Merge branch 'stmmac-flow-control'

Vince Bridgers says:

====================
stmmac: Correct flow control configuration

This series of patches corrects flow control configuration for the Synopsys
GMAC driver.

Flow control is configured based on a configurable receive fifo size. If
less than 4Kbytes flow control is left disabled and a warning is presented. If
a receive fifo size is not specified, flow control is left disabled to
maintain current behavior. Unicast pause detection was disabled, but is now
enabled. The pause time was modified to be maximum time per a XON/XOFF
flow control mode of operation.

This patch was tested on an Altera Cyclone 5 and an Altera Arria 10 devkit,
and verified that flow control operates as expected when enabled.

Please consider this series for inclusion so that flow control will
function as expected for the Synopsys GMAC controller.
====================

Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 4 insertions, 0 deletions

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index f9b42f1..705bbdf 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -181,6 +181,10 @@ static int stmmac_probe_config_dt(struct platform_device *pdev,
 				     sizeof(struct stmmac_mdio_bus_data),
 				     GFP_KERNEL);
 
+	of_property_read_u32(np, "tx-fifo-depth", &plat->tx_fifo_size);
+
+	of_property_read_u32(np, "rx-fifo-depth", &plat->rx_fifo_size);
+
 	plat->force_sf_dma_mode =
 		of_property_read_bool(np, "snps,force_sf_dma_mode");