bfin_mac: Move the Analog Devices Inc driver

Move the Analog Devices Inc driver into drivers/net/ethernet/adi/ and
make the necessary Kconfig and Makefile changes.

CC: <uclinux-dist-devel@blackfin.uclinux.org>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Bob Liu <bob.liu@analog.com>

4 files changed, 1946 insertions, 0 deletions

diff --git a/drivers/net/ethernet/adi/Kconfig b/drivers/net/ethernet/adi/Kconfig
new file mode 100644
index 0000000..6de9851
--- /dev/null
+++ b/drivers/net/ethernet/adi/Kconfig
@@ -0,0 +1,68 @@
+#
+# Blackfin device configuration
+#
+
+config NET_BFIN
+	bool "Blackfin devices"
+	depends on BF516 || BF518 || BF526 || BF527 || BF536 || BF537
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y.
+	  Make sure you know the name of your card. Read the Ethernet-HOWTO,
+	  available from <http://www.tldp.org/docs.html#howto>.
+
+	  If unsure, say Y.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the remaining Blackfin card questions. If you say Y, you will be
+	  asked for your specific card in the following questions.
+
+if NET_BFIN
+
+config BFIN_MAC
+	tristate "Blackfin on-chip MAC support"
+	depends on (BF516 || BF518 || BF526 || BF527 || BF536 || BF537)
+	select CRC32
+	select MII
+	select PHYLIB
+	select BFIN_MAC_USE_L1 if DMA_UNCACHED_NONE
+	---help---
+	  This is the driver for Blackfin on-chip mac device. Say Y if you want
+	  it compiled into the kernel. This driver is also available as a
+	  module ( = code which can be inserted in and removed from the running
+	  kernel whenever you want). The module will be called bfin_mac.
+
+config BFIN_MAC_USE_L1
+	bool "Use L1 memory for rx/tx packets"
+	depends on BFIN_MAC && (BF527 || BF537)
+	default y
+	---help---
+	  To get maximum network performance, you should use L1 memory as rx/tx
+	  buffers. Say N here if you want to reserve L1 memory for other uses.
+
+config BFIN_TX_DESC_NUM
+	int "Number of transmit buffer packets"
+	depends on BFIN_MAC
+	range 6 10 if BFIN_MAC_USE_L1
+	range 10 100
+	default "10"
+	---help---
+	  Set the number of buffer packets used in driver.
+
+config BFIN_RX_DESC_NUM
+	int "Number of receive buffer packets"
+	depends on BFIN_MAC
+	range 20 100 if BFIN_MAC_USE_L1
+	range 20 800
+	default "20"
+	---help---
+	  Set the number of buffer packets used in driver.
+
+config BFIN_MAC_USE_HWSTAMP
+	bool "Use IEEE 1588 hwstamp"
+	depends on BFIN_MAC && BF518
+	default y
+	---help---
+	  To support the IEEE 1588 Precision Time Protocol (PTP), select y here
+
+endif # NET_BFIN
diff --git a/drivers/net/ethernet/adi/Makefile b/drivers/net/ethernet/adi/Makefile
new file mode 100644
index 0000000..b1fbe19
--- /dev/null
+++ b/drivers/net/ethernet/adi/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Blackfin device drivers.
+#
+
+obj-$(CONFIG_BFIN_MAC) += bfin_mac.o
diff --git a/drivers/net/ethernet/adi/bfin_mac.c b/drivers/net/ethernet/adi/bfin_mac.c
new file mode 100644
index 0000000..6c019e1
--- /dev/null
+++ b/drivers/net/ethernet/adi/bfin_mac.c
@@ -0,0 +1,1767 @@
+/*
+ * Blackfin On-Chip MAC Driver
+ *
+ * Copyright 2004-2010 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#define DRV_VERSION	"1.1"
+#define DRV_DESC	"Blackfin on-chip Ethernet MAC driver"
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/errno.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/crc32.h>
+#include <linux/device.h>
+#include <linux/spinlock.h>
+#include <linux/mii.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/skbuff.h>
+#include <linux/platform_device.h>
+
+#include <asm/dma.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/div64.h>
+#include <asm/dpmc.h>
+#include <asm/blackfin.h>
+#include <asm/cacheflush.h>
+#include <asm/portmux.h>
+#include <mach/pll.h>
+
+#include "bfin_mac.h"
+
+MODULE_AUTHOR("Bryan Wu, Luke Yang");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION(DRV_DESC);
+MODULE_ALIAS("platform:bfin_mac");
+
+#if defined(CONFIG_BFIN_MAC_USE_L1)
+# define bfin_mac_alloc(dma_handle, size, num)  l1_data_sram_zalloc(size*num)
+# define bfin_mac_free(dma_handle, ptr, num)    l1_data_sram_free(ptr)
+#else
+# define bfin_mac_alloc(dma_handle, size, num) \
+	dma_alloc_coherent(NULL, size*num, dma_handle, GFP_KERNEL)
+# define bfin_mac_free(dma_handle, ptr, num) \
+	dma_free_coherent(NULL, sizeof(*ptr)*num, ptr, dma_handle)
+#endif
+
+#define PKT_BUF_SZ 1580
+
+#define MAX_TIMEOUT_CNT	500
+
+/* pointers to maintain transmit list */
+static struct net_dma_desc_tx *tx_list_head;
+static struct net_dma_desc_tx *tx_list_tail;
+static struct net_dma_desc_rx *rx_list_head;
+static struct net_dma_desc_rx *rx_list_tail;
+static struct net_dma_desc_rx *current_rx_ptr;
+static struct net_dma_desc_tx *current_tx_ptr;
+static struct net_dma_desc_tx *tx_desc;
+static struct net_dma_desc_rx *rx_desc;
+
+static void desc_list_free(void)
+{
+	struct net_dma_desc_rx *r;
+	struct net_dma_desc_tx *t;
+	int i;
+#if !defined(CONFIG_BFIN_MAC_USE_L1)
+	dma_addr_t dma_handle = 0;
+#endif
+
+	if (tx_desc) {
+		t = tx_list_head;
+		for (i = 0; i < CONFIG_BFIN_TX_DESC_NUM; i++) {
+			if (t) {
+				if (t->skb) {
+					dev_kfree_skb(t->skb);
+					t->skb = NULL;
+				}
+				t = t->next;
+			}
+		}
+		bfin_mac_free(dma_handle, tx_desc, CONFIG_BFIN_TX_DESC_NUM);
+	}
+
+	if (rx_desc) {
+		r = rx_list_head;
+		for (i = 0; i < CONFIG_BFIN_RX_DESC_NUM; i++) {
+			if (r) {
+				if (r->skb) {
+					dev_kfree_skb(r->skb);
+					r->skb = NULL;
+				}
+				r = r->next;
+			}
+		}
+		bfin_mac_free(dma_handle, rx_desc, CONFIG_BFIN_RX_DESC_NUM);
+	}
+}
+
+static int desc_list_init(void)
+{
+	int i;
+	struct sk_buff *new_skb;
+#if !defined(CONFIG_BFIN_MAC_USE_L1)
+	/*
+	 * This dma_handle is useless in Blackfin dma_alloc_coherent().
+	 * The real dma handler is the return value of dma_alloc_coherent().
+	 */
+	dma_addr_t dma_handle;
+#endif
+
+	tx_desc = bfin_mac_alloc(&dma_handle,
+				sizeof(struct net_dma_desc_tx),
+				CONFIG_BFIN_TX_DESC_NUM);
+	if (tx_desc == NULL)
+		goto init_error;
+
+	rx_desc = bfin_mac_alloc(&dma_handle,
+				sizeof(struct net_dma_desc_rx),
+				CONFIG_BFIN_RX_DESC_NUM);
+	if (rx_desc == NULL)
+		goto init_error;
+
+	/* init tx_list */
+	tx_list_head = tx_list_tail = tx_desc;
+
+	for (i = 0; i < CONFIG_BFIN_TX_DESC_NUM; i++) {
+		struct net_dma_desc_tx *t = tx_desc + i;
+		struct dma_descriptor *a = &(t->desc_a);
+		struct dma_descriptor *b = &(t->desc_b);
+
+		/*
+		 * disable DMA
+		 * read from memory WNR = 0
+		 * wordsize is 32 bits
+		 * 6 half words is desc size
+		 * large desc flow
+		 */
+		a->config = WDSIZE_32 | NDSIZE_6 | DMAFLOW_LARGE;
+		a->start_addr = (unsigned long)t->packet;
+		a->x_count = 0;
+		a->next_dma_desc = b;
+
+		/*
+		 * enabled DMA
+		 * write to memory WNR = 1
+		 * wordsize is 32 bits
+		 * disable interrupt
+		 * 6 half words is desc size
+		 * large desc flow
+		 */
+		b->config = DMAEN | WNR | WDSIZE_32 | NDSIZE_6 | DMAFLOW_LARGE;
+		b->start_addr = (unsigned long)(&(t->status));
+		b->x_count = 0;
+
+		t->skb = NULL;
+		tx_list_tail->desc_b.next_dma_desc = a;
+		tx_list_tail->next = t;
+		tx_list_tail = t;
+	}
+	tx_list_tail->next = tx_list_head;	/* tx_list is a circle */
+	tx_list_tail->desc_b.next_dma_desc = &(tx_list_head->desc_a);
+	current_tx_ptr = tx_list_head;
+
+	/* init rx_list */
+	rx_list_head = rx_list_tail = rx_desc;
+
+	for (i = 0; i < CONFIG_BFIN_RX_DESC_NUM; i++) {
+		struct net_dma_desc_rx *r = rx_desc + i;
+		struct dma_descriptor *a = &(r->desc_a);
+		struct dma_descriptor *b = &(r->desc_b);
+
+		/* allocate a new skb for next time receive */
+		new_skb = dev_alloc_skb(PKT_BUF_SZ + NET_IP_ALIGN);
+		if (!new_skb) {
+			pr_notice("init: low on mem - packet dropped\n");
+			goto init_error;
+		}
+		skb_reserve(new_skb, NET_IP_ALIGN);
+		/* Invidate the data cache of skb->data range when it is write back
+		 * cache. It will prevent overwritting the new data from DMA
+		 */
+		blackfin_dcache_invalidate_range((unsigned long)new_skb->head,
+					 (unsigned long)new_skb->end);
+		r->skb = new_skb;
+
+		/*
+		 * enabled DMA
+		 * write to memory WNR = 1
+		 * wordsize is 32 bits
+		 * disable interrupt
+		 * 6 half words is desc size
+		 * large desc flow
+		 */
+		a->config = DMAEN | WNR | WDSIZE_32 | NDSIZE_6 | DMAFLOW_LARGE;
+		/* since RXDWA is enabled */
+		a->start_addr = (unsigned long)new_skb->data - 2;
+		a->x_count = 0;
+		a->next_dma_desc = b;
+
+		/*
+		 * enabled DMA
+		 * write to memory WNR = 1
+		 * wordsize is 32 bits
+		 * enable interrupt
+		 * 6 half words is desc size
+		 * large desc flow
+		 */
+		b->config = DMAEN | WNR | WDSIZE_32 | DI_EN |
+				NDSIZE_6 | DMAFLOW_LARGE;
+		b->start_addr = (unsigned long)(&(r->status));
+		b->x_count = 0;
+
+		rx_list_tail->desc_b.next_dma_desc = a;
+		rx_list_tail->next = r;
+		rx_list_tail = r;
+	}
+	rx_list_tail->next = rx_list_head;	/* rx_list is a circle */
+	rx_list_tail->desc_b.next_dma_desc = &(rx_list_head->desc_a);
+	current_rx_ptr = rx_list_head;
+
+	return 0;
+
+init_error:
+	desc_list_free();
+	pr_err("kmalloc failed\n");
+	return -ENOMEM;
+}
+
+
+/*---PHY CONTROL AND CONFIGURATION-----------------------------------------*/
+
+/*
+ * MII operations
+ */
+/* Wait until the previous MDC/MDIO transaction has completed */
+static int bfin_mdio_poll(void)
+{
+	int timeout_cnt = MAX_TIMEOUT_CNT;
+
+	/* poll the STABUSY bit */
+	while ((bfin_read_EMAC_STAADD()) & STABUSY) {
+		udelay(1);
+		if (timeout_cnt-- < 0) {
+			pr_err("wait MDC/MDIO transaction to complete timeout\n");
+			return -ETIMEDOUT;
+		}
+	}
+
+	return 0;
+}
+
+/* Read an off-chip register in a PHY through the MDC/MDIO port */
+static int bfin_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum)
+{
+	int ret;
+
+	ret = bfin_mdio_poll();
+	if (ret)
+		return ret;
+
+	/* read mode */
+	bfin_write_EMAC_STAADD(SET_PHYAD((u16) phy_addr) |
+				SET_REGAD((u16) regnum) |
+				STABUSY);
+
+	ret = bfin_mdio_poll();
+	if (ret)
+		return ret;
+
+	return (int) bfin_read_EMAC_STADAT();
+}
+
+/* Write an off-chip register in a PHY through the MDC/MDIO port */
+static int bfin_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum,
+			      u16 value)
+{
+	int ret;
+
+	ret = bfin_mdio_poll();
+	if (ret)
+		return ret;
+
+	bfin_write_EMAC_STADAT((u32) value);
+
+	/* write mode */
+	bfin_write_EMAC_STAADD(SET_PHYAD((u16) phy_addr) |
+				SET_REGAD((u16) regnum) |
+				STAOP |
+				STABUSY);
+
+	return bfin_mdio_poll();
+}
+
+static int bfin_mdiobus_reset(struct mii_bus *bus)
+{
+	return 0;
+}
+
+static void bfin_mac_adjust_link(struct net_device *dev)
+{
+	struct bfin_mac_local *lp = netdev_priv(dev);
+	struct phy_device *phydev = lp->phydev;
+	unsigned long flags;
+	int new_state = 0;
+
+	spin_lock_irqsave(&lp->lock, flags);
+	if (phydev->link) {
+		/* Now we make sure that we can be in full duplex mode.
+		 * If not, we operate in half-duplex mode. */
+		if (phydev->duplex != lp->old_duplex) {
+			u32 opmode = bfin_read_EMAC_OPMODE();
+			new_state = 1;
+
+			if (phydev->duplex)
+				opmode |= FDMODE;
+			else
+				opmode &= ~(FDMODE);
+
+			bfin_write_EMAC_OPMODE(opmode);
+			lp->old_duplex = phydev->duplex;
+		}
+
+		if (phydev->speed != lp->old_speed) {
+			if (phydev->interface == PHY_INTERFACE_MODE_RMII) {
+				u32 opmode = bfin_read_EMAC_OPMODE();
+				switch (phydev->speed) {
+				case 10:
+					opmode |= RMII_10;
+					break;
+				case 100:
+					opmode &= ~RMII_10;
+					break;
+				default:
+					netdev_warn(dev,
+						"Ack! Speed (%d) is not 10/100!\n",
+						phydev->speed);
+					break;
+				}
+				bfin_write_EMAC_OPMODE(opmode);
+			}
+
+			new_state = 1;
+			lp->old_speed = phydev->speed;
+		}
+
+		if (!lp->old_link) {
+			new_state = 1;
+			lp->old_link = 1;
+		}
+	} else if (lp->old_link) {
+		new_state = 1;
+		lp->old_link = 0;
+		lp->old_speed = 0;
+		lp->old_duplex = -1;
+	}
+
+	if (new_state) {
+		u32 opmode = bfin_read_EMAC_OPMODE();
+		phy_print_status(phydev);
+		pr_debug("EMAC_OPMODE = 0x%08x\n", opmode);
+	}
+
+	spin_unlock_irqrestore(&lp->lock, flags);
+}
+
+/* MDC  = 2.5 MHz */
+#define MDC_CLK 2500000
+
+static int mii_probe(struct net_device *dev, int phy_mode)
+{
+	struct bfin_mac_local *lp = netdev_priv(dev);
+	struct phy_device *phydev = NULL;
+	unsigned short sysctl;
+	int i;
+	u32 sclk, mdc_div;
+
+	/* Enable PHY output early */
+	if (!(bfin_read_VR_CTL() & CLKBUFOE))
+		bfin_write_VR_CTL(bfin_read_VR_CTL() | CLKBUFOE);
+
+	sclk = get_sclk();
+	mdc_div = ((sclk / MDC_CLK) / 2) - 1;
+
+	sysctl = bfin_read_EMAC_SYSCTL();
+	sysctl = (sysctl & ~MDCDIV) | SET_MDCDIV(mdc_div);
+	bfin_write_EMAC_SYSCTL(sysctl);
+
+	/* search for connected PHY device */
+	for (i = 0; i < PHY_MAX_ADDR; ++i) {
+		struct phy_device *const tmp_phydev = lp->mii_bus->phy_map[i];
+
+		if (!tmp_phydev)
+			continue; /* no PHY here... */
+
+		phydev = tmp_phydev;
+		break; /* found it */
+	}
+
+	/* now we are supposed to have a proper phydev, to attach to... */
+	if (!phydev) {
+		netdev_err(dev, "no phy device found\n");
+		return -ENODEV;
+	}
+
+	if (phy_mode != PHY_INTERFACE_MODE_RMII &&
+		phy_mode != PHY_INTERFACE_MODE_MII) {
+		netdev_err(dev, "invalid phy interface mode\n");
+		return -EINVAL;
+	}
+
+	phydev = phy_connect(dev, dev_name(&phydev->dev), &bfin_mac_adjust_link,
+			0, phy_mode);
+
+	if (IS_ERR(phydev)) {
+		netdev_err(dev, "could not attach PHY\n");
+		return PTR_ERR(phydev);
+	}
+
+	/* mask with MAC supported features */
+	phydev->supported &= (SUPPORTED_10baseT_Half
+			      | SUPPORTED_10baseT_Full
+			      | SUPPORTED_100baseT_Half
+			      | SUPPORTED_100baseT_Full
+			      | SUPPORTED_Autoneg
+			      | SUPPORTED_Pause | SUPPORTED_Asym_Pause
+			      | SUPPORTED_MII
+			      | SUPPORTED_TP);
+
+	phydev->advertising = phydev->supported;
+
+	lp->old_link = 0;
+	lp->old_speed = 0;
+	lp->old_duplex = -1;
+	lp->phydev = phydev;
+
+	pr_info("attached PHY driver [%s] "
+	        "(mii_bus:phy_addr=%s, irq=%d, mdc_clk=%dHz(mdc_div=%d)@sclk=%dMHz)\n",
+	        phydev->drv->name, dev_name(&phydev->dev), phydev->irq,
+	        MDC_CLK, mdc_div, sclk/1000000);
+
+	return 0;
+}
+
+/*
+ * Ethtool support
+ */
+
+/*
+ * interrupt routine for magic packet wakeup
+ */
+static irqreturn_t bfin_mac_wake_interrupt(int irq, void *dev_id)
+{
+	return IRQ_HANDLED;
+}
+
+static int
+bfin_mac_ethtool_getsettings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	struct bfin_mac_local *lp = netdev_priv(dev);
+
+	if (lp->phydev)
+		return phy_ethtool_gset(lp->phydev, cmd);
+
+	return -EINVAL;
+}
+
+static int
+bfin_mac_ethtool_setsettings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	struct bfin_mac_local *lp = netdev_priv(dev);
+
+	if (!capable(CAP_NET_ADMIN))
+		return -EPERM;
+
+	if (lp->phydev)
+		return phy_ethtool_sset(lp->phydev, cmd);
+
+	return -EINVAL;
+}
+
+static void bfin_mac_ethtool_getdrvinfo(struct net_device *dev,
+					struct ethtool_drvinfo *info)
+{
+	strcpy(info->driver, KBUILD_MODNAME);
+	strcpy(info->version, DRV_VERSION);
+	strcpy(info->fw_version, "N/A");
+	strcpy(info->bus_info, dev_name(&dev->dev));
+}
+
+static void bfin_mac_ethtool_getwol(struct net_device *dev,
+	struct ethtool_wolinfo *wolinfo)
+{
+	struct bfin_mac_local *lp = netdev_priv(dev);
+
+	wolinfo->supported = WAKE_MAGIC;
+	wolinfo->wolopts = lp->wol;
+}
+
+static int bfin_mac_ethtool_setwol(struct net_device *dev,
+	struct ethtool_wolinfo *wolinfo)
+{
+	struct bfin_mac_local *lp = netdev_priv(dev);
+	int rc;
+
+	if (wolinfo->wolopts & (WAKE_MAGICSECURE |
+				WAKE_UCAST |
+				WAKE_MCAST |
+				WAKE_BCAST |
+				WAKE_ARP))
+		return -EOPNOTSUPP;
+
+	lp->wol = wolinfo->wolopts;
+
+	if (lp->wol && !lp->irq_wake_requested) {
+		/* register wake irq handler */
+		rc = request_irq(IRQ_MAC_WAKEDET, bfin_mac_wake_interrupt,
+				 IRQF_DISABLED, "EMAC_WAKE", dev);
+		if (rc)
+			return rc;
+		lp->irq_wake_requested = true;
+	}
+
+	if (!lp->wol && lp->irq_wake_requested) {
+		free_irq(IRQ_MAC_WAKEDET, dev);
+		lp->irq_wake_requested = false;
+	}
+
+	/* Make sure the PHY driver doesn't suspend */
+	device_init_wakeup(&dev->dev, lp->wol);
+
+	return 0;
+}
+
+static const struct ethtool_ops bfin_mac_ethtool_ops = {
+	.get_settings = bfin_mac_ethtool_getsettings,
+	.set_settings = bfin_mac_ethtool_setsettings,
+	.get_link = ethtool_op_get_link,
+	.get_drvinfo = bfin_mac_ethtool_getdrvinfo,
+	.get_wol = bfin_mac_ethtool_getwol,
+	.set_wol = bfin_mac_ethtool_setwol,
+};
+
+/**************************************************************************/
+static void setup_system_regs(struct net_device *dev)
+{
+	struct bfin_mac_local *lp = netdev_priv(dev);
+	int i;
+	unsigned short sysctl;
+
+	/*
+	 * Odd word alignment for Receive Frame DMA word
+	 * Configure checksum support and rcve frame word alignment
+	 */
+	sysctl = bfin_read_EMAC_SYSCTL();
+	/*
+	 * check if interrupt is requested for any PHY,
+	 * enable PHY interrupt only if needed
+	 */
+	for (i = 0; i < PHY_MAX_ADDR; ++i)
+		if (lp->mii_bus->irq[i] != PHY_POLL)
+			break;
+	if (i < PHY_MAX_ADDR)
+		sysctl |= PHYIE;
+	sysctl |= RXDWA;
+#if defined(BFIN_MAC_CSUM_OFFLOAD)
+	sysctl |= RXCKS;
+#else
+	sysctl &= ~RXCKS;
+#endif
+	bfin_write_EMAC_SYSCTL(sysctl);
+
+	bfin_write_EMAC_MMC_CTL(RSTC | CROLL);
+
+	/* Set vlan regs to let 1522 bytes long packets pass through */
+	bfin_write_EMAC_VLAN1(lp->vlan1_mask);
+	bfin_write_EMAC_VLAN2(lp->vlan2_mask);
+
+	/* Initialize the TX DMA channel registers */
+	bfin_write_DMA2_X_COUNT(0);
+	bfin_write_DMA2_X_MODIFY(4);
+	bfin_write_DMA2_Y_COUNT(0);
+	bfin_write_DMA2_Y_MODIFY(0);
+
+	/* Initialize the RX DMA channel registers */
+	bfin_write_DMA1_X_COUNT(0);
+	bfin_write_DMA1_X_MODIFY(4);
+	bfin_write_DMA1_Y_COUNT(0);
+	bfin_write_DMA1_Y_MODIFY(0);
+}
+
+static void setup_mac_addr(u8 *mac_addr)
+{
+	u32 addr_low = le32_to_cpu(*(__le32 *) & mac_addr[0]);
+	u16 addr_hi = le16_to_cpu(*(__le16 *) & mac_addr[4]);
+
+	/* this depends on a little-endian machine */
+	bfin_write_EMAC_ADDRLO(addr_low);
+	bfin_write_EMAC_ADDRHI(addr_hi);
+}
+
+static int bfin_mac_set_mac_address(struct net_device *dev, void *p)
+{
+	struct sockaddr *addr = p;
+	if (netif_running(dev))
+		return -EBUSY;
+	memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+	setup_mac_addr(dev->dev_addr);
+	return 0;
+}
+
+#ifdef CONFIG_BFIN_MAC_USE_HWSTAMP
+#define bfin_mac_hwtstamp_is_none(cfg) ((cfg) == HWTSTAMP_FILTER_NONE)
+
+static int bfin_mac_hwtstamp_ioctl(struct net_device *netdev,
+		struct ifreq *ifr, int cmd)
+{
+	struct hwtstamp_config config;
+	struct bfin_mac_local *lp = netdev_priv(netdev);
+	u16 ptpctl;
+	u32 ptpfv1, ptpfv2, ptpfv3, ptpfoff;
+
+	if (copy_from_user(&config, ifr->ifr_data, sizeof(config)))
+		return -EFAULT;
+
+	pr_debug("%s config flag:0x%x, tx_type:0x%x, rx_filter:0x%x\n",
+			__func__, config.flags, config.tx_type, config.rx_filter);
+
+	/* reserved for future extensions */
+	if (config.flags)
+		return -EINVAL;
+
+	if ((config.tx_type != HWTSTAMP_TX_OFF) &&
+			(config.tx_type != HWTSTAMP_TX_ON))
+		return -ERANGE;
+
+	ptpctl = bfin_read_EMAC_PTP_CTL();
+
+	switch (config.rx_filter) {
+	case HWTSTAMP_FILTER_NONE:
+		/*
+		 * Dont allow any timestamping
+		 */
+		ptpfv3 = 0xFFFFFFFF;
+		bfin_write_EMAC_PTP_FV3(ptpfv3);
+		break;
+	case HWTSTAMP_FILTER_PTP_V1_L4_EVENT:
+	case HWTSTAMP_FILTER_PTP_V1_L4_SYNC:
+	case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ:
+		/*
+		 * Clear the five comparison mask bits (bits[12:8]) in EMAC_PTP_CTL)
+		 * to enable all the field matches.
+		 */
+		ptpctl &= ~0x1F00;
+		bfin_write_EMAC_PTP_CTL(ptpctl);
+		/*
+		 * Keep the default values of the EMAC_PTP_FOFF register.
+		 */
+		ptpfoff = 0x4A24170C;
+		bfin_write_EMAC_PTP_FOFF(ptpfoff);
+		/*
+		 * Keep the default values of the EMAC_PTP_FV1 and EMAC_PTP_FV2
+		 * registers.
+		 */
+		ptpfv1 = 0x11040800;
+		bfin_write_EMAC_PTP_FV1(ptpfv1);
+		ptpfv2 = 0x0140013F;
+		bfin_write_EMAC_PTP_FV2(ptpfv2);
+		/*
+		 * The default value (0xFFFC) allows the timestamping of both
+		 * received Sync messages and Delay_Req messages.
+		 */
+		ptpfv3 = 0xFFFFFFFC;
+		bfin_write_EMAC_PTP_FV3(ptpfv3);
+
+		config.rx_filter = HWTSTAMP_FILTER_PTP_V1_L4_EVENT;
+		break;
+	case HWTSTAMP_FILTER_PTP_V2_L4_EVENT:
+	case HWTSTAMP_FILTER_PTP_V2_L4_SYNC:
+	case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ:
+		/* Clear all five comparison mask bits (bits[12:8]) in the
+		 * EMAC_PTP_CTL register to enable all the field matches.
+		 */
+		ptpctl &= ~0x1F00;
+		bfin_write_EMAC_PTP_CTL(ptpctl);
+		/*
+		 * Keep the default values of the EMAC_PTP_FOFF register, except set
+		 * the PTPCOF field to 0x2A.
+		 */
+		ptpfoff = 0x2A24170C;
+		bfin_write_EMAC_PTP_FOFF(ptpfoff);
+		/*
+		 * Keep the default values of the EMAC_PTP_FV1 and EMAC_PTP_FV2
+		 * registers.
+		 */
+		ptpfv1 = 0x11040800;
+		bfin_write_EMAC_PTP_FV1(ptpfv1);
+		ptpfv2 = 0x0140013F;
+		bfin_write_EMAC_PTP_FV2(ptpfv2);
+		/*
+		 * To allow the timestamping of Pdelay_Req and Pdelay_Resp, set
+		 * the value to 0xFFF0.
+		 */
+		ptpfv3 = 0xFFFFFFF0;
+		bfin_write_EMAC_PTP_FV3(ptpfv3);
+
+		config.rx_filter = HWTSTAMP_FILTER_PTP_V2_L4_EVENT;
+		break;
+	case HWTSTAMP_FILTER_PTP_V2_L2_EVENT:
+	case HWTSTAMP_FILTER_PTP_V2_L2_SYNC:
+	case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ:
+		/*
+		 * Clear bits 8 and 12 of the EMAC_PTP_CTL register to enable only the
+		 * EFTM and PTPCM field comparison.
+		 */
+		ptpctl &= ~0x1100;
+		bfin_write_EMAC_PTP_CTL(ptpctl);
+		/*
+		 * Keep the default values of all the fields of the EMAC_PTP_FOFF
+		 * register, except set the PTPCOF field to 0x0E.
+		 */
+		ptpfoff = 0x0E24170C;
+		bfin_write_EMAC_PTP_FOFF(ptpfoff);
+		/*
+		 * Program bits [15:0] of the EMAC_PTP_FV1 register to 0x88F7, which
+		 * corresponds to PTP messages on the MAC layer.
+		 */
+		ptpfv1 = 0x110488F7;
+		bfin_write_EMAC_PTP_FV1(ptpfv1);
+		ptpfv2 = 0x0140013F;
+		bfin_write_EMAC_PTP_FV2(ptpfv2);
+		/*
+		 * To allow the timestamping of Pdelay_Req and Pdelay_Resp
+		 * messages, set the value to 0xFFF0.
+		 */
+		ptpfv3 = 0xFFFFFFF0;
+		bfin_write_EMAC_PTP_FV3(ptpfv3);
+
+		config.rx_filter = HWTSTAMP_FILTER_PTP_V2_L2_EVENT;
+		break;
+	default:
+		return -ERANGE;
+	}
+
+	if (config.tx_type == HWTSTAMP_TX_OFF &&
+	    bfin_mac_hwtstamp_is_none(config.rx_filter)) {
+		ptpctl &= ~PTP_EN;
+		bfin_write_EMAC_PTP_CTL(ptpctl);
+
+		SSYNC();
+	} else {
+		ptpctl |= PTP_EN;
+		bfin_write_EMAC_PTP_CTL(ptpctl);
+
+		/*
+		 * clear any existing timestamp
+		 */
+		bfin_read_EMAC_PTP_RXSNAPLO();
+		bfin_read_EMAC_PTP_RXSNAPHI();
+
+		bfin_read_EMAC_PTP_TXSNAPLO();
+		bfin_read_EMAC_PTP_TXSNAPHI();
+
+		/*
+		 * Set registers so that rollover occurs soon to test this.
+		 */
+		bfin_write_EMAC_PTP_TIMELO(0x00000000);
+		bfin_write_EMAC_PTP_TIMEHI(0xFF800000);
+
+		SSYNC();
+
+		lp->compare.last_update = 0;
+		timecounter_init(&lp->clock,
+				&lp->cycles,
+				ktime_to_ns(ktime_get_real()));
+		timecompare_update(&lp->compare, 0);
+	}
+
+	lp->stamp_cfg = config;
+	return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ?
+		-EFAULT : 0;
+}
+
+static void bfin_dump_hwtamp(char *s, ktime_t *hw, ktime_t *ts, struct timecompare *cmp)
+{
+	ktime_t sys = ktime_get_real();
+
+	pr_debug("%s %s hardware:%d,%d transform system:%d,%d system:%d,%d, cmp:%lld, %lld\n",
+			__func__, s, hw->tv.sec, hw->tv.nsec, ts->tv.sec, ts->tv.nsec, sys.tv.sec,
+			sys.tv.nsec, cmp->offset, cmp->skew);
+}
+
+static void bfin_tx_hwtstamp(struct net_device *netdev, struct sk_buff *skb)
+{
+	struct bfin_mac_local *lp = netdev_priv(netdev);
+
+	if (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) {
+		int timeout_cnt = MAX_TIMEOUT_CNT;
+
+		/* When doing time stamping, keep the connection to the socket
+		 * a while longer
+		 */
+		skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
+
+		/*
+		 * The timestamping is done at the EMAC module's MII/RMII interface
+		 * when the module sees the Start of Frame of an event message packet. This
+		 * interface is the closest possible place to the physical Ethernet transmission
+		 * medium, providing the best timing accuracy.
+		 */
+		while ((!(bfin_read_EMAC_PTP_ISTAT() & TXTL)) && (--timeout_cnt))
+			udelay(1);
+		if (timeout_cnt == 0)
+			netdev_err(netdev, "timestamp the TX packet failed\n");
+		else {
+			struct skb_shared_hwtstamps shhwtstamps;
+			u64 ns;
+			u64 regval;
+
+			regval = bfin_read_EMAC_PTP_TXSNAPLO();
+			regval |= (u64)bfin_read_EMAC_PTP_TXSNAPHI() << 32;
+			memset(&shhwtstamps, 0, sizeof(shhwtstamps));
+			ns = timecounter_cyc2time(&lp->clock,
+					regval);
+			timecompare_update(&lp->compare, ns);
+			shhwtstamps.hwtstamp = ns_to_ktime(ns);
+			shhwtstamps.syststamp =
+				timecompare_transform(&lp->compare, ns);
+			skb_tstamp_tx(skb, &shhwtstamps);
+
+			bfin_dump_hwtamp("TX", &shhwtstamps.hwtstamp, &shhwtstamps.syststamp, &lp->compare);
+		}
+	}
+}
+
+static void bfin_rx_hwtstamp(struct net_device *netdev, struct sk_buff *skb)
+{
+	struct bfin_mac_local *lp = netdev_priv(netdev);
+	u32 valid;
+	u64 regval, ns;
+	struct skb_shared_hwtstamps *shhwtstamps;
+
+	if (bfin_mac_hwtstamp_is_none(lp->stamp_cfg.rx_filter))
+		return;
+
+	valid = bfin_read_EMAC_PTP_ISTAT() & RXEL;
+	if (!valid)
+		return;
+
+	shhwtstamps = skb_hwtstamps(skb);
+
+	regval = bfin_read_EMAC_PTP_RXSNAPLO();
+	regval |= (u64)bfin_read_EMAC_PTP_RXSNAPHI() << 32;
+	ns = timecounter_cyc2time(&lp->clock, regval);
+	timecompare_update(&lp->compare, ns);
+	memset(shhwtstamps, 0, sizeof(*shhwtstamps));
+	shhwtstamps->hwtstamp = ns_to_ktime(ns);
+	shhwtstamps->syststamp = timecompare_transform(&lp->compare, ns);
+
+	bfin_dump_hwtamp("RX", &shhwtstamps->hwtstamp, &shhwtstamps->syststamp, &lp->compare);
+}
+
+/*
+ * bfin_read_clock - read raw cycle counter (to be used by time counter)
+ */
+static cycle_t bfin_read_clock(const struct cyclecounter *tc)
+{
+	u64 stamp;
+
+	stamp =  bfin_read_EMAC_PTP_TIMELO();
+	stamp |= (u64)bfin_read_EMAC_PTP_TIMEHI() << 32ULL;
+
+	return stamp;
+}
+
+#define PTP_CLK 25000000
+
+static void bfin_mac_hwtstamp_init(struct net_device *netdev)
+{
+	struct bfin_mac_local *lp = netdev_priv(netdev);
+	u64 append;
+
+	/* Initialize hardware timer */
+	append = PTP_CLK * (1ULL << 32);
+	do_div(append, get_sclk());
+	bfin_write_EMAC_PTP_ADDEND((u32)append);
+
+	memset(&lp->cycles, 0, sizeof(lp->cycles));
+	lp->cycles.read = bfin_read_clock;
+	lp->cycles.mask = CLOCKSOURCE_MASK(64);
+	lp->cycles.mult = 1000000000 / PTP_CLK;
+	lp->cycles.shift = 0;
+
+	/* Synchronize our NIC clock against system wall clock */
+	memset(&lp->compare, 0, sizeof(lp->compare));
+	lp->compare.source = &lp->clock;
+	lp->compare.target = ktime_get_real;
+	lp->compare.num_samples = 10;
+
+	/* Initialize hwstamp config */
+	lp->stamp_cfg.rx_filter = HWTSTAMP_FILTER_NONE;
+	lp->stamp_cfg.tx_type = HWTSTAMP_TX_OFF;
+}
+
+#else
+# define bfin_mac_hwtstamp_is_none(cfg) 0
+# define bfin_mac_hwtstamp_init(dev)
+# define bfin_mac_hwtstamp_ioctl(dev, ifr, cmd) (-EOPNOTSUPP)
+# define bfin_rx_hwtstamp(dev, skb)
+# define bfin_tx_hwtstamp(dev, skb)
+#endif
+
+static inline void _tx_reclaim_skb(void)
+{
+	do {
+		tx_list_head->desc_a.config &= ~DMAEN;
+		tx_list_head->status.status_word = 0;
+		if (tx_list_head->skb) {
+			dev_kfree_skb(tx_list_head->skb);
+			tx_list_head->skb = NULL;
+		}
+		tx_list_head = tx_list_head->next;
+
+	} while (tx_list_head->status.status_word != 0);
+}
+
+static void tx_reclaim_skb(struct bfin_mac_local *lp)
+{
+	int timeout_cnt = MAX_TIMEOUT_CNT;
+
+	if (tx_list_head->status.status_word != 0)
+		_tx_reclaim_skb();
+
+	if (current_tx_ptr->next == tx_list_head) {
+		while (tx_list_head->status.status_word == 0) {
+			/* slow down polling to avoid too many queue stop. */
+			udelay(10);
+			/* reclaim skb if DMA is not running. */
+			if (!(bfin_read_DMA2_IRQ_STATUS() & DMA_RUN))
+				break;
+			if (timeout_cnt-- < 0)
+				break;
+		}
+
+		if (timeout_cnt >= 0)
+			_tx_reclaim_skb();
+		else
+			netif_stop_queue(lp->ndev);
+	}
+
+	if (current_tx_ptr->next != tx_list_head &&
+		netif_queue_stopped(lp->ndev))
+		netif_wake_queue(lp->ndev);
+
+	if (tx_list_head != current_tx_ptr) {
+		/* shorten the timer interval if tx queue is stopped */
+		if (netif_queue_stopped(lp->ndev))
+			lp->tx_reclaim_timer.expires =
+				jiffies + (TX_RECLAIM_JIFFIES >> 4);
+		else
+			lp->tx_reclaim_timer.expires =
+				jiffies + TX_RECLAIM_JIFFIES;
+
+		mod_timer(&lp->tx_reclaim_timer,
+			lp->tx_reclaim_timer.expires);
+	}
+
+	return;
+}
+
+static void tx_reclaim_skb_timeout(unsigned long lp)
+{
+	tx_reclaim_skb((struct bfin_mac_local *)lp);
+}
+
+static int bfin_mac_hard_start_xmit(struct sk_buff *skb,
+				struct net_device *dev)
+{
+	struct bfin_mac_local *lp = netdev_priv(dev);
+	u16 *data;
+	u32 data_align = (unsigned long)(skb->data) & 0x3;
+
+	current_tx_ptr->skb = skb;
+
+	if (data_align == 0x2) {
+		/* move skb->data to current_tx_ptr payload */
+		data = (u16 *)(skb->data) - 1;
+		*data = (u16)(skb->len);
+		/*
+		 * When transmitting an Ethernet packet, the PTP_TSYNC module requires
+		 * a DMA_Length_Word field associated with the packet. The lower 12 bits
+		 * of this field are the length of the packet payload in bytes and the higher
+		 * 4 bits are the timestamping enable field.
+		 */
+		if (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)
+			*data |= 0x1000;
+
+		current_tx_ptr->desc_a.start_addr = (u32)data;
+		/* this is important! */
+		blackfin_dcache_flush_range((u32)data,
+				(u32)((u8 *)data + skb->len + 4));
+	} else {
+		*((u16 *)(current_tx_ptr->packet)) = (u16)(skb->len);
+		/* enable timestamping for the sent packet */
+		if (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)
+			*((u16 *)(current_tx_ptr->packet)) |= 0x1000;
+		memcpy((u8 *)(current_tx_ptr->packet + 2), skb->data,
+			skb->len);
+		current_tx_ptr->desc_a.start_addr =
+			(u32)current_tx_ptr->packet;
+		blackfin_dcache_flush_range(
+			(u32)current_tx_ptr->packet,
+			(u32)(current_tx_ptr->packet + skb->len + 2));
+	}
+
+	/* make sure the internal data buffers in the core are drained
+	 * so that the DMA descriptors are completely written when the
+	 * DMA engine goes to fetch them below
+	 */
+	SSYNC();
+
+	/* always clear status buffer before start tx dma */
+	current_tx_ptr->status.status_word = 0;
+
+	/* enable this packet's dma */
+	current_tx_ptr->desc_a.config |= DMAEN;
+
+	/* tx dma is running, just return */
+	if (bfin_read_DMA2_IRQ_STATUS() & DMA_RUN)
+		goto out;
+
+	/* tx dma is not running */
+	bfin_write_DMA2_NEXT_DESC_PTR(&(current_tx_ptr->desc_a));
+	/* dma enabled, read from memory, size is 6 */
+	bfin_write_DMA2_CONFIG(current_tx_ptr->desc_a.config);
+	/* Turn on the EMAC tx */
+	bfin_write_EMAC_OPMODE(bfin_read_EMAC_OPMODE() | TE);
+
+out:
+	bfin_tx_hwtstamp(dev, skb);
+
+	current_tx_ptr = current_tx_ptr->next;
+	dev->stats.tx_packets++;
+	dev->stats.tx_bytes += (skb->len);
+
+	tx_reclaim_skb(lp);
+
+	return NETDEV_TX_OK;
+}
+
+#define IP_HEADER_OFF  0
+#define RX_ERROR_MASK (RX_LONG | RX_ALIGN | RX_CRC | RX_LEN | \
+	RX_FRAG | RX_ADDR | RX_DMAO | RX_PHY | RX_LATE | RX_RANGE)
+
+static void bfin_mac_rx(struct net_device *dev)
+{
+	struct sk_buff *skb, *new_skb;
+	unsigned short len;
+	struct bfin_mac_local *lp __maybe_unused = netdev_priv(dev);
+#if defined(BFIN_MAC_CSUM_OFFLOAD)
+	unsigned int i;
+	unsigned char fcs[ETH_FCS_LEN + 1];
+#endif
+
+	/* check if frame status word reports an error condition
+	 * we which case we simply drop the packet
+	 */
+	if (current_rx_ptr->status.status_word & RX_ERROR_MASK) {
+		netdev_notice(dev, "rx: receive error - packet dropped\n");
+		dev->stats.rx_dropped++;
+		goto out;
+	}
+
+	/* allocate a new skb for next time receive */
+	skb = current_rx_ptr->skb;
+
+	new_skb = dev_alloc_skb(PKT_BUF_SZ + NET_IP_ALIGN);
+	if (!new_skb) {
+		netdev_notice(dev, "rx: low on mem - packet dropped\n");
+		dev->stats.rx_dropped++;
+		goto out;
+	}
+	/* reserve 2 bytes for RXDWA padding */
+	skb_reserve(new_skb, NET_IP_ALIGN);
+	/* Invidate the data cache of skb->data range when it is write back
+	 * cache. It will prevent overwritting the new data from DMA
+	 */
+	blackfin_dcache_invalidate_range((unsigned long)new_skb->head,
+					 (unsigned long)new_skb->end);
+
+	current_rx_ptr->skb = new_skb;
+	current_rx_ptr->desc_a.start_addr = (unsigned long)new_skb->data - 2;
+
+	len = (unsigned short)((current_rx_ptr->status.status_word) & RX_FRLEN);
+	/* Deduce Ethernet FCS length from Ethernet payload length */
+	len -= ETH_FCS_LEN;
+	skb_put(skb, len);
+
+	skb->protocol = eth_type_trans(skb, dev);
+
+	bfin_rx_hwtstamp(dev, skb);
+
+#if defined(BFIN_MAC_CSUM_OFFLOAD)
+	/* Checksum offloading only works for IPv4 packets with the standard IP header
+	 * length of 20 bytes, because the blackfin MAC checksum calculation is
+	 * based on that assumption. We must NOT use the calculated checksum if our
+	 * IP version or header break that assumption.
+	 */
+	if (skb->data[IP_HEADER_OFF] == 0x45) {
+		skb->csum = current_rx_ptr->status.ip_payload_csum;
+		/*
+		 * Deduce Ethernet FCS from hardware generated IP payload checksum.
+		 * IP checksum is based on 16-bit one's complement algorithm.
+		 * To deduce a value from checksum is equal to add its inversion.
+		 * If the IP payload len is odd, the inversed FCS should also
+		 * begin from odd address and leave first byte zero.
+		 */
+		if (skb->len % 2) {
+			fcs[0] = 0;
+			for (i = 0; i < ETH_FCS_LEN; i++)
+				fcs[i + 1] = ~skb->data[skb->len + i];
+			skb->csum = csum_partial(fcs, ETH_FCS_LEN + 1, skb->csum);
+		} else {
+			for (i = 0; i < ETH_FCS_LEN; i++)
+				fcs[i] = ~skb->data[skb->len + i];
+			skb->csum = csum_partial(fcs, ETH_FCS_LEN, skb->csum);
+		}
+		skb->ip_summed = CHECKSUM_COMPLETE;
+	}
+#endif
+
+	netif_rx(skb);
+	dev->stats.rx_packets++;
+	dev->stats.rx_bytes += len;
+out:
+	current_rx_ptr->status.status_word = 0x00000000;
+	current_rx_ptr = current_rx_ptr->next;
+}
+
+/* interrupt routine to handle rx and error signal */
+static irqreturn_t bfin_mac_interrupt(int irq, void *dev_id)
+{
+	struct net_device *dev = dev_id;
+	int number = 0;
+
+get_one_packet:
+	if (current_rx_ptr->status.status_word == 0) {
+		/* no more new packet received */
+		if (number == 0) {
+			if (current_rx_ptr->next->status.status_word != 0) {
+				current_rx_ptr = current_rx_ptr->next;
+				goto real_rx;
+			}
+		}
+		bfin_write_DMA1_IRQ_STATUS(bfin_read_DMA1_IRQ_STATUS() |
+					   DMA_DONE | DMA_ERR);
+		return IRQ_HANDLED;
+	}
+
+real_rx:
+	bfin_mac_rx(dev);
+	number++;
+	goto get_one_packet;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void bfin_mac_poll(struct net_device *dev)
+{
+	struct bfin_mac_local *lp = netdev_priv(dev);
+
+	disable_irq(IRQ_MAC_RX);
+	bfin_mac_interrupt(IRQ_MAC_RX, dev);
+	tx_reclaim_skb(lp);
+	enable_irq(IRQ_MAC_RX);
+}
+#endif				/* CONFIG_NET_POLL_CONTROLLER */
+
+static void bfin_mac_disable(void)
+{
+	unsigned int opmode;
+
+	opmode = bfin_read_EMAC_OPMODE();
+	opmode &= (~RE);
+	opmode &= (~TE);
+	/* Turn off the EMAC */
+	bfin_write_EMAC_OPMODE(opmode);
+}
+
+/*
+ * Enable Interrupts, Receive, and Transmit
+ */
+static int bfin_mac_enable(struct phy_device *phydev)
+{
+	int ret;
+	u32 opmode;
+
+	pr_debug("%s\n", __func__);
+
+	/* Set RX DMA */
+	bfin_write_DMA1_NEXT_DESC_PTR(&(rx_list_head->desc_a));
+	bfin_write_DMA1_CONFIG(rx_list_head->desc_a.config);
+
+	/* Wait MII done */
+	ret = bfin_mdio_poll();
+	if (ret)
+		return ret;
+
+	/* We enable only RX here */
+	/* ASTP   : Enable Automatic Pad Stripping
+	   PR     : Promiscuous Mode for test
+	   PSF    : Receive frames with total length less than 64 bytes.
+	   FDMODE : Full Duplex Mode
+	   LB     : Internal Loopback for test
+	   RE     : Receiver Enable */
+	opmode = bfin_read_EMAC_OPMODE();
+	if (opmode & FDMODE)
+		opmode |= PSF;
+	else
+		opmode |= DRO | DC | PSF;
+	opmode |= RE;
+
+	if (phydev->interface == PHY_INTERFACE_MODE_RMII) {
+		opmode |= RMII; /* For Now only 100MBit are supported */
+#if defined(CONFIG_BF537) || defined(CONFIG_BF536)
+		if (__SILICON_REVISION__ < 3) {
+			/*
+			 * This isn't publicly documented (fun times!), but in
+			 * silicon <=0.2, the RX and TX pins are clocked together.
+			 * So in order to recv, we must enable the transmit side
+			 * as well.  This will cause a spurious TX interrupt too,
+			 * but we can easily consume that.
+			 */
+			opmode |= TE;
+		}
+#endif
+	}
+
+	/* Turn on the EMAC rx */
+	bfin_write_EMAC_OPMODE(opmode);
+
+	return 0;
+}
+
+/* Our watchdog timed out. Called by the networking layer */
+static void bfin_mac_timeout(struct net_device *dev)
+{
+	struct bfin_mac_local *lp = netdev_priv(dev);
+
+	pr_debug("%s: %s\n", dev->name, __func__);
+
+	bfin_mac_disable();
+
+	del_timer(&lp->tx_reclaim_timer);
+
+	/* reset tx queue and free skb */
+	while (tx_list_head != current_tx_ptr) {
+		tx_list_head->desc_a.config &= ~DMAEN;
+		tx_list_head->status.status_word = 0;
+		if (tx_list_head->skb) {
+			dev_kfree_skb(tx_list_head->skb);
+			tx_list_head->skb = NULL;
+		}
+		tx_list_head = tx_list_head->next;
+	}
+
+	if (netif_queue_stopped(lp->ndev))
+		netif_wake_queue(lp->ndev);
+
+	bfin_mac_enable(lp->phydev);
+
+	/* We can accept TX packets again */
+	dev->trans_start = jiffies; /* prevent tx timeout */
+	netif_wake_queue(dev);
+}
+
+static void bfin_mac_multicast_hash(struct net_device *dev)
+{
+	u32 emac_hashhi, emac_hashlo;
+	struct netdev_hw_addr *ha;
+	u32 crc;
+
+	emac_hashhi = emac_hashlo = 0;
+
+	netdev_for_each_mc_addr(ha, dev) {
+		crc = ether_crc(ETH_ALEN, ha->addr);
+		crc >>= 26;
+
+		if (crc & 0x20)
+			emac_hashhi |= 1 << (crc & 0x1f);
+		else
+			emac_hashlo |= 1 << (crc & 0x1f);
+	}
+
+	bfin_write_EMAC_HASHHI(emac_hashhi);
+	bfin_write_EMAC_HASHLO(emac_hashlo);
+}
+
+/*
+ * This routine will, depending on the values passed to it,
+ * either make it accept multicast packets, go into
+ * promiscuous mode (for TCPDUMP and cousins) or accept
+ * a select set of multicast packets
+ */
+static void bfin_mac_set_multicast_list(struct net_device *dev)
+{
+	u32 sysctl;
+
+	if (dev->flags & IFF_PROMISC) {
+		netdev_info(dev, "set promisc mode\n");
+		sysctl = bfin_read_EMAC_OPMODE();
+		sysctl |= PR;
+		bfin_write_EMAC_OPMODE(sysctl);
+	} else if (dev->flags & IFF_ALLMULTI) {
+		/* accept all multicast */
+		sysctl = bfin_read_EMAC_OPMODE();
+		sysctl |= PAM;
+		bfin_write_EMAC_OPMODE(sysctl);
+	} else if (!netdev_mc_empty(dev)) {
+		/* set up multicast hash table */
+		sysctl = bfin_read_EMAC_OPMODE();
+		sysctl |= HM;
+		bfin_write_EMAC_OPMODE(sysctl);
+		bfin_mac_multicast_hash(dev);
+	} else {
+		/* clear promisc or multicast mode */
+		sysctl = bfin_read_EMAC_OPMODE();
+		sysctl &= ~(RAF | PAM);
+		bfin_write_EMAC_OPMODE(sysctl);
+	}
+}
+
+static int bfin_mac_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
+{
+	struct bfin_mac_local *lp = netdev_priv(netdev);
+
+	if (!netif_running(netdev))
+		return -EINVAL;
+
+	switch (cmd) {
+	case SIOCSHWTSTAMP:
+		return bfin_mac_hwtstamp_ioctl(netdev, ifr, cmd);
+	default:
+		if (lp->phydev)
+			return phy_mii_ioctl(lp->phydev, ifr, cmd);
+		else
+			return -EOPNOTSUPP;
+	}
+}
+
+/*
+ * this puts the device in an inactive state
+ */
+static void bfin_mac_shutdown(struct net_device *dev)
+{
+	/* Turn off the EMAC */
+	bfin_write_EMAC_OPMODE(0x00000000);
+	/* Turn off the EMAC RX DMA */
+	bfin_write_DMA1_CONFIG(0x0000);
+	bfin_write_DMA2_CONFIG(0x0000);
+}
+
+/*
+ * Open and Initialize the interface
+ *
+ * Set up everything, reset the card, etc..
+ */
+static int bfin_mac_open(struct net_device *dev)
+{
+	struct bfin_mac_local *lp = netdev_priv(dev);
+	int ret;
+	pr_debug("%s: %s\n", dev->name, __func__);
+
+	/*
+	 * Check that the address is valid.  If its not, refuse
+	 * to bring the device up.  The user must specify an
+	 * address using ifconfig eth0 hw ether xx:xx:xx:xx:xx:xx
+	 */
+	if (!is_valid_ether_addr(dev->dev_addr)) {
+		netdev_warn(dev, "no valid ethernet hw addr\n");
+		return -EINVAL;
+	}
+
+	/* initial rx and tx list */
+	ret = desc_list_init();
+	if (ret)
+		return ret;
+
+	phy_start(lp->phydev);
+	phy_write(lp->phydev, MII_BMCR, BMCR_RESET);
+	setup_system_regs(dev);
+	setup_mac_addr(dev->dev_addr);
+
+	bfin_mac_disable();
+	ret = bfin_mac_enable(lp->phydev);
+	if (ret)
+		return ret;
+	pr_debug("hardware init finished\n");
+
+	netif_start_queue(dev);
+	netif_carrier_on(dev);
+
+	return 0;
+}
+
+/*
+ * this makes the board clean up everything that it can
+ * and not talk to the outside world.   Caused by
+ * an 'ifconfig ethX down'
+ */
+static int bfin_mac_close(struct net_device *dev)
+{
+	struct bfin_mac_local *lp = netdev_priv(dev);
+	pr_debug("%s: %s\n", dev->name, __func__);
+
+	netif_stop_queue(dev);
+	netif_carrier_off(dev);
+
+	phy_stop(lp->phydev);
+	phy_write(lp->phydev, MII_BMCR, BMCR_PDOWN);
+
+	/* clear everything */
+	bfin_mac_shutdown(dev);
+
+	/* free the rx/tx buffers */
+	desc_list_free();
+
+	return 0;
+}
+
+static const struct net_device_ops bfin_mac_netdev_ops = {
+	.ndo_open		= bfin_mac_open,
+	.ndo_stop		= bfin_mac_close,
+	.ndo_start_xmit		= bfin_mac_hard_start_xmit,
+	.ndo_set_mac_address	= bfin_mac_set_mac_address,
+	.ndo_tx_timeout		= bfin_mac_timeout,
+	.ndo_set_multicast_list	= bfin_mac_set_multicast_list,
+	.ndo_do_ioctl           = bfin_mac_ioctl,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_change_mtu		= eth_change_mtu,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= bfin_mac_poll,
+#endif
+};
+
+static int __devinit bfin_mac_probe(struct platform_device *pdev)
+{
+	struct net_device *ndev;
+	struct bfin_mac_local *lp;
+	struct platform_device *pd;
+	struct bfin_mii_bus_platform_data *mii_bus_data;
+	int rc;
+
+	ndev = alloc_etherdev(sizeof(struct bfin_mac_local));
+	if (!ndev) {
+		dev_err(&pdev->dev, "Cannot allocate net device!\n");
+		return -ENOMEM;
+	}
+
+	SET_NETDEV_DEV(ndev, &pdev->dev);
+	platform_set_drvdata(pdev, ndev);
+	lp = netdev_priv(ndev);
+	lp->ndev = ndev;
+
+	/* Grab the MAC address in the MAC */
+	*(__le32 *) (&(ndev->dev_addr[0])) = cpu_to_le32(bfin_read_EMAC_ADDRLO());
+	*(__le16 *) (&(ndev->dev_addr[4])) = cpu_to_le16((u16) bfin_read_EMAC_ADDRHI());
+
+	/* probe mac */
+	/*todo: how to proble? which is revision_register */
+	bfin_write_EMAC_ADDRLO(0x12345678);
+	if (bfin_read_EMAC_ADDRLO() != 0x12345678) {
+		dev_err(&pdev->dev, "Cannot detect Blackfin on-chip ethernet MAC controller!\n");
+		rc = -ENODEV;
+		goto out_err_probe_mac;
+	}
+
+
+	/*
+	 * Is it valid? (Did bootloader initialize it?)
+	 * Grab the MAC from the board somehow
+	 * this is done in the arch/blackfin/mach-bfxxx/boards/eth_mac.c
+	 */
+	if (!is_valid_ether_addr(ndev->dev_addr))
+		bfin_get_ether_addr(ndev->dev_addr);
+
+	/* If still not valid, get a random one */
+	if (!is_valid_ether_addr(ndev->dev_addr))
+		random_ether_addr(ndev->dev_addr);
+
+	setup_mac_addr(ndev->dev_addr);
+
+	if (!pdev->dev.platform_data) {
+		dev_err(&pdev->dev, "Cannot get platform device bfin_mii_bus!\n");
+		rc = -ENODEV;
+		goto out_err_probe_mac;
+	}
+	pd = pdev->dev.platform_data;
+	lp->mii_bus = platform_get_drvdata(pd);
+	if (!lp->mii_bus) {
+		dev_err(&pdev->dev, "Cannot get mii_bus!\n");
+		rc = -ENODEV;
+		goto out_err_probe_mac;
+	}
+	lp->mii_bus->priv = ndev;
+	mii_bus_data = pd->dev.platform_data;
+
+	rc = mii_probe(ndev, mii_bus_data->phy_mode);
+	if (rc) {
+		dev_err(&pdev->dev, "MII Probe failed!\n");
+		goto out_err_mii_probe;
+	}
+
+	lp->vlan1_mask = ETH_P_8021Q | mii_bus_data->vlan1_mask;
+	lp->vlan2_mask = ETH_P_8021Q | mii_bus_data->vlan2_mask;
+
+	/* Fill in the fields of the device structure with ethernet values. */
+	ether_setup(ndev);
+
+	ndev->netdev_ops = &bfin_mac_netdev_ops;
+	ndev->ethtool_ops = &bfin_mac_ethtool_ops;
+
+	init_timer(&lp->tx_reclaim_timer);
+	lp->tx_reclaim_timer.data = (unsigned long)lp;
+	lp->tx_reclaim_timer.function = tx_reclaim_skb_timeout;
+
+	spin_lock_init(&lp->lock);
+
+	/* now, enable interrupts */
+	/* register irq handler */
+	rc = request_irq(IRQ_MAC_RX, bfin_mac_interrupt,
+			IRQF_DISABLED, "EMAC_RX", ndev);
+	if (rc) {
+		dev_err(&pdev->dev, "Cannot request Blackfin MAC RX IRQ!\n");
+		rc = -EBUSY;
+		goto out_err_request_irq;
+	}
+
+	rc = register_netdev(ndev);
+	if (rc) {
+		dev_err(&pdev->dev, "Cannot register net device!\n");
+		goto out_err_reg_ndev;
+	}
+
+	bfin_mac_hwtstamp_init(ndev);
+
+	/* now, print out the card info, in a short format.. */
+	netdev_info(ndev, "%s, Version %s\n", DRV_DESC, DRV_VERSION);
+
+	return 0;
+
+out_err_reg_ndev:
+	free_irq(IRQ_MAC_RX, ndev);
+out_err_request_irq:
+out_err_mii_probe:
+	mdiobus_unregister(lp->mii_bus);
+	mdiobus_free(lp->mii_bus);
+out_err_probe_mac:
+	platform_set_drvdata(pdev, NULL);
+	free_netdev(ndev);
+
+	return rc;
+}
+
+static int __devexit bfin_mac_remove(struct platform_device *pdev)
+{
+	struct net_device *ndev = platform_get_drvdata(pdev);
+	struct bfin_mac_local *lp = netdev_priv(ndev);
+
+	platform_set_drvdata(pdev, NULL);
+
+	lp->mii_bus->priv = NULL;
+
+	unregister_netdev(ndev);
+
+	free_irq(IRQ_MAC_RX, ndev);
+
+	free_netdev(ndev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int bfin_mac_suspend(struct platform_device *pdev, pm_message_t mesg)
+{
+	struct net_device *net_dev = platform_get_drvdata(pdev);
+	struct bfin_mac_local *lp = netdev_priv(net_dev);
+
+	if (lp->wol) {
+		bfin_write_EMAC_OPMODE((bfin_read_EMAC_OPMODE() & ~TE) | RE);
+		bfin_write_EMAC_WKUP_CTL(MPKE);
+		enable_irq_wake(IRQ_MAC_WAKEDET);
+	} else {
+		if (netif_running(net_dev))
+			bfin_mac_close(net_dev);
+	}
+
+	return 0;
+}
+
+static int bfin_mac_resume(struct platform_device *pdev)
+{
+	struct net_device *net_dev = platform_get_drvdata(pdev);
+	struct bfin_mac_local *lp = netdev_priv(net_dev);
+
+	if (lp->wol) {
+		bfin_write_EMAC_OPMODE(bfin_read_EMAC_OPMODE() | TE);
+		bfin_write_EMAC_WKUP_CTL(0);
+		disable_irq_wake(IRQ_MAC_WAKEDET);
+	} else {
+		if (netif_running(net_dev))
+			bfin_mac_open(net_dev);
+	}
+
+	return 0;
+}
+#else
+#define bfin_mac_suspend NULL
+#define bfin_mac_resume NULL
+#endif	/* CONFIG_PM */
+
+static int __devinit bfin_mii_bus_probe(struct platform_device *pdev)
+{
+	struct mii_bus *miibus;
+	struct bfin_mii_bus_platform_data *mii_bus_pd;
+	const unsigned short *pin_req;
+	int rc, i;
+
+	mii_bus_pd = dev_get_platdata(&pdev->dev);
+	if (!mii_bus_pd) {
+		dev_err(&pdev->dev, "No peripherals in platform data!\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * We are setting up a network card,
+	 * so set the GPIO pins to Ethernet mode
+	 */
+	pin_req = mii_bus_pd->mac_peripherals;
+	rc = peripheral_request_list(pin_req, KBUILD_MODNAME);
+	if (rc) {
+		dev_err(&pdev->dev, "Requesting peripherals failed!\n");
+		return rc;
+	}
+
+	rc = -ENOMEM;
+	miibus = mdiobus_alloc();
+	if (miibus == NULL)
+		goto out_err_alloc;
+	miibus->read = bfin_mdiobus_read;
+	miibus->write = bfin_mdiobus_write;
+	miibus->reset = bfin_mdiobus_reset;
+
+	miibus->parent = &pdev->dev;
+	miibus->name = "bfin_mii_bus";
+	miibus->phy_mask = mii_bus_pd->phy_mask;
+
+	snprintf(miibus->id, MII_BUS_ID_SIZE, "0");
+	miibus->irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
+	if (!miibus->irq)
+		goto out_err_irq_alloc;
+
+	for (i = rc; i < PHY_MAX_ADDR; ++i)
+		miibus->irq[i] = PHY_POLL;
+
+	rc = clamp(mii_bus_pd->phydev_number, 0, PHY_MAX_ADDR);
+	if (rc != mii_bus_pd->phydev_number)
+		dev_err(&pdev->dev, "Invalid number (%i) of phydevs\n",
+			mii_bus_pd->phydev_number);
+	for (i = 0; i < rc; ++i) {
+		unsigned short phyaddr = mii_bus_pd->phydev_data[i].addr;
+		if (phyaddr < PHY_MAX_ADDR)
+			miibus->irq[phyaddr] = mii_bus_pd->phydev_data[i].irq;
+		else
+			dev_err(&pdev->dev,
+				"Invalid PHY address %i for phydev %i\n",
+				phyaddr, i);
+	}
+
+	rc = mdiobus_register(miibus);
+	if (rc) {
+		dev_err(&pdev->dev, "Cannot register MDIO bus!\n");
+		goto out_err_mdiobus_register;
+	}
+
+	platform_set_drvdata(pdev, miibus);
+	return 0;
+
+out_err_mdiobus_register:
+	kfree(miibus->irq);
+out_err_irq_alloc:
+	mdiobus_free(miibus);
+out_err_alloc:
+	peripheral_free_list(pin_req);
+
+	return rc;
+}
+
+static int __devexit bfin_mii_bus_remove(struct platform_device *pdev)
+{
+	struct mii_bus *miibus = platform_get_drvdata(pdev);
+	struct bfin_mii_bus_platform_data *mii_bus_pd =
+		dev_get_platdata(&pdev->dev);
+
+	platform_set_drvdata(pdev, NULL);
+	mdiobus_unregister(miibus);
+	kfree(miibus->irq);
+	mdiobus_free(miibus);
+	peripheral_free_list(mii_bus_pd->mac_peripherals);
+
+	return 0;
+}
+
+static struct platform_driver bfin_mii_bus_driver = {
+	.probe = bfin_mii_bus_probe,
+	.remove = __devexit_p(bfin_mii_bus_remove),
+	.driver = {
+		.name = "bfin_mii_bus",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static struct platform_driver bfin_mac_driver = {
+	.probe = bfin_mac_probe,
+	.remove = __devexit_p(bfin_mac_remove),
+	.resume = bfin_mac_resume,
+	.suspend = bfin_mac_suspend,
+	.driver = {
+		.name = KBUILD_MODNAME,
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init bfin_mac_init(void)
+{
+	int ret;
+	ret = platform_driver_register(&bfin_mii_bus_driver);
+	if (!ret)
+		return platform_driver_register(&bfin_mac_driver);
+	return -ENODEV;
+}
+
+module_init(bfin_mac_init);
+
+static void __exit bfin_mac_cleanup(void)
+{
+	platform_driver_unregister(&bfin_mac_driver);
+	platform_driver_unregister(&bfin_mii_bus_driver);
+}
+
+module_exit(bfin_mac_cleanup);
+
diff --git a/drivers/net/ethernet/adi/bfin_mac.h b/drivers/net/ethernet/adi/bfin_mac.h
new file mode 100644
index 0000000..f8559ac
--- /dev/null
+++ b/drivers/net/ethernet/adi/bfin_mac.h
@@ -0,0 +1,106 @@
+/*
+ * Blackfin On-Chip MAC Driver
+ *
+ * Copyright 2004-2007 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+#ifndef _BFIN_MAC_H_
+#define _BFIN_MAC_H_
+
+#include <linux/net_tstamp.h>
+#include <linux/clocksource.h>
+#include <linux/timecompare.h>
+#include <linux/timer.h>
+#include <linux/etherdevice.h>
+#include <linux/bfin_mac.h>
+
+/*
+ * Disable hardware checksum for bug #5600 if writeback cache is
+ * enabled. Otherwize, corrupted RX packet will be sent up stack
+ * without error mark.
+ */
+#ifndef CONFIG_BFIN_EXTMEM_WRITEBACK
+#define BFIN_MAC_CSUM_OFFLOAD
+#endif
+
+#define TX_RECLAIM_JIFFIES (HZ / 5)
+
+struct dma_descriptor {
+	struct dma_descriptor *next_dma_desc;
+	unsigned long start_addr;
+	unsigned short config;
+	unsigned short x_count;
+};
+
+struct status_area_rx {
+#if defined(BFIN_MAC_CSUM_OFFLOAD)
+	unsigned short ip_hdr_csum;	/* ip header checksum */
+	/* ip payload(udp or tcp or others) checksum */
+	unsigned short ip_payload_csum;
+#endif
+	unsigned long status_word;	/* the frame status word */
+};
+
+struct status_area_tx {
+	unsigned long status_word;	/* the frame status word */
+};
+
+/* use two descriptors for a packet */
+struct net_dma_desc_rx {
+	struct net_dma_desc_rx *next;
+	struct sk_buff *skb;
+	struct dma_descriptor desc_a;
+	struct dma_descriptor desc_b;
+	struct status_area_rx status;
+};
+
+/* use two descriptors for a packet */
+struct net_dma_desc_tx {
+	struct net_dma_desc_tx *next;
+	struct sk_buff *skb;
+	struct dma_descriptor desc_a;
+	struct dma_descriptor desc_b;
+	unsigned char packet[1560];
+	struct status_area_tx status;
+};
+
+struct bfin_mac_local {
+	/*
+	 * these are things that the kernel wants me to keep, so users
+	 * can find out semi-useless statistics of how well the card is
+	 * performing
+	 */
+	struct net_device_stats stats;
+
+	spinlock_t lock;
+
+	int wol;		/* Wake On Lan */
+	int irq_wake_requested;
+	struct timer_list tx_reclaim_timer;
+	struct net_device *ndev;
+
+	/* Data for EMAC_VLAN1 regs */
+	u16 vlan1_mask, vlan2_mask;
+
+	/* MII and PHY stuffs */
+	int old_link;          /* used by bf537_adjust_link */
+	int old_speed;
+	int old_duplex;
+
+	struct phy_device *phydev;
+	struct mii_bus *mii_bus;
+
+#if defined(CONFIG_BFIN_MAC_USE_HWSTAMP)
+	struct cyclecounter cycles;
+	struct timecounter clock;
+	struct timecompare compare;
+	struct hwtstamp_config stamp_cfg;
+#endif
+};
+
+extern void bfin_get_ether_addr(char *addr);
+
+#endif