summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel
diff options
context:
space:
mode:
authorBruce Allan <bruce.w.allan@intel.com>2013-02-20 04:06:16 +0000
committerJeff Kirsher <jeffrey.t.kirsher@intel.com>2013-03-08 01:07:56 -0800
commit33550cecf5d22a216d497a9e1d7681537e8ffb68 (patch)
tree85e3d0dc865537d1ea3c6b08469280d0358fab25 /drivers/net/ethernet/intel
parentfc830b785b08cd8c6974850f78fa9cf221c311a8 (diff)
downloadop-kernel-dev-33550cecf5d22a216d497a9e1d7681537e8ffb68.zip
op-kernel-dev-33550cecf5d22a216d497a9e1d7681537e8ffb68.tar.gz
e1000e: cleanup unusually placed comments
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Diffstat (limited to 'drivers/net/ethernet/intel')
-rw-r--r--drivers/net/ethernet/intel/e1000e/80003es2lan.c2
-rw-r--r--drivers/net/ethernet/intel/e1000e/82571.c2
-rw-r--r--drivers/net/ethernet/intel/e1000e/e1000.h5
-rw-r--r--drivers/net/ethernet/intel/e1000e/ethtool.c15
-rw-r--r--drivers/net/ethernet/intel/e1000e/ich8lan.c2
-rw-r--r--drivers/net/ethernet/intel/e1000e/netdev.c2
-rw-r--r--drivers/net/ethernet/intel/e1000e/param.c36
7 files changed, 39 insertions, 25 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/80003es2lan.c b/drivers/net/ethernet/intel/e1000e/80003es2lan.c
index d75ace9..303aa8a 100644
--- a/drivers/net/ethernet/intel/e1000e/80003es2lan.c
+++ b/drivers/net/ethernet/intel/e1000e/80003es2lan.c
@@ -753,9 +753,9 @@ static s32 e1000_init_hw_80003es2lan(struct e1000_hw *hw)
/* Initialize identification LED */
ret_val = mac->ops.id_led_init(hw);
+ /* An error is not fatal and we should not stop init due to this */
if (ret_val)
e_dbg("Error initializing identification LED\n");
- /* This is not fatal and we should not stop init due to this */
/* Disabling VLAN filtering */
e_dbg("Initializing the IEEE VLAN\n");
diff --git a/drivers/net/ethernet/intel/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c
index 49341c0..49bce4e 100644
--- a/drivers/net/ethernet/intel/e1000e/82571.c
+++ b/drivers/net/ethernet/intel/e1000e/82571.c
@@ -1096,9 +1096,9 @@ static s32 e1000_init_hw_82571(struct e1000_hw *hw)
/* Initialize identification LED */
ret_val = mac->ops.id_led_init(hw);
+ /* An error is not fatal and we should not stop init due to this */
if (ret_val)
e_dbg("Error initializing identification LED\n");
- /* This is not fatal and we should not stop init due to this */
/* Disabling VLAN filtering */
e_dbg("Initializing the IEEE VLAN\n");
diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h
index 3ecc988..6ba1149 100644
--- a/drivers/net/ethernet/intel/e1000e/e1000.h
+++ b/drivers/net/ethernet/intel/e1000e/e1000.h
@@ -238,9 +238,8 @@ struct e1000_adapter {
u16 tx_itr;
u16 rx_itr;
- /* Tx */
- struct e1000_ring *tx_ring /* One per active queue */
- ____cacheline_aligned_in_smp;
+ /* Tx - one ring per active queue */
+ struct e1000_ring *tx_ring ____cacheline_aligned_in_smp;
u32 tx_fifo_limit;
struct napi_struct napi;
diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c
index c47dee6..9dbf5d0 100644
--- a/drivers/net/ethernet/intel/e1000e/ethtool.c
+++ b/drivers/net/ethernet/intel/e1000e/ethtool.c
@@ -812,10 +812,10 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
u32 wlock_mac = 0;
/* The status register is Read Only, so a write should fail.
- * Some bits that get toggled are ignored.
+ * Some bits that get toggled are ignored. There are several bits
+ * on newer hardware that are r/w.
*/
switch (mac->type) {
- /* there are several bits on newer hardware that are r/w */
case e1000_82571:
case e1000_82572:
case e1000_80003es2lan:
@@ -1600,8 +1600,10 @@ static int e1000_run_loopback_test(struct e1000_adapter *adapter)
k = 0;
l = 0;
- for (j = 0; j <= lc; j++) { /* loop count loop */
- for (i = 0; i < 64; i++) { /* send the packets */
+ /* loop count loop */
+ for (j = 0; j <= lc; j++) {
+ /* send the packets */
+ for (i = 0; i < 64; i++) {
buffer_info = &tx_ring->buffer_info[k];
e1000_create_lbtest_frame(buffer_info->skb, 1024);
@@ -1618,7 +1620,8 @@ static int e1000_run_loopback_test(struct e1000_adapter *adapter)
msleep(200);
time = jiffies; /* set the start time for the receive */
good_cnt = 0;
- do { /* receive the sent packets */
+ /* receive the sent packets */
+ do {
buffer_info = &rx_ring->buffer_info[l];
dma_sync_single_for_cpu(&pdev->dev,
@@ -1645,7 +1648,7 @@ static int e1000_run_loopback_test(struct e1000_adapter *adapter)
ret_val = 14; /* error code for time out error */
break;
}
- } /* end loop count loop */
+ }
return ret_val;
}
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 6ff7ff5..d249db9e4 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -3452,9 +3452,9 @@ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw)
/* Initialize identification LED */
ret_val = mac->ops.id_led_init(hw);
+ /* An error is not fatal and we should not stop init due to this */
if (ret_val)
e_dbg("Error initializing identification LED\n");
- /* This is not fatal and we should not stop init due to this */
/* Setup the receive address. */
e1000e_init_rx_addrs(hw, mac->rar_entry_count);
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 172d2e3..5337137 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -2558,8 +2558,8 @@ static void e1000_set_itr(struct e1000_adapter *adapter)
current_itr = max(adapter->rx_itr, adapter->tx_itr);
- switch (current_itr) {
/* counts and packets in update_itr are dependent on these numbers */
+ switch (current_itr) {
case lowest_latency:
new_itr = 70000;
break;
diff --git a/drivers/net/ethernet/intel/e1000e/param.c b/drivers/net/ethernet/intel/e1000e/param.c
index 39fb507..36bf39d 100644
--- a/drivers/net/ethernet/intel/e1000e/param.c
+++ b/drivers/net/ethernet/intel/e1000e/param.c
@@ -161,11 +161,13 @@ struct e1000_option {
const char *err;
int def;
union {
- struct { /* range_option info */
+ /* range_option info */
+ struct {
int min;
int max;
} r;
- struct { /* list_option info */
+ /* list_option info */
+ struct {
int nr;
struct e1000_opt_list { int i; char *str; } *p;
} l;
@@ -247,7 +249,8 @@ void e1000e_check_options(struct e1000_adapter *adapter)
"Using defaults for all values\n");
}
- { /* Transmit Interrupt Delay */
+ /* Transmit Interrupt Delay */
+ {
static const struct e1000_option opt = {
.type = range_option,
.name = "Transmit Interrupt Delay",
@@ -266,7 +269,8 @@ void e1000e_check_options(struct e1000_adapter *adapter)
adapter->tx_int_delay = opt.def;
}
}
- { /* Transmit Absolute Interrupt Delay */
+ /* Transmit Absolute Interrupt Delay */
+ {
static const struct e1000_option opt = {
.type = range_option,
.name = "Transmit Absolute Interrupt Delay",
@@ -285,7 +289,8 @@ void e1000e_check_options(struct e1000_adapter *adapter)
adapter->tx_abs_int_delay = opt.def;
}
}
- { /* Receive Interrupt Delay */
+ /* Receive Interrupt Delay */
+ {
static struct e1000_option opt = {
.type = range_option,
.name = "Receive Interrupt Delay",
@@ -304,7 +309,8 @@ void e1000e_check_options(struct e1000_adapter *adapter)
adapter->rx_int_delay = opt.def;
}
}
- { /* Receive Absolute Interrupt Delay */
+ /* Receive Absolute Interrupt Delay */
+ {
static const struct e1000_option opt = {
.type = range_option,
.name = "Receive Absolute Interrupt Delay",
@@ -323,7 +329,8 @@ void e1000e_check_options(struct e1000_adapter *adapter)
adapter->rx_abs_int_delay = opt.def;
}
}
- { /* Interrupt Throttling Rate */
+ /* Interrupt Throttling Rate */
+ {
static const struct e1000_option opt = {
.type = range_option,
.name = "Interrupt Throttling Rate (ints/sec)",
@@ -393,7 +400,8 @@ void e1000e_check_options(struct e1000_adapter *adapter)
break;
}
}
- { /* Interrupt Mode */
+ /* Interrupt Mode */
+ {
static struct e1000_option opt = {
.type = range_option,
.name = "Interrupt Mode",
@@ -436,7 +444,8 @@ void e1000e_check_options(struct e1000_adapter *adapter)
kfree(opt.err);
#endif
}
- { /* Smart Power Down */
+ /* Smart Power Down */
+ {
static const struct e1000_option opt = {
.type = enable_option,
.name = "PHY Smart Power Down",
@@ -451,7 +460,8 @@ void e1000e_check_options(struct e1000_adapter *adapter)
adapter->flags |= FLAG_SMART_POWER_DOWN;
}
}
- { /* CRC Stripping */
+ /* CRC Stripping */
+ {
static const struct e1000_option opt = {
.type = enable_option,
.name = "CRC Stripping",
@@ -471,7 +481,8 @@ void e1000e_check_options(struct e1000_adapter *adapter)
adapter->flags2 |= FLAG2_DFLT_CRC_STRIPPING;
}
}
- { /* Kumeran Lock Loss Workaround */
+ /* Kumeran Lock Loss Workaround */
+ {
static const struct e1000_option opt = {
.type = enable_option,
.name = "Kumeran Lock Loss Workaround",
@@ -490,7 +501,8 @@ void e1000e_check_options(struct e1000_adapter *adapter)
e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw,
enabled);
}
- { /* Write-protect NVM */
+ /* Write-protect NVM */
+ {
static const struct e1000_option opt = {
.type = enable_option,
.name = "Write-protect NVM",
OpenPOWER on IntegriCloud