e1000e: Refactor PM flows

Refactor the system power management flows to prevent the suspend path from
being executed twice when hibernating since both the freeze and
poweroff callbacks were set to e1000_suspend() via SET_SYSTEM_SLEEP_PM_OPS.
There are HW workarounds that are performed during this flow and calling
them twice was causing erroneous behavior.

Re-arrange the code to take advantage of common code paths and explicitly
set the individual dev_pm_ops callbacks for suspend, resume, freeze,
thaw, poweroff and restore.

Add a boolean parameter (reset) to the e1000e_down function to allow
for cases when the HW should not be reset when downed during a PM event.

Now that all suspend/shutdown paths result in a call to __e1000_shutdown()
that checks Wake on Lan status, removing redundant check for WoL in
e1000_power_down_phy().

Signed-off-by: Dave Ertman <davidx.m.ertman@intel.com>
Acked-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

3 files changed, 78 insertions, 55 deletions

diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h
index 4b8e88f..129a9c3 100644
--- a/drivers/net/ethernet/intel/e1000e/e1000.h
+++ b/drivers/net/ethernet/intel/e1000e/e1000.h
@@ -469,7 +469,7 @@ void e1000e_check_options(struct e1000_adapter *adapter);
 void e1000e_set_ethtool_ops(struct net_device *netdev);
 
 int e1000e_up(struct e1000_adapter *adapter);
-void e1000e_down(struct e1000_adapter *adapter);
+void e1000e_down(struct e1000_adapter *adapter, bool reset);
 void e1000e_reinit_locked(struct e1000_adapter *adapter);
 void e1000e_reset(struct e1000_adapter *adapter);
 void e1000e_power_up_phy(struct e1000_adapter *adapter);
diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c
index 0a075f7..7a47902 100644
--- a/drivers/net/ethernet/intel/e1000e/ethtool.c
+++ b/drivers/net/ethernet/intel/e1000e/ethtool.c
@@ -325,7 +325,7 @@ static int e1000_set_settings(struct net_device *netdev,
 
 	/* reset the link */
 	if (netif_running(adapter->netdev)) {
-		e1000e_down(adapter);
+		e1000e_down(adapter, true);
 		e1000e_up(adapter);
 	} else {
 		e1000e_reset(adapter);
@@ -373,7 +373,7 @@ static int e1000_set_pauseparam(struct net_device *netdev,
 	if (adapter->fc_autoneg == AUTONEG_ENABLE) {
 		hw->fc.requested_mode = e1000_fc_default;
 		if (netif_running(adapter->netdev)) {
-			e1000e_down(adapter);
+			e1000e_down(adapter, true);
 			e1000e_up(adapter);
 		} else {
 			e1000e_reset(adapter);
@@ -719,7 +719,7 @@ static int e1000_set_ringparam(struct net_device *netdev,
 
 	pm_runtime_get_sync(netdev->dev.parent);
 
-	e1000e_down(adapter);
+	e1000e_down(adapter, true);
 
 	/* We can't just free everything and then setup again, because the
 	 * ISRs in MSI-X mode get passed pointers to the Tx and Rx ring
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index a69388c..2669fdc 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -3687,10 +3687,6 @@ void e1000e_power_up_phy(struct e1000_adapter *adapter)
  */
 static void e1000_power_down_phy(struct e1000_adapter *adapter)
 {
-	/* WoL is enabled */
-	if (adapter->wol)
-		return;
-
 	if (adapter->hw.phy.ops.power_down)
 		adapter->hw.phy.ops.power_down(&adapter->hw);
 }
@@ -3907,10 +3903,8 @@ void e1000e_reset(struct e1000_adapter *adapter)
 	}
 
 	if (!netif_running(adapter->netdev) &&
-	    !test_bit(__E1000_TESTING, &adapter->state)) {
+	    !test_bit(__E1000_TESTING, &adapter->state))
 		e1000_power_down_phy(adapter);
-		return;
-	}
 
 	e1000_get_phy_info(hw);
 
@@ -3977,7 +3971,12 @@ static void e1000e_flush_descriptors(struct e1000_adapter *adapter)
 
 static void e1000e_update_stats(struct e1000_adapter *adapter);
 
-void e1000e_down(struct e1000_adapter *adapter)
+/**
+ * e1000e_down - quiesce the device and optionally reset the hardware
+ * @adapter: board private structure
+ * @reset: boolean flag to reset the hardware or not
+ */
+void e1000e_down(struct e1000_adapter *adapter, bool reset)
 {
 	struct net_device *netdev = adapter->netdev;
 	struct e1000_hw *hw = &adapter->hw;
@@ -4031,12 +4030,8 @@ void e1000e_down(struct e1000_adapter *adapter)
 	    e1000_lv_jumbo_workaround_ich8lan(hw, false))
 		e_dbg("failed to disable jumbo frame workaround mode\n");
 
-	if (!pci_channel_offline(adapter->pdev))
+	if (reset && !pci_channel_offline(adapter->pdev))
 		e1000e_reset(adapter);
-
-	/* TODO: for power management, we could drop the link and
-	 * pci_disable_device here.
-	 */
 }
 
 void e1000e_reinit_locked(struct e1000_adapter *adapter)
@@ -4044,7 +4039,7 @@ void e1000e_reinit_locked(struct e1000_adapter *adapter)
 	might_sleep();
 	while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
 		usleep_range(1000, 2000);
-	e1000e_down(adapter);
+	e1000e_down(adapter, true);
 	e1000e_up(adapter);
 	clear_bit(__E1000_RESETTING, &adapter->state);
 }
@@ -4372,14 +4367,12 @@ static int e1000_close(struct net_device *netdev)
 	pm_runtime_get_sync(&pdev->dev);
 
 	if (!test_bit(__E1000_DOWN, &adapter->state)) {
-		e1000e_down(adapter);
+		e1000e_down(adapter, true);
 		e1000_free_irq(adapter);
 	}
 
 	napi_disable(&adapter->napi);
 
-	e1000_power_down_phy(adapter);
-
 	e1000e_free_tx_resources(adapter->tx_ring);
 	e1000e_free_rx_resources(adapter->rx_ring);
 
@@ -5686,7 +5679,7 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
 	e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu);
 	netdev->mtu = new_mtu;
 	if (netif_running(netdev))
-		e1000e_down(adapter);
+		e1000e_down(adapter, true);
 
 	/* NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
 	 * means we reserve 2 more, this pushes us to allocate from the next
@@ -5919,15 +5912,10 @@ release:
 	return retval;
 }
 
-static int __e1000_shutdown(struct pci_dev *pdev, bool runtime)
+static int e1000e_pm_freeze(struct device *dev)
 {
-	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct net_device *netdev = pci_get_drvdata(to_pci_dev(dev));
 	struct e1000_adapter *adapter = netdev_priv(netdev);
-	struct e1000_hw *hw = &adapter->hw;
-	u32 ctrl, ctrl_ext, rctl, status;
-	/* Runtime suspend should only enable wakeup for link changes */
-	u32 wufc = runtime ? E1000_WUFC_LNKC : adapter->wol;
-	int retval = 0;
 
 	netif_device_detach(netdev);
 
@@ -5938,11 +5926,29 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime)
 			usleep_range(10000, 20000);
 
 		WARN_ON(test_bit(__E1000_RESETTING, &adapter->state));
-		e1000e_down(adapter);
+
+		/* Quiesce the device without resetting the hardware */
+		e1000e_down(adapter, false);
 		e1000_free_irq(adapter);
 	}
 	e1000e_reset_interrupt_capability(adapter);
 
+	/* Allow time for pending master requests to run */
+	e1000e_disable_pcie_master(&adapter->hw);
+
+	return 0;
+}
+
+static int __e1000_shutdown(struct pci_dev *pdev, bool runtime)
+{
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+	u32 ctrl, ctrl_ext, rctl, status;
+	/* Runtime suspend should only enable wakeup for link changes */
+	u32 wufc = runtime ? E1000_WUFC_LNKC : adapter->wol;
+	int retval = 0;
+
 	status = er32(STATUS);
 	if (status & E1000_STATUS_LU)
 		wufc &= ~E1000_WUFC_LNKC;
@@ -5976,9 +5982,6 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime)
 		if (adapter->flags & FLAG_IS_ICH)
 			e1000_suspend_workarounds_ich8lan(&adapter->hw);
 
-		/* Allow time for pending master requests to run */
-		e1000e_disable_pcie_master(&adapter->hw);
-
 		if (adapter->flags2 & FLAG2_HAS_PHY_WAKEUP) {
 			/* enable wakeup by the PHY */
 			retval = e1000_init_phy_wakeup(adapter, wufc);
@@ -5992,6 +5995,8 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime)
 	} else {
 		ew32(WUC, 0);
 		ew32(WUFC, 0);
+
+		e1000_power_down_phy(adapter);
 	}
 
 	if (adapter->hw.phy.type == e1000_phy_igp_3)
@@ -6114,7 +6119,6 @@ static int __e1000_resume(struct pci_dev *pdev)
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
 	u16 aspm_disable_flag = 0;
-	u32 err;
 
 	if (adapter->flags2 & FLAG2_DISABLE_ASPM_L0S)
 		aspm_disable_flag = PCIE_LINK_STATE_L0S;
@@ -6125,13 +6129,6 @@ static int __e1000_resume(struct pci_dev *pdev)
 
 	pci_set_master(pdev);
 
-	e1000e_set_interrupt_capability(adapter);
-	if (netif_running(netdev)) {
-		err = e1000_request_irq(adapter);
-		if (err)
-			return err;
-	}
-
 	if (hw->mac.type >= e1000_pch2lan)
 		e1000_resume_workarounds_pchlan(&adapter->hw);
 
@@ -6185,24 +6182,46 @@ static int __e1000_resume(struct pci_dev *pdev)
 	return 0;
 }
 
+static int e1000e_pm_thaw(struct device *dev)
+{
+	struct net_device *netdev = pci_get_drvdata(to_pci_dev(dev));
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+
+	e1000e_set_interrupt_capability(adapter);
+	if (netif_running(netdev)) {
+		u32 err = e1000_request_irq(adapter);
+
+		if (err)
+			return err;
+
+		e1000e_up(adapter);
+	}
+
+	netif_device_attach(netdev);
+
+	return 0;
+}
+
 #ifdef CONFIG_PM_SLEEP
-static int e1000_suspend(struct device *dev)
+static int e1000e_pm_suspend(struct device *dev)
 {
 	struct pci_dev *pdev = to_pci_dev(dev);
 
+	e1000e_pm_freeze(dev);
+
 	return __e1000_shutdown(pdev, false);
 }
 
-static int e1000_resume(struct device *dev)
+static int e1000e_pm_resume(struct device *dev)
 {
 	struct pci_dev *pdev = to_pci_dev(dev);
-	struct net_device *netdev = pci_get_drvdata(pdev);
-	struct e1000_adapter *adapter = netdev_priv(netdev);
+	int rc;
 
-	if (e1000e_pm_ready(adapter))
-		adapter->idle_check = true;
+	rc = __e1000_resume(pdev);
+	if (rc)
+		return rc;
 
-	return __e1000_resume(pdev);
+	return e1000e_pm_thaw(dev);
 }
 #endif /* CONFIG_PM_SLEEP */
 
@@ -6254,6 +6273,8 @@ static int e1000_runtime_resume(struct device *dev)
 
 static void e1000_shutdown(struct pci_dev *pdev)
 {
+	e1000e_pm_freeze(&pdev->dev);
+
 	__e1000_shutdown(pdev, false);
 }
 
@@ -6339,7 +6360,7 @@ static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev,
 		return PCI_ERS_RESULT_DISCONNECT;
 
 	if (netif_running(netdev))
-		e1000e_down(adapter);
+		e1000e_down(adapter, true);
 	pci_disable_device(pdev);
 
 	/* Request a slot slot reset. */
@@ -6351,7 +6372,7 @@ static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev,
  * @pdev: Pointer to PCI device
  *
  * Restart the card from scratch, as if from a cold-boot. Implementation
- * resembles the first-half of the e1000_resume routine.
+ * resembles the first-half of the e1000e_pm_resume routine.
  */
 static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev)
 {
@@ -6398,7 +6419,7 @@ static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev)
  *
  * This callback is called when the error recovery driver tells us that
  * its OK to resume normal operation. Implementation resembles the
- * second-half of the e1000_resume routine.
+ * second-half of the e1000e_pm_resume routine.
  */
 static void e1000_io_resume(struct pci_dev *pdev)
 {
@@ -6903,9 +6924,6 @@ static void e1000_remove(struct pci_dev *pdev)
 		}
 	}
 
-	if (!(netdev->flags & IFF_UP))
-		e1000_power_down_phy(adapter);
-
 	/* Don't lie to e1000_close() down the road. */
 	if (!down)
 		clear_bit(__E1000_DOWN, &adapter->state);
@@ -7027,7 +7045,12 @@ static DEFINE_PCI_DEVICE_TABLE(e1000_pci_tbl) = {
 MODULE_DEVICE_TABLE(pci, e1000_pci_tbl);
 
 static const struct dev_pm_ops e1000_pm_ops = {
-	SET_SYSTEM_SLEEP_PM_OPS(e1000_suspend, e1000_resume)
+	.suspend	= e1000e_pm_suspend,
+	.resume		= e1000e_pm_resume,
+	.freeze		= e1000e_pm_freeze,
+	.thaw		= e1000e_pm_thaw,
+	.poweroff	= e1000e_pm_suspend,
+	.restore	= e1000e_pm_resume,
 	SET_RUNTIME_PM_OPS(e1000_runtime_suspend, e1000_runtime_resume,
 			   e1000_idle)
 };