summaryrefslogtreecommitdiffstats
path: root/drivers/net/dm9000.c
diff options
context:
space:
mode:
authorHenry Nestler <henry.nestler@gmail.com>2011-02-22 11:29:42 +0000
committerDavid S. Miller <davem@davemloft.net>2011-02-23 14:29:50 -0800
commit108f518cc4f81eb8e3b46a0bd5cb902ef90a51a8 (patch)
treee7b48499a74f577c006b4828ee3d140f93eab725 /drivers/net/dm9000.c
parent8dde924217fdf5b69f6cbbdca099d077ba269ad0 (diff)
downloadop-kernel-dev-108f518cc4f81eb8e3b46a0bd5cb902ef90a51a8.zip
op-kernel-dev-108f518cc4f81eb8e3b46a0bd5cb902ef90a51a8.tar.gz
DM9000B: Fix PHY power for network down/up
DM9000 revision B needs 1 ms delay after PHY power-on. PHY must be powered on by writing 0 into register DM9000_GPR before all other settings will change (see Davicom spec and example code). Remember, that register DM9000_GPR was not changed by reset sequence. Without this fix the FIFO is out of sync and sends wrong data after sequence of "ifconfig ethX down ; ifconfig ethX up". Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/dm9000.c')
-rw-r--r--drivers/net/dm9000.c7
1 files changed, 4 insertions, 3 deletions
diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c
index 2bbd496..461dd6f 100644
--- a/drivers/net/dm9000.c
+++ b/drivers/net/dm9000.c
@@ -802,10 +802,7 @@ dm9000_init_dm9000(struct net_device *dev)
/* Checksum mode */
dm9000_set_rx_csum_unlocked(dev, db->rx_csum);
- /* GPIO0 on pre-activate PHY */
- iow(db, DM9000_GPR, 0); /* REG_1F bit0 activate phyxcer */
iow(db, DM9000_GPCR, GPCR_GEP_CNTL); /* Let GPIO0 output */
- iow(db, DM9000_GPR, 0); /* Enable PHY */
ncr = (db->flags & DM9000_PLATF_EXT_PHY) ? NCR_EXT_PHY : 0;
@@ -1194,6 +1191,10 @@ dm9000_open(struct net_device *dev)
if (request_irq(dev->irq, dm9000_interrupt, irqflags, dev->name, dev))
return -EAGAIN;
+ /* GPIO0 on pre-activate PHY, Reg 1F is not set by reset */
+ iow(db, DM9000_GPR, 0); /* REG_1F bit0 activate phyxcer */
+ mdelay(1); /* delay needs by DM9000B */
+
/* Initialize DM9000 board */
dm9000_reset(db);
dm9000_init_dm9000(dev);
OpenPOWER on IntegriCloud