net: vlan: rename NETIF_F_HW_VLAN_* feature flags to NETIF_F_HW_VLAN_CTAG_*

Rename the hardware VLAN acceleration features to include "CTAG" to indicate
that they only support CTAGs. Follow up patches will introduce 802.1ad
server provider tagging (STAGs) and require the distinction for hardware not
supporting acclerating both.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

3 files changed, 11 insertions, 11 deletions

diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c
index 7867aeb..af951f3 100644
--- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c
+++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c
@@ -1345,7 +1345,7 @@ netxen_setup_netdev(struct netxen_adapter *adapter,
 	}
 
 	if (adapter->capabilities & NX_FW_CAPABILITY_FVLANTX)
-		netdev->hw_features |= NETIF_F_HW_VLAN_TX;
+		netdev->hw_features |= NETIF_F_HW_VLAN_CTAG_TX;
 
 	if (adapter->capabilities & NX_FW_CAPABILITY_HW_LRO)
 		netdev->hw_features |= NETIF_F_LRO;
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
index 0d00b2b..845ba1d 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
@@ -1714,7 +1714,7 @@ qlcnic_setup_netdev(struct qlcnic_adapter *adapter, struct net_device *netdev,
 
 	netdev->features |= (NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_RXCSUM |
 			     NETIF_F_IPV6_CSUM | NETIF_F_GRO |
-			     NETIF_F_HW_VLAN_RX);
+			     NETIF_F_HW_VLAN_CTAG_RX);
 	netdev->vlan_features |= (NETIF_F_SG | NETIF_F_IP_CSUM |
 				  NETIF_F_IPV6_CSUM);
 
@@ -1729,7 +1729,7 @@ qlcnic_setup_netdev(struct qlcnic_adapter *adapter, struct net_device *netdev,
 	}
 
 	if (qlcnic_vlan_tx_check(adapter))
-		netdev->features |= (NETIF_F_HW_VLAN_TX);
+		netdev->features |= (NETIF_F_HW_VLAN_CTAG_TX);
 
 	if (adapter->ahw->capabilities & QLCNIC_FW_CAPABILITY_HW_LRO)
 		netdev->features |= NETIF_F_LRO;
diff --git a/drivers/net/ethernet/qlogic/qlge/qlge_main.c b/drivers/net/ethernet/qlogic/qlge/qlge_main.c
index 1dd778a..8e3f43c 100644
--- a/drivers/net/ethernet/qlogic/qlge/qlge_main.c
+++ b/drivers/net/ethernet/qlogic/qlge/qlge_main.c
@@ -409,7 +409,7 @@ static int ql_set_mac_addr_reg(struct ql_adapter *qdev, u8 *addr, u32 type,
 				      (qdev->
 				       func << CAM_OUT_FUNC_SHIFT) |
 					(0 << CAM_OUT_CQ_ID_SHIFT));
-			if (qdev->ndev->features & NETIF_F_HW_VLAN_RX)
+			if (qdev->ndev->features & NETIF_F_HW_VLAN_CTAG_RX)
 				cam_output |= CAM_OUT_RV;
 			/* route to NIC core */
 			ql_write32(qdev, MAC_ADDR_DATA, cam_output);
@@ -2279,7 +2279,7 @@ static void qlge_vlan_mode(struct net_device *ndev, netdev_features_t features)
 {
 	struct ql_adapter *qdev = netdev_priv(ndev);
 
-	if (features & NETIF_F_HW_VLAN_RX) {
+	if (features & NETIF_F_HW_VLAN_CTAG_RX) {
 		ql_write32(qdev, NIC_RCV_CFG, NIC_RCV_CFG_VLAN_MASK |
 				 NIC_RCV_CFG_VLAN_MATCH_AND_NON);
 	} else {
@@ -2294,10 +2294,10 @@ static netdev_features_t qlge_fix_features(struct net_device *ndev,
 	 * Since there is no support for separate rx/tx vlan accel
 	 * enable/disable make sure tx flag is always in same state as rx.
 	 */
-	if (features & NETIF_F_HW_VLAN_RX)
-		features |= NETIF_F_HW_VLAN_TX;
+	if (features & NETIF_F_HW_VLAN_CTAG_RX)
+		features |= NETIF_F_HW_VLAN_CTAG_TX;
 	else
-		features &= ~NETIF_F_HW_VLAN_TX;
+		features &= ~NETIF_F_HW_VLAN_CTAG_TX;
 
 	return features;
 }
@@ -2307,7 +2307,7 @@ static int qlge_set_features(struct net_device *ndev,
 {
 	netdev_features_t changed = ndev->features ^ features;
 
-	if (changed & NETIF_F_HW_VLAN_RX)
+	if (changed & NETIF_F_HW_VLAN_CTAG_RX)
 		qlge_vlan_mode(ndev, features);
 
 	return 0;
@@ -4665,9 +4665,9 @@ static int qlge_probe(struct pci_dev *pdev,
 	SET_NETDEV_DEV(ndev, &pdev->dev);
 	ndev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM |
 		NETIF_F_TSO | NETIF_F_TSO_ECN |
-		NETIF_F_HW_VLAN_TX | NETIF_F_RXCSUM;
+		NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_RXCSUM;
 	ndev->features = ndev->hw_features |
-		NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER;
+		NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HW_VLAN_CTAG_FILTER;
 	ndev->vlan_features = ndev->hw_features;
 
 	if (test_bit(QL_DMA64, &qdev->flags))