diff options
author | Yaniv Rosner <yanivr@broadcom.com> | 2013-09-28 08:46:11 +0300 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2013-09-28 15:24:03 -0700 |
commit | 7dc950ca590cecb379048eb2581273023afc1796 (patch) | |
tree | 175ae3c842b3bf43fe51f8f5a15c87339decf457 /drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | |
parent | d67710ffcc37f96b34ce2af85e19600265655bb3 (diff) | |
download | op-kernel-dev-7dc950ca590cecb379048eb2581273023afc1796.zip op-kernel-dev-7dc950ca590cecb379048eb2581273023afc1796.tar.gz |
bnx2x: Add support for EXTPHY2 LED mode
Add new LED mode for the BCM848xx to support new board type.
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c')
-rw-r--r-- | drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 20 |
1 files changed, 17 insertions, 3 deletions
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index 92112e2..c60cf43 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -6344,9 +6344,15 @@ int bnx2x_set_led(struct link_params *params, * intended override. */ break; - } else + } else { + u32 nig_led_mode = ((params->hw_led_mode << + SHARED_HW_CFG_LED_MODE_SHIFT) == + SHARED_HW_CFG_LED_EXTPHY2) ? + (SHARED_HW_CFG_LED_PHY1 >> + SHARED_HW_CFG_LED_MODE_SHIFT) : hw_led_mode; REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, - hw_led_mode); + nig_led_mode); + } REG_WR(bp, NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0 + port*4, 0); /* Set blinking rate to ~15.9Hz */ @@ -10608,10 +10614,18 @@ static void bnx2x_848xx_set_link_led(struct bnx2x_phy *phy, 0x40); } else { + /* EXTPHY2 LED mode indicate that the 100M/1G/10G LED + * sources are all wired through LED1, rather than only + * 10G in other modes. + */ + val = ((params->hw_led_mode << + SHARED_HW_CFG_LED_MODE_SHIFT) == + SHARED_HW_CFG_LED_EXTPHY2) ? 0x98 : 0x80; + bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_8481_LED1_MASK, - 0x80); + val); /* Tell LED3 to blink on source */ bnx2x_cl45_read(bp, phy, |