diff options
author | Linus Walleij <linus.walleij@linaro.org> | 2015-12-21 09:36:21 +0100 |
---|---|---|
committer | Linus Walleij <linus.walleij@linaro.org> | 2015-12-21 09:36:21 +0100 |
commit | 0529357f102b96f68bc199f858d1c3b07f4b674c (patch) | |
tree | eaa047952a768099e00a5245afa0d84799df6990 /drivers/net/dsa/mv88e6060.c | |
parent | a9f1a3e4c1c7dc82711bc22dc52c7b0d6912ed56 (diff) | |
parent | 4ef7675344d687a0ef5b0d7c0cee12da005870c0 (diff) | |
download | op-kernel-dev-0529357f102b96f68bc199f858d1c3b07f4b674c.zip op-kernel-dev-0529357f102b96f68bc199f858d1c3b07f4b674c.tar.gz |
Merge tag 'v4.4-rc6' into devel
Linux 4.4-rc6
Diffstat (limited to 'drivers/net/dsa/mv88e6060.c')
-rw-r--r-- | drivers/net/dsa/mv88e6060.c | 114 |
1 files changed, 38 insertions, 76 deletions
diff --git a/drivers/net/dsa/mv88e6060.c b/drivers/net/dsa/mv88e6060.c index 9093577..0527f48 100644 --- a/drivers/net/dsa/mv88e6060.c +++ b/drivers/net/dsa/mv88e6060.c @@ -15,9 +15,7 @@ #include <linux/netdevice.h> #include <linux/phy.h> #include <net/dsa.h> - -#define REG_PORT(p) (8 + (p)) -#define REG_GLOBAL 0x0f +#include "mv88e6060.h" static int reg_read(struct dsa_switch *ds, int addr, int reg) { @@ -67,13 +65,14 @@ static char *mv88e6060_probe(struct device *host_dev, int sw_addr) if (bus == NULL) return NULL; - ret = mdiobus_read(bus, sw_addr + REG_PORT(0), 0x03); + ret = mdiobus_read(bus, sw_addr + REG_PORT(0), PORT_SWITCH_ID); if (ret >= 0) { - if (ret == 0x0600) + if (ret == PORT_SWITCH_ID_6060) return "Marvell 88E6060 (A0)"; - if (ret == 0x0601 || ret == 0x0602) + if (ret == PORT_SWITCH_ID_6060_R1 || + ret == PORT_SWITCH_ID_6060_R2) return "Marvell 88E6060 (B0)"; - if ((ret & 0xfff0) == 0x0600) + if ((ret & PORT_SWITCH_ID_6060_MASK) == PORT_SWITCH_ID_6060) return "Marvell 88E6060"; } @@ -87,22 +86,26 @@ static int mv88e6060_switch_reset(struct dsa_switch *ds) unsigned long timeout; /* Set all ports to the disabled state. */ - for (i = 0; i < 6; i++) { - ret = REG_READ(REG_PORT(i), 0x04); - REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc); + for (i = 0; i < MV88E6060_PORTS; i++) { + ret = REG_READ(REG_PORT(i), PORT_CONTROL); + REG_WRITE(REG_PORT(i), PORT_CONTROL, + ret & ~PORT_CONTROL_STATE_MASK); } /* Wait for transmit queues to drain. */ usleep_range(2000, 4000); /* Reset the switch. */ - REG_WRITE(REG_GLOBAL, 0x0a, 0xa130); + REG_WRITE(REG_GLOBAL, GLOBAL_ATU_CONTROL, + GLOBAL_ATU_CONTROL_SWRESET | + GLOBAL_ATU_CONTROL_ATUSIZE_1024 | + GLOBAL_ATU_CONTROL_ATE_AGE_5MIN); /* Wait up to one second for reset to complete. */ timeout = jiffies + 1 * HZ; while (time_before(jiffies, timeout)) { - ret = REG_READ(REG_GLOBAL, 0x00); - if ((ret & 0x8000) == 0x0000) + ret = REG_READ(REG_GLOBAL, GLOBAL_STATUS); + if (ret & GLOBAL_STATUS_INIT_READY) break; usleep_range(1000, 2000); @@ -119,13 +122,15 @@ static int mv88e6060_setup_global(struct dsa_switch *ds) * set the maximum frame size to 1536 bytes, and mask all * interrupt sources. */ - REG_WRITE(REG_GLOBAL, 0x04, 0x0800); + REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL, GLOBAL_CONTROL_MAX_FRAME_1536); /* Enable automatic address learning, set the address * database size to 1024 entries, and set the default aging * time to 5 minutes. */ - REG_WRITE(REG_GLOBAL, 0x0a, 0x2130); + REG_WRITE(REG_GLOBAL, GLOBAL_ATU_CONTROL, + GLOBAL_ATU_CONTROL_ATUSIZE_1024 | + GLOBAL_ATU_CONTROL_ATE_AGE_5MIN); return 0; } @@ -139,25 +144,30 @@ static int mv88e6060_setup_port(struct dsa_switch *ds, int p) * state to Forwarding. Additionally, if this is the CPU * port, enable Ingress and Egress Trailer tagging mode. */ - REG_WRITE(addr, 0x04, dsa_is_cpu_port(ds, p) ? 0x4103 : 0x0003); + REG_WRITE(addr, PORT_CONTROL, + dsa_is_cpu_port(ds, p) ? + PORT_CONTROL_TRAILER | + PORT_CONTROL_INGRESS_MODE | + PORT_CONTROL_STATE_FORWARDING : + PORT_CONTROL_STATE_FORWARDING); /* Port based VLAN map: give each port its own address * database, allow the CPU port to talk to each of the 'real' * ports, and allow each of the 'real' ports to only talk to * the CPU port. */ - REG_WRITE(addr, 0x06, - ((p & 0xf) << 12) | - (dsa_is_cpu_port(ds, p) ? - ds->phys_port_mask : - (1 << ds->dst->cpu_port))); + REG_WRITE(addr, PORT_VLAN_MAP, + ((p & 0xf) << PORT_VLAN_MAP_DBNUM_SHIFT) | + (dsa_is_cpu_port(ds, p) ? + ds->phys_port_mask : + BIT(ds->dst->cpu_port))); /* Port Association Vector: when learning source addresses * of packets, add the address to the address database using * a port bitmap that has only the bit for this port set and * the other bits clear. */ - REG_WRITE(addr, 0x0b, 1 << p); + REG_WRITE(addr, PORT_ASSOC_VECTOR, BIT(p)); return 0; } @@ -177,7 +187,7 @@ static int mv88e6060_setup(struct dsa_switch *ds) if (ret < 0) return ret; - for (i = 0; i < 6; i++) { + for (i = 0; i < MV88E6060_PORTS; i++) { ret = mv88e6060_setup_port(ds, i); if (ret < 0) return ret; @@ -188,16 +198,17 @@ static int mv88e6060_setup(struct dsa_switch *ds) static int mv88e6060_set_addr(struct dsa_switch *ds, u8 *addr) { - REG_WRITE(REG_GLOBAL, 0x01, (addr[0] << 8) | addr[1]); - REG_WRITE(REG_GLOBAL, 0x02, (addr[2] << 8) | addr[3]); - REG_WRITE(REG_GLOBAL, 0x03, (addr[4] << 8) | addr[5]); + /* Use the same MAC Address as FD Pause frames for all ports */ + REG_WRITE(REG_GLOBAL, GLOBAL_MAC_01, (addr[0] << 9) | addr[1]); + REG_WRITE(REG_GLOBAL, GLOBAL_MAC_23, (addr[2] << 8) | addr[3]); + REG_WRITE(REG_GLOBAL, GLOBAL_MAC_45, (addr[4] << 8) | addr[5]); return 0; } static int mv88e6060_port_to_phy_addr(int port) { - if (port >= 0 && port <= 5) + if (port >= 0 && port < MV88E6060_PORTS) return port; return -1; } @@ -225,54 +236,6 @@ mv88e6060_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val) return reg_write(ds, addr, regnum, val); } -static void mv88e6060_poll_link(struct dsa_switch *ds) -{ - int i; - - for (i = 0; i < DSA_MAX_PORTS; i++) { - struct net_device *dev; - int uninitialized_var(port_status); - int link; - int speed; - int duplex; - int fc; - - dev = ds->ports[i]; - if (dev == NULL) - continue; - - link = 0; - if (dev->flags & IFF_UP) { - port_status = reg_read(ds, REG_PORT(i), 0x00); - if (port_status < 0) - continue; - - link = !!(port_status & 0x1000); - } - - if (!link) { - if (netif_carrier_ok(dev)) { - netdev_info(dev, "link down\n"); - netif_carrier_off(dev); - } - continue; - } - - speed = (port_status & 0x0100) ? 100 : 10; - duplex = (port_status & 0x0200) ? 1 : 0; - fc = ((port_status & 0xc000) == 0xc000) ? 1 : 0; - - if (!netif_carrier_ok(dev)) { - netdev_info(dev, - "link up, %d Mb/s, %s duplex, flow control %sabled\n", - speed, - duplex ? "full" : "half", - fc ? "en" : "dis"); - netif_carrier_on(dev); - } - } -} - static struct dsa_switch_driver mv88e6060_switch_driver = { .tag_protocol = DSA_TAG_PROTO_TRAILER, .probe = mv88e6060_probe, @@ -280,7 +243,6 @@ static struct dsa_switch_driver mv88e6060_switch_driver = { .set_addr = mv88e6060_set_addr, .phy_read = mv88e6060_phy_read, .phy_write = mv88e6060_phy_write, - .poll_link = mv88e6060_poll_link, }; static int __init mv88e6060_init(void) |