diff options
author | Andreas Gröger <andreas24groeger@gmail.com> | 2015-05-05 20:08:34 +0200 |
---|---|---|
committer | Marc Kleine-Budde <mkl@pengutronix.de> | 2015-05-06 08:03:20 +0200 |
commit | 844e0edf42d1847b974427b5597009f1de45496c (patch) | |
tree | 4d82aa63759b889d1dd41ac92eac7beb066aaad3 /drivers/net/can | |
parent | 0d1802ef8fea1eee9bec00319db33ab54202bb0a (diff) | |
download | op-kernel-dev-844e0edf42d1847b974427b5597009f1de45496c.zip op-kernel-dev-844e0edf42d1847b974427b5597009f1de45496c.tar.gz |
can: janz-ican3: add support for CAL/CANopen firmware
In our department we are using some older Janz ICAN3-modules in our dekstop
pcs. There we have slightly different carrier boards than the janz-cmodio
supported in the kernel sources, called CAN-PCI2 with two submodules. But the
pci configuration regions are identical. So extending the supported pci devices
to the corresponding device ids is sufficient to get the drivers working.
* The old ICAN3-modules with firmware 1.28 need more then 250ms for the restart
after reset. I've increased the timeout to 500ms.
* The janz_ican3 module uses the raw can services of the Janz-firmware, this
means firmware must be ICANOS/2. Our ICAN3-modules are equipped with
CAL/CANopen-firmware, so I must use the appropriate commands for the layer
management services.
Te driver detects the firmware after module reset and selects the commands
matching the firmware. This affects the bus on/off-command
(ican3_set_bus_state) and the configuration of the bittiming
(ican3_set_bittiming). For better diagnostics the detected firmware string is
presented as sysfs attribute (fwinfo).
Signed-off-by: Andreas Gröger <andreas24groeger@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Diffstat (limited to 'drivers/net/can')
-rw-r--r-- | drivers/net/can/janz-ican3.c | 125 |
1 files changed, 88 insertions, 37 deletions
diff --git a/drivers/net/can/janz-ican3.c b/drivers/net/can/janz-ican3.c index 4dd183a..c1e8536 100644 --- a/drivers/net/can/janz-ican3.c +++ b/drivers/net/can/janz-ican3.c @@ -40,6 +40,7 @@ #define MSYNC_PEER 0x00 /* ICAN only */ #define MSYNC_LOCL 0x01 /* host only */ #define TARGET_RUNNING 0x02 +#define FIRMWARE_STAMP 0x60 /* big endian firmware stamp */ #define MSYNC_RB0 0x01 #define MSYNC_RB1 0x02 @@ -83,6 +84,7 @@ #define MSG_COFFREQ 0x42 #define MSG_CONREQ 0x43 #define MSG_CCONFREQ 0x47 +#define MSG_LMTS 0xb4 /* * Janz ICAN3 CAN Inquiry Message Types @@ -165,6 +167,12 @@ /* SJA1000 Clock Input */ #define ICAN3_CAN_CLOCK 8000000 +/* Janz ICAN3 firmware types */ +enum ican3_fwtype { + ICAN3_FWTYPE_ICANOS, + ICAN3_FWTYPE_CAL_CANOPEN, +}; + /* Driver Name */ #define DRV_NAME "janz-ican3" @@ -215,6 +223,10 @@ struct ican3_dev { struct completion buserror_comp; struct can_berr_counter bec; + /* firmware type */ + enum ican3_fwtype fwtype; + char fwinfo[32]; + /* old and new style host interface */ unsigned int iftype; @@ -750,13 +762,61 @@ static int ican3_set_id_filter(struct ican3_dev *mod, bool accept) */ static int ican3_set_bus_state(struct ican3_dev *mod, bool on) { + struct can_bittiming *bt = &mod->can.bittiming; struct ican3_msg msg; + u8 btr0, btr1; + int res; - memset(&msg, 0, sizeof(msg)); - msg.spec = on ? MSG_CONREQ : MSG_COFFREQ; - msg.len = cpu_to_le16(0); + /* This algorithm was stolen from drivers/net/can/sja1000/sja1000.c */ + /* The bittiming register command for the ICAN3 just sets the bit timing */ + /* registers on the SJA1000 chip directly */ + btr0 = ((bt->brp - 1) & 0x3f) | (((bt->sjw - 1) & 0x3) << 6); + btr1 = ((bt->prop_seg + bt->phase_seg1 - 1) & 0xf) | + (((bt->phase_seg2 - 1) & 0x7) << 4); + if (mod->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES) + btr1 |= 0x80; - return ican3_send_msg(mod, &msg); + if (mod->fwtype == ICAN3_FWTYPE_ICANOS) { + if (on) { + /* set bittiming */ + memset(&msg, 0, sizeof(msg)); + msg.spec = MSG_CBTRREQ; + msg.len = cpu_to_le16(4); + msg.data[0] = 0x00; + msg.data[1] = 0x00; + msg.data[2] = btr0; + msg.data[3] = btr1; + + res = ican3_send_msg(mod, &msg); + if (res) + return res; + } + + /* can-on/off request */ + memset(&msg, 0, sizeof(msg)); + msg.spec = on ? MSG_CONREQ : MSG_COFFREQ; + msg.len = cpu_to_le16(0); + + return ican3_send_msg(mod, &msg); + + } else if (mod->fwtype == ICAN3_FWTYPE_CAL_CANOPEN) { + memset(&msg, 0, sizeof(msg)); + msg.spec = MSG_LMTS; + if (on) { + msg.len = cpu_to_le16(4); + msg.data[0] = 0; + msg.data[1] = 0; + msg.data[2] = btr0; + msg.data[3] = btr1; + } else { + msg.len = cpu_to_le16(2); + msg.data[0] = 1; + msg.data[1] = 0; + } + + return ican3_send_msg(mod, &msg); + } + return -ENOTSUPP; } static int ican3_set_termination(struct ican3_dev *mod, bool on) @@ -1402,7 +1462,7 @@ static int ican3_reset_module(struct ican3_dev *mod) return 0; msleep(10); - } while (time_before(jiffies, start + HZ / 4)); + } while (time_before(jiffies, start + HZ / 2)); netdev_err(mod->ndev, "failed to reset CAN module\n"); return -ETIMEDOUT; @@ -1427,6 +1487,17 @@ static int ican3_startup_module(struct ican3_dev *mod) return ret; } + /* detect firmware */ + memcpy_fromio(mod->fwinfo, mod->dpm + FIRMWARE_STAMP, sizeof(mod->fwinfo) - 1); + if (strncmp(mod->fwinfo, "JANZ-ICAN3", 10)) { + netdev_err(mod->ndev, "ICAN3 not detected (found %s)\n", mod->fwinfo); + return -ENODEV; + } + if (strstr(mod->fwinfo, "CAL/CANopen")) + mod->fwtype = ICAN3_FWTYPE_CAL_CANOPEN; + else + mod->fwtype = ICAN3_FWTYPE_ICANOS; + /* re-enable interrupts so we can send messages */ iowrite8(1 << mod->num, &mod->ctrl->int_enable); @@ -1615,36 +1686,6 @@ static const struct can_bittiming_const ican3_bittiming_const = { .brp_inc = 1, }; -/* - * This routine was stolen from drivers/net/can/sja1000/sja1000.c - * - * The bittiming register command for the ICAN3 just sets the bit timing - * registers on the SJA1000 chip directly - */ -static int ican3_set_bittiming(struct net_device *ndev) -{ - struct ican3_dev *mod = netdev_priv(ndev); - struct can_bittiming *bt = &mod->can.bittiming; - struct ican3_msg msg; - u8 btr0, btr1; - - btr0 = ((bt->brp - 1) & 0x3f) | (((bt->sjw - 1) & 0x3) << 6); - btr1 = ((bt->prop_seg + bt->phase_seg1 - 1) & 0xf) | - (((bt->phase_seg2 - 1) & 0x7) << 4); - if (mod->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES) - btr1 |= 0x80; - - memset(&msg, 0, sizeof(msg)); - msg.spec = MSG_CBTRREQ; - msg.len = cpu_to_le16(4); - msg.data[0] = 0x00; - msg.data[1] = 0x00; - msg.data[2] = btr0; - msg.data[3] = btr1; - - return ican3_send_msg(mod, &msg); -} - static int ican3_set_mode(struct net_device *ndev, enum can_mode mode) { struct ican3_dev *mod = netdev_priv(ndev); @@ -1730,11 +1771,22 @@ static ssize_t ican3_sysfs_set_term(struct device *dev, return count; } +static ssize_t ican3_sysfs_show_fwinfo(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct ican3_dev *mod = netdev_priv(to_net_dev(dev)); + + return scnprintf(buf, PAGE_SIZE, "%s\n", mod->fwinfo); +} + static DEVICE_ATTR(termination, S_IWUSR | S_IRUGO, ican3_sysfs_show_term, ican3_sysfs_set_term); +static DEVICE_ATTR(fwinfo, S_IRUSR | S_IRUGO, ican3_sysfs_show_fwinfo, NULL); static struct attribute *ican3_sysfs_attrs[] = { &dev_attr_termination.attr, + &dev_attr_fwinfo.attr, NULL, }; @@ -1794,7 +1846,6 @@ static int ican3_probe(struct platform_device *pdev) mod->can.clock.freq = ICAN3_CAN_CLOCK; mod->can.bittiming_const = &ican3_bittiming_const; - mod->can.do_set_bittiming = ican3_set_bittiming; mod->can.do_set_mode = ican3_set_mode; mod->can.do_get_berr_counter = ican3_get_berr_counter; mod->can.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES @@ -1866,7 +1917,7 @@ static int ican3_probe(struct platform_device *pdev) goto out_free_irq; } - dev_info(dev, "module %d: registered CAN device\n", pdata->modno); + netdev_info(mod->ndev, "module %d: registered CAN device\n", pdata->modno); return 0; out_free_irq: |