Merge branch 'fec-next'

Florian Fainelli says:

====================
net: phy: Broadcom BCM7xxx PHY workaround update

This patch sets the change to of_phy_connect() that you have seen before,
this time with the full context of why it is useful and applicable here.

Due to some design decision, the internal PHY on Broadcom BCM7xxx chips
is not entirely self contained and does not report its internal revision
through MII_PHYSID2, that is left to external PHY designs.

This forces us to get the PHY revision from the GENET and SF2 switch drivers
because those two peripherals integrate such a PHY and do contain the PHY
revision in their registers.

The approach taken here is hopefully easy to extend to similar needs for
other chips/ as well.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

3 files changed, 14 insertions, 12 deletions

diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index 3f9d4de..a12c656 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -2432,6 +2432,13 @@ static void bcmgenet_set_hw_params(struct bcmgenet_priv *priv)
 	dev_info(&priv->pdev->dev, "GENET " GENET_VER_FMT,
 		 major, (reg >> 16) & 0x0f, reg & 0xffff);
 
+	/* Store the integrated PHY revision for the MDIO probing function
+	 * to pass this information to the PHY driver. The PHY driver expects
+	 * to find the PHY major revision in bits 15:8 while the GENET register
+	 * stores that information in bits 7:0, account for that.
+	 */
+	priv->gphy_rev = (reg & 0xffff) << 8;
+
 #ifdef CONFIG_PHYS_ADDR_T_64BIT
 	if (!(params->flags & GENET_HAS_40BITS))
 		pr_warn("GENET does not support 40-bits PA\n");
diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.h b/drivers/net/ethernet/broadcom/genet/bcmgenet.h
index c862d06..ad95fe5 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.h
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.h
@@ -545,6 +545,7 @@ struct bcmgenet_priv {
 	struct phy_device *phydev;
 	struct device_node *phy_dn;
 	struct mii_bus *mii_bus;
+	u16 gphy_rev;
 
 	/* PHY device variables */
 	int old_duplex;
diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c b/drivers/net/ethernet/broadcom/genet/bcmmii.c
index c88f7ae..75b26cba 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmmii.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c
@@ -296,7 +296,7 @@ static int bcmgenet_mii_probe(struct net_device *dev)
 	struct bcmgenet_priv *priv = netdev_priv(dev);
 	struct device_node *dn = priv->pdev->dev.of_node;
 	struct phy_device *phydev;
-	unsigned int phy_flags;
+	u32 phy_flags;
 	int ret;
 
 	if (priv->phydev) {
@@ -315,8 +315,11 @@ static int bcmgenet_mii_probe(struct net_device *dev)
 		priv->phy_dn = of_node_get(dn);
 	}
 
-	phydev = of_phy_connect(dev, priv->phy_dn, bcmgenet_mii_setup, 0,
-				priv->phy_interface);
+	/* Communicate the integrated PHY revision */
+	phy_flags = priv->gphy_rev;
+
+	phydev = of_phy_connect(dev, priv->phy_dn, bcmgenet_mii_setup,
+				phy_flags, priv->phy_interface);
 	if (!phydev) {
 		pr_err("could not attach to PHY\n");
 		return -ENODEV;
@@ -338,15 +341,6 @@ static int bcmgenet_mii_probe(struct net_device *dev)
 		return ret;
 	}
 
-	phy_flags = PHY_BRCM_100MBPS_WAR;
-
-	/* workarounds are only needed for 100Mpbs PHYs, and
-	 * never on GENET V1 hardware
-	 */
-	if ((phydev->supported & PHY_GBIT_FEATURES) || GENET_IS_V1(priv))
-		phy_flags = 0;
-
-	phydev->dev_flags |= phy_flags;
 	phydev->advertising = phydev->supported;
 
 	/* The internal PHY has its link interrupts routed to the