ixgbe: implement SIOCGHWTSTAMP ioctl

This patch adds support for the new SIOCGHWTSTAMP ioctl, which enables a
process to determine the current timestamp configuration. In order to
implement this, store a copy of the timestamp configuration. In
addition, we can remove the 'int cmd' parameter as the new set_ts_config
function doesn't use it. I also fixed a typo in the function
description.

-v2
* Only save the settings after validating them

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 18 insertions, 5 deletions

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c
index 9e54fcc..9ef730f 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c
@@ -576,14 +576,21 @@ void __ixgbe_ptp_rx_hwtstamp(struct ixgbe_q_vector *q_vector,
 	shhwtstamps->hwtstamp = ns_to_ktime(ns);
 }
 
+int ixgbe_ptp_get_ts_config(struct ixgbe_adapter *adapter, struct ifreq *ifr)
+{
+	struct hwtstamp_config *config = &adapter->tstamp_config;
+
+	return copy_to_user(ifr->ifr_data, config,
+			    sizeof(*config)) ? -EFAULT : 0;
+}
+
 /**
- * ixgbe_ptp_hwtstamp_ioctl - control hardware time stamping
+ * ixgbe_ptp_set_ts_config - control hardware time stamping
  * @adapter: pointer to adapter struct
  * @ifreq: ioctl data
- * @cmd: particular ioctl requested
  *
  * Outgoing time stamping can be enabled and disabled. Play nice and
- * disable it when requested, although it shouldn't case any overhead
+ * disable it when requested, although it shouldn't cause any overhead
  * when no packet needs it. At most one packet in the queue may be
  * marked for time stamping, otherwise it would be impossible to tell
  * for sure to which packet the hardware time stamp belongs.
@@ -599,8 +606,7 @@ void __ixgbe_ptp_rx_hwtstamp(struct ixgbe_q_vector *q_vector,
  * Event mode. This more accurately tells the user what the hardware is going
  * to do anyways.
  */
-int ixgbe_ptp_hwtstamp_ioctl(struct ixgbe_adapter *adapter,
-			     struct ifreq *ifr, int cmd)
+int ixgbe_ptp_set_ts_config(struct ixgbe_adapter *adapter, struct ifreq *ifr)
 {
 	struct ixgbe_hw *hw = &adapter->hw;
 	struct hwtstamp_config config;
@@ -702,6 +708,10 @@ int ixgbe_ptp_hwtstamp_ioctl(struct ixgbe_adapter *adapter,
 	regval = IXGBE_READ_REG(hw, IXGBE_TXSTMPH);
 	regval = IXGBE_READ_REG(hw, IXGBE_RXSTMPH);
 
+	/* save these settings for future reference */
+	memcpy(&adapter->tstamp_config, &config,
+	       sizeof(adapter->tstamp_config));
+
 	return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ?
 		-EFAULT : 0;
 }
@@ -809,6 +819,9 @@ void ixgbe_ptp_reset(struct ixgbe_adapter *adapter)
 	IXGBE_WRITE_REG(hw, IXGBE_SYSTIMH, 0x00000000);
 	IXGBE_WRITE_FLUSH(hw);
 
+	/* Reset the saved tstamp_config */
+	memset(&adapter->tstamp_config, 0, sizeof(adapter->tstamp_config));
+
 	ixgbe_ptp_start_cyclecounter(adapter);
 
 	spin_lock_irqsave(&adapter->tmreg_lock, flags);