Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

Conflicts:

	drivers/infiniband/core/iwcm.c
	drivers/net/chelsio/cxgb2.c
	drivers/net/wireless/bcm43xx/bcm43xx_main.c
	drivers/net/wireless/prism54/islpci_eth.c
	drivers/usb/core/hub.h
	drivers/usb/input/hid-core.c
	net/core/netpoll.c

Fix up merge failures with Linus's head and fix new compilation failures.

Signed-Off-By: David Howells <dhowells@redhat.com>

7 files changed, 583 insertions, 296 deletions

diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h
index 7ecce43..f091042 100644
--- a/drivers/net/e1000/e1000.h
+++ b/drivers/net/e1000/e1000.h
@@ -59,6 +59,9 @@
 #include <linux/capability.h>
 #include <linux/in.h>
 #include <linux/ip.h>
+#ifdef NETIF_F_TSO6
+#include <linux/ipv6.h>
+#endif
 #include <linux/tcp.h>
 #include <linux/udp.h>
 #include <net/pkt_sched.h>
@@ -254,6 +257,17 @@ struct e1000_adapter {
 	spinlock_t tx_queue_lock;
 #endif
 	atomic_t irq_sem;
+	unsigned int detect_link;
+	unsigned int total_tx_bytes;
+	unsigned int total_tx_packets;
+	unsigned int total_rx_bytes;
+	unsigned int total_rx_packets;
+	/* Interrupt Throttle Rate */
+	uint32_t itr;
+	uint32_t itr_setting;
+	uint16_t tx_itr;
+	uint16_t rx_itr;
+
 	struct work_struct reset_task;
 	uint8_t fc_autoneg;
 
@@ -262,6 +276,7 @@ struct e1000_adapter {
 
 	/* TX */
 	struct e1000_tx_ring *tx_ring;      /* One per active queue */
+	unsigned int restart_queue;
 	unsigned long tx_queue_len;
 	uint32_t txd_cmd;
 	uint32_t tx_int_delay;
@@ -310,8 +325,6 @@ struct e1000_adapter {
 	uint64_t gorcl_old;
 	uint16_t rx_ps_bsize0;
 
-	/* Interrupt Throttle Rate */
-	uint32_t itr;
 
 	/* OS defined structs */
 	struct net_device *netdev;
diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c
index c564adb..da459f7 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c
@@ -85,6 +85,7 @@ static const struct e1000_stats e1000_gstrings_stats[] = {
 	{ "tx_single_coll_ok", E1000_STAT(stats.scc) },
 	{ "tx_multi_coll_ok", E1000_STAT(stats.mcc) },
 	{ "tx_timeout_count", E1000_STAT(tx_timeout_count) },
+	{ "tx_restart_queue", E1000_STAT(restart_queue) },
 	{ "rx_long_length_errors", E1000_STAT(stats.roc) },
 	{ "rx_short_length_errors", E1000_STAT(stats.ruc) },
 	{ "rx_align_errors", E1000_STAT(stats.algnerrc) },
@@ -133,9 +134,7 @@ e1000_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
 
 		if (hw->autoneg == 1) {
 			ecmd->advertising |= ADVERTISED_Autoneg;
-
 			/* the e1000 autoneg seems to match ethtool nicely */
-
 			ecmd->advertising |= hw->autoneg_advertised;
 		}
 
@@ -285,7 +284,7 @@ e1000_set_pauseparam(struct net_device *netdev,
 			e1000_reset(adapter);
 	} else
 		retval = ((hw->media_type == e1000_media_type_fiber) ?
-			   e1000_setup_link(hw) : e1000_force_mac_fc(hw));
+			  e1000_setup_link(hw) : e1000_force_mac_fc(hw));
 
 	clear_bit(__E1000_RESETTING, &adapter->flags);
 	return retval;
@@ -350,6 +349,13 @@ e1000_set_tso(struct net_device *netdev, uint32_t data)
 	else
 		netdev->features &= ~NETIF_F_TSO;
 
+#ifdef NETIF_F_TSO6
+	if (data)
+		netdev->features |= NETIF_F_TSO6;
+	else
+		netdev->features &= ~NETIF_F_TSO6;
+#endif
+
 	DPRINTK(PROBE, INFO, "TSO is %s\n", data ? "Enabled" : "Disabled");
 	adapter->tso_force = TRUE;
 	return 0;
@@ -774,7 +780,7 @@ e1000_reg_test(struct e1000_adapter *adapter, uint64_t *data)
 	/* The status register is Read Only, so a write should fail.
 	 * Some bits that get toggled are ignored.
 	 */
-        switch (adapter->hw.mac_type) {
+	switch (adapter->hw.mac_type) {
 	/* there are several bits on newer hardware that are r/w */
 	case e1000_82571:
 	case e1000_82572:
@@ -802,12 +808,14 @@ e1000_reg_test(struct e1000_adapter *adapter, uint64_t *data)
 	}
 	/* restore previous status */
 	E1000_WRITE_REG(&adapter->hw, STATUS, before);
+
 	if (adapter->hw.mac_type != e1000_ich8lan) {
 		REG_PATTERN_TEST(FCAL, 0xFFFFFFFF, 0xFFFFFFFF);
 		REG_PATTERN_TEST(FCAH, 0x0000FFFF, 0xFFFFFFFF);
 		REG_PATTERN_TEST(FCT, 0x0000FFFF, 0xFFFFFFFF);
 		REG_PATTERN_TEST(VET, 0x0000FFFF, 0xFFFFFFFF);
 	}
+
 	REG_PATTERN_TEST(RDTR, 0x0000FFFF, 0xFFFFFFFF);
 	REG_PATTERN_TEST(RDBAH, 0xFFFFFFFF, 0xFFFFFFFF);
 	REG_PATTERN_TEST(RDLEN, 0x000FFF80, 0x000FFFFF);
@@ -820,8 +828,9 @@ e1000_reg_test(struct e1000_adapter *adapter, uint64_t *data)
 	REG_PATTERN_TEST(TDLEN, 0x000FFF80, 0x000FFFFF);
 
 	REG_SET_AND_CHECK(RCTL, 0xFFFFFFFF, 0x00000000);
+
 	before = (adapter->hw.mac_type == e1000_ich8lan ?
-			0x06C3B33E : 0x06DFB3FE);
+	          0x06C3B33E : 0x06DFB3FE);
 	REG_SET_AND_CHECK(RCTL, before, 0x003FFFFB);
 	REG_SET_AND_CHECK(TCTL, 0xFFFFFFFF, 0x00000000);
 
@@ -834,10 +843,10 @@ e1000_reg_test(struct e1000_adapter *adapter, uint64_t *data)
 		REG_PATTERN_TEST(TDBAL, 0xFFFFFFF0, 0xFFFFFFFF);
 		REG_PATTERN_TEST(TIDV, 0x0000FFFF, 0x0000FFFF);
 		value = (adapter->hw.mac_type == e1000_ich8lan ?
-				E1000_RAR_ENTRIES_ICH8LAN : E1000_RAR_ENTRIES);
+		         E1000_RAR_ENTRIES_ICH8LAN : E1000_RAR_ENTRIES);
 		for (i = 0; i < value; i++) {
 			REG_PATTERN_TEST(RA + (((i << 1) + 1) << 2), 0x8003FFFF,
-					 0xFFFFFFFF);
+			                 0xFFFFFFFF);
 		}
 
 	} else {
@@ -883,8 +892,7 @@ e1000_eeprom_test(struct e1000_adapter *adapter, uint64_t *data)
 }
 
 static irqreturn_t
-e1000_test_intr(int irq,
-		void *data)
+e1000_test_intr(int irq, void *data)
 {
 	struct net_device *netdev = (struct net_device *) data;
 	struct e1000_adapter *adapter = netdev_priv(netdev);
@@ -905,11 +913,11 @@ e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data)
 
 	/* NOTE: we don't test MSI interrupts here, yet */
 	/* Hook up test interrupt handler just for this test */
-	if (!request_irq(irq, &e1000_test_intr, IRQF_PROBE_SHARED,
-			 netdev->name, netdev))
+	if (!request_irq(irq, &e1000_test_intr, IRQF_PROBE_SHARED, netdev->name,
+	                 netdev))
 		shared_int = FALSE;
 	else if (request_irq(irq, &e1000_test_intr, IRQF_SHARED,
-			      netdev->name, netdev)) {
+	         netdev->name, netdev)) {
 		*data = 1;
 		return -1;
 	}
@@ -925,6 +933,7 @@ e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data)
 
 		if (adapter->hw.mac_type == e1000_ich8lan && i == 8)
 			continue;
+
 		/* Interrupt to test */
 		mask = 1 << i;
 
@@ -1674,7 +1683,7 @@ e1000_diag_test(struct net_device *netdev,
 		if (e1000_link_test(adapter, &data[4]))
 			eth_test->flags |= ETH_TEST_FL_FAILED;
 
-		/* Offline tests aren't run; pass by default */
+		/* Online tests aren't run; pass by default */
 		data[0] = 0;
 		data[1] = 0;
 		data[2] = 0;
@@ -1717,6 +1726,7 @@ static int e1000_wol_exclusion(struct e1000_adapter *adapter, struct ethtool_wol
 		retval = 0;
 		break;
 	case E1000_DEV_ID_82571EB_QUAD_COPPER:
+	case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE:
 	case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
 		/* quad port adapters only support WoL on port A */
 		if (!adapter->quad_port_a) {
diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c
index 65077f3..3655d90 100644
--- a/drivers/net/e1000/e1000_hw.c
+++ b/drivers/net/e1000/e1000_hw.c
@@ -385,6 +385,7 @@ e1000_set_mac_type(struct e1000_hw *hw)
     case E1000_DEV_ID_82571EB_FIBER:
     case E1000_DEV_ID_82571EB_SERDES:
     case E1000_DEV_ID_82571EB_QUAD_COPPER:
+    case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE:
             hw->mac_type = e1000_82571;
         break;
     case E1000_DEV_ID_82572EI_COPPER:
@@ -408,6 +409,8 @@ e1000_set_mac_type(struct e1000_hw *hw)
     case E1000_DEV_ID_ICH8_IGP_AMT:
     case E1000_DEV_ID_ICH8_IGP_C:
     case E1000_DEV_ID_ICH8_IFE:
+    case E1000_DEV_ID_ICH8_IFE_GT:
+    case E1000_DEV_ID_ICH8_IFE_G:
     case E1000_DEV_ID_ICH8_IGP_M:
         hw->mac_type = e1000_ich8lan;
         break;
@@ -2367,6 +2370,7 @@ e1000_phy_force_speed_duplex(struct e1000_hw *hw)
 
         /* Need to reset the PHY or these changes will be ignored */
         mii_ctrl_reg |= MII_CR_RESET;
+
     /* Disable MDI-X support for 10/100 */
     } else if (hw->phy_type == e1000_phy_ife) {
         ret_val = e1000_read_phy_reg(hw, IFE_PHY_MDIX_CONTROL, &phy_data);
@@ -2379,6 +2383,7 @@ e1000_phy_force_speed_duplex(struct e1000_hw *hw)
         ret_val = e1000_write_phy_reg(hw, IFE_PHY_MDIX_CONTROL, phy_data);
         if (ret_val)
             return ret_val;
+
     } else {
         /* Clear Auto-Crossover to force MDI manually.  IGP requires MDI
          * forced whenever speed or duplex are forced.
@@ -3868,7 +3873,7 @@ e1000_phy_hw_reset(struct e1000_hw *hw)
 *
 * hw - Struct containing variables accessed by shared code
 *
-* Sets bit 15 of the MII Control regiser
+* Sets bit 15 of the MII Control register
 ******************************************************************************/
 int32_t
 e1000_phy_reset(struct e1000_hw *hw)
@@ -3940,14 +3945,15 @@ e1000_phy_powerdown_workaround(struct e1000_hw *hw)
         E1000_WRITE_REG(hw, PHY_CTRL, reg | E1000_PHY_CTRL_GBE_DISABLE |
                         E1000_PHY_CTRL_NOND0A_GBE_DISABLE);
 
-        /* Write VR power-down enable */
+        /* Write VR power-down enable - bits 9:8 should be 10b */
         e1000_read_phy_reg(hw, IGP3_VR_CTRL, &phy_data);
-        e1000_write_phy_reg(hw, IGP3_VR_CTRL, phy_data |
-                            IGP3_VR_CTRL_MODE_SHUT);
+        phy_data |= (1 << 9);
+        phy_data &= ~(1 << 8);
+        e1000_write_phy_reg(hw, IGP3_VR_CTRL, phy_data);
 
         /* Read it back and test */
         e1000_read_phy_reg(hw, IGP3_VR_CTRL, &phy_data);
-        if ((phy_data & IGP3_VR_CTRL_MODE_SHUT) || retry)
+        if (((phy_data & IGP3_VR_CTRL_MODE_MASK) == IGP3_VR_CTRL_MODE_SHUT) || retry)
             break;
 
         /* Issue PHY reset and repeat at most one more time */
@@ -4549,7 +4555,7 @@ e1000_init_eeprom_params(struct e1000_hw *hw)
     case e1000_ich8lan:
         {
         int32_t  i = 0;
-        uint32_t flash_size = E1000_READ_ICH8_REG(hw, ICH8_FLASH_GFPREG);
+        uint32_t flash_size = E1000_READ_ICH_FLASH_REG(hw, ICH_FLASH_GFPREG);
 
         eeprom->type = e1000_eeprom_ich8;
         eeprom->use_eerd = FALSE;
@@ -4565,12 +4571,14 @@ e1000_init_eeprom_params(struct e1000_hw *hw)
             }
         }
 
-        hw->flash_base_addr = (flash_size & ICH8_GFPREG_BASE_MASK) *
-                              ICH8_FLASH_SECTOR_SIZE;
+        hw->flash_base_addr = (flash_size & ICH_GFPREG_BASE_MASK) *
+                              ICH_FLASH_SECTOR_SIZE;
+
+        hw->flash_bank_size = ((flash_size >> 16) & ICH_GFPREG_BASE_MASK) + 1;
+        hw->flash_bank_size -= (flash_size & ICH_GFPREG_BASE_MASK);
+
+        hw->flash_bank_size *= ICH_FLASH_SECTOR_SIZE;
 
-        hw->flash_bank_size = ((flash_size >> 16) & ICH8_GFPREG_BASE_MASK) + 1;
-        hw->flash_bank_size -= (flash_size & ICH8_GFPREG_BASE_MASK);
-        hw->flash_bank_size *= ICH8_FLASH_SECTOR_SIZE;
         hw->flash_bank_size /= 2 * sizeof(uint16_t);
 
         break;
@@ -5620,8 +5628,8 @@ e1000_commit_shadow_ram(struct e1000_hw *hw)
                  * signature is valid.  We want to do this after the write
                  * has completed so that we don't mark the segment valid
                  * while the write is still in progress */
-                if (i == E1000_ICH8_NVM_SIG_WORD)
-                    high_byte = E1000_ICH8_NVM_SIG_MASK | high_byte;
+                if (i == E1000_ICH_NVM_SIG_WORD)
+                    high_byte = E1000_ICH_NVM_SIG_MASK | high_byte;
 
                 error = e1000_verify_write_ich8_byte(hw,
                             (i << 1) + new_bank_offset + 1, high_byte);
@@ -5643,18 +5651,18 @@ e1000_commit_shadow_ram(struct e1000_hw *hw)
              * erase as well since these bits are 11 to start with
              * and we need to change bit 14 to 0b */
             e1000_read_ich8_byte(hw,
-                                 E1000_ICH8_NVM_SIG_WORD * 2 + 1 + new_bank_offset,
+                                 E1000_ICH_NVM_SIG_WORD * 2 + 1 + new_bank_offset,
                                  &high_byte);
             high_byte &= 0xBF;
             error = e1000_verify_write_ich8_byte(hw,
-                        E1000_ICH8_NVM_SIG_WORD * 2 + 1 + new_bank_offset, high_byte);
+                        E1000_ICH_NVM_SIG_WORD * 2 + 1 + new_bank_offset, high_byte);
             /* And invalidate the previously valid segment by setting
              * its signature word (0x13) high_byte to 0b. This can be
              * done without an erase because flash erase sets all bits
              * to 1's. We can write 1's to 0's without an erase */
             if (error == E1000_SUCCESS) {
                 error = e1000_verify_write_ich8_byte(hw,
-                            E1000_ICH8_NVM_SIG_WORD * 2 + 1 + old_bank_offset, 0);
+                            E1000_ICH_NVM_SIG_WORD * 2 + 1 + old_bank_offset, 0);
             }
 
             /* Clear the now not used entry in the cache */
@@ -5841,6 +5849,7 @@ e1000_mta_set(struct e1000_hw *hw,
     hash_reg = (hash_value >> 5) & 0x7F;
     if (hw->mac_type == e1000_ich8lan)
         hash_reg &= 0x1F;
+
     hash_bit = hash_value & 0x1F;
 
     mta = E1000_READ_REG_ARRAY(hw, MTA, hash_reg);
@@ -6026,6 +6035,7 @@ e1000_id_led_init(struct e1000_hw * hw)
         else
             eeprom_data = ID_LED_DEFAULT;
     }
+
     for (i = 0; i < 4; i++) {
         temp = (eeprom_data >> (i << 2)) & led_mask;
         switch (temp) {
@@ -8486,7 +8496,7 @@ e1000_ich8_cycle_init(struct e1000_hw *hw)
 
     DEBUGFUNC("e1000_ich8_cycle_init");
 
-    hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS);
+    hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS);
 
     /* May be check the Flash Des Valid bit in Hw status */
     if (hsfsts.hsf_status.fldesvalid == 0) {
@@ -8499,7 +8509,7 @@ e1000_ich8_cycle_init(struct e1000_hw *hw)
     hsfsts.hsf_status.flcerr = 1;
     hsfsts.hsf_status.dael = 1;
 
-    E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFSTS, hsfsts.regval);
+    E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS, hsfsts.regval);
 
     /* Either we should have a hardware SPI cycle in progress bit to check
      * against, in order to start a new cycle or FDONE bit should be changed
@@ -8514,13 +8524,13 @@ e1000_ich8_cycle_init(struct e1000_hw *hw)
         /* There is no cycle running at present, so we can start a cycle */
         /* Begin by setting Flash Cycle Done. */
         hsfsts.hsf_status.flcdone = 1;
-        E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFSTS, hsfsts.regval);
+        E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS, hsfsts.regval);
         error = E1000_SUCCESS;
     } else {
         /* otherwise poll for sometime so the current cycle has a chance
          * to end before giving up. */
-        for (i = 0; i < ICH8_FLASH_COMMAND_TIMEOUT; i++) {
-            hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS);
+        for (i = 0; i < ICH_FLASH_COMMAND_TIMEOUT; i++) {
+            hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS);
             if (hsfsts.hsf_status.flcinprog == 0) {
                 error = E1000_SUCCESS;
                 break;
@@ -8531,7 +8541,7 @@ e1000_ich8_cycle_init(struct e1000_hw *hw)
             /* Successful in waiting for previous cycle to timeout,
              * now set the Flash Cycle Done. */
             hsfsts.hsf_status.flcdone = 1;
-            E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFSTS, hsfsts.regval);
+            E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS, hsfsts.regval);
         } else {
             DEBUGOUT("Flash controller busy, cannot get access");
         }
@@ -8553,13 +8563,13 @@ e1000_ich8_flash_cycle(struct e1000_hw *hw, uint32_t timeout)
     uint32_t i = 0;
 
     /* Start a cycle by writing 1 in Flash Cycle Go in Hw Flash Control */
-    hsflctl.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFCTL);
+    hsflctl.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL);
     hsflctl.hsf_ctrl.flcgo = 1;
-    E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFCTL, hsflctl.regval);
+    E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL, hsflctl.regval);
 
     /* wait till FDONE bit is set to 1 */
     do {
-        hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS);
+        hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS);
         if (hsfsts.hsf_status.flcdone == 1)
             break;
         udelay(1);
@@ -8593,10 +8603,10 @@ e1000_read_ich8_data(struct e1000_hw *hw, uint32_t index,
     DEBUGFUNC("e1000_read_ich8_data");
 
     if (size < 1  || size > 2 || data == 0x0 ||
-        index > ICH8_FLASH_LINEAR_ADDR_MASK)
+        index > ICH_FLASH_LINEAR_ADDR_MASK)
         return error;
 
-    flash_linear_address = (ICH8_FLASH_LINEAR_ADDR_MASK & index) +
+    flash_linear_address = (ICH_FLASH_LINEAR_ADDR_MASK & index) +
                            hw->flash_base_addr;
 
     do {
@@ -8606,25 +8616,25 @@ e1000_read_ich8_data(struct e1000_hw *hw, uint32_t index,
         if (error != E1000_SUCCESS)
             break;
 
-        hsflctl.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFCTL);
+        hsflctl.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL);
         /* 0b/1b corresponds to 1 or 2 byte size, respectively. */
         hsflctl.hsf_ctrl.fldbcount = size - 1;
-        hsflctl.hsf_ctrl.flcycle = ICH8_CYCLE_READ;
-        E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFCTL, hsflctl.regval);
+        hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_READ;
+        E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL, hsflctl.regval);
 
         /* Write the last 24 bits of index into Flash Linear address field in
          * Flash Address */
         /* TODO: TBD maybe check the index against the size of flash */
 
-        E1000_WRITE_ICH8_REG(hw, ICH8_FLASH_FADDR, flash_linear_address);
+        E1000_WRITE_ICH_FLASH_REG(hw, ICH_FLASH_FADDR, flash_linear_address);
 
-        error = e1000_ich8_flash_cycle(hw, ICH8_FLASH_COMMAND_TIMEOUT);
+        error = e1000_ich8_flash_cycle(hw, ICH_FLASH_COMMAND_TIMEOUT);
 
         /* Check if FCERR is set to 1, if set to 1, clear it and try the whole
          * sequence a few more times, else read in (shift in) the Flash Data0,
          * the order is least significant byte first msb to lsb */
         if (error == E1000_SUCCESS) {
-            flash_data = E1000_READ_ICH8_REG(hw, ICH8_FLASH_FDATA0);
+            flash_data = E1000_READ_ICH_FLASH_REG(hw, ICH_FLASH_FDATA0);
             if (size == 1) {
                 *data = (uint8_t)(flash_data & 0x000000FF);
             } else if (size == 2) {
@@ -8634,9 +8644,9 @@ e1000_read_ich8_data(struct e1000_hw *hw, uint32_t index,
         } else {
             /* If we've gotten here, then things are probably completely hosed,
              * but if the error condition is detected, it won't hurt to give
-             * it another try...ICH8_FLASH_CYCLE_REPEAT_COUNT times.
+             * it another try...ICH_FLASH_CYCLE_REPEAT_COUNT times.
              */
-            hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS);
+            hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS);
             if (hsfsts.hsf_status.flcerr == 1) {
                 /* Repeat for some time before giving up. */
                 continue;
@@ -8645,7 +8655,7 @@ e1000_read_ich8_data(struct e1000_hw *hw, uint32_t index,
                 break;
             }
         }
-    } while (count++ < ICH8_FLASH_CYCLE_REPEAT_COUNT);
+    } while (count++ < ICH_FLASH_CYCLE_REPEAT_COUNT);
 
     return error;
 }
@@ -8672,10 +8682,10 @@ e1000_write_ich8_data(struct e1000_hw *hw, uint32_t index, uint32_t size,
     DEBUGFUNC("e1000_write_ich8_data");
 
     if (size < 1  || size > 2 || data > size * 0xff ||
-        index > ICH8_FLASH_LINEAR_ADDR_MASK)
+        index > ICH_FLASH_LINEAR_ADDR_MASK)
         return error;
 
-    flash_linear_address = (ICH8_FLASH_LINEAR_ADDR_MASK & index) +
+    flash_linear_address = (ICH_FLASH_LINEAR_ADDR_MASK & index) +
                            hw->flash_base_addr;
 
     do {
@@ -8685,34 +8695,34 @@ e1000_write_ich8_data(struct e1000_hw *hw, uint32_t index, uint32_t size,
         if (error != E1000_SUCCESS)
             break;
 
-        hsflctl.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFCTL);
+        hsflctl.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL);
         /* 0b/1b corresponds to 1 or 2 byte size, respectively. */
         hsflctl.hsf_ctrl.fldbcount = size -1;
-        hsflctl.hsf_ctrl.flcycle = ICH8_CYCLE_WRITE;
-        E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFCTL, hsflctl.regval);
+        hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_WRITE;
+        E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL, hsflctl.regval);
 
         /* Write the last 24 bits of index into Flash Linear address field in
          * Flash Address */
-        E1000_WRITE_ICH8_REG(hw, ICH8_FLASH_FADDR, flash_linear_address);
+        E1000_WRITE_ICH_FLASH_REG(hw, ICH_FLASH_FADDR, flash_linear_address);
 
         if (size == 1)
             flash_data = (uint32_t)data & 0x00FF;
         else
             flash_data = (uint32_t)data;
 
-        E1000_WRITE_ICH8_REG(hw, ICH8_FLASH_FDATA0, flash_data);
+        E1000_WRITE_ICH_FLASH_REG(hw, ICH_FLASH_FDATA0, flash_data);
 
         /* check if FCERR is set to 1 , if set to 1, clear it and try the whole
          * sequence a few more times else done */
-        error = e1000_ich8_flash_cycle(hw, ICH8_FLASH_COMMAND_TIMEOUT);
+        error = e1000_ich8_flash_cycle(hw, ICH_FLASH_COMMAND_TIMEOUT);
         if (error == E1000_SUCCESS) {
             break;
         } else {
             /* If we're here, then things are most likely completely hosed,
              * but if the error condition is detected, it won't hurt to give
-             * it another try...ICH8_FLASH_CYCLE_REPEAT_COUNT times.
+             * it another try...ICH_FLASH_CYCLE_REPEAT_COUNT times.
              */
-            hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS);
+            hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS);
             if (hsfsts.hsf_status.flcerr == 1) {
                 /* Repeat for some time before giving up. */
                 continue;
@@ -8721,7 +8731,7 @@ e1000_write_ich8_data(struct e1000_hw *hw, uint32_t index, uint32_t size,
                 break;
             }
         }
-    } while (count++ < ICH8_FLASH_CYCLE_REPEAT_COUNT);
+    } while (count++ < ICH_FLASH_CYCLE_REPEAT_COUNT);
 
     return error;
 }
@@ -8840,7 +8850,7 @@ e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t bank)
     int32_t  j = 0;
     int32_t  error_flag = 0;
 
-    hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS);
+    hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS);
 
     /* Determine HW Sector size: Read BERASE bits of Hw flash Status register */
     /* 00: The Hw sector is 256 bytes, hence we need to erase 16
@@ -8853,19 +8863,14 @@ e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t bank)
      * 11: The Hw sector size is 64K bytes */
     if (hsfsts.hsf_status.berasesz == 0x0) {
         /* Hw sector size 256 */
-        sub_sector_size = ICH8_FLASH_SEG_SIZE_256;
-        bank_size = ICH8_FLASH_SECTOR_SIZE;
-        iteration = ICH8_FLASH_SECTOR_SIZE / ICH8_FLASH_SEG_SIZE_256;
+        sub_sector_size = ICH_FLASH_SEG_SIZE_256;
+        bank_size = ICH_FLASH_SECTOR_SIZE;
+        iteration = ICH_FLASH_SECTOR_SIZE / ICH_FLASH_SEG_SIZE_256;
     } else if (hsfsts.hsf_status.berasesz == 0x1) {
-        bank_size = ICH8_FLASH_SEG_SIZE_4K;
-        iteration = 1;
-    } else if (hw->mac_type != e1000_ich8lan &&
-               hsfsts.hsf_status.berasesz == 0x2) {
-        /* 8K erase size invalid for ICH8 - added in for ICH9 */
-        bank_size = ICH9_FLASH_SEG_SIZE_8K;
+        bank_size = ICH_FLASH_SEG_SIZE_4K;
         iteration = 1;
     } else if (hsfsts.hsf_status.berasesz == 0x3) {
-        bank_size = ICH8_FLASH_SEG_SIZE_64K;
+        bank_size = ICH_FLASH_SEG_SIZE_64K;
         iteration = 1;
     } else {
         return error;
@@ -8883,9 +8888,9 @@ e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t bank)
 
             /* Write a value 11 (block Erase) in Flash Cycle field in Hw flash
              * Control */
-            hsflctl.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFCTL);
-            hsflctl.hsf_ctrl.flcycle = ICH8_CYCLE_ERASE;
-            E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFCTL, hsflctl.regval);
+            hsflctl.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL);
+            hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_ERASE;
+            E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL, hsflctl.regval);
 
             /* Write the last 24 bits of an index within the block into Flash
              * Linear address field in Flash Address.  This probably needs to
@@ -8893,17 +8898,17 @@ e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t bank)
              * the software bank size (4, 8 or 64 KBytes) */
             flash_linear_address = bank * bank_size + j * sub_sector_size;
             flash_linear_address += hw->flash_base_addr;
-            flash_linear_address &= ICH8_FLASH_LINEAR_ADDR_MASK;
+            flash_linear_address &= ICH_FLASH_LINEAR_ADDR_MASK;
 
-            E1000_WRITE_ICH8_REG(hw, ICH8_FLASH_FADDR, flash_linear_address);
+            E1000_WRITE_ICH_FLASH_REG(hw, ICH_FLASH_FADDR, flash_linear_address);
 
-            error = e1000_ich8_flash_cycle(hw, ICH8_FLASH_ERASE_TIMEOUT);
+            error = e1000_ich8_flash_cycle(hw, ICH_FLASH_ERASE_TIMEOUT);
             /* Check if FCERR is set to 1.  If 1, clear it and try the whole
              * sequence a few more times else Done */
             if (error == E1000_SUCCESS) {
                 break;
             } else {
-                hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS);
+                hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS);
                 if (hsfsts.hsf_status.flcerr == 1) {
                     /* repeat for some time before giving up */
                     continue;
@@ -8912,7 +8917,7 @@ e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t bank)
                     break;
                 }
             }
-        } while ((count < ICH8_FLASH_CYCLE_REPEAT_COUNT) && !error_flag);
+        } while ((count < ICH_FLASH_CYCLE_REPEAT_COUNT) && !error_flag);
         if (error_flag == 1)
             break;
     }
@@ -9013,5 +9018,3 @@ e1000_init_lcd_from_nvm(struct e1000_hw *hw)
     return E1000_SUCCESS;
 }
 
-
-
diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h
index 449a603..3321fb1 100644
--- a/drivers/net/e1000/e1000_hw.h
+++ b/drivers/net/e1000/e1000_hw.h
@@ -128,11 +128,13 @@ typedef enum {
 /* PCI bus widths */
 typedef enum {
     e1000_bus_width_unknown = 0,
+    /* These PCIe values should literally match the possible return values
+     * from config space */
+    e1000_bus_width_pciex_1 = 1,
+    e1000_bus_width_pciex_2 = 2,
+    e1000_bus_width_pciex_4 = 4,
     e1000_bus_width_32,
     e1000_bus_width_64,
-    e1000_bus_width_pciex_1,
-    e1000_bus_width_pciex_2,
-    e1000_bus_width_pciex_4,
     e1000_bus_width_reserved
 } e1000_bus_width;
 
@@ -326,6 +328,7 @@ int32_t e1000_phy_hw_reset(struct e1000_hw *hw);
 int32_t e1000_phy_reset(struct e1000_hw *hw);
 int32_t e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info);
 int32_t e1000_validate_mdi_setting(struct e1000_hw *hw);
+
 void e1000_phy_powerdown_workaround(struct e1000_hw *hw);
 
 /* EEPROM Functions */
@@ -390,7 +393,6 @@ int32_t e1000_mng_write_dhcp_info(struct e1000_hw *hw, uint8_t *buffer,
                                   uint16_t length);
 boolean_t e1000_check_mng_mode(struct e1000_hw *hw);
 boolean_t e1000_enable_tx_pkt_filtering(struct e1000_hw *hw);
-
 int32_t e1000_read_eeprom(struct e1000_hw *hw, uint16_t reg, uint16_t words, uint16_t *data);
 int32_t e1000_validate_eeprom_checksum(struct e1000_hw *hw);
 int32_t e1000_update_eeprom_checksum(struct e1000_hw *hw);
@@ -473,6 +475,7 @@ int32_t e1000_check_phy_reset_block(struct e1000_hw *hw);
 #define E1000_DEV_ID_82571EB_FIBER       0x105F
 #define E1000_DEV_ID_82571EB_SERDES      0x1060
 #define E1000_DEV_ID_82571EB_QUAD_COPPER 0x10A4
+#define E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE  0x10BC
 #define E1000_DEV_ID_82572EI_COPPER      0x107D
 #define E1000_DEV_ID_82572EI_FIBER       0x107E
 #define E1000_DEV_ID_82572EI_SERDES      0x107F
@@ -490,6 +493,8 @@ int32_t e1000_check_phy_reset_block(struct e1000_hw *hw);
 #define E1000_DEV_ID_ICH8_IGP_AMT        0x104A
 #define E1000_DEV_ID_ICH8_IGP_C          0x104B
 #define E1000_DEV_ID_ICH8_IFE            0x104C
+#define E1000_DEV_ID_ICH8_IFE_GT         0x10C4
+#define E1000_DEV_ID_ICH8_IFE_G          0x10C5
 #define E1000_DEV_ID_ICH8_IGP_M          0x104D
 
 
@@ -576,6 +581,7 @@ int32_t e1000_check_phy_reset_block(struct e1000_hw *hw);
  * E1000_RAR_ENTRIES - 1 multicast addresses.
  */
 #define E1000_RAR_ENTRIES 15
+
 #define E1000_RAR_ENTRIES_ICH8LAN  6
 
 #define MIN_NUMBER_OF_DESCRIPTORS  8
@@ -1335,9 +1341,9 @@ struct e1000_hw_stats {
     uint64_t gotch;
     uint64_t rnbc;
     uint64_t ruc;
+    uint64_t rfc;
     uint64_t roc;
     uint64_t rlerrc;
-    uint64_t rfc;
     uint64_t rjc;
     uint64_t mgprc;
     uint64_t mgpdc;
@@ -1577,8 +1583,8 @@ struct e1000_hw {
 #define E1000_HICR_FW_RESET  0xC0
 
 #define E1000_SHADOW_RAM_WORDS     2048
-#define E1000_ICH8_NVM_SIG_WORD    0x13
-#define E1000_ICH8_NVM_SIG_MASK    0xC0
+#define E1000_ICH_NVM_SIG_WORD     0x13
+#define E1000_ICH_NVM_SIG_MASK     0xC0
 
 /* EEPROM Read */
 #define E1000_EERD_START      0x00000001 /* Start Read */
@@ -3172,6 +3178,7 @@ struct e1000_host_command_info {
 #define IGP3_VR_CTRL \
         PHY_REG(776, 18) /* Voltage regulator control register */
 #define IGP3_VR_CTRL_MODE_SHUT       0x0200 /* Enter powerdown, shutdown VRs */
+#define IGP3_VR_CTRL_MODE_MASK       0x0300 /* Shutdown VR Mask */
 
 #define IGP3_CAPABILITY \
         PHY_REG(776, 19) /* IGP3 Capability Register */
@@ -3256,41 +3263,40 @@ struct e1000_host_command_info {
 #define IFE_PSCL_PROBE_LEDS_OFF              0x0006  /* Force LEDs 0 and 2 off */
 #define IFE_PSCL_PROBE_LEDS_ON               0x0007  /* Force LEDs 0 and 2 on */
 
-#define ICH8_FLASH_COMMAND_TIMEOUT           5000    /* 5000 uSecs - adjusted */
-#define ICH8_FLASH_ERASE_TIMEOUT             3000000 /* Up to 3 seconds - worst case */
-#define ICH8_FLASH_CYCLE_REPEAT_COUNT        10      /* 10 cycles */
-#define ICH8_FLASH_SEG_SIZE_256              256
-#define ICH8_FLASH_SEG_SIZE_4K               4096
-#define ICH9_FLASH_SEG_SIZE_8K               8192
-#define ICH8_FLASH_SEG_SIZE_64K              65536
-
-#define ICH8_CYCLE_READ                      0x0
-#define ICH8_CYCLE_RESERVED                  0x1
-#define ICH8_CYCLE_WRITE                     0x2
-#define ICH8_CYCLE_ERASE                     0x3
-
-#define ICH8_FLASH_GFPREG   0x0000
-#define ICH8_FLASH_HSFSTS   0x0004
-#define ICH8_FLASH_HSFCTL   0x0006
-#define ICH8_FLASH_FADDR    0x0008
-#define ICH8_FLASH_FDATA0   0x0010
-#define ICH8_FLASH_FRACC    0x0050
-#define ICH8_FLASH_FREG0    0x0054
-#define ICH8_FLASH_FREG1    0x0058
-#define ICH8_FLASH_FREG2    0x005C
-#define ICH8_FLASH_FREG3    0x0060
-#define ICH8_FLASH_FPR0     0x0074
-#define ICH8_FLASH_FPR1     0x0078
-#define ICH8_FLASH_SSFSTS   0x0090
-#define ICH8_FLASH_SSFCTL   0x0092
-#define ICH8_FLASH_PREOP    0x0094
-#define ICH8_FLASH_OPTYPE   0x0096
-#define ICH8_FLASH_OPMENU   0x0098
-
-#define ICH8_FLASH_REG_MAPSIZE      0x00A0
-#define ICH8_FLASH_SECTOR_SIZE      4096
-#define ICH8_GFPREG_BASE_MASK       0x1FFF
-#define ICH8_FLASH_LINEAR_ADDR_MASK 0x00FFFFFF
+#define ICH_FLASH_COMMAND_TIMEOUT            5000    /* 5000 uSecs - adjusted */
+#define ICH_FLASH_ERASE_TIMEOUT              3000000 /* Up to 3 seconds - worst case */
+#define ICH_FLASH_CYCLE_REPEAT_COUNT         10      /* 10 cycles */
+#define ICH_FLASH_SEG_SIZE_256               256
+#define ICH_FLASH_SEG_SIZE_4K                4096
+#define ICH_FLASH_SEG_SIZE_64K               65536
+
+#define ICH_CYCLE_READ                       0x0
+#define ICH_CYCLE_RESERVED                   0x1
+#define ICH_CYCLE_WRITE                      0x2
+#define ICH_CYCLE_ERASE                      0x3
+
+#define ICH_FLASH_GFPREG   0x0000
+#define ICH_FLASH_HSFSTS   0x0004
+#define ICH_FLASH_HSFCTL   0x0006
+#define ICH_FLASH_FADDR    0x0008
+#define ICH_FLASH_FDATA0   0x0010
+#define ICH_FLASH_FRACC    0x0050
+#define ICH_FLASH_FREG0    0x0054
+#define ICH_FLASH_FREG1    0x0058
+#define ICH_FLASH_FREG2    0x005C
+#define ICH_FLASH_FREG3    0x0060
+#define ICH_FLASH_FPR0     0x0074
+#define ICH_FLASH_FPR1     0x0078
+#define ICH_FLASH_SSFSTS   0x0090
+#define ICH_FLASH_SSFCTL   0x0092
+#define ICH_FLASH_PREOP    0x0094
+#define ICH_FLASH_OPTYPE   0x0096
+#define ICH_FLASH_OPMENU   0x0098
+
+#define ICH_FLASH_REG_MAPSIZE      0x00A0
+#define ICH_FLASH_SECTOR_SIZE      4096
+#define ICH_GFPREG_BASE_MASK       0x1FFF
+#define ICH_FLASH_LINEAR_ADDR_MASK 0x00FFFFFF
 
 /* ICH8 GbE Flash Hardware Sequencing Flash Status Register bit breakdown */
 /* Offset 04h HSFSTS */
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 0329440..73f3a85 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -27,6 +27,7 @@
 *******************************************************************************/
 
 #include "e1000.h"
+#include <net/ip6_checksum.h>
 
 char e1000_driver_name[] = "e1000";
 static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver";
@@ -35,7 +36,7 @@ static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver";
 #else
 #define DRIVERNAPI "-NAPI"
 #endif
-#define DRV_VERSION "7.2.9-k4"DRIVERNAPI
+#define DRV_VERSION "7.3.15-k2"DRIVERNAPI
 char e1000_driver_version[] = DRV_VERSION;
 static char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation.";
 
@@ -103,6 +104,9 @@ static struct pci_device_id e1000_pci_tbl[] = {
 	INTEL_E1000_ETHERNET_DEVICE(0x10B9),
 	INTEL_E1000_ETHERNET_DEVICE(0x10BA),
 	INTEL_E1000_ETHERNET_DEVICE(0x10BB),
+	INTEL_E1000_ETHERNET_DEVICE(0x10BC),
+	INTEL_E1000_ETHERNET_DEVICE(0x10C4),
+	INTEL_E1000_ETHERNET_DEVICE(0x10C5),
 	/* required last entry */
 	{0,}
 };
@@ -154,6 +158,9 @@ static struct net_device_stats * e1000_get_stats(struct net_device *netdev);
 static int e1000_change_mtu(struct net_device *netdev, int new_mtu);
 static int e1000_set_mac(struct net_device *netdev, void *p);
 static irqreturn_t e1000_intr(int irq, void *data);
+#ifdef CONFIG_PCI_MSI
+static irqreturn_t e1000_intr_msi(int irq, void *data);
+#endif
 static boolean_t e1000_clean_tx_irq(struct e1000_adapter *adapter,
                                     struct e1000_tx_ring *tx_ring);
 #ifdef CONFIG_E1000_NAPI
@@ -285,7 +292,7 @@ static int e1000_request_irq(struct e1000_adapter *adapter)
 
 	flags = IRQF_SHARED;
 #ifdef CONFIG_PCI_MSI
-	if (adapter->hw.mac_type > e1000_82547_rev_2) {
+	if (adapter->hw.mac_type >= e1000_82571) {
 		adapter->have_msi = TRUE;
 		if ((err = pci_enable_msi(adapter->pdev))) {
 			DPRINTK(PROBE, ERR,
@@ -293,8 +300,14 @@ static int e1000_request_irq(struct e1000_adapter *adapter)
 			adapter->have_msi = FALSE;
 		}
 	}
-	if (adapter->have_msi)
+	if (adapter->have_msi) {
 		flags &= ~IRQF_SHARED;
+		err = request_irq(adapter->pdev->irq, &e1000_intr_msi, flags,
+		                  netdev->name, netdev);
+		if (err)
+			DPRINTK(PROBE, ERR,
+			       "Unable to allocate interrupt Error: %d\n", err);
+	} else
 #endif
 	if ((err = request_irq(adapter->pdev->irq, &e1000_intr, flags,
 	                       netdev->name, netdev)))
@@ -375,7 +388,7 @@ e1000_update_mng_vlan(struct e1000_adapter *adapter)
  * e1000_release_hw_control resets {CTRL_EXT|FWSM}:DRV_LOAD bit.
  * For ASF and Pass Through versions of f/w this means that the
  * driver is no longer loaded. For AMT version (only with 82573) i
- * of the f/w this means that the netowrk i/f is closed.
+ * of the f/w this means that the network i/f is closed.
  *
  **/
 
@@ -416,7 +429,7 @@ e1000_release_hw_control(struct e1000_adapter *adapter)
  * e1000_get_hw_control sets {CTRL_EXT|FWSM}:DRV_LOAD bit.
  * For ASF and Pass Through versions of f/w this means that
  * the driver is loaded. For AMT version (only with 82573)
- * of the f/w this means that the netowrk i/f is open.
+ * of the f/w this means that the network i/f is open.
  *
  **/
 
@@ -426,6 +439,7 @@ e1000_get_hw_control(struct e1000_adapter *adapter)
 	uint32_t ctrl_ext;
 	uint32_t swsm;
 	uint32_t extcnf;
+
 	/* Let firmware know the driver has taken over */
 	switch (adapter->hw.mac_type) {
 	case e1000_82571:
@@ -601,9 +615,6 @@ void
 e1000_reset(struct e1000_adapter *adapter)
 {
 	uint32_t pba, manc;
-#ifdef DISABLE_MULR
-	uint32_t tctl;
-#endif
 	uint16_t fc_high_water_mark = E1000_FC_HIGH_DIFF;
 
 	/* Repartition Pba for greater than 9k mtu
@@ -670,12 +681,7 @@ e1000_reset(struct e1000_adapter *adapter)
 	e1000_reset_hw(&adapter->hw);
 	if (adapter->hw.mac_type >= e1000_82544)
 		E1000_WRITE_REG(&adapter->hw, WUC, 0);
-#ifdef DISABLE_MULR
-	/* disable Multiple Reads in Transmit Control Register for debugging */
-	tctl = E1000_READ_REG(hw, TCTL);
-	E1000_WRITE_REG(hw, TCTL, tctl & ~E1000_TCTL_MULR);
 
-#endif
 	if (e1000_init_hw(&adapter->hw))
 		DPRINTK(PROBE, ERR, "Hardware Error\n");
 	e1000_update_mng_vlan(adapter);
@@ -851,9 +857,9 @@ e1000_probe(struct pci_dev *pdev,
 	   (adapter->hw.mac_type != e1000_82547))
 		netdev->features |= NETIF_F_TSO;
 
-#ifdef NETIF_F_TSO_IPV6
+#ifdef NETIF_F_TSO6
 	if (adapter->hw.mac_type > e1000_82547_rev_2)
-		netdev->features |= NETIF_F_TSO_IPV6;
+		netdev->features |= NETIF_F_TSO6;
 #endif
 #endif
 	if (pci_using_dac)
@@ -967,6 +973,7 @@ e1000_probe(struct pci_dev *pdev,
 		break;
 	case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
 	case E1000_DEV_ID_82571EB_QUAD_COPPER:
+	case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE:
 		/* if quad port adapter, disable WoL on all but port A */
 		if (global_quad_port_a != 0)
 			adapter->eeprom_wol = 0;
@@ -1278,12 +1285,10 @@ e1000_open(struct net_device *netdev)
 		return -EBUSY;
 
 	/* allocate transmit descriptors */
-
 	if ((err = e1000_setup_all_tx_resources(adapter)))
 		goto err_setup_tx;
 
 	/* allocate receive descriptors */
-
 	if ((err = e1000_setup_all_rx_resources(adapter)))
 		goto err_setup_rx;
 
@@ -1568,6 +1573,8 @@ e1000_configure_tx(struct e1000_adapter *adapter)
 
 	if (hw->mac_type == e1000_82571 || hw->mac_type == e1000_82572) {
 		tarc = E1000_READ_REG(hw, TARC0);
+		/* set the speed mode bit, we'll clear it if we're not at
+		 * gigabit link later */
 		tarc |= (1 << 21);
 		E1000_WRITE_REG(hw, TARC0, tarc);
 	} else if (hw->mac_type == e1000_80003es2lan) {
@@ -1582,8 +1589,11 @@ e1000_configure_tx(struct e1000_adapter *adapter)
 	e1000_config_collision_dist(hw);
 
 	/* Setup Transmit Descriptor Settings for eop descriptor */
-	adapter->txd_cmd = E1000_TXD_CMD_IDE | E1000_TXD_CMD_EOP |
-		E1000_TXD_CMD_IFCS;
+	adapter->txd_cmd = E1000_TXD_CMD_EOP | E1000_TXD_CMD_IFCS;
+
+	/* only set IDE if we are delaying interrupts using the timers */
+	if (adapter->tx_int_delay)
+		adapter->txd_cmd |= E1000_TXD_CMD_IDE;
 
 	if (hw->mac_type < e1000_82543)
 		adapter->txd_cmd |= E1000_TXD_CMD_RPS;
@@ -1820,8 +1830,11 @@ e1000_setup_rctl(struct e1000_adapter *adapter)
 		/* Configure extra packet-split registers */
 		rfctl = E1000_READ_REG(&adapter->hw, RFCTL);
 		rfctl |= E1000_RFCTL_EXTEN;
-		/* disable IPv6 packet split support */
-		rfctl |= E1000_RFCTL_IPV6_DIS;
+		/* disable packet split support for IPv6 extension headers,
+		 * because some malformed IPv6 headers can hang the RX */
+		rfctl |= (E1000_RFCTL_IPV6_EX_DIS |
+		          E1000_RFCTL_NEW_IPV6_EXT_DIS);
+
 		E1000_WRITE_REG(&adapter->hw, RFCTL, rfctl);
 
 		rctl |= E1000_RCTL_DTYP_PS;
@@ -1884,7 +1897,7 @@ e1000_configure_rx(struct e1000_adapter *adapter)
 
 	if (hw->mac_type >= e1000_82540) {
 		E1000_WRITE_REG(hw, RADV, adapter->rx_abs_int_delay);
-		if (adapter->itr > 1)
+		if (adapter->itr_setting != 0)
 			E1000_WRITE_REG(hw, ITR,
 				1000000000 / (adapter->itr * 256));
 	}
@@ -1894,11 +1907,11 @@ e1000_configure_rx(struct e1000_adapter *adapter)
 		/* Reset delay timers after every interrupt */
 		ctrl_ext |= E1000_CTRL_EXT_INT_TIMER_CLR;
 #ifdef CONFIG_E1000_NAPI
-		/* Auto-Mask interrupts upon ICR read. */
+		/* Auto-Mask interrupts upon ICR access */
 		ctrl_ext |= E1000_CTRL_EXT_IAME;
+		E1000_WRITE_REG(hw, IAM, 0xffffffff);
 #endif
 		E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext);
-		E1000_WRITE_REG(hw, IAM, ~0);
 		E1000_WRITE_FLUSH(hw);
 	}
 
@@ -1937,6 +1950,12 @@ e1000_configure_rx(struct e1000_adapter *adapter)
 		E1000_WRITE_REG(hw, RXCSUM, rxcsum);
 	}
 
+	/* enable early receives on 82573, only takes effect if using > 2048
+	 * byte total frame size.  for example only for jumbo frames */
+#define E1000_ERT_2048 0x100
+	if (hw->mac_type == e1000_82573)
+		E1000_WRITE_REG(hw, ERT, E1000_ERT_2048);
+
 	/* Enable Receives */
 	E1000_WRITE_REG(hw, RCTL, rctl);
 }
@@ -1990,10 +2009,13 @@ e1000_unmap_and_free_tx_resource(struct e1000_adapter *adapter,
 				buffer_info->dma,
 				buffer_info->length,
 				PCI_DMA_TODEVICE);
+		buffer_info->dma = 0;
 	}
-	if (buffer_info->skb)
+	if (buffer_info->skb) {
 		dev_kfree_skb_any(buffer_info->skb);
-	memset(buffer_info, 0, sizeof(struct e1000_buffer));
+		buffer_info->skb = NULL;
+	}
+	/* buffer_info must be completely set up in the transmit path */
 }
 
 /**
@@ -2417,6 +2439,7 @@ e1000_watchdog(unsigned long data)
 		DPRINTK(LINK, INFO,
 			"Gigabit has been disabled, downgrading speed\n");
 	}
+
 	if (adapter->hw.mac_type == e1000_82573) {
 		e1000_enable_tx_pkt_filtering(&adapter->hw);
 		if (adapter->mng_vlan_id != adapter->hw.mng_cookie.vlan_id)
@@ -2461,13 +2484,12 @@ e1000_watchdog(unsigned long data)
 			if ((adapter->hw.mac_type == e1000_82571 ||
 			     adapter->hw.mac_type == e1000_82572) &&
 			    txb2b == 0) {
-#define SPEED_MODE_BIT (1 << 21)
 				uint32_t tarc0;
 				tarc0 = E1000_READ_REG(&adapter->hw, TARC0);
-				tarc0 &= ~SPEED_MODE_BIT;
+				tarc0 &= ~(1 << 21);
 				E1000_WRITE_REG(&adapter->hw, TARC0, tarc0);
 			}
-				
+
 #ifdef NETIF_F_TSO
 			/* disable TSO for pcie and 10/100 speeds, to avoid
 			 * some hardware issues */
@@ -2479,9 +2501,15 @@ e1000_watchdog(unsigned long data)
 					DPRINTK(PROBE,INFO,
 				        "10/100 speed: disabling TSO\n");
 					netdev->features &= ~NETIF_F_TSO;
+#ifdef NETIF_F_TSO6
+					netdev->features &= ~NETIF_F_TSO6;
+#endif
 					break;
 				case SPEED_1000:
 					netdev->features |= NETIF_F_TSO;
+#ifdef NETIF_F_TSO6
+					netdev->features |= NETIF_F_TSO6;
+#endif
 					break;
 				default:
 					/* oops */
@@ -2548,19 +2576,6 @@ e1000_watchdog(unsigned long data)
 		}
 	}
 
-	/* Dynamic mode for Interrupt Throttle Rate (ITR) */
-	if (adapter->hw.mac_type >= e1000_82540 && adapter->itr == 1) {
-		/* Symmetric Tx/Rx gets a reduced ITR=2000; Total
-		 * asymmetrical Tx or Rx gets ITR=8000; everyone
-		 * else is between 2000-8000. */
-		uint32_t goc = (adapter->gotcl + adapter->gorcl) / 10000;
-		uint32_t dif = (adapter->gotcl > adapter->gorcl ?
-			adapter->gotcl - adapter->gorcl :
-			adapter->gorcl - adapter->gotcl) / 10000;
-		uint32_t itr = goc > 0 ? (dif * 6000 / goc + 2000) : 8000;
-		E1000_WRITE_REG(&adapter->hw, ITR, 1000000000 / (itr * 256));
-	}
-
 	/* Cause software interrupt to ensure rx ring is cleaned */
 	E1000_WRITE_REG(&adapter->hw, ICS, E1000_ICS_RXDMT0);
 
@@ -2576,6 +2591,135 @@ e1000_watchdog(unsigned long data)
 	mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ);
 }
 
+enum latency_range {
+	lowest_latency = 0,
+	low_latency = 1,
+	bulk_latency = 2,
+	latency_invalid = 255
+};
+
+/**
+ * e1000_update_itr - update the dynamic ITR value based on statistics
+ *      Stores a new ITR value based on packets and byte
+ *      counts during the last interrupt.  The advantage of per interrupt
+ *      computation is faster updates and more accurate ITR for the current
+ *      traffic pattern.  Constants in this function were computed
+ *      based on theoretical maximum wire speed and thresholds were set based
+ *      on testing data as well as attempting to minimize response time
+ *      while increasing bulk throughput.
+ *      this functionality is controlled by the InterruptThrottleRate module
+ *      parameter (see e1000_param.c)
+ * @adapter: pointer to adapter
+ * @itr_setting: current adapter->itr
+ * @packets: the number of packets during this measurement interval
+ * @bytes: the number of bytes during this measurement interval
+ **/
+static unsigned int e1000_update_itr(struct e1000_adapter *adapter,
+                                   uint16_t itr_setting,
+                                   int packets,
+                                   int bytes)
+{
+	unsigned int retval = itr_setting;
+	struct e1000_hw *hw = &adapter->hw;
+
+	if (unlikely(hw->mac_type < e1000_82540))
+		goto update_itr_done;
+
+	if (packets == 0)
+		goto update_itr_done;
+
+
+	switch (itr_setting) {
+	case lowest_latency:
+		if ((packets < 5) && (bytes > 512))
+			retval = low_latency;
+		break;
+	case low_latency:  /* 50 usec aka 20000 ints/s */
+		if (bytes > 10000) {
+			if ((packets < 10) ||
+			     ((bytes/packets) > 1200))
+				retval = bulk_latency;
+			else if ((packets > 35))
+				retval = lowest_latency;
+		} else if (packets <= 2 && bytes < 512)
+			retval = lowest_latency;
+		break;
+	case bulk_latency: /* 250 usec aka 4000 ints/s */
+		if (bytes > 25000) {
+			if (packets > 35)
+				retval = low_latency;
+		} else {
+			if (bytes < 6000)
+				retval = low_latency;
+		}
+		break;
+	}
+
+update_itr_done:
+	return retval;
+}
+
+static void e1000_set_itr(struct e1000_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	uint16_t current_itr;
+	uint32_t new_itr = adapter->itr;
+
+	if (unlikely(hw->mac_type < e1000_82540))
+		return;
+
+	/* for non-gigabit speeds, just fix the interrupt rate at 4000 */
+	if (unlikely(adapter->link_speed != SPEED_1000)) {
+		current_itr = 0;
+		new_itr = 4000;
+		goto set_itr_now;
+	}
+
+	adapter->tx_itr = e1000_update_itr(adapter,
+	                            adapter->tx_itr,
+	                            adapter->total_tx_packets,
+	                            adapter->total_tx_bytes);
+	adapter->rx_itr = e1000_update_itr(adapter,
+	                            adapter->rx_itr,
+	                            adapter->total_rx_packets,
+	                            adapter->total_rx_bytes);
+
+	current_itr = max(adapter->rx_itr, adapter->tx_itr);
+
+	/* conservative mode eliminates the lowest_latency setting */
+	if (current_itr == lowest_latency && (adapter->itr_setting == 3))
+		current_itr = low_latency;
+
+	switch (current_itr) {
+	/* counts and packets in update_itr are dependent on these numbers */
+	case lowest_latency:
+		new_itr = 70000;
+		break;
+	case low_latency:
+		new_itr = 20000; /* aka hwitr = ~200 */
+		break;
+	case bulk_latency:
+		new_itr = 4000;
+		break;
+	default:
+		break;
+	}
+
+set_itr_now:
+	if (new_itr != adapter->itr) {
+		/* this attempts to bias the interrupt rate towards Bulk
+		 * by adding intermediate steps when interrupt rate is
+		 * increasing */
+		new_itr = new_itr > adapter->itr ?
+		             min(adapter->itr + (new_itr >> 2), new_itr) :
+		             new_itr;
+		adapter->itr = new_itr;
+		E1000_WRITE_REG(hw, ITR, 1000000000 / (new_itr * 256));
+	}
+
+	return;
+}
+
 #define E1000_TX_FLAGS_CSUM		0x00000001
 #define E1000_TX_FLAGS_VLAN		0x00000002
 #define E1000_TX_FLAGS_TSO		0x00000004
@@ -2616,7 +2760,7 @@ e1000_tso(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
 						   0);
 			cmd_length = E1000_TXD_CMD_IP;
 			ipcse = skb->h.raw - skb->data - 1;
-#ifdef NETIF_F_TSO_IPV6
+#ifdef NETIF_F_TSO6
 		} else if (skb->protocol == htons(ETH_P_IPV6)) {
 			skb->nh.ipv6h->payload_len = 0;
 			skb->h.th->check =
@@ -2652,6 +2796,7 @@ e1000_tso(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
 		context_desc->cmd_and_length = cpu_to_le32(cmd_length);
 
 		buffer_info->time_stamp = jiffies;
+		buffer_info->next_to_watch = i;
 
 		if (++i == tx_ring->count) i = 0;
 		tx_ring->next_to_use = i;
@@ -2680,12 +2825,13 @@ e1000_tx_csum(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
 		context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
 
 		context_desc->upper_setup.tcp_fields.tucss = css;
-		context_desc->upper_setup.tcp_fields.tucso = css + skb->csum;
+		context_desc->upper_setup.tcp_fields.tucso = css + skb->csum_offset;
 		context_desc->upper_setup.tcp_fields.tucse = 0;
 		context_desc->tcp_seg_setup.data = 0;
 		context_desc->cmd_and_length = cpu_to_le32(E1000_TXD_CMD_DEXT);
 
 		buffer_info->time_stamp = jiffies;
+		buffer_info->next_to_watch = i;
 
 		if (unlikely(++i == tx_ring->count)) i = 0;
 		tx_ring->next_to_use = i;
@@ -2754,6 +2900,7 @@ e1000_tx_map(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
 				size,
 				PCI_DMA_TODEVICE);
 		buffer_info->time_stamp = jiffies;
+		buffer_info->next_to_watch = i;
 
 		len -= size;
 		offset += size;
@@ -2793,6 +2940,7 @@ e1000_tx_map(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
 					size,
 					PCI_DMA_TODEVICE);
 			buffer_info->time_stamp = jiffies;
+			buffer_info->next_to_watch = i;
 
 			len -= size;
 			offset += size;
@@ -2858,6 +3006,9 @@ e1000_tx_queue(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
 
 	tx_ring->next_to_use = i;
 	writel(i, adapter->hw.hw_addr + tx_ring->tdt);
+	/* we need this if more than one processor can write to our tail
+	 * at a time, it syncronizes IO on IA64/Altix systems */
+	mmiowb();
 }
 
 /**
@@ -2951,6 +3102,7 @@ static int __e1000_maybe_stop_tx(struct net_device *netdev, int size)
 
 	/* A reprieve! */
 	netif_start_queue(netdev);
+	++adapter->restart_queue;
 	return 0;
 }
 
@@ -3009,9 +3161,9 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 		max_per_txd = min(mss << 2, max_per_txd);
 		max_txd_pwr = fls(max_per_txd) - 1;
 
-	/* TSO Workaround for 82571/2/3 Controllers -- if skb->data
-	 * points to just header, pull a few bytes of payload from
-	 * frags into skb->data */
+		/* TSO Workaround for 82571/2/3 Controllers -- if skb->data
+		* points to just header, pull a few bytes of payload from
+		* frags into skb->data */
 		hdr_len = ((skb->h.raw - skb->data) + (skb->h.th->doff << 2));
 		if (skb->data_len && (hdr_len == (skb->len - skb->data_len))) {
 			switch (adapter->hw.mac_type) {
@@ -3316,12 +3468,12 @@ e1000_update_stats(struct e1000_adapter *adapter)
 	adapter->stats.roc += E1000_READ_REG(hw, ROC);
 
 	if (adapter->hw.mac_type != e1000_ich8lan) {
-	adapter->stats.prc64 += E1000_READ_REG(hw, PRC64);
-	adapter->stats.prc127 += E1000_READ_REG(hw, PRC127);
-	adapter->stats.prc255 += E1000_READ_REG(hw, PRC255);
-	adapter->stats.prc511 += E1000_READ_REG(hw, PRC511);
-	adapter->stats.prc1023 += E1000_READ_REG(hw, PRC1023);
-	adapter->stats.prc1522 += E1000_READ_REG(hw, PRC1522);
+		adapter->stats.prc64 += E1000_READ_REG(hw, PRC64);
+		adapter->stats.prc127 += E1000_READ_REG(hw, PRC127);
+		adapter->stats.prc255 += E1000_READ_REG(hw, PRC255);
+		adapter->stats.prc511 += E1000_READ_REG(hw, PRC511);
+		adapter->stats.prc1023 += E1000_READ_REG(hw, PRC1023);
+		adapter->stats.prc1522 += E1000_READ_REG(hw, PRC1522);
 	}
 
 	adapter->stats.symerrs += E1000_READ_REG(hw, SYMERRS);
@@ -3352,12 +3504,12 @@ e1000_update_stats(struct e1000_adapter *adapter)
 	adapter->stats.tpr += E1000_READ_REG(hw, TPR);
 
 	if (adapter->hw.mac_type != e1000_ich8lan) {
-	adapter->stats.ptc64 += E1000_READ_REG(hw, PTC64);
-	adapter->stats.ptc127 += E1000_READ_REG(hw, PTC127);
-	adapter->stats.ptc255 += E1000_READ_REG(hw, PTC255);
-	adapter->stats.ptc511 += E1000_READ_REG(hw, PTC511);
-	adapter->stats.ptc1023 += E1000_READ_REG(hw, PTC1023);
-	adapter->stats.ptc1522 += E1000_READ_REG(hw, PTC1522);
+		adapter->stats.ptc64 += E1000_READ_REG(hw, PTC64);
+		adapter->stats.ptc127 += E1000_READ_REG(hw, PTC127);
+		adapter->stats.ptc255 += E1000_READ_REG(hw, PTC255);
+		adapter->stats.ptc511 += E1000_READ_REG(hw, PTC511);
+		adapter->stats.ptc1023 += E1000_READ_REG(hw, PTC1023);
+		adapter->stats.ptc1522 += E1000_READ_REG(hw, PTC1522);
 	}
 
 	adapter->stats.mptc += E1000_READ_REG(hw, MPTC);
@@ -3383,18 +3535,17 @@ e1000_update_stats(struct e1000_adapter *adapter)
 		adapter->stats.icrxoc += E1000_READ_REG(hw, ICRXOC);
 
 		if (adapter->hw.mac_type != e1000_ich8lan) {
-		adapter->stats.icrxptc += E1000_READ_REG(hw, ICRXPTC);
-		adapter->stats.icrxatc += E1000_READ_REG(hw, ICRXATC);
-		adapter->stats.ictxptc += E1000_READ_REG(hw, ICTXPTC);
-		adapter->stats.ictxatc += E1000_READ_REG(hw, ICTXATC);
-		adapter->stats.ictxqec += E1000_READ_REG(hw, ICTXQEC);
-		adapter->stats.ictxqmtc += E1000_READ_REG(hw, ICTXQMTC);
-		adapter->stats.icrxdmtc += E1000_READ_REG(hw, ICRXDMTC);
+			adapter->stats.icrxptc += E1000_READ_REG(hw, ICRXPTC);
+			adapter->stats.icrxatc += E1000_READ_REG(hw, ICRXATC);
+			adapter->stats.ictxptc += E1000_READ_REG(hw, ICTXPTC);
+			adapter->stats.ictxatc += E1000_READ_REG(hw, ICTXATC);
+			adapter->stats.ictxqec += E1000_READ_REG(hw, ICTXQEC);
+			adapter->stats.ictxqmtc += E1000_READ_REG(hw, ICTXQMTC);
+			adapter->stats.icrxdmtc += E1000_READ_REG(hw, ICRXDMTC);
 		}
 	}
 
 	/* Fill out the OS statistics structure */
-
 	adapter->net_stats.rx_packets = adapter->stats.gprc;
 	adapter->net_stats.tx_packets = adapter->stats.gptc;
 	adapter->net_stats.rx_bytes = adapter->stats.gorcl;
@@ -3426,7 +3577,6 @@ e1000_update_stats(struct e1000_adapter *adapter)
 	/* Tx Dropped needs to be maintained elsewhere */
 
 	/* Phy Stats */
-
 	if (hw->media_type == e1000_media_type_copper) {
 		if ((adapter->link_speed == SPEED_1000) &&
 		   (!e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_tmp))) {
@@ -3442,6 +3592,95 @@ e1000_update_stats(struct e1000_adapter *adapter)
 
 	spin_unlock_irqrestore(&adapter->stats_lock, flags);
 }
+#ifdef CONFIG_PCI_MSI
+
+/**
+ * e1000_intr_msi - Interrupt Handler
+ * @irq: interrupt number
+ * @data: pointer to a network interface device structure
+ **/
+
+static
+irqreturn_t e1000_intr_msi(int irq, void *data)
+{
+	struct net_device *netdev = data;
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+#ifndef CONFIG_E1000_NAPI
+	int i;
+#endif
+
+	/* this code avoids the read of ICR but has to get 1000 interrupts
+	 * at every link change event before it will notice the change */
+	if (++adapter->detect_link >= 1000) {
+		uint32_t icr = E1000_READ_REG(hw, ICR);
+#ifdef CONFIG_E1000_NAPI
+		/* read ICR disables interrupts using IAM, so keep up with our
+		 * enable/disable accounting */
+		atomic_inc(&adapter->irq_sem);
+#endif
+		adapter->detect_link = 0;
+		if ((icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) &&
+		    (icr & E1000_ICR_INT_ASSERTED)) {
+			hw->get_link_status = 1;
+			/* 80003ES2LAN workaround--
+			* For packet buffer work-around on link down event;
+			* disable receives here in the ISR and
+			* reset adapter in watchdog
+			*/
+			if (netif_carrier_ok(netdev) &&
+			    (adapter->hw.mac_type == e1000_80003es2lan)) {
+				/* disable receives */
+				uint32_t rctl = E1000_READ_REG(hw, RCTL);
+				E1000_WRITE_REG(hw, RCTL, rctl & ~E1000_RCTL_EN);
+			}
+			/* guard against interrupt when we're going down */
+			if (!test_bit(__E1000_DOWN, &adapter->flags))
+				mod_timer(&adapter->watchdog_timer,
+				          jiffies + 1);
+		}
+	} else {
+		E1000_WRITE_REG(hw, ICR, (0xffffffff & ~(E1000_ICR_RXSEQ |
+		                                         E1000_ICR_LSC)));
+		/* bummer we have to flush here, but things break otherwise as
+		 * some event appears to be lost or delayed and throughput
+		 * drops.  In almost all tests this flush is un-necessary */
+		E1000_WRITE_FLUSH(hw);
+#ifdef CONFIG_E1000_NAPI
+		/* Interrupt Auto-Mask (IAM)...upon writing ICR, interrupts are
+		 * masked.  No need for the IMC write, but it does mean we
+		 * should account for it ASAP. */
+		atomic_inc(&adapter->irq_sem);
+#endif
+	}
+
+#ifdef CONFIG_E1000_NAPI
+	if (likely(netif_rx_schedule_prep(netdev))) {
+		adapter->total_tx_bytes = 0;
+		adapter->total_tx_packets = 0;
+		adapter->total_rx_bytes = 0;
+		adapter->total_rx_packets = 0;
+		__netif_rx_schedule(netdev);
+	} else
+		e1000_irq_enable(adapter);
+#else
+	adapter->total_tx_bytes = 0;
+	adapter->total_rx_bytes = 0;
+	adapter->total_tx_packets = 0;
+	adapter->total_rx_packets = 0;
+
+	for (i = 0; i < E1000_MAX_INTR; i++)
+		if (unlikely(!adapter->clean_rx(adapter, adapter->rx_ring) &
+		   !e1000_clean_tx_irq(adapter, adapter->tx_ring)))
+			break;
+
+	if (likely(adapter->itr_setting & 3))
+		e1000_set_itr(adapter);
+#endif
+
+	return IRQ_HANDLED;
+}
+#endif
 
 /**
  * e1000_intr - Interrupt Handler
@@ -3458,7 +3697,17 @@ e1000_intr(int irq, void *data)
 	uint32_t rctl, icr = E1000_READ_REG(hw, ICR);
 #ifndef CONFIG_E1000_NAPI
 	int i;
-#else
+#endif
+	if (unlikely(!icr))
+		return IRQ_NONE;  /* Not our interrupt */
+
+#ifdef CONFIG_E1000_NAPI
+	/* IMS will not auto-mask if INT_ASSERTED is not set, and if it is
+	 * not set, then the adapter didn't send an interrupt */
+	if (unlikely(hw->mac_type >= e1000_82571 &&
+	             !(icr & E1000_ICR_INT_ASSERTED)))
+		return IRQ_NONE;
+
 	/* Interrupt Auto-Mask...upon reading ICR,
 	 * interrupts are masked.  No need for the
 	 * IMC write, but it does mean we should
@@ -3467,14 +3716,6 @@ e1000_intr(int irq, void *data)
 		atomic_inc(&adapter->irq_sem);
 #endif
 
-	if (unlikely(!icr)) {
-#ifdef CONFIG_E1000_NAPI
-		if (hw->mac_type >= e1000_82571)
-			e1000_irq_enable(adapter);
-#endif
-		return IRQ_NONE;  /* Not our interrupt */
-	}
-
 	if (unlikely(icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC))) {
 		hw->get_link_status = 1;
 		/* 80003ES2LAN workaround--
@@ -3495,13 +3736,20 @@ e1000_intr(int irq, void *data)
 
 #ifdef CONFIG_E1000_NAPI
 	if (unlikely(hw->mac_type < e1000_82571)) {
+		/* disable interrupts, without the synchronize_irq bit */
 		atomic_inc(&adapter->irq_sem);
 		E1000_WRITE_REG(hw, IMC, ~0);
 		E1000_WRITE_FLUSH(hw);
 	}
-	if (likely(netif_rx_schedule_prep(netdev)))
+	if (likely(netif_rx_schedule_prep(netdev))) {
+		adapter->total_tx_bytes = 0;
+		adapter->total_tx_packets = 0;
+		adapter->total_rx_bytes = 0;
+		adapter->total_rx_packets = 0;
 		__netif_rx_schedule(netdev);
-	else
+	} else
+		/* this really should not happen! if it does it is basically a
+		 * bug, but not a hard error, so enable ints and continue */
 		e1000_irq_enable(adapter);
 #else
 	/* Writing IMC and IMS is needed for 82547.
@@ -3519,16 +3767,23 @@ e1000_intr(int irq, void *data)
 		E1000_WRITE_REG(hw, IMC, ~0);
 	}
 
+	adapter->total_tx_bytes = 0;
+	adapter->total_rx_bytes = 0;
+	adapter->total_tx_packets = 0;
+	adapter->total_rx_packets = 0;
+
 	for (i = 0; i < E1000_MAX_INTR; i++)
 		if (unlikely(!adapter->clean_rx(adapter, adapter->rx_ring) &
 		   !e1000_clean_tx_irq(adapter, adapter->tx_ring)))
 			break;
 
+	if (likely(adapter->itr_setting & 3))
+		e1000_set_itr(adapter);
+
 	if (hw->mac_type == e1000_82547 || hw->mac_type == e1000_82547_rev_2)
 		e1000_irq_enable(adapter);
 
 #endif
-
 	return IRQ_HANDLED;
 }
 
@@ -3572,6 +3827,8 @@ e1000_clean(struct net_device *poll_dev, int *budget)
 	if ((!tx_cleaned && (work_done == 0)) ||
 	   !netif_running(poll_dev)) {
 quit_polling:
+		if (likely(adapter->itr_setting & 3))
+			e1000_set_itr(adapter);
 		netif_rx_complete(poll_dev);
 		e1000_irq_enable(adapter);
 		return 0;
@@ -3598,6 +3855,7 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter,
 	unsigned int count = 0;
 #endif
 	boolean_t cleaned = FALSE;
+	unsigned int total_tx_bytes=0, total_tx_packets=0;
 
 	i = tx_ring->next_to_clean;
 	eop = tx_ring->buffer_info[i].next_to_watch;
@@ -3609,13 +3867,19 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter,
 			buffer_info = &tx_ring->buffer_info[i];
 			cleaned = (i == eop);
 
+			if (cleaned) {
+				/* this packet count is wrong for TSO but has a
+				 * tendency to make dynamic ITR change more
+				 * towards bulk */
+				total_tx_packets++;
+				total_tx_bytes += buffer_info->skb->len;
+			}
 			e1000_unmap_and_free_tx_resource(adapter, buffer_info);
-			memset(tx_desc, 0, sizeof(struct e1000_tx_desc));
+			tx_desc->upper.data = 0;
 
 			if (unlikely(++i == tx_ring->count)) i = 0;
 		}
 
-
 		eop = tx_ring->buffer_info[i].next_to_watch;
 		eop_desc = E1000_TX_DESC(*tx_ring, eop);
 #ifdef CONFIG_E1000_NAPI
@@ -3634,8 +3898,10 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter,
 		 * sees the new next_to_clean.
 		 */
 		smp_mb();
-		if (netif_queue_stopped(netdev))
+		if (netif_queue_stopped(netdev)) {
 			netif_wake_queue(netdev);
+			++adapter->restart_queue;
+		}
 	}
 
 	if (adapter->detect_tx_hung) {
@@ -3673,6 +3939,8 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter,
 			netif_stop_queue(netdev);
 		}
 	}
+	adapter->total_tx_bytes += total_tx_bytes;
+	adapter->total_tx_packets += total_tx_packets;
 	return cleaned;
 }
 
@@ -3752,6 +4020,7 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter,
 	unsigned int i;
 	int cleaned_count = 0;
 	boolean_t cleaned = FALSE;
+	unsigned int total_rx_bytes=0, total_rx_packets=0;
 
 	i = rx_ring->next_to_clean;
 	rx_desc = E1000_RX_DESC(*rx_ring, i);
@@ -3760,6 +4029,7 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter,
 	while (rx_desc->status & E1000_RXD_STAT_DD) {
 		struct sk_buff *skb;
 		u8 status;
+
 #ifdef CONFIG_E1000_NAPI
 		if (*work_done >= work_to_do)
 			break;
@@ -3817,6 +4087,10 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter,
 		 * done after the TBI_ACCEPT workaround above */
 		length -= 4;
 
+		/* probably a little skewed due to removing CRC */
+		total_rx_bytes += length;
+		total_rx_packets++;
+
 		/* code added for copybreak, this should improve
 		 * performance for small packets with large amounts
 		 * of reassembly being done in the stack */
@@ -3832,12 +4106,11 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter,
 				/* save the skb in buffer_info as good */
 				buffer_info->skb = skb;
 				skb = new_skb;
-				skb_put(skb, length);
 			}
-		} else
-			skb_put(skb, length);
-
+			/* else just continue with the old one */
+		}
 		/* end copybreak code */
+		skb_put(skb, length);
 
 		/* Receive Checksum Offload */
 		e1000_rx_checksum(adapter,
@@ -3886,6 +4159,8 @@ next_desc:
 	if (cleaned_count)
 		adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
 
+	adapter->total_rx_packets += total_rx_packets;
+	adapter->total_rx_bytes += total_rx_bytes;
 	return cleaned;
 }
 
@@ -3915,6 +4190,7 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
 	uint32_t length, staterr;
 	int cleaned_count = 0;
 	boolean_t cleaned = FALSE;
+	unsigned int total_rx_bytes=0, total_rx_packets=0;
 
 	i = rx_ring->next_to_clean;
 	rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
@@ -3999,7 +4275,7 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
 			goto copydone;
 		} /* if */
 		}
-		
+
 		for (j = 0; j < adapter->rx_ps_pages; j++) {
 			if (!(length= le16_to_cpu(rx_desc->wb.upper.length[j])))
 				break;
@@ -4019,6 +4295,9 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
 		pskb_trim(skb, skb->len - 4);
 
 copydone:
+		total_rx_bytes += skb->len;
+		total_rx_packets++;
+
 		e1000_rx_checksum(adapter, staterr,
 				  le16_to_cpu(rx_desc->wb.lower.hi_dword.csum_ip.csum), skb);
 		skb->protocol = eth_type_trans(skb, netdev);
@@ -4067,6 +4346,8 @@ next_desc:
 	if (cleaned_count)
 		adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
 
+	adapter->total_rx_packets += total_rx_packets;
+	adapter->total_rx_bytes += total_rx_bytes;
 	return cleaned;
 }
 
@@ -4234,7 +4515,7 @@ e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
 		}
 
 		skb = netdev_alloc_skb(netdev,
-				       adapter->rx_ps_bsize0 + NET_IP_ALIGN);
+		                       adapter->rx_ps_bsize0 + NET_IP_ALIGN);
 
 		if (unlikely(!skb)) {
 			adapter->alloc_rx_buff_failed++;
@@ -4511,7 +4792,6 @@ e1000_read_pcie_cap_reg(struct e1000_hw *hw, uint32_t reg, uint16_t *value)
     return E1000_SUCCESS;
 }
 
-
 void
 e1000_io_write(struct e1000_hw *hw, unsigned long port, uint32_t value)
 {
@@ -4534,12 +4814,12 @@ e1000_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp)
 		E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
 
 		if (adapter->hw.mac_type != e1000_ich8lan) {
-		/* enable VLAN receive filtering */
-		rctl = E1000_READ_REG(&adapter->hw, RCTL);
-		rctl |= E1000_RCTL_VFE;
-		rctl &= ~E1000_RCTL_CFIEN;
-		E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
-		e1000_update_mng_vlan(adapter);
+			/* enable VLAN receive filtering */
+			rctl = E1000_READ_REG(&adapter->hw, RCTL);
+			rctl |= E1000_RCTL_VFE;
+			rctl &= ~E1000_RCTL_CFIEN;
+			E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
+			e1000_update_mng_vlan(adapter);
 		}
 	} else {
 		/* disable VLAN tag insert/strip */
@@ -4548,14 +4828,16 @@ e1000_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp)
 		E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
 
 		if (adapter->hw.mac_type != e1000_ich8lan) {
-		/* disable VLAN filtering */
-		rctl = E1000_READ_REG(&adapter->hw, RCTL);
-		rctl &= ~E1000_RCTL_VFE;
-		E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
-		if (adapter->mng_vlan_id != (uint16_t)E1000_MNG_VLAN_NONE) {
-			e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
-			adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
-		}
+			/* disable VLAN filtering */
+			rctl = E1000_READ_REG(&adapter->hw, RCTL);
+			rctl &= ~E1000_RCTL_VFE;
+			E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
+			if (adapter->mng_vlan_id !=
+			    (uint16_t)E1000_MNG_VLAN_NONE) {
+				e1000_vlan_rx_kill_vid(netdev,
+				                       adapter->mng_vlan_id);
+				adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
+			}
 		}
 	}
 
diff --git a/drivers/net/e1000/e1000_osdep.h b/drivers/net/e1000/e1000_osdep.h
index a464cb2..18afc0c 100644
--- a/drivers/net/e1000/e1000_osdep.h
+++ b/drivers/net/e1000/e1000_osdep.h
@@ -107,17 +107,16 @@ typedef enum {
 
 #define E1000_WRITE_FLUSH(a) E1000_READ_REG(a, STATUS)
 
-#define E1000_WRITE_ICH8_REG(a, reg, value) ( \
+#define E1000_WRITE_ICH_FLASH_REG(a, reg, value) ( \
     writel((value), ((a)->flash_address + reg)))
 
-#define E1000_READ_ICH8_REG(a, reg) ( \
+#define E1000_READ_ICH_FLASH_REG(a, reg) ( \
     readl((a)->flash_address + reg))
 
-#define E1000_WRITE_ICH8_REG16(a, reg, value) ( \
+#define E1000_WRITE_ICH_FLASH_REG16(a, reg, value) ( \
     writew((value), ((a)->flash_address + reg)))
 
-#define E1000_READ_ICH8_REG16(a, reg) ( \
+#define E1000_READ_ICH_FLASH_REG16(a, reg) ( \
     readw((a)->flash_address + reg))
 
-
 #endif /* _E1000_OSDEP_H_ */
diff --git a/drivers/net/e1000/e1000_param.c b/drivers/net/e1000/e1000_param.c
index 9c3c1ac..cbfcd7f 100644
--- a/drivers/net/e1000/e1000_param.c
+++ b/drivers/net/e1000/e1000_param.c
@@ -44,16 +44,6 @@
  */
 
 #define E1000_PARAM_INIT { [0 ... E1000_MAX_NIC] = OPTION_UNSET }
-/* Module Parameters are always initialized to -1, so that the driver
- * can tell the difference between no user specified value or the
- * user asking for the default value.
- * The true default values are loaded in when e1000_check_options is called.
- *
- * This is a GCC extension to ANSI C.
- * See the item "Labeled Elements in Initializers" in the section
- * "Extensions to the C Language Family" of the GCC documentation.
- */
-
 #define E1000_PARAM(X, desc) \
 	static int __devinitdata X[E1000_MAX_NIC+1] = E1000_PARAM_INIT; \
 	static int num_##X = 0; \
@@ -67,7 +57,6 @@
  *
  * Default Value: 256
  */
-
 E1000_PARAM(TxDescriptors, "Number of transmit descriptors");
 
 /* Receive Descriptor Count
@@ -77,7 +66,6 @@ E1000_PARAM(TxDescriptors, "Number of transmit descriptors");
  *
  * Default Value: 256
  */
-
 E1000_PARAM(RxDescriptors, "Number of receive descriptors");
 
 /* User Specified Speed Override
@@ -90,7 +78,6 @@ E1000_PARAM(RxDescriptors, "Number of receive descriptors");
  *
  * Default Value: 0
  */
-
 E1000_PARAM(Speed, "Speed setting");
 
 /* User Specified Duplex Override
@@ -102,7 +89,6 @@ E1000_PARAM(Speed, "Speed setting");
  *
  * Default Value: 0
  */
-
 E1000_PARAM(Duplex, "Duplex setting");
 
 /* Auto-negotiation Advertisement Override
@@ -119,8 +105,9 @@ E1000_PARAM(Duplex, "Duplex setting");
  *
  * Default Value: 0x2F (copper); 0x20 (fiber)
  */
-
 E1000_PARAM(AutoNeg, "Advertised auto-negotiation setting");
+#define AUTONEG_ADV_DEFAULT  0x2F
+#define AUTONEG_ADV_MASK     0x2F
 
 /* User Specified Flow Control Override
  *
@@ -132,8 +119,8 @@ E1000_PARAM(AutoNeg, "Advertised auto-negotiation setting");
  *
  * Default Value: Read flow control settings from the EEPROM
  */
-
 E1000_PARAM(FlowControl, "Flow Control setting");
+#define FLOW_CONTROL_DEFAULT FLOW_CONTROL_FULL
 
 /* XsumRX - Receive Checksum Offload Enable/Disable
  *
@@ -144,53 +131,54 @@ E1000_PARAM(FlowControl, "Flow Control setting");
  *
  * Default Value: 1
  */
-
 E1000_PARAM(XsumRX, "Disable or enable Receive Checksum offload");
 
 /* Transmit Interrupt Delay in units of 1.024 microseconds
+ *  Tx interrupt delay needs to typically be set to something non zero
  *
  * Valid Range: 0-65535
- *
- * Default Value: 64
  */
-
 E1000_PARAM(TxIntDelay, "Transmit Interrupt Delay");
+#define DEFAULT_TIDV                   8
+#define MAX_TXDELAY               0xFFFF
+#define MIN_TXDELAY                    0
 
 /* Transmit Absolute Interrupt Delay in units of 1.024 microseconds
  *
  * Valid Range: 0-65535
- *
- * Default Value: 0
  */
-
 E1000_PARAM(TxAbsIntDelay, "Transmit Absolute Interrupt Delay");
+#define DEFAULT_TADV                  32
+#define MAX_TXABSDELAY            0xFFFF
+#define MIN_TXABSDELAY                 0
 
 /* Receive Interrupt Delay in units of 1.024 microseconds
+ *   hardware will likely hang if you set this to anything but zero.
  *
  * Valid Range: 0-65535
- *
- * Default Value: 0
  */
-
 E1000_PARAM(RxIntDelay, "Receive Interrupt Delay");
+#define DEFAULT_RDTR                   0
+#define MAX_RXDELAY               0xFFFF
+#define MIN_RXDELAY                    0
 
 /* Receive Absolute Interrupt Delay in units of 1.024 microseconds
  *
  * Valid Range: 0-65535
- *
- * Default Value: 128
  */
-
 E1000_PARAM(RxAbsIntDelay, "Receive Absolute Interrupt Delay");
+#define DEFAULT_RADV                   8
+#define MAX_RXABSDELAY            0xFFFF
+#define MIN_RXABSDELAY                 0
 
 /* Interrupt Throttle Rate (interrupts/sec)
  *
- * Valid Range: 100-100000 (0=off, 1=dynamic)
- *
- * Default Value: 8000
+ * Valid Range: 100-100000 (0=off, 1=dynamic, 3=dynamic conservative)
  */
-
 E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate");
+#define DEFAULT_ITR                    3
+#define MAX_ITR                   100000
+#define MIN_ITR                      100
 
 /* Enable Smart Power Down of the PHY
  *
@@ -198,7 +186,6 @@ E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate");
  *
  * Default Value: 0 (disabled)
  */
-
 E1000_PARAM(SmartPowerDownEnable, "Enable PHY smart power down");
 
 /* Enable Kumeran Lock Loss workaround
@@ -207,33 +194,8 @@ E1000_PARAM(SmartPowerDownEnable, "Enable PHY smart power down");
  *
  * Default Value: 1 (enabled)
  */
-
 E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround");
 
-#define AUTONEG_ADV_DEFAULT  0x2F
-#define AUTONEG_ADV_MASK     0x2F
-#define FLOW_CONTROL_DEFAULT FLOW_CONTROL_FULL
-
-#define DEFAULT_RDTR                   0
-#define MAX_RXDELAY               0xFFFF
-#define MIN_RXDELAY                    0
-
-#define DEFAULT_RADV                 128
-#define MAX_RXABSDELAY            0xFFFF
-#define MIN_RXABSDELAY                 0
-
-#define DEFAULT_TIDV                  64
-#define MAX_TXDELAY               0xFFFF
-#define MIN_TXDELAY                    0
-
-#define DEFAULT_TADV                  64
-#define MAX_TXABSDELAY            0xFFFF
-#define MIN_TXABSDELAY                 0
-
-#define DEFAULT_ITR                 8000
-#define MAX_ITR                   100000
-#define MIN_ITR                      100
-
 struct e1000_option {
 	enum { enable_option, range_option, list_option } type;
 	char *name;
@@ -510,15 +472,27 @@ e1000_check_options(struct e1000_adapter *adapter)
 				break;
 			case 1:
 				DPRINTK(PROBE, INFO, "%s set to dynamic mode\n",
-				        opt.name);
+					opt.name);
+				adapter->itr_setting = adapter->itr;
+				adapter->itr = 20000;
+				break;
+			case 3:
+				DPRINTK(PROBE, INFO,
+				        "%s set to dynamic conservative mode\n",
+					opt.name);
+				adapter->itr_setting = adapter->itr;
+				adapter->itr = 20000;
 				break;
 			default:
 				e1000_validate_option(&adapter->itr, &opt,
-				                      adapter);
+				        adapter);
+				/* save the setting, because the dynamic bits change itr */
+				adapter->itr_setting = adapter->itr;
 				break;
 			}
 		} else {
-			adapter->itr = opt.def;
+			adapter->itr_setting = opt.def;
+			adapter->itr = 20000;
 		}
 	}
 	{ /* Smart Power Down */