summaryrefslogtreecommitdiffstats
path: root/drivers/net/e1000
diff options
context:
space:
mode:
authorMalli Chilakala <mallikarjuna.chilakala@intel.com>2005-04-28 19:38:30 -0700
committerJeff Garzik <jgarzik@pobox.com>2005-05-12 20:48:52 -0400
commite4eff7291c977308989b24fdfc7215a501302e6a (patch)
treec773bc7d11aaf8acf8928c801afc34561818bc53 /drivers/net/e1000
parent88d7bd8cb9eb8d64bf7997600b0d64f7834047c5 (diff)
downloadop-kernel-dev-e4eff7291c977308989b24fdfc7215a501302e6a.zip
op-kernel-dev-e4eff7291c977308989b24fdfc7215a501302e6a.tar.gz
[PATCH] e1000: made loopback test robust
Added enhanced functionality to the loopback diags to wrap the descriptor rings. Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com> diff -up net-drivers-2.6/drivers/net/e1000/e1000_ethtool.c net-drivers-2.6/drivers/net/e1000.new/e1000_ethtool.c
Diffstat (limited to 'drivers/net/e1000')
-rw-r--r--drivers/net/e1000/e1000_ethtool.c81
1 files changed, 58 insertions, 23 deletions
diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c
index 0a2ca7c..fae5854 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c
@@ -919,7 +919,8 @@ e1000_setup_desc_rings(struct e1000_adapter *adapter)
/* Setup Tx descriptor ring and Tx buffers */
- txdr->count = 80;
+ if(!txdr->count)
+ txdr->count = E1000_DEFAULT_TXD;
size = txdr->count * sizeof(struct e1000_buffer);
if(!(txdr->buffer_info = kmalloc(size, GFP_KERNEL))) {
@@ -974,7 +975,8 @@ e1000_setup_desc_rings(struct e1000_adapter *adapter)
/* Setup Rx descriptor ring and Rx buffers */
- rxdr->count = 80;
+ if(!rxdr->count)
+ rxdr->count = E1000_DEFAULT_RXD;
size = rxdr->count * sizeof(struct e1000_buffer);
if(!(rxdr->buffer_info = kmalloc(size, GFP_KERNEL))) {
@@ -1310,31 +1312,62 @@ e1000_run_loopback_test(struct e1000_adapter *adapter)
struct e1000_desc_ring *txdr = &adapter->test_tx_ring;
struct e1000_desc_ring *rxdr = &adapter->test_rx_ring;
struct pci_dev *pdev = adapter->pdev;
- int i, ret_val;
+ int i, j, k, l, lc, good_cnt, ret_val=0;
+ unsigned long time;
E1000_WRITE_REG(&adapter->hw, RDT, rxdr->count - 1);
- for(i = 0; i < 64; i++) {
- e1000_create_lbtest_frame(txdr->buffer_info[i].skb, 1024);
- pci_dma_sync_single_for_device(pdev, txdr->buffer_info[i].dma,
- txdr->buffer_info[i].length,
- PCI_DMA_TODEVICE);
- }
- E1000_WRITE_REG(&adapter->hw, TDT, i);
-
- msec_delay(200);
-
- i = 0;
- do {
- pci_dma_sync_single_for_cpu(pdev, rxdr->buffer_info[i].dma,
- rxdr->buffer_info[i].length,
- PCI_DMA_FROMDEVICE);
-
- ret_val = e1000_check_lbtest_frame(rxdr->buffer_info[i].skb,
- 1024);
- i++;
- } while (ret_val != 0 && i < 64);
+ /* Calculate the loop count based on the largest descriptor ring
+ * The idea is to wrap the largest ring a number of times using 64
+ * send/receive pairs during each loop
+ */
+ if(rxdr->count <= txdr->count)
+ lc = ((txdr->count / 64) * 2) + 1;
+ else
+ lc = ((rxdr->count / 64) * 2) + 1;
+
+ k = l = 0;
+ for(j = 0; j <= lc; j++) { /* loop count loop */
+ for(i = 0; i < 64; i++) { /* send the packets */
+ e1000_create_lbtest_frame(txdr->buffer_info[i].skb,
+ 1024);
+ pci_dma_sync_single_for_device(pdev,
+ txdr->buffer_info[k].dma,
+ txdr->buffer_info[k].length,
+ PCI_DMA_TODEVICE);
+ if(unlikely(++k == txdr->count)) k = 0;
+ }
+ E1000_WRITE_REG(&adapter->hw, TDT, k);
+ msec_delay(200);
+ time = jiffies; /* set the start time for the receive */
+ good_cnt = 0;
+ do { /* receive the sent packets */
+ pci_dma_sync_single_for_cpu(pdev,
+ rxdr->buffer_info[l].dma,
+ rxdr->buffer_info[l].length,
+ PCI_DMA_FROMDEVICE);
+
+ ret_val = e1000_check_lbtest_frame(
+ rxdr->buffer_info[l].skb,
+ 1024);
+ if(!ret_val)
+ good_cnt++;
+ if(unlikely(++l == rxdr->count)) l = 0;
+ /* time + 20 msecs (200 msecs on 2.4) is more than
+ * enough time to complete the receives, if it's
+ * exceeded, break and error off
+ */
+ } while (good_cnt < 64 && jiffies < (time + 20));
+ if(good_cnt != 64) {
+ ret_val = 13; /* ret_val is the same as mis-compare */
+ break;
+ }
+ if(jiffies >= (time + 2)) {
+ ret_val = 14; /* error code for time out error */
+ break;
+ }
+ } /* end loop count loop */
return ret_val;
}
@@ -1371,6 +1404,8 @@ e1000_link_test(struct e1000_adapter *adapter, uint64_t *data)
*data = 1;
} else {
e1000_check_for_link(&adapter->hw);
+ if(adapter->hw.autoneg) /* if auto_neg is set wait for it */
+ msec_delay(4000);
if(!(E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_LU)) {
*data = 1;
OpenPOWER on IntegriCloud