Update Chelsio gige net driver.

- Use extern prefix for functions required.
- Removed a lot of wrappers, including t1_read/write_reg_4.
- Removed various macros, using native kernel calls now.
- Enumerated various #defines.
- Removed a lot of shared code which is not currently used in "NIC only" mode.
- Removed dead code.

Documentation/networking/cxgb.txt:
- Updated release notes for version 2.1.1

drivers/net/chelsio/ch_ethtool.h
- removed file, no longer using ETHTOOL namespace.

drivers/net/chelsio/common.h
- moved code from osdep.h to common.h
- added comment to #endif indicating which symbol it closes.

drivers/net/chelsio/cphy.h
- removed dead code.
- added comment to #endif indicating which symbol it closes.

drivers/net/chelsio/cxgb2.c
- use DMA_{32,64}BIT_MASK in include/linux/dma-mapping.h.
- removed unused code.
- use printk message for link info resembling drivers/net/mii.c.
- no longer using the MODULE_xxx namespace.
- no longer using "pci_" namespace.
- no longer using ETHTOOL namespace.

drivers/net/chelsio/cxgb2.h
- removed file, merged into common.h

drivers/net/chelsio/elmer0.h
- removed dead code.
- added various enums.
- added comment to #endif indicating which symbol it closes.

drivers/net/chelsio/espi.c
- removed various macros, using native kernel calls now.
- removed a lot of wrappers, including t1_read/write_reg_4.

drivers/net/chelsio/espi.h
- added comment to #endif indicating which symbol it closes.

drivers/net/chelsio/gmac.h
- added comment to #endif indicating which symbol it closes.

drivers/net/chelsio/mv88x201x.c
- changes to sync with Chelsio TOT.

drivers/net/chelsio/osdep.h
- removed file, consolidation. osdep was used to translate wrapper functions
  since our code supports multiple OSs. removed wrappers.

  drivers/net/chelsio/pm3393.c
  - removed various macros, using native kernel calls now.
  - removed a lot of wrappers, including t1_read/write_reg_4.
  - removed unused code.

  drivers/net/chelsio/regs.h
  - added a few register entries for future and current feature support.
  - added comment to #endif indicating which symbol it closes.

  drivers/net/chelsio/sge.c
  - rewrote large portion of scatter-gather engine to stabilize
  performance.
  - using u8/u16/u32 kernel types instead of __u8/__u16/__u32 compiler
  types.

  drivers/net/chelsio/sge.h
  - rewrote large portion of scatter-gather engine to stabilize
  performance.
  - added comment to #endif indicating which symbol it closes.

  drivers/net/chelsio/subr.c
  - merged tp.c into subr.c
  - removed various macros, using native kernel calls now.
  - removed a lot of wrappers, including t1_read/write_reg_4.
  - removed unused code.

  drivers/net/chelsio/suni1x10gexp_regs.h
  - modified copyright and authorship of file.
  - added comment to #endif indicating which symbol it closes.

  drivers/net/chelsio/tp.c
  - removed file, merged into subr.c.

  drivers/net/chelsio/tp.h
  - removed file.

  include/linux/pci_ids.h
  - patched to include PCI_VENDOR_ID_CHELSIO 0x1425, removed define from
  our code.

1 files changed, 64 insertions, 104 deletions

diff --git a/drivers/net/chelsio/espi.c b/drivers/net/chelsio/espi.c
index 7ec2dc7..2306425 100644
--- a/drivers/net/chelsio/espi.c
+++ b/drivers/net/chelsio/espi.c
@@ -1,8 +1,8 @@
 /*****************************************************************************
  *                                                                           *
  * File: espi.c                                                              *
- * $Revision: 1.9 $                                                          *
- * $Date: 2005/03/23 07:41:27 $                                              *
+ * $Revision: 1.14 $                                                         *
+ * $Date: 2005/05/14 00:59:32 $                                              *
  * Description:                                                              *
  *  Ethernet SPI functionality.                                              *
  *  part of the Chelsio 10Gb Ethernet Driver.                                *
@@ -63,15 +63,16 @@ static int tricn_write(adapter_t *adapter, int bundle_addr, int module_addr,
 {
 	int busy, attempts = TRICN_CMD_ATTEMPTS;
 
-	t1_write_reg_4(adapter, A_ESPI_CMD_ADDR, V_WRITE_DATA(wr_data) |
-		       V_REGISTER_OFFSET(reg_offset) |
-		       V_CHANNEL_ADDR(ch_addr) | V_MODULE_ADDR(module_addr) |
-		       V_BUNDLE_ADDR(bundle_addr) |
-		       V_SPI4_COMMAND(TRICN_CMD_WRITE));
-	t1_write_reg_4(adapter, A_ESPI_GOSTAT, 0);
+	writel(V_WRITE_DATA(wr_data) |
+	       V_REGISTER_OFFSET(reg_offset) |
+	       V_CHANNEL_ADDR(ch_addr) | V_MODULE_ADDR(module_addr) |
+	       V_BUNDLE_ADDR(bundle_addr) |
+	       V_SPI4_COMMAND(TRICN_CMD_WRITE),
+	       adapter->regs + A_ESPI_CMD_ADDR);
+	writel(0, adapter->regs + A_ESPI_GOSTAT);
 
 	do {
-		busy = t1_read_reg_4(adapter, A_ESPI_GOSTAT) & F_ESPI_CMD_BUSY;
+		busy = readl(adapter->regs + A_ESPI_GOSTAT) & F_ESPI_CMD_BUSY;
 	} while (busy && --attempts);
 
 	if (busy)
@@ -99,12 +100,12 @@ static int tricn_init(adapter_t *adapter)
 	/* 1 */
 	timeout=1000;
 	do {
-		stat = t1_read_reg_4(adapter, A_ESPI_RX_RESET);
+		stat = readl(adapter->regs + A_ESPI_RX_RESET);
 		is_ready = (stat & 0x4);
 		timeout--;
 		udelay(5);
 	} while (!is_ready || (timeout==0));
-	t1_write_reg_4(adapter, A_ESPI_RX_RESET, 0x2);
+	writel(0x2, adapter->regs + A_ESPI_RX_RESET);
 	if (timeout==0)
 	{
 		CH_ERR("ESPI : ERROR : Timeout tricn_init() \n");
@@ -127,14 +128,14 @@ static int tricn_init(adapter_t *adapter)
 	for (i=8; i<= 8; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xf1);
 
 	/* 3 */
-	t1_write_reg_4(adapter, A_ESPI_RX_RESET, 0x3);
+	writel(0x3, adapter->regs + A_ESPI_RX_RESET);
 
 	return 0;
 }
 
 void t1_espi_intr_enable(struct peespi *espi)
 {
-	u32 enable, pl_intr = t1_read_reg_4(espi->adapter, A_PL_ENABLE);
+	u32 enable, pl_intr = readl(espi->adapter->regs + A_PL_ENABLE);
 
 	/*
 	 * Cannot enable ESPI interrupts on T1B because HW asserts the
@@ -144,28 +145,28 @@ void t1_espi_intr_enable(struct peespi *espi)
 	 * cannot be cleared (HW bug).
 	 */
 	enable = t1_is_T1B(espi->adapter) ? 0 : ESPI_INTR_MASK;
-	t1_write_reg_4(espi->adapter, A_ESPI_INTR_ENABLE, enable);
-	t1_write_reg_4(espi->adapter, A_PL_ENABLE, pl_intr | F_PL_INTR_ESPI);
+	writel(enable, espi->adapter->regs + A_ESPI_INTR_ENABLE);
+	writel(pl_intr | F_PL_INTR_ESPI, espi->adapter->regs + A_PL_ENABLE);
 }
 
 void t1_espi_intr_clear(struct peespi *espi)
 {
-	t1_write_reg_4(espi->adapter, A_ESPI_INTR_STATUS, 0xffffffff);
-	t1_write_reg_4(espi->adapter, A_PL_CAUSE, F_PL_INTR_ESPI);
+	writel(0xffffffff, espi->adapter->regs + A_ESPI_INTR_STATUS);
+	writel(F_PL_INTR_ESPI, espi->adapter->regs + A_PL_CAUSE);
 }
 
 void t1_espi_intr_disable(struct peespi *espi)
 {
-	u32 pl_intr = t1_read_reg_4(espi->adapter, A_PL_ENABLE);
+	u32 pl_intr = readl(espi->adapter->regs + A_PL_ENABLE);
 
-	t1_write_reg_4(espi->adapter, A_ESPI_INTR_ENABLE, 0);
-	t1_write_reg_4(espi->adapter, A_PL_ENABLE, pl_intr & ~F_PL_INTR_ESPI);
+	writel(0, espi->adapter->regs + A_ESPI_INTR_ENABLE);
+	writel(pl_intr & ~F_PL_INTR_ESPI, espi->adapter->regs + A_PL_ENABLE);
 }
 
 int t1_espi_intr_handler(struct peespi *espi)
 {
 	u32 cnt;
-	u32 status = t1_read_reg_4(espi->adapter, A_ESPI_INTR_STATUS);
+	u32 status = readl(espi->adapter->regs + A_ESPI_INTR_STATUS);
 
 	if (status & F_DIP4ERR)
 		espi->intr_cnt.DIP4_err++;
@@ -184,7 +185,7 @@ int t1_espi_intr_handler(struct peespi *espi)
 		 * Must read the error count to clear the interrupt
 		 * that it causes.
 		 */
-		cnt = t1_read_reg_4(espi->adapter, A_ESPI_DIP2_ERR_COUNT);
+		cnt = readl(espi->adapter->regs + A_ESPI_DIP2_ERR_COUNT);
 	}
 
 	/*
@@ -193,68 +194,28 @@ int t1_espi_intr_handler(struct peespi *espi)
 	 */
 	if (status && t1_is_T1B(espi->adapter))
 		status = 1;
-	t1_write_reg_4(espi->adapter, A_ESPI_INTR_STATUS, status);
+	writel(status, espi->adapter->regs + A_ESPI_INTR_STATUS);
 	return 0;
 }
 
-static void espi_setup_for_pm3393(adapter_t *adapter)
+const struct espi_intr_counts *t1_espi_get_intr_counts(struct peespi *espi)
 {
-	u32 wmark = t1_is_T1B(adapter) ? 0x4000 : 0x3200;
-
-	t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN0, 0x1f4);
-	t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN1, 0x1f4);
-	t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN2, 0x1f4);
-	t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN3, 0x1f4);
-	t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK, 0x100);
-	t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK, wmark);
-	t1_write_reg_4(adapter, A_ESPI_CALENDAR_LENGTH, 3);
-	t1_write_reg_4(adapter, A_ESPI_TRAIN, 0x08000008);
-	t1_write_reg_4(adapter, A_PORT_CONFIG,
-		       V_RX_NPORTS(1) | V_TX_NPORTS(1));
+    return &espi->intr_cnt;
 }
 
-static void espi_setup_for_vsc7321(adapter_t *adapter)
+static void espi_setup_for_pm3393(adapter_t *adapter)
 {
 	u32 wmark = t1_is_T1B(adapter) ? 0x4000 : 0x3200;
 
-	t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN0, 0x1f4);
-	t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN1, 0x1f4);
-	t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN2, 0x1f4);
-	t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN3, 0x1f4);
-	t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK, 0x100);
-	t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK, wmark);
-	t1_write_reg_4(adapter, A_ESPI_CALENDAR_LENGTH, 3);
-	t1_write_reg_4(adapter, A_ESPI_TRAIN, 0x08000008);
-	t1_write_reg_4(adapter, A_PORT_CONFIG,
-		       V_RX_NPORTS(1) | V_TX_NPORTS(1));
-}
-
-/*
- * Note that T1B requires at least 2 ports for IXF1010 due to a HW bug.
- */
-static void espi_setup_for_ixf1010(adapter_t *adapter, int nports)
-{
-	t1_write_reg_4(adapter, A_ESPI_CALENDAR_LENGTH, 1);
-	if (nports == 4) {
-		if (is_T2(adapter)) {
-			t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK,
-				0xf00);
-			t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK,
-				0x3c0);
-		} else {
-			t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK,
-			       0x7ff);
-			t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK,
-			       0x1ff);
-		}
-	} else {
-		t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK,
-			       0x1fff);
-		t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK,
-			       0x7ff);
-	}
-	t1_write_reg_4(adapter, A_PORT_CONFIG,
-		       V_RX_NPORTS(nports) | V_TX_NPORTS(nports));
+	writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN0);
+	writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN1);
+	writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN2);
+	writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN3);
+	writel(0x100, adapter->regs + A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK);
+	writel(wmark, adapter->regs + A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK);
+	writel(3, adapter->regs + A_ESPI_CALENDAR_LENGTH);
+	writel(0x08000008, adapter->regs + A_ESPI_TRAIN);
+	writel(V_RX_NPORTS(1) | V_TX_NPORTS(1), adapter->regs + A_PORT_CONFIG);
 }
 
 /* T2 Init part --  */
@@ -263,43 +224,42 @@ static void espi_setup_for_ixf1010(adapter_t *adapter, int nports)
 /* 3. Init TriCN Hard Macro */
 int t1_espi_init(struct peespi *espi, int mac_type, int nports)
 {
+	u32 cnt;
+
 	u32 status_enable_extra = 0;
 	adapter_t *adapter = espi->adapter;
-	u32 cnt;
 	u32 status, burstval = 0x800100;
 
 	/* Disable ESPI training.  MACs that can handle it enable it below. */
-	t1_write_reg_4(adapter, A_ESPI_TRAIN, 0);
+	writel(0, adapter->regs + A_ESPI_TRAIN);
 
 	if (is_T2(adapter)) {
-		t1_write_reg_4(adapter, A_ESPI_MISC_CONTROL,
-			       V_OUT_OF_SYNC_COUNT(4) |
-			       V_DIP2_PARITY_ERR_THRES(3) | V_DIP4_THRES(1));
+		writel(V_OUT_OF_SYNC_COUNT(4) |
+		       V_DIP2_PARITY_ERR_THRES(3) |
+		       V_DIP4_THRES(1), adapter->regs + A_ESPI_MISC_CONTROL);
 		if (nports == 4) {
 			/* T204: maxburst1 = 0x40, maxburst2 = 0x20 */
 			burstval = 0x200040;
 		}
 	}
-	t1_write_reg_4(adapter, A_ESPI_MAXBURST1_MAXBURST2, burstval);
+	writel(burstval, adapter->regs + A_ESPI_MAXBURST1_MAXBURST2);
 
-	if (mac_type == CHBT_MAC_PM3393)
+	switch (mac_type) {
+	case CHBT_MAC_PM3393:
 		espi_setup_for_pm3393(adapter);
-	else if (mac_type == CHBT_MAC_VSC7321)
-		espi_setup_for_vsc7321(adapter);
-	else if (mac_type == CHBT_MAC_IXF1010) {
-		status_enable_extra = F_INTEL1010MODE;
-		espi_setup_for_ixf1010(adapter, nports);
-	} else
+		break;
+	default:
 		return -1;
+	}
 
 	/*
 	 * Make sure any pending interrupts from the SPI are
 	 * Cleared before enabling the interrupt.
 	 */
-	t1_write_reg_4(espi->adapter, A_ESPI_INTR_ENABLE, ESPI_INTR_MASK);
-	status = t1_read_reg_4(espi->adapter, A_ESPI_INTR_STATUS);
+	writel(ESPI_INTR_MASK, espi->adapter->regs + A_ESPI_INTR_ENABLE);
+	status = readl(espi->adapter->regs + A_ESPI_INTR_STATUS);
 	if (status & F_DIP2PARITYERR) {
-		cnt = t1_read_reg_4(espi->adapter, A_ESPI_DIP2_ERR_COUNT);
+		cnt = readl(espi->adapter->regs + A_ESPI_DIP2_ERR_COUNT);
 	}
 
 	/*
@@ -308,10 +268,10 @@ int t1_espi_init(struct peespi *espi, int mac_type, int nports)
 	 */
 	if (status && t1_is_T1B(espi->adapter))
 		status = 1;
-	t1_write_reg_4(espi->adapter, A_ESPI_INTR_STATUS, status);
+	writel(status, espi->adapter->regs + A_ESPI_INTR_STATUS);
 
-	t1_write_reg_4(adapter, A_ESPI_FIFO_STATUS_ENABLE,
-		       status_enable_extra | F_RXSTATUSENABLE);
+	writel(status_enable_extra | F_RXSTATUSENABLE,
+	       adapter->regs + A_ESPI_FIFO_STATUS_ENABLE);
 
 	if (is_T2(adapter)) {
 		tricn_init(adapter);
@@ -319,10 +279,10 @@ int t1_espi_init(struct peespi *espi, int mac_type, int nports)
 		 * Always position the control at the 1st port egress IN
 		 * (sop,eop) counter to reduce PIOs for T/N210 workaround.
 		 */
-		espi->misc_ctrl = (t1_read_reg_4(adapter, A_ESPI_MISC_CONTROL)
+		espi->misc_ctrl = (readl(adapter->regs + A_ESPI_MISC_CONTROL)
 				   & ~MON_MASK) | (F_MONITORED_DIRECTION
 				   | F_MONITORED_INTERFACE);
-		t1_write_reg_4(adapter, A_ESPI_MISC_CONTROL, espi->misc_ctrl);
+		writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL);
 		spin_lock_init(&espi->lock);
 	}
 
@@ -354,15 +314,16 @@ void t1_espi_set_misc_ctrl(adapter_t *adapter, u32 val)
 	spin_lock(&espi->lock);
 	espi->misc_ctrl = (val & ~MON_MASK) |
 			  (espi->misc_ctrl & MON_MASK);
-	t1_write_reg_4(adapter, A_ESPI_MISC_CONTROL, espi->misc_ctrl);
+	writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL);
 	spin_unlock(&espi->lock);
 }
 
 u32 t1_espi_get_mon(adapter_t *adapter, u32 addr, u8 wait)
 {
-	struct peespi *espi = adapter->espi;
 	u32 sel;
 
+	struct peespi *espi = adapter->espi;
+
 	if (!is_T2(adapter))
 		return 0;
 	sel = V_MONITORED_PORT_NUM((addr & 0x3c) >> 2);
@@ -373,14 +334,13 @@ u32 t1_espi_get_mon(adapter_t *adapter, u32 addr, u8 wait)
 	else
 		spin_lock(&espi->lock);
 	if ((sel != (espi->misc_ctrl & MON_MASK))) {
-		t1_write_reg_4(adapter, A_ESPI_MISC_CONTROL,
-			       ((espi->misc_ctrl & ~MON_MASK) | sel));
-		sel = t1_read_reg_4(adapter, A_ESPI_SCH_TOKEN3);
-		t1_write_reg_4(adapter, A_ESPI_MISC_CONTROL,
-			       espi->misc_ctrl);
+		writel(((espi->misc_ctrl & ~MON_MASK) | sel),
+		       adapter->regs + A_ESPI_MISC_CONTROL);
+		sel = readl(adapter->regs + A_ESPI_SCH_TOKEN3);
+		writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL);
 	}
 	else
-		sel = t1_read_reg_4(adapter, A_ESPI_SCH_TOKEN3);
+		sel = readl(adapter->regs + A_ESPI_SCH_TOKEN3);
 	spin_unlock(&espi->lock);
 	return sel;
 }