tulip: dmfe: Fix global namespace pollution of phy accessors.

The dmfe driver has "phy_read()" and "phy_write()" functions, which
we need to rename because the generic phy layer is about to export
generic interfaces with the same name.

Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 76 insertions, 76 deletions

diff --git a/drivers/net/ethernet/dec/tulip/dmfe.c b/drivers/net/ethernet/dec/tulip/dmfe.c
index 322213d..c820560 100644
--- a/drivers/net/ethernet/dec/tulip/dmfe.c
+++ b/drivers/net/ethernet/dec/tulip/dmfe.c
@@ -328,10 +328,10 @@ static void allocate_rx_buffer(struct net_device *);
 static void update_cr6(u32, void __iomem *);
 static void send_filter_frame(struct DEVICE *);
 static void dm9132_id_table(struct DEVICE *);
-static u16 phy_read(void __iomem *, u8, u8, u32);
-static void phy_write(void __iomem *, u8, u8, u16, u32);
-static void phy_write_1bit(void __iomem *, u32);
-static u16 phy_read_1bit(void __iomem *);
+static u16 dmfe_phy_read(void __iomem *, u8, u8, u32);
+static void dmfe_phy_write(void __iomem *, u8, u8, u16, u32);
+static void dmfe_phy_write_1bit(void __iomem *, u32);
+static u16 dmfe_phy_read_1bit(void __iomem *);
 static u8 dmfe_sense_speed(struct dmfe_board_info *);
 static void dmfe_process_mode(struct dmfe_board_info *);
 static void dmfe_timer(unsigned long);
@@ -770,7 +770,7 @@ static int dmfe_stop(struct DEVICE *dev)
 	/* Reset & stop DM910X board */
 	dw32(DCR0, DM910X_RESET);
 	udelay(100);
-	phy_write(ioaddr, db->phy_addr, 0, 0x8000, db->chip_id);
+	dmfe_phy_write(ioaddr, db->phy_addr, 0, 0x8000, db->chip_id);
 
 	/* free interrupt */
 	free_irq(db->pdev->irq, dev);
@@ -1154,7 +1154,7 @@ static void dmfe_timer(unsigned long data)
 		if (db->chip_type && (db->chip_id==PCI_DM9102_ID)) {
 			db->cr6_data &= ~0x40000;
 			update_cr6(db->cr6_data, ioaddr);
-			phy_write(ioaddr, db->phy_addr, 0, 0x1000, db->chip_id);
+			dmfe_phy_write(ioaddr, db->phy_addr, 0, 0x1000, db->chip_id);
 			db->cr6_data |= 0x40000;
 			update_cr6(db->cr6_data, ioaddr);
 			db->timer.expires = DMFE_TIMER_WUT + HZ * 2;
@@ -1230,9 +1230,9 @@ static void dmfe_timer(unsigned long data)
 	*/
 
 	/* need a dummy read because of PHY's register latch*/
-	phy_read (db->ioaddr, db->phy_addr, 1, db->chip_id);
-	link_ok_phy = (phy_read (db->ioaddr,
-		       db->phy_addr, 1, db->chip_id) & 0x4) ? 1 : 0;
+	dmfe_phy_read (db->ioaddr, db->phy_addr, 1, db->chip_id);
+	link_ok_phy = (dmfe_phy_read (db->ioaddr,
+				      db->phy_addr, 1, db->chip_id) & 0x4) ? 1 : 0;
 
 	if (link_ok_phy != link_ok) {
 		DMFE_DBUG (0, "PHY and chip report different link status", 0);
@@ -1247,8 +1247,8 @@ static void dmfe_timer(unsigned long data)
 		/* For Force 10/100M Half/Full mode: Enable Auto-Nego mode */
 		/* AUTO or force 1M Homerun/Longrun don't need */
 		if ( !(db->media_mode & 0x38) )
-			phy_write(db->ioaddr, db->phy_addr,
-				  0, 0x1000, db->chip_id);
+			dmfe_phy_write(db->ioaddr, db->phy_addr,
+				       0, 0x1000, db->chip_id);
 
 		/* AUTO mode, if INT phyxcer link failed, select EXT device */
 		if (db->media_mode & DMFE_AUTO) {
@@ -1649,16 +1649,16 @@ static u8 dmfe_sense_speed(struct dmfe_board_info *db)
 	/* CR6 bit18=0, select 10/100M */
 	update_cr6(db->cr6_data & ~0x40000, ioaddr);
 
-	phy_mode = phy_read(db->ioaddr, db->phy_addr, 1, db->chip_id);
-	phy_mode = phy_read(db->ioaddr, db->phy_addr, 1, db->chip_id);
+	phy_mode = dmfe_phy_read(db->ioaddr, db->phy_addr, 1, db->chip_id);
+	phy_mode = dmfe_phy_read(db->ioaddr, db->phy_addr, 1, db->chip_id);
 
 	if ( (phy_mode & 0x24) == 0x24 ) {
 		if (db->chip_id == PCI_DM9132_ID)	/* DM9132 */
-			phy_mode = phy_read(db->ioaddr,
-				    db->phy_addr, 7, db->chip_id) & 0xf000;
+			phy_mode = dmfe_phy_read(db->ioaddr,
+						 db->phy_addr, 7, db->chip_id) & 0xf000;
 		else 				/* DM9102/DM9102A */
-			phy_mode = phy_read(db->ioaddr,
-				    db->phy_addr, 17, db->chip_id) & 0xf000;
+			phy_mode = dmfe_phy_read(db->ioaddr,
+						 db->phy_addr, 17, db->chip_id) & 0xf000;
 		switch (phy_mode) {
 		case 0x1000: db->op_mode = DMFE_10MHF; break;
 		case 0x2000: db->op_mode = DMFE_10MFD; break;
@@ -1695,15 +1695,15 @@ static void dmfe_set_phyxcer(struct dmfe_board_info *db)
 
 	/* DM9009 Chip: Phyxcer reg18 bit12=0 */
 	if (db->chip_id == PCI_DM9009_ID) {
-		phy_reg = phy_read(db->ioaddr,
-				   db->phy_addr, 18, db->chip_id) & ~0x1000;
+		phy_reg = dmfe_phy_read(db->ioaddr,
+					db->phy_addr, 18, db->chip_id) & ~0x1000;
 
-		phy_write(db->ioaddr,
-			  db->phy_addr, 18, phy_reg, db->chip_id);
+		dmfe_phy_write(db->ioaddr,
+			       db->phy_addr, 18, phy_reg, db->chip_id);
 	}
 
 	/* Phyxcer capability setting */
-	phy_reg = phy_read(db->ioaddr, db->phy_addr, 4, db->chip_id) & ~0x01e0;
+	phy_reg = dmfe_phy_read(db->ioaddr, db->phy_addr, 4, db->chip_id) & ~0x01e0;
 
 	if (db->media_mode & DMFE_AUTO) {
 		/* AUTO Mode */
@@ -1724,13 +1724,13 @@ static void dmfe_set_phyxcer(struct dmfe_board_info *db)
 		phy_reg|=db->PHY_reg4;
 		db->media_mode|=DMFE_AUTO;
 	}
-	phy_write(db->ioaddr, db->phy_addr, 4, phy_reg, db->chip_id);
+	dmfe_phy_write(db->ioaddr, db->phy_addr, 4, phy_reg, db->chip_id);
 
  	/* Restart Auto-Negotiation */
 	if ( db->chip_type && (db->chip_id == PCI_DM9102_ID) )
-		phy_write(db->ioaddr, db->phy_addr, 0, 0x1800, db->chip_id);
+		dmfe_phy_write(db->ioaddr, db->phy_addr, 0, 0x1800, db->chip_id);
 	if ( !db->chip_type )
-		phy_write(db->ioaddr, db->phy_addr, 0, 0x1200, db->chip_id);
+		dmfe_phy_write(db->ioaddr, db->phy_addr, 0, 0x1200, db->chip_id);
 }
 
 
@@ -1762,7 +1762,7 @@ static void dmfe_process_mode(struct dmfe_board_info *db)
 	/* 10/100M phyxcer force mode need */
 	if ( !(db->media_mode & 0x18)) {
 		/* Forece Mode */
-		phy_reg = phy_read(db->ioaddr, db->phy_addr, 6, db->chip_id);
+		phy_reg = dmfe_phy_read(db->ioaddr, db->phy_addr, 6, db->chip_id);
 		if ( !(phy_reg & 0x1) ) {
 			/* parter without N-Way capability */
 			phy_reg = 0x0;
@@ -1772,12 +1772,12 @@ static void dmfe_process_mode(struct dmfe_board_info *db)
 			case DMFE_100MHF: phy_reg = 0x2000; break;
 			case DMFE_100MFD: phy_reg = 0x2100; break;
 			}
-			phy_write(db->ioaddr,
-				  db->phy_addr, 0, phy_reg, db->chip_id);
+			dmfe_phy_write(db->ioaddr,
+				       db->phy_addr, 0, phy_reg, db->chip_id);
        			if ( db->chip_type && (db->chip_id == PCI_DM9102_ID) )
 				mdelay(20);
-			phy_write(db->ioaddr,
-				  db->phy_addr, 0, phy_reg, db->chip_id);
+			dmfe_phy_write(db->ioaddr,
+				       db->phy_addr, 0, phy_reg, db->chip_id);
 		}
 	}
 }
@@ -1787,8 +1787,8 @@ static void dmfe_process_mode(struct dmfe_board_info *db)
  *	Write a word to Phy register
  */
 
-static void phy_write(void __iomem *ioaddr, u8 phy_addr, u8 offset,
-		      u16 phy_data, u32 chip_id)
+static void dmfe_phy_write(void __iomem *ioaddr, u8 phy_addr, u8 offset,
+			   u16 phy_data, u32 chip_id)
 {
 	u16 i;
 
@@ -1799,34 +1799,34 @@ static void phy_write(void __iomem *ioaddr, u8 phy_addr, u8 offset,
 
 		/* Send 33 synchronization clock to Phy controller */
 		for (i = 0; i < 35; i++)
-			phy_write_1bit(ioaddr, PHY_DATA_1);
+			dmfe_phy_write_1bit(ioaddr, PHY_DATA_1);
 
 		/* Send start command(01) to Phy */
-		phy_write_1bit(ioaddr, PHY_DATA_0);
-		phy_write_1bit(ioaddr, PHY_DATA_1);
+		dmfe_phy_write_1bit(ioaddr, PHY_DATA_0);
+		dmfe_phy_write_1bit(ioaddr, PHY_DATA_1);
 
 		/* Send write command(01) to Phy */
-		phy_write_1bit(ioaddr, PHY_DATA_0);
-		phy_write_1bit(ioaddr, PHY_DATA_1);
+		dmfe_phy_write_1bit(ioaddr, PHY_DATA_0);
+		dmfe_phy_write_1bit(ioaddr, PHY_DATA_1);
 
 		/* Send Phy address */
 		for (i = 0x10; i > 0; i = i >> 1)
-			phy_write_1bit(ioaddr,
-				       phy_addr & i ? PHY_DATA_1 : PHY_DATA_0);
+			dmfe_phy_write_1bit(ioaddr,
+					    phy_addr & i ? PHY_DATA_1 : PHY_DATA_0);
 
 		/* Send register address */
 		for (i = 0x10; i > 0; i = i >> 1)
-			phy_write_1bit(ioaddr,
-				       offset & i ? PHY_DATA_1 : PHY_DATA_0);
+			dmfe_phy_write_1bit(ioaddr,
+					    offset & i ? PHY_DATA_1 : PHY_DATA_0);
 
 		/* written trasnition */
-		phy_write_1bit(ioaddr, PHY_DATA_1);
-		phy_write_1bit(ioaddr, PHY_DATA_0);
+		dmfe_phy_write_1bit(ioaddr, PHY_DATA_1);
+		dmfe_phy_write_1bit(ioaddr, PHY_DATA_0);
 
 		/* Write a word data to PHY controller */
 		for ( i = 0x8000; i > 0; i >>= 1)
-			phy_write_1bit(ioaddr,
-				       phy_data & i ? PHY_DATA_1 : PHY_DATA_0);
+			dmfe_phy_write_1bit(ioaddr,
+					    phy_data & i ? PHY_DATA_1 : PHY_DATA_0);
 	}
 }
 
@@ -1835,7 +1835,7 @@ static void phy_write(void __iomem *ioaddr, u8 phy_addr, u8 offset,
  *	Read a word data from phy register
  */
 
-static u16 phy_read(void __iomem *ioaddr, u8 phy_addr, u8 offset, u32 chip_id)
+static u16 dmfe_phy_read(void __iomem *ioaddr, u8 phy_addr, u8 offset, u32 chip_id)
 {
 	int i;
 	u16 phy_data;
@@ -1848,33 +1848,33 @@ static u16 phy_read(void __iomem *ioaddr, u8 phy_addr, u8 offset, u32 chip_id)
 
 		/* Send 33 synchronization clock to Phy controller */
 		for (i = 0; i < 35; i++)
-			phy_write_1bit(ioaddr, PHY_DATA_1);
+			dmfe_phy_write_1bit(ioaddr, PHY_DATA_1);
 
 		/* Send start command(01) to Phy */
-		phy_write_1bit(ioaddr, PHY_DATA_0);
-		phy_write_1bit(ioaddr, PHY_DATA_1);
+		dmfe_phy_write_1bit(ioaddr, PHY_DATA_0);
+		dmfe_phy_write_1bit(ioaddr, PHY_DATA_1);
 
 		/* Send read command(10) to Phy */
-		phy_write_1bit(ioaddr, PHY_DATA_1);
-		phy_write_1bit(ioaddr, PHY_DATA_0);
+		dmfe_phy_write_1bit(ioaddr, PHY_DATA_1);
+		dmfe_phy_write_1bit(ioaddr, PHY_DATA_0);
 
 		/* Send Phy address */
 		for (i = 0x10; i > 0; i = i >> 1)
-			phy_write_1bit(ioaddr,
-				       phy_addr & i ? PHY_DATA_1 : PHY_DATA_0);
+			dmfe_phy_write_1bit(ioaddr,
+					    phy_addr & i ? PHY_DATA_1 : PHY_DATA_0);
 
 		/* Send register address */
 		for (i = 0x10; i > 0; i = i >> 1)
-			phy_write_1bit(ioaddr,
-				       offset & i ? PHY_DATA_1 : PHY_DATA_0);
+			dmfe_phy_write_1bit(ioaddr,
+					    offset & i ? PHY_DATA_1 : PHY_DATA_0);
 
 		/* Skip transition state */
-		phy_read_1bit(ioaddr);
+		dmfe_phy_read_1bit(ioaddr);
 
 		/* read 16bit data */
 		for (phy_data = 0, i = 0; i < 16; i++) {
 			phy_data <<= 1;
-			phy_data |= phy_read_1bit(ioaddr);
+			phy_data |= dmfe_phy_read_1bit(ioaddr);
 		}
 	}
 
@@ -1886,7 +1886,7 @@ static u16 phy_read(void __iomem *ioaddr, u8 phy_addr, u8 offset, u32 chip_id)
  *	Write one bit data to Phy Controller
  */
 
-static void phy_write_1bit(void __iomem *ioaddr, u32 phy_data)
+static void dmfe_phy_write_1bit(void __iomem *ioaddr, u32 phy_data)
 {
 	dw32(DCR9, phy_data);		/* MII Clock Low */
 	udelay(1);
@@ -1901,7 +1901,7 @@ static void phy_write_1bit(void __iomem *ioaddr, u32 phy_data)
  *	Read one bit phy data from PHY controller
  */
 
-static u16 phy_read_1bit(void __iomem *ioaddr)
+static u16 dmfe_phy_read_1bit(void __iomem *ioaddr)
 {
 	u16 phy_data;
 
@@ -1995,11 +1995,11 @@ static void dmfe_parse_srom(struct dmfe_board_info * db)
 	/* Check DM9801 or DM9802 present or not */
 	db->HPNA_present = 0;
 	update_cr6(db->cr6_data | 0x40000, db->ioaddr);
-	tmp_reg = phy_read(db->ioaddr, db->phy_addr, 3, db->chip_id);
+	tmp_reg = dmfe_phy_read(db->ioaddr, db->phy_addr, 3, db->chip_id);
 	if ( ( tmp_reg & 0xfff0 ) == 0xb900 ) {
 		/* DM9801 or DM9802 present */
 		db->HPNA_timer = 8;
-		if ( phy_read(db->ioaddr, db->phy_addr, 31, db->chip_id) == 0x4404) {
+		if ( dmfe_phy_read(db->ioaddr, db->phy_addr, 31, db->chip_id) == 0x4404) {
 			/* DM9801 HomeRun */
 			db->HPNA_present = 1;
 			dmfe_program_DM9801(db, tmp_reg);
@@ -2025,29 +2025,29 @@ static void dmfe_program_DM9801(struct dmfe_board_info * db, int HPNA_rev)
 	switch(HPNA_rev) {
 	case 0xb900: /* DM9801 E3 */
 		db->HPNA_command |= 0x1000;
-		reg25 = phy_read(db->ioaddr, db->phy_addr, 24, db->chip_id);
+		reg25 = dmfe_phy_read(db->ioaddr, db->phy_addr, 24, db->chip_id);
 		reg25 = ( (reg25 + HPNA_NoiseFloor) & 0xff) | 0xf000;
-		reg17 = phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id);
+		reg17 = dmfe_phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id);
 		break;
 	case 0xb901: /* DM9801 E4 */
-		reg25 = phy_read(db->ioaddr, db->phy_addr, 25, db->chip_id);
+		reg25 = dmfe_phy_read(db->ioaddr, db->phy_addr, 25, db->chip_id);
 		reg25 = (reg25 & 0xff00) + HPNA_NoiseFloor;
-		reg17 = phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id);
+		reg17 = dmfe_phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id);
 		reg17 = (reg17 & 0xfff0) + HPNA_NoiseFloor + 3;
 		break;
 	case 0xb902: /* DM9801 E5 */
 	case 0xb903: /* DM9801 E6 */
 	default:
 		db->HPNA_command |= 0x1000;
-		reg25 = phy_read(db->ioaddr, db->phy_addr, 25, db->chip_id);
+		reg25 = dmfe_phy_read(db->ioaddr, db->phy_addr, 25, db->chip_id);
 		reg25 = (reg25 & 0xff00) + HPNA_NoiseFloor - 5;
-		reg17 = phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id);
+		reg17 = dmfe_phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id);
 		reg17 = (reg17 & 0xfff0) + HPNA_NoiseFloor;
 		break;
 	}
-	phy_write(db->ioaddr, db->phy_addr, 16, db->HPNA_command, db->chip_id);
-	phy_write(db->ioaddr, db->phy_addr, 17, reg17, db->chip_id);
-	phy_write(db->ioaddr, db->phy_addr, 25, reg25, db->chip_id);
+	dmfe_phy_write(db->ioaddr, db->phy_addr, 16, db->HPNA_command, db->chip_id);
+	dmfe_phy_write(db->ioaddr, db->phy_addr, 17, reg17, db->chip_id);
+	dmfe_phy_write(db->ioaddr, db->phy_addr, 25, reg25, db->chip_id);
 }
 
 
@@ -2060,10 +2060,10 @@ static void dmfe_program_DM9802(struct dmfe_board_info * db)
 	uint phy_reg;
 
 	if ( !HPNA_NoiseFloor ) HPNA_NoiseFloor = DM9802_NOISE_FLOOR;
-	phy_write(db->ioaddr, db->phy_addr, 16, db->HPNA_command, db->chip_id);
-	phy_reg = phy_read(db->ioaddr, db->phy_addr, 25, db->chip_id);
+	dmfe_phy_write(db->ioaddr, db->phy_addr, 16, db->HPNA_command, db->chip_id);
+	phy_reg = dmfe_phy_read(db->ioaddr, db->phy_addr, 25, db->chip_id);
 	phy_reg = ( phy_reg & 0xff00) + HPNA_NoiseFloor;
-	phy_write(db->ioaddr, db->phy_addr, 25, phy_reg, db->chip_id);
+	dmfe_phy_write(db->ioaddr, db->phy_addr, 25, phy_reg, db->chip_id);
 }
 
 
@@ -2077,7 +2077,7 @@ static void dmfe_HPNA_remote_cmd_chk(struct dmfe_board_info * db)
 	uint phy_reg;
 
 	/* Got remote device status */
-	phy_reg = phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id) & 0x60;
+	phy_reg = dmfe_phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id) & 0x60;
 	switch(phy_reg) {
 	case 0x00: phy_reg = 0x0a00;break; /* LP/LS */
 	case 0x20: phy_reg = 0x0900;break; /* LP/HS */
@@ -2087,8 +2087,8 @@ static void dmfe_HPNA_remote_cmd_chk(struct dmfe_board_info * db)
 
 	/* Check remote device status match our setting ot not */
 	if ( phy_reg != (db->HPNA_command & 0x0f00) ) {
-		phy_write(db->ioaddr, db->phy_addr, 16, db->HPNA_command,
-			  db->chip_id);
+		dmfe_phy_write(db->ioaddr, db->phy_addr, 16, db->HPNA_command,
+			       db->chip_id);
 		db->HPNA_timer=8;
 	} else
 		db->HPNA_timer=600;	/* Match, every 10 minutes, check */