diff options
author | Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 2011-04-07 07:42:33 -0700 |
---|---|---|
committer | Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 2011-08-10 20:03:27 -0700 |
commit | dee1ad47f2ee75f5146d83ca757c1b7861c34c3b (patch) | |
tree | 47cbdefe3d0f9b729724e378ad6a96eaddfd5fbc /drivers/net/e1000e/lib.c | |
parent | f7917c009c28c941ba151ee66f04dc7f6a2e1e0b (diff) | |
download | op-kernel-dev-dee1ad47f2ee75f5146d83ca757c1b7861c34c3b.zip op-kernel-dev-dee1ad47f2ee75f5146d83ca757c1b7861c34c3b.tar.gz |
intel: Move the Intel wired LAN drivers
Moves the Intel wired LAN drivers into drivers/net/ethernet/intel/ and
the necessary Kconfig and Makefile changes.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Diffstat (limited to 'drivers/net/e1000e/lib.c')
-rw-r--r-- | drivers/net/e1000e/lib.c | 2692 |
1 files changed, 0 insertions, 2692 deletions
diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c deleted file mode 100644 index 7898a67..0000000 --- a/drivers/net/e1000e/lib.c +++ /dev/null @@ -1,2692 +0,0 @@ -/******************************************************************************* - - Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2011 Intel Corporation. - - This program is free software; you can redistribute it and/or modify it - under the terms and conditions of the GNU General Public License, - version 2, as published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - more details. - - You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., - 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - - The full GNU General Public License is included in this distribution in - the file called "COPYING". - - Contact Information: - Linux NICS <linux.nics@intel.com> - e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - -#include "e1000.h" - -enum e1000_mng_mode { - e1000_mng_mode_none = 0, - e1000_mng_mode_asf, - e1000_mng_mode_pt, - e1000_mng_mode_ipmi, - e1000_mng_mode_host_if_only -}; - -#define E1000_FACTPS_MNGCG 0x20000000 - -/* Intel(R) Active Management Technology signature */ -#define E1000_IAMT_SIGNATURE 0x544D4149 - -/** - * e1000e_get_bus_info_pcie - Get PCIe bus information - * @hw: pointer to the HW structure - * - * Determines and stores the system bus information for a particular - * network interface. The following bus information is determined and stored: - * bus speed, bus width, type (PCIe), and PCIe function. - **/ -s32 e1000e_get_bus_info_pcie(struct e1000_hw *hw) -{ - struct e1000_mac_info *mac = &hw->mac; - struct e1000_bus_info *bus = &hw->bus; - struct e1000_adapter *adapter = hw->adapter; - u16 pcie_link_status, cap_offset; - - cap_offset = adapter->pdev->pcie_cap; - if (!cap_offset) { - bus->width = e1000_bus_width_unknown; - } else { - pci_read_config_word(adapter->pdev, - cap_offset + PCIE_LINK_STATUS, - &pcie_link_status); - bus->width = (enum e1000_bus_width)((pcie_link_status & - PCIE_LINK_WIDTH_MASK) >> - PCIE_LINK_WIDTH_SHIFT); - } - - mac->ops.set_lan_id(hw); - - return 0; -} - -/** - * e1000_set_lan_id_multi_port_pcie - Set LAN id for PCIe multiple port devices - * - * @hw: pointer to the HW structure - * - * Determines the LAN function id by reading memory-mapped registers - * and swaps the port value if requested. - **/ -void e1000_set_lan_id_multi_port_pcie(struct e1000_hw *hw) -{ - struct e1000_bus_info *bus = &hw->bus; - u32 reg; - - /* - * The status register reports the correct function number - * for the device regardless of function swap state. - */ - reg = er32(STATUS); - bus->func = (reg & E1000_STATUS_FUNC_MASK) >> E1000_STATUS_FUNC_SHIFT; -} - -/** - * e1000_set_lan_id_single_port - Set LAN id for a single port device - * @hw: pointer to the HW structure - * - * Sets the LAN function id to zero for a single port device. - **/ -void e1000_set_lan_id_single_port(struct e1000_hw *hw) -{ - struct e1000_bus_info *bus = &hw->bus; - - bus->func = 0; -} - -/** - * e1000_clear_vfta_generic - Clear VLAN filter table - * @hw: pointer to the HW structure - * - * Clears the register array which contains the VLAN filter table by - * setting all the values to 0. - **/ -void e1000_clear_vfta_generic(struct e1000_hw *hw) -{ - u32 offset; - - for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) { - E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, 0); - e1e_flush(); - } -} - -/** - * e1000_write_vfta_generic - Write value to VLAN filter table - * @hw: pointer to the HW structure - * @offset: register offset in VLAN filter table - * @value: register value written to VLAN filter table - * - * Writes value at the given offset in the register array which stores - * the VLAN filter table. - **/ -void e1000_write_vfta_generic(struct e1000_hw *hw, u32 offset, u32 value) -{ - E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, value); - e1e_flush(); -} - -/** - * e1000e_init_rx_addrs - Initialize receive address's - * @hw: pointer to the HW structure - * @rar_count: receive address registers - * - * Setup the receive address registers by setting the base receive address - * register to the devices MAC address and clearing all the other receive - * address registers to 0. - **/ -void e1000e_init_rx_addrs(struct e1000_hw *hw, u16 rar_count) -{ - u32 i; - u8 mac_addr[ETH_ALEN] = {0}; - - /* Setup the receive address */ - e_dbg("Programming MAC Address into RAR[0]\n"); - - e1000e_rar_set(hw, hw->mac.addr, 0); - - /* Zero out the other (rar_entry_count - 1) receive addresses */ - e_dbg("Clearing RAR[1-%u]\n", rar_count-1); - for (i = 1; i < rar_count; i++) - e1000e_rar_set(hw, mac_addr, i); -} - -/** - * e1000_check_alt_mac_addr_generic - Check for alternate MAC addr - * @hw: pointer to the HW structure - * - * Checks the nvm for an alternate MAC address. An alternate MAC address - * can be setup by pre-boot software and must be treated like a permanent - * address and must override the actual permanent MAC address. If an - * alternate MAC address is found it is programmed into RAR0, replacing - * the permanent address that was installed into RAR0 by the Si on reset. - * This function will return SUCCESS unless it encounters an error while - * reading the EEPROM. - **/ -s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw) -{ - u32 i; - s32 ret_val = 0; - u16 offset, nvm_alt_mac_addr_offset, nvm_data; - u8 alt_mac_addr[ETH_ALEN]; - - ret_val = e1000_read_nvm(hw, NVM_COMPAT, 1, &nvm_data); - if (ret_val) - goto out; - - /* Check for LOM (vs. NIC) or one of two valid mezzanine cards */ - if (!((nvm_data & NVM_COMPAT_LOM) || - (hw->adapter->pdev->device == E1000_DEV_ID_82571EB_SERDES_DUAL) || - (hw->adapter->pdev->device == E1000_DEV_ID_82571EB_SERDES_QUAD))) - goto out; - - ret_val = e1000_read_nvm(hw, NVM_ALT_MAC_ADDR_PTR, 1, - &nvm_alt_mac_addr_offset); - if (ret_val) { - e_dbg("NVM Read Error\n"); - goto out; - } - - if (nvm_alt_mac_addr_offset == 0xFFFF) { - /* There is no Alternate MAC Address */ - goto out; - } - - if (hw->bus.func == E1000_FUNC_1) - nvm_alt_mac_addr_offset += E1000_ALT_MAC_ADDRESS_OFFSET_LAN1; - for (i = 0; i < ETH_ALEN; i += 2) { - offset = nvm_alt_mac_addr_offset + (i >> 1); - ret_val = e1000_read_nvm(hw, offset, 1, &nvm_data); - if (ret_val) { - e_dbg("NVM Read Error\n"); - goto out; - } - - alt_mac_addr[i] = (u8)(nvm_data & 0xFF); - alt_mac_addr[i + 1] = (u8)(nvm_data >> 8); - } - - /* if multicast bit is set, the alternate address will not be used */ - if (is_multicast_ether_addr(alt_mac_addr)) { - e_dbg("Ignoring Alternate Mac Address with MC bit set\n"); - goto out; - } - - /* - * We have a valid alternate MAC address, and we want to treat it the - * same as the normal permanent MAC address stored by the HW into the - * RAR. Do this by mapping this address into RAR0. - */ - e1000e_rar_set(hw, alt_mac_addr, 0); - -out: - return ret_val; -} - -/** - * e1000e_rar_set - Set receive address register - * @hw: pointer to the HW structure - * @addr: pointer to the receive address - * @index: receive address array register - * - * Sets the receive address array register at index to the address passed - * in by addr. - **/ -void e1000e_rar_set(struct e1000_hw *hw, u8 *addr, u32 index) -{ - u32 rar_low, rar_high; - - /* - * HW expects these in little endian so we reverse the byte order - * from network order (big endian) to little endian - */ - rar_low = ((u32) addr[0] | - ((u32) addr[1] << 8) | - ((u32) addr[2] << 16) | ((u32) addr[3] << 24)); - - rar_high = ((u32) addr[4] | ((u32) addr[5] << 8)); - - /* If MAC address zero, no need to set the AV bit */ - if (rar_low || rar_high) - rar_high |= E1000_RAH_AV; - - /* - * Some bridges will combine consecutive 32-bit writes into - * a single burst write, which will malfunction on some parts. - * The flushes avoid this. - */ - ew32(RAL(index), rar_low); - e1e_flush(); - ew32(RAH(index), rar_high); - e1e_flush(); -} - -/** - * e1000_hash_mc_addr - Generate a multicast hash value - * @hw: pointer to the HW structure - * @mc_addr: pointer to a multicast address - * - * Generates a multicast address hash value which is used to determine - * the multicast filter table array address and new table value. See - * e1000_mta_set_generic() - **/ -static u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr) -{ - u32 hash_value, hash_mask; - u8 bit_shift = 0; - - /* Register count multiplied by bits per register */ - hash_mask = (hw->mac.mta_reg_count * 32) - 1; - - /* - * For a mc_filter_type of 0, bit_shift is the number of left-shifts - * where 0xFF would still fall within the hash mask. - */ - while (hash_mask >> bit_shift != 0xFF) - bit_shift++; - - /* - * The portion of the address that is used for the hash table - * is determined by the mc_filter_type setting. - * The algorithm is such that there is a total of 8 bits of shifting. - * The bit_shift for a mc_filter_type of 0 represents the number of - * left-shifts where the MSB of mc_addr[5] would still fall within - * the hash_mask. Case 0 does this exactly. Since there are a total - * of 8 bits of shifting, then mc_addr[4] will shift right the - * remaining number of bits. Thus 8 - bit_shift. The rest of the - * cases are a variation of this algorithm...essentially raising the - * number of bits to shift mc_addr[5] left, while still keeping the - * 8-bit shifting total. - * - * For example, given the following Destination MAC Address and an - * mta register count of 128 (thus a 4096-bit vector and 0xFFF mask), - * we can see that the bit_shift for case 0 is 4. These are the hash - * values resulting from each mc_filter_type... - * [0] [1] [2] [3] [4] [5] - * 01 AA 00 12 34 56 - * LSB MSB - * - * case 0: hash_value = ((0x34 >> 4) | (0x56 << 4)) & 0xFFF = 0x563 - * case 1: hash_value = ((0x34 >> 3) | (0x56 << 5)) & 0xFFF = 0xAC6 - * case 2: hash_value = ((0x34 >> 2) | (0x56 << 6)) & 0xFFF = 0x163 - * case 3: hash_value = ((0x34 >> 0) | (0x56 << 8)) & 0xFFF = 0x634 - */ - switch (hw->mac.mc_filter_type) { - default: - case 0: - break; - case 1: - bit_shift += 1; - break; - case 2: - bit_shift += 2; - break; - case 3: - bit_shift += 4; - break; - } - - hash_value = hash_mask & (((mc_addr[4] >> (8 - bit_shift)) | - (((u16) mc_addr[5]) << bit_shift))); - - return hash_value; -} - -/** - * e1000e_update_mc_addr_list_generic - Update Multicast addresses - * @hw: pointer to the HW structure - * @mc_addr_list: array of multicast addresses to program - * @mc_addr_count: number of multicast addresses to program - * - * Updates entire Multicast Table Array. - * The caller must have a packed mc_addr_list of multicast addresses. - **/ -void e1000e_update_mc_addr_list_generic(struct e1000_hw *hw, - u8 *mc_addr_list, u32 mc_addr_count) -{ - u32 hash_value, hash_bit, hash_reg; - int i; - - /* clear mta_shadow */ - memset(&hw->mac.mta_shadow, 0, sizeof(hw->mac.mta_shadow)); - - /* update mta_shadow from mc_addr_list */ - for (i = 0; (u32) i < mc_addr_count; i++) { - hash_value = e1000_hash_mc_addr(hw, mc_addr_list); - - hash_reg = (hash_value >> 5) & (hw->mac.mta_reg_count - 1); - hash_bit = hash_value & 0x1F; - - hw->mac.mta_shadow[hash_reg] |= (1 << hash_bit); - mc_addr_list += (ETH_ALEN); - } - - /* replace the entire MTA table */ - for (i = hw->mac.mta_reg_count - 1; i >= 0; i--) - E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, hw->mac.mta_shadow[i]); - e1e_flush(); -} - -/** - * e1000e_clear_hw_cntrs_base - Clear base hardware counters - * @hw: pointer to the HW structure - * - * Clears the base hardware counters by reading the counter registers. - **/ -void e1000e_clear_hw_cntrs_base(struct e1000_hw *hw) -{ - er32(CRCERRS); - er32(SYMERRS); - er32(MPC); - er32(SCC); - er32(ECOL); - er32(MCC); - er32(LATECOL); - er32(COLC); - er32(DC); - er32(SEC); - er32(RLEC); - er32(XONRXC); - er32(XONTXC); - er32(XOFFRXC); - er32(XOFFTXC); - er32(FCRUC); - er32(GPRC); - er32(BPRC); - er32(MPRC); - er32(GPTC); - er32(GORCL); - er32(GORCH); - er32(GOTCL); - er32(GOTCH); - er32(RNBC); - er32(RUC); - er32(RFC); - er32(ROC); - er32(RJC); - er32(TORL); - er32(TORH); - er32(TOTL); - er32(TOTH); - er32(TPR); - er32(TPT); - er32(MPTC); - er32(BPTC); -} - -/** - * e1000e_check_for_copper_link - Check for link (Copper) - * @hw: pointer to the HW structure - * - * Checks to see of the link status of the hardware has changed. If a - * change in link status has been detected, then we read the PHY registers - * to get the current speed/duplex if link exists. - **/ -s32 e1000e_check_for_copper_link(struct e1000_hw *hw) -{ - struct e1000_mac_info *mac = &hw->mac; - s32 ret_val; - bool link; - - /* - * We only want to go out to the PHY registers to see if Auto-Neg - * has completed and/or if our link status has changed. The - * get_link_status flag is set upon receiving a Link Status - * Change or Rx Sequence Error interrupt. - */ - if (!mac->get_link_status) - return 0; - - /* - * First we want to see if the MII Status Register reports - * link. If so, then we want to get the current speed/duplex - * of the PHY. - */ - ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link); - if (ret_val) - return ret_val; - - if (!link) - return ret_val; /* No link detected */ - - mac->get_link_status = false; - - /* - * Check if there was DownShift, must be checked - * immediately after link-up - */ - e1000e_check_downshift(hw); - - /* - * If we are forcing speed/duplex, then we simply return since - * we have already determined whether we have link or not. - */ - if (!mac->autoneg) { - ret_val = -E1000_ERR_CONFIG; - return ret_val; - } - - /* - * Auto-Neg is enabled. Auto Speed Detection takes care - * of MAC speed/duplex configuration. So we only need to - * configure Collision Distance in the MAC. - */ - e1000e_config_collision_dist(hw); - - /* - * Configure Flow Control now that Auto-Neg has completed. - * First, we need to restore the desired flow control - * settings because we may have had to re-autoneg with a - * different link partner. - */ - ret_val = e1000e_config_fc_after_link_up(hw); - if (ret_val) - e_dbg("Error configuring flow control\n"); - - return ret_val; -} - -/** - * e1000e_check_for_fiber_link - Check for link (Fiber) - * @hw: pointer to the HW structure - * - * Checks for link up on the hardware. If link is not up and we have - * a signal, then we need to force link up. - **/ -s32 e1000e_check_for_fiber_link(struct e1000_hw *hw) -{ - struct e1000_mac_info *mac = &hw->mac; - u32 rxcw; - u32 ctrl; - u32 status; - s32 ret_val; - - ctrl = er32(CTRL); - status = er32(STATUS); - rxcw = er32(RXCW); - - /* - * If we don't have link (auto-negotiation failed or link partner - * cannot auto-negotiate), the cable is plugged in (we have signal), - * and our link partner is not trying to auto-negotiate with us (we - * are receiving idles or data), we need to force link up. We also - * need to give auto-negotiation time to complete, in case the cable - * was just plugged in. The autoneg_failed flag does this. - */ - /* (ctrl & E1000_CTRL_SWDPIN1) == 1 == have signal */ - if ((ctrl & E1000_CTRL_SWDPIN1) && (!(status & E1000_STATUS_LU)) && - (!(rxcw & E1000_RXCW_C))) { - if (mac->autoneg_failed == 0) { - mac->autoneg_failed = 1; - return 0; - } - e_dbg("NOT Rx'ing /C/, disable AutoNeg and force link.\n"); - - /* Disable auto-negotiation in the TXCW register */ - ew32(TXCW, (mac->txcw & ~E1000_TXCW_ANE)); - - /* Force link-up and also force full-duplex. */ - ctrl = er32(CTRL); - ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD); - ew32(CTRL, ctrl); - - /* Configure Flow Control after forcing link up. */ - ret_val = e1000e_config_fc_after_link_up(hw); - if (ret_val) { - e_dbg("Error configuring flow control\n"); - return ret_val; - } - } else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) { - /* - * If we are forcing link and we are receiving /C/ ordered - * sets, re-enable auto-negotiation in the TXCW register - * and disable forced link in the Device Control register - * in an attempt to auto-negotiate with our link partner. - */ - e_dbg("Rx'ing /C/, enable AutoNeg and stop forcing link.\n"); - ew32(TXCW, mac->txcw); - ew32(CTRL, (ctrl & ~E1000_CTRL_SLU)); - - mac->serdes_has_link = true; - } - - return 0; -} - -/** - * e1000e_check_for_serdes_link - Check for link (Serdes) - * @hw: pointer to the HW structure - * - * Checks for link up on the hardware. If link is not up and we have - * a signal, then we need to force link up. - **/ -s32 e1000e_check_for_serdes_link(struct e1000_hw *hw) -{ - struct e1000_mac_info *mac = &hw->mac; - u32 rxcw; - u32 ctrl; - u32 status; - s32 ret_val; - - ctrl = er32(CTRL); - status = er32(STATUS); - rxcw = er32(RXCW); - - /* - * If we don't have link (auto-negotiation failed or link partner - * cannot auto-negotiate), and our link partner is not trying to - * auto-negotiate with us (we are receiving idles or data), - * we need to force link up. We also need to give auto-negotiation - * time to complete. - */ - /* (ctrl & E1000_CTRL_SWDPIN1) == 1 == have signal */ - if ((!(status & E1000_STATUS_LU)) && (!(rxcw & E1000_RXCW_C))) { - if (mac->autoneg_failed == 0) { - mac->autoneg_failed = 1; - return 0; - } - e_dbg("NOT Rx'ing /C/, disable AutoNeg and force link.\n"); - - /* Disable auto-negotiation in the TXCW register */ - ew32(TXCW, (mac->txcw & ~E1000_TXCW_ANE)); - - /* Force link-up and also force full-duplex. */ - ctrl = er32(CTRL); - ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD); - ew32(CTRL, ctrl); - - /* Configure Flow Control after forcing link up. */ - ret_val = e1000e_config_fc_after_link_up(hw); - if (ret_val) { - e_dbg("Error configuring flow control\n"); - return ret_val; - } - } else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) { - /* - * If we are forcing link and we are receiving /C/ ordered - * sets, re-enable auto-negotiation in the TXCW register - * and disable forced link in the Device Control register - * in an attempt to auto-negotiate with our link partner. - */ - e_dbg("Rx'ing /C/, enable AutoNeg and stop forcing link.\n"); - ew32(TXCW, mac->txcw); - ew32(CTRL, (ctrl & ~E1000_CTRL_SLU)); - - mac->serdes_has_link = true; - } else if (!(E1000_TXCW_ANE & er32(TXCW))) { - /* - * If we force link for non-auto-negotiation switch, check - * link status based on MAC synchronization for internal - * serdes media type. - */ - /* SYNCH bit and IV bit are sticky. */ - udelay(10); - rxcw = er32(RXCW); - if (rxcw & E1000_RXCW_SYNCH) { - if (!(rxcw & E1000_RXCW_IV)) { - mac->serdes_has_link = true; - e_dbg("SERDES: Link up - forced.\n"); - } - } else { - mac->serdes_has_link = false; - e_dbg("SERDES: Link down - force failed.\n"); - } - } - - if (E1000_TXCW_ANE & er32(TXCW)) { - status = er32(STATUS); - if (status & E1000_STATUS_LU) { - /* SYNCH bit and IV bit are sticky, so reread rxcw. */ - udelay(10); - rxcw = er32(RXCW); - if (rxcw & E1000_RXCW_SYNCH) { - if (!(rxcw & E1000_RXCW_IV)) { - mac->serdes_has_link = true; - e_dbg("SERDES: Link up - autoneg " - "completed successfully.\n"); - } else { - mac->serdes_has_link = false; - e_dbg("SERDES: Link down - invalid" - "codewords detected in autoneg.\n"); - } - } else { - mac->serdes_has_link = false; - e_dbg("SERDES: Link down - no sync.\n"); - } - } else { - mac->serdes_has_link = false; - e_dbg("SERDES: Link down - autoneg failed\n"); - } - } - - return 0; -} - -/** - * e1000_set_default_fc_generic - Set flow control default values - * @hw: pointer to the HW structure - * - * Read the EEPROM for the default values for flow control and store the - * values. - **/ -static s32 e1000_set_default_fc_generic(struct e1000_hw *hw) -{ - s32 ret_val; - u16 nvm_data; - - /* - * Read and store word 0x0F of the EEPROM. This word contains bits - * that determine the hardware's default PAUSE (flow control) mode, - * a bit that determines whether the HW defaults to enabling or - * disabling auto-negotiation, and the direction of the - * SW defined pins. If there is no SW over-ride of the flow - * control setting, then the variable hw->fc will - * be initialized based on a value in the EEPROM. - */ - ret_val = e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &nvm_data); - - if (ret_val) { - e_dbg("NVM Read Error\n"); - return ret_val; - } - - if ((nvm_data & NVM_WORD0F_PAUSE_MASK) == 0) - hw->fc.requested_mode = e1000_fc_none; - else if ((nvm_data & NVM_WORD0F_PAUSE_MASK) == - NVM_WORD0F_ASM_DIR) - hw->fc.requested_mode = e1000_fc_tx_pause; - else - hw->fc.requested_mode = e1000_fc_full; - - return 0; -} - -/** - * e1000e_setup_link - Setup flow control and link settings - * @hw: pointer to the HW structure - * - * Determines which flow control settings to use, then configures flow - * control. Calls the appropriate media-specific link configuration - * function. Assuming the adapter has a valid link partner, a valid link - * should be established. Assumes the hardware has previously been reset - * and the transmitter and receiver are not enabled. - **/ -s32 e1000e_setup_link(struct e1000_hw *hw) -{ - struct e1000_mac_info *mac = &hw->mac; - s32 ret_val; - - /* - * In the case of the phy reset being blocked, we already have a link. - * We do not need to set it up again. - */ - if (e1000_check_reset_block(hw)) - return 0; - - /* - * If requested flow control is set to default, set flow control - * based on the EEPROM flow control settings. - */ - if (hw->fc.requested_mode == e1000_fc_default) { - ret_val = e1000_set_default_fc_generic(hw); - if (ret_val) - return ret_val; - } - - /* - * Save off the requested flow control mode for use later. Depending - * on the link partner's capabilities, we may or may not use this mode. - */ - hw->fc.current_mode = hw->fc.requested_mode; - - e_dbg("After fix-ups FlowControl is now = %x\n", - hw->fc.current_mode); - - /* Call the necessary media_type subroutine to configure the link. */ - ret_val = mac->ops.setup_physical_interface(hw); - if (ret_val) - return ret_val; - - /* - * Initialize the flow control address, type, and PAUSE timer - * registers to their default values. This is done even if flow - * control is disabled, because it does not hurt anything to - * initialize these registers. - */ - e_dbg("Initializing the Flow Control address, type and timer regs\n"); - ew32(FCT, FLOW_CONTROL_TYPE); - ew32(FCAH, FLOW_CONTROL_ADDRESS_HIGH); - ew32(FCAL, FLOW_CONTROL_ADDRESS_LOW); - - ew32(FCTTV, hw->fc.pause_time); - - return e1000e_set_fc_watermarks(hw); -} - -/** - * e1000_commit_fc_settings_generic - Configure flow control - * @hw: pointer to the HW structure - * - * Write the flow control settings to the Transmit Config Word Register (TXCW) - * base on the flow control settings in e1000_mac_info. - **/ -static s32 e1000_commit_fc_settings_generic(struct e1000_hw *hw) -{ - struct e1000_mac_info *mac = &hw->mac; - u32 txcw; - - /* - * Check for a software override of the flow control settings, and - * setup the device accordingly. If auto-negotiation is enabled, then - * software will have to set the "PAUSE" bits to the correct value in - * the Transmit Config Word Register (TXCW) and re-start auto- - * negotiation. However, if auto-negotiation is disabled, then - * software will have to manually configure the two flow control enable - * bits in the CTRL register. - * - * The possible values of the "fc" parameter are: - * 0: Flow control is completely disabled - * 1: Rx flow control is enabled (we can receive pause frames, - * but not send pause frames). - * 2: Tx flow control is enabled (we can send pause frames but we - * do not support receiving pause frames). - * 3: Both Rx and Tx flow control (symmetric) are enabled. - */ - switch (hw->fc.current_mode) { - case e1000_fc_none: - /* Flow control completely disabled by a software over-ride. */ - txcw = (E1000_TXCW_ANE | E1000_TXCW_FD); - break; - case e1000_fc_rx_pause: - /* - * Rx Flow control is enabled and Tx Flow control is disabled - * by a software over-ride. Since there really isn't a way to - * advertise that we are capable of Rx Pause ONLY, we will - * advertise that we support both symmetric and asymmetric Rx - * PAUSE. Later, we will disable the adapter's ability to send - * PAUSE frames. - */ - txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK); - break; - case e1000_fc_tx_pause: - /* - * Tx Flow control is enabled, and Rx Flow control is disabled, - * by a software over-ride. - */ - txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_ASM_DIR); - break; - case e1000_fc_full: - /* - * Flow control (both Rx and Tx) is enabled by a software - * over-ride. - */ - txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK); - break; - default: - e_dbg("Flow control param set incorrectly\n"); - return -E1000_ERR_CONFIG; - break; - } - - ew32(TXCW, txcw); - mac->txcw = txcw; - - return 0; -} - -/** - * e1000_poll_fiber_serdes_link_generic - Poll for link up - * @hw: pointer to the HW structure - * - * Polls for link up by reading the status register, if link fails to come - * up with auto-negotiation, then the link is forced if a signal is detected. - **/ -static s32 e1000_poll_fiber_serdes_link_generic(struct e1000_hw *hw) -{ - struct e1000_mac_info *mac = &hw->mac; - u32 i, status; - s32 ret_val; - - /* - * If we have a signal (the cable is plugged in, or assumed true for - * serdes media) then poll for a "Link-Up" indication in the Device - * Status Register. Time-out if a link isn't seen in 500 milliseconds - * seconds (Auto-negotiation should complete in less than 500 - * milliseconds even if the other end is doing it in SW). - */ - for (i = 0; i < FIBER_LINK_UP_LIMIT; i++) { - usleep_range(10000, 20000); - status = er32(STATUS); - if (status & E1000_STATUS_LU) - break; - } - if (i == FIBER_LINK_UP_LIMIT) { - e_dbg("Never got a valid link from auto-neg!!!\n"); - mac->autoneg_failed = 1; - /* - * AutoNeg failed to achieve a link, so we'll call - * mac->check_for_link. This routine will force the - * link up if we detect a signal. This will allow us to - * communicate with non-autonegotiating link partners. - */ - ret_val = mac->ops.check_for_link(hw); - if (ret_val) { - e_dbg("Error while checking for link\n"); - return ret_val; - } - mac->autoneg_failed = 0; - } else { - mac->autoneg_failed = 0; - e_dbg("Valid Link Found\n"); - } - - return 0; -} - -/** - * e1000e_setup_fiber_serdes_link - Setup link for fiber/serdes - * @hw: pointer to the HW structure - * - * Configures collision distance and flow control for fiber and serdes - * links. Upon successful setup, poll for link. - **/ -s32 e1000e_setup_fiber_serdes_link(struct e1000_hw *hw) -{ - u32 ctrl; - s32 ret_val; - - ctrl = er32(CTRL); - - /* Take the link out of reset */ - ctrl &= ~E1000_CTRL_LRST; - - e1000e_config_collision_dist(hw); - - ret_val = e1000_commit_fc_settings_generic(hw); - if (ret_val) - return ret_val; - - /* - * Since auto-negotiation is enabled, take the link out of reset (the - * link will be in reset, because we previously reset the chip). This - * will restart auto-negotiation. If auto-negotiation is successful - * then the link-up status bit will be set and the flow control enable - * bits (RFCE and TFCE) will be set according to their negotiated value. - */ - e_dbg("Auto-negotiation enabled\n"); - - ew32(CTRL, ctrl); - e1e_flush(); - usleep_range(1000, 2000); - - /* - * For these adapters, the SW definable pin 1 is set when the optics - * detect a signal. If we have a signal, then poll for a "Link-Up" - * indication. - */ - if (hw->phy.media_type == e1000_media_type_internal_serdes || - (er32(CTRL) & E1000_CTRL_SWDPIN1)) { - ret_val = e1000_poll_fiber_serdes_link_generic(hw); - } else { - e_dbg("No signal detected\n"); - } - - return 0; -} - -/** - * e1000e_config_collision_dist - Configure collision distance - * @hw: pointer to the HW structure - * - * Configures the collision distance to the default value and is used - * during link setup. Currently no func pointer exists and all - * implementations are handled in the generic version of this function. - **/ -void e1000e_config_collision_dist(struct e1000_hw *hw) -{ - u32 tctl; - - tctl = er32(TCTL); - - tctl &= ~E1000_TCTL_COLD; - tctl |= E1000_COLLISION_DISTANCE << E1000_COLD_SHIFT; - - ew32(TCTL, tctl); - e1e_flush(); -} - -/** - * e1000e_set_fc_watermarks - Set flow control high/low watermarks - * @hw: pointer to the HW structure - * - * Sets the flow control high/low threshold (watermark) registers. If - * flow control XON frame transmission is enabled, then set XON frame - * transmission as well. - **/ -s32 e1000e_set_fc_watermarks(struct e1000_hw *hw) -{ - u32 fcrtl = 0, fcrth = 0; - - /* - * Set the flow control receive threshold registers. Normally, - * these registers will be set to a default threshold that may be - * adjusted later by the driver's runtime code. However, if the - * ability to transmit pause frames is not enabled, then these - * registers will be set to 0. - */ - if (hw->fc.current_mode & e1000_fc_tx_pause) { - /* - * We need to set up the Receive Threshold high and low water - * marks as well as (optionally) enabling the transmission of - * XON frames. - */ - fcrtl = hw->fc.low_water; - fcrtl |= E1000_FCRTL_XONE; - fcrth = hw->fc.high_water; - } - ew32(FCRTL, fcrtl); - ew32(FCRTH, fcrth); - - return 0; -} - -/** - * e1000e_force_mac_fc - Force the MAC's flow control settings - * @hw: pointer to the HW structure - * - * Force the MAC's flow control settings. Sets the TFCE and RFCE bits in the - * device control register to reflect the adapter settings. TFCE and RFCE - * need to be explicitly set by software when a copper PHY is used because - * autonegotiation is managed by the PHY rather than the MAC. Software must - * also configure these bits when link is forced on a fiber connection. - **/ -s32 e1000e_force_mac_fc(struct e1000_hw *hw) -{ - u32 ctrl; - - ctrl = er32(CTRL); - - /* - * Because we didn't get link via the internal auto-negotiation - * mechanism (we either forced link or we got link via PHY - * auto-neg), we have to manually enable/disable transmit an - * receive flow control. - * - * The "Case" statement below enables/disable flow control - * according to the "hw->fc.current_mode" parameter. - * - * The possible values of the "fc" parameter are: - * 0: Flow control is completely disabled - * 1: Rx flow control is enabled (we can receive pause - * frames but not send pause frames). - * 2: Tx flow control is enabled (we can send pause frames - * frames but we do not receive pause frames). - * 3: Both Rx and Tx flow control (symmetric) is enabled. - * other: No other values should be possible at this point. - */ - e_dbg("hw->fc.current_mode = %u\n", hw->fc.current_mode); - - switch (hw->fc.current_mode) { - case e1000_fc_none: - ctrl &= (~(E1000_CTRL_TFCE | E1000_CTRL_RFCE)); - break; - case e1000_fc_rx_pause: - ctrl &= (~E1000_CTRL_TFCE); - ctrl |= E1000_CTRL_RFCE; - break; - case e1000_fc_tx_pause: - ctrl &= (~E1000_CTRL_RFCE); - ctrl |= E1000_CTRL_TFCE; - break; - case e1000_fc_full: - ctrl |= (E1000_CTRL_TFCE | E1000_CTRL_RFCE); - break; - default: - e_dbg("Flow control param set incorrectly\n"); - return -E1000_ERR_CONFIG; - } - - ew32(CTRL, ctrl); - - return 0; -} - -/** - * e1000e_config_fc_after_link_up - Configures flow control after link - * @hw: pointer to the HW structure - * - * Checks the status of auto-negotiation after link up to ensure that the - * speed and duplex were not forced. If the link needed to be forced, then - * flow control needs to be forced also. If auto-negotiation is enabled - * and did not fail, then we configure flow control based on our link - * partner. - **/ -s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) -{ - struct e1000_mac_info *mac = &hw->mac; - s32 ret_val = 0; - u16 mii_status_reg, mii_nway_adv_reg, mii_nway_lp_ability_reg; - u16 speed, duplex; - - /* - * Check for the case where we have fiber media and auto-neg failed - * so we had to force link. In this case, we need to force the - * configuration of the MAC to match the "fc" parameter. - */ - if (mac->autoneg_failed) { - if (hw->phy.media_type == e1000_media_type_fiber || - hw->phy.media_type == e1000_media_type_internal_serdes) - ret_val = e1000e_force_mac_fc(hw); - } else { - if (hw->phy.media_type == e1000_media_type_copper) - ret_val = e1000e_force_mac_fc(hw); - } - - if (ret_val) { - e_dbg("Error forcing flow control settings\n"); - return ret_val; - } - - /* - * Check for the case where we have copper media and auto-neg is - * enabled. In this case, we need to check and see if Auto-Neg - * has completed, and if so, how the PHY and link partner has - * flow control configured. - */ - if ((hw->phy.media_type == e1000_media_type_copper) && mac->autoneg) { - /* - * Read the MII Status Register and check to see if AutoNeg - * has completed. We read this twice because this reg has - * some "sticky" (latched) bits. - */ - ret_val = e1e_rphy(hw, PHY_STATUS, &mii_status_reg); - if (ret_val) - return ret_val; - ret_val = e1e_rphy(hw, PHY_STATUS, &mii_status_reg); - if (ret_val) - return ret_val; - - if (!(mii_status_reg & MII_SR_AUTONEG_COMPLETE)) { - e_dbg("Copper PHY and Auto Neg " - "has not completed.\n"); - return ret_val; - } - - /* - * The AutoNeg process has completed, so we now need to - * read both the Auto Negotiation Advertisement - * Register (Address 4) and the Auto_Negotiation Base - * Page Ability Register (Address 5) to determine how - * flow control was negotiated. - */ - ret_val = e1e_rphy(hw, PHY_AUTONEG_ADV, &mii_nway_adv_reg); - if (ret_val) - return ret_val; - ret_val = - e1e_rphy(hw, PHY_LP_ABILITY, &mii_nway_lp_ability_reg); - if (ret_val) - return ret_val; - - /* - * Two bits in the Auto Negotiation Advertisement Register - * (Address 4) and two bits in the Auto Negotiation Base - * Page Ability Register (Address 5) determine flow control - * for both the PHY and the link partner. The following - * table, taken out of the IEEE 802.3ab/D6.0 dated March 25, - * 1999, describes these PAUSE resolution bits and how flow - * control is determined based upon these settings. - * NOTE: DC = Don't Care - * - * LOCAL DEVICE | LINK PARTNER - * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution - *-------|---------|-------|---------|-------------------- - * 0 | 0 | DC | DC | e1000_fc_none - * 0 | 1 | 0 | DC | e1000_fc_none - * 0 | 1 | 1 | 0 | e1000_fc_none - * 0 | 1 | 1 | 1 | e1000_fc_tx_pause - * 1 | 0 | 0 | DC | e1000_fc_none - * 1 | DC | 1 | DC | e1000_fc_full - * 1 | 1 | 0 | 0 | e1000_fc_none - * 1 | 1 | 0 | 1 | e1000_fc_rx_pause - * - * Are both PAUSE bits set to 1? If so, this implies - * Symmetric Flow Control is enabled at both ends. The - * ASM_DIR bits are irrelevant per the spec. - * - * For Symmetric Flow Control: - * - * LOCAL DEVICE | LINK PARTNER - * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result - *-------|---------|-------|---------|-------------------- - * 1 | DC | 1 | DC | E1000_fc_full - * - */ - if ((mii_nway_adv_reg & NWAY_AR_PAUSE) && - (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE)) { - /* - * Now we need to check if the user selected Rx ONLY - * of pause frames. In this case, we had to advertise - * FULL flow control because we could not advertise Rx - * ONLY. Hence, we must now check to see if we need to - * turn OFF the TRANSMISSION of PAUSE frames. - */ - if (hw->fc.requested_mode == e1000_fc_full) { - hw->fc.current_mode = e1000_fc_full; - e_dbg("Flow Control = FULL.\r\n"); - } else { - hw->fc.current_mode = e1000_fc_rx_pause; - e_dbg("Flow Control = " - "Rx PAUSE frames only.\r\n"); - } - } - /* - * For receiving PAUSE frames ONLY. - * - * LOCAL DEVICE | LINK PARTNER - * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result - *-------|---------|-------|---------|-------------------- - * 0 | 1 | 1 | 1 | e1000_fc_tx_pause - */ - else if (!(mii_nway_adv_reg & NWAY_AR_PAUSE) && - (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && - (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && - (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { - hw->fc.current_mode = e1000_fc_tx_pause; - e_dbg("Flow Control = Tx PAUSE frames only.\r\n"); - } - /* - * For transmitting PAUSE frames ONLY. - * - * LOCAL DEVICE | LINK PARTNER - * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result - *-------|---------|-------|---------|-------------------- - * 1 | 1 | 0 | 1 | e1000_fc_rx_pause - */ - else if ((mii_nway_adv_reg & NWAY_AR_PAUSE) && - (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && - !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && - (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { - hw->fc.current_mode = e1000_fc_rx_pause; - e_dbg("Flow Control = Rx PAUSE frames only.\r\n"); - } else { - /* - * Per the IEEE spec, at this point flow control - * should be disabled. - */ - hw->fc.current_mode = e1000_fc_none; - e_dbg("Flow Control = NONE.\r\n"); - } - - /* - * Now we need to do one last check... If we auto- - * negotiated to HALF DUPLEX, flow control should not be - * enabled per IEEE 802.3 spec. - */ - ret_val = mac->ops.get_link_up_info(hw, &speed, &duplex); - if (ret_val) { - e_dbg("Error getting link speed and duplex\n"); - return ret_val; - } - - if (duplex == HALF_DUPLEX) - hw->fc.current_mode = e1000_fc_none; - - /* - * Now we call a subroutine to actually force the MAC - * controller to use the correct flow control settings. - */ - ret_val = e1000e_force_mac_fc(hw); - if (ret_val) { - e_dbg("Error forcing flow control settings\n"); - return ret_val; - } - } - - return 0; -} - -/** - * e1000e_get_speed_and_duplex_copper - Retrieve current speed/duplex - * @hw: pointer to the HW structure - * @speed: stores the current speed - * @duplex: stores the current duplex - * - * Read the status register for the current speed/duplex and store the current - * speed and duplex for copper connections. - **/ -s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, u16 *duplex) -{ - u32 status; - - status = er32(STATUS); - if (status & E1000_STATUS_SPEED_1000) - *speed = SPEED_1000; - else if (status & E1000_STATUS_SPEED_100) - *speed = SPEED_100; - else - *speed = SPEED_10; - - if (status & E1000_STATUS_FD) - *duplex = FULL_DUPLEX; - else - *duplex = HALF_DUPLEX; - - e_dbg("%u Mbps, %s Duplex\n", - *speed == SPEED_1000 ? 1000 : *speed == SPEED_100 ? 100 : 10, - *duplex == FULL_DUPLEX ? "Full" : "Half"); - - return 0; -} - -/** - * e1000e_get_speed_and_duplex_fiber_serdes - Retrieve current speed/duplex - * @hw: pointer to the HW structure - * @speed: stores the current speed - * @duplex: stores the current duplex - * - * Sets the speed and duplex to gigabit full duplex (the only possible option) - * for fiber/serdes links. - **/ -s32 e1000e_get_speed_and_duplex_fiber_serdes(struct e1000_hw *hw, u16 *speed, u16 *duplex) -{ - *speed = SPEED_1000; - *duplex = FULL_DUPLEX; - - return 0; -} - -/** - * e1000e_get_hw_semaphore - Acquire hardware semaphore - * @hw: pointer to the HW structure - * - * Acquire the HW semaphore to access the PHY or NVM - **/ -s32 e1000e_get_hw_semaphore(struct e1000_hw *hw) -{ - u32 swsm; - s32 timeout = hw->nvm.word_size + 1; - s32 i = 0; - - /* Get the SW semaphore */ - while (i < timeout) { - swsm = er32(SWSM); - if (!(swsm & E1000_SWSM_SMBI)) - break; - - udelay(50); - i++; - } - - if (i == timeout) { - e_dbg("Driver can't access device - SMBI bit is set.\n"); - return -E1000_ERR_NVM; - } - - /* Get the FW semaphore. */ - for (i = 0; i < timeout; i++) { - swsm = er32(SWSM); - ew32(SWSM, swsm | E1000_SWSM_SWESMBI); - - /* Semaphore acquired if bit latched */ - if (er32(SWSM) & E1000_SWSM_SWESMBI) - break; - - udelay(50); - } - - if (i == timeout) { - /* Release semaphores */ - e1000e_put_hw_semaphore(hw); - e_dbg("Driver can't access the NVM\n"); - return -E1000_ERR_NVM; - } - - return 0; -} - -/** - * e1000e_put_hw_semaphore - Release hardware semaphore - * @hw: pointer to the HW structure - * - * Release hardware semaphore used to access the PHY or NVM - **/ -void e1000e_put_hw_semaphore(struct e1000_hw *hw) -{ - u32 swsm; - - swsm = er32(SWSM); - swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI); - ew32(SWSM, swsm); -} - -/** - * e1000e_get_auto_rd_done - Check for auto read completion - * @hw: pointer to the HW structure - * - * Check EEPROM for Auto Read done bit. - **/ -s32 e1000e_get_auto_rd_done(struct e1000_hw *hw) -{ - s32 i = 0; - - while (i < AUTO_READ_DONE_TIMEOUT) { - if (er32(EECD) & E1000_EECD_AUTO_RD) - break; - usleep_range(1000, 2000); - i++; - } - - if (i == AUTO_READ_DONE_TIMEOUT) { - e_dbg("Auto read by HW from NVM has not completed.\n"); - return -E1000_ERR_RESET; - } - - return 0; -} - -/** - * e1000e_valid_led_default - Verify a valid default LED config - * @hw: pointer to the HW structure - * @data: pointer to the NVM (EEPROM) - * - * Read the EEPROM for the current default LED configuration. If the - * LED configuration is not valid, set to a valid LED configuration. - **/ -s32 e1000e_valid_led_default(struct e1000_hw *hw, u16 *data) -{ - s32 ret_val; - - ret_val = e1000_read_nvm(hw, NVM_ID_LED_SETTINGS, 1, data); - if (ret_val) { - e_dbg("NVM Read Error\n"); - return ret_val; - } - - if (*data == ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF) - *data = ID_LED_DEFAULT; - - return 0; -} - -/** - * e1000e_id_led_init - - * @hw: pointer to the HW structure - * - **/ -s32 e1000e_id_led_init(struct e1000_hw *hw) -{ - struct e1000_mac_info *mac = &hw->mac; - s32 ret_val; - const u32 ledctl_mask = 0x000000FF; - const u32 ledctl_on = E1000_LEDCTL_MODE_LED_ON; - const u32 ledctl_off = E1000_LEDCTL_MODE_LED_OFF; - u16 data, i, temp; - const u16 led_mask = 0x0F; - - ret_val = hw->nvm.ops.valid_led_default(hw, &data); - if (ret_val) - return ret_val; - - mac->ledctl_default = er32(LEDCTL); - mac->ledctl_mode1 = mac->ledctl_default; - mac->ledctl_mode2 = mac->ledctl_default; - - for (i = 0; i < 4; i++) { - temp = (data >> (i << 2)) & led_mask; - switch (temp) { - case ID_LED_ON1_DEF2: - case ID_LED_ON1_ON2: - case ID_LED_ON1_OFF2: - mac->ledctl_mode1 &= ~(ledctl_mask << (i << 3)); - mac->ledctl_mode1 |= ledctl_on << (i << 3); - break; - case ID_LED_OFF1_DEF2: - case ID_LED_OFF1_ON2: - case ID_LED_OFF1_OFF2: - mac->ledctl_mode1 &= ~(ledctl_mask << (i << 3)); - mac->ledctl_mode1 |= ledctl_off << (i << 3); - break; - default: - /* Do nothing */ - break; - } - switch (temp) { - case ID_LED_DEF1_ON2: - case ID_LED_ON1_ON2: - case ID_LED_OFF1_ON2: - mac->ledctl_mode2 &= ~(ledctl_mask << (i << 3)); - mac->ledctl_mode2 |= ledctl_on << (i << 3); - break; - case ID_LED_DEF1_OFF2: - case ID_LED_ON1_OFF2: - case ID_LED_OFF1_OFF2: - mac->ledctl_mode2 &= ~(ledctl_mask << (i << 3)); - mac->ledctl_mode2 |= ledctl_off << (i << 3); - break; - default: - /* Do nothing */ - break; - } - } - - return 0; -} - -/** - * e1000e_setup_led_generic - Configures SW controllable LED - * @hw: pointer to the HW structure - * - * This prepares the SW controllable LED for use and saves the current state - * of the LED so it can be later restored. - **/ -s32 e1000e_setup_led_generic(struct e1000_hw *hw) -{ - u32 ledctl; - - if (hw->mac.ops.setup_led != e1000e_setup_led_generic) - return -E1000_ERR_CONFIG; - - if (hw->phy.media_type == e1000_media_type_fiber) { - ledctl = er32(LEDCTL); - hw->mac.ledctl_default = ledctl; - /* Turn off LED0 */ - ledctl &= ~(E1000_LEDCTL_LED0_IVRT | - E1000_LEDCTL_LED0_BLINK | - E1000_LEDCTL_LED0_MODE_MASK); - ledctl |= (E1000_LEDCTL_MODE_LED_OFF << - E1000_LEDCTL_LED0_MODE_SHIFT); - ew32(LEDCTL, ledctl); - } else if (hw->phy.media_type == e1000_media_type_copper) { - ew32(LEDCTL, hw->mac.ledctl_mode1); - } - - return 0; -} - -/** - * e1000e_cleanup_led_generic - Set LED config to default operation - * @hw: pointer to the HW structure - * - * Remove the current LED configuration and set the LED configuration - * to the default value, saved from the EEPROM. - **/ -s32 e1000e_cleanup_led_generic(struct e1000_hw *hw) -{ - ew32(LEDCTL, hw->mac.ledctl_default); - return 0; -} - -/** - * e1000e_blink_led_generic - Blink LED - * @hw: pointer to the HW structure - * - * Blink the LEDs which are set to be on. - **/ -s32 e1000e_blink_led_generic(struct e1000_hw *hw) -{ - u32 ledctl_blink = 0; - u32 i; - - if (hw->phy.media_type == e1000_media_type_fiber) { - /* always blink LED0 for PCI-E fiber */ - ledctl_blink = E1000_LEDCTL_LED0_BLINK | - (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED0_MODE_SHIFT); - } else { - /* - * set the blink bit for each LED that's "on" (0x0E) - * in ledctl_mode2 - */ - ledctl_blink = hw->mac.ledctl_mode2; - for (i = 0; i < 4; i++) - if (((hw->mac.ledctl_mode2 >> (i * 8)) & 0xFF) == - E1000_LEDCTL_MODE_LED_ON) - ledctl_blink |= (E1000_LEDCTL_LED0_BLINK << - (i * 8)); - } - - ew32(LEDCTL, ledctl_blink); - - return 0; -} - -/** - * e1000e_led_on_generic - Turn LED on - * @hw: pointer to the HW structure - * - * Turn LED on. - **/ -s32 e1000e_led_on_generic(struct e1000_hw *hw) -{ - u32 ctrl; - - switch (hw->phy.media_type) { - case e1000_media_type_fiber: - ctrl = er32(CTRL); - ctrl &= ~E1000_CTRL_SWDPIN0; - ctrl |= E1000_CTRL_SWDPIO0; - ew32(CTRL, ctrl); - break; - case e1000_media_type_copper: - ew32(LEDCTL, hw->mac.ledctl_mode2); - break; - default: - break; - } - - return 0; -} - -/** - * e1000e_led_off_generic - Turn LED off - * @hw: pointer to the HW structure - * - * Turn LED off. - **/ -s32 e1000e_led_off_generic(struct e1000_hw *hw) -{ - u32 ctrl; - - switch (hw->phy.media_type) { - case e1000_media_type_fiber: - ctrl = er32(CTRL); - ctrl |= E1000_CTRL_SWDPIN0; - ctrl |= E1000_CTRL_SWDPIO0; - ew32(CTRL, ctrl); - break; - case e1000_media_type_copper: - ew32(LEDCTL, hw->mac.ledctl_mode1); - break; - default: - break; - } - - return 0; -} - -/** - * e1000e_set_pcie_no_snoop - Set PCI-express capabilities - * @hw: pointer to the HW structure - * @no_snoop: bitmap of snoop events - * - * Set the PCI-express register to snoop for events enabled in 'no_snoop'. - **/ -void e1000e_set_pcie_no_snoop(struct e1000_hw *hw, u32 no_snoop) -{ - u32 gcr; - - if (no_snoop) { - gcr = er32(GCR); - gcr &= ~(PCIE_NO_SNOOP_ALL); - gcr |= no_snoop; - ew32(GCR, gcr); - } -} - -/** - * e1000e_disable_pcie_master - Disables PCI-express master access - * @hw: pointer to the HW structure - * - * Returns 0 if successful, else returns -10 - * (-E1000_ERR_MASTER_REQUESTS_PENDING) if master disable bit has not caused - * the master requests to be disabled. - * - * Disables PCI-Express master access and verifies there are no pending - * requests. - **/ -s32 e1000e_disable_pcie_master(struct e1000_hw *hw) -{ - u32 ctrl; - s32 timeout = MASTER_DISABLE_TIMEOUT; - - ctrl = er32(CTRL); - ctrl |= E1000_CTRL_GIO_MASTER_DISABLE; - ew32(CTRL, ctrl); - - while (timeout) { - if (!(er32(STATUS) & - E1000_STATUS_GIO_MASTER_ENABLE)) - break; - udelay(100); - timeout--; - } - - if (!timeout) { - e_dbg("Master requests are pending.\n"); - return -E1000_ERR_MASTER_REQUESTS_PENDING; - } - - return 0; -} - -/** - * e1000e_reset_adaptive - Reset Adaptive Interframe Spacing - * @hw: pointer to the HW structure - * - * Reset the Adaptive Interframe Spacing throttle to default values. - **/ -void e1000e_reset_adaptive(struct e1000_hw *hw) -{ - struct e1000_mac_info *mac = &hw->mac; - - if (!mac->adaptive_ifs) { - e_dbg("Not in Adaptive IFS mode!\n"); - goto out; - } - - mac->current_ifs_val = 0; - mac->ifs_min_val = IFS_MIN; - mac->ifs_max_val = IFS_MAX; - mac->ifs_step_size = IFS_STEP; - mac->ifs_ratio = IFS_RATIO; - - mac->in_ifs_mode = false; - ew32(AIT, 0); -out: - return; -} - -/** - * e1000e_update_adaptive - Update Adaptive Interframe Spacing - * @hw: pointer to the HW structure - * - * Update the Adaptive Interframe Spacing Throttle value based on the - * time between transmitted packets and time between collisions. - **/ -void e1000e_update_adaptive(struct e1000_hw *hw) -{ - struct e1000_mac_info *mac = &hw->mac; - - if (!mac->adaptive_ifs) { - e_dbg("Not in Adaptive IFS mode!\n"); - goto out; - } - - if ((mac->collision_delta * mac->ifs_ratio) > mac->tx_packet_delta) { - if (mac->tx_packet_delta > MIN_NUM_XMITS) { - mac->in_ifs_mode = true; - if (mac->current_ifs_val < mac->ifs_max_val) { - if (!mac->current_ifs_val) - mac->current_ifs_val = mac->ifs_min_val; - else - mac->current_ifs_val += - mac->ifs_step_size; - ew32(AIT, mac->current_ifs_val); - } - } - } else { - if (mac->in_ifs_mode && - (mac->tx_packet_delta <= MIN_NUM_XMITS)) { - mac->current_ifs_val = 0; - mac->in_ifs_mode = false; - ew32(AIT, 0); - } - } -out: - return; -} - -/** - * e1000_raise_eec_clk - Raise EEPROM clock - * @hw: pointer to the HW structure - * @eecd: pointer to the EEPROM - * - * Enable/Raise the EEPROM clock bit. - **/ -static void e1000_raise_eec_clk(struct e1000_hw *hw, u32 *eecd) -{ - *eecd = *eecd | E1000_EECD_SK; - ew32(EECD, *eecd); - e1e_flush(); - udelay(hw->nvm.delay_usec); -} - -/** - * e1000_lower_eec_clk - Lower EEPROM clock - * @hw: pointer to the HW structure - * @eecd: pointer to the EEPROM - * - * Clear/Lower the EEPROM clock bit. - **/ -static void e1000_lower_eec_clk(struct e1000_hw *hw, u32 *eecd) -{ - *eecd = *eecd & ~E1000_EECD_SK; - ew32(EECD, *eecd); - e1e_flush(); - udelay(hw->nvm.delay_usec); -} - -/** - * e1000_shift_out_eec_bits - Shift data bits our to the EEPROM - * @hw: pointer to the HW structure - * @data: data to send to the EEPROM - * @count: number of bits to shift out - * - * We need to shift 'count' bits out to the EEPROM. So, the value in the - * "data" parameter will be shifted out to the EEPROM one bit at a time. - * In order to do this, "data" must be broken down into bits. - **/ -static void e1000_shift_out_eec_bits(struct e1000_hw *hw, u16 data, u16 count) -{ - struct e1000_nvm_info *nvm = &hw->nvm; - u32 eecd = er32(EECD); - u32 mask; - - mask = 0x01 << (count - 1); - if (nvm->type == e1000_nvm_eeprom_spi) - eecd |= E1000_EECD_DO; - - do { - eecd &= ~E1000_EECD_DI; - - if (data & mask) - eecd |= E1000_EECD_DI; - - ew32(EECD, eecd); - e1e_flush(); - - udelay(nvm->delay_usec); - - e1000_raise_eec_clk(hw, &eecd); - e1000_lower_eec_clk(hw, &eecd); - - mask >>= 1; - } while (mask); - - eecd &= ~E1000_EECD_DI; - ew32(EECD, eecd); -} - -/** - * e1000_shift_in_eec_bits - Shift data bits in from the EEPROM - * @hw: pointer to the HW structure - * @count: number of bits to shift in - * - * In order to read a register from the EEPROM, we need to shift 'count' bits - * in from the EEPROM. Bits are "shifted in" by raising the clock input to - * the EEPROM (setting the SK bit), and then reading the value of the data out - * "DO" bit. During this "shifting in" process the data in "DI" bit should - * always be clear. - **/ -static u16 e1000_shift_in_eec_bits(struct e1000_hw *hw, u16 count) -{ - u32 eecd; - u32 i; - u16 data; - - eecd = er32(EECD); - - eecd &= ~(E1000_EECD_DO | E1000_EECD_DI); - data = 0; - - for (i = 0; i < count; i++) { - data <<= 1; - e1000_raise_eec_clk(hw, &eecd); - - eecd = er32(EECD); - - eecd &= ~E1000_EECD_DI; - if (eecd & E1000_EECD_DO) - data |= 1; - - e1000_lower_eec_clk(hw, &eecd); - } - - return data; -} - -/** - * e1000e_poll_eerd_eewr_done - Poll for EEPROM read/write completion - * @hw: pointer to the HW structure - * @ee_reg: EEPROM flag for polling - * - * Polls the EEPROM status bit for either read or write completion based - * upon the value of 'ee_reg'. - **/ -s32 e1000e_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg) -{ - u32 attempts = 100000; - u32 i, reg = 0; - - for (i = 0; i < attempts; i++) { - if (ee_reg == E1000_NVM_POLL_READ) - reg = er32(EERD); - else - reg = er32(EEWR); - - if (reg & E1000_NVM_RW_REG_DONE) - return 0; - - udelay(5); - } - - return -E1000_ERR_NVM; -} - -/** - * e1000e_acquire_nvm - Generic request for access to EEPROM - * @hw: pointer to the HW structure - * - * Set the EEPROM access request bit and wait for EEPROM access grant bit. - * Return successful if access grant bit set, else clear the request for - * EEPROM access and return -E1000_ERR_NVM (-1). - **/ -s32 e1000e_acquire_nvm(struct e1000_hw *hw) -{ - u32 eecd = er32(EECD); - s32 timeout = E1000_NVM_GRANT_ATTEMPTS; - - ew32(EECD, eecd | E1000_EECD_REQ); - eecd = er32(EECD); - - while (timeout) { - if (eecd & E1000_EECD_GNT) - break; - udelay(5); - eecd = er32(EECD); - timeout--; - } - - if (!timeout) { - eecd &= ~E1000_EECD_REQ; - ew32(EECD, eecd); - e_dbg("Could not acquire NVM grant\n"); - return -E1000_ERR_NVM; - } - - return 0; -} - -/** - * e1000_standby_nvm - Return EEPROM to standby state - * @hw: pointer to the HW structure - * - * Return the EEPROM to a standby state. - **/ -static void e1000_standby_nvm(struct e1000_hw *hw) -{ - struct e1000_nvm_info *nvm = &hw->nvm; - u32 eecd = er32(EECD); - - if (nvm->type == e1000_nvm_eeprom_spi) { - /* Toggle CS to flush commands */ - eecd |= E1000_EECD_CS; - ew32(EECD, eecd); - e1e_flush(); - udelay(nvm->delay_usec); - eecd &= ~E1000_EECD_CS; - ew32(EECD, eecd); - e1e_flush(); - udelay(nvm->delay_usec); - } -} - -/** - * e1000_stop_nvm - Terminate EEPROM command - * @hw: pointer to the HW structure - * - * Terminates the current command by inverting the EEPROM's chip select pin. - **/ -static void e1000_stop_nvm(struct e1000_hw *hw) -{ - u32 eecd; - - eecd = er32(EECD); - if (hw->nvm.type == e1000_nvm_eeprom_spi) { - /* Pull CS high */ - eecd |= E1000_EECD_CS; - e1000_lower_eec_clk(hw, &eecd); - } -} - -/** - * e1000e_release_nvm - Release exclusive access to EEPROM - * @hw: pointer to the HW structure - * - * Stop any current commands to the EEPROM and clear the EEPROM request bit. - **/ -void e1000e_release_nvm(struct e1000_hw *hw) -{ - u32 eecd; - - e1000_stop_nvm(hw); - - eecd = er32(EECD); - eecd &= ~E1000_EECD_REQ; - ew32(EECD, eecd); -} - -/** - * e1000_ready_nvm_eeprom - Prepares EEPROM for read/write - * @hw: pointer to the HW structure - * - * Setups the EEPROM for reading and writing. - **/ -static s32 e1000_ready_nvm_eeprom(struct e1000_hw *hw) -{ - struct e1000_nvm_info *nvm = &hw->nvm; - u32 eecd = er32(EECD); - u8 spi_stat_reg; - - if (nvm->type == e1000_nvm_eeprom_spi) { - u16 timeout = NVM_MAX_RETRY_SPI; - - /* Clear SK and CS */ - eecd &= ~(E1000_EECD_CS | E1000_EECD_SK); - ew32(EECD, eecd); - e1e_flush(); - udelay(1); - - /* - * Read "Status Register" repeatedly until the LSB is cleared. - * The EEPROM will signal that the command has been completed - * by clearing bit 0 of the internal status register. If it's - * not cleared within 'timeout', then error out. - */ - while (timeout) { - e1000_shift_out_eec_bits(hw, NVM_RDSR_OPCODE_SPI, - hw->nvm.opcode_bits); - spi_stat_reg = (u8)e1000_shift_in_eec_bits(hw, 8); - if (!(spi_stat_reg & NVM_STATUS_RDY_SPI)) - break; - - udelay(5); - e1000_standby_nvm(hw); - timeout--; - } - - if (!timeout) { - e_dbg("SPI NVM Status error\n"); - return -E1000_ERR_NVM; - } - } - - return 0; -} - -/** - * e1000e_read_nvm_eerd - Reads EEPROM using EERD register - * @hw: pointer to the HW structure - * @offset: offset of word in the EEPROM to read - * @words: number of words to read - * @data: word read from the EEPROM - * - * Reads a 16 bit word from the EEPROM using the EERD register. - **/ -s32 e1000e_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) -{ - struct e1000_nvm_info *nvm = &hw->nvm; - u32 i, eerd = 0; - s32 ret_val = 0; - - /* - * A check for invalid values: offset too large, too many words, - * too many words for the offset, and not enough words. - */ - if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || - (words == 0)) { - e_dbg("nvm parameter(s) out of bounds\n"); - return -E1000_ERR_NVM; - } - - for (i = 0; i < words; i++) { - eerd = ((offset+i) << E1000_NVM_RW_ADDR_SHIFT) + - E1000_NVM_RW_REG_START; - - ew32(EERD, eerd); - ret_val = e1000e_poll_eerd_eewr_done(hw, E1000_NVM_POLL_READ); - if (ret_val) - break; - - data[i] = (er32(EERD) >> E1000_NVM_RW_REG_DATA); - } - - return ret_val; -} - -/** - * e1000e_write_nvm_spi - Write to EEPROM using SPI - * @hw: pointer to the HW structure - * @offset: offset within the EEPROM to be written to - * @words: number of words to write - * @data: 16 bit word(s) to be written to the EEPROM - * - * Writes data to EEPROM at offset using SPI interface. - * - * If e1000e_update_nvm_checksum is not called after this function , the - * EEPROM will most likely contain an invalid checksum. - **/ -s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) -{ - struct e1000_nvm_info *nvm = &hw->nvm; - s32 ret_val; - u16 widx = 0; - - /* - * A check for invalid values: offset too large, too many words, - * and not enough words. - */ - if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || - (words == 0)) { - e_dbg("nvm parameter(s) out of bounds\n"); - return -E1000_ERR_NVM; - } - - ret_val = nvm->ops.acquire(hw); - if (ret_val) - return ret_val; - - while (widx < words) { - u8 write_opcode = NVM_WRITE_OPCODE_SPI; - - ret_val = e1000_ready_nvm_eeprom(hw); - if (ret_val) { - nvm->ops.release(hw); - return ret_val; - } - - e1000_standby_nvm(hw); - - /* Send the WRITE ENABLE command (8 bit opcode) */ - e1000_shift_out_eec_bits(hw, NVM_WREN_OPCODE_SPI, - nvm->opcode_bits); - - e1000_standby_nvm(hw); - - /* - * Some SPI eeproms use the 8th address bit embedded in the - * opcode - */ - if ((nvm->address_bits == 8) && (offset >= 128)) - write_opcode |= NVM_A8_OPCODE_SPI; - - /* Send the Write command (8-bit opcode + addr) */ - e1000_shift_out_eec_bits(hw, write_opcode, nvm->opcode_bits); - e1000_shift_out_eec_bits(hw, (u16)((offset + widx) * 2), - nvm->address_bits); - - /* Loop to allow for up to whole page write of eeprom */ - while (widx < words) { - u16 word_out = data[widx]; - word_out = (word_out >> 8) | (word_out << 8); - e1000_shift_out_eec_bits(hw, word_out, 16); - widx++; - - if ((((offset + widx) * 2) % nvm->page_size) == 0) { - e1000_standby_nvm(hw); - break; - } - } - } - - usleep_range(10000, 20000); - nvm->ops.release(hw); - return 0; -} - -/** - * e1000_read_pba_string_generic - Read device part number - * @hw: pointer to the HW structure - * @pba_num: pointer to device part number - * @pba_num_size: size of part number buffer - * - * Reads the product board assembly (PBA) number from the EEPROM and stores - * the value in pba_num. - **/ -s32 e1000_read_pba_string_generic(struct e1000_hw *hw, u8 *pba_num, - u32 pba_num_size) -{ - s32 ret_val; - u16 nvm_data; - u16 pba_ptr; - u16 offset; - u16 length; - - if (pba_num == NULL) { - e_dbg("PBA string buffer was null\n"); - ret_val = E1000_ERR_INVALID_ARGUMENT; - goto out; - } - - ret_val = e1000_read_nvm(hw, NVM_PBA_OFFSET_0, 1, &nvm_data); - if (ret_val) { - e_dbg("NVM Read Error\n"); - goto out; - } - - ret_val = e1000_read_nvm(hw, NVM_PBA_OFFSET_1, 1, &pba_ptr); - if (ret_val) { - e_dbg("NVM Read Error\n"); - goto out; - } - - /* - * if nvm_data is not ptr guard the PBA must be in legacy format which - * means pba_ptr is actually our second data word for the PBA number - * and we can decode it into an ascii string - */ - if (nvm_data != NVM_PBA_PTR_GUARD) { - e_dbg("NVM PBA number is not stored as string\n"); - - /* we will need 11 characters to store the PBA */ - if (pba_num_size < 11) { - e_dbg("PBA string buffer too small\n"); - return E1000_ERR_NO_SPACE; - } - - /* extract hex string from data and pba_ptr */ - pba_num[0] = (nvm_data >> 12) & 0xF; - pba_num[1] = (nvm_data >> 8) & 0xF; - pba_num[2] = (nvm_data >> 4) & 0xF; - pba_num[3] = nvm_data & 0xF; - pba_num[4] = (pba_ptr >> 12) & 0xF; - pba_num[5] = (pba_ptr >> 8) & 0xF; - pba_num[6] = '-'; - pba_num[7] = 0; - pba_num[8] = (pba_ptr >> 4) & 0xF; - pba_num[9] = pba_ptr & 0xF; - - /* put a null character on the end of our string */ - pba_num[10] = '\0'; - - /* switch all the data but the '-' to hex char */ - for (offset = 0; offset < 10; offset++) { - if (pba_num[offset] < 0xA) - pba_num[offset] += '0'; - else if (pba_num[offset] < 0x10) - pba_num[offset] += 'A' - 0xA; - } - - goto out; - } - - ret_val = e1000_read_nvm(hw, pba_ptr, 1, &length); - if (ret_val) { - e_dbg("NVM Read Error\n"); - goto out; - } - - if (length == 0xFFFF || length == 0) { - e_dbg("NVM PBA number section invalid length\n"); - ret_val = E1000_ERR_NVM_PBA_SECTION; - goto out; - } - /* check if pba_num buffer is big enough */ - if (pba_num_size < (((u32)length * 2) - 1)) { - e_dbg("PBA string buffer too small\n"); - ret_val = E1000_ERR_NO_SPACE; - goto out; - } - - /* trim pba length from start of string */ - pba_ptr++; - length--; - - for (offset = 0; offset < length; offset++) { - ret_val = e1000_read_nvm(hw, pba_ptr + offset, 1, &nvm_data); - if (ret_val) { - e_dbg("NVM Read Error\n"); - goto out; - } - pba_num[offset * 2] = (u8)(nvm_data >> 8); - pba_num[(offset * 2) + 1] = (u8)(nvm_data & 0xFF); - } - pba_num[offset * 2] = '\0'; - -out: - return ret_val; -} - -/** - * e1000_read_mac_addr_generic - Read device MAC address - * @hw: pointer to the HW structure - * - * Reads the device MAC address from the EEPROM and stores the value. - * Since devices with two ports use the same EEPROM, we increment the - * last bit in the MAC address for the second port. - **/ -s32 e1000_read_mac_addr_generic(struct e1000_hw *hw) -{ - u32 rar_high; - u32 rar_low; - u16 i; - - rar_high = er32(RAH(0)); - rar_low = er32(RAL(0)); - - for (i = 0; i < E1000_RAL_MAC_ADDR_LEN; i++) - hw->mac.perm_addr[i] = (u8)(rar_low >> (i*8)); - - for (i = 0; i < E1000_RAH_MAC_ADDR_LEN; i++) - hw->mac.perm_addr[i+4] = (u8)(rar_high >> (i*8)); - - for (i = 0; i < ETH_ALEN; i++) - hw->mac.addr[i] = hw->mac.perm_addr[i]; - - return 0; -} - -/** - * e1000e_validate_nvm_checksum_generic - Validate EEPROM checksum - * @hw: pointer to the HW structure - * - * Calculates the EEPROM checksum by reading/adding each word of the EEPROM - * and then verifies that the sum of the EEPROM is equal to 0xBABA. - **/ -s32 e1000e_validate_nvm_checksum_generic(struct e1000_hw *hw) -{ - s32 ret_val; - u16 checksum = 0; - u16 i, nvm_data; - - for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) { - ret_val = e1000_read_nvm(hw, i, 1, &nvm_data); - if (ret_val) { - e_dbg("NVM Read Error\n"); - return ret_val; - } - checksum += nvm_data; - } - - if (checksum != (u16) NVM_SUM) { - e_dbg("NVM Checksum Invalid\n"); - return -E1000_ERR_NVM; - } - - return 0; -} - -/** - * e1000e_update_nvm_checksum_generic - Update EEPROM checksum - * @hw: pointer to the HW structure - * - * Updates the EEPROM checksum by reading/adding each word of the EEPROM - * up to the checksum. Then calculates the EEPROM checksum and writes the - * value to the EEPROM. - **/ -s32 e1000e_update_nvm_checksum_generic(struct e1000_hw *hw) -{ - s32 ret_val; - u16 checksum = 0; - u16 i, nvm_data; - - for (i = 0; i < NVM_CHECKSUM_REG; i++) { - ret_val = e1000_read_nvm(hw, i, 1, &nvm_data); - if (ret_val) { - e_dbg("NVM Read Error while updating checksum.\n"); - return ret_val; - } - checksum += nvm_data; - } - checksum = (u16) NVM_SUM - checksum; - ret_val = e1000_write_nvm(hw, NVM_CHECKSUM_REG, 1, &checksum); - if (ret_val) - e_dbg("NVM Write Error while updating checksum.\n"); - - return ret_val; -} - -/** - * e1000e_reload_nvm - Reloads EEPROM - * @hw: pointer to the HW structure - * - * Reloads the EEPROM by setting the "Reinitialize from EEPROM" bit in the - * extended control register. - **/ -void e1000e_reload_nvm(struct e1000_hw *hw) -{ - u32 ctrl_ext; - - udelay(10); - ctrl_ext = er32(CTRL_EXT); - ctrl_ext |= E1000_CTRL_EXT_EE_RST; - ew32(CTRL_EXT, ctrl_ext); - e1e_flush(); -} - -/** - * e1000_calculate_checksum - Calculate checksum for buffer - * @buffer: pointer to EEPROM - * @length: size of EEPROM to calculate a checksum for - * - * Calculates the checksum for some buffer on a specified length. The - * checksum calculated is returned. - **/ -static u8 e1000_calculate_checksum(u8 *buffer, u32 length) -{ - u32 i; - u8 sum = 0; - - if (!buffer) - return 0; - - for (i = 0; i < length; i++) - sum += buffer[i]; - - return (u8) (0 - sum); -} - -/** - * e1000_mng_enable_host_if - Checks host interface is enabled - * @hw: pointer to the HW structure - * - * Returns E1000_success upon success, else E1000_ERR_HOST_INTERFACE_COMMAND - * - * This function checks whether the HOST IF is enabled for command operation - * and also checks whether the previous command is completed. It busy waits - * in case of previous command is not completed. - **/ -static s32 e1000_mng_enable_host_if(struct e1000_hw *hw) -{ - u32 hicr; - u8 i; - - if (!(hw->mac.arc_subsystem_valid)) { - e_dbg("ARC subsystem not valid.\n"); - return -E1000_ERR_HOST_INTERFACE_COMMAND; - } - - /* Check that the host interface is enabled. */ - hicr = er32(HICR); - if ((hicr & E1000_HICR_EN) == 0) { - e_dbg("E1000_HOST_EN bit disabled.\n"); - return -E1000_ERR_HOST_INTERFACE_COMMAND; - } - /* check the previous command is completed */ - for (i = 0; i < E1000_MNG_DHCP_COMMAND_TIMEOUT; i++) { - hicr = er32(HICR); - if (!(hicr & E1000_HICR_C)) - break; - mdelay(1); - } - - if (i == E1000_MNG_DHCP_COMMAND_TIMEOUT) { - e_dbg("Previous command timeout failed .\n"); - return -E1000_ERR_HOST_INTERFACE_COMMAND; - } - - return 0; -} - -/** - * e1000e_check_mng_mode_generic - check management mode - * @hw: pointer to the HW structure - * - * Reads the firmware semaphore register and returns true (>0) if - * manageability is enabled, else false (0). - **/ -bool e1000e_check_mng_mode_generic(struct e1000_hw *hw) -{ - u32 fwsm = er32(FWSM); - - return (fwsm & E1000_FWSM_MODE_MASK) == - (E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT); -} - -/** - * e1000e_enable_tx_pkt_filtering - Enable packet filtering on Tx - * @hw: pointer to the HW structure - * - * Enables packet filtering on transmit packets if manageability is enabled - * and host interface is enabled. - **/ -bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw) -{ - struct e1000_host_mng_dhcp_cookie *hdr = &hw->mng_cookie; - u32 *buffer = (u32 *)&hw->mng_cookie; - u32 offset; - s32 ret_val, hdr_csum, csum; - u8 i, len; - - hw->mac.tx_pkt_filtering = true; - - /* No manageability, no filtering */ - if (!e1000e_check_mng_mode(hw)) { - hw->mac.tx_pkt_filtering = false; - goto out; - } - - /* - * If we can't read from the host interface for whatever - * reason, disable filtering. - */ - ret_val = e1000_mng_enable_host_if(hw); - if (ret_val) { - hw->mac.tx_pkt_filtering = false; - goto out; - } - - /* Read in the header. Length and offset are in dwords. */ - len = E1000_MNG_DHCP_COOKIE_LENGTH >> 2; - offset = E1000_MNG_DHCP_COOKIE_OFFSET >> 2; - for (i = 0; i < len; i++) - *(buffer + i) = E1000_READ_REG_ARRAY(hw, E1000_HOST_IF, offset + i); - hdr_csum = hdr->checksum; - hdr->checksum = 0; - csum = e1000_calculate_checksum((u8 *)hdr, - E1000_MNG_DHCP_COOKIE_LENGTH); - /* - * If either the checksums or signature don't match, then - * the cookie area isn't considered valid, in which case we - * take the safe route of assuming Tx filtering is enabled. - */ - if ((hdr_csum != csum) || (hdr->signature != E1000_IAMT_SIGNATURE)) { - hw->mac.tx_pkt_filtering = true; - goto out; - } - - /* Cookie area is valid, make the final check for filtering. */ - if (!(hdr->status & E1000_MNG_DHCP_COOKIE_STATUS_PARSING)) { - hw->mac.tx_pkt_filtering = false; - goto out; - } - -out: - return hw->mac.tx_pkt_filtering; -} - -/** - * e1000_mng_write_cmd_header - Writes manageability command header - * @hw: pointer to the HW structure - * @hdr: pointer to the host interface command header - * - * Writes the command header after does the checksum calculation. - **/ -static s32 e1000_mng_write_cmd_header(struct e1000_hw *hw, - struct e1000_host_mng_command_header *hdr) -{ - u16 i, length = sizeof(struct e1000_host_mng_command_header); - - /* Write the whole command header structure with new checksum. */ - - hdr->checksum = e1000_calculate_checksum((u8 *)hdr, length); - - length >>= 2; - /* Write the relevant command block into the ram area. */ - for (i = 0; i < length; i++) { - E1000_WRITE_REG_ARRAY(hw, E1000_HOST_IF, i, - *((u32 *) hdr + i)); - e1e_flush(); - } - - return 0; -} - -/** - * e1000_mng_host_if_write - Write to the manageability host interface - * @hw: pointer to the HW structure - * @buffer: pointer to the host interface buffer - * @length: size of the buffer - * @offset: location in the buffer to write to - * @sum: sum of the data (not checksum) - * - * This function writes the buffer content at the offset given on the host if. - * It also does alignment considerations to do the writes in most efficient - * way. Also fills up the sum of the buffer in *buffer parameter. - **/ -static s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer, - u16 length, u16 offset, u8 *sum) -{ - u8 *tmp; - u8 *bufptr = buffer; - u32 data = 0; - u16 remaining, i, j, prev_bytes; - - /* sum = only sum of the data and it is not checksum */ - - if (length == 0 || offset + length > E1000_HI_MAX_MNG_DATA_LENGTH) - return -E1000_ERR_PARAM; - - tmp = (u8 *)&data; - prev_bytes = offset & 0x3; - offset >>= 2; - - if (prev_bytes) { - data = E1000_READ_REG_ARRAY(hw, E1000_HOST_IF, offset); - for (j = prev_bytes; j < sizeof(u32); j++) { - *(tmp + j) = *bufptr++; - *sum += *(tmp + j); - } - E1000_WRITE_REG_ARRAY(hw, E1000_HOST_IF, offset, data); - length -= j - prev_bytes; - offset++; - } - - remaining = length & 0x3; - length -= remaining; - - /* Calculate length in DWORDs */ - length >>= 2; - - /* - * The device driver writes the relevant command block into the - * ram area. - */ - for (i = 0; i < length; i++) { - for (j = 0; j < sizeof(u32); j++) { - *(tmp + j) = *bufptr++; - *sum += *(tmp + j); - } - - E1000_WRITE_REG_ARRAY(hw, E1000_HOST_IF, offset + i, data); - } - if (remaining) { - for (j = 0; j < sizeof(u32); j++) { - if (j < remaining) - *(tmp + j) = *bufptr++; - else - *(tmp + j) = 0; - - *sum += *(tmp + j); - } - E1000_WRITE_REG_ARRAY(hw, E1000_HOST_IF, offset + i, data); - } - - return 0; -} - -/** - * e1000e_mng_write_dhcp_info - Writes DHCP info to host interface - * @hw: pointer to the HW structure - * @buffer: pointer to the host interface - * @length: size of the buffer - * - * Writes the DHCP information to the host interface. - **/ -s32 e1000e_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length) -{ - struct e1000_host_mng_command_header hdr; - s32 ret_val; - u32 hicr; - - hdr.command_id = E1000_MNG_DHCP_TX_PAYLOAD_CMD; - hdr.command_length = length; - hdr.reserved1 = 0; - hdr.reserved2 = 0; - hdr.checksum = 0; - - /* Enable the host interface */ - ret_val = e1000_mng_enable_host_if(hw); - if (ret_val) - return ret_val; - - /* Populate the host interface with the contents of "buffer". */ - ret_val = e1000_mng_host_if_write(hw, buffer, length, - sizeof(hdr), &(hdr.checksum)); - if (ret_val) - return ret_val; - - /* Write the manageability command header */ - ret_val = e1000_mng_write_cmd_header(hw, &hdr); - if (ret_val) - return ret_val; - - /* Tell the ARC a new command is pending. */ - hicr = er32(HICR); - ew32(HICR, hicr | E1000_HICR_C); - - return 0; -} - -/** - * e1000e_enable_mng_pass_thru - Check if management passthrough is needed - * @hw: pointer to the HW structure - * - * Verifies the hardware needs to leave interface enabled so that frames can - * be directed to and from the management interface. - **/ -bool e1000e_enable_mng_pass_thru(struct e1000_hw *hw) -{ - u32 manc; - u32 fwsm, factps; - bool ret_val = false; - - manc = er32(MANC); - - if (!(manc & E1000_MANC_RCV_TCO_EN)) - goto out; - - if (hw->mac.has_fwsm) { - fwsm = er32(FWSM); - factps = er32(FACTPS); - - if (!(factps & E1000_FACTPS_MNGCG) && - ((fwsm & E1000_FWSM_MODE_MASK) == - (e1000_mng_mode_pt << E1000_FWSM_MODE_SHIFT))) { - ret_val = true; - goto out; - } - } else if ((hw->mac.type == e1000_82574) || - (hw->mac.type == e1000_82583)) { - u16 data; - - factps = er32(FACTPS); - e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &data); - - if (!(factps & E1000_FACTPS_MNGCG) && - ((data & E1000_NVM_INIT_CTRL2_MNGM) == - (e1000_mng_mode_pt << 13))) { - ret_val = true; - goto out; - } - } else if ((manc & E1000_MANC_SMBUS_EN) && - !(manc & E1000_MANC_ASF_EN)) { - ret_val = true; - goto out; - } - -out: - return ret_val; -} |