summaryrefslogtreecommitdiffstats
path: root/drivers/net/e1000e
diff options
context:
space:
mode:
authorJesse Brandeburg <jesse.brandeburg@intel.com>2009-04-17 20:44:34 +0000
committerDavid S. Miller <davem@davemloft.net>2009-04-20 02:00:39 -0700
commit9c563d20671e5fbe3045fd79c18b306ccb77b0b6 (patch)
treedd9100c60991d5d43c069d588c73bc5ccaf02309 /drivers/net/e1000e
parentb168dfc51604ec293db16dc4d558043585578a2d (diff)
downloadop-kernel-dev-9c563d20671e5fbe3045fd79c18b306ccb77b0b6.zip
op-kernel-dev-9c563d20671e5fbe3045fd79c18b306ccb77b0b6.tar.gz
e1000e: indicate link down at load
As reported by Andrew Lutomirski <amluto@gmail.com> All the intel wired ethernet drivers were calling netif_carrier_off and netif_stop_queue (or variants) before calling register_netdevice This is incorrect behavior as was pointed out by davem, and causes ifconfig and friends to report a strange state before first link after the driver was loaded, since without a netif_carrier_off, the stack assumes carrier_on, but before register_netdev, netlink messages are not sent out telling link state. This apparently confused *some* versions of networkmanager. Andy tested this for e1000e and confirmed it was working for him. see thread: http://marc.info/?l=linux-netdev&m=123946479705636&w=2 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andy Lutomirski <amluto@gmail.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/e1000e')
-rw-r--r--drivers/net/e1000e/netdev.c9
1 files changed, 5 insertions, 4 deletions
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 1693ed1..c0ff550 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -3072,6 +3072,8 @@ static int e1000_open(struct net_device *netdev)
if (test_bit(__E1000_TESTING, &adapter->state))
return -EBUSY;
+ netif_carrier_off(netdev);
+
/* allocate transmit descriptors */
err = e1000e_setup_tx_resources(adapter);
if (err)
@@ -5037,15 +5039,14 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
if (!(adapter->flags & FLAG_HAS_AMT))
e1000_get_hw_control(adapter);
- /* tell the stack to leave us alone until e1000_open() is called */
- netif_carrier_off(netdev);
- netif_tx_stop_all_queues(netdev);
-
strcpy(netdev->name, "eth%d");
err = register_netdev(netdev);
if (err)
goto err_register;
+ /* carrier off reporting is important to ethtool even BEFORE open */
+ netif_carrier_off(netdev);
+
e1000_print_device_info(adapter);
return 0;
OpenPOWER on IntegriCloud