diff options
author | Emil Tantilov <emil.s.tantilov@intel.com> | 2014-10-28 05:50:03 +0000 |
---|---|---|
committer | Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 2014-10-30 05:12:07 -0700 |
commit | e3215f0ac77ec23b052cb0bf511143038ac2ad7b (patch) | |
tree | e18762fba9a392f3127eaadc7a8200b2e5fdbeec /drivers/net/ethernet | |
parent | 4d2fcfbcf8141cdf70245a0c0612b8076f4b7e32 (diff) | |
download | op-kernel-dev-e3215f0ac77ec23b052cb0bf511143038ac2ad7b.zip op-kernel-dev-e3215f0ac77ec23b052cb0bf511143038ac2ad7b.tar.gz |
ixgbe: fix race when setting advertised speed
Following commands:
modprobe ixgbe
ifconfig ethX up
ethtool -s ethX advertise 0x020
can lead to "setup link failed with code -14" error due to the setup_link
call racing with the SFP detection routine in the watchdog.
This patch resolves this issue by protecting the setup_link call with check
for __IXGBE_IN_SFP_INIT.
Reported-by: Scott Harrison <scoharr2@cisco.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Diffstat (limited to 'drivers/net/ethernet')
-rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 4 |
1 files changed, 4 insertions, 0 deletions
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c index 3ce4a25..0ae038b 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c @@ -342,12 +342,16 @@ static int ixgbe_set_settings(struct net_device *netdev, if (old == advertised) return err; /* this sets the link speed and restarts auto-neg */ + while (test_and_set_bit(__IXGBE_IN_SFP_INIT, &adapter->state)) + usleep_range(1000, 2000); + hw->mac.autotry_restart = true; err = hw->mac.ops.setup_link(hw, advertised, true); if (err) { e_info(probe, "setup link failed with code %d\n", err); hw->mac.ops.setup_link(hw, old, true); } + clear_bit(__IXGBE_IN_SFP_INIT, &adapter->state); } else { /* in this case we currently only support 10Gb/FULL */ u32 speed = ethtool_cmd_speed(ecmd); |