diff options
| author | Jesse Brandeburg <jesse.brandeburg@intel.com> | 2006-01-18 13:01:39 -0800 |
|---|---|---|
| committer | Jeff Garzik <jgarzik@pobox.com> | 2006-01-18 16:17:58 -0500 |
| commit | 96838a40f02950f4ff501f62a7e59ac4d508e8b7 (patch) | |
| tree | 9a86ecbe58a1d63159fc6c8c10223efa0344586d /drivers/net/e1000/e1000_hw.c | |
| parent | 6150f038158ad8ad4b74d6b76a67e2f68fd1d8e2 (diff) | |
| download | op-kernel-dev-96838a40f02950f4ff501f62a7e59ac4d508e8b7.zip op-kernel-dev-96838a40f02950f4ff501f62a7e59ac4d508e8b7.tar.gz | |
[PATCH] e1000: Fix whitespace
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Diffstat (limited to 'drivers/net/e1000/e1000_hw.c')
| -rw-r--r-- | drivers/net/e1000/e1000_hw.c | 18 |
1 files changed, 10 insertions, 8 deletions
diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c index 2437d36..beeec0f 100644 --- a/drivers/net/e1000/e1000_hw.c +++ b/drivers/net/e1000/e1000_hw.c @@ -1600,10 +1600,10 @@ e1000_phy_setup_autoneg(struct e1000_hw *hw) if(ret_val) return ret_val; - /* Read the MII 1000Base-T Control Register (Address 9). */ - ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &mii_1000t_ctrl_reg); - if(ret_val) - return ret_val; + /* Read the MII 1000Base-T Control Register (Address 9). */ + ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &mii_1000t_ctrl_reg); + if(ret_val) + return ret_val; /* Need to parse both autoneg_advertised and fc and set up * the appropriate PHY registers. First we will parse for @@ -3916,7 +3916,7 @@ e1000_read_eeprom(struct e1000_hw *hw, } } - if(eeprom->use_eerd == TRUE) { + if (eeprom->use_eerd == TRUE) { ret_val = e1000_read_eeprom_eerd(hw, offset, words, data); if ((e1000_is_onboard_nvm_eeprom(hw) == TRUE) || (hw->mac_type != e1000_82573)) @@ -4423,7 +4423,7 @@ e1000_commit_shadow_ram(struct e1000_hw *hw) return -E1000_ERR_EEPROM; } - /* If STM opcode located in bits 15:8 of flop, reset firmware */ + /* If STM opcode located in bits 15:8 of flop, reset firmware */ if ((flop & 0xFF00) == E1000_STM_OPCODE) { E1000_WRITE_REG(hw, HICR, E1000_HICR_FW_RESET); } @@ -4431,7 +4431,7 @@ e1000_commit_shadow_ram(struct e1000_hw *hw) /* Perform the flash update */ E1000_WRITE_REG(hw, EECD, eecd | E1000_EECD_FLUPD); - for (i=0; i < attempts; i++) { + for (i=0; i < attempts; i++) { eecd = E1000_READ_REG(hw, EECD); if ((eecd & E1000_EECD_FLUPD) == 0) { break; @@ -4504,6 +4504,7 @@ e1000_read_mac_addr(struct e1000_hw * hw) hw->perm_mac_addr[i] = (uint8_t) (eeprom_data & 0x00FF); hw->perm_mac_addr[i+1] = (uint8_t) (eeprom_data >> 8); } + switch (hw->mac_type) { default: break; @@ -6840,7 +6841,8 @@ int32_t e1000_check_phy_reset_block(struct e1000_hw *hw) { uint32_t manc = 0; - if(hw->mac_type > e1000_82547_rev_2) + + if (hw->mac_type > e1000_82547_rev_2) manc = E1000_READ_REG(hw, MANC); return (manc & E1000_MANC_BLK_PHY_RST_ON_IDE) ? E1000_BLK_PHY_RESET : E1000_SUCCESS; |
