Bandwidth Allocation
+ * functions described in the "FDDI Synchronous Forum Implementer's
+ * Agreement" dated December 1th, 1993.
+ * *******************************************************************
+ *
+ *	PURPOSE: The purpose of this function is to control
+ *		 synchronous allocations on a single FDDI segment.
+ *		 Allocations are limited to the primary FDDI ring.
+ *		 The SBM provides recovery mechanisms to recover
+ *		 unused bandwidth also resolves T_Neg and
+ *		 reconfiguration changes. Many of the SBM state
+ *		 machine inputs are sourced by the underlying
+ *		 FDDI sub-system supporting the SBA application.
+ *
+ * *******************************************************************
+ */
+
+#include "h/types.h"
+#include "h/fddi.h"
+#include "h/smc.h"
+#include "h/smt_p.h"
+
+
+#ifndef	SLIM_SMT
+
+#ifdef ESS
+
+#ifndef lint
+static const char ID_sccs[] = "@(#)ess.c	1.10 96/02/23 (C) SK" ;
+#define LINT_USE(x)
+#else
+#define LINT_USE(x)	(x)=(x)
+#endif
+#define MS2BCLK(x)	((x)*12500L)
+
+/*
+	-------------------------------------------------------------
+	LOCAL VARIABLES:
+	-------------------------------------------------------------
+*/
+
+static const u_short plist_raf_alc_res[] = { SMT_P0012, SMT_P320B, SMT_P320F,
+					SMT_P3210, SMT_P0019, SMT_P001A,
+					SMT_P001D, 0 } ;
+
+static const u_short plist_raf_chg_req[] = { SMT_P320B, SMT_P320F, SMT_P3210,
+					SMT_P001A, 0 } ;
+
+static const struct fddi_addr smt_sba_da = {{0x80,0x01,0x43,0x00,0x80,0x0C}} ;
+static const struct fddi_addr null_addr = {{0,0,0,0,0,0}} ;
+
+/*
+	-------------------------------------------------------------
+	GLOBAL VARIABLES:
+	-------------------------------------------------------------
+*/
+
+
+/*
+	-------------------------------------------------------------
+	LOCAL FUNCTIONS:
+	-------------------------------------------------------------
+*/
+
+static void ess_send_response(struct s_smc *smc, struct smt_header *sm,
+			      int sba_cmd);
+static void ess_config_fifo(struct s_smc *smc);
+static void ess_send_alc_req(struct s_smc *smc);
+static void ess_send_frame(struct s_smc *smc, SMbuf *mb);
+
+/*
+	-------------------------------------------------------------
+	EXTERNAL FUNCTIONS:
+	-------------------------------------------------------------
+*/
+
+/*
+	-------------------------------------------------------------
+	PUBLIC FUNCTIONS:
+	-------------------------------------------------------------
+*/
+
+void ess_timer_poll(struct s_smc *smc);
+void ess_para_change(struct s_smc *smc);
+int ess_raf_received_pack(struct s_smc *smc, SMbuf *mb, struct smt_header *sm,
+			  int fs);
+static int process_bw_alloc(struct s_smc *smc, long int payload, long int overhead);
+
+
+/*
+ * --------------------------------------------------------------------------
+ *	End Station Support	(ESS)
+ * --------------------------------------------------------------------------
+ */
+
+/*
+ * evaluate the RAF frame
+ */
+int ess_raf_received_pack(struct s_smc *smc, SMbuf *mb, struct smt_header *sm,
+			  int fs)
+{
+	void			*p ;		/* universal pointer */
+	struct smt_p_0016	*cmd ;		/* para: command for the ESS */
+	SMbuf			*db ;
+	u_long			msg_res_type ;	/* recource type */
+	u_long			payload, overhead ;
+	int			local ;
+	int			i ;
+
+	/*
+	 * Message Processing Code
+	 */
+	 local = ((fs & L_INDICATOR) != 0) ;
+
+	/*
+	 * get the resource type
+	 */
+	if (!(p = (void *) sm_to_para(smc,sm,SMT_P0015))) {
+		DB_ESS("ESS: RAF frame error, parameter type not found\n",0,0) ;
+		return fs;
+	}
+	msg_res_type = ((struct smt_p_0015 *)p)->res_type ;
+
+	/*
+	 * get the pointer to the ESS command
+	 */
+	if (!(cmd = (struct smt_p_0016 *) sm_to_para(smc,sm,SMT_P0016))) {
+		/*
+		 * error in frame: para ESS command was not found
+		 */
+		 DB_ESS("ESS: RAF frame error, parameter command not found\n",0,0);
+		 return fs;
+	}
+
+	DB_ESSN(2,"fc %x	ft %x\n",sm->smt_class,sm->smt_type) ;
+	DB_ESSN(2,"ver %x	tran %lx\n",sm->smt_version,sm->smt_tid) ;
+	DB_ESSN(2,"stn_id %s\n",addr_to_string(&sm->smt_source),0) ;
+
+	DB_ESSN(2,"infolen %x	res %x\n",sm->smt_len, msg_res_type) ;
+	DB_ESSN(2,"sbacmd %x\n",cmd->sba_cmd,0) ;
+
+	/*
+	 * evaluate the ESS command
+	 */
+	switch (cmd->sba_cmd) {
+
+	/*
+	 * Process an ESS Allocation Request
+	 */
+	case REQUEST_ALLOCATION :
+		/*
+		 * check for an RAF Request (Allocation Request)
+		 */
+		if (sm->smt_type == SMT_REQUEST) {
+			/*
+			 * process the Allocation request only if the frame is
+			 * local and no static allocation is used
+			 */
+			if (!local || smc->mib.fddiESSPayload)
+				return fs;
+			
+			p = (void *) sm_to_para(smc,sm,SMT_P0019)  ;
+			for (i = 0; i < 5; i++) {
+				if (((struct smt_p_0019 *)p)->alloc_addr.a[i]) {
+					return fs;
+				}
+			}
+
+			/*
+			 * Note: The Application should send a LAN_LOC_FRAME.
+			 *	 The ESS do not send the Frame to the network!
+			 */
+			smc->ess.alloc_trans_id = sm->smt_tid ;
+			DB_ESS("ESS: save Alloc Req Trans ID %lx\n",sm->smt_tid,0);
+			p = (void *) sm_to_para(smc,sm,SMT_P320F) ;
+			((struct smt_p_320f *)p)->mib_payload =
+				smc->mib.a[PATH0].fddiPATHSbaPayload ;
+			p = (void *) sm_to_para(smc,sm,SMT_P3210) ;
+			((struct smt_p_3210 *)p)->mib_overhead =
+				smc->mib.a[PATH0].fddiPATHSbaOverhead ;
+			sm->smt_dest = smt_sba_da ;
+
+			if (smc->ess.local_sba_active)
+				return fs | I_INDICATOR;
+
+			if (!(db = smt_get_mbuf(smc)))
+				return fs;
+
+			db->sm_len = mb->sm_len ;
+			db->sm_off = mb->sm_off ;
+			memcpy(((char *)(db->sm_data+db->sm_off)),(char *)sm,
+				(int)db->sm_len) ;
+			dump_smt(smc,
+				(struct smt_header *)(db->sm_data+db->sm_off),
+				"RAF") ;
+			smt_send_frame(smc,db,FC_SMT_INFO,0) ;
+			return fs;
+		}
+
+		/*
+		 * The RAF frame is an Allocation Response !
+		 * check the parameters
+		 */
+		if (smt_check_para(smc,sm,plist_raf_alc_res)) {
+			DB_ESS("ESS: RAF with para problem, ignoring\n",0,0) ;
+			return fs;
+		}
+
+		/*
+		 * VERIFY THE FRAME IS WELL BUILT:
+		 *
+		 *	1. path index = primary ring only
+		 *	2. resource type = sync bw only
+		 *	3. trans action id = alloc_trans_id
+		 *	4. reason code = success
+		 *
+		 * If any are violated, discard the RAF frame
+		 */
+		if ((((struct smt_p_320b *)sm_to_para(smc,sm,SMT_P320B))->path_index
+			!= PRIMARY_RING) ||
+			(msg_res_type != SYNC_BW) ||
+		(((struct smt_p_reason *)sm_to_para(smc,sm,SMT_P0012))->rdf_reason
+			!= SMT_RDF_SUCCESS) ||
+			(sm->smt_tid != smc->ess.alloc_trans_id)) {
+
+			DB_ESS("ESS: Allocation Response not accepted\n",0,0) ;
+			return fs;
+		}
+
+		/*
+		 * Extract message parameters
+		 */
+		p = (void *) sm_to_para(smc,sm,SMT_P320F) ;
+                if (!p) {
+                        printk(KERN_ERR "ESS: sm_to_para failed");
+                        return fs;
+                }       
+		payload = ((struct smt_p_320f *)p)->mib_payload ;
+		p = (void *) sm_to_para(smc,sm,SMT_P3210) ;
+                if (!p) {
+                        printk(KERN_ERR "ESS: sm_to_para failed");
+                        return fs;
+                }       
+		overhead = ((struct smt_p_3210 *)p)->mib_overhead ;
+
+		DB_ESSN(2,"payload= %lx	overhead= %lx\n",payload,overhead) ;
+
+		/*
+		 * process the bandwidth allocation
+		 */
+		(void)process_bw_alloc(smc,(long)payload,(long)overhead) ;
+
+		return fs;
+		/* end of Process Allocation Request */
+
+	/*
+	 * Process an ESS Change Request
+	 */
+	case CHANGE_ALLOCATION :
+		/*
+		 * except only replies
+		 */
+		if (sm->smt_type != SMT_REQUEST) {
+			DB_ESS("ESS: Do not process Change Responses\n",0,0) ;
+			return fs;
+		}
+
+		/*
+		 * check the para for the Change Request
+		 */
+		if (smt_check_para(smc,sm,plist_raf_chg_req)) {
+			DB_ESS("ESS: RAF with para problem, ignoring\n",0,0) ;
+			return fs;
+		}
+
+		/*
+		 * Verify the path index and resource
+		 * type are correct. If any of
+		 * these are false, don't process this
+		 * change request frame.
+		 */
+		if ((((struct smt_p_320b *)sm_to_para(smc,sm,SMT_P320B))->path_index
+			!= PRIMARY_RING) || (msg_res_type != SYNC_BW)) {
+			DB_ESS("ESS: RAF frame with para problem, ignoring\n",0,0) ;
+			return fs;
+		}
+
+		/*
+		 * Extract message queue parameters
+		 */
+		p = (void *) sm_to_para(smc,sm,SMT_P320F) ;
+		payload = ((struct smt_p_320f *)p)->mib_payload ;
+		p = (void *) sm_to_para(smc,sm,SMT_P3210) ;
+		overhead = ((struct smt_p_3210 *)p)->mib_overhead ;
+
+		DB_ESSN(2,"ESS: Change Request from %s\n",
+			addr_to_string(&sm->smt_source),0) ;
+		DB_ESSN(2,"payload= %lx	overhead= %lx\n",payload,overhead) ;
+
+		/*
+		 * process the bandwidth allocation
+		 */
+		if(!process_bw_alloc(smc,(long)payload,(long)overhead))
+			return fs;
+
+		/*
+		 * send an RAF Change Reply
+		 */
+		ess_send_response(smc,sm,CHANGE_ALLOCATION) ;
+
+		return fs;
+		/* end of Process Change Request */
+
+	/*
+	 * Process Report Response
+	 */
+	case REPORT_ALLOCATION :
+		/*
+		 * except only requests
+		 */
+		if (sm->smt_type != SMT_REQUEST) {
+			DB_ESS("ESS: Do not process a Report Reply\n",0,0) ;
+			return fs;
+		}
+
+		DB_ESSN(2,"ESS: Report Request from %s\n",
+			addr_to_string(&(sm->smt_source)),0) ;
+
+		/*
+		 * verify that the resource type is sync bw only
+		 */
+		if (msg_res_type != SYNC_BW) {
+			DB_ESS("ESS: ignoring RAF with para problem\n",0,0) ;
+			return fs;
+		}
+
+		/*
+		 * send an RAF Change Reply
+		 */
+		ess_send_response(smc,sm,REPORT_ALLOCATION) ;
+
+		return fs;
+		/* end of Process Report Request */
+
+	default:
+		/*
+		 * error in frame
+		 */
+		DB_ESS("ESS: ignoring RAF with bad sba_cmd\n",0,0) ;
+		break ;
+	}
+
+	return fs;
+}
+
+/*
+ * determines the synchronous bandwidth, set the TSYNC register and the
+ * mib variables SBAPayload, SBAOverhead and fddiMACT-NEG.
+ */
+static int process_bw_alloc(struct s_smc *smc, long int payload, long int overhead)
+{
+	/*
+	 * determine the synchronous bandwidth (sync_bw) in bytes per T-NEG,
+	 * if the payload is greater than zero.
+	 * For the SBAPayload and the SBAOverhead we have the following
+	 * unite quations
+ 	 *		      _		  _
+	 *		     |	     bytes |
+	 *	SBAPayload = | 8000 ------ |
+	 *		     |		s  |
+	 *		      -		  -
+ 	 *		       _       _
+	 *		      |	 bytes	|
+	 *	SBAOverhead = | ------	|
+	 *		      |	 T-NEG	|
+	 *		       -       -
+ 	 *
+	 * T-NEG is described by the equation:
+	 *
+	 *		     (-) fddiMACT-NEG
+	 *	T-NEG =	    -------------------
+	 *			12500000 1/s
+	 *
+	 * The number of bytes we are able to send is the payload
+	 * plus the overhead.
+	 *
+	 *			  bytes    T-NEG SBAPayload 8000 bytes/s
+	 * sync_bw =  SBAOverhead ------ + -----------------------------
+	 *	   		  T-NEG		T-NEG
+	 *
+	 *
+	 *	      		     1
+	 * sync_bw =  SBAOverhead + ---- (-)fddiMACT-NEG * SBAPayload
+	 *	       		    1562
+	 *
+	 */
+
+	/*
+	 * set the mib attributes fddiPATHSbaOverhead, fddiPATHSbaPayload
+	 */
+/*	if (smt_set_obj(smc,SMT_P320F,payload,S_SET)) {
+		DB_ESS("ESS: SMT does not accept the payload value\n",0,0) ;
+		return FALSE;
+	}
+	if (smt_set_obj(smc,SMT_P3210,overhead,S_SET)) {
+		DB_ESS("ESS: SMT does not accept the overhead value\n",0,0) ;
+		return FALSE;
+	} */
+
+	/* premliminary */
+	if (payload > MAX_PAYLOAD || overhead > 5000) {
+		DB_ESS("ESS: payload / overhead not accepted\n",0,0) ;
+		return FALSE;
+	}
+
+	/*
+	 * start the iterative allocation process if the payload or the overhead
+	 * are smaller than the parsed values
+	 */
+	if (smc->mib.fddiESSPayload &&
+		((u_long)payload != smc->mib.fddiESSPayload ||
+		(u_long)overhead != smc->mib.fddiESSOverhead)) {
+		smc->ess.raf_act_timer_poll = TRUE ;
+		smc->ess.timer_count = 0 ;
+	}
+
+	/*
+	 * evulate the Payload
+	 */
+	if (payload) {
+		DB_ESSN(2,"ESS: turn SMT_ST_SYNC_SERVICE bit on\n",0,0) ;
+		smc->ess.sync_bw_available = TRUE ;
+
+		smc->ess.sync_bw = overhead -
+			(long)smc->mib.m[MAC0].fddiMACT_Neg *
+			payload / 1562 ;
+	}
+	else {
+		DB_ESSN(2,"ESS: turn SMT_ST_SYNC_SERVICE bit off\n",0,0) ;
+		smc->ess.sync_bw_available = FALSE ;
+		smc->ess.sync_bw = 0 ;
+		overhead = 0 ;
+	}
+
+	smc->mib.a[PATH0].fddiPATHSbaPayload = payload ;
+	smc->mib.a[PATH0].fddiPATHSbaOverhead = overhead ;
+
+
+	DB_ESSN(2,"tsync = %lx\n",smc->ess.sync_bw,0) ;
+
+	ess_config_fifo(smc) ;
+	set_formac_tsync(smc,smc->ess.sync_bw) ;
+	return TRUE;
+}
+
+static void ess_send_response(struct s_smc *smc, struct smt_header *sm,
+			      int sba_cmd)
+{
+	struct smt_sba_chg	*chg ;
+	SMbuf			*mb ;
+	void			*p ;
+
+	/*
+	 * get and initialize the response frame
+	 */
+	if (sba_cmd == CHANGE_ALLOCATION) {
+		if (!(mb=smt_build_frame(smc,SMT_RAF,SMT_REPLY,
+				sizeof(struct smt_sba_chg))))
+				return ;
+	}
+	else {
+		if (!(mb=smt_build_frame(smc,SMT_RAF,SMT_REPLY,
+				sizeof(struct smt_sba_rep_res))))
+				return ;
+	}
+
+	chg = smtod(mb,struct smt_sba_chg *) ;
+	chg->smt.smt_tid = sm->smt_tid ;
+	chg->smt.smt_dest = sm->smt_source ;
+
+	/* set P15 */
+	chg->s_type.para.p_type = SMT_P0015 ;
+	chg->s_type.para.p_len = sizeof(struct smt_p_0015) - PARA_LEN ;
+	chg->s_type.res_type = SYNC_BW ;
+
+	/* set P16 */
+	chg->cmd.para.p_type = SMT_P0016 ;
+	chg->cmd.para.p_len = sizeof(struct smt_p_0016) - PARA_LEN ;
+	chg->cmd.sba_cmd = sba_cmd ;
+
+	/* set P320B */
+	chg->path.para.p_type = SMT_P320B ;
+	chg->path.para.p_len = sizeof(struct smt_p_320b) - PARA_LEN ;
+	chg->path.mib_index = SBAPATHINDEX ;
+	chg->path.path_pad = 0;
+	chg->path.path_index = PRIMARY_RING ;
+
+	/* set P320F */
+	chg->payload.para.p_type = SMT_P320F ;
+	chg->payload.para.p_len = sizeof(struct smt_p_320f) - PARA_LEN ;
+	chg->payload.mib_index = SBAPATHINDEX ;
+	chg->payload.mib_payload = smc->mib.a[PATH0].fddiPATHSbaPayload ;
+
+	/* set P3210 */
+	chg->overhead.para.p_type = SMT_P3210 ;
+	chg->overhead.para.p_len = sizeof(struct smt_p_3210) - PARA_LEN ;
+	chg->overhead.mib_index = SBAPATHINDEX ;
+	chg->overhead.mib_overhead = smc->mib.a[PATH0].fddiPATHSbaOverhead ;
+
+	if (sba_cmd == CHANGE_ALLOCATION) {
+		/* set P1A */
+		chg->cat.para.p_type = SMT_P001A ;
+		chg->cat.para.p_len = sizeof(struct smt_p_001a) - PARA_LEN ;
+		p = (void *) sm_to_para(smc,sm,SMT_P001A) ;
+		chg->cat.category = ((struct smt_p_001a *)p)->category ;
+	}
+	dump_smt(smc,(struct smt_header *)chg,"RAF") ;
+	ess_send_frame(smc,mb) ;
+}
+
+void ess_timer_poll(struct s_smc *smc)
+{
+	if (!smc->ess.raf_act_timer_poll)
+		return ;
+
+	DB_ESSN(2,"ESS: timer_poll\n",0,0) ;
+
+	smc->ess.timer_count++ ;
+	if (smc->ess.timer_count == 10) {
+		smc->ess.timer_count = 0 ;
+		ess_send_alc_req(smc) ;
+	}
+}
+
+static void ess_send_alc_req(struct s_smc *smc)
+{
+	struct smt_sba_alc_req *req ;
+	SMbuf	*mb ;
+
+	/*
+	 * send never allocation request where the requested payload and
+	 * overhead is zero or deallocate bandwidth when no bandwidth is
+	 * parsed
+	 */
+	if (!smc->mib.fddiESSPayload) {
+		smc->mib.fddiESSOverhead = 0 ;
+	}
+	else {
+		if (!smc->mib.fddiESSOverhead)
+			smc->mib.fddiESSOverhead = DEFAULT_OV ;
+	}
+
+	if (smc->mib.fddiESSOverhead ==
+		smc->mib.a[PATH0].fddiPATHSbaOverhead &&
+		smc->mib.fddiESSPayload ==
+		smc->mib.a[PATH0].fddiPATHSbaPayload){
+		smc->ess.raf_act_timer_poll = FALSE ;
+		smc->ess.timer_count = 7 ;	/* next RAF alc req after 3 s */
+		return ;
+	}
+	
+	/*
+	 * get and initialize the response frame
+	 */
+	if (!(mb=smt_build_frame(smc,SMT_RAF,SMT_REQUEST,
+			sizeof(struct smt_sba_alc_req))))
+			return ;
+	req = smtod(mb,struct smt_sba_alc_req *) ;
+	req->smt.smt_tid = smc->ess.alloc_trans_id = smt_get_tid(smc) ;
+	req->smt.smt_dest = smt_sba_da ;
+
+	/* set P15 */
+	req->s_type.para.p_type = SMT_P0015 ;
+	req->s_type.para.p_len = sizeof(struct smt_p_0015) - PARA_LEN ;
+	req->s_type.res_type = SYNC_BW ;
+
+	/* set P16 */
+	req->cmd.para.p_type = SMT_P0016 ;
+	req->cmd.para.p_len = sizeof(struct smt_p_0016) - PARA_LEN ;
+	req->cmd.sba_cmd = REQUEST_ALLOCATION ;
+
+	/*
+	 * set the parameter type and parameter length of all used
+	 * parameters
+	 */
+
+	/* set P320B */
+	req->path.para.p_type = SMT_P320B ;
+	req->path.para.p_len = sizeof(struct smt_p_320b) - PARA_LEN ;
+	req->path.mib_index = SBAPATHINDEX ;
+	req->path.path_pad = 0;
+	req->path.path_index = PRIMARY_RING ;
+
+	/* set P0017 */
+	req->pl_req.para.p_type = SMT_P0017 ;
+	req->pl_req.para.p_len = sizeof(struct smt_p_0017) - PARA_LEN ;
+	req->pl_req.sba_pl_req = smc->mib.fddiESSPayload -
+		smc->mib.a[PATH0].fddiPATHSbaPayload ;
+
+	/* set P0018 */
+	req->ov_req.para.p_type = SMT_P0018 ;
+	req->ov_req.para.p_len = sizeof(struct smt_p_0018) - PARA_LEN ;
+	req->ov_req.sba_ov_req = smc->mib.fddiESSOverhead -
+		smc->mib.a[PATH0].fddiPATHSbaOverhead ;
+
+	/* set P320F */
+	req->payload.para.p_type = SMT_P320F ;
+	req->payload.para.p_len = sizeof(struct smt_p_320f) - PARA_LEN ;
+	req->payload.mib_index = SBAPATHINDEX ;
+	req->payload.mib_payload = smc->mib.a[PATH0].fddiPATHSbaPayload ;
+
+	/* set P3210 */
+	req->overhead.para.p_type = SMT_P3210 ;
+	req->overhead.para.p_len = sizeof(struct smt_p_3210) - PARA_LEN ;
+	req->overhead.mib_index = SBAPATHINDEX ;
+	req->overhead.mib_overhead = smc->mib.a[PATH0].fddiPATHSbaOverhead ;
+
+	/* set P19 */
+	req->a_addr.para.p_type = SMT_P0019 ;
+	req->a_addr.para.p_len = sizeof(struct smt_p_0019) - PARA_LEN ;
+	req->a_addr.sba_pad = 0;
+	req->a_addr.alloc_addr = null_addr ;
+
+	/* set P1A */
+	req->cat.para.p_type = SMT_P001A ;
+	req->cat.para.p_len = sizeof(struct smt_p_001a) - PARA_LEN ;
+	req->cat.category = smc->mib.fddiESSCategory ;
+
+	/* set P1B */
+	req->tneg.para.p_type = SMT_P001B ;
+	req->tneg.para.p_len = sizeof(struct smt_p_001b) - PARA_LEN ;
+	req->tneg.max_t_neg = smc->mib.fddiESSMaxTNeg ;
+
+	/* set P1C */
+	req->segm.para.p_type = SMT_P001C ;
+	req->segm.para.p_len = sizeof(struct smt_p_001c) - PARA_LEN ;
+	req->segm.min_seg_siz = smc->mib.fddiESSMinSegmentSize ;
+
+	dump_smt(smc,(struct smt_header *)req,"RAF") ;
+	ess_send_frame(smc,mb) ;
+}
+
+static void ess_send_frame(struct s_smc *smc, SMbuf *mb)
+{
+	/*
+	 * check if the frame must be send to the own ESS
+	 */
+	if (smc->ess.local_sba_active) {
+		/*
+		 * Send the Change Reply to the local SBA
+		 */
+		DB_ESS("ESS:Send to the local SBA\n",0,0) ;
+		if (!smc->ess.sba_reply_pend)
+			smc->ess.sba_reply_pend = mb ;
+		else {
+			DB_ESS("Frame is lost - another frame was pending\n",0,0);
+			smt_free_mbuf(smc,mb) ;
+		}
+	}
+	else {
+		/*
+		 * Send the SBA RAF Change Reply to the network
+		 */
+		DB_ESS("ESS:Send to the network\n",0,0) ;
+		smt_send_frame(smc,mb,FC_SMT_INFO,0) ;
+	}
+}
+
+void ess_para_change(struct s_smc *smc)
+{
+	(void)process_bw_alloc(smc,(long)smc->mib.a[PATH0].fddiPATHSbaPayload,
+		(long)smc->mib.a[PATH0].fddiPATHSbaOverhead) ;
+}
+
+static void ess_config_fifo(struct s_smc *smc)
+{
+	/*
+	 * if nothing to do exit 
+	 */
+	if (smc->mib.a[PATH0].fddiPATHSbaPayload) {
+		if (smc->hw.fp.fifo.fifo_config_mode & SYNC_TRAFFIC_ON &&
+			(smc->hw.fp.fifo.fifo_config_mode&SEND_ASYNC_AS_SYNC) ==
+			smc->mib.fddiESSSynchTxMode) {
+			return ;
+		}
+	}
+	else {
+		if (!(smc->hw.fp.fifo.fifo_config_mode & SYNC_TRAFFIC_ON)) {
+			return ;
+		}
+	}
+
+	/*
+	 * split up the FIFO and reinitialize the queues
+	 */
+	formac_reinit_tx(smc) ;
+}
+
+#endif /* ESS */
+
+#endif	/* no SLIM_SMT */
+
diff --git a/drivers/net/fddi/skfp/fplustm.c b/drivers/net/fddi/skfp/fplustm.c
new file mode 100644
index 0000000..a20ed1a
--- /dev/null
+++ b/drivers/net/fddi/skfp/fplustm.c
@@ -0,0 +1,1491 @@
+/******************************************************************************
+ *
+ *	(C)Copyright 1998,1999 SysKonnect,
+ *	a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ *	See the file "skfddi.c" for further information.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+ * FORMAC+ Driver for tag mode
+ */
+
+#include "h/types.h"
+#include "h/fddi.h"
+#include "h/smc.h"
+#include "h/supern_2.h"
+#include <linux/bitrev.h>
+
+#ifndef	lint
+static const char ID_sccs[] = "@(#)fplustm.c	1.32 99/02/23 (C) SK " ;
+#endif
+
+#ifndef UNUSED
+#ifdef  lint
+#define UNUSED(x)	(x) = (x)
+#else
+#define UNUSED(x)
+#endif
+#endif
+
+#define FM_ADDRX	 (FM_ADDET|FM_EXGPA0|FM_EXGPA1)
+#define MS2BCLK(x)	((x)*12500L)
+#define US2BCLK(x)	((x)*1250L)
+
+/*
+ * prototypes for static function
+ */
+static void build_claim_beacon(struct s_smc *smc, u_long t_request);
+static int init_mac(struct s_smc *smc, int all);
+static void rtm_init(struct s_smc *smc);
+static void smt_split_up_fifo(struct s_smc *smc);
+
+#if (!defined(NO_SMT_PANIC) || defined(DEBUG))
+static	char write_mdr_warning [] = "E350 write_mdr() FM_SNPPND is set\n";
+static	char cam_warning [] = "E_SMT_004: CAM still busy\n";
+#endif
+
+#define	DUMMY_READ()	smc->hw.mc_dummy = (u_short) inp(ADDR(B0_RAP))
+
+#define	CHECK_NPP() {	unsigned k = 10000 ;\
+			while ((inpw(FM_A(FM_STMCHN)) & FM_SNPPND) && k) k--;\
+			if (!k) { \
+				SMT_PANIC(smc,SMT_E0130, SMT_E0130_MSG) ; \
+			}	\
+		}
+
+#define	CHECK_CAM() {	unsigned k = 10 ;\
+			while (!(inpw(FM_A(FM_AFSTAT)) & FM_DONE) && k) k--;\
+			if (!k) { \
+				SMT_PANIC(smc,SMT_E0131, SMT_E0131_MSG) ; \
+			}	\
+		}
+
+const struct fddi_addr fddi_broadcast = {{0xff,0xff,0xff,0xff,0xff,0xff}};
+static const struct fddi_addr null_addr = {{0,0,0,0,0,0}};
+static const struct fddi_addr dbeacon_multi = {{0x01,0x80,0xc2,0x00,0x01,0x00}};
+
+static const u_short my_said = 0xffff ;	/* short address (n.u.) */
+static const u_short my_sagp = 0xffff ;	/* short group address (n.u.) */
+
+/*
+ * define my address
+ */
+#ifdef	USE_CAN_ADDR
+#define MA	smc->hw.fddi_canon_addr
+#else
+#define MA	smc->hw.fddi_home_addr
+#endif
+
+
+/*
+ * useful interrupt bits
+ */
+static const int mac_imsk1u = FM_STXABRS | FM_STXABRA0 | FM_SXMTABT ;
+static const int mac_imsk1l = FM_SQLCKS | FM_SQLCKA0 | FM_SPCEPDS | FM_SPCEPDA0|
+			FM_STBURS | FM_STBURA0 ;
+
+	/* delete FM_SRBFL after tests */
+static const int mac_imsk2u = FM_SERRSF | FM_SNFSLD | FM_SRCVOVR | FM_SRBFL |
+			FM_SMYCLM ;
+static const int mac_imsk2l = FM_STRTEXR | FM_SDUPCLM | FM_SFRMCTR |
+			FM_SERRCTR | FM_SLSTCTR |
+			FM_STRTEXP | FM_SMULTDA | FM_SRNGOP ;
+
+static const int mac_imsk3u = FM_SRCVOVR2 | FM_SRBFL2 ;
+static const int mac_imsk3l = FM_SRPERRQ2 | FM_SRPERRQ1 ;
+
+static const int mac_beacon_imsk2u = FM_SOTRBEC | FM_SMYBEC | FM_SBEC |
+			FM_SLOCLM | FM_SHICLM | FM_SMYCLM | FM_SCLM ;
+
+
+static u_long mac_get_tneg(struct s_smc *smc)
+{
+	u_long	tneg ;
+
+	tneg = (u_long)((long)inpw(FM_A(FM_TNEG))<<5) ;
+	return (u_long)((tneg + ((inpw(FM_A(FM_TMRS))>>10)&0x1f)) |
+		0xffe00000L) ;
+}
+
+void mac_update_counter(struct s_smc *smc)
+{
+	smc->mib.m[MAC0].fddiMACFrame_Ct =
+		(smc->mib.m[MAC0].fddiMACFrame_Ct & 0xffff0000L)
+		+ (u_short) inpw(FM_A(FM_FCNTR)) ;
+	smc->mib.m[MAC0].fddiMACLost_Ct =
+		(smc->mib.m[MAC0].fddiMACLost_Ct & 0xffff0000L)
+		+ (u_short) inpw(FM_A(FM_LCNTR)) ;
+	smc->mib.m[MAC0].fddiMACError_Ct =
+		(smc->mib.m[MAC0].fddiMACError_Ct & 0xffff0000L)
+		+ (u_short) inpw(FM_A(FM_ECNTR)) ;
+	smc->mib.m[MAC0].fddiMACT_Neg = mac_get_tneg(smc) ;
+#ifdef SMT_REAL_TOKEN_CT
+	/*
+	 * If the token counter is emulated it is updated in smt_event.
+	 */
+	TBD
+#else
+	smt_emulate_token_ct( smc, MAC0 );
+#endif
+}
+
+/*
+ * write long value into buffer memory over memory data register (MDR),
+ */
+static void write_mdr(struct s_smc *smc, u_long val)
+{
+	CHECK_NPP() ;
+	MDRW(val) ;
+}
+
+#if 0
+/*
+ * read long value from buffer memory over memory data register (MDR),
+ */
+static u_long read_mdr(struct s_smc *smc, unsigned int addr)
+{
+	long p ;
+	CHECK_NPP() ;
+	MARR(addr) ;
+	outpw(FM_A(FM_CMDREG1),FM_IRMEMWO) ;
+	CHECK_NPP() ;	/* needed for PCI to prevent from timeing violations */
+/*	p = MDRR() ; */	/* bad read values if the workaround */
+			/* smc->hw.mc_dummy = *((short volatile far *)(addr)))*/
+			/* is used */
+	p = (u_long)inpw(FM_A(FM_MDRU))<<16 ;
+	p += (u_long)inpw(FM_A(FM_MDRL)) ;
+	return p;
+}
+#endif
+
+/*
+ * clear buffer memory
+ */
+static void init_ram(struct s_smc *smc)
+{
+	u_short i ;
+
+	smc->hw.fp.fifo.rbc_ram_start = 0 ;
+	smc->hw.fp.fifo.rbc_ram_end =
+		smc->hw.fp.fifo.rbc_ram_start + RBC_MEM_SIZE ;
+	CHECK_NPP() ;
+	MARW(smc->hw.fp.fifo.rbc_ram_start) ;
+	for (i = smc->hw.fp.fifo.rbc_ram_start;
+		i < (u_short) (smc->hw.fp.fifo.rbc_ram_end-1); i++)
+		write_mdr(smc,0L) ;
+	/* Erase the last byte too */
+	write_mdr(smc,0L) ;
+}
+
+/*
+ * set receive FIFO pointer
+ */
+static void set_recvptr(struct s_smc *smc)
+{
+	/*
+	 * initialize the pointer for receive queue 1
+	 */
+	outpw(FM_A(FM_RPR1),smc->hw.fp.fifo.rx1_fifo_start) ;	/* RPR1 */
+	outpw(FM_A(FM_SWPR1),smc->hw.fp.fifo.rx1_fifo_start) ;	/* SWPR1 */
+	outpw(FM_A(FM_WPR1),smc->hw.fp.fifo.rx1_fifo_start) ;	/* WPR1 */
+	outpw(FM_A(FM_EARV1),smc->hw.fp.fifo.tx_s_start-1) ;	/* EARV1 */
+
+	/*
+	 * initialize the pointer for receive queue 2
+	 */
+	if (smc->hw.fp.fifo.rx2_fifo_size) {
+		outpw(FM_A(FM_RPR2),smc->hw.fp.fifo.rx2_fifo_start) ;
+		outpw(FM_A(FM_SWPR2),smc->hw.fp.fifo.rx2_fifo_start) ;
+		outpw(FM_A(FM_WPR2),smc->hw.fp.fifo.rx2_fifo_start) ;
+		outpw(FM_A(FM_EARV2),smc->hw.fp.fifo.rbc_ram_end-1) ;
+	}
+	else {
+		outpw(FM_A(FM_RPR2),smc->hw.fp.fifo.rbc_ram_end-1) ;
+		outpw(FM_A(FM_SWPR2),smc->hw.fp.fifo.rbc_ram_end-1) ;
+		outpw(FM_A(FM_WPR2),smc->hw.fp.fifo.rbc_ram_end-1) ;
+		outpw(FM_A(FM_EARV2),smc->hw.fp.fifo.rbc_ram_end-1) ;
+	}
+}
+
+/*
+ * set transmit FIFO pointer
+ */
+static void set_txptr(struct s_smc *smc)
+{
+	outpw(FM_A(FM_CMDREG2),FM_IRSTQ) ;	/* reset transmit queues */
+
+	/*
+	 * initialize the pointer for asynchronous transmit queue
+	 */
+	outpw(FM_A(FM_RPXA0),smc->hw.fp.fifo.tx_a0_start) ;	/* RPXA0 */
+	outpw(FM_A(FM_SWPXA0),smc->hw.fp.fifo.tx_a0_start) ;	/* SWPXA0 */
+	outpw(FM_A(FM_WPXA0),smc->hw.fp.fifo.tx_a0_start) ;	/* WPXA0 */
+	outpw(FM_A(FM_EAA0),smc->hw.fp.fifo.rx2_fifo_start-1) ;	/* EAA0 */
+
+	/*
+	 * initialize the pointer for synchronous transmit queue
+	 */
+	if (smc->hw.fp.fifo.tx_s_size) {
+		outpw(FM_A(FM_RPXS),smc->hw.fp.fifo.tx_s_start) ;
+		outpw(FM_A(FM_SWPXS),smc->hw.fp.fifo.tx_s_start) ;
+		outpw(FM_A(FM_WPXS),smc->hw.fp.fifo.tx_s_start) ;
+		outpw(FM_A(FM_EAS),smc->hw.fp.fifo.tx_a0_start-1) ;
+	}
+	else {
+		outpw(FM_A(FM_RPXS),smc->hw.fp.fifo.tx_a0_start-1) ;
+		outpw(FM_A(FM_SWPXS),smc->hw.fp.fifo.tx_a0_start-1) ;
+		outpw(FM_A(FM_WPXS),smc->hw.fp.fifo.tx_a0_start-1) ;
+		outpw(FM_A(FM_EAS),smc->hw.fp.fifo.tx_a0_start-1) ;
+	}
+}
+
+/*
+ * init memory buffer management registers
+ */
+static void init_rbc(struct s_smc *smc)
+{
+	u_short	rbc_ram_addr ;
+
+	/*
+	 * set unused pointers or permanent pointers
+	 */
+	rbc_ram_addr = smc->hw.fp.fifo.rx2_fifo_start - 1 ;
+
+	outpw(FM_A(FM_RPXA1),rbc_ram_addr) ;	/* a1-send pointer */
+	outpw(FM_A(FM_WPXA1),rbc_ram_addr) ;
+	outpw(FM_A(FM_SWPXA1),rbc_ram_addr) ;
+	outpw(FM_A(FM_EAA1),rbc_ram_addr) ;
+
+	set_recvptr(smc) ;
+	set_txptr(smc) ;
+}
+
+/*
+ * init rx pointer
+ */
+static void init_rx(struct s_smc *smc)
+{
+	struct s_smt_rx_queue	*queue ;
+
+	/*
+	 * init all tx data structures for receive queue 1
+	 */
+	smc->hw.fp.rx[QUEUE_R1] = queue = &smc->hw.fp.rx_q[QUEUE_R1] ;
+	queue->rx_bmu_ctl = (HW_PTR) ADDR(B0_R1_CSR) ;
+	queue->rx_bmu_dsc = (HW_PTR) ADDR(B4_R1_DA) ;
+
+	/*
+	 * init all tx data structures for receive queue 2
+	 */
+	smc->hw.fp.rx[QUEUE_R2] = queue = &smc->hw.fp.rx_q[QUEUE_R2] ;
+	queue->rx_bmu_ctl = (HW_PTR) ADDR(B0_R2_CSR) ;
+	queue->rx_bmu_dsc = (HW_PTR) ADDR(B4_R2_DA) ;
+}
+
+/*
+ * set the TSYNC register of the FORMAC to regulate synchronous transmission
+ */
+void set_formac_tsync(struct s_smc *smc, long sync_bw)
+{
+	outpw(FM_A(FM_TSYNC),(unsigned int) (((-sync_bw) >> 5) & 0xffff) ) ;
+}
+
+/*
+ * init all tx data structures
+ */
+static void init_tx(struct s_smc *smc)
+{
+	struct s_smt_tx_queue	*queue ;
+
+	/*
+	 * init all tx data structures for the synchronous queue
+	 */
+	smc->hw.fp.tx[QUEUE_S] = queue = &smc->hw.fp.tx_q[QUEUE_S] ;
+	queue->tx_bmu_ctl = (HW_PTR) ADDR(B0_XS_CSR) ;
+	queue->tx_bmu_dsc = (HW_PTR) ADDR(B5_XS_DA) ;
+
+#ifdef ESS
+	set_formac_tsync(smc,smc->ess.sync_bw) ;
+#endif
+
+	/*
+	 * init all tx data structures for the asynchronous queue 0
+	 */
+	smc->hw.fp.tx[QUEUE_A0] = queue = &smc->hw.fp.tx_q[QUEUE_A0] ;
+	queue->tx_bmu_ctl = (HW_PTR) ADDR(B0_XA_CSR) ;
+	queue->tx_bmu_dsc = (HW_PTR) ADDR(B5_XA_DA) ;
+
+
+	llc_recover_tx(smc) ;
+}
+
+static void mac_counter_init(struct s_smc *smc)
+{
+	int i ;
+	u_long *ec ;
+
+	/*
+	 * clear FORMAC+ frame-, lost- and error counter
+	 */
+	outpw(FM_A(FM_FCNTR),0) ;
+	outpw(FM_A(FM_LCNTR),0) ;
+	outpw(FM_A(FM_ECNTR),0) ;
+	/*
+	 * clear internal error counter structure
+	 */
+	ec = (u_long *)&smc->hw.fp.err_stats ;
+	for (i = (sizeof(struct err_st)/sizeof(long)) ; i ; i--)
+		*ec++ = 0L ;
+	smc->mib.m[MAC0].fddiMACRingOp_Ct = 0 ;
+}
+
+/*
+ * set FORMAC address, and t_request
+ */
+static	void set_formac_addr(struct s_smc *smc)
+{
+	long	t_requ = smc->mib.m[MAC0].fddiMACT_Req ;
+
+	outpw(FM_A(FM_SAID),my_said) ;	/* set short address */
+	outpw(FM_A(FM_LAIL),(unsigned)((smc->hw.fddi_home_addr.a[4]<<8) +
+					smc->hw.fddi_home_addr.a[5])) ;
+	outpw(FM_A(FM_LAIC),(unsigned)((smc->hw.fddi_home_addr.a[2]<<8) +
+					smc->hw.fddi_home_addr.a[3])) ;
+	outpw(FM_A(FM_LAIM),(unsigned)((smc->hw.fddi_home_addr.a[0]<<8) +
+					smc->hw.fddi_home_addr.a[1])) ;
+
+	outpw(FM_A(FM_SAGP),my_sagp) ;	/* set short group address */
+
+	outpw(FM_A(FM_LAGL),(unsigned)((smc->hw.fp.group_addr.a[4]<<8) +
+					smc->hw.fp.group_addr.a[5])) ;
+	outpw(FM_A(FM_LAGC),(unsigned)((smc->hw.fp.group_addr.a[2]<<8) +
+					smc->hw.fp.group_addr.a[3])) ;
+	outpw(FM_A(FM_LAGM),(unsigned)((smc->hw.fp.group_addr.a[0]<<8) +
+					smc->hw.fp.group_addr.a[1])) ;
+
+	/* set r_request regs. (MSW & LSW of TRT ) */
+	outpw(FM_A(FM_TREQ1),(unsigned)(t_requ>>16)) ;
+	outpw(FM_A(FM_TREQ0),(unsigned)t_requ) ;
+}
+
+static void set_int(char *p, int l)
+{
+	p[0] = (char)(l >> 24) ;
+	p[1] = (char)(l >> 16) ;
+	p[2] = (char)(l >> 8) ;
+	p[3] = (char)(l >> 0) ;
+}
+
+/*
+ * copy TX descriptor to buffer mem
+ * append FC field and MAC frame
+ * if more bit is set in descr
+ *	append pointer to descriptor (endless loop)
+ * else
+ *	append 'end of chain' pointer
+ */
+static void copy_tx_mac(struct s_smc *smc, u_long td, struct fddi_mac *mac,
+			unsigned off, int len)
+/* u_long td;		 transmit descriptor */
+/* struct fddi_mac *mac; mac frame pointer */
+/* unsigned off;	 start address within buffer memory */
+/* int len ;		 length of the frame including the FC */
+{
+	int	i ;
+	__le32	*p ;
+
+	CHECK_NPP() ;
+	MARW(off) ;		/* set memory address reg for writes */
+
+	p = (__le32 *) mac ;
+	for (i = (len + 3)/4 ; i ; i--) {
+		if (i == 1) {
+			/* last word, set the tag bit */
+			outpw(FM_A(FM_CMDREG2),FM_ISTTB) ;
+		}
+		write_mdr(smc,le32_to_cpu(*p)) ;
+		p++ ;
+	}
+
+	outpw(FM_A(FM_CMDREG2),FM_ISTTB) ;	/* set the tag bit */
+	write_mdr(smc,td) ;	/* write over memory data reg to buffer */
+}
+
+/*
+	BEGIN_MANUAL_ENTRY(module;tests;3)
+	How to test directed beacon frames
+	----------------------------------------------------------------
+
+	o Insert a break point in the function build_claim_beacon()
+	  before calling copy_tx_mac() for building the claim frame.
+	o Modify the RM3_DETECT case so that the RM6_DETECT state
+	  will always entered from the RM3_DETECT state (function rmt_fsm(),
+	  rmt.c)
+	o Compile the driver.
+	o Set the parameter TREQ in the protocol.ini or net.cfg to a
+	  small value to make sure your station will win the claim
+	  process.
+	o Start the driver.
+	o When you reach the break point, modify the SA and DA address
+	  of the claim frame (e.g. SA = DA = 10005affffff).
+	o When you see RM3_DETECT and RM6_DETECT, observe the direct
+	  beacon frames on the UPPSLANA.
+
+	END_MANUAL_ENTRY
+ */
+static void directed_beacon(struct s_smc *smc)
+{
+	SK_LOC_DECL(__le32,a[2]) ;
+
+	/*
+	 * set UNA in frame
+	 * enable FORMAC to send endless queue of directed beacon
+	 * important: the UNA starts at byte 1 (not at byte 0)
+	 */
+	* (char *) a = (char) ((long)DBEACON_INFO<<24L) ;
+	a[1] = 0 ;
+	memcpy((char *)a+1,(char *) &smc->mib.m[MAC0].fddiMACUpstreamNbr,6) ;
+
+	CHECK_NPP() ;
+	 /* set memory address reg for writes */
+	MARW(smc->hw.fp.fifo.rbc_ram_start+DBEACON_FRAME_OFF+4) ;
+	write_mdr(smc,le32_to_cpu(a[0])) ;
+	outpw(FM_A(FM_CMDREG2),FM_ISTTB) ;	/* set the tag bit */
+	write_mdr(smc,le32_to_cpu(a[1])) ;
+
+	outpw(FM_A(FM_SABC),smc->hw.fp.fifo.rbc_ram_start + DBEACON_FRAME_OFF) ;
+}
+
+/*
+	setup claim & beacon pointer
+	NOTE :
+		special frame packets end with a pointer to their own
+		descriptor, and the MORE bit is set in the descriptor
+*/
+static void build_claim_beacon(struct s_smc *smc, u_long t_request)
+{
+	u_int	td ;
+	int	len ;
+	struct fddi_mac_sf *mac ;
+
+	/*
+	 * build claim packet
+	 */
+	len = 17 ;
+	td = TX_DESCRIPTOR | ((((u_int)len-1)&3)<<27) ;
+	mac = &smc->hw.fp.mac_sfb ;
+	mac->mac_fc = FC_CLAIM ;
+	/* DA == SA in claim frame */
+	mac->mac_source = mac->mac_dest = MA ;
+	/* 2's complement */
+	set_int((char *)mac->mac_info,(int)t_request) ;
+
+	copy_tx_mac(smc,td,(struct fddi_mac *)mac,
+		smc->hw.fp.fifo.rbc_ram_start + CLAIM_FRAME_OFF,len) ;
+	/* set CLAIM start pointer */
+	outpw(FM_A(FM_SACL),smc->hw.fp.fifo.rbc_ram_start + CLAIM_FRAME_OFF) ;
+
+	/*
+	 * build beacon packet
+	 */
+	len = 17 ;
+	td = TX_DESCRIPTOR | ((((u_int)len-1)&3)<<27) ;
+	mac->mac_fc = FC_BEACON ;
+	mac->mac_source = MA ;
+	mac->mac_dest = null_addr ;		/* DA == 0 in beacon frame */
+	set_int((char *) mac->mac_info,((int)BEACON_INFO<<24) + 0 ) ;
+
+	copy_tx_mac(smc,td,(struct fddi_mac *)mac,
+		smc->hw.fp.fifo.rbc_ram_start + BEACON_FRAME_OFF,len) ;
+	/* set beacon start pointer */
+	outpw(FM_A(FM_SABC),smc->hw.fp.fifo.rbc_ram_start + BEACON_FRAME_OFF) ;
+
+	/*
+	 * build directed beacon packet
+	 * contains optional UNA
+	 */
+	len = 23 ;
+	td = TX_DESCRIPTOR | ((((u_int)len-1)&3)<<27) ;
+	mac->mac_fc = FC_BEACON ;
+	mac->mac_source = MA ;
+	mac->mac_dest = dbeacon_multi ;		/* multicast */
+	set_int((char *) mac->mac_info,((int)DBEACON_INFO<<24) + 0 ) ;
+	set_int((char *) mac->mac_info+4,0) ;
+	set_int((char *) mac->mac_info+8,0) ;
+
+	copy_tx_mac(smc,td,(struct fddi_mac *)mac,
+		smc->hw.fp.fifo.rbc_ram_start + DBEACON_FRAME_OFF,len) ;
+
+	/* end of claim/beacon queue */
+	outpw(FM_A(FM_EACB),smc->hw.fp.fifo.rx1_fifo_start-1) ;
+
+	outpw(FM_A(FM_WPXSF),0) ;
+	outpw(FM_A(FM_RPXSF),0) ;
+}
+
+static void formac_rcv_restart(struct s_smc *smc)
+{
+	/* enable receive function */
+	SETMASK(FM_A(FM_MDREG1),smc->hw.fp.rx_mode,FM_ADDRX) ;
+
+	outpw(FM_A(FM_CMDREG1),FM_ICLLR) ;	/* clear receive lock */
+}
+
+void formac_tx_restart(struct s_smc *smc)
+{
+	outpw(FM_A(FM_CMDREG1),FM_ICLLS) ;	/* clear s-frame lock */
+	outpw(FM_A(FM_CMDREG1),FM_ICLLA0) ;	/* clear a-frame lock */
+}
+
+static void enable_formac(struct s_smc *smc)
+{
+	/* set formac IMSK : 0 enables irq */
+	outpw(FM_A(FM_IMSK1U),(unsigned short)~mac_imsk1u);
+	outpw(FM_A(FM_IMSK1L),(unsigned short)~mac_imsk1l);
+	outpw(FM_A(FM_IMSK2U),(unsigned short)~mac_imsk2u);
+	outpw(FM_A(FM_IMSK2L),(unsigned short)~mac_imsk2l);
+	outpw(FM_A(FM_IMSK3U),(unsigned short)~mac_imsk3u);
+	outpw(FM_A(FM_IMSK3L),(unsigned short)~mac_imsk3l);
+}
+
+#if 0	/* Removed because the driver should use the ASICs TX complete IRQ. */
+	/* The FORMACs tx complete IRQ should be used any longer */
+
+/*
+	BEGIN_MANUAL_ENTRY(if,func;others;4)
+
+	void enable_tx_irq(smc, queue)
+	struct s_smc *smc ;
+	u_short	queue ;
+
+Function	DOWNCALL	(SMT, fplustm.c)
+		enable_tx_irq() enables the FORMACs transmit complete
+		interrupt of the queue.
+
+Para	queue	= QUEUE_S:	synchronous queue
+		= QUEUE_A0:	asynchronous queue
+
+Note	After any ring operational change the transmit complete
+	interrupts are disabled.
+	The operating system dependent module must enable
+	the transmit complete interrupt of a queue,
+		- when it queues the first frame,
+		  because of no transmit resources are beeing
+		  available and
+		- when it escapes from the function llc_restart_tx
+		  while some frames are still queued.
+
+	END_MANUAL_ENTRY
+ */
+void enable_tx_irq(struct s_smc *smc, u_short queue)
+/* u_short queue; 0 = synchronous queue, 1 = asynchronous queue 0 */
+{
+	u_short	imask ;
+
+	imask = ~(inpw(FM_A(FM_IMSK1U))) ;
+
+	if (queue == 0) {
+		outpw(FM_A(FM_IMSK1U),~(imask|FM_STEFRMS)) ;
+	}
+	if (queue == 1) {
+		outpw(FM_A(FM_IMSK1U),~(imask|FM_STEFRMA0)) ;
+	}
+}
+
+/*
+	BEGIN_MANUAL_ENTRY(if,func;others;4)
+
+	void disable_tx_irq(smc, queue)
+	struct s_smc *smc ;
+	u_short	queue ;
+
+Function	DOWNCALL	(SMT, fplustm.c)
+		disable_tx_irq disables the FORMACs transmit complete
+		interrupt of the queue
+
+Para	queue	= QUEUE_S:	synchronous queue
+		= QUEUE_A0:	asynchronous queue
+
+Note	The operating system dependent module should disable
+	the transmit complete interrupts if it escapes from the
+	function llc_restart_tx and no frames are queued.
+
+	END_MANUAL_ENTRY
+ */
+void disable_tx_irq(struct s_smc *smc, u_short queue)
+/* u_short queue; 0 = synchronous queue, 1 = asynchronous queue 0 */
+{
+	u_short	imask ;
+
+	imask = ~(inpw(FM_A(FM_IMSK1U))) ;
+
+	if (queue == 0) {
+		outpw(FM_A(FM_IMSK1U),~(imask&~FM_STEFRMS)) ;
+	}
+	if (queue == 1) {
+		outpw(FM_A(FM_IMSK1U),~(imask&~FM_STEFRMA0)) ;
+	}
+}
+#endif
+
+static void disable_formac(struct s_smc *smc)
+{
+	/* clear formac IMSK : 1 disables irq */
+	outpw(FM_A(FM_IMSK1U),MW) ;
+	outpw(FM_A(FM_IMSK1L),MW) ;
+	outpw(FM_A(FM_IMSK2U),MW) ;
+	outpw(FM_A(FM_IMSK2L),MW) ;
+	outpw(FM_A(FM_IMSK3U),MW) ;
+	outpw(FM_A(FM_IMSK3L),MW) ;
+}
+
+
+static void mac_ring_up(struct s_smc *smc, int up)
+{
+	if (up) {
+		formac_rcv_restart(smc) ;	/* enable receive function */
+		smc->hw.mac_ring_is_up = TRUE ;
+		llc_restart_tx(smc) ;		/* TX queue */
+	}
+	else {
+		/* disable receive function */
+		SETMASK(FM_A(FM_MDREG1),FM_MDISRCV,FM_ADDET) ;
+
+		/* abort current transmit activity */
+		outpw(FM_A(FM_CMDREG2),FM_IACTR) ;
+
+		smc->hw.mac_ring_is_up = FALSE ;
+	}
+}
+
+/*--------------------------- ISR handling ----------------------------------*/
+/*
+ * mac1_irq is in drvfbi.c
+ */
+
+/*
+ * mac2_irq:	status bits for the receive queue 1, and ring status
+ * 		ring status indication bits
+ */
+void mac2_irq(struct s_smc *smc, u_short code_s2u, u_short code_s2l)
+{
+	u_short	change_s2l ;
+	u_short	change_s2u ;
+
+	/* (jd) 22-Feb-1999
+	 * Restart 2_DMax Timer after end of claiming or beaconing
+	 */
+	if (code_s2u & (FM_SCLM|FM_SHICLM|FM_SBEC|FM_SOTRBEC)) {
+		queue_event(smc,EVENT_RMT,RM_TX_STATE_CHANGE) ;
+	}
+	else if (code_s2l & (FM_STKISS)) {
+		queue_event(smc,EVENT_RMT,RM_TX_STATE_CHANGE) ;
+	}
+
+	/*
+	 * XOR current st bits with the last to avoid useless RMT event queuing
+	 */
+	change_s2l = smc->hw.fp.s2l ^ code_s2l ;
+	change_s2u = smc->hw.fp.s2u ^ code_s2u ;
+
+	if ((change_s2l & FM_SRNGOP) ||
+		(!smc->hw.mac_ring_is_up && ((code_s2l & FM_SRNGOP)))) {
+		if (code_s2l & FM_SRNGOP) {
+			mac_ring_up(smc,1) ;
+			queue_event(smc,EVENT_RMT,RM_RING_OP) ;
+			smc->mib.m[MAC0].fddiMACRingOp_Ct++ ;
+		}
+		else {
+			mac_ring_up(smc,0) ;
+			queue_event(smc,EVENT_RMT,RM_RING_NON_OP) ;
+		}
+		goto mac2_end ;
+	}
+	if (code_s2l & FM_SMISFRM) {	/* missed frame */
+		smc->mib.m[MAC0].fddiMACNotCopied_Ct++ ;
+	}
+	if (code_s2u & (FM_SRCVOVR |	/* recv. FIFO overflow */
+			FM_SRBFL)) {	/* recv. buffer full */
+		smc->hw.mac_ct.mac_r_restart_counter++ ;
+/*		formac_rcv_restart(smc) ;	*/
+		smt_stat_counter(smc,1) ;
+/*		goto mac2_end ;			*/
+	}
+	if (code_s2u & FM_SOTRBEC)
+		queue_event(smc,EVENT_RMT,RM_OTHER_BEACON) ;
+	if (code_s2u & FM_SMYBEC)
+		queue_event(smc,EVENT_RMT,RM_MY_BEACON) ;
+	if (change_s2u & code_s2u & FM_SLOCLM) {
+		DB_RMTN(2,"RMT : lower claim received\n",0,0) ;
+	}
+	if ((code_s2u & FM_SMYCLM) && !(code_s2l & FM_SDUPCLM)) {
+		/*
+		 * This is my claim and that claim is not detected as a
+		 * duplicate one.
+		 */
+		queue_event(smc,EVENT_RMT,RM_MY_CLAIM) ;
+	}
+	if (code_s2l & FM_SDUPCLM) {
+		/*
+		 * If a duplicate claim frame (same SA but T_Bid != T_Req)
+		 * this flag will be set.
+		 * In the RMT state machine we need a RM_VALID_CLAIM event
+		 * to do the appropriate state change.
+		 * RM(34c)
+		 */
+		queue_event(smc,EVENT_RMT,RM_VALID_CLAIM) ;
+	}
+	if (change_s2u & code_s2u & FM_SHICLM) {
+		DB_RMTN(2,"RMT : higher claim received\n",0,0) ;
+	}
+	if ( (code_s2l & FM_STRTEXP) ||
+	     (code_s2l & FM_STRTEXR) )
+		queue_event(smc,EVENT_RMT,RM_TRT_EXP) ;
+	if (code_s2l & FM_SMULTDA) {
+		/*
+		 * The MAC has found a 2. MAC with the same address.
+		 * Signal dup_addr_test = failed to RMT state machine.
+		 * RM(25)
+		 */
+		smc->r.dup_addr_test = DA_FAILED ;
+		queue_event(smc,EVENT_RMT,RM_DUP_ADDR) ;
+	}
+	if (code_s2u & FM_SBEC)
+		smc->hw.fp.err_stats.err_bec_stat++ ;
+	if (code_s2u & FM_SCLM)
+		smc->hw.fp.err_stats.err_clm_stat++ ;
+	if (code_s2l & FM_STVXEXP)
+		smc->mib.m[MAC0].fddiMACTvxExpired_Ct++ ;
+	if ((code_s2u & (FM_SBEC|FM_SCLM))) {
+		if (!(change_s2l & FM_SRNGOP) && (smc->hw.fp.s2l & FM_SRNGOP)) {
+			mac_ring_up(smc,0) ;
+			queue_event(smc,EVENT_RMT,RM_RING_NON_OP) ;
+
+			mac_ring_up(smc,1) ;
+			queue_event(smc,EVENT_RMT,RM_RING_OP) ;
+			smc->mib.m[MAC0].fddiMACRingOp_Ct++ ;
+		}
+	}
+	if (code_s2l & FM_SPHINV)
+		smc->hw.fp.err_stats.err_phinv++ ;
+	if (code_s2l & FM_SSIFG)
+		smc->hw.fp.err_stats.err_sifg_det++ ;
+	if (code_s2l & FM_STKISS)
+		smc->hw.fp.err_stats.err_tkiss++ ;
+	if (code_s2l & FM_STKERR)
+		smc->hw.fp.err_stats.err_tkerr++ ;
+	if (code_s2l & FM_SFRMCTR)
+		smc->mib.m[MAC0].fddiMACFrame_Ct += 0x10000L ;
+	if (code_s2l & FM_SERRCTR)
+		smc->mib.m[MAC0].fddiMACError_Ct += 0x10000L ;
+	if (code_s2l & FM_SLSTCTR)
+		smc->mib.m[MAC0].fddiMACLost_Ct  += 0x10000L ;
+	if (code_s2u & FM_SERRSF) {
+		SMT_PANIC(smc,SMT_E0114, SMT_E0114_MSG) ;
+	}
+mac2_end:
+	/* notice old status */
+	smc->hw.fp.s2l = code_s2l ;
+	smc->hw.fp.s2u = code_s2u ;
+	outpw(FM_A(FM_IMSK2U),~mac_imsk2u) ;
+}
+
+/*
+ * mac3_irq:	receive queue 2 bits and address detection bits
+ */
+void mac3_irq(struct s_smc *smc, u_short code_s3u, u_short code_s3l)
+{
+	UNUSED(code_s3l) ;
+
+	if (code_s3u & (FM_SRCVOVR2 |	/* recv. FIFO overflow */
+			FM_SRBFL2)) {	/* recv. buffer full */
+		smc->hw.mac_ct.mac_r_restart_counter++ ;
+		smt_stat_counter(smc,1);
+	}
+
+
+	if (code_s3u & FM_SRPERRQ2) {	/* parity error receive queue 2 */
+		SMT_PANIC(smc,SMT_E0115, SMT_E0115_MSG) ;
+	}
+	if (code_s3u & FM_SRPERRQ1) {	/* parity error receive queue 2 */
+		SMT_PANIC(smc,SMT_E0116, SMT_E0116_MSG) ;
+	}
+}
+
+
+/*
+ * take formac offline
+ */
+static void formac_offline(struct s_smc *smc)
+{
+	outpw(FM_A(FM_CMDREG2),FM_IACTR) ;/* abort current transmit activity */
+
+	/* disable receive function */
+	SETMASK(FM_A(FM_MDREG1),FM_MDISRCV,FM_ADDET) ;
+
+	/* FORMAC+ 'Initialize Mode' */
+	SETMASK(FM_A(FM_MDREG1),FM_MINIT,FM_MMODE) ;
+
+	disable_formac(smc) ;
+	smc->hw.mac_ring_is_up = FALSE ;
+	smc->hw.hw_state = STOPPED ;
+}
+
+/*
+ * bring formac online
+ */
+static void formac_online(struct s_smc *smc)
+{
+	enable_formac(smc) ;
+	SETMASK(FM_A(FM_MDREG1),FM_MONLINE | FM_SELRA | MDR1INIT |
+		smc->hw.fp.rx_mode, FM_MMODE | FM_SELRA | FM_ADDRX) ;
+}
+
+/*
+ * FORMAC+ full init. (tx, rx, timer, counter, claim & beacon)
+ */
+int init_fplus(struct s_smc *smc)
+{
+	smc->hw.fp.nsa_mode = FM_MRNNSAFNMA ;
+	smc->hw.fp.rx_mode = FM_MDAMA ;
+	smc->hw.fp.group_addr = fddi_broadcast ;
+	smc->hw.fp.func_addr = 0 ;
+	smc->hw.fp.frselreg_init = 0 ;
+
+	init_driver_fplus(smc) ;
+	if (smc->s.sas == SMT_DAS)
+		smc->hw.fp.mdr3init |= FM_MENDAS ;
+
+	smc->hw.mac_ct.mac_nobuf_counter = 0 ;
+	smc->hw.mac_ct.mac_r_restart_counter = 0 ;
+
+	smc->hw.fp.fm_st1u = (HW_PTR) ADDR(B0_ST1U) ;
+	smc->hw.fp.fm_st1l = (HW_PTR) ADDR(B0_ST1L) ;
+	smc->hw.fp.fm_st2u = (HW_PTR) ADDR(B0_ST2U) ;
+	smc->hw.fp.fm_st2l = (HW_PTR) ADDR(B0_ST2L) ;
+	smc->hw.fp.fm_st3u = (HW_PTR) ADDR(B0_ST3U) ;
+	smc->hw.fp.fm_st3l = (HW_PTR) ADDR(B0_ST3L) ;
+
+	smc->hw.fp.s2l = smc->hw.fp.s2u = 0 ;
+	smc->hw.mac_ring_is_up = 0 ;
+
+	mac_counter_init(smc) ;
+
+	/* convert BCKL units to symbol time */
+	smc->hw.mac_pa.t_neg = (u_long)0 ;
+	smc->hw.mac_pa.t_pri = (u_long)0 ;
+
+	/* make sure all PCI settings are correct */
+	mac_do_pci_fix(smc) ;
+
+	return init_mac(smc, 1);
+	/* enable_formac(smc) ; */
+}
+
+static int init_mac(struct s_smc *smc, int all)
+{
+	u_short	t_max,x ;
+	u_long	time=0 ;
+
+	/*
+	 * clear memory
+	 */
+	outpw(FM_A(FM_MDREG1),FM_MINIT) ;	/* FORMAC+ init mode */
+	set_formac_addr(smc) ;
+	outpw(FM_A(FM_MDREG1),FM_MMEMACT) ;	/* FORMAC+ memory activ mode */
+	/* Note: Mode register 2 is set here, incase parity is enabled. */
+	outpw(FM_A(FM_MDREG2),smc->hw.fp.mdr2init) ;
+
+	if (all) {
+		init_ram(smc) ;
+	}
+	else {
+		/*
+		 * reset the HPI, the Master and the BMUs
+		 */
+		outp(ADDR(B0_CTRL), CTRL_HPI_SET) ;
+		time = hwt_quick_read(smc) ;
+	}
+
+	/*
+	 * set all pointers, frames etc
+	 */
+	smt_split_up_fifo(smc) ;
+
+	init_tx(smc) ;
+	init_rx(smc) ;
+	init_rbc(smc) ;
+
+	build_claim_beacon(smc,smc->mib.m[MAC0].fddiMACT_Req) ;
+
+	/* set RX threshold */
+	/* see Errata #SN2 Phantom receive overflow */
+	outpw(FM_A(FM_FRMTHR),14<<12) ;		/* switch on */
+
+	/* set formac work mode */
+	outpw(FM_A(FM_MDREG1),MDR1INIT | FM_SELRA | smc->hw.fp.rx_mode) ;
+	outpw(FM_A(FM_MDREG2),smc->hw.fp.mdr2init) ;
+	outpw(FM_A(FM_MDREG3),smc->hw.fp.mdr3init) ;
+	outpw(FM_A(FM_FRSELREG),smc->hw.fp.frselreg_init) ;
+
+	/* set timer */
+	/*
+	 * errata #22 fplus:
+	 * T_MAX must not be FFFE
+	 * or one of FFDF, FFB8, FF91 (-0x27 etc..)
+	 */
+	t_max = (u_short)(smc->mib.m[MAC0].fddiMACT_Max/32) ;
+	x = t_max/0x27 ;
+	x *= 0x27 ;
+	if ((t_max == 0xfffe) || (t_max - x == 0x16))
+		t_max-- ;
+	outpw(FM_A(FM_TMAX),(u_short)t_max) ;
+
+	/* BugFix for report #10204 */
+	if (smc->mib.m[MAC0].fddiMACTvxValue < (u_long) (- US2BCLK(52))) {
+		outpw(FM_A(FM_TVX), (u_short) (- US2BCLK(52))/255 & MB) ;
+	} else {
+		outpw(FM_A(FM_TVX),
+			(u_short)((smc->mib.m[MAC0].fddiMACTvxValue/255) & MB)) ;
+	}
+
+	outpw(FM_A(FM_CMDREG1),FM_ICLLS) ;	/* clear s-frame lock */
+	outpw(FM_A(FM_CMDREG1),FM_ICLLA0) ;	/* clear a-frame lock */
+	outpw(FM_A(FM_CMDREG1),FM_ICLLR);	/* clear receive lock */
+
+	/* Auto unlock receice threshold for receive queue 1 and 2 */
+	outpw(FM_A(FM_UNLCKDLY),(0xff|(0xff<<8))) ;
+
+	rtm_init(smc) ;				/* RT-Monitor */
+
+	if (!all) {
+		/*
+		 * after 10ms, reset the BMUs and repair the rings
+		 */
+		hwt_wait_time(smc,time,MS2BCLK(10)) ;
+		outpd(ADDR(B0_R1_CSR),CSR_SET_RESET) ;
+		outpd(ADDR(B0_XA_CSR),CSR_SET_RESET) ;
+		outpd(ADDR(B0_XS_CSR),CSR_SET_RESET) ;
+		outp(ADDR(B0_CTRL), CTRL_HPI_CLR) ;
+		outpd(ADDR(B0_R1_CSR),CSR_CLR_RESET) ;
+		outpd(ADDR(B0_XA_CSR),CSR_CLR_RESET) ;
+		outpd(ADDR(B0_XS_CSR),CSR_CLR_RESET) ;
+		if (!smc->hw.hw_is_64bit) {
+			outpd(ADDR(B4_R1_F), RX_WATERMARK) ;
+			outpd(ADDR(B5_XA_F), TX_WATERMARK) ;
+			outpd(ADDR(B5_XS_F), TX_WATERMARK) ;
+		}
+		smc->hw.hw_state = STOPPED ;
+		mac_drv_repair_descr(smc) ;
+	}
+	smc->hw.hw_state = STARTED ;
+
+	return 0;
+}
+
+
+/*
+ * called by CFM
+ */
+void config_mux(struct s_smc *smc, int mux)
+{
+	plc_config_mux(smc,mux) ;
+
+	SETMASK(FM_A(FM_MDREG1),FM_SELRA,FM_SELRA) ;
+}
+
+/*
+ * called by RMT
+ * enable CLAIM/BEACON interrupts
+ * (only called if these events are of interest, e.g. in DETECT state
+ * the interrupt must not be permanently enabled
+ * RMT calls this function periodically (timer driven polling)
+ */
+void sm_mac_check_beacon_claim(struct s_smc *smc)
+{
+	/* set formac IMSK : 0 enables irq */
+	outpw(FM_A(FM_IMSK2U),~(mac_imsk2u | mac_beacon_imsk2u)) ;
+	/* the driver must receive the directed beacons */
+	formac_rcv_restart(smc) ;
+	process_receive(smc) ;
+}
+
+/*-------------------------- interface functions ----------------------------*/
+/*
+ * control MAC layer	(called by RMT)
+ */
+void sm_ma_control(struct s_smc *smc, int mode)
+{
+	switch(mode) {
+	case MA_OFFLINE :
+		/* Add to make the MAC offline in RM0_ISOLATED state */
+		formac_offline(smc) ;
+		break ;
+	case MA_RESET :
+		(void)init_mac(smc,0) ;
+		break ;
+	case MA_BEACON :
+		formac_online(smc) ;
+		break ;
+	case MA_DIRECTED :
+		directed_beacon(smc) ;
+		break ;
+	case MA_TREQ :
+		/*
+		 * no actions necessary, TREQ is already set
+		 */
+		break ;
+	}
+}
+
+int sm_mac_get_tx_state(struct s_smc *smc)
+{
+	return (inpw(FM_A(FM_STMCHN))>>4) & 7;
+}
+
+/*
+ * multicast functions
+ */
+
+static struct s_fpmc* mac_get_mc_table(struct s_smc *smc,
+				       struct fddi_addr *user,
+				       struct fddi_addr *own,
+				       int del, int can)
+{
+	struct s_fpmc	*tb ;
+	struct s_fpmc	*slot ;
+	u_char	*p ;
+	int i ;
+
+	/*
+	 * set own = can(user)
+	 */
+	*own = *user ;
+	if (can) {
+		p = own->a ;
+		for (i = 0 ; i < 6 ; i++, p++)
+			*p = bitrev8(*p);
+	}
+	slot = NULL;
+	for (i = 0, tb = smc->hw.fp.mc.table ; i < FPMAX_MULTICAST ; i++, tb++){
+		if (!tb->n) {		/* not used */
+			if (!del && !slot)	/* if !del save first free */
+				slot = tb ;
+			continue ;
+		}
+		if (memcmp((char *)&tb->a,(char *)own,6))
+			continue ;
+		return tb;
+	}
+	return slot;			/* return first free or NULL */
+}
+
+/*
+	BEGIN_MANUAL_ENTRY(if,func;others;2)
+
+	void mac_clear_multicast(smc)
+	struct s_smc *smc ;
+
+Function	DOWNCALL	(SMT, fplustm.c)
+		Clear all multicast entries
+
+	END_MANUAL_ENTRY()
+ */
+void mac_clear_multicast(struct s_smc *smc)
+{
+	struct s_fpmc	*tb ;
+	int i ;
+
+	smc->hw.fp.os_slots_used = 0 ;	/* note the SMT addresses */
+					/* will not be deleted */
+	for (i = 0, tb = smc->hw.fp.mc.table ; i < FPMAX_MULTICAST ; i++, tb++){
+		if (!tb->perm) {
+			tb->n = 0 ;
+		}
+	}
+}
+
+/*
+	BEGIN_MANUAL_ENTRY(if,func;others;2)
+
+	int mac_add_multicast(smc,addr,can)
+	struct s_smc *smc ;
+	struct fddi_addr *addr ;
+	int can ;
+
+Function	DOWNCALL	(SMC, fplustm.c)
+		Add an entry to the multicast table
+
+Para	addr	pointer to a multicast address
+	can	= 0:	the multicast address has the physical format
+		= 1:	the multicast address has the canonical format
+		| 0x80	permanent
+
+Returns	0: success
+	1: address table full
+
+Note	After a 'driver reset' or a 'station set address' all
+	entries of the multicast table are cleared.
+	In this case the driver has to fill the multicast table again.
+	After the operating system dependent module filled
+	the multicast table it must call mac_update_multicast
+	to activate the new multicast addresses!
+
+	END_MANUAL_ENTRY()
+ */
+int mac_add_multicast(struct s_smc *smc, struct fddi_addr *addr, int can)
+{
+	SK_LOC_DECL(struct fddi_addr,own) ;
+	struct s_fpmc	*tb ;
+
+	/*
+	 * check if there are free table entries
+	 */
+	if (can & 0x80) {
+		if (smc->hw.fp.smt_slots_used >= SMT_MAX_MULTI) {
+			return 1;
+		}
+	}
+	else {
+		if (smc->hw.fp.os_slots_used >= FPMAX_MULTICAST-SMT_MAX_MULTI) {
+			return 1;
+		}
+	}
+
+	/*
+	 * find empty slot
+	 */
+	if (!(tb = mac_get_mc_table(smc,addr,&own,0,can & ~0x80)))
+		return 1;
+	tb->n++ ;
+	tb->a = own ;
+	tb->perm = (can & 0x80) ? 1 : 0 ;
+
+	if (can & 0x80)
+		smc->hw.fp.smt_slots_used++ ;
+	else
+		smc->hw.fp.os_slots_used++ ;
+
+	return 0;
+}
+
+/*
+ * mode
+ */
+
+#define RX_MODE_PROM		0x1
+#define RX_MODE_ALL_MULTI	0x2
+
+/*
+	BEGIN_MANUAL_ENTRY(if,func;others;2)
+
+	void mac_update_multicast(smc)
+	struct s_smc *smc ;
+
+Function	DOWNCALL	(SMT, fplustm.c)
+		Update FORMAC multicast registers
+
+	END_MANUAL_ENTRY()
+ */
+void mac_update_multicast(struct s_smc *smc)
+{
+	struct s_fpmc	*tb ;
+	u_char	*fu ;
+	int	i ;
+
+	/*
+	 * invalidate the CAM
+	 */
+	outpw(FM_A(FM_AFCMD),FM_IINV_CAM) ;
+
+	/*
+	 * set the functional address
+	 */
+	if (smc->hw.fp.func_addr) {
+		fu = (u_char *) &smc->hw.fp.func_addr ;
+		outpw(FM_A(FM_AFMASK2),0xffff) ;
+		outpw(FM_A(FM_AFMASK1),(u_short) ~((fu[0] << 8) + fu[1])) ;
+		outpw(FM_A(FM_AFMASK0),(u_short) ~((fu[2] << 8) + fu[3])) ;
+		outpw(FM_A(FM_AFPERS),FM_VALID|FM_DA) ;
+		outpw(FM_A(FM_AFCOMP2), 0xc000) ;
+		outpw(FM_A(FM_AFCOMP1), 0x0000) ;
+		outpw(FM_A(FM_AFCOMP0), 0x0000) ;
+		outpw(FM_A(FM_AFCMD),FM_IWRITE_CAM) ;
+	}
+
+	/*
+	 * set the mask and the personality register(s)
+	 */
+	outpw(FM_A(FM_AFMASK0),0xffff) ;
+	outpw(FM_A(FM_AFMASK1),0xffff) ;
+	outpw(FM_A(FM_AFMASK2),0xffff) ;
+	outpw(FM_A(FM_AFPERS),FM_VALID|FM_DA) ;
+
+	for (i = 0, tb = smc->hw.fp.mc.table; i < FPMAX_MULTICAST; i++, tb++) {
+		if (tb->n) {
+			CHECK_CAM() ;
+
+			/*
+			 * write the multicast address into the CAM
+			 */
+			outpw(FM_A(FM_AFCOMP2),
+				(u_short)((tb->a.a[0]<<8)+tb->a.a[1])) ;
+			outpw(FM_A(FM_AFCOMP1),
+				(u_short)((tb->a.a[2]<<8)+tb->a.a[3])) ;
+			outpw(FM_A(FM_AFCOMP0),
+				(u_short)((tb->a.a[4]<<8)+tb->a.a[5])) ;
+			outpw(FM_A(FM_AFCMD),FM_IWRITE_CAM) ;
+		}
+	}
+}
+
+/*
+	BEGIN_MANUAL_ENTRY(if,func;others;3)
+
+	void mac_set_rx_mode(smc,mode)
+	struct s_smc *smc ;
+	int mode ;
+
+Function	DOWNCALL/INTERN	(SMT, fplustm.c)
+		This function enables / disables the selected receive.
+		Don't call this function if the hardware module is
+		used -- use mac_drv_rx_mode() instead of.
+
+Para	mode =	1	RX_ENABLE_ALLMULTI	enable all multicasts
+		2	RX_DISABLE_ALLMULTI	disable "enable all multicasts"
+		3	RX_ENABLE_PROMISC	enable promiscuous
+		4	RX_DISABLE_PROMISC	disable promiscuous
+		5	RX_ENABLE_NSA		enable reception of NSA frames
+		6	RX_DISABLE_NSA		disable reception of NSA frames
+
+Note	The selected receive modes will be lost after 'driver reset'
+	or 'set station address'
+
+	END_MANUAL_ENTRY
+ */
+void mac_set_rx_mode(struct s_smc *smc, int mode)
+{
+	switch (mode) {
+	case RX_ENABLE_ALLMULTI :
+		smc->hw.fp.rx_prom |= RX_MODE_ALL_MULTI ;
+		break ;
+	case RX_DISABLE_ALLMULTI :
+		smc->hw.fp.rx_prom &= ~RX_MODE_ALL_MULTI ;
+		break ;
+	case RX_ENABLE_PROMISC :
+		smc->hw.fp.rx_prom |= RX_MODE_PROM ;
+		break ;
+	case RX_DISABLE_PROMISC :
+		smc->hw.fp.rx_prom &= ~RX_MODE_PROM ;
+		break ;
+	case RX_ENABLE_NSA :
+		smc->hw.fp.nsa_mode = FM_MDAMA ;
+		smc->hw.fp.rx_mode = (smc->hw.fp.rx_mode & ~FM_ADDET) |
+			smc->hw.fp.nsa_mode ;
+		break ;
+	case RX_DISABLE_NSA :
+		smc->hw.fp.nsa_mode = FM_MRNNSAFNMA ;
+		smc->hw.fp.rx_mode = (smc->hw.fp.rx_mode & ~FM_ADDET) |
+			smc->hw.fp.nsa_mode ;
+		break ;
+	}
+	if (smc->hw.fp.rx_prom & RX_MODE_PROM) {
+		smc->hw.fp.rx_mode = FM_MLIMPROM ;
+	}
+	else if (smc->hw.fp.rx_prom & RX_MODE_ALL_MULTI) {
+		smc->hw.fp.rx_mode = smc->hw.fp.nsa_mode | FM_EXGPA0 ;
+	}
+	else
+		smc->hw.fp.rx_mode = smc->hw.fp.nsa_mode ;
+	SETMASK(FM_A(FM_MDREG1),smc->hw.fp.rx_mode,FM_ADDRX) ;
+	mac_update_multicast(smc) ;
+}
+
+/*
+	BEGIN_MANUAL_ENTRY(module;tests;3)
+	How to test the Restricted Token Monitor
+	----------------------------------------------------------------
+
+	o Insert a break point in the function rtm_irq()
+	o Remove all stations with a restricted token monitor from the
+	  network.
+	o Connect a UPPS ISA or EISA station to the network.
+	o Give the FORMAC of UPPS station the command to send
+	  restricted tokens until the ring becomes instable.
+	o Now connect your test test client.
+	o The restricted token monitor should detect the restricted token,
+	  and your break point will be reached.
+	o You can ovserve how the station will clean the ring.
+
+	END_MANUAL_ENTRY
+ */
+void rtm_irq(struct s_smc *smc)
+{
+	outpw(ADDR(B2_RTM_CRTL),TIM_CL_IRQ) ;		/* clear IRQ */
+	if (inpw(ADDR(B2_RTM_CRTL)) & TIM_RES_TOK) {
+		outpw(FM_A(FM_CMDREG1),FM_ICL) ;	/* force claim */
+		DB_RMT("RMT: fddiPATHT_Rmode expired\n",0,0) ;
+		AIX_EVENT(smc, (u_long) FDDI_RING_STATUS,
+				(u_long) FDDI_SMT_EVENT,
+				(u_long) FDDI_RTT, smt_get_event_word(smc));
+	}
+	outpw(ADDR(B2_RTM_CRTL),TIM_START) ;	/* enable RTM monitoring */
+}
+
+static void rtm_init(struct s_smc *smc)
+{
+	outpd(ADDR(B2_RTM_INI),0) ;		/* timer = 0 */
+	outpw(ADDR(B2_RTM_CRTL),TIM_START) ;	/* enable IRQ */
+}
+
+void rtm_set_timer(struct s_smc *smc)
+{
+	/*
+	 * MIB timer and hardware timer have the same resolution of 80nS
+	 */
+	DB_RMT("RMT: setting new fddiPATHT_Rmode, t = %d ns\n",
+		(int) smc->mib.a[PATH0].fddiPATHT_Rmode,0) ;
+	outpd(ADDR(B2_RTM_INI),smc->mib.a[PATH0].fddiPATHT_Rmode) ;
+}
+
+static void smt_split_up_fifo(struct s_smc *smc)
+{
+
+/*
+	BEGIN_MANUAL_ENTRY(module;mem;1)
+	-------------------------------------------------------------
+	RECEIVE BUFFER MEMORY DIVERSION
+	-------------------------------------------------------------
+
+	R1_RxD == SMT_R1_RXD_COUNT
+	R2_RxD == SMT_R2_RXD_COUNT
+
+	SMT_R1_RXD_COUNT must be unequal zero
+
+		   | R1_RxD R2_RxD |R1_RxD R2_RxD | R1_RxD R2_RxD
+		   |   x      0	   |  x	    1-3	  |   x     < 3
+	----------------------------------------------------------------------
+		   |   63,75 kB	   |    54,75	  |	R1_RxD
+	rx queue 1 | RX_FIFO_SPACE | RX_LARGE_FIFO| ------------- * 63,75 kB
+		   |		   |		  | R1_RxD+R2_RxD
+	----------------------------------------------------------------------
+		   |		   |    9 kB	  |     R2_RxD
+	rx queue 2 |	0 kB	   | RX_SMALL_FIFO| ------------- * 63,75 kB
+		   |  (not used)   |		  | R1_RxD+R2_RxD
+
+	END_MANUAL_ENTRY
+*/
+
+	if (SMT_R1_RXD_COUNT == 0) {
+		SMT_PANIC(smc,SMT_E0117, SMT_E0117_MSG) ;
+	}
+
+	switch(SMT_R2_RXD_COUNT) {
+	case 0:
+		smc->hw.fp.fifo.rx1_fifo_size = RX_FIFO_SPACE ;
+		smc->hw.fp.fifo.rx2_fifo_size = 0 ;
+		break ;
+	case 1:
+	case 2:
+	case 3:
+		smc->hw.fp.fifo.rx1_fifo_size = RX_LARGE_FIFO ;
+		smc->hw.fp.fifo.rx2_fifo_size = RX_SMALL_FIFO ;
+		break ;
+	default:	/* this is not the real defaule */
+		smc->hw.fp.fifo.rx1_fifo_size = RX_FIFO_SPACE *
+		SMT_R1_RXD_COUNT/(SMT_R1_RXD_COUNT+SMT_R2_RXD_COUNT) ;
+		smc->hw.fp.fifo.rx2_fifo_size = RX_FIFO_SPACE *
+		SMT_R2_RXD_COUNT/(SMT_R1_RXD_COUNT+SMT_R2_RXD_COUNT) ;
+		break ;
+	}
+
+/*
+	BEGIN_MANUAL_ENTRY(module;mem;1)
+	-------------------------------------------------------------
+	TRANSMIT BUFFER MEMORY DIVERSION
+	-------------------------------------------------------------
+
+
+		 | no sync bw	| sync bw available and | sync bw available and
+		 | available	| SynchTxMode = SPLIT	| SynchTxMode = ALL
+	-----------------------------------------------------------------------
+	sync tx	 |     0 kB	|	32 kB		|	55 kB
+	queue	 |		|   TX_MEDIUM_FIFO	|   TX_LARGE_FIFO
+	-----------------------------------------------------------------------
+	async tx |    64 kB	|	32 kB		|	 9 k
+	queue	 | TX_FIFO_SPACE|   TX_MEDIUM_FIFO	|   TX_SMALL_FIFO
+
+	END_MANUAL_ENTRY
+*/
+
+	/*
+	 * set the tx mode bits
+	 */
+	if (smc->mib.a[PATH0].fddiPATHSbaPayload) {
+#ifdef ESS
+		smc->hw.fp.fifo.fifo_config_mode |=
+			smc->mib.fddiESSSynchTxMode | SYNC_TRAFFIC_ON ;
+#endif
+	}
+	else {
+		smc->hw.fp.fifo.fifo_config_mode &=
+			~(SEND_ASYNC_AS_SYNC|SYNC_TRAFFIC_ON) ;
+	}
+
+	/*
+	 * split up the FIFO
+	 */
+	if (smc->hw.fp.fifo.fifo_config_mode & SYNC_TRAFFIC_ON) {
+		if (smc->hw.fp.fifo.fifo_config_mode & SEND_ASYNC_AS_SYNC) {
+			smc->hw.fp.fifo.tx_s_size = TX_LARGE_FIFO ;
+			smc->hw.fp.fifo.tx_a0_size = TX_SMALL_FIFO ;
+		}
+		else {
+			smc->hw.fp.fifo.tx_s_size = TX_MEDIUM_FIFO ;
+			smc->hw.fp.fifo.tx_a0_size = TX_MEDIUM_FIFO ;
+		}
+	}
+	else {
+			smc->hw.fp.fifo.tx_s_size = 0 ;
+			smc->hw.fp.fifo.tx_a0_size = TX_FIFO_SPACE ;
+	}
+
+	smc->hw.fp.fifo.rx1_fifo_start = smc->hw.fp.fifo.rbc_ram_start +
+		RX_FIFO_OFF ;
+	smc->hw.fp.fifo.tx_s_start = smc->hw.fp.fifo.rx1_fifo_start +
+		smc->hw.fp.fifo.rx1_fifo_size ;
+	smc->hw.fp.fifo.tx_a0_start = smc->hw.fp.fifo.tx_s_start +
+		smc->hw.fp.fifo.tx_s_size ;
+	smc->hw.fp.fifo.rx2_fifo_start = smc->hw.fp.fifo.tx_a0_start +
+		smc->hw.fp.fifo.tx_a0_size ;
+
+	DB_SMT("FIFO split: mode = %x\n",smc->hw.fp.fifo.fifo_config_mode,0) ;
+	DB_SMT("rbc_ram_start =	%x	 rbc_ram_end = 	%x\n",
+		smc->hw.fp.fifo.rbc_ram_start, smc->hw.fp.fifo.rbc_ram_end) ;
+	DB_SMT("rx1_fifo_start = %x	 tx_s_start = 	%x\n",
+		smc->hw.fp.fifo.rx1_fifo_start, smc->hw.fp.fifo.tx_s_start) ;
+	DB_SMT("tx_a0_start =	%x	 rx2_fifo_start = 	%x\n",
+		smc->hw.fp.fifo.tx_a0_start, smc->hw.fp.fifo.rx2_fifo_start) ;
+}
+
+void formac_reinit_tx(struct s_smc *smc)
+{
+	/*
+	 * Split up the FIFO and reinitialize the MAC if synchronous
+	 * bandwidth becomes available but no synchronous queue is
+	 * configured.
+	 */
+	if (!smc->hw.fp.fifo.tx_s_size && smc->mib.a[PATH0].fddiPATHSbaPayload){
+		(void)init_mac(smc,0) ;
+	}
+}
+
diff --git a/drivers/net/fddi/skfp/h/cmtdef.h b/drivers/net/fddi/skfp/h/cmtdef.h
new file mode 100644
index 0000000..5a6c612
--- /dev/null
+++ b/drivers/net/fddi/skfp/h/cmtdef.h
@@ -0,0 +1,756 @@
+/******************************************************************************
+ *
+ *	(C)Copyright 1998,1999 SysKonnect,
+ *	a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+#ifndef	_CMTDEF_
+#define _CMTDEF_
+
+/* **************************************************************** */
+
+/*
+ * implementation specific constants
+ * MODIIFY THE FOLLOWING THREE DEFINES
+ */
+#define AMDPLC			/* if Amd PLC chip used */
+#ifdef	CONC
+#define NUMPHYS		12	/* 2 for SAS or DAS, more for Concentrator */
+#else
+#ifdef	CONC_II
+#define NUMPHYS		24	/* 2 for SAS or DAS, more for Concentrator */
+#else
+#define NUMPHYS		2	/* 2 for SAS or DAS, more for Concentrator */
+#endif
+#endif
+#define NUMMACS		1	/* only 1 supported at the moment */
+#define NUMPATHS	2	/* primary and secondary path supported */
+
+/*
+ * DO NOT MODIFY BEYOND THIS POINT
+ */
+
+/* **************************************************************** */
+
+#if	NUMPHYS > 2
+#define CONCENTRATOR
+#endif
+
+/*
+ * Definitions for comfortable LINT usage
+ */
+#ifdef	lint
+#define LINT_USE(x)	(x)=(x)
+#else
+#define LINT_USE(x)
+#endif
+
+#ifdef	DEBUG
+#define	DB_PR(flag,a,b,c)	{ if (flag) printf(a,b,c) ; }
+#else
+#define	DB_PR(flag,a,b,c)
+#endif
+
+#ifdef DEBUG_BRD
+#define DB_ECM(a,b,c)		DB_PR((smc->debug.d_smt&1),a,b,c)
+#define DB_ECMN(n,a,b,c)	DB_PR((smc->debug.d_ecm >=(n)),a,b,c)
+#define DB_RMT(a,b,c)		DB_PR((smc->debug.d_smt&2),a,b,c)
+#define DB_RMTN(n,a,b,c)	DB_PR((smc->debug.d_rmt >=(n)),a,b,c)
+#define DB_CFM(a,b,c)		DB_PR((smc->debug.d_smt&4),a,b,c)
+#define DB_CFMN(n,a,b,c)	DB_PR((smc->debug.d_cfm >=(n)),a,b,c)
+#define DB_PCM(a,b,c)		DB_PR((smc->debug.d_smt&8),a,b,c)
+#define DB_PCMN(n,a,b,c)	DB_PR((smc->debug.d_pcm >=(n)),a,b,c)
+#define DB_SMT(a,b,c)		DB_PR((smc->debug.d_smtf),a,b,c)
+#define DB_SMTN(n,a,b,c)	DB_PR((smc->debug.d_smtf >=(n)),a,b,c)
+#define DB_SBA(a,b,c)		DB_PR((smc->debug.d_sba),a,b,c)
+#define DB_SBAN(n,a,b,c)	DB_PR((smc->debug.d_sba >=(n)),a,b,c)
+#define DB_ESS(a,b,c)		DB_PR((smc->debug.d_ess),a,b,c)
+#define DB_ESSN(n,a,b,c)	DB_PR((smc->debug.d_ess >=(n)),a,b,c)
+#else
+#define DB_ECM(a,b,c)		DB_PR((debug.d_smt&1),a,b,c)
+#define DB_ECMN(n,a,b,c)	DB_PR((debug.d_ecm >=(n)),a,b,c)
+#define DB_RMT(a,b,c)		DB_PR((debug.d_smt&2),a,b,c)
+#define DB_RMTN(n,a,b,c)	DB_PR((debug.d_rmt >=(n)),a,b,c)
+#define DB_CFM(a,b,c)		DB_PR((debug.d_smt&4),a,b,c)
+#define DB_CFMN(n,a,b,c)	DB_PR((debug.d_cfm >=(n)),a,b,c)
+#define DB_PCM(a,b,c)		DB_PR((debug.d_smt&8),a,b,c)
+#define DB_PCMN(n,a,b,c)	DB_PR((debug.d_pcm >=(n)),a,b,c)
+#define DB_SMT(a,b,c)		DB_PR((debug.d_smtf),a,b,c)
+#define DB_SMTN(n,a,b,c)	DB_PR((debug.d_smtf >=(n)),a,b,c)
+#define DB_SBA(a,b,c)		DB_PR((debug.d_sba),a,b,c)
+#define DB_SBAN(n,a,b,c)	DB_PR((debug.d_sba >=(n)),a,b,c)
+#define DB_ESS(a,b,c)		DB_PR((debug.d_ess),a,b,c)
+#define DB_ESSN(n,a,b,c)	DB_PR((debug.d_ess >=(n)),a,b,c)
+#endif
+
+#ifndef	SS_NOT_DS
+#define	SK_LOC_DECL(type,var)	type var
+#else
+#define	SK_LOC_DECL(type,var)	static type var
+#endif
+/*
+ * PHYs and PORTS
+ * Note: Don't touch the definition of PA and PB. Those might be used
+ *	by some "for" loops.
+ */
+#define PA		0
+#define PB		1
+#if	defined(SUPERNET_3) || defined(CONC_II)
+/*
+ * The port indices have to be different,
+ * because the MAC output goes through the 2. PLC
+ * Conc II: It has to be the first port in the row.
+ */
+#define PS		0	/* Internal PLC which is the same as PA */
+#else
+#define PS		1
+#endif
+#define PM		2		/* PM .. PA+NUM_PHYS-1 */
+
+/*
+ * PHY types - as in path descriptor 'fddiPHYType'
+ */
+#define TA			0	/* A port */
+#define TB			1	/* B port */
+#define TS			2	/* S port */
+#define TM			3	/* M port */
+#define TNONE			4
+
+
+/*
+ * indexes in MIB
+ */
+#define INDEX_MAC	1
+#define INDEX_PATH	1
+#define INDEX_PORT	1
+
+
+/*
+ * policies
+ */
+#define POLICY_AA	(1<<0)		/* reject AA */
+#define POLICY_AB	(1<<1)		/* reject AB */
+#define POLICY_AS	(1<<2)		/* reject AS */
+#define POLICY_AM	(1<<3)		/* reject AM */
+#define POLICY_BA	(1<<4)		/* reject BA */
+#define POLICY_BB	(1<<5)		/* reject BB */
+#define POLICY_BS	(1<<6)		/* reject BS */
+#define POLICY_BM	(1<<7)		/* reject BM */
+#define POLICY_SA	(1<<8)		/* reject SA */
+#define POLICY_SB	(1<<9)		/* reject SB */
+#define POLICY_SS	(1<<10)		/* reject SS */
+#define POLICY_SM	(1<<11)		/* reject SM */
+#define POLICY_MA	(1<<12)		/* reject MA */
+#define POLICY_MB	(1<<13)		/* reject MB */
+#define POLICY_MS	(1<<14)		/* reject MS */
+#define POLICY_MM	(1<<15)		/* reject MM */
+
+/*
+ * commands
+ */
+
+/*
+ * EVENTS
+ * event classes
+ */
+#define EVENT_ECM	1		/* event class ECM */
+#define EVENT_CFM	2		/* event class CFM */
+#define EVENT_RMT	3		/* event class RMT */
+#define EVENT_SMT	4		/* event class SMT */
+#define EVENT_PCM	5		/* event class PCM */
+#define EVENT_PCMA	5		/* event class PCMA */
+#define EVENT_PCMB	6		/* event class PCMB */
+
+/* WARNING :
+ * EVENT_PCM* must be last in the above list
+ * if more than two ports are used, EVENT_PCM .. EVENT_PCMA+NUM_PHYS-1
+ * are used !
+ */
+
+#define EV_TOKEN(class,event)	(((u_long)(class)<<16L)|((u_long)(event)))
+#define EV_T_CLASS(token)	((int)((token)>>16)&0xffff)
+#define EV_T_EVENT(token)	((int)(token)&0xffff)
+
+/*
+ * ECM events
+ */
+#define EC_CONNECT	1		/* connect request */
+#define EC_DISCONNECT	2		/* disconnect request */
+#define EC_TRACE_PROP	3		/* trace propagation */
+#define EC_PATH_TEST	4		/* path test */
+#define EC_TIMEOUT_TD	5		/* timer TD_min */
+#define EC_TIMEOUT_TMAX	6		/* timer trace_max */
+#define EC_TIMEOUT_IMAX	7		/* timer I_max */
+#define EC_TIMEOUT_INMAX 8		/* timer IN_max */
+#define EC_TEST_DONE	9		/* path test done */
+
+/*
+ * CFM events
+ */
+#define CF_LOOP		1		/* cf_loop flag from PCM */
+#define CF_LOOP_A	1		/* cf_loop flag from PCM */
+#define CF_LOOP_B	2		/* cf_loop flag from PCM */
+#define CF_JOIN		3		/* cf_join flag from PCM */
+#define CF_JOIN_A	3		/* cf_join flag from PCM */
+#define CF_JOIN_B	4		/* cf_join flag from PCM */
+
+/*
+ * PCM events
+ */
+#define PC_START		1
+#define PC_STOP			2
+#define PC_LOOP			3
+#define PC_JOIN			4
+#define PC_SIGNAL		5
+#define PC_REJECT		6
+#define PC_MAINT    		7
+#define PC_TRACE		8
+#define PC_PDR			9
+#define PC_ENABLE		10
+#define PC_DISABLE		11
+
+/*
+ * must be ordered as in LineStateType
+ */
+#define PC_QLS			12
+#define PC_ILS			13
+#define PC_MLS			14
+#define PC_HLS			15
+#define PC_LS_PDR		16
+#define PC_LS_NONE		17
+#define LS2MIB(x)	((x)-PC_QLS)
+#define MIB2LS(x)	((x)+PC_QLS)
+
+#define PC_TIMEOUT_TB_MAX	18	/* timer TB_max */
+#define PC_TIMEOUT_TB_MIN	19	/* timer TB_min */
+#define PC_TIMEOUT_C_MIN	20	/* timer C_Min */
+#define PC_TIMEOUT_T_OUT	21	/* timer T_Out */
+#define PC_TIMEOUT_TL_MIN	22	/* timer TL_Min */
+#define PC_TIMEOUT_T_NEXT	23	/* timer t_next[] */
+#define PC_TIMEOUT_LCT		24
+#define PC_NSE			25	/* NOISE hardware timer */
+#define PC_LEM			26	/* LEM done */
+
+/*
+ * RMT events				  meaning		from
+ */
+#define RM_RING_OP	1		/* ring operational	MAC	*/
+#define RM_RING_NON_OP	2		/* ring not operational	MAC	*/
+#define RM_MY_BEACON	3		/* recvd my beacon	MAC	*/
+#define RM_OTHER_BEACON	4		/* recvd other beacon	MAC	*/
+#define RM_MY_CLAIM	5		/* recvd my claim	MAC	*/
+#define RM_TRT_EXP	6		/* TRT exp		MAC	*/
+#define RM_VALID_CLAIM	7		/* claim from dup addr	MAC	*/
+#define RM_JOIN		8		/* signal rm_join	CFM	*/
+#define RM_LOOP		9		/* signal rm_loop	CFM	*/
+#define RM_DUP_ADDR	10		/* dup_addr_test hange	SMT-NIF	*/
+#define RM_ENABLE_FLAG	11		/* enable flag */
+
+#define RM_TIMEOUT_NON_OP	12	/* timeout T_Non_OP	*/
+#define RM_TIMEOUT_T_STUCK	13	/* timeout T_Stuck	*/
+#define RM_TIMEOUT_ANNOUNCE	14	/* timeout T_Announce	*/
+#define RM_TIMEOUT_T_DIRECT	15	/* timeout T_Direct	*/
+#define RM_TIMEOUT_D_MAX	16	/* timeout D_Max	*/
+#define RM_TIMEOUT_POLL		17	/* claim/beacon poller	*/
+#define RM_TX_STATE_CHANGE	18	/* To restart timer for D_Max */
+
+/*
+ * SMT events
+ */
+#define SM_TIMER	1		/* timer */
+#define SM_FAST		2		/* smt_force_irq */
+
+/* PC modes */
+#define PM_NONE		0
+#define PM_PEER		1
+#define PM_TREE		2
+
+/*
+ * PCM withhold codes
+ * MIB PC-WithholdType ENUM
+ */
+#define PC_WH_NONE	0		/* ok */
+#define PC_WH_M_M	1		/* M to M */
+#define PC_WH_OTHER	2		/* other incompatible phys */
+#define PC_WH_PATH	3		/* path not available */
+/*
+ * LCT duration
+ */
+#define LC_SHORT	1		/* short LCT */
+#define LC_MEDIUM	2		/* medium LCT */
+#define LC_LONG		3		/* long LCT */
+#define LC_EXTENDED	4		/* extended LCT */
+
+/*
+ * path_test values
+ */
+#define PT_NONE		0
+#define PT_TESTING	1		/* test is running */
+#define PT_PASSED	2		/* test passed */
+#define PT_FAILED	3		/* test failed */
+#define PT_PENDING	4		/* path test follows */
+#define PT_EXITING	5		/* disconnected while in trace/leave */
+
+/*
+ * duplicate address test
+ * MIB DupAddressTest ENUM
+ */
+#define DA_NONE		0		/* 		*/
+#define DA_PASSED	1		/* test passed */
+#define DA_FAILED	2		/* test failed */
+
+
+/*
+ * optical bypass
+ */
+#define BP_DEINSERT	0		/* disable bypass */
+#define BP_INSERT	1		/* enable bypass */
+
+/*
+ * ODL enable/disable
+ */
+#define PM_TRANSMIT_DISABLE	0	/* disable xmit */
+#define PM_TRANSMIT_ENABLE	1	/* enable xmit */
+
+/*
+ * parameter for config_mux
+ * note : number is index in config_endec table !
+ */
+#define MUX_THRUA	0		/* through A */
+#define MUX_THRUB	1		/* through B */
+#define MUX_WRAPA	2		/* wrap A */
+#define MUX_WRAPB	3		/* wrap B */
+#define MUX_ISOLATE	4		/* isolated */
+#define MUX_WRAPS	5		/* SAS */
+
+/*
+ * MAC control
+ */
+#define MA_RESET	0
+#define MA_BEACON	1
+#define MA_CLAIM	2
+#define MA_DIRECTED	3		/* directed beacon */
+#define MA_TREQ		4		/* change T_Req */
+#define MA_OFFLINE	5		/* switch MAC to offline */
+
+
+/*
+ * trace prop
+ * bit map for trace propagation
+ */
+#define ENTITY_MAC	(NUMPHYS)
+#define ENTITY_PHY(p)	(p)
+#define ENTITY_BIT(m)	(1<<(m))
+
+/*
+ * Resource Tag Types
+ */
+#define PATH_ISO	0	/* isolated */
+#define PATH_PRIM	3	/* primary path */
+#define PATH_THRU	5	/* through path */
+
+#define RES_MAC		2	/* resource type MAC */
+#define RES_PORT	4	/* resource type PORT */
+
+
+/*
+ * CFM state
+ * oops: MUST MATCH CF-StateType in SMT7.2 !
+ */
+#define SC0_ISOLATED	0		/* isolated */
+#define SC1_WRAP_A	5		/* wrap A (not used) */
+#define SC2_WRAP_B	6		/* wrap B (not used) */
+#define SC4_THRU_A	12		/* through A */
+#define SC5_THRU_B	7		/* through B (used in SMT 6.2) */
+#define SC7_WRAP_S	8		/* SAS (not used) */
+#define SC9_C_WRAP_A	9		/* c wrap A */
+#define SC10_C_WRAP_B	10		/* c wrap B */
+#define SC11_C_WRAP_S	11		/* c wrap S */
+
+/*
+ * convert MIB time in units of 80nS to uS
+ */
+#define MIB2US(t)		((t)/12)
+#define SEC2MIB(s)	((s)*12500000L)
+/*
+ * SMT timer
+ */
+struct smt_timer {
+	struct smt_timer	*tm_next ;	/* linked list */
+	struct s_smc		*tm_smc ;	/* pointer to context */
+	u_long			tm_delta ;	/* delta time */
+	u_long			tm_token ;	/* token value */
+	u_short			tm_active ;	/* flag : active/inactive */
+	u_short			tm_pad ;	/* pad field */
+} ;
+
+/*
+ * communication structures
+ */
+struct mac_parameter {
+	u_long	t_neg ;		/* T_Neg parameter */
+	u_long	t_pri ;		/* T_Pri register in MAC */
+} ;
+
+/*
+ * MAC counters
+ */
+struct mac_counter {
+	u_long	mac_nobuf_counter ;	/* MAC SW counter: no buffer */
+	u_long	mac_r_restart_counter ;	/* MAC SW counter: rx restarted */
+} ;
+
+/*
+ * para struct context for SMT parameters
+ */
+struct s_pcon {
+	int	pc_len ;
+	int	pc_err ;
+	int	pc_badset ;
+	void	*pc_p ;
+} ;
+
+/*
+ * link error monitor
+ */
+#define LEM_AVG	5
+struct lem_counter {
+#ifdef	AM29K
+	int	lem_on	;
+	u_long	lem_errors ;
+	u_long	lem_symbols ;
+	u_long	lem_tsymbols ;
+	int	lem_s_count ;
+	int	lem_n_s ;
+	int	lem_values ;
+	int	lem_index ;
+	int	lem_avg_ber[LEM_AVG] ;
+	int	lem_sum ;
+#else
+	u_short	lem_float_ber ;		/* 10E-nn bit error rate */
+	u_long	lem_errors ;		/* accumulated error count */
+	u_short	lem_on	;
+#endif
+} ;
+
+#define NUMBITS	10
+
+#ifdef	AMDPLC
+
+/*
+ * PLC state table
+ */
+struct s_plc {
+	u_short	p_state ;		/* current state */
+	u_short	p_bits ;		/* number of bits to send */
+	u_short	p_start ;		/* first bit pos */
+	u_short	p_pad ;			/* padding for alignment */
+	u_long soft_err ;		/* error counter */
+	u_long parity_err ;		/* error counter */
+	u_long ebuf_err ;		/* error counter */
+	u_long ebuf_cont ;		/* continuous error counter */
+	u_long phyinv ;			/* error counter */
+	u_long vsym_ctr ;		/* error counter */
+	u_long mini_ctr ;		/* error counter */
+	u_long tpc_exp ;		/* error counter */
+	u_long np_err ;			/* error counter */
+	u_long b_pcs ;			/* error counter */
+	u_long b_tpc ;			/* error counter */
+	u_long b_tne ;			/* error counter */
+	u_long b_qls ;			/* error counter */
+	u_long b_ils ;			/* error counter */
+	u_long b_hls ;			/* error counter */
+} ;
+#endif
+
+#ifdef	PROTOTYP_INC
+#include "fddi/driver.pro"
+#else	/* PROTOTYP_INC */
+/*
+ * function prototypes
+ */
+#include "h/mbuf.h"	/* Type definitions for MBUFs */
+#include "h/smtstate.h"	/* struct smt_state */
+
+void hwt_restart(struct s_smc *smc);	/* hwt.c */
+SMbuf *smt_build_frame(struct s_smc *smc, int class, int type,
+		       int length);	/* smt.c */
+SMbuf *smt_get_mbuf(struct s_smc *smc);	/* drvsr.c */
+void *sm_to_para(struct s_smc *smc, struct smt_header *sm,
+		 int para);		/* smt.c */
+
+#ifndef SK_UNUSED
+#define SK_UNUSED(var)		(void)(var)
+#endif
+
+void queue_event(struct s_smc *smc, int class, int event);
+void ecm(struct s_smc *smc, int event);
+void ecm_init(struct s_smc *smc);
+void rmt(struct s_smc *smc, int event);
+void rmt_init(struct s_smc *smc);
+void pcm(struct s_smc *smc, const int np, int event);
+void pcm_init(struct s_smc *smc);
+void cfm(struct s_smc *smc, int event);
+void cfm_init(struct s_smc *smc);
+void smt_timer_start(struct s_smc *smc, struct smt_timer *timer, u_long time,
+		     u_long token);
+void smt_timer_stop(struct s_smc *smc, struct smt_timer *timer);
+void pcm_status_state(struct s_smc *smc, int np, int *type, int *state,
+		      int *remote, int *mac);
+void plc_config_mux(struct s_smc *smc, int mux);
+void sm_lem_evaluate(struct s_smc *smc);
+void mac_update_counter(struct s_smc *smc);
+void sm_pm_ls_latch(struct s_smc *smc, int phy, int on_off);
+void sm_ma_control(struct s_smc *smc, int mode);
+void sm_mac_check_beacon_claim(struct s_smc *smc);
+void config_mux(struct s_smc *smc, int mux);
+void smt_agent_init(struct s_smc *smc);
+void smt_timer_init(struct s_smc *smc);
+void smt_received_pack(struct s_smc *smc, SMbuf *mb, int fs);
+void smt_add_para(struct s_smc *smc, struct s_pcon *pcon, u_short para,
+		  int index, int local);
+void smt_swap_para(struct smt_header *sm, int len, int direction);
+void ev_init(struct s_smc *smc);
+void hwt_init(struct s_smc *smc);
+u_long hwt_read(struct s_smc *smc);
+void hwt_stop(struct s_smc *smc);
+void hwt_start(struct s_smc *smc, u_long time);
+void smt_send_mbuf(struct s_smc *smc, SMbuf *mb, int fc);
+void smt_free_mbuf(struct s_smc *smc, SMbuf *mb);
+void sm_pm_bypass_req(struct s_smc *smc, int mode);
+void rmt_indication(struct s_smc *smc, int i);
+void cfm_state_change(struct s_smc *smc, int c_state);
+
+#if defined(DEBUG) || !defined(NO_SMT_PANIC)
+void smt_panic(struct s_smc *smc, char *text);
+#else
+#define	smt_panic(smc,text)
+#endif /* DEBUG || !NO_SMT_PANIC */
+
+void smt_stat_counter(struct s_smc *smc, int stat);
+void smt_timer_poll(struct s_smc *smc);
+u_long smt_get_time(void);
+u_long smt_get_tid(struct s_smc *smc);
+void smt_timer_done(struct s_smc *smc);
+void smt_fixup_mib(struct s_smc *smc);
+void smt_reset_defaults(struct s_smc *smc, int level);
+void smt_agent_task(struct s_smc *smc);
+int smt_check_para(struct s_smc *smc, struct smt_header *sm,
+		   const u_short list[]);
+void driver_get_bia(struct s_smc *smc, struct fddi_addr *bia_addr);
+
+#ifdef SUPERNET_3
+void drv_reset_indication(struct s_smc *smc);
+#endif	/* SUPERNET_3 */
+
+void smt_start_watchdog(struct s_smc *smc);
+void smt_event(struct s_smc *smc, int event);
+void timer_event(struct s_smc *smc, u_long token);
+void ev_dispatcher(struct s_smc *smc);
+void pcm_get_state(struct s_smc *smc, struct smt_state *state);
+void ecm_state_change(struct s_smc *smc, int e_state);
+int sm_pm_bypass_present(struct s_smc *smc);
+void pcm_state_change(struct s_smc *smc, int plc, int p_state);
+void rmt_state_change(struct s_smc *smc, int r_state);
+int sm_pm_get_ls(struct s_smc *smc, int phy);
+int pcm_get_s_port(struct s_smc *smc);
+int pcm_rooted_station(struct s_smc *smc);
+int cfm_get_mac_input(struct s_smc *smc);
+int cfm_get_mac_output(struct s_smc *smc);
+int cem_build_path(struct s_smc *smc, char *to, int path_index);
+int sm_mac_get_tx_state(struct s_smc *smc);
+char *get_pcmstate(struct s_smc *smc, int np);
+int smt_action(struct s_smc *smc, int class, int code, int index);
+u_short smt_online(struct s_smc *smc, int on);
+void smt_force_irq(struct s_smc *smc);
+void smt_pmf_received_pack(struct s_smc *smc, SMbuf *mb, int local);
+void smt_send_frame(struct s_smc *smc, SMbuf *mb, int fc, int local);
+void smt_set_timestamp(struct s_smc *smc, u_char *p);
+void mac_set_rx_mode(struct s_smc *smc,	int mode);
+int mac_add_multicast(struct s_smc *smc, struct fddi_addr *addr, int can);
+void mac_update_multicast(struct s_smc *smc);
+void mac_clear_multicast(struct s_smc *smc);
+void set_formac_tsync(struct s_smc *smc, long sync_bw);
+void formac_reinit_tx(struct s_smc *smc);
+void formac_tx_restart(struct s_smc *smc);
+void process_receive(struct s_smc *smc);
+void init_driver_fplus(struct s_smc *smc);
+void rtm_irq(struct s_smc *smc);
+void rtm_set_timer(struct s_smc *smc);
+void ring_status_indication(struct s_smc *smc, u_long status);
+void llc_recover_tx(struct s_smc *smc);
+void llc_restart_tx(struct s_smc *smc);
+void plc_clear_irq(struct s_smc *smc, int p);
+void plc_irq(struct s_smc *smc,	int np,	unsigned int cmd);
+int smt_set_mac_opvalues(struct s_smc *smc);
+
+#ifdef TAG_MODE
+void mac_do_pci_fix(struct s_smc *smc);
+void mac_drv_clear_tx_queue(struct s_smc *smc);
+void mac_drv_repair_descr(struct s_smc *smc);
+u_long hwt_quick_read(struct s_smc *smc);
+void hwt_wait_time(struct s_smc *smc, u_long start, long duration);
+#endif
+
+#ifdef SMT_PNMI
+int pnmi_init(struct s_smc* smc);
+int pnmi_process_ndis_id(struct s_smc *smc, u_long ndis_oid, void *buf, int len,
+			 int *BytesAccessed, int *BytesNeeded, u_char action);
+#endif
+
+#ifdef	SBA
+#ifndef _H2INC
+void sba();
+#endif
+void sba_raf_received_pack();
+void sba_timer_poll();
+void smt_init_sba();
+#endif
+
+#ifdef	ESS
+int ess_raf_received_pack(struct s_smc *smc, SMbuf *mb, struct smt_header *sm,
+			  int fs);
+void ess_timer_poll(struct s_smc *smc);
+void ess_para_change(struct s_smc *smc);
+#endif
+
+#ifndef	BOOT
+void smt_init_evc(struct s_smc *smc);
+void smt_srf_event(struct s_smc *smc, int code, int index, int cond);
+#else
+#define smt_init_evc(smc)
+#define smt_srf_event(smc,code,index,cond)
+#endif
+
+#ifndef SMT_REAL_TOKEN_CT
+void smt_emulate_token_ct(struct s_smc *smc, int mac_index);
+#endif
+
+#if defined(DEBUG) && !defined(BOOT)
+void dump_smt(struct s_smc *smc, struct smt_header *sm, char *text);
+#else
+#define	dump_smt(smc,sm,text)
+#endif
+
+#ifdef	DEBUG
+char* addr_to_string(struct fddi_addr *addr);
+void dump_hex(char *p, int len);
+#endif
+
+#endif	/* PROTOTYP_INC */
+
+/* PNMI default defines */
+#ifndef PNMI_INIT
+#define	PNMI_INIT(smc)	/* Nothing */
+#endif
+#ifndef PNMI_GET_ID
+#define PNMI_GET_ID( smc, ndis_oid, buf, len, BytesWritten, BytesNeeded ) \
+		( 1 ? (-1) : (-1) )
+#endif
+#ifndef PNMI_SET_ID
+#define PNMI_SET_ID( smc, ndis_oid, buf, len, BytesRead, BytesNeeded, \
+		set_type) ( 1 ? (-1) : (-1) )
+#endif
+
+/*
+ * SMT_PANIC defines
+ */
+#ifndef	SMT_PANIC
+#define	SMT_PANIC(smc,nr,msg)	smt_panic (smc, msg)
+#endif
+
+#ifndef	SMT_ERR_LOG
+#define	SMT_ERR_LOG(smc,nr,msg)	SMT_PANIC (smc, nr, msg)
+#endif
+
+#ifndef	SMT_EBASE
+#define	SMT_EBASE	100
+#endif
+
+#define	SMT_E0100	SMT_EBASE + 0
+#define	SMT_E0100_MSG	"cfm FSM: invalid ce_type"
+#define	SMT_E0101	SMT_EBASE + 1
+#define	SMT_E0101_MSG	"CEM: case ???"
+#define	SMT_E0102	SMT_EBASE + 2
+#define	SMT_E0102_MSG	"CEM A: invalid state"
+#define	SMT_E0103	SMT_EBASE + 3
+#define	SMT_E0103_MSG	"CEM B: invalid state"
+#define	SMT_E0104	SMT_EBASE + 4
+#define	SMT_E0104_MSG	"CEM M: invalid state"
+#define	SMT_E0105	SMT_EBASE + 5
+#define	SMT_E0105_MSG	"CEM S: invalid state"
+#define	SMT_E0106	SMT_EBASE + 6
+#define	SMT_E0106_MSG	"CFM : invalid state"
+#define	SMT_E0107	SMT_EBASE + 7
+#define	SMT_E0107_MSG	"ECM : invalid state"
+#define	SMT_E0108	SMT_EBASE + 8
+#define	SMT_E0108_MSG	"prop_actions : NAC in DAS CFM"
+#define	SMT_E0109	SMT_EBASE + 9
+#define	SMT_E0109_MSG	"ST2U.FM_SERRSF error in special frame"
+#define	SMT_E0110	SMT_EBASE + 10
+#define	SMT_E0110_MSG	"ST2U.FM_SRFRCTOV recv. count. overflow"
+#define	SMT_E0111	SMT_EBASE + 11
+#define	SMT_E0111_MSG	"ST2U.FM_SNFSLD NP & FORMAC simult. load"
+#define	SMT_E0112	SMT_EBASE + 12
+#define	SMT_E0112_MSG	"ST2U.FM_SRCVFRM single-frame recv.-mode"
+#define	SMT_E0113	SMT_EBASE + 13
+#define	SMT_E0113_MSG	"FPLUS: Buffer Memory Error"
+#define	SMT_E0114	SMT_EBASE + 14
+#define	SMT_E0114_MSG	"ST2U.FM_SERRSF error in special frame"
+#define	SMT_E0115	SMT_EBASE + 15
+#define	SMT_E0115_MSG	"ST3L: parity error in receive queue 2"
+#define	SMT_E0116	SMT_EBASE + 16
+#define	SMT_E0116_MSG	"ST3L: parity error in receive queue 1"
+#define	SMT_E0117	SMT_EBASE + 17
+#define	SMT_E0117_MSG	"E_SMT_001: RxD count for receive queue 1 = 0"
+#define	SMT_E0118	SMT_EBASE + 18
+#define	SMT_E0118_MSG	"PCM : invalid state"
+#define	SMT_E0119	SMT_EBASE + 19
+#define	SMT_E0119_MSG	"smt_add_para"
+#define	SMT_E0120	SMT_EBASE + 20
+#define	SMT_E0120_MSG	"smt_set_para"
+#define	SMT_E0121	SMT_EBASE + 21
+#define	SMT_E0121_MSG	"invalid event in dispatcher"
+#define	SMT_E0122	SMT_EBASE + 22
+#define	SMT_E0122_MSG	"RMT : invalid state"
+#define	SMT_E0123	SMT_EBASE + 23
+#define	SMT_E0123_MSG	"SBA: state machine has invalid state"
+#define	SMT_E0124	SMT_EBASE + 24
+#define	SMT_E0124_MSG	"sba_free_session() called with NULL pointer"
+#define	SMT_E0125	SMT_EBASE + 25
+#define	SMT_E0125_MSG	"SBA : invalid session pointer"
+#define	SMT_E0126	SMT_EBASE + 26
+#define	SMT_E0126_MSG	"smt_free_mbuf() called with NULL pointer\n"
+#define	SMT_E0127	SMT_EBASE + 27
+#define	SMT_E0127_MSG	"sizeof evcs"
+#define	SMT_E0128	SMT_EBASE + 28
+#define	SMT_E0128_MSG	"evc->evc_cond_state = 0"
+#define	SMT_E0129	SMT_EBASE + 29
+#define	SMT_E0129_MSG	"evc->evc_multiple = 0"
+#define	SMT_E0130	SMT_EBASE + 30
+#define	SMT_E0130_MSG	write_mdr_warning
+#define	SMT_E0131	SMT_EBASE + 31
+#define	SMT_E0131_MSG	cam_warning
+#define SMT_E0132	SMT_EBASE + 32
+#define SMT_E0132_MSG	"ST1L.FM_SPCEPDx parity/coding error"
+#define SMT_E0133	SMT_EBASE + 33
+#define SMT_E0133_MSG	"ST1L.FM_STBURx tx buffer underrun"
+#define SMT_E0134	SMT_EBASE + 34
+#define SMT_E0134_MSG	"ST1L.FM_SPCEPDx parity error"
+#define SMT_E0135	SMT_EBASE + 35
+#define SMT_E0135_MSG	"RMT: duplicate MAC address detected. Ring left!"
+#define SMT_E0136	SMT_EBASE + 36
+#define SMT_E0136_MSG	"Elasticity Buffer hang-up"
+#define SMT_E0137	SMT_EBASE + 37
+#define SMT_E0137_MSG	"SMT: queue overrun"
+#define SMT_E0138	SMT_EBASE + 38
+#define SMT_E0138_MSG	"RMT: duplicate MAC address detected. Ring NOT left!"
+#endif	/* _CMTDEF_ */
diff --git a/drivers/net/fddi/skfp/h/fddi.h b/drivers/net/fddi/skfp/h/fddi.h
new file mode 100644
index 0000000..c9a28a8
--- /dev/null
+++ b/drivers/net/fddi/skfp/h/fddi.h
@@ -0,0 +1,69 @@
+/******************************************************************************
+ *
+ *	(C)Copyright 1998,1999 SysKonnect,
+ *	a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+#ifndef	_FDDI_
+#define _FDDI_
+
+struct fddi_addr {
+	u_char	a[6] ;
+} ;
+
+#define GROUP_ADDR	0x80		/* MSB in a[0] */
+
+struct fddi_mac {
+	struct fddi_addr	mac_dest ;
+	struct fddi_addr	mac_source ;
+	u_char			mac_info[4478] ;
+} ;
+
+#define FDDI_MAC_SIZE	(12)
+#define FDDI_RAW_MTU	(4500-5)	/* exl. Pr,SD, ED/FS */
+#define FDDI_RAW	(4500)
+
+/*
+ * FC values
+ */
+#define FC_VOID		0x40		/* void frame */
+#define FC_TOKEN	0x80		/* token */
+#define FC_RES_TOKEN	0xc0		/* restricted token */
+#define FC_SMT_INFO	0x41		/* SMT Info frame */
+/*
+ * FC_SMT_LAN_LOC && FC_SMT_LOC are SK specific !
+ */
+#define FC_SMT_LAN_LOC	0x42		/* local SMT Info frame */
+#define FC_SMT_LOC	0x43		/* local SMT Info frame */
+#define FC_SMT_NSA	0x4f		/* SMT NSA frame */
+#define FC_MAC		0xc0		/* MAC frame */
+#define FC_BEACON	0xc2		/* MAC beacon frame */
+#define FC_CLAIM	0xc3		/* MAC claim frame */
+#define FC_SYNC_LLC	0xd0		/* sync. LLC frame */
+#define FC_ASYNC_LLC	0x50		/* async. LLC frame */
+#define FC_SYNC_BIT	0x80		/* sync. bit in FC */
+
+#define FC_LLC_PRIOR	0x07		/* priority bits */
+
+#define BEACON_INFO	0		/* beacon type */
+#define DBEACON_INFO	1		/* beacon type DIRECTED */
+
+
+/*
+ * indicator bits
+ */
+#define C_INDICATOR	(1<<0)
+#define A_INDICATOR	(1<<1)
+#define E_INDICATOR	(1<<2)
+#define I_INDICATOR	(1<<6)		/* SK specific */ 
+#define L_INDICATOR	(1<<7)		/* SK specific */
+
+#endif	/* _FDDI_ */
diff --git a/drivers/net/fddi/skfp/h/fddimib.h b/drivers/net/fddi/skfp/h/fddimib.h
new file mode 100644
index 0000000..d1acdc7
--- /dev/null
+++ b/drivers/net/fddi/skfp/h/fddimib.h
@@ -0,0 +1,349 @@
+/******************************************************************************
+ *
+ *	(C)Copyright 1998,1999 SysKonnect,
+ *	a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+ * FDDI MIB
+ */
+
+/*
+ * typedefs
+ */
+
+typedef	u_long	Counter ;
+typedef u_char	TimeStamp[8] ;
+typedef struct fddi_addr LongAddr ;
+typedef	u_long	Timer_2 ;
+typedef	u_long	Timer ;
+typedef	u_short	ResId ;
+typedef u_short	SMTEnum ;
+typedef	u_char	SMTFlag ;
+
+typedef struct {
+	Counter		count ;
+	TimeStamp	timestamp ;
+} SetCountType ;
+
+/*
+ * bits for bit string "available_path"
+ */
+#define MIB_PATH_P	(1<<0)
+#define MIB_PATH_S	(1<<1)
+#define MIB_PATH_L	(1<<2)
+
+/*
+ * bits for bit string PermittedPaths & RequestedPaths (SIZE(8))
+ */
+#define MIB_P_PATH_LOCAL	(1<<0)
+#define MIB_P_PATH_SEC_ALTER	(1<<1)
+#define MIB_P_PATH_PRIM_ALTER	(1<<2)
+#define MIB_P_PATH_CON_ALTER	(1<<3)
+#define MIB_P_PATH_SEC_PREFER	(1<<4)
+#define MIB_P_PATH_PRIM_PREFER	(1<<5)
+#define MIB_P_PATH_CON_PREFER	(1<<6)
+#define MIB_P_PATH_THRU		(1<<7)
+
+/*
+ * enum current path
+ */
+#define MIB_PATH_ISOLATED	0
+#define MIB_PATH_LOCAL		1
+#define MIB_PATH_SECONDARY	2
+#define MIB_PATH_PRIMARY	3
+#define MIB_PATH_CONCATENATED	4
+#define MIB_PATH_THRU		5
+
+/*
+ * enum PMDClass
+ */
+#define MIB_PMDCLASS_MULTI	0
+#define MIB_PMDCLASS_SINGLE1	1
+#define MIB_PMDCLASS_SINGLE2	2
+#define MIB_PMDCLASS_SONET	3
+#define MIB_PMDCLASS_LCF	4
+#define MIB_PMDCLASS_TP		5
+#define MIB_PMDCLASS_UNKNOWN	6
+#define MIB_PMDCLASS_UNSPEC	7
+
+/*
+ * enum SMTStationStatus
+ */
+#define MIB_SMT_STASTA_CON	0
+#define MIB_SMT_STASTA_SEPA	1
+#define MIB_SMT_STASTA_THRU	2
+
+
+struct fddi_mib {
+	/*
+	 * private
+	 */
+	u_char			fddiPRPMFPasswd[8] ;
+	struct smt_sid		fddiPRPMFStation ;
+
+#ifdef	ESS
+	/*
+	 * private variables for static allocation of the
+	 * End Station Support
+	 */
+	u_long	fddiESSPayload ;	/* payload for static alloc */
+	u_long	fddiESSOverhead ;	/* frame ov for static alloc */
+	u_long	fddiESSMaxTNeg ;	/* maximum of T-NEG */
+	u_long	fddiESSMinSegmentSize ;	/* min size of the sync frames */
+	u_long	fddiESSCategory ;	/* category for the Alloc req */
+	short	fddiESSSynchTxMode ;	/* send all LLC frames as sync */
+#endif	/* ESS */
+#ifdef	SBA
+	/*
+	 * private variables for the Synchronous Bandwidth Allocator
+	 */
+	char	fddiSBACommand ;	/* holds the parsed SBA cmd */
+	u_char	fddiSBAAvailable ;	/* SBA allocatable value */
+#endif	/* SBA */
+
+	/*
+	 * SMT standard mib
+	 */
+	struct smt_sid		fddiSMTStationId ;
+	u_short			fddiSMTOpVersionId ;
+	u_short			fddiSMTHiVersionId ;
+	u_short			fddiSMTLoVersionId ;
+	u_char			fddiSMTManufacturerData[32] ;
+	u_char			fddiSMTUserData[32] ;
+	u_short			fddiSMTMIBVersionId ;
+
+	/*
+	 * ConfigGrp
+	 */
+	u_char			fddiSMTMac_Ct ;
+	u_char			fddiSMTNonMaster_Ct ;
+	u_char			fddiSMTMaster_Ct ;
+	u_char			fddiSMTAvailablePaths ;
+	u_short			fddiSMTConfigCapabilities ;
+	u_short			fddiSMTConfigPolicy ;
+	u_short			fddiSMTConnectionPolicy ;
+	u_short			fddiSMTTT_Notify ;
+	u_char			fddiSMTStatRptPolicy ;
+	u_long			fddiSMTTrace_MaxExpiration ;
+	u_short			fddiSMTPORTIndexes[NUMPHYS] ;
+	u_short			fddiSMTMACIndexes ;
+	u_char			fddiSMTBypassPresent ;
+
+	/*
+	 * StatusGrp
+	 */
+	SMTEnum			fddiSMTECMState ;
+	SMTEnum			fddiSMTCF_State ;
+	SMTEnum			fddiSMTStationStatus ;
+	u_char			fddiSMTRemoteDisconnectFlag ;
+	u_char			fddiSMTPeerWrapFlag ;
+
+	/*
+	 * MIBOperationGrp
+	 */
+	TimeStamp		fddiSMTTimeStamp ;
+	TimeStamp		fddiSMTTransitionTimeStamp ;
+	SetCountType		fddiSMTSetCount ;
+	struct smt_sid		fddiSMTLastSetStationId ;
+
+	struct fddi_mib_m {
+		u_short		fddiMACFrameStatusFunctions ;
+		Timer_2		fddiMACT_MaxCapabilitiy ;
+		Timer_2		fddiMACTVXCapabilitiy ;
+
+		/* ConfigGrp */
+		u_char		fddiMACMultiple_N ;	/* private */
+		u_char		fddiMACMultiple_P ;	/* private */
+		u_char		fddiMACDuplicateAddressCond ;/* private */
+		u_char		fddiMACAvailablePaths ;
+		u_short		fddiMACCurrentPath ;
+		LongAddr	fddiMACUpstreamNbr ;
+		LongAddr	fddiMACDownstreamNbr ;
+		LongAddr	fddiMACOldUpstreamNbr ;
+		LongAddr	fddiMACOldDownstreamNbr ;
+		SMTEnum		fddiMACDupAddressTest ;
+		u_short		fddiMACRequestedPaths ;
+		SMTEnum		fddiMACDownstreamPORTType ;
+		ResId		fddiMACIndex ;
+
+		/* AddressGrp */
+		LongAddr	fddiMACSMTAddress ;
+
+		/* OperationGrp */
+		Timer_2		fddiMACT_Min ;	/* private */
+		Timer_2		fddiMACT_ReqMIB ;
+		Timer_2		fddiMACT_Req ;	/* private */
+		Timer_2		fddiMACT_Neg ;
+		Timer_2		fddiMACT_MaxMIB ;
+		Timer_2		fddiMACT_Max ;	/* private */
+		Timer_2		fddiMACTvxValueMIB ;
+		Timer_2		fddiMACTvxValue ; /* private */
+		Timer_2		fddiMACT_Pri0 ;
+		Timer_2		fddiMACT_Pri1 ;
+		Timer_2		fddiMACT_Pri2 ;
+		Timer_2		fddiMACT_Pri3 ;
+		Timer_2		fddiMACT_Pri4 ;
+		Timer_2		fddiMACT_Pri5 ;
+		Timer_2		fddiMACT_Pri6 ;
+
+		/* CountersGrp */
+		Counter		fddiMACFrame_Ct ;
+		Counter		fddiMACCopied_Ct ;
+		Counter		fddiMACTransmit_Ct ;
+		Counter		fddiMACToken_Ct ;
+		Counter		fddiMACError_Ct ;
+		Counter		fddiMACLost_Ct ;
+		Counter		fddiMACTvxExpired_Ct ;
+		Counter		fddiMACNotCopied_Ct ;
+		Counter		fddiMACRingOp_Ct ;
+
+		Counter		fddiMACSMTCopied_Ct ;		/* private */
+		Counter		fddiMACSMTTransmit_Ct ;		/* private */
+
+		/* private for delta ratio */
+		Counter		fddiMACOld_Frame_Ct ;
+		Counter		fddiMACOld_Copied_Ct ;
+		Counter		fddiMACOld_Error_Ct ;
+		Counter		fddiMACOld_Lost_Ct ;
+		Counter		fddiMACOld_NotCopied_Ct ;
+
+		/* FrameErrorConditionGrp */
+		u_short		fddiMACFrameErrorThreshold ;
+		u_short		fddiMACFrameErrorRatio ;
+
+		/* NotCopiedConditionGrp */
+		u_short		fddiMACNotCopiedThreshold ;
+		u_short		fddiMACNotCopiedRatio ;
+
+		/* StatusGrp */
+		SMTEnum		fddiMACRMTState ;
+		SMTFlag		fddiMACDA_Flag ;
+		SMTFlag		fddiMACUNDA_Flag ;
+		SMTFlag		fddiMACFrameErrorFlag ;
+		SMTFlag		fddiMACNotCopiedFlag ;
+		SMTFlag		fddiMACMA_UnitdataAvailable ;
+		SMTFlag		fddiMACHardwarePresent ;
+		SMTFlag		fddiMACMA_UnitdataEnable ;
+
+	} m[NUMMACS] ;
+#define MAC0	0
+
+	struct fddi_mib_a {
+		ResId		fddiPATHIndex ;
+		u_long		fddiPATHSbaPayload ;
+		u_long		fddiPATHSbaOverhead ;
+		/* fddiPATHConfiguration is built on demand */
+		/* u_long		fddiPATHConfiguration ; */
+		Timer		fddiPATHT_Rmode ;
+		u_long		fddiPATHSbaAvailable ;
+		Timer_2		fddiPATHTVXLowerBound ;
+		Timer_2		fddiPATHT_MaxLowerBound ;
+		Timer_2		fddiPATHMaxT_Req ;
+	} a[NUMPATHS] ;
+#define PATH0	0
+
+	struct fddi_mib_p {
+		/* ConfigGrp */
+		SMTEnum		fddiPORTMy_Type ;
+		SMTEnum		fddiPORTNeighborType ;
+		u_char		fddiPORTConnectionPolicies ;
+		struct {
+			u_char	T_val ;
+			u_char	R_val ;
+		} fddiPORTMacIndicated ;
+		SMTEnum		fddiPORTCurrentPath ;
+		/* must be 4: is 32 bit in SMT format
+		 * indices :
+		 *	1	none
+		 *	2	tree
+		 *	3	peer
+		 */
+		u_char		fddiPORTRequestedPaths[4] ;
+		u_short		fddiPORTMACPlacement ;
+		u_char		fddiPORTAvailablePaths ;
+		u_char		fddiPORTConnectionCapabilities ;
+		SMTEnum		fddiPORTPMDClass ;
+		ResId		fddiPORTIndex ;
+
+		/* OperationGrp */
+		SMTEnum		fddiPORTMaint_LS ;
+		SMTEnum		fddiPORTPC_LS ;
+		u_char		fddiPORTBS_Flag ;
+
+		/* ErrorCtrsGrp */
+		Counter		fddiPORTLCTFail_Ct ;
+		Counter		fddiPORTEBError_Ct ;
+		Counter		fddiPORTOldEBError_Ct ;
+
+		/* LerGrp */
+		Counter		fddiPORTLem_Reject_Ct ;
+		Counter		fddiPORTLem_Ct ;
+		u_char		fddiPORTLer_Estimate ;
+		u_char		fddiPORTLer_Cutoff ;
+		u_char		fddiPORTLer_Alarm ;
+
+		/* StatusGrp */
+		SMTEnum		fddiPORTConnectState ;
+		SMTEnum		fddiPORTPCMState ;	/* real value */
+		SMTEnum		fddiPORTPCMStateX ;	/* value for MIB */
+		SMTEnum		fddiPORTPC_Withhold ;
+		SMTFlag		fddiPORTHardwarePresent ;
+		u_char		fddiPORTLerFlag ;
+
+		u_char		fddiPORTMultiple_U ;	/* private */
+		u_char		fddiPORTMultiple_P ;	/* private */
+		u_char		fddiPORTEB_Condition ;	/* private */
+	} p[NUMPHYS] ;
+	struct {
+		Counter		fddiPRIVECF_Req_Rx ;	/* ECF req received */
+		Counter		fddiPRIVECF_Reply_Rx ;	/* ECF repl received */
+		Counter		fddiPRIVECF_Req_Tx ;	/* ECF req transm */
+		Counter		fddiPRIVECF_Reply_Tx ;	/* ECF repl transm */
+		Counter		fddiPRIVPMF_Get_Rx ;	/* PMF Get rec */
+		Counter		fddiPRIVPMF_Set_Rx ;	/* PMF Set rec */
+		Counter		fddiPRIVRDF_Rx ;	/* RDF received */
+		Counter		fddiPRIVRDF_Tx ;	/* RDF transmitted */
+	} priv ;
+} ;
+
+/*
+ * OIDs for statistics
+ */
+#define	SMT_OID_CF_STATE	1	/* fddiSMTCF_State */
+#define	SMT_OID_PCM_STATE_A	2	/* fddiPORTPCMState port A */
+#define	SMT_OID_PCM_STATE_B	17	/* fddiPORTPCMState port B */
+#define	SMT_OID_RMT_STATE	3	/* fddiMACRMTState */
+#define	SMT_OID_UNA		4	/* fddiMACUpstreamNbr */
+#define	SMT_OID_DNA		5	/* fddiMACOldDownstreamNbr */
+#define	SMT_OID_ERROR_CT	6	/* fddiMACError_Ct */
+#define	SMT_OID_LOST_CT		7	/* fddiMACLost_Ct */
+#define	SMT_OID_LEM_CT		8	/* fddiPORTLem_Ct */
+#define	SMT_OID_LEM_CT_A	11	/* fddiPORTLem_Ct port A */
+#define	SMT_OID_LEM_CT_B	12	/* fddiPORTLem_Ct port B */
+#define	SMT_OID_LCT_FAIL_CT	9	/* fddiPORTLCTFail_Ct */
+#define	SMT_OID_LCT_FAIL_CT_A	13	/* fddiPORTLCTFail_Ct port A */
+#define	SMT_OID_LCT_FAIL_CT_B	14	/* fddiPORTLCTFail_Ct port B */
+#define	SMT_OID_LEM_REJECT_CT	10	/* fddiPORTLem_Reject_Ct */
+#define	SMT_OID_LEM_REJECT_CT_A	15	/* fddiPORTLem_Reject_Ct port A */
+#define	SMT_OID_LEM_REJECT_CT_B	16	/* fddiPORTLem_Reject_Ct port B */
+
+/*
+ * SK MIB
+ */
+#define SMT_OID_ECF_REQ_RX	20	/* ECF requests received */
+#define SMT_OID_ECF_REPLY_RX	21	/* ECF replies received */
+#define SMT_OID_ECF_REQ_TX	22	/* ECF requests transmitted */
+#define SMT_OID_ECF_REPLY_TX	23	/* ECF replies transmitted */
+#define SMT_OID_PMF_GET_RX	24	/* PMF get requests received */
+#define SMT_OID_PMF_SET_RX	25	/* PMF set requests received */
+#define SMT_OID_RDF_RX		26	/* RDF received */
+#define SMT_OID_RDF_TX		27	/* RDF transmitted */
diff --git a/drivers/net/fddi/skfp/h/fplustm.h b/drivers/net/fddi/skfp/h/fplustm.h
new file mode 100644
index 0000000..d43191e
--- /dev/null
+++ b/drivers/net/fddi/skfp/h/fplustm.h
@@ -0,0 +1,274 @@
+/******************************************************************************
+ *
+ *	(C)Copyright 1998,1999 SysKonnect,
+ *	a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+ *	AMD Fplus in tag mode data structs
+ *	defs for fplustm.c
+ */
+
+#ifndef	_FPLUS_
+#define _FPLUS_
+
+#ifndef	HW_PTR
+#define	HW_PTR	void __iomem *
+#endif
+
+/*
+ * fplus error statistic structure
+ */
+struct err_st {
+	u_long err_valid ;		/* memory status valid */
+	u_long err_abort ;		/* memory status receive abort */
+	u_long err_e_indicator ;	/* error indicator */
+	u_long err_crc ;		/* error detected (CRC or length) */
+	u_long err_llc_frame ;		/* LLC frame */
+	u_long err_mac_frame ;		/* MAC frame */
+	u_long err_smt_frame ;		/* SMT frame */
+	u_long err_imp_frame ;		/* implementer frame */
+	u_long err_no_buf ;		/* no buffer available */
+	u_long err_too_long ;		/* longer than max. buffer */
+	u_long err_bec_stat ;		/* beacon state entered */
+	u_long err_clm_stat ;		/* claim state entered */
+	u_long err_sifg_det ;		/* short interframe gap detect */
+	u_long err_phinv ;		/* PHY invalid */
+	u_long err_tkiss ;		/* token issued */
+	u_long err_tkerr ;		/* token error */
+} ;
+
+/*
+ *	Transmit Descriptor struct
+ */
+struct s_smt_fp_txd {
+	__le32 txd_tbctrl ;		/* transmit buffer control */
+	__le32 txd_txdscr ;		/* transmit frame status word */
+	__le32 txd_tbadr ;		/* physical tx buffer address */
+	__le32 txd_ntdadr ;		/* physical pointer to the next TxD */
+#ifdef	ENA_64BIT_SUP
+	__le32 txd_tbadr_hi ;		/* physical tx buffer addr (high dword)*/
+#endif
+	char far *txd_virt ;		/* virtual pointer to the data frag */
+					/* virt pointer to the next TxD */
+	struct s_smt_fp_txd volatile far *txd_next ;
+	struct s_txd_os txd_os ;	/* OS - specific struct */
+} ;
+
+/*
+ *	Receive Descriptor struct
+ */
+struct s_smt_fp_rxd {
+	__le32 rxd_rbctrl ;		/* receive buffer control */
+	__le32 rxd_rfsw ;		/* receive frame status word */
+	__le32 rxd_rbadr ;		/* physical rx buffer address */
+	__le32 rxd_nrdadr ;		/* physical pointer to the next RxD */
+#ifdef	ENA_64BIT_SUP
+	__le32 rxd_rbadr_hi ;		/* physical tx buffer addr (high dword)*/
+#endif
+	char far *rxd_virt ;		/* virtual pointer to the data frag */
+					/* virt pointer to the next RxD */
+	struct s_smt_fp_rxd volatile far *rxd_next ;
+	struct s_rxd_os rxd_os ;	/* OS - specific struct */
+} ;
+
+/*
+ *	Descriptor Union Definition
+ */
+union s_fp_descr {
+	struct	s_smt_fp_txd t ;		/* pointer to the TxD */
+	struct	s_smt_fp_rxd r ;		/* pointer to the RxD */
+} ;
+
+/*
+ *	TxD Ring Control struct
+ */
+struct s_smt_tx_queue {
+	struct s_smt_fp_txd volatile *tx_curr_put ; /* next free TxD */
+	struct s_smt_fp_txd volatile *tx_prev_put ; /* shadow put pointer */
+	struct s_smt_fp_txd volatile *tx_curr_get ; /* next TxD to release*/
+	u_short tx_free ;			/* count of free TxD's */
+	u_short tx_used ;			/* count of used TxD's */
+	HW_PTR tx_bmu_ctl ;			/* BMU addr for tx start */
+	HW_PTR tx_bmu_dsc ;			/* BMU addr for curr dsc. */
+} ;
+
+/*
+ *	RxD Ring Control struct
+ */
+struct s_smt_rx_queue {
+	struct s_smt_fp_rxd volatile *rx_curr_put ; /* next RxD to queue into */
+	struct s_smt_fp_rxd volatile *rx_prev_put ; /* shadow put pointer */
+	struct s_smt_fp_rxd volatile *rx_curr_get ; /* next RxD to fill */
+	u_short rx_free ;			/* count of free RxD's */
+	u_short rx_used ;			/* count of used RxD's */
+	HW_PTR rx_bmu_ctl ;			/* BMU addr for rx start */
+	HW_PTR rx_bmu_dsc ;			/* BMU addr for curr dsc. */
+} ;
+
+#define VOID_FRAME_OFF		0x00
+#define CLAIM_FRAME_OFF		0x08
+#define BEACON_FRAME_OFF	0x10
+#define DBEACON_FRAME_OFF	0x18
+#define RX_FIFO_OFF		0x21		/* to get a prime number for */
+						/* the RX_FIFO_SPACE */
+
+#define RBC_MEM_SIZE		0x8000
+#define SEND_ASYNC_AS_SYNC	0x1
+#define	SYNC_TRAFFIC_ON		0x2
+
+/* big FIFO memory */
+#define	RX_FIFO_SPACE		0x4000 - RX_FIFO_OFF
+#define	TX_FIFO_SPACE		0x4000
+
+#define	TX_SMALL_FIFO		0x0900
+#define	TX_MEDIUM_FIFO		TX_FIFO_SPACE / 2	
+#define	TX_LARGE_FIFO		TX_FIFO_SPACE - TX_SMALL_FIFO	
+
+#define	RX_SMALL_FIFO		0x0900
+#define	RX_LARGE_FIFO		RX_FIFO_SPACE - RX_SMALL_FIFO	
+
+struct s_smt_fifo_conf {
+	u_short	rbc_ram_start ;		/* FIFO start address */
+	u_short	rbc_ram_end ;		/* FIFO size */
+	u_short	rx1_fifo_start ;	/* rx queue start address */
+	u_short	rx1_fifo_size ;		/* rx queue size */
+	u_short	rx2_fifo_start ;	/* rx queue start address */
+	u_short	rx2_fifo_size ;		/* rx queue size */
+	u_short	tx_s_start ;		/* sync queue start address */
+	u_short	tx_s_size ;		/* sync queue size */
+	u_short	tx_a0_start ;		/* async queue A0 start address */
+	u_short	tx_a0_size ;		/* async queue A0 size */
+	u_short	fifo_config_mode ;	/* FIFO configuration mode */
+} ;
+
+#define FM_ADDRX	(FM_ADDET|FM_EXGPA0|FM_EXGPA1)
+
+struct s_smt_fp {
+	u_short	mdr2init ;		/* mode register 2 init value */
+	u_short	mdr3init ;		/* mode register 3 init value */
+	u_short frselreg_init ;		/* frame selection register init val */
+	u_short	rx_mode ;		/* address mode broad/multi/promisc */
+	u_short	nsa_mode ;
+	u_short rx_prom ;
+	u_short	exgpa ;
+
+	struct err_st err_stats ;	/* error statistics */
+
+	/*
+	 * MAC buffers
+	 */
+	struct fddi_mac_sf {		/* special frame build buffer */
+		u_char			mac_fc ;
+		struct fddi_addr	mac_dest ;
+		struct fddi_addr	mac_source ;
+		u_char			mac_info[0x20] ;
+	} mac_sfb ;
+
+
+	/*
+	 * queues
+	 */
+#define QUEUE_S			0
+#define QUEUE_A0		1
+#define QUEUE_R1		0
+#define QUEUE_R2		1
+#define USED_QUEUES		2
+
+	/*
+	 * queue pointers; points to the queue dependent variables
+	 */
+	struct s_smt_tx_queue *tx[USED_QUEUES] ;
+	struct s_smt_rx_queue *rx[USED_QUEUES] ;
+
+	/*
+	 * queue dependent variables
+	 */
+	struct s_smt_tx_queue tx_q[USED_QUEUES] ;
+	struct s_smt_rx_queue rx_q[USED_QUEUES] ;
+
+	/*
+	 * FIFO configuration struct
+	 */
+	struct	s_smt_fifo_conf	fifo ;
+
+	/* last formac status */
+	u_short	 s2u ;
+	u_short	 s2l ;
+
+	/* calculated FORMAC+ reg.addr. */
+	HW_PTR	fm_st1u ;
+	HW_PTR	fm_st1l ;
+	HW_PTR	fm_st2u ;
+	HW_PTR	fm_st2l ;
+	HW_PTR	fm_st3u ;
+	HW_PTR	fm_st3l ;
+
+
+	/*
+	 * multicast table
+	 */
+#define FPMAX_MULTICAST 32 
+#define	SMT_MAX_MULTI	4
+	struct {
+		struct s_fpmc {
+			struct fddi_addr	a ;	/* mc address */
+			u_char			n ;	/* usage counter */
+			u_char			perm ;	/* flag: permanent */
+		} table[FPMAX_MULTICAST] ;
+	} mc ;
+	struct fddi_addr	group_addr ;
+	u_long	func_addr ;		/* functional address */
+	int	smt_slots_used ;	/* count of table entries for the SMT */
+	int	os_slots_used ;		/* count of table entries */ 
+					/* used by the os-specific module */
+} ;
+
+/*
+ * modes for mac_set_rx_mode()
+ */
+#define RX_ENABLE_ALLMULTI	1	/* enable all multicasts */
+#define RX_DISABLE_ALLMULTI	2	/* disable "enable all multicasts" */
+#define RX_ENABLE_PROMISC	3	/* enable promiscuous */
+#define RX_DISABLE_PROMISC	4	/* disable promiscuous */
+#define RX_ENABLE_NSA		5	/* enable reception of NSA frames */
+#define RX_DISABLE_NSA		6	/* disable reception of NSA frames */
+
+
+/*
+ * support for byte reversal in AIX
+ * (descriptors and pointers must be byte reversed in memory
+ *  CPU is big endian; M-Channel is little endian)
+ */
+#ifdef	AIX
+#define MDR_REV
+#define	AIX_REVERSE(x)		((((x)<<24L)&0xff000000L)	+	\
+				 (((x)<< 8L)&0x00ff0000L)	+	\
+				 (((x)>> 8L)&0x0000ff00L)	+	\
+				 (((x)>>24L)&0x000000ffL))
+#else
+#ifndef AIX_REVERSE
+#define	AIX_REVERSE(x)	(x)
+#endif
+#endif
+
+#ifdef	MDR_REV	
+#define	MDR_REVERSE(x)		((((x)<<24L)&0xff000000L)	+	\
+				 (((x)<< 8L)&0x00ff0000L)	+	\
+				 (((x)>> 8L)&0x0000ff00L)	+	\
+				 (((x)>>24L)&0x000000ffL))
+#else
+#ifndef MDR_REVERSE
+#define	MDR_REVERSE(x)	(x)
+#endif
+#endif
+
+#endif
diff --git a/drivers/net/fddi/skfp/h/hwmtm.h b/drivers/net/fddi/skfp/h/hwmtm.h
new file mode 100644
index 0000000..e1a7e5f
--- /dev/null
+++ b/drivers/net/fddi/skfp/h/hwmtm.h
@@ -0,0 +1,399 @@
+/******************************************************************************
+ *
+ *	(C)Copyright 1998,1999 SysKonnect,
+ *	a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+#ifndef	_HWM_
+#define	_HWM_
+
+#include "h/mbuf.h"
+
+/*
+ * MACRO for DMA synchronization:
+ *	The descriptor 'desc' is flushed for the device 'flag'.
+ *	Devices are the CPU (DDI_DMA_SYNC_FORCPU) and the
+ *	adapter (DDI_DMA_SYNC_FORDEV).
+ *
+ *	'desc'	Pointer to a Rx or Tx descriptor.
+ *	'flag'	Flag for direction (view for CPU or DEVICE) that
+ *		should be synchronized.
+ *
+ *	Empty macros and defines are specified here. The real macro
+ *	is os-specific and should be defined in osdef1st.h.
+ */
+#ifndef DRV_BUF_FLUSH
+#define DRV_BUF_FLUSH(desc,flag)
+#define DDI_DMA_SYNC_FORCPU
+#define DDI_DMA_SYNC_FORDEV
+#endif
+
+	/*
+	 * hardware modul dependent receive modes
+	 */
+#define	RX_ENABLE_PASS_SMT	21
+#define	RX_DISABLE_PASS_SMT	22
+#define	RX_ENABLE_PASS_NSA	23
+#define	RX_DISABLE_PASS_NSA	24
+#define	RX_ENABLE_PASS_DB	25
+#define	RX_DISABLE_PASS_DB	26
+#define	RX_DISABLE_PASS_ALL	27
+#define	RX_DISABLE_LLC_PROMISC	28
+#define	RX_ENABLE_LLC_PROMISC	29
+
+
+#ifndef	DMA_RD
+#define DMA_RD		1	/* memory -> hw */
+#endif
+#ifndef DMA_WR
+#define DMA_WR		2	/* hw -> memory */
+#endif
+#define SMT_BUF		0x80
+
+	/*
+	 * bits of the frame status byte
+	 */
+#define EN_IRQ_EOF	0x02	/* get IRQ after end of frame transmission */
+#define	LOC_TX		0x04	/* send frame to the local SMT */
+#define LAST_FRAG	0x08	/* last TxD of the frame */
+#define	FIRST_FRAG	0x10	/* first TxD of the frame */
+#define	LAN_TX		0x20	/* send frame to network if set */
+#define RING_DOWN	0x40	/* error: unable to send, ring down */
+#define OUT_OF_TXD	0x80	/* error: not enough TxDs available */
+
+
+#ifndef NULL
+#define NULL 		0
+#endif
+
+#ifdef	LITTLE_ENDIAN
+#define HWM_REVERSE(x)	(x)
+#else
+#define	HWM_REVERSE(x)		((((x)<<24L)&0xff000000L)	+	\
+				 (((x)<< 8L)&0x00ff0000L)	+	\
+				 (((x)>> 8L)&0x0000ff00L)	+	\
+				 (((x)>>24L)&0x000000ffL))
+#endif
+
+#define C_INDIC		(1L<<25)
+#define A_INDIC		(1L<<26)
+#define	RD_FS_LOCAL	0x80
+
+	/*
+	 * DEBUG FLAGS
+	 */
+#define	DEBUG_SMTF	1
+#define	DEBUG_SMT	2
+#define	DEBUG_ECM	3
+#define	DEBUG_RMT	4
+#define	DEBUG_CFM	5
+#define	DEBUG_PCM	6
+#define	DEBUG_SBA	7
+#define	DEBUG_ESS	8
+
+#define	DB_HWM_RX	10
+#define	DB_HWM_TX	11
+#define DB_HWM_GEN	12
+
+struct s_mbuf_pool {
+#ifndef	MB_OUTSIDE_SMC
+	SMbuf		mb[MAX_MBUF] ;		/* mbuf pool */
+#endif
+	SMbuf		*mb_start ;		/* points to the first mb */
+	SMbuf		*mb_free ;		/* free queue */
+} ;
+
+struct hwm_r {
+	/*
+	 * hardware modul specific receive variables
+	 */
+	u_int			len ;		/* length of the whole frame */
+	char			*mb_pos ;	/* SMbuf receive position */
+} ;
+
+struct hw_modul {
+	/*
+	 * All hardware modul specific variables
+	 */
+	struct	s_mbuf_pool	mbuf_pool ;
+	struct	hwm_r	r ;
+
+	union s_fp_descr volatile *descr_p ; /* points to the desriptor area */
+
+	u_short pass_SMT ;		/* pass SMT frames */
+	u_short pass_NSA ;		/* pass all NSA frames */
+	u_short pass_DB ;		/* pass Direct Beacon Frames */
+	u_short pass_llc_promisc ;	/* pass all llc frames (default ON) */
+
+	SMbuf	*llc_rx_pipe ;		/* points to the first queued llc fr */
+	SMbuf	*llc_rx_tail ;		/* points to the last queued llc fr */
+	int	queued_rx_frames ;	/* number of queued frames */
+
+	SMbuf	*txd_tx_pipe ;		/* points to first mb in the txd ring */
+	SMbuf	*txd_tx_tail ;		/* points to last mb in the txd ring */
+	int	queued_txd_mb ;		/* number of SMT MBufs in txd ring */
+
+	int	rx_break ;		/* rev. was breaked because ind. off */
+	int	leave_isr ;		/* leave fddi_isr immedeately if set */
+	int	isr_flag ;		/* set, when HWM is entered from isr */
+	/*
+	 * variables for the current transmit frame
+	 */
+	struct s_smt_tx_queue *tx_p ;	/* pointer to the transmit queue */
+	u_long	tx_descr ;		/* tx descriptor for FORMAC+ */
+	int	tx_len ;		/* tx frame length */
+	SMbuf	*tx_mb ;		/* SMT tx MBuf pointer */
+	char	*tx_data ;		/* data pointer to the SMT tx Mbuf */
+
+	int	detec_count ;		/* counter for out of RxD condition */
+	u_long	rx_len_error ;		/* rx len FORMAC != sum of fragments */
+} ;
+
+
+/*
+ * DEBUG structs and macros
+ */
+
+#ifdef	DEBUG
+struct os_debug {
+	int	hwm_rx ;
+	int	hwm_tx ;
+	int	hwm_gen ;
+} ;
+#endif
+
+#ifdef	DEBUG
+#ifdef	DEBUG_BRD
+#define	DB_P	smc->debug
+#else
+#define DB_P	debug
+#endif
+
+#define DB_RX(a,b,c,lev) if (DB_P.d_os.hwm_rx >= (lev))	printf(a,b,c)
+#define DB_TX(a,b,c,lev) if (DB_P.d_os.hwm_tx >= (lev))	printf(a,b,c)
+#define DB_GEN(a,b,c,lev) if (DB_P.d_os.hwm_gen >= (lev)) printf(a,b,c)
+#else	/* DEBUG */
+#define DB_RX(a,b,c,lev)
+#define DB_TX(a,b,c,lev)
+#define DB_GEN(a,b,c,lev)
+#endif	/* DEBUG */
+
+#ifndef	SK_BREAK
+#define	SK_BREAK()
+#endif
+
+
+/*
+ * HWM Macros
+ */
+
+/*
+ *	BEGIN_MANUAL_ENTRY(HWM_GET_TX_PHYS)
+ *	u_long HWM_GET_TX_PHYS(txd)
+ *
+ * function	MACRO		(hardware module, hwmtm.h)
+ *		This macro may be invoked by the OS-specific module to read
+ *		the physical address of the specified TxD.
+ *
+ * para	txd	pointer to the TxD
+ *
+ *	END_MANUAL_ENTRY
+ */
+#define	HWM_GET_TX_PHYS(txd)		(u_long)AIX_REVERSE((txd)->txd_tbadr)
+
+/*
+ *	BEGIN_MANUAL_ENTRY(HWM_GET_TX_LEN)
+ *	int HWM_GET_TX_LEN(txd)
+ *
+ * function	MACRO		(hardware module, hwmtm.h)
+ *		This macro may be invoked by the OS-specific module to read
+ *		the fragment length of the specified TxD
+ *
+ * para	rxd	pointer to the TxD
+ *
+ * return	the length of the fragment in bytes
+ *
+ *	END_MANUAL_ENTRY
+ */
+#define	HWM_GET_TX_LEN(txd)	((int)AIX_REVERSE((txd)->txd_tbctrl)& RD_LENGTH)
+
+/*
+ *	BEGIN_MANUAL_ENTRY(HWM_GET_TX_USED)
+ *	txd *HWM_GET_TX_USED(smc,queue)
+ *
+ * function	MACRO		(hardware module, hwmtm.h)
+ *		This macro may be invoked by the OS-specific module to get the
+ *		number of used TxDs for the queue, specified by the index.
+ *
+ * para	queue	the number of the send queue: Can be specified by
+ *		QUEUE_A0, QUEUE_S or (frame_status & QUEUE_A0)
+ *
+ * return	number of used TxDs for this send queue
+ *
+ *	END_MANUAL_ENTRY
+ */
+#define	HWM_GET_TX_USED(smc,queue)	(int) (smc)->hw.fp.tx_q[queue].tx_used
+
+/*
+ *	BEGIN_MANUAL_ENTRY(HWM_GET_CURR_TXD)
+ *	txd *HWM_GET_CURR_TXD(smc,queue)
+ *
+ * function	MACRO		(hardware module, hwmtm.h)
+ *		This macro may be invoked by the OS-specific module to get the
+ *		pointer to the TxD which points to the current queue put
+ *		position.
+ *
+ * para	queue	the number of the send queue: Can be specified by
+ *		QUEUE_A0, QUEUE_S or (frame_status & QUEUE_A0)
+ *
+ * return	pointer to the current TxD
+ *
+ *	END_MANUAL_ENTRY
+ */
+#define	HWM_GET_CURR_TXD(smc,queue)	(struct s_smt_fp_txd volatile *)\
+					(smc)->hw.fp.tx_q[queue].tx_curr_put
+
+/*
+ *	BEGIN_MANUAL_ENTRY(HWM_GET_RX_FRAG_LEN)
+ *	int HWM_GET_RX_FRAG_LEN(rxd)
+ *
+ * function	MACRO		(hardware module, hwmtm.h)
+ *		This macro may be invoked by the OS-specific module to read
+ *		the fragment length of the specified RxD
+ *
+ * para	rxd	pointer to the RxD
+ *
+ * return	the length of the fragment in bytes
+ *
+ *	END_MANUAL_ENTRY
+ */
+#define	HWM_GET_RX_FRAG_LEN(rxd)	((int)AIX_REVERSE((rxd)->rxd_rbctrl)& \
+				RD_LENGTH)
+
+/*
+ *	BEGIN_MANUAL_ENTRY(HWM_GET_RX_PHYS)
+ *	u_long HWM_GET_RX_PHYS(rxd)
+ *
+ * function	MACRO		(hardware module, hwmtm.h)
+ *		This macro may be invoked by the OS-specific module to read
+ *		the physical address of the specified RxD.
+ *
+ * para	rxd	pointer to the RxD
+ *
+ * return	the RxD's physical pointer to the data fragment
+ *
+ *	END_MANUAL_ENTRY
+ */
+#define	HWM_GET_RX_PHYS(rxd)	(u_long)AIX_REVERSE((rxd)->rxd_rbadr)
+
+/*
+ *	BEGIN_MANUAL_ENTRY(HWM_GET_RX_USED)
+ *	int HWM_GET_RX_USED(smc)
+ *
+ * function	MACRO		(hardware module, hwmtm.h)
+ *		This macro may be invoked by the OS-specific module to get
+ *		the count of used RXDs in receive queue 1.
+ *
+ * return	the used RXD count of receive queue 1
+ *
+ * NOTE: Remember, because of an ASIC bug at least one RXD should be unused
+ *	 in the descriptor ring !
+ *
+ *	END_MANUAL_ENTRY
+ */
+#define	HWM_GET_RX_USED(smc)	((int)(smc)->hw.fp.rx_q[QUEUE_R1].rx_used)
+
+/*
+ *	BEGIN_MANUAL_ENTRY(HWM_GET_RX_FREE)
+ *	int HWM_GET_RX_FREE(smc)
+ *
+ * function	MACRO		(hardware module, hwmtm.h)
+ *		This macro may be invoked by the OS-specific module to get
+ *		the rxd_free count of receive queue 1.
+ *
+ * return	the rxd_free count of receive queue 1
+ *
+ *	END_MANUAL_ENTRY
+ */
+#define	HWM_GET_RX_FREE(smc)	((int)(smc)->hw.fp.rx_q[QUEUE_R1].rx_free-1)
+
+/*
+ *	BEGIN_MANUAL_ENTRY(HWM_GET_CURR_RXD)
+ *	rxd *HWM_GET_CURR_RXD(smc)
+ *
+ * function	MACRO		(hardware module, hwmtm.h)
+ *		This macro may be invoked by the OS-specific module to get the
+ *		pointer to the RxD which points to the current queue put
+ *		position.
+ *
+ * return	pointer to the current RxD
+ *
+ *	END_MANUAL_ENTRY
+ */
+#define	HWM_GET_CURR_RXD(smc)	(struct s_smt_fp_rxd volatile *)\
+				(smc)->hw.fp.rx_q[QUEUE_R1].rx_curr_put
+
+/*
+ *	BEGIN_MANUAL_ENTRY(HWM_RX_CHECK)
+ *	void HWM_RX_CHECK(smc,low_water)
+ *
+ * function	MACRO		(hardware module, hwmtm.h)
+ *		This macro is invoked by the OS-specific before it left the
+ *		function mac_drv_rx_complete. This macro calls mac_drv_fill_rxd
+ *		if the number of used RxDs is equal or lower than the
+ *		the given low water mark.
+ *
+ * para	low_water	low water mark of used RxD's
+ *
+ *	END_MANUAL_ENTRY
+ */
+#ifndef HWM_NO_FLOW_CTL
+#define	HWM_RX_CHECK(smc,low_water) {\
+	if ((low_water) >= (smc)->hw.fp.rx_q[QUEUE_R1].rx_used) {\
+		mac_drv_fill_rxd(smc) ;\
+	}\
+}
+#else
+#define	HWM_RX_CHECK(smc,low_water)		mac_drv_fill_rxd(smc)
+#endif
+
+#ifndef	HWM_EBASE
+#define	HWM_EBASE	500
+#endif
+
+#define	HWM_E0001	HWM_EBASE + 1
+#define	HWM_E0001_MSG	"HWM: Wrong size of s_rxd_os struct"
+#define	HWM_E0002	HWM_EBASE + 2
+#define	HWM_E0002_MSG	"HWM: Wrong size of s_txd_os struct"
+#define	HWM_E0003	HWM_EBASE + 3
+#define	HWM_E0003_MSG	"HWM: smt_free_mbuf() called with NULL pointer"
+#define	HWM_E0004	HWM_EBASE + 4
+#define	HWM_E0004_MSG	"HWM: Parity error rx queue 1"
+#define	HWM_E0005	HWM_EBASE + 5
+#define	HWM_E0005_MSG	"HWM: Encoding error rx queue 1"
+#define	HWM_E0006	HWM_EBASE + 6
+#define	HWM_E0006_MSG	"HWM: Encoding error async tx queue"
+#define	HWM_E0007	HWM_EBASE + 7
+#define	HWM_E0007_MSG	"HWM: Encoding error sync tx queue"
+#define	HWM_E0008	HWM_EBASE + 8
+#define	HWM_E0008_MSG	""
+#define	HWM_E0009	HWM_EBASE + 9
+#define	HWM_E0009_MSG	"HWM: Out of RxD condition detected"
+#define	HWM_E0010	HWM_EBASE + 10
+#define	HWM_E0010_MSG	"HWM: A protocol layer has tried to send a frame with an invalid frame control"
+#define HWM_E0011	HWM_EBASE + 11
+#define HWM_E0011_MSG	"HWM: mac_drv_clear_tx_queue was called although the hardware wasn't stopped"
+#define HWM_E0012	HWM_EBASE + 12
+#define HWM_E0012_MSG	"HWM: mac_drv_clear_rx_queue was called although the hardware wasn't stopped"
+#define HWM_E0013	HWM_EBASE + 13
+#define HWM_E0013_MSG	"HWM: mac_drv_repair_descr was called although the hardware wasn't stopped"
+
+#endif
diff --git a/drivers/net/fddi/skfp/h/mbuf.h b/drivers/net/fddi/skfp/h/mbuf.h
new file mode 100644
index 0000000..f2aadcd
--- /dev/null
+++ b/drivers/net/fddi/skfp/h/mbuf.h
@@ -0,0 +1,50 @@
+/******************************************************************************
+ *
+ *	(C)Copyright 1998,1999 SysKonnect,
+ *	a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+#ifndef	_MBUF_
+#define _MBUF_
+
+#define M_SIZE	4504
+
+#ifndef MAX_MBUF
+#define MAX_MBUF	4
+#endif
+
+#ifndef NO_STD_MBUF
+#define sm_next         m_next
+#define sm_off          m_off
+#define sm_len          m_len
+#define sm_data         m_data
+#define SMbuf           Mbuf
+#define mtod		smtod
+#define mtodoff		smtodoff
+#endif
+
+struct s_mbuf {
+	struct s_mbuf	*sm_next ;		/* low level linked list */
+	short		sm_off ;			/* offset in m_data */
+	u_int		sm_len ;			/* len of data */
+#ifdef	PCI
+	int		sm_use_count ;
+#endif
+	char		sm_data[M_SIZE] ;
+} ;
+
+typedef struct s_mbuf SMbuf ;
+
+/* mbuf head, to typed data */
+#define	smtod(x,t)	((t)((x)->sm_data + (x)->sm_off))
+#define	smtodoff(x,t,o)	((t)((x)->sm_data + (o)))
+
+#endif	/* _MBUF_ */
diff --git a/drivers/net/fddi/skfp/h/osdef1st.h b/drivers/net/fddi/skfp/h/osdef1st.h
new file mode 100644
index 0000000..763ca18
--- /dev/null
+++ b/drivers/net/fddi/skfp/h/osdef1st.h
@@ -0,0 +1,125 @@
+/******************************************************************************
+ *
+ *	(C)Copyright 1998,1999 SysKonnect,
+ *	a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/* 
+ * Operating system-dependent definitions that have to be defined
+ * before any other header files are included.
+ */
+
+// HWM (HardWare Module) Definitions
+// -----------------------
+
+#include <asm/byteorder.h>
+
+#ifdef __LITTLE_ENDIAN
+#define LITTLE_ENDIAN
+#else
+#define BIG_ENDIAN
+#endif
+
+// this is set in the makefile
+// #define PCI			/* only PCI adapters supported by this driver */
+// #define MEM_MAPPED_IO	/* use memory mapped I/O */
+
+
+#define USE_CAN_ADDR		/* DA and SA in MAC header are canonical. */
+
+#define MB_OUTSIDE_SMC		/* SMT Mbufs outside of smc struct. */
+
+// -----------------------
+
+
+// SMT Definitions 
+// -----------------------
+#define SYNC	       		/* allow synchronous frames */
+
+// #define SBA			/* Synchronous Bandwidth Allocator support */
+				/* not available as free source */
+
+#define ESS			/* SBA End Station Support */
+
+#define	SMT_PANIC(smc, nr, msg)	printk(KERN_INFO "SMT PANIC: code: %d, msg: %s\n",nr,msg)
+
+
+#ifdef DEBUG
+#define printf(s,args...) printk(KERN_INFO s, ## args)
+#endif
+
+// #define HW_PTR	u_long
+// -----------------------
+
+
+
+// HWM and OS-specific buffer definitions
+// -----------------------
+
+// default number of receive buffers.
+#define NUM_RECEIVE_BUFFERS		10
+
+// default number of transmit buffers.
+#define NUM_TRANSMIT_BUFFERS		10
+
+// Number of SMT buffers (Mbufs).
+#define NUM_SMT_BUF	4
+
+// Number of TXDs for asynchronous transmit queue.
+#define HWM_ASYNC_TXD_COUNT	(NUM_TRANSMIT_BUFFERS + NUM_SMT_BUF)
+
+// Number of TXDs for synchronous transmit queue.
+#define HWM_SYNC_TXD_COUNT	HWM_ASYNC_TXD_COUNT
+
+
+// Number of RXDs for receive queue #1.
+// Note: Workaround for ASIC Errata #7: One extra RXD is required.
+#if (NUM_RECEIVE_BUFFERS > 100)
+#define SMT_R1_RXD_COUNT	(1 + 100)
+#else
+#define SMT_R1_RXD_COUNT	(1 + NUM_RECEIVE_BUFFERS)
+#endif
+
+// Number of RXDs for receive queue #2.
+#define SMT_R2_RXD_COUNT	0	// Not used.
+// -----------------------
+
+
+
+/*
+ * OS-specific part of the transmit/receive descriptor structure (TXD/RXD).
+ *
+ * Note: The size of these structures must follow this rule:
+ *
+ *	sizeof(struct) + 2*sizeof(void*) == n * 16, n >= 1
+ *
+ * We use the dma_addr fields under Linux to keep track of the
+ * DMA address of the packet data, for later pci_unmap_single. -DaveM
+ */
+
+struct s_txd_os {	// os-specific part of transmit descriptor
+	struct sk_buff *skb;
+	dma_addr_t dma_addr;
+} ;
+
+struct s_rxd_os {	// os-specific part of receive descriptor
+	struct sk_buff *skb;
+	dma_addr_t dma_addr;
+} ;
+
+
+/*
+ * So we do not need to make too many modifications to the generic driver
+ * parts, we take advantage of the AIX byte swapping macro interface.
+ */
+
+#define AIX_REVERSE(x)		((u32)le32_to_cpu((u32)(x)))
+#define MDR_REVERSE(x)		((u32)le32_to_cpu((u32)(x)))
diff --git a/drivers/net/fddi/skfp/h/sba.h b/drivers/net/fddi/skfp/h/sba.h
new file mode 100644
index 0000000..638cf02
--- /dev/null
+++ b/drivers/net/fddi/skfp/h/sba.h
@@ -0,0 +1,142 @@
+/******************************************************************************
+ *
+ *	(C)Copyright 1998,1999 SysKonnect,
+ *	a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+ * Synchronous Bandwidth Allocation (SBA) structs
+ */
+ 
+#ifndef _SBA_
+#define _SBA_
+
+#include "h/mbuf.h"
+#include "h/sba_def.h"
+
+#ifdef	SBA
+
+/* Timer Cell Template */
+struct timer_cell {
+	struct timer_cell	*next_ptr ;
+	struct timer_cell	*prev_ptr ;
+	u_long			start_time ;
+	struct s_sba_node_vars	*node_var ;
+} ;
+
+/*
+ * Node variables
+ */
+struct s_sba_node_vars {
+	u_char			change_resp_flag ;
+	u_char			report_resp_flag ;
+	u_char			change_req_flag ;
+	u_char			report_req_flag ;
+	long			change_amount ;
+	long			node_overhead ;
+	long			node_payload ;
+	u_long			node_status ;
+	u_char			deallocate_status ;
+	u_char			timer_state ;
+	u_short			report_cnt ;
+	long			lastrep_req_tranid ;
+	struct fddi_addr	mac_address ;
+	struct s_sba_sessions 	*node_sessions ;
+	struct timer_cell	timer ;
+} ;
+
+/*
+ * Session variables
+ */
+struct s_sba_sessions {
+	u_long			deallocate_status ;
+	long			session_overhead ;
+	u_long			min_segment_size ;
+	long			session_payload ;
+	u_long			session_status ;
+	u_long			sba_category ;
+	long			lastchg_req_tranid ;
+	u_short			session_id ;
+	u_char			class ;
+	u_char			fddi2 ;
+	u_long			max_t_neg ;
+	struct s_sba_sessions	*next_session ;
+} ;
+
+struct s_sba {
+
+	struct s_sba_node_vars	node[MAX_NODES] ;
+	struct s_sba_sessions	session[MAX_SESSIONS] ;
+
+	struct s_sba_sessions	*free_session ;	/* points to the first */
+						/* free session */
+
+	struct timer_cell	*tail_timer ;	/* points to the last timer cell */
+
+	/*
+	 * variables for allocation actions
+	 */
+	long	total_payload ;		/* Total Payload */
+	long	total_overhead ;	/* Total Overhead */
+	long	sba_allocatable ;	/* allocatable sync bandwidth */
+
+	/*
+	 * RAF message receive parameters
+	 */
+	long		msg_path_index ;	/* Path Type */
+	long		msg_sba_pl_req ;	/* Payload Request */
+	long		msg_sba_ov_req ;	/* Overhead Request */
+	long		msg_mib_pl ;		/* Current Payload for this Path */
+	long		msg_mib_ov ;		/* Current Overhead for this Path*/
+	long		msg_category ;		/* Category of the Allocation */
+	u_long		msg_max_t_neg ;		/* longest T_Neg acceptable */
+	u_long		msg_min_seg_siz ;	/* minimum segement size */
+	struct smt_header	*sm ;		/* points to the rec message */
+	struct fddi_addr	*msg_alloc_addr ;	/* Allocation Address */
+
+	/*
+	 * SBA variables
+	 */
+	u_long	sba_t_neg ;		/* holds the last T_NEG */
+	long	sba_max_alloc ;		/* the parsed value of SBAAvailable */	
+
+	/*
+	 * SBA state machine variables
+	 */
+	short	sba_next_state ;	/* the next state of the SBA */
+	char	sba_command ;		/* holds the execuded SBA cmd */
+	u_char	sba_available ;		/* parsed value after possible check */
+} ;
+
+#endif	/* SBA */
+
+	/*
+	 * variables for the End Station Support
+	 */
+struct s_ess {
+
+	/*
+	 * flags and counters
+	 */
+	u_char	sync_bw_available ;	/* is set if sync bw is allocated */
+	u_char	local_sba_active ;	/* set when a local sba is available */
+	char	raf_act_timer_poll ;	/* activate the timer to send allc req */
+	char	timer_count ;		/* counts every timer function call */
+
+	SMbuf	*sba_reply_pend ;	/* local reply for the sba is pending */
+	
+	/*
+	 * variables for the ess bandwidth control
+	 */
+	long	sync_bw ;		/* holds the allocaed sync bw */
+	u_long	alloc_trans_id ;	/* trans id of the last alloc req */
+} ;
+#endif
diff --git a/drivers/net/fddi/skfp/h/sba_def.h b/drivers/net/fddi/skfp/h/sba_def.h
new file mode 100644
index 0000000..0459a09
--- /dev/null
+++ b/drivers/net/fddi/skfp/h/sba_def.h
@@ -0,0 +1,76 @@
+/******************************************************************************
+ *
+ *	(C)Copyright 1998,1999 SysKonnect,
+ *	a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+#define PHYS			0		/* physical addr */
+#define PERM_ADDR		0x80		/* permanet address */
+#define SB_STATIC		0x00000001
+#define MAX_PAYLOAD		1562
+#define PRIMARY_RING		0x00000001
+#ifndef NULL
+#define NULL			0x00
+#endif
+
+/*********************** SB_Input Variable Values ***********************/
+/*	 may be needed when ever the SBA state machine is called	*/
+
+#define UNKNOWN_SYNC_SOURCE	0x0001
+#define REQ_ALLOCATION		0x0002
+#define REPORT_RESP		0x0003
+#define CHANGE_RESP		0x0004
+#define TNEG			0x0005
+#define NIF			0x0006
+#define SB_STOP			0x0007
+#define SB_START		0x0008
+#define REPORT_TIMER		0x0009
+#define CHANGE_REQUIRED		0x000A
+
+#define DEFAULT_OV		50
+
+#ifdef SBA
+/**************************** SBA STATES *****************************/
+
+#define SBA_STANDBY		0x00000000
+#define SBA_ACTIVE		0x00000001
+#define SBA_RECOVERY		0x00000002
+#define SBA_REPORT		0x00000003
+#define SBA_CHANGE		0x00000004
+
+/**************************** OTHERS *********************************/
+
+#define FIFTY_PERCENT		50		/* bytes per second */
+#define MAX_SESSIONS		150	
+#define TWO_MINUTES		13079		/* 9.175 ms/tick */
+#define FIFTY_BYTES		50
+#define SBA_DENIED		0x0000000D
+#define I_NEED_ONE		0x00000000
+#define MAX_NODES		50
+/*#define T_REPORT		0x59682F00L*/	/* 120s/80ns in Hex */
+#define	TWO_MIN			120		/* seconds */
+#define SBA_ST_UNKNOWN		0x00000002
+#define SBA_ST_ACTIVE		0x00000001
+#define S_CLEAR			0x00000000L
+#define ZERO			0x00000000
+#define FULL			0x00000000	/* old: 0xFFFFFFFFF */
+#define S_SET			0x00000001L
+#define LOW_PRIO		0x02		/* ??????? */
+#define OK			0x01		/* ??????? */
+#define NOT_OK			0x00		/* ??????? */
+
+/****************************************/
+/* deallocate_status[ni][si] values	*/
+/****************************************/
+#define TX_CHANGE		0X00000001L
+#define PENDING			0x00000002L
+#define NONE			0X00000000L
+#endif
diff --git a/drivers/net/fddi/skfp/h/skfbi.h b/drivers/net/fddi/skfp/h/skfbi.h
new file mode 100644
index 0000000..c1ba26c
--- /dev/null
+++ b/drivers/net/fddi/skfp/h/skfbi.h
@@ -0,0 +1,1133 @@
+/******************************************************************************
+ *
+ *	(C)Copyright 1998,1999 SysKonnect,
+ *	a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+#ifndef	_SKFBI_H_
+#define	_SKFBI_H_
+
+/*
+ * FDDI-Fx (x := {I(SA), P(CI)})
+ *	address calculation & function defines
+ */
+
+/*--------------------------------------------------------------------------*/
+#ifdef	PCI
+
+/*
+ *	(DV)	= only defined for Da Vinci
+ *	(ML)	= only defined for Monalisa
+ */
+
+/*
+ * Configuration Space header
+ */
+#define	PCI_VENDOR_ID	0x00	/* 16 bit	Vendor ID */
+#define	PCI_DEVICE_ID	0x02	/* 16 bit	Device ID */
+#define	PCI_COMMAND	0x04	/* 16 bit	Command */
+#define	PCI_STATUS	0x06	/* 16 bit	Status */
+#define	PCI_REV_ID	0x08	/*  8 bit	Revision ID */
+#define	PCI_CLASS_CODE	0x09	/* 24 bit	Class Code */
+#define	PCI_CACHE_LSZ	0x0c	/*  8 bit	Cache Line Size */
+#define	PCI_LAT_TIM	0x0d	/*  8 bit	Latency Timer */
+#define	PCI_HEADER_T	0x0e	/*  8 bit	Header Type */
+#define	PCI_BIST	0x0f	/*  8 bit	Built-in selftest */
+#define	PCI_BASE_1ST	0x10	/* 32 bit	1st Base address */
+#define	PCI_BASE_2ND	0x14	/* 32 bit	2nd Base address */
+/* Byte 18..2b:	Reserved */
+#define	PCI_SUB_VID	0x2c	/* 16 bit	Subsystem Vendor ID */
+#define	PCI_SUB_ID	0x2e	/* 16 bit	Subsystem ID */
+#define	PCI_BASE_ROM	0x30	/* 32 bit	Expansion ROM Base Address */
+/* Byte 34..33:	Reserved */
+#define PCI_CAP_PTR	0x34	/*  8 bit (ML)	Capabilities Ptr */
+/* Byte 35..3b:	Reserved */
+#define	PCI_IRQ_LINE	0x3c	/*  8 bit	Interrupt Line */
+#define	PCI_IRQ_PIN	0x3d	/*  8 bit	Interrupt Pin */
+#define	PCI_MIN_GNT	0x3e	/*  8 bit	Min_Gnt */
+#define	PCI_MAX_LAT	0x3f	/*  8 bit	Max_Lat */
+/* Device Dependent Region */
+#define	PCI_OUR_REG	0x40	/* 32 bit (DV)	Our Register */
+#define	PCI_OUR_REG_1	0x40	/* 32 bit (ML)	Our Register 1 */
+#define	PCI_OUR_REG_2	0x44	/* 32 bit (ML)	Our Register 2 */
+/* Power Management Region */
+#define PCI_PM_CAP_ID	0x48	/*  8 bit (ML)	Power Management Cap. ID */
+#define PCI_PM_NITEM	0x49	/*  8 bit (ML)	Next Item Ptr */
+#define PCI_PM_CAP_REG	0x4a	/* 16 bit (ML)	Power Management Capabilities */
+#define PCI_PM_CTL_STS	0x4c	/* 16 bit (ML)	Power Manag. Control/Status */
+/* Byte 0x4e:	Reserved */
+#define PCI_PM_DAT_REG	0x4f	/*  8 bit (ML)	Power Manag. Data Register */
+/* VPD Region */
+#define	PCI_VPD_CAP_ID	0x50	/*  8 bit (ML)	VPD Cap. ID */
+#define PCI_VPD_NITEM	0x51	/*  8 bit (ML)	Next Item Ptr */
+#define PCI_VPD_ADR_REG	0x52	/* 16 bit (ML)	VPD Address Register */
+#define PCI_VPD_DAT_REG	0x54	/* 32 bit (ML)	VPD Data Register */
+/* Byte 58..ff:	Reserved */
+
+/*
+ * I2C Address (PCI Config)
+ *
+ * Note: The temperature and voltage sensors are relocated on a different
+ *	 I2C bus.
+ */
+#define I2C_ADDR_VPD	0xA0	/* I2C address for the VPD EEPROM */ 
+
+/*
+ * Define Bits and Values of the registers
+ */
+/*	PCI_VENDOR_ID	16 bit	Vendor ID */
+/*	PCI_DEVICE_ID	16 bit	Device ID */
+/* Values for Vendor ID and Device ID shall be patched into the code */
+/*	PCI_COMMAND	16 bit	Command */
+#define	PCI_FBTEN	0x0200	/* Bit 9:	Fast Back-To-Back enable */
+#define	PCI_SERREN	0x0100	/* Bit 8:	SERR enable */
+#define	PCI_ADSTEP	0x0080	/* Bit 7:	Address Stepping */
+#define	PCI_PERREN	0x0040	/* Bit 6:	Parity Report Response enable */
+#define	PCI_VGA_SNOOP	0x0020	/* Bit 5:	VGA palette snoop */
+#define	PCI_MWIEN	0x0010	/* Bit 4:	Memory write an inv cycl ena */
+#define	PCI_SCYCEN	0x0008	/* Bit 3:	Special Cycle enable */
+#define	PCI_BMEN	0x0004	/* Bit 2:	Bus Master enable */
+#define	PCI_MEMEN	0x0002	/* Bit 1:	Memory Space Access enable */
+#define	PCI_IOEN	0x0001	/* Bit 0:	IO Space Access enable */
+
+/*	PCI_STATUS	16 bit	Status */
+#define	PCI_PERR	0x8000	/* Bit 15:	Parity Error */
+#define	PCI_SERR	0x4000	/* Bit 14:	Signaled SERR */
+#define	PCI_RMABORT	0x2000	/* Bit 13:	Received Master Abort */
+#define	PCI_RTABORT	0x1000	/* Bit 12:	Received Target Abort */
+#define	PCI_STABORT	0x0800	/* Bit 11:	Sent Target Abort */
+#define	PCI_DEVSEL	0x0600	/* Bit 10..9:	DEVSEL Timing */
+#define	PCI_DEV_FAST	(0<<9)	/*		fast */
+#define	PCI_DEV_MEDIUM	(1<<9)	/*		medium */
+#define	PCI_DEV_SLOW	(2<<9)	/*		slow */
+#define	PCI_DATAPERR	0x0100	/* Bit 8:	DATA Parity error detected */
+#define	PCI_FB2BCAP	0x0080	/* Bit 7:	Fast Back-to-Back Capability */
+#define	PCI_UDF		0x0040	/* Bit 6:	User Defined Features */
+#define PCI_66MHZCAP	0x0020	/* Bit 5:	66 MHz PCI bus clock capable */
+#define PCI_NEWCAP	0x0010	/* Bit 4:	New cap. list implemented */
+
+#define PCI_ERRBITS	(PCI_PERR|PCI_SERR|PCI_RMABORT|PCI_STABORT|PCI_DATAPERR)
+
+/*	PCI_REV_ID	8 bit	Revision ID */
+/*	PCI_CLASS_CODE	24 bit	Class Code */
+/*	Byte 2:		Base Class		(02) */
+/*	Byte 1:		SubClass		(02) */
+/*	Byte 0:		Programming Interface	(00) */
+
+/*	PCI_CACHE_LSZ	8 bit	Cache Line Size */
+/*	Possible values: 0,2,4,8,16	*/
+
+/*	PCI_LAT_TIM	8 bit	Latency Timer */
+
+/*	PCI_HEADER_T	8 bit	Header Type */
+#define	PCI_HD_MF_DEV	0x80	/* Bit 7:	0= single, 1= multi-func dev */
+#define	PCI_HD_TYPE	0x7f	/* Bit 6..0:	Header Layout 0= normal */
+
+/*	PCI_BIST	8 bit	Built-in selftest */
+#define	PCI_BIST_CAP	0x80	/* Bit 7:	BIST Capable */
+#define	PCI_BIST_ST	0x40	/* Bit 6:	Start BIST */
+#define	PCI_BIST_RET	0x0f	/* Bit 3..0:	Completion Code */
+
+/*	PCI_BASE_1ST	32 bit	1st Base address */
+#define	PCI_MEMSIZE	0x800L       /* use 2 kB Memory Base */
+#define	PCI_MEMBASE_BITS 0xfffff800L /* Bit 31..11:	Memory Base Address */
+#define	PCI_MEMSIZE_BIIS 0x000007f0L /* Bit 10..4:	Memory Size Req. */
+#define	PCI_PREFEN	0x00000008L  /* Bit 3:		Prefetchable */
+#define	PCI_MEM_TYP	0x00000006L  /* Bit 2..1:	Memory Type */
+#define	PCI_MEM32BIT	(0<<1)	     /* Base addr anywhere in 32 Bit range */
+#define	PCI_MEM1M	(1<<1)	     /* Base addr below 1 MegaByte */
+#define	PCI_MEM64BIT	(2<<1)	     /* Base addr anywhere in 64 Bit range */
+#define	PCI_MEMSPACE	0x00000001L  /* Bit 0:	Memory Space Indic. */
+
+/*	PCI_BASE_2ND	32 bit	2nd Base address */
+#define	PCI_IOBASE	0xffffff00L  /* Bit 31..8:  I/O Base address */
+#define	PCI_IOSIZE	0x000000fcL  /* Bit 7..2:   I/O Size Requirements */
+#define	PCI_IOSPACE	0x00000001L  /* Bit 0:	    I/O Space Indicator */
+
+/*	PCI_SUB_VID	16 bit	Subsystem Vendor ID */
+/*	PCI_SUB_ID	16 bit	Subsystem ID */
+
+/*	PCI_BASE_ROM	32 bit	Expansion ROM Base Address */
+#define	PCI_ROMBASE	0xfffe0000L  /* Bit 31..17: ROM BASE address (1st) */
+#define	PCI_ROMBASZ	0x0001c000L  /* Bit 16..14: Treat as BASE or SIZE */
+#define	PCI_ROMSIZE	0x00003800L  /* Bit 13..11: ROM Size Requirements */
+#define	PCI_ROMEN	0x00000001L  /* Bit 0:	    Address Decode enable */
+
+/*	PCI_CAP_PTR	8 bit	New Capabilities Pointers */
+/*	PCI_IRQ_LINE	8 bit	Interrupt Line */
+/*	PCI_IRQ_PIN	8 bit	Interrupt Pin */
+/*	PCI_MIN_GNT	8 bit	Min_Gnt */
+/*	PCI_MAX_LAT	8 bit	Max_Lat */
+/* Device Dependent Region */
+/*	PCI_OUR_REG	(DV)	32 bit	Our Register */
+/*	PCI_OUR_REG_1	(ML)	32 bit	Our Register 1 */
+				  /*	 Bit 31..29:	reserved */
+#define	PCI_PATCH_DIR	(3L<<27)  /*(DV) Bit 28..27:	Ext Patchs direction */
+#define PCI_PATCH_DIR_0	(1L<<27)  /*(DV) Type of the pins EXT_PATCHS<1..0>   */
+#define PCI_PATCH_DIR_1 (1L<<28)  /*	   0 = input			     */
+				  /*	   1 = output			     */
+#define	PCI_EXT_PATCHS	(3L<<25)  /*(DV) Bit 26..25:	Extended Patches     */
+#define PCI_EXT_PATCH_0 (1L<<25)  /*(DV)				     */
+#define PCI_EXT_PATCH_1 (1L<<26)  /*	 CLK for MicroWire (ML)		     */
+#define PCI_VIO		(1L<<25)  /*(ML)				     */
+#define	PCI_EN_BOOT	(1L<<24)  /*	 Bit 24:	Enable BOOT via ROM  */
+				  /*	   1 = Don't boot with ROM	     */
+				  /*	   0 = Boot with ROM		     */
+#define	PCI_EN_IO	(1L<<23)  /*	 Bit 23:	Mapping to IO space  */
+#define	PCI_EN_FPROM	(1L<<22)  /*	 Bit 22:	FLASH mapped to mem? */
+				  /*	   1 = Map Flash to Memory	     */
+			  	  /*	   0 = Disable all addr. decoding    */
+#define	PCI_PAGESIZE	(3L<<20)  /*	 Bit 21..20:	FLASH Page Size	     */
+#define	PCI_PAGE_16	(0L<<20)  /*		16 k pages		     */
+#define	PCI_PAGE_32K	(1L<<20)  /*		32 k pages		     */
+#define	PCI_PAGE_64K	(2L<<20)  /*		64 k pages		     */
+#define	PCI_PAGE_128K	(3L<<20)  /*		128 k pages		     */
+				  /*	 Bit 19: reserved (ML) and (DV)	     */
+#define	PCI_PAGEREG	(7L<<16)  /*	 Bit 18..16:	Page Register	     */
+				  /*	 Bit 15:	reserved	     */
+#define	PCI_FORCE_BE	(1L<<14)  /*	 Bit 14:	Assert all BEs on MR */
+#define	PCI_DIS_MRL	(1L<<13)  /*	 Bit 13:	Disable Mem R Line   */
+#define	PCI_DIS_MRM	(1L<<12)  /*	 Bit 12:	Disable Mem R multip */
+#define	PCI_DIS_MWI	(1L<<11)  /*	 Bit 11:	Disable Mem W & inv  */
+#define	PCI_DISC_CLS	(1L<<10)  /*	 Bit 10:	Disc: cacheLsz bound */
+#define	PCI_BURST_DIS	(1L<<9)	  /*	 Bit  9:	Burst Disable	     */
+#define	PCI_BYTE_SWAP	(1L<<8)	  /*(DV) Bit  8:	Byte Swap in DATA    */
+#define	PCI_SKEW_DAS	(0xfL<<4) /*	 Bit 7..4:	Skew Ctrl, DAS Ext   */
+#define	PCI_SKEW_BASE	(0xfL<<0) /*	 Bit 3..0:	Skew Ctrl, Base	     */
+
+/*	PCI_OUR_REG_2	(ML)	32 bit	Our Register 2 (Monalisa only) */
+#define PCI_VPD_WR_TH	(0xffL<<24)	/* Bit 24..31	VPD Write Threshold  */
+#define	PCI_DEV_SEL	(0x7fL<<17)	/* Bit 17..23	EEPROM Device Select */
+#define	PCI_VPD_ROM_SZ	(7L<<14)	/* Bit 14..16	VPD ROM Size	     */
+					/* Bit 12..13	reserved	     */
+#define	PCI_PATCH_DIR2	(0xfL<<8)	/* Bit  8..11	Ext Patchs dir 2..5  */
+#define	PCI_PATCH_DIR_2	(1L<<8)		/* Bit  8	CS for MicroWire     */
+#define	PCI_PATCH_DIR_3	(1L<<9)
+#define	PCI_PATCH_DIR_4	(1L<<10)
+#define	PCI_PATCH_DIR_5	(1L<<11)
+#define PCI_EXT_PATCHS2 (0xfL<<4)	/* Bit  4..7	Extended Patches     */
+#define	PCI_EXT_PATCH_2	(1L<<4)		/* Bit  4	CS for MicroWire     */
+#define	PCI_EXT_PATCH_3	(1L<<5)
+#define	PCI_EXT_PATCH_4	(1L<<6)
+#define	PCI_EXT_PATCH_5	(1L<<7)
+#define	PCI_EN_DUMMY_RD	(1L<<3)		/* Bit  3	Enable Dummy Read    */
+#define PCI_REV_DESC	(1L<<2)		/* Bit  2	Reverse Desc. Bytes  */
+#define PCI_USEADDR64	(1L<<1)		/* Bit  1	Use 64 Bit Addresse  */
+#define PCI_USEDATA64	(1L<<0)		/* Bit  0	Use 64 Bit Data bus ext*/
+
+/* Power Management Region */
+/*	PCI_PM_CAP_ID		 8 bit (ML)	Power Management Cap. ID */
+/*	PCI_PM_NITEM		 8 bit (ML)	Next Item Ptr */
+/*	PCI_PM_CAP_REG		16 bit (ML)	Power Management Capabilities*/
+#define	PCI_PME_SUP	(0x1f<<11)	/* Bit 11..15	PM Manag. Event Support*/
+#define PCI_PM_D2_SUB	(1<<10)		/* Bit 10	D2 Support Bit	     */
+#define PCI_PM_D1_SUB	(1<<9)		/* Bit 9	D1 Support Bit       */
+					/* Bit 6..8 reserved		     */
+#define PCI_PM_DSI	(1<<5)		/* Bit 5	Device Specific Init.*/
+#define PCI_PM_APS	(1<<4)		/* Bit 4	Auxialiary Power Src */
+#define PCI_PME_CLOCK	(1<<3)		/* Bit 3	PM Event Clock       */
+#define PCI_PM_VER	(7<<0)		/* Bit 0..2	PM PCI Spec. version */
+
+/*	PCI_PM_CTL_STS		16 bit (ML)	Power Manag. Control/Status  */
+#define	PCI_PME_STATUS	(1<<15)		/* Bit 15 	PFA doesn't sup. PME#*/
+#define PCI_PM_DAT_SCL	(3<<13)		/* Bit 13..14	dat reg Scaling factor */
+#define PCI_PM_DAT_SEL	(0xf<<9)	/* Bit  9..12	PM data selector field */
+					/* Bit  7.. 2	reserved	     */
+#define PCI_PM_STATE	(3<<0)		/* Bit  0.. 1	Power Management State */
+#define PCI_PM_STATE_D0	(0<<0)		/* D0:	Operational (default) */
+#define	PCI_PM_STATE_D1	(1<<0)		/* D1:	not supported */
+#define PCI_PM_STATE_D2	(2<<0)		/* D2:	not supported */
+#define PCI_PM_STATE_D3 (3<<0)		/* D3:	HOT, Power Down and Reset */
+
+/*	PCI_PM_DAT_REG		 8 bit (ML)	Power Manag. Data Register */
+/* VPD Region */
+/*	PCI_VPD_CAP_ID		 8 bit (ML)	VPD Cap. ID */
+/*	PCI_VPD_NITEM		 8 bit (ML)	Next Item Ptr */
+/*	PCI_VPD_ADR_REG		16 bit (ML)	VPD Address Register */
+#define	PCI_VPD_FLAG	(1<<15)		/* Bit 15	starts VPD rd/wd cycle*/
+
+/*	PCI_VPD_DAT_REG		32 bit (ML)	VPD Data Register */
+
+/*
+ *	Control Register File:
+ *	Bank 0
+ */
+#define	B0_RAP		0x0000	/*  8 bit register address port */
+	/* 0x0001 - 0x0003:	reserved */
+#define	B0_CTRL		0x0004	/*  8 bit control register */
+#define	B0_DAS		0x0005	/*  8 Bit control register (DAS) */
+#define	B0_LED		0x0006	/*  8 Bit LED register */
+#define	B0_TST_CTRL	0x0007	/*  8 bit test control register */
+#define	B0_ISRC		0x0008	/* 32 bit Interrupt source register */
+#define	B0_IMSK		0x000c	/* 32 bit Interrupt mask register */
+
+/* 0x0010 - 0x006b:	formac+ (supernet_3) fequently used registers */
+#define B0_CMDREG1	0x0010	/* write command reg 1 instruction */
+#define B0_CMDREG2	0x0014	/* write command reg 2 instruction */
+#define B0_ST1U		0x0010	/* read upper 16-bit of status reg 1 */
+#define B0_ST1L		0x0014	/* read lower 16-bit of status reg 1 */
+#define B0_ST2U		0x0018	/* read upper 16-bit of status reg 2 */
+#define B0_ST2L		0x001c	/* read lower 16-bit of status reg 2 */
+
+#define B0_MARR		0x0020	/* r/w the memory read addr register */
+#define B0_MARW		0x0024	/* r/w the memory write addr register*/
+#define B0_MDRU		0x0028	/* r/w upper 16-bit of mem. data reg */
+#define B0_MDRL		0x002c	/* r/w lower 16-bit of mem. data reg */
+
+#define	B0_MDREG3	0x0030	/* r/w Mode Register 3 */
+#define	B0_ST3U		0x0034	/* read upper 16-bit of status reg 3 */
+#define	B0_ST3L		0x0038	/* read lower 16-bit of status reg 3 */
+#define	B0_IMSK3U	0x003c	/* r/w upper 16-bit of IMSK reg 3 */
+#define	B0_IMSK3L	0x0040	/* r/w lower 16-bit of IMSK reg 3 */
+#define	B0_IVR		0x0044	/* read Interrupt Vector register */
+#define	B0_IMR		0x0048	/* r/w Interrupt mask register */
+/* 0x4c	Hidden */
+
+#define B0_CNTRL_A	0x0050	/* control register A (r/w) */
+#define B0_CNTRL_B	0x0054	/* control register B (r/w) */
+#define B0_INTR_MASK	0x0058	/* interrupt mask (r/w) */
+#define B0_XMIT_VECTOR	0x005c	/* transmit vector register (r/w) */
+
+#define B0_STATUS_A	0x0060	/* status register A (read only) */
+#define B0_STATUS_B	0x0064	/* status register B (read only) */
+#define B0_CNTRL_C	0x0068	/* control register C (r/w) */
+#define	B0_MDREG1	0x006c	/* r/w Mode Register 1 */
+
+#define	B0_R1_CSR	0x0070	/* 32 bit BMU control/status reg (rec q 1) */
+#define	B0_R2_CSR	0x0074	/* 32 bit BMU control/status reg (rec q 2)(DV)*/
+#define	B0_XA_CSR	0x0078	/* 32 bit BMU control/status reg (a xmit q) */
+#define	B0_XS_CSR	0x007c	/* 32 bit BMU control/status reg (s xmit q) */
+
+/*
+ *	Bank 1
+ *	- completely empty (this is the RAP Block window)
+ *	Note: if RAP = 1 this page is reserved
+ */
+
+/*
+ *	Bank 2
+ */
+#define	B2_MAC_0	0x0100	/*  8 bit MAC address Byte 0 */
+#define	B2_MAC_1	0x0101	/*  8 bit MAC address Byte 1 */
+#define	B2_MAC_2	0x0102	/*  8 bit MAC address Byte 2 */
+#define	B2_MAC_3	0x0103	/*  8 bit MAC address Byte 3 */
+#define	B2_MAC_4	0x0104	/*  8 bit MAC address Byte 4 */
+#define	B2_MAC_5	0x0105	/*  8 bit MAC address Byte 5 */
+#define	B2_MAC_6	0x0106	/*  8 bit MAC address Byte 6 (== 0) (DV) */
+#define	B2_MAC_7	0x0107	/*  8 bit MAC address Byte 7 (== 0) (DV) */
+
+#define B2_CONN_TYP	0x0108	/*  8 bit Connector type */
+#define B2_PMD_TYP	0x0109	/*  8 bit PMD type */
+				/* 0x010a - 0x010b:	reserved */
+	/* Eprom registers are currently of no use */
+#define B2_E_0		0x010c	/*  8 bit EPROM Byte 0 */
+#define B2_E_1		0x010d	/*  8 bit EPROM Byte 1 */
+#define B2_E_2		0x010e	/*  8 bit EPROM Byte 2 */
+#define B2_E_3		0x010f	/*  8 bit EPROM Byte 3 */
+#define B2_FAR		0x0110	/* 32 bit Flash-Prom Address Register/Counter */
+#define B2_FDP		0x0114	/*  8 bit Flash-Prom Data Port */
+				/* 0x0115 - 0x0117:	reserved */
+#define B2_LD_CRTL	0x0118	/*  8 bit loader control */
+#define B2_LD_TEST	0x0119	/*  8 bit loader test */
+				/* 0x011a - 0x011f:	reserved */
+#define B2_TI_INI	0x0120	/* 32 bit Timer init value */
+#define B2_TI_VAL	0x0124	/* 32 bit Timer value */
+#define B2_TI_CRTL	0x0128	/*  8 bit Timer control */
+#define B2_TI_TEST	0x0129	/*  8 Bit Timer Test */
+				/* 0x012a - 0x012f:	reserved */
+#define B2_WDOG_INI	0x0130	/* 32 bit Watchdog init value */
+#define B2_WDOG_VAL	0x0134	/* 32 bit Watchdog value */
+#define B2_WDOG_CRTL	0x0138	/*  8 bit Watchdog control */
+#define B2_WDOG_TEST	0x0139	/*  8 Bit Watchdog Test */
+				/* 0x013a - 0x013f:	reserved */
+#define B2_RTM_INI	0x0140	/* 32 bit RTM init value */
+#define B2_RTM_VAL	0x0144	/* 32 bit RTM value */
+#define B2_RTM_CRTL	0x0148	/*  8 bit RTM control */
+#define B2_RTM_TEST	0x0149	/*  8 Bit RTM Test */
+
+#define B2_TOK_COUNT	0x014c	/* (ML)	32 bit	Token Counter */
+#define B2_DESC_ADDR_H	0x0150	/* (ML) 32 bit	Desciptor Base Addr Reg High */
+#define B2_CTRL_2	0x0154	/* (ML)	 8 bit	Control Register 2 */
+#define B2_IFACE_REG	0x0155	/* (ML)	 8 bit	Interface Register */
+				/* 0x0156:		reserved */
+#define B2_TST_CTRL_2	0x0157	/* (ML)  8 bit	Test Control Register 2 */
+#define B2_I2C_CTRL	0x0158	/* (ML)	32 bit	I2C Control Register */
+#define B2_I2C_DATA	0x015c	/* (ML) 32 bit	I2C Data Register */
+
+#define B2_IRQ_MOD_INI	0x0160	/* (ML) 32 bit	IRQ Moderation Timer Init Reg. */
+#define B2_IRQ_MOD_VAL	0x0164	/* (ML)	32 bit	IRQ Moderation Timer Value */
+#define B2_IRQ_MOD_CTRL	0x0168	/* (ML)  8 bit	IRQ Moderation Timer Control */
+#define B2_IRQ_MOD_TEST	0x0169	/* (ML)	 8 bit	IRQ Moderation Timer Test */
+				/* 0x016a - 0x017f:	reserved */
+
+/*
+ *	Bank 3
+ */
+/*
+ * This is a copy of the Configuration register file (lower half)
+ */
+#define B3_CFG_SPC	0x180
+
+/*
+ *	Bank 4
+ */
+#define B4_R1_D		0x0200	/* 	4*32 bit current receive Descriptor  */
+#define B4_R1_DA	0x0210	/* 	32 bit current rec desc address	     */
+#define B4_R1_AC	0x0214	/* 	32 bit current receive Address Count */
+#define B4_R1_BC	0x0218	/*	32 bit current receive Byte Counter  */
+#define B4_R1_CSR	0x021c	/* 	32 bit BMU Control/Status Register   */
+#define B4_R1_F		0x0220	/* 	32 bit flag register		     */
+#define B4_R1_T1	0x0224	/* 	32 bit Test Register 1		     */
+#define B4_R1_T1_TR	0x0224	/* 	8 bit Test Register 1 TR	     */
+#define B4_R1_T1_WR	0x0225	/* 	8 bit Test Register 1 WR	     */
+#define B4_R1_T1_RD	0x0226	/* 	8 bit Test Register 1 RD	     */
+#define B4_R1_T1_SV	0x0227	/* 	8 bit Test Register 1 SV	     */
+#define B4_R1_T2	0x0228	/* 	32 bit Test Register 2		     */
+#define B4_R1_T3	0x022c	/* 	32 bit Test Register 3		     */
+#define B4_R1_DA_H	0x0230	/* (ML)	32 bit Curr Rx Desc Address High     */
+#define B4_R1_AC_H	0x0234	/* (ML)	32 bit Curr Addr Counter High dword  */
+				/* 0x0238 - 0x023f:	reserved	  */
+				/* Receive queue 2 is removed on Monalisa */
+#define B4_R2_D		0x0240	/* 4*32 bit current receive Descriptor	(q2) */
+#define B4_R2_DA	0x0250	/* 32 bit current rec desc address	(q2) */
+#define B4_R2_AC	0x0254	/* 32 bit current receive Address Count	(q2) */
+#define B4_R2_BC	0x0258	/* 32 bit current receive Byte Counter	(q2) */
+#define B4_R2_CSR	0x025c	/* 32 bit BMU Control/Status Register	(q2) */
+#define B4_R2_F		0x0260	/* 32 bit flag register			(q2) */
+#define B4_R2_T1	0x0264	/* 32 bit Test Register 1		(q2) */
+#define B4_R2_T1_TR	0x0264	/* 8 bit Test Register 1 TR		(q2) */
+#define B4_R2_T1_WR	0x0265	/* 8 bit Test Register 1 WR		(q2) */
+#define B4_R2_T1_RD	0x0266	/* 8 bit Test Register 1 RD		(q2) */
+#define B4_R2_T1_SV	0x0267	/* 8 bit Test Register 1 SV		(q2) */
+#define B4_R2_T2	0x0268	/* 32 bit Test Register 2		(q2) */
+#define B4_R2_T3	0x026c	/* 32 bit Test Register 3		(q2) */
+				/* 0x0270 - 0x027c:	reserved */
+
+/*
+ *	Bank 5
+ */
+#define B5_XA_D		0x0280	/* 4*32 bit current transmit Descriptor	(xa) */
+#define B5_XA_DA	0x0290	/* 32 bit current tx desc address	(xa) */
+#define B5_XA_AC	0x0294	/* 32 bit current tx Address Count	(xa) */
+#define B5_XA_BC	0x0298	/* 32 bit current tx Byte Counter	(xa) */
+#define B5_XA_CSR	0x029c	/* 32 bit BMU Control/Status Register	(xa) */
+#define B5_XA_F		0x02a0	/* 32 bit flag register			(xa) */
+#define B5_XA_T1	0x02a4	/* 32 bit Test Register 1		(xa) */
+#define B5_XA_T1_TR	0x02a4	/* 8 bit Test Register 1 TR		(xa) */
+#define B5_XA_T1_WR	0x02a5	/* 8 bit Test Register 1 WR		(xa) */
+#define B5_XA_T1_RD	0x02a6	/* 8 bit Test Register 1 RD		(xa) */
+#define B5_XA_T1_SV	0x02a7	/* 8 bit Test Register 1 SV		(xa) */
+#define B5_XA_T2	0x02a8	/* 32 bit Test Register 2		(xa) */
+#define B5_XA_T3	0x02ac	/* 32 bit Test Register 3		(xa) */
+#define B5_XA_DA_H	0x02b0	/* (ML)	32 bit Curr Tx Desc Address High     */
+#define B5_XA_AC_H	0x02b4	/* (ML)	32 bit Curr Addr Counter High dword  */
+				/* 0x02b8 - 0x02bc:	reserved */
+#define B5_XS_D		0x02c0	/* 4*32 bit current transmit Descriptor	(xs) */
+#define B5_XS_DA	0x02d0	/* 32 bit current tx desc address	(xs) */
+#define B5_XS_AC	0x02d4	/* 32 bit current transmit Address Count(xs) */
+#define B5_XS_BC	0x02d8	/* 32 bit current transmit Byte Counter	(xs) */
+#define B5_XS_CSR	0x02dc	/* 32 bit BMU Control/Status Register	(xs) */
+#define B5_XS_F		0x02e0	/* 32 bit flag register			(xs) */
+#define B5_XS_T1	0x02e4	/* 32 bit Test Register 1		(xs) */
+#define B5_XS_T1_TR	0x02e4	/* 8 bit Test Register 1 TR		(xs) */
+#define B5_XS_T1_WR	0x02e5	/* 8 bit Test Register 1 WR		(xs) */
+#define B5_XS_T1_RD	0x02e6	/* 8 bit Test Register 1 RD		(xs) */
+#define B5_XS_T1_SV	0x02e7	/* 8 bit Test Register 1 SV		(xs) */
+#define B5_XS_T2	0x02e8	/* 32 bit Test Register 2		(xs) */
+#define B5_XS_T3	0x02ec	/* 32 bit Test Register 3		(xs) */
+#define B5_XS_DA_H	0x02f0	/* (ML)	32 bit Curr Tx Desc Address High     */
+#define B5_XS_AC_H	0x02f4	/* (ML)	32 bit Curr Addr Counter High dword  */
+				/* 0x02f8 - 0x02fc:	reserved */
+
+/*
+ *	Bank 6
+ */
+/* External PLC-S registers (SN2 compatibility for DV) */
+/* External registers (ML) */
+#define B6_EXT_REG	0x300
+
+/*
+ *	Bank 7
+ */
+/* DAS PLC-S Registers */
+
+/*
+ *	Bank 8 - 15
+ */
+/* IFCP registers */
+
+/*---------------------------------------------------------------------------*/
+/* Definitions of the Bits in the registers */
+
+/*	B0_RAP		16 bit register address port */
+#define	RAP_RAP		0x0f	/* Bit 3..0:	0 = block0, .., f = block15 */
+
+/*	B0_CTRL		8 bit control register */
+#define CTRL_FDDI_CLR	(1<<7)	/* Bit 7: (ML)	Clear FDDI Reset */
+#define CTRL_FDDI_SET	(1<<6)	/* Bit 6: (ML)	Set FDDI Reset */
+#define	CTRL_HPI_CLR	(1<<5)	/* Bit 5:	Clear HPI SM reset */
+#define	CTRL_HPI_SET	(1<<4)	/* Bit 4:	Set HPI SM reset */
+#define	CTRL_MRST_CLR	(1<<3)	/* Bit 3:	Clear Master reset */
+#define	CTRL_MRST_SET	(1<<2)	/* Bit 2:	Set Master reset */
+#define	CTRL_RST_CLR	(1<<1)	/* Bit 1:	Clear Software reset */
+#define	CTRL_RST_SET	(1<<0)	/* Bit 0:	Set Software reset */
+
+/*	B0_DAS		8 Bit control register (DAS) */
+#define BUS_CLOCK	(1<<7)	/* Bit 7: (ML)	Bus Clock 0/1 = 33/66MHz */
+#define BUS_SLOT_SZ	(1<<6)	/* Bit 6: (ML)	Slot Size 0/1 = 32/64 bit slot*/
+				/* Bit 5..4:	reserved */
+#define	DAS_AVAIL	(1<<3)	/* Bit 3:	1 = DAS, 0 = SAS */
+#define DAS_BYP_ST	(1<<2)	/* Bit 2:	1 = avail,SAS, 0 = not avail */
+#define DAS_BYP_INS	(1<<1)	/* Bit 1:	1 = insert Bypass */
+#define DAS_BYP_RMV	(1<<0)	/* Bit 0:	1 = remove Bypass */
+
+/*	B0_LED		8 Bit LED register */
+				/* Bit 7..6:	reserved */
+#define LED_2_ON	(1<<5)	/* Bit 5:	1 = switch LED_2 on (left,gn)*/
+#define LED_2_OFF	(1<<4)	/* Bit 4:	1 = switch LED_2 off */
+#define LED_1_ON	(1<<3)	/* Bit 3:	1 = switch LED_1 on (mid,yel)*/
+#define LED_1_OFF	(1<<2)	/* Bit 2:	1 = switch LED_1 off */
+#define LED_0_ON	(1<<1)	/* Bit 1:	1 = switch LED_0 on (rght,gn)*/
+#define LED_0_OFF	(1<<0)	/* Bit 0:	1 = switch LED_0 off */
+/* This hardware defines are very ugly therefore we define some others */
+
+#define LED_GA_ON	LED_2_ON	/* S port = A port */
+#define LED_GA_OFF	LED_2_OFF	/* S port = A port */
+#define LED_MY_ON	LED_1_ON
+#define LED_MY_OFF	LED_1_OFF
+#define LED_GB_ON	LED_0_ON
+#define LED_GB_OFF	LED_0_OFF
+
+/*	B0_TST_CTRL	8 bit test control register */
+#define	TST_FRC_DPERR_MR	(1<<7)	/* Bit 7:  force DATAPERR on MST RE. */
+#define	TST_FRC_DPERR_MW	(1<<6)	/* Bit 6:  force DATAPERR on MST WR. */
+#define	TST_FRC_DPERR_TR	(1<<5)	/* Bit 5:  force DATAPERR on TRG RE. */
+#define	TST_FRC_DPERR_TW	(1<<4)	/* Bit 4:  force DATAPERR on TRG WR. */
+#define	TST_FRC_APERR_M		(1<<3)	/* Bit 3:  force ADDRPERR on MST     */
+#define	TST_FRC_APERR_T		(1<<2)	/* Bit 2:  force ADDRPERR on TRG     */
+#define	TST_CFG_WRITE_ON	(1<<1)	/* Bit 1:  ena configuration reg. WR */
+#define	TST_CFG_WRITE_OFF	(1<<0)	/* Bit 0:  dis configuration reg. WR */
+
+/*	B0_ISRC		32 bit Interrupt source register */
+					/* Bit 31..28:	reserved	     */
+#define IS_I2C_READY	(1L<<27)	/* Bit 27: (ML)	IRQ on end of I2C tx */
+#define IS_IRQ_SW	(1L<<26)	/* Bit 26: (ML)	SW forced IRQ	     */
+#define IS_EXT_REG	(1L<<25)	/* Bit 25: (ML) IRQ from external reg*/
+#define	IS_IRQ_STAT	(1L<<24)	/* Bit 24:	IRQ status exception */
+					/*   PERR, RMABORT, RTABORT DATAPERR */
+#define	IS_IRQ_MST_ERR	(1L<<23)	/* Bit 23:	IRQ master error     */
+					/*   RMABORT, RTABORT, DATAPERR	     */
+#define	IS_TIMINT	(1L<<22)	/* Bit 22:	IRQ_TIMER	*/
+#define	IS_TOKEN	(1L<<21)	/* Bit 21:	IRQ_RTM		*/
+/*
+ * Note: The DAS is our First Port (!=PA)
+ */
+#define	IS_PLINT1	(1L<<20)	/* Bit 20:	IRQ_PHY_DAS	*/
+#define	IS_PLINT2	(1L<<19)	/* Bit 19:	IRQ_IFCP_4	*/
+#define	IS_MINTR3	(1L<<18)	/* Bit 18:	IRQ_IFCP_3/IRQ_PHY */
+#define	IS_MINTR2	(1L<<17)	/* Bit 17:	IRQ_IFCP_2/IRQ_MAC_2 */
+#define	IS_MINTR1	(1L<<16)	/* Bit 16:	IRQ_IFCP_1/IRQ_MAC_1 */
+/* Receive Queue 1 */
+#define	IS_R1_P		(1L<<15)	/* Bit 15:	Parity Error (q1) */
+#define	IS_R1_B		(1L<<14)	/* Bit 14:	End of Buffer (q1) */
+#define	IS_R1_F		(1L<<13)	/* Bit 13:	End of Frame (q1) */
+#define	IS_R1_C		(1L<<12)	/* Bit 12:	Encoding Error (q1) */
+/* Receive Queue 2 */
+#define	IS_R2_P		(1L<<11)	/* Bit 11: (DV)	Parity Error (q2) */
+#define	IS_R2_B		(1L<<10)	/* Bit 10: (DV)	End of Buffer (q2) */
+#define	IS_R2_F		(1L<<9)		/* Bit	9: (DV)	End of Frame (q2) */
+#define	IS_R2_C		(1L<<8)		/* Bit	8: (DV)	Encoding Error (q2) */
+/* Asynchronous Transmit queue */
+					/* Bit  7:	reserved */
+#define	IS_XA_B		(1L<<6)		/* Bit	6:	End of Buffer (xa) */
+#define	IS_XA_F		(1L<<5)		/* Bit	5:	End of Frame (xa) */
+#define	IS_XA_C		(1L<<4)		/* Bit	4:	Encoding Error (xa) */
+/* Synchronous Transmit queue */
+					/* Bit  3:	reserved */
+#define	IS_XS_B		(1L<<2)		/* Bit	2:	End of Buffer (xs) */
+#define	IS_XS_F		(1L<<1)		/* Bit	1:	End of Frame (xs) */
+#define	IS_XS_C		(1L<<0)		/* Bit	0:	Encoding Error (xs) */
+
+/*
+ * Define all valid interrupt source Bits from GET_ISR ()
+ */
+#define	ALL_IRSR	0x01ffff77L	/* (DV) */
+#define	ALL_IRSR_ML	0x0ffff077L	/* (ML) */
+
+
+/*	B0_IMSK		32 bit Interrupt mask register */
+/*
+ * The Bit definnition of this register are the same as of the interrupt
+ * source register. These definition are directly derived from the Hardware
+ * spec.
+ */
+					/* Bit 31..28:	reserved	     */
+#define IRQ_I2C_READY	(1L<<27)	/* Bit 27: (ML)	IRQ on end of I2C tx */
+#define IRQ_SW		(1L<<26)	/* Bit 26: (ML)	SW forced IRQ	     */
+#define IRQ_EXT_REG	(1L<<25)	/* Bit 25: (ML) IRQ from external reg*/
+#define	IRQ_STAT	(1L<<24)	/* Bit 24:	IRQ status exception */
+					/*   PERR, RMABORT, RTABORT DATAPERR */
+#define	IRQ_MST_ERR	(1L<<23)	/* Bit 23:	IRQ master error     */
+					/*   RMABORT, RTABORT, DATAPERR	     */
+#define	IRQ_TIMER	(1L<<22)	/* Bit 22:	IRQ_TIMER	*/
+#define	IRQ_RTM		(1L<<21)	/* Bit 21:	IRQ_RTM		*/
+#define	IRQ_DAS		(1L<<20)	/* Bit 20:	IRQ_PHY_DAS	*/
+#define	IRQ_IFCP_4	(1L<<19)	/* Bit 19:	IRQ_IFCP_4	*/
+#define	IRQ_IFCP_3	(1L<<18)	/* Bit 18:	IRQ_IFCP_3/IRQ_PHY */
+#define	IRQ_IFCP_2	(1L<<17)	/* Bit 17:	IRQ_IFCP_2/IRQ_MAC_2 */
+#define	IRQ_IFCP_1	(1L<<16)	/* Bit 16:	IRQ_IFCP_1/IRQ_MAC_1 */
+/* Receive Queue 1 */
+#define	IRQ_R1_P	(1L<<15)	/* Bit 15:	Parity Error (q1) */
+#define	IRQ_R1_B	(1L<<14)	/* Bit 14:	End of Buffer (q1) */
+#define	IRQ_R1_F	(1L<<13)	/* Bit 13:	End of Frame (q1) */
+#define	IRQ_R1_C	(1L<<12)	/* Bit 12:	Encoding Error (q1) */
+/* Receive Queue 2 */
+#define	IRQ_R2_P	(1L<<11)	/* Bit 11: (DV)	Parity Error (q2) */
+#define	IRQ_R2_B	(1L<<10)	/* Bit 10: (DV)	End of Buffer (q2) */
+#define	IRQ_R2_F	(1L<<9)		/* Bit	9: (DV)	End of Frame (q2) */
+#define	IRQ_R2_C	(1L<<8)		/* Bit	8: (DV)	Encoding Error (q2) */
+/* Asynchronous Transmit queue */
+					/* Bit  7:	reserved */
+#define	IRQ_XA_B	(1L<<6)		/* Bit	6:	End of Buffer (xa) */
+#define	IRQ_XA_F	(1L<<5)		/* Bit	5:	End of Frame (xa) */
+#define	IRQ_XA_C	(1L<<4)		/* Bit	4:	Encoding Error (xa) */
+/* Synchronous Transmit queue */
+					/* Bit  3:	reserved */
+#define	IRQ_XS_B	(1L<<2)		/* Bit	2:	End of Buffer (xs) */
+#define	IRQ_XS_F	(1L<<1)		/* Bit	1:	End of Frame (xs) */
+#define	IRQ_XS_C	(1L<<0)		/* Bit	0:	Encoding Error (xs) */
+
+/* 0x0010 - 0x006b:	formac+ (supernet_3) fequently used registers */
+/*	B0_R1_CSR	32 bit BMU control/status reg (rec q 1 ) */
+/*	B0_R2_CSR	32 bit BMU control/status reg (rec q 2 ) */
+/*	B0_XA_CSR	32 bit BMU control/status reg (a xmit q ) */
+/*	B0_XS_CSR	32 bit BMU control/status reg (s xmit q ) */
+/* The registers are the same as B4_R1_CSR, B4_R2_CSR, B5_Xa_CSR, B5_XS_CSR */
+
+/*	B2_MAC_0	8 bit MAC address Byte 0 */
+/*	B2_MAC_1	8 bit MAC address Byte 1 */
+/*	B2_MAC_2	8 bit MAC address Byte 2 */
+/*	B2_MAC_3	8 bit MAC address Byte 3 */
+/*	B2_MAC_4	8 bit MAC address Byte 4 */
+/*	B2_MAC_5	8 bit MAC address Byte 5 */
+/*	B2_MAC_6	8 bit MAC address Byte 6 (== 0) (DV) */
+/*	B2_MAC_7	8 bit MAC address Byte 7 (== 0) (DV) */
+
+/*	B2_CONN_TYP	8 bit Connector type */
+/*	B2_PMD_TYP	8 bit PMD type */
+/*	Values of connector and PMD type comply to SysKonnect internal std */
+
+/*	The EPROM register are currently of no use */
+/*	B2_E_0		8 bit EPROM Byte 0 */
+/*	B2_E_1		8 bit EPROM Byte 1 */
+/*	B2_E_2		8 bit EPROM Byte 2 */
+/*	B2_E_3		8 bit EPROM Byte 3 */
+
+/*	B2_FAR		32 bit Flash-Prom Address Register/Counter */
+#define	FAR_ADDR	0x1ffffL	/* Bit 16..0:	FPROM Address mask */
+
+/*	B2_FDP		8 bit Flash-Prom Data Port */
+
+/*	B2_LD_CRTL	8 bit loader control */
+/*	Bits are currently reserved */
+
+/*	B2_LD_TEST	8 bit loader test */
+#define	LD_T_ON		(1<<3)	/* Bit 3:    Loader Testmode on */
+#define	LD_T_OFF	(1<<2)	/* Bit 2:    Loader Testmode off */
+#define	LD_T_STEP	(1<<1)	/* Bit 1:    Decrement FPROM addr. Counter */
+#define	LD_START	(1<<0)	/* Bit 0:    Start loading FPROM */
+
+/*	B2_TI_INI	32 bit Timer init value */
+/*	B2_TI_VAL	32 bit Timer value */
+/*	B2_TI_CRTL	8 bit Timer control */
+/*	B2_TI_TEST	8 Bit Timer Test */
+/*	B2_WDOG_INI	32 bit Watchdog init value */
+/*	B2_WDOG_VAL	32 bit Watchdog value */
+/*	B2_WDOG_CRTL	8 bit Watchdog control */
+/*	B2_WDOG_TEST	8 Bit Watchdog Test */
+/*	B2_RTM_INI	32 bit RTM init value */
+/*	B2_RTM_VAL	32 bit RTM value */
+/*	B2_RTM_CRTL	8 bit RTM control */
+/*	B2_RTM_TEST	8 Bit RTM Test */
+/*	B2_<TIM>_CRTL	8 bit <TIM> control */
+/*	B2_IRQ_MOD_INI	32 bit IRQ Moderation Timer Init Reg.	(ML) */
+/*	B2_IRQ_MOD_VAL	32 bit IRQ Moderation Timer Value	(ML) */
+/*	B2_IRQ_MOD_CTRL	8 bit IRQ Moderation Timer Control	(ML) */
+/*	B2_IRQ_MOD_TEST	8 bit IRQ Moderation Timer Test		(ML) */
+#define GET_TOK_CT	(1<<4)	/* Bit 4: Get the Token Counter (RTM) */
+#define TIM_RES_TOK	(1<<3)	/* Bit 3: RTM Status: 1 == restricted */
+#define TIM_ALARM	(1<<3)	/* Bit 3: Timer Alarm (WDOG) */
+#define TIM_START	(1<<2)	/* Bit 2: Start Timer (TI,WDOG,RTM,IRQ_MOD)*/
+#define TIM_STOP	(1<<1)	/* Bit 1: Stop Timer (TI,WDOG,RTM,IRQ_MOD) */
+#define TIM_CL_IRQ	(1<<0)	/* Bit 0: Clear Timer IRQ (TI,WDOG,RTM) */
+/*	B2_<TIM>_TEST	8 Bit <TIM> Test */
+#define	TIM_T_ON	(1<<2)	/* Bit 2: Test mode on (TI,WDOG,RTM,IRQ_MOD) */
+#define	TIM_T_OFF	(1<<1)	/* Bit 1: Test mode off (TI,WDOG,RTM,IRQ_MOD) */
+#define	TIM_T_STEP	(1<<0)	/* Bit 0: Test step (TI,WDOG,RTM,IRQ_MOD) */
+
+/*	B2_TOK_COUNT	0x014c	(ML)	32 bit	Token Counter */
+/*	B2_DESC_ADDR_H	0x0150	(ML)	32 bit	Desciptor Base Addr Reg High */
+/*	B2_CTRL_2	0x0154	(ML)	 8 bit	Control Register 2 */
+				/* Bit 7..5:	reserved		*/
+#define CTRL_CL_I2C_IRQ (1<<4)	/* Bit 4:	Clear I2C IRQ		*/
+#define CTRL_ST_SW_IRQ	(1<<3)	/* Bit 3:	Set IRQ SW Request	*/
+#define CTRL_CL_SW_IRQ	(1<<2)	/* Bit 2:	Clear IRQ SW Request	*/
+#define CTRL_STOP_DONE	(1<<1)	/* Bit 1:	Stop Master is finished */
+#define	CTRL_STOP_MAST	(1<<0)	/* Bit 0:	Command Bit to stop the master*/
+
+/*	B2_IFACE_REG	0x0155	(ML)	 8 bit	Interface Register */
+				/* Bit 7..3:	reserved		*/
+#define	IF_I2C_DATA_DIR	(1<<2)	/* Bit 2:	direction of IF_I2C_DATA*/
+#define IF_I2C_DATA	(1<<1)	/* Bit 1:	I2C Data Port		*/
+#define	IF_I2C_CLK	(1<<0)	/* Bit 0:	I2C Clock Port		*/
+
+				/* 0x0156:		reserved */
+/*	B2_TST_CTRL_2	0x0157	(ML)	 8 bit	Test Control Register 2 */
+					/* Bit 7..4:	reserved */
+					/* force the following error on */
+					/* the next master read/write	*/
+#define TST_FRC_DPERR_MR64	(1<<3)	/* Bit 3:	DataPERR RD 64	*/
+#define TST_FRC_DPERR_MW64	(1<<2)	/* Bit 2:	DataPERR WR 64	*/
+#define TST_FRC_APERR_1M64	(1<<1)	/* Bit 1:	AddrPERR on 1. phase */
+#define TST_FRC_APERR_2M64	(1<<0)	/* Bit 0:	AddrPERR on 2. phase */
+
+/*	B2_I2C_CTRL	0x0158	(ML)	32 bit	I2C Control Register	       */
+#define	I2C_FLAG	(1L<<31)	/* Bit 31:	Start read/write if WR */
+#define I2C_ADDR	(0x7fffL<<16)	/* Bit 30..16:	Addr to be read/written*/
+#define	I2C_DEV_SEL	(0x7fL<<9)	/* Bit  9..15:	I2C Device Select      */
+					/* Bit  5.. 8:	reserved	       */
+#define I2C_BURST_LEN	(1L<<4)		/* Bit  4	Burst Len, 1/4 bytes   */
+#define I2C_DEV_SIZE	(7L<<1)		/* Bit	1.. 3:	I2C Device Size	       */
+#define I2C_025K_DEV	(0L<<1)		/*		0: 256 Bytes or smaller*/
+#define I2C_05K_DEV	(1L<<1)		/* 		1: 512	Bytes	       */
+#define	I2C_1K_DEV	(2L<<1)		/*		2: 1024 Bytes	       */
+#define I2C_2K_DEV	(3L<<1)		/*		3: 2048	Bytes	       */
+#define	I2C_4K_DEV	(4L<<1)		/*		4: 4096 Bytes	       */
+#define	I2C_8K_DEV	(5L<<1)		/*		5: 8192 Bytes	       */
+#define	I2C_16K_DEV	(6L<<1)		/*		6: 16384 Bytes	       */
+#define	I2C_32K_DEV	(7L<<1)		/*		7: 32768 Bytes	       */
+#define I2C_STOP_BIT	(1<<0)		/* Bit  0:	Interrupt I2C transfer */
+
+/*
+ * I2C Addresses
+ *
+ * The temperature sensor and the voltage sensor are on the same I2C bus.
+ * Note: The voltage sensor (Micorwire) will be selected by PCI_EXT_PATCH_1
+ *	 in PCI_OUR_REG 1.
+ */
+#define	I2C_ADDR_TEMP	0x90	/* I2C Address Temperature Sensor */
+
+/*	B2_I2C_DATA	0x015c	(ML)	32 bit	I2C Data Register */
+
+/*	B4_R1_D		4*32 bit current receive Descriptor	(q1) */
+/*	B4_R1_DA	32 bit current rec desc address		(q1) */
+/*	B4_R1_AC	32 bit current receive Address Count	(q1) */
+/*	B4_R1_BC	32 bit current receive Byte Counter	(q1) */
+/*	B4_R1_CSR	32 bit BMU Control/Status Register	(q1) */
+/*	B4_R1_F		32 bit flag register			(q1) */
+/*	B4_R1_T1	32 bit Test Register 1		 	(q1) */
+/*	B4_R1_T2	32 bit Test Register 2		 	(q1) */
+/*	B4_R1_T3	32 bit Test Register 3		 	(q1) */
+/*	B4_R2_D		4*32 bit current receive Descriptor	(q2) */
+/*	B4_R2_DA	32 bit current rec desc address		(q2) */
+/*	B4_R2_AC	32 bit current receive Address Count	(q2) */
+/*	B4_R2_BC	32 bit current receive Byte Counter	(q2) */
+/*	B4_R2_CSR	32 bit BMU Control/Status Register	(q2) */
+/*	B4_R2_F		32 bit flag register			(q2) */
+/*	B4_R2_T1	32 bit Test Register 1			(q2) */
+/*	B4_R2_T2	32 bit Test Register 2			(q2) */
+/*	B4_R2_T3	32 bit Test Register 3			(q2) */
+/*	B5_XA_D		4*32 bit current receive Descriptor	(xa) */
+/*	B5_XA_DA	32 bit current rec desc address		(xa) */
+/*	B5_XA_AC	32 bit current receive Address Count	(xa) */
+/*	B5_XA_BC	32 bit current receive Byte Counter	(xa) */
+/*	B5_XA_CSR	32 bit BMU Control/Status Register	(xa) */
+/*	B5_XA_F		32 bit flag register			(xa) */
+/*	B5_XA_T1	32 bit Test Register 1			(xa) */
+/*	B5_XA_T2	32 bit Test Register 2			(xa) */
+/*	B5_XA_T3	32 bit Test Register 3			(xa) */
+/*	B5_XS_D		4*32 bit current receive Descriptor	(xs) */
+/*	B5_XS_DA	32 bit current rec desc address		(xs) */
+/*	B5_XS_AC	32 bit current receive Address Count	(xs) */
+/*	B5_XS_BC	32 bit current receive Byte Counter	(xs) */
+/*	B5_XS_CSR	32 bit BMU Control/Status Register	(xs) */
+/*	B5_XS_F		32 bit flag register			(xs) */
+/*	B5_XS_T1	32 bit Test Register 1			(xs) */
+/*	B5_XS_T2	32 bit Test Register 2			(xs) */
+/*	B5_XS_T3	32 bit Test Register 3			(xs) */
+/*	B5_<xx>_CSR	32 bit BMU Control/Status Register	(xx) */
+#define	CSR_DESC_CLEAR	(1L<<21)    /* Bit 21:	Clear Reset for Descr */
+#define	CSR_DESC_SET	(1L<<20)    /* Bit 20:	Set Reset for Descr */
+#define	CSR_FIFO_CLEAR	(1L<<19)    /* Bit 19:	Clear Reset for FIFO */
+#define	CSR_FIFO_SET	(1L<<18)    /* Bit 18:	Set Reset for FIFO */
+#define	CSR_HPI_RUN	(1L<<17)    /* Bit 17:	Release HPI SM */
+#define	CSR_HPI_RST	(1L<<16)    /* Bit 16:	Reset HPI SM to Idle */
+#define	CSR_SV_RUN	(1L<<15)    /* Bit 15:	Release Supervisor SM */
+#define	CSR_SV_RST	(1L<<14)    /* Bit 14:	Reset Supervisor SM */
+#define	CSR_DREAD_RUN	(1L<<13)    /* Bit 13:	Release Descr Read SM */
+#define	CSR_DREAD_RST	(1L<<12)    /* Bit 12:	Reset Descr Read SM */
+#define	CSR_DWRITE_RUN	(1L<<11)    /* Bit 11:	Rel. Descr Write SM */
+#define	CSR_DWRITE_RST	(1L<<10)    /* Bit 10:	Reset Descr Write SM */
+#define	CSR_TRANS_RUN	(1L<<9)     /* Bit 9:	Release Transfer SM */
+#define	CSR_TRANS_RST	(1L<<8)     /* Bit 8:	Reset Transfer SM */
+				    /* Bit 7..5: reserved */
+#define	CSR_START	(1L<<4)     /* Bit 4:	Start Rec/Xmit Queue */
+#define	CSR_IRQ_CL_P	(1L<<3)     /* Bit 3:	Clear Parity IRQ, Rcv */
+#define	CSR_IRQ_CL_B	(1L<<2)     /* Bit 2:	Clear EOB IRQ */
+#define	CSR_IRQ_CL_F	(1L<<1)     /* Bit 1:	Clear EOF IRQ */
+#define	CSR_IRQ_CL_C	(1L<<0)     /* Bit 0:	Clear ERR IRQ */
+
+#define CSR_SET_RESET	(CSR_DESC_SET|CSR_FIFO_SET|CSR_HPI_RST|CSR_SV_RST|\
+			CSR_DREAD_RST|CSR_DWRITE_RST|CSR_TRANS_RST)
+#define CSR_CLR_RESET	(CSR_DESC_CLEAR|CSR_FIFO_CLEAR|CSR_HPI_RUN|CSR_SV_RUN|\
+			CSR_DREAD_RUN|CSR_DWRITE_RUN|CSR_TRANS_RUN)
+
+
+/*	B5_<xx>_F	32 bit flag register		 (xx) */
+					/* Bit 28..31:	reserved	      */
+#define F_ALM_FULL	(1L<<27)	/* Bit 27: (ML)	FIFO almost full      */
+#define F_FIFO_EOF	(1L<<26)	/* Bit 26: (ML)	Fag bit in FIFO       */
+#define F_WM_REACHED	(1L<<25)	/* Bit 25: (ML)	Watermark reached     */
+#define F_UP_DW_USED	(1L<<24)	/* Bit 24: (ML) Upper Dword used (bug)*/
+					/* Bit 23: 	reserved	      */
+#define F_FIFO_LEVEL	(0x1fL<<16)	/* Bit 16..22:(ML) # of Qwords in FIFO*/
+					/* Bit  8..15: 	reserved	      */
+#define F_ML_WATER_M	0x0000ffL	/* Bit  0.. 7:(ML) Watermark	      */
+#define	FLAG_WATER	0x00001fL	/* Bit 4..0:(DV) Level of req data tr.*/
+
+/*	B5_<xx>_T1	32 bit Test Register 1		 (xx) */
+/*		Holds four State Machine control Bytes */
+#define	SM_CRTL_SV	(0xffL<<24) /* Bit 31..24:  Control Supervisor SM */
+#define	SM_CRTL_RD	(0xffL<<16) /* Bit 23..16:  Control Read Desc SM */
+#define	SM_CRTL_WR	(0xffL<<8)  /* Bit 15..8:   Control Write Desc SM */
+#define	SM_CRTL_TR	(0xffL<<0)  /* Bit 7..0:    Control Transfer SM */
+
+/*	B4_<xx>_T1_TR	8 bit Test Register 1 TR		(xx) */
+/*	B4_<xx>_T1_WR	8 bit Test Register 1 WR		(xx) */
+/*	B4_<xx>_T1_RD	8 bit Test Register 1 RD		(xx) */
+/*	B4_<xx>_T1_SV	8 bit Test Register 1 SV		(xx) */
+/* The control status byte of each machine looks like ... */
+#define	SM_STATE	0xf0	/* Bit 7..4:	State which shall be loaded */
+#define	SM_LOAD		0x08	/* Bit 3:	Load the SM with SM_STATE */
+#define	SM_TEST_ON	0x04	/* Bit 2:	Switch on SM Test Mode */
+#define	SM_TEST_OFF	0x02	/* Bit 1:	Go off the Test Mode */
+#define	SM_STEP		0x01	/* Bit 0:	Step the State Machine */
+
+/* The coding of the states */
+#define	SM_SV_IDLE	0x0	/* Supervisor	Idle		Tr/Re	     */
+#define	SM_SV_RES_START	0x1	/* Supervisor	Res_Start	Tr/Re	     */
+#define	SM_SV_GET_DESC	0x3	/* Supervisor	Get_Desc	Tr/Re	     */
+#define	SM_SV_CHECK	0x2	/* Supervisor	Check		Tr/Re	     */
+#define	SM_SV_MOV_DATA	0x6	/* Supervisor	Move_Data	Tr/Re	     */
+#define	SM_SV_PUT_DESC	0x7	/* Supervisor	Put_Desc	Tr/Re	     */
+#define	SM_SV_SET_IRQ	0x5	/* Supervisor	Set_Irq		Tr/Re	     */
+
+#define	SM_RD_IDLE	0x0	/* Read Desc.	Idle		Tr/Re	     */
+#define	SM_RD_LOAD	0x1	/* Read Desc.	Load		Tr/Re	     */
+#define	SM_RD_WAIT_TC	0x3	/* Read Desc.	Wait_TC		Tr/Re	     */
+#define	SM_RD_RST_EOF	0x6	/* Read Desc.	Reset_EOF	   Re	     */
+#define	SM_RD_WDONE_R	0x2	/* Read Desc.	Wait_Done	   Re	     */
+#define	SM_RD_WDONE_T	0x4	/* Read Desc.	Wait_Done	Tr   	     */
+
+#define	SM_TR_IDLE	0x0	/* Trans. Data	Idle		Tr/Re	     */
+#define	SM_TR_LOAD	0x3	/* Trans. Data	Load		Tr/Re	     */
+#define	SM_TR_LOAD_R_ML	0x1	/* Trans. Data	Load		  /Re	(ML) */
+#define	SM_TR_WAIT_TC	0x2	/* Trans. Data	Wait_TC		Tr/Re	     */
+#define	SM_TR_WDONE	0x4	/* Trans. Data	Wait_Done	Tr/Re	     */
+
+#define	SM_WR_IDLE	0x0	/* Write Desc.	Idle		Tr/Re	     */
+#define	SM_WR_ABLEN	0x1	/* Write Desc.	Act_Buf_Length	Tr/Re	     */
+#define	SM_WR_LD_A4	0x2	/* Write Desc.	Load_A4		   Re	     */
+#define	SM_WR_RES_OWN	0x2	/* Write Desc.	Res_OWN		Tr   	     */
+#define	SM_WR_WAIT_EOF	0x3	/* Write Desc.	Wait_EOF	   Re	     */
+#define	SM_WR_LD_N2C_R	0x4	/* Write Desc.	Load_N2C	   Re	     */
+#define	SM_WR_WAIT_TC_R	0x5	/* Write Desc.	Wait_TC		   Re	     */
+#define	SM_WR_WAIT_TC4	0x6	/* Write Desc.	Wait_TC4	   Re	     */
+#define	SM_WR_LD_A_T	0x6	/* Write Desc.	Load_A		Tr   	     */
+#define	SM_WR_LD_A_R	0x7	/* Write Desc.	Load_A		   Re	     */
+#define	SM_WR_WAIT_TC_T	0x7	/* Write Desc.	Wait_TC		Tr   	     */
+#define	SM_WR_LD_N2C_T	0xc	/* Write Desc.	Load_N2C	Tr   	     */
+#define	SM_WR_WDONE_T	0x9	/* Write Desc.	Wait_Done	Tr   	     */
+#define	SM_WR_WDONE_R	0xc	/* Write Desc.	Wait_Done	   Re	     */
+#define SM_WR_LD_D_AD	0xe	/* Write Desc.  Load_Dumr_A	   Re	(ML) */
+#define SM_WR_WAIT_D_TC	0xf	/* Write Desc.	Wait_Dumr_TC	   Re	(ML) */
+
+/*	B5_<xx>_T2	32 bit Test Register 2		 (xx) */
+/* Note: This register is only defined for the transmit queues */
+				/* Bit 31..8:	reserved */
+#define	AC_TEST_ON	(1<<7)	/* Bit 7:	Address Counter Test Mode on */
+#define	AC_TEST_OFF	(1<<6)	/* Bit 6:	Address Counter Test Mode off*/
+#define	BC_TEST_ON	(1<<5)	/* Bit 5:	Byte Counter Test Mode on */
+#define	BC_TEST_OFF	(1<<4)	/* Bit 4:	Byte Counter Test Mode off */
+#define	TEST_STEP04	(1<<3)	/* Bit 3:	Inc AC/Dec BC by 4 */
+#define	TEST_STEP03	(1<<2)	/* Bit 2:	Inc AC/Dec BC by 3 */
+#define	TEST_STEP02	(1<<1)	/* Bit 1:	Inc AC/Dec BC by 2 */
+#define	TEST_STEP01	(1<<0)	/* Bit 0:	Inc AC/Dec BC by 1 */
+
+/*	B5_<xx>_T3	32 bit Test Register 3		 (xx) */
+/* Note: This register is only defined for the transmit queues */
+				/* Bit 31..8:	reserved */
+#define T3_MUX_2	(1<<7)	/* Bit 7: (ML)	Mux position MSB */
+#define T3_VRAM_2	(1<<6)	/* Bit 6: (ML)	Virtual RAM buffer addr MSB */
+#define	T3_LOOP		(1<<5)	/* Bit 5: 	Set Loopback (Xmit) */
+#define	T3_UNLOOP	(1<<4)	/* Bit 4: 	Unset Loopback (Xmit) */
+#define	T3_MUX		(3<<2)	/* Bit 3..2:	Mux position */
+#define	T3_VRAM		(3<<0)	/* Bit 1..0:	Virtual RAM buffer Address */
+
+/* PCI card IDs */
+/*
+ * Note: The following 4 byte definitions shall not be used! Use OEM Concept!
+ */
+#define	PCI_VEND_ID0	0x48		/* PCI vendor ID (SysKonnect) */
+#define	PCI_VEND_ID1	0x11		/* PCI vendor ID (SysKonnect) */
+					/*		 (High byte) */
+#define	PCI_DEV_ID0	0x00		/* PCI device ID */
+#define	PCI_DEV_ID1	0x40		/* PCI device ID (High byte) */
+
+/*#define PCI_CLASS	0x02*/		/* PCI class code: network device */
+#define PCI_NW_CLASS	0x02		/* PCI class code: network device */
+#define PCI_SUB_CLASS	0x02		/* PCI subclass ID: FDDI device */
+#define PCI_PROG_INTFC	0x00		/* PCI programming Interface (=0) */
+
+/*
+ * address transmission from logical to physical offset address on board
+ */
+#define	FMA(a)	(0x0400|((a)<<2))	/* FORMAC+ (r/w) (SN3) */
+#define	P1(a)	(0x0380|((a)<<2))	/* PLC1 (r/w) (DAS) */
+#define	P2(a)	(0x0600|((a)<<2))	/* PLC2 (r/w) (covered by the SN3) */
+#define PRA(a)	(B2_MAC_0 + (a))	/* configuration PROM (MAC address) */
+
+/*
+ * FlashProm specification
+ */
+#define	MAX_PAGES	0x20000L	/* Every byte has a single page */
+#define	MAX_FADDR	1		/* 1 byte per page */
+
+/*
+ * Receive / Transmit Buffer Control word
+ */
+#define	BMU_OWN		(1UL<<31)	/* OWN bit: 0 == host, 1 == adapter */
+#define	BMU_STF		(1L<<30)	/* Start of Frame ?		*/
+#define	BMU_EOF		(1L<<29)	/* End of Frame ?		*/
+#define	BMU_EN_IRQ_EOB	(1L<<28)	/* Enable "End of Buffer" IRQ	*/
+#define	BMU_EN_IRQ_EOF	(1L<<27)	/* Enable "End of Frame" IRQ	*/
+#define	BMU_DEV_0	(1L<<26)	/* RX: don't transfer to system mem */
+#define BMU_SMT_TX	(1L<<25)	/* TX: if set, buffer type SMT_MBuf */
+#define BMU_ST_BUF	(1L<<25)	/* RX: copy of start of frame */
+#define BMU_UNUSED	(1L<<24)	/* Set if the Descr is curr unused */
+#define BMU_SW		(3L<<24)	/* 2 Bits reserved for SW usage */
+#define	BMU_CHECK	0x00550000L	/* To identify the control word */
+#define	BMU_BBC		0x0000FFFFL	/* R/T Buffer Byte Count        */
+
+/*
+ * physical address offset + IO-Port base address
+ */
+#ifdef MEM_MAPPED_IO
+#define	ADDR(a)		(char far *) smc->hw.iop+(a)
+#define	ADDRS(smc,a)	(char far *) (smc)->hw.iop+(a)
+#else
+#define	ADDR(a)	(((a)>>7) ? (outp(smc->hw.iop+B0_RAP,(a)>>7), \
+	(smc->hw.iop+(((a)&0x7F)|((a)>>7 ? 0x80:0)))) : \
+	(smc->hw.iop+(((a)&0x7F)|((a)>>7 ? 0x80:0))))
+#define	ADDRS(smc,a) (((a)>>7) ? (outp((smc)->hw.iop+B0_RAP,(a)>>7), \
+	((smc)->hw.iop+(((a)&0x7F)|((a)>>7 ? 0x80:0)))) : \
+	((smc)->hw.iop+(((a)&0x7F)|((a)>>7 ? 0x80:0))))
+#endif
+
+/*
+ * Define a macro to access the configuration space
+ */
+#define PCI_C(a)	ADDR(B3_CFG_SPC + (a))	/* PCI Config Space */
+
+#define EXT_R(a)	ADDR(B6_EXT_REG + (a))	/* External Registers */
+
+/*
+ * Define some values needed for the MAC address (PROM)
+ */
+#define	SA_MAC		(0)	/* start addr. MAC_AD within the PROM */
+#define	PRA_OFF		(0)	/* offset correction when 4th byte reading */
+
+#define	SKFDDI_PSZ	8	/* address PROM size */
+
+#define	FM_A(a)	ADDR(FMA(a))	/* FORMAC Plus physical addr */
+#define	P1_A(a)	ADDR(P1(a))	/* PLC1 (r/w) */
+#define	P2_A(a)	ADDR(P2(a))	/* PLC2 (r/w) (DAS) */
+#define PR_A(a)	ADDR(PRA(a))	/* config. PROM (MAC address) */
+
+/*
+ * Macro to read the PROM
+ */
+#define	READ_PROM(a)	((u_char)inp(a))
+
+#define	GET_PAGE(bank)	outpd(ADDR(B2_FAR),bank)
+#define	VPP_ON()
+#define	VPP_OFF()
+
+/*
+ * Note: Values of the Interrupt Source Register are defined above
+ */
+#define ISR_A		ADDR(B0_ISRC)
+#define	GET_ISR()		inpd(ISR_A)
+#define GET_ISR_SMP(iop)	inpd((iop)+B0_ISRC)
+#define	CHECK_ISR()		(inpd(ISR_A) & inpd(ADDR(B0_IMSK)))
+#define CHECK_ISR_SMP(iop)	(inpd((iop)+B0_ISRC) & inpd((iop)+B0_IMSK))
+
+#define	BUS_CHECK()
+
+/*
+ * CLI_FBI:	Disable Board Interrupts
+ * STI_FBI:	Enable Board Interrupts
+ */
+#ifndef UNIX
+#define	CLI_FBI()	outpd(ADDR(B0_IMSK),0)
+#else
+#define	CLI_FBI(smc)	outpd(ADDRS((smc),B0_IMSK),0)
+#endif
+
+#ifndef UNIX
+#define	STI_FBI()	outpd(ADDR(B0_IMSK),smc->hw.is_imask)
+#else
+#define	STI_FBI(smc)	outpd(ADDRS((smc),B0_IMSK),(smc)->hw.is_imask)
+#endif
+
+#define CLI_FBI_SMP(iop)	outpd((iop)+B0_IMSK,0)
+#define	STI_FBI_SMP(smc,iop)	outpd((iop)+B0_IMSK,(smc)->hw.is_imask)
+
+#endif	/* PCI */
+/*--------------------------------------------------------------------------*/
+
+/*
+ * 12 bit transfer (dword) counter:
+ *	(ISA:	2*trc = number of byte)
+ *	(EISA:	4*trc = number of byte)
+ *	(MCA:	4*trc = number of byte)
+ */
+#define	MAX_TRANS	(0x0fff)
+
+/*
+ * PC PIC
+ */
+#define	MST_8259 (0x20)
+#define	SLV_8259 (0xA0)
+
+#define TPS		(18)		/* ticks per second */
+
+/*
+ * error timer defs
+ */
+#define	TN		(4)	/* number of supported timer = TN+1 */
+#define	SNPPND_TIME	(5)	/* buffer memory access over mem. data reg. */
+
+#define	MAC_AD	0x405a0000
+
+#define MODR1	FM_A(FM_MDREG1)	/* mode register 1 */
+#define MODR2	FM_A(FM_MDREG2)	/* mode register 2 */
+
+#define CMDR1	FM_A(FM_CMDREG1)	/* command register 1 */
+#define CMDR2	FM_A(FM_CMDREG2)	/* command register 2 */
+
+
+/*
+ * function defines
+ */
+#define	CLEAR(io,mask)		outpw((io),inpw(io)&(~(mask)))
+#define	SET(io,mask)		outpw((io),inpw(io)|(mask))
+#define	GET(io,mask)		(inpw(io)&(mask))
+#define	SETMASK(io,val,mask)	outpw((io),(inpw(io) & ~(mask)) | (val))
+
+/*
+ * PHY Port A (PA) = PLC 1
+ * With SuperNet 3 PHY-A and PHY S are identical.
+ */
+#define	PLC(np,reg)	(((np) == PA) ? P2_A(reg) : P1_A(reg))
+
+/*
+ * set memory address register for write and read
+ */
+#define	MARW(ma)	outpw(FM_A(FM_MARW),(unsigned int)(ma))
+#define	MARR(ma)	outpw(FM_A(FM_MARR),(unsigned int)(ma))
+
+/*
+ * read/write from/to memory data register
+ */
+/* write double word */
+#define	MDRW(dd)	outpw(FM_A(FM_MDRU),(unsigned int)((dd)>>16)) ;\
+			outpw(FM_A(FM_MDRL),(unsigned int)(dd))
+
+#ifndef WINNT
+/* read double word */
+#define	MDRR()		(((long)inpw(FM_A(FM_MDRU))<<16) + inpw(FM_A(FM_MDRL)))
+
+/* read FORMAC+ 32-bit status register */
+#define	GET_ST1()	(((long)inpw(FM_A(FM_ST1U))<<16) + inpw(FM_A(FM_ST1L)))
+#define	GET_ST2()	(((long)inpw(FM_A(FM_ST2U))<<16) + inpw(FM_A(FM_ST2L)))
+#ifdef	SUPERNET_3
+#define	GET_ST3()	(((long)inpw(FM_A(FM_ST3U))<<16) + inpw(FM_A(FM_ST3L)))
+#endif
+#else
+/* read double word */
+#define MDRR()		inp2w((FM_A(FM_MDRU)),(FM_A(FM_MDRL)))
+
+/* read FORMAC+ 32-bit status register */
+#define GET_ST1()	inp2w((FM_A(FM_ST1U)),(FM_A(FM_ST1L)))
+#define GET_ST2()	inp2w((FM_A(FM_ST2U)),(FM_A(FM_ST2L)))
+#ifdef	SUPERNET_3
+#define GET_ST3()	inp2w((FM_A(FM_ST3U)),(FM_A(FM_ST3L)))
+#endif
+#endif
+
+/* Special timer macro for 82c54 */
+				/* timer access over data bus bit 8..15 */
+#define	OUT_82c54_TIMER(port,val)	outpw(TI_A(port),(val)<<8)
+#define	IN_82c54_TIMER(port)		((inpw(TI_A(port))>>8) & 0xff)
+
+
+#ifdef	DEBUG
+#define	DB_MAC(mac,st) {if (debug_mac & 0x1)\
+				printf("M") ;\
+			if (debug_mac & 0x2)\
+				printf("\tMAC %d status 0x%08lx\n",mac,st) ;\
+			if (debug_mac & 0x4)\
+				dp_mac(mac,st) ;\
+}
+
+#define	DB_PLC(p,iev) {	if (debug_plc & 0x1)\
+				printf("P") ;\
+			if (debug_plc & 0x2)\
+				printf("\tPLC %s Int 0x%04x\n", \
+					(p == PA) ? "A" : "B", iev) ;\
+			if (debug_plc & 0x4)\
+				dp_plc(p,iev) ;\
+}
+
+#define	DB_TIMER() {	if (debug_timer & 0x1)\
+				printf("T") ;\
+			if (debug_timer & 0x2)\
+				printf("\tTimer ISR\n") ;\
+}
+
+#else	/* no DEBUG */
+
+#define	DB_MAC(mac,st)
+#define	DB_PLC(p,iev)
+#define	DB_TIMER()
+
+#endif	/* no DEBUG */
+
+#define	INC_PTR(sp,cp,ep)	if (++cp == ep) cp = sp
+/*
+ * timer defs
+ */
+#define	COUNT(t)	((t)<<6)	/* counter */
+#define	RW_OP(o)	((o)<<4)	/* read/write operation */
+#define	TMODE(m)	((m)<<1)	/* timer mode */
+
+#endif
diff --git a/drivers/net/fddi/skfp/h/skfbiinc.h b/drivers/net/fddi/skfp/h/skfbiinc.h
new file mode 100644
index 0000000..ac2d719
--- /dev/null
+++ b/drivers/net/fddi/skfp/h/skfbiinc.h
@@ -0,0 +1,97 @@
+/******************************************************************************
+ *
+ *	(C)Copyright 1998,1999 SysKonnect,
+ *	a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+#ifndef	_SKFBIINC_
+#define _SKFBIINC_
+
+#include "h/supern_2.h"
+
+/*
+ * special defines for use into .asm files
+ */
+#define ERR_FLAGS (FS_MSRABT | FS_SEAC2 | FS_SFRMERR | FS_SFRMTY1)
+
+#ifdef PCI
+#define	IMASK_FAST	(IS_PLINT1 | IS_PLINT2 | IS_TIMINT | IS_TOKEN | \
+			 IS_MINTR2 | IS_MINTR3 | IS_R1_P | \
+			 IS_R1_C | IS_XA_C | IS_XS_C)
+#endif
+
+#ifdef	PCI
+#define	ISR_MASK	(IS_MINTR1 | IS_R1_F | IS_XS_F| IS_XA_F | IMASK_FAST)
+#else
+#define	ISR_MASK	(IS_MINTR1 | IS_MINTR2 | IMASK_FAST)
+#endif
+
+#define	FMA_FM_CMDREG1	FMA(FM_CMDREG1)
+#define	FMA_FM_CMDREG2	FMA(FM_CMDREG2)
+#define	FMA_FM_STMCHN	FMA(FM_STMCHN)
+#define	FMA_FM_RPR	FMA(FM_RPR)
+#define	FMA_FM_WPXA0	FMA(FM_WPXA0)
+#define	FMA_FM_WPXA2	FMA(FM_WPXA2)
+#define	FMA_FM_MARR	FMA(FM_MARR)
+#define	FMA_FM_MARW	FMA(FM_MARW)
+#define	FMA_FM_MDRU	FMA(FM_MDRU)
+#define	FMA_FM_MDRL	FMA(FM_MDRL)
+#define	FMA_ST1L	FMA(FM_ST1L)
+#define	FMA_ST1U	FMA(FM_ST1U)
+#define	FMA_ST2L	FMA(FM_ST2L)
+#define	FMA_ST2U	FMA(FM_ST2U)
+#ifdef	SUPERNET_3
+#define FMA_ST3L	FMA(FM_ST3L)
+#define FMA_ST3U	FMA(FM_ST3U)
+#endif
+
+#define TMODE_RRQ	RQ_RRQ
+#define TMODE_WAQ2	RQ_WA2
+#define	HSRA		HSR(0)
+
+
+#define FMA_FM_ST1L	FMA_ST1L
+#define FMA_FM_ST1U	FMA_ST1U
+#define FMA_FM_ST2L	FMA_ST2L
+#define FMA_FM_ST2U	FMA_ST2U
+#ifdef	SUPERNET_3
+#define FMA_FM_ST3L	FMA_ST3L
+#define FMA_FM_ST3U	FMA_ST3U
+#endif
+
+#define FMA_FM_SWPR	FMA(FM_SWPR)
+
+#define FMA_FM_RPXA0	FMA(FM_RPXA0)
+
+#define	FMA_FM_RPXS	FMA(FM_RPXS)
+#define	FMA_FM_WPXS	FMA(FM_WPXS)
+
+#define	FMA_FM_IMSK1U	FMA(FM_IMSK1U)
+#define	FMA_FM_IMSK1L	FMA(FM_IMSK1L)
+
+#define	FMA_FM_EAS	FMA(FM_EAS)
+#define	FMA_FM_EAA0	FMA(FM_EAA0)
+
+#define	TMODE_WAQ0	RQ_WA0
+#define TMODE_WSQ	RQ_WSQ
+
+/* Define default for DRV_PCM_STATE_CHANGE */
+#ifndef	DRV_PCM_STATE_CHANGE
+#define	DRV_PCM_STATE_CHANGE(smc,plc,p_state)	/* nothing */
+#endif
+
+/* Define default for DRV_RMT_INDICATION */
+#ifndef	DRV_RMT_INDICATION
+#define	DRV_RMT_INDICATION(smc,i)	/* nothing */
+#endif
+
+#endif	/* n_SKFBIINC_ */
+
diff --git a/drivers/net/fddi/skfp/h/smc.h b/drivers/net/fddi/skfp/h/smc.h
new file mode 100644
index 0000000..c774a95
--- /dev/null
+++ b/drivers/net/fddi/skfp/h/smc.h
@@ -0,0 +1,488 @@
+/******************************************************************************
+ *
+ *	(C)Copyright 1998,1999 SysKonnect,
+ *	a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+#ifndef	_SCMECM_
+#define _SCMECM_
+
+#if	defined(PCI) && !defined(OSDEF)
+/*
+ * In the case of the PCI bus the file osdef1st.h must be present
+ */
+#define	OSDEF
+#endif
+
+#ifdef	PCI
+#ifndef	SUPERNET_3
+#define	SUPERNET_3
+#endif
+#ifndef	TAG_MODE
+#define	TAG_MODE
+#endif
+#endif
+
+/*
+ * include all other files in required order
+ * the following files must have been included before:
+ *	types.h
+ *	fddi.h
+ */
+#ifdef	OSDEF
+#include "h/osdef1st.h"
+#endif	/* OSDEF */
+#ifdef	OEM_CONCEPT
+#include "oemdef.h"
+#endif	/* OEM_CONCEPT */
+#include "h/smt.h"
+#include "h/cmtdef.h"
+#include "h/fddimib.h"
+#include "h/targethw.h"		/* all target hw dependencies */
+#include "h/targetos.h"		/* all target os dependencies */
+#ifdef	ESS
+#include "h/sba.h"
+#endif
+
+/*
+ * Event Queue
+ *	queue.c
+ * events are class/value pairs
+ *	class	is addressee, e.g. RMT, PCM etc.
+ *	value	is command, e.g. line state change, ring op change etc.
+ */
+struct event_queue {
+	u_short	class ;			/* event class */
+	u_short	event ;			/* event value */
+} ;
+
+/*
+ * define event queue as circular buffer
+ */
+#ifdef	CONCENTRATOR
+#define MAX_EVENT	128
+#else	/* nCONCENTRATOR */
+#define MAX_EVENT	64
+#endif	/* nCONCENTRATOR */
+
+struct s_queue {
+
+	struct event_queue ev_queue[MAX_EVENT];
+	struct event_queue *ev_put ;
+	struct event_queue *ev_get ;
+} ;
+
+/*
+ * ECM - Entity Coordination Management
+ * ecm.c
+ */
+struct s_ecm {
+	u_char path_test ;		/* ECM path test variable */
+	u_char sb_flag ;		/* ECM stuck bypass */
+	u_char DisconnectFlag ;		/* jd 05-Aug-1999 Bug #10419 
+					 * ECM disconnected */
+	u_char ecm_line_state ;		/* flag to dispatcher : line states */
+	u_long trace_prop ;		/* ECM Trace_Prop flag >= 16 bits !! */
+	/* NUMPHYS note:
+	 * this variable must have enough bits to hold all entiies in
+	 * the station. So NUMPHYS may not be greater than 31.
+	 */
+	char	ec_pad[2] ;
+	struct smt_timer ecm_timer ;	/* timer */
+} ;
+
+
+/*
+ * RMT - Ring Management
+ * rmt.c
+ */
+struct s_rmt {
+	u_char dup_addr_test ;		/* state of dupl. addr. test */
+	u_char da_flag ;		/* flag : duplicate address det. */
+	u_char loop_avail ;		/* flag : MAC available for loopback */
+	u_char sm_ma_avail ;		/* flag : MAC available for SMT */
+	u_char no_flag ;		/* flag : ring not operational */
+	u_char bn_flag ;		/* flag : MAC reached beacon state */
+	u_char jm_flag ;		/* flag : jamming in NON_OP_DUP */
+	u_char rm_join ;		/* CFM flag RM_Join */
+	u_char rm_loop ;		/* CFM flag RM_Loop */
+
+	long fast_rm_join ;		/* bit mask of active ports */
+	/*
+	 * timer and flags
+	 */
+	struct smt_timer rmt_timer0 ;	/* timer 0 */
+	struct smt_timer rmt_timer1 ;	/* timer 1 */
+	struct smt_timer rmt_timer2 ;	/* timer 2 */
+	u_char timer0_exp ;		/* flag : timer 0 expired */
+	u_char timer1_exp ;		/* flag : timer 1 expired */
+	u_char timer2_exp ;		/* flag : timer 2 expired */
+
+	u_char rm_pad1[1] ;
+} ;
+
+/*
+ * CFM - Configuration Management
+ * cfm.c
+ * used for SAS and DAS
+ */
+struct s_cfm {
+	u_char cf_state;		/* CFM state machine current state */
+	u_char cf_pad[3] ;
+} ;
+
+/*
+ * CEM - Configuration Element Management
+ * cem.c
+ * used for Concentrator
+ */
+#ifdef	CONCENTRATOR
+struct s_cem {
+	int	ce_state ;	/* CEM state */
+	int	ce_port ;	/* PA PB PM PM+1 .. */
+	int	ce_type ;	/* TA TB TS TM */
+} ;
+
+/*
+ * linked list of CCEs in current token path
+ */
+struct s_c_ring {
+	struct s_c_ring	*c_next ;
+	char		c_entity ;
+} ;
+
+struct mib_path_config {
+	u_long	fddimibPATHConfigSMTIndex;
+	u_long	fddimibPATHConfigPATHIndex;
+	u_long	fddimibPATHConfigTokenOrder;
+	u_long	fddimibPATHConfigResourceType;
+#define SNMP_RES_TYPE_MAC	2	/* Resource is a MAC */
+#define SNMP_RES_TYPE_PORT	4	/* Resource is a PORT */
+	u_long	fddimibPATHConfigResourceIndex;
+	u_long	fddimibPATHConfigCurrentPath;
+#define SNMP_PATH_ISOLATED	1	/* Current path is isolated */
+#define SNMP_PATH_LOCAL		2	/* Current path is local */
+#define SNMP_PATH_SECONDARY	3	/* Current path is secondary */
+#define SNMP_PATH_PRIMARY	4	/* Current path is primary */
+#define SNMP_PATH_CONCATENATED	5	/* Current path is concatenated */
+#define SNMP_PATH_THRU		6	/* Current path is thru */
+};
+
+
+#endif
+
+/*
+ * PCM connect states
+ */
+#define PCM_DISABLED	0
+#define PCM_CONNECTING	1
+#define PCM_STANDBY	2
+#define PCM_ACTIVE	3
+
+struct s_pcm {
+	u_char	pcm_pad[3] ;
+} ;
+
+/*
+ * PHY struct
+ * one per physical port
+ */
+struct s_phy {
+	/* Inter Module Globals */
+	struct fddi_mib_p	*mib ;
+
+	u_char np ;		/* index 0 .. NUMPHYS */
+	u_char cf_join ;
+	u_char cf_loop ;
+	u_char wc_flag ;	/* withhold connection flag */
+	u_char pc_mode ;	/* Holds the negotiated mode of the PCM */
+	u_char pc_lem_fail ;	/* flag : LCT failed */
+	u_char lc_test ;
+	u_char scrub ;		/* CFM flag Scrub -> PCM */
+	char phy_name ;
+	u_char pmd_type[2] ;	/* SK connector/transceiver type codes */
+#define PMD_SK_CONN	0	/* pmd_type[PMD_SK_CONN] = Connector */
+#define PMD_SK_PMD	1	/* pmd_type[PMD_SK_PMD] = Xver */
+	u_char pmd_scramble ;	/* scrambler on/off */
+
+	/* inner Module Globals */
+	u_char curr_ls ;	/* current line state */
+	u_char ls_flag ;
+	u_char rc_flag ;
+	u_char tc_flag ;
+	u_char td_flag ;
+	u_char bitn ;
+	u_char tr_flag ;	/* trace recvd while in active */
+	u_char twisted ;	/* flag to indicate an A-A or B-B connection */
+	u_char t_val[NUMBITS] ;	/* transmit bits for signaling */
+	u_char r_val[NUMBITS] ;	/* receive bits for signaling */
+	u_long t_next[NUMBITS] ;
+	struct smt_timer pcm_timer0 ;
+	struct smt_timer pcm_timer1 ;
+	struct smt_timer pcm_timer2 ;
+	u_char timer0_exp ;
+	u_char timer1_exp ;
+	u_char timer2_exp ;
+	u_char pcm_pad1[1] ;
+	int	cem_pst ;	/* CEM privae state; used for dual homing */
+	struct lem_counter lem ;
+#ifdef	AMDPLC
+	struct s_plc	plc ;
+#endif
+} ;
+
+/*
+ * timer package
+ * smttimer.c
+ */
+struct s_timer {
+	struct smt_timer	*st_queue ;
+	struct smt_timer	st_fast ;
+} ;
+
+/*
+ * SRF types and data
+ */
+#define SMT_EVENT_BASE			1
+#define SMT_EVENT_MAC_PATH_CHANGE	(SMT_EVENT_BASE+0)
+#define SMT_EVENT_MAC_NEIGHBOR_CHANGE	(SMT_EVENT_BASE+1)
+#define SMT_EVENT_PORT_PATH_CHANGE	(SMT_EVENT_BASE+2)
+#define SMT_EVENT_PORT_CONNECTION	(SMT_EVENT_BASE+3)
+
+#define SMT_IS_CONDITION(x)			((x)>=SMT_COND_BASE)
+
+#define SMT_COND_BASE		(SMT_EVENT_PORT_CONNECTION+1)
+#define SMT_COND_SMT_PEER_WRAP		(SMT_COND_BASE+0)
+#define SMT_COND_SMT_HOLD		(SMT_COND_BASE+1)
+#define SMT_COND_MAC_FRAME_ERROR	(SMT_COND_BASE+2)
+#define SMT_COND_MAC_DUP_ADDR		(SMT_COND_BASE+3)
+#define SMT_COND_MAC_NOT_COPIED		(SMT_COND_BASE+4)
+#define SMT_COND_PORT_EB_ERROR		(SMT_COND_BASE+5)
+#define SMT_COND_PORT_LER		(SMT_COND_BASE+6)
+
+#define SR0_WAIT	0
+#define SR1_HOLDOFF	1
+#define SR2_DISABLED	2
+
+struct s_srf {
+	u_long	SRThreshold ;			/* threshold value */
+	u_char	RT_Flag ;			/* report transmitted flag */
+	u_char	sr_state ;			/* state-machine */
+	u_char	any_report ;			/* any report required */
+	u_long	TSR ;				/* timer */
+	u_short	ring_status ;			/* IBM ring status */
+} ;
+
+/*
+ * IBM token ring status
+ */
+#define RS_RES15	(1<<15)			/* reserved */
+#define RS_HARDERROR	(1<<14)			/* ring down */
+#define RS_SOFTERROR	(1<<13)			/* sent SRF */
+#define RS_BEACON	(1<<12)			/* transmitted beacon */
+#define RS_PATHTEST	(1<<11)			/* path test failed */
+#define RS_SELFTEST	(1<<10)			/* selftest required */
+#define RS_RES9		(1<< 9)			/* reserved */
+#define RS_DISCONNECT	(1<< 8)			/* remote disconnect */
+#define RS_RES7		(1<< 7)			/* reserved */
+#define RS_DUPADDR	(1<< 6)			/* duplicate address */
+#define RS_NORINGOP	(1<< 5)			/* no ring op */
+#define RS_VERSION	(1<< 4)			/* SMT version mismatch */
+#define RS_STUCKBYPASSS	(1<< 3)			/* stuck bypass */
+#define RS_EVENT	(1<< 2)			/* FDDI event occurred */
+#define RS_RINGOPCHANGE	(1<< 1)			/* ring op changed */
+#define RS_RES0		(1<< 0)			/* reserved */
+
+#define RS_SET(smc,bit) \
+	ring_status_indication(smc,smc->srf.ring_status |= bit)
+#define RS_CLEAR(smc,bit)	\
+	ring_status_indication(smc,smc->srf.ring_status &= ~bit)
+
+#define RS_CLEAR_EVENT	(0xffff & ~(RS_NORINGOP))
+
+/* Define the AIX-event-Notification as null function if it isn't defined */
+/* in the targetos.h file */
+#ifndef AIX_EVENT
+#define AIX_EVENT(smc,opt0,opt1,opt2,opt3)	/* nothing */
+#endif
+
+struct s_srf_evc {
+	u_char	evc_code ;			/* event code type */
+	u_char	evc_index ;			/* index for mult. instances */
+	u_char	evc_rep_required ;		/* report required */
+	u_short	evc_para ;			/* SMT Para Number */
+	u_char	*evc_cond_state ;		/* condition state */
+	u_char	*evc_multiple ;			/* multiple occurrence */
+} ;
+
+/*
+ * Values used by frame based services
+ * smt.c
+ */
+#define SMT_MAX_TEST		5
+#define SMT_TID_NIF		0		/* pending NIF request */
+#define SMT_TID_NIF_TEST	1		/* pending NIF test */
+#define SMT_TID_ECF_UNA		2		/* pending ECF UNA test */
+#define SMT_TID_ECF_DNA		3		/* pending ECF DNA test */
+#define SMT_TID_ECF		4		/* pending ECF test */
+
+struct smt_values {
+	u_long		smt_tvu ;		/* timer valid una */
+	u_long		smt_tvd ;		/* timer valid dna */
+	u_long		smt_tid ;		/* transaction id */
+	u_long		pend[SMT_MAX_TEST] ;	/* TID of requests */
+	u_long		uniq_time ;		/* unique time stamp */
+	u_short		uniq_ticks  ;		/* unique time stamp */
+	u_short		please_reconnect ;	/* flag : reconnect */
+	u_long		smt_last_lem ;
+	u_long		smt_last_notify ;
+	struct smt_timer	smt_timer ;	/* SMT NIF timer */
+	u_long		last_tok_time[NUMMACS];	/* token cnt emulation */
+} ;
+
+/*
+ * SMT/CMT configurable parameters
+ */
+#define SMT_DAS	0			/* dual attach */
+#define SMT_SAS	1			/* single attach */
+#define SMT_NAC	2			/* null attach concentrator */
+
+struct smt_config {
+	u_char	attach_s ;		/* CFM attach to secondary path */
+	u_char	sas ;			/* SMT_DAS/SAS/NAC */
+	u_char	build_ring_map ;	/* build ringmap if TRUE */
+	u_char	numphys ;		/* number of active phys */
+	u_char	sc_pad[1] ;
+
+	u_long	pcm_tb_min ;		/* PCM : TB_Min timer value */
+	u_long	pcm_tb_max ;		/* PCM : TB_Max timer value */
+	u_long	pcm_c_min ;		/* PCM : C_Min timer value */
+	u_long	pcm_t_out ;		/* PCM : T_Out timer value */
+	u_long	pcm_tl_min ;		/* PCM : TL_min timer value */
+	u_long	pcm_lc_short ;		/* PCM : LC_Short timer value */
+	u_long	pcm_lc_medium ;		/* PCM : LC_Medium timer value */
+	u_long	pcm_lc_long ;		/* PCM : LC_Long timer value */
+	u_long	pcm_lc_extended ;	/* PCM : LC_Extended timer value */
+	u_long	pcm_t_next_9 ;		/* PCM : T_Next[9] timer value */
+	u_long	pcm_ns_max ;		/* PCM : NS_Max timer value */
+
+	u_long	ecm_i_max ;		/* ECM : I_Max timer value */
+	u_long	ecm_in_max ;		/* ECM : IN_Max timer value */
+	u_long	ecm_td_min ;		/* ECM : TD_Min timer */
+	u_long	ecm_test_done ;		/* ECM : path test done timer */
+	u_long	ecm_check_poll ;	/* ECM : check bypass poller */
+
+	u_long	rmt_t_non_op ;		/* RMT : T_Non_OP timer value */
+	u_long	rmt_t_stuck ;		/* RMT : T_Stuck timer value */
+	u_long	rmt_t_direct ;		/* RMT : T_Direct timer value */
+	u_long	rmt_t_jam ;		/* RMT : T_Jam timer value */
+	u_long	rmt_t_announce ;	/* RMT : T_Announce timer value */
+	u_long	rmt_t_poll ;		/* RMT : claim/beacon poller */
+	u_long  rmt_dup_mac_behavior ;  /* Flag for the beavior of SMT if
+					 * a Duplicate MAC Address was detected.
+					 * FALSE: SMT will leave finally the ring
+					 * TRUE:  SMT will reinstert into the ring
+					 */
+	u_long	mac_d_max ;		/* MAC : D_Max timer value */
+
+	u_long lct_short ;		/* LCT : error threshold */
+	u_long lct_medium ;		/* LCT : error threshold */
+	u_long lct_long ;		/* LCT : error threshold */
+	u_long lct_extended ;		/* LCT : error threshold */
+} ;
+
+#ifdef	DEBUG
+/*
+ * Debugging struct sometimes used in smc
+ */
+struct	smt_debug {
+	int	d_smtf ;
+	int	d_smt ;
+	int	d_ecm ;
+	int	d_rmt ;
+	int	d_cfm ;
+	int	d_pcm ;
+	int	d_plc ;
+#ifdef	ESS
+	int	d_ess ;
+#endif
+#ifdef	SBA
+	int	d_sba ;
+#endif
+	struct	os_debug	d_os;	/* Include specific OS DEBUG struct */
+} ;
+
+#ifndef	DEBUG_BRD
+/* all boards shall be debugged with one debug struct */
+extern	struct	smt_debug	debug;	/* Declaration of debug struct */
+#endif	/* DEBUG_BRD */
+
+#endif	/* DEBUG */
+
+/*
+ * the SMT Context Struct SMC
+ * this struct contains ALL global variables of SMT
+ */
+struct s_smc {
+	struct s_smt_os	os ;		/* os specific */
+	struct s_smt_hw	hw ;		/* hardware */
+
+/*
+ * NOTE: os and hw MUST BE the first two structs
+ * anything beyond hw WILL BE SET TO ZERO in smt_set_defaults()
+ */
+	struct smt_config s ;		/* smt constants */
+	struct smt_values sm ;		/* smt variables */
+	struct s_ecm	e ;		/* ecm */
+	struct s_rmt	r ;		/* rmt */
+	struct s_cfm	cf ;		/* cfm/cem */
+#ifdef	CONCENTRATOR
+	struct s_cem	ce[NUMPHYS] ;	/* cem */
+	struct s_c_ring	cr[NUMPHYS+NUMMACS] ;
+#endif
+	struct s_pcm	p ;		/* pcm */
+	struct s_phy	y[NUMPHYS] ;	/* phy */
+	struct s_queue	q ;		/* queue */
+	struct s_timer	t ;		/* timer */
+	struct s_srf srf ;		/* SRF */
+	struct s_srf_evc evcs[6+NUMPHYS*4] ;
+	struct fddi_mib	mib ;		/* __THE_MIB__ */
+#ifdef	SBA
+	struct s_sba	sba ;		/* SBA variables */
+#endif
+#ifdef	ESS
+	struct s_ess	ess ;		/* Ess variables */
+#endif
+#if	defined(DEBUG) && defined(DEBUG_BRD)
+	/* If you want all single board to be debugged separately */
+	struct smt_debug	debug;	/* Declaration of debug struct */
+#endif	/* DEBUG_BRD && DEBUG */
+} ;
+
+extern const struct fddi_addr fddi_broadcast;
+
+extern void all_selection_criteria(struct s_smc *smc);
+extern void card_stop(struct s_smc *smc);
+extern void init_board(struct s_smc *smc, u_char *mac_addr);
+extern int init_fplus(struct s_smc *smc);
+extern void init_plc(struct s_smc *smc);
+extern int init_smt(struct s_smc *smc, u_char * mac_addr);
+extern void mac1_irq(struct s_smc *smc, u_short stu, u_short stl);
+extern void mac2_irq(struct s_smc *smc, u_short code_s2u, u_short code_s2l);
+extern void mac3_irq(struct s_smc *smc, u_short code_s3u, u_short code_s3l);
+extern int pcm_status_twisted(struct s_smc *smc);
+extern void plc1_irq(struct s_smc *smc);
+extern void plc2_irq(struct s_smc *smc);
+extern void read_address(struct s_smc *smc, u_char * mac_addr);
+extern void timer_irq(struct s_smc *smc);
+
+#endif	/* _SCMECM_ */
+
diff --git a/drivers/net/fddi/skfp/h/smt.h b/drivers/net/fddi/skfp/h/smt.h
new file mode 100644
index 0000000..2030f9c
--- /dev/null
+++ b/drivers/net/fddi/skfp/h/smt.h
@@ -0,0 +1,882 @@
+/******************************************************************************
+ *
+ *	(C)Copyright 1998,1999 SysKonnect,
+ *	a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+ *	SMT 7.2 frame definitions
+ */
+
+#ifndef	_SMT_
+#define _SMT_
+
+/* #define SMT5_10 */
+#define SMT6_10
+#define SMT7_20
+
+#define	OPT_PMF		/* if parameter management is supported */
+#define	OPT_SRF		/* if status report is supported */
+
+/*
+ * SMT frame version 5.1
+ */
+
+#define SMT_VID	0x0001			/* V 5.1 .. 6.1 */
+#define SMT_VID_2 0x0002		/* V 7.2 */
+
+struct smt_sid {
+	u_char	sid_oem[2] ;			/* implementation spec. */
+	struct fddi_addr sid_node ;		/* node address */
+} ;
+
+typedef u_char	t_station_id[8] ;
+
+/*
+ * note on alignment :
+ * sizeof(struct smt_header) = 32
+ * all parameters are long aligned
+ * if struct smt_header starts at offset 0, all longs are aligned correctly
+ * (FC starts at offset 3)
+ */
+_packed struct smt_header {
+	struct fddi_addr    	smt_dest ;	/* destination address */
+	struct fddi_addr	smt_source ;	/* source address */
+	u_char			smt_class ;	/* NIF, SIF ... */
+	u_char			smt_type ;	/* req., response .. */
+	u_short			smt_version ;	/* version id */
+	u_int			smt_tid ;	/* transaction ID */
+	struct smt_sid		smt_sid ;	/* station ID */
+	u_short			smt_pad ;	/* pad with 0 */
+	u_short			smt_len ;	/* length of info field */
+} ;
+#define SWAP_SMTHEADER	"662sl8ss"
+
+#if	0
+/*
+ * MAC FC values
+ */
+#define FC_SMT_INFO	0x41		/* SMT info */
+#define FC_SMT_NSA	0x4f		/* SMT Next Station Addressing */
+#endif
+
+
+/*
+ * type codes
+ */
+#define SMT_ANNOUNCE	0x01		/* announcement */
+#define SMT_REQUEST	0x02		/* request */
+#define SMT_REPLY	0x03		/* reply */
+
+/*
+ * class codes
+ */
+#define SMT_NIF		0x01		/* neighbor information frames */
+#define SMT_SIF_CONFIG	0x02		/* station information configuration */
+#define SMT_SIF_OPER	0x03		/* station information operation */
+#define SMT_ECF		0x04		/* echo frames */
+#define SMT_RAF		0x05		/* resource allocation */
+#define SMT_RDF		0x06		/* request denied */
+#define SMT_SRF		0x07		/* status report */
+#define SMT_PMF_GET	0x08		/* parameter management get */
+#define SMT_PMF_SET	0x09		/* parameter management set */
+#define SMT_ESF		0xff		/* extended service */
+
+#define SMT_MAX_ECHO_LEN	4458	/* max length of SMT Echo */
+#if	defined(CONC) || defined(CONC_II)
+#define SMT_TEST_ECHO_LEN	50	/* test length of SMT Echo */
+#else
+#define SMT_TEST_ECHO_LEN	SMT_MAX_ECHO_LEN	/* test length */
+#endif
+
+#define SMT_MAX_INFO_LEN	(4352-20)	/* max length for SMT info */
+
+
+/*
+ * parameter types
+ */
+
+struct smt_para {
+	u_short	p_type ;		/* type */
+	u_short	p_len ;			/* length of parameter */
+} ;
+
+#define PARA_LEN	(sizeof(struct smt_para))
+
+#define SMTSETPARA(p,t)		(p)->para.p_type = (t),\
+				(p)->para.p_len = sizeof(*(p)) - PARA_LEN
+
+/*
+ * P01 : Upstream Neighbor Address, UNA
+ */
+#define SMT_P_UNA	0x0001		/* upstream neighbor address */
+#define SWAP_SMT_P_UNA	"s6"
+
+struct smt_p_una {
+	struct smt_para	para ;		/* generic parameter header */
+	u_short	una_pad ;
+	struct fddi_addr una_node ;	/* node address, zero if unknown */
+} ;
+
+/*
+ * P02 : Station Descriptor
+ */
+#define SMT_P_SDE	0x0002		/* station descriptor */
+#define SWAP_SMT_P_SDE	"1111"
+
+#define SMT_SDE_STATION		0	/* end node */
+#define SMT_SDE_CONCENTRATOR	1	/* concentrator */
+
+struct smt_p_sde {
+	struct smt_para	para ;		/* generic parameter header */
+	u_char	sde_type ;		/* station type */
+	u_char	sde_mac_count ;		/* number of MACs */
+	u_char	sde_non_master ;	/* number of A,B or S ports */
+	u_char	sde_master ;		/* number of S ports on conc. */
+} ;
+
+/*
+ * P03 : Station State
+ */
+#define SMT_P_STATE	0x0003		/* station state */
+#define SWAP_SMT_P_STATE	"scc"
+
+struct smt_p_state {
+	struct smt_para	para ;		/* generic parameter header */
+	u_short	st_pad ;
+	u_char	st_topology ;		/* topology */
+	u_char	st_dupl_addr ;		/* duplicate address detected */
+} ;
+#define SMT_ST_WRAPPED		(1<<0)	/* station wrapped */
+#define SMT_ST_UNATTACHED	(1<<1)	/* unattached concentrator */
+#define SMT_ST_TWISTED_A	(1<<2)	/* A-A connection, twisted ring */
+#define SMT_ST_TWISTED_B	(1<<3)	/* B-B connection, twisted ring */
+#define SMT_ST_ROOTED_S		(1<<4)	/* rooted station */
+#define SMT_ST_SRF		(1<<5)	/* SRF protocol supported */
+#define SMT_ST_SYNC_SERVICE	(1<<6)	/* use synchronous bandwidth */
+
+#define SMT_ST_MY_DUPA		(1<<0)	/* my station detected dupl. */
+#define SMT_ST_UNA_DUPA		(1<<1)	/* my UNA detected duplicate */
+
+/*
+ * P04 : timestamp
+ */
+#define SMT_P_TIMESTAMP	0x0004		/* time stamp */
+#define SWAP_SMT_P_TIMESTAMP	"8"
+struct smt_p_timestamp {
+	struct smt_para	para ;		/* generic parameter header */
+	u_char	ts_time[8] ;		/* time, resolution 80nS, unique */
+} ;
+
+/*
+ * P05 : station policies
+ */
+#define SMT_P_POLICY	0x0005		/* station policies */
+#define SWAP_SMT_P_POLICY	"ss"
+
+struct smt_p_policy {
+	struct smt_para	para ;		/* generic parameter header */
+	u_short	pl_config ;
+	u_short pl_connect ;		/* bit string POLICY_AA ... */
+} ;
+#define SMT_PL_HOLD		1	/* hold policy supported (Dual MAC) */
+
+/*
+ * P06 : latency equivalent
+ */
+#define SMT_P_LATENCY	0x0006		/* latency */
+#define SWAP_SMT_P_LATENCY	"ssss"
+
+/*
+ * note: latency has two phy entries by definition
+ * for a SAS, the 2nd one is null
+ */
+struct smt_p_latency {
+	struct smt_para	para ;		/* generic parameter header */
+	u_short	lt_phyout_idx1 ;	/* index */
+	u_short	lt_latency1 ;		/* latency , unit : byte clock */
+	u_short	lt_phyout_idx2 ;	/* 0 if SAS */
+	u_short	lt_latency2 ;		/* 0 if SAS */
+} ;
+
+/*
+ * P07 : MAC neighbors
+ */
+#define SMT_P_NEIGHBORS	0x0007		/* MAC neighbor description */
+#define SWAP_SMT_P_NEIGHBORS	"ss66"
+
+struct smt_p_neighbor {
+	struct smt_para	para ;		/* generic parameter header */
+	u_short	nb_mib_index ;		/* MIB index */
+	u_short	nb_mac_index ;		/* n+1 .. n+m, m = #MACs, n = #PHYs */
+	struct fddi_addr nb_una ;	/* UNA , 0 for unknown */
+	struct fddi_addr nb_dna ;	/* DNA , 0 for unknown */
+} ;
+
+/*
+ * PHY record
+ */
+#define SMT_PHY_A	0		/* A port */
+#define SMT_PHY_B	1		/* B port */
+#define SMT_PHY_S	2		/* slave port */
+#define SMT_PHY_M	3		/* master port */
+
+#define SMT_CS_DISABLED	0		/* connect state : disabled */
+#define SMT_CS_CONNECTING	1	/* connect state : connecting */
+#define SMT_CS_STANDBY	2		/* connect state : stand by */
+#define SMT_CS_ACTIVE	3		/* connect state : active */
+
+#define SMT_RM_NONE	0
+#define SMT_RM_MAC	1
+
+struct smt_phy_rec {
+	u_short	phy_mib_index ;		/* MIB index */
+	u_char	phy_type ;		/* A/B/S/M */
+	u_char	phy_connect_state ;	/* disabled/connecting/active */
+	u_char	phy_remote_type ;	/* A/B/S/M */
+	u_char	phy_remote_mac ;	/* none/remote */
+	u_short	phy_resource_idx ;	/* 1 .. n */
+} ;
+
+/*
+ * MAC record
+ */
+struct smt_mac_rec {
+	struct fddi_addr mac_addr ;		/* MAC address */
+	u_short		mac_resource_idx ;	/* n+1 .. n+m */
+} ;
+
+/*
+ * P08 : path descriptors
+ * should be really an array ; however our environment has a fixed number of
+ * PHYs and MACs
+ */
+#define SMT_P_PATH	0x0008			/* path descriptor */
+#define SWAP_SMT_P_PATH	"[6s]"
+
+struct smt_p_path {
+	struct smt_para	para ;		/* generic parameter header */
+	struct smt_phy_rec	pd_phy[2] ;	/* PHY A */
+	struct smt_mac_rec	pd_mac ;	/* MAC record */
+} ;
+
+/*
+ * P09 : MAC status
+ */
+#define SMT_P_MAC_STATUS	0x0009		/* MAC status */
+#define SWAP_SMT_P_MAC_STATUS	"sslllllllll"
+
+struct smt_p_mac_status {
+	struct smt_para	para ;		/* generic parameter header */
+	u_short st_mib_index ;		/* MIB index */
+	u_short	st_mac_index ;		/* n+1 .. n+m */
+	u_int	st_t_req ;		/* T_Req */
+	u_int	st_t_neg ;		/* T_Neg */
+	u_int	st_t_max ;		/* T_Max */
+	u_int	st_tvx_value ;		/* TVX_Value */
+	u_int	st_t_min ;		/* T_Min */
+	u_int	st_sba ;		/* synchr. bandwidth alloc */
+	u_int	st_frame_ct ;		/* frame counter */
+	u_int	st_error_ct ;		/* error counter */
+	u_int	st_lost_ct ;		/* lost frames counter */
+} ;
+
+/*
+ * P0A : PHY link error rate monitoring
+ */
+#define SMT_P_LEM	0x000a		/* link error monitor */
+#define SWAP_SMT_P_LEM	"ssccccll"
+/*
+ * units of lem_cutoff,lem_alarm,lem_estimate : 10**-x
+ */
+struct smt_p_lem {
+	struct smt_para	para ;		/* generic parameter header */
+	u_short	lem_mib_index ;		/* MIB index */
+	u_short	lem_phy_index ;		/* 1 .. n */
+	u_char	lem_pad2 ;		/* be nice and make it even . */
+	u_char	lem_cutoff ;		/* 0x4 .. 0xf, default 0x7 */
+	u_char	lem_alarm ;		/* 0x4 .. 0xf, default 0x8 */
+	u_char	lem_estimate ;		/* 0x0 .. 0xff */
+	u_int	lem_reject_ct ;		/* 0x00000000 .. 0xffffffff */
+	u_int	lem_ct ;		/* 0x00000000 .. 0xffffffff */
+} ;
+
+/*
+ * P0B : MAC frame counters
+ */
+#define SMT_P_MAC_COUNTER 0x000b	/* MAC frame counters */
+#define SWAP_SMT_P_MAC_COUNTER	"ssll"
+
+struct smt_p_mac_counter {
+	struct smt_para	para ;		/* generic parameter header */
+	u_short	mc_mib_index ;		/* MIB index */
+	u_short	mc_index ;		/* mac index */
+	u_int	mc_receive_ct ;		/* receive counter */
+	u_int	mc_transmit_ct ;	/* transmit counter */
+} ;
+
+/*
+ * P0C : MAC frame not copied counter
+ */
+#define SMT_P_MAC_FNC	0x000c		/* MAC frame not copied counter */
+#define SWAP_SMT_P_MAC_FNC	"ssl"
+
+struct smt_p_mac_fnc {
+	struct smt_para	para ;		/* generic parameter header */
+	u_short	nc_mib_index ;		/* MIB index */
+	u_short	nc_index ;		/* mac index */
+	u_int	nc_counter ;		/* not copied counter */
+} ;
+
+
+/*
+ * P0D : MAC priority values
+ */
+#define SMT_P_PRIORITY	0x000d		/* MAC priority values */
+#define SWAP_SMT_P_PRIORITY	"ssl"
+
+struct smt_p_priority {
+	struct smt_para	para ;		/* generic parameter header */
+	u_short	pr_mib_index ;		/* MIB index */
+	u_short	pr_index ;		/* mac index */
+	u_int	pr_priority[7] ;	/* priority values */
+} ;
+
+/*
+ * P0E : PHY elasticity buffer status
+ */
+#define SMT_P_EB	0x000e		/* PHY EB status */
+#define SWAP_SMT_P_EB	"ssl"
+
+struct smt_p_eb {
+	struct smt_para	para ;		/* generic parameter header */
+	u_short	eb_mib_index ;		/* MIB index */
+	u_short	eb_index ;		/* phy index */
+	u_int	eb_error_ct ;		/* # of eb overflows */
+} ;
+
+/*
+ * P0F : manufacturer field
+ */
+#define SMT_P_MANUFACTURER	0x000f	/* manufacturer field */
+#define SWAP_SMT_P_MANUFACTURER	""
+
+struct smp_p_manufacturer {
+	struct smt_para	para ;		/* generic parameter header */
+	u_char mf_data[32] ;		/* OUI + arbitrary data */
+} ;
+
+/*
+ * P10 : user field
+ */
+#define SMT_P_USER		0x0010	/* manufacturer field */
+#define SWAP_SMT_P_USER	""
+
+struct smp_p_user {
+	struct smt_para	para ;		/* generic parameter header */
+	u_char us_data[32] ;		/* arbitrary data */
+} ;
+
+
+
+/*
+ * P11 : echo data
+ */
+#define SMT_P_ECHODATA	0x0011		/* echo data */
+#define SWAP_SMT_P_ECHODATA	""
+
+struct smt_p_echo {
+	struct smt_para	para ;		/* generic parameter header */
+	u_char	ec_data[SMT_MAX_ECHO_LEN-4] ;	/* echo data */
+} ;
+
+/*
+ * P12 : reason code
+ */
+#define SMT_P_REASON	0x0012		/* reason code */
+#define SWAP_SMT_P_REASON	"l"
+
+struct smt_p_reason {
+	struct smt_para	para ;		/* generic parameter header */
+	u_int	rdf_reason ;		/* CLASS/VERSION */
+} ;
+#define SMT_RDF_CLASS	0x00000001	/* class not supported */
+#define SMT_RDF_VERSION	0x00000002	/* version not supported */
+#define SMT_RDF_SUCCESS	0x00000003	/* success (PMF) */
+#define SMT_RDF_BADSET	0x00000004	/* bad set count (PMF) */
+#define SMT_RDF_ILLEGAL 0x00000005	/* read only (PMF) */
+#define SMT_RDF_NOPARAM	0x6		/* parameter not supported (PMF) */
+#define SMT_RDF_RANGE	0x8		/* out of range */
+#define SMT_RDF_AUTHOR	0x9		/* not autohorized */
+#define SMT_RDF_LENGTH	0x0a		/* length error */
+#define SMT_RDF_TOOLONG	0x0b		/* length error */
+#define SMT_RDF_SBA	0x0d		/* SBA denied */
+
+/*
+ * P13 : refused frame beginning
+ */
+#define SMT_P_REFUSED	0x0013		/* refused frame beginning */
+#define SWAP_SMT_P_REFUSED	"l"
+
+struct smt_p_refused {
+	struct smt_para	para ;		/* generic parameter header */
+	u_int	ref_fc ;		/* 3 bytes 0 + FC */
+	struct smt_header	ref_header ;	/* refused header */
+} ;
+
+/*
+ * P14 : supported SMT versions
+ */
+#define SMT_P_VERSION	0x0014		/* SMT supported versions */
+#define SWAP_SMT_P_VERSION	"sccss"
+
+struct smt_p_version {
+	struct smt_para	para ;		/* generic parameter header */
+	u_short	v_pad ;
+	u_char	v_n ;			/* 1 .. 0xff, #versions */
+	u_char	v_index ;		/* 1 .. 0xff, index of op. v. */
+	u_short	v_version[1] ;		/* list of min. 1 version */
+	u_short	v_pad2 ;		/* pad if necessary */
+} ;
+
+/*
+ * P15 : Resource Type
+ */
+#define	SWAP_SMT_P0015		"l"
+
+struct smt_p_0015 {
+	struct smt_para	para ;		/* generic parameter header */
+	u_int		res_type ;	/* recsource type */
+} ;
+
+#define	SYNC_BW		0x00000001L	/* Synchronous Bandwidth */
+
+/*
+ * P16 : SBA Command
+ */
+#define	SWAP_SMT_P0016		"l"
+
+struct smt_p_0016 {
+	struct smt_para	para ;		/* generic parameter header */
+	u_int		sba_cmd ;	/* command for the SBA */
+} ;
+
+#define	REQUEST_ALLOCATION	0x1	/* req allocation of sync bandwidth */
+#define	REPORT_ALLOCATION	0x2	/* rep of sync bandwidth allocation */
+#define	CHANGE_ALLOCATION	0x3	/* forces a station using sync band-*/
+					/* width to change its current allo-*/
+					/* cation */
+
+/*
+ * P17 : SBA Payload Request
+ */
+#define	SWAP_SMT_P0017		"l"
+
+struct smt_p_0017 {
+	struct smt_para	para ;		/* generic parameter header */
+	int		sba_pl_req ;	/* total sync bandwidth measured in */
+} ;					/* bytes per 125 us */
+
+/*
+ * P18 : SBA Overhead Request
+ */
+#define	SWAP_SMT_P0018		"l"
+
+struct smt_p_0018 {
+	struct smt_para	para ;		/* generic parameter header */
+	int		sba_ov_req ;	/* total sync bandwidth req for overhead*/
+} ;					/* measuered in bytes per T_Neg */
+
+/*
+ * P19 : SBA Allocation Address
+ */
+#define	SWAP_SMT_P0019		"s6"
+
+struct smt_p_0019 {
+	struct smt_para	para ;		/* generic parameter header */
+	u_short		sba_pad ;
+	struct fddi_addr alloc_addr ;	/* Allocation Address */
+} ;
+
+/*
+ * P1A : SBA Category
+ */
+#define	SWAP_SMT_P001A		"l"
+
+struct smt_p_001a {
+	struct smt_para	para ;		/* generic parameter header */
+	u_int		category ;	/* Allocator defined classification */
+} ;
+
+/*
+ * P1B : Maximum T_Neg
+ */
+#define	SWAP_SMT_P001B		"l"
+
+struct smt_p_001b {
+	struct smt_para	para ;		/* generic parameter header */
+	u_int		max_t_neg ;	/* longest T_NEG for the sync service*/
+} ;
+
+/*
+ * P1C : Minimum SBA Segment Size
+ */
+#define	SWAP_SMT_P001C		"l"
+
+struct smt_p_001c {
+	struct smt_para	para ;		/* generic parameter header */
+	u_int		min_seg_siz ;	/* smallest number of bytes per frame*/
+} ;
+
+/*
+ * P1D : SBA Allocatable
+ */
+#define	SWAP_SMT_P001D		"l"
+
+struct smt_p_001d {
+	struct smt_para	para ;		/* generic parameter header */
+	u_int		allocatable ;	/* total sync bw available for alloc */
+} ;
+
+/*
+ * P20 0B : frame status capabilities
+ * NOTE: not in swap table, is used by smt.c AND PMF table
+ */
+#define SMT_P_FSC	0x200b
+/* #define SWAP_SMT_P_FSC	"ssss" */
+
+struct smt_p_fsc {
+	struct smt_para	para ;		/* generic parameter header */
+	u_short	fsc_pad0 ;
+	u_short	fsc_mac_index ;		/* mac index 1 .. ff */
+	u_short	fsc_pad1 ;
+	u_short	fsc_value ;		/* FSC_TYPE[0-2] */
+} ;
+
+#define FSC_TYPE0	0		/* "normal" node (A/C handling) */
+#define FSC_TYPE1	1		/* Special A/C indicator forwarding */
+#define FSC_TYPE2	2		/* Special A/C indicator forwarding */
+
+/*
+ * P00 21 : user defined authoriziation (see pmf.c)
+ */
+#define SMT_P_AUTHOR	0x0021
+
+/*
+ * notification parameters
+ */
+#define SWAP_SMT_P1048	"ll"
+struct smt_p_1048 {
+	u_int p1048_flag ;
+	u_int p1048_cf_state ;
+} ;
+
+/*
+ * NOTE: all 2xxx 3xxx and 4xxx must include the INDEX in the swap string,
+ *	even so the INDEX is NOT part of the struct.
+ *	INDEX is already swapped in pmf.c, format in string is '4'
+ */
+#define SWAP_SMT_P208C	"4lss66"
+struct smt_p_208c {
+	u_int			p208c_flag ;
+	u_short			p208c_pad ;
+	u_short			p208c_dupcondition ;
+	struct	fddi_addr	p208c_fddilong ;
+	struct	fddi_addr	p208c_fddiunalong ;
+} ;
+
+#define SWAP_SMT_P208D	"4lllll"
+struct smt_p_208d {
+	u_int			p208d_flag ;
+	u_int			p208d_frame_ct ;
+	u_int			p208d_error_ct ;
+	u_int			p208d_lost_ct ;
+	u_int			p208d_ratio ;
+} ;
+
+#define SWAP_SMT_P208E	"4llll"
+struct smt_p_208e {
+	u_int			p208e_flag ;
+	u_int			p208e_not_copied ;
+	u_int			p208e_copied ;
+	u_int			p208e_not_copied_ratio ;
+} ;
+
+#define SWAP_SMT_P208F	"4ll6666s6"
+
+struct smt_p_208f {
+	u_int			p208f_multiple ;
+	u_int			p208f_nacondition ;
+	struct fddi_addr	p208f_old_una ;
+	struct fddi_addr	p208f_new_una ;
+	struct fddi_addr	p208f_old_dna ;
+	struct fddi_addr	p208f_new_dna ;
+	u_short			p208f_curren_path ;
+	struct fddi_addr	p208f_smt_address ;
+} ;
+
+#define SWAP_SMT_P2090	"4lssl"
+
+struct smt_p_2090 {
+	u_int			p2090_multiple ;
+	u_short			p2090_availablepaths ;
+	u_short			p2090_currentpath ;
+	u_int			p2090_requestedpaths ;
+} ;
+
+/*
+ * NOTE:
+ * special kludge for parameters 320b,320f,3210
+ * these parameters are part of RAF frames
+ * RAF frames are parsed in SBA.C and must be swapped
+ * PMF.C has special code to avoid double swapping
+ */
+#ifdef	LITTLE_ENDIAN
+#define SBAPATHINDEX	(0x01000000L)
+#else
+#define SBAPATHINDEX	(0x01L)
+#endif
+
+#define	SWAP_SMT_P320B	"42s"
+
+struct	smt_p_320b {
+	struct smt_para para ;	/* generic parameter header */
+	u_int	mib_index ;
+	u_short path_pad ;
+	u_short	path_index ;
+} ;
+
+#define	SWAP_SMT_P320F	"4l"
+
+struct	smt_p_320f {
+	struct smt_para para ;	/* generic parameter header */
+	u_int	mib_index ;
+	u_int	mib_payload ;
+} ;
+
+#define	SWAP_SMT_P3210	"4l"
+
+struct	smt_p_3210 {
+	struct smt_para para ;	/* generic parameter header */
+	u_int	mib_index ;
+	u_int	mib_overhead ;
+} ;
+
+#define SWAP_SMT_P4050	"4l1111ll"
+
+struct smt_p_4050 {
+	u_int			p4050_flag ;
+	u_char			p4050_pad ;
+	u_char			p4050_cutoff ;
+	u_char			p4050_alarm ;
+	u_char			p4050_estimate ;
+	u_int			p4050_reject_ct ;
+	u_int			p4050_ct ;
+} ;
+
+#define SWAP_SMT_P4051	"4lssss"
+struct smt_p_4051 {
+	u_int			p4051_multiple ;
+	u_short			p4051_porttype ;
+	u_short			p4051_connectstate ;
+	u_short			p4051_pc_neighbor ;
+	u_short			p4051_pc_withhold ;
+} ;
+
+#define SWAP_SMT_P4052	"4ll"
+struct smt_p_4052 {
+	u_int			p4052_flag ;
+	u_int			p4052_eberrorcount ;
+} ;
+
+#define SWAP_SMT_P4053	"4lsslss"
+
+struct smt_p_4053 {
+	u_int			p4053_multiple ;
+	u_short			p4053_availablepaths ;
+	u_short			p4053_currentpath ;
+	u_int			p4053_requestedpaths ;
+	u_short			p4053_mytype ;
+	u_short			p4053_neighbortype ;
+} ;
+
+
+#define SMT_P_SETCOUNT	0x1035
+#define SWAP_SMT_P_SETCOUNT	"l8"
+
+struct smt_p_setcount {
+	struct smt_para	para ;		/* generic parameter header */
+	u_int		count ;
+	u_char		timestamp[8] ;
+} ;
+
+/*
+ * SMT FRAMES
+ */
+
+/*
+ * NIF : neighbor information frames
+ */
+struct smt_nif {
+	struct smt_header	smt ;		/* generic header */
+	struct smt_p_una	una ;		/* UNA */
+	struct smt_p_sde	sde ;		/* station descriptor */
+	struct smt_p_state	state ;		/* station state */
+#ifdef	SMT6_10
+	struct smt_p_fsc	fsc ;		/* frame status cap. */
+#endif
+} ;
+
+/*
+ * SIF : station information frames
+ */
+struct smt_sif_config {
+	struct smt_header	smt ;		/* generic header */
+	struct smt_p_timestamp	ts ;		/* time stamp */
+	struct smt_p_sde	sde ;		/* station descriptor */
+	struct smt_p_version	version ;	/* supported versions */
+	struct smt_p_state	state ;		/* station state */
+	struct smt_p_policy	policy ;	/* station policy */
+	struct smt_p_latency	latency ;	/* path latency */
+	struct smt_p_neighbor	neighbor ;	/* neighbors, we have only one*/
+#ifdef	OPT_PMF
+	struct smt_p_setcount	setcount ;	 /* Set Count mandatory */
+#endif
+	/* WARNING : path MUST BE LAST FIELD !!! (see smt.c:smt_fill_path) */
+	struct smt_p_path	path ;		/* path descriptor */
+} ;
+#define SIZEOF_SMT_SIF_CONFIG	(sizeof(struct smt_sif_config)- \
+				 sizeof(struct smt_p_path))
+
+struct smt_sif_operation {
+	struct smt_header	smt ;		/* generic header */
+	struct smt_p_timestamp	ts ;		/* time stamp */
+	struct smt_p_mac_status	status ;	/* mac status */
+	struct smt_p_mac_counter mc ;		/* MAC counter */
+	struct smt_p_mac_fnc 	fnc ;		/* MAC frame not copied */
+	struct smp_p_manufacturer man ;		/* manufacturer field */
+	struct smp_p_user	user ;		/* user field */
+#ifdef	OPT_PMF
+	struct smt_p_setcount	setcount ;	 /* Set Count mandatory */
+#endif
+	/* must be last */
+	struct smt_p_lem	lem[1] ;	/* phy lem status */
+} ;
+#define SIZEOF_SMT_SIF_OPERATION	(sizeof(struct smt_sif_operation)- \
+					 sizeof(struct smt_p_lem))
+
+/*
+ * ECF : echo frame
+ */
+struct smt_ecf {
+	struct smt_header	smt ;		/* generic header */
+	struct smt_p_echo	ec_echo ;	/* echo parameter */
+} ;
+#define SMT_ECF_LEN	(sizeof(struct smt_header)+sizeof(struct smt_para))
+
+/*
+ * RDF : request denied frame
+ */
+struct smt_rdf {
+	struct smt_header	smt ;		/* generic header */
+	struct smt_p_reason	reason ;	/* reason code */
+	struct smt_p_version	version ;	/* supported versions */
+	struct smt_p_refused	refused ;	/* refused frame fragment */
+} ;
+
+/*
+ * SBA Request Allocation Response Frame
+ */
+struct smt_sba_alc_res {
+	struct smt_header	smt ;		/* generic header */
+	struct smt_p_0015	s_type ;	/* resource type */
+	struct smt_p_0016	cmd ;		/* SBA command */
+	struct smt_p_reason	reason ;	/* reason code */
+	struct smt_p_320b	path ;		/* path type */
+	struct smt_p_320f	payload ;	/* current SBA payload */
+	struct smt_p_3210	overhead ;	/* current SBA overhead */
+	struct smt_p_0019	a_addr ;	/* Allocation Address */
+	struct smt_p_001a	cat ;		/* Category - from the request */
+	struct smt_p_001d	alloc ;		/* SBA Allocatable */
+} ;
+
+/*
+ * SBA Request Allocation Request Frame
+ */
+struct smt_sba_alc_req {
+	struct smt_header	smt ;		/* generic header */
+	struct smt_p_0015	s_type ;	/* resource type */
+	struct smt_p_0016	cmd ;		/* SBA command */
+	struct smt_p_320b	path ;		/* path type */
+	struct smt_p_0017	pl_req ;	/* requested payload */
+	struct smt_p_0018	ov_req ;	/* requested SBA overhead */
+	struct smt_p_320f	payload ;	/* current SBA payload */
+	struct smt_p_3210	overhead ;	/* current SBA overhead */
+	struct smt_p_0019	a_addr ;	/* Allocation Address */
+	struct smt_p_001a	cat ;		/* Category - from the request */
+	struct smt_p_001b	tneg ;		/* max T-NEG */
+	struct smt_p_001c	segm ;		/* minimum segment size */
+} ;
+
+/*
+ * SBA Change Allocation Request Frame
+ */
+struct smt_sba_chg {
+	struct smt_header	smt ;		/* generic header */
+	struct smt_p_0015	s_type ;	/* resource type */
+	struct smt_p_0016	cmd ;		/* SBA command */
+	struct smt_p_320b	path ;		/* path type */
+	struct smt_p_320f	payload ;	/* current SBA payload */
+	struct smt_p_3210	overhead ;	/* current SBA overhead */
+	struct smt_p_001a	cat ;		/* Category - from the request */
+} ;
+
+/*
+ * SBA Report Allocation Request Frame
+ */
+struct smt_sba_rep_req {
+	struct smt_header	smt ;		/* generic header */
+	struct smt_p_0015	s_type ;	/* resource type */
+	struct smt_p_0016	cmd ;		/* SBA command */
+} ;
+
+/*
+ * SBA Report Allocation Response Frame
+ */
+struct smt_sba_rep_res {
+	struct smt_header	smt ;		/* generic header */
+	struct smt_p_0015	s_type ;	/* resource type */
+	struct smt_p_0016	cmd ;		/* SBA command */
+	struct smt_p_320b	path ;		/* path type */
+	struct smt_p_320f	payload ;	/* current SBA payload */
+	struct smt_p_3210	overhead ;	/* current SBA overhead */
+} ;
+
+/*
+ * actions
+ */
+#define SMT_STATION_ACTION	1
+#define SMT_STATION_ACTION_CONNECT	0
+#define SMT_STATION_ACTION_DISCONNECT	1
+#define SMT_STATION_ACTION_PATHTEST	2
+#define SMT_STATION_ACTION_SELFTEST	3
+#define SMT_STATION_ACTION_DISABLE_A	4
+#define SMT_STATION_ACTION_DISABLE_B	5
+#define SMT_STATION_ACTION_DISABLE_M	6
+
+#define SMT_PORT_ACTION		2
+#define SMT_PORT_ACTION_MAINT	0
+#define SMT_PORT_ACTION_ENABLE	1
+#define SMT_PORT_ACTION_DISABLE	2
+#define SMT_PORT_ACTION_START	3
+#define SMT_PORT_ACTION_STOP	4
+
+#endif	/* _SMT_ */
diff --git a/drivers/net/fddi/skfp/h/smt_p.h b/drivers/net/fddi/skfp/h/smt_p.h
new file mode 100644
index 0000000..99f9be9
--- /dev/null
+++ b/drivers/net/fddi/skfp/h/smt_p.h
@@ -0,0 +1,326 @@
+/******************************************************************************
+ *
+ *	(C)Copyright 1998,1999 SysKonnect,
+ *	a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+ * defines for all SMT attributes
+ */
+
+/*
+ * this boring file was produced by perl
+ * thanks Larry !
+ */
+#define	SMT_P0012	0x0012
+
+#define	SMT_P0015	0x0015
+#define	SMT_P0016	0x0016
+#define	SMT_P0017	0x0017
+#define	SMT_P0018	0x0018
+#define	SMT_P0019	0x0019
+
+#define	SMT_P001A	0x001a
+#define	SMT_P001B	0x001b
+#define	SMT_P001C	0x001c
+#define	SMT_P001D	0x001d
+
+#define	SMT_P100A	0x100a
+#define	SMT_P100B	0x100b
+#define	SMT_P100C	0x100c
+#define	SMT_P100D	0x100d
+#define	SMT_P100E	0x100e
+#define	SMT_P100F	0x100f
+#define	SMT_P1010	0x1010
+#define	SMT_P1011	0x1011
+#define	SMT_P1012	0x1012
+#define	SMT_P1013	0x1013
+#define	SMT_P1014	0x1014
+#define	SMT_P1015	0x1015
+#define	SMT_P1016	0x1016
+#define	SMT_P1017	0x1017
+#define	SMT_P1018	0x1018
+#define	SMT_P1019	0x1019
+#define	SMT_P101A	0x101a
+#define	SMT_P101B	0x101b
+#define	SMT_P101C	0x101c
+#define	SMT_P101D	0x101d
+#define	SMT_P101E	0x101e
+#define	SMT_P101F	0x101f
+#define	SMT_P1020	0x1020
+#define	SMT_P1021	0x1021
+#define	SMT_P1022	0x1022
+#define	SMT_P1023	0x1023
+#define	SMT_P1024	0x1024
+#define	SMT_P1025	0x1025
+#define	SMT_P1026	0x1026
+#define	SMT_P1027	0x1027
+#define	SMT_P1028	0x1028
+#define	SMT_P1029	0x1029
+#define	SMT_P102A	0x102a
+#define	SMT_P102B	0x102b
+#define	SMT_P102C	0x102c
+#define	SMT_P102D	0x102d
+#define	SMT_P102E	0x102e
+#define	SMT_P102F	0x102f
+#define	SMT_P1030	0x1030
+#define	SMT_P1031	0x1031
+#define	SMT_P1032	0x1032
+#define	SMT_P1033	0x1033
+#define	SMT_P1034	0x1034
+#define	SMT_P1035	0x1035
+#define	SMT_P1036	0x1036
+#define	SMT_P1037	0x1037
+#define	SMT_P1038	0x1038
+#define	SMT_P1039	0x1039
+#define	SMT_P103A	0x103a
+#define	SMT_P103B	0x103b
+#define	SMT_P103C	0x103c
+#define	SMT_P103D	0x103d
+#define	SMT_P103E	0x103e
+#define	SMT_P103F	0x103f
+#define	SMT_P1040	0x1040
+#define	SMT_P1041	0x1041
+#define	SMT_P1042	0x1042
+#define	SMT_P1043	0x1043
+#define	SMT_P1044	0x1044
+#define	SMT_P1045	0x1045
+#define	SMT_P1046	0x1046
+#define	SMT_P1047	0x1047
+#define	SMT_P1048	0x1048
+#define	SMT_P1049	0x1049
+#define	SMT_P104A	0x104a
+#define	SMT_P104B	0x104b
+#define	SMT_P104C	0x104c
+#define	SMT_P104D	0x104d
+#define	SMT_P104E	0x104e
+#define	SMT_P104F	0x104f
+#define	SMT_P1050	0x1050
+#define	SMT_P1051	0x1051
+#define	SMT_P1052	0x1052
+#define	SMT_P1053	0x1053
+#define	SMT_P1054	0x1054
+
+#define	SMT_P10F0	0x10f0
+#define	SMT_P10F1	0x10f1
+#ifdef	ESS
+#define	SMT_P10F2	0x10f2
+#define	SMT_P10F3	0x10f3
+#define	SMT_P10F4	0x10f4
+#define	SMT_P10F5	0x10f5
+#define	SMT_P10F6	0x10f6
+#define	SMT_P10F7	0x10f7
+#endif
+#ifdef	SBA
+#define	SMT_P10F8	0x10f8
+#define	SMT_P10F9	0x10f9
+#endif
+
+#define	SMT_P200A	0x200a
+#define	SMT_P200B	0x200b
+#define	SMT_P200C	0x200c
+#define	SMT_P200D	0x200d
+#define	SMT_P200E	0x200e
+#define	SMT_P200F	0x200f
+#define	SMT_P2010	0x2010
+#define	SMT_P2011	0x2011
+#define	SMT_P2012	0x2012
+#define	SMT_P2013	0x2013
+#define	SMT_P2014	0x2014
+#define	SMT_P2015	0x2015
+#define	SMT_P2016	0x2016
+#define	SMT_P2017	0x2017
+#define	SMT_P2018	0x2018
+#define	SMT_P2019	0x2019
+#define	SMT_P201A	0x201a
+#define	SMT_P201B	0x201b
+#define	SMT_P201C	0x201c
+#define	SMT_P201D	0x201d
+#define	SMT_P201E	0x201e
+#define	SMT_P201F	0x201f
+#define	SMT_P2020	0x2020
+#define	SMT_P2021	0x2021
+#define	SMT_P2022	0x2022
+#define	SMT_P2023	0x2023
+#define	SMT_P2024	0x2024
+#define	SMT_P2025	0x2025
+#define	SMT_P2026	0x2026
+#define	SMT_P2027	0x2027
+#define	SMT_P2028	0x2028
+#define	SMT_P2029	0x2029
+#define	SMT_P202A	0x202a
+#define	SMT_P202B	0x202b
+#define	SMT_P202C	0x202c
+#define	SMT_P202D	0x202d
+#define	SMT_P202E	0x202e
+#define	SMT_P202F	0x202f
+#define	SMT_P2030	0x2030
+#define	SMT_P2031	0x2031
+#define	SMT_P2032	0x2032
+#define	SMT_P2033	0x2033
+#define	SMT_P2034	0x2034
+#define	SMT_P2035	0x2035
+#define	SMT_P2036	0x2036
+#define	SMT_P2037	0x2037
+#define	SMT_P2038	0x2038
+#define	SMT_P2039	0x2039
+#define	SMT_P203A	0x203a
+#define	SMT_P203B	0x203b
+#define	SMT_P203C	0x203c
+#define	SMT_P203D	0x203d
+#define	SMT_P203E	0x203e
+#define	SMT_P203F	0x203f
+#define	SMT_P2040	0x2040
+#define	SMT_P2041	0x2041
+#define	SMT_P2042	0x2042
+#define	SMT_P2043	0x2043
+#define	SMT_P2044	0x2044
+#define	SMT_P2045	0x2045
+#define	SMT_P2046	0x2046
+#define	SMT_P2047	0x2047
+#define	SMT_P2048	0x2048
+#define	SMT_P2049	0x2049
+#define	SMT_P204A	0x204a
+#define	SMT_P204B	0x204b
+#define	SMT_P204C	0x204c
+#define	SMT_P204D	0x204d
+#define	SMT_P204E	0x204e
+#define	SMT_P204F	0x204f
+#define	SMT_P2050	0x2050
+#define	SMT_P2051	0x2051
+#define	SMT_P2052	0x2052
+#define	SMT_P2053	0x2053
+#define	SMT_P2054	0x2054
+#define	SMT_P2055	0x2055
+#define	SMT_P2056	0x2056
+#define	SMT_P2057	0x2057
+#define	SMT_P2058	0x2058
+#define	SMT_P2059	0x2059
+#define	SMT_P205A	0x205a
+#define	SMT_P205B	0x205b
+#define	SMT_P205C	0x205c
+#define	SMT_P205D	0x205d
+#define	SMT_P205E	0x205e
+#define	SMT_P205F	0x205f
+#define	SMT_P2060	0x2060
+#define	SMT_P2061	0x2061
+#define	SMT_P2062	0x2062
+#define	SMT_P2063	0x2063
+#define	SMT_P2064	0x2064
+#define	SMT_P2065	0x2065
+#define	SMT_P2066	0x2066
+#define	SMT_P2067	0x2067
+#define	SMT_P2068	0x2068
+#define	SMT_P2069	0x2069
+#define	SMT_P206A	0x206a
+#define	SMT_P206B	0x206b
+#define	SMT_P206C	0x206c
+#define	SMT_P206D	0x206d
+#define	SMT_P206E	0x206e
+#define	SMT_P206F	0x206f
+#define	SMT_P2070	0x2070
+#define	SMT_P2071	0x2071
+#define	SMT_P2072	0x2072
+#define	SMT_P2073	0x2073
+#define	SMT_P2074	0x2074
+#define	SMT_P2075	0x2075
+#define	SMT_P2076	0x2076
+
+#define	SMT_P208C	0x208c
+#define	SMT_P208D	0x208d
+#define	SMT_P208E	0x208e
+#define	SMT_P208F	0x208f
+#define	SMT_P2090	0x2090
+
+#define	SMT_P20F0	0x20F0
+#define	SMT_P20F1	0x20F1
+
+#define	SMT_P320A	0x320a
+#define	SMT_P320B	0x320b
+#define	SMT_P320C	0x320c
+#define	SMT_P320D	0x320d
+#define	SMT_P320E	0x320e
+#define	SMT_P320F	0x320f
+#define	SMT_P3210	0x3210
+#define	SMT_P3211	0x3211
+#define	SMT_P3212	0x3212
+#define	SMT_P3213	0x3213
+#define	SMT_P3214	0x3214
+#define	SMT_P3215	0x3215
+#define	SMT_P3216	0x3216
+#define	SMT_P3217	0x3217
+
+#define	SMT_P400A	0x400a
+#define	SMT_P400B	0x400b
+#define	SMT_P400C	0x400c
+#define	SMT_P400D	0x400d
+#define	SMT_P400E	0x400e
+#define	SMT_P400F	0x400f
+#define	SMT_P4010	0x4010
+#define	SMT_P4011	0x4011
+#define	SMT_P4012	0x4012
+#define	SMT_P4013	0x4013
+#define	SMT_P4014	0x4014
+#define	SMT_P4015	0x4015
+#define	SMT_P4016	0x4016
+#define	SMT_P4017	0x4017
+#define	SMT_P4018	0x4018
+#define	SMT_P4019	0x4019
+#define	SMT_P401A	0x401a
+#define	SMT_P401B	0x401b
+#define	SMT_P401C	0x401c
+#define	SMT_P401D	0x401d
+#define	SMT_P401E	0x401e
+#define	SMT_P401F	0x401f
+#define	SMT_P4020	0x4020
+#define	SMT_P4021	0x4021
+#define	SMT_P4022	0x4022
+#define	SMT_P4023	0x4023
+#define	SMT_P4024	0x4024
+#define	SMT_P4025	0x4025
+#define	SMT_P4026	0x4026
+#define	SMT_P4027	0x4027
+#define	SMT_P4028	0x4028
+#define	SMT_P4029	0x4029
+#define	SMT_P402A	0x402a
+#define	SMT_P402B	0x402b
+#define	SMT_P402C	0x402c
+#define	SMT_P402D	0x402d
+#define	SMT_P402E	0x402e
+#define	SMT_P402F	0x402f
+#define	SMT_P4030	0x4030
+#define	SMT_P4031	0x4031
+#define	SMT_P4032	0x4032
+#define	SMT_P4033	0x4033
+#define	SMT_P4034	0x4034
+#define	SMT_P4035	0x4035
+#define	SMT_P4036	0x4036
+#define	SMT_P4037	0x4037
+#define	SMT_P4038	0x4038
+#define	SMT_P4039	0x4039
+#define	SMT_P403A	0x403a
+#define	SMT_P403B	0x403b
+#define	SMT_P403C	0x403c
+#define	SMT_P403D	0x403d
+#define	SMT_P403E	0x403e
+#define	SMT_P403F	0x403f
+#define	SMT_P4040	0x4040
+#define	SMT_P4041	0x4041
+#define	SMT_P4042	0x4042
+#define	SMT_P4043	0x4043
+#define	SMT_P4044	0x4044
+#define	SMT_P4045	0x4045
+#define	SMT_P4046	0x4046
+
+#define	SMT_P4050	0x4050
+#define	SMT_P4051	0x4051
+#define	SMT_P4052	0x4052
+#define	SMT_P4053	0x4053
diff --git a/drivers/net/fddi/skfp/h/smtstate.h b/drivers/net/fddi/skfp/h/smtstate.h
new file mode 100644
index 0000000..62fe695
--- /dev/null
+++ b/drivers/net/fddi/skfp/h/smtstate.h
@@ -0,0 +1,106 @@
+/******************************************************************************
+ *
+ *	(C)Copyright 1998,1999 SysKonnect,
+ *	a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+#ifndef _SKFP_H_SMTSTATE_H_
+#define _SKFP_H_SMTSTATE_H_
+
+/*
+ *	SMT state definitions
+ */
+
+#ifndef	KERNEL
+/*
+ * PCM states
+ */
+#define PC0_OFF			0
+#define PC1_BREAK		1
+#define PC2_TRACE		2
+#define PC3_CONNECT		3
+#define PC4_NEXT		4
+#define PC5_SIGNAL		5
+#define PC6_JOIN		6
+#define PC7_VERIFY		7
+#define PC8_ACTIVE		8
+#define PC9_MAINT		9
+
+/*
+ * PCM modes
+ */
+#define PM_NONE			0
+#define PM_PEER			1
+#define PM_TREE			2
+
+/*
+ * PCM type
+ */
+#define TA			0
+#define TB			1
+#define TS			2
+#define TM			3
+#define TNONE			4
+
+/*
+ * CFM states
+ */
+#define SC0_ISOLATED	0		/* isolated */
+#define SC1_WRAP_A	5		/* wrap A */
+#define SC2_WRAP_B	6		/* wrap B */
+#define SC4_THRU_A	12		/* through A */
+#define SC5_THRU_B	7		/* through B (SMt 6.2) */
+#define SC7_WRAP_S	8		/* SAS */
+
+/*
+ * ECM states
+ */
+#define EC0_OUT		0
+#define EC1_IN		1
+#define EC2_TRACE	2
+#define EC3_LEAVE	3
+#define EC4_PATH_TEST	4
+#define EC5_INSERT	5
+#define EC6_CHECK	6
+#define EC7_DEINSERT	7
+
+/*
+ * RMT states
+ */
+#define RM0_ISOLATED	0
+#define RM1_NON_OP	1		/* not operational */
+#define RM2_RING_OP	2		/* ring operational */
+#define RM3_DETECT	3		/* detect dupl addresses */
+#define RM4_NON_OP_DUP	4		/* dupl. addr detected */
+#define RM5_RING_OP_DUP	5		/* ring oper. with dupl. addr */
+#define RM6_DIRECTED	6		/* sending directed beacons */
+#define RM7_TRACE	7		/* trace initiated */
+#endif
+
+struct pcm_state {
+	unsigned char	pcm_type ;		/* TA TB TS TM */
+	unsigned char	pcm_state ;		/* state PC[0-9]_* */
+	unsigned char	pcm_mode ;		/* PM_{NONE,PEER,TREE} */
+	unsigned char	pcm_neighbor ;		/* TA TB TS TM */
+	unsigned char	pcm_bsf ;		/* flag bs : TRUE/FALSE */
+	unsigned char	pcm_lsf ;		/* flag ls : TRUE/FALSE */
+	unsigned char	pcm_lct_fail ;		/* counter lct_fail */
+	unsigned char	pcm_ls_rx ;		/* rx line state */
+	short		pcm_r_val ;		/* signaling bits */
+	short		pcm_t_val ;		/* signaling bits */
+} ;
+
+struct smt_state {
+	struct pcm_state pcm_state[NUMPHYS] ;	/* port A & port B */
+} ;
+
+#endif
+
diff --git a/drivers/net/fddi/skfp/h/supern_2.h b/drivers/net/fddi/skfp/h/supern_2.h
new file mode 100644
index 0000000..0b73690
--- /dev/null
+++ b/drivers/net/fddi/skfp/h/supern_2.h
@@ -0,0 +1,1059 @@
+/******************************************************************************
+ *
+ *	(C)Copyright 1998,1999 SysKonnect,
+ *	a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+	defines for AMD Supernet II chip set
+	the chips are referred to as
+		FPLUS	Formac Plus
+		PLC	Physical Layer
+
+	added defines for AMD Supernet III chip set
+	added comments on differences between Supernet II and Supernet III
+	added defines for the Motorola ELM (MOT_ELM)
+*/
+
+#ifndef	_SUPERNET_
+#define _SUPERNET_
+
+/*
+ * Define Supernet 3 when used
+ */
+#ifdef	PCI
+#ifndef	SUPERNET_3
+#define	SUPERNET_3
+#endif
+#define TAG
+#endif
+
+#define	MB	0xff
+#define	MW	0xffff
+#define	MD	0xffffffff
+
+/*
+ * FORMAC frame status (rx_msext)
+ */
+#define	FS_EI		(1<<2)
+#define	FS_AI		(1<<1)
+#define	FS_CI		(1<<0)
+
+#define FS_MSVALID	(1<<15)		/* end of queue */
+#define FS_MSRABT	(1<<14)		/* frame was aborted during reception*/
+#define FS_SSRCRTG	(1<<12)		/* if SA has set MSB (source-routing)*/
+#define FS_SEAC2	(FS_EI<<9)	/* error indicator */
+#define FS_SEAC1	(FS_AI<<9)	/* address indicator */
+#define FS_SEAC0	(FS_CI<<9)	/* copy indicator */
+#define FS_SFRMERR	(1<<8)		/* error detected (CRC or length) */
+#define FS_SADRRG	(1<<7)		/* address recognized */
+#define FS_SFRMTY2	(1<<6)		/* frame-class bit */
+#define FS_SFRMTY1	(1<<5)		/* frame-type bit (impementor) */
+#define FS_SFRMTY0	(1<<4)		/* frame-type bit (LLC) */
+#define FS_ERFBB1	(1<<1)		/* byte offset (depends on LSB bit) */
+#define FS_ERFBB0	(1<<0)		/*  - " - */
+
+/*
+ * status frame type
+ */
+#define	FRM_SMT		(0)	/* asynchr. frames */
+#define	FRM_LLCA	(1)
+#define	FRM_IMPA	(2)	
+#define	FRM_MAC		(4)	/* synchr. frames */
+#define	FRM_LLCS	(5)
+#define	FRM_IMPS	(6)
+
+/*
+ * bits in rx_descr.i	(receive frame status word)
+ */
+#define RX_MSVALID	((long)1<<31)	/* memory status valid */
+#define RX_MSRABT	((long)1<<30)	/* memory status receive abort */
+#define RX_FS_E		((long)FS_SEAC2<<16)	/* error indicator */
+#define RX_FS_A		((long)FS_SEAC1<<16)	/* address indicator */
+#define RX_FS_C		((long)FS_SEAC0<<16)	/* copy indicator */
+#define RX_FS_CRC	((long)FS_SFRMERR<<16)/* error detected */
+#define RX_FS_ADDRESS	((long)FS_SADRRG<<16)	/* address recognized */
+#define RX_FS_MAC	((long)FS_SFRMTY2<<16)/* MAC frame */
+#define RX_FS_SMT	((long)0<<16)		/* SMT frame */
+#define RX_FS_IMPL	((long)FS_SFRMTY1<<16)/* implementer frame */
+#define RX_FS_LLC	((long)FS_SFRMTY0<<16)/* LLC frame */
+
+/*
+ * receive frame descriptor
+ */
+union rx_descr {
+	struct {
+#ifdef	LITTLE_ENDIAN
+	unsigned	rx_length :16 ;	/* frame length lower/upper byte */
+	unsigned	rx_erfbb  :2 ;	/* received frame byte boundary */
+	unsigned	rx_reserv2:2 ;	/* reserved */	
+	unsigned	rx_sfrmty :3 ;	/* frame type bits */
+	unsigned	rx_sadrrg :1 ;	/* DA == MA or broad-/multicast */
+	unsigned	rx_sfrmerr:1 ;	/* received frame not valid */
+	unsigned	rx_seac0  :1 ;	/* frame-copied  C-indicator */
+	unsigned	rx_seac1  :1 ;	/* address-match A-indicator */
+	unsigned	rx_seac2  :1 ;	/* frame-error   E-indicator */
+	unsigned	rx_ssrcrtg:1 ;	/* == 1 SA has MSB set */
+	unsigned	rx_reserv1:1 ;	/* reserved */	
+	unsigned	rx_msrabt :1 ;	/* memory status receive abort */
+	unsigned	rx_msvalid:1 ;	/* memory status valid */
+#else
+	unsigned	rx_msvalid:1 ;	/* memory status valid */
+	unsigned	rx_msrabt :1 ;	/* memory status receive abort */
+	unsigned	rx_reserv1:1 ;	/* reserved */	
+	unsigned	rx_ssrcrtg:1 ;	/* == 1 SA has MSB set */
+	unsigned	rx_seac2  :1 ;	/* frame-error   E-indicator */
+	unsigned	rx_seac1  :1 ;	/* address-match A-indicator */
+	unsigned	rx_seac0  :1 ;	/* frame-copied  C-indicator */
+	unsigned	rx_sfrmerr:1 ;	/* received frame not valid */
+	unsigned	rx_sadrrg :1 ;	/* DA == MA or broad-/multicast */
+	unsigned	rx_sfrmty :3 ;	/* frame type bits */
+	unsigned	rx_erfbb  :2 ;	/* received frame byte boundary */
+	unsigned	rx_reserv2:2 ;	/* reserved */	
+	unsigned	rx_length :16 ;	/* frame length lower/upper byte */
+#endif
+	} r ;
+	long	i ;
+} ;
+
+/* defines for Receive Frame Descriptor access */
+#define RD_S_ERFBB	0x00030000L	/* received frame byte boundary */
+#define RD_S_RES2	0x000c0000L	/* reserved */
+#define RD_S_SFRMTY	0x00700000L	/* frame type bits */
+#define RD_S_SADRRG	0x00800000L	/* DA == MA or broad-/multicast */
+#define RD_S_SFRMERR	0x01000000L	/* received frame not valid */
+#define	RD_S_SEAC	0x0e000000L	/* frame status indicators */
+#define RD_S_SEAC0	0x02000000L	/* frame-copied  case-indicator */
+#define RD_S_SEAC1	0x04000000L	/* address-match A-indicator */
+#define RD_S_SEAC2	0x08000000L	/* frame-error   E-indicator */
+#define RD_S_SSRCRTG	0x10000000L	/* == 1 SA has MSB set */
+#define RD_S_RES1	0x20000000L	/* reserved */
+#define RD_S_MSRABT	0x40000000L	/* memory status receive abort */
+#define RD_S_MSVALID	0x80000000L	/* memory status valid */
+
+#define	RD_STATUS	0xffff0000L
+#define	RD_LENGTH	0x0000ffffL
+
+/* defines for Receive Frames Status Word values */
+/*RD_S_SFRMTY*/
+#define RD_FRM_SMT	(unsigned long)(0<<20)     /* asynchr. frames */
+#define RD_FRM_LLCA	(unsigned long)(1<<20)
+#define RD_FRM_IMPA	(unsigned long)(2<<20)
+#define RD_FRM_MAC	(unsigned long)(4<<20)     /* synchr. frames */
+#define RD_FRM_LLCS	(unsigned long)(5<<20)
+#define RD_FRM_IMPS	(unsigned long)(6<<20)
+
+#define TX_DESCRIPTOR	0x40000000L
+#define TX_OFFSET_3	0x18000000L
+
+#define TXP1	2
+
+/*
+ * transmit frame descriptor
+ */
+union tx_descr {
+	struct {
+#ifdef	LITTLE_ENDIAN
+	unsigned	tx_length:16 ;	/* frame length lower/upper byte */
+	unsigned	tx_res	 :8 ;	/* reserved 	 (bit 16..23) */
+	unsigned	tx_xmtabt:1 ;	/* transmit abort */
+	unsigned	tx_nfcs  :1 ;	/* no frame check sequence */
+	unsigned	tx_xdone :1 ;	/* give up token */
+	unsigned	tx_rpxm  :2 ;	/* byte offset */
+	unsigned	tx_pat1  :2 ;	/* must be TXP1 */
+	unsigned	tx_more	 :1 ;	/* more frame in chain */
+#else
+	unsigned	tx_more	 :1 ;	/* more frame in chain */
+	unsigned	tx_pat1  :2 ;	/* must be TXP1 */
+	unsigned	tx_rpxm  :2 ;	/* byte offset */
+	unsigned	tx_xdone :1 ;	/* give up token */
+	unsigned	tx_nfcs  :1 ;	/* no frame check sequence */
+	unsigned	tx_xmtabt:1 ;	/* transmit abort */
+	unsigned	tx_res	 :8 ;	/* reserved 	 (bit 16..23) */
+	unsigned	tx_length:16 ;	/* frame length lower/upper byte */
+#endif
+	} t ;
+	long	i ;
+} ;
+
+/* defines for Transmit Descriptor access */
+#define	TD_C_MORE	0x80000000L	/* more frame in chain */
+#define	TD_C_DESCR	0x60000000L	/* must be TXP1 */
+#define	TD_C_TXFBB	0x18000000L	/* byte offset */
+#define	TD_C_XDONE	0x04000000L	/* give up token */
+#define TD_C_NFCS	0x02000000L	/* no frame check sequence */
+#define TD_C_XMTABT	0x01000000L	/* transmit abort */
+
+#define	TD_C_LNCNU	0x0000ff00L	
+#define TD_C_LNCNL	0x000000ffL
+#define TD_C_LNCN	0x0000ffffL	/* frame length lower/upper byte */
+ 
+/*
+ * transmit pointer
+ */
+union tx_pointer {
+	struct t {
+#ifdef	LITTLE_ENDIAN
+	unsigned	tp_pointer:16 ;	/* pointer to tx_descr (low/high) */
+	unsigned	tp_res	  :8 ;	/* reserved 	 (bit 16..23) */
+	unsigned	tp_pattern:8 ;	/* fixed pattern (bit 24..31) */
+#else
+	unsigned	tp_pattern:8 ;	/* fixed pattern (bit 24..31) */
+	unsigned	tp_res	  :8 ;	/* reserved 	 (bit 16..23) */
+	unsigned	tp_pointer:16 ;	/* pointer to tx_descr (low/high) */
+#endif
+	} t ;
+	long	i ;
+} ;
+
+/* defines for Nontag Mode Pointer access */
+#define	TD_P_CNTRL	0xff000000L
+#define TD_P_RPXU	0x0000ff00L
+#define TD_P_RPXL	0x000000ffL
+#define TD_P_RPX	0x0000ffffL
+
+
+#define TX_PATTERN	0xa0
+#define TX_POINTER_END	0xa0000000L
+#define TX_INT_PATTERN	0xa0000000L
+
+struct tx_queue {
+	struct tx_queue *tq_next ;
+	u_short tq_pack_offset ;	/* offset buffer memory */
+	u_char  tq_pad[2] ;
+} ;
+
+/*
+	defines for FORMAC Plus (Am79C830)
+*/
+
+/*
+ *  FORMAC+ read/write (r/w) registers
+ */
+#define FM_CMDREG1	0x00		/* write command reg 1 instruction */
+#define FM_CMDREG2	0x01		/* write command reg 2 instruction */
+#define FM_ST1U		0x00		/* read upper 16-bit of status reg 1 */
+#define FM_ST1L		0x01		/* read lower 16-bit of status reg 1 */
+#define FM_ST2U		0x02		/* read upper 16-bit of status reg 2 */
+#define FM_ST2L		0x03		/* read lower 16-bit of status reg 2 */
+#define FM_IMSK1U	0x04		/* r/w upper 16-bit of IMSK 1 */
+#define FM_IMSK1L	0x05		/* r/w lower 16-bit of IMSK 1 */
+#define FM_IMSK2U	0x06		/* r/w upper 16-bit of IMSK 2 */
+#define FM_IMSK2L	0x07		/* r/w lower 16-bit of IMSK 2 */
+#define FM_SAID		0x08		/* r/w short addr.-individual */
+#define FM_LAIM		0x09		/* r/w long addr.-ind. (MSW of LAID) */
+#define FM_LAIC		0x0a		/* r/w long addr.-ind. (middle)*/
+#define FM_LAIL		0x0b		/* r/w long addr.-ind. (LSW) */
+#define FM_SAGP		0x0c		/* r/w short address-group */
+#define FM_LAGM		0x0d		/* r/w long addr.-gr. (MSW of LAGP) */
+#define FM_LAGC		0x0e		/* r/w long addr.-gr. (middle) */
+#define FM_LAGL		0x0f		/* r/w long addr.-gr. (LSW) */
+#define FM_MDREG1	0x10		/* r/w 16-bit mode reg 1 */
+#define FM_STMCHN	0x11		/* read state-machine reg */
+#define FM_MIR1		0x12		/* read upper 16-bit of MAC Info Reg */
+#define FM_MIR0		0x13		/* read lower 16-bit of MAC Info Reg */
+#define FM_TMAX		0x14		/* r/w 16-bit TMAX reg */
+#define FM_TVX		0x15		/* write 8-bit TVX reg with NP7-0
+					   read TVX on NP7-0, timer on NP15-8*/
+#define FM_TRT		0x16		/* r/w upper 16-bit of TRT timer */
+#define FM_THT		0x17		/* r/w upper 16-bit of THT timer */
+#define FM_TNEG		0x18		/* read upper 16-bit of TNEG (TTRT) */
+#define FM_TMRS		0x19		/* read lower 5-bit of TNEG,TRT,THT */
+			/* F E D C  B A 9 8  7 6 5 4  3 2 1 0
+			   x |-TNEG4-0| |-TRT4-0-| |-THT4-0-| (x-late count) */
+#define FM_TREQ0	0x1a		/* r/w 16-bit TREQ0 reg (LSW of TRT) */
+#define FM_TREQ1	0x1b		/* r/w 16-bit TREQ1 reg (MSW of TRT) */
+#define FM_PRI0		0x1c		/* r/w priority r. for asyn.-queue 0 */
+#define FM_PRI1		0x1d		/* r/w priority r. for asyn.-queue 1 */
+#define FM_PRI2		0x1e		/* r/w priority r. for asyn.-queue 2 */
+#define FM_TSYNC	0x1f		/* r/w 16-bit of the TSYNC register */
+#define FM_MDREG2	0x20		/* r/w 16-bit mode reg 2 */
+#define FM_FRMTHR	0x21		/* r/w the frame threshold register */
+#define FM_EACB		0x22		/* r/w end addr of claim/beacon area */
+#define FM_EARV		0x23		/* r/w end addr of receive queue */
+/* Supernet 3 */
+#define	FM_EARV1	FM_EARV
+
+#define FM_EAS		0x24		/* r/w end addr of synchr. queue */
+#define FM_EAA0		0x25		/* r/w end addr of asyn. queue 0 */
+#define FM_EAA1		0x26		/* r/w end addr of asyn. queue 1 */
+#define FM_EAA2		0x27		/* r/w end addr of asyn. queue 2 */
+#define FM_SACL		0x28		/* r/w start addr of claim frame */
+#define FM_SABC		0x29		/* r/w start addr of beacon frame */
+#define FM_WPXSF	0x2a		/* r/w the write ptr. for special fr.*/
+#define FM_RPXSF	0x2b		/* r/w the read ptr. for special fr. */
+#define FM_RPR		0x2d		/* r/w the read ptr. for receive qu. */
+#define FM_WPR		0x2e		/* r/w the write ptr. for receive qu.*/
+#define FM_SWPR		0x2f		/* r/w the shadow wr.-ptr. for rec.q.*/
+/* Supernet 3 */ 
+#define FM_RPR1         FM_RPR   
+#define FM_WPR1         FM_WPR 
+#define FM_SWPR1        FM_SWPR
+
+#define FM_WPXS		0x30		/* r/w the write ptr. for synchr. qu.*/
+#define FM_WPXA0	0x31		/* r/w the write ptr. for asyn. qu.0 */
+#define FM_WPXA1	0x32		/* r/w the write ptr. for asyn. qu.1 */
+#define FM_WPXA2	0x33		/* r/w the write ptr. for asyn. qu.2 */
+#define FM_SWPXS	0x34		/* r/w the shadow wr.-ptr. for syn.q.*/
+#define FM_SWPXA0	0x35		/* r/w the shad. wr.-ptr. for asyn.q0*/
+#define FM_SWPXA1	0x36		/* r/w the shad. wr.-ptr. for asyn.q1*/
+#define FM_SWPXA2	0x37		/* r/w the shad. wr.-ptr. for asyn.q2*/
+#define FM_RPXS		0x38		/* r/w the read ptr. for synchr. qu. */
+#define FM_RPXA0	0x39		/* r/w the read ptr. for asyn. qu. 0 */
+#define FM_RPXA1	0x3a		/* r/w the read ptr. for asyn. qu. 1 */
+#define FM_RPXA2	0x3b		/* r/w the read ptr. for asyn. qu. 2 */
+#define FM_MARR		0x3c		/* r/w the memory read addr register */
+#define FM_MARW		0x3d		/* r/w the memory write addr register*/
+#define FM_MDRU		0x3e		/* r/w upper 16-bit of mem. data reg */
+#define FM_MDRL		0x3f		/* r/w lower 16-bit of mem. data reg */
+
+/* following instructions relate to MAC counters and timer */
+#define FM_TMSYNC	0x40		/* r/w upper 16 bits of TMSYNC timer */
+#define FM_FCNTR	0x41		/* r/w the 16-bit frame counter */
+#define FM_LCNTR	0x42		/* r/w the 16-bit lost counter */
+#define FM_ECNTR	0x43		/* r/w the 16-bit error counter */
+
+/* Supernet 3:	extensions to old register block */
+#define	FM_FSCNTR	0x44		/* r/? Frame Strip Counter */
+#define	FM_FRSELREG	0x45		/* r/w Frame Selection Register */
+
+/* Supernet 3:	extensions for 2. receive queue etc. */
+#define	FM_MDREG3	0x60		/* r/w Mode Register 3 */
+#define	FM_ST3U		0x61		/* read upper 16-bit of status reg 3 */
+#define	FM_ST3L		0x62		/* read lower 16-bit of status reg 3 */
+#define	FM_IMSK3U	0x63		/* r/w upper 16-bit of IMSK reg 3 */
+#define	FM_IMSK3L	0x64		/* r/w lower 16-bit of IMSK reg 3 */
+#define	FM_IVR		0x65		/* read Interrupt Vector register */
+#define	FM_IMR		0x66		/* r/w Interrupt mask register */
+/* 0x67	Hidden */
+#define	FM_RPR2		0x68		/* r/w the read ptr. for rec. qu. 2 */
+#define	FM_WPR2		0x69		/* r/w the write ptr. for rec. qu. 2 */
+#define	FM_SWPR2	0x6a		/* r/w the shadow wptr. for rec. q. 2 */
+#define	FM_EARV2	0x6b		/* r/w end addr of rec. qu. 2 */
+#define	FM_UNLCKDLY	0x6c		/* r/w Auto Unlock Delay register */
+					/* Bit 15-8: RECV2 unlock threshold */
+					/* Bit  7-0: RECV1 unlock threshold */
+/* 0x6f-0x73	Hidden */
+#define	FM_LTDPA1	0x79		/* r/w Last Trans desc ptr for A1 qu. */
+/* 0x80-0x9a	PLCS registers of built-in PLCS  (Supernet 3 only) */
+
+/* Supernet 3: Adderss Filter Registers */
+#define	FM_AFCMD	0xb0		/* r/w Address Filter Command Reg */
+#define	FM_AFSTAT	0xb2		/* r/w Address Filter Status Reg */
+#define	FM_AFBIST	0xb4		/* r/w Address Filter BIST signature */
+#define	FM_AFCOMP2	0xb6		/* r/w Address Filter Comparand 2 */
+#define	FM_AFCOMP1	0xb8		/* r/w Address Filter Comparand 1 */
+#define	FM_AFCOMP0	0xba		/* r/w Address Filter Comparand 0 */
+#define	FM_AFMASK2	0xbc		/* r/w Address Filter Mask 2 */
+#define	FM_AFMASK1	0xbe		/* r/w Address Filter Mask 1 */
+#define	FM_AFMASK0	0xc0		/* r/w Address Filter Mask 0 */
+#define	FM_AFPERS	0xc2		/* r/w Address Filter Personality Reg */
+
+/* Supernet 3: Orion (PDX?) Registers */
+#define	FM_ORBIST	0xd0		/* r/w Orion BIST signature */
+#define	FM_ORSTAT	0xd2		/* r/w Orion Status Register */
+
+
+/*
+ * Mode Register 1 (MDREG1)
+ */
+#define FM_RES0		0x0001		/* reserved */
+					/* SN3: other definition */
+#define	FM_XMTINH_HOLD	0x0002		/* transmit-inhibit/hold bit */
+					/* SN3: other definition */
+#define	FM_HOFLXI	0x0003		/* SN3: Hold / Flush / Inhibit */
+#define	FM_FULL_HALF	0x0004		/* full-duplex/half-duplex bit */
+#define	FM_LOCKTX	0x0008		/* lock-transmit-asynchr.-queues bit */
+#define FM_EXGPA0	0x0010		/* extended-group-addressing bit 0 */
+#define FM_EXGPA1	0x0020		/* extended-group-addressing bit 1 */
+#define FM_DISCRY	0x0040		/* disable-carry bit */
+					/* SN3: reserved */
+#define FM_SELRA	0x0080		/* select input from PHY (1=RA,0=RB) */
+
+#define FM_ADDET	0x0700		/* address detection */
+#define FM_MDAMA	(0<<8)		/* address detection : DA = MA */
+#define FM_MDASAMA	(1<<8)		/* address detection : DA=MA||SA=MA */
+#define	FM_MRNNSAFNMA	(2<<8)		/* rec. non-NSA frames DA=MA&&SA!=MA */
+#define	FM_MRNNSAF	(3<<8)		/* rec. non-NSA frames DA = MA */
+#define	FM_MDISRCV	(4<<8)		/* disable receive function */
+#define	FM_MRES0	(5<<8)		/* reserve */
+#define	FM_MLIMPROM	(6<<8)		/* limited-promiscuous mode */
+#define FM_MPROMISCOUS	(7<<8)		/* address detection : promiscuous */
+
+#define FM_SELSA	0x0800		/* select-short-address bit */
+
+#define FM_MMODE	0x7000		/* mode select */
+#define FM_MINIT	(0<<12)		/* initialize */
+#define FM_MMEMACT	(1<<12)		/* memory activate */
+#define FM_MONLINESP	(2<<12)		/* on-line special */
+#define FM_MONLINE	(3<<12)		/* on-line (FDDI operational mode) */
+#define FM_MILOOP	(4<<12)		/* internal loopback */
+#define FM_MRES1	(5<<12)		/* reserved */
+#define FM_MRES2	(6<<12)		/* reserved */
+#define FM_MELOOP	(7<<12)		/* external loopback */
+
+#define	FM_SNGLFRM	0x8000		/* single-frame-receive mode */
+					/* SN3: reserved */
+
+#define	MDR1INIT	(FM_MINIT | FM_MDAMA)
+
+/*
+ * Mode Register 2 (MDREG2)
+ */
+#define	FM_AFULL	0x000f		/* 4-bit value (empty loc.in txqueue)*/
+#define	FM_RCVERR	0x0010		/* rec.-errored-frames bit */
+#define	FM_SYMCTL	0x0020		/* sysmbol-control bit */
+					/* SN3: reserved */
+#define	FM_SYNPRQ	0x0040		/* synchron.-NP-DMA-request bit */
+#define	FM_ENNPRQ	0x0080		/* enable-NP-DMA-request bit */
+#define	FM_ENHSRQ	0x0100		/* enable-host-request bit */
+#define	FM_RXFBB01	0x0600		/* rec. frame byte boundary bit0 & 1 */
+#define	FM_LSB		0x0800		/* determ. ordering of bytes in buffer*/
+#define	FM_PARITY	0x1000		/* 1 = even, 0 = odd */
+#define	FM_CHKPAR	0x2000		/* 1 = parity of 32-bit buffer BD-bus*/
+#define	FM_STRPFCS	0x4000		/* 1 = strips FCS field of rec.frame */
+#define	FM_BMMODE	0x8000		/* Buffer-Memory-Mode (1 = tag mode) */
+					/* SN3: 1 = tag, 0 = modified tag */
+
+/*
+ * Status Register 1, Upper 16 Bits (ST1U)
+ */
+#define FM_STEFRMS	0x0001		/* transmit end of frame: synchr. qu.*/
+#define FM_STEFRMA0	0x0002		/* transmit end of frame: asyn. qu.0 */
+#define FM_STEFRMA1	0x0004		/* transmit end of frame: asyn. qu.1 */
+#define FM_STEFRMA2	0x0008		/* transmit end of frame: asyn. qu.2 */
+					/* SN3: reserved */
+#define FM_STECFRMS	0x0010		/* transmit end of chain of syn. qu. */
+					/* SN3: reserved */
+#define FM_STECFRMA0	0x0020		/* transmit end of chain of asyn. q0 */
+					/* SN3: reserved */
+#define FM_STECFRMA1	0x0040		/* transmit end of chain of asyn. q1 */
+					/* SN3: STECMDA1 */
+#define FM_STECMDA1	0x0040		/* SN3: 'no description' */
+#define FM_STECFRMA2	0x0080		/* transmit end of chain of asyn. q2 */
+					/* SN3: reserved */
+#define	FM_STEXDONS	0x0100		/* transmit until XDONE in syn. qu. */
+#define	FM_STBFLA	0x0200		/* asynchr.-queue trans. buffer full */
+#define	FM_STBFLS	0x0400		/* synchr.-queue transm. buffer full */
+#define	FM_STXABRS	0x0800		/* synchr. queue transmit-abort */
+#define	FM_STXABRA0	0x1000		/* asynchr. queue 0 transmit-abort */
+#define	FM_STXABRA1	0x2000		/* asynchr. queue 1 transmit-abort */
+#define	FM_STXABRA2	0x4000		/* asynchr. queue 2 transmit-abort */
+					/* SN3: reserved */
+#define	FM_SXMTABT	0x8000		/* transmit abort */
+
+/*
+ * Status Register 1, Lower 16 Bits (ST1L)
+ */
+#define FM_SQLCKS	0x0001		/* queue lock for synchr. queue */
+#define FM_SQLCKA0	0x0002		/* queue lock for asynchr. queue 0 */
+#define FM_SQLCKA1	0x0004		/* queue lock for asynchr. queue 1 */
+#define FM_SQLCKA2	0x0008		/* queue lock for asynchr. queue 2 */
+					/* SN3: reserved */
+#define FM_STXINFLS	0x0010		/* transmit instruction full: syn. */
+					/* SN3: reserved */
+#define FM_STXINFLA0	0x0020		/* transmit instruction full: asyn.0 */
+					/* SN3: reserved */
+#define FM_STXINFLA1	0x0040		/* transmit instruction full: asyn.1 */
+					/* SN3: reserved */
+#define FM_STXINFLA2	0x0080		/* transmit instruction full: asyn.2 */
+					/* SN3: reserved */
+#define FM_SPCEPDS	0x0100		/* parity/coding error: syn. queue */
+#define FM_SPCEPDA0	0x0200		/* parity/coding error: asyn. queue0 */
+#define FM_SPCEPDA1	0x0400		/* parity/coding error: asyn. queue1 */
+#define FM_SPCEPDA2	0x0800		/* parity/coding error: asyn. queue2 */
+					/* SN3: reserved */
+#define FM_STBURS	0x1000		/* transmit buffer underrun: syn. q. */
+#define FM_STBURA0	0x2000		/* transmit buffer underrun: asyn.0 */
+#define FM_STBURA1	0x4000		/* transmit buffer underrun: asyn.1 */
+#define FM_STBURA2	0x8000		/* transmit buffer underrun: asyn.2 */
+					/* SN3: reserved */
+
+/*
+ * Status Register 2, Upper 16 Bits (ST2U)
+ */
+#define FM_SOTRBEC	0x0001		/* other beacon received */
+#define FM_SMYBEC	0x0002		/* my beacon received */
+#define FM_SBEC		0x0004		/* beacon state entered */
+#define FM_SLOCLM	0x0008		/* low claim received */
+#define FM_SHICLM	0x0010		/* high claim received */
+#define FM_SMYCLM	0x0020		/* my claim received */
+#define FM_SCLM		0x0040		/* claim state entered */
+#define FM_SERRSF	0x0080		/* error in special frame */
+#define FM_SNFSLD	0x0100		/* NP and FORMAC+ simultaneous load */
+#define FM_SRFRCTOV	0x0200		/* receive frame counter overflow */
+					/* SN3: reserved */
+#define FM_SRCVFRM	0x0400		/* receive frame */
+					/* SN3: reserved */
+#define FM_SRCVOVR	0x0800		/* receive FIFO overflow */
+#define FM_SRBFL	0x1000		/* receive buffer full */
+#define FM_SRABT	0x2000		/* receive abort */
+#define FM_SRBMT	0x4000		/* receive buffer empty */
+#define FM_SRCOMP	0x8000		/* receive complete. Nontag mode */
+
+/*
+ * Status Register 2, Lower 16 Bits (ST2L)
+ * Attention: SN3 docu shows these bits the other way around
+ */
+#define FM_SRES0	0x0001		/* reserved */
+#define FM_SESTRIPTK	0x0001		/* SN3: 'no description' */
+#define FM_STRTEXR	0x0002		/* TRT expired in claim | beacon st. */
+#define FM_SDUPCLM	0x0004		/* duplicate claim received */
+#define FM_SSIFG	0x0008		/* short interframe gap */
+#define FM_SFRMCTR	0x0010		/* frame counter overflow */
+#define FM_SERRCTR	0x0020		/* error counter overflow */
+#define FM_SLSTCTR	0x0040		/* lost counter overflow */
+#define FM_SPHINV	0x0080		/* PHY invalid */
+#define FM_SADET	0x0100		/* address detect */
+#define FM_SMISFRM	0x0200		/* missed frame */
+#define FM_STRTEXP	0x0400		/* TRT expired and late count > 0 */
+#define FM_STVXEXP	0x0800		/* TVX expired */
+#define FM_STKISS	0x1000		/* token issued */
+#define FM_STKERR	0x2000		/* token error */
+#define FM_SMULTDA	0x4000		/* multiple destination address */
+#define FM_SRNGOP	0x8000		/* ring operational */
+
+/*
+ * Supernet 3:
+ * Status Register 3, Upper 16 Bits (ST3U)
+ */
+#define	FM_SRQUNLCK1	0x0001		/* receive queue unlocked queue 1 */
+#define	FM_SRQUNLCK2	0x0002		/* receive queue unlocked queue 2 */
+#define	FM_SRPERRQ1	0x0004		/* receive parity error rx queue 1 */
+#define	FM_SRPERRQ2	0x0008		/* receive parity error rx queue 2 */
+					/* Bit 4-10: reserved */
+#define	FM_SRCVOVR2	0x0800		/* receive FIFO overfull rx queue 2 */
+#define	FM_SRBFL2	0x1000		/* receive buffer full rx queue 2 */
+#define	FM_SRABT2	0x2000		/* receive abort rx queue 2 */
+#define	FM_SRBMT2	0x4000		/* receive buf empty rx queue 2 */
+#define	FM_SRCOMP2	0x8000		/* receive comp rx queue 2 */
+
+/*
+ * Supernet 3:
+ * Status Register 3, Lower 16 Bits (ST3L)
+ */
+#define	FM_AF_BIST_DONE		0x0001	/* Address Filter BIST is done */
+#define	FM_PLC_BIST_DONE	0x0002	/* internal PLC Bist is done */
+#define	FM_PDX_BIST_DONE	0x0004	/* PDX BIST is done */
+					/* Bit  3: reserved */
+#define	FM_SICAMDAMAT		0x0010	/* Status internal CAM DA match */
+#define	FM_SICAMDAXACT		0x0020	/* Status internal CAM DA exact match */
+#define	FM_SICAMSAMAT		0x0040	/* Status internal CAM SA match */
+#define	FM_SICAMSAXACT		0x0080	/* Status internal CAM SA exact match */
+
+/*
+ * MAC State-Machine Register FM_STMCHN
+ */
+#define	FM_MDRTAG	0x0004		/* tag bit of long word read */
+#define	FM_SNPPND	0x0008		/* r/w from buffer mem. is pending */
+#define	FM_TXSTAT	0x0070		/* transmitter state machine state */
+#define	FM_RCSTAT	0x0380		/* receiver state machine state */
+#define	FM_TM01		0x0c00		/* indicate token mode */
+#define	FM_SIM		0x1000		/* indicate send immediate-mode */
+#define	FM_REV		0xe000		/* FORMAC Plus revision number */
+
+/*
+ * Supernet 3
+ * Mode Register 3
+ */
+#define	FM_MENRS	0x0001		/* Ena enhanced rec status encoding */
+#define	FM_MENXS	0x0002		/* Ena enhanced xmit status encoding */
+#define	FM_MENXCT	0x0004		/* Ena EXACT/INEXACT matching */
+#define	FM_MENAFULL	0x0008		/* Ena enh QCTRL encoding for AFULL */
+#define	FM_MEIND	0x0030		/* Ena enh A,C indicator settings */
+#define	FM_MENQCTRL	0x0040		/* Ena enh QCTRL encoding */
+#define	FM_MENRQAUNLCK	0x0080		/* Ena rec q auto unlock */
+#define	FM_MENDAS	0x0100		/* Ena DAS connections by cntr MUX */
+#define	FM_MENPLCCST	0x0200		/* Ena Counter Segm test in PLC blck */
+#define	FM_MENSGLINT	0x0400		/* Ena Vectored Interrupt reading */
+#define	FM_MENDRCV	0x0800		/* Ena dual receive queue operation */
+#define	FM_MENFCLOC	0x3000		/* Ena FC location within frm data */
+#define	FM_MENTRCMD	0x4000		/* Ena ASYNC1 xmit only after command */
+#define	FM_MENTDLPBK	0x8000		/* Ena TDAT to RDAT lkoopback */
+
+/*
+ * Supernet 3
+ * Frame Selection Register
+ */
+#define	FM_RECV1	0x000f		/* options for receive queue 1 */
+#define	FM_RCV1_ALL	(0<<0)		/* receive all frames */
+#define	FM_RCV1_LLC	(1<<0)		/* rec all LLC frames */
+#define	FM_RCV1_SMT	(2<<0)		/* rec all SMT frames */
+#define	FM_RCV1_NSMT	(3<<0)		/* rec non-SMT frames */
+#define	FM_RCV1_IMP	(4<<0)		/* rec Implementor frames */
+#define	FM_RCV1_MAC	(5<<0)		/* rec all MAC frames */
+#define	FM_RCV1_SLLC	(6<<0)		/* rec all sync LLC frames */
+#define	FM_RCV1_ALLC	(7<<0)		/* rec all async LLC frames */
+#define	FM_RCV1_VOID	(8<<0)		/* rec all void frames */
+#define	FM_RCV1_ALSMT	(9<<0)		/* rec all async LLC & SMT frames */
+#define	FM_RECV2	0x00f0		/* options for receive queue 2 */
+#define	FM_RCV2_ALL	(0<<4)		/* receive all other frames */
+#define	FM_RCV2_LLC	(1<<4)		/* rec all LLC frames */
+#define	FM_RCV2_SMT	(2<<4)		/* rec all SMT frames */
+#define	FM_RCV2_NSMT	(3<<4)		/* rec non-SMT frames */
+#define	FM_RCV2_IMP	(4<<4)		/* rec Implementor frames */
+#define	FM_RCV2_MAC	(5<<4)		/* rec all MAC frames */
+#define	FM_RCV2_SLLC	(6<<4)		/* rec all sync LLC frames */
+#define	FM_RCV2_ALLC	(7<<4)		/* rec all async LLC frames */
+#define	FM_RCV2_VOID	(8<<4)		/* rec all void frames */
+#define	FM_RCV2_ALSMT	(9<<4)		/* rec all async LLC & SMT frames */
+#define	FM_ENXMTADSWAP	0x4000		/* enh rec addr swap (phys -> can) */
+#define	FM_ENRCVADSWAP	0x8000		/* enh tx addr swap (can -> phys) */
+
+/*
+ * Supernet 3:
+ * Address Filter Command Register (AFCMD)
+ */
+#define	FM_INST		0x0007		/* Address Filter Operation */
+#define FM_IINV_CAM	(0<<0)		/* Invalidate CAM */
+#define FM_IWRITE_CAM	(1<<0)		/* Write CAM */
+#define FM_IREAD_CAM	(2<<0)		/* Read CAM */
+#define FM_IRUN_BIST	(3<<0)		/* Run BIST */
+#define FM_IFIND	(4<<0)		/* Find */
+#define FM_IINV		(5<<0)		/* Invalidate */
+#define FM_ISKIP	(6<<0)		/* Skip */
+#define FM_ICL_SKIP	(7<<0)		/* Clear all SKIP bits */
+
+/*
+ * Supernet 3:
+ * Address Filter Status Register (AFSTAT)
+ */
+					/* Bit  0-4: reserved */
+#define	FM_REV_NO	0x00e0		/* Revision Number of Address Filter */
+#define	FM_BIST_DONE	0x0100		/* BIST complete */
+#define	FM_EMPTY	0x0200		/* CAM empty */
+#define	FM_ERROR	0x0400		/* Error (improper operation) */
+#define	FM_MULT		0x0800		/* Multiple Match */
+#define	FM_EXACT	0x1000		/* Exact Match */
+#define	FM_FOUND	0x2000		/* Comparand found in CAM */
+#define	FM_FULL		0x4000		/* CAM full */
+#define	FM_DONE		0x8000		/* DONE indicator */
+
+/*
+ * Supernet 3:
+ * BIST Signature Register (AFBIST)
+ */
+#define	AF_BIST_SIGNAT	0x0553		/* Address Filter BIST Signature */
+
+/*
+ * Supernet 3:
+ * Personality Register (AFPERS)
+ */
+#define	FM_VALID	0x0001		/* CAM Entry Valid */
+#define	FM_DA		0x0002		/* Destination Address */
+#define	FM_DAX		0x0004		/* Destination Address Exact */
+#define	FM_SA		0x0008		/* Source Address */
+#define	FM_SAX		0x0010		/* Source Address Exact */
+#define	FM_SKIP		0x0020		/* Skip this entry */
+
+/*
+ * instruction set for command register 1 (NPADDR6-0 = 0x00)
+ */
+#define FM_IRESET	0x01		/* software reset */
+#define FM_IRMEMWI	0x02		/* load Memory Data Reg., inc MARR */
+#define FM_IRMEMWO	0x03		/* load MDR from buffer memory, n.i. */
+#define FM_IIL		0x04		/* idle/listen */
+#define FM_ICL		0x05		/* claim/listen */
+#define FM_IBL		0x06		/* beacon/listen */
+#define FM_ILTVX	0x07		/* load TVX timer from TVX reg */
+#define FM_INRTM	0x08		/* nonrestricted token mode */
+#define FM_IENTM	0x09		/* enter nonrestricted token mode */
+#define FM_IERTM	0x0a		/* enter restricted token mode */
+#define FM_IRTM		0x0b		/* restricted token mode */
+#define FM_ISURT	0x0c		/* send unrestricted token */
+#define FM_ISRT		0x0d		/* send restricted token */
+#define FM_ISIM		0x0e		/* enter send-immediate mode */
+#define FM_IESIM	0x0f		/* exit send-immediate mode */
+#define FM_ICLLS	0x11		/* clear synchronous queue lock */
+#define FM_ICLLA0	0x12		/* clear asynchronous queue 0 lock */
+#define FM_ICLLA1	0x14		/* clear asynchronous queue 1 lock */
+#define FM_ICLLA2	0x18		/* clear asynchronous queue 2 lock */
+					/* SN3: reserved */
+#define FM_ICLLR	0x20		/* clear receive queue (SN3:1) lock */
+#define FM_ICLLR2	0x21		/* SN3: clear receive queue 2 lock */
+#define FM_ITRXBUS	0x22		/* SN3: Tristate X-Bus (SAS only) */
+#define FM_IDRXBUS	0x23		/* SN3: drive X-Bus */
+#define FM_ICLLAL	0x3f		/* clear all queue locks */
+
+/*
+ * instruction set for command register 2 (NPADDR6-0 = 0x01)
+ */
+#define FM_ITRS		0x01		/* transmit synchronous queue */
+					/* SN3: reserved */
+#define FM_ITRA0	0x02		/* transmit asynchronous queue 0 */
+					/* SN3: reserved */
+#define FM_ITRA1	0x04		/* transmit asynchronous queue 1 */
+					/* SN3: reserved */
+#define FM_ITRA2	0x08		/* transmit asynchronous queue 2 */
+					/* SN3: reserved */
+#define FM_IACTR	0x10		/* abort current transmit activity */
+#define FM_IRSTQ	0x20		/* reset transmit queues */
+#define FM_ISTTB	0x30		/* set tag bit */
+#define FM_IERSF	0x40		/* enable receive single frame */
+					/* SN3: reserved */
+#define	FM_ITR		0x50		/* SN3: Transmit Command */
+
+
+/*
+ *	defines for PLC (Am79C864)
+ */
+
+/*
+ *  PLC read/write (r/w) registers
+ */
+#define PL_CNTRL_A	0x00		/* control register A (r/w) */
+#define PL_CNTRL_B	0x01		/* control register B (r/w) */
+#define PL_INTR_MASK	0x02		/* interrupt mask (r/w) */
+#define PL_XMIT_VECTOR	0x03		/* transmit vector register (r/w) */
+#define PL_VECTOR_LEN	0x04		/* transmit vector length (r/w) */
+#define PL_LE_THRESHOLD	0x05		/* link error event threshold (r/w) */
+#define PL_C_MIN	0x06		/* minimum connect state time (r/w) */
+#define PL_TL_MIN	0x07		/* min. line state transmit t. (r/w) */
+#define PL_TB_MIN	0x08		/* minimum break time (r/w) */
+#define PL_T_OUT	0x09		/* signal timeout (r/w) */
+#define PL_CNTRL_C	0x0a		/* control register C (r/w) */
+#define PL_LC_LENGTH	0x0b		/* link confidence test time (r/w) */
+#define PL_T_SCRUB	0x0c		/* scrub time = MAC TVX (r/w) */
+#define PL_NS_MAX	0x0d		/* max. noise time before break (r/w)*/
+#define PL_TPC_LOAD_V	0x0e		/* TPC timer load value (write only) */
+#define PL_TNE_LOAD_V	0x0f		/* TNE timer load value (write only) */
+#define PL_STATUS_A	0x10		/* status register A (read only) */
+#define PL_STATUS_B	0x11		/* status register B (read only) */
+#define PL_TPC		0x12		/* timer for PCM (ro) [20.48 us] */
+#define PL_TNE		0x13		/* time of noise event [0.32 us] */
+#define PL_CLK_DIV	0x14		/* TNE clock divider (read only) */
+#define PL_BIST_SIGNAT	0x15		/* built in self test signature (ro)*/
+#define PL_RCV_VECTOR	0x16		/* receive vector reg. (read only) */
+#define PL_INTR_EVENT	0x17		/* interrupt event reg. (read only) */
+#define PL_VIOL_SYM_CTR	0x18		/* violation symbol count. (read o) */
+#define PL_MIN_IDLE_CTR	0x19		/* minimum idle counter (read only) */
+#define PL_LINK_ERR_CTR	0x1a		/* link error event ctr.(read only) */
+#ifdef	MOT_ELM
+#define	PL_T_FOT_ASS	0x1e		/* FOTOFF Assert Timer */
+#define	PL_T_FOT_DEASS	0x1f		/* FOTOFF Deassert Timer */
+#endif	/* MOT_ELM */
+
+#ifdef	MOT_ELM
+/*
+ * Special Quad-Elm Registers.
+ * A Quad-ELM consists of for ELMs and these additional registers.
+ */
+#define	QELM_XBAR_W	0x80		/* Crossbar Control ELM W */
+#define	QELM_XBAR_X	0x81		/* Crossbar Control ELM X */
+#define	QELM_XBAR_Y	0x82		/* Crossbar Control ELM Y */
+#define	QELM_XBAR_Z	0x83		/* Crossbar Control ELM Z */
+#define	QELM_XBAR_P	0x84		/* Crossbar Control Bus P */
+#define	QELM_XBAR_S	0x85		/* Crossbar Control Bus S */
+#define	QELM_XBAR_R	0x86		/* Crossbar Control Bus R */
+#define	QELM_WR_XBAR	0x87		/* Write the Crossbar now (write) */
+#define	QELM_CTR_W	0x88		/* Counter W */
+#define	QELM_CTR_X	0x89		/* Counter X */
+#define	QELM_CTR_Y	0x8a		/* Counter Y */
+#define	QELM_CTR_Z	0x8b		/* Counter Z */
+#define	QELM_INT_MASK	0x8c		/* Interrupt mask register */
+#define	QELM_INT_DATA	0x8d		/* Interrupt data (event) register */
+#define	QELM_ELMB	0x00		/* Elm base */
+#define	QELM_ELM_SIZE	0x20		/* ELM size */
+#endif	/* MOT_ELM */
+/*
+ * PLC control register A (PL_CNTRL_A: log. addr. 0x00)
+ * It is used for timer configuration, specification of PCM MAINT state option,
+ * counter interrupt frequency, PLC data path config. and Built In Self Test.
+ */
+#define	PL_RUN_BIST	0x0001		/* begin running its Built In Self T.*/
+#define	PL_RF_DISABLE	0x0002		/* disable the Repeat Filter state m.*/
+#define	PL_SC_REM_LOOP	0x0004		/* remote loopback path */
+#define	PL_SC_BYPASS	0x0008		/* by providing a physical bypass */
+#define	PL_LM_LOC_LOOP	0x0010		/* loop path just after elastic buff.*/
+#define	PL_EB_LOC_LOOP	0x0020		/* loop path just prior to PDT/PDR IF*/
+#define	PL_FOT_OFF	0x0040		/* assertion of /FOTOFF pin of PLC */
+#define	PL_LOOPBACK	0x0080		/* it cause the /LPBCK pin ass. low */
+#define	PL_MINI_CTR_INT 0x0100		/* partially contr. when bit is ass. */
+#define	PL_VSYM_CTR_INT	0x0200		/* controls when int bit is asserted */
+#define	PL_ENA_PAR_CHK	0x0400		/* enable parity check */
+#define	PL_REQ_SCRUB	0x0800		/* limited access to scrub capability*/
+#define	PL_TPC_16BIT	0x1000		/* causes the TPC as a 16 bit timer */
+#define	PL_TNE_16BIT	0x2000		/* causes the TNE as a 16 bit timer */
+#define	PL_NOISE_TIMER	0x4000		/* allows the noise timing function */
+
+/*
+ * PLC control register B (PL_CNTRL_B: log. addr. 0x01)
+ * It contains signals and requeste to direct the process of PCM and it is also
+ * used to control the Line State Match interrupt.
+ */
+#define	PL_PCM_CNTRL	0x0003		/* control PCM state machine */
+#define	PL_PCM_NAF	(0)		/* state is not affected */
+#define	PL_PCM_START	(1)		/* goes to the BREAK state */
+#define	PL_PCM_TRACE	(2)		/* goes to the TRACE state */
+#define	PL_PCM_STOP	(3)		/* goes to the OFF state */
+
+#define	PL_MAINT	0x0004		/* if OFF state --> MAINT state */
+#define	PL_LONG		0x0008		/* perf. a long Link Confid.Test(LCT)*/
+#define	PL_PC_JOIN	0x0010		/* if NEXT state --> JOIN state */
+
+#define	PL_PC_LOOP	0x0060		/* loopback used in the LCT */
+#define	PL_NOLCT	(0<<5)		/* no LCT is performed */
+#define	PL_TPDR		(1<<5)		/* PCM asserts transmit PDR */
+#define	PL_TIDLE	(2<<5)		/* PCM asserts transmit idle */
+#define	PL_RLBP		(3<<5)		/* trans. PDR & remote loopb. path */
+
+#define	PL_CLASS_S	0x0080		/* signif. that single att. station */
+
+#define	PL_MAINT_LS	0x0700		/* line state while in the MAINT st. */
+#define	PL_M_QUI0	(0<<8)		/* transmit QUIET line state */
+#define	PL_M_IDLE	(1<<8)		/* transmit IDLE line state */
+#define	PL_M_HALT	(2<<8)		/* transmit HALT line state */
+#define	PL_M_MASTR	(3<<8)		/* transmit MASTER line state */
+#define	PL_M_QUI1	(4<<8)		/* transmit QUIET line state */
+#define	PL_M_QUI2	(5<<8)		/* transmit QUIET line state */
+#define	PL_M_TPDR	(6<<8)		/* tr. PHY_DATA requ.-symbol is tr.ed*/
+#define	PL_M_QUI3	(7<<8)		/* transmit QUIET line state */
+
+#define	PL_MATCH_LS	0x7800		/* line state to be comp. with curr.*/
+#define	PL_I_ANY	(0<<11)		/* Int. on any change in *_LINE_ST */
+#define	PL_I_IDLE	(1<<11)		/* Interrupt on IDLE line state */
+#define	PL_I_HALT	(2<<11)		/* Interrupt on HALT line state */
+#define	PL_I_MASTR	(4<<11)		/* Interrupt on MASTER line state */
+#define	PL_I_QUIET	(8<<11)		/* Interrupt on QUIET line state */
+
+#define	PL_CONFIG_CNTRL	0x8000		/* control over scrub, byp. & loopb.*/
+
+/*
+ * PLC control register C (PL_CNTRL_C: log. addr. 0x0a)
+ * It contains the scrambling control registers (PLC-S only)
+ */
+#define PL_C_CIPHER_ENABLE	(1<<0)	/* enable scrambler */
+#define PL_C_CIPHER_LPBCK	(1<<1)	/* loopback scrambler */
+#define PL_C_SDOFF_ENABLE	(1<<6)	/* enable SDOFF timer */
+#define PL_C_SDON_ENABLE	(1<<7)	/* enable SDON timer */
+#ifdef	MOT_ELM
+#define PL_C_FOTOFF_CTRL	(3<<2)	/* FOTOFF timer control */
+#define PL_C_FOTOFF_TIM		(0<<2)	/* FOTOFF use timer for (de)-assert */
+#define PL_C_FOTOFF_INA		(2<<2)	/* FOTOFF forced inactive */
+#define PL_C_FOTOFF_ACT		(3<<2)	/* FOTOFF forced active */
+#define PL_C_FOTOFF_SRCE	(1<<4)	/* FOTOFF source is PCM state != OFF */
+#define	PL_C_RXDATA_EN		(1<<5)	/* Rec scr data forced to 0 */
+#define	PL_C_SDNRZEN		(1<<8)	/* Monitor rec descr. data for act */
+#else	/* nMOT_ELM */
+#define PL_C_FOTOFF_CTRL	(3<<8)	/* FOTOFF timer control */
+#define PL_C_FOTOFF_0		(0<<8)	/* timer off */
+#define PL_C_FOTOFF_30		(1<<8)	/* 30uS */
+#define PL_C_FOTOFF_50		(2<<8)	/* 50uS */
+#define PL_C_FOTOFF_NEVER	(3<<8)	/* never */
+#define PL_C_SDON_TIMER		(3<<10)	/* SDON timer control */
+#define PL_C_SDON_084		(0<<10)	/* 0.84 uS */
+#define PL_C_SDON_132		(1<<10)	/* 1.32 uS */
+#define PL_C_SDON_252		(2<<10)	/* 2.52 uS */
+#define PL_C_SDON_512		(3<<10)	/* 5.12 uS */
+#define PL_C_SOFF_TIMER		(3<<12)	/* SDOFF timer control */
+#define PL_C_SOFF_076		(0<<12)	/* 0.76 uS */
+#define PL_C_SOFF_132		(1<<12)	/* 1.32 uS */
+#define PL_C_SOFF_252		(2<<12)	/* 2.52 uS */
+#define PL_C_SOFF_512		(3<<12)	/* 5.12 uS */
+#define PL_C_TSEL		(3<<14)	/* scrambler path select */
+#endif	/* nMOT_ELM */
+
+/*
+ * PLC status register A (PL_STATUS_A: log. addr. 0x10)
+ * It is used to report status information to the Node Processor about the 
+ * Line State Machine (LSM).
+ */
+#ifdef	MOT_ELM
+#define PLC_INT_MASK	0xc000		/* ELM integration bits in status A */
+#define PLC_INT_C	0x0000		/* ELM Revision Band C */
+#define PLC_INT_CAMEL	0x4000		/* ELM integrated into CAMEL */
+#define PLC_INT_QE	0x8000		/* ELM integrated into Quad ELM */
+#define PLC_REV_MASK	0x3800		/* revision bits in status A */
+#define PLC_REVISION_B	0x0000		/* rev bits for ELM Rev B */
+#define PLC_REVISION_QA	0x0800		/* rev bits for ELM core in QELM-A */
+#else	/* nMOT_ELM */
+#define PLC_REV_MASK	0xf800		/* revision bits in status A */
+#define PLC_REVISION_A	0x0000		/* revision bits for PLC */
+#define PLC_REVISION_S	0xf800		/* revision bits for PLC-S */
+#define PLC_REV_SN3	0x7800		/* revision bits for PLC-S in IFCP */
+#endif	/* nMOT_ELM */
+#define	PL_SYM_PR_CTR	0x0007		/* contains the LSM symbol pair Ctr. */
+#define	PL_UNKN_LINE_ST	0x0008		/* unknown line state bit from LSM */
+#define	PL_LSM_STATE	0x0010		/* state bit of LSM */
+
+#define	PL_LINE_ST	0x00e0		/* contains recogn. line state of LSM*/
+#define	PL_L_NLS	(0<<5)		/* noise line state */
+#define	PL_L_ALS	(1<<5)		/* activ line state */
+#define	PL_L_UND	(2<<5)		/* undefined */
+#define	PL_L_ILS4	(3<<5)		/* idle l. s. (after 4 idle symbols) */
+#define	PL_L_QLS	(4<<5)		/* quiet line state */
+#define	PL_L_MLS	(5<<5)		/* master line state */
+#define	PL_L_HLS	(6<<5)		/* halt line state */
+#define	PL_L_ILS16	(7<<5)		/* idle line state (after 16 idle s.)*/
+
+#define	PL_PREV_LINE_ST	0x0300		/* value of previous line state */
+#define	PL_P_QLS	(0<<8)		/* quiet line state */
+#define	PL_P_MLS	(1<<8)		/* master line state */
+#define	PL_P_HLS	(2<<8)		/* halt line state */
+#define	PL_P_ILS16	(3<<8)		/* idle line state (after 16 idle s.)*/
+
+#define	PL_SIGNAL_DET	0x0400		/* 1=that signal detect is deasserted*/
+
+
+/*
+ * PLC status register B (PL_STATUS_B: log. addr. 0x11)
+ * It contains signals and status from the repeat filter and PCM state machine.
+ */
+#define	PL_BREAK_REASON	0x0007		/* reason for PCM state mach.s to br.*/
+#define	PL_B_NOT	(0)		/* PCM SM has not gone to BREAK state*/
+#define	PL_B_PCS	(1)		/* PC_Start issued */
+#define	PL_B_TPC	(2)		/* TPC timer expired after T_OUT */
+#define	PL_B_TNE	(3)		/* TNE timer expired after NS_MAX */
+#define	PL_B_QLS	(4)		/* quit line state detected */
+#define	PL_B_ILS	(5)		/* idle line state detected */
+#define	PL_B_HLS	(6)		/* halt line state detected */
+
+#define	PL_TCF		0x0008		/* transmit code flag (start exec.) */
+#define	PL_RCF		0x0010		/* receive code flag (start exec.) */
+#define	PL_LSF		0x0020		/* line state flag (l.s. has been r.)*/
+#define	PL_PCM_SIGNAL	0x0040		/* indic. that XMIT_VECTOR hb.written*/
+
+#define	PL_PCM_STATE	0x0780		/* state bits of PCM state machine */
+#define	PL_PC0		(0<<7)		/* OFF	   - when /RST or PCM_CNTRL */
+#define	PL_PC1		(1<<7)		/* BREAK   - entry point in start PCM*/
+#define	PL_PC2		(2<<7)		/* TRACE   - to localize stuck Beacon*/
+#define	PL_PC3		(3<<7)		/* CONNECT - synchronize ends of conn*/
+#define	PL_PC4		(4<<7)		/* NEXT	   - to separate the signalng*/
+#define	PL_PC5		(5<<7)		/* SIGNAL  - PCM trans/rec. bit infos*/
+#define	PL_PC6		(6<<7)		/* JOIN	   - 1. state to activ conn. */
+#define	PL_PC7		(7<<7)		/* VERIFY  - 2. - " - (3. ACTIVE) */
+#define	PL_PC8		(8<<7)		/* ACTIVE  - PHY has been incorporated*/
+#define	PL_PC9		(9<<7)		/* MAINT   - for test purposes or so 
+					   that PCM op. completely in softw. */
+
+#define	PL_PCI_SCRUB	0x0800		/* scrubbing function is being exec. */
+
+#define	PL_PCI_STATE	0x3000		/* Physical Connect. Insertion SM */
+#define	PL_CI_REMV	(0<<12)		/* REMOVED */
+#define	PL_CI_ISCR	(1<<12)		/* INSERT_SCRUB */
+#define	PL_CI_RSCR	(2<<12)		/* REMOVE_SCRUB */
+#define	PL_CI_INS	(3<<12)		/* INSERTED */
+
+#define	PL_RF_STATE	0xc000		/* state bit of repeate filter SM */
+#define	PL_RF_REPT	(0<<14)		/* REPEAT */
+#define	PL_RF_IDLE	(1<<14)		/* IDLE */
+#define	PL_RF_HALT1	(2<<14)		/* HALT1 */
+#define	PL_RF_HALT2	(3<<14)		/* HALT2 */
+
+
+/*
+ * PLC interrupt event register (PL_INTR_EVENT: log. addr. 0x17)
+ * It is read only and is clearde whenever it is read!
+ * It is used by the PLC to report events to the node processor.
+ */
+#define	PL_PARITY_ERR	0x0001		/* p. error h.b.detected on TX9-0 inp*/
+#define	PL_LS_MATCH	0x0002		/* l.s.== l.s. PLC_CNTRL_B's MATCH_LS*/
+#define	PL_PCM_CODE	0x0004		/* transmit&receive | LCT complete */
+#define	PL_TRACE_PROP	0x0008		/* master l.s. while PCM ACTIV|TRACE */
+#define	PL_SELF_TEST	0x0010		/* QUIET|HALT while PCM in TRACE st. */
+#define	PL_PCM_BREAK	0x0020		/* PCM has entered the BREAK state */
+#define	PL_PCM_ENABLED	0x0040		/* asserted SC_JOIN, scrub. & ACTIV */
+#define	PL_TPC_EXPIRED	0x0080		/* TPC timer reached zero */
+#define	PL_TNE_EXPIRED	0x0100		/* TNE timer reached zero */
+#define	PL_EBUF_ERR	0x0200		/* elastic buff. det. over-|underflow*/
+#define	PL_PHYINV	0x0400		/* physical layer invalid signal */
+#define	PL_VSYM_CTR	0x0800		/* violation symbol counter has incr.*/
+#define	PL_MINI_CTR	0x1000		/* dep. on PLC_CNTRL_A's MINI_CTR_INT*/
+#define	PL_LE_CTR	0x2000		/* link error event counter */
+#define	PL_LSDO		0x4000		/* SDO input pin changed to a 1 */
+#define	PL_NP_ERR	0x8000		/* NP has requested to r/w an inv. r.*/
+
+/*
+ * The PLC interrupt mask register (PL_INTR_MASK: log. addr. 0x02) constr. is
+ * equal PL_INTR_EVENT register.
+ * For each set bit, the setting of corresponding bit generate an int to NP. 
+ */
+
+#ifdef	MOT_ELM
+/*
+ * Quad ELM Crosbar Control register values (QELM_XBAR_?)
+ */
+#define	QELM_XOUT_IDLE	0x0000		/* Idles/Passthrough */
+#define	QELM_XOUT_P	0x0001		/* Output to: Bus P */
+#define	QELM_XOUT_S	0x0002		/* Output to: Bus S */
+#define	QELM_XOUT_R	0x0003		/* Output to: Bus R */
+#define	QELM_XOUT_W	0x0004		/* Output to: ELM W */
+#define	QELM_XOUT_X	0x0005		/* Output to: ELM X */
+#define	QELM_XOUT_Y	0x0006		/* Output to: ELM Y */
+#define	QELM_XOUT_Z	0x0007		/* Output to: ELM Z */
+
+/*
+ * Quad ELM Interrupt data and event registers.
+ */
+#define	QELM_NP_ERR	(1<<15)		/* Node Processor Error */
+#define	QELM_COUNT_Z	(1<<7)		/* Counter Z Interrupt */
+#define	QELM_COUNT_Y	(1<<6)		/* Counter Y Interrupt */
+#define	QELM_COUNT_X	(1<<5)		/* Counter X Interrupt */
+#define	QELM_COUNT_W	(1<<4)		/* Counter W Interrupt */
+#define	QELM_ELM_Z	(1<<3)		/* ELM Z Interrupt */
+#define	QELM_ELM_Y	(1<<2)		/* ELM Y Interrupt */
+#define	QELM_ELM_X	(1<<1)		/* ELM X Interrupt */
+#define	QELM_ELM_W	(1<<0)		/* ELM W Interrupt */
+#endif	/* MOT_ELM */
+/*
+ * PLC Timing Parameters
+ */
+#define	TP_C_MIN	0xff9c	/*   2    ms */
+#define	TP_TL_MIN	0xfff0	/*   0.3  ms */
+#define	TP_TB_MIN	0xff10	/*   5    ms */
+#define	TP_T_OUT	0xd9db	/* 200    ms */
+#define	TP_LC_LENGTH	0xf676	/*  50    ms */
+#define	TP_LC_LONGLN	0xa0a2	/* 500    ms */
+#define	TP_T_SCRUB	0xff6d	/*   3.5  ms */
+#define	TP_NS_MAX	0xf021	/*   1.3   ms */
+
+/*
+ * BIST values
+ */
+#define PLC_BIST	0x6ecd		/* BIST signature for PLC */
+#define PLCS_BIST	0x5b6b 		/* BIST signature for PLC-S */
+#define	PLC_ELM_B_BIST	0x6ecd		/* BIST signature of ELM Rev. B */
+#define	PLC_ELM_D_BIST	0x5b6b		/* BIST signature of ELM Rev. D */
+#define	PLC_CAM_A_BIST	0x9e75		/* BIST signature of CAMEL Rev. A */
+#define	PLC_CAM_B_BIST	0x5b6b		/* BIST signature of CAMEL Rev. B */
+#define	PLC_IFD_A_BIST	0x9e75		/* BIST signature of IFDDI Rev. A */
+#define	PLC_IFD_B_BIST	0x5b6b		/* BIST signature of IFDDI Rev. B */
+#define	PLC_QELM_A_BIST	0x5b6b		/* BIST signature of QELM Rev. A */
+
+/*
+ 	FDDI board recources	
+ */
+
+/*
+ * request register array (log. addr: RQA_A + a<<1 {a=0..7}) write only.
+ * It specifies to FORMAC+ the type of buffer memory access the host requires.
+ */
+#define	RQ_NOT		0		/* not request */
+#define	RQ_RES		1		/* reserved */
+#define	RQ_SFW		2		/* special frame write */
+#define	RQ_RRQ		3		/* read request: receive queue */
+#define	RQ_WSQ		4		/* write request: synchronous queue */
+#define	RQ_WA0		5		/* write requ.: asynchronous queue 0 */
+#define	RQ_WA1		6		/* write requ.: asynchronous queue 1 */
+#define	RQ_WA2		7		/* write requ.: asynchronous queue 2 */
+
+#define	SZ_LONG		(sizeof(long))
+
+/*
+ * FDDI defaults
+ * NOTE : In the ANSI docs, times are specified in units of "symbol time".
+ * 	  AMD chips use BCLK as unit. 1 BCKL == 2 symbols
+ */
+#define	COMPLREF	((u_long)32*256*256)	/* two's complement 21 bit */
+#define MSTOBCLK(x)	((u_long)(x)*12500L)
+#define MSTOTVX(x)	(((u_long)(x)*1000L)/80/255)
+
+#endif	/* _SUPERNET_ */
diff --git a/drivers/net/fddi/skfp/h/targethw.h b/drivers/net/fddi/skfp/h/targethw.h
new file mode 100644
index 0000000..626dc72
--- /dev/null
+++ b/drivers/net/fddi/skfp/h/targethw.h
@@ -0,0 +1,138 @@
+/******************************************************************************
+ *
+ *	(C)Copyright 1998,1999 SysKonnect,
+ *	a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+#ifndef	_TARGETHW_
+#define _TARGETHW_
+
+	/*
+	 *  PCI Watermark definition
+	 */
+#ifdef	PCI
+#define	RX_WATERMARK	24
+#define TX_WATERMARK	24
+#define SK_ML_ID_1	0x20
+#define SK_ML_ID_2	0x30
+#endif
+
+#include	"h/skfbi.h"
+#ifndef TAG_MODE	
+#include	"h/fplus.h"
+#else
+#include	"h/fplustm.h"
+#endif
+
+#ifndef	HW_PTR
+#define HW_PTR  void __iomem *
+#endif
+
+#ifdef MULT_OEM
+#define	OI_STAT_LAST		0	/* end of OEM data base */
+#define	OI_STAT_PRESENT		1	/* entry present but not empty */
+#define	OI_STAT_VALID		2	/* holds valid ID, but is not active */ 
+#define	OI_STAT_ACTIVE		3	/* holds valid ID, entry is active */
+					/* active = adapter is supported */
+
+/* Memory representation of IDs must match representation in adapter. */
+struct	s_oem_ids {
+	u_char	oi_status ;		/* Stat: last, present, valid, active */
+	u_char	oi_mark[5] ;		/* "PID00" .. "PID07" ..	*/
+	u_char 	oi_id[4] ;		/* id bytes, representation as	*/
+					/* defined by hardware,		*/	
+#ifdef PCI
+	u_char 	oi_sub_id[4] ;		/* sub id bytes, representation as */
+					/* defined by hardware,		*/
+#endif
+} ;
+#endif	/* MULT_OEM */
+
+
+struct s_smt_hw {
+	/*
+	 * global
+	 */
+	HW_PTR	iop ;			/* IO base address */
+	short	dma ;			/* DMA channel */
+	short	irq ;			/* IRQ level */
+	short	eprom ;			/* FLASH prom */
+
+#ifndef SYNC
+	u_short	n_a_send ;		/* pending send requests */
+#endif
+
+#if	defined(PCI)
+	short	slot ;			/* slot number */
+	short   max_slots ;		/* maximum number of slots */
+	short	wdog_used ;		/* TRUE if the watch dog is used */
+#endif
+
+#ifdef	PCI
+	u_short	pci_handle ;		/* handle to access the BIOS func */
+	u_long	is_imask ;		/* int maske for the int source reg */
+	u_long	phys_mem_addr ;		/* physical memory address */
+	u_short	mc_dummy ;		/* work around for MC compiler bug */	
+	/*
+	 * state of the hardware
+	 */
+	u_short hw_state ;		/* started or stopped */
+
+#define	STARTED		1
+#define	STOPPED		0
+
+	int	hw_is_64bit ;		/* does we have a 64 bit adapter */
+#endif
+
+#ifdef	TAG_MODE
+	u_long	pci_fix_value ;		/* value parsed by PCIFIX */
+#endif
+
+	/*
+	 * hwt.c
+	 */
+	u_long	t_start ;		/* HWT start */
+	u_long	t_stop ;		/* HWT stop */
+	u_short	timer_activ ;		/* HWT timer active */
+
+	/*
+	 * PIC
+	 */
+	u_char	pic_a1 ;
+	u_char	pic_21 ;
+
+	/*
+	 * GENERIC ; do not modify beyond this line
+	 */
+
+	/*
+	 * physical and canonical address
+	 */
+	struct fddi_addr fddi_home_addr ;
+	struct fddi_addr fddi_canon_addr ;
+	struct fddi_addr fddi_phys_addr ;
+
+	/*
+	 * mac variables
+	 */
+	struct mac_parameter mac_pa ;	/* tmin, tmax, tvx, treq .. */
+	struct mac_counter mac_ct ;	/* recv., lost, error  */
+	u_short	mac_ring_is_up ;	/* ring is up flag */
+
+	struct s_smt_fp	fp ;		/* formac+ */
+
+#ifdef MULT_OEM
+	struct s_oem_ids *oem_id ;	/* pointer to selected id */
+	int oem_min_status ;		/* IDs to take care of */
+#endif	/* MULT_OEM */
+
+} ;
+#endif
diff --git a/drivers/net/fddi/skfp/h/targetos.h b/drivers/net/fddi/skfp/h/targetos.h
new file mode 100644
index 0000000..5d940e7
--- /dev/null
+++ b/drivers/net/fddi/skfp/h/targetos.h
@@ -0,0 +1,165 @@
+/******************************************************************************
+ *
+ *	(C)Copyright 1998,1999 SysKonnect,
+ *	a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+ *	Operating system specific definitions for driver and
+ *	hardware module.
+ */
+
+#ifndef	TARGETOS_H
+#define TARGETOS_H
+
+
+//-------- those should go into include/linux/pci.h
+#define PCI_VENDOR_ID_SK		0x1148
+#define PCI_DEVICE_ID_SK_FP		0x4000
+//--------
+
+
+
+//-------- those should go into include/linux/if_fddi.h
+#define FDDI_MAC_HDR_LEN 13
+
+#define FDDI_RII	0x01 /* routing information bit */
+#define FDDI_RCF_DIR_BIT 0x80
+#define FDDI_RCF_LEN_MASK 0x1f
+#define FDDI_RCF_BROADCAST 0x8000
+#define FDDI_RCF_LIMITED_BROADCAST 0xA000
+#define FDDI_RCF_FRAME2K 0x20
+#define FDDI_RCF_FRAME4K 0x30
+//--------
+
+
+#undef ADDR
+
+#include <asm/io.h>
+#include <linux/netdevice.h>
+#include <linux/fddidevice.h>
+#include <linux/skbuff.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+
+// is redefined by linux, but we need our definition
+#undef ADDR
+#ifdef MEM_MAPPED_IO
+#define	ADDR(a) (smc->hw.iop+(a))
+#else
+#define	ADDR(a) (((a)>>7) ? (outp(smc->hw.iop+B0_RAP,(a)>>7), (smc->hw.iop+( ((a)&0x7F) | ((a)>>7 ? 0x80:0)) )) : (smc->hw.iop+(((a)&0x7F)|((a)>>7 ? 0x80:0))))
+#endif
+
+#include "h/hwmtm.h"
+
+#define TRUE  1
+#define FALSE 0
+
+// HWM Definitions
+// -----------------------
+#define FDDI_TRACE(string, arg1, arg2, arg3)	// Performance analysis.
+#ifdef PCI
+#define NDD_TRACE(string, arg1, arg2, arg3)	// Performance analysis.
+#endif	// PCI
+#define SMT_PAGESIZE	PAGE_SIZE	// Size of a memory page (power of 2).
+// -----------------------
+
+
+// SMT Definitions
+// -----------------------
+#define	TICKS_PER_SECOND	HZ
+#define SMC_VERSION    		1
+// -----------------------
+
+
+// OS-Driver Definitions
+// -----------------------
+#define NO_ADDRESS 0xffe0	/* No Device (I/O) Address */
+#define SKFP_MAX_NUM_BOARDS 8	/* maximum number of PCI boards */
+
+#define SK_BUS_TYPE_PCI		0
+#define SK_BUS_TYPE_EISA	1
+
+#define FP_IO_LEN		256	/* length of IO area used */
+
+#define u8	unsigned char
+#define u16	unsigned short
+#define u32	unsigned int
+
+#define MAX_TX_QUEUE_LEN	20 // number of packets queued by driver
+#define MAX_FRAME_SIZE		4550
+
+#define	RX_LOW_WATERMARK	NUM_RECEIVE_BUFFERS  / 2
+#define TX_LOW_WATERMARK	NUM_TRANSMIT_BUFFERS - 2
+
+/*
+** Include the IOCTL stuff
+*/
+#include <linux/sockios.h>
+
+#define	SKFPIOCTL	SIOCDEVPRIVATE
+
+struct s_skfp_ioctl {
+	unsigned short cmd;                /* Command to run */
+	unsigned short len;                /* Length of the data buffer */
+	unsigned char __user *data;        /* Pointer to the data buffer */
+};
+
+/* 
+** Recognised ioctl commands for the driver 
+*/
+#define SKFP_GET_STATS		0x05 /* Get the driver statistics */
+#define SKFP_CLR_STATS		0x06 /* Zero out the driver statistics */
+
+// The per-adapter driver structure
+struct s_smt_os {
+	struct net_device *dev;
+	struct net_device *next_module;
+	u32	bus_type;		/* bus type (0 == PCI, 1 == EISA) */
+	struct pci_dev 	pdev;		/* PCI device structure */
+	
+	unsigned long base_addr;
+	unsigned char factory_mac_addr[8];
+	ulong	SharedMemSize;
+	ulong	SharedMemHeap;
+	void*	SharedMemAddr;
+	dma_addr_t SharedMemDMA;
+
+	ulong	QueueSkb;
+	struct	sk_buff_head SendSkbQueue;
+
+	ulong	MaxFrameSize;
+	u8	ResetRequested;
+
+	// MAC statistics structure
+	struct fddi_statistics MacStat;
+
+	// receive into this local buffer if no skb available
+	// data will be not valid, because multiple RxDs can
+	// point here at the same time, it must be at least
+	// MAX_FRAME_SIZE bytes in size
+	unsigned char *LocalRxBuffer;
+	dma_addr_t LocalRxBufferDMA;
+	
+	// Version (required by SMT module).
+	u_long smc_version ;
+
+	// Required by Hardware Module (HWM).
+	struct hw_modul hwm ;
+	
+	// For SMP-savety
+	spinlock_t DriverLock;
+	
+};
+
+typedef struct s_smt_os skfddi_priv;
+
+#endif	 // _TARGETOS_
diff --git a/drivers/net/fddi/skfp/h/types.h b/drivers/net/fddi/skfp/h/types.h
new file mode 100644
index 0000000..5a3bf83
--- /dev/null
+++ b/drivers/net/fddi/skfp/h/types.h
@@ -0,0 +1,39 @@
+/******************************************************************************
+ *
+ *	(C)Copyright 1998,1999 SysKonnect,
+ *	a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+#include	<linux/types.h>
+/*
+	----------------------
+	Basic SMT system types
+	----------------------
+*/
+#ifndef _TYPES_
+#define	_TYPES_
+
+#define _packed
+#ifndef far
+#define far
+#endif
+#ifndef _far
+#define _far
+#endif
+
+#define inp(p)  ioread8(p)
+#define inpw(p)	ioread16(p)
+#define inpd(p) ioread32(p)
+#define outp(p,c)  iowrite8(c,p)
+#define outpw(p,s) iowrite16(s,p)
+#define outpd(p,l) iowrite32(l,p)
+
+#endif	/* _TYPES_ */
diff --git a/drivers/net/fddi/skfp/hwmtm.c b/drivers/net/fddi/skfp/hwmtm.c
new file mode 100644
index 0000000..e26398b
--- /dev/null
+++ b/drivers/net/fddi/skfp/hwmtm.c
@@ -0,0 +1,2178 @@
+/******************************************************************************
+ *
+ *	(C)Copyright 1998,1999 SysKonnect,
+ *	a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ *	See the file "skfddi.c" for further information.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+#ifndef	lint
+static char const ID_sccs[] = "@(#)hwmtm.c	1.40 99/05/31 (C) SK" ;
+#endif
+
+#define	HWMTM
+
+#ifndef FDDI
+#define	FDDI
+#endif
+
+#include "h/types.h"
+#include "h/fddi.h"
+#include "h/smc.h"
+#include "h/supern_2.h"
+#include "h/skfbiinc.h"
+
+/*
+	-------------------------------------------------------------
+	DOCUMENTATION
+	-------------------------------------------------------------
+	BEGIN_MANUAL_ENTRY(DOCUMENTATION)
+
+			T B D
+
+	END_MANUAL_ENTRY
+*/
+/*
+	-------------------------------------------------------------
+	LOCAL VARIABLES:
+	-------------------------------------------------------------
+*/
+#ifdef COMMON_MB_POOL
+static	SMbuf *mb_start = 0 ;
+static	SMbuf *mb_free = 0 ;
+static	int mb_init = FALSE ;
+static	int call_count = 0 ;
+#endif
+
+/*
+	-------------------------------------------------------------
+	EXTERNE VARIABLES:
+	-------------------------------------------------------------
+*/
+
+#ifdef	DEBUG
+#ifndef	DEBUG_BRD
+extern	struct smt_debug	debug ;
+#endif
+#endif
+
+#ifdef	NDIS_OS2
+extern	u_char	offDepth ;
+extern	u_char	force_irq_pending ;
+#endif
+
+/*
+	-------------------------------------------------------------
+	LOCAL FUNCTIONS:
+	-------------------------------------------------------------
+*/
+
+static void queue_llc_rx(struct s_smc *smc, SMbuf *mb);
+static void smt_to_llc(struct s_smc *smc, SMbuf *mb);
+static void init_txd_ring(struct s_smc *smc);
+static void init_rxd_ring(struct s_smc *smc);
+static void queue_txd_mb(struct s_smc *smc, SMbuf *mb);
+static u_long init_descr_ring(struct s_smc *smc, union s_fp_descr volatile *start,
+			      int count);
+static u_long repair_txd_ring(struct s_smc *smc, struct s_smt_tx_queue *queue);
+static u_long repair_rxd_ring(struct s_smc *smc, struct s_smt_rx_queue *queue);
+static SMbuf* get_llc_rx(struct s_smc *smc);
+static SMbuf* get_txd_mb(struct s_smc *smc);
+static void mac_drv_clear_txd(struct s_smc *smc);
+
+/*
+	-------------------------------------------------------------
+	EXTERNAL FUNCTIONS:
+	-------------------------------------------------------------
+*/
+/*	The external SMT functions are listed in cmtdef.h */
+
+extern void* mac_drv_get_space(struct s_smc *smc, unsigned int size);
+extern void* mac_drv_get_desc_mem(struct s_smc *smc, unsigned int size);
+extern void mac_drv_fill_rxd(struct s_smc *smc);
+extern void mac_drv_tx_complete(struct s_smc *smc,
+				volatile struct s_smt_fp_txd *txd);
+extern void mac_drv_rx_complete(struct s_smc *smc,
+				volatile struct s_smt_fp_rxd *rxd,
+				int frag_count, int len);
+extern void mac_drv_requeue_rxd(struct s_smc *smc, 
+				volatile struct s_smt_fp_rxd *rxd,
+				int frag_count);
+extern void mac_drv_clear_rxd(struct s_smc *smc,
+			      volatile struct s_smt_fp_rxd *rxd, int frag_count);
+
+#ifdef	USE_OS_CPY
+extern void hwm_cpy_rxd2mb(void);
+extern void hwm_cpy_txd2mb(void);
+#endif
+
+#ifdef	ALL_RX_COMPLETE
+extern void mac_drv_all_receives_complete(void);
+#endif
+
+extern u_long mac_drv_virt2phys(struct s_smc *smc, void *virt);
+extern u_long dma_master(struct s_smc *smc, void *virt, int len, int flag);
+
+#ifdef	NDIS_OS2
+extern void post_proc(void);
+#else
+extern void dma_complete(struct s_smc *smc, volatile union s_fp_descr *descr,
+			 int flag);
+#endif
+
+extern int mac_drv_rx_init(struct s_smc *smc, int len, int fc, char *look_ahead,
+			   int la_len);
+
+/*
+	-------------------------------------------------------------
+	PUBLIC FUNCTIONS:
+	-------------------------------------------------------------
+*/
+void process_receive(struct s_smc *smc);
+void fddi_isr(struct s_smc *smc);
+void smt_free_mbuf(struct s_smc *smc, SMbuf *mb);
+void init_driver_fplus(struct s_smc *smc);
+void mac_drv_rx_mode(struct s_smc *smc, int mode);
+void init_fddi_driver(struct s_smc *smc, u_char *mac_addr);
+void mac_drv_clear_tx_queue(struct s_smc *smc);
+void mac_drv_clear_rx_queue(struct s_smc *smc);
+void hwm_tx_frag(struct s_smc *smc, char far *virt, u_long phys, int len,
+		 int frame_status);
+void hwm_rx_frag(struct s_smc *smc, char far *virt, u_long phys, int len,
+		 int frame_status);
+
+int mac_drv_init(struct s_smc *smc);
+int hwm_tx_init(struct s_smc *smc, u_char fc, int frag_count, int frame_len,
+		int frame_status);
+
+u_int mac_drv_check_space(void);
+
+SMbuf* smt_get_mbuf(struct s_smc *smc);
+
+#ifdef DEBUG
+	void mac_drv_debug_lev(void);
+#endif
+
+/*
+	-------------------------------------------------------------
+	MACROS:
+	-------------------------------------------------------------
+*/
+#ifndef	UNUSED
+#ifdef	lint
+#define UNUSED(x)	(x) = (x)
+#else
+#define UNUSED(x)
+#endif
+#endif
+
+#ifdef	USE_CAN_ADDR
+#define MA		smc->hw.fddi_canon_addr.a
+#define	GROUP_ADDR_BIT	0x01
+#else
+#define	MA		smc->hw.fddi_home_addr.a
+#define	GROUP_ADDR_BIT	0x80
+#endif
+
+#define RXD_TXD_COUNT	(HWM_ASYNC_TXD_COUNT+HWM_SYNC_TXD_COUNT+\
+			SMT_R1_RXD_COUNT+SMT_R2_RXD_COUNT)
+
+#ifdef	MB_OUTSIDE_SMC
+#define	EXT_VIRT_MEM	((RXD_TXD_COUNT+1)*sizeof(struct s_smt_fp_txd) +\
+			MAX_MBUF*sizeof(SMbuf))
+#define	EXT_VIRT_MEM_2	((RXD_TXD_COUNT+1)*sizeof(struct s_smt_fp_txd))
+#else
+#define	EXT_VIRT_MEM	((RXD_TXD_COUNT+1)*sizeof(struct s_smt_fp_txd))
+#endif
+
+	/*
+	 * define critical read for 16 Bit drivers
+	 */
+#if	defined(NDIS_OS2) || defined(ODI2)
+#define CR_READ(var)	((var) & 0xffff0000 | ((var) & 0xffff))
+#else
+#define CR_READ(var)	(__le32)(var)
+#endif
+
+#define IMASK_SLOW	(IS_PLINT1 | IS_PLINT2 | IS_TIMINT | IS_TOKEN | \
+			 IS_MINTR1 | IS_MINTR2 | IS_MINTR3 | IS_R1_P | \
+			 IS_R1_C | IS_XA_C | IS_XS_C)
+
+/*
+	-------------------------------------------------------------
+	INIT- AND SMT FUNCTIONS:
+	-------------------------------------------------------------
+*/
+
+
+/*
+ *	BEGIN_MANUAL_ENTRY(mac_drv_check_space)
+ *	u_int mac_drv_check_space()
+ *
+ *	function	DOWNCALL	(drvsr.c)
+ *			This function calculates the needed non virtual
+ *			memory for MBufs, RxD and TxD descriptors etc.
+ *			needed by the driver.
+ *
+ *	return		u_int	memory in bytes
+ *
+ *	END_MANUAL_ENTRY
+ */
+u_int mac_drv_check_space(void)
+{
+#ifdef	MB_OUTSIDE_SMC
+#ifdef	COMMON_MB_POOL
+	call_count++ ;
+	if (call_count == 1) {
+		return EXT_VIRT_MEM;
+	}
+	else {
+		return EXT_VIRT_MEM_2;
+	}
+#else
+	return EXT_VIRT_MEM;
+#endif
+#else
+	return 0;
+#endif
+}
+
+/*
+ *	BEGIN_MANUAL_ENTRY(mac_drv_init)
+ *	void mac_drv_init(smc)
+ *
+ *	function	DOWNCALL	(drvsr.c)
+ *			In this function the hardware module allocates it's
+ *			memory.
+ *			The operating system dependent module should call
+ *			mac_drv_init once, after the adatper is detected.
+ *	END_MANUAL_ENTRY
+ */
+int mac_drv_init(struct s_smc *smc)
+{
+	if (sizeof(struct s_smt_fp_rxd) % 16) {
+		SMT_PANIC(smc,HWM_E0001,HWM_E0001_MSG) ;
+	}
+	if (sizeof(struct s_smt_fp_txd) % 16) {
+		SMT_PANIC(smc,HWM_E0002,HWM_E0002_MSG) ;
+	}
+
+	/*
+	 * get the required memory for the RxDs and TxDs
+	 */
+	if (!(smc->os.hwm.descr_p = (union s_fp_descr volatile *)
+		mac_drv_get_desc_mem(smc,(u_int)
+		(RXD_TXD_COUNT+1)*sizeof(struct s_smt_fp_txd)))) {
+		return 1;	/* no space the hwm modul can't work */
+	}
+
+	/*
+	 * get the memory for the SMT MBufs
+	 */
+#ifndef	MB_OUTSIDE_SMC
+	smc->os.hwm.mbuf_pool.mb_start=(SMbuf *)(&smc->os.hwm.mbuf_pool.mb[0]) ;
+#else
+#ifndef	COMMON_MB_POOL
+	if (!(smc->os.hwm.mbuf_pool.mb_start = (SMbuf *) mac_drv_get_space(smc,
+		MAX_MBUF*sizeof(SMbuf)))) {
+		return 1;	/* no space the hwm modul can't work */
+	}
+#else
+	if (!mb_start) {
+		if (!(mb_start = (SMbuf *) mac_drv_get_space(smc,
+			MAX_MBUF*sizeof(SMbuf)))) {
+			return 1;	/* no space the hwm modul can't work */
+		}
+	}
+#endif
+#endif
+	return 0;
+}
+
+/*
+ *	BEGIN_MANUAL_ENTRY(init_driver_fplus)
+ *	init_driver_fplus(smc)
+ *
+ * Sets hardware modul specific values for the mode register 2
+ * (e.g. the byte alignment for the received frames, the position of the
+ *	 least significant byte etc.)
+ *	END_MANUAL_ENTRY
+ */
+void init_driver_fplus(struct s_smc *smc)
+{
+	smc->hw.fp.mdr2init = FM_LSB | FM_BMMODE | FM_ENNPRQ | FM_ENHSRQ | 3 ;
+
+#ifdef	PCI
+	smc->hw.fp.mdr2init |= FM_CHKPAR | FM_PARITY ;
+#endif
+	smc->hw.fp.mdr3init = FM_MENRQAUNLCK | FM_MENRS ;
+
+#ifdef	USE_CAN_ADDR
+	/* enable address bit swapping */
+	smc->hw.fp.frselreg_init = FM_ENXMTADSWAP | FM_ENRCVADSWAP ;
+#endif
+}
+
+static u_long init_descr_ring(struct s_smc *smc,
+			      union s_fp_descr volatile *start,
+			      int count)
+{
+	int i ;
+	union s_fp_descr volatile *d1 ;
+	union s_fp_descr volatile *d2 ;
+	u_long	phys ;
+
+	DB_GEN("descr ring starts at = %x ",(void *)start,0,3) ;
+	for (i=count-1, d1=start; i ; i--) {
+		d2 = d1 ;
+		d1++ ;		/* descr is owned by the host */
+		d2->r.rxd_rbctrl = cpu_to_le32(BMU_CHECK) ;
+		d2->r.rxd_next = &d1->r ;
+		phys = mac_drv_virt2phys(smc,(void *)d1) ;
+		d2->r.rxd_nrdadr = cpu_to_le32(phys) ;
+	}
+	DB_GEN("descr ring ends at = %x ",(void *)d1,0,3) ;
+	d1->r.rxd_rbctrl = cpu_to_le32(BMU_CHECK) ;
+	d1->r.rxd_next = &start->r ;
+	phys = mac_drv_virt2phys(smc,(void *)start) ;
+	d1->r.rxd_nrdadr = cpu_to_le32(phys) ;
+
+	for (i=count, d1=start; i ; i--) {
+		DRV_BUF_FLUSH(&d1->r,DDI_DMA_SYNC_FORDEV) ;
+		d1++;
+	}
+	return phys;
+}
+
+static void init_txd_ring(struct s_smc *smc)
+{
+	struct s_smt_fp_txd volatile *ds ;
+	struct s_smt_tx_queue *queue ;
+	u_long	phys ;
+
+	/*
+	 * initialize the transmit descriptors
+	 */
+	ds = (struct s_smt_fp_txd volatile *) ((char *)smc->os.hwm.descr_p +
+		SMT_R1_RXD_COUNT*sizeof(struct s_smt_fp_rxd)) ;
+	queue = smc->hw.fp.tx[QUEUE_A0] ;
+	DB_GEN("Init async TxD ring, %d TxDs ",HWM_ASYNC_TXD_COUNT,0,3) ;
+	(void)init_descr_ring(smc,(union s_fp_descr volatile *)ds,
+		HWM_ASYNC_TXD_COUNT) ;
+	phys = le32_to_cpu(ds->txd_ntdadr) ;
+	ds++ ;
+	queue->tx_curr_put = queue->tx_curr_get = ds ;
+	ds-- ;
+	queue->tx_free = HWM_ASYNC_TXD_COUNT ;
+	queue->tx_used = 0 ;
+	outpd(ADDR(B5_XA_DA),phys) ;
+
+	ds = (struct s_smt_fp_txd volatile *) ((char *)ds +
+		HWM_ASYNC_TXD_COUNT*sizeof(struct s_smt_fp_txd)) ;
+	queue = smc->hw.fp.tx[QUEUE_S] ;
+	DB_GEN("Init sync TxD ring, %d TxDs ",HWM_SYNC_TXD_COUNT,0,3) ;
+	(void)init_descr_ring(smc,(union s_fp_descr volatile *)ds,
+		HWM_SYNC_TXD_COUNT) ;
+	phys = le32_to_cpu(ds->txd_ntdadr) ;
+	ds++ ;
+	queue->tx_curr_put = queue->tx_curr_get = ds ;
+	queue->tx_free = HWM_SYNC_TXD_COUNT ;
+	queue->tx_used = 0 ;
+	outpd(ADDR(B5_XS_DA),phys) ;
+}
+
+static void init_rxd_ring(struct s_smc *smc)
+{
+	struct s_smt_fp_rxd volatile *ds ;
+	struct s_smt_rx_queue *queue ;
+	u_long	phys ;
+
+	/*
+	 * initialize the receive descriptors
+	 */
+	ds = (struct s_smt_fp_rxd volatile *) smc->os.hwm.descr_p ;
+	queue = smc->hw.fp.rx[QUEUE_R1] ;
+	DB_GEN("Init RxD ring, %d RxDs ",SMT_R1_RXD_COUNT,0,3) ;
+	(void)init_descr_ring(smc,(union s_fp_descr volatile *)ds,
+		SMT_R1_RXD_COUNT) ;
+	phys = le32_to_cpu(ds->rxd_nrdadr) ;
+	ds++ ;
+	queue->rx_curr_put = queue->rx_curr_get = ds ;
+	queue->rx_free = SMT_R1_RXD_COUNT ;
+	queue->rx_used = 0 ;
+	outpd(ADDR(B4_R1_DA),phys) ;
+}
+
+/*
+ *	BEGIN_MANUAL_ENTRY(init_fddi_driver)
+ *	void init_fddi_driver(smc,mac_addr)
+ *
+ * initializes the driver and it's variables
+ *
+ *	END_MANUAL_ENTRY
+ */
+void init_fddi_driver(struct s_smc *smc, u_char *mac_addr)
+{
+	SMbuf	*mb ;
+	int	i ;
+
+	init_board(smc,mac_addr) ;
+	(void)init_fplus(smc) ;
+
+	/*
+	 * initialize the SMbufs for the SMT
+	 */
+#ifndef	COMMON_MB_POOL
+	mb = smc->os.hwm.mbuf_pool.mb_start ;
+	smc->os.hwm.mbuf_pool.mb_free = (SMbuf *)NULL ;
+	for (i = 0; i < MAX_MBUF; i++) {
+		mb->sm_use_count = 1 ;
+		smt_free_mbuf(smc,mb)	;
+		mb++ ;
+	}
+#else
+	mb = mb_start ;
+	if (!mb_init) {
+		mb_free = 0 ;
+		for (i = 0; i < MAX_MBUF; i++) {
+			mb->sm_use_count = 1 ;
+			smt_free_mbuf(smc,mb)	;
+			mb++ ;
+		}
+		mb_init = TRUE ;
+	}
+#endif
+
+	/*
+	 * initialize the other variables
+	 */
+	smc->os.hwm.llc_rx_pipe = smc->os.hwm.llc_rx_tail = (SMbuf *)NULL ;
+	smc->os.hwm.txd_tx_pipe = smc->os.hwm.txd_tx_tail = NULL ;
+	smc->os.hwm.pass_SMT = smc->os.hwm.pass_NSA = smc->os.hwm.pass_DB = 0 ;
+	smc->os.hwm.pass_llc_promisc = TRUE ;
+	smc->os.hwm.queued_rx_frames = smc->os.hwm.queued_txd_mb = 0 ;
+	smc->os.hwm.detec_count = 0 ;
+	smc->os.hwm.rx_break = 0 ;
+	smc->os.hwm.rx_len_error = 0 ;
+	smc->os.hwm.isr_flag = FALSE ;
+
+	/*
+	 * make sure that the start pointer is 16 byte aligned
+	 */
+	i = 16 - ((long)smc->os.hwm.descr_p & 0xf) ;
+	if (i != 16) {
+		DB_GEN("i = %d",i,0,3) ;
+		smc->os.hwm.descr_p = (union s_fp_descr volatile *)
+			((char *)smc->os.hwm.descr_p+i) ;
+	}
+	DB_GEN("pt to descr area = %x",(void *)smc->os.hwm.descr_p,0,3) ;
+
+	init_txd_ring(smc) ;
+	init_rxd_ring(smc) ;
+	mac_drv_fill_rxd(smc) ;
+
+	init_plc(smc) ;
+}
+
+
+SMbuf *smt_get_mbuf(struct s_smc *smc)
+{
+	register SMbuf	*mb ;
+
+#ifndef	COMMON_MB_POOL
+	mb = smc->os.hwm.mbuf_pool.mb_free ;
+#else
+	mb = mb_free ;
+#endif
+	if (mb) {
+#ifndef	COMMON_MB_POOL
+		smc->os.hwm.mbuf_pool.mb_free = mb->sm_next ;
+#else
+		mb_free = mb->sm_next ;
+#endif
+		mb->sm_off = 8 ;
+		mb->sm_use_count = 1 ;
+	}
+	DB_GEN("get SMbuf: mb = %x",(void *)mb,0,3) ;
+	return mb;	/* May be NULL */
+}
+
+void smt_free_mbuf(struct s_smc *smc, SMbuf *mb)
+{
+
+	if (mb) {
+		mb->sm_use_count-- ;
+		DB_GEN("free_mbuf: sm_use_count = %d",mb->sm_use_count,0,3) ;
+		/*
+		 * If the use_count is != zero the MBuf is queued
+		 * more than once and must not queued into the
+		 * free MBuf queue
+		 */
+		if (!mb->sm_use_count) {
+			DB_GEN("free SMbuf: mb = %x",(void *)mb,0,3) ;
+#ifndef	COMMON_MB_POOL
+			mb->sm_next = smc->os.hwm.mbuf_pool.mb_free ;
+			smc->os.hwm.mbuf_pool.mb_free = mb ;
+#else
+			mb->sm_next = mb_free ;
+			mb_free = mb ;
+#endif
+		}
+	}
+	else
+		SMT_PANIC(smc,HWM_E0003,HWM_E0003_MSG) ;
+}
+
+
+/*
+ *	BEGIN_MANUAL_ENTRY(mac_drv_repair_descr)
+ *	void mac_drv_repair_descr(smc)
+ *
+ * function	called from SMT	(HWM / hwmtm.c)
+ *		The BMU is idle when this function is called.
+ *		Mac_drv_repair_descr sets up the physical address
+ *		for all receive and transmit queues where the BMU
+ *		should continue.
+ *		It may be that the BMU was reseted during a fragmented
+ *		transfer. In this case there are some fragments which will
+ *		never completed by the BMU. The OWN bit of this fragments
+ *		must be switched to be owned by the host.
+ *
+ *		Give a start command to the receive BMU.
+ *		Start the transmit BMUs if transmit frames pending.
+ *
+ *	END_MANUAL_ENTRY
+ */
+void mac_drv_repair_descr(struct s_smc *smc)
+{
+	u_long	phys ;
+
+	if (smc->hw.hw_state != STOPPED) {
+		SK_BREAK() ;
+		SMT_PANIC(smc,HWM_E0013,HWM_E0013_MSG) ;
+		return ;
+	}
+
+	/*
+	 * repair tx queues: don't start
+	 */
+	phys = repair_txd_ring(smc,smc->hw.fp.tx[QUEUE_A0]) ;
+	outpd(ADDR(B5_XA_DA),phys) ;
+	if (smc->hw.fp.tx_q[QUEUE_A0].tx_used) {
+		outpd(ADDR(B0_XA_CSR),CSR_START) ;
+	}
+	phys = repair_txd_ring(smc,smc->hw.fp.tx[QUEUE_S]) ;
+	outpd(ADDR(B5_XS_DA),phys) ;
+	if (smc->hw.fp.tx_q[QUEUE_S].tx_used) {
+		outpd(ADDR(B0_XS_CSR),CSR_START) ;
+	}
+
+	/*
+	 * repair rx queues
+	 */
+	phys = repair_rxd_ring(smc,smc->hw.fp.rx[QUEUE_R1]) ;
+	outpd(ADDR(B4_R1_DA),phys) ;
+	outpd(ADDR(B0_R1_CSR),CSR_START) ;
+}
+
+static u_long repair_txd_ring(struct s_smc *smc, struct s_smt_tx_queue *queue)
+{
+	int i ;
+	int tx_used ;
+	u_long phys ;
+	u_long tbctrl ;
+	struct s_smt_fp_txd volatile *t ;
+
+	SK_UNUSED(smc) ;
+
+	t = queue->tx_curr_get ;
+	tx_used = queue->tx_used ;
+	for (i = tx_used+queue->tx_free-1 ; i ; i-- ) {
+		t = t->txd_next ;
+	}
+	phys = le32_to_cpu(t->txd_ntdadr) ;
+
+	t = queue->tx_curr_get ;
+	while (tx_used) {
+		DRV_BUF_FLUSH(t,DDI_DMA_SYNC_FORCPU) ;
+		tbctrl = le32_to_cpu(t->txd_tbctrl) ;
+
+		if (tbctrl & BMU_OWN) {
+			if (tbctrl & BMU_STF) {
+				break ;		/* exit the loop */
+			}
+			else {
+				/*
+				 * repair the descriptor
+				 */
+				t->txd_tbctrl &= ~cpu_to_le32(BMU_OWN) ;
+			}
+		}
+		phys = le32_to_cpu(t->txd_ntdadr) ;
+		DRV_BUF_FLUSH(t,DDI_DMA_SYNC_FORDEV) ;
+		t = t->txd_next ;
+		tx_used-- ;
+	}
+	return phys;
+}
+
+/*
+ * Repairs the receive descriptor ring and returns the physical address
+ * where the BMU should continue working.
+ *
+ *	o The physical address where the BMU was stopped has to be
+ *	  determined. This is the next RxD after rx_curr_get with an OWN
+ *	  bit set.
+ *	o The BMU should start working at beginning of the next frame.
+ *	  RxDs with an OWN bit set but with a reset STF bit should be
+ *	  skipped and owned by the driver (OWN = 0). 
+ */
+static u_long repair_rxd_ring(struct s_smc *smc, struct s_smt_rx_queue *queue)
+{
+	int i ;
+	int rx_used ;
+	u_long phys ;
+	u_long rbctrl ;
+	struct s_smt_fp_rxd volatile *r ;
+
+	SK_UNUSED(smc) ;
+
+	r = queue->rx_curr_get ;
+	rx_used = queue->rx_used ;
+	for (i = SMT_R1_RXD_COUNT-1 ; i ; i-- ) {
+		r = r->rxd_next ;
+	}
+	phys = le32_to_cpu(r->rxd_nrdadr) ;
+
+	r = queue->rx_curr_get ;
+	while (rx_used) {
+		DRV_BUF_FLUSH(r,DDI_DMA_SYNC_FORCPU) ;
+		rbctrl = le32_to_cpu(r->rxd_rbctrl) ;
+
+		if (rbctrl & BMU_OWN) {
+			if (rbctrl & BMU_STF) {
+				break ;		/* exit the loop */
+			}
+			else {
+				/*
+				 * repair the descriptor
+				 */
+				r->rxd_rbctrl &= ~cpu_to_le32(BMU_OWN) ;
+			}
+		}
+		phys = le32_to_cpu(r->rxd_nrdadr) ;
+		DRV_BUF_FLUSH(r,DDI_DMA_SYNC_FORDEV) ;
+		r = r->rxd_next ;
+		rx_used-- ;
+	}
+	return phys;
+}
+
+
+/*
+	-------------------------------------------------------------
+	INTERRUPT SERVICE ROUTINE:
+	-------------------------------------------------------------
+*/
+
+/*
+ *	BEGIN_MANUAL_ENTRY(fddi_isr)
+ *	void fddi_isr(smc)
+ *
+ * function	DOWNCALL	(drvsr.c)
+ *		interrupt service routine, handles the interrupt requests
+ *		generated by the FDDI adapter.
+ *
+ * NOTE:	The operating system dependent module must guarantee that the
+ *		interrupts of the adapter are disabled when it calls fddi_isr.
+ *
+ *	About the USE_BREAK_ISR mechanismn:
+ *
+ *	The main requirement of this mechanismn is to force an timer IRQ when
+ *	leaving process_receive() with leave_isr set. process_receive() may
+ *	be called at any time from anywhere!
+ *	To be sure we don't miss such event we set 'force_irq' per default.
+ *	We have to force and Timer IRQ if 'smc->os.hwm.leave_isr' AND
+ *	'force_irq' are set. 'force_irq' may be reset if a receive complete
+ *	IRQ is pending.
+ *
+ *	END_MANUAL_ENTRY
+ */
+void fddi_isr(struct s_smc *smc)
+{
+	u_long		is ;		/* ISR source */
+	u_short		stu, stl ;
+	SMbuf		*mb ;
+
+#ifdef	USE_BREAK_ISR
+	int	force_irq ;
+#endif
+
+#ifdef	ODI2
+	if (smc->os.hwm.rx_break) {
+		mac_drv_fill_rxd(smc) ;
+		if (smc->hw.fp.rx_q[QUEUE_R1].rx_used > 0) {
+			smc->os.hwm.rx_break = 0 ;
+			process_receive(smc) ;
+		}
+		else {
+			smc->os.hwm.detec_count = 0 ;
+			smt_force_irq(smc) ;
+		}
+	}
+#endif
+	smc->os.hwm.isr_flag = TRUE ;
+
+#ifdef	USE_BREAK_ISR
+	force_irq = TRUE ;
+	if (smc->os.hwm.leave_isr) {
+		smc->os.hwm.leave_isr = FALSE ;
+		process_receive(smc) ;
+	}
+#endif
+
+	while ((is = GET_ISR() & ISR_MASK)) {
+		NDD_TRACE("CH0B",is,0,0) ;
+		DB_GEN("ISA = 0x%x",is,0,7) ;
+
+		if (is & IMASK_SLOW) {
+			NDD_TRACE("CH1b",is,0,0) ;
+			if (is & IS_PLINT1) {	/* PLC1 */
+				plc1_irq(smc) ;
+			}
+			if (is & IS_PLINT2) {	/* PLC2 */
+				plc2_irq(smc) ;
+			}
+			if (is & IS_MINTR1) {	/* FORMAC+ STU1(U/L) */
+				stu = inpw(FM_A(FM_ST1U)) ;
+				stl = inpw(FM_A(FM_ST1L)) ;
+				DB_GEN("Slow transmit complete",0,0,6) ;
+				mac1_irq(smc,stu,stl) ;
+			}
+			if (is & IS_MINTR2) {	/* FORMAC+ STU2(U/L) */
+				stu= inpw(FM_A(FM_ST2U)) ;
+				stl= inpw(FM_A(FM_ST2L)) ;
+				DB_GEN("Slow receive complete",0,0,6) ;
+				DB_GEN("stl = %x : stu = %x",stl,stu,7) ;
+				mac2_irq(smc,stu,stl) ;
+			}
+			if (is & IS_MINTR3) {	/* FORMAC+ STU3(U/L) */
+				stu= inpw(FM_A(FM_ST3U)) ;
+				stl= inpw(FM_A(FM_ST3L)) ;
+				DB_GEN("FORMAC Mode Register 3",0,0,6) ;
+				mac3_irq(smc,stu,stl) ;
+			}
+			if (is & IS_TIMINT) {	/* Timer 82C54-2 */
+				timer_irq(smc) ;
+#ifdef	NDIS_OS2
+				force_irq_pending = 0 ;
+#endif
+				/*
+				 * out of RxD detection
+				 */
+				if (++smc->os.hwm.detec_count > 4) {
+					/*
+					 * check out of RxD condition
+					 */
+					 process_receive(smc) ;
+				}
+			}
+			if (is & IS_TOKEN) {	/* Restricted Token Monitor */
+				rtm_irq(smc) ;
+			}
+			if (is & IS_R1_P) {	/* Parity error rx queue 1 */
+				/* clear IRQ */
+				outpd(ADDR(B4_R1_CSR),CSR_IRQ_CL_P) ;
+				SMT_PANIC(smc,HWM_E0004,HWM_E0004_MSG) ;
+			}
+			if (is & IS_R1_C) {	/* Encoding error rx queue 1 */
+				/* clear IRQ */
+				outpd(ADDR(B4_R1_CSR),CSR_IRQ_CL_C) ;
+				SMT_PANIC(smc,HWM_E0005,HWM_E0005_MSG) ;
+			}
+			if (is & IS_XA_C) {	/* Encoding error async tx q */
+				/* clear IRQ */
+				outpd(ADDR(B5_XA_CSR),CSR_IRQ_CL_C) ;
+				SMT_PANIC(smc,HWM_E0006,HWM_E0006_MSG) ;
+			}
+			if (is & IS_XS_C) {	/* Encoding error sync tx q */
+				/* clear IRQ */
+				outpd(ADDR(B5_XS_CSR),CSR_IRQ_CL_C) ;
+				SMT_PANIC(smc,HWM_E0007,HWM_E0007_MSG) ;
+			}
+		}
+
+		/*
+		 *	Fast Tx complete Async/Sync Queue (BMU service)
+		 */
+		if (is & (IS_XS_F|IS_XA_F)) {
+			DB_GEN("Fast tx complete queue",0,0,6) ;
+			/*
+			 * clear IRQ, Note: no IRQ is lost, because
+			 * 	we always service both queues
+			 */
+			outpd(ADDR(B5_XS_CSR),CSR_IRQ_CL_F) ;
+			outpd(ADDR(B5_XA_CSR),CSR_IRQ_CL_F) ;
+			mac_drv_clear_txd(smc) ;
+			llc_restart_tx(smc) ;
+		}
+
+		/*
+		 *	Fast Rx Complete (BMU service)
+		 */
+		if (is & IS_R1_F) {
+			DB_GEN("Fast receive complete",0,0,6) ;
+			/* clear IRQ */
+#ifndef USE_BREAK_ISR
+			outpd(ADDR(B4_R1_CSR),CSR_IRQ_CL_F) ;
+			process_receive(smc) ;
+#else
+			process_receive(smc) ;
+			if (smc->os.hwm.leave_isr) {
+				force_irq = FALSE ;
+			} else {
+				outpd(ADDR(B4_R1_CSR),CSR_IRQ_CL_F) ;
+				process_receive(smc) ;
+			}
+#endif
+		}
+
+#ifndef	NDIS_OS2
+		while ((mb = get_llc_rx(smc))) {
+			smt_to_llc(smc,mb) ;
+		}
+#else
+		if (offDepth)
+			post_proc() ;
+
+		while (!offDepth && (mb = get_llc_rx(smc))) {
+			smt_to_llc(smc,mb) ;
+		}
+
+		if (!offDepth && smc->os.hwm.rx_break) {
+			process_receive(smc) ;
+		}
+#endif
+		if (smc->q.ev_get != smc->q.ev_put) {
+			NDD_TRACE("CH2a",0,0,0) ;
+			ev_dispatcher(smc) ;
+		}
+#ifdef	NDIS_OS2
+		post_proc() ;
+		if (offDepth) {		/* leave fddi_isr because */
+			break ;		/* indications not allowed */
+		}
+#endif
+#ifdef	USE_BREAK_ISR
+		if (smc->os.hwm.leave_isr) {
+			break ;		/* leave fddi_isr */
+		}
+#endif
+
+		/* NOTE: when the isr is left, no rx is pending */
+	}	/* end of interrupt source polling loop */
+
+#ifdef	USE_BREAK_ISR
+	if (smc->os.hwm.leave_isr && force_irq) {
+		smt_force_irq(smc) ;
+	}
+#endif
+	smc->os.hwm.isr_flag = FALSE ;
+	NDD_TRACE("CH0E",0,0,0) ;
+}
+
+
+/*
+	-------------------------------------------------------------
+	RECEIVE FUNCTIONS:
+	-------------------------------------------------------------
+*/
+
+#ifndef	NDIS_OS2
+/*
+ *	BEGIN_MANUAL_ENTRY(mac_drv_rx_mode)
+ *	void mac_drv_rx_mode(smc,mode)
+ *
+ * function	DOWNCALL	(fplus.c)
+ *		Corresponding to the parameter mode, the operating system
+ *		dependent module can activate several receive modes.
+ *
+ * para	mode	= 1:	RX_ENABLE_ALLMULTI	enable all multicasts
+ *		= 2:	RX_DISABLE_ALLMULTI	disable "enable all multicasts"
+ *		= 3:	RX_ENABLE_PROMISC	enable promiscuous
+ *		= 4:	RX_DISABLE_PROMISC	disable promiscuous
+ *		= 5:	RX_ENABLE_NSA		enable rec. of all NSA frames
+ *			(disabled after 'driver reset' & 'set station address')
+ *		= 6:	RX_DISABLE_NSA		disable rec. of all NSA frames
+ *
+ *		= 21:	RX_ENABLE_PASS_SMT	( see description )
+ *		= 22:	RX_DISABLE_PASS_SMT	(  "	   "	  )
+ *		= 23:	RX_ENABLE_PASS_NSA	(  "	   "	  )
+ *		= 24:	RX_DISABLE_PASS_NSA	(  "	   "	  )
+ *		= 25:	RX_ENABLE_PASS_DB	(  "	   "	  )
+ *		= 26:	RX_DISABLE_PASS_DB	(  "	   "	  )
+ *		= 27:	RX_DISABLE_PASS_ALL	(  "	   "	  )
+ *		= 28:	RX_DISABLE_LLC_PROMISC	(  "	   "	  )
+ *		= 29:	RX_ENABLE_LLC_PROMISC	(  "	   "	  )
+ *
+ *
+ *		RX_ENABLE_PASS_SMT / RX_DISABLE_PASS_SMT
+ *
+ *		If the operating system dependent module activates the
+ *		mode RX_ENABLE_PASS_SMT, the hardware module
+ *		duplicates all SMT frames with the frame control
+ *		FC_SMT_INFO and passes them to the LLC receive channel
+ *		by calling mac_drv_rx_init.
+ *		The SMT Frames which are sent by the local SMT and the NSA
+ *		frames whose A- and C-Indicator is not set are also duplicated
+ *		and passed.
+ *		The receive mode RX_DISABLE_PASS_SMT disables the passing
+ *		of SMT frames.
+ *
+ *		RX_ENABLE_PASS_NSA / RX_DISABLE_PASS_NSA
+ *
+ *		If the operating system dependent module activates the
+ *		mode RX_ENABLE_PASS_NSA, the hardware module
+ *		duplicates all NSA frames with frame control FC_SMT_NSA
+ *		and a set A-Indicator and passed them to the LLC
+ *		receive channel by calling mac_drv_rx_init.
+ *		All NSA Frames which are sent by the local SMT
+ *		are also duplicated and passed.
+ *		The receive mode RX_DISABLE_PASS_NSA disables the passing
+ *		of NSA frames with the A- or C-Indicator set.
+ *
+ * NOTE:	For fear that the hardware module receives NSA frames with
+ *		a reset A-Indicator, the operating system dependent module
+ *		has to call mac_drv_rx_mode with the mode RX_ENABLE_NSA
+ *		before activate the RX_ENABLE_PASS_NSA mode and after every
+ *		'driver reset' and 'set station address'.
+ *
+ *		RX_ENABLE_PASS_DB / RX_DISABLE_PASS_DB
+ *
+ *		If the operating system dependent module activates the
+ *		mode RX_ENABLE_PASS_DB, direct BEACON frames
+ *		(FC_BEACON frame control) are passed to the LLC receive
+ *		channel by mac_drv_rx_init.
+ *		The receive mode RX_DISABLE_PASS_DB disables the passing
+ *		of direct BEACON frames.
+ *
+ *		RX_DISABLE_PASS_ALL
+ *
+ *		Disables all special receives modes. It is equal to
+ *		call mac_drv_set_rx_mode successively with the
+ *		parameters RX_DISABLE_NSA, RX_DISABLE_PASS_SMT,
+ *		RX_DISABLE_PASS_NSA and RX_DISABLE_PASS_DB.
+ *
+ *		RX_ENABLE_LLC_PROMISC
+ *
+ *		(default) all received LLC frames and all SMT/NSA/DBEACON
+ *		frames depending on the attitude of the flags
+ *		PASS_SMT/PASS_NSA/PASS_DBEACON will be delivered to the
+ *		LLC layer
+ *
+ *		RX_DISABLE_LLC_PROMISC
+ *
+ *		all received SMT/NSA/DBEACON frames depending on the
+ *		attitude of the flags PASS_SMT/PASS_NSA/PASS_DBEACON
+ *		will be delivered to the LLC layer.
+ *		all received LLC frames with a directed address, Multicast
+ *		or Broadcast address will be delivered to the LLC
+ *		layer too.
+ *
+ *	END_MANUAL_ENTRY
+ */
+void mac_drv_rx_mode(struct s_smc *smc, int mode)
+{
+	switch(mode) {
+	case RX_ENABLE_PASS_SMT:
+		smc->os.hwm.pass_SMT = TRUE ;
+		break ;
+	case RX_DISABLE_PASS_SMT:
+		smc->os.hwm.pass_SMT = FALSE ;
+		break ;
+	case RX_ENABLE_PASS_NSA:
+		smc->os.hwm.pass_NSA = TRUE ;
+		break ;
+	case RX_DISABLE_PASS_NSA:
+		smc->os.hwm.pass_NSA = FALSE ;
+		break ;
+	case RX_ENABLE_PASS_DB:
+		smc->os.hwm.pass_DB = TRUE ;
+		break ;
+	case RX_DISABLE_PASS_DB:
+		smc->os.hwm.pass_DB = FALSE ;
+		break ;
+	case RX_DISABLE_PASS_ALL:
+		smc->os.hwm.pass_SMT = smc->os.hwm.pass_NSA = FALSE ;
+		smc->os.hwm.pass_DB = FALSE ;
+		smc->os.hwm.pass_llc_promisc = TRUE ;
+		mac_set_rx_mode(smc,RX_DISABLE_NSA) ;
+		break ;
+	case RX_DISABLE_LLC_PROMISC:
+		smc->os.hwm.pass_llc_promisc = FALSE ;
+		break ;
+	case RX_ENABLE_LLC_PROMISC:
+		smc->os.hwm.pass_llc_promisc = TRUE ;
+		break ;
+	case RX_ENABLE_ALLMULTI:
+	case RX_DISABLE_ALLMULTI:
+	case RX_ENABLE_PROMISC:
+	case RX_DISABLE_PROMISC:
+	case RX_ENABLE_NSA:
+	case RX_DISABLE_NSA:
+	default:
+		mac_set_rx_mode(smc,mode) ;
+		break ;
+	}
+}
+#endif	/* ifndef NDIS_OS2 */
+
+/*
+ * process receive queue
+ */
+void process_receive(struct s_smc *smc)
+{
+	int i ;
+	int n ;
+	int frag_count ;		/* number of RxDs of the curr rx buf */
+	int used_frags ;		/* number of RxDs of the curr frame */
+	struct s_smt_rx_queue *queue ;	/* points to the queue ctl struct */
+	struct s_smt_fp_rxd volatile *r ;	/* rxd pointer */
+	struct s_smt_fp_rxd volatile *rxd ;	/* first rxd of rx frame */
+	u_long rbctrl ;			/* receive buffer control word */
+	u_long rfsw ;			/* receive frame status word */
+	u_short rx_used ;
+	u_char far *virt ;
+	char far *data ;
+	SMbuf *mb ;
+	u_char fc ;			/* Frame control */
+	int len ;			/* Frame length */
+
+	smc->os.hwm.detec_count = 0 ;
+	queue = smc->hw.fp.rx[QUEUE_R1] ;
+	NDD_TRACE("RHxB",0,0,0) ;
+	for ( ; ; ) {
+		r = queue->rx_curr_get ;
+		rx_used = queue->rx_used ;
+		frag_count = 0 ;
+
+#ifdef	USE_BREAK_ISR
+		if (smc->os.hwm.leave_isr) {
+			goto rx_end ;
+		}
+#endif
+#ifdef	NDIS_OS2
+		if (offDepth) {
+			smc->os.hwm.rx_break = 1 ;
+			goto rx_end ;
+		}
+		smc->os.hwm.rx_break = 0 ;
+#endif
+#ifdef	ODI2
+		if (smc->os.hwm.rx_break) {
+			goto rx_end ;
+		}
+#endif
+		n = 0 ;
+		do {
+			DB_RX("Check RxD %x for OWN and EOF",(void *)r,0,5) ;
+			DRV_BUF_FLUSH(r,DDI_DMA_SYNC_FORCPU) ;
+			rbctrl = le32_to_cpu(CR_READ(r->rxd_rbctrl));
+
+			if (rbctrl & BMU_OWN) {
+				NDD_TRACE("RHxE",r,rfsw,rbctrl) ;
+				DB_RX("End of RxDs",0,0,4) ;
+				goto rx_end ;
+			}
+			/*
+			 * out of RxD detection
+			 */
+			if (!rx_used) {
+				SK_BREAK() ;
+				SMT_PANIC(smc,HWM_E0009,HWM_E0009_MSG) ;
+				/* Either we don't have an RxD or all
+				 * RxDs are filled. Therefore it's allowed
+				 * for to set the STOPPED flag */
+				smc->hw.hw_state = STOPPED ;
+				mac_drv_clear_rx_queue(smc) ;
+				smc->hw.hw_state = STARTED ;
+				mac_drv_fill_rxd(smc) ;
+				smc->os.hwm.detec_count = 0 ;
+				goto rx_end ;
+			}
+			rfsw = le32_to_cpu(r->rxd_rfsw) ;
+			if ((rbctrl & BMU_STF) != ((rbctrl & BMU_ST_BUF) <<5)) {
+				/*
+				 * The BMU_STF bit is deleted, 1 frame is
+				 * placed into more than 1 rx buffer
+				 *
+				 * skip frame by setting the rx len to 0
+				 *
+				 * if fragment count == 0
+				 *	The missing STF bit belongs to the
+				 *	current frame, search for the
+				 *	EOF bit to complete the frame
+				 * else
+				 *	the fragment belongs to the next frame,
+				 *	exit the loop and process the frame
+				 */
+				SK_BREAK() ;
+				rfsw = 0 ;
+				if (frag_count) {
+					break ;
+				}
+			}
+			n += rbctrl & 0xffff ;
+			r = r->rxd_next ;
+			frag_count++ ;
+			rx_used-- ;
+		} while (!(rbctrl & BMU_EOF)) ;
+		used_frags = frag_count ;
+		DB_RX("EOF set in RxD, used_frags = %d ",used_frags,0,5) ;
+
+		/* may be next 2 DRV_BUF_FLUSH() can be skipped, because */
+		/* BMU_ST_BUF will not be changed by the ASIC */
+		DRV_BUF_FLUSH(r,DDI_DMA_SYNC_FORCPU) ;
+		while (rx_used && !(r->rxd_rbctrl & cpu_to_le32(BMU_ST_BUF))) {
+			DB_RX("Check STF bit in %x",(void *)r,0,5) ;
+			r = r->rxd_next ;
+			DRV_BUF_FLUSH(r,DDI_DMA_SYNC_FORCPU) ;
+			frag_count++ ;
+			rx_used-- ;
+		}
+		DB_RX("STF bit found",0,0,5) ;
+
+		/*
+		 * The received frame is finished for the process receive
+		 */
+		rxd = queue->rx_curr_get ;
+		queue->rx_curr_get = r ;
+		queue->rx_free += frag_count ;
+		queue->rx_used = rx_used ;
+
+		/*
+		 * ASIC Errata no. 7 (STF - Bit Bug)
+		 */
+		rxd->rxd_rbctrl &= cpu_to_le32(~BMU_STF) ;
+
+		for (r=rxd, i=frag_count ; i ; r=r->rxd_next, i--){
+			DB_RX("dma_complete for RxD %x",(void *)r,0,5) ;
+			dma_complete(smc,(union s_fp_descr volatile *)r,DMA_WR);
+		}
+		smc->hw.fp.err_stats.err_valid++ ;
+		smc->mib.m[MAC0].fddiMACCopied_Ct++ ;
+
+		/* the length of the data including the FC */
+		len = (rfsw & RD_LENGTH) - 4 ;
+
+		DB_RX("frame length = %d",len,0,4) ;
+		/*
+		 * check the frame_length and all error flags
+		 */
+		if (rfsw & (RX_MSRABT|RX_FS_E|RX_FS_CRC|RX_FS_IMPL)){
+			if (rfsw & RD_S_MSRABT) {
+				DB_RX("Frame aborted by the FORMAC",0,0,2) ;
+				smc->hw.fp.err_stats.err_abort++ ;
+			}
+			/*
+			 * check frame status
+			 */
+			if (rfsw & RD_S_SEAC2) {
+				DB_RX("E-Indicator set",0,0,2) ;
+				smc->hw.fp.err_stats.err_e_indicator++ ;
+			}
+			if (rfsw & RD_S_SFRMERR) {
+				DB_RX("CRC error",0,0,2) ;
+				smc->hw.fp.err_stats.err_crc++ ;
+			}
+			if (rfsw & RX_FS_IMPL) {
+				DB_RX("Implementer frame",0,0,2) ;
+				smc->hw.fp.err_stats.err_imp_frame++ ;
+			}
+			goto abort_frame ;
+		}
+		if (len > FDDI_RAW_MTU-4) {
+			DB_RX("Frame too long error",0,0,2) ;
+			smc->hw.fp.err_stats.err_too_long++ ;
+			goto abort_frame ;
+		}
+		/*
+		 * SUPERNET 3 Bug: FORMAC delivers status words
+		 * of aborded frames to the BMU
+		 */
+		if (len <= 4) {
+			DB_RX("Frame length = 0",0,0,2) ;
+			goto abort_frame ;
+		}
+
+		if (len != (n-4)) {
+			DB_RX("BMU: rx len differs: [%d:%d]",len,n,4);
+			smc->os.hwm.rx_len_error++ ;
+			goto abort_frame ;
+		}
+
+		/*
+		 * Check SA == MA
+		 */
+		virt = (u_char far *) rxd->rxd_virt ;
+		DB_RX("FC = %x",*virt,0,2) ;
+		if (virt[12] == MA[5] &&
+		    virt[11] == MA[4] &&
+		    virt[10] == MA[3] &&
+		    virt[9] == MA[2] &&
+		    virt[8] == MA[1] &&
+		    (virt[7] & ~GROUP_ADDR_BIT) == MA[0]) {
+			goto abort_frame ;
+		}
+
+		/*
+		 * test if LLC frame
+		 */
+		if (rfsw & RX_FS_LLC) {
+			/*
+			 * if pass_llc_promisc is disable
+			 *	if DA != Multicast or Broadcast or DA!=MA
+			 *		abort the frame
+			 */
+			if (!smc->os.hwm.pass_llc_promisc) {
+				if(!(virt[1] & GROUP_ADDR_BIT)) {
+					if (virt[6] != MA[5] ||
+					    virt[5] != MA[4] ||
+					    virt[4] != MA[3] ||
+					    virt[3] != MA[2] ||
+					    virt[2] != MA[1] ||
+					    virt[1] != MA[0]) {
+						DB_RX("DA != MA and not multi- or broadcast",0,0,2) ;
+						goto abort_frame ;
+					}
+				}
+			}
+
+			/*
+			 * LLC frame received
+			 */
+			DB_RX("LLC - receive",0,0,4) ;
+			mac_drv_rx_complete(smc,rxd,frag_count,len) ;
+		}
+		else {
+			if (!(mb = smt_get_mbuf(smc))) {
+				smc->hw.fp.err_stats.err_no_buf++ ;
+				DB_RX("No SMbuf; receive terminated",0,0,4) ;
+				goto abort_frame ;
+			}
+			data = smtod(mb,char *) - 1 ;
+
+			/*
+			 * copy the frame into a SMT_MBuf
+			 */
+#ifdef USE_OS_CPY
+			hwm_cpy_rxd2mb(rxd,data,len) ;
+#else
+			for (r=rxd, i=used_frags ; i ; r=r->rxd_next, i--){
+				n = le32_to_cpu(r->rxd_rbctrl) & RD_LENGTH ;
+				DB_RX("cp SMT frame to mb: len = %d",n,0,6) ;
+				memcpy(data,r->rxd_virt,n) ;
+				data += n ;
+			}
+			data = smtod(mb,char *) - 1 ;
+#endif
+			fc = *(char *)mb->sm_data = *data ;
+			mb->sm_len = len - 1 ;		/* len - fc */
+			data++ ;
+
+			/*
+			 * SMT frame received
+			 */
+			switch(fc) {
+			case FC_SMT_INFO :
+				smc->hw.fp.err_stats.err_smt_frame++ ;
+				DB_RX("SMT frame received ",0,0,5) ;
+
+				if (smc->os.hwm.pass_SMT) {
+					DB_RX("pass SMT frame ",0,0,5) ;
+					mac_drv_rx_complete(smc, rxd,
+						frag_count,len) ;
+				}
+				else {
+					DB_RX("requeue RxD",0,0,5) ;
+					mac_drv_requeue_rxd(smc,rxd,frag_count);
+				}
+
+				smt_received_pack(smc,mb,(int)(rfsw>>25)) ;
+				break ;
+			case FC_SMT_NSA :
+				smc->hw.fp.err_stats.err_smt_frame++ ;
+				DB_RX("SMT frame received ",0,0,5) ;
+
+				/* if pass_NSA set pass the NSA frame or */
+				/* pass_SMT set and the A-Indicator */
+				/* is not set, pass the NSA frame */
+				if (smc->os.hwm.pass_NSA ||
+					(smc->os.hwm.pass_SMT &&
+					!(rfsw & A_INDIC))) {
+					DB_RX("pass SMT frame ",0,0,5) ;
+					mac_drv_rx_complete(smc, rxd,
+						frag_count,len) ;
+				}
+				else {
+					DB_RX("requeue RxD",0,0,5) ;
+					mac_drv_requeue_rxd(smc,rxd,frag_count);
+				}
+
+				smt_received_pack(smc,mb,(int)(rfsw>>25)) ;
+				break ;
+			case FC_BEACON :
+				if (smc->os.hwm.pass_DB) {
+					DB_RX("pass DB frame ",0,0,5) ;
+					mac_drv_rx_complete(smc, rxd,
+						frag_count,len) ;
+				}
+				else {
+					DB_RX("requeue RxD",0,0,5) ;
+					mac_drv_requeue_rxd(smc,rxd,frag_count);
+				}
+				smt_free_mbuf(smc,mb) ;
+				break ;
+			default :
+				/*
+				 * unknown FC abord the frame
+				 */
+				DB_RX("unknown FC error",0,0,2) ;
+				smt_free_mbuf(smc,mb) ;
+				DB_RX("requeue RxD",0,0,5) ;
+				mac_drv_requeue_rxd(smc,rxd,frag_count) ;
+				if ((fc & 0xf0) == FC_MAC)
+					smc->hw.fp.err_stats.err_mac_frame++ ;
+				else
+					smc->hw.fp.err_stats.err_imp_frame++ ;
+
+				break ;
+			}
+		}
+
+		DB_RX("next RxD is %x ",queue->rx_curr_get,0,3) ;
+		NDD_TRACE("RHx1",queue->rx_curr_get,0,0) ;
+
+		continue ;
+	/*--------------------------------------------------------------------*/
+abort_frame:
+		DB_RX("requeue RxD",0,0,5) ;
+		mac_drv_requeue_rxd(smc,rxd,frag_count) ;
+
+		DB_RX("next RxD is %x ",queue->rx_curr_get,0,3) ;
+		NDD_TRACE("RHx2",queue->rx_curr_get,0,0) ;
+	}
+rx_end:
+#ifdef	ALL_RX_COMPLETE
+	mac_drv_all_receives_complete(smc) ;
+#endif
+	return ;	/* lint bug: needs return detect end of function */
+}
+
+static void smt_to_llc(struct s_smc *smc, SMbuf *mb)
+{
+	u_char	fc ;
+
+	DB_RX("send a queued frame to the llc layer",0,0,4) ;
+	smc->os.hwm.r.len = mb->sm_len ;
+	smc->os.hwm.r.mb_pos = smtod(mb,char *) ;
+	fc = *smc->os.hwm.r.mb_pos ;
+	(void)mac_drv_rx_init(smc,(int)mb->sm_len,(int)fc,
+		smc->os.hwm.r.mb_pos,(int)mb->sm_len) ;
+	smt_free_mbuf(smc,mb) ;
+}
+
+/*
+ *	BEGIN_MANUAL_ENTRY(hwm_rx_frag)
+ *	void hwm_rx_frag(smc,virt,phys,len,frame_status)
+ *
+ * function	MACRO		(hardware module, hwmtm.h)
+ *		This function calls dma_master for preparing the
+ *		system hardware for the DMA transfer and initializes
+ *		the current RxD with the length and the physical and
+ *		virtual address of the fragment. Furthermore, it sets the
+ *		STF and EOF bits depending on the frame status byte,
+ *		switches the OWN flag of the RxD, so that it is owned by the
+ *		adapter and issues an rx_start.
+ *
+ * para	virt	virtual pointer to the fragment
+ *	len	the length of the fragment
+ *	frame_status	status of the frame, see design description
+ *
+ * NOTE:	It is possible to call this function with a fragment length
+ *		of zero.
+ *
+ *	END_MANUAL_ENTRY
+ */
+void hwm_rx_frag(struct s_smc *smc, char far *virt, u_long phys, int len,
+		 int frame_status)
+{
+	struct s_smt_fp_rxd volatile *r ;
+	__le32	rbctrl;
+
+	NDD_TRACE("RHfB",virt,len,frame_status) ;
+	DB_RX("hwm_rx_frag: len = %d, frame_status = %x\n",len,frame_status,2) ;
+	r = smc->hw.fp.rx_q[QUEUE_R1].rx_curr_put ;
+	r->rxd_virt = virt ;
+	r->rxd_rbadr = cpu_to_le32(phys) ;
+	rbctrl = cpu_to_le32( (((__u32)frame_status &
+		(FIRST_FRAG|LAST_FRAG))<<26) |
+		(((u_long) frame_status & FIRST_FRAG) << 21) |
+		BMU_OWN | BMU_CHECK | BMU_EN_IRQ_EOF | len) ;
+	r->rxd_rbctrl = rbctrl ;
+
+	DRV_BUF_FLUSH(r,DDI_DMA_SYNC_FORDEV) ;
+	outpd(ADDR(B0_R1_CSR),CSR_START) ;
+	smc->hw.fp.rx_q[QUEUE_R1].rx_free-- ;
+	smc->hw.fp.rx_q[QUEUE_R1].rx_used++ ;
+	smc->hw.fp.rx_q[QUEUE_R1].rx_curr_put = r->rxd_next ;
+	NDD_TRACE("RHfE",r,le32_to_cpu(r->rxd_rbadr),0) ;
+}
+
+/*
+ *	BEGINN_MANUAL_ENTRY(mac_drv_clear_rx_queue)
+ *
+ * void mac_drv_clear_rx_queue(smc)
+ * struct s_smc *smc ;
+ *
+ * function	DOWNCALL	(hardware module, hwmtm.c)
+ *		mac_drv_clear_rx_queue is called by the OS-specific module
+ *		after it has issued a card_stop.
+ *		In this case, the frames in the receive queue are obsolete and
+ *		should be removed. For removing mac_drv_clear_rx_queue
+ *		calls dma_master for each RxD and mac_drv_clear_rxd for each
+ *		receive buffer.
+ *
+ * NOTE:	calling sequence card_stop:
+ *		CLI_FBI(), card_stop(),
+ *		mac_drv_clear_tx_queue(), mac_drv_clear_rx_queue(),
+ *
+ * NOTE:	The caller is responsible that the BMUs are idle
+ *		when this function is called.
+ *
+ *	END_MANUAL_ENTRY
+ */
+void mac_drv_clear_rx_queue(struct s_smc *smc)
+{
+	struct s_smt_fp_rxd volatile *r ;
+	struct s_smt_fp_rxd volatile *next_rxd ;
+	struct s_smt_rx_queue *queue ;
+	int frag_count ;
+	int i ;
+
+	if (smc->hw.hw_state != STOPPED) {
+		SK_BREAK() ;
+		SMT_PANIC(smc,HWM_E0012,HWM_E0012_MSG) ;
+		return ;
+	}
+
+	queue = smc->hw.fp.rx[QUEUE_R1] ;
+	DB_RX("clear_rx_queue",0,0,5) ;
+
+	/*
+	 * dma_complete and mac_drv_clear_rxd for all RxDs / receive buffers
+	 */
+	r = queue->rx_curr_get ;
+	while (queue->rx_used) {
+		DRV_BUF_FLUSH(r,DDI_DMA_SYNC_FORCPU) ;
+		DB_RX("switch OWN bit of RxD 0x%x ",r,0,5) ;
+		r->rxd_rbctrl &= ~cpu_to_le32(BMU_OWN) ;
+		frag_count = 1 ;
+		DRV_BUF_FLUSH(r,DDI_DMA_SYNC_FORDEV) ;
+		r = r->rxd_next ;
+		DRV_BUF_FLUSH(r,DDI_DMA_SYNC_FORCPU) ;
+		while (r != queue->rx_curr_put &&
+			!(r->rxd_rbctrl & cpu_to_le32(BMU_ST_BUF))) {
+			DB_RX("Check STF bit in %x",(void *)r,0,5) ;
+			r->rxd_rbctrl &= ~cpu_to_le32(BMU_OWN) ;
+			DRV_BUF_FLUSH(r,DDI_DMA_SYNC_FORDEV) ;
+			r = r->rxd_next ;
+			DRV_BUF_FLUSH(r,DDI_DMA_SYNC_FORCPU) ;
+			frag_count++ ;
+		}
+		DB_RX("STF bit found",0,0,5) ;
+		next_rxd = r ;
+
+		for (r=queue->rx_curr_get,i=frag_count; i ; r=r->rxd_next,i--){
+			DB_RX("dma_complete for RxD %x",(void *)r,0,5) ;
+			dma_complete(smc,(union s_fp_descr volatile *)r,DMA_WR);
+		}
+
+		DB_RX("mac_drv_clear_rxd: RxD %x frag_count %d ",
+			(void *)queue->rx_curr_get,frag_count,5) ;
+		mac_drv_clear_rxd(smc,queue->rx_curr_get,frag_count) ;
+
+		queue->rx_curr_get = next_rxd ;
+		queue->rx_used -= frag_count ;
+		queue->rx_free += frag_count ;
+	}
+}
+
+
+/*
+	-------------------------------------------------------------
+	SEND FUNCTIONS:
+	-------------------------------------------------------------
+*/
+
+/*
+ *	BEGIN_MANUAL_ENTRY(hwm_tx_init)
+ *	int hwm_tx_init(smc,fc,frag_count,frame_len,frame_status)
+ *
+ * function	DOWN_CALL	(hardware module, hwmtm.c)
+ *		hwm_tx_init checks if the frame can be sent through the
+ *		corresponding send queue.
+ *
+ * para	fc	the frame control. To determine through which
+ *		send queue the frame should be transmitted.
+ *		0x50 - 0x57:	asynchronous LLC frame
+ *		0xD0 - 0xD7:	synchronous LLC frame
+ *		0x41, 0x4F:	SMT frame to the network
+ *		0x42:		SMT frame to the network and to the local SMT
+ *		0x43:		SMT frame to the local SMT
+ *	frag_count	count of the fragments for this frame
+ *	frame_len	length of the frame
+ *	frame_status	status of the frame, the send queue bit is already
+ *			specified
+ *
+ * return		frame_status
+ *
+ *	END_MANUAL_ENTRY
+ */
+int hwm_tx_init(struct s_smc *smc, u_char fc, int frag_count, int frame_len,
+		int frame_status)
+{
+	NDD_TRACE("THiB",fc,frag_count,frame_len) ;
+	smc->os.hwm.tx_p = smc->hw.fp.tx[frame_status & QUEUE_A0] ;
+	smc->os.hwm.tx_descr = TX_DESCRIPTOR | (((u_long)(frame_len-1)&3)<<27) ;
+	smc->os.hwm.tx_len = frame_len ;
+	DB_TX("hwm_tx_init: fc = %x, len = %d",fc,frame_len,3) ;
+	if ((fc & ~(FC_SYNC_BIT|FC_LLC_PRIOR)) == FC_ASYNC_LLC) {
+		frame_status |= LAN_TX ;
+	}
+	else {
+		switch (fc) {
+		case FC_SMT_INFO :
+		case FC_SMT_NSA :
+			frame_status |= LAN_TX ;
+			break ;
+		case FC_SMT_LOC :
+			frame_status |= LOC_TX ;
+			break ;
+		case FC_SMT_LAN_LOC :
+			frame_status |= LAN_TX | LOC_TX ;
+			break ;
+		default :
+			SMT_PANIC(smc,HWM_E0010,HWM_E0010_MSG) ;
+		}
+	}
+	if (!smc->hw.mac_ring_is_up) {
+		frame_status &= ~LAN_TX ;
+		frame_status |= RING_DOWN ;
+		DB_TX("Ring is down: terminate LAN_TX",0,0,2) ;
+	}
+	if (frag_count > smc->os.hwm.tx_p->tx_free) {
+#ifndef	NDIS_OS2
+		mac_drv_clear_txd(smc) ;
+		if (frag_count > smc->os.hwm.tx_p->tx_free) {
+			DB_TX("Out of TxDs, terminate LAN_TX",0,0,2) ;
+			frame_status &= ~LAN_TX ;
+			frame_status |= OUT_OF_TXD ;
+		}
+#else
+		DB_TX("Out of TxDs, terminate LAN_TX",0,0,2) ;
+		frame_status &= ~LAN_TX ;
+		frame_status |= OUT_OF_TXD ;
+#endif
+	}
+	DB_TX("frame_status = %x",frame_status,0,3) ;
+	NDD_TRACE("THiE",frame_status,smc->os.hwm.tx_p->tx_free,0) ;
+	return frame_status;
+}
+
+/*
+ *	BEGIN_MANUAL_ENTRY(hwm_tx_frag)
+ *	void hwm_tx_frag(smc,virt,phys,len,frame_status)
+ *
+ * function	DOWNCALL	(hardware module, hwmtm.c)
+ *		If the frame should be sent to the LAN, this function calls
+ *		dma_master, fills the current TxD with the virtual and the
+ *		physical address, sets the STF and EOF bits dependent on
+ *		the frame status, and requests the BMU to start the
+ *		transmit.
+ *		If the frame should be sent to the local SMT, an SMT_MBuf
+ *		is allocated if the FIRST_FRAG bit is set in the frame_status.
+ *		The fragment of the frame is copied into the SMT MBuf.
+ *		The function smt_received_pack is called if the LAST_FRAG
+ *		bit is set in the frame_status word.
+ *
+ * para	virt	virtual pointer to the fragment
+ *	len	the length of the fragment
+ *	frame_status	status of the frame, see design description
+ *
+ * return	nothing returned, no parameter is modified
+ *
+ * NOTE:	It is possible to invoke this macro with a fragment length
+ *		of zero.
+ *
+ *	END_MANUAL_ENTRY
+ */
+void hwm_tx_frag(struct s_smc *smc, char far *virt, u_long phys, int len,
+		 int frame_status)
+{
+	struct s_smt_fp_txd volatile *t ;
+	struct s_smt_tx_queue *queue ;
+	__le32	tbctrl ;
+
+	queue = smc->os.hwm.tx_p ;
+
+	NDD_TRACE("THfB",virt,len,frame_status) ;
+	/* Bug fix: AF / May 31 1999 (#missing)
+	 * snmpinfo problem reported by IBM is caused by invalid
+	 * t-pointer (txd) if LAN_TX is not set but LOC_TX only.
+	 * Set: t = queue->tx_curr_put  here !
+	 */
+	t = queue->tx_curr_put ;
+
+	DB_TX("hwm_tx_frag: len = %d, frame_status = %x ",len,frame_status,2) ;
+	if (frame_status & LAN_TX) {
+		/* '*t' is already defined */
+		DB_TX("LAN_TX: TxD = %x, virt = %x ",t,virt,3) ;
+		t->txd_virt = virt ;
+		t->txd_txdscr = cpu_to_le32(smc->os.hwm.tx_descr) ;
+		t->txd_tbadr = cpu_to_le32(phys) ;
+		tbctrl = cpu_to_le32((((__u32)frame_status &
+			(FIRST_FRAG|LAST_FRAG|EN_IRQ_EOF))<< 26) |
+			BMU_OWN|BMU_CHECK |len) ;
+		t->txd_tbctrl = tbctrl ;
+
+#ifndef	AIX
+		DRV_BUF_FLUSH(t,DDI_DMA_SYNC_FORDEV) ;
+		outpd(queue->tx_bmu_ctl,CSR_START) ;
+#else	/* ifndef AIX */
+		DRV_BUF_FLUSH(t,DDI_DMA_SYNC_FORDEV) ;
+		if (frame_status & QUEUE_A0) {
+			outpd(ADDR(B0_XA_CSR),CSR_START) ;
+		}
+		else {
+			outpd(ADDR(B0_XS_CSR),CSR_START) ;
+		}
+#endif
+		queue->tx_free-- ;
+		queue->tx_used++ ;
+		queue->tx_curr_put = t->txd_next ;
+		if (frame_status & LAST_FRAG) {
+			smc->mib.m[MAC0].fddiMACTransmit_Ct++ ;
+		}
+	}
+	if (frame_status & LOC_TX) {
+		DB_TX("LOC_TX: ",0,0,3) ;
+		if (frame_status & FIRST_FRAG) {
+			if(!(smc->os.hwm.tx_mb = smt_get_mbuf(smc))) {
+				smc->hw.fp.err_stats.err_no_buf++ ;
+				DB_TX("No SMbuf; transmit terminated",0,0,4) ;
+			}
+			else {
+				smc->os.hwm.tx_data =
+					smtod(smc->os.hwm.tx_mb,char *) - 1 ;
+#ifdef USE_OS_CPY
+#ifdef PASS_1ST_TXD_2_TX_COMP
+				hwm_cpy_txd2mb(t,smc->os.hwm.tx_data,
+					smc->os.hwm.tx_len) ;
+#endif
+#endif
+			}
+		}
+		if (smc->os.hwm.tx_mb) {
+#ifndef	USE_OS_CPY
+			DB_TX("copy fragment into MBuf ",0,0,3) ;
+			memcpy(smc->os.hwm.tx_data,virt,len) ;
+			smc->os.hwm.tx_data += len ;
+#endif
+			if (frame_status & LAST_FRAG) {
+#ifdef	USE_OS_CPY
+#ifndef PASS_1ST_TXD_2_TX_COMP
+				/*
+				 * hwm_cpy_txd2mb(txd,data,len) copies 'len' 
+				 * bytes from the virtual pointer in 'rxd'
+				 * to 'data'. The virtual pointer of the 
+				 * os-specific tx-buffer should be written
+				 * in the LAST txd.
+				 */ 
+				hwm_cpy_txd2mb(t,smc->os.hwm.tx_data,
+					smc->os.hwm.tx_len) ;
+#endif	/* nPASS_1ST_TXD_2_TX_COMP */
+#endif	/* USE_OS_CPY */
+				smc->os.hwm.tx_data =
+					smtod(smc->os.hwm.tx_mb,char *) - 1 ;
+				*(char *)smc->os.hwm.tx_mb->sm_data =
+					*smc->os.hwm.tx_data ;
+				smc->os.hwm.tx_data++ ;
+				smc->os.hwm.tx_mb->sm_len =
+					smc->os.hwm.tx_len - 1 ;
+				DB_TX("pass LLC frame to SMT ",0,0,3) ;
+				smt_received_pack(smc,smc->os.hwm.tx_mb,
+						RD_FS_LOCAL) ;
+			}
+		}
+	}
+	NDD_TRACE("THfE",t,queue->tx_free,0) ;
+}
+
+
+/*
+ * queues a receive for later send
+ */
+static void queue_llc_rx(struct s_smc *smc, SMbuf *mb)
+{
+	DB_GEN("queue_llc_rx: mb = %x",(void *)mb,0,4) ;
+	smc->os.hwm.queued_rx_frames++ ;
+	mb->sm_next = (SMbuf *)NULL ;
+	if (smc->os.hwm.llc_rx_pipe == NULL) {
+		smc->os.hwm.llc_rx_pipe = mb ;
+	}
+	else {
+		smc->os.hwm.llc_rx_tail->sm_next = mb ;
+	}
+	smc->os.hwm.llc_rx_tail = mb ;
+
+	/*
+	 * force an timer IRQ to receive the data
+	 */
+	if (!smc->os.hwm.isr_flag) {
+		smt_force_irq(smc) ;
+	}
+}
+
+/*
+ * get a SMbuf from the llc_rx_queue
+ */
+static SMbuf *get_llc_rx(struct s_smc *smc)
+{
+	SMbuf	*mb ;
+
+	if ((mb = smc->os.hwm.llc_rx_pipe)) {
+		smc->os.hwm.queued_rx_frames-- ;
+		smc->os.hwm.llc_rx_pipe = mb->sm_next ;
+	}
+	DB_GEN("get_llc_rx: mb = 0x%x",(void *)mb,0,4) ;
+	return mb;
+}
+
+/*
+ * queues a transmit SMT MBuf during the time were the MBuf is
+ * queued the TxD ring
+ */
+static void queue_txd_mb(struct s_smc *smc, SMbuf *mb)
+{
+	DB_GEN("_rx: queue_txd_mb = %x",(void *)mb,0,4) ;
+	smc->os.hwm.queued_txd_mb++ ;
+	mb->sm_next = (SMbuf *)NULL ;
+	if (smc->os.hwm.txd_tx_pipe == NULL) {
+		smc->os.hwm.txd_tx_pipe = mb ;
+	}
+	else {
+		smc->os.hwm.txd_tx_tail->sm_next = mb ;
+	}
+	smc->os.hwm.txd_tx_tail = mb ;
+}
+
+/*
+ * get a SMbuf from the txd_tx_queue
+ */
+static SMbuf *get_txd_mb(struct s_smc *smc)
+{
+	SMbuf *mb ;
+
+	if ((mb = smc->os.hwm.txd_tx_pipe)) {
+		smc->os.hwm.queued_txd_mb-- ;
+		smc->os.hwm.txd_tx_pipe = mb->sm_next ;
+	}
+	DB_GEN("get_txd_mb: mb = 0x%x",(void *)mb,0,4) ;
+	return mb;
+}
+
+/*
+ *	SMT Send function
+ */
+void smt_send_mbuf(struct s_smc *smc, SMbuf *mb, int fc)
+{
+	char far *data ;
+	int	len ;
+	int	n ;
+	int	i ;
+	int	frag_count ;
+	int	frame_status ;
+	SK_LOC_DECL(char far,*virt[3]) ;
+	int	frag_len[3] ;
+	struct s_smt_tx_queue *queue ;
+	struct s_smt_fp_txd volatile *t ;
+	u_long	phys ;
+	__le32	tbctrl;
+
+	NDD_TRACE("THSB",mb,fc,0) ;
+	DB_TX("smt_send_mbuf: mb = 0x%x, fc = 0x%x",mb,fc,4) ;
+
+	mb->sm_off-- ;	/* set to fc */
+	mb->sm_len++ ;	/* + fc */
+	data = smtod(mb,char *) ;
+	*data = fc ;
+	if (fc == FC_SMT_LOC)
+		*data = FC_SMT_INFO ;
+
+	/*
+	 * determine the frag count and the virt addresses of the frags
+	 */
+	frag_count = 0 ;
+	len = mb->sm_len ;
+	while (len) {
+		n = SMT_PAGESIZE - ((long)data & (SMT_PAGESIZE-1)) ;
+		if (n >= len) {
+			n = len ;
+		}
+		DB_TX("frag: virt/len = 0x%x/%d ",(void *)data,n,5) ;
+		virt[frag_count] = data ;
+		frag_len[frag_count] = n ;
+		frag_count++ ;
+		len -= n ;
+		data += n ;
+	}
+
+	/*
+	 * determine the frame status
+	 */
+	queue = smc->hw.fp.tx[QUEUE_A0] ;
+	if (fc == FC_BEACON || fc == FC_SMT_LOC) {
+		frame_status = LOC_TX ;
+	}
+	else {
+		frame_status = LAN_TX ;
+		if ((smc->os.hwm.pass_NSA &&(fc == FC_SMT_NSA)) ||
+		   (smc->os.hwm.pass_SMT &&(fc == FC_SMT_INFO)))
+			frame_status |= LOC_TX ;
+	}
+
+	if (!smc->hw.mac_ring_is_up || frag_count > queue->tx_free) {
+		frame_status &= ~LAN_TX;
+		if (frame_status) {
+			DB_TX("Ring is down: terminate LAN_TX",0,0,2) ;
+		}
+		else {
+			DB_TX("Ring is down: terminate transmission",0,0,2) ;
+			smt_free_mbuf(smc,mb) ;
+			return ;
+		}
+	}
+	DB_TX("frame_status = 0x%x ",frame_status,0,5) ;
+
+	if ((frame_status & LAN_TX) && (frame_status & LOC_TX)) {
+		mb->sm_use_count = 2 ;
+	}
+
+	if (frame_status & LAN_TX) {
+		t = queue->tx_curr_put ;
+		frame_status |= FIRST_FRAG ;
+		for (i = 0; i < frag_count; i++) {
+			DB_TX("init TxD = 0x%x",(void *)t,0,5) ;
+			if (i == frag_count-1) {
+				frame_status |= LAST_FRAG ;
+				t->txd_txdscr = cpu_to_le32(TX_DESCRIPTOR |
+					(((__u32)(mb->sm_len-1)&3) << 27)) ;
+			}
+			t->txd_virt = virt[i] ;
+			phys = dma_master(smc, (void far *)virt[i],
+				frag_len[i], DMA_RD|SMT_BUF) ;
+			t->txd_tbadr = cpu_to_le32(phys) ;
+			tbctrl = cpu_to_le32((((__u32)frame_status &
+				(FIRST_FRAG|LAST_FRAG)) << 26) |
+				BMU_OWN | BMU_CHECK | BMU_SMT_TX |frag_len[i]) ;
+			t->txd_tbctrl = tbctrl ;
+#ifndef	AIX
+			DRV_BUF_FLUSH(t,DDI_DMA_SYNC_FORDEV) ;
+			outpd(queue->tx_bmu_ctl,CSR_START) ;
+#else
+			DRV_BUF_FLUSH(t,DDI_DMA_SYNC_FORDEV) ;
+			outpd(ADDR(B0_XA_CSR),CSR_START) ;
+#endif
+			frame_status &= ~FIRST_FRAG ;
+			queue->tx_curr_put = t = t->txd_next ;
+			queue->tx_free-- ;
+			queue->tx_used++ ;
+		}
+		smc->mib.m[MAC0].fddiMACTransmit_Ct++ ;
+		queue_txd_mb(smc,mb) ;
+	}
+
+	if (frame_status & LOC_TX) {
+		DB_TX("pass Mbuf to LLC queue",0,0,5) ;
+		queue_llc_rx(smc,mb) ;
+	}
+
+	/*
+	 * We need to unqueue the free SMT_MBUFs here, because it may
+	 * be that the SMT want's to send more than 1 frame for one down call
+	 */
+	mac_drv_clear_txd(smc) ;
+	NDD_TRACE("THSE",t,queue->tx_free,frag_count) ;
+}
+
+/*	BEGIN_MANUAL_ENTRY(mac_drv_clear_txd)
+ *	void mac_drv_clear_txd(smc)
+ *
+ * function	DOWNCALL	(hardware module, hwmtm.c)
+ *		mac_drv_clear_txd searches in both send queues for TxD's
+ *		which were finished by the adapter. It calls dma_complete
+ *		for each TxD. If the last fragment of an LLC frame is
+ *		reached, it calls mac_drv_tx_complete to release the
+ *		send buffer.
+ *
+ * return	nothing
+ *
+ *	END_MANUAL_ENTRY
+ */
+static void mac_drv_clear_txd(struct s_smc *smc)
+{
+	struct s_smt_tx_queue *queue ;
+	struct s_smt_fp_txd volatile *t1 ;
+	struct s_smt_fp_txd volatile *t2 = NULL ;
+	SMbuf *mb ;
+	u_long	tbctrl ;
+	int i ;
+	int frag_count ;
+	int n ;
+
+	NDD_TRACE("THcB",0,0,0) ;
+	for (i = QUEUE_S; i <= QUEUE_A0; i++) {
+		queue = smc->hw.fp.tx[i] ;
+		t1 = queue->tx_curr_get ;
+		DB_TX("clear_txd: QUEUE = %d (0=sync/1=async)",i,0,5) ;
+
+		for ( ; ; ) {
+			frag_count = 0 ;
+
+			do {
+				DRV_BUF_FLUSH(t1,DDI_DMA_SYNC_FORCPU) ;
+				DB_TX("check OWN/EOF bit of TxD 0x%x",t1,0,5) ;
+				tbctrl = le32_to_cpu(CR_READ(t1->txd_tbctrl));
+
+				if (tbctrl & BMU_OWN || !queue->tx_used){
+					DB_TX("End of TxDs queue %d",i,0,4) ;
+					goto free_next_queue ;	/* next queue */
+				}
+				t1 = t1->txd_next ;
+				frag_count++ ;
+			} while (!(tbctrl & BMU_EOF)) ;
+
+			t1 = queue->tx_curr_get ;
+			for (n = frag_count; n; n--) {
+				tbctrl = le32_to_cpu(t1->txd_tbctrl) ;
+				dma_complete(smc,
+					(union s_fp_descr volatile *) t1,
+					(int) (DMA_RD |
+					((tbctrl & BMU_SMT_TX) >> 18))) ;
+				t2 = t1 ;
+				t1 = t1->txd_next ;
+			}
+
+			if (tbctrl & BMU_SMT_TX) {
+				mb = get_txd_mb(smc) ;
+				smt_free_mbuf(smc,mb) ;
+			}
+			else {
+#ifndef PASS_1ST_TXD_2_TX_COMP
+				DB_TX("mac_drv_tx_comp for TxD 0x%x",t2,0,4) ;
+				mac_drv_tx_complete(smc,t2) ;
+#else
+				DB_TX("mac_drv_tx_comp for TxD 0x%x",
+					queue->tx_curr_get,0,4) ;
+				mac_drv_tx_complete(smc,queue->tx_curr_get) ;
+#endif
+			}
+			queue->tx_curr_get = t1 ;
+			queue->tx_free += frag_count ;
+			queue->tx_used -= frag_count ;
+		}
+free_next_queue: ;
+	}
+	NDD_TRACE("THcE",0,0,0) ;
+}
+
+/*
+ *	BEGINN_MANUAL_ENTRY(mac_drv_clear_tx_queue)
+ *
+ * void mac_drv_clear_tx_queue(smc)
+ * struct s_smc *smc ;
+ *
+ * function	DOWNCALL	(hardware module, hwmtm.c)
+ *		mac_drv_clear_tx_queue is called from the SMT when
+ *		the RMT state machine has entered the ISOLATE state.
+ *		This function is also called by the os-specific module
+ *		after it has called the function card_stop().
+ *		In this case, the frames in the send queues are obsolete and
+ *		should be removed.
+ *
+ * note		calling sequence:
+ *		CLI_FBI(), card_stop(),
+ *		mac_drv_clear_tx_queue(), mac_drv_clear_rx_queue(),
+ *
+ * NOTE:	The caller is responsible that the BMUs are idle
+ *		when this function is called.
+ *
+ *	END_MANUAL_ENTRY
+ */
+void mac_drv_clear_tx_queue(struct s_smc *smc)
+{
+	struct s_smt_fp_txd volatile *t ;
+	struct s_smt_tx_queue *queue ;
+	int tx_used ;
+	int i ;
+
+	if (smc->hw.hw_state != STOPPED) {
+		SK_BREAK() ;
+		SMT_PANIC(smc,HWM_E0011,HWM_E0011_MSG) ;
+		return ;
+	}
+
+	for (i = QUEUE_S; i <= QUEUE_A0; i++) {
+		queue = smc->hw.fp.tx[i] ;
+		DB_TX("clear_tx_queue: QUEUE = %d (0=sync/1=async)",i,0,5) ;
+
+		/*
+		 * switch the OWN bit of all pending frames to the host
+		 */
+		t = queue->tx_curr_get ;
+		tx_used = queue->tx_used ;
+		while (tx_used) {
+			DRV_BUF_FLUSH(t,DDI_DMA_SYNC_FORCPU) ;
+			DB_TX("switch OWN bit of TxD 0x%x ",t,0,5) ;
+			t->txd_tbctrl &= ~cpu_to_le32(BMU_OWN) ;
+			DRV_BUF_FLUSH(t,DDI_DMA_SYNC_FORDEV) ;
+			t = t->txd_next ;
+			tx_used-- ;
+		}
+	}
+
+	/*
+	 * release all TxD's for both send queues
+	 */
+	mac_drv_clear_txd(smc) ;
+
+	for (i = QUEUE_S; i <= QUEUE_A0; i++) {
+		queue = smc->hw.fp.tx[i] ;
+		t = queue->tx_curr_get ;
+
+		/*
+		 * write the phys pointer of the NEXT descriptor into the
+		 * BMU's current address descriptor pointer and set
+		 * tx_curr_get and tx_curr_put to this position
+		 */
+		if (i == QUEUE_S) {
+			outpd(ADDR(B5_XS_DA),le32_to_cpu(t->txd_ntdadr)) ;
+		}
+		else {
+			outpd(ADDR(B5_XA_DA),le32_to_cpu(t->txd_ntdadr)) ;
+		}
+
+		queue->tx_curr_put = queue->tx_curr_get->txd_next ;
+		queue->tx_curr_get = queue->tx_curr_put ;
+	}
+}
+
+
+/*
+	-------------------------------------------------------------
+	TEST FUNCTIONS:
+	-------------------------------------------------------------
+*/
+
+#ifdef	DEBUG
+/*
+ *	BEGIN_MANUAL_ENTRY(mac_drv_debug_lev)
+ *	void mac_drv_debug_lev(smc,flag,lev)
+ *
+ * function	DOWNCALL	(drvsr.c)
+ *		To get a special debug info the user can assign a debug level
+ *		to any debug flag.
+ *
+ * para	flag	debug flag, possible values are:
+ *			= 0:	reset all debug flags (the defined level is
+ *				ignored)
+ *			= 1:	debug.d_smtf
+ *			= 2:	debug.d_smt
+ *			= 3:	debug.d_ecm
+ *			= 4:	debug.d_rmt
+ *			= 5:	debug.d_cfm
+ *			= 6:	debug.d_pcm
+ *
+ *			= 10:	debug.d_os.hwm_rx (hardware module receive path)
+ *			= 11:	debug.d_os.hwm_tx(hardware module transmit path)
+ *			= 12:	debug.d_os.hwm_gen(hardware module general flag)
+ *
+ *	lev	debug level
+ *
+ *	END_MANUAL_ENTRY
+ */
+void mac_drv_debug_lev(struct s_smc *smc, int flag, int lev)
+{
+	switch(flag) {
+	case (int)NULL:
+		DB_P.d_smtf = DB_P.d_smt = DB_P.d_ecm = DB_P.d_rmt = 0 ;
+		DB_P.d_cfm = 0 ;
+		DB_P.d_os.hwm_rx = DB_P.d_os.hwm_tx = DB_P.d_os.hwm_gen = 0 ;
+#ifdef	SBA
+		DB_P.d_sba = 0 ;
+#endif
+#ifdef	ESS
+		DB_P.d_ess = 0 ;
+#endif
+		break ;
+	case DEBUG_SMTF:
+		DB_P.d_smtf = lev ;
+		break ;
+	case DEBUG_SMT:
+		DB_P.d_smt = lev ;
+		break ;
+	case DEBUG_ECM:
+		DB_P.d_ecm = lev ;
+		break ;
+	case DEBUG_RMT:
+		DB_P.d_rmt = lev ;
+		break ;
+	case DEBUG_CFM:
+		DB_P.d_cfm = lev ;
+		break ;
+	case DEBUG_PCM:
+		DB_P.d_pcm = lev ;
+		break ;
+	case DEBUG_SBA:
+#ifdef	SBA
+		DB_P.d_sba = lev ;
+#endif
+		break ;
+	case DEBUG_ESS:
+#ifdef	ESS
+		DB_P.d_ess = lev ;
+#endif
+		break ;
+	case DB_HWM_RX:
+		DB_P.d_os.hwm_rx = lev ;
+		break ;
+	case DB_HWM_TX:
+		DB_P.d_os.hwm_tx = lev ;
+		break ;
+	case DB_HWM_GEN:
+		DB_P.d_os.hwm_gen = lev ;
+		break ;
+	default:
+		break ;
+	}
+}
+#endif
diff --git a/drivers/net/fddi/skfp/hwt.c b/drivers/net/fddi/skfp/hwt.c
new file mode 100644
index 0000000..c0798fd
--- /dev/null
+++ b/drivers/net/fddi/skfp/hwt.c
@@ -0,0 +1,269 @@
+/******************************************************************************
+ *
+ *	(C)Copyright 1998,1999 SysKonnect,
+ *	a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ *	See the file "skfddi.c" for further information.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+ * Timer Driver for FBI board (timer chip 82C54)
+ */
+
+/*
+ * Modifications:
+ *
+ *	28-Jun-1994 sw	Edit v1.6.
+ *			MCA: Added support for the SK-NET FDDI-FM2 adapter. The
+ *			 following functions have been added(+) or modified(*):
+ *			 hwt_start(*), hwt_stop(*), hwt_restart(*), hwt_read(*)
+ */
+
+#include "h/types.h"
+#include "h/fddi.h"
+#include "h/smc.h"
+
+#ifndef	lint
+static const char ID_sccs[] = "@(#)hwt.c	1.13 97/04/23 (C) SK " ;
+#endif
+
+/*
+ * Prototypes of local functions.
+ */
+/* 28-Jun-1994 sw - Note: hwt_restart() is also used in module 'drvfbi.c'. */
+/*static void hwt_restart() ; */
+
+/************************
+ *
+ *	hwt_start
+ *
+ *	Start hardware timer (clock ticks are 16us).
+ *
+ *	void hwt_start(
+ *		struct s_smc *smc,
+ *		u_long time) ;
+ * In
+ *	smc - A pointer to the SMT Context structure.
+ *
+ *	time - The time in units of 16us to load the timer with.
+ * Out
+ *	Nothing.
+ *
+ ************************/
+#define	HWT_MAX	(65000)
+
+void hwt_start(struct s_smc *smc, u_long time)
+{
+	u_short	cnt ;
+
+	if (time > HWT_MAX)
+		time = HWT_MAX ;
+
+	smc->hw.t_start = time ;
+	smc->hw.t_stop = 0L ;
+
+	cnt = (u_short)time ;
+	/*
+	 * if time < 16 us
+	 *	time = 16 us
+	 */
+	if (!cnt)
+		cnt++ ;
+
+	outpd(ADDR(B2_TI_INI), (u_long) cnt * 200) ;	/* Load timer value. */
+	outpw(ADDR(B2_TI_CRTL), TIM_START) ;		/* Start timer. */
+
+	smc->hw.timer_activ = TRUE ;
+}
+
+/************************
+ *
+ *	hwt_stop
+ *
+ *	Stop hardware timer.
+ *
+ *	void hwt_stop(
+ *		struct s_smc *smc) ;
+ * In
+ *	smc - A pointer to the SMT Context structure.
+ * Out
+ *	Nothing.
+ *
+ ************************/
+void hwt_stop(struct s_smc *smc)
+{
+	outpw(ADDR(B2_TI_CRTL), TIM_STOP) ;
+	outpw(ADDR(B2_TI_CRTL), TIM_CL_IRQ) ;
+
+	smc->hw.timer_activ = FALSE ;
+}
+
+/************************
+ *
+ *	hwt_init
+ *
+ *	Initialize hardware timer.
+ *
+ *	void hwt_init(
+ *		struct s_smc *smc) ;
+ * In
+ *	smc - A pointer to the SMT Context structure.
+ * Out
+ *	Nothing.
+ *
+ ************************/
+void hwt_init(struct s_smc *smc)
+{
+	smc->hw.t_start = 0 ;
+	smc->hw.t_stop	= 0 ;
+	smc->hw.timer_activ = FALSE ;
+
+	hwt_restart(smc) ;
+}
+
+/************************
+ *
+ *	hwt_restart
+ *
+ *	Clear timer interrupt.
+ *
+ *	void hwt_restart(
+ *		struct s_smc *smc) ;
+ * In
+ *	smc - A pointer to the SMT Context structure.
+ * Out
+ *	Nothing.
+ *
+ ************************/
+void hwt_restart(struct s_smc *smc)
+{
+	hwt_stop(smc) ;
+}
+
+/************************
+ *
+ *	hwt_read
+ *
+ *	Stop hardware timer and read time elapsed since last start.
+ *
+ *	u_long hwt_read(smc) ;
+ * In
+ *	smc - A pointer to the SMT Context structure.
+ * Out
+ *	The elapsed time since last start in units of 16us.
+ *
+ ************************/
+u_long hwt_read(struct s_smc *smc)
+{
+	u_short	tr ;
+	u_long	is ;
+
+	if (smc->hw.timer_activ) {
+		hwt_stop(smc) ;
+		tr = (u_short)((inpd(ADDR(B2_TI_VAL))/200) & 0xffff) ;
+
+		is = GET_ISR() ;
+		/* Check if timer expired (or wraparound). */
+		if ((tr > smc->hw.t_start) || (is & IS_TIMINT)) {
+			hwt_restart(smc) ;
+			smc->hw.t_stop = smc->hw.t_start ;
+		}
+		else
+			smc->hw.t_stop = smc->hw.t_start - tr ;
+	}
+	return smc->hw.t_stop;
+}
+
+#ifdef	PCI
+/************************
+ *
+ *	hwt_quick_read
+ *
+ *	Stop hardware timer and read timer value and start the timer again.
+ *
+ *	u_long hwt_read(smc) ;
+ * In
+ *	smc - A pointer to the SMT Context structure.
+ * Out
+ *	current timer value in units of 80ns.
+ *
+ ************************/
+u_long hwt_quick_read(struct s_smc *smc)
+{
+	u_long interval ;
+	u_long time ;
+
+	interval = inpd(ADDR(B2_TI_INI)) ;
+	outpw(ADDR(B2_TI_CRTL), TIM_STOP) ;
+	time = inpd(ADDR(B2_TI_VAL)) ;
+	outpd(ADDR(B2_TI_INI),time) ;
+	outpw(ADDR(B2_TI_CRTL), TIM_START) ;
+	outpd(ADDR(B2_TI_INI),interval) ;
+
+	return time;
+}
+
+/************************
+ *
+ *	hwt_wait_time(smc,start,duration)
+ *
+ *	This function returnes after the amount of time is elapsed
+ *	since the start time.
+ * 
+ * para	start		start time
+ *	duration	time to wait
+ *
+ * NOTE: The function will return immediately, if the timer is not
+ *	 started
+ ************************/
+void hwt_wait_time(struct s_smc *smc, u_long start, long int duration)
+{
+	long	diff ;
+	long	interval ;
+	int	wrapped ;
+
+	/*
+	 * check if timer is running
+	 */
+	if (smc->hw.timer_activ == FALSE ||
+		hwt_quick_read(smc) == hwt_quick_read(smc)) {
+		return ;
+	}
+
+	interval = inpd(ADDR(B2_TI_INI)) ;
+	if (interval > duration) {
+		do {
+			diff = (long)(start - hwt_quick_read(smc)) ;
+			if (diff < 0) {
+				diff += interval ;
+			}
+		} while (diff <= duration) ;
+	}
+	else {
+		diff = interval ;
+		wrapped = 0 ;
+		do {
+			if (!wrapped) {
+				if (hwt_quick_read(smc) >= start) {
+					diff += interval ;
+					wrapped = 1 ;
+				}
+			}
+			else {
+				if (hwt_quick_read(smc) < start) {
+					wrapped = 0 ;
+				}
+			}
+		} while (diff <= duration) ;
+	}
+}
+#endif
+
diff --git a/drivers/net/fddi/skfp/pcmplc.c b/drivers/net/fddi/skfp/pcmplc.c
new file mode 100644
index 0000000..88d02d0
--- /dev/null
+++ b/drivers/net/fddi/skfp/pcmplc.c
@@ -0,0 +1,2014 @@
+/******************************************************************************
+ *
+ *	(C)Copyright 1998,1999 SysKonnect,
+ *	a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ *	See the file "skfddi.c" for further information.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+	PCM
+	Physical Connection Management
+*/
+
+/*
+ * Hardware independent state machine implemantation
+ * The following external SMT functions are referenced :
+ *
+ * 		queue_event()
+ * 		smt_timer_start()
+ * 		smt_timer_stop()
+ *
+ * 	The following external HW dependent functions are referenced :
+ * 		sm_pm_control()
+ *		sm_ph_linestate()
+ *		sm_pm_ls_latch()
+ *
+ * 	The following HW dependent events are required :
+ *		PC_QLS
+ *		PC_ILS
+ *		PC_HLS
+ *		PC_MLS
+ *		PC_NSE
+ *		PC_LEM
+ *
+ */
+
+
+#include "h/types.h"
+#include "h/fddi.h"
+#include "h/smc.h"
+#include "h/supern_2.h"
+#define KERNEL
+#include "h/smtstate.h"
+
+#ifndef	lint
+static const char ID_sccs[] = "@(#)pcmplc.c	2.55 99/08/05 (C) SK " ;
+#endif
+
+#ifdef	FDDI_MIB
+extern int snmp_fddi_trap(
+#ifdef	ANSIC
+struct s_smc	* smc, int  type, int  index
+#endif
+);
+#endif
+#ifdef	CONCENTRATOR
+extern int plc_is_installed(
+#ifdef	ANSIC
+struct s_smc *smc ,
+int p
+#endif
+) ;
+#endif
+/*
+ * FSM Macros
+ */
+#define AFLAG		(0x20)
+#define GO_STATE(x)	(mib->fddiPORTPCMState = (x)|AFLAG)
+#define ACTIONS_DONE()	(mib->fddiPORTPCMState &= ~AFLAG)
+#define ACTIONS(x)	(x|AFLAG)
+
+/*
+ * PCM states
+ */
+#define PC0_OFF			0
+#define PC1_BREAK		1
+#define PC2_TRACE		2
+#define PC3_CONNECT		3
+#define PC4_NEXT		4
+#define PC5_SIGNAL		5
+#define PC6_JOIN		6
+#define PC7_VERIFY		7
+#define PC8_ACTIVE		8
+#define PC9_MAINT		9
+
+#ifdef	DEBUG
+/*
+ * symbolic state names
+ */
+static const char * const pcm_states[] =  {
+	"PC0_OFF","PC1_BREAK","PC2_TRACE","PC3_CONNECT","PC4_NEXT",
+	"PC5_SIGNAL","PC6_JOIN","PC7_VERIFY","PC8_ACTIVE","PC9_MAINT"
+} ;
+
+/*
+ * symbolic event names
+ */
+static const char * const pcm_events[] = {
+	"NONE","PC_START","PC_STOP","PC_LOOP","PC_JOIN","PC_SIGNAL",
+	"PC_REJECT","PC_MAINT","PC_TRACE","PC_PDR",
+	"PC_ENABLE","PC_DISABLE",
+	"PC_QLS","PC_ILS","PC_MLS","PC_HLS","PC_LS_PDR","PC_LS_NONE",
+	"PC_TIMEOUT_TB_MAX","PC_TIMEOUT_TB_MIN",
+	"PC_TIMEOUT_C_MIN","PC_TIMEOUT_T_OUT",
+	"PC_TIMEOUT_TL_MIN","PC_TIMEOUT_T_NEXT","PC_TIMEOUT_LCT",
+	"PC_NSE","PC_LEM"
+} ;
+#endif
+
+#ifdef	MOT_ELM
+/*
+ * PCL-S control register
+ * this register in the PLC-S controls the scrambling parameters
+ */
+#define PLCS_CONTROL_C_U	0
+#define PLCS_CONTROL_C_S	(PL_C_SDOFF_ENABLE | PL_C_SDON_ENABLE | \
+				 PL_C_CIPHER_ENABLE)
+#define	PLCS_FASSERT_U		0
+#define	PLCS_FASSERT_S		0xFd76	/* 52.0 us */
+#define	PLCS_FDEASSERT_U	0
+#define	PLCS_FDEASSERT_S	0
+#else	/* nMOT_ELM */
+/*
+ * PCL-S control register
+ * this register in the PLC-S controls the scrambling parameters
+ * can be patched for ANSI compliance if standard changes
+ */
+static const u_char plcs_control_c_u[17] = "PLC_CNTRL_C_U=\0\0" ;
+static const u_char plcs_control_c_s[17] = "PLC_CNTRL_C_S=\01\02" ;
+
+#define PLCS_CONTROL_C_U (plcs_control_c_u[14] | (plcs_control_c_u[15]<<8))
+#define PLCS_CONTROL_C_S (plcs_control_c_s[14] | (plcs_control_c_s[15]<<8))
+#endif	/* nMOT_ELM */
+
+/*
+ * external vars
+ */
+/* struct definition see 'cmtdef.h' (also used by CFM) */
+
+#define PS_OFF		0
+#define PS_BIT3		1
+#define PS_BIT4		2
+#define PS_BIT7		3
+#define PS_LCT		4
+#define PS_BIT8		5
+#define PS_JOIN		6
+#define PS_ACTIVE	7
+
+#define LCT_LEM_MAX	255
+
+/*
+ * PLC timing parameter
+ */
+
+#define PLC_MS(m)	((int)((0x10000L-(m*100000L/2048))))
+#define SLOW_TL_MIN	PLC_MS(6)
+#define SLOW_C_MIN	PLC_MS(10)
+
+static	const struct plt {
+	int	timer ;			/* relative plc timer address */
+	int	para ;			/* default timing parameters */
+} pltm[] = {
+	{ PL_C_MIN, SLOW_C_MIN },	/* min t. to remain Connect State */
+	{ PL_TL_MIN, SLOW_TL_MIN },	/* min t. to transmit a Line State */
+	{ PL_TB_MIN, TP_TB_MIN },	/* min break time */
+	{ PL_T_OUT, TP_T_OUT },		/* Signaling timeout */
+	{ PL_LC_LENGTH, TP_LC_LENGTH },	/* Link Confidence Test Time */
+	{ PL_T_SCRUB, TP_T_SCRUB },	/* Scrub Time == MAC TVX time ! */
+	{ PL_NS_MAX, TP_NS_MAX },	/* max t. that noise is tolerated */
+	{ 0,0 }
+} ;
+
+/*
+ * interrupt mask
+ */
+#ifdef	SUPERNET_3
+/*
+ * Do we need the EBUF error during signaling, too, to detect SUPERNET_3
+ * PLL bug?
+ */
+static const int plc_imsk_na = PL_PCM_CODE | PL_TRACE_PROP | PL_PCM_BREAK |
+			PL_PCM_ENABLED | PL_SELF_TEST | PL_EBUF_ERR;
+#else	/* SUPERNET_3 */
+/*
+ * We do NOT need the elasticity buffer error during signaling.
+ */
+static int plc_imsk_na = PL_PCM_CODE | PL_TRACE_PROP | PL_PCM_BREAK |
+			PL_PCM_ENABLED | PL_SELF_TEST ;
+#endif	/* SUPERNET_3 */
+static const int plc_imsk_act = PL_PCM_CODE | PL_TRACE_PROP | PL_PCM_BREAK |
+			PL_PCM_ENABLED | PL_SELF_TEST | PL_EBUF_ERR;
+
+/* internal functions */
+static void pcm_fsm(struct s_smc *smc, struct s_phy *phy, int cmd);
+static void pc_rcode_actions(struct s_smc *smc, int bit, struct s_phy *phy);
+static void pc_tcode_actions(struct s_smc *smc, const int bit, struct s_phy *phy);
+static void reset_lem_struct(struct s_phy *phy);
+static void plc_init(struct s_smc *smc, int p);
+static void sm_ph_lem_start(struct s_smc *smc, int np, int threshold);
+static void sm_ph_lem_stop(struct s_smc *smc, int np);
+static void sm_ph_linestate(struct s_smc *smc, int phy, int ls);
+static void real_init_plc(struct s_smc *smc);
+
+/*
+ * SMT timer interface
+ *      start PCM timer 0
+ */
+static void start_pcm_timer0(struct s_smc *smc, u_long value, int event,
+			     struct s_phy *phy)
+{
+	phy->timer0_exp = FALSE ;       /* clear timer event flag */
+	smt_timer_start(smc,&phy->pcm_timer0,value,
+		EV_TOKEN(EVENT_PCM+phy->np,event)) ;
+}
+/*
+ * SMT timer interface
+ *      stop PCM timer 0
+ */
+static void stop_pcm_timer0(struct s_smc *smc, struct s_phy *phy)
+{
+	if (phy->pcm_timer0.tm_active)
+		smt_timer_stop(smc,&phy->pcm_timer0) ;
+}
+
+/*
+	init PCM state machine (called by driver)
+	clear all PCM vars and flags
+*/
+void pcm_init(struct s_smc *smc)
+{
+	int		i ;
+	int		np ;
+	struct s_phy	*phy ;
+	struct fddi_mib_p	*mib ;
+
+	for (np = 0,phy = smc->y ; np < NUMPHYS ; np++,phy++) {
+		/* Indicates the type of PHY being used */
+		mib = phy->mib ;
+		mib->fddiPORTPCMState = ACTIONS(PC0_OFF) ;
+		phy->np = np ;
+		switch (smc->s.sas) {
+#ifdef	CONCENTRATOR
+		case SMT_SAS :
+			mib->fddiPORTMy_Type = (np == PS) ? TS : TM ;
+			break ;
+		case SMT_DAS :
+			mib->fddiPORTMy_Type = (np == PA) ? TA :
+					(np == PB) ? TB : TM ;
+			break ;
+		case SMT_NAC :
+			mib->fddiPORTMy_Type = TM ;
+			break;
+#else
+		case SMT_SAS :
+			mib->fddiPORTMy_Type = (np == PS) ? TS : TNONE ;
+			mib->fddiPORTHardwarePresent = (np == PS) ? TRUE :
+					FALSE ;
+#ifndef	SUPERNET_3
+			smc->y[PA].mib->fddiPORTPCMState = PC0_OFF ;
+#else
+			smc->y[PB].mib->fddiPORTPCMState = PC0_OFF ;
+#endif
+			break ;
+		case SMT_DAS :
+			mib->fddiPORTMy_Type = (np == PB) ? TB : TA ;
+			break ;
+#endif
+		}
+		/*
+		 * set PMD-type
+		 */
+		phy->pmd_scramble = 0 ;
+		switch (phy->pmd_type[PMD_SK_PMD]) {
+		case 'P' :
+			mib->fddiPORTPMDClass = MIB_PMDCLASS_MULTI ;
+			break ;
+		case 'L' :
+			mib->fddiPORTPMDClass = MIB_PMDCLASS_LCF ;
+			break ;
+		case 'D' :
+			mib->fddiPORTPMDClass = MIB_PMDCLASS_TP ;
+			break ;
+		case 'S' :
+			mib->fddiPORTPMDClass = MIB_PMDCLASS_TP ;
+			phy->pmd_scramble = TRUE ;
+			break ;
+		case 'U' :
+			mib->fddiPORTPMDClass = MIB_PMDCLASS_TP ;
+			phy->pmd_scramble = TRUE ;
+			break ;
+		case '1' :
+			mib->fddiPORTPMDClass = MIB_PMDCLASS_SINGLE1 ;
+			break ;
+		case '2' :
+			mib->fddiPORTPMDClass = MIB_PMDCLASS_SINGLE2 ;
+			break ;
+		case '3' :
+			mib->fddiPORTPMDClass = MIB_PMDCLASS_SINGLE2 ;
+			break ;
+		case '4' :
+			mib->fddiPORTPMDClass = MIB_PMDCLASS_SINGLE1 ;
+			break ;
+		case 'H' :
+			mib->fddiPORTPMDClass = MIB_PMDCLASS_UNKNOWN ;
+			break ;
+		case 'I' :
+			mib->fddiPORTPMDClass = MIB_PMDCLASS_TP ;
+			break ;
+		case 'G' :
+			mib->fddiPORTPMDClass = MIB_PMDCLASS_TP ;
+			break ;
+		default:
+			mib->fddiPORTPMDClass = MIB_PMDCLASS_UNKNOWN ;
+			break ;
+		}
+		/*
+		 * A and B port can be on primary and secondary path
+		 */
+		switch (mib->fddiPORTMy_Type) {
+		case TA :
+			mib->fddiPORTAvailablePaths |= MIB_PATH_S ;
+			mib->fddiPORTRequestedPaths[1] = MIB_P_PATH_LOCAL ;
+			mib->fddiPORTRequestedPaths[2] =
+				MIB_P_PATH_LOCAL |
+				MIB_P_PATH_CON_ALTER |
+				MIB_P_PATH_SEC_PREFER ;
+			mib->fddiPORTRequestedPaths[3] =
+				MIB_P_PATH_LOCAL |
+				MIB_P_PATH_CON_ALTER |
+				MIB_P_PATH_SEC_PREFER |
+				MIB_P_PATH_THRU ;
+			break ;
+		case TB :
+			mib->fddiPORTAvailablePaths |= MIB_PATH_S ;
+			mib->fddiPORTRequestedPaths[1] = MIB_P_PATH_LOCAL ;
+			mib->fddiPORTRequestedPaths[2] =
+				MIB_P_PATH_LOCAL |
+				MIB_P_PATH_PRIM_PREFER ;
+			mib->fddiPORTRequestedPaths[3] =
+				MIB_P_PATH_LOCAL |
+				MIB_P_PATH_PRIM_PREFER |
+				MIB_P_PATH_CON_PREFER |
+				MIB_P_PATH_THRU ;
+			break ;
+		case TS :
+			mib->fddiPORTAvailablePaths |= MIB_PATH_S ;
+			mib->fddiPORTRequestedPaths[1] = MIB_P_PATH_LOCAL ;
+			mib->fddiPORTRequestedPaths[2] =
+				MIB_P_PATH_LOCAL |
+				MIB_P_PATH_CON_ALTER |
+				MIB_P_PATH_PRIM_PREFER ;
+			mib->fddiPORTRequestedPaths[3] =
+				MIB_P_PATH_LOCAL |
+				MIB_P_PATH_CON_ALTER |
+				MIB_P_PATH_PRIM_PREFER ;
+			break ;
+		case TM :
+			mib->fddiPORTRequestedPaths[1] = MIB_P_PATH_LOCAL ;
+			mib->fddiPORTRequestedPaths[2] =
+				MIB_P_PATH_LOCAL |
+				MIB_P_PATH_SEC_ALTER |
+				MIB_P_PATH_PRIM_ALTER ;
+			mib->fddiPORTRequestedPaths[3] = 0 ;
+			break ;
+		}
+
+		phy->pc_lem_fail = FALSE ;
+		mib->fddiPORTPCMStateX = mib->fddiPORTPCMState ;
+		mib->fddiPORTLCTFail_Ct = 0 ;
+		mib->fddiPORTBS_Flag = 0 ;
+		mib->fddiPORTCurrentPath = MIB_PATH_ISOLATED ;
+		mib->fddiPORTNeighborType = TNONE ;
+		phy->ls_flag = 0 ;
+		phy->rc_flag = 0 ;
+		phy->tc_flag = 0 ;
+		phy->td_flag = 0 ;
+		if (np >= PM)
+			phy->phy_name = '0' + np - PM ;
+		else
+			phy->phy_name = 'A' + np ;
+		phy->wc_flag = FALSE ;		/* set by SMT */
+		memset((char *)&phy->lem,0,sizeof(struct lem_counter)) ;
+		reset_lem_struct(phy) ;
+		memset((char *)&phy->plc,0,sizeof(struct s_plc)) ;
+		phy->plc.p_state = PS_OFF ;
+		for (i = 0 ; i < NUMBITS ; i++) {
+			phy->t_next[i] = 0 ;
+		}
+	}
+	real_init_plc(smc) ;
+}
+
+void init_plc(struct s_smc *smc)
+{
+	SK_UNUSED(smc) ;
+
+	/*
+	 * dummy
+	 * this is an obsolete public entry point that has to remain
+	 * for compat. It is used by various drivers.
+	 * the work is now done in real_init_plc()
+	 * which is called from pcm_init() ;
+	 */
+}
+
+static void real_init_plc(struct s_smc *smc)
+{
+	int	p ;
+
+	for (p = 0 ; p < NUMPHYS ; p++)
+		plc_init(smc,p) ;
+}
+
+static void plc_init(struct s_smc *smc, int p)
+{
+	int	i ;
+#ifndef	MOT_ELM
+	int	rev ;	/* Revision of PLC-x */
+#endif	/* MOT_ELM */
+
+	/* transit PCM state machine to MAINT state */
+	outpw(PLC(p,PL_CNTRL_B),0) ;
+	outpw(PLC(p,PL_CNTRL_B),PL_PCM_STOP) ;
+	outpw(PLC(p,PL_CNTRL_A),0) ;
+
+	/*
+	 * if PLC-S then set control register C
+	 */
+#ifndef	MOT_ELM
+	rev = inpw(PLC(p,PL_STATUS_A)) & PLC_REV_MASK ;
+	if (rev != PLC_REVISION_A)
+#endif	/* MOT_ELM */
+	{
+		if (smc->y[p].pmd_scramble) {
+			outpw(PLC(p,PL_CNTRL_C),PLCS_CONTROL_C_S) ;
+#ifdef	MOT_ELM
+			outpw(PLC(p,PL_T_FOT_ASS),PLCS_FASSERT_S) ;
+			outpw(PLC(p,PL_T_FOT_DEASS),PLCS_FDEASSERT_S) ;
+#endif	/* MOT_ELM */
+		}
+		else {
+			outpw(PLC(p,PL_CNTRL_C),PLCS_CONTROL_C_U) ;
+#ifdef	MOT_ELM
+			outpw(PLC(p,PL_T_FOT_ASS),PLCS_FASSERT_U) ;
+			outpw(PLC(p,PL_T_FOT_DEASS),PLCS_FDEASSERT_U) ;
+#endif	/* MOT_ELM */
+		}
+	}
+
+	/*
+	 * set timer register
+	 */
+	for ( i = 0 ; pltm[i].timer; i++)	/* set timer parameter reg */
+		outpw(PLC(p,pltm[i].timer),pltm[i].para) ;
+
+	(void)inpw(PLC(p,PL_INTR_EVENT)) ;	/* clear interrupt event reg */
+	plc_clear_irq(smc,p) ;
+	outpw(PLC(p,PL_INTR_MASK),plc_imsk_na); /* enable non active irq's */
+
+	/*
+	 * if PCM is configured for class s, it will NOT go to the
+	 * REMOVE state if offline (page 3-36;)
+	 * in the concentrator, all inactive PHYS always must be in
+	 * the remove state
+	 * there's no real need to use this feature at all ..
+	 */
+#ifndef	CONCENTRATOR
+	if ((smc->s.sas == SMT_SAS) && (p == PS)) {
+		outpw(PLC(p,PL_CNTRL_B),PL_CLASS_S) ;
+	}
+#endif
+}
+
+/*
+ * control PCM state machine
+ */
+static void plc_go_state(struct s_smc *smc, int p, int state)
+{
+	HW_PTR port ;
+	int val ;
+
+	SK_UNUSED(smc) ;
+
+	port = (HW_PTR) (PLC(p,PL_CNTRL_B)) ;
+	val = inpw(port) & ~(PL_PCM_CNTRL | PL_MAINT) ;
+	outpw(port,val) ;
+	outpw(port,val | state) ;
+}
+
+/*
+ * read current line state (called by ECM & PCM)
+ */
+int sm_pm_get_ls(struct s_smc *smc, int phy)
+{
+	int	state ;
+
+#ifdef	CONCENTRATOR
+	if (!plc_is_installed(smc,phy))
+		return PC_QLS;
+#endif
+
+	state = inpw(PLC(phy,PL_STATUS_A)) & PL_LINE_ST ;
+	switch(state) {
+	case PL_L_QLS:
+		state = PC_QLS ;
+		break ;
+	case PL_L_MLS:
+		state = PC_MLS ;
+		break ;
+	case PL_L_HLS:
+		state = PC_HLS ;
+		break ;
+	case PL_L_ILS4:
+	case PL_L_ILS16:
+		state = PC_ILS ;
+		break ;
+	case PL_L_ALS:
+		state = PC_LS_PDR ;
+		break ;
+	default :
+		state = PC_LS_NONE ;
+	}
+	return state;
+}
+
+static int plc_send_bits(struct s_smc *smc, struct s_phy *phy, int len)
+{
+	int np = phy->np ;		/* PHY index */
+	int	n ;
+	int	i ;
+
+	SK_UNUSED(smc) ;
+
+	/* create bit vector */
+	for (i = len-1,n = 0 ; i >= 0 ; i--) {
+		n = (n<<1) | phy->t_val[phy->bitn+i] ;
+	}
+	if (inpw(PLC(np,PL_STATUS_B)) & PL_PCM_SIGNAL) {
+#if	0
+		printf("PL_PCM_SIGNAL is set\n") ;
+#endif
+		return 1;
+	}
+	/* write bit[n] & length = 1 to regs */
+	outpw(PLC(np,PL_VECTOR_LEN),len-1) ;	/* len=nr-1 */
+	outpw(PLC(np,PL_XMIT_VECTOR),n) ;
+#ifdef	DEBUG
+#if 1
+#ifdef	DEBUG_BRD
+	if (smc->debug.d_plc & 0x80)
+#else
+	if (debug.d_plc & 0x80)
+#endif
+		printf("SIGNALING bit %d .. %d\n",phy->bitn,phy->bitn+len-1) ;
+#endif
+#endif
+	return 0;
+}
+
+/*
+ * config plc muxes
+ */
+void plc_config_mux(struct s_smc *smc, int mux)
+{
+	if (smc->s.sas != SMT_DAS)
+		return ;
+	if (mux == MUX_WRAPB) {
+		SETMASK(PLC(PA,PL_CNTRL_B),PL_CONFIG_CNTRL,PL_CONFIG_CNTRL) ;
+		SETMASK(PLC(PA,PL_CNTRL_A),PL_SC_REM_LOOP,PL_SC_REM_LOOP) ;
+	}
+	else {
+		CLEAR(PLC(PA,PL_CNTRL_B),PL_CONFIG_CNTRL) ;
+		CLEAR(PLC(PA,PL_CNTRL_A),PL_SC_REM_LOOP) ;
+	}
+	CLEAR(PLC(PB,PL_CNTRL_B),PL_CONFIG_CNTRL) ;
+	CLEAR(PLC(PB,PL_CNTRL_A),PL_SC_REM_LOOP) ;
+}
+
+/*
+	PCM state machine
+	called by dispatcher  & fddi_init() (driver)
+	do
+		display state change
+		process event
+	until SM is stable
+*/
+void pcm(struct s_smc *smc, const int np, int event)
+{
+	int	state ;
+	int	oldstate ;
+	struct s_phy	*phy ;
+	struct fddi_mib_p	*mib ;
+
+#ifndef	CONCENTRATOR
+	/*
+	 * ignore 2nd PHY if SAS
+	 */
+	if ((np != PS) && (smc->s.sas == SMT_SAS))
+		return ;
+#endif
+	phy = &smc->y[np] ;
+	mib = phy->mib ;
+	oldstate = mib->fddiPORTPCMState ;
+	do {
+		DB_PCM("PCM %c: state %s",
+			phy->phy_name,
+			(mib->fddiPORTPCMState & AFLAG) ? "ACTIONS " : "") ;
+		DB_PCM("%s, event %s\n",
+			pcm_states[mib->fddiPORTPCMState & ~AFLAG],
+			pcm_events[event]) ;
+		state = mib->fddiPORTPCMState ;
+		pcm_fsm(smc,phy,event) ;
+		event = 0 ;
+	} while (state != mib->fddiPORTPCMState) ;
+	/*
+	 * because the PLC does the bit signaling for us,
+	 * we're always in SIGNAL state
+	 * the MIB want's to see CONNECT
+	 * we therefore fake an entry in the MIB
+	 */
+	if (state == PC5_SIGNAL)
+		mib->fddiPORTPCMStateX = PC3_CONNECT ;
+	else
+		mib->fddiPORTPCMStateX = state ;
+
+#ifndef	SLIM_SMT
+	/*
+	 * path change
+	 */
+	if (	mib->fddiPORTPCMState != oldstate &&
+		((oldstate == PC8_ACTIVE) || (mib->fddiPORTPCMState == PC8_ACTIVE))) {
+		smt_srf_event(smc,SMT_EVENT_PORT_PATH_CHANGE,
+			(int) (INDEX_PORT+ phy->np),0) ;
+	}
+#endif
+
+#ifdef FDDI_MIB
+	/* check whether a snmp-trap has to be sent */
+
+	if ( mib->fddiPORTPCMState != oldstate ) {
+		/* a real state change took place */
+		DB_SNMP ("PCM from %d to %d\n", oldstate, mib->fddiPORTPCMState);
+		if ( mib->fddiPORTPCMState == PC0_OFF ) {
+			/* send first trap */
+			snmp_fddi_trap (smc, 1, (int) mib->fddiPORTIndex );
+		} else if ( oldstate == PC0_OFF ) {
+			/* send second trap */
+			snmp_fddi_trap (smc, 2, (int) mib->fddiPORTIndex );
+		} else if ( mib->fddiPORTPCMState != PC2_TRACE &&
+			oldstate == PC8_ACTIVE ) {
+			/* send third trap */
+			snmp_fddi_trap (smc, 3, (int) mib->fddiPORTIndex );
+		} else if ( mib->fddiPORTPCMState == PC8_ACTIVE ) {
+			/* send fourth trap */
+			snmp_fddi_trap (smc, 4, (int) mib->fddiPORTIndex );
+		}
+	}
+#endif
+
+	pcm_state_change(smc,np,state) ;
+}
+
+/*
+ * PCM state machine
+ */
+static void pcm_fsm(struct s_smc *smc, struct s_phy *phy, int cmd)
+{
+	int	i ;
+	int	np = phy->np ;		/* PHY index */
+	struct s_plc	*plc ;
+	struct fddi_mib_p	*mib ;
+#ifndef	MOT_ELM
+	u_short	plc_rev ;		/* Revision of the plc */
+#endif	/* nMOT_ELM */
+
+	plc = &phy->plc ;
+	mib = phy->mib ;
+
+	/*
+	 * general transitions independent of state
+	 */
+	switch (cmd) {
+	case PC_STOP :
+		/*PC00-PC80*/
+		if (mib->fddiPORTPCMState != PC9_MAINT) {
+			GO_STATE(PC0_OFF) ;
+			AIX_EVENT(smc, (u_long) FDDI_RING_STATUS, (u_long)
+				FDDI_PORT_EVENT, (u_long) FDDI_PORT_STOP,
+				smt_get_port_event_word(smc));
+		}
+		return ;
+	case PC_START :
+		/*PC01-PC81*/
+		if (mib->fddiPORTPCMState != PC9_MAINT)
+			GO_STATE(PC1_BREAK) ;
+		return ;
+	case PC_DISABLE :
+		/* PC09-PC99 */
+		GO_STATE(PC9_MAINT) ;
+		AIX_EVENT(smc, (u_long) FDDI_RING_STATUS, (u_long)
+			FDDI_PORT_EVENT, (u_long) FDDI_PORT_DISABLED,
+			smt_get_port_event_word(smc));
+		return ;
+	case PC_TIMEOUT_LCT :
+		/* if long or extended LCT */
+		stop_pcm_timer0(smc,phy) ;
+		CLEAR(PLC(np,PL_CNTRL_B),PL_LONG) ;
+		/* end of LCT is indicate by PCM_CODE (initiate PCM event) */
+		return ;
+	}
+
+	switch(mib->fddiPORTPCMState) {
+	case ACTIONS(PC0_OFF) :
+		stop_pcm_timer0(smc,phy) ;
+		outpw(PLC(np,PL_CNTRL_A),0) ;
+		CLEAR(PLC(np,PL_CNTRL_B),PL_PC_JOIN) ;
+		CLEAR(PLC(np,PL_CNTRL_B),PL_LONG) ;
+		sm_ph_lem_stop(smc,np) ;		/* disable LEM */
+		phy->cf_loop = FALSE ;
+		phy->cf_join = FALSE ;
+		queue_event(smc,EVENT_CFM,CF_JOIN+np) ;
+		plc_go_state(smc,np,PL_PCM_STOP) ;
+		mib->fddiPORTConnectState = PCM_DISABLED ;
+		ACTIONS_DONE() ;
+		break ;
+	case PC0_OFF:
+		/*PC09*/
+		if (cmd == PC_MAINT) {
+			GO_STATE(PC9_MAINT) ;
+			break ;
+		}
+		break ;
+	case ACTIONS(PC1_BREAK) :
+		/* Stop the LCT timer if we came from Signal state */
+		stop_pcm_timer0(smc,phy) ;
+		ACTIONS_DONE() ;
+		plc_go_state(smc,np,0) ;
+		CLEAR(PLC(np,PL_CNTRL_B),PL_PC_JOIN) ;
+		CLEAR(PLC(np,PL_CNTRL_B),PL_LONG) ;
+		sm_ph_lem_stop(smc,np) ;		/* disable LEM */
+		/*
+		 * if vector is already loaded, go to OFF to clear PCM_SIGNAL
+		 */
+#if	0
+		if (inpw(PLC(np,PL_STATUS_B)) & PL_PCM_SIGNAL) {
+			plc_go_state(smc,np,PL_PCM_STOP) ;
+			/* TB_MIN ? */
+		}
+#endif
+		/*
+		 * Go to OFF state in any case.
+		 */
+		plc_go_state(smc,np,PL_PCM_STOP) ;
+
+		if (mib->fddiPORTPC_Withhold == PC_WH_NONE)
+			mib->fddiPORTConnectState = PCM_CONNECTING ;
+		phy->cf_loop = FALSE ;
+		phy->cf_join = FALSE ;
+		queue_event(smc,EVENT_CFM,CF_JOIN+np) ;
+		phy->ls_flag = FALSE ;
+		phy->pc_mode = PM_NONE ;	/* needed by CFM */
+		phy->bitn = 0 ;			/* bit signaling start bit */
+		for (i = 0 ; i < 3 ; i++)
+			pc_tcode_actions(smc,i,phy) ;
+
+		/* Set the non-active interrupt mask register */
+		outpw(PLC(np,PL_INTR_MASK),plc_imsk_na) ;
+
+		/*
+		 * If the LCT was stopped. There might be a
+		 * PCM_CODE interrupt event present.
+		 * This must be cleared.
+		 */
+		(void)inpw(PLC(np,PL_INTR_EVENT)) ;
+#ifndef	MOT_ELM
+		/* Get the plc revision for revision dependent code */
+		plc_rev = inpw(PLC(np,PL_STATUS_A)) & PLC_REV_MASK ;
+
+		if (plc_rev != PLC_REV_SN3)
+#endif	/* MOT_ELM */
+		{
+			/*
+			 * No supernet III PLC, so set Xmit verctor and
+			 * length BEFORE starting the state machine.
+			 */
+			if (plc_send_bits(smc,phy,3)) {
+				return ;
+			}
+		}
+
+		/*
+		 * Now give the Start command.
+		 * - The start command shall be done before setting the bits
+		 *   to be signaled. (In PLC-S description and PLCS in SN3.
+		 * - The start command shall be issued AFTER setting the
+		 *   XMIT vector and the XMIT length register.
+		 *
+		 * We do it exactly according this specs for the old PLC and
+		 * the new PLCS inside the SN3.
+		 * For the usual PLCS we try it the way it is done for the
+		 * old PLC and set the XMIT registers again, if the PLC is
+		 * not in SIGNAL state. This is done according to an PLCS
+		 * errata workaround.
+		 */
+
+		plc_go_state(smc,np,PL_PCM_START) ;
+
+		/*
+		 * workaround for PLC-S eng. sample errata
+		 */
+#ifdef	MOT_ELM
+		if (!(inpw(PLC(np,PL_STATUS_B)) & PL_PCM_SIGNAL))
+#else	/* nMOT_ELM */
+		if (((inpw(PLC(np,PL_STATUS_A)) & PLC_REV_MASK) !=
+			PLC_REVISION_A) &&
+			!(inpw(PLC(np,PL_STATUS_B)) & PL_PCM_SIGNAL))
+#endif	/* nMOT_ELM */
+		{
+			/*
+			 * Set register again (PLCS errata) or the first time
+			 * (new SN3 PLCS).
+			 */
+			(void) plc_send_bits(smc,phy,3) ;
+		}
+		/*
+		 * end of workaround
+		 */
+
+		GO_STATE(PC5_SIGNAL) ;
+		plc->p_state = PS_BIT3 ;
+		plc->p_bits = 3 ;
+		plc->p_start = 0 ;
+
+		break ;
+	case PC1_BREAK :
+		break ;
+	case ACTIONS(PC2_TRACE) :
+		plc_go_state(smc,np,PL_PCM_TRACE) ;
+		ACTIONS_DONE() ;
+		break ;
+	case PC2_TRACE :
+		break ;
+
+	case PC3_CONNECT :	/* these states are done by hardware */
+	case PC4_NEXT :
+		break ;
+
+	case ACTIONS(PC5_SIGNAL) :
+		ACTIONS_DONE() ;
+	case PC5_SIGNAL :
+		if ((cmd != PC_SIGNAL) && (cmd != PC_TIMEOUT_LCT))
+			break ;
+		switch (plc->p_state) {
+		case PS_BIT3 :
+			for (i = 0 ; i <= 2 ; i++)
+				pc_rcode_actions(smc,i,phy) ;
+			pc_tcode_actions(smc,3,phy) ;
+			plc->p_state = PS_BIT4 ;
+			plc->p_bits = 1 ;
+			plc->p_start = 3 ;
+			phy->bitn = 3 ;
+			if (plc_send_bits(smc,phy,1)) {
+				return ;
+			}
+			break ;
+		case PS_BIT4 :
+			pc_rcode_actions(smc,3,phy) ;
+			for (i = 4 ; i <= 6 ; i++)
+				pc_tcode_actions(smc,i,phy) ;
+			plc->p_state = PS_BIT7 ;
+			plc->p_bits = 3 ;
+			plc->p_start = 4 ;
+			phy->bitn = 4 ;
+			if (plc_send_bits(smc,phy,3)) {
+				return ;
+			}
+			break ;
+		case PS_BIT7 :
+			for (i = 3 ; i <= 6 ; i++)
+				pc_rcode_actions(smc,i,phy) ;
+			plc->p_state = PS_LCT ;
+			plc->p_bits = 0 ;
+			plc->p_start = 7 ;
+			phy->bitn = 7 ;
+		sm_ph_lem_start(smc,np,(int)smc->s.lct_short) ; /* enable LEM */
+			/* start LCT */
+			i = inpw(PLC(np,PL_CNTRL_B)) & ~PL_PC_LOOP ;
+			outpw(PLC(np,PL_CNTRL_B),i) ;	/* must be cleared */
+			outpw(PLC(np,PL_CNTRL_B),i | PL_RLBP) ;
+			break ;
+		case PS_LCT :
+			/* check for local LCT failure */
+			pc_tcode_actions(smc,7,phy) ;
+			/*
+			 * set tval[7]
+			 */
+			plc->p_state = PS_BIT8 ;
+			plc->p_bits = 1 ;
+			plc->p_start = 7 ;
+			phy->bitn = 7 ;
+			if (plc_send_bits(smc,phy,1)) {
+				return ;
+			}
+			break ;
+		case PS_BIT8 :
+			/* check for remote LCT failure */
+			pc_rcode_actions(smc,7,phy) ;
+			if (phy->t_val[7] || phy->r_val[7]) {
+				plc_go_state(smc,np,PL_PCM_STOP) ;
+				GO_STATE(PC1_BREAK) ;
+				break ;
+			}
+			for (i = 8 ; i <= 9 ; i++)
+				pc_tcode_actions(smc,i,phy) ;
+			plc->p_state = PS_JOIN ;
+			plc->p_bits = 2 ;
+			plc->p_start = 8 ;
+			phy->bitn = 8 ;
+			if (plc_send_bits(smc,phy,2)) {
+				return ;
+			}
+			break ;
+		case PS_JOIN :
+			for (i = 8 ; i <= 9 ; i++)
+				pc_rcode_actions(smc,i,phy) ;
+			plc->p_state = PS_ACTIVE ;
+			GO_STATE(PC6_JOIN) ;
+			break ;
+		}
+		break ;
+
+	case ACTIONS(PC6_JOIN) :
+		/*
+		 * prevent mux error when going from WRAP_A to WRAP_B
+		 */
+		if (smc->s.sas == SMT_DAS && np == PB &&
+			(smc->y[PA].pc_mode == PM_TREE ||
+			 smc->y[PB].pc_mode == PM_TREE)) {
+			SETMASK(PLC(np,PL_CNTRL_A),
+				PL_SC_REM_LOOP,PL_SC_REM_LOOP) ;
+			SETMASK(PLC(np,PL_CNTRL_B),
+				PL_CONFIG_CNTRL,PL_CONFIG_CNTRL) ;
+		}
+		SETMASK(PLC(np,PL_CNTRL_B),PL_PC_JOIN,PL_PC_JOIN) ;
+		SETMASK(PLC(np,PL_CNTRL_B),PL_PC_JOIN,PL_PC_JOIN) ;
+		ACTIONS_DONE() ;
+		cmd = 0 ;
+		/* fall thru */
+	case PC6_JOIN :
+		switch (plc->p_state) {
+		case PS_ACTIVE:
+			/*PC88b*/
+			if (!phy->cf_join) {
+				phy->cf_join = TRUE ;
+				queue_event(smc,EVENT_CFM,CF_JOIN+np) ;
+			}
+			if (cmd == PC_JOIN)
+				GO_STATE(PC8_ACTIVE) ;
+			/*PC82*/
+			if (cmd == PC_TRACE) {
+				GO_STATE(PC2_TRACE) ;
+				break ;
+			}
+			break ;
+		}
+		break ;
+
+	case PC7_VERIFY :
+		break ;
+
+	case ACTIONS(PC8_ACTIVE) :
+		/*
+		 * start LEM for SMT
+		 */
+		sm_ph_lem_start(smc,(int)phy->np,LCT_LEM_MAX) ;
+
+		phy->tr_flag = FALSE ;
+		mib->fddiPORTConnectState = PCM_ACTIVE ;
+
+		/* Set the active interrupt mask register */
+		outpw(PLC(np,PL_INTR_MASK),plc_imsk_act) ;
+
+		ACTIONS_DONE() ;
+		break ;
+	case PC8_ACTIVE :
+		/*PC81 is done by PL_TNE_EXPIRED irq */
+		/*PC82*/
+		if (cmd == PC_TRACE) {
+			GO_STATE(PC2_TRACE) ;
+			break ;
+		}
+		/*PC88c: is done by TRACE_PROP irq */
+
+		break ;
+	case ACTIONS(PC9_MAINT) :
+		stop_pcm_timer0(smc,phy) ;
+		CLEAR(PLC(np,PL_CNTRL_B),PL_PC_JOIN) ;
+		CLEAR(PLC(np,PL_CNTRL_B),PL_LONG) ;
+		CLEAR(PLC(np,PL_INTR_MASK),PL_LE_CTR) ;	/* disable LEM int. */
+		sm_ph_lem_stop(smc,np) ;		/* disable LEM */
+		phy->cf_loop = FALSE ;
+		phy->cf_join = FALSE ;
+		queue_event(smc,EVENT_CFM,CF_JOIN+np) ;
+		plc_go_state(smc,np,PL_PCM_STOP) ;
+		mib->fddiPORTConnectState = PCM_DISABLED ;
+		SETMASK(PLC(np,PL_CNTRL_B),PL_MAINT,PL_MAINT) ;
+		sm_ph_linestate(smc,np,(int) MIB2LS(mib->fddiPORTMaint_LS)) ;
+		outpw(PLC(np,PL_CNTRL_A),PL_SC_BYPASS) ;
+		ACTIONS_DONE() ;
+		break ;
+	case PC9_MAINT :
+		DB_PCMN(1,"PCM %c : MAINT\n",phy->phy_name,0) ;
+		/*PC90*/
+		if (cmd == PC_ENABLE) {
+			GO_STATE(PC0_OFF) ;
+			break ;
+		}
+		break ;
+
+	default:
+		SMT_PANIC(smc,SMT_E0118, SMT_E0118_MSG) ;
+		break ;
+	}
+}
+
+/*
+ * force line state on a PHY output	(only in MAINT state)
+ */
+static void sm_ph_linestate(struct s_smc *smc, int phy, int ls)
+{
+	int	cntrl ;
+
+	SK_UNUSED(smc) ;
+
+	cntrl = (inpw(PLC(phy,PL_CNTRL_B)) & ~PL_MAINT_LS) |
+						PL_PCM_STOP | PL_MAINT ;
+	switch(ls) {
+	case PC_QLS: 		/* Force Quiet */
+		cntrl |= PL_M_QUI0 ;
+		break ;
+	case PC_MLS: 		/* Force Master */
+		cntrl |= PL_M_MASTR ;
+		break ;
+	case PC_HLS: 		/* Force Halt */
+		cntrl |= PL_M_HALT ;
+		break ;
+	default :
+	case PC_ILS: 		/* Force Idle */
+		cntrl |= PL_M_IDLE ;
+		break ;
+	case PC_LS_PDR: 	/* Enable repeat filter */
+		cntrl |= PL_M_TPDR ;
+		break ;
+	}
+	outpw(PLC(phy,PL_CNTRL_B),cntrl) ;
+}
+
+static void reset_lem_struct(struct s_phy *phy)
+{
+	struct lem_counter *lem = &phy->lem ;
+
+	phy->mib->fddiPORTLer_Estimate = 15 ;
+	lem->lem_float_ber = 15 * 100 ;
+}
+
+/*
+ * link error monitor
+ */
+static void lem_evaluate(struct s_smc *smc, struct s_phy *phy)
+{
+	int ber ;
+	u_long errors ;
+	struct lem_counter *lem = &phy->lem ;
+	struct fddi_mib_p	*mib ;
+	int			cond ;
+
+	mib = phy->mib ;
+
+	if (!lem->lem_on)
+		return ;
+
+	errors = inpw(PLC(((int) phy->np),PL_LINK_ERR_CTR)) ;
+	lem->lem_errors += errors ;
+	mib->fddiPORTLem_Ct += errors ;
+
+	errors = lem->lem_errors ;
+	/*
+	 * calculation is called on a intervall of 8 seconds
+	 *	-> this means, that one error in 8 sec. is one of 8*125*10E6
+	 *	the same as BER = 10E-9
+	 * Please note:
+	 *	-> 9 errors in 8 seconds mean:
+	 *	   BER = 9 * 10E-9  and this is
+	 *	    < 10E-8, so the limit of 10E-8 is not reached!
+	 */
+
+		if (!errors)		ber = 15 ;
+	else	if (errors <= 9)	ber = 9 ;
+	else	if (errors <= 99)	ber = 8 ;
+	else	if (errors <= 999)	ber = 7 ;
+	else	if (errors <= 9999)	ber = 6 ;
+	else	if (errors <= 99999)	ber = 5 ;
+	else	if (errors <= 999999)	ber = 4 ;
+	else	if (errors <= 9999999)	ber = 3 ;
+	else	if (errors <= 99999999)	ber = 2 ;
+	else	if (errors <= 999999999) ber = 1 ;
+	else				ber = 0 ;
+
+	/*
+	 * weighted average
+	 */
+	ber *= 100 ;
+	lem->lem_float_ber = lem->lem_float_ber * 7 + ber * 3 ;
+	lem->lem_float_ber /= 10 ;
+	mib->fddiPORTLer_Estimate = lem->lem_float_ber / 100 ;
+	if (mib->fddiPORTLer_Estimate < 4) {
+		mib->fddiPORTLer_Estimate = 4 ;
+	}
+
+	if (lem->lem_errors) {
+		DB_PCMN(1,"LEM %c :\n",phy->np == PB? 'B' : 'A',0) ;
+		DB_PCMN(1,"errors      : %ld\n",lem->lem_errors,0) ;
+		DB_PCMN(1,"sum_errors  : %ld\n",mib->fddiPORTLem_Ct,0) ;
+		DB_PCMN(1,"current BER : 10E-%d\n",ber/100,0) ;
+		DB_PCMN(1,"float BER   : 10E-(%d/100)\n",lem->lem_float_ber,0) ;
+		DB_PCMN(1,"avg. BER    : 10E-%d\n",
+			mib->fddiPORTLer_Estimate,0) ;
+	}
+
+	lem->lem_errors = 0L ;
+
+#ifndef	SLIM_SMT
+	cond = (mib->fddiPORTLer_Estimate <= mib->fddiPORTLer_Alarm) ?
+		TRUE : FALSE ;
+#ifdef	SMT_EXT_CUTOFF
+	smt_ler_alarm_check(smc,phy,cond) ;
+#endif	/* nSMT_EXT_CUTOFF */
+	if (cond != mib->fddiPORTLerFlag) {
+		smt_srf_event(smc,SMT_COND_PORT_LER,
+			(int) (INDEX_PORT+ phy->np) ,cond) ;
+	}
+#endif
+
+	if (	mib->fddiPORTLer_Estimate <= mib->fddiPORTLer_Cutoff) {
+		phy->pc_lem_fail = TRUE ;		/* flag */
+		mib->fddiPORTLem_Reject_Ct++ ;
+		/*
+		 * "forgive 10e-2" if we cutoff so we can come
+		 * up again ..
+		 */
+		lem->lem_float_ber += 2*100 ;
+
+		/*PC81b*/
+#ifdef	CONCENTRATOR
+		DB_PCMN(1,"PCM: LER cutoff on port %d cutoff %d\n",
+			phy->np, mib->fddiPORTLer_Cutoff) ;
+#endif
+#ifdef	SMT_EXT_CUTOFF
+		smt_port_off_event(smc,phy->np);
+#else	/* nSMT_EXT_CUTOFF */
+		queue_event(smc,(int)(EVENT_PCM+phy->np),PC_START) ;
+#endif	/* nSMT_EXT_CUTOFF */
+	}
+}
+
+/*
+ * called by SMT to calculate LEM bit error rate
+ */
+void sm_lem_evaluate(struct s_smc *smc)
+{
+	int np ;
+
+	for (np = 0 ; np < NUMPHYS ; np++)
+		lem_evaluate(smc,&smc->y[np]) ;
+}
+
+static void lem_check_lct(struct s_smc *smc, struct s_phy *phy)
+{
+	struct lem_counter	*lem = &phy->lem ;
+	struct fddi_mib_p	*mib ;
+	int errors ;
+
+	mib = phy->mib ;
+
+	phy->pc_lem_fail = FALSE ;		/* flag */
+	errors = inpw(PLC(((int)phy->np),PL_LINK_ERR_CTR)) ;
+	lem->lem_errors += errors ;
+	mib->fddiPORTLem_Ct += errors ;
+	if (lem->lem_errors) {
+		switch(phy->lc_test) {
+		case LC_SHORT:
+			if (lem->lem_errors >= smc->s.lct_short)
+				phy->pc_lem_fail = TRUE ;
+			break ;
+		case LC_MEDIUM:
+			if (lem->lem_errors >= smc->s.lct_medium)
+				phy->pc_lem_fail = TRUE ;
+			break ;
+		case LC_LONG:
+			if (lem->lem_errors >= smc->s.lct_long)
+				phy->pc_lem_fail = TRUE ;
+			break ;
+		case LC_EXTENDED:
+			if (lem->lem_errors >= smc->s.lct_extended)
+				phy->pc_lem_fail = TRUE ;
+			break ;
+		}
+		DB_PCMN(1," >>errors : %d\n",lem->lem_errors,0) ;
+	}
+	if (phy->pc_lem_fail) {
+		mib->fddiPORTLCTFail_Ct++ ;
+		mib->fddiPORTLem_Reject_Ct++ ;
+	}
+	else
+		mib->fddiPORTLCTFail_Ct = 0 ;
+}
+
+/*
+ * LEM functions
+ */
+static void sm_ph_lem_start(struct s_smc *smc, int np, int threshold)
+{
+	struct lem_counter *lem = &smc->y[np].lem ;
+
+	lem->lem_on = 1 ;
+	lem->lem_errors = 0L ;
+
+	/* Do NOT reset mib->fddiPORTLer_Estimate here. It is called too
+	 * often.
+	 */
+
+	outpw(PLC(np,PL_LE_THRESHOLD),threshold) ;
+	(void)inpw(PLC(np,PL_LINK_ERR_CTR)) ;	/* clear error counter */
+
+	/* enable LE INT */
+	SETMASK(PLC(np,PL_INTR_MASK),PL_LE_CTR,PL_LE_CTR) ;
+}
+
+static void sm_ph_lem_stop(struct s_smc *smc, int np)
+{
+	struct lem_counter *lem = &smc->y[np].lem ;
+
+	lem->lem_on = 0 ;
+	CLEAR(PLC(np,PL_INTR_MASK),PL_LE_CTR) ;
+}
+
+/* ARGSUSED */
+void sm_pm_ls_latch(struct s_smc *smc, int phy, int on_off)
+/* int on_off;	en- or disable ident. ls */
+{
+	SK_UNUSED(smc) ;
+
+	phy = phy ; on_off = on_off ;
+}
+
+
+/*
+ * PCM pseudo code
+ * receive actions are called AFTER the bit n is received,
+ * i.e. if pc_rcode_actions(5) is called, bit 6 is the next bit to be received
+ */
+
+/*
+ * PCM pseudo code 5.1 .. 6.1
+ */
+static void pc_rcode_actions(struct s_smc *smc, int bit, struct s_phy *phy)
+{
+	struct fddi_mib_p	*mib ;
+
+	mib = phy->mib ;
+
+	DB_PCMN(1,"SIG rec %x %x:\n", bit,phy->r_val[bit] ) ;
+	bit++ ;
+
+	switch(bit) {
+	case 0:
+	case 1:
+	case 2:
+		break ;
+	case 3 :
+		if (phy->r_val[1] == 0 && phy->r_val[2] == 0)
+			mib->fddiPORTNeighborType = TA ;
+		else if (phy->r_val[1] == 0 && phy->r_val[2] == 1)
+			mib->fddiPORTNeighborType = TB ;
+		else if (phy->r_val[1] == 1 && phy->r_val[2] == 0)
+			mib->fddiPORTNeighborType = TS ;
+		else if (phy->r_val[1] == 1 && phy->r_val[2] == 1)
+			mib->fddiPORTNeighborType = TM ;
+		break ;
+	case 4:
+		if (mib->fddiPORTMy_Type == TM &&
+			mib->fddiPORTNeighborType == TM) {
+			DB_PCMN(1,"PCM %c : E100 withhold M-M\n",
+				phy->phy_name,0) ;
+			mib->fddiPORTPC_Withhold = PC_WH_M_M ;
+			RS_SET(smc,RS_EVENT) ;
+		}
+		else if (phy->t_val[3] || phy->r_val[3]) {
+			mib->fddiPORTPC_Withhold = PC_WH_NONE ;
+			if (mib->fddiPORTMy_Type == TM ||
+			    mib->fddiPORTNeighborType == TM)
+				phy->pc_mode = PM_TREE ;
+			else
+				phy->pc_mode = PM_PEER ;
+
+			/* reevaluate the selection criteria (wc_flag) */
+			all_selection_criteria (smc);
+
+			if (phy->wc_flag) {
+				mib->fddiPORTPC_Withhold = PC_WH_PATH ;
+			}
+		}
+		else {
+			mib->fddiPORTPC_Withhold = PC_WH_OTHER ;
+			RS_SET(smc,RS_EVENT) ;
+			DB_PCMN(1,"PCM %c : E101 withhold other\n",
+				phy->phy_name,0) ;
+		}
+		phy->twisted = ((mib->fddiPORTMy_Type != TS) &&
+				(mib->fddiPORTMy_Type != TM) &&
+				(mib->fddiPORTNeighborType ==
+				mib->fddiPORTMy_Type)) ;
+		if (phy->twisted) {
+			DB_PCMN(1,"PCM %c : E102 !!! TWISTED !!!\n",
+				phy->phy_name,0) ;
+		}
+		break ;
+	case 5 :
+		break ;
+	case 6:
+		if (phy->t_val[4] || phy->r_val[4]) {
+			if ((phy->t_val[4] && phy->t_val[5]) ||
+			    (phy->r_val[4] && phy->r_val[5]) )
+				phy->lc_test = LC_EXTENDED ;
+			else
+				phy->lc_test = LC_LONG ;
+		}
+		else if (phy->t_val[5] || phy->r_val[5])
+			phy->lc_test = LC_MEDIUM ;
+		else
+			phy->lc_test = LC_SHORT ;
+		switch (phy->lc_test) {
+		case LC_SHORT :				/* 50ms */
+			outpw(PLC((int)phy->np,PL_LC_LENGTH), TP_LC_LENGTH ) ;
+			phy->t_next[7] = smc->s.pcm_lc_short ;
+			break ;
+		case LC_MEDIUM :			/* 500ms */
+			outpw(PLC((int)phy->np,PL_LC_LENGTH), TP_LC_LONGLN ) ;
+			phy->t_next[7] = smc->s.pcm_lc_medium ;
+			break ;
+		case LC_LONG :
+			SETMASK(PLC((int)phy->np,PL_CNTRL_B),PL_LONG,PL_LONG) ;
+			phy->t_next[7] = smc->s.pcm_lc_long ;
+			break ;
+		case LC_EXTENDED :
+			SETMASK(PLC((int)phy->np,PL_CNTRL_B),PL_LONG,PL_LONG) ;
+			phy->t_next[7] = smc->s.pcm_lc_extended ;
+			break ;
+		}
+		if (phy->t_next[7] > smc->s.pcm_lc_medium) {
+			start_pcm_timer0(smc,phy->t_next[7],PC_TIMEOUT_LCT,phy);
+		}
+		DB_PCMN(1,"LCT timer = %ld us\n", phy->t_next[7], 0) ;
+		phy->t_next[9] = smc->s.pcm_t_next_9 ;
+		break ;
+	case 7:
+		if (phy->t_val[6]) {
+			phy->cf_loop = TRUE ;
+		}
+		phy->td_flag = TRUE ;
+		break ;
+	case 8:
+		if (phy->t_val[7] || phy->r_val[7]) {
+			DB_PCMN(1,"PCM %c : E103 LCT fail %s\n",
+				phy->phy_name,phy->t_val[7]? "local":"remote") ;
+			queue_event(smc,(int)(EVENT_PCM+phy->np),PC_START) ;
+		}
+		break ;
+	case 9:
+		if (phy->t_val[8] || phy->r_val[8]) {
+			if (phy->t_val[8])
+				phy->cf_loop = TRUE ;
+			phy->td_flag = TRUE ;
+		}
+		break ;
+	case 10:
+		if (phy->r_val[9]) {
+			/* neighbor intends to have MAC on output */ ;
+			mib->fddiPORTMacIndicated.R_val = TRUE ;
+		}
+		else {
+			/* neighbor does not intend to have MAC on output */ ;
+			mib->fddiPORTMacIndicated.R_val = FALSE ;
+		}
+		break ;
+	}
+}
+
+/*
+ * PCM pseudo code 5.1 .. 6.1
+ */
+static void pc_tcode_actions(struct s_smc *smc, const int bit, struct s_phy *phy)
+{
+	int	np = phy->np ;
+	struct fddi_mib_p	*mib ;
+
+	mib = phy->mib ;
+
+	switch(bit) {
+	case 0:
+		phy->t_val[0] = 0 ;		/* no escape used */
+		break ;
+	case 1:
+		if (mib->fddiPORTMy_Type == TS || mib->fddiPORTMy_Type == TM)
+			phy->t_val[1] = 1 ;
+		else
+			phy->t_val[1] = 0 ;
+		break ;
+	case 2 :
+		if (mib->fddiPORTMy_Type == TB || mib->fddiPORTMy_Type == TM)
+			phy->t_val[2] = 1 ;
+		else
+			phy->t_val[2] = 0 ;
+		break ;
+	case 3:
+		{
+		int	type,ne ;
+		int	policy ;
+
+		type = mib->fddiPORTMy_Type ;
+		ne = mib->fddiPORTNeighborType ;
+		policy = smc->mib.fddiSMTConnectionPolicy ;
+
+		phy->t_val[3] = 1 ;	/* Accept connection */
+		switch (type) {
+		case TA :
+			if (
+				((policy & POLICY_AA) && ne == TA) ||
+				((policy & POLICY_AB) && ne == TB) ||
+				((policy & POLICY_AS) && ne == TS) ||
+				((policy & POLICY_AM) && ne == TM) )
+				phy->t_val[3] = 0 ;	/* Reject */
+			break ;
+		case TB :
+			if (
+				((policy & POLICY_BA) && ne == TA) ||
+				((policy & POLICY_BB) && ne == TB) ||
+				((policy & POLICY_BS) && ne == TS) ||
+				((policy & POLICY_BM) && ne == TM) )
+				phy->t_val[3] = 0 ;	/* Reject */
+			break ;
+		case TS :
+			if (
+				((policy & POLICY_SA) && ne == TA) ||
+				((policy & POLICY_SB) && ne == TB) ||
+				((policy & POLICY_SS) && ne == TS) ||
+				((policy & POLICY_SM) && ne == TM) )
+				phy->t_val[3] = 0 ;	/* Reject */
+			break ;
+		case TM :
+			if (	ne == TM ||
+				((policy & POLICY_MA) && ne == TA) ||
+				((policy & POLICY_MB) && ne == TB) ||
+				((policy & POLICY_MS) && ne == TS) ||
+				((policy & POLICY_MM) && ne == TM) )
+				phy->t_val[3] = 0 ;	/* Reject */
+			break ;
+		}
+#ifndef	SLIM_SMT
+		/*
+		 * detect undesirable connection attempt event
+		 */
+		if (	(type == TA && ne == TA ) ||
+			(type == TA && ne == TS ) ||
+			(type == TB && ne == TB ) ||
+			(type == TB && ne == TS ) ||
+			(type == TS && ne == TA ) ||
+			(type == TS && ne == TB ) ) {
+			smt_srf_event(smc,SMT_EVENT_PORT_CONNECTION,
+				(int) (INDEX_PORT+ phy->np) ,0) ;
+		}
+#endif
+		}
+		break ;
+	case 4:
+		if (mib->fddiPORTPC_Withhold == PC_WH_NONE) {
+			if (phy->pc_lem_fail) {
+				phy->t_val[4] = 1 ;	/* long */
+				phy->t_val[5] = 0 ;
+			}
+			else {
+				phy->t_val[4] = 0 ;
+				if (mib->fddiPORTLCTFail_Ct > 0)
+					phy->t_val[5] = 1 ;	/* medium */
+				else
+					phy->t_val[5] = 0 ;	/* short */
+
+				/*
+				 * Implementers choice: use medium
+				 * instead of short when undesired
+				 * connection attempt is made.
+				 */
+				if (phy->wc_flag)
+					phy->t_val[5] = 1 ;	/* medium */
+			}
+			mib->fddiPORTConnectState = PCM_CONNECTING ;
+		}
+		else {
+			mib->fddiPORTConnectState = PCM_STANDBY ;
+			phy->t_val[4] = 1 ;	/* extended */
+			phy->t_val[5] = 1 ;
+		}
+		break ;
+	case 5:
+		break ;
+	case 6:
+		/* we do NOT have a MAC for LCT */
+		phy->t_val[6] = 0 ;
+		break ;
+	case 7:
+		phy->cf_loop = FALSE ;
+		lem_check_lct(smc,phy) ;
+		if (phy->pc_lem_fail) {
+			DB_PCMN(1,"PCM %c : E104 LCT failed\n",
+				phy->phy_name,0) ;
+			phy->t_val[7] = 1 ;
+		}
+		else
+			phy->t_val[7] = 0 ;
+		break ;
+	case 8:
+		phy->t_val[8] = 0 ;	/* Don't request MAC loopback */
+		break ;
+	case 9:
+		phy->cf_loop = 0 ;
+		if ((mib->fddiPORTPC_Withhold != PC_WH_NONE) ||
+		     ((smc->s.sas == SMT_DAS) && (phy->wc_flag))) {
+			queue_event(smc,EVENT_PCM+np,PC_START) ;
+			break ;
+		}
+		phy->t_val[9] = FALSE ;
+		switch (smc->s.sas) {
+		case SMT_DAS :
+			/*
+			 * MAC intended on output
+			 */
+			if (phy->pc_mode == PM_TREE) {
+				if ((np == PB) || ((np == PA) &&
+				(smc->y[PB].mib->fddiPORTConnectState !=
+					PCM_ACTIVE)))
+					phy->t_val[9] = TRUE ;
+			}
+			else {
+				if (np == PB)
+					phy->t_val[9] = TRUE ;
+			}
+			break ;
+		case SMT_SAS :
+			if (np == PS)
+				phy->t_val[9] = TRUE ;
+			break ;
+#ifdef	CONCENTRATOR
+		case SMT_NAC :
+			/*
+			 * MAC intended on output
+			 */
+			if (np == PB)
+				phy->t_val[9] = TRUE ;
+			break ;
+#endif
+		}
+		mib->fddiPORTMacIndicated.T_val = phy->t_val[9] ;
+		break ;
+	}
+	DB_PCMN(1,"SIG snd %x %x:\n", bit,phy->t_val[bit] ) ;
+}
+
+/*
+ * return status twisted (called by SMT)
+ */
+int pcm_status_twisted(struct s_smc *smc)
+{
+	int	twist = 0 ;
+	if (smc->s.sas != SMT_DAS)
+		return 0;
+	if (smc->y[PA].twisted && (smc->y[PA].mib->fddiPORTPCMState == PC8_ACTIVE))
+		twist |= 1 ;
+	if (smc->y[PB].twisted && (smc->y[PB].mib->fddiPORTPCMState == PC8_ACTIVE))
+		twist |= 2 ;
+	return twist;
+}
+
+/*
+ * return status	(called by SMT)
+ *	type
+ *	state
+ *	remote phy type
+ *	remote mac yes/no
+ */
+void pcm_status_state(struct s_smc *smc, int np, int *type, int *state,
+		      int *remote, int *mac)
+{
+	struct s_phy	*phy = &smc->y[np] ;
+	struct fddi_mib_p	*mib ;
+
+	mib = phy->mib ;
+
+	/* remote PHY type and MAC - set only if active */
+	*mac = 0 ;
+	*type = mib->fddiPORTMy_Type ;		/* our PHY type */
+	*state = mib->fddiPORTConnectState ;
+	*remote = mib->fddiPORTNeighborType ;
+
+	switch(mib->fddiPORTPCMState) {
+	case PC8_ACTIVE :
+		*mac = mib->fddiPORTMacIndicated.R_val ;
+		break ;
+	}
+}
+
+/*
+ * return rooted station status (called by SMT)
+ */
+int pcm_rooted_station(struct s_smc *smc)
+{
+	int	n ;
+
+	for (n = 0 ; n < NUMPHYS ; n++) {
+		if (smc->y[n].mib->fddiPORTPCMState == PC8_ACTIVE &&
+		    smc->y[n].mib->fddiPORTNeighborType == TM)
+			return 0;
+	}
+	return 1;
+}
+
+/*
+ * Interrupt actions for PLC & PCM events
+ */
+void plc_irq(struct s_smc *smc, int np, unsigned int cmd)
+/* int np;	PHY index */
+{
+	struct s_phy *phy = &smc->y[np] ;
+	struct s_plc *plc = &phy->plc ;
+	int		n ;
+#ifdef	SUPERNET_3
+	int		corr_mask ;
+#endif	/* SUPERNET_3 */
+	int		i ;
+
+	if (np >= smc->s.numphys) {
+		plc->soft_err++ ;
+		return ;
+	}
+	if (cmd & PL_EBUF_ERR) {	/* elastic buff. det. over-|underflow*/
+		/*
+		 * Check whether the SRF Condition occurred.
+		 */
+		if (!plc->ebuf_cont && phy->mib->fddiPORTPCMState == PC8_ACTIVE){
+			/*
+			 * This is the real Elasticity Error.
+			 * More than one in a row are treated as a
+			 * single one.
+			 * Only count this in the active state.
+			 */
+			phy->mib->fddiPORTEBError_Ct ++ ;
+
+		}
+
+		plc->ebuf_err++ ;
+		if (plc->ebuf_cont <= 1000) {
+			/*
+			 * Prevent counter from being wrapped after
+			 * hanging years in that interrupt.
+			 */
+			plc->ebuf_cont++ ;	/* Ebuf continuous error */
+		}
+
+#ifdef	SUPERNET_3
+		if (plc->ebuf_cont == 1000 &&
+			((inpw(PLC(np,PL_STATUS_A)) & PLC_REV_MASK) ==
+			PLC_REV_SN3)) {
+			/*
+			 * This interrupt remeained high for at least
+			 * 1000 consecutive interrupt calls.
+			 *
+			 * This is caused by a hardware error of the
+			 * ORION part of the Supernet III chipset.
+			 *
+			 * Disable this bit from the mask.
+			 */
+			corr_mask = (plc_imsk_na & ~PL_EBUF_ERR) ;
+			outpw(PLC(np,PL_INTR_MASK),corr_mask);
+
+			/*
+			 * Disconnect from the ring.
+			 * Call the driver with the reset indication.
+			 */
+			queue_event(smc,EVENT_ECM,EC_DISCONNECT) ;
+
+			/*
+			 * Make an error log entry.
+			 */
+			SMT_ERR_LOG(smc,SMT_E0136, SMT_E0136_MSG) ;
+
+			/*
+			 * Indicate the Reset.
+			 */
+			drv_reset_indication(smc) ;
+		}
+#endif	/* SUPERNET_3 */
+	} else {
+		/* Reset the continuous error variable */
+		plc->ebuf_cont = 0 ;	/* reset Ebuf continuous error */
+	}
+	if (cmd & PL_PHYINV) {		/* physical layer invalid signal */
+		plc->phyinv++ ;
+	}
+	if (cmd & PL_VSYM_CTR) {	/* violation symbol counter has incr.*/
+		plc->vsym_ctr++ ;
+	}
+	if (cmd & PL_MINI_CTR) {	/* dep. on PLC_CNTRL_A's MINI_CTR_INT*/
+		plc->mini_ctr++ ;
+	}
+	if (cmd & PL_LE_CTR) {		/* link error event counter */
+		int	j ;
+
+		/*
+		 * note: PL_LINK_ERR_CTR MUST be read to clear it
+		 */
+		j = inpw(PLC(np,PL_LE_THRESHOLD)) ;
+		i = inpw(PLC(np,PL_LINK_ERR_CTR)) ;
+
+		if (i < j) {
+			/* wrapped around */
+			i += 256 ;
+		}
+
+		if (phy->lem.lem_on) {
+			/* Note: Lem errors shall only be counted when
+			 * link is ACTIVE or LCT is active.
+			 */
+			phy->lem.lem_errors += i ;
+			phy->mib->fddiPORTLem_Ct += i ;
+		}
+	}
+	if (cmd & PL_TPC_EXPIRED) {	/* TPC timer reached zero */
+		if (plc->p_state == PS_LCT) {
+			/*
+			 * end of LCT
+			 */
+			;
+		}
+		plc->tpc_exp++ ;
+	}
+	if (cmd & PL_LS_MATCH) {	/* LS == LS in PLC_CNTRL_B's MATCH_LS*/
+		switch (inpw(PLC(np,PL_CNTRL_B)) & PL_MATCH_LS) {
+		case PL_I_IDLE :	phy->curr_ls = PC_ILS ;		break ;
+		case PL_I_HALT :	phy->curr_ls = PC_HLS ;		break ;
+		case PL_I_MASTR :	phy->curr_ls = PC_MLS ;		break ;
+		case PL_I_QUIET :	phy->curr_ls = PC_QLS ;		break ;
+		}
+	}
+	if (cmd & PL_PCM_BREAK) {	/* PCM has entered the BREAK state */
+		int	reason;
+
+		reason = inpw(PLC(np,PL_STATUS_B)) & PL_BREAK_REASON ;
+
+		switch (reason) {
+		case PL_B_PCS :		plc->b_pcs++ ;	break ;
+		case PL_B_TPC :		plc->b_tpc++ ;	break ;
+		case PL_B_TNE :		plc->b_tne++ ;	break ;
+		case PL_B_QLS :		plc->b_qls++ ;	break ;
+		case PL_B_ILS :		plc->b_ils++ ;	break ;
+		case PL_B_HLS :		plc->b_hls++ ;	break ;
+		}
+
+		/*jd 05-Aug-1999 changed: Bug #10419 */
+		DB_PCMN(1,"PLC %d: MDcF = %x\n", np, smc->e.DisconnectFlag);
+		if (smc->e.DisconnectFlag == FALSE) {
+			DB_PCMN(1,"PLC %d: restart (reason %x)\n", np, reason);
+			queue_event(smc,EVENT_PCM+np,PC_START) ;
+		}
+		else {
+			DB_PCMN(1,"PLC %d: NO!! restart (reason %x)\n", np, reason);
+		}
+		return ;
+	}
+	/*
+	 * If both CODE & ENABLE are set ignore enable
+	 */
+	if (cmd & PL_PCM_CODE) { /* receive last sign.-bit | LCT complete */
+		queue_event(smc,EVENT_PCM+np,PC_SIGNAL) ;
+		n = inpw(PLC(np,PL_RCV_VECTOR)) ;
+		for (i = 0 ; i < plc->p_bits ; i++) {
+			phy->r_val[plc->p_start+i] = n & 1 ;
+			n >>= 1 ;
+		}
+	}
+	else if (cmd & PL_PCM_ENABLED) { /* asserted SC_JOIN, scrub.completed*/
+		queue_event(smc,EVENT_PCM+np,PC_JOIN) ;
+	}
+	if (cmd & PL_TRACE_PROP) {	/* MLS while PC8_ACTIV || PC2_TRACE */
+		/*PC22b*/
+		if (!phy->tr_flag) {
+			DB_PCMN(1,"PCM : irq TRACE_PROP %d %d\n",
+				np,smc->mib.fddiSMTECMState) ;
+			phy->tr_flag = TRUE ;
+			smc->e.trace_prop |= ENTITY_BIT(ENTITY_PHY(np)) ;
+			queue_event(smc,EVENT_ECM,EC_TRACE_PROP) ;
+		}
+	}
+	/*
+	 * filter PLC glitch ???
+	 * QLS || HLS only while in PC2_TRACE state
+	 */
+	if ((cmd & PL_SELF_TEST) && (phy->mib->fddiPORTPCMState == PC2_TRACE)) {
+		/*PC22a*/
+		if (smc->e.path_test == PT_PASSED) {
+			DB_PCMN(1,"PCM : state = %s %d\n", get_pcmstate(smc,np),
+				phy->mib->fddiPORTPCMState) ;
+
+			smc->e.path_test = PT_PENDING ;
+			queue_event(smc,EVENT_ECM,EC_PATH_TEST) ;
+		}
+	}
+	if (cmd & PL_TNE_EXPIRED) {	/* TNE: length of noise events */
+		/* break_required (TNE > NS_Max) */
+		if (phy->mib->fddiPORTPCMState == PC8_ACTIVE) {
+			if (!phy->tr_flag) {
+			   DB_PCMN(1,"PCM %c : PC81 %s\n",phy->phy_name,"NSE");
+			   queue_event(smc,EVENT_PCM+np,PC_START) ;
+			   return ;
+			}
+		}
+	}
+#if	0
+	if (cmd & PL_NP_ERR) {		/* NP has requested to r/w an inv reg*/
+		/*
+		 * It's a bug by AMD
+		 */
+		plc->np_err++ ;
+	}
+	/* pin inactiv (GND) */
+	if (cmd & PL_PARITY_ERR) {	/* p. error dedected on TX9-0 inp */
+		plc->parity_err++ ;
+	}
+	if (cmd & PL_LSDO) {		/* carrier detected */
+		;
+	}
+#endif
+}
+
+#ifdef	DEBUG
+/*
+ * fill state struct
+ */
+void pcm_get_state(struct s_smc *smc, struct smt_state *state)
+{
+	struct s_phy	*phy ;
+	struct pcm_state *pcs ;
+	int	i ;
+	int	ii ;
+	short	rbits ;
+	short	tbits ;
+	struct fddi_mib_p	*mib ;
+
+	for (i = 0, phy = smc->y, pcs = state->pcm_state ; i < NUMPHYS ;
+		i++ , phy++, pcs++ ) {
+		mib = phy->mib ;
+		pcs->pcm_type = (u_char) mib->fddiPORTMy_Type ;
+		pcs->pcm_state = (u_char) mib->fddiPORTPCMState ;
+		pcs->pcm_mode = phy->pc_mode ;
+		pcs->pcm_neighbor = (u_char) mib->fddiPORTNeighborType ;
+		pcs->pcm_bsf = mib->fddiPORTBS_Flag ;
+		pcs->pcm_lsf = phy->ls_flag ;
+		pcs->pcm_lct_fail = (u_char) mib->fddiPORTLCTFail_Ct ;
+		pcs->pcm_ls_rx = LS2MIB(sm_pm_get_ls(smc,i)) ;
+		for (ii = 0, rbits = tbits = 0 ; ii < NUMBITS ; ii++) {
+			rbits <<= 1 ;
+			tbits <<= 1 ;
+			if (phy->r_val[NUMBITS-1-ii])
+				rbits |= 1 ;
+			if (phy->t_val[NUMBITS-1-ii])
+				tbits |= 1 ;
+		}
+		pcs->pcm_r_val = rbits ;
+		pcs->pcm_t_val = tbits ;
+	}
+}
+
+int get_pcm_state(struct s_smc *smc, int np)
+{
+	int pcs ;
+
+	SK_UNUSED(smc) ;
+
+	switch (inpw(PLC(np,PL_STATUS_B)) & PL_PCM_STATE) {
+		case PL_PC0 :	pcs = PC_STOP ;		break ;
+		case PL_PC1 :	pcs = PC_START ;	break ;
+		case PL_PC2 :	pcs = PC_TRACE ;	break ;
+		case PL_PC3 :	pcs = PC_SIGNAL ;	break ;
+		case PL_PC4 :	pcs = PC_SIGNAL ;	break ;
+		case PL_PC5 :	pcs = PC_SIGNAL ;	break ;
+		case PL_PC6 :	pcs = PC_JOIN ;		break ;
+		case PL_PC7 :	pcs = PC_JOIN ;		break ;
+		case PL_PC8 :	pcs = PC_ENABLE ;	break ;
+		case PL_PC9 :	pcs = PC_MAINT ;	break ;
+		default :	pcs = PC_DISABLE ; 	break ;
+	}
+	return pcs;
+}
+
+char *get_linestate(struct s_smc *smc, int np)
+{
+	char *ls = "" ;
+
+	SK_UNUSED(smc) ;
+
+	switch (inpw(PLC(np,PL_STATUS_A)) & PL_LINE_ST) {
+		case PL_L_NLS :	ls = "NOISE" ;	break ;
+		case PL_L_ALS :	ls = "ACTIV" ;	break ;
+		case PL_L_UND :	ls = "UNDEF" ;	break ;
+		case PL_L_ILS4:	ls = "ILS 4" ;	break ;
+		case PL_L_QLS :	ls = "QLS" ;	break ;
+		case PL_L_MLS :	ls = "MLS" ;	break ;
+		case PL_L_HLS :	ls = "HLS" ;	break ;
+		case PL_L_ILS16:ls = "ILS16" ;	break ;
+#ifdef	lint
+		default:	ls = "unknown" ; break ;
+#endif
+	}
+	return ls;
+}
+
+char *get_pcmstate(struct s_smc *smc, int np)
+{
+	char *pcs ;
+	
+	SK_UNUSED(smc) ;
+
+	switch (inpw(PLC(np,PL_STATUS_B)) & PL_PCM_STATE) {
+		case PL_PC0 :	pcs = "OFF" ;		break ;
+		case PL_PC1 :	pcs = "BREAK" ;		break ;
+		case PL_PC2 :	pcs = "TRACE" ;		break ;
+		case PL_PC3 :	pcs = "CONNECT";	break ;
+		case PL_PC4 :	pcs = "NEXT" ;		break ;
+		case PL_PC5 :	pcs = "SIGNAL" ;	break ;
+		case PL_PC6 :	pcs = "JOIN" ;		break ;
+		case PL_PC7 :	pcs = "VERIFY" ;	break ;
+		case PL_PC8 :	pcs = "ACTIV" ;		break ;
+		case PL_PC9 :	pcs = "MAINT" ;		break ;
+		default :	pcs = "UNKNOWN" ; 	break ;
+	}
+	return pcs;
+}
+
+void list_phy(struct s_smc *smc)
+{
+	struct s_plc *plc ;
+	int np ;
+
+	for (np = 0 ; np < NUMPHYS ; np++) {
+		plc  = &smc->y[np].plc ;
+		printf("PHY %d:\tERRORS\t\t\tBREAK_REASONS\t\tSTATES:\n",np) ;
+		printf("\tsoft_error: %ld \t\tPC_Start : %ld\n",
+						plc->soft_err,plc->b_pcs);
+		printf("\tparity_err: %ld \t\tTPC exp. : %ld\t\tLine: %s\n",
+			plc->parity_err,plc->b_tpc,get_linestate(smc,np)) ;
+		printf("\tebuf_error: %ld \t\tTNE exp. : %ld\n",
+						plc->ebuf_err,plc->b_tne) ;
+		printf("\tphyinvalid: %ld \t\tQLS det. : %ld\t\tPCM : %s\n",
+			plc->phyinv,plc->b_qls,get_pcmstate(smc,np)) ;
+		printf("\tviosym_ctr: %ld \t\tILS det. : %ld\n",
+						plc->vsym_ctr,plc->b_ils)  ;
+		printf("\tmingap_ctr: %ld \t\tHLS det. : %ld\n",
+						plc->mini_ctr,plc->b_hls) ;
+		printf("\tnodepr_err: %ld\n",plc->np_err) ;
+		printf("\tTPC_exp : %ld\n",plc->tpc_exp) ;
+		printf("\tLEM_err : %ld\n",smc->y[np].lem.lem_errors) ;
+	}
+}
+
+
+#ifdef	CONCENTRATOR
+void pcm_lem_dump(struct s_smc *smc)
+{
+	int		i ;
+	struct s_phy	*phy ;
+	struct fddi_mib_p	*mib ;
+
+	char		*entostring() ;
+
+	printf("PHY	errors	BER\n") ;
+	printf("----------------------\n") ;
+	for (i = 0,phy = smc->y ; i < NUMPHYS ; i++,phy++) {
+		if (!plc_is_installed(smc,i))
+			continue ;
+		mib = phy->mib ;
+		printf("%s\t%ld\t10E-%d\n",
+			entostring(smc,ENTITY_PHY(i)),
+			mib->fddiPORTLem_Ct,
+			mib->fddiPORTLer_Estimate) ;
+	}
+}
+#endif
+#endif
diff --git a/drivers/net/fddi/skfp/pmf.c b/drivers/net/fddi/skfp/pmf.c
new file mode 100644
index 0000000..9ac4665
--- /dev/null
+++ b/drivers/net/fddi/skfp/pmf.c
@@ -0,0 +1,1663 @@
+/******************************************************************************
+ *
+ *	(C)Copyright 1998,1999 SysKonnect,
+ *	a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ *	See the file "skfddi.c" for further information.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+	Parameter Management Frame processing for SMT 7.2
+*/
+
+#include "h/types.h"
+#include "h/fddi.h"
+#include "h/smc.h"
+#include "h/smt_p.h"
+
+#define KERNEL
+#include "h/smtstate.h"
+
+#ifndef	SLIM_SMT
+
+#ifndef	lint
+static const char ID_sccs[] = "@(#)pmf.c	1.37 97/08/04 (C) SK " ;
+#endif
+
+static int smt_authorize(struct s_smc *smc, struct smt_header *sm);
+static int smt_check_set_count(struct s_smc *smc, struct smt_header *sm);
+static const struct s_p_tab* smt_get_ptab(u_short para);
+static int smt_mib_phys(struct s_smc *smc);
+static int smt_set_para(struct s_smc *smc, struct smt_para *pa, int index,
+			int local, int set);
+void smt_add_para(struct s_smc *smc, struct s_pcon *pcon, u_short para,
+		  int index, int local);
+static SMbuf *smt_build_pmf_response(struct s_smc *smc, struct smt_header *req,
+				     int set, int local);
+static int port_to_mib(struct s_smc *smc, int p);
+
+#define MOFFSS(e)	offsetof(struct fddi_mib, e)
+#define MOFFMS(e)	offsetof(struct fddi_mib_m, e)
+#define MOFFAS(e)	offsetof(struct fddi_mib_a, e)
+#define MOFFPS(e)	offsetof(struct fddi_mib_p, e)
+
+
+#define AC_G	0x01		/* Get */
+#define AC_GR	0x02		/* Get/Set */
+#define AC_S	0x04		/* Set */
+#define AC_NA	0x08
+#define AC_GROUP	0x10		/* Group */
+#define MS2BCLK(x)	((x)*12500L)
+/*
+	F	LFag (byte)
+	B	byte
+	S	u_short	16 bit
+	C	Counter 32 bit
+	L	Long 32 bit
+	T	Timer_2	32 bit
+	P	TimeStamp ;
+	A	LongAddress (6 byte)
+	E	Enum 16 bit
+	R	ResId 16 Bit
+*/
+static const struct s_p_tab {
+	u_short	p_num ;		/* parameter code */
+	u_char	p_access ;	/* access rights */
+	u_short	p_offset ;	/* offset in mib */
+	char	p_swap[3] ;	/* format string */
+} p_tab[] = {
+	/* StationIdGrp */
+	{ SMT_P100A,AC_GROUP	} ,
+	{ SMT_P100B,AC_G,	MOFFSS(fddiSMTStationId),	"8"	} ,
+	{ SMT_P100D,AC_G,	MOFFSS(fddiSMTOpVersionId),	"S"	} ,
+	{ SMT_P100E,AC_G,	MOFFSS(fddiSMTHiVersionId),	"S"	} ,
+	{ SMT_P100F,AC_G,	MOFFSS(fddiSMTLoVersionId),	"S"	} ,
+	{ SMT_P1010,AC_G,	MOFFSS(fddiSMTManufacturerData), "D" } ,
+	{ SMT_P1011,AC_GR,	MOFFSS(fddiSMTUserData),	"D"	} ,
+	{ SMT_P1012,AC_G,	MOFFSS(fddiSMTMIBVersionId),	"S"	} ,
+
+	/* StationConfigGrp */
+	{ SMT_P1014,AC_GROUP	} ,
+	{ SMT_P1015,AC_G,	MOFFSS(fddiSMTMac_Ct),		"B"	} ,
+	{ SMT_P1016,AC_G,	MOFFSS(fddiSMTNonMaster_Ct),	"B"	} ,
+	{ SMT_P1017,AC_G,	MOFFSS(fddiSMTMaster_Ct),	"B"	} ,
+	{ SMT_P1018,AC_G,	MOFFSS(fddiSMTAvailablePaths),	"B"	} ,
+	{ SMT_P1019,AC_G,	MOFFSS(fddiSMTConfigCapabilities),"S"	} ,
+	{ SMT_P101A,AC_GR,	MOFFSS(fddiSMTConfigPolicy),	"wS"	} ,
+	{ SMT_P101B,AC_GR,	MOFFSS(fddiSMTConnectionPolicy),"wS"	} ,
+	{ SMT_P101D,AC_GR,	MOFFSS(fddiSMTTT_Notify),	"wS"	} ,
+	{ SMT_P101E,AC_GR,	MOFFSS(fddiSMTStatRptPolicy),	"bB"	} ,
+	{ SMT_P101F,AC_GR,	MOFFSS(fddiSMTTrace_MaxExpiration),"lL"	} ,
+	{ SMT_P1020,AC_G,	MOFFSS(fddiSMTPORTIndexes),	"II"	} ,
+	{ SMT_P1021,AC_G,	MOFFSS(fddiSMTMACIndexes),	"I"	} ,
+	{ SMT_P1022,AC_G,	MOFFSS(fddiSMTBypassPresent),	"F"	} ,
+
+	/* StatusGrp */
+	{ SMT_P1028,AC_GROUP	} ,
+	{ SMT_P1029,AC_G,	MOFFSS(fddiSMTECMState),	"E"	} ,
+	{ SMT_P102A,AC_G,	MOFFSS(fddiSMTCF_State),	"E"	} ,
+	{ SMT_P102C,AC_G,	MOFFSS(fddiSMTRemoteDisconnectFlag),"F"	} ,
+	{ SMT_P102D,AC_G,	MOFFSS(fddiSMTStationStatus),	"E"	} ,
+	{ SMT_P102E,AC_G,	MOFFSS(fddiSMTPeerWrapFlag),	"F"	} ,
+
+	/* MIBOperationGrp */
+	{ SMT_P1032,AC_GROUP	} ,
+	{ SMT_P1033,AC_G,	MOFFSS(fddiSMTTimeStamp),"P"		} ,
+	{ SMT_P1034,AC_G,	MOFFSS(fddiSMTTransitionTimeStamp),"P"	} ,
+	/* NOTE : SMT_P1035 is already swapped ! SMT_P_SETCOUNT */
+	{ SMT_P1035,AC_G,	MOFFSS(fddiSMTSetCount),"4P"		} ,
+	{ SMT_P1036,AC_G,	MOFFSS(fddiSMTLastSetStationId),"8"	} ,
+
+	{ SMT_P103C,AC_S,	0,				"wS"	} ,
+
+	/*
+	 * PRIVATE EXTENSIONS
+	 * only accessible locally to get/set passwd
+	 */
+	{ SMT_P10F0,AC_GR,	MOFFSS(fddiPRPMFPasswd),	"8"	} ,
+	{ SMT_P10F1,AC_GR,	MOFFSS(fddiPRPMFStation),	"8"	} ,
+#ifdef	ESS
+	{ SMT_P10F2,AC_GR,	MOFFSS(fddiESSPayload),		"lL"	} ,
+	{ SMT_P10F3,AC_GR,	MOFFSS(fddiESSOverhead),	"lL"	} ,
+	{ SMT_P10F4,AC_GR,	MOFFSS(fddiESSMaxTNeg),		"lL"	} ,
+	{ SMT_P10F5,AC_GR,	MOFFSS(fddiESSMinSegmentSize),	"lL"	} ,
+	{ SMT_P10F6,AC_GR,	MOFFSS(fddiESSCategory),	"lL"	} ,
+	{ SMT_P10F7,AC_GR,	MOFFSS(fddiESSSynchTxMode),	"wS"	} ,
+#endif
+#ifdef	SBA
+	{ SMT_P10F8,AC_GR,	MOFFSS(fddiSBACommand),		"bF"	} ,
+	{ SMT_P10F9,AC_GR,	MOFFSS(fddiSBAAvailable),	"bF"	} ,
+#endif
+	/* MAC Attributes */
+	{ SMT_P200A,AC_GROUP	} ,
+	{ SMT_P200B,AC_G,	MOFFMS(fddiMACFrameStatusFunctions),"S"	} ,
+	{ SMT_P200D,AC_G,	MOFFMS(fddiMACT_MaxCapabilitiy),"T"	} ,
+	{ SMT_P200E,AC_G,	MOFFMS(fddiMACTVXCapabilitiy),"T"	} ,
+
+	/* ConfigGrp */
+	{ SMT_P2014,AC_GROUP	} ,
+	{ SMT_P2016,AC_G,	MOFFMS(fddiMACAvailablePaths),	"B"	} ,
+	{ SMT_P2017,AC_G,	MOFFMS(fddiMACCurrentPath),	"S"	} ,
+	{ SMT_P2018,AC_G,	MOFFMS(fddiMACUpstreamNbr),	"A"	} ,
+	{ SMT_P2019,AC_G,	MOFFMS(fddiMACDownstreamNbr),	"A"	} ,
+	{ SMT_P201A,AC_G,	MOFFMS(fddiMACOldUpstreamNbr),	"A"	} ,
+	{ SMT_P201B,AC_G,	MOFFMS(fddiMACOldDownstreamNbr),"A"	} ,
+	{ SMT_P201D,AC_G,	MOFFMS(fddiMACDupAddressTest),	"E"	} ,
+	{ SMT_P2020,AC_GR,	MOFFMS(fddiMACRequestedPaths),	"wS"	} ,
+	{ SMT_P2021,AC_G,	MOFFMS(fddiMACDownstreamPORTType),"E"	} ,
+	{ SMT_P2022,AC_G,	MOFFMS(fddiMACIndex),		"S"	} ,
+
+	/* AddressGrp */
+	{ SMT_P2028,AC_GROUP	} ,
+	{ SMT_P2029,AC_G,	MOFFMS(fddiMACSMTAddress),	"A"	} ,
+
+	/* OperationGrp */
+	{ SMT_P2032,AC_GROUP	} ,
+	{ SMT_P2033,AC_G,	MOFFMS(fddiMACT_Req),		"T"	} ,
+	{ SMT_P2034,AC_G,	MOFFMS(fddiMACT_Neg),		"T"	} ,
+	{ SMT_P2035,AC_G,	MOFFMS(fddiMACT_Max),		"T"	} ,
+	{ SMT_P2036,AC_G,	MOFFMS(fddiMACTvxValue),	"T"	} ,
+	{ SMT_P2038,AC_G,	MOFFMS(fddiMACT_Pri0),		"T"	} ,
+	{ SMT_P2039,AC_G,	MOFFMS(fddiMACT_Pri1),		"T"	} ,
+	{ SMT_P203A,AC_G,	MOFFMS(fddiMACT_Pri2),		"T"	} ,
+	{ SMT_P203B,AC_G,	MOFFMS(fddiMACT_Pri3),		"T"	} ,
+	{ SMT_P203C,AC_G,	MOFFMS(fddiMACT_Pri4),		"T"	} ,
+	{ SMT_P203D,AC_G,	MOFFMS(fddiMACT_Pri5),		"T"	} ,
+	{ SMT_P203E,AC_G,	MOFFMS(fddiMACT_Pri6),		"T"	} ,
+
+
+	/* CountersGrp */
+	{ SMT_P2046,AC_GROUP	} ,
+	{ SMT_P2047,AC_G,	MOFFMS(fddiMACFrame_Ct),	"C"	} ,
+	{ SMT_P2048,AC_G,	MOFFMS(fddiMACCopied_Ct),	"C"	} ,
+	{ SMT_P2049,AC_G,	MOFFMS(fddiMACTransmit_Ct),	"C"	} ,
+	{ SMT_P204A,AC_G,	MOFFMS(fddiMACToken_Ct),	"C"	} ,
+	{ SMT_P2051,AC_G,	MOFFMS(fddiMACError_Ct),	"C"	} ,
+	{ SMT_P2052,AC_G,	MOFFMS(fddiMACLost_Ct),		"C"	} ,
+	{ SMT_P2053,AC_G,	MOFFMS(fddiMACTvxExpired_Ct),	"C"	} ,
+	{ SMT_P2054,AC_G,	MOFFMS(fddiMACNotCopied_Ct),	"C"	} ,
+	{ SMT_P2056,AC_G,	MOFFMS(fddiMACRingOp_Ct),	"C"	} ,
+
+	/* FrameErrorConditionGrp */
+	{ SMT_P205A,AC_GROUP	} ,
+	{ SMT_P205F,AC_GR,	MOFFMS(fddiMACFrameErrorThreshold),"wS"	} ,
+	{ SMT_P2060,AC_G,	MOFFMS(fddiMACFrameErrorRatio),	"S"	} ,
+
+	/* NotCopiedConditionGrp */
+	{ SMT_P2064,AC_GROUP	} ,
+	{ SMT_P2067,AC_GR,	MOFFMS(fddiMACNotCopiedThreshold),"wS"	} ,
+	{ SMT_P2069,AC_G,	MOFFMS(fddiMACNotCopiedRatio),	"S"	} ,
+
+	/* StatusGrp */
+	{ SMT_P206E,AC_GROUP	} ,
+	{ SMT_P206F,AC_G,	MOFFMS(fddiMACRMTState),	"S"	} ,
+	{ SMT_P2070,AC_G,	MOFFMS(fddiMACDA_Flag),	"F"	} ,
+	{ SMT_P2071,AC_G,	MOFFMS(fddiMACUNDA_Flag),	"F"	} ,
+	{ SMT_P2072,AC_G,	MOFFMS(fddiMACFrameErrorFlag),	"F"	} ,
+	{ SMT_P2073,AC_G,	MOFFMS(fddiMACNotCopiedFlag),	"F"	} ,
+	{ SMT_P2074,AC_G,	MOFFMS(fddiMACMA_UnitdataAvailable),"F"	} ,
+	{ SMT_P2075,AC_G,	MOFFMS(fddiMACHardwarePresent),	"F"	} ,
+	{ SMT_P2076,AC_GR,	MOFFMS(fddiMACMA_UnitdataEnable),"bF"	} ,
+
+	/*
+	 * PRIVATE EXTENSIONS
+	 * only accessible locally to get/set TMIN
+	 */
+	{ SMT_P20F0,AC_NA						} ,
+	{ SMT_P20F1,AC_GR,	MOFFMS(fddiMACT_Min),		"lT"	} ,
+
+	/* Path Attributes */
+	/*
+	 * DON't swap 320B,320F,3210: they are already swapped in swap_para()
+	 */
+	{ SMT_P320A,AC_GROUP	} ,
+	{ SMT_P320B,AC_G,	MOFFAS(fddiPATHIndex),		"r"	} ,
+	{ SMT_P320F,AC_GR,	MOFFAS(fddiPATHSbaPayload),	"l4"	} ,
+	{ SMT_P3210,AC_GR,	MOFFAS(fddiPATHSbaOverhead),	"l4"	} ,
+	/* fddiPATHConfiguration */
+	{ SMT_P3212,AC_G,	0,				""	} ,
+	{ SMT_P3213,AC_GR,	MOFFAS(fddiPATHT_Rmode),	"lT"	} ,
+	{ SMT_P3214,AC_GR,	MOFFAS(fddiPATHSbaAvailable),	"lL"	} ,
+	{ SMT_P3215,AC_GR,	MOFFAS(fddiPATHTVXLowerBound),	"lT"	} ,
+	{ SMT_P3216,AC_GR,	MOFFAS(fddiPATHT_MaxLowerBound),"lT"	} ,
+	{ SMT_P3217,AC_GR,	MOFFAS(fddiPATHMaxT_Req),	"lT"	} ,
+
+	/* Port Attributes */
+	/* ConfigGrp */
+	{ SMT_P400A,AC_GROUP	} ,
+	{ SMT_P400C,AC_G,	MOFFPS(fddiPORTMy_Type),	"E"	} ,
+	{ SMT_P400D,AC_G,	MOFFPS(fddiPORTNeighborType),	"E"	} ,
+	{ SMT_P400E,AC_GR,	MOFFPS(fddiPORTConnectionPolicies),"bB"	} ,
+	{ SMT_P400F,AC_G,	MOFFPS(fddiPORTMacIndicated),	"2"	} ,
+	{ SMT_P4010,AC_G,	MOFFPS(fddiPORTCurrentPath),	"E"	} ,
+	{ SMT_P4011,AC_GR,	MOFFPS(fddiPORTRequestedPaths),	"l4"	} ,
+	{ SMT_P4012,AC_G,	MOFFPS(fddiPORTMACPlacement),	"S"	} ,
+	{ SMT_P4013,AC_G,	MOFFPS(fddiPORTAvailablePaths),	"B"	} ,
+	{ SMT_P4016,AC_G,	MOFFPS(fddiPORTPMDClass),	"E"	} ,
+	{ SMT_P4017,AC_G,	MOFFPS(fddiPORTConnectionCapabilities),	"B"} ,
+	{ SMT_P401D,AC_G,	MOFFPS(fddiPORTIndex),		"R"	} ,
+
+	/* OperationGrp */
+	{ SMT_P401E,AC_GROUP	} ,
+	{ SMT_P401F,AC_GR,	MOFFPS(fddiPORTMaint_LS),	"wE"	} ,
+	{ SMT_P4021,AC_G,	MOFFPS(fddiPORTBS_Flag),	"F"	} ,
+	{ SMT_P4022,AC_G,	MOFFPS(fddiPORTPC_LS),		"E"	} ,
+
+	/* ErrorCtrsGrp */
+	{ SMT_P4028,AC_GROUP	} ,
+	{ SMT_P4029,AC_G,	MOFFPS(fddiPORTEBError_Ct),	"C"	} ,
+	{ SMT_P402A,AC_G,	MOFFPS(fddiPORTLCTFail_Ct),	"C"	} ,
+
+	/* LerGrp */
+	{ SMT_P4032,AC_GROUP	} ,
+	{ SMT_P4033,AC_G,	MOFFPS(fddiPORTLer_Estimate),	"F"	} ,
+	{ SMT_P4034,AC_G,	MOFFPS(fddiPORTLem_Reject_Ct),	"C"	} ,
+	{ SMT_P4035,AC_G,	MOFFPS(fddiPORTLem_Ct),		"C"	} ,
+	{ SMT_P403A,AC_GR,	MOFFPS(fddiPORTLer_Cutoff),	"bB"	} ,
+	{ SMT_P403B,AC_GR,	MOFFPS(fddiPORTLer_Alarm),	"bB"	} ,
+
+	/* StatusGrp */
+	{ SMT_P403C,AC_GROUP	} ,
+	{ SMT_P403D,AC_G,	MOFFPS(fddiPORTConnectState),	"E"	} ,
+	{ SMT_P403E,AC_G,	MOFFPS(fddiPORTPCMStateX),	"E"	} ,
+	{ SMT_P403F,AC_G,	MOFFPS(fddiPORTPC_Withhold),	"E"	} ,
+	{ SMT_P4040,AC_G,	MOFFPS(fddiPORTLerFlag),	"F"	} ,
+	{ SMT_P4041,AC_G,	MOFFPS(fddiPORTHardwarePresent),"F"	} ,
+
+	{ SMT_P4046,AC_S,	0,				"wS"	} ,
+
+	{ 0,	AC_GROUP	} ,
+	{ 0 }
+} ;
+
+void smt_pmf_received_pack(struct s_smc *smc, SMbuf *mb, int local)
+{
+	struct smt_header	*sm ;
+	SMbuf		*reply ;
+
+	sm = smtod(mb,struct smt_header *) ;
+	DB_SMT("SMT: processing PMF frame at %x len %d\n",sm,mb->sm_len) ;
+#ifdef	DEBUG
+	dump_smt(smc,sm,"PMF Received") ;
+#endif
+	/*
+	 * Start the watchdog: It may be a long, long packet and
+	 * maybe the watchdog occurs ...
+	 */
+	smt_start_watchdog(smc) ;
+
+	if (sm->smt_class == SMT_PMF_GET ||
+	    sm->smt_class == SMT_PMF_SET) {
+		reply = smt_build_pmf_response(smc,sm,
+			sm->smt_class == SMT_PMF_SET,local) ;
+		if (reply) {
+			sm = smtod(reply,struct smt_header *) ;
+#ifdef	DEBUG
+			dump_smt(smc,sm,"PMF Reply") ;
+#endif
+			smt_send_frame(smc,reply,FC_SMT_INFO,local) ;
+		}
+	}
+}
+
+static SMbuf *smt_build_pmf_response(struct s_smc *smc, struct smt_header *req,
+				     int set, int local)
+{
+	SMbuf			*mb ;
+	struct smt_header	*smt ;
+	struct smt_para		*pa ;
+	struct smt_p_reason	*res ;
+	const struct s_p_tab	*pt ;
+	int			len ;
+	int			index ;
+	int			idx_end ;
+	int			error ;
+	int			range ;
+	SK_LOC_DECL(struct s_pcon,pcon) ;
+	SK_LOC_DECL(struct s_pcon,set_pcon) ;
+
+	/*
+	 * build SMT header
+	 */
+	if (!(mb = smt_get_mbuf(smc)))
+		return mb;
+
+	smt = smtod(mb, struct smt_header *) ;
+	smt->smt_dest = req->smt_source ;	/* DA == source of request */
+	smt->smt_class = req->smt_class ;	/* same class (GET/SET) */
+	smt->smt_type = SMT_REPLY ;
+	smt->smt_version = SMT_VID_2 ;
+	smt->smt_tid = req->smt_tid ;		/* same TID */
+	smt->smt_pad = 0 ;
+	smt->smt_len = 0 ;
+
+	/*
+	 * setup parameter status
+	 */
+	pcon.pc_len = SMT_MAX_INFO_LEN ;	/* max para length */
+	pcon.pc_err = 0 ;			/* no error */
+	pcon.pc_badset = 0 ;			/* no bad set count */
+	pcon.pc_p = (void *) (smt + 1) ;	/* paras start here */
+
+	/*
+	 * check authoriziation and set count
+	 */
+	error = 0 ;
+	if (set) {
+		if (!local && smt_authorize(smc,req))
+			error = SMT_RDF_AUTHOR ;
+		else if (smt_check_set_count(smc,req))
+			pcon.pc_badset = SMT_RDF_BADSET ;
+	}
+	/*
+	 * add reason code and all mandatory parameters
+	 */
+	res = (struct smt_p_reason *) pcon.pc_p ;
+	smt_add_para(smc,&pcon,(u_short) SMT_P_REASON,0,0) ;
+	smt_add_para(smc,&pcon,(u_short) SMT_P1033,0,0) ;
+	/* update 1035 and 1036 later if set */
+	set_pcon = pcon ;
+	smt_add_para(smc,&pcon,(u_short) SMT_P1035,0,0) ;
+	smt_add_para(smc,&pcon,(u_short) SMT_P1036,0,0) ;
+
+	pcon.pc_err = error ;
+	len = req->smt_len ;
+	pa = (struct smt_para *) (req + 1) ;
+	/*
+	 * process list of paras
+	 */
+	while (!pcon.pc_err && len > 0 ) {
+		if (((u_short)len < pa->p_len + PARA_LEN) || (pa->p_len & 3)) {
+			pcon.pc_err = SMT_RDF_LENGTH ;
+			break ;
+		}
+
+		if (((range = (pa->p_type & 0xf000)) == 0x2000) ||
+			range == 0x3000 || range == 0x4000) {
+			/*
+			 * get index for PART,MAC ad PATH group
+			 */
+			index = *((u_char *)pa + PARA_LEN + 3) ;/* index */
+			idx_end = index ;
+			if (!set && (pa->p_len != 4)) {
+				pcon.pc_err = SMT_RDF_LENGTH ;
+				break ;
+			}
+			if (!index && !set) {
+				switch (range) {
+				case 0x2000 :
+					index = INDEX_MAC ;
+					idx_end = index - 1 + NUMMACS ;
+					break ;
+				case 0x3000 :
+					index = INDEX_PATH ;
+					idx_end = index - 1 + NUMPATHS ;
+					break ;
+				case 0x4000 :
+					index = INDEX_PORT ;
+					idx_end = index - 1 + NUMPHYS ;
+#ifndef	CONCENTRATOR
+					if (smc->s.sas == SMT_SAS)
+						idx_end = INDEX_PORT ;
+#endif
+					break ;
+				}
+			}
+		}
+		else {
+			/*
+			 * smt group has no index
+			 */
+			if (!set && (pa->p_len != 0)) {
+				pcon.pc_err = SMT_RDF_LENGTH ;
+				break ;
+			}
+			index = 0 ;
+			idx_end = 0 ;
+		}
+		while (index <= idx_end) {
+			/*
+			 * if group
+			 *	add all paras of group
+			 */
+			pt = smt_get_ptab(pa->p_type) ;
+			if (pt && pt->p_access == AC_GROUP && !set) {
+				pt++ ;
+				while (pt->p_access == AC_G ||
+					pt->p_access == AC_GR) {
+					smt_add_para(smc,&pcon,pt->p_num,
+						index,local);
+					pt++ ;
+				}
+			}
+			/*
+			 * ignore
+			 *	AUTHORIZATION in get/set
+			 *	SET COUNT in set
+			 */
+			else if (pa->p_type != SMT_P_AUTHOR &&
+				 (!set || (pa->p_type != SMT_P1035))) {
+				int	st ;
+				if (pcon.pc_badset) {
+					smt_add_para(smc,&pcon,pa->p_type,
+						index,local) ;
+				}
+				else if (set) {
+					st = smt_set_para(smc,pa,index,local,1);
+					/*
+					 * return para even if error
+					 */
+					smt_add_para(smc,&pcon,pa->p_type,
+						index,local) ;
+					pcon.pc_err = st ;
+				}
+				else {
+					if (pt && pt->p_access == AC_S) {
+						pcon.pc_err =
+							SMT_RDF_ILLEGAL ;
+					}
+					smt_add_para(smc,&pcon,pa->p_type,
+						index,local) ;
+				}
+			}
+			if (pcon.pc_err)
+				break ;
+			index++ ;
+		}
+		len -= pa->p_len + PARA_LEN ;
+		pa = (struct smt_para *) ((char *)pa + pa->p_len + PARA_LEN) ;
+	}
+	smt->smt_len = SMT_MAX_INFO_LEN - pcon.pc_len ;
+	mb->sm_len = smt->smt_len + sizeof(struct smt_header) ;
+
+	/* update reason code */
+	res->rdf_reason = pcon.pc_badset ? pcon.pc_badset :
+			pcon.pc_err ? pcon.pc_err : SMT_RDF_SUCCESS ;
+	if (set && (res->rdf_reason == SMT_RDF_SUCCESS)) {
+		/*
+		 * increment set count
+		 * set time stamp
+		 * store station id of last set
+		 */
+		smc->mib.fddiSMTSetCount.count++ ;
+		smt_set_timestamp(smc,smc->mib.fddiSMTSetCount.timestamp) ;
+		smc->mib.fddiSMTLastSetStationId = req->smt_sid ;
+		smt_add_para(smc,&set_pcon,(u_short) SMT_P1035,0,0) ;
+		smt_add_para(smc,&set_pcon,(u_short) SMT_P1036,0,0) ;
+	}
+	return mb;
+}
+
+static int smt_authorize(struct s_smc *smc, struct smt_header *sm)
+{
+	struct smt_para	*pa ;
+	int		i ;
+	char		*p ;
+
+	/*
+	 * check source station id if not zero
+	 */
+	p = (char *) &smc->mib.fddiPRPMFStation ;
+	for (i = 0 ; i < 8 && !p[i] ; i++)
+		;
+	if (i != 8) {
+		if (memcmp((char *) &sm->smt_sid,
+			(char *) &smc->mib.fddiPRPMFStation,8))
+			return 1;
+	}
+	/*
+	 * check authoriziation parameter if passwd not zero
+	 */
+	p = (char *) smc->mib.fddiPRPMFPasswd ;
+	for (i = 0 ; i < 8 && !p[i] ; i++)
+		;
+	if (i != 8) {
+		pa = (struct smt_para *) sm_to_para(smc,sm,SMT_P_AUTHOR) ;
+		if (!pa)
+			return 1;
+		if (pa->p_len != 8)
+			return 1;
+		if (memcmp((char *)(pa+1),(char *)smc->mib.fddiPRPMFPasswd,8))
+			return 1;
+	}
+	return 0;
+}
+
+static int smt_check_set_count(struct s_smc *smc, struct smt_header *sm)
+{
+	struct smt_para	*pa ;
+	struct smt_p_setcount	*sc ;
+
+	pa = (struct smt_para *) sm_to_para(smc,sm,SMT_P1035) ;
+	if (pa) {
+		sc = (struct smt_p_setcount *) pa ;
+		if ((smc->mib.fddiSMTSetCount.count != sc->count) ||
+			memcmp((char *) smc->mib.fddiSMTSetCount.timestamp,
+			(char *)sc->timestamp,8))
+			return 1;
+	}
+	return 0;
+}
+
+void smt_add_para(struct s_smc *smc, struct s_pcon *pcon, u_short para,
+		  int index, int local)
+{
+	struct smt_para	*pa ;
+	const struct s_p_tab	*pt ;
+	struct fddi_mib_m *mib_m = NULL;
+	struct fddi_mib_p *mib_p = NULL;
+	int		len ;
+	int		plen ;
+	char		*from ;
+	char		*to ;
+	const char	*swap ;
+	char		c ;
+	int		range ;
+	char		*mib_addr ;
+	int		mac ;
+	int		path ;
+	int		port ;
+	int		sp_len ;
+
+	/*
+	 * skip if error
+	 */
+	if (pcon->pc_err)
+		return ;
+
+	/*
+	 * actions don't have a value
+	 */
+	pt = smt_get_ptab(para) ;
+	if (pt && pt->p_access == AC_S)
+		return ;
+
+	to = (char *) (pcon->pc_p) ;	/* destination pointer */
+	len = pcon->pc_len ;		/* free space */
+	plen = len ;			/* remember start length */
+	pa = (struct smt_para *) to ;	/* type/length pointer */
+	to += PARA_LEN ;		/* skip smt_para */
+	len -= PARA_LEN ;
+	/*
+	 * set index if required
+	 */
+	if (((range = (para & 0xf000)) == 0x2000) ||
+		range == 0x3000 || range == 0x4000) {
+		if (len < 4)
+			goto wrong_error ;
+		to[0] = 0 ;
+		to[1] = 0 ;
+		to[2] = 0 ;
+		to[3] = index ;
+		len -= 4 ;
+		to += 4 ;
+	}
+	mac = index - INDEX_MAC ;
+	path = index - INDEX_PATH ;
+	port = index - INDEX_PORT ;
+	/*
+	 * get pointer to mib
+	 */
+	switch (range) {
+	case 0x1000 :
+	default :
+		mib_addr = (char *) (&smc->mib) ;
+		break ;
+	case 0x2000 :
+		if (mac < 0 || mac >= NUMMACS) {
+			pcon->pc_err = SMT_RDF_NOPARAM ;
+			return ;
+		}
+		mib_addr = (char *) (&smc->mib.m[mac]) ;
+		mib_m = (struct fddi_mib_m *) mib_addr ;
+		break ;
+	case 0x3000 :
+		if (path < 0 || path >= NUMPATHS) {
+			pcon->pc_err = SMT_RDF_NOPARAM ;
+			return ;
+		}
+		mib_addr = (char *) (&smc->mib.a[path]) ;
+		break ;
+	case 0x4000 :
+		if (port < 0 || port >= smt_mib_phys(smc)) {
+			pcon->pc_err = SMT_RDF_NOPARAM ;
+			return ;
+		}
+		mib_addr = (char *) (&smc->mib.p[port_to_mib(smc,port)]) ;
+		mib_p = (struct fddi_mib_p *) mib_addr ;
+		break ;
+	}
+	/*
+	 * check special paras
+	 */
+	swap = NULL;
+	switch (para) {
+	case SMT_P10F0 :
+	case SMT_P10F1 :
+#ifdef	ESS
+	case SMT_P10F2 :
+	case SMT_P10F3 :
+	case SMT_P10F4 :
+	case SMT_P10F5 :
+	case SMT_P10F6 :
+	case SMT_P10F7 :
+#endif
+#ifdef	SBA
+	case SMT_P10F8 :
+	case SMT_P10F9 :
+#endif
+	case SMT_P20F1 :
+		if (!local) {
+			pcon->pc_err = SMT_RDF_NOPARAM ;
+			return ;
+		}
+		break ;
+	case SMT_P2034 :
+	case SMT_P2046 :
+	case SMT_P2047 :
+	case SMT_P204A :
+	case SMT_P2051 :
+	case SMT_P2052 :
+		mac_update_counter(smc) ;
+		break ;
+	case SMT_P4022:
+		mib_p->fddiPORTPC_LS = LS2MIB(
+			sm_pm_get_ls(smc,port_to_mib(smc,port))) ;
+		break ;
+	case SMT_P_REASON :
+		* (u_long *) to = 0 ;
+		sp_len = 4 ;
+		goto sp_done ;
+	case SMT_P1033 :			/* time stamp */
+		smt_set_timestamp(smc,smc->mib.fddiSMTTimeStamp) ;
+		break ;
+
+	case SMT_P1020:				/* port indexes */
+#if	NUMPHYS == 12
+		swap = "IIIIIIIIIIII" ;
+#else
+#if	NUMPHYS == 2
+		if (smc->s.sas == SMT_SAS)
+			swap = "I" ;
+		else
+			swap = "II" ;
+#else
+#if	NUMPHYS == 24
+		swap = "IIIIIIIIIIIIIIIIIIIIIIII" ;
+#else
+	????
+#endif
+#endif
+#endif
+		break ;
+	case SMT_P3212 :
+		{
+			sp_len = cem_build_path(smc,to,path) ;
+			goto sp_done ;
+		}
+	case SMT_P1048 :		/* peer wrap condition */
+		{
+			struct smt_p_1048	*sp ;
+			sp = (struct smt_p_1048 *) to ;
+			sp->p1048_flag = smc->mib.fddiSMTPeerWrapFlag ;
+			sp->p1048_cf_state = smc->mib.fddiSMTCF_State ;
+			sp_len = sizeof(struct smt_p_1048) ;
+			goto sp_done ;
+		}
+	case SMT_P208C :
+		{
+			struct smt_p_208c	*sp ;
+			sp = (struct smt_p_208c *) to ;
+			sp->p208c_flag =
+				smc->mib.m[MAC0].fddiMACDuplicateAddressCond ;
+			sp->p208c_dupcondition =
+				(mib_m->fddiMACDA_Flag ? SMT_ST_MY_DUPA : 0) |
+				(mib_m->fddiMACUNDA_Flag ? SMT_ST_UNA_DUPA : 0);
+			sp->p208c_fddilong =
+				mib_m->fddiMACSMTAddress ;
+			sp->p208c_fddiunalong =
+				mib_m->fddiMACUpstreamNbr ;
+			sp->p208c_pad = 0 ;
+			sp_len = sizeof(struct smt_p_208c) ;
+			goto sp_done ;
+		}
+	case SMT_P208D :		/* frame error condition */
+		{
+			struct smt_p_208d	*sp ;
+			sp = (struct smt_p_208d *) to ;
+			sp->p208d_flag =
+				mib_m->fddiMACFrameErrorFlag ;
+			sp->p208d_frame_ct =
+				mib_m->fddiMACFrame_Ct ;
+			sp->p208d_error_ct =
+				mib_m->fddiMACError_Ct ;
+			sp->p208d_lost_ct =
+				mib_m->fddiMACLost_Ct ;
+			sp->p208d_ratio =
+				mib_m->fddiMACFrameErrorRatio ;
+			sp_len = sizeof(struct smt_p_208d) ;
+			goto sp_done ;
+		}
+	case SMT_P208E :		/* not copied condition */
+		{
+			struct smt_p_208e	*sp ;
+			sp = (struct smt_p_208e *) to ;
+			sp->p208e_flag =
+				mib_m->fddiMACNotCopiedFlag ;
+			sp->p208e_not_copied =
+				mib_m->fddiMACNotCopied_Ct ;
+			sp->p208e_copied =
+				mib_m->fddiMACCopied_Ct ;
+			sp->p208e_not_copied_ratio =
+				mib_m->fddiMACNotCopiedRatio ;
+			sp_len = sizeof(struct smt_p_208e) ;
+			goto sp_done ;
+		}
+	case SMT_P208F :	/* neighbor change event */
+		{
+			struct smt_p_208f	*sp ;
+			sp = (struct smt_p_208f *) to ;
+			sp->p208f_multiple =
+				mib_m->fddiMACMultiple_N ;
+			sp->p208f_nacondition =
+				mib_m->fddiMACDuplicateAddressCond ;
+			sp->p208f_old_una =
+				mib_m->fddiMACOldUpstreamNbr ;
+			sp->p208f_new_una =
+				mib_m->fddiMACUpstreamNbr ;
+			sp->p208f_old_dna =
+				mib_m->fddiMACOldDownstreamNbr ;
+			sp->p208f_new_dna =
+				mib_m->fddiMACDownstreamNbr ;
+			sp->p208f_curren_path =
+				mib_m->fddiMACCurrentPath ;
+			sp->p208f_smt_address =
+				mib_m->fddiMACSMTAddress ;
+			sp_len = sizeof(struct smt_p_208f) ;
+			goto sp_done ;
+		}
+	case SMT_P2090 :
+		{
+			struct smt_p_2090	*sp ;
+			sp = (struct smt_p_2090 *) to ;
+			sp->p2090_multiple =
+				mib_m->fddiMACMultiple_P ;
+			sp->p2090_availablepaths =
+				mib_m->fddiMACAvailablePaths ;
+			sp->p2090_currentpath =
+				mib_m->fddiMACCurrentPath ;
+			sp->p2090_requestedpaths =
+				mib_m->fddiMACRequestedPaths ;
+			sp_len = sizeof(struct smt_p_2090) ;
+			goto sp_done ;
+		}
+	case SMT_P4050 :
+		{
+			struct smt_p_4050	*sp ;
+			sp = (struct smt_p_4050 *) to ;
+			sp->p4050_flag =
+				mib_p->fddiPORTLerFlag ;
+			sp->p4050_pad = 0 ;
+			sp->p4050_cutoff =
+				mib_p->fddiPORTLer_Cutoff ;
+			sp->p4050_alarm =
+				mib_p->fddiPORTLer_Alarm ;
+			sp->p4050_estimate =
+				mib_p->fddiPORTLer_Estimate ;
+			sp->p4050_reject_ct =
+				mib_p->fddiPORTLem_Reject_Ct ;
+			sp->p4050_ct =
+				mib_p->fddiPORTLem_Ct ;
+			sp_len = sizeof(struct smt_p_4050) ;
+			goto sp_done ;
+		}
+
+	case SMT_P4051 :
+		{
+			struct smt_p_4051	*sp ;
+			sp = (struct smt_p_4051 *) to ;
+			sp->p4051_multiple =
+				mib_p->fddiPORTMultiple_U ;
+			sp->p4051_porttype =
+				mib_p->fddiPORTMy_Type ;
+			sp->p4051_connectstate =
+				mib_p->fddiPORTConnectState ;
+			sp->p4051_pc_neighbor =
+				mib_p->fddiPORTNeighborType ;
+			sp->p4051_pc_withhold =
+				mib_p->fddiPORTPC_Withhold ;
+			sp_len = sizeof(struct smt_p_4051) ;
+			goto sp_done ;
+		}
+	case SMT_P4052 :
+		{
+			struct smt_p_4052	*sp ;
+			sp = (struct smt_p_4052 *) to ;
+			sp->p4052_flag =
+				mib_p->fddiPORTEB_Condition ;
+			sp->p4052_eberrorcount =
+				mib_p->fddiPORTEBError_Ct ;
+			sp_len = sizeof(struct smt_p_4052) ;
+			goto sp_done ;
+		}
+	case SMT_P4053 :
+		{
+			struct smt_p_4053	*sp ;
+			sp = (struct smt_p_4053 *) to ;
+			sp->p4053_multiple =
+				mib_p->fddiPORTMultiple_P ;
+			sp->p4053_availablepaths =
+				mib_p->fddiPORTAvailablePaths ;
+			sp->p4053_currentpath =
+				mib_p->fddiPORTCurrentPath ;
+			memcpy(	(char *) &sp->p4053_requestedpaths,
+				(char *) mib_p->fddiPORTRequestedPaths,4) ;
+			sp->p4053_mytype =
+				mib_p->fddiPORTMy_Type ;
+			sp->p4053_neighbortype =
+				mib_p->fddiPORTNeighborType ;
+			sp_len = sizeof(struct smt_p_4053) ;
+			goto sp_done ;
+		}
+	default :
+		break ;
+	}
+	/*
+	 * in table ?
+	 */
+	if (!pt) {
+		pcon->pc_err = (para & 0xff00) ? SMT_RDF_NOPARAM :
+						SMT_RDF_ILLEGAL ;
+		return ;
+	}
+	/*
+	 * check access rights
+	 */
+	switch (pt->p_access) {
+	case AC_G :
+	case AC_GR :
+		break ;
+	default :
+		pcon->pc_err = SMT_RDF_ILLEGAL ;
+		return ;
+	}
+	from = mib_addr + pt->p_offset ;
+	if (!swap)
+		swap = pt->p_swap ;		/* pointer to swap string */
+
+	/*
+	 * copy values
+	 */
+	while ((c = *swap++)) {
+		switch(c) {
+		case 'b' :
+		case 'w' :
+		case 'l' :
+			break ;
+		case 'S' :
+		case 'E' :
+		case 'R' :
+		case 'r' :
+			if (len < 4)
+				goto len_error ;
+			to[0] = 0 ;
+			to[1] = 0 ;
+#ifdef	LITTLE_ENDIAN
+			if (c == 'r') {
+				to[2] = *from++ ;
+				to[3] = *from++ ;
+			}
+			else {
+				to[3] = *from++ ;
+				to[2] = *from++ ;
+			}
+#else
+			to[2] = *from++ ;
+			to[3] = *from++ ;
+#endif
+			to += 4 ;
+			len -= 4 ;
+			break ;
+		case 'I' :		/* for SET of port indexes */
+			if (len < 2)
+				goto len_error ;
+#ifdef	LITTLE_ENDIAN
+			to[1] = *from++ ;
+			to[0] = *from++ ;
+#else
+			to[0] = *from++ ;
+			to[1] = *from++ ;
+#endif
+			to += 2 ;
+			len -= 2 ;
+			break ;
+		case 'F' :
+		case 'B' :
+			if (len < 4)
+				goto len_error ;
+			len -= 4 ;
+			to[0] = 0 ;
+			to[1] = 0 ;
+			to[2] = 0 ;
+			to[3] = *from++ ;
+			to += 4 ;
+			break ;
+		case 'C' :
+		case 'T' :
+		case 'L' :
+			if (len < 4)
+				goto len_error ;
+#ifdef	LITTLE_ENDIAN
+			to[3] = *from++ ;
+			to[2] = *from++ ;
+			to[1] = *from++ ;
+			to[0] = *from++ ;
+#else
+			to[0] = *from++ ;
+			to[1] = *from++ ;
+			to[2] = *from++ ;
+			to[3] = *from++ ;
+#endif
+			len -= 4 ;
+			to += 4 ;
+			break ;
+		case '2' :		/* PortMacIndicated */
+			if (len < 4)
+				goto len_error ;
+			to[0] = 0 ;
+			to[1] = 0 ;
+			to[2] = *from++ ;
+			to[3] = *from++ ;
+			len -= 4 ;
+			to += 4 ;
+			break ;
+		case '4' :
+			if (len < 4)
+				goto len_error ;
+			to[0] = *from++ ;
+			to[1] = *from++ ;
+			to[2] = *from++ ;
+			to[3] = *from++ ;
+			len -= 4 ;
+			to += 4 ;
+			break ;
+		case 'A' :
+			if (len < 8)
+				goto len_error ;
+			to[0] = 0 ;
+			to[1] = 0 ;
+			memcpy((char *) to+2,(char *) from,6) ;
+			to += 8 ;
+			from += 8 ;
+			len -= 8 ;
+			break ;
+		case '8' :
+			if (len < 8)
+				goto len_error ;
+			memcpy((char *) to,(char *) from,8) ;
+			to += 8 ;
+			from += 8 ;
+			len -= 8 ;
+			break ;
+		case 'D' :
+			if (len < 32)
+				goto len_error ;
+			memcpy((char *) to,(char *) from,32) ;
+			to += 32 ;
+			from += 32 ;
+			len -= 32 ;
+			break ;
+		case 'P' :		/* timestamp is NOT swapped */
+			if (len < 8)
+				goto len_error ;
+			to[0] = *from++ ;
+			to[1] = *from++ ;
+			to[2] = *from++ ;
+			to[3] = *from++ ;
+			to[4] = *from++ ;
+			to[5] = *from++ ;
+			to[6] = *from++ ;
+			to[7] = *from++ ;
+			to += 8 ;
+			len -= 8 ;
+			break ;
+		default :
+			SMT_PANIC(smc,SMT_E0119, SMT_E0119_MSG) ;
+			break ;
+		}
+	}
+
+done:
+	/*
+	 * make it even (in case of 'I' encoding)
+	 * note: len is DECREMENTED
+	 */
+	if (len & 3) {
+		to[0] = 0 ;
+		to[1] = 0 ;
+		to += 4 - (len & 3 ) ;
+		len = len & ~ 3 ;
+	}
+
+	/* set type and length */
+	pa->p_type = para ;
+	pa->p_len = plen - len - PARA_LEN ;
+	/* return values */
+	pcon->pc_p = (void *) to ;
+	pcon->pc_len = len ;
+	return ;
+
+sp_done:
+	len -= sp_len ;
+	to += sp_len ;
+	goto done ;
+
+len_error:
+	/* parameter does not fit in frame */
+	pcon->pc_err = SMT_RDF_TOOLONG ;
+	return ;
+
+wrong_error:
+	pcon->pc_err = SMT_RDF_LENGTH ;
+}
+
+/*
+ * set parameter
+ */
+static int smt_set_para(struct s_smc *smc, struct smt_para *pa, int index,
+			int local, int set)
+{
+#define IFSET(x)	if (set) (x)
+
+	const struct s_p_tab	*pt ;
+	int		len ;
+	char		*from ;
+	char		*to ;
+	const char	*swap ;
+	char		c ;
+	char		*mib_addr ;
+	struct fddi_mib	*mib ;
+	struct fddi_mib_m	*mib_m = NULL;
+	struct fddi_mib_a	*mib_a = NULL;
+	struct fddi_mib_p	*mib_p = NULL;
+	int		mac ;
+	int		path ;
+	int		port ;
+	SK_LOC_DECL(u_char,byte_val) ;
+	SK_LOC_DECL(u_short,word_val) ;
+	SK_LOC_DECL(u_long,long_val) ;
+
+	mac = index - INDEX_MAC ;
+	path = index - INDEX_PATH ;
+	port = index - INDEX_PORT ;
+	len = pa->p_len ;
+	from = (char *) (pa + 1 ) ;
+
+	mib = &smc->mib ;
+	switch (pa->p_type & 0xf000) {
+	case 0x1000 :
+	default :
+		mib_addr = (char *) mib ;
+		break ;
+	case 0x2000 :
+		if (mac < 0 || mac >= NUMMACS) {
+			return SMT_RDF_NOPARAM;
+		}
+		mib_m = &smc->mib.m[mac] ;
+		mib_addr = (char *) mib_m ;
+		from += 4 ;		/* skip index */
+		len -= 4 ;
+		break ;
+	case 0x3000 :
+		if (path < 0 || path >= NUMPATHS) {
+			return SMT_RDF_NOPARAM;
+		}
+		mib_a = &smc->mib.a[path] ;
+		mib_addr = (char *) mib_a ;
+		from += 4 ;		/* skip index */
+		len -= 4 ;
+		break ;
+	case 0x4000 :
+		if (port < 0 || port >= smt_mib_phys(smc)) {
+			return SMT_RDF_NOPARAM;
+		}
+		mib_p = &smc->mib.p[port_to_mib(smc,port)] ;
+		mib_addr = (char *) mib_p ;
+		from += 4 ;		/* skip index */
+		len -= 4 ;
+		break ;
+	}
+	switch (pa->p_type) {
+	case SMT_P10F0 :
+	case SMT_P10F1 :
+#ifdef	ESS
+	case SMT_P10F2 :
+	case SMT_P10F3 :
+	case SMT_P10F4 :
+	case SMT_P10F5 :
+	case SMT_P10F6 :
+	case SMT_P10F7 :
+#endif
+#ifdef	SBA
+	case SMT_P10F8 :
+	case SMT_P10F9 :
+#endif
+	case SMT_P20F1 :
+		if (!local)
+			return SMT_RDF_NOPARAM;
+		break ;
+	}
+	pt = smt_get_ptab(pa->p_type) ;
+	if (!pt)
+		return (pa->p_type & 0xff00) ? SMT_RDF_NOPARAM :
+					       SMT_RDF_ILLEGAL;
+	switch (pt->p_access) {
+	case AC_GR :
+	case AC_S :
+		break ;
+	default :
+		return SMT_RDF_ILLEGAL;
+	}
+	to = mib_addr + pt->p_offset ;
+	swap = pt->p_swap ;		/* pointer to swap string */
+
+	while (swap && (c = *swap++)) {
+		switch(c) {
+		case 'b' :
+			to = (char *) &byte_val ;
+			break ;
+		case 'w' :
+			to = (char *) &word_val ;
+			break ;
+		case 'l' :
+			to = (char *) &long_val ;
+			break ;
+		case 'S' :
+		case 'E' :
+		case 'R' :
+		case 'r' :
+			if (len < 4) {
+				goto len_error ;
+			}
+			if (from[0] | from[1])
+				goto val_error ;
+#ifdef	LITTLE_ENDIAN
+			if (c == 'r') {
+				to[0] = from[2] ;
+				to[1] = from[3] ;
+			}
+			else {
+				to[1] = from[2] ;
+				to[0] = from[3] ;
+			}
+#else
+			to[0] = from[2] ;
+			to[1] = from[3] ;
+#endif
+			from += 4 ;
+			to += 2 ;
+			len -= 4 ;
+			break ;
+		case 'F' :
+		case 'B' :
+			if (len < 4) {
+				goto len_error ;
+			}
+			if (from[0] | from[1] | from[2])
+				goto val_error ;
+			to[0] = from[3] ;
+			len -= 4 ;
+			from += 4 ;
+			to += 4 ;
+			break ;
+		case 'C' :
+		case 'T' :
+		case 'L' :
+			if (len < 4) {
+				goto len_error ;
+			}
+#ifdef	LITTLE_ENDIAN
+			to[3] = *from++ ;
+			to[2] = *from++ ;
+			to[1] = *from++ ;
+			to[0] = *from++ ;
+#else
+			to[0] = *from++ ;
+			to[1] = *from++ ;
+			to[2] = *from++ ;
+			to[3] = *from++ ;
+#endif
+			len -= 4 ;
+			to += 4 ;
+			break ;
+		case 'A' :
+			if (len < 8)
+				goto len_error ;
+			if (set)
+				memcpy((char *) to,(char *) from+2,6) ;
+			to += 8 ;
+			from += 8 ;
+			len -= 8 ;
+			break ;
+		case '4' :
+			if (len < 4)
+				goto len_error ;
+			if (set)
+				memcpy((char *) to,(char *) from,4) ;
+			to += 4 ;
+			from += 4 ;
+			len -= 4 ;
+			break ;
+		case '8' :
+			if (len < 8)
+				goto len_error ;
+			if (set)
+				memcpy((char *) to,(char *) from,8) ;
+			to += 8 ;
+			from += 8 ;
+			len -= 8 ;
+			break ;
+		case 'D' :
+			if (len < 32)
+				goto len_error ;
+			if (set)
+				memcpy((char *) to,(char *) from,32) ;
+			to += 32 ;
+			from += 32 ;
+			len -= 32 ;
+			break ;
+		case 'P' :		/* timestamp is NOT swapped */
+			if (set) {
+				to[0] = *from++ ;
+				to[1] = *from++ ;
+				to[2] = *from++ ;
+				to[3] = *from++ ;
+				to[4] = *from++ ;
+				to[5] = *from++ ;
+				to[6] = *from++ ;
+				to[7] = *from++ ;
+			}
+			to += 8 ;
+			len -= 8 ;
+			break ;
+		default :
+			SMT_PANIC(smc,SMT_E0120, SMT_E0120_MSG) ;
+			return SMT_RDF_ILLEGAL;
+		}
+	}
+	/*
+	 * actions and internal updates
+	 */
+	switch (pa->p_type) {
+	case SMT_P101A:			/* fddiSMTConfigPolicy */
+		if (word_val & ~1)
+			goto val_error ;
+		IFSET(mib->fddiSMTConfigPolicy = word_val) ;
+		break ;
+	case SMT_P101B :		/* fddiSMTConnectionPolicy */
+		if (!(word_val & POLICY_MM))
+			goto val_error ;
+		IFSET(mib->fddiSMTConnectionPolicy = word_val) ;
+		break ;
+	case SMT_P101D : 		/* fddiSMTTT_Notify */
+		if (word_val < 2 || word_val > 30)
+			goto val_error ;
+		IFSET(mib->fddiSMTTT_Notify = word_val) ;
+		break ;
+	case SMT_P101E :		/* fddiSMTStatRptPolicy */
+		if (byte_val & ~1)
+			goto val_error ;
+		IFSET(mib->fddiSMTStatRptPolicy = byte_val) ;
+		break ;
+	case SMT_P101F :		/* fddiSMTTrace_MaxExpiration */
+		/*
+		 * note: lower limit trace_max = 6.001773... s
+		 * NO upper limit
+		 */
+		if (long_val < (long)0x478bf51L)
+			goto val_error ;
+		IFSET(mib->fddiSMTTrace_MaxExpiration = long_val) ;
+		break ;
+#ifdef	ESS
+	case SMT_P10F2 :		/* fddiESSPayload */
+		if (long_val > 1562)
+			goto val_error ;
+		if (set && smc->mib.fddiESSPayload != long_val) {
+			smc->ess.raf_act_timer_poll = TRUE ;
+			smc->mib.fddiESSPayload = long_val ;
+		}
+		break ;
+	case SMT_P10F3 :		/* fddiESSOverhead */
+		if (long_val < 50 || long_val > 5000)
+			goto val_error ;
+		if (set && smc->mib.fddiESSPayload &&
+			smc->mib.fddiESSOverhead != long_val) {
+			smc->ess.raf_act_timer_poll = TRUE ;
+			smc->mib.fddiESSOverhead = long_val ;
+		}
+		break ;
+	case SMT_P10F4 :		/* fddiESSMaxTNeg */
+		if (long_val > -MS2BCLK(5) || long_val < -MS2BCLK(165))
+			goto val_error ;
+		IFSET(mib->fddiESSMaxTNeg = long_val) ;
+		break ;
+	case SMT_P10F5 :		/* fddiESSMinSegmentSize */
+		if (long_val < 1 || long_val > 4478)
+			goto val_error ;
+		IFSET(mib->fddiESSMinSegmentSize = long_val) ;
+		break ;
+	case SMT_P10F6 :		/* fddiESSCategory */
+		if ((long_val & 0xffff) != 1)
+			goto val_error ;
+		IFSET(mib->fddiESSCategory = long_val) ;
+		break ;
+	case SMT_P10F7 :		/* fddiESSSyncTxMode */
+		if (word_val > 1)
+			goto val_error ;
+		IFSET(mib->fddiESSSynchTxMode = word_val) ;
+		break ;
+#endif
+#ifdef	SBA
+	case SMT_P10F8 :		/* fddiSBACommand */
+		if (byte_val != SB_STOP && byte_val != SB_START)
+			goto val_error ;
+		IFSET(mib->fddiSBACommand = byte_val) ;
+		break ;
+	case SMT_P10F9 :		/* fddiSBAAvailable */
+		if (byte_val > 100)
+			goto val_error ;
+		IFSET(mib->fddiSBAAvailable = byte_val) ;
+		break ;
+#endif
+	case SMT_P2020 :		/* fddiMACRequestedPaths */
+		if ((word_val & (MIB_P_PATH_PRIM_PREFER |
+			MIB_P_PATH_PRIM_ALTER)) == 0 )
+			goto val_error ;
+		IFSET(mib_m->fddiMACRequestedPaths = word_val) ;
+		break ;
+	case SMT_P205F :		/* fddiMACFrameErrorThreshold */
+		/* 0 .. ffff acceptable */
+		IFSET(mib_m->fddiMACFrameErrorThreshold = word_val) ;
+		break ;
+	case SMT_P2067 :		/* fddiMACNotCopiedThreshold */
+		/* 0 .. ffff acceptable */
+		IFSET(mib_m->fddiMACNotCopiedThreshold = word_val) ;
+		break ;
+	case SMT_P2076:			/* fddiMACMA_UnitdataEnable */
+		if (byte_val & ~1)
+			goto val_error ;
+		if (set) {
+			mib_m->fddiMACMA_UnitdataEnable = byte_val ;
+			queue_event(smc,EVENT_RMT,RM_ENABLE_FLAG) ;
+		}
+		break ;
+	case SMT_P20F1 :		/* fddiMACT_Min */
+		IFSET(mib_m->fddiMACT_Min = long_val) ;
+		break ;
+	case SMT_P320F :
+		if (long_val > 1562)
+			goto val_error ;
+		IFSET(mib_a->fddiPATHSbaPayload = long_val) ;
+#ifdef	ESS
+		if (set)
+			ess_para_change(smc) ;
+#endif
+		break ;
+	case SMT_P3210 :
+		if (long_val > 5000)
+			goto val_error ;
+		
+		if (long_val != 0 && mib_a->fddiPATHSbaPayload == 0)
+			goto val_error ;
+
+		IFSET(mib_a->fddiPATHSbaOverhead = long_val) ;
+#ifdef	ESS
+		if (set)
+			ess_para_change(smc) ;
+#endif
+		break ;
+	case SMT_P3213:			/* fddiPATHT_Rmode */
+		/* no limit :
+		 * 0 .. 343.597 => 0 .. 2e32 * 80nS
+		 */
+		if (set) {
+			mib_a->fddiPATHT_Rmode = long_val ;
+			rtm_set_timer(smc) ;
+		}
+		break ;
+	case SMT_P3214 :		/* fddiPATHSbaAvailable */
+		if (long_val > 0x00BEBC20L)
+			goto val_error ;
+#ifdef SBA 
+		if (set && mib->fddiSBACommand == SB_STOP)
+			goto val_error ;
+#endif
+		IFSET(mib_a->fddiPATHSbaAvailable = long_val) ;
+		break ;
+	case SMT_P3215 :		/* fddiPATHTVXLowerBound */
+		IFSET(mib_a->fddiPATHTVXLowerBound = long_val) ;
+		goto change_mac_para ;
+	case SMT_P3216 :		/* fddiPATHT_MaxLowerBound */
+		IFSET(mib_a->fddiPATHT_MaxLowerBound = long_val) ;
+		goto change_mac_para ;
+	case SMT_P3217 :		/* fddiPATHMaxT_Req */
+		IFSET(mib_a->fddiPATHMaxT_Req = long_val) ;
+
+change_mac_para:
+		if (set && smt_set_mac_opvalues(smc)) {
+			RS_SET(smc,RS_EVENT) ;
+			smc->sm.please_reconnect = 1 ;
+			queue_event(smc,EVENT_ECM,EC_DISCONNECT) ;
+		}
+		break ;
+	case SMT_P400E :		/* fddiPORTConnectionPolicies */
+		if (byte_val > 1)
+			goto val_error ;
+		IFSET(mib_p->fddiPORTConnectionPolicies = byte_val) ;
+		break ;
+	case SMT_P4011 :		/* fddiPORTRequestedPaths */
+		/* all 3*8 bits allowed */
+		IFSET(memcpy((char *)mib_p->fddiPORTRequestedPaths,
+			(char *)&long_val,4)) ;
+		break ;
+	case SMT_P401F:			/* fddiPORTMaint_LS */
+		if (word_val > 4)
+			goto val_error ;
+		IFSET(mib_p->fddiPORTMaint_LS = word_val) ;
+		break ;
+	case SMT_P403A :		/* fddiPORTLer_Cutoff */
+		if (byte_val < 4 || byte_val > 15)
+			goto val_error ;
+		IFSET(mib_p->fddiPORTLer_Cutoff = byte_val) ;
+		break ;
+	case SMT_P403B :		/* fddiPORTLer_Alarm */
+		if (byte_val < 4 || byte_val > 15)
+			goto val_error ;
+		IFSET(mib_p->fddiPORTLer_Alarm = byte_val) ;
+		break ;
+
+	/*
+	 * Actions
+	 */
+	case SMT_P103C :		/* fddiSMTStationAction */
+		if (smt_action(smc,SMT_STATION_ACTION, (int) word_val, 0))
+			goto val_error ;
+		break ;
+	case SMT_P4046:			/* fddiPORTAction */
+		if (smt_action(smc,SMT_PORT_ACTION, (int) word_val,
+			port_to_mib(smc,port)))
+			goto val_error ;
+		break ;
+	default :
+		break ;
+	}
+	return 0;
+
+val_error:
+	/* parameter value in frame is out of range */
+	return SMT_RDF_RANGE;
+
+len_error:
+	/* parameter value in frame is too short */
+	return SMT_RDF_LENGTH;
+
+#if	0
+no_author_error:
+	/* parameter not setable, because the SBA is not active
+	 * Please note: we give the return code 'not authorizeed
+	 *  because SBA denied is not a valid return code in the
+	 * PMF protocol.
+	 */
+	return SMT_RDF_AUTHOR;
+#endif
+}
+
+static const struct s_p_tab *smt_get_ptab(u_short para)
+{
+	const struct s_p_tab	*pt ;
+	for (pt = p_tab ; pt->p_num && pt->p_num != para ; pt++)
+		;
+	return pt->p_num ? pt : NULL;
+}
+
+static int smt_mib_phys(struct s_smc *smc)
+{
+#ifdef	CONCENTRATOR
+	SK_UNUSED(smc) ;
+
+	return NUMPHYS;
+#else
+	if (smc->s.sas == SMT_SAS)
+		return 1;
+	return NUMPHYS;
+#endif
+}
+
+static int port_to_mib(struct s_smc *smc, int p)
+{
+#ifdef	CONCENTRATOR
+	SK_UNUSED(smc) ;
+
+	return p;
+#else
+	if (smc->s.sas == SMT_SAS)
+		return PS;
+	return p;
+#endif
+}
+
+
+#ifdef	DEBUG
+#ifndef	BOOT
+void dump_smt(struct s_smc *smc, struct smt_header *sm, char *text)
+{
+	int	len ;
+	struct smt_para	*pa ;
+	char	*c ;
+	int	n ;
+	int	nn ;
+#ifdef	LITTLE_ENDIAN
+	int	smtlen ;
+#endif
+
+	SK_UNUSED(smc) ;
+
+#ifdef	DEBUG_BRD
+	if (smc->debug.d_smtf < 2)
+#else
+	if (debug.d_smtf < 2)
+#endif
+		return ;
+#ifdef	LITTLE_ENDIAN
+	smtlen = sm->smt_len + sizeof(struct smt_header) ;
+#endif
+	printf("SMT Frame [%s]:\nDA  ",text) ;
+	dump_hex((char *) &sm->smt_dest,6) ;
+	printf("\tSA ") ;
+	dump_hex((char *) &sm->smt_source,6) ;
+	printf(" Class %x Type %x Version %x\n",
+		sm->smt_class,sm->smt_type,sm->smt_version)  ;
+	printf("TID %lx\t\tSID ",sm->smt_tid) ;
+	dump_hex((char *) &sm->smt_sid,8) ;
+	printf(" LEN %x\n",sm->smt_len) ;
+
+	len = sm->smt_len ;
+	pa = (struct smt_para *) (sm + 1) ;
+	while (len > 0 ) {
+		int	plen ;
+#ifdef UNIX
+		printf("TYPE %x LEN %x VALUE\t",pa->p_type,pa->p_len) ;
+#else
+		printf("TYPE %04x LEN %2x VALUE\t",pa->p_type,pa->p_len) ;
+#endif
+		n = pa->p_len ;
+		if ( (n < 0 ) || (n > (int)(len - PARA_LEN))) {
+			n = len - PARA_LEN ;
+			printf(" BAD LENGTH\n") ;
+			break ;
+		}
+#ifdef	LITTLE_ENDIAN
+		smt_swap_para(sm,smtlen,0) ;
+#endif
+		if (n < 24) {
+			dump_hex((char *)(pa+1),(int) n) ;
+			printf("\n") ;
+		}
+		else {
+			int	first = 0 ;
+			c = (char *)(pa+1) ;
+			dump_hex(c,16) ;
+			printf("\n") ;
+			n -= 16 ;
+			c += 16 ;
+			while (n > 0) {
+				nn = (n > 16) ? 16 : n ;
+				if (n > 64) {
+					if (first == 0)
+						printf("\t\t\t...\n") ;
+					first = 1 ;
+				}
+				else {
+					printf("\t\t\t") ;
+					dump_hex(c,nn) ;
+					printf("\n") ;
+				}
+				n -= nn ;
+				c += 16 ;
+			}
+		}
+#ifdef	LITTLE_ENDIAN
+		smt_swap_para(sm,smtlen,1) ;
+#endif
+		plen = (pa->p_len + PARA_LEN + 3) & ~3 ;
+		len -= plen ;
+		pa = (struct smt_para *)((char *)pa + plen) ;
+	}
+	printf("-------------------------------------------------\n\n") ;
+}
+
+void dump_hex(char *p, int len)
+{
+	int	n = 0 ;
+	while (len--) {
+		n++ ;
+#ifdef UNIX
+		printf("%x%s",*p++ & 0xff,len ? ( (n & 7) ? " " : "-") : "") ;
+#else
+		printf("%02x%s",*p++ & 0xff,len ? ( (n & 7) ? " " : "-") : "") ;
+#endif
+	}
+}
+#endif	/* no BOOT */
+#endif	/* DEBUG */
+
+
+#endif	/* no SLIM_SMT */
diff --git a/drivers/net/fddi/skfp/queue.c b/drivers/net/fddi/skfp/queue.c
new file mode 100644
index 0000000..c1a0df4
--- /dev/null
+++ b/drivers/net/fddi/skfp/queue.c
@@ -0,0 +1,173 @@
+/******************************************************************************
+ *
+ *	(C)Copyright 1998,1999 SysKonnect,
+ *	a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ *	See the file "skfddi.c" for further information.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+	SMT Event Queue Management
+*/
+
+#include "h/types.h"
+#include "h/fddi.h"
+#include "h/smc.h"
+
+#ifndef	lint
+static const char ID_sccs[] = "@(#)queue.c	2.9 97/08/04 (C) SK " ;
+#endif
+
+#define PRINTF(a,b,c)
+
+/*
+ * init event queue management
+ */
+void ev_init(struct s_smc *smc)
+{
+	smc->q.ev_put = smc->q.ev_get = smc->q.ev_queue ;
+}
+
+/*
+ * add event to queue
+ */
+void queue_event(struct s_smc *smc, int class, int event)
+{
+	PRINTF("queue class %d event %d\n",class,event) ;
+	smc->q.ev_put->class = class ;
+	smc->q.ev_put->event = event ;
+	if (++smc->q.ev_put == &smc->q.ev_queue[MAX_EVENT])
+		smc->q.ev_put = smc->q.ev_queue ;
+
+	if (smc->q.ev_put == smc->q.ev_get) {
+		SMT_ERR_LOG(smc,SMT_E0137, SMT_E0137_MSG) ;
+	}
+}
+
+/*
+ * timer_event is called from HW timer package.
+ */
+void timer_event(struct s_smc *smc, u_long token)
+{
+	PRINTF("timer event class %d token %d\n",
+		EV_T_CLASS(token),
+		EV_T_EVENT(token)) ;
+	queue_event(smc,EV_T_CLASS(token),EV_T_EVENT(token));
+}
+
+/*
+ * event dispatcher
+ *	while event queue is not empty
+ *		get event from queue
+ *		send command to state machine
+ *	end
+ */
+void ev_dispatcher(struct s_smc *smc)
+{
+	struct event_queue *ev ;	/* pointer into queue */
+	int		class ;
+
+	ev = smc->q.ev_get ;
+	PRINTF("dispatch get %x put %x\n",ev,smc->q.ev_put) ;
+	while (ev != smc->q.ev_put) {
+		PRINTF("dispatch class %d event %d\n",ev->class,ev->event) ;
+		switch(class = ev->class) {
+		case EVENT_ECM :		/* Entity Corordination  Man. */
+			ecm(smc,(int)ev->event) ;
+			break ;
+		case EVENT_CFM :		/* Configuration Man. */
+			cfm(smc,(int)ev->event) ;
+			break ;
+		case EVENT_RMT :		/* Ring Man. */
+			rmt(smc,(int)ev->event) ;
+			break ;
+		case EVENT_SMT :
+			smt_event(smc,(int)ev->event) ;
+			break ;
+#ifdef	CONCENTRATOR
+		case 99 :
+			timer_test_event(smc,(int)ev->event) ;
+			break ;
+#endif
+		case EVENT_PCMA :		/* PHY A */
+		case EVENT_PCMB :		/* PHY B */
+		default :
+			if (class >= EVENT_PCMA &&
+			    class < EVENT_PCMA + NUMPHYS) {
+				pcm(smc,class - EVENT_PCMA,(int)ev->event) ;
+				break ;
+			}
+			SMT_PANIC(smc,SMT_E0121, SMT_E0121_MSG) ;
+			return ;
+		}
+
+		if (++ev == &smc->q.ev_queue[MAX_EVENT])
+			ev = smc->q.ev_queue ;
+
+		/* Renew get: it is used in queue_events to detect overruns */
+		smc->q.ev_get = ev;
+	}
+}
+
+/*
+ * smt_online connects to or disconnects from the ring
+ * MUST be called to initiate connection establishment
+ *
+ *	on	0	disconnect
+ *	on	1	connect
+ */
+u_short smt_online(struct s_smc *smc, int on)
+{
+	queue_event(smc,EVENT_ECM,on ? EC_CONNECT : EC_DISCONNECT) ;
+	ev_dispatcher(smc) ;
+	return smc->mib.fddiSMTCF_State;
+}
+
+/*
+ * set SMT flag to value
+ *	flag		flag name
+ *	value		flag value
+ * dump current flag setting
+ */
+#ifdef	CONCENTRATOR
+void do_smt_flag(struct s_smc *smc, char *flag, int value)
+{
+#ifdef	DEBUG
+	struct smt_debug	*deb;
+
+	SK_UNUSED(smc) ;
+
+#ifdef	DEBUG_BRD
+	deb = &smc->debug;
+#else
+	deb = &debug;
+#endif
+	if (!strcmp(flag,"smt"))
+		deb->d_smt = value ;
+	else if (!strcmp(flag,"smtf"))
+		deb->d_smtf = value ;
+	else if (!strcmp(flag,"pcm"))
+		deb->d_pcm = value ;
+	else if (!strcmp(flag,"rmt"))
+		deb->d_rmt = value ;
+	else if (!strcmp(flag,"cfm"))
+		deb->d_cfm = value ;
+	else if (!strcmp(flag,"ecm"))
+		deb->d_ecm = value ;
+	printf("smt	%d\n",deb->d_smt) ;
+	printf("smtf	%d\n",deb->d_smtf) ;
+	printf("pcm	%d\n",deb->d_pcm) ;
+	printf("rmt	%d\n",deb->d_rmt) ;
+	printf("cfm	%d\n",deb->d_cfm) ;
+	printf("ecm	%d\n",deb->d_ecm) ;
+#endif	/* DEBUG */
+}
+#endif
diff --git a/drivers/net/fddi/skfp/rmt.c b/drivers/net/fddi/skfp/rmt.c
new file mode 100644
index 0000000..ef8d567
--- /dev/null
+++ b/drivers/net/fddi/skfp/rmt.c
@@ -0,0 +1,654 @@
+/******************************************************************************
+ *
+ *	(C)Copyright 1998,1999 SysKonnect,
+ *	a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ *	See the file "skfddi.c" for further information.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+	SMT RMT
+	Ring Management
+*/
+
+/*
+ * Hardware independent state machine implemantation
+ * The following external SMT functions are referenced :
+ *
+ * 		queue_event()
+ * 		smt_timer_start()
+ * 		smt_timer_stop()
+ *
+ * 	The following external HW dependent functions are referenced :
+ *		sm_ma_control()
+ *		sm_mac_check_beacon_claim()
+ *
+ * 	The following HW dependent events are required :
+ *		RM_RING_OP
+ *		RM_RING_NON_OP
+ *		RM_MY_BEACON
+ *		RM_OTHER_BEACON
+ *		RM_MY_CLAIM
+ *		RM_TRT_EXP
+ *		RM_VALID_CLAIM
+ *
+ */
+
+#include "h/types.h"
+#include "h/fddi.h"
+#include "h/smc.h"
+
+#define KERNEL
+#include "h/smtstate.h"
+
+#ifndef	lint
+static const char ID_sccs[] = "@(#)rmt.c	2.13 99/07/02 (C) SK " ;
+#endif
+
+/*
+ * FSM Macros
+ */
+#define AFLAG	0x10
+#define GO_STATE(x)	(smc->mib.m[MAC0].fddiMACRMTState = (x)|AFLAG)
+#define ACTIONS_DONE()	(smc->mib.m[MAC0].fddiMACRMTState &= ~AFLAG)
+#define ACTIONS(x)	(x|AFLAG)
+
+#define RM0_ISOLATED	0
+#define RM1_NON_OP	1		/* not operational */
+#define RM2_RING_OP	2		/* ring operational */
+#define RM3_DETECT	3		/* detect dupl addresses */
+#define RM4_NON_OP_DUP	4		/* dupl. addr detected */
+#define RM5_RING_OP_DUP	5		/* ring oper. with dupl. addr */
+#define RM6_DIRECTED	6		/* sending directed beacons */
+#define RM7_TRACE	7		/* trace initiated */
+
+#ifdef	DEBUG
+/*
+ * symbolic state names
+ */
+static const char * const rmt_states[] = {
+	"RM0_ISOLATED","RM1_NON_OP","RM2_RING_OP","RM3_DETECT",
+	"RM4_NON_OP_DUP","RM5_RING_OP_DUP","RM6_DIRECTED",
+	"RM7_TRACE"
+} ;
+
+/*
+ * symbolic event names
+ */
+static const char * const rmt_events[] = {
+	"NONE","RM_RING_OP","RM_RING_NON_OP","RM_MY_BEACON",
+	"RM_OTHER_BEACON","RM_MY_CLAIM","RM_TRT_EXP","RM_VALID_CLAIM",
+	"RM_JOIN","RM_LOOP","RM_DUP_ADDR","RM_ENABLE_FLAG",
+	"RM_TIMEOUT_NON_OP","RM_TIMEOUT_T_STUCK",
+	"RM_TIMEOUT_ANNOUNCE","RM_TIMEOUT_T_DIRECT",
+	"RM_TIMEOUT_D_MAX","RM_TIMEOUT_POLL","RM_TX_STATE_CHANGE"
+} ;
+#endif
+
+/*
+ * Globals
+ * in struct s_rmt
+ */
+
+
+/*
+ * function declarations
+ */
+static void rmt_fsm(struct s_smc *smc, int cmd);
+static void start_rmt_timer0(struct s_smc *smc, u_long value, int event);
+static void start_rmt_timer1(struct s_smc *smc, u_long value, int event);
+static void start_rmt_timer2(struct s_smc *smc, u_long value, int event);
+static void stop_rmt_timer0(struct s_smc *smc);
+static void stop_rmt_timer1(struct s_smc *smc);
+static void stop_rmt_timer2(struct s_smc *smc);
+static void rmt_dup_actions(struct s_smc *smc);
+static void rmt_reinsert_actions(struct s_smc *smc);
+static void rmt_leave_actions(struct s_smc *smc);
+static void rmt_new_dup_actions(struct s_smc *smc);
+
+#ifndef SUPERNET_3
+extern void restart_trt_for_dbcn() ;
+#endif /*SUPERNET_3*/
+
+/*
+	init RMT state machine
+	clear all RMT vars and flags
+*/
+void rmt_init(struct s_smc *smc)
+{
+	smc->mib.m[MAC0].fddiMACRMTState = ACTIONS(RM0_ISOLATED) ;
+	smc->r.dup_addr_test = DA_NONE ;
+	smc->r.da_flag = 0 ;
+	smc->mib.m[MAC0].fddiMACMA_UnitdataAvailable = FALSE ;
+	smc->r.sm_ma_avail = FALSE ;
+	smc->r.loop_avail = 0 ;
+	smc->r.bn_flag = 0 ;
+	smc->r.jm_flag = 0 ;
+	smc->r.no_flag = TRUE ;
+}
+
+/*
+	RMT state machine
+	called by dispatcher
+
+	do
+		display state change
+		process event
+	until SM is stable
+*/
+void rmt(struct s_smc *smc, int event)
+{
+	int	state ;
+
+	do {
+		DB_RMT("RMT : state %s%s",
+			(smc->mib.m[MAC0].fddiMACRMTState & AFLAG) ? "ACTIONS " : "",
+			rmt_states[smc->mib.m[MAC0].fddiMACRMTState & ~AFLAG]) ;
+		DB_RMT(" event %s\n",rmt_events[event],0) ;
+		state = smc->mib.m[MAC0].fddiMACRMTState ;
+		rmt_fsm(smc,event) ;
+		event = 0 ;
+	} while (state != smc->mib.m[MAC0].fddiMACRMTState) ;
+	rmt_state_change(smc,(int)smc->mib.m[MAC0].fddiMACRMTState) ;
+}
+
+/*
+	process RMT event
+*/
+static void rmt_fsm(struct s_smc *smc, int cmd)
+{
+	/*
+	 * RM00-RM70 : from all states
+	 */
+	if (!smc->r.rm_join && !smc->r.rm_loop &&
+		smc->mib.m[MAC0].fddiMACRMTState != ACTIONS(RM0_ISOLATED) &&
+		smc->mib.m[MAC0].fddiMACRMTState != RM0_ISOLATED) {
+		RS_SET(smc,RS_NORINGOP) ;
+		rmt_indication(smc,0) ;
+		GO_STATE(RM0_ISOLATED) ;
+		return ;
+	}
+
+	switch(smc->mib.m[MAC0].fddiMACRMTState) {
+	case ACTIONS(RM0_ISOLATED) :
+		stop_rmt_timer0(smc) ;
+		stop_rmt_timer1(smc) ;
+		stop_rmt_timer2(smc) ;
+
+		/*
+		 * Disable MAC.
+		 */
+		sm_ma_control(smc,MA_OFFLINE) ;
+		smc->mib.m[MAC0].fddiMACMA_UnitdataAvailable = FALSE ;
+		smc->r.loop_avail = FALSE ;
+		smc->r.sm_ma_avail = FALSE ;
+		smc->r.no_flag = TRUE ;
+		DB_RMTN(1,"RMT : ISOLATED\n",0,0) ;
+		ACTIONS_DONE() ;
+		break ;
+	case RM0_ISOLATED :
+		/*RM01*/
+		if (smc->r.rm_join || smc->r.rm_loop) {
+			/*
+			 * According to the standard the MAC must be reset
+			 * here. The FORMAC will be initialized and Claim
+			 * and Beacon Frames will be uploaded to the MAC.
+			 * So any change of Treq will take effect NOW.
+			 */
+			sm_ma_control(smc,MA_RESET) ;
+			GO_STATE(RM1_NON_OP) ;
+			break ;
+		}
+		break ;
+	case ACTIONS(RM1_NON_OP) :
+		start_rmt_timer0(smc,smc->s.rmt_t_non_op,RM_TIMEOUT_NON_OP) ;
+		stop_rmt_timer1(smc) ;
+		stop_rmt_timer2(smc) ;
+		sm_ma_control(smc,MA_BEACON) ;
+		DB_RMTN(1,"RMT : RING DOWN\n",0,0) ;
+		RS_SET(smc,RS_NORINGOP) ;
+		smc->r.sm_ma_avail = FALSE ;
+		rmt_indication(smc,0) ;
+		ACTIONS_DONE() ;
+		break ;
+	case RM1_NON_OP :
+		/*RM12*/
+		if (cmd == RM_RING_OP) {
+			RS_SET(smc,RS_RINGOPCHANGE) ;
+			GO_STATE(RM2_RING_OP) ;
+			break ;
+		}
+		/*RM13*/
+		else if (cmd == RM_TIMEOUT_NON_OP) {
+			smc->r.bn_flag = FALSE ;
+			smc->r.no_flag = TRUE ;
+			GO_STATE(RM3_DETECT) ;
+			break ;
+		}
+		break ;
+	case ACTIONS(RM2_RING_OP) :
+		stop_rmt_timer0(smc) ;
+		stop_rmt_timer1(smc) ;
+		stop_rmt_timer2(smc) ;
+		smc->r.no_flag = FALSE ;
+		if (smc->r.rm_loop)
+			smc->r.loop_avail = TRUE ;
+		if (smc->r.rm_join) {
+			smc->r.sm_ma_avail = TRUE ;
+			if (smc->mib.m[MAC0].fddiMACMA_UnitdataEnable)
+			smc->mib.m[MAC0].fddiMACMA_UnitdataAvailable = TRUE ;
+				else
+			smc->mib.m[MAC0].fddiMACMA_UnitdataAvailable = FALSE ;
+		}
+		DB_RMTN(1,"RMT : RING UP\n",0,0) ;
+		RS_CLEAR(smc,RS_NORINGOP) ;
+		RS_SET(smc,RS_RINGOPCHANGE) ;
+		rmt_indication(smc,1) ;
+		smt_stat_counter(smc,0) ;
+		ACTIONS_DONE() ;
+		break ;
+	case RM2_RING_OP :
+		/*RM21*/
+		if (cmd == RM_RING_NON_OP) {
+			smc->mib.m[MAC0].fddiMACMA_UnitdataAvailable = FALSE ;
+			smc->r.loop_avail = FALSE ;
+			RS_SET(smc,RS_RINGOPCHANGE) ;
+			GO_STATE(RM1_NON_OP) ;
+			break ;
+		}
+		/*RM22a*/
+		else if (cmd == RM_ENABLE_FLAG) {
+			if (smc->mib.m[MAC0].fddiMACMA_UnitdataEnable)
+			smc->mib.m[MAC0].fddiMACMA_UnitdataAvailable = TRUE ;
+				else
+			smc->mib.m[MAC0].fddiMACMA_UnitdataAvailable = FALSE ;
+		}
+		/*RM25*/
+		else if (smc->r.dup_addr_test == DA_FAILED) {
+			smc->mib.m[MAC0].fddiMACMA_UnitdataAvailable = FALSE ;
+			smc->r.loop_avail = FALSE ;
+			smc->r.da_flag = TRUE ;
+			GO_STATE(RM5_RING_OP_DUP) ;
+			break ;
+		}
+		break ;
+	case ACTIONS(RM3_DETECT) :
+		start_rmt_timer0(smc,smc->s.mac_d_max*2,RM_TIMEOUT_D_MAX) ;
+		start_rmt_timer1(smc,smc->s.rmt_t_stuck,RM_TIMEOUT_T_STUCK) ;
+		start_rmt_timer2(smc,smc->s.rmt_t_poll,RM_TIMEOUT_POLL) ;
+		sm_mac_check_beacon_claim(smc) ;
+		DB_RMTN(1,"RMT : RM3_DETECT\n",0,0) ;
+		ACTIONS_DONE() ;
+		break ;
+	case RM3_DETECT :
+		if (cmd == RM_TIMEOUT_POLL) {
+			start_rmt_timer2(smc,smc->s.rmt_t_poll,RM_TIMEOUT_POLL);
+			sm_mac_check_beacon_claim(smc) ;
+			break ;
+		}
+		if (cmd == RM_TIMEOUT_D_MAX) {
+			smc->r.timer0_exp = TRUE ;
+		}
+		/*
+		 *jd(22-Feb-1999)
+		 * We need a time ">= 2*mac_d_max" since we had finished
+		 * Claim or Beacon state. So we will restart timer0 at
+		 * every state change.
+		 */
+		if (cmd == RM_TX_STATE_CHANGE) {
+			start_rmt_timer0(smc,
+					 smc->s.mac_d_max*2,
+					 RM_TIMEOUT_D_MAX) ;
+		}
+		/*RM32*/
+		if (cmd == RM_RING_OP) {
+			GO_STATE(RM2_RING_OP) ;
+			break ;
+		}
+		/*RM33a*/
+		else if ((cmd == RM_MY_BEACON || cmd == RM_OTHER_BEACON)
+			&& smc->r.bn_flag) {
+			smc->r.bn_flag = FALSE ;
+		}
+		/*RM33b*/
+		else if (cmd == RM_TRT_EXP && !smc->r.bn_flag) {
+			int	tx ;
+			/*
+			 * set bn_flag only if in state T4 or T5:
+			 * only if we're the beaconer should we start the
+			 * trace !
+			 */
+			if ((tx =  sm_mac_get_tx_state(smc)) == 4 || tx == 5) {
+			DB_RMTN(2,"RMT : DETECT && TRT_EXPIRED && T4/T5\n",0,0);
+				smc->r.bn_flag = TRUE ;
+				/*
+				 * If one of the upstream stations beaconed
+				 * and the link to the upstream neighbor is
+				 * lost we need to restart the stuck timer to
+				 * check the "stuck beacon" condition.
+				 */
+				start_rmt_timer1(smc,smc->s.rmt_t_stuck,
+					RM_TIMEOUT_T_STUCK) ;
+			}
+			/*
+			 * We do NOT need to clear smc->r.bn_flag in case of
+			 * not being in state T4 or T5, because the flag
+			 * must be cleared in order to get in this condition.
+			 */
+
+			DB_RMTN(2,
+			"RMT : sm_mac_get_tx_state() = %d (bn_flag = %d)\n",
+			tx,smc->r.bn_flag) ;
+		}
+		/*RM34a*/
+		else if (cmd == RM_MY_CLAIM && smc->r.timer0_exp) {
+			rmt_new_dup_actions(smc) ;
+			GO_STATE(RM4_NON_OP_DUP) ;
+			break ;
+		}
+		/*RM34b*/
+		else if (cmd == RM_MY_BEACON && smc->r.timer0_exp) {
+			rmt_new_dup_actions(smc) ;
+			GO_STATE(RM4_NON_OP_DUP) ;
+			break ;
+		}
+		/*RM34c*/
+		else if (cmd == RM_VALID_CLAIM) {
+			rmt_new_dup_actions(smc) ;
+			GO_STATE(RM4_NON_OP_DUP) ;
+			break ;
+		}
+		/*RM36*/
+		else if (cmd == RM_TIMEOUT_T_STUCK &&
+			smc->r.rm_join && smc->r.bn_flag) {
+			GO_STATE(RM6_DIRECTED) ;
+			break ;
+		}
+		break ;
+	case ACTIONS(RM4_NON_OP_DUP) :
+		start_rmt_timer0(smc,smc->s.rmt_t_announce,RM_TIMEOUT_ANNOUNCE);
+		start_rmt_timer1(smc,smc->s.rmt_t_stuck,RM_TIMEOUT_T_STUCK) ;
+		start_rmt_timer2(smc,smc->s.rmt_t_poll,RM_TIMEOUT_POLL) ;
+		sm_mac_check_beacon_claim(smc) ;
+		DB_RMTN(1,"RMT : RM4_NON_OP_DUP\n",0,0) ;
+		ACTIONS_DONE() ;
+		break ;
+	case RM4_NON_OP_DUP :
+		if (cmd == RM_TIMEOUT_POLL) {
+			start_rmt_timer2(smc,smc->s.rmt_t_poll,RM_TIMEOUT_POLL);
+			sm_mac_check_beacon_claim(smc) ;
+			break ;
+		}
+		/*RM41*/
+		if (!smc->r.da_flag) {
+			GO_STATE(RM1_NON_OP) ;
+			break ;
+		}
+		/*RM44a*/
+		else if ((cmd == RM_MY_BEACON || cmd == RM_OTHER_BEACON) &&
+			smc->r.bn_flag) {
+			smc->r.bn_flag = FALSE ;
+		}
+		/*RM44b*/
+		else if (cmd == RM_TRT_EXP && !smc->r.bn_flag) {
+			int	tx ;
+			/*
+			 * set bn_flag only if in state T4 or T5:
+			 * only if we're the beaconer should we start the
+			 * trace !
+			 */
+			if ((tx =  sm_mac_get_tx_state(smc)) == 4 || tx == 5) {
+			DB_RMTN(2,"RMT : NOPDUP && TRT_EXPIRED && T4/T5\n",0,0);
+				smc->r.bn_flag = TRUE ;
+				/*
+				 * If one of the upstream stations beaconed
+				 * and the link to the upstream neighbor is
+				 * lost we need to restart the stuck timer to
+				 * check the "stuck beacon" condition.
+				 */
+				start_rmt_timer1(smc,smc->s.rmt_t_stuck,
+					RM_TIMEOUT_T_STUCK) ;
+			}
+			/*
+			 * We do NOT need to clear smc->r.bn_flag in case of
+			 * not being in state T4 or T5, because the flag
+			 * must be cleared in order to get in this condition.
+			 */
+
+			DB_RMTN(2,
+			"RMT : sm_mac_get_tx_state() = %d (bn_flag = %d)\n",
+			tx,smc->r.bn_flag) ;
+		}
+		/*RM44c*/
+		else if (cmd == RM_TIMEOUT_ANNOUNCE && !smc->r.bn_flag) {
+			rmt_dup_actions(smc) ;
+		}
+		/*RM45*/
+		else if (cmd == RM_RING_OP) {
+			smc->r.no_flag = FALSE ;
+			GO_STATE(RM5_RING_OP_DUP) ;
+			break ;
+		}
+		/*RM46*/
+		else if (cmd == RM_TIMEOUT_T_STUCK &&
+			smc->r.rm_join && smc->r.bn_flag) {
+			GO_STATE(RM6_DIRECTED) ;
+			break ;
+		}
+		break ;
+	case ACTIONS(RM5_RING_OP_DUP) :
+		stop_rmt_timer0(smc) ;
+		stop_rmt_timer1(smc) ;
+		stop_rmt_timer2(smc) ;
+		DB_RMTN(1,"RMT : RM5_RING_OP_DUP\n",0,0) ;
+		ACTIONS_DONE() ;
+		break;
+	case RM5_RING_OP_DUP :
+		/*RM52*/
+		if (smc->r.dup_addr_test == DA_PASSED) {
+			smc->r.da_flag = FALSE ;
+			GO_STATE(RM2_RING_OP) ;
+			break ;
+		}
+		/*RM54*/
+		else if (cmd == RM_RING_NON_OP) {
+			smc->r.jm_flag = FALSE ;
+			smc->r.bn_flag = FALSE ;
+			GO_STATE(RM4_NON_OP_DUP) ;
+			break ;
+		}
+		break ;
+	case ACTIONS(RM6_DIRECTED) :
+		start_rmt_timer0(smc,smc->s.rmt_t_direct,RM_TIMEOUT_T_DIRECT) ;
+		stop_rmt_timer1(smc) ;
+		start_rmt_timer2(smc,smc->s.rmt_t_poll,RM_TIMEOUT_POLL) ;
+		sm_ma_control(smc,MA_DIRECTED) ;
+		RS_SET(smc,RS_BEACON) ;
+		DB_RMTN(1,"RMT : RM6_DIRECTED\n",0,0) ;
+		ACTIONS_DONE() ;
+		break ;
+	case RM6_DIRECTED :
+		/*RM63*/
+		if (cmd == RM_TIMEOUT_POLL) {
+			start_rmt_timer2(smc,smc->s.rmt_t_poll,RM_TIMEOUT_POLL);
+			sm_mac_check_beacon_claim(smc) ;
+#ifndef SUPERNET_3
+			/* Because of problems with the Supernet II chip set
+			 * sending of Directed Beacon will stop after 165ms
+			 * therefore restart_trt_for_dbcn(smc) will be called
+			 * to prevent this.
+			 */
+			restart_trt_for_dbcn(smc) ;
+#endif /*SUPERNET_3*/
+			break ;
+		}
+		if ((cmd == RM_MY_BEACON || cmd == RM_OTHER_BEACON) &&
+			!smc->r.da_flag) {
+			smc->r.bn_flag = FALSE ;
+			GO_STATE(RM3_DETECT) ;
+			break ;
+		}
+		/*RM64*/
+		else if ((cmd == RM_MY_BEACON || cmd == RM_OTHER_BEACON) &&
+			smc->r.da_flag) {
+			smc->r.bn_flag = FALSE ;
+			GO_STATE(RM4_NON_OP_DUP) ;
+			break ;
+		}
+		/*RM67*/
+		else if (cmd == RM_TIMEOUT_T_DIRECT) {
+			GO_STATE(RM7_TRACE) ;
+			break ;
+		}
+		break ;
+	case ACTIONS(RM7_TRACE) :
+		stop_rmt_timer0(smc) ;
+		stop_rmt_timer1(smc) ;
+		stop_rmt_timer2(smc) ;
+		smc->e.trace_prop |= ENTITY_BIT(ENTITY_MAC) ;
+		queue_event(smc,EVENT_ECM,EC_TRACE_PROP) ;
+		DB_RMTN(1,"RMT : RM7_TRACE\n",0,0) ;
+		ACTIONS_DONE() ;
+		break ;
+	case RM7_TRACE :
+		break ;
+	default:
+		SMT_PANIC(smc,SMT_E0122, SMT_E0122_MSG) ;
+		break;
+	}
+}
+
+/*
+ * (jd) RMT duplicate address actions
+ * leave the ring or reinsert just as configured
+ */
+static void rmt_dup_actions(struct s_smc *smc)
+{
+	if (smc->r.jm_flag) {
+	}
+	else {
+		if (smc->s.rmt_dup_mac_behavior) {
+			SMT_ERR_LOG(smc,SMT_E0138, SMT_E0138_MSG) ;
+                        rmt_reinsert_actions(smc) ;
+		}
+		else {
+			SMT_ERR_LOG(smc,SMT_E0135, SMT_E0135_MSG) ;
+			rmt_leave_actions(smc) ;
+		}
+	}
+}
+
+/*
+ * Reconnect to the Ring
+ */
+static void rmt_reinsert_actions(struct s_smc *smc)
+{
+	queue_event(smc,EVENT_ECM,EC_DISCONNECT) ;
+	queue_event(smc,EVENT_ECM,EC_CONNECT) ;
+}
+
+/*
+ * duplicate address detected
+ */
+static void rmt_new_dup_actions(struct s_smc *smc)
+{
+	smc->r.da_flag = TRUE ;
+	smc->r.bn_flag = FALSE ;
+	smc->r.jm_flag = FALSE ;
+	/*
+	 * we have three options : change address, jam or leave
+	 * we leave the ring as default 
+	 * Optionally it's possible to reinsert after leaving the Ring
+	 * but this will not conform with SMT Spec.
+	 */
+	if (smc->s.rmt_dup_mac_behavior) {
+		SMT_ERR_LOG(smc,SMT_E0138, SMT_E0138_MSG) ;
+		rmt_reinsert_actions(smc) ;
+	}
+	else {
+		SMT_ERR_LOG(smc,SMT_E0135, SMT_E0135_MSG) ;
+		rmt_leave_actions(smc) ;
+	}
+}
+
+
+/*
+ * leave the ring
+ */
+static void rmt_leave_actions(struct s_smc *smc)
+{
+	queue_event(smc,EVENT_ECM,EC_DISCONNECT) ;
+	/*
+	 * Note: Do NOT try again later. (with please reconnect)
+	 * The station must be left from the ring!
+	 */
+}
+
+/*
+ * SMT timer interface
+ *	start RMT timer 0
+ */
+static void start_rmt_timer0(struct s_smc *smc, u_long value, int event)
+{
+	smc->r.timer0_exp = FALSE ;		/* clear timer event flag */
+	smt_timer_start(smc,&smc->r.rmt_timer0,value,EV_TOKEN(EVENT_RMT,event));
+}
+
+/*
+ * SMT timer interface
+ *	start RMT timer 1
+ */
+static void start_rmt_timer1(struct s_smc *smc, u_long value, int event)
+{
+	smc->r.timer1_exp = FALSE ;	/* clear timer event flag */
+	smt_timer_start(smc,&smc->r.rmt_timer1,value,EV_TOKEN(EVENT_RMT,event));
+}
+
+/*
+ * SMT timer interface
+ *	start RMT timer 2
+ */
+static void start_rmt_timer2(struct s_smc *smc, u_long value, int event)
+{
+	smc->r.timer2_exp = FALSE ;		/* clear timer event flag */
+	smt_timer_start(smc,&smc->r.rmt_timer2,value,EV_TOKEN(EVENT_RMT,event));
+}
+
+/*
+ * SMT timer interface
+ *	stop RMT timer 0
+ */
+static void stop_rmt_timer0(struct s_smc *smc)
+{
+	if (smc->r.rmt_timer0.tm_active)
+		smt_timer_stop(smc,&smc->r.rmt_timer0) ;
+}
+
+/*
+ * SMT timer interface
+ *	stop RMT timer 1
+ */
+static void stop_rmt_timer1(struct s_smc *smc)
+{
+	if (smc->r.rmt_timer1.tm_active)
+		smt_timer_stop(smc,&smc->r.rmt_timer1) ;
+}
+
+/*
+ * SMT timer interface
+ *	stop RMT timer 2
+ */
+static void stop_rmt_timer2(struct s_smc *smc)
+{
+	if (smc->r.rmt_timer2.tm_active)
+		smt_timer_stop(smc,&smc->r.rmt_timer2) ;
+}
+
diff --git a/drivers/net/fddi/skfp/skfddi.c b/drivers/net/fddi/skfp/skfddi.c
new file mode 100644
index 0000000..3d9a459
--- /dev/null
+++ b/drivers/net/fddi/skfp/skfddi.c
@@ -0,0 +1,2260 @@
+/*
+ * File Name:
+ *   skfddi.c
+ *
+ * Copyright Information:
+ *   Copyright SysKonnect 1998,1999.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ * Abstract:
+ *   A Linux device driver supporting the SysKonnect FDDI PCI controller
+ *   familie.
+ *
+ * Maintainers:
+ *   CG    Christoph Goos (cgoos@syskonnect.de)
+ *
+ * Contributors:
+ *   DM    David S. Miller
+ *
+ * Address all question to:
+ *   linux@syskonnect.de
+ *
+ * The technical manual for the adapters is available from SysKonnect's
+ * web pages: www.syskonnect.com
+ * Goto "Support" and search Knowledge Base for "manual".
+ *
+ * Driver Architecture:
+ *   The driver architecture is based on the DEC FDDI driver by
+ *   Lawrence V. Stefani and several ethernet drivers.
+ *   I also used an existing Windows NT miniport driver.
+ *   All hardware dependent functions are handled by the SysKonnect
+ *   Hardware Module.
+ *   The only headerfiles that are directly related to this source
+ *   are skfddi.c, h/types.h, h/osdef1st.h, h/targetos.h.
+ *   The others belong to the SysKonnect FDDI Hardware Module and
+ *   should better not be changed.
+ *
+ * Modification History:
+ *              Date            Name    Description
+ *              02-Mar-98       CG	Created.
+ *
+ *		10-Mar-99	CG	Support for 2.2.x added.
+ *		25-Mar-99	CG	Corrected IRQ routing for SMP (APIC)
+ *		26-Oct-99	CG	Fixed compilation error on 2.2.13
+ *		12-Nov-99	CG	Source code release
+ *		22-Nov-99	CG	Included in kernel source.
+ *		07-May-00	DM	64 bit fixes, new dma interface
+ *		31-Jul-03	DB	Audit copy_*_user in skfp_ioctl
+ *					  Daniele Bellucci <bellucda@tiscali.it>
+ *		03-Dec-03	SH	Convert to PCI device model
+ *
+ * Compilation options (-Dxxx):
+ *              DRIVERDEBUG     print lots of messages to log file
+ *              DUMPPACKETS     print received/transmitted packets to logfile
+ * 
+ * Tested cpu architectures:
+ *	- i386
+ *	- sparc64
+ */
+
+/* Version information string - should be updated prior to */
+/* each new release!!! */
+#define VERSION		"2.07"
+
+static const char * const boot_msg = 
+	"SysKonnect FDDI PCI Adapter driver v" VERSION " for\n"
+	"  SK-55xx/SK-58xx adapters (SK-NET FDDI-FP/UP/LP)";
+
+/* Include files */
+
+#include <linux/capability.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/fddidevice.h>
+#include <linux/skbuff.h>
+#include <linux/bitops.h>
+#include <linux/gfp.h>
+
+#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+
+#include	"h/types.h"
+#undef ADDR			// undo Linux definition
+#include	"h/skfbi.h"
+#include	"h/fddi.h"
+#include	"h/smc.h"
+#include	"h/smtstate.h"
+
+
+// Define module-wide (static) routines
+static int skfp_driver_init(struct net_device *dev);
+static int skfp_open(struct net_device *dev);
+static int skfp_close(struct net_device *dev);
+static irqreturn_t skfp_interrupt(int irq, void *dev_id);
+static struct net_device_stats *skfp_ctl_get_stats(struct net_device *dev);
+static void skfp_ctl_set_multicast_list(struct net_device *dev);
+static void skfp_ctl_set_multicast_list_wo_lock(struct net_device *dev);
+static int skfp_ctl_set_mac_address(struct net_device *dev, void *addr);
+static int skfp_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+static netdev_tx_t skfp_send_pkt(struct sk_buff *skb,
+				       struct net_device *dev);
+static void send_queued_packets(struct s_smc *smc);
+static void CheckSourceAddress(unsigned char *frame, unsigned char *hw_addr);
+static void ResetAdapter(struct s_smc *smc);
+
+
+// Functions needed by the hardware module
+void *mac_drv_get_space(struct s_smc *smc, u_int size);
+void *mac_drv_get_desc_mem(struct s_smc *smc, u_int size);
+unsigned long mac_drv_virt2phys(struct s_smc *smc, void *virt);
+unsigned long dma_master(struct s_smc *smc, void *virt, int len, int flag);
+void dma_complete(struct s_smc *smc, volatile union s_fp_descr *descr,
+		  int flag);
+void mac_drv_tx_complete(struct s_smc *smc, volatile struct s_smt_fp_txd *txd);
+void llc_restart_tx(struct s_smc *smc);
+void mac_drv_rx_complete(struct s_smc *smc, volatile struct s_smt_fp_rxd *rxd,
+			 int frag_count, int len);
+void mac_drv_requeue_rxd(struct s_smc *smc, volatile struct s_smt_fp_rxd *rxd,
+			 int frag_count);
+void mac_drv_fill_rxd(struct s_smc *smc);
+void mac_drv_clear_rxd(struct s_smc *smc, volatile struct s_smt_fp_rxd *rxd,
+		       int frag_count);
+int mac_drv_rx_init(struct s_smc *smc, int len, int fc, char *look_ahead,
+		    int la_len);
+void dump_data(unsigned char *Data, int length);
+
+// External functions from the hardware module
+extern u_int mac_drv_check_space(void);
+extern int mac_drv_init(struct s_smc *smc);
+extern void hwm_tx_frag(struct s_smc *smc, char far * virt, u_long phys,
+			int len, int frame_status);
+extern int hwm_tx_init(struct s_smc *smc, u_char fc, int frag_count,
+		       int frame_len, int frame_status);
+extern void fddi_isr(struct s_smc *smc);
+extern void hwm_rx_frag(struct s_smc *smc, char far * virt, u_long phys,
+			int len, int frame_status);
+extern void mac_drv_rx_mode(struct s_smc *smc, int mode);
+extern void mac_drv_clear_rx_queue(struct s_smc *smc);
+extern void enable_tx_irq(struct s_smc *smc, u_short queue);
+
+static DEFINE_PCI_DEVICE_TABLE(skfddi_pci_tbl) = {
+	{ PCI_VENDOR_ID_SK, PCI_DEVICE_ID_SK_FP, PCI_ANY_ID, PCI_ANY_ID, },
+	{ }			/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(pci, skfddi_pci_tbl);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mirko Lindner <mlindner@syskonnect.de>");
+
+// Define module-wide (static) variables
+
+static int num_boards;	/* total number of adapters configured */
+
+static const struct net_device_ops skfp_netdev_ops = {
+	.ndo_open		= skfp_open,
+	.ndo_stop		= skfp_close,
+	.ndo_start_xmit		= skfp_send_pkt,
+	.ndo_get_stats		= skfp_ctl_get_stats,
+	.ndo_change_mtu		= fddi_change_mtu,
+	.ndo_set_rx_mode	= skfp_ctl_set_multicast_list,
+	.ndo_set_mac_address	= skfp_ctl_set_mac_address,
+	.ndo_do_ioctl		= skfp_ioctl,
+};
+
+/*
+ * =================
+ * = skfp_init_one =
+ * =================
+ *   
+ * Overview:
+ *   Probes for supported FDDI PCI controllers
+ *  
+ * Returns:
+ *   Condition code
+ *       
+ * Arguments:
+ *   pdev - pointer to PCI device information
+ *
+ * Functional Description:
+ *   This is now called by PCI driver registration process
+ *   for each board found.
+ *   
+ * Return Codes:
+ *   0           - This device (fddi0, fddi1, etc) configured successfully
+ *   -ENODEV - No devices present, or no SysKonnect FDDI PCI device
+ *                         present for this device name
+ *
+ *
+ * Side Effects:
+ *   Device structures for FDDI adapters (fddi0, fddi1, etc) are
+ *   initialized and the board resources are read and stored in
+ *   the device structure.
+ */
+static int skfp_init_one(struct pci_dev *pdev,
+				const struct pci_device_id *ent)
+{
+	struct net_device *dev;
+	struct s_smc *smc;	/* board pointer */
+	void __iomem *mem;
+	int err;
+
+	pr_debug("entering skfp_init_one\n");
+
+	if (num_boards == 0) 
+		printk("%s\n", boot_msg);
+
+	err = pci_enable_device(pdev);
+	if (err)
+		return err;
+
+	err = pci_request_regions(pdev, "skfddi");
+	if (err)
+		goto err_out1;
+
+	pci_set_master(pdev);
+
+#ifdef MEM_MAPPED_IO
+	if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
+		printk(KERN_ERR "skfp: region is not an MMIO resource\n");
+		err = -EIO;
+		goto err_out2;
+	}
+
+	mem = ioremap(pci_resource_start(pdev, 0), 0x4000);
+#else
+	if (!(pci_resource_flags(pdev, 1) & IO_RESOURCE_IO)) {
+		printk(KERN_ERR "skfp: region is not PIO resource\n");
+		err = -EIO;
+		goto err_out2;
+	}
+
+	mem = ioport_map(pci_resource_start(pdev, 1), FP_IO_LEN);
+#endif
+	if (!mem) {
+		printk(KERN_ERR "skfp:  Unable to map register, "
+				"FDDI adapter will be disabled.\n");
+		err = -EIO;
+		goto err_out2;
+	}
+
+	dev = alloc_fddidev(sizeof(struct s_smc));
+	if (!dev) {
+		printk(KERN_ERR "skfp: Unable to allocate fddi device, "
+				"FDDI adapter will be disabled.\n");
+		err = -ENOMEM;
+		goto err_out3;
+	}
+
+	dev->irq = pdev->irq;
+	dev->netdev_ops = &skfp_netdev_ops;
+
+	SET_NETDEV_DEV(dev, &pdev->dev);
+
+	/* Initialize board structure with bus-specific info */
+	smc = netdev_priv(dev);
+	smc->os.dev = dev;
+	smc->os.bus_type = SK_BUS_TYPE_PCI;
+	smc->os.pdev = *pdev;
+	smc->os.QueueSkb = MAX_TX_QUEUE_LEN;
+	smc->os.MaxFrameSize = MAX_FRAME_SIZE;
+	smc->os.dev = dev;
+	smc->hw.slot = -1;
+	smc->hw.iop = mem;
+	smc->os.ResetRequested = FALSE;
+	skb_queue_head_init(&smc->os.SendSkbQueue);
+
+	dev->base_addr = (unsigned long)mem;
+
+	err = skfp_driver_init(dev);
+	if (err)
+		goto err_out4;
+
+	err = register_netdev(dev);
+	if (err)
+		goto err_out5;
+
+	++num_boards;
+	pci_set_drvdata(pdev, dev);
+
+	if ((pdev->subsystem_device & 0xff00) == 0x5500 ||
+	    (pdev->subsystem_device & 0xff00) == 0x5800) 
+		printk("%s: SysKonnect FDDI PCI adapter"
+		       " found (SK-%04X)\n", dev->name,	
+		       pdev->subsystem_device);
+	else
+		printk("%s: FDDI PCI adapter found\n", dev->name);
+
+	return 0;
+err_out5:
+	if (smc->os.SharedMemAddr) 
+		pci_free_consistent(pdev, smc->os.SharedMemSize,
+				    smc->os.SharedMemAddr, 
+				    smc->os.SharedMemDMA);
+	pci_free_consistent(pdev, MAX_FRAME_SIZE,
+			    smc->os.LocalRxBuffer, smc->os.LocalRxBufferDMA);
+err_out4:
+	free_netdev(dev);
+err_out3:
+#ifdef MEM_MAPPED_IO
+	iounmap(mem);
+#else
+	ioport_unmap(mem);
+#endif
+err_out2:
+	pci_release_regions(pdev);
+err_out1:
+	pci_disable_device(pdev);
+	return err;
+}
+
+/*
+ * Called for each adapter board from pci_unregister_driver
+ */
+static void __devexit skfp_remove_one(struct pci_dev *pdev)
+{
+	struct net_device *p = pci_get_drvdata(pdev);
+	struct s_smc *lp = netdev_priv(p);
+
+	unregister_netdev(p);
+
+	if (lp->os.SharedMemAddr) {
+		pci_free_consistent(&lp->os.pdev,
+				    lp->os.SharedMemSize,
+				    lp->os.SharedMemAddr,
+				    lp->os.SharedMemDMA);
+		lp->os.SharedMemAddr = NULL;
+	}
+	if (lp->os.LocalRxBuffer) {
+		pci_free_consistent(&lp->os.pdev,
+				    MAX_FRAME_SIZE,
+				    lp->os.LocalRxBuffer,
+				    lp->os.LocalRxBufferDMA);
+		lp->os.LocalRxBuffer = NULL;
+	}
+#ifdef MEM_MAPPED_IO
+	iounmap(lp->hw.iop);
+#else
+	ioport_unmap(lp->hw.iop);
+#endif
+	pci_release_regions(pdev);
+	free_netdev(p);
+
+	pci_disable_device(pdev);
+	pci_set_drvdata(pdev, NULL);
+}
+
+/*
+ * ====================
+ * = skfp_driver_init =
+ * ====================
+ *   
+ * Overview:
+ *   Initializes remaining adapter board structure information
+ *   and makes sure adapter is in a safe state prior to skfp_open().
+ *  
+ * Returns:
+ *   Condition code
+ *       
+ * Arguments:
+ *   dev - pointer to device information
+ *
+ * Functional Description:
+ *   This function allocates additional resources such as the host memory
+ *   blocks needed by the adapter.
+ *   The adapter is also reset. The OS must call skfp_open() to open 
+ *   the adapter and bring it on-line.
+ *
+ * Return Codes:
+ *    0 - initialization succeeded
+ *   -1 - initialization failed
+ */
+static  int skfp_driver_init(struct net_device *dev)
+{
+	struct s_smc *smc = netdev_priv(dev);
+	skfddi_priv *bp = &smc->os;
+	int err = -EIO;
+
+	pr_debug("entering skfp_driver_init\n");
+
+	// set the io address in private structures
+	bp->base_addr = dev->base_addr;
+
+	// Get the interrupt level from the PCI Configuration Table
+	smc->hw.irq = dev->irq;
+
+	spin_lock_init(&bp->DriverLock);
+	
+	// Allocate invalid frame
+	bp->LocalRxBuffer = pci_alloc_consistent(&bp->pdev, MAX_FRAME_SIZE, &bp->LocalRxBufferDMA);
+	if (!bp->LocalRxBuffer) {
+		printk("could not allocate mem for ");
+		printk("LocalRxBuffer: %d byte\n", MAX_FRAME_SIZE);
+		goto fail;
+	}
+
+	// Determine the required size of the 'shared' memory area.
+	bp->SharedMemSize = mac_drv_check_space();
+	pr_debug("Memory for HWM: %ld\n", bp->SharedMemSize);
+	if (bp->SharedMemSize > 0) {
+		bp->SharedMemSize += 16;	// for descriptor alignment
+
+		bp->SharedMemAddr = pci_alloc_consistent(&bp->pdev,
+							 bp->SharedMemSize,
+							 &bp->SharedMemDMA);
+		if (!bp->SharedMemAddr) {
+			printk("could not allocate mem for ");
+			printk("hardware module: %ld byte\n",
+			       bp->SharedMemSize);
+			goto fail;
+		}
+		bp->SharedMemHeap = 0;	// Nothing used yet.
+
+	} else {
+		bp->SharedMemAddr = NULL;
+		bp->SharedMemHeap = 0;
+	}			// SharedMemSize > 0
+
+	memset(bp->SharedMemAddr, 0, bp->SharedMemSize);
+
+	card_stop(smc);		// Reset adapter.
+
+	pr_debug("mac_drv_init()..\n");
+	if (mac_drv_init(smc) != 0) {
+		pr_debug("mac_drv_init() failed\n");
+		goto fail;
+	}
+	read_address(smc, NULL);
+	pr_debug("HW-Addr: %pMF\n", smc->hw.fddi_canon_addr.a);
+	memcpy(dev->dev_addr, smc->hw.fddi_canon_addr.a, 6);
+
+	smt_reset_defaults(smc, 0);
+
+	return 0;
+
+fail:
+	if (bp->SharedMemAddr) {
+		pci_free_consistent(&bp->pdev,
+				    bp->SharedMemSize,
+				    bp->SharedMemAddr,
+				    bp->SharedMemDMA);
+		bp->SharedMemAddr = NULL;
+	}
+	if (bp->LocalRxBuffer) {
+		pci_free_consistent(&bp->pdev, MAX_FRAME_SIZE,
+				    bp->LocalRxBuffer, bp->LocalRxBufferDMA);
+		bp->LocalRxBuffer = NULL;
+	}
+	return err;
+}				// skfp_driver_init
+
+
+/*
+ * =============
+ * = skfp_open =
+ * =============
+ *   
+ * Overview:
+ *   Opens the adapter
+ *  
+ * Returns:
+ *   Condition code
+ *       
+ * Arguments:
+ *   dev - pointer to device information
+ *
+ * Functional Description:
+ *   This function brings the adapter to an operational state.
+ *
+ * Return Codes:
+ *   0           - Adapter was successfully opened
+ *   -EAGAIN - Could not register IRQ
+ */
+static int skfp_open(struct net_device *dev)
+{
+	struct s_smc *smc = netdev_priv(dev);
+	int err;
+
+	pr_debug("entering skfp_open\n");
+	/* Register IRQ - support shared interrupts by passing device ptr */
+	err = request_irq(dev->irq, skfp_interrupt, IRQF_SHARED,
+			  dev->name, dev);
+	if (err)
+		return err;
+
+	/*
+	 * Set current address to factory MAC address
+	 *
+	 * Note: We've already done this step in skfp_driver_init.
+	 *       However, it's possible that a user has set a node
+	 *               address override, then closed and reopened the
+	 *               adapter.  Unless we reset the device address field
+	 *               now, we'll continue to use the existing modified
+	 *               address.
+	 */
+	read_address(smc, NULL);
+	memcpy(dev->dev_addr, smc->hw.fddi_canon_addr.a, 6);
+
+	init_smt(smc, NULL);
+	smt_online(smc, 1);
+	STI_FBI();
+
+	/* Clear local multicast address tables */
+	mac_clear_multicast(smc);
+
+	/* Disable promiscuous filter settings */
+	mac_drv_rx_mode(smc, RX_DISABLE_PROMISC);
+
+	netif_start_queue(dev);
+	return 0;
+}				// skfp_open
+
+
+/*
+ * ==============
+ * = skfp_close =
+ * ==============
+ *   
+ * Overview:
+ *   Closes the device/module.
+ *  
+ * Returns:
+ *   Condition code
+ *       
+ * Arguments:
+ *   dev - pointer to device information
+ *
+ * Functional Description:
+ *   This routine closes the adapter and brings it to a safe state.
+ *   The interrupt service routine is deregistered with the OS.
+ *   The adapter can be opened again with another call to skfp_open().
+ *
+ * Return Codes:
+ *   Always return 0.
+ *
+ * Assumptions:
+ *   No further requests for this adapter are made after this routine is
+ *   called.  skfp_open() can be called to reset and reinitialize the
+ *   adapter.
+ */
+static int skfp_close(struct net_device *dev)
+{
+	struct s_smc *smc = netdev_priv(dev);
+	skfddi_priv *bp = &smc->os;
+
+	CLI_FBI();
+	smt_reset_defaults(smc, 1);
+	card_stop(smc);
+	mac_drv_clear_tx_queue(smc);
+	mac_drv_clear_rx_queue(smc);
+
+	netif_stop_queue(dev);
+	/* Deregister (free) IRQ */
+	free_irq(dev->irq, dev);
+
+	skb_queue_purge(&bp->SendSkbQueue);
+	bp->QueueSkb = MAX_TX_QUEUE_LEN;
+
+	return 0;
+}				// skfp_close
+
+
+/*
+ * ==================
+ * = skfp_interrupt =
+ * ==================
+ *   
+ * Overview:
+ *   Interrupt processing routine
+ *  
+ * Returns:
+ *   None
+ *       
+ * Arguments:
+ *   irq        - interrupt vector
+ *   dev_id     - pointer to device information
+ *
+ * Functional Description:
+ *   This routine calls the interrupt processing routine for this adapter.  It
+ *   disables and reenables adapter interrupts, as appropriate.  We can support
+ *   shared interrupts since the incoming dev_id pointer provides our device
+ *   structure context. All the real work is done in the hardware module.
+ *
+ * Return Codes:
+ *   None
+ *
+ * Assumptions:
+ *   The interrupt acknowledgement at the hardware level (eg. ACKing the PIC
+ *   on Intel-based systems) is done by the operating system outside this
+ *   routine.
+ *
+ *       System interrupts are enabled through this call.
+ *
+ * Side Effects:
+ *   Interrupts are disabled, then reenabled at the adapter.
+ */
+
+static irqreturn_t skfp_interrupt(int irq, void *dev_id)
+{
+	struct net_device *dev = dev_id;
+	struct s_smc *smc;	/* private board structure pointer */
+	skfddi_priv *bp;
+
+	smc = netdev_priv(dev);
+	bp = &smc->os;
+
+	// IRQs enabled or disabled ?
+	if (inpd(ADDR(B0_IMSK)) == 0) {
+		// IRQs are disabled: must be shared interrupt
+		return IRQ_NONE;
+	}
+	// Note: At this point, IRQs are enabled.
+	if ((inpd(ISR_A) & smc->hw.is_imask) == 0) {	// IRQ?
+		// Adapter did not issue an IRQ: must be shared interrupt
+		return IRQ_NONE;
+	}
+	CLI_FBI();		// Disable IRQs from our adapter.
+	spin_lock(&bp->DriverLock);
+
+	// Call interrupt handler in hardware module (HWM).
+	fddi_isr(smc);
+
+	if (smc->os.ResetRequested) {
+		ResetAdapter(smc);
+		smc->os.ResetRequested = FALSE;
+	}
+	spin_unlock(&bp->DriverLock);
+	STI_FBI();		// Enable IRQs from our adapter.
+
+	return IRQ_HANDLED;
+}				// skfp_interrupt
+
+
+/*
+ * ======================
+ * = skfp_ctl_get_stats =
+ * ======================
+ *   
+ * Overview:
+ *   Get statistics for FDDI adapter
+ *  
+ * Returns:
+ *   Pointer to FDDI statistics structure
+ *       
+ * Arguments:
+ *   dev - pointer to device information
+ *
+ * Functional Description:
+ *   Gets current MIB objects from adapter, then
+ *   returns FDDI statistics structure as defined
+ *   in if_fddi.h.
+ *
+ *   Note: Since the FDDI statistics structure is
+ *   still new and the device structure doesn't
+ *   have an FDDI-specific get statistics handler,
+ *   we'll return the FDDI statistics structure as
+ *   a pointer to an Ethernet statistics structure.
+ *   That way, at least the first part of the statistics
+ *   structure can be decoded properly.
+ *   We'll have to pay attention to this routine as the
+ *   device structure becomes more mature and LAN media
+ *   independent.
+ *
+ */
+static struct net_device_stats *skfp_ctl_get_stats(struct net_device *dev)
+{
+	struct s_smc *bp = netdev_priv(dev);
+
+	/* Fill the bp->stats structure with driver-maintained counters */
+
+	bp->os.MacStat.port_bs_flag[0] = 0x1234;
+	bp->os.MacStat.port_bs_flag[1] = 0x5678;
+// goos: need to fill out fddi statistic
+#if 0
+	/* Get FDDI SMT MIB objects */
+
+/* Fill the bp->stats structure with the SMT MIB object values */
+
+	memcpy(bp->stats.smt_station_id, &bp->cmd_rsp_virt->smt_mib_get.smt_station_id, sizeof(bp->cmd_rsp_virt->smt_mib_get.smt_station_id));
+	bp->stats.smt_op_version_id = bp->cmd_rsp_virt->smt_mib_get.smt_op_version_id;
+	bp->stats.smt_hi_version_id = bp->cmd_rsp_virt->smt_mib_get.smt_hi_version_id;
+	bp->stats.smt_lo_version_id = bp->cmd_rsp_virt->smt_mib_get.smt_lo_version_id;
+	memcpy(bp->stats.smt_user_data, &bp->cmd_rsp_virt->smt_mib_get.smt_user_data, sizeof(bp->cmd_rsp_virt->smt_mib_get.smt_user_data));
+	bp->stats.smt_mib_version_id = bp->cmd_rsp_virt->smt_mib_get.smt_mib_version_id;
+	bp->stats.smt_mac_cts = bp->cmd_rsp_virt->smt_mib_get.smt_mac_ct;
+	bp->stats.smt_non_master_cts = bp->cmd_rsp_virt->smt_mib_get.smt_non_master_ct;
+	bp->stats.smt_master_cts = bp->cmd_rsp_virt->smt_mib_get.smt_master_ct;
+	bp->stats.smt_available_paths = bp->cmd_rsp_virt->smt_mib_get.smt_available_paths;
+	bp->stats.smt_config_capabilities = bp->cmd_rsp_virt->smt_mib_get.smt_config_capabilities;
+	bp->stats.smt_config_policy = bp->cmd_rsp_virt->smt_mib_get.smt_config_policy;
+	bp->stats.smt_connection_policy = bp->cmd_rsp_virt->smt_mib_get.smt_connection_policy;
+	bp->stats.smt_t_notify = bp->cmd_rsp_virt->smt_mib_get.smt_t_notify;
+	bp->stats.smt_stat_rpt_policy = bp->cmd_rsp_virt->smt_mib_get.smt_stat_rpt_policy;
+	bp->stats.smt_trace_max_expiration = bp->cmd_rsp_virt->smt_mib_get.smt_trace_max_expiration;
+	bp->stats.smt_bypass_present = bp->cmd_rsp_virt->smt_mib_get.smt_bypass_present;
+	bp->stats.smt_ecm_state = bp->cmd_rsp_virt->smt_mib_get.smt_ecm_state;
+	bp->stats.smt_cf_state = bp->cmd_rsp_virt->smt_mib_get.smt_cf_state;
+	bp->stats.smt_remote_disconnect_flag = bp->cmd_rsp_virt->smt_mib_get.smt_remote_disconnect_flag;
+	bp->stats.smt_station_status = bp->cmd_rsp_virt->smt_mib_get.smt_station_status;
+	bp->stats.smt_peer_wrap_flag = bp->cmd_rsp_virt->smt_mib_get.smt_peer_wrap_flag;
+	bp->stats.smt_time_stamp = bp->cmd_rsp_virt->smt_mib_get.smt_msg_time_stamp.ls;
+	bp->stats.smt_transition_time_stamp = bp->cmd_rsp_virt->smt_mib_get.smt_transition_time_stamp.ls;
+	bp->stats.mac_frame_status_functions = bp->cmd_rsp_virt->smt_mib_get.mac_frame_status_functions;
+	bp->stats.mac_t_max_capability = bp->cmd_rsp_virt->smt_mib_get.mac_t_max_capability;
+	bp->stats.mac_tvx_capability = bp->cmd_rsp_virt->smt_mib_get.mac_tvx_capability;
+	bp->stats.mac_available_paths = bp->cmd_rsp_virt->smt_mib_get.mac_available_paths;
+	bp->stats.mac_current_path = bp->cmd_rsp_virt->smt_mib_get.mac_current_path;
+	memcpy(bp->stats.mac_upstream_nbr, &bp->cmd_rsp_virt->smt_mib_get.mac_upstream_nbr, FDDI_K_ALEN);
+	memcpy(bp->stats.mac_downstream_nbr, &bp->cmd_rsp_virt->smt_mib_get.mac_downstream_nbr, FDDI_K_ALEN);
+	memcpy(bp->stats.mac_old_upstream_nbr, &bp->cmd_rsp_virt->smt_mib_get.mac_old_upstream_nbr, FDDI_K_ALEN);
+	memcpy(bp->stats.mac_old_downstream_nbr, &bp->cmd_rsp_virt->smt_mib_get.mac_old_downstream_nbr, FDDI_K_ALEN);
+	bp->stats.mac_dup_address_test = bp->cmd_rsp_virt->smt_mib_get.mac_dup_address_test;
+	bp->stats.mac_requested_paths = bp->cmd_rsp_virt->smt_mib_get.mac_requested_paths;
+	bp->stats.mac_downstream_port_type = bp->cmd_rsp_virt->smt_mib_get.mac_downstream_port_type;
+	memcpy(bp->stats.mac_smt_address, &bp->cmd_rsp_virt->smt_mib_get.mac_smt_address, FDDI_K_ALEN);
+	bp->stats.mac_t_req = bp->cmd_rsp_virt->smt_mib_get.mac_t_req;
+	bp->stats.mac_t_neg = bp->cmd_rsp_virt->smt_mib_get.mac_t_neg;
+	bp->stats.mac_t_max = bp->cmd_rsp_virt->smt_mib_get.mac_t_max;
+	bp->stats.mac_tvx_value = bp->cmd_rsp_virt->smt_mib_get.mac_tvx_value;
+	bp->stats.mac_frame_error_threshold = bp->cmd_rsp_virt->smt_mib_get.mac_frame_error_threshold;
+	bp->stats.mac_frame_error_ratio = bp->cmd_rsp_virt->smt_mib_get.mac_frame_error_ratio;
+	bp->stats.mac_rmt_state = bp->cmd_rsp_virt->smt_mib_get.mac_rmt_state;
+	bp->stats.mac_da_flag = bp->cmd_rsp_virt->smt_mib_get.mac_da_flag;
+	bp->stats.mac_una_da_flag = bp->cmd_rsp_virt->smt_mib_get.mac_unda_flag;
+	bp->stats.mac_frame_error_flag = bp->cmd_rsp_virt->smt_mib_get.mac_frame_error_flag;
+	bp->stats.mac_ma_unitdata_available = bp->cmd_rsp_virt->smt_mib_get.mac_ma_unitdata_available;
+	bp->stats.mac_hardware_present = bp->cmd_rsp_virt->smt_mib_get.mac_hardware_present;
+	bp->stats.mac_ma_unitdata_enable = bp->cmd_rsp_virt->smt_mib_get.mac_ma_unitdata_enable;
+	bp->stats.path_tvx_lower_bound = bp->cmd_rsp_virt->smt_mib_get.path_tvx_lower_bound;
+	bp->stats.path_t_max_lower_bound = bp->cmd_rsp_virt->smt_mib_get.path_t_max_lower_bound;
+	bp->stats.path_max_t_req = bp->cmd_rsp_virt->smt_mib_get.path_max_t_req;
+	memcpy(bp->stats.path_configuration, &bp->cmd_rsp_virt->smt_mib_get.path_configuration, sizeof(bp->cmd_rsp_virt->smt_mib_get.path_configuration));
+	bp->stats.port_my_type[0] = bp->cmd_rsp_virt->smt_mib_get.port_my_type[0];
+	bp->stats.port_my_type[1] = bp->cmd_rsp_virt->smt_mib_get.port_my_type[1];
+	bp->stats.port_neighbor_type[0] = bp->cmd_rsp_virt->smt_mib_get.port_neighbor_type[0];
+	bp->stats.port_neighbor_type[1] = bp->cmd_rsp_virt->smt_mib_get.port_neighbor_type[1];
+	bp->stats.port_connection_policies[0] = bp->cmd_rsp_virt->smt_mib_get.port_connection_policies[0];
+	bp->stats.port_connection_policies[1] = bp->cmd_rsp_virt->smt_mib_get.port_connection_policies[1];
+	bp->stats.port_mac_indicated[0] = bp->cmd_rsp_virt->smt_mib_get.port_mac_indicated[0];
+	bp->stats.port_mac_indicated[1] = bp->cmd_rsp_virt->smt_mib_get.port_mac_indicated[1];
+	bp->stats.port_current_path[0] = bp->cmd_rsp_virt->smt_mib_get.port_current_path[0];
+	bp->stats.port_current_path[1] = bp->cmd_rsp_virt->smt_mib_get.port_current_path[1];
+	memcpy(&bp->stats.port_requested_paths[0 * 3], &bp->cmd_rsp_virt->smt_mib_get.port_requested_paths[0], 3);
+	memcpy(&bp->stats.port_requested_paths[1 * 3], &bp->cmd_rsp_virt->smt_mib_get.port_requested_paths[1], 3);
+	bp->stats.port_mac_placement[0] = bp->cmd_rsp_virt->smt_mib_get.port_mac_placement[0];
+	bp->stats.port_mac_placement[1] = bp->cmd_rsp_virt->smt_mib_get.port_mac_placement[1];
+	bp->stats.port_available_paths[0] = bp->cmd_rsp_virt->smt_mib_get.port_available_paths[0];
+	bp->stats.port_available_paths[1] = bp->cmd_rsp_virt->smt_mib_get.port_available_paths[1];
+	bp->stats.port_pmd_class[0] = bp->cmd_rsp_virt->smt_mib_get.port_pmd_class[0];
+	bp->stats.port_pmd_class[1] = bp->cmd_rsp_virt->smt_mib_get.port_pmd_class[1];
+	bp->stats.port_connection_capabilities[0] = bp->cmd_rsp_virt->smt_mib_get.port_connection_capabilities[0];
+	bp->stats.port_connection_capabilities[1] = bp->cmd_rsp_virt->smt_mib_get.port_connection_capabilities[1];
+	bp->stats.port_bs_flag[0] = bp->cmd_rsp_virt->smt_mib_get.port_bs_flag[0];
+	bp->stats.port_bs_flag[1] = bp->cmd_rsp_virt->smt_mib_get.port_bs_flag[1];
+	bp->stats.port_ler_estimate[0] = bp->cmd_rsp_virt->smt_mib_get.port_ler_estimate[0];
+	bp->stats.port_ler_estimate[1] = bp->cmd_rsp_virt->smt_mib_get.port_ler_estimate[1];
+	bp->stats.port_ler_cutoff[0] = bp->cmd_rsp_virt->smt_mib_get.port_ler_cutoff[0];
+	bp->stats.port_ler_cutoff[1] = bp->cmd_rsp_virt->smt_mib_get.port_ler_cutoff[1];
+	bp->stats.port_ler_alarm[0] = bp->cmd_rsp_virt->smt_mib_get.port_ler_alarm[0];
+	bp->stats.port_ler_alarm[1] = bp->cmd_rsp_virt->smt_mib_get.port_ler_alarm[1];
+	bp->stats.port_connect_state[0] = bp->cmd_rsp_virt->smt_mib_get.port_connect_state[0];
+	bp->stats.port_connect_state[1] = bp->cmd_rsp_virt->smt_mib_get.port_connect_state[1];
+	bp->stats.port_pcm_state[0] = bp->cmd_rsp_virt->smt_mib_get.port_pcm_state[0];
+	bp->stats.port_pcm_state[1] = bp->cmd_rsp_virt->smt_mib_get.port_pcm_state[1];
+	bp->stats.port_pc_withhold[0] = bp->cmd_rsp_virt->smt_mib_get.port_pc_withhold[0];
+	bp->stats.port_pc_withhold[1] = bp->cmd_rsp_virt->smt_mib_get.port_pc_withhold[1];
+	bp->stats.port_ler_flag[0] = bp->cmd_rsp_virt->smt_mib_get.port_ler_flag[0];
+	bp->stats.port_ler_flag[1] = bp->cmd_rsp_virt->smt_mib_get.port_ler_flag[1];
+	bp->stats.port_hardware_present[0] = bp->cmd_rsp_virt->smt_mib_get.port_hardware_present[0];
+	bp->stats.port_hardware_present[1] = bp->cmd_rsp_virt->smt_mib_get.port_hardware_present[1];
+
+
+	/* Fill the bp->stats structure with the FDDI counter values */
+
+	bp->stats.mac_frame_cts = bp->cmd_rsp_virt->cntrs_get.cntrs.frame_cnt.ls;
+	bp->stats.mac_copied_cts = bp->cmd_rsp_virt->cntrs_get.cntrs.copied_cnt.ls;
+	bp->stats.mac_transmit_cts = bp->cmd_rsp_virt->cntrs_get.cntrs.transmit_cnt.ls;
+	bp->stats.mac_error_cts = bp->cmd_rsp_virt->cntrs_get.cntrs.error_cnt.ls;
+	bp->stats.mac_lost_cts = bp->cmd_rsp_virt->cntrs_get.cntrs.lost_cnt.ls;
+	bp->stats.port_lct_fail_cts[0] = bp->cmd_rsp_virt->cntrs_get.cntrs.lct_rejects[0].ls;
+	bp->stats.port_lct_fail_cts[1] = bp->cmd_rsp_virt->cntrs_get.cntrs.lct_rejects[1].ls;
+	bp->stats.port_lem_reject_cts[0] = bp->cmd_rsp_virt->cntrs_get.cntrs.lem_rejects[0].ls;
+	bp->stats.port_lem_reject_cts[1] = bp->cmd_rsp_virt->cntrs_get.cntrs.lem_rejects[1].ls;
+	bp->stats.port_lem_cts[0] = bp->cmd_rsp_virt->cntrs_get.cntrs.link_errors[0].ls;
+	bp->stats.port_lem_cts[1] = bp->cmd_rsp_virt->cntrs_get.cntrs.link_errors[1].ls;
+
+#endif
+	return (struct net_device_stats *)&bp->os.MacStat;
+}				// ctl_get_stat
+
+
+/*
+ * ==============================
+ * = skfp_ctl_set_multicast_list =
+ * ==============================
+ *   
+ * Overview:
+ *   Enable/Disable LLC frame promiscuous mode reception
+ *   on the adapter and/or update multicast address table.
+ *  
+ * Returns:
+ *   None
+ *       
+ * Arguments:
+ *   dev - pointer to device information
+ *
+ * Functional Description:
+ *   This function acquires the driver lock and only calls
+ *   skfp_ctl_set_multicast_list_wo_lock then.
+ *   This routine follows a fairly simple algorithm for setting the
+ *   adapter filters and CAM:
+ *
+ *      if IFF_PROMISC flag is set
+ *              enable promiscuous mode
+ *      else
+ *              disable promiscuous mode
+ *              if number of multicast addresses <= max. multicast number
+ *                      add mc addresses to adapter table
+ *              else
+ *                      enable promiscuous mode
+ *              update adapter filters
+ *
+ * Assumptions:
+ *   Multicast addresses are presented in canonical (LSB) format.
+ *
+ * Side Effects:
+ *   On-board adapter filters are updated.
+ */
+static void skfp_ctl_set_multicast_list(struct net_device *dev)
+{
+	struct s_smc *smc = netdev_priv(dev);
+	skfddi_priv *bp = &smc->os;
+	unsigned long Flags;
+
+	spin_lock_irqsave(&bp->DriverLock, Flags);
+	skfp_ctl_set_multicast_list_wo_lock(dev);
+	spin_unlock_irqrestore(&bp->DriverLock, Flags);
+}				// skfp_ctl_set_multicast_list
+
+
+
+static void skfp_ctl_set_multicast_list_wo_lock(struct net_device *dev)
+{
+	struct s_smc *smc = netdev_priv(dev);
+	struct netdev_hw_addr *ha;
+
+	/* Enable promiscuous mode, if necessary */
+	if (dev->flags & IFF_PROMISC) {
+		mac_drv_rx_mode(smc, RX_ENABLE_PROMISC);
+		pr_debug("PROMISCUOUS MODE ENABLED\n");
+	}
+	/* Else, update multicast address table */
+	else {
+		mac_drv_rx_mode(smc, RX_DISABLE_PROMISC);
+		pr_debug("PROMISCUOUS MODE DISABLED\n");
+
+		// Reset all MC addresses
+		mac_clear_multicast(smc);
+		mac_drv_rx_mode(smc, RX_DISABLE_ALLMULTI);
+
+		if (dev->flags & IFF_ALLMULTI) {
+			mac_drv_rx_mode(smc, RX_ENABLE_ALLMULTI);
+			pr_debug("ENABLE ALL MC ADDRESSES\n");
+		} else if (!netdev_mc_empty(dev)) {
+			if (netdev_mc_count(dev) <= FPMAX_MULTICAST) {
+				/* use exact filtering */
+
+				// point to first multicast addr
+				netdev_for_each_mc_addr(ha, dev) {
+					mac_add_multicast(smc,
+						(struct fddi_addr *)ha->addr,
+						1);
+
+					pr_debug("ENABLE MC ADDRESS: %pMF\n",
+						 ha->addr);
+				}
+
+			} else {	// more MC addresses than HW supports
+
+				mac_drv_rx_mode(smc, RX_ENABLE_ALLMULTI);
+				pr_debug("ENABLE ALL MC ADDRESSES\n");
+			}
+		} else {	// no MC addresses
+
+			pr_debug("DISABLE ALL MC ADDRESSES\n");
+		}
+
+		/* Update adapter filters */
+		mac_update_multicast(smc);
+	}
+}				// skfp_ctl_set_multicast_list_wo_lock
+
+
+/*
+ * ===========================
+ * = skfp_ctl_set_mac_address =
+ * ===========================
+ *   
+ * Overview:
+ *   set new mac address on adapter and update dev_addr field in device table.
+ *  
+ * Returns:
+ *   None
+ *       
+ * Arguments:
+ *   dev  - pointer to device information
+ *   addr - pointer to sockaddr structure containing unicast address to set
+ *
+ * Assumptions:
+ *   The address pointed to by addr->sa_data is a valid unicast
+ *   address and is presented in canonical (LSB) format.
+ */
+static int skfp_ctl_set_mac_address(struct net_device *dev, void *addr)
+{
+	struct s_smc *smc = netdev_priv(dev);
+	struct sockaddr *p_sockaddr = (struct sockaddr *) addr;
+	skfddi_priv *bp = &smc->os;
+	unsigned long Flags;
+
+
+	memcpy(dev->dev_addr, p_sockaddr->sa_data, FDDI_K_ALEN);
+	spin_lock_irqsave(&bp->DriverLock, Flags);
+	ResetAdapter(smc);
+	spin_unlock_irqrestore(&bp->DriverLock, Flags);
+
+	return 0;		/* always return zero */
+}				// skfp_ctl_set_mac_address
+
+
+/*
+ * ==============
+ * = skfp_ioctl =
+ * ==============
+ *   
+ * Overview:
+ *
+ * Perform IOCTL call functions here. Some are privileged operations and the
+ * effective uid is checked in those cases.
+ *  
+ * Returns:
+ *   status value
+ *   0 - success
+ *   other - failure
+ *       
+ * Arguments:
+ *   dev  - pointer to device information
+ *   rq - pointer to ioctl request structure
+ *   cmd - ?
+ *
+ */
+
+
+static int skfp_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+	struct s_smc *smc = netdev_priv(dev);
+	skfddi_priv *lp = &smc->os;
+	struct s_skfp_ioctl ioc;
+	int status = 0;
+
+	if (copy_from_user(&ioc, rq->ifr_data, sizeof(struct s_skfp_ioctl)))
+		return -EFAULT;
+
+	switch (ioc.cmd) {
+	case SKFP_GET_STATS:	/* Get the driver statistics */
+		ioc.len = sizeof(lp->MacStat);
+		status = copy_to_user(ioc.data, skfp_ctl_get_stats(dev), ioc.len)
+				? -EFAULT : 0;
+		break;
+	case SKFP_CLR_STATS:	/* Zero out the driver statistics */
+		if (!capable(CAP_NET_ADMIN)) {
+			status = -EPERM;
+		} else {
+			memset(&lp->MacStat, 0, sizeof(lp->MacStat));
+		}
+		break;
+	default:
+		printk("ioctl for %s: unknown cmd: %04x\n", dev->name, ioc.cmd);
+		status = -EOPNOTSUPP;
+
+	}			// switch
+
+	return status;
+}				// skfp_ioctl
+
+
+/*
+ * =====================
+ * = skfp_send_pkt     =
+ * =====================
+ *   
+ * Overview:
+ *   Queues a packet for transmission and try to transmit it.
+ *  
+ * Returns:
+ *   Condition code
+ *       
+ * Arguments:
+ *   skb - pointer to sk_buff to queue for transmission
+ *   dev - pointer to device information
+ *
+ * Functional Description:
+ *   Here we assume that an incoming skb transmit request
+ *   is contained in a single physically contiguous buffer
+ *   in which the virtual address of the start of packet
+ *   (skb->data) can be converted to a physical address
+ *   by using pci_map_single().
+ *
+ *   We have an internal queue for packets we can not send 
+ *   immediately. Packets in this queue can be given to the 
+ *   adapter if transmit buffers are freed.
+ *
+ *   We can't free the skb until after it's been DMA'd
+ *   out by the adapter, so we'll keep it in the driver and
+ *   return it in mac_drv_tx_complete.
+ *
+ * Return Codes:
+ *   0 - driver has queued and/or sent packet
+ *       1 - caller should requeue the sk_buff for later transmission
+ *
+ * Assumptions:
+ *   The entire packet is stored in one physically
+ *   contiguous buffer which is not cached and whose
+ *   32-bit physical address can be determined.
+ *
+ *   It's vital that this routine is NOT reentered for the
+ *   same board and that the OS is not in another section of
+ *   code (eg. skfp_interrupt) for the same board on a
+ *   different thread.
+ *
+ * Side Effects:
+ *   None
+ */
+static netdev_tx_t skfp_send_pkt(struct sk_buff *skb,
+				       struct net_device *dev)
+{
+	struct s_smc *smc = netdev_priv(dev);
+	skfddi_priv *bp = &smc->os;
+
+	pr_debug("skfp_send_pkt\n");
+
+	/*
+	 * Verify that incoming transmit request is OK
+	 *
+	 * Note: The packet size check is consistent with other
+	 *               Linux device drivers, although the correct packet
+	 *               size should be verified before calling the
+	 *               transmit routine.
+	 */
+
+	if (!(skb->len >= FDDI_K_LLC_ZLEN && skb->len <= FDDI_K_LLC_LEN)) {
+		bp->MacStat.gen.tx_errors++;	/* bump error counter */
+		// dequeue packets from xmt queue and send them
+		netif_start_queue(dev);
+		dev_kfree_skb(skb);
+		return NETDEV_TX_OK;	/* return "success" */
+	}
+	if (bp->QueueSkb == 0) {	// return with tbusy set: queue full
+
+		netif_stop_queue(dev);
+		return NETDEV_TX_BUSY;
+	}
+	bp->QueueSkb--;
+	skb_queue_tail(&bp->SendSkbQueue, skb);
+	send_queued_packets(netdev_priv(dev));
+	if (bp->QueueSkb == 0) {
+		netif_stop_queue(dev);
+	}
+	return NETDEV_TX_OK;
+
+}				// skfp_send_pkt
+
+
+/*
+ * =======================
+ * = send_queued_packets =
+ * =======================
+ *   
+ * Overview:
+ *   Send packets from the driver queue as long as there are some and
+ *   transmit resources are available.
+ *  
+ * Returns:
+ *   None
+ *       
+ * Arguments:
+ *   smc - pointer to smc (adapter) structure
+ *
+ * Functional Description:
+ *   Take a packet from queue if there is any. If not, then we are done.
+ *   Check if there are resources to send the packet. If not, requeue it
+ *   and exit. 
+ *   Set packet descriptor flags and give packet to adapter.
+ *   Check if any send resources can be freed (we do not use the
+ *   transmit complete interrupt).
+ */
+static void send_queued_packets(struct s_smc *smc)
+{
+	skfddi_priv *bp = &smc->os;
+	struct sk_buff *skb;
+	unsigned char fc;
+	int queue;
+	struct s_smt_fp_txd *txd;	// Current TxD.
+	dma_addr_t dma_address;
+	unsigned long Flags;
+
+	int frame_status;	// HWM tx frame status.
+
+	pr_debug("send queued packets\n");
+	for (;;) {
+		// send first buffer from queue
+		skb = skb_dequeue(&bp->SendSkbQueue);
+
+		if (!skb) {
+			pr_debug("queue empty\n");
+			return;
+		}		// queue empty !
+
+		spin_lock_irqsave(&bp->DriverLock, Flags);
+		fc = skb->data[0];
+		queue = (fc & FC_SYNC_BIT) ? QUEUE_S : QUEUE_A0;
+#ifdef ESS
+		// Check if the frame may/must be sent as a synchronous frame.
+
+		if ((fc & ~(FC_SYNC_BIT | FC_LLC_PRIOR)) == FC_ASYNC_LLC) {
+			// It's an LLC frame.
+			if (!smc->ess.sync_bw_available)
+				fc &= ~FC_SYNC_BIT; // No bandwidth available.
+
+			else {	// Bandwidth is available.
+
+				if (smc->mib.fddiESSSynchTxMode) {
+					// Send as sync. frame.
+					fc |= FC_SYNC_BIT;
+				}
+			}
+		}
+#endif				// ESS
+		frame_status = hwm_tx_init(smc, fc, 1, skb->len, queue);
+
+		if ((frame_status & (LOC_TX | LAN_TX)) == 0) {
+			// Unable to send the frame.
+
+			if ((frame_status & RING_DOWN) != 0) {
+				// Ring is down.
+				pr_debug("Tx attempt while ring down.\n");
+			} else if ((frame_status & OUT_OF_TXD) != 0) {
+				pr_debug("%s: out of TXDs.\n", bp->dev->name);
+			} else {
+				pr_debug("%s: out of transmit resources",
+					bp->dev->name);
+			}
+
+			// Note: We will retry the operation as soon as
+			// transmit resources become available.
+			skb_queue_head(&bp->SendSkbQueue, skb);
+			spin_unlock_irqrestore(&bp->DriverLock, Flags);
+			return;	// Packet has been queued.
+
+		}		// if (unable to send frame)
+
+		bp->QueueSkb++;	// one packet less in local queue
+
+		// source address in packet ?
+		CheckSourceAddress(skb->data, smc->hw.fddi_canon_addr.a);
+
+		txd = (struct s_smt_fp_txd *) HWM_GET_CURR_TXD(smc, queue);
+
+		dma_address = pci_map_single(&bp->pdev, skb->data,
+					     skb->len, PCI_DMA_TODEVICE);
+		if (frame_status & LAN_TX) {
+			txd->txd_os.skb = skb;			// save skb
+			txd->txd_os.dma_addr = dma_address;	// save dma mapping
+		}
+		hwm_tx_frag(smc, skb->data, dma_address, skb->len,
+                      frame_status | FIRST_FRAG | LAST_FRAG | EN_IRQ_EOF);
+
+		if (!(frame_status & LAN_TX)) {		// local only frame
+			pci_unmap_single(&bp->pdev, dma_address,
+					 skb->len, PCI_DMA_TODEVICE);
+			dev_kfree_skb_irq(skb);
+		}
+		spin_unlock_irqrestore(&bp->DriverLock, Flags);
+	}			// for
+
+	return;			// never reached
+
+}				// send_queued_packets
+
+
+/************************
+ * 
+ * CheckSourceAddress
+ *
+ * Verify if the source address is set. Insert it if necessary.
+ *
+ ************************/
+static void CheckSourceAddress(unsigned char *frame, unsigned char *hw_addr)
+{
+	unsigned char SRBit;
+
+	if ((((unsigned long) frame[1 + 6]) & ~0x01) != 0) // source routing bit
+
+		return;
+	if ((unsigned short) frame[1 + 10] != 0)
+		return;
+	SRBit = frame[1 + 6] & 0x01;
+	memcpy(&frame[1 + 6], hw_addr, 6);
+	frame[8] |= SRBit;
+}				// CheckSourceAddress
+
+
+/************************
+ *
+ *	ResetAdapter
+ *
+ *	Reset the adapter and bring it back to operational mode.
+ * Args
+ *	smc - A pointer to the SMT context struct.
+ * Out
+ *	Nothing.
+ *
+ ************************/
+static void ResetAdapter(struct s_smc *smc)
+{
+
+	pr_debug("[fddi: ResetAdapter]\n");
+
+	// Stop the adapter.
+
+	card_stop(smc);		// Stop all activity.
+
+	// Clear the transmit and receive descriptor queues.
+	mac_drv_clear_tx_queue(smc);
+	mac_drv_clear_rx_queue(smc);
+
+	// Restart the adapter.
+
+	smt_reset_defaults(smc, 1);	// Initialize the SMT module.
+
+	init_smt(smc, (smc->os.dev)->dev_addr);	// Initialize the hardware.
+
+	smt_online(smc, 1);	// Insert into the ring again.
+	STI_FBI();
+
+	// Restore original receive mode (multicasts, promiscuous, etc.).
+	skfp_ctl_set_multicast_list_wo_lock(smc->os.dev);
+}				// ResetAdapter
+
+
+//--------------- functions called by hardware module ----------------
+
+/************************
+ *
+ *	llc_restart_tx
+ *
+ *	The hardware driver calls this routine when the transmit complete
+ *	interrupt bits (end of frame) for the synchronous or asynchronous
+ *	queue is set.
+ *
+ * NOTE The hardware driver calls this function also if no packets are queued.
+ *	The routine must be able to handle this case.
+ * Args
+ *	smc - A pointer to the SMT context struct.
+ * Out
+ *	Nothing.
+ *
+ ************************/
+void llc_restart_tx(struct s_smc *smc)
+{
+	skfddi_priv *bp = &smc->os;
+
+	pr_debug("[llc_restart_tx]\n");
+
+	// Try to send queued packets
+	spin_unlock(&bp->DriverLock);
+	send_queued_packets(smc);
+	spin_lock(&bp->DriverLock);
+	netif_start_queue(bp->dev);// system may send again if it was blocked
+
+}				// llc_restart_tx
+
+
+/************************
+ *
+ *	mac_drv_get_space
+ *
+ *	The hardware module calls this function to allocate the memory
+ *	for the SMT MBufs if the define MB_OUTSIDE_SMC is specified.
+ * Args
+ *	smc - A pointer to the SMT context struct.
+ *
+ *	size - Size of memory in bytes to allocate.
+ * Out
+ *	!= 0	A pointer to the virtual address of the allocated memory.
+ *	== 0	Allocation error.
+ *
+ ************************/
+void *mac_drv_get_space(struct s_smc *smc, unsigned int size)
+{
+	void *virt;
+
+	pr_debug("mac_drv_get_space (%d bytes), ", size);
+	virt = (void *) (smc->os.SharedMemAddr + smc->os.SharedMemHeap);
+
+	if ((smc->os.SharedMemHeap + size) > smc->os.SharedMemSize) {
+		printk("Unexpected SMT memory size requested: %d\n", size);
+		return NULL;
+	}
+	smc->os.SharedMemHeap += size;	// Move heap pointer.
+
+	pr_debug("mac_drv_get_space end\n");
+	pr_debug("virt addr: %lx\n", (ulong) virt);
+	pr_debug("bus  addr: %lx\n", (ulong)
+	       (smc->os.SharedMemDMA +
+		((char *) virt - (char *)smc->os.SharedMemAddr)));
+	return virt;
+}				// mac_drv_get_space
+
+
+/************************
+ *
+ *	mac_drv_get_desc_mem
+ *
+ *	This function is called by the hardware dependent module.
+ *	It allocates the memory for the RxD and TxD descriptors.
+ *
+ *	This memory must be non-cached, non-movable and non-swappable.
+ *	This memory should start at a physical page boundary.
+ * Args
+ *	smc - A pointer to the SMT context struct.
+ *
+ *	size - Size of memory in bytes to allocate.
+ * Out
+ *	!= 0	A pointer to the virtual address of the allocated memory.
+ *	== 0	Allocation error.
+ *
+ ************************/
+void *mac_drv_get_desc_mem(struct s_smc *smc, unsigned int size)
+{
+
+	char *virt;
+
+	pr_debug("mac_drv_get_desc_mem\n");
+
+	// Descriptor memory must be aligned on 16-byte boundary.
+
+	virt = mac_drv_get_space(smc, size);
+
+	size = (u_int) (16 - (((unsigned long) virt) & 15UL));
+	size = size % 16;
+
+	pr_debug("Allocate %u bytes alignment gap ", size);
+	pr_debug("for descriptor memory.\n");
+
+	if (!mac_drv_get_space(smc, size)) {
+		printk("fddi: Unable to align descriptor memory.\n");
+		return NULL;
+	}
+	return virt + size;
+}				// mac_drv_get_desc_mem
+
+
+/************************
+ *
+ *	mac_drv_virt2phys
+ *
+ *	Get the physical address of a given virtual address.
+ * Args
+ *	smc - A pointer to the SMT context struct.
+ *
+ *	virt - A (virtual) pointer into our 'shared' memory area.
+ * Out
+ *	Physical address of the given virtual address.
+ *
+ ************************/
+unsigned long mac_drv_virt2phys(struct s_smc *smc, void *virt)
+{
+	return smc->os.SharedMemDMA +
+		((char *) virt - (char *)smc->os.SharedMemAddr);
+}				// mac_drv_virt2phys
+
+
+/************************
+ *
+ *	dma_master
+ *
+ *	The HWM calls this function, when the driver leads through a DMA
+ *	transfer. If the OS-specific module must prepare the system hardware
+ *	for the DMA transfer, it should do it in this function.
+ *
+ *	The hardware module calls this dma_master if it wants to send an SMT
+ *	frame.  This means that the virt address passed in here is part of
+ *      the 'shared' memory area.
+ * Args
+ *	smc - A pointer to the SMT context struct.
+ *
+ *	virt - The virtual address of the data.
+ *
+ *	len - The length in bytes of the data.
+ *
+ *	flag - Indicates the transmit direction and the buffer type:
+ *		DMA_RD	(0x01)	system RAM ==> adapter buffer memory
+ *		DMA_WR	(0x02)	adapter buffer memory ==> system RAM
+ *		SMT_BUF (0x80)	SMT buffer
+ *
+ *	>> NOTE: SMT_BUF and DMA_RD are always set for PCI. <<
+ * Out
+ *	Returns the pyhsical address for the DMA transfer.
+ *
+ ************************/
+u_long dma_master(struct s_smc * smc, void *virt, int len, int flag)
+{
+	return smc->os.SharedMemDMA +
+		((char *) virt - (char *)smc->os.SharedMemAddr);
+}				// dma_master
+
+
+/************************
+ *
+ *	dma_complete
+ *
+ *	The hardware module calls this routine when it has completed a DMA
+ *	transfer. If the operating system dependent module has set up the DMA
+ *	channel via dma_master() (e.g. Windows NT or AIX) it should clean up
+ *	the DMA channel.
+ * Args
+ *	smc - A pointer to the SMT context struct.
+ *
+ *	descr - A pointer to a TxD or RxD, respectively.
+ *
+ *	flag - Indicates the DMA transfer direction / SMT buffer:
+ *		DMA_RD	(0x01)	system RAM ==> adapter buffer memory
+ *		DMA_WR	(0x02)	adapter buffer memory ==> system RAM
+ *		SMT_BUF (0x80)	SMT buffer (managed by HWM)
+ * Out
+ *	Nothing.
+ *
+ ************************/
+void dma_complete(struct s_smc *smc, volatile union s_fp_descr *descr, int flag)
+{
+	/* For TX buffers, there are two cases.  If it is an SMT transmit
+	 * buffer, there is nothing to do since we use consistent memory
+	 * for the 'shared' memory area.  The other case is for normal
+	 * transmit packets given to us by the networking stack, and in
+	 * that case we cleanup the PCI DMA mapping in mac_drv_tx_complete
+	 * below.
+	 *
+	 * For RX buffers, we have to unmap dynamic PCI DMA mappings here
+	 * because the hardware module is about to potentially look at
+	 * the contents of the buffer.  If we did not call the PCI DMA
+	 * unmap first, the hardware module could read inconsistent data.
+	 */
+	if (flag & DMA_WR) {
+		skfddi_priv *bp = &smc->os;
+		volatile struct s_smt_fp_rxd *r = &descr->r;
+
+		/* If SKB is NULL, we used the local buffer. */
+		if (r->rxd_os.skb && r->rxd_os.dma_addr) {
+			int MaxFrameSize = bp->MaxFrameSize;
+
+			pci_unmap_single(&bp->pdev, r->rxd_os.dma_addr,
+					 MaxFrameSize, PCI_DMA_FROMDEVICE);
+			r->rxd_os.dma_addr = 0;
+		}
+	}
+}				// dma_complete
+
+
+/************************
+ *
+ *	mac_drv_tx_complete
+ *
+ *	Transmit of a packet is complete. Release the tx staging buffer.
+ *
+ * Args
+ *	smc - A pointer to the SMT context struct.
+ *
+ *	txd - A pointer to the last TxD which is used by the frame.
+ * Out
+ *	Returns nothing.
+ *
+ ************************/
+void mac_drv_tx_complete(struct s_smc *smc, volatile struct s_smt_fp_txd *txd)
+{
+	struct sk_buff *skb;
+
+	pr_debug("entering mac_drv_tx_complete\n");
+	// Check if this TxD points to a skb
+
+	if (!(skb = txd->txd_os.skb)) {
+		pr_debug("TXD with no skb assigned.\n");
+		return;
+	}
+	txd->txd_os.skb = NULL;
+
+	// release the DMA mapping
+	pci_unmap_single(&smc->os.pdev, txd->txd_os.dma_addr,
+			 skb->len, PCI_DMA_TODEVICE);
+	txd->txd_os.dma_addr = 0;
+
+	smc->os.MacStat.gen.tx_packets++;	// Count transmitted packets.
+	smc->os.MacStat.gen.tx_bytes+=skb->len;	// Count bytes
+
+	// free the skb
+	dev_kfree_skb_irq(skb);
+
+	pr_debug("leaving mac_drv_tx_complete\n");
+}				// mac_drv_tx_complete
+
+
+/************************
+ *
+ * dump packets to logfile
+ *
+ ************************/
+#ifdef DUMPPACKETS
+void dump_data(unsigned char *Data, int length)
+{
+	int i, j;
+	unsigned char s[255], sh[10];
+	if (length > 64) {
+		length = 64;
+	}
+	printk(KERN_INFO "---Packet start---\n");
+	for (i = 0, j = 0; i < length / 8; i++, j += 8)
+		printk(KERN_INFO "%02x %02x %02x %02x %02x %02x %02x %02x\n",
+		       Data[j + 0], Data[j + 1], Data[j + 2], Data[j + 3],
+		       Data[j + 4], Data[j + 5], Data[j + 6], Data[j + 7]);
+	strcpy(s, "");
+	for (i = 0; i < length % 8; i++) {
+		sprintf(sh, "%02x ", Data[j + i]);
+		strcat(s, sh);
+	}
+	printk(KERN_INFO "%s\n", s);
+	printk(KERN_INFO "------------------\n");
+}				// dump_data
+#else
+#define dump_data(data,len)
+#endif				// DUMPPACKETS
+
+/************************
+ *
+ *	mac_drv_rx_complete
+ *
+ *	The hardware module calls this function if an LLC frame is received
+ *	in a receive buffer. Also the SMT, NSA, and directed beacon frames
+ *	from the network will be passed to the LLC layer by this function
+ *	if passing is enabled.
+ *
+ *	mac_drv_rx_complete forwards the frame to the LLC layer if it should
+ *	be received. It also fills the RxD ring with new receive buffers if
+ *	some can be queued.
+ * Args
+ *	smc - A pointer to the SMT context struct.
+ *
+ *	rxd - A pointer to the first RxD which is used by the receive frame.
+ *
+ *	frag_count - Count of RxDs used by the received frame.
+ *
+ *	len - Frame length.
+ * Out
+ *	Nothing.
+ *
+ ************************/
+void mac_drv_rx_complete(struct s_smc *smc, volatile struct s_smt_fp_rxd *rxd,
+			 int frag_count, int len)
+{
+	skfddi_priv *bp = &smc->os;
+	struct sk_buff *skb;
+	unsigned char *virt, *cp;
+	unsigned short ri;
+	u_int RifLength;
+
+	pr_debug("entering mac_drv_rx_complete (len=%d)\n", len);
+	if (frag_count != 1) {	// This is not allowed to happen.
+
+		printk("fddi: Multi-fragment receive!\n");
+		goto RequeueRxd;	// Re-use the given RXD(s).
+
+	}
+	skb = rxd->rxd_os.skb;
+	if (!skb) {
+		pr_debug("No skb in rxd\n");
+		smc->os.MacStat.gen.rx_errors++;
+		goto RequeueRxd;
+	}
+	virt = skb->data;
+
+	// The DMA mapping was released in dma_complete above.
+
+	dump_data(skb->data, len);
+
+	/*
+	 * FDDI Frame format:
+	 * +-------+-------+-------+------------+--------+------------+
+	 * | FC[1] | DA[6] | SA[6] | RIF[0..18] | LLC[3] | Data[0..n] |
+	 * +-------+-------+-------+------------+--------+------------+
+	 *
+	 * FC = Frame Control
+	 * DA = Destination Address
+	 * SA = Source Address
+	 * RIF = Routing Information Field
+	 * LLC = Logical Link Control
+	 */
+
+	// Remove Routing Information Field (RIF), if present.
+
+	if ((virt[1 + 6] & FDDI_RII) == 0)
+		RifLength = 0;
+	else {
+		int n;
+// goos: RIF removal has still to be tested
+		pr_debug("RIF found\n");
+		// Get RIF length from Routing Control (RC) field.
+		cp = virt + FDDI_MAC_HDR_LEN;	// Point behind MAC header.
+
+		ri = ntohs(*((__be16 *) cp));
+		RifLength = ri & FDDI_RCF_LEN_MASK;
+		if (len < (int) (FDDI_MAC_HDR_LEN + RifLength)) {
+			printk("fddi: Invalid RIF.\n");
+			goto RequeueRxd;	// Discard the frame.
+
+		}
+		virt[1 + 6] &= ~FDDI_RII;	// Clear RII bit.
+		// regions overlap
+
+		virt = cp + RifLength;
+		for (n = FDDI_MAC_HDR_LEN; n; n--)
+			*--virt = *--cp;
+		// adjust sbd->data pointer
+		skb_pull(skb, RifLength);
+		len -= RifLength;
+		RifLength = 0;
+	}
+
+	// Count statistics.
+	smc->os.MacStat.gen.rx_packets++;	// Count indicated receive
+						// packets.
+	smc->os.MacStat.gen.rx_bytes+=len;	// Count bytes.
+
+	// virt points to header again
+	if (virt[1] & 0x01) {	// Check group (multicast) bit.
+
+		smc->os.MacStat.gen.multicast++;
+	}
+
+	// deliver frame to system
+	rxd->rxd_os.skb = NULL;
+	skb_trim(skb, len);
+	skb->protocol = fddi_type_trans(skb, bp->dev);
+
+	netif_rx(skb);
+
+	HWM_RX_CHECK(smc, RX_LOW_WATERMARK);
+	return;
+
+      RequeueRxd:
+	pr_debug("Rx: re-queue RXD.\n");
+	mac_drv_requeue_rxd(smc, rxd, frag_count);
+	smc->os.MacStat.gen.rx_errors++;	// Count receive packets
+						// not indicated.
+
+}				// mac_drv_rx_complete
+
+
+/************************
+ *
+ *	mac_drv_requeue_rxd
+ *
+ *	The hardware module calls this function to request the OS-specific
+ *	module to queue the receive buffer(s) represented by the pointer
+ *	to the RxD and the frag_count into the receive queue again. This
+ *	buffer was filled with an invalid frame or an SMT frame.
+ * Args
+ *	smc - A pointer to the SMT context struct.
+ *
+ *	rxd - A pointer to the first RxD which is used by the receive frame.
+ *
+ *	frag_count - Count of RxDs used by the received frame.
+ * Out
+ *	Nothing.
+ *
+ ************************/
+void mac_drv_requeue_rxd(struct s_smc *smc, volatile struct s_smt_fp_rxd *rxd,
+			 int frag_count)
+{
+	volatile struct s_smt_fp_rxd *next_rxd;
+	volatile struct s_smt_fp_rxd *src_rxd;
+	struct sk_buff *skb;
+	int MaxFrameSize;
+	unsigned char *v_addr;
+	dma_addr_t b_addr;
+
+	if (frag_count != 1)	// This is not allowed to happen.
+
+		printk("fddi: Multi-fragment requeue!\n");
+
+	MaxFrameSize = smc->os.MaxFrameSize;
+	src_rxd = rxd;
+	for (; frag_count > 0; frag_count--) {
+		next_rxd = src_rxd->rxd_next;
+		rxd = HWM_GET_CURR_RXD(smc);
+
+		skb = src_rxd->rxd_os.skb;
+		if (skb == NULL) {	// this should not happen
+
+			pr_debug("Requeue with no skb in rxd!\n");
+			skb = alloc_skb(MaxFrameSize + 3, GFP_ATOMIC);
+			if (skb) {
+				// we got a skb
+				rxd->rxd_os.skb = skb;
+				skb_reserve(skb, 3);
+				skb_put(skb, MaxFrameSize);
+				v_addr = skb->data;
+				b_addr = pci_map_single(&smc->os.pdev,
+							v_addr,
+							MaxFrameSize,
+							PCI_DMA_FROMDEVICE);
+				rxd->rxd_os.dma_addr = b_addr;
+			} else {
+				// no skb available, use local buffer
+				pr_debug("Queueing invalid buffer!\n");
+				rxd->rxd_os.skb = NULL;
+				v_addr = smc->os.LocalRxBuffer;
+				b_addr = smc->os.LocalRxBufferDMA;
+			}
+		} else {
+			// we use skb from old rxd
+			rxd->rxd_os.skb = skb;
+			v_addr = skb->data;
+			b_addr = pci_map_single(&smc->os.pdev,
+						v_addr,
+						MaxFrameSize,
+						PCI_DMA_FROMDEVICE);
+			rxd->rxd_os.dma_addr = b_addr;
+		}
+		hwm_rx_frag(smc, v_addr, b_addr, MaxFrameSize,
+			    FIRST_FRAG | LAST_FRAG);
+
+		src_rxd = next_rxd;
+	}
+}				// mac_drv_requeue_rxd
+
+
+/************************
+ *
+ *	mac_drv_fill_rxd
+ *
+ *	The hardware module calls this function at initialization time
+ *	to fill the RxD ring with receive buffers. It is also called by
+ *	mac_drv_rx_complete if rx_free is large enough to queue some new
+ *	receive buffers into the RxD ring. mac_drv_fill_rxd queues new
+ *	receive buffers as long as enough RxDs and receive buffers are
+ *	available.
+ * Args
+ *	smc - A pointer to the SMT context struct.
+ * Out
+ *	Nothing.
+ *
+ ************************/
+void mac_drv_fill_rxd(struct s_smc *smc)
+{
+	int MaxFrameSize;
+	unsigned char *v_addr;
+	unsigned long b_addr;
+	struct sk_buff *skb;
+	volatile struct s_smt_fp_rxd *rxd;
+
+	pr_debug("entering mac_drv_fill_rxd\n");
+
+	// Walk through the list of free receive buffers, passing receive
+	// buffers to the HWM as long as RXDs are available.
+
+	MaxFrameSize = smc->os.MaxFrameSize;
+	// Check if there is any RXD left.
+	while (HWM_GET_RX_FREE(smc) > 0) {
+		pr_debug(".\n");
+
+		rxd = HWM_GET_CURR_RXD(smc);
+		skb = alloc_skb(MaxFrameSize + 3, GFP_ATOMIC);
+		if (skb) {
+			// we got a skb
+			skb_reserve(skb, 3);
+			skb_put(skb, MaxFrameSize);
+			v_addr = skb->data;
+			b_addr = pci_map_single(&smc->os.pdev,
+						v_addr,
+						MaxFrameSize,
+						PCI_DMA_FROMDEVICE);
+			rxd->rxd_os.dma_addr = b_addr;
+		} else {
+			// no skb available, use local buffer
+			// System has run out of buffer memory, but we want to
+			// keep the receiver running in hope of better times.
+			// Multiple descriptors may point to this local buffer,
+			// so data in it must be considered invalid.
+			pr_debug("Queueing invalid buffer!\n");
+			v_addr = smc->os.LocalRxBuffer;
+			b_addr = smc->os.LocalRxBufferDMA;
+		}
+
+		rxd->rxd_os.skb = skb;
+
+		// Pass receive buffer to HWM.
+		hwm_rx_frag(smc, v_addr, b_addr, MaxFrameSize,
+			    FIRST_FRAG | LAST_FRAG);
+	}
+	pr_debug("leaving mac_drv_fill_rxd\n");
+}				// mac_drv_fill_rxd
+
+
+/************************
+ *
+ *	mac_drv_clear_rxd
+ *
+ *	The hardware module calls this function to release unused
+ *	receive buffers.
+ * Args
+ *	smc - A pointer to the SMT context struct.
+ *
+ *	rxd - A pointer to the first RxD which is used by the receive buffer.
+ *
+ *	frag_count - Count of RxDs used by the receive buffer.
+ * Out
+ *	Nothing.
+ *
+ ************************/
+void mac_drv_clear_rxd(struct s_smc *smc, volatile struct s_smt_fp_rxd *rxd,
+		       int frag_count)
+{
+
+	struct sk_buff *skb;
+
+	pr_debug("entering mac_drv_clear_rxd\n");
+
+	if (frag_count != 1)	// This is not allowed to happen.
+
+		printk("fddi: Multi-fragment clear!\n");
+
+	for (; frag_count > 0; frag_count--) {
+		skb = rxd->rxd_os.skb;
+		if (skb != NULL) {
+			skfddi_priv *bp = &smc->os;
+			int MaxFrameSize = bp->MaxFrameSize;
+
+			pci_unmap_single(&bp->pdev, rxd->rxd_os.dma_addr,
+					 MaxFrameSize, PCI_DMA_FROMDEVICE);
+
+			dev_kfree_skb(skb);
+			rxd->rxd_os.skb = NULL;
+		}
+		rxd = rxd->rxd_next;	// Next RXD.
+
+	}
+}				// mac_drv_clear_rxd
+
+
+/************************
+ *
+ *	mac_drv_rx_init
+ *
+ *	The hardware module calls this routine when an SMT or NSA frame of the
+ *	local SMT should be delivered to the LLC layer.
+ *
+ *	It is necessary to have this function, because there is no other way to
+ *	copy the contents of SMT MBufs into receive buffers.
+ *
+ *	mac_drv_rx_init allocates the required target memory for this frame,
+ *	and receives the frame fragment by fragment by calling mac_drv_rx_frag.
+ * Args
+ *	smc - A pointer to the SMT context struct.
+ *
+ *	len - The length (in bytes) of the received frame (FC, DA, SA, Data).
+ *
+ *	fc - The Frame Control field of the received frame.
+ *
+ *	look_ahead - A pointer to the lookahead data buffer (may be NULL).
+ *
+ *	la_len - The length of the lookahead data stored in the lookahead
+ *	buffer (may be zero).
+ * Out
+ *	Always returns zero (0).
+ *
+ ************************/
+int mac_drv_rx_init(struct s_smc *smc, int len, int fc,
+		    char *look_ahead, int la_len)
+{
+	struct sk_buff *skb;
+
+	pr_debug("entering mac_drv_rx_init(len=%d)\n", len);
+
+	// "Received" a SMT or NSA frame of the local SMT.
+
+	if (len != la_len || len < FDDI_MAC_HDR_LEN || !look_ahead) {
+		pr_debug("fddi: Discard invalid local SMT frame\n");
+		pr_debug("  len=%d, la_len=%d, (ULONG) look_ahead=%08lXh.\n",
+		       len, la_len, (unsigned long) look_ahead);
+		return 0;
+	}
+	skb = alloc_skb(len + 3, GFP_ATOMIC);
+	if (!skb) {
+		pr_debug("fddi: Local SMT: skb memory exhausted.\n");
+		return 0;
+	}
+	skb_reserve(skb, 3);
+	skb_put(skb, len);
+	skb_copy_to_linear_data(skb, look_ahead, len);
+
+	// deliver frame to system
+	skb->protocol = fddi_type_trans(skb, smc->os.dev);
+	netif_rx(skb);
+
+	return 0;
+}				// mac_drv_rx_init
+
+
+/************************
+ *
+ *	smt_timer_poll
+ *
+ *	This routine is called periodically by the SMT module to clean up the
+ *	driver.
+ *
+ *	Return any queued frames back to the upper protocol layers if the ring
+ *	is down.
+ * Args
+ *	smc - A pointer to the SMT context struct.
+ * Out
+ *	Nothing.
+ *
+ ************************/
+void smt_timer_poll(struct s_smc *smc)
+{
+}				// smt_timer_poll
+
+
+/************************
+ *
+ *	ring_status_indication
+ *
+ *	This function indicates a change of the ring state.
+ * Args
+ *	smc - A pointer to the SMT context struct.
+ *
+ *	status - The current ring status.
+ * Out
+ *	Nothing.
+ *
+ ************************/
+void ring_status_indication(struct s_smc *smc, u_long status)
+{
+	pr_debug("ring_status_indication( ");
+	if (status & RS_RES15)
+		pr_debug("RS_RES15 ");
+	if (status & RS_HARDERROR)
+		pr_debug("RS_HARDERROR ");
+	if (status & RS_SOFTERROR)
+		pr_debug("RS_SOFTERROR ");
+	if (status & RS_BEACON)
+		pr_debug("RS_BEACON ");
+	if (status & RS_PATHTEST)
+		pr_debug("RS_PATHTEST ");
+	if (status & RS_SELFTEST)
+		pr_debug("RS_SELFTEST ");
+	if (status & RS_RES9)
+		pr_debug("RS_RES9 ");
+	if (status & RS_DISCONNECT)
+		pr_debug("RS_DISCONNECT ");
+	if (status & RS_RES7)
+		pr_debug("RS_RES7 ");
+	if (status & RS_DUPADDR)
+		pr_debug("RS_DUPADDR ");
+	if (status & RS_NORINGOP)
+		pr_debug("RS_NORINGOP ");
+	if (status & RS_VERSION)
+		pr_debug("RS_VERSION ");
+	if (status & RS_STUCKBYPASSS)
+		pr_debug("RS_STUCKBYPASSS ");
+	if (status & RS_EVENT)
+		pr_debug("RS_EVENT ");
+	if (status & RS_RINGOPCHANGE)
+		pr_debug("RS_RINGOPCHANGE ");
+	if (status & RS_RES0)
+		pr_debug("RS_RES0 ");
+	pr_debug("]\n");
+}				// ring_status_indication
+
+
+/************************
+ *
+ *	smt_get_time
+ *
+ *	Gets the current time from the system.
+ * Args
+ *	None.
+ * Out
+ *	The current time in TICKS_PER_SECOND.
+ *
+ *	TICKS_PER_SECOND has the unit 'count of timer ticks per second'. It is
+ *	defined in "targetos.h". The definition of TICKS_PER_SECOND must comply
+ *	to the time returned by smt_get_time().
+ *
+ ************************/
+unsigned long smt_get_time(void)
+{
+	return jiffies;
+}				// smt_get_time
+
+
+/************************
+ *
+ *	smt_stat_counter
+ *
+ *	Status counter update (ring_op, fifo full).
+ * Args
+ *	smc - A pointer to the SMT context struct.
+ *
+ *	stat -	= 0: A ring operational change occurred.
+ *		= 1: The FORMAC FIFO buffer is full / FIFO overflow.
+ * Out
+ *	Nothing.
+ *
+ ************************/
+void smt_stat_counter(struct s_smc *smc, int stat)
+{
+//      BOOLEAN RingIsUp ;
+
+	pr_debug("smt_stat_counter\n");
+	switch (stat) {
+	case 0:
+		pr_debug("Ring operational change.\n");
+		break;
+	case 1:
+		pr_debug("Receive fifo overflow.\n");
+		smc->os.MacStat.gen.rx_errors++;
+		break;
+	default:
+		pr_debug("Unknown status (%d).\n", stat);
+		break;
+	}
+}				// smt_stat_counter
+
+
+/************************
+ *
+ *	cfm_state_change
+ *
+ *	Sets CFM state in custom statistics.
+ * Args
+ *	smc - A pointer to the SMT context struct.
+ *
+ *	c_state - Possible values are:
+ *
+ *		EC0_OUT, EC1_IN, EC2_TRACE, EC3_LEAVE, EC4_PATH_TEST,
+ *		EC5_INSERT, EC6_CHECK, EC7_DEINSERT
+ * Out
+ *	Nothing.
+ *
+ ************************/
+void cfm_state_change(struct s_smc *smc, int c_state)
+{
+#ifdef DRIVERDEBUG
+	char *s;
+
+	switch (c_state) {
+	case SC0_ISOLATED:
+		s = "SC0_ISOLATED";
+		break;
+	case SC1_WRAP_A:
+		s = "SC1_WRAP_A";
+		break;
+	case SC2_WRAP_B:
+		s = "SC2_WRAP_B";
+		break;
+	case SC4_THRU_A:
+		s = "SC4_THRU_A";
+		break;
+	case SC5_THRU_B:
+		s = "SC5_THRU_B";
+		break;
+	case SC7_WRAP_S:
+		s = "SC7_WRAP_S";
+		break;
+	case SC9_C_WRAP_A:
+		s = "SC9_C_WRAP_A";
+		break;
+	case SC10_C_WRAP_B:
+		s = "SC10_C_WRAP_B";
+		break;
+	case SC11_C_WRAP_S:
+		s = "SC11_C_WRAP_S";
+		break;
+	default:
+		pr_debug("cfm_state_change: unknown %d\n", c_state);
+		return;
+	}
+	pr_debug("cfm_state_change: %s\n", s);
+#endif				// DRIVERDEBUG
+}				// cfm_state_change
+
+
+/************************
+ *
+ *	ecm_state_change
+ *
+ *	Sets ECM state in custom statistics.
+ * Args
+ *	smc - A pointer to the SMT context struct.
+ *
+ *	e_state - Possible values are:
+ *
+ *		SC0_ISOLATED, SC1_WRAP_A (5), SC2_WRAP_B (6), SC4_THRU_A (12),
+ *		SC5_THRU_B (7), SC7_WRAP_S (8)
+ * Out
+ *	Nothing.
+ *
+ ************************/
+void ecm_state_change(struct s_smc *smc, int e_state)
+{
+#ifdef DRIVERDEBUG
+	char *s;
+
+	switch (e_state) {
+	case EC0_OUT:
+		s = "EC0_OUT";
+		break;
+	case EC1_IN:
+		s = "EC1_IN";
+		break;
+	case EC2_TRACE:
+		s = "EC2_TRACE";
+		break;
+	case EC3_LEAVE:
+		s = "EC3_LEAVE";
+		break;
+	case EC4_PATH_TEST:
+		s = "EC4_PATH_TEST";
+		break;
+	case EC5_INSERT:
+		s = "EC5_INSERT";
+		break;
+	case EC6_CHECK:
+		s = "EC6_CHECK";
+		break;
+	case EC7_DEINSERT:
+		s = "EC7_DEINSERT";
+		break;
+	default:
+		s = "unknown";
+		break;
+	}
+	pr_debug("ecm_state_change: %s\n", s);
+#endif				//DRIVERDEBUG
+}				// ecm_state_change
+
+
+/************************
+ *
+ *	rmt_state_change
+ *
+ *	Sets RMT state in custom statistics.
+ * Args
+ *	smc - A pointer to the SMT context struct.
+ *
+ *	r_state - Possible values are:
+ *
+ *		RM0_ISOLATED, RM1_NON_OP, RM2_RING_OP, RM3_DETECT,
+ *		RM4_NON_OP_DUP, RM5_RING_OP_DUP, RM6_DIRECTED, RM7_TRACE
+ * Out
+ *	Nothing.
+ *
+ ************************/
+void rmt_state_change(struct s_smc *smc, int r_state)
+{
+#ifdef DRIVERDEBUG
+	char *s;
+
+	switch (r_state) {
+	case RM0_ISOLATED:
+		s = "RM0_ISOLATED";
+		break;
+	case RM1_NON_OP:
+		s = "RM1_NON_OP - not operational";
+		break;
+	case RM2_RING_OP:
+		s = "RM2_RING_OP - ring operational";
+		break;
+	case RM3_DETECT:
+		s = "RM3_DETECT - detect dupl addresses";
+		break;
+	case RM4_NON_OP_DUP:
+		s = "RM4_NON_OP_DUP - dupl. addr detected";
+		break;
+	case RM5_RING_OP_DUP:
+		s = "RM5_RING_OP_DUP - ring oper. with dupl. addr";
+		break;
+	case RM6_DIRECTED:
+		s = "RM6_DIRECTED - sending directed beacons";
+		break;
+	case RM7_TRACE:
+		s = "RM7_TRACE - trace initiated";
+		break;
+	default:
+		s = "unknown";
+		break;
+	}
+	pr_debug("[rmt_state_change: %s]\n", s);
+#endif				// DRIVERDEBUG
+}				// rmt_state_change
+
+
+/************************
+ *
+ *	drv_reset_indication
+ *
+ *	This function is called by the SMT when it has detected a severe
+ *	hardware problem. The driver should perform a reset on the adapter
+ *	as soon as possible, but not from within this function.
+ * Args
+ *	smc - A pointer to the SMT context struct.
+ * Out
+ *	Nothing.
+ *
+ ************************/
+void drv_reset_indication(struct s_smc *smc)
+{
+	pr_debug("entering drv_reset_indication\n");
+
+	smc->os.ResetRequested = TRUE;	// Set flag.
+
+}				// drv_reset_indication
+
+static struct pci_driver skfddi_pci_driver = {
+	.name		= "skfddi",
+	.id_table	= skfddi_pci_tbl,
+	.probe		= skfp_init_one,
+	.remove		= __devexit_p(skfp_remove_one),
+};
+
+static int __init skfd_init(void)
+{
+	return pci_register_driver(&skfddi_pci_driver);
+}
+
+static void __exit skfd_exit(void)
+{
+	pci_unregister_driver(&skfddi_pci_driver);
+}
+
+module_init(skfd_init);
+module_exit(skfd_exit);
diff --git a/drivers/net/fddi/skfp/smt.c b/drivers/net/fddi/skfp/smt.c
new file mode 100644
index 0000000..08d9432
--- /dev/null
+++ b/drivers/net/fddi/skfp/smt.c
@@ -0,0 +1,2046 @@
+/******************************************************************************
+ *
+ *	(C)Copyright 1998,1999 SysKonnect,
+ *	a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ *	See the file "skfddi.c" for further information.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+#include "h/types.h"
+#include "h/fddi.h"
+#include "h/smc.h"
+#include "h/smt_p.h"
+#include <linux/bitrev.h>
+#include <linux/kernel.h>
+
+#define KERNEL
+#include "h/smtstate.h"
+
+#ifndef	lint
+static const char ID_sccs[] = "@(#)smt.c	2.43 98/11/23 (C) SK " ;
+#endif
+
+/*
+ * FC in SMbuf
+ */
+#define m_fc(mb)	((mb)->sm_data[0])
+
+#define SMT_TID_MAGIC	0x1f0a7b3c
+
+#ifdef	DEBUG
+static const char *const smt_type_name[] = {
+	"SMT_00??", "SMT_INFO", "SMT_02??", "SMT_03??",
+	"SMT_04??", "SMT_05??", "SMT_06??", "SMT_07??",
+	"SMT_08??", "SMT_09??", "SMT_0A??", "SMT_0B??",
+	"SMT_0C??", "SMT_0D??", "SMT_0E??", "SMT_NSA"
+} ;
+
+static const char *const smt_class_name[] = {
+	"UNKNOWN","NIF","SIF_CONFIG","SIF_OPER","ECF","RAF","RDF",
+	"SRF","PMF_GET","PMF_SET","ESF"
+} ;
+#endif
+#define LAST_CLASS	(SMT_PMF_SET)
+
+static const struct fddi_addr SMT_Unknown = {
+	{ 0,0,0x1f,0,0,0 }
+} ;
+
+/*
+ * function prototypes
+ */
+#ifdef	LITTLE_ENDIAN
+static int smt_swap_short(u_short s);
+#endif
+static int mac_index(struct s_smc *smc, int mac);
+static int phy_index(struct s_smc *smc, int phy);
+static int mac_con_resource_index(struct s_smc *smc, int mac);
+static int phy_con_resource_index(struct s_smc *smc, int phy);
+static void smt_send_rdf(struct s_smc *smc, SMbuf *rej, int fc, int reason,
+			 int local);
+static void smt_send_nif(struct s_smc *smc, const struct fddi_addr *dest, 
+			 int fc, u_long tid, int type, int local);
+static void smt_send_ecf(struct s_smc *smc, struct fddi_addr *dest, int fc,
+                         u_long tid, int type, int len);
+static void smt_echo_test(struct s_smc *smc, int dna);
+static void smt_send_sif_config(struct s_smc *smc, struct fddi_addr *dest,
+				u_long tid, int local);
+static void smt_send_sif_operation(struct s_smc *smc, struct fddi_addr *dest,
+				   u_long tid, int local);
+#ifdef LITTLE_ENDIAN
+static void smt_string_swap(char *data, const char *format, int len);
+#endif
+static void smt_add_frame_len(SMbuf *mb, int len);
+static void smt_fill_una(struct s_smc *smc, struct smt_p_una *una);
+static void smt_fill_sde(struct s_smc *smc, struct smt_p_sde *sde);
+static void smt_fill_state(struct s_smc *smc, struct smt_p_state *state);
+static void smt_fill_timestamp(struct s_smc *smc, struct smt_p_timestamp *ts);
+static void smt_fill_policy(struct s_smc *smc, struct smt_p_policy *policy);
+static void smt_fill_latency(struct s_smc *smc, struct smt_p_latency *latency);
+static void smt_fill_neighbor(struct s_smc *smc, struct smt_p_neighbor *neighbor);
+static int smt_fill_path(struct s_smc *smc, struct smt_p_path *path);
+static void smt_fill_mac_status(struct s_smc *smc, struct smt_p_mac_status *st);
+static void smt_fill_lem(struct s_smc *smc, struct smt_p_lem *lem, int phy);
+static void smt_fill_version(struct s_smc *smc, struct smt_p_version *vers);
+static void smt_fill_fsc(struct s_smc *smc, struct smt_p_fsc *fsc);
+static void smt_fill_mac_counter(struct s_smc *smc, struct smt_p_mac_counter *mc);
+static void smt_fill_mac_fnc(struct s_smc *smc, struct smt_p_mac_fnc *fnc);
+static void smt_fill_manufacturer(struct s_smc *smc, 
+				  struct smp_p_manufacturer *man);
+static void smt_fill_user(struct s_smc *smc, struct smp_p_user *user);
+static void smt_fill_setcount(struct s_smc *smc, struct smt_p_setcount *setcount);
+static void smt_fill_echo(struct s_smc *smc, struct smt_p_echo *echo, u_long seed,
+			  int len);
+
+static void smt_clear_una_dna(struct s_smc *smc);
+static void smt_clear_old_una_dna(struct s_smc *smc);
+#ifdef	CONCENTRATOR
+static int entity_to_index(void);
+#endif
+static void update_dac(struct s_smc *smc, int report);
+static int div_ratio(u_long upper, u_long lower);
+#ifdef  USE_CAN_ADDR
+static void	hwm_conv_can(struct s_smc *smc, char *data, int len);
+#else
+#define		hwm_conv_can(smc,data,len)
+#endif
+
+
+static inline int is_my_addr(const struct s_smc *smc, 
+			     const struct fddi_addr *addr)
+{
+	return(*(short *)(&addr->a[0]) ==
+		*(short *)(&smc->mib.m[MAC0].fddiMACSMTAddress.a[0])
+	  && *(short *)(&addr->a[2]) ==
+		*(short *)(&smc->mib.m[MAC0].fddiMACSMTAddress.a[2])
+	  && *(short *)(&addr->a[4]) ==
+		*(short *)(&smc->mib.m[MAC0].fddiMACSMTAddress.a[4])) ;
+}
+
+static inline int is_broadcast(const struct fddi_addr *addr)
+{
+	return *(u_short *)(&addr->a[0]) == 0xffff &&
+	       *(u_short *)(&addr->a[2]) == 0xffff &&
+	       *(u_short *)(&addr->a[4]) == 0xffff;
+}
+
+static inline int is_individual(const struct fddi_addr *addr)
+{
+	return !(addr->a[0] & GROUP_ADDR);
+}
+
+static inline int is_equal(const struct fddi_addr *addr1, 
+			   const struct fddi_addr *addr2)
+{
+	return *(u_short *)(&addr1->a[0]) == *(u_short *)(&addr2->a[0]) &&
+	       *(u_short *)(&addr1->a[2]) == *(u_short *)(&addr2->a[2]) &&
+	       *(u_short *)(&addr1->a[4]) == *(u_short *)(&addr2->a[4]);
+}
+
+/*
+ * list of mandatory paras in frames
+ */
+static const u_short plist_nif[] = { SMT_P_UNA,SMT_P_SDE,SMT_P_STATE,0 } ;
+
+/*
+ * init SMT agent
+ */
+void smt_agent_init(struct s_smc *smc)
+{
+	int		i ;
+
+	/*
+	 * get MAC address
+	 */
+	smc->mib.m[MAC0].fddiMACSMTAddress = smc->hw.fddi_home_addr ;
+
+	/*
+	 * get OUI address from driver (bia == built-in-address)
+	 */
+	smc->mib.fddiSMTStationId.sid_oem[0] = 0 ;
+	smc->mib.fddiSMTStationId.sid_oem[1] = 0 ;
+	driver_get_bia(smc,&smc->mib.fddiSMTStationId.sid_node) ;
+	for (i = 0 ; i < 6 ; i ++) {
+		smc->mib.fddiSMTStationId.sid_node.a[i] =
+			bitrev8(smc->mib.fddiSMTStationId.sid_node.a[i]);
+	}
+	smc->mib.fddiSMTManufacturerData[0] =
+		smc->mib.fddiSMTStationId.sid_node.a[0] ;
+	smc->mib.fddiSMTManufacturerData[1] =
+		smc->mib.fddiSMTStationId.sid_node.a[1] ;
+	smc->mib.fddiSMTManufacturerData[2] =
+		smc->mib.fddiSMTStationId.sid_node.a[2] ;
+	smc->sm.smt_tid = 0 ;
+	smc->mib.m[MAC0].fddiMACDupAddressTest = DA_NONE ;
+	smc->mib.m[MAC0].fddiMACUNDA_Flag = FALSE ;
+#ifndef	SLIM_SMT
+	smt_clear_una_dna(smc) ;
+	smt_clear_old_una_dna(smc) ;
+#endif
+	for (i = 0 ; i < SMT_MAX_TEST ; i++)
+		smc->sm.pend[i] = 0 ;
+	smc->sm.please_reconnect = 0 ;
+	smc->sm.uniq_ticks = 0 ;
+}
+
+/*
+ * SMT task
+ * forever
+ *	delay 30 seconds
+ *	send NIF
+ *	check tvu & tvd
+ * end
+ */
+void smt_agent_task(struct s_smc *smc)
+{
+	smt_timer_start(smc,&smc->sm.smt_timer, (u_long)1000000L,
+		EV_TOKEN(EVENT_SMT,SM_TIMER)) ;
+	DB_SMT("SMT agent task\n",0,0) ;
+}
+
+#ifndef SMT_REAL_TOKEN_CT
+void smt_emulate_token_ct(struct s_smc *smc, int mac_index)
+{
+	u_long	count;
+	u_long	time;
+
+
+	time = smt_get_time();
+	count =	((time - smc->sm.last_tok_time[mac_index]) *
+					100)/TICKS_PER_SECOND;
+
+	/*
+	 * Only when ring is up we will have a token count. The
+	 * flag is unfortunately a single instance value. This
+	 * doesn't matter now, because we currently have only
+	 * one MAC instance.
+	 */
+	if (smc->hw.mac_ring_is_up){
+		smc->mib.m[mac_index].fddiMACToken_Ct += count;
+	}
+
+	/* Remember current time */
+	smc->sm.last_tok_time[mac_index] = time;
+
+}
+#endif
+
+/*ARGSUSED1*/
+void smt_event(struct s_smc *smc, int event)
+{
+	u_long		time ;
+#ifndef SMT_REAL_TOKEN_CT
+	int		i ;
+#endif
+
+
+	if (smc->sm.please_reconnect) {
+		smc->sm.please_reconnect -- ;
+		if (smc->sm.please_reconnect == 0) {
+			/* Counted down */
+			queue_event(smc,EVENT_ECM,EC_CONNECT) ;
+		}
+	}
+
+	if (event == SM_FAST)
+		return ;
+
+	/*
+	 * timer for periodic cleanup in driver
+	 * reset and start the watchdog (FM2)
+	 * ESS timer
+	 * SBA timer
+	 */
+	smt_timer_poll(smc) ;
+	smt_start_watchdog(smc) ;
+#ifndef	SLIM_SMT
+#ifndef BOOT
+#ifdef	ESS
+	ess_timer_poll(smc) ;
+#endif
+#endif
+#ifdef	SBA
+	sba_timer_poll(smc) ;
+#endif
+
+	smt_srf_event(smc,0,0,0) ;
+
+#endif	/* no SLIM_SMT */
+
+	time = smt_get_time() ;
+
+	if (time - smc->sm.smt_last_lem >= TICKS_PER_SECOND*8) {
+		/*
+		 * Use 8 sec. for the time intervall, it simplifies the
+		 * LER estimation.
+		 */
+		struct fddi_mib_m	*mib ;
+		u_long			upper ;
+		u_long			lower ;
+		int			cond ;
+		int			port;
+		struct s_phy		*phy ;
+		/*
+		 * calculate LEM bit error rate
+		 */
+		sm_lem_evaluate(smc) ;
+		smc->sm.smt_last_lem = time ;
+
+		/*
+		 * check conditions
+		 */
+#ifndef	SLIM_SMT
+		mac_update_counter(smc) ;
+		mib = smc->mib.m ;
+		upper =
+		(mib->fddiMACLost_Ct - mib->fddiMACOld_Lost_Ct) +
+		(mib->fddiMACError_Ct - mib->fddiMACOld_Error_Ct) ;
+		lower =
+		(mib->fddiMACFrame_Ct - mib->fddiMACOld_Frame_Ct) +
+		(mib->fddiMACLost_Ct - mib->fddiMACOld_Lost_Ct) ;
+		mib->fddiMACFrameErrorRatio = div_ratio(upper,lower) ;
+
+		cond =
+			((!mib->fddiMACFrameErrorThreshold &&
+			mib->fddiMACError_Ct != mib->fddiMACOld_Error_Ct) ||
+			(mib->fddiMACFrameErrorRatio >
+			mib->fddiMACFrameErrorThreshold)) ;
+
+		if (cond != mib->fddiMACFrameErrorFlag)
+			smt_srf_event(smc,SMT_COND_MAC_FRAME_ERROR,
+				INDEX_MAC,cond) ;
+
+		upper =
+		(mib->fddiMACNotCopied_Ct - mib->fddiMACOld_NotCopied_Ct) ;
+		lower =
+		upper +
+		(mib->fddiMACCopied_Ct - mib->fddiMACOld_Copied_Ct) ;
+		mib->fddiMACNotCopiedRatio = div_ratio(upper,lower) ;
+
+		cond =
+			((!mib->fddiMACNotCopiedThreshold &&
+			mib->fddiMACNotCopied_Ct !=
+				mib->fddiMACOld_NotCopied_Ct)||
+			(mib->fddiMACNotCopiedRatio >
+			mib->fddiMACNotCopiedThreshold)) ;
+
+		if (cond != mib->fddiMACNotCopiedFlag)
+			smt_srf_event(smc,SMT_COND_MAC_NOT_COPIED,
+				INDEX_MAC,cond) ;
+
+		/*
+		 * set old values
+		 */
+		mib->fddiMACOld_Frame_Ct = mib->fddiMACFrame_Ct ;
+		mib->fddiMACOld_Copied_Ct = mib->fddiMACCopied_Ct ;
+		mib->fddiMACOld_Error_Ct = mib->fddiMACError_Ct ;
+		mib->fddiMACOld_Lost_Ct = mib->fddiMACLost_Ct ;
+		mib->fddiMACOld_NotCopied_Ct = mib->fddiMACNotCopied_Ct ;
+
+		/*
+		 * Check port EBError Condition
+		 */
+		for (port = 0; port < NUMPHYS; port ++) {
+			phy = &smc->y[port] ;
+
+			if (!phy->mib->fddiPORTHardwarePresent) {
+				continue;
+			}
+
+			cond = (phy->mib->fddiPORTEBError_Ct -
+				phy->mib->fddiPORTOldEBError_Ct > 5) ;
+
+			/* If ratio is more than 5 in 8 seconds
+			 * Set the condition.
+			 */
+			smt_srf_event(smc,SMT_COND_PORT_EB_ERROR,
+				(int) (INDEX_PORT+ phy->np) ,cond) ;
+
+			/*
+			 * set old values
+			 */
+			phy->mib->fddiPORTOldEBError_Ct =
+				phy->mib->fddiPORTEBError_Ct ;
+		}
+
+#endif	/* no SLIM_SMT */
+	}
+
+#ifndef	SLIM_SMT
+
+	if (time - smc->sm.smt_last_notify >= (u_long)
+		(smc->mib.fddiSMTTT_Notify * TICKS_PER_SECOND) ) {
+		/*
+		 * we can either send an announcement or a request
+		 * a request will trigger a reply so that we can update
+		 * our dna
+		 * note: same tid must be used until reply is received
+		 */
+		if (!smc->sm.pend[SMT_TID_NIF])
+			smc->sm.pend[SMT_TID_NIF] = smt_get_tid(smc) ;
+		smt_send_nif(smc,&fddi_broadcast, FC_SMT_NSA,
+			smc->sm.pend[SMT_TID_NIF], SMT_REQUEST,0) ;
+		smc->sm.smt_last_notify = time ;
+	}
+
+	/*
+	 * check timer
+	 */
+	if (smc->sm.smt_tvu &&
+	    time - smc->sm.smt_tvu > 228*TICKS_PER_SECOND) {
+		DB_SMT("SMT : UNA expired\n",0,0) ;
+		smc->sm.smt_tvu = 0 ;
+
+		if (!is_equal(&smc->mib.m[MAC0].fddiMACUpstreamNbr,
+			&SMT_Unknown)){
+			/* Do not update unknown address */
+			smc->mib.m[MAC0].fddiMACOldUpstreamNbr=
+				smc->mib.m[MAC0].fddiMACUpstreamNbr ;
+		}
+		smc->mib.m[MAC0].fddiMACUpstreamNbr = SMT_Unknown ;
+		smc->mib.m[MAC0].fddiMACUNDA_Flag = FALSE ;
+		/*
+		 * Make sure the fddiMACUNDA_Flag = FALSE is
+		 * included in the SRF so we don't generate
+		 * a separate SRF for the deassertion of this
+		 * condition
+		 */
+		update_dac(smc,0) ;
+		smt_srf_event(smc, SMT_EVENT_MAC_NEIGHBOR_CHANGE,
+			INDEX_MAC,0) ;
+	}
+	if (smc->sm.smt_tvd &&
+	    time - smc->sm.smt_tvd > 228*TICKS_PER_SECOND) {
+		DB_SMT("SMT : DNA expired\n",0,0) ;
+		smc->sm.smt_tvd = 0 ;
+		if (!is_equal(&smc->mib.m[MAC0].fddiMACDownstreamNbr,
+			&SMT_Unknown)){
+			/* Do not update unknown address */
+			smc->mib.m[MAC0].fddiMACOldDownstreamNbr=
+				smc->mib.m[MAC0].fddiMACDownstreamNbr ;
+		}
+		smc->mib.m[MAC0].fddiMACDownstreamNbr = SMT_Unknown ;
+		smt_srf_event(smc, SMT_EVENT_MAC_NEIGHBOR_CHANGE,
+			INDEX_MAC,0) ;
+	}
+
+#endif	/* no SLIM_SMT */
+
+#ifndef SMT_REAL_TOKEN_CT
+	/*
+	 * Token counter emulation section. If hardware supports the token
+	 * count, the token counter will be updated in mac_update_counter.
+	 */
+	for (i = MAC0; i < NUMMACS; i++ ){
+		if (time - smc->sm.last_tok_time[i] > 2*TICKS_PER_SECOND ){
+			smt_emulate_token_ct( smc, i );
+		}
+	}
+#endif
+
+	smt_timer_start(smc,&smc->sm.smt_timer, (u_long)1000000L,
+		EV_TOKEN(EVENT_SMT,SM_TIMER)) ;
+}
+
+static int div_ratio(u_long upper, u_long lower)
+{
+	if ((upper<<16L) < upper)
+		upper = 0xffff0000L ;
+	else
+		upper <<= 16L ;
+	if (!lower)
+		return 0;
+	return (int)(upper/lower) ;
+}
+
+#ifndef	SLIM_SMT
+
+/*
+ * receive packet handler
+ */
+void smt_received_pack(struct s_smc *smc, SMbuf *mb, int fs)
+/* int fs;  frame status */
+{
+	struct smt_header	*sm ;
+	int			local ;
+
+	int			illegal = 0 ;
+
+	switch (m_fc(mb)) {
+	case FC_SMT_INFO :
+	case FC_SMT_LAN_LOC :
+	case FC_SMT_LOC :
+	case FC_SMT_NSA :
+		break ;
+	default :
+		smt_free_mbuf(smc,mb) ;
+		return ;
+	}
+
+	smc->mib.m[MAC0].fddiMACSMTCopied_Ct++ ;
+	sm = smtod(mb,struct smt_header *) ;
+	local = ((fs & L_INDICATOR) != 0) ;
+	hwm_conv_can(smc,(char *)sm,12) ;
+
+	/* check destination address */
+	if (is_individual(&sm->smt_dest) && !is_my_addr(smc,&sm->smt_dest)) {
+		smt_free_mbuf(smc,mb) ;
+		return ;
+	}
+#if	0		/* for DUP recognition, do NOT filter them */
+	/* ignore loop back packets */
+	if (is_my_addr(smc,&sm->smt_source) && !local) {
+		smt_free_mbuf(smc,mb) ;
+		return ;
+	}
+#endif
+
+	smt_swap_para(sm,(int) mb->sm_len,1) ;
+	DB_SMT("SMT : received packet [%s] at 0x%x\n",
+		smt_type_name[m_fc(mb) & 0xf],sm) ;
+	DB_SMT("SMT : version %d, class %s\n",sm->smt_version,
+		smt_class_name[(sm->smt_class>LAST_CLASS)?0 : sm->smt_class]) ;
+
+#ifdef	SBA
+	/*
+	 * check if NSA frame
+	 */
+	if (m_fc(mb) == FC_SMT_NSA && sm->smt_class == SMT_NIF &&
+		(sm->smt_type == SMT_ANNOUNCE || sm->smt_type == SMT_REQUEST)) {
+			smc->sba.sm = sm ;
+			sba(smc,NIF) ;
+	}
+#endif
+
+	/*
+	 * ignore any packet with NSA and A-indicator set
+	 */
+	if ( (fs & A_INDICATOR) && m_fc(mb) == FC_SMT_NSA) {
+		DB_SMT("SMT : ignoring NSA with A-indicator set from %s\n",
+			addr_to_string(&sm->smt_source),0) ;
+		smt_free_mbuf(smc,mb) ;
+		return ;
+	}
+
+	/*
+	 * ignore frames with illegal length
+	 */
+	if (((sm->smt_class == SMT_ECF) && (sm->smt_len > SMT_MAX_ECHO_LEN)) ||
+	    ((sm->smt_class != SMT_ECF) && (sm->smt_len > SMT_MAX_INFO_LEN))) {
+		smt_free_mbuf(smc,mb) ;
+		return ;
+	}
+
+	/*
+	 * check SMT version
+	 */
+	switch (sm->smt_class) {
+	case SMT_NIF :
+	case SMT_SIF_CONFIG :
+	case SMT_SIF_OPER :
+	case SMT_ECF :
+		if (sm->smt_version != SMT_VID)
+			illegal = 1;
+		break ;
+	default :
+		if (sm->smt_version != SMT_VID_2)
+			illegal = 1;
+		break ;
+	}
+	if (illegal) {
+		DB_SMT("SMT : version = %d, dest = %s\n",
+			sm->smt_version,addr_to_string(&sm->smt_source)) ;
+		smt_send_rdf(smc,mb,m_fc(mb),SMT_RDF_VERSION,local) ;
+		smt_free_mbuf(smc,mb) ;
+		return ;
+	}
+	if ((sm->smt_len > mb->sm_len - sizeof(struct smt_header)) ||
+	    ((sm->smt_len & 3) && (sm->smt_class != SMT_ECF))) {
+		DB_SMT("SMT: info length error, len = %d\n",sm->smt_len,0) ;
+		smt_send_rdf(smc,mb,m_fc(mb),SMT_RDF_LENGTH,local) ;
+		smt_free_mbuf(smc,mb) ;
+		return ;
+	}
+	switch (sm->smt_class) {
+	case SMT_NIF :
+		if (smt_check_para(smc,sm,plist_nif)) {
+			DB_SMT("SMT: NIF with para problem, ignoring\n",0,0) ;
+			break ;
+		}
+		switch (sm->smt_type) {
+		case SMT_ANNOUNCE :
+		case SMT_REQUEST :
+			if (!(fs & C_INDICATOR) && m_fc(mb) == FC_SMT_NSA
+				&& is_broadcast(&sm->smt_dest)) {
+				struct smt_p_state	*st ;
+
+				/* set my UNA */
+				if (!is_equal(
+					&smc->mib.m[MAC0].fddiMACUpstreamNbr,
+					&sm->smt_source)) {
+					DB_SMT("SMT : updated my UNA = %s\n",
+					addr_to_string(&sm->smt_source),0) ;
+					if (!is_equal(&smc->mib.m[MAC0].
+					    fddiMACUpstreamNbr,&SMT_Unknown)){
+					 /* Do not update unknown address */
+					 smc->mib.m[MAC0].fddiMACOldUpstreamNbr=
+					 smc->mib.m[MAC0].fddiMACUpstreamNbr ;
+					}
+
+					smc->mib.m[MAC0].fddiMACUpstreamNbr =
+						sm->smt_source ;
+					smt_srf_event(smc,
+						SMT_EVENT_MAC_NEIGHBOR_CHANGE,
+						INDEX_MAC,0) ;
+					smt_echo_test(smc,0) ;
+				}
+				smc->sm.smt_tvu = smt_get_time() ;
+				st = (struct smt_p_state *)
+					sm_to_para(smc,sm,SMT_P_STATE) ;
+				if (st) {
+					smc->mib.m[MAC0].fddiMACUNDA_Flag =
+					(st->st_dupl_addr & SMT_ST_MY_DUPA) ?
+					TRUE : FALSE ;
+					update_dac(smc,1) ;
+				}
+			}
+			if ((sm->smt_type == SMT_REQUEST) &&
+			    is_individual(&sm->smt_source) &&
+			    ((!(fs & A_INDICATOR) && m_fc(mb) == FC_SMT_NSA) ||
+			     (m_fc(mb) != FC_SMT_NSA))) {
+				DB_SMT("SMT : replying to NIF request %s\n",
+					addr_to_string(&sm->smt_source),0) ;
+				smt_send_nif(smc,&sm->smt_source,
+					FC_SMT_INFO,
+					sm->smt_tid,
+					SMT_REPLY,local) ;
+			}
+			break ;
+		case SMT_REPLY :
+			DB_SMT("SMT : received NIF response from %s\n",
+				addr_to_string(&sm->smt_source),0) ;
+			if (fs & A_INDICATOR) {
+				smc->sm.pend[SMT_TID_NIF] = 0 ;
+				DB_SMT("SMT : duplicate address\n",0,0) ;
+				smc->mib.m[MAC0].fddiMACDupAddressTest =
+					DA_FAILED ;
+				smc->r.dup_addr_test = DA_FAILED ;
+				queue_event(smc,EVENT_RMT,RM_DUP_ADDR) ;
+				smc->mib.m[MAC0].fddiMACDA_Flag = TRUE ;
+				update_dac(smc,1) ;
+				break ;
+			}
+			if (sm->smt_tid == smc->sm.pend[SMT_TID_NIF]) {
+				smc->sm.pend[SMT_TID_NIF] = 0 ;
+				/* set my DNA */
+				if (!is_equal(
+					&smc->mib.m[MAC0].fddiMACDownstreamNbr,
+					&sm->smt_source)) {
+					DB_SMT("SMT : updated my DNA\n",0,0) ;
+					if (!is_equal(&smc->mib.m[MAC0].
+					 fddiMACDownstreamNbr, &SMT_Unknown)){
+					 /* Do not update unknown address */
+				smc->mib.m[MAC0].fddiMACOldDownstreamNbr =
+					 smc->mib.m[MAC0].fddiMACDownstreamNbr ;
+					}
+
+					smc->mib.m[MAC0].fddiMACDownstreamNbr =
+						sm->smt_source ;
+					smt_srf_event(smc,
+						SMT_EVENT_MAC_NEIGHBOR_CHANGE,
+						INDEX_MAC,0) ;
+					smt_echo_test(smc,1) ;
+				}
+				smc->mib.m[MAC0].fddiMACDA_Flag = FALSE ;
+				update_dac(smc,1) ;
+				smc->sm.smt_tvd = smt_get_time() ;
+				smc->mib.m[MAC0].fddiMACDupAddressTest =
+					DA_PASSED ;
+				if (smc->r.dup_addr_test != DA_PASSED) {
+					smc->r.dup_addr_test = DA_PASSED ;
+					queue_event(smc,EVENT_RMT,RM_DUP_ADDR) ;
+				}
+			}
+			else if (sm->smt_tid ==
+				smc->sm.pend[SMT_TID_NIF_TEST]) {
+				DB_SMT("SMT : NIF test TID ok\n",0,0) ;
+			}
+			else {
+				DB_SMT("SMT : expected TID %lx, got %lx\n",
+				smc->sm.pend[SMT_TID_NIF],sm->smt_tid) ;
+			}
+			break ;
+		default :
+			illegal = 2 ;
+			break ;
+		}
+		break ;
+	case SMT_SIF_CONFIG :	/* station information */
+		if (sm->smt_type != SMT_REQUEST)
+			break ;
+		DB_SMT("SMT : replying to SIF Config request from %s\n",
+			addr_to_string(&sm->smt_source),0) ;
+		smt_send_sif_config(smc,&sm->smt_source,sm->smt_tid,local) ;
+		break ;
+	case SMT_SIF_OPER :	/* station information */
+		if (sm->smt_type != SMT_REQUEST)
+			break ;
+		DB_SMT("SMT : replying to SIF Operation request from %s\n",
+			addr_to_string(&sm->smt_source),0) ;
+		smt_send_sif_operation(smc,&sm->smt_source,sm->smt_tid,local) ;
+		break ;
+	case SMT_ECF :		/* echo frame */
+		switch (sm->smt_type) {
+		case SMT_REPLY :
+			smc->mib.priv.fddiPRIVECF_Reply_Rx++ ;
+			DB_SMT("SMT: received ECF reply from %s\n",
+				addr_to_string(&sm->smt_source),0) ;
+			if (sm_to_para(smc,sm,SMT_P_ECHODATA) == NULL) {
+				DB_SMT("SMT: ECHODATA missing\n",0,0) ;
+				break ;
+			}
+			if (sm->smt_tid == smc->sm.pend[SMT_TID_ECF]) {
+				DB_SMT("SMT : ECF test TID ok\n",0,0) ;
+			}
+			else if (sm->smt_tid == smc->sm.pend[SMT_TID_ECF_UNA]) {
+				DB_SMT("SMT : ECF test UNA ok\n",0,0) ;
+			}
+			else if (sm->smt_tid == smc->sm.pend[SMT_TID_ECF_DNA]) {
+				DB_SMT("SMT : ECF test DNA ok\n",0,0) ;
+			}
+			else {
+				DB_SMT("SMT : expected TID %lx, got %lx\n",
+					smc->sm.pend[SMT_TID_ECF],
+					sm->smt_tid) ;
+			}
+			break ;
+		case SMT_REQUEST :
+			smc->mib.priv.fddiPRIVECF_Req_Rx++ ;
+			{
+			if (sm->smt_len && !sm_to_para(smc,sm,SMT_P_ECHODATA)) {
+			DB_SMT("SMT: ECF with para problem,sending RDF\n",0,0) ;
+				smt_send_rdf(smc,mb,m_fc(mb),SMT_RDF_LENGTH,
+					local) ;
+				break ;
+			}
+			DB_SMT("SMT - sending ECF reply to %s\n",
+				addr_to_string(&sm->smt_source),0) ;
+
+			/* set destination addr.  & reply */
+			sm->smt_dest = sm->smt_source ;
+			sm->smt_type = SMT_REPLY ;
+			dump_smt(smc,sm,"ECF REPLY") ;
+			smc->mib.priv.fddiPRIVECF_Reply_Tx++ ;
+			smt_send_frame(smc,mb,FC_SMT_INFO,local) ;
+			return ;		/* DON'T free mbuf */
+			}
+		default :
+			illegal = 1 ;
+			break ;
+		}
+		break ;
+#ifndef	BOOT
+	case SMT_RAF :		/* resource allocation */
+#ifdef	ESS
+		DB_ESSN(2,"ESS: RAF frame received\n",0,0) ;
+		fs = ess_raf_received_pack(smc,mb,sm,fs) ;
+#endif
+
+#ifdef	SBA
+		DB_SBAN(2,"SBA: RAF frame received\n",0,0) ;
+		sba_raf_received_pack(smc,sm,fs) ;
+#endif
+		break ;
+	case SMT_RDF :		/* request denied */
+		smc->mib.priv.fddiPRIVRDF_Rx++ ;
+		break ;
+	case SMT_ESF :		/* extended service - not supported */
+		if (sm->smt_type == SMT_REQUEST) {
+			DB_SMT("SMT - received ESF, sending RDF\n",0,0) ;
+			smt_send_rdf(smc,mb,m_fc(mb),SMT_RDF_CLASS,local) ;
+		}
+		break ;
+	case SMT_PMF_GET :
+	case SMT_PMF_SET :
+		if (sm->smt_type != SMT_REQUEST)
+			break ;
+		/* update statistics */
+		if (sm->smt_class == SMT_PMF_GET)
+			smc->mib.priv.fddiPRIVPMF_Get_Rx++ ;
+		else
+			smc->mib.priv.fddiPRIVPMF_Set_Rx++ ;
+		/*
+		 * ignore PMF SET with I/G set
+		 */
+		if ((sm->smt_class == SMT_PMF_SET) &&
+			!is_individual(&sm->smt_dest)) {
+			DB_SMT("SMT: ignoring PMF-SET with I/G set\n",0,0) ;
+			break ;
+		}
+		smt_pmf_received_pack(smc,mb, local) ;
+		break ;
+	case SMT_SRF :
+		dump_smt(smc,sm,"SRF received") ;
+		break ;
+	default :
+		if (sm->smt_type != SMT_REQUEST)
+			break ;
+		/*
+		 * For frames with unknown class:
+		 * we need to send a RDF frame according to 8.1.3.1.1,
+		 * only if it is a REQUEST.
+		 */
+		DB_SMT("SMT : class = %d, send RDF to %s\n",
+			sm->smt_class, addr_to_string(&sm->smt_source)) ;
+
+		smt_send_rdf(smc,mb,m_fc(mb),SMT_RDF_CLASS,local) ;
+		break ;
+#endif
+	}
+	if (illegal) {
+		DB_SMT("SMT: discarding invalid frame, reason = %d\n",
+			illegal,0) ;
+	}
+	smt_free_mbuf(smc,mb) ;
+}
+
+static void update_dac(struct s_smc *smc, int report)
+{
+	int	cond ;
+
+	cond = ( smc->mib.m[MAC0].fddiMACUNDA_Flag |
+		smc->mib.m[MAC0].fddiMACDA_Flag) != 0 ;
+	if (report && (cond != smc->mib.m[MAC0].fddiMACDuplicateAddressCond))
+		smt_srf_event(smc, SMT_COND_MAC_DUP_ADDR,INDEX_MAC,cond) ;
+	else
+		smc->mib.m[MAC0].fddiMACDuplicateAddressCond = cond ;
+}
+
+/*
+ * send SMT frame
+ *	set source address
+ *	set station ID
+ *	send frame
+ */
+void smt_send_frame(struct s_smc *smc, SMbuf *mb, int fc, int local)
+/* SMbuf *mb;	buffer to send */
+/* int fc;	FC value */
+{
+	struct smt_header	*sm ;
+
+	if (!smc->r.sm_ma_avail && !local) {
+		smt_free_mbuf(smc,mb) ;
+		return ;
+	}
+	sm = smtod(mb,struct smt_header *) ;
+	sm->smt_source = smc->mib.m[MAC0].fddiMACSMTAddress ;
+	sm->smt_sid = smc->mib.fddiSMTStationId ;
+
+	smt_swap_para(sm,(int) mb->sm_len,0) ;		/* swap para & header */
+	hwm_conv_can(smc,(char *)sm,12) ;		/* convert SA and DA */
+	smc->mib.m[MAC0].fddiMACSMTTransmit_Ct++ ;
+	smt_send_mbuf(smc,mb,local ? FC_SMT_LOC : fc) ;
+}
+
+/*
+ * generate and send RDF
+ */
+static void smt_send_rdf(struct s_smc *smc, SMbuf *rej, int fc, int reason,
+			 int local)
+/* SMbuf *rej;	mbuf of offending frame */
+/* int fc;	FC of denied frame */
+/* int reason;	reason code */
+{
+	SMbuf	*mb ;
+	struct smt_header	*sm ;	/* header of offending frame */
+	struct smt_rdf	*rdf ;
+	int		len ;
+	int		frame_len ;
+
+	sm = smtod(rej,struct smt_header *) ;
+	if (sm->smt_type != SMT_REQUEST)
+		return ;
+
+	DB_SMT("SMT: sending RDF to %s,reason = 0x%x\n",
+		addr_to_string(&sm->smt_source),reason) ;
+
+
+	/*
+	 * note: get framelength from MAC length, NOT from SMT header
+	 * smt header length is included in sm_len
+	 */
+	frame_len = rej->sm_len ;
+
+	if (!(mb=smt_build_frame(smc,SMT_RDF,SMT_REPLY,sizeof(struct smt_rdf))))
+		return ;
+	rdf = smtod(mb,struct smt_rdf *) ;
+	rdf->smt.smt_tid = sm->smt_tid ;		/* use TID from sm */
+	rdf->smt.smt_dest = sm->smt_source ;		/* set dest = source */
+
+	/* set P12 */
+	rdf->reason.para.p_type = SMT_P_REASON ;
+	rdf->reason.para.p_len = sizeof(struct smt_p_reason) - PARA_LEN ;
+	rdf->reason.rdf_reason = reason ;
+
+	/* set P14 */
+	rdf->version.para.p_type = SMT_P_VERSION ;
+	rdf->version.para.p_len = sizeof(struct smt_p_version) - PARA_LEN ;
+	rdf->version.v_pad = 0 ;
+	rdf->version.v_n = 1 ;
+	rdf->version.v_index = 1 ;
+	rdf->version.v_version[0] = SMT_VID_2 ;
+	rdf->version.v_pad2 = 0 ;
+
+	/* set P13 */
+	if ((unsigned) frame_len <= SMT_MAX_INFO_LEN - sizeof(*rdf) +
+		2*sizeof(struct smt_header))
+		len = frame_len ;
+	else
+		len = SMT_MAX_INFO_LEN - sizeof(*rdf) +
+			2*sizeof(struct smt_header) ;
+	/* make length multiple of 4 */
+	len &= ~3 ;
+	rdf->refused.para.p_type = SMT_P_REFUSED ;
+	/* length of para is smt_frame + ref_fc */
+	rdf->refused.para.p_len = len + 4 ;
+	rdf->refused.ref_fc = fc ;
+
+	/* swap it back */
+	smt_swap_para(sm,frame_len,0) ;
+
+	memcpy((char *) &rdf->refused.ref_header,(char *) sm,len) ;
+
+	len -= sizeof(struct smt_header) ;
+	mb->sm_len += len ;
+	rdf->smt.smt_len += len ;
+
+	dump_smt(smc,(struct smt_header *)rdf,"RDF") ;
+	smc->mib.priv.fddiPRIVRDF_Tx++ ;
+	smt_send_frame(smc,mb,FC_SMT_INFO,local) ;
+}
+
+/*
+ * generate and send NIF
+ */
+static void smt_send_nif(struct s_smc *smc, const struct fddi_addr *dest, 
+			 int fc, u_long tid, int type, int local)
+/* struct fddi_addr *dest;	dest address */
+/* int fc;			frame control */
+/* u_long tid;			transaction id */
+/* int type;			frame type */
+{
+	struct smt_nif	*nif ;
+	SMbuf		*mb ;
+
+	if (!(mb = smt_build_frame(smc,SMT_NIF,type,sizeof(struct smt_nif))))
+		return ;
+	nif = smtod(mb, struct smt_nif *) ;
+	smt_fill_una(smc,&nif->una) ;	/* set UNA */
+	smt_fill_sde(smc,&nif->sde) ;	/* set station descriptor */
+	smt_fill_state(smc,&nif->state) ;	/* set state information */
+#ifdef	SMT6_10
+	smt_fill_fsc(smc,&nif->fsc) ;	/* set frame status cap. */
+#endif
+	nif->smt.smt_dest = *dest ;	/* destination address */
+	nif->smt.smt_tid = tid ;	/* transaction ID */
+	dump_smt(smc,(struct smt_header *)nif,"NIF") ;
+	smt_send_frame(smc,mb,fc,local) ;
+}
+
+#ifdef	DEBUG
+/*
+ * send NIF request (test purpose)
+ */
+static void smt_send_nif_request(struct s_smc *smc, struct fddi_addr *dest)
+{
+	smc->sm.pend[SMT_TID_NIF_TEST] = smt_get_tid(smc) ;
+	smt_send_nif(smc,dest, FC_SMT_INFO, smc->sm.pend[SMT_TID_NIF_TEST],
+		SMT_REQUEST,0) ;
+}
+
+/*
+ * send ECF request (test purpose)
+ */
+static void smt_send_ecf_request(struct s_smc *smc, struct fddi_addr *dest,
+				 int len)
+{
+	smc->sm.pend[SMT_TID_ECF] = smt_get_tid(smc) ;
+	smt_send_ecf(smc,dest, FC_SMT_INFO, smc->sm.pend[SMT_TID_ECF],
+		SMT_REQUEST,len) ;
+}
+#endif
+
+/*
+ * echo test
+ */
+static void smt_echo_test(struct s_smc *smc, int dna)
+{
+	u_long	tid ;
+
+	smc->sm.pend[dna ? SMT_TID_ECF_DNA : SMT_TID_ECF_UNA] =
+		tid = smt_get_tid(smc) ;
+	smt_send_ecf(smc, dna ?
+		&smc->mib.m[MAC0].fddiMACDownstreamNbr :
+		&smc->mib.m[MAC0].fddiMACUpstreamNbr,
+		FC_SMT_INFO,tid, SMT_REQUEST, (SMT_TEST_ECHO_LEN & ~3)-8) ;
+}
+
+/*
+ * generate and send ECF
+ */
+static void smt_send_ecf(struct s_smc *smc, struct fddi_addr *dest, int fc,
+			 u_long tid, int type, int len)
+/* struct fddi_addr *dest;	dest address */
+/* int fc;			frame control */
+/* u_long tid;			transaction id */
+/* int type;			frame type */
+/* int len;			frame length */
+{
+	struct smt_ecf	*ecf ;
+	SMbuf		*mb ;
+
+	if (!(mb = smt_build_frame(smc,SMT_ECF,type,SMT_ECF_LEN + len)))
+		return ;
+	ecf = smtod(mb, struct smt_ecf *) ;
+
+	smt_fill_echo(smc,&ecf->ec_echo,tid,len) ;	/* set ECHO */
+	ecf->smt.smt_dest = *dest ;	/* destination address */
+	ecf->smt.smt_tid = tid ;	/* transaction ID */
+	smc->mib.priv.fddiPRIVECF_Req_Tx++ ;
+	smt_send_frame(smc,mb,fc,0) ;
+}
+
+/*
+ * generate and send SIF config response
+ */
+
+static void smt_send_sif_config(struct s_smc *smc, struct fddi_addr *dest,
+				u_long tid, int local)
+/* struct fddi_addr *dest;	dest address */
+/* u_long tid;			transaction id */
+{
+	struct smt_sif_config	*sif ;
+	SMbuf			*mb ;
+	int			len ;
+	if (!(mb = smt_build_frame(smc,SMT_SIF_CONFIG,SMT_REPLY,
+		SIZEOF_SMT_SIF_CONFIG)))
+		return ;
+
+	sif = smtod(mb, struct smt_sif_config *) ;
+	smt_fill_timestamp(smc,&sif->ts) ;	/* set time stamp */
+	smt_fill_sde(smc,&sif->sde) ;		/* set station descriptor */
+	smt_fill_version(smc,&sif->version) ;	/* set version information */
+	smt_fill_state(smc,&sif->state) ;	/* set state information */
+	smt_fill_policy(smc,&sif->policy) ;	/* set station policy */
+	smt_fill_latency(smc,&sif->latency);	/* set station latency */
+	smt_fill_neighbor(smc,&sif->neighbor);	/* set station neighbor */
+	smt_fill_setcount(smc,&sif->setcount) ;	/* set count */
+	len = smt_fill_path(smc,&sif->path);	/* set station path descriptor*/
+	sif->smt.smt_dest = *dest ;		/* destination address */
+	sif->smt.smt_tid = tid ;		/* transaction ID */
+	smt_add_frame_len(mb,len) ;		/* adjust length fields */
+	dump_smt(smc,(struct smt_header *)sif,"SIF Configuration Reply") ;
+	smt_send_frame(smc,mb,FC_SMT_INFO,local) ;
+}
+
+/*
+ * generate and send SIF operation response
+ */
+
+static void smt_send_sif_operation(struct s_smc *smc, struct fddi_addr *dest,
+				   u_long tid, int local)
+/* struct fddi_addr *dest;	dest address */
+/* u_long tid;			transaction id */
+{
+	struct smt_sif_operation *sif ;
+	SMbuf			*mb ;
+	int			ports ;
+	int			i ;
+
+	ports = NUMPHYS ;
+#ifndef	CONCENTRATOR
+	if (smc->s.sas == SMT_SAS)
+		ports = 1 ;
+#endif
+
+	if (!(mb = smt_build_frame(smc,SMT_SIF_OPER,SMT_REPLY,
+		SIZEOF_SMT_SIF_OPERATION+ports*sizeof(struct smt_p_lem))))
+		return ;
+	sif = smtod(mb, struct smt_sif_operation *) ;
+	smt_fill_timestamp(smc,&sif->ts) ;	/* set time stamp */
+	smt_fill_mac_status(smc,&sif->status) ; /* set mac status */
+	smt_fill_mac_counter(smc,&sif->mc) ; /* set mac counter field */
+	smt_fill_mac_fnc(smc,&sif->fnc) ; /* set frame not copied counter */
+	smt_fill_manufacturer(smc,&sif->man) ; /* set manufacturer field */
+	smt_fill_user(smc,&sif->user) ;		/* set user field */
+	smt_fill_setcount(smc,&sif->setcount) ;	/* set count */
+	/*
+	 * set link error mon information
+	 */
+	if (ports == 1) {
+		smt_fill_lem(smc,sif->lem,PS) ;
+	}
+	else {
+		for (i = 0 ; i < ports ; i++) {
+			smt_fill_lem(smc,&sif->lem[i],i) ;
+		}
+	}
+
+	sif->smt.smt_dest = *dest ;	/* destination address */
+	sif->smt.smt_tid = tid ;	/* transaction ID */
+	dump_smt(smc,(struct smt_header *)sif,"SIF Operation Reply") ;
+	smt_send_frame(smc,mb,FC_SMT_INFO,local) ;
+}
+
+/*
+ * get and initialize SMT frame
+ */
+SMbuf *smt_build_frame(struct s_smc *smc, int class, int type,
+				  int length)
+{
+	SMbuf			*mb ;
+	struct smt_header	*smt ;
+
+#if	0
+	if (!smc->r.sm_ma_avail) {
+		return 0;
+	}
+#endif
+	if (!(mb = smt_get_mbuf(smc)))
+		return mb;
+
+	mb->sm_len = length ;
+	smt = smtod(mb, struct smt_header *) ;
+	smt->smt_dest = fddi_broadcast ; /* set dest = broadcast */
+	smt->smt_class = class ;
+	smt->smt_type = type ;
+	switch (class) {
+	case SMT_NIF :
+	case SMT_SIF_CONFIG :
+	case SMT_SIF_OPER :
+	case SMT_ECF :
+		smt->smt_version = SMT_VID ;
+		break ;
+	default :
+		smt->smt_version = SMT_VID_2 ;
+		break ;
+	}
+	smt->smt_tid = smt_get_tid(smc) ;	/* set transaction ID */
+	smt->smt_pad = 0 ;
+	smt->smt_len = length - sizeof(struct smt_header) ;
+	return mb;
+}
+
+static void smt_add_frame_len(SMbuf *mb, int len)
+{
+	struct smt_header	*smt ;
+
+	smt = smtod(mb, struct smt_header *) ;
+	smt->smt_len += len ;
+	mb->sm_len += len ;
+}
+
+
+
+/*
+ * fill values in UNA parameter
+ */
+static void smt_fill_una(struct s_smc *smc, struct smt_p_una *una)
+{
+	SMTSETPARA(una,SMT_P_UNA) ;
+	una->una_pad = 0 ;
+	una->una_node = smc->mib.m[MAC0].fddiMACUpstreamNbr ;
+}
+
+/*
+ * fill values in SDE parameter
+ */
+static void smt_fill_sde(struct s_smc *smc, struct smt_p_sde *sde)
+{
+	SMTSETPARA(sde,SMT_P_SDE) ;
+	sde->sde_non_master = smc->mib.fddiSMTNonMaster_Ct ;
+	sde->sde_master = smc->mib.fddiSMTMaster_Ct ;
+	sde->sde_mac_count = NUMMACS ;		/* only 1 MAC */
+#ifdef	CONCENTRATOR
+	sde->sde_type = SMT_SDE_CONCENTRATOR ;
+#else
+	sde->sde_type = SMT_SDE_STATION ;
+#endif
+}
+
+/*
+ * fill in values in station state parameter
+ */
+static void smt_fill_state(struct s_smc *smc, struct smt_p_state *state)
+{
+	int	top ;
+	int	twist ;
+
+	SMTSETPARA(state,SMT_P_STATE) ;
+	state->st_pad = 0 ;
+
+	/* determine topology */
+	top = 0 ;
+	if (smc->mib.fddiSMTPeerWrapFlag) {
+		top |= SMT_ST_WRAPPED ;		/* state wrapped */
+	}
+#ifdef	CONCENTRATOR
+	if (cfm_status_unattached(smc)) {
+		top |= SMT_ST_UNATTACHED ;	/* unattached concentrator */
+	}
+#endif
+	if ((twist = pcm_status_twisted(smc)) & 1) {
+		top |= SMT_ST_TWISTED_A ;	/* twisted cable */
+	}
+	if (twist & 2) {
+		top |= SMT_ST_TWISTED_B ;	/* twisted cable */
+	}
+#ifdef	OPT_SRF
+	top |= SMT_ST_SRF ;
+#endif
+	if (pcm_rooted_station(smc))
+		top |= SMT_ST_ROOTED_S ;
+	if (smc->mib.a[0].fddiPATHSbaPayload != 0)
+		top |= SMT_ST_SYNC_SERVICE ;
+	state->st_topology = top ;
+	state->st_dupl_addr =
+		((smc->mib.m[MAC0].fddiMACDA_Flag ? SMT_ST_MY_DUPA : 0 ) |
+		 (smc->mib.m[MAC0].fddiMACUNDA_Flag ? SMT_ST_UNA_DUPA : 0)) ;
+}
+
+/*
+ * fill values in timestamp parameter
+ */
+static void smt_fill_timestamp(struct s_smc *smc, struct smt_p_timestamp *ts)
+{
+
+	SMTSETPARA(ts,SMT_P_TIMESTAMP) ;
+	smt_set_timestamp(smc,ts->ts_time) ;
+}
+
+void smt_set_timestamp(struct s_smc *smc, u_char *p)
+{
+	u_long	time ;
+	u_long	utime ;
+
+	/*
+	 * timestamp is 64 bits long ; resolution is 80 nS
+	 * our clock resolution is 10mS
+	 * 10mS/80ns = 125000 ~ 2^17 = 131072
+	 */
+	utime = smt_get_time() ;
+	time = utime * 100 ;
+	time /= TICKS_PER_SECOND ;
+	p[0] = 0 ;
+	p[1] = (u_char)((time>>(8+8+8+8-1)) & 1) ;
+	p[2] = (u_char)(time>>(8+8+8-1)) ;
+	p[3] = (u_char)(time>>(8+8-1)) ;
+	p[4] = (u_char)(time>>(8-1)) ;
+	p[5] = (u_char)(time<<1) ;
+	p[6] = (u_char)(smc->sm.uniq_ticks>>8) ;
+	p[7] = (u_char)smc->sm.uniq_ticks ;
+	/*
+	 * make sure we don't wrap: restart whenever the upper digits change
+	 */
+	if (utime != smc->sm.uniq_time) {
+		smc->sm.uniq_ticks = 0 ;
+	}
+	smc->sm.uniq_ticks++ ;
+	smc->sm.uniq_time = utime ;
+}
+
+/*
+ * fill values in station policy parameter
+ */
+static void smt_fill_policy(struct s_smc *smc, struct smt_p_policy *policy)
+{
+	int	i ;
+	const u_char *map ;
+	u_short	in ;
+	u_short	out ;
+
+	/*
+	 * MIB para 101b (fddiSMTConnectionPolicy) coding
+	 * is different from 0005 coding
+	 */
+	static const u_char ansi_weirdness[16] = {
+		0,7,5,3,8,1,6,4,9,10,2,11,12,13,14,15
+	} ;
+	SMTSETPARA(policy,SMT_P_POLICY) ;
+
+	out = 0 ;
+	in = smc->mib.fddiSMTConnectionPolicy ;
+	for (i = 0, map = ansi_weirdness ; i < 16 ; i++) {
+		if (in & 1)
+			out |= (1<<*map) ;
+		in >>= 1 ;
+		map++ ;
+	}
+	policy->pl_config = smc->mib.fddiSMTConfigPolicy ;
+	policy->pl_connect = out ;
+}
+
+/*
+ * fill values in latency equivalent parameter
+ */
+static void smt_fill_latency(struct s_smc *smc, struct smt_p_latency *latency)
+{
+	SMTSETPARA(latency,SMT_P_LATENCY) ;
+
+	latency->lt_phyout_idx1 = phy_index(smc,0) ;
+	latency->lt_latency1 = 10 ;	/* in octets (byte clock) */
+	/*
+	 * note: latency has two phy entries by definition
+	 * for a SAS, the 2nd one is null
+	 */
+	if (smc->s.sas == SMT_DAS) {
+		latency->lt_phyout_idx2 = phy_index(smc,1) ;
+		latency->lt_latency2 = 10 ;	/* in octets (byte clock) */
+	}
+	else {
+		latency->lt_phyout_idx2 = 0 ;
+		latency->lt_latency2 = 0 ;
+	}
+}
+
+/*
+ * fill values in MAC neighbors parameter
+ */
+static void smt_fill_neighbor(struct s_smc *smc, struct smt_p_neighbor *neighbor)
+{
+	SMTSETPARA(neighbor,SMT_P_NEIGHBORS) ;
+
+	neighbor->nb_mib_index = INDEX_MAC ;
+	neighbor->nb_mac_index = mac_index(smc,1) ;
+	neighbor->nb_una = smc->mib.m[MAC0].fddiMACUpstreamNbr ;
+	neighbor->nb_dna = smc->mib.m[MAC0].fddiMACDownstreamNbr ;
+}
+
+/*
+ * fill values in path descriptor
+ */
+#ifdef	CONCENTRATOR
+#define ALLPHYS	NUMPHYS
+#else
+#define ALLPHYS	((smc->s.sas == SMT_SAS) ? 1 : 2)
+#endif
+
+static int smt_fill_path(struct s_smc *smc, struct smt_p_path *path)
+{
+	SK_LOC_DECL(int,type) ;
+	SK_LOC_DECL(int,state) ;
+	SK_LOC_DECL(int,remote) ;
+	SK_LOC_DECL(int,mac) ;
+	int	len ;
+	int	p ;
+	int	physp ;
+	struct smt_phy_rec	*phy ;
+	struct smt_mac_rec	*pd_mac ;
+
+	len =	PARA_LEN +
+		sizeof(struct smt_mac_rec) * NUMMACS +
+		sizeof(struct smt_phy_rec) * ALLPHYS ;
+	path->para.p_type = SMT_P_PATH ;
+	path->para.p_len = len - PARA_LEN ;
+
+	/* PHYs */
+	for (p = 0,phy = path->pd_phy ; p < ALLPHYS ; p++, phy++) {
+		physp = p ;
+#ifndef	CONCENTRATOR
+		if (smc->s.sas == SMT_SAS)
+			physp = PS ;
+#endif
+		pcm_status_state(smc,physp,&type,&state,&remote,&mac) ;
+#ifdef	LITTLE_ENDIAN
+		phy->phy_mib_index = smt_swap_short((u_short)p+INDEX_PORT) ;
+#else
+		phy->phy_mib_index = p+INDEX_PORT ;
+#endif
+		phy->phy_type = type ;
+		phy->phy_connect_state = state ;
+		phy->phy_remote_type = remote ;
+		phy->phy_remote_mac = mac ;
+		phy->phy_resource_idx = phy_con_resource_index(smc,p) ;
+	}
+
+	/* MAC */
+	pd_mac = (struct smt_mac_rec *) phy ;
+	pd_mac->mac_addr = smc->mib.m[MAC0].fddiMACSMTAddress ;
+	pd_mac->mac_resource_idx = mac_con_resource_index(smc,1) ;
+	return len;
+}
+
+/*
+ * fill values in mac status
+ */
+static void smt_fill_mac_status(struct s_smc *smc, struct smt_p_mac_status *st)
+{
+	SMTSETPARA(st,SMT_P_MAC_STATUS) ;
+
+	st->st_mib_index = INDEX_MAC ;
+	st->st_mac_index = mac_index(smc,1) ;
+
+	mac_update_counter(smc) ;
+	/*
+	 * timer values are represented in SMT as 2's complement numbers
+	 * units :	internal :  2's complement BCLK
+	 */
+	st->st_t_req = smc->mib.m[MAC0].fddiMACT_Req ;
+	st->st_t_neg = smc->mib.m[MAC0].fddiMACT_Neg ;
+	st->st_t_max = smc->mib.m[MAC0].fddiMACT_Max ;
+	st->st_tvx_value = smc->mib.m[MAC0].fddiMACTvxValue ;
+	st->st_t_min = smc->mib.m[MAC0].fddiMACT_Min ;
+
+	st->st_sba = smc->mib.a[PATH0].fddiPATHSbaPayload ;
+	st->st_frame_ct = smc->mib.m[MAC0].fddiMACFrame_Ct ;
+	st->st_error_ct = smc->mib.m[MAC0].fddiMACError_Ct ;
+	st->st_lost_ct = smc->mib.m[MAC0].fddiMACLost_Ct ;
+}
+
+/*
+ * fill values in LEM status
+ */
+static void smt_fill_lem(struct s_smc *smc, struct smt_p_lem *lem, int phy)
+{
+	struct fddi_mib_p	*mib ;
+
+	mib = smc->y[phy].mib ;
+
+	SMTSETPARA(lem,SMT_P_LEM) ;
+	lem->lem_mib_index = phy+INDEX_PORT ;
+	lem->lem_phy_index = phy_index(smc,phy) ;
+	lem->lem_pad2 = 0 ;
+	lem->lem_cutoff = mib->fddiPORTLer_Cutoff ;
+	lem->lem_alarm = mib->fddiPORTLer_Alarm ;
+	/* long term bit error rate */
+	lem->lem_estimate = mib->fddiPORTLer_Estimate ;
+	/* # of rejected connections */
+	lem->lem_reject_ct = mib->fddiPORTLem_Reject_Ct ;
+	lem->lem_ct = mib->fddiPORTLem_Ct ;	/* total number of errors */
+}
+
+/*
+ * fill version parameter
+ */
+static void smt_fill_version(struct s_smc *smc, struct smt_p_version *vers)
+{
+	SK_UNUSED(smc) ;
+	SMTSETPARA(vers,SMT_P_VERSION) ;
+	vers->v_pad = 0 ;
+	vers->v_n = 1 ;				/* one version is enough .. */
+	vers->v_index = 1 ;
+	vers->v_version[0] = SMT_VID_2 ;
+	vers->v_pad2 = 0 ;
+}
+
+#ifdef	SMT6_10
+/*
+ * fill frame status capabilities
+ */
+/*
+ * note: this para 200B is NOT in swap table, because it's also set in
+ * PMF add_para
+ */
+static void smt_fill_fsc(struct s_smc *smc, struct smt_p_fsc *fsc)
+{
+	SK_UNUSED(smc) ;
+	SMTSETPARA(fsc,SMT_P_FSC) ;
+	fsc->fsc_pad0 = 0 ;
+	fsc->fsc_mac_index = INDEX_MAC ;	/* this is MIB ; MIB is NOT
+						 * mac_index ()i !
+						 */
+	fsc->fsc_pad1 = 0 ;
+	fsc->fsc_value = FSC_TYPE0 ;		/* "normal" node */
+#ifdef	LITTLE_ENDIAN
+	fsc->fsc_mac_index = smt_swap_short(INDEX_MAC) ;
+	fsc->fsc_value = smt_swap_short(FSC_TYPE0) ;
+#endif
+}
+#endif
+
+/*
+ * fill mac counter field
+ */
+static void smt_fill_mac_counter(struct s_smc *smc, struct smt_p_mac_counter *mc)
+{
+	SMTSETPARA(mc,SMT_P_MAC_COUNTER) ;
+	mc->mc_mib_index = INDEX_MAC ;
+	mc->mc_index = mac_index(smc,1) ;
+	mc->mc_receive_ct = smc->mib.m[MAC0].fddiMACCopied_Ct ;
+	mc->mc_transmit_ct =  smc->mib.m[MAC0].fddiMACTransmit_Ct ;
+}
+
+/*
+ * fill mac frame not copied counter
+ */
+static void smt_fill_mac_fnc(struct s_smc *smc, struct smt_p_mac_fnc *fnc)
+{
+	SMTSETPARA(fnc,SMT_P_MAC_FNC) ;
+	fnc->nc_mib_index = INDEX_MAC ;
+	fnc->nc_index = mac_index(smc,1) ;
+	fnc->nc_counter = smc->mib.m[MAC0].fddiMACNotCopied_Ct ;
+}
+
+
+/*
+ * fill manufacturer field
+ */
+static void smt_fill_manufacturer(struct s_smc *smc, 
+				  struct smp_p_manufacturer *man)
+{
+	SMTSETPARA(man,SMT_P_MANUFACTURER) ;
+	memcpy((char *) man->mf_data,
+		(char *) smc->mib.fddiSMTManufacturerData,
+		sizeof(man->mf_data)) ;
+}
+
+/*
+ * fill user field
+ */
+static void smt_fill_user(struct s_smc *smc, struct smp_p_user *user)
+{
+	SMTSETPARA(user,SMT_P_USER) ;
+	memcpy((char *) user->us_data,
+		(char *) smc->mib.fddiSMTUserData,
+		sizeof(user->us_data)) ;
+}
+
+/*
+ * fill set count
+ */
+static void smt_fill_setcount(struct s_smc *smc, struct smt_p_setcount *setcount)
+{
+	SK_UNUSED(smc) ;
+	SMTSETPARA(setcount,SMT_P_SETCOUNT) ;
+	setcount->count = smc->mib.fddiSMTSetCount.count ;
+	memcpy((char *)setcount->timestamp,
+		(char *)smc->mib.fddiSMTSetCount.timestamp,8) ;
+}
+
+/*
+ * fill echo data
+ */
+static void smt_fill_echo(struct s_smc *smc, struct smt_p_echo *echo, u_long seed,
+			  int len)
+{
+	u_char	*p ;
+
+	SK_UNUSED(smc) ;
+	SMTSETPARA(echo,SMT_P_ECHODATA) ;
+	echo->para.p_len = len ;
+	for (p = echo->ec_data ; len ; len--) {
+		*p++ = (u_char) seed ;
+		seed += 13 ;
+	}
+}
+
+/*
+ * clear DNA and UNA
+ * called from CFM if configuration changes
+ */
+static void smt_clear_una_dna(struct s_smc *smc)
+{
+	smc->mib.m[MAC0].fddiMACUpstreamNbr = SMT_Unknown ;
+	smc->mib.m[MAC0].fddiMACDownstreamNbr = SMT_Unknown ;
+}
+
+static void smt_clear_old_una_dna(struct s_smc *smc)
+{
+	smc->mib.m[MAC0].fddiMACOldUpstreamNbr = SMT_Unknown ;
+	smc->mib.m[MAC0].fddiMACOldDownstreamNbr = SMT_Unknown ;
+}
+
+u_long smt_get_tid(struct s_smc *smc)
+{
+	u_long	tid ;
+	while ((tid = ++(smc->sm.smt_tid) ^ SMT_TID_MAGIC) == 0)
+		;
+	return tid & 0x3fffffffL;
+}
+
+
+/*
+ * table of parameter lengths
+ */
+static const struct smt_pdef {
+	int	ptype ;
+	int	plen ;
+	const char	*pswap ;
+} smt_pdef[] = {
+	{ SMT_P_UNA,	sizeof(struct smt_p_una) ,
+		SWAP_SMT_P_UNA					} ,
+	{ SMT_P_SDE,	sizeof(struct smt_p_sde) ,
+		SWAP_SMT_P_SDE					} ,
+	{ SMT_P_STATE,	sizeof(struct smt_p_state) ,
+		SWAP_SMT_P_STATE				} ,
+	{ SMT_P_TIMESTAMP,sizeof(struct smt_p_timestamp) ,
+		SWAP_SMT_P_TIMESTAMP				} ,
+	{ SMT_P_POLICY,	sizeof(struct smt_p_policy) ,
+		SWAP_SMT_P_POLICY				} ,
+	{ SMT_P_LATENCY,	sizeof(struct smt_p_latency) ,
+		SWAP_SMT_P_LATENCY				} ,
+	{ SMT_P_NEIGHBORS,sizeof(struct smt_p_neighbor) ,
+		SWAP_SMT_P_NEIGHBORS				} ,
+	{ SMT_P_PATH,	sizeof(struct smt_p_path) ,
+		SWAP_SMT_P_PATH					} ,
+	{ SMT_P_MAC_STATUS,sizeof(struct smt_p_mac_status) ,
+		SWAP_SMT_P_MAC_STATUS				} ,
+	{ SMT_P_LEM,	sizeof(struct smt_p_lem) ,
+		SWAP_SMT_P_LEM					} ,
+	{ SMT_P_MAC_COUNTER,sizeof(struct smt_p_mac_counter) ,
+		SWAP_SMT_P_MAC_COUNTER				} ,
+	{ SMT_P_MAC_FNC,sizeof(struct smt_p_mac_fnc) ,
+		SWAP_SMT_P_MAC_FNC				} ,
+	{ SMT_P_PRIORITY,sizeof(struct smt_p_priority) ,
+		SWAP_SMT_P_PRIORITY				} ,
+	{ SMT_P_EB,sizeof(struct smt_p_eb) ,
+		SWAP_SMT_P_EB					} ,
+	{ SMT_P_MANUFACTURER,sizeof(struct smp_p_manufacturer) ,
+		SWAP_SMT_P_MANUFACTURER				} ,
+	{ SMT_P_REASON,	sizeof(struct smt_p_reason) ,
+		SWAP_SMT_P_REASON				} ,
+	{ SMT_P_REFUSED, sizeof(struct smt_p_refused) ,
+		SWAP_SMT_P_REFUSED				} ,
+	{ SMT_P_VERSION, sizeof(struct smt_p_version) ,
+		SWAP_SMT_P_VERSION				} ,
+#ifdef ESS
+	{ SMT_P0015, sizeof(struct smt_p_0015) , SWAP_SMT_P0015 } ,
+	{ SMT_P0016, sizeof(struct smt_p_0016) , SWAP_SMT_P0016 } ,
+	{ SMT_P0017, sizeof(struct smt_p_0017) , SWAP_SMT_P0017 } ,
+	{ SMT_P0018, sizeof(struct smt_p_0018) , SWAP_SMT_P0018 } ,
+	{ SMT_P0019, sizeof(struct smt_p_0019) , SWAP_SMT_P0019 } ,
+	{ SMT_P001A, sizeof(struct smt_p_001a) , SWAP_SMT_P001A } ,
+	{ SMT_P001B, sizeof(struct smt_p_001b) , SWAP_SMT_P001B } ,
+	{ SMT_P001C, sizeof(struct smt_p_001c) , SWAP_SMT_P001C } ,
+	{ SMT_P001D, sizeof(struct smt_p_001d) , SWAP_SMT_P001D } ,
+#endif
+#if	0
+	{ SMT_P_FSC,	sizeof(struct smt_p_fsc) ,
+		SWAP_SMT_P_FSC					} ,
+#endif
+
+	{ SMT_P_SETCOUNT,0,	SWAP_SMT_P_SETCOUNT		} ,
+	{ SMT_P1048,	0,	SWAP_SMT_P1048			} ,
+	{ SMT_P208C,	0,	SWAP_SMT_P208C			} ,
+	{ SMT_P208D,	0,	SWAP_SMT_P208D			} ,
+	{ SMT_P208E,	0,	SWAP_SMT_P208E			} ,
+	{ SMT_P208F,	0,	SWAP_SMT_P208F			} ,
+	{ SMT_P2090,	0,	SWAP_SMT_P2090			} ,
+#ifdef	ESS
+	{ SMT_P320B, sizeof(struct smt_p_320b) , SWAP_SMT_P320B } ,
+	{ SMT_P320F, sizeof(struct smt_p_320f) , SWAP_SMT_P320F } ,
+	{ SMT_P3210, sizeof(struct smt_p_3210) , SWAP_SMT_P3210 } ,
+#endif
+	{ SMT_P4050,	0,	SWAP_SMT_P4050			} ,
+	{ SMT_P4051,	0,	SWAP_SMT_P4051			} ,
+	{ SMT_P4052,	0,	SWAP_SMT_P4052			} ,
+	{ SMT_P4053,	0,	SWAP_SMT_P4053			} ,
+} ;
+
+#define N_SMT_PLEN	ARRAY_SIZE(smt_pdef)
+
+int smt_check_para(struct s_smc *smc, struct smt_header	*sm,
+		   const u_short list[])
+{
+	const u_short		*p = list ;
+	while (*p) {
+		if (!sm_to_para(smc,sm,(int) *p)) {
+			DB_SMT("SMT: smt_check_para - missing para %x\n",*p,0);
+			return -1;
+		}
+		p++ ;
+	}
+	return 0;
+}
+
+void *sm_to_para(struct s_smc *smc, struct smt_header *sm, int para)
+{
+	char	*p ;
+	int	len ;
+	int	plen ;
+	void	*found = NULL;
+
+	SK_UNUSED(smc) ;
+
+	len = sm->smt_len ;
+	p = (char *)(sm+1) ;		/* pointer to info */
+	while (len > 0 ) {
+		if (((struct smt_para *)p)->p_type == para)
+			found = (void *) p ;
+		plen = ((struct smt_para *)p)->p_len + PARA_LEN ;
+		p += plen ;
+		len -= plen ;
+		if (len < 0) {
+			DB_SMT("SMT : sm_to_para - length error %d\n",plen,0) ;
+			return NULL;
+		}
+		if ((plen & 3) && (para != SMT_P_ECHODATA)) {
+			DB_SMT("SMT : sm_to_para - odd length %d\n",plen,0) ;
+			return NULL;
+		}
+		if (found)
+			return found;
+	}
+	return NULL;
+}
+
+#if	0
+/*
+ * send ANTC data test frame
+ */
+void fddi_send_antc(struct s_smc *smc, struct fddi_addr *dest)
+{
+	SK_UNUSED(smc) ;
+	SK_UNUSED(dest) ;
+#if	0
+	SMbuf			*mb ;
+	struct smt_header	*smt ;
+	int			i ;
+	char			*p ;
+
+	mb = smt_get_mbuf() ;
+	mb->sm_len = 3000+12 ;
+	p = smtod(mb, char *) + 12 ;
+	for (i = 0 ; i < 3000 ; i++)
+		*p++ = 1 << (i&7) ;
+
+	smt = smtod(mb, struct smt_header *) ;
+	smt->smt_dest = *dest ;
+	smt->smt_source = smc->mib.m[MAC0].fddiMACSMTAddress ;
+	smt_send_mbuf(smc,mb,FC_ASYNC_LLC) ;
+#endif
+}
+#endif
+
+#ifdef	DEBUG
+char *addr_to_string(struct fddi_addr *addr)
+{
+	int	i ;
+	static char	string[6*3] = "****" ;
+
+	for (i = 0 ; i < 6 ; i++) {
+		string[i * 3] = hex_asc_hi(addr->a[i]);
+		string[i * 3 + 1] = hex_asc_lo(addr->a[i]);
+		string[i * 3 + 2] = ':';
+	}
+	string[5 * 3 + 2] = 0;
+	return string;
+}
+#endif
+
+#ifdef	AM29K
+int smt_ifconfig(int argc, char *argv[])
+{
+	if (argc >= 2 && !strcmp(argv[0],"opt_bypass") &&
+	    !strcmp(argv[1],"yes")) {
+		smc->mib.fddiSMTBypassPresent = 1 ;
+		return 0;
+	}
+	return amdfddi_config(0, argc, argv);
+}
+#endif
+
+/*
+ * return static mac index
+ */
+static int mac_index(struct s_smc *smc, int mac)
+{
+	SK_UNUSED(mac) ;
+#ifdef	CONCENTRATOR
+	SK_UNUSED(smc) ;
+	return NUMPHYS + 1;
+#else
+	return (smc->s.sas == SMT_SAS) ? 2 : 3;
+#endif
+}
+
+/*
+ * return static phy index
+ */
+static int phy_index(struct s_smc *smc, int phy)
+{
+	SK_UNUSED(smc) ;
+	return phy + 1;
+}
+
+/*
+ * return dynamic mac connection resource index
+ */
+static int mac_con_resource_index(struct s_smc *smc, int mac)
+{
+#ifdef	CONCENTRATOR
+	SK_UNUSED(smc) ;
+	SK_UNUSED(mac) ;
+	return entity_to_index(smc, cem_get_downstream(smc, ENTITY_MAC));
+#else
+	SK_UNUSED(mac) ;
+	switch (smc->mib.fddiSMTCF_State) {
+	case SC9_C_WRAP_A :
+	case SC5_THRU_B :
+	case SC11_C_WRAP_S :
+		return 1;
+	case SC10_C_WRAP_B :
+	case SC4_THRU_A :
+		return 2;
+	}
+	return smc->s.sas == SMT_SAS ? 2 : 3;
+#endif
+}
+
+/*
+ * return dynamic phy connection resource index
+ */
+static int phy_con_resource_index(struct s_smc *smc, int phy)
+{
+#ifdef	CONCENTRATOR
+	return entity_to_index(smc, cem_get_downstream(smc, ENTITY_PHY(phy))) ;
+#else
+	switch (smc->mib.fddiSMTCF_State) {
+	case SC9_C_WRAP_A :
+		return phy == PA ? 3 : 2;
+	case SC10_C_WRAP_B :
+		return phy == PA ? 1 : 3;
+	case SC4_THRU_A :
+		return phy == PA ? 3 : 1;
+	case SC5_THRU_B :
+		return phy == PA ? 2 : 3;
+	case SC11_C_WRAP_S :
+		return 2;
+	}
+	return phy;
+#endif
+}
+
+#ifdef	CONCENTRATOR
+static int entity_to_index(struct s_smc *smc, int e)
+{
+	if (e == ENTITY_MAC)
+		return mac_index(smc, 1);
+	else
+		return phy_index(smc, e - ENTITY_PHY(0));
+}
+#endif
+
+#ifdef	LITTLE_ENDIAN
+static int smt_swap_short(u_short s)
+{
+	return ((s>>8)&0xff) | ((s&0xff)<<8);
+}
+
+void smt_swap_para(struct smt_header *sm, int len, int direction)
+/* int direction;	0 encode 1 decode */
+{
+	struct smt_para	*pa ;
+	const  struct smt_pdef	*pd ;
+	char	*p ;
+	int	plen ;
+	int	type ;
+	int	i ;
+
+/*	printf("smt_swap_para sm %x len %d dir %d\n",
+		sm,len,direction) ;
+ */
+	smt_string_swap((char *)sm,SWAP_SMTHEADER,len) ;
+
+	/* swap args */
+	len -= sizeof(struct smt_header) ;
+
+	p = (char *) (sm + 1) ;
+	while (len > 0) {
+		pa = (struct smt_para *) p ;
+		plen = pa->p_len ;
+		type = pa->p_type ;
+		pa->p_type = smt_swap_short(pa->p_type) ;
+		pa->p_len = smt_swap_short(pa->p_len) ;
+		if (direction) {
+			plen = pa->p_len ;
+			type = pa->p_type ;
+		}
+		/*
+		 * note: paras can have 0 length !
+		 */
+		if (plen < 0)
+			break ;
+		plen += PARA_LEN ;
+		for (i = N_SMT_PLEN, pd = smt_pdef; i ; i--,pd++) {
+			if (pd->ptype == type)
+				break ;
+		}
+		if (i && pd->pswap) {
+			smt_string_swap(p+PARA_LEN,pd->pswap,len) ;
+		}
+		len -= plen ;
+		p += plen ;
+	}
+}
+
+static void smt_string_swap(char *data, const char *format, int len)
+{
+	const char	*open_paren = NULL ;
+	int	x ;
+
+	while (len > 0  && *format) {
+		switch (*format) {
+		case '[' :
+			open_paren = format ;
+			break ;
+		case ']' :
+			format = open_paren ;
+			break ;
+		case '1' :
+		case '2' :
+		case '3' :
+		case '4' :
+		case '5' :
+		case '6' :
+		case '7' :
+		case '8' :
+		case '9' :
+			data  += *format - '0' ;
+			len   -= *format - '0' ;
+			break ;
+		case 'c':
+			data++ ;
+			len-- ;
+			break ;
+		case 's' :
+			x = data[0] ;
+			data[0] = data[1] ;
+			data[1] = x ;
+			data += 2 ;
+			len -= 2 ;
+			break ;
+		case 'l' :
+			x = data[0] ;
+			data[0] = data[3] ;
+			data[3] = x ;
+			x = data[1] ;
+			data[1] = data[2] ;
+			data[2] = x ;
+			data += 4 ;
+			len -= 4 ;
+			break ;
+		}
+		format++ ;
+	}
+}
+#else
+void smt_swap_para(struct smt_header *sm, int len, int direction)
+/* int direction;	0 encode 1 decode */
+{
+	SK_UNUSED(sm) ;
+	SK_UNUSED(len) ;
+	SK_UNUSED(direction) ;
+}
+#endif
+
+/*
+ * PMF actions
+ */
+int smt_action(struct s_smc *smc, int class, int code, int index)
+{
+	int	event ;
+	int	port ;
+	DB_SMT("SMT: action %d code %d\n",class,code) ;
+	switch(class) {
+	case SMT_STATION_ACTION :
+		switch(code) {
+		case SMT_STATION_ACTION_CONNECT :
+			smc->mib.fddiSMTRemoteDisconnectFlag = FALSE ;
+			queue_event(smc,EVENT_ECM,EC_CONNECT) ;
+			break ;
+		case SMT_STATION_ACTION_DISCONNECT :
+			queue_event(smc,EVENT_ECM,EC_DISCONNECT) ;
+			smc->mib.fddiSMTRemoteDisconnectFlag = TRUE ;
+			RS_SET(smc,RS_DISCONNECT) ;
+			AIX_EVENT(smc, (u_long) FDDI_RING_STATUS, (u_long)
+				FDDI_SMT_EVENT, (u_long) FDDI_REMOTE_DISCONNECT,
+				smt_get_event_word(smc));
+			break ;
+		case SMT_STATION_ACTION_PATHTEST :
+			AIX_EVENT(smc, (u_long) FDDI_RING_STATUS, (u_long)
+				FDDI_SMT_EVENT, (u_long) FDDI_PATH_TEST,
+				smt_get_event_word(smc));
+			break ;
+		case SMT_STATION_ACTION_SELFTEST :
+			AIX_EVENT(smc, (u_long) FDDI_RING_STATUS, (u_long)
+				FDDI_SMT_EVENT, (u_long) FDDI_REMOTE_SELF_TEST,
+				smt_get_event_word(smc));
+			break ;
+		case SMT_STATION_ACTION_DISABLE_A :
+			if (smc->y[PA].pc_mode == PM_PEER) {
+				RS_SET(smc,RS_EVENT) ;
+				queue_event(smc,EVENT_PCM+PA,PC_DISABLE) ;
+			}
+			break ;
+		case SMT_STATION_ACTION_DISABLE_B :
+			if (smc->y[PB].pc_mode == PM_PEER) {
+				RS_SET(smc,RS_EVENT) ;
+				queue_event(smc,EVENT_PCM+PB,PC_DISABLE) ;
+			}
+			break ;
+		case SMT_STATION_ACTION_DISABLE_M :
+			for (port = 0 ; port <  NUMPHYS ; port++) {
+				if (smc->mib.p[port].fddiPORTMy_Type != TM)
+					continue ;
+				RS_SET(smc,RS_EVENT) ;
+				queue_event(smc,EVENT_PCM+port,PC_DISABLE) ;
+			}
+			break ;
+		default :
+			return 1;
+		}
+		break ;
+	case SMT_PORT_ACTION :
+		switch(code) {
+		case SMT_PORT_ACTION_ENABLE :
+			event = PC_ENABLE ;
+			break ;
+		case SMT_PORT_ACTION_DISABLE :
+			event = PC_DISABLE ;
+			break ;
+		case SMT_PORT_ACTION_MAINT :
+			event = PC_MAINT ;
+			break ;
+		case SMT_PORT_ACTION_START :
+			event = PC_START ;
+			break ;
+		case SMT_PORT_ACTION_STOP :
+			event = PC_STOP ;
+			break ;
+		default :
+			return 1;
+		}
+		queue_event(smc,EVENT_PCM+index,event) ;
+		break ;
+	default :
+		return 1;
+	}
+	return 0;
+}
+
+/*
+ * canonical conversion of <len> bytes beginning form *data
+ */
+#ifdef  USE_CAN_ADDR
+static void hwm_conv_can(struct s_smc *smc, char *data, int len)
+{
+	int i ;
+
+	SK_UNUSED(smc) ;
+
+	for (i = len; i ; i--, data++)
+		*data = bitrev8(*data);
+}
+#endif
+
+#endif	/* no SLIM_SMT */
+
diff --git a/drivers/net/fddi/skfp/smtdef.c b/drivers/net/fddi/skfp/smtdef.c
new file mode 100644
index 0000000..1acab0b
--- /dev/null
+++ b/drivers/net/fddi/skfp/smtdef.c
@@ -0,0 +1,355 @@
+/******************************************************************************
+ *
+ *	(C)Copyright 1998,1999 SysKonnect,
+ *	a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ *	See the file "skfddi.c" for further information.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+	SMT/CMT defaults
+*/
+
+#include "h/types.h"
+#include "h/fddi.h"
+#include "h/smc.h"
+
+#ifndef OEM_USER_DATA
+#define OEM_USER_DATA	"SK-NET FDDI V2.0 Userdata"
+#endif
+
+#ifndef	lint
+static const char ID_sccs[] = "@(#)smtdef.c	2.53 99/08/11 (C) SK " ;
+#endif
+
+/*
+ * defaults
+ */
+#define TTMS(x)	((u_long)(x)*1000L)
+#define TTS(x)	((u_long)(x)*1000000L)
+#define TTUS(x)	((u_long)(x))
+
+#define DEFAULT_TB_MIN		TTMS(5)
+#define DEFAULT_TB_MAX		TTMS(50)
+#define DEFAULT_C_MIN		TTUS(1600)
+#define DEFAULT_T_OUT		TTMS(100+5)
+#define DEFAULT_TL_MIN		TTUS(30)
+#define DEFAULT_LC_SHORT	TTMS(50+5)
+#define DEFAULT_LC_MEDIUM	TTMS(500+20)
+#define DEFAULT_LC_LONG		TTS(5)+TTMS(50)
+#define DEFAULT_LC_EXTENDED	TTS(50)+TTMS(50)
+#define DEFAULT_T_NEXT_9	TTMS(200+10)
+#define DEFAULT_NS_MAX		TTUS(1310)
+#define DEFAULT_I_MAX		TTMS(25)
+#define DEFAULT_IN_MAX		TTMS(40)
+#define DEFAULT_TD_MIN		TTMS(5)
+#define DEFAULT_T_NON_OP	TTS(1)
+#define DEFAULT_T_STUCK		TTS(8)
+#define DEFAULT_T_DIRECT	TTMS(370)
+#define DEFAULT_T_JAM		TTMS(370)
+#define DEFAULT_T_ANNOUNCE	TTMS(2500)
+#define DEFAULT_D_MAX		TTUS(1617)
+#define DEFAULT_LEM_ALARM	(8)
+#define DEFAULT_LEM_CUTOFF	(7)
+#define DEFAULT_TEST_DONE	TTS(1)
+#define DEFAULT_CHECK_POLL	TTS(1)
+#define DEFAULT_POLL		TTMS(50)
+
+/*
+ * LCT errors threshold
+ */
+#define DEFAULT_LCT_SHORT	1
+#define DEFAULT_LCT_MEDIUM	3
+#define DEFAULT_LCT_LONG	5
+#define DEFAULT_LCT_EXTEND	50
+
+/* Forward declarations */
+void smt_reset_defaults(struct s_smc *smc, int level);
+static void smt_init_mib(struct s_smc *smc, int level);
+static int set_min_max(int maxflag, u_long mib, u_long limit, u_long *oper);
+
+#define MS2BCLK(x)	((x)*12500L)
+#define US2BCLK(x)	((x)*1250L)
+
+void smt_reset_defaults(struct s_smc *smc, int level)
+{
+	struct smt_config	*smt ;
+	int			i ;
+	u_long			smt_boot_time;
+
+
+	smt_init_mib(smc,level) ;
+
+	smc->os.smc_version = SMC_VERSION ;
+	smt_boot_time = smt_get_time();
+	for( i = 0; i < NUMMACS; i++ )
+		smc->sm.last_tok_time[i] = smt_boot_time ;
+	smt = &smc->s ;
+	smt->attach_s = 0 ;
+	smt->build_ring_map = 1 ;
+	smt->sas = SMT_DAS ;
+	smt->numphys = NUMPHYS ;
+	smt->pcm_tb_min = DEFAULT_TB_MIN ;
+	smt->pcm_tb_max = DEFAULT_TB_MAX ;
+	smt->pcm_c_min = DEFAULT_C_MIN ;
+	smt->pcm_t_out = DEFAULT_T_OUT ;
+	smt->pcm_tl_min = DEFAULT_TL_MIN ;
+	smt->pcm_lc_short = DEFAULT_LC_SHORT ;
+	smt->pcm_lc_medium = DEFAULT_LC_MEDIUM ;
+	smt->pcm_lc_long = DEFAULT_LC_LONG ;
+	smt->pcm_lc_extended = DEFAULT_LC_EXTENDED ;
+	smt->pcm_t_next_9 = DEFAULT_T_NEXT_9 ;
+	smt->pcm_ns_max = DEFAULT_NS_MAX ;
+	smt->ecm_i_max = DEFAULT_I_MAX ;
+	smt->ecm_in_max = DEFAULT_IN_MAX ;
+	smt->ecm_td_min = DEFAULT_TD_MIN ;
+	smt->ecm_test_done = DEFAULT_TEST_DONE ;
+	smt->ecm_check_poll = DEFAULT_CHECK_POLL ;
+	smt->rmt_t_non_op = DEFAULT_T_NON_OP ;
+	smt->rmt_t_stuck = DEFAULT_T_STUCK ;
+	smt->rmt_t_direct = DEFAULT_T_DIRECT ;
+	smt->rmt_t_jam = DEFAULT_T_JAM ;
+	smt->rmt_t_announce = DEFAULT_T_ANNOUNCE ;
+	smt->rmt_t_poll = DEFAULT_POLL ;
+        smt->rmt_dup_mac_behavior = FALSE ;  /* See Struct smt_config */
+	smt->mac_d_max = DEFAULT_D_MAX ;
+
+	smt->lct_short = DEFAULT_LCT_SHORT ;
+	smt->lct_medium = DEFAULT_LCT_MEDIUM ;
+	smt->lct_long = DEFAULT_LCT_LONG ;
+	smt->lct_extended = DEFAULT_LCT_EXTEND ;
+
+#ifndef	SLIM_SMT
+#ifdef	ESS
+	if (level == 0) {
+		smc->ess.sync_bw_available = FALSE ;
+		smc->mib.fddiESSPayload = 0 ;
+		smc->mib.fddiESSOverhead = 0 ;
+		smc->mib.fddiESSMaxTNeg = (u_long)(- MS2BCLK(25)) ;
+		smc->mib.fddiESSMinSegmentSize = 1 ;
+		smc->mib.fddiESSCategory = SB_STATIC ;
+		smc->mib.fddiESSSynchTxMode = FALSE ;
+		smc->ess.raf_act_timer_poll = FALSE ;
+		smc->ess.timer_count = 7 ; 	/* first RAF alc req after 3s */
+	}
+	smc->ess.local_sba_active = FALSE ;
+	smc->ess.sba_reply_pend = NULL ;
+#endif
+#ifdef	SBA
+	smt_init_sba(smc,level) ;
+#endif
+#endif	/* no SLIM_SMT */
+#ifdef	TAG_MODE
+	if (level == 0) {
+		smc->hw.pci_fix_value = 0 ;
+	}
+#endif
+}
+
+/*
+ * manufacturer data
+ */
+static const char man_data[32] =
+/*	 01234567890123456789012345678901	*/
+	"xxxSK-NET FDDI SMT 7.3 - V2.8.8" ;
+
+static void smt_init_mib(struct s_smc *smc, int level)
+{
+	struct fddi_mib		*mib ;
+	struct fddi_mib_p	*pm ;
+	int			port ;
+	int			path ;
+
+	mib = &smc->mib ;
+	if (level == 0) {
+		/*
+		 * set EVERYTHING to ZERO
+		 * EXCEPT hw and os
+		 */
+		memset(((char *)smc)+
+			sizeof(struct s_smt_os)+sizeof(struct s_smt_hw), 0,
+			sizeof(struct s_smc) -
+			sizeof(struct s_smt_os) - sizeof(struct s_smt_hw)) ;
+	}
+	else {
+		mib->fddiSMTRemoteDisconnectFlag = 0 ;
+		mib->fddiSMTPeerWrapFlag = 0 ;
+	}
+
+	mib->fddiSMTOpVersionId = 2 ;
+	mib->fddiSMTHiVersionId = 2 ;
+	mib->fddiSMTLoVersionId = 2 ;
+	memcpy((char *) mib->fddiSMTManufacturerData,man_data,32) ;
+	if (level == 0) {
+		strcpy(mib->fddiSMTUserData,OEM_USER_DATA) ;
+	}
+	mib->fddiSMTMIBVersionId = 1 ;
+	mib->fddiSMTMac_Ct = NUMMACS ;
+	mib->fddiSMTConnectionPolicy = POLICY_MM | POLICY_AA | POLICY_BB ;
+
+	/*
+	 * fddiSMTNonMaster_Ct and fddiSMTMaster_Ct are set in smt_fixup_mib
+	 * s.sas is not set yet (is set in init driver)
+	 */
+	mib->fddiSMTAvailablePaths = MIB_PATH_P | MIB_PATH_S ;
+
+	mib->fddiSMTConfigCapabilities = 0 ;	/* no hold,no wrap_ab*/
+	mib->fddiSMTTT_Notify = 10 ;
+	mib->fddiSMTStatRptPolicy = TRUE ;
+	mib->fddiSMTTrace_MaxExpiration = SEC2MIB(7) ;
+	mib->fddiSMTMACIndexes = INDEX_MAC ;
+	mib->fddiSMTStationStatus = MIB_SMT_STASTA_SEPA ;	/* separated */
+
+	mib->m[MAC0].fddiMACIndex = INDEX_MAC ;
+	mib->m[MAC0].fddiMACFrameStatusFunctions = FSC_TYPE0 ;
+	mib->m[MAC0].fddiMACRequestedPaths =
+		MIB_P_PATH_LOCAL |
+		MIB_P_PATH_SEC_ALTER |
+		MIB_P_PATH_PRIM_ALTER ;
+	mib->m[MAC0].fddiMACAvailablePaths = MIB_PATH_P ;
+	mib->m[MAC0].fddiMACCurrentPath = MIB_PATH_PRIMARY ;
+	mib->m[MAC0].fddiMACT_MaxCapabilitiy = (u_long)(- MS2BCLK(165)) ;
+	mib->m[MAC0].fddiMACTVXCapabilitiy = (u_long)(- US2BCLK(52)) ;
+	if (level == 0) {
+		mib->m[MAC0].fddiMACTvxValue = (u_long)(- US2BCLK(27)) ;
+		mib->m[MAC0].fddiMACTvxValueMIB = (u_long)(- US2BCLK(27)) ;
+		mib->m[MAC0].fddiMACT_Req = (u_long)(- MS2BCLK(165)) ;
+		mib->m[MAC0].fddiMACT_ReqMIB = (u_long)(- MS2BCLK(165)) ;
+		mib->m[MAC0].fddiMACT_Max = (u_long)(- MS2BCLK(165)) ;
+		mib->m[MAC0].fddiMACT_MaxMIB = (u_long)(- MS2BCLK(165)) ;
+		mib->m[MAC0].fddiMACT_Min = (u_long)(- MS2BCLK(4)) ;
+	}
+	mib->m[MAC0].fddiMACHardwarePresent = TRUE ;
+	mib->m[MAC0].fddiMACMA_UnitdataEnable = TRUE ;
+	mib->m[MAC0].fddiMACFrameErrorThreshold = 1 ;
+	mib->m[MAC0].fddiMACNotCopiedThreshold = 1 ;
+	/*
+	 * Path attributes
+	 */
+	for (path = 0 ; path < NUMPATHS ; path++) {
+		mib->a[path].fddiPATHIndex = INDEX_PATH + path ;
+		if (level == 0) {
+			mib->a[path].fddiPATHTVXLowerBound =
+				(u_long)(- US2BCLK(27)) ;
+			mib->a[path].fddiPATHT_MaxLowerBound =
+				(u_long)(- MS2BCLK(165)) ;
+			mib->a[path].fddiPATHMaxT_Req =
+				(u_long)(- MS2BCLK(165)) ;
+		}
+	}
+
+
+	/*
+	 * Port attributes
+	 */
+	pm = mib->p ;
+	for (port = 0 ; port <  NUMPHYS ; port++) {
+		/*
+		 * set MIB pointer in phy
+		 */
+		/* Attention: don't initialize mib pointer here! */
+		/*  It must be initialized during phase 2 */
+		smc->y[port].mib = NULL;
+		mib->fddiSMTPORTIndexes[port] = port+INDEX_PORT ;
+
+		pm->fddiPORTIndex = port+INDEX_PORT ;
+		pm->fddiPORTHardwarePresent = TRUE ;
+		if (level == 0) {
+			pm->fddiPORTLer_Alarm = DEFAULT_LEM_ALARM ;
+			pm->fddiPORTLer_Cutoff = DEFAULT_LEM_CUTOFF ;
+		}
+		/*
+		 * fddiPORTRequestedPaths are set in pcmplc.c
+		 * we don't know the port type yet !
+		 */
+		pm->fddiPORTRequestedPaths[1] = 0 ;
+		pm->fddiPORTRequestedPaths[2] = 0 ;
+		pm->fddiPORTRequestedPaths[3] = 0 ;
+		pm->fddiPORTAvailablePaths = MIB_PATH_P ;
+		pm->fddiPORTPMDClass = MIB_PMDCLASS_MULTI ;
+		pm++ ;
+	}
+
+	(void) smt_set_mac_opvalues(smc) ;
+}
+
+int smt_set_mac_opvalues(struct s_smc *smc)
+{
+	int	st ;
+	int	st2 ;
+
+	st = set_min_max(1,smc->mib.m[MAC0].fddiMACTvxValueMIB,
+		smc->mib.a[PATH0].fddiPATHTVXLowerBound,
+		&smc->mib.m[MAC0].fddiMACTvxValue) ;
+	st |= set_min_max(0,smc->mib.m[MAC0].fddiMACT_MaxMIB,
+		smc->mib.a[PATH0].fddiPATHT_MaxLowerBound,
+		&smc->mib.m[MAC0].fddiMACT_Max) ;
+	st |= (st2 = set_min_max(0,smc->mib.m[MAC0].fddiMACT_ReqMIB,
+		smc->mib.a[PATH0].fddiPATHMaxT_Req,
+		&smc->mib.m[MAC0].fddiMACT_Req)) ;
+	if (st2) {
+		/* Treq attribute changed remotely. So send an AIX_EVENT to the
+		 * user
+		 */
+		AIX_EVENT(smc, (u_long) FDDI_RING_STATUS, (u_long)
+			FDDI_SMT_EVENT, (u_long) FDDI_REMOTE_T_REQ,
+			smt_get_event_word(smc));
+	}
+	return st;
+}
+
+void smt_fixup_mib(struct s_smc *smc)
+{
+#ifdef	CONCENTRATOR
+	switch (smc->s.sas) {
+	case SMT_SAS :
+		smc->mib.fddiSMTNonMaster_Ct = 1 ;
+		break ;
+	case SMT_DAS :
+		smc->mib.fddiSMTNonMaster_Ct = 2 ;
+		break ;
+	case SMT_NAC :
+		smc->mib.fddiSMTNonMaster_Ct = 0 ;
+		break ;
+	}
+	smc->mib.fddiSMTMaster_Ct = NUMPHYS - smc->mib.fddiSMTNonMaster_Ct ;
+#else
+	switch (smc->s.sas) {
+	case SMT_SAS :
+		smc->mib.fddiSMTNonMaster_Ct = 1 ;
+		break ;
+	case SMT_DAS :
+		smc->mib.fddiSMTNonMaster_Ct = 2 ;
+		break ;
+	}
+	smc->mib.fddiSMTMaster_Ct = 0 ;
+#endif
+}
+
+/*
+ * determine new setting for operational value
+ * if limit is lower than mib
+ *	use limit
+ * else
+ *	use mib
+ * NOTE : numbers are negative, negate comparison !
+ */
+static int set_min_max(int maxflag, u_long mib, u_long limit, u_long *oper)
+{
+	u_long	old ;
+	old = *oper ;
+	if ((limit > mib) ^ maxflag)
+		*oper = limit ;
+	else
+		*oper = mib ;
+	return old != *oper;
+}
+
diff --git a/drivers/net/fddi/skfp/smtinit.c b/drivers/net/fddi/skfp/smtinit.c
new file mode 100644
index 0000000..e3a0c0b
--- /dev/null
+++ b/drivers/net/fddi/skfp/smtinit.c
@@ -0,0 +1,125 @@
+/******************************************************************************
+ *
+ *	(C)Copyright 1998,1999 SysKonnect,
+ *	a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ *	See the file "skfddi.c" for further information.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+	Init SMT
+	call all module level initialization routines
+*/
+
+#include "h/types.h"
+#include "h/fddi.h"
+#include "h/smc.h"
+
+#ifndef	lint
+static const char ID_sccs[] = "@(#)smtinit.c	1.15 97/05/06 (C) SK " ;
+#endif
+
+void init_fddi_driver(struct s_smc *smc, u_char *mac_addr);
+
+/* define global debug variable */
+#if defined(DEBUG) && !defined(DEBUG_BRD)
+struct smt_debug debug;
+#endif
+
+#ifndef MULT_OEM
+#define OEMID(smc,i)	oem_id[i]
+	extern u_char	oem_id[] ;
+#else	/* MULT_OEM */
+#define OEMID(smc,i)	smc->hw.oem_id->oi_mark[i]
+	extern struct s_oem_ids	oem_ids[] ;
+#endif	/* MULT_OEM */
+
+/*
+ * Set OEM specific values
+ *
+ * Can not be called in smt_reset_defaults, because it is not sure that
+ * the OEM ID is already defined.
+ */
+static void set_oem_spec_val(struct s_smc *smc)
+{
+	struct fddi_mib *mib ;
+
+	mib = &smc->mib ;
+
+	/*
+	 * set IBM specific values
+	 */
+	if (OEMID(smc,0) == 'I') {
+		mib->fddiSMTConnectionPolicy = POLICY_MM ;
+	}
+}
+
+/*
+ * Init SMT
+ */
+int init_smt(struct s_smc *smc, u_char *mac_addr)
+/* u_char *mac_addr;	canonical address or NULL */
+{
+	int	p ;
+
+#if defined(DEBUG) && !defined(DEBUG_BRD)
+	debug.d_smt = 0 ;
+	debug.d_smtf = 0 ;
+	debug.d_rmt = 0 ;
+	debug.d_ecm = 0 ;
+	debug.d_pcm = 0 ;
+	debug.d_cfm = 0 ;
+
+	debug.d_plc = 0 ;
+#ifdef	ESS
+	debug.d_ess = 0 ;
+#endif
+#ifdef	SBA
+	debug.d_sba = 0 ;
+#endif
+#endif	/* DEBUG && !DEBUG_BRD */
+
+	/* First initialize the ports mib->pointers */
+	for ( p = 0; p < NUMPHYS; p ++ ) {
+		smc->y[p].mib = & smc->mib.p[p] ;
+	}
+
+	set_oem_spec_val(smc) ;	
+	(void) smt_set_mac_opvalues(smc) ;
+	init_fddi_driver(smc,mac_addr) ;	/* HW driver */
+	smt_fixup_mib(smc) ;		/* update values that depend on s.sas */
+
+	ev_init(smc) ;			/* event queue */
+#ifndef	SLIM_SMT
+	smt_init_evc(smc) ;		/* evcs in MIB */
+#endif	/* no SLIM_SMT */
+	smt_timer_init(smc) ;		/* timer package */
+	smt_agent_init(smc) ;		/* SMT frame manager */
+
+	pcm_init(smc) ;			/* PCM state machine */
+	ecm_init(smc) ;			/* ECM state machine */
+	cfm_init(smc) ;			/* CFM state machine */
+	rmt_init(smc) ;			/* RMT state machine */
+
+	for (p = 0 ; p < NUMPHYS ; p++) {
+		pcm(smc,p,0) ;		/* PCM A state machine */
+	}
+	ecm(smc,0) ;			/* ECM state machine */
+	cfm(smc,0) ;			/* CFM state machine */
+	rmt(smc,0) ;			/* RMT state machine */
+
+	smt_agent_task(smc) ;		/* NIF FSM etc */
+
+        PNMI_INIT(smc) ;                /* PNMI initialization */
+
+	return 0;
+}
+
diff --git a/drivers/net/fddi/skfp/smttimer.c b/drivers/net/fddi/skfp/smttimer.c
new file mode 100644
index 0000000..531795e
--- /dev/null
+++ b/drivers/net/fddi/skfp/smttimer.c
@@ -0,0 +1,156 @@
+/******************************************************************************
+ *
+ *	(C)Copyright 1998,1999 SysKonnect,
+ *	a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ *	See the file "skfddi.c" for further information.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+	SMT timer
+*/
+
+#include "h/types.h"
+#include "h/fddi.h"
+#include "h/smc.h"
+
+#ifndef	lint
+static const char ID_sccs[] = "@(#)smttimer.c	2.4 97/08/04 (C) SK " ;
+#endif
+
+static void timer_done(struct s_smc *smc, int restart);
+
+void smt_timer_init(struct s_smc *smc)
+{
+	smc->t.st_queue = NULL;
+	smc->t.st_fast.tm_active = FALSE ;
+	smc->t.st_fast.tm_next = NULL;
+	hwt_init(smc) ;
+}
+
+void smt_timer_stop(struct s_smc *smc, struct smt_timer *timer)
+{
+	struct smt_timer	**prev ;
+	struct smt_timer	*tm ;
+
+	/*
+	 * remove timer from queue
+	 */
+	timer->tm_active = FALSE ;
+	if (smc->t.st_queue == timer && !timer->tm_next) {
+		hwt_stop(smc) ;
+	}
+	for (prev = &smc->t.st_queue ; (tm = *prev) ; prev = &tm->tm_next ) {
+		if (tm == timer) {
+			*prev = tm->tm_next ;
+			if (tm->tm_next) {
+				tm->tm_next->tm_delta += tm->tm_delta ;
+			}
+			return ;
+		}
+	}
+}
+
+void smt_timer_start(struct s_smc *smc, struct smt_timer *timer, u_long time,
+		     u_long token)
+{
+	struct smt_timer	**prev ;
+	struct smt_timer	*tm ;
+	u_long			delta = 0 ;
+
+	time /= 16 ;		/* input is uS, clock ticks are 16uS */
+	if (!time)
+		time = 1 ;
+	smt_timer_stop(smc,timer) ;
+	timer->tm_smc = smc ;
+	timer->tm_token = token ;
+	timer->tm_active = TRUE ;
+	if (!smc->t.st_queue) {
+		smc->t.st_queue = timer ;
+		timer->tm_next = NULL;
+		timer->tm_delta = time ;
+		hwt_start(smc,time) ;
+		return ;
+	}
+	/*
+	 * timer correction
+	 */
+	timer_done(smc,0) ;
+
+	/*
+	 * find position in queue
+	 */
+	delta = 0 ;
+	for (prev = &smc->t.st_queue ; (tm = *prev) ; prev = &tm->tm_next ) {
+		if (delta + tm->tm_delta > time) {
+			break ;
+		}
+		delta += tm->tm_delta ;
+	}
+	/* insert in queue */
+	*prev = timer ;
+	timer->tm_next = tm ;
+	timer->tm_delta = time - delta ;
+	if (tm)
+		tm->tm_delta -= timer->tm_delta ;
+	/*
+	 * start new with first
+	 */
+	hwt_start(smc,smc->t.st_queue->tm_delta) ;
+}
+
+void smt_force_irq(struct s_smc *smc)
+{
+	smt_timer_start(smc,&smc->t.st_fast,32L, EV_TOKEN(EVENT_SMT,SM_FAST)); 
+}
+
+void smt_timer_done(struct s_smc *smc)
+{
+	timer_done(smc,1) ;
+}
+
+static void timer_done(struct s_smc *smc, int restart)
+{
+	u_long			delta ;
+	struct smt_timer	*tm ;
+	struct smt_timer	*next ;
+	struct smt_timer	**last ;
+	int			done = 0 ;
+
+	delta = hwt_read(smc) ;
+	last = &smc->t.st_queue ;
+	tm = smc->t.st_queue ;
+	while (tm && !done) {
+		if (delta >= tm->tm_delta) {
+			tm->tm_active = FALSE ;
+			delta -= tm->tm_delta ;
+			last = &tm->tm_next ;
+			tm = tm->tm_next ;
+		}
+		else {
+			tm->tm_delta -= delta ;
+			delta = 0 ;
+			done = 1 ;
+		}
+	}
+	*last = NULL;
+	next = smc->t.st_queue ;
+	smc->t.st_queue = tm ;
+
+	for ( tm = next ; tm ; tm = next) {
+		next = tm->tm_next ;
+		timer_event(smc,tm->tm_token) ;
+	}
+
+	if (restart && smc->t.st_queue)
+		hwt_start(smc,smc->t.st_queue->tm_delta) ;
+}
+
diff --git a/drivers/net/fddi/skfp/srf.c b/drivers/net/fddi/skfp/srf.c
new file mode 100644
index 0000000..f6f7baf
--- /dev/null
+++ b/drivers/net/fddi/skfp/srf.c
@@ -0,0 +1,429 @@
+/******************************************************************************
+ *
+ *	(C)Copyright 1998,1999 SysKonnect,
+ *	a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ *	See the file "skfddi.c" for further information.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+	SMT 7.2 Status Response Frame Implementation
+	SRF state machine and frame generation
+*/
+
+#include "h/types.h"
+#include "h/fddi.h"
+#include "h/smc.h"
+#include "h/smt_p.h"
+
+#define KERNEL
+#include "h/smtstate.h"
+
+#ifndef	SLIM_SMT
+#ifndef	BOOT
+
+#ifndef	lint
+static const char ID_sccs[] = "@(#)srf.c	1.18 97/08/04 (C) SK " ;
+#endif
+
+
+/*
+ * function declarations
+ */
+static void clear_all_rep(struct s_smc *smc);
+static void clear_reported(struct s_smc *smc);
+static void smt_send_srf(struct s_smc *smc);
+static struct s_srf_evc *smt_get_evc(struct s_smc *smc, int code, int index);
+
+#define MAX_EVCS	ARRAY_SIZE(smc->evcs)
+
+struct evc_init {
+	u_char code ;
+	u_char index ;
+	u_char n ;
+	u_short	para ;
+}  ;
+
+static const struct evc_init evc_inits[] = {
+	{ SMT_COND_SMT_PEER_WRAP,		0,1,SMT_P1048	} ,
+
+	{ SMT_COND_MAC_DUP_ADDR,		INDEX_MAC, NUMMACS,SMT_P208C } ,
+	{ SMT_COND_MAC_FRAME_ERROR,		INDEX_MAC, NUMMACS,SMT_P208D } ,
+	{ SMT_COND_MAC_NOT_COPIED,		INDEX_MAC, NUMMACS,SMT_P208E } ,
+	{ SMT_EVENT_MAC_NEIGHBOR_CHANGE,	INDEX_MAC, NUMMACS,SMT_P208F } ,
+	{ SMT_EVENT_MAC_PATH_CHANGE,		INDEX_MAC, NUMMACS,SMT_P2090 } ,
+
+	{ SMT_COND_PORT_LER,			INDEX_PORT,NUMPHYS,SMT_P4050 } ,
+	{ SMT_COND_PORT_EB_ERROR,		INDEX_PORT,NUMPHYS,SMT_P4052 } ,
+	{ SMT_EVENT_PORT_CONNECTION,		INDEX_PORT,NUMPHYS,SMT_P4051 } ,
+	{ SMT_EVENT_PORT_PATH_CHANGE,		INDEX_PORT,NUMPHYS,SMT_P4053 } ,
+} ;
+
+#define MAX_INIT_EVC	ARRAY_SIZE(evc_inits)
+
+void smt_init_evc(struct s_smc *smc)
+{
+	struct s_srf_evc	*evc ;
+	const struct evc_init 	*init ;
+	int			i ;
+	int			index ;
+	int			offset ;
+
+	static u_char		fail_safe = FALSE ;
+
+	memset((char *)smc->evcs,0,sizeof(smc->evcs)) ;
+
+	evc = smc->evcs ;
+	init = evc_inits ;
+
+	for (i = 0 ; (unsigned) i < MAX_INIT_EVC ; i++) {
+		for (index = 0 ; index < init->n ; index++) {
+			evc->evc_code = init->code ;
+			evc->evc_para = init->para ;
+			evc->evc_index = init->index + index ;
+#ifndef	DEBUG
+			evc->evc_multiple = &fail_safe ;
+			evc->evc_cond_state = &fail_safe ;
+#endif
+			evc++ ;
+		}
+		init++ ;
+	}
+
+	if ((unsigned) (evc - smc->evcs) > MAX_EVCS) {
+		SMT_PANIC(smc,SMT_E0127, SMT_E0127_MSG) ;
+	}
+
+	/*
+	 * conditions
+	 */
+	smc->evcs[0].evc_cond_state = &smc->mib.fddiSMTPeerWrapFlag ;
+	smc->evcs[1].evc_cond_state =
+		&smc->mib.m[MAC0].fddiMACDuplicateAddressCond ;
+	smc->evcs[2].evc_cond_state =
+		&smc->mib.m[MAC0].fddiMACFrameErrorFlag ;
+	smc->evcs[3].evc_cond_state =
+		&smc->mib.m[MAC0].fddiMACNotCopiedFlag ;
+
+	/*
+	 * events
+	 */
+	smc->evcs[4].evc_multiple = &smc->mib.m[MAC0].fddiMACMultiple_N ;
+	smc->evcs[5].evc_multiple = &smc->mib.m[MAC0].fddiMACMultiple_P ;
+
+	offset = 6 ;
+	for (i = 0 ; i < NUMPHYS ; i++) {
+		/*
+		 * conditions
+		 */
+		smc->evcs[offset + 0*NUMPHYS].evc_cond_state =
+			&smc->mib.p[i].fddiPORTLerFlag ;
+		smc->evcs[offset + 1*NUMPHYS].evc_cond_state =
+			&smc->mib.p[i].fddiPORTEB_Condition ;
+
+		/*
+		 * events
+		 */
+		smc->evcs[offset + 2*NUMPHYS].evc_multiple =
+			&smc->mib.p[i].fddiPORTMultiple_U ;
+		smc->evcs[offset + 3*NUMPHYS].evc_multiple =
+			&smc->mib.p[i].fddiPORTMultiple_P ;
+		offset++ ;
+	}
+#ifdef	DEBUG
+	for (i = 0, evc = smc->evcs ; (unsigned) i < MAX_EVCS ; i++, evc++) {
+		if (SMT_IS_CONDITION(evc->evc_code)) {
+			if (!evc->evc_cond_state) {
+				SMT_PANIC(smc,SMT_E0128, SMT_E0128_MSG) ;
+			}
+			evc->evc_multiple = &fail_safe ;
+		}
+		else {
+			if (!evc->evc_multiple) {
+				SMT_PANIC(smc,SMT_E0129, SMT_E0129_MSG) ;
+			}
+			evc->evc_cond_state = &fail_safe ;
+		}
+	}
+#endif
+	smc->srf.TSR = smt_get_time() ;
+	smc->srf.sr_state = SR0_WAIT ;
+}
+
+static struct s_srf_evc *smt_get_evc(struct s_smc *smc, int code, int index)
+{
+	int			i ;
+	struct s_srf_evc	*evc ;
+
+	for (i = 0, evc = smc->evcs ; (unsigned) i < MAX_EVCS ; i++, evc++) {
+		if (evc->evc_code == code && evc->evc_index == index)
+			return evc;
+	}
+	return NULL;
+}
+
+#define THRESHOLD_2	(2*TICKS_PER_SECOND)
+#define THRESHOLD_32	(32*TICKS_PER_SECOND)
+
+#ifdef	DEBUG
+static const char * const srf_names[] = {
+	"None","MACPathChangeEvent",	"MACNeighborChangeEvent",
+	"PORTPathChangeEvent",		"PORTUndesiredConnectionAttemptEvent",
+	"SMTPeerWrapCondition",		"SMTHoldCondition",
+	"MACFrameErrorCondition",	"MACDuplicateAddressCondition",
+	"MACNotCopiedCondition",	"PORTEBErrorCondition",
+	"PORTLerCondition"
+} ;
+#endif
+
+void smt_srf_event(struct s_smc *smc, int code, int index, int cond)
+{
+	struct s_srf_evc	*evc ;
+	int			cond_asserted = 0 ;
+	int			cond_deasserted = 0 ;
+	int			event_occurred = 0 ;
+	int			tsr ;
+	int			T_Limit = 2*TICKS_PER_SECOND ;
+
+	if (code == SMT_COND_MAC_DUP_ADDR && cond) {
+		RS_SET(smc,RS_DUPADDR) ;
+	}
+
+	if (code) {
+		DB_SMT("SRF: %s index %d\n",srf_names[code],index) ;
+
+		if (!(evc = smt_get_evc(smc,code,index))) {
+			DB_SMT("SRF : smt_get_evc() failed\n",0,0) ;
+			return ;
+		}
+		/*
+		 * ignore condition if no change
+		 */
+		if (SMT_IS_CONDITION(code)) {
+			if (*evc->evc_cond_state == cond)
+				return ;
+		}
+
+		/*
+		 * set transition time stamp
+		 */
+		smt_set_timestamp(smc,smc->mib.fddiSMTTransitionTimeStamp) ;
+		if (SMT_IS_CONDITION(code)) {
+			DB_SMT("SRF: condition is %s\n",cond ? "ON":"OFF",0) ;
+			if (cond) {
+				*evc->evc_cond_state = TRUE ;
+				evc->evc_rep_required = TRUE ;
+				smc->srf.any_report = TRUE ;
+				cond_asserted = TRUE ;
+			}
+			else {
+				*evc->evc_cond_state = FALSE ;
+				cond_deasserted = TRUE ;
+			}
+		}
+		else {
+			if (evc->evc_rep_required) {
+				*evc->evc_multiple  = TRUE ;
+			}
+			else {
+				evc->evc_rep_required = TRUE ;
+				*evc->evc_multiple  = FALSE ;
+			}
+			smc->srf.any_report = TRUE ;
+			event_occurred = TRUE ;
+		}
+#ifdef	FDDI_MIB
+		snmp_srf_event(smc,evc) ;
+#endif	/* FDDI_MIB */
+	}
+	tsr = smt_get_time() - smc->srf.TSR ;
+
+	switch (smc->srf.sr_state) {
+	case SR0_WAIT :
+		/* SR01a */
+		if (cond_asserted && tsr < T_Limit) {
+			smc->srf.SRThreshold = THRESHOLD_2 ;
+			smc->srf.sr_state = SR1_HOLDOFF ;
+			break ;
+		}
+		/* SR01b */
+		if (cond_deasserted && tsr < T_Limit) {
+			smc->srf.sr_state = SR1_HOLDOFF ;
+			break ;
+		}
+		/* SR01c */
+		if (event_occurred && tsr < T_Limit) {
+			smc->srf.sr_state = SR1_HOLDOFF ;
+			break ;
+		}
+		/* SR00b */
+		if (cond_asserted && tsr >= T_Limit) {
+			smc->srf.SRThreshold = THRESHOLD_2 ;
+			smc->srf.TSR = smt_get_time() ;
+			smt_send_srf(smc) ;
+			break ;
+		}
+		/* SR00c */
+		if (cond_deasserted && tsr >= T_Limit) {
+			smc->srf.TSR = smt_get_time() ;
+			smt_send_srf(smc) ;
+			break ;
+		}
+		/* SR00d */
+		if (event_occurred && tsr >= T_Limit) {
+			smc->srf.TSR = smt_get_time() ;
+			smt_send_srf(smc) ;
+			break ;
+		}
+		/* SR00e */
+		if (smc->srf.any_report && (u_long) tsr >=
+			smc->srf.SRThreshold) {
+			smc->srf.SRThreshold *= 2 ;
+			if (smc->srf.SRThreshold > THRESHOLD_32)
+				smc->srf.SRThreshold = THRESHOLD_32 ;
+			smc->srf.TSR = smt_get_time() ;
+			smt_send_srf(smc) ;
+			break ;
+		}
+		/* SR02 */
+		if (!smc->mib.fddiSMTStatRptPolicy) {
+			smc->srf.sr_state = SR2_DISABLED ;
+			break ;
+		}
+		break ;
+	case SR1_HOLDOFF :
+		/* SR10b */
+		if (tsr >= T_Limit) {
+			smc->srf.sr_state = SR0_WAIT ;
+			smc->srf.TSR = smt_get_time() ;
+			smt_send_srf(smc) ;
+			break ;
+		}
+		/* SR11a */
+		if (cond_asserted) {
+			smc->srf.SRThreshold = THRESHOLD_2 ;
+		}
+		/* SR11b */
+		/* SR11c */
+		/* handled above */
+		/* SR12 */
+		if (!smc->mib.fddiSMTStatRptPolicy) {
+			smc->srf.sr_state = SR2_DISABLED ;
+			break ;
+		}
+		break ;
+	case SR2_DISABLED :
+		if (smc->mib.fddiSMTStatRptPolicy) {
+			smc->srf.sr_state = SR0_WAIT ;
+			smc->srf.TSR = smt_get_time() ;
+			smc->srf.SRThreshold = THRESHOLD_2 ;
+			clear_all_rep(smc) ;
+			break ;
+		}
+		break ;
+	}
+}
+
+static void clear_all_rep(struct s_smc *smc)
+{
+	struct s_srf_evc	*evc ;
+	int			i ;
+
+	for (i = 0, evc = smc->evcs ; (unsigned) i < MAX_EVCS ; i++, evc++) {
+		evc->evc_rep_required = FALSE ;
+		if (SMT_IS_CONDITION(evc->evc_code))
+			*evc->evc_cond_state = FALSE ;
+	}
+	smc->srf.any_report = FALSE ;
+}
+
+static void clear_reported(struct s_smc *smc)
+{
+	struct s_srf_evc	*evc ;
+	int			i ;
+
+	smc->srf.any_report = FALSE ;
+	for (i = 0, evc = smc->evcs ; (unsigned) i < MAX_EVCS ; i++, evc++) {
+		if (SMT_IS_CONDITION(evc->evc_code)) {
+			if (*evc->evc_cond_state == FALSE)
+				evc->evc_rep_required = FALSE ;
+			else
+				smc->srf.any_report = TRUE ;
+		}
+		else {
+			evc->evc_rep_required = FALSE ;
+			*evc->evc_multiple = FALSE ;
+		}
+	}
+}
+
+/*
+ * build and send SMT SRF frame
+ */
+static void smt_send_srf(struct s_smc *smc)
+{
+
+	struct smt_header	*smt ;
+	struct s_srf_evc	*evc ;
+	SK_LOC_DECL(struct s_pcon,pcon) ;
+	SMbuf			*mb ;
+	int			i ;
+
+	static const struct fddi_addr SMT_SRF_DA = {
+		{ 0x80, 0x01, 0x43, 0x00, 0x80, 0x08 }
+	} ;
+
+	/*
+	 * build SMT header
+	 */
+	if (!smc->r.sm_ma_avail)
+		return ;
+	if (!(mb = smt_build_frame(smc,SMT_SRF,SMT_ANNOUNCE,0)))
+		return ;
+
+	RS_SET(smc,RS_SOFTERROR) ;
+
+	smt = smtod(mb, struct smt_header *) ;
+	smt->smt_dest = SMT_SRF_DA ;		/* DA == SRF multicast */
+
+	/*
+	 * setup parameter status
+	 */
+	pcon.pc_len = SMT_MAX_INFO_LEN ;	/* max para length */
+	pcon.pc_err = 0 ;			/* no error */
+	pcon.pc_badset = 0 ;			/* no bad set count */
+	pcon.pc_p = (void *) (smt + 1) ;	/* paras start here */
+
+	smt_add_para(smc,&pcon,(u_short) SMT_P1033,0,0) ;
+	smt_add_para(smc,&pcon,(u_short) SMT_P1034,0,0) ;
+
+	for (i = 0, evc = smc->evcs ; (unsigned) i < MAX_EVCS ; i++, evc++) {
+		if (evc->evc_rep_required) {
+			smt_add_para(smc,&pcon,evc->evc_para,
+				(int)evc->evc_index,0) ;
+		}
+	}
+	smt->smt_len = SMT_MAX_INFO_LEN - pcon.pc_len ;
+	mb->sm_len = smt->smt_len + sizeof(struct smt_header) ;
+
+	DB_SMT("SRF: sending SRF at %x, len %d\n",smt,mb->sm_len) ;
+	DB_SMT("SRF: state SR%d Threshold %d\n",
+		smc->srf.sr_state,smc->srf.SRThreshold/TICKS_PER_SECOND) ;
+#ifdef	DEBUG
+	dump_smt(smc,smt,"SRF Send") ;
+#endif
+	smt_send_frame(smc,mb,FC_SMT_INFO,0) ;
+	clear_reported(smc) ;
+}
+
+#endif	/* no BOOT */
+#endif	/* no SLIM_SMT */
+