cxgb3: manage private iSCSI IP address

The accelerated iSCSI traffic could use a private IP address unknown to the OS:
- The IP address is required in both drivers to manage ARP requests and connection set up.
- Added an control call to retrieve the ip address.
- Reply to ARP requests dedicated to the private IP address.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Karen Xie <kxie@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 64 insertions, 3 deletions

diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c
index 63eb974..6c641a8 100644
--- a/drivers/net/cxgb3/sge.c
+++ b/drivers/net/cxgb3/sge.c
@@ -36,6 +36,7 @@
 #include <linux/ip.h>
 #include <linux/tcp.h>
 #include <linux/dma-mapping.h>
+#include <net/arp.h>
 #include "common.h"
 #include "regs.h"
 #include "sge_defs.h"
@@ -1863,6 +1864,54 @@ static void restart_tx(struct sge_qset *qs)
 }
 
 /**
+ *	cxgb3_arp_process - process an ARP request probing a private IP address
+ *	@adapter: the adapter
+ *	@skb: the skbuff containing the ARP request
+ *
+ *	Check if the ARP request is probing the private IP address
+ *	dedicated to iSCSI, generate an ARP reply if so.
+ */
+static void cxgb3_arp_process(struct adapter *adapter, struct sk_buff *skb)
+{
+	struct net_device *dev = skb->dev;
+	struct port_info *pi;
+	struct arphdr *arp;
+	unsigned char *arp_ptr;
+	unsigned char *sha;
+	__be32 sip, tip;
+
+	if (!dev)
+		return;
+
+	skb_reset_network_header(skb);
+	arp = arp_hdr(skb);
+
+	if (arp->ar_op != htons(ARPOP_REQUEST))
+		return;
+
+	arp_ptr = (unsigned char *)(arp + 1);
+	sha = arp_ptr;
+	arp_ptr += dev->addr_len;
+	memcpy(&sip, arp_ptr, sizeof(sip));
+	arp_ptr += sizeof(sip);
+	arp_ptr += dev->addr_len;
+	memcpy(&tip, arp_ptr, sizeof(tip));
+
+	pi = netdev_priv(dev);
+	if (tip != pi->iscsi_ipv4addr)
+		return;
+
+	arp_send(ARPOP_REPLY, ETH_P_ARP, sip, dev, tip, sha,
+		 dev->dev_addr, sha);
+
+}
+
+static inline int is_arp(struct sk_buff *skb)
+{
+	return skb->protocol == htons(ETH_P_ARP);
+}
+
+/**
  *	rx_eth - process an ingress ethernet packet
  *	@adap: the adapter
  *	@rq: the response queue that received the packet
@@ -1885,7 +1934,7 @@ static void rx_eth(struct adapter *adap, struct sge_rspq *rq,
 	pi = netdev_priv(skb->dev);
 	if (pi->rx_csum_offload && p->csum_valid && p->csum == htons(0xffff) &&
 	    !p->fragment) {
-		rspq_to_qset(rq)->port_stats[SGE_PSTAT_RX_CSUM_GOOD]++;
+		qs->port_stats[SGE_PSTAT_RX_CSUM_GOOD]++;
 		skb->ip_summed = CHECKSUM_UNNECESSARY;
 	} else
 		skb->ip_summed = CHECKSUM_NONE;
@@ -1900,16 +1949,28 @@ static void rx_eth(struct adapter *adap, struct sge_rspq *rq,
 							     grp,
 							     ntohs(p->vlan),
 							     p);
-			else
+			else {
+				if (unlikely(pi->iscsi_ipv4addr &&
+				    is_arp(skb))) {
+					unsigned short vtag = ntohs(p->vlan) &
+								VLAN_VID_MASK;
+					skb->dev = vlan_group_get_device(grp,
+									 vtag);
+					cxgb3_arp_process(adap, skb);
+				}
 				__vlan_hwaccel_rx(skb, grp, ntohs(p->vlan),
 					  	  rq->polling);
+			}
 		else
 			dev_kfree_skb_any(skb);
 	} else if (rq->polling) {
 		if (lro)
 			lro_receive_skb(&qs->lro_mgr, skb, p);
-		else
+		else {
+			if (unlikely(pi->iscsi_ipv4addr && is_arp(skb)))
+				cxgb3_arp_process(adap, skb);
 			netif_receive_skb(skb);
+		}
 	} else
 		netif_rx(skb);
 }