Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1429 commits)
  net: Allow dependancies of FDDI & Tokenring to be modular.
  igb: Fix build warning when DCA is disabled.
  net: Fix warning fallout from recent NAPI interface changes.
  gro: Fix potential use after free
  sfc: If AN is enabled, always read speed/duplex from the AN advertising bits
  sfc: When disabling the NIC, close the device rather than unregistering it
  sfc: SFT9001: Add cable diagnostics
  sfc: Add support for multiple PHY self-tests
  sfc: Merge top-level functions for self-tests
  sfc: Clean up PHY mode management in loopback self-test
  sfc: Fix unreliable link detection in some loopback modes
  sfc: Generate unique names for per-NIC workqueues
  802.3ad: use standard ethhdr instead of ad_header
  802.3ad: generalize out mac address initializer
  802.3ad: initialize ports LACPDU from const initializer
  802.3ad: remove typedef around ad_system
  802.3ad: turn ports is_individual into a bool
  802.3ad: turn ports is_enabled into a bool
  802.3ad: make ntt bool
  ixgbe: Fix set_ringparam in ixgbe to use the same memory pools.
  ...

Fixed trivial IPv4/6 address printing conflicts in fs/cifs/connect.c due
to the conversion to %pI (in this networking merge) and the addition of
doing IPv6 addresses (from the earlier merge of CIFS).

1 files changed, 15 insertions, 4 deletions

diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
index b2c910c..cf43ee74 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/e1000e/82571.c
@@ -28,6 +28,7 @@
 
 /*
  * 82571EB Gigabit Ethernet Controller
+ * 82571EB Gigabit Ethernet Controller (Copper)
  * 82571EB Gigabit Ethernet Controller (Fiber)
  * 82571EB Dual Port Gigabit Mezzanine Adapter
  * 82571EB Quad Port Gigabit Mezzanine Adapter
@@ -331,8 +332,9 @@ static s32 e1000_get_variants_82571(struct e1000_adapter *adapter)
 
 	case e1000_82573:
 		if (pdev->device == E1000_DEV_ID_82573L) {
-			e1000_read_nvm(&adapter->hw, NVM_INIT_3GIO_3, 1,
-				       &eeprom_data);
+			if (e1000_read_nvm(&adapter->hw, NVM_INIT_3GIO_3, 1,
+				       &eeprom_data) < 0)
+				break;
 			if (eeprom_data & NVM_WORD1A_ASPM_MASK)
 				adapter->flags &= ~FLAG_HAS_JUMBO_FRAMES;
 		}
@@ -973,6 +975,12 @@ static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw)
 		ew32(CTRL_EXT, reg);
 	}
 
+	if (hw->mac.type == e1000_82571) {
+		reg = er32(PBA_ECC);
+		reg |= E1000_PBA_ECC_CORR_EN;
+		ew32(PBA_ECC, reg);
+	}
+
 	/* PCI-Ex Control Register */
 	if (hw->mac.type == e1000_82574) {
 		reg = er32(GCR);
@@ -1111,8 +1119,8 @@ static s32 e1000_setup_link_82571(struct e1000_hw *hw)
 	 * set it to full.
 	 */
 	if ((hw->mac.type == e1000_82573 || hw->mac.type == e1000_82574) &&
-	    hw->fc.type == e1000_fc_default)
-		hw->fc.type = e1000_fc_full;
+	    hw->fc.requested_mode == e1000_fc_default)
+		hw->fc.requested_mode = e1000_fc_full;
 
 	return e1000e_setup_link(hw);
 }
@@ -1387,6 +1395,7 @@ static struct e1000_phy_operations e82_phy_ops_igp = {
 	.set_d0_lplu_state	= e1000_set_d0_lplu_state_82571,
 	.set_d3_lplu_state	= e1000e_set_d3_lplu_state,
 	.write_phy_reg		= e1000e_write_phy_reg_igp,
+	.cfg_on_link_up      	= NULL,
 };
 
 static struct e1000_phy_operations e82_phy_ops_m88 = {
@@ -1403,6 +1412,7 @@ static struct e1000_phy_operations e82_phy_ops_m88 = {
 	.set_d0_lplu_state	= e1000_set_d0_lplu_state_82571,
 	.set_d3_lplu_state	= e1000e_set_d3_lplu_state,
 	.write_phy_reg		= e1000e_write_phy_reg_m88,
+	.cfg_on_link_up      	= NULL,
 };
 
 static struct e1000_phy_operations e82_phy_ops_bm = {
@@ -1419,6 +1429,7 @@ static struct e1000_phy_operations e82_phy_ops_bm = {
 	.set_d0_lplu_state	= e1000_set_d0_lplu_state_82571,
 	.set_d3_lplu_state	= e1000e_set_d3_lplu_state,
 	.write_phy_reg		= e1000e_write_phy_reg_bm2,
+	.cfg_on_link_up      	= NULL,
 };
 
 static struct e1000_nvm_operations e82571_nvm_ops = {