summaryrefslogtreecommitdiffstats
path: root/drivers/net/de620.h
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/net/de620.h
downloadop-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip
op-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/net/de620.h')
-rw-r--r--drivers/net/de620.h117
1 files changed, 117 insertions, 0 deletions
diff --git a/drivers/net/de620.h b/drivers/net/de620.h
new file mode 100644
index 0000000..e8d9a88
--- /dev/null
+++ b/drivers/net/de620.h
@@ -0,0 +1,117 @@
+/*********************************************************
+ * *
+ * Definition of D-Link DE-620 Ethernet Pocket adapter *
+ * *
+ *********************************************************/
+
+/* DE-620's CMD port Command */
+#define CS0 0x08 /* 1->0 command strobe */
+#define ICEN 0x04 /* 0=enable DL3520 host interface */
+#define DS0 0x02 /* 1->0 data strobe 0 */
+#define DS1 0x01 /* 1->0 data strobe 1 */
+
+#define WDIR 0x20 /* general 0=read 1=write */
+#define RDIR 0x00 /* (not 100% confirm ) */
+#define PS2WDIR 0x00 /* ps/2 mode 1=read, 0=write */
+#define PS2RDIR 0x20
+
+#define IRQEN 0x10 /* 1 = enable printer IRQ line */
+#define SELECTIN 0x08 /* 1 = select printer */
+#define INITP 0x04 /* 0 = initial printer */
+#define AUTOFEED 0x02 /* 1 = printer auto form feed */
+#define STROBE 0x01 /* 0->1 data strobe */
+
+#define RESET 0x08
+#define NIS0 0x20 /* 0 = BNC, 1 = UTP */
+#define NCTL0 0x10
+
+/* DE-620 DIC Command */
+#define W_DUMMY 0x00 /* DIC reserved command */
+#define W_CR 0x20 /* DIC write command register */
+#define W_NPR 0x40 /* DIC write Next Page Register */
+#define W_TBR 0x60 /* DIC write Tx Byte Count 1 reg */
+#define W_RSA 0x80 /* DIC write Remote Start Addr 1 */
+
+/* DE-620's STAT port bits 7-4 */
+#define EMPTY 0x80 /* 1 = receive buffer empty */
+#define INTLEVEL 0x40 /* 1 = interrupt level is high */
+#define TXBF1 0x20 /* 1 = transmit buffer 1 is in use */
+#define TXBF0 0x10 /* 1 = transmit buffer 0 is in use */
+#define READY 0x08 /* 1 = h/w ready to accept cmd/data */
+
+/* IDC 1 Command */
+#define W_RSA1 0xa0 /* write remote start address 1 */
+#define W_RSA0 0xa1 /* write remote start address 0 */
+#define W_NPRF 0xa2 /* write next page register NPR15-NPR8 */
+#define W_DFR 0xa3 /* write delay factor register */
+#define W_CPR 0xa4 /* write current page register */
+#define W_SPR 0xa5 /* write start page register */
+#define W_EPR 0xa6 /* write end page register */
+#define W_SCR 0xa7 /* write system configuration register */
+#define W_TCR 0xa8 /* write Transceiver Configuration reg */
+#define W_EIP 0xa9 /* write EEPM Interface port */
+#define W_PAR0 0xaa /* write physical address register 0 */
+#define W_PAR1 0xab /* write physical address register 1 */
+#define W_PAR2 0xac /* write physical address register 2 */
+#define W_PAR3 0xad /* write physical address register 3 */
+#define W_PAR4 0xae /* write physical address register 4 */
+#define W_PAR5 0xaf /* write physical address register 5 */
+
+/* IDC 2 Command */
+#define R_STS 0xc0 /* read status register */
+#define R_CPR 0xc1 /* read current page register */
+#define R_BPR 0xc2 /* read boundary page register */
+#define R_TDR 0xc3 /* read time domain reflectometry reg */
+
+/* STATUS Register */
+#define EEDI 0x80 /* EEPM DO pin */
+#define TXSUC 0x40 /* tx success */
+#define T16 0x20 /* tx fail 16 times */
+#define TS1 0x40 /* 0=Tx success, 1=T16 */
+#define TS0 0x20 /* 0=Tx success, 1=T16 */
+#define RXGOOD 0x10 /* rx a good packet */
+#define RXCRC 0x08 /* rx a CRC error packet */
+#define RXSHORT 0x04 /* rx a short packet */
+#define COLS 0x02 /* coaxial collision status */
+#define LNKS 0x01 /* UTP link status */
+
+/* Command Register */
+#define CLEAR 0x10 /* reset part of hardware */
+#define NOPER 0x08 /* No Operation */
+#define RNOP 0x08
+#define RRA 0x06 /* After RR then auto-advance NPR & BPR(=NPR-1) */
+#define RRN 0x04 /* Normal Remote Read mode */
+#define RW1 0x02 /* Remote Write tx buffer 1 ( page 6 - 11 ) */
+#define RW0 0x00 /* Remote Write tx buffer 0 ( page 0 - 5 ) */
+#define TXEN 0x01 /* 0->1 tx enable */
+
+/* System Configuration Register */
+#define TESTON 0x80 /* test host data transfer reliability */
+#define SLEEP 0x40 /* sleep mode */
+#if 0
+#define FASTMODE 0x04 /* fast mode for intel 82360SL fast mode */
+#define BYTEMODE 0x02 /* byte mode */
+#else
+#define FASTMODE 0x20 /* fast mode for intel 82360SL fast mode */
+#define BYTEMODE 0x10 /* byte mode */
+#endif
+#define NIBBLEMODE 0x00 /* nibble mode */
+#define IRQINV 0x08 /* turn off IRQ line inverter */
+#define IRQNML 0x00 /* turn on IRQ line inverter */
+#define INTON 0x04
+#define AUTOFFSET 0x02 /* auto shift address to TPR+12 */
+#define AUTOTX 0x01 /* auto tx when leave RW mode */
+
+/* Transceiver Configuration Register */
+#define JABBER 0x80 /* generate jabber condition */
+#define TXSUCINT 0x40 /* enable tx success interrupt */
+#define T16INT 0x20 /* enable T16 interrupt */
+#define RXERRPKT 0x10 /* accept CRC error or short packet */
+#define EXTERNALB2 0x0C /* external loopback 2 */
+#define EXTERNALB1 0x08 /* external loopback 1 */
+#define INTERNALB 0x04 /* internal loopback */
+#define NMLOPERATE 0x00 /* normal operation */
+#define RXPBM 0x03 /* rx physical, broadcast, multicast */
+#define RXPB 0x02 /* rx physical, broadcast */
+#define RXALL 0x01 /* rx all packet */
+#define RXOFF 0x00 /* rx disable */
OpenPOWER on IntegriCloud