diff options
author | Divy Le Ray <divy@chelsio.com> | 2008-10-08 17:39:31 -0700 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2008-10-08 17:39:31 -0700 |
commit | 9b1e36566c5fafbcc732c971acfcf8580332931a (patch) | |
tree | 2c779d712f07f0b097ad1a2041779597b7ca9bbc /drivers/net/cxgb3/t3_hw.c | |
parent | f231e0a5a2d01da40515c24f1daa689fe8cfd8d7 (diff) | |
download | op-kernel-dev-9b1e36566c5fafbcc732c971acfcf8580332931a.zip op-kernel-dev-9b1e36566c5fafbcc732c971acfcf8580332931a.tar.gz |
cxgb3: commnonize LASI phy code
Add generic code to manage interrupt driven PHYs.
Do not reset the phy after link parameters update,
the new values might get lost.
Return early from link change notification
when the link parameters remain unchanged.
Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/cxgb3/t3_hw.c')
-rw-r--r-- | drivers/net/cxgb3/t3_hw.c | 41 |
1 files changed, 36 insertions, 5 deletions
diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c index bfce761..58a3097 100644 --- a/drivers/net/cxgb3/t3_hw.c +++ b/drivers/net/cxgb3/t3_hw.c @@ -442,6 +442,33 @@ int t3_set_phy_speed_duplex(struct cphy *phy, int speed, int duplex) return mdio_write(phy, 0, MII_BMCR, ctl); } +int t3_phy_lasi_intr_enable(struct cphy *phy) +{ + return mdio_write(phy, MDIO_DEV_PMA_PMD, LASI_CTRL, 1); +} + +int t3_phy_lasi_intr_disable(struct cphy *phy) +{ + return mdio_write(phy, MDIO_DEV_PMA_PMD, LASI_CTRL, 0); +} + +int t3_phy_lasi_intr_clear(struct cphy *phy) +{ + u32 val; + + return mdio_read(phy, MDIO_DEV_PMA_PMD, LASI_STAT, &val); +} + +int t3_phy_lasi_intr_handler(struct cphy *phy) +{ + unsigned int status; + int err = mdio_read(phy, MDIO_DEV_PMA_PMD, LASI_STAT, &status); + + if (err) + return err; + return (status & 1) ? cphy_cause_link_change : 0; +} + static const struct adapter_info t3_adap_info[] = { {2, 0, F_GPIO2_OEN | F_GPIO4_OEN | @@ -1132,6 +1159,15 @@ void t3_link_changed(struct adapter *adapter, int port_id) phy->ops->get_link_status(phy, &link_ok, &speed, &duplex, &fc); + if (lc->requested_fc & PAUSE_AUTONEG) + fc &= lc->requested_fc; + else + fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX); + + if (link_ok == lc->link_ok && speed == lc->speed && + duplex == lc->duplex && fc == lc->fc) + return; /* nothing changed */ + if (link_ok != lc->link_ok && adapter->params.rev > 0 && uses_xaui(adapter)) { if (link_ok) @@ -1142,10 +1178,6 @@ void t3_link_changed(struct adapter *adapter, int port_id) lc->link_ok = link_ok; lc->speed = speed < 0 ? SPEED_INVALID : speed; lc->duplex = duplex < 0 ? DUPLEX_INVALID : duplex; - if (lc->requested_fc & PAUSE_AUTONEG) - fc &= lc->requested_fc; - else - fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX); if (link_ok && speed >= 0 && lc->autoneg == AUTONEG_ENABLE) { /* Set MAC speed, duplex, and flow control to match PHY. */ @@ -1191,7 +1223,6 @@ int t3_link_start(struct cphy *phy, struct cmac *mac, struct link_config *lc) fc); /* Also disables autoneg */ phy->ops->set_speed_duplex(phy, lc->speed, lc->duplex); - phy->ops->reset(phy, 0); } else phy->ops->autoneg_enable(phy); } else { |