summaryrefslogtreecommitdiffstats
path: root/drivers/net/can
diff options
context:
space:
mode:
authorStephane Grosjean <s.grosjean@peak-system.com>2012-03-02 16:21:20 +0100
committerMarc Kleine-Budde <mkl@pengutronix.de>2012-03-03 17:40:46 +0100
commit2b61972b74219d21ef1e91178349bdb840357688 (patch)
tree301fe796580eb42a04e5176f323617c62e97cf24 /drivers/net/can
parente6d9c80b7ca1504411ad6d7acdb8683e4ae1c9cd (diff)
downloadop-kernel-dev-2b61972b74219d21ef1e91178349bdb840357688.zip
op-kernel-dev-2b61972b74219d21ef1e91178349bdb840357688.tar.gz
can: sja1000: add support for PEAK-System PCMCIA card
This patch adds support to the PCAN-PC Card PCMCIA card from PEAK-System Technik (www.peak-system.com). This card is a CAN interface for the PC Card slot. It is available as a single or dual-channel version. Tested-by: Oliver Hartkopp <socketcan@hartkopp.net> Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Diffstat (limited to 'drivers/net/can')
-rw-r--r--drivers/net/can/sja1000/Kconfig9
-rw-r--r--drivers/net/can/sja1000/Makefile1
-rw-r--r--drivers/net/can/sja1000/peak_pcmcia.c753
3 files changed, 763 insertions, 0 deletions
diff --git a/drivers/net/can/sja1000/Kconfig b/drivers/net/can/sja1000/Kconfig
index fdc3926..b60d6c5 100644
--- a/drivers/net/can/sja1000/Kconfig
+++ b/drivers/net/can/sja1000/Kconfig
@@ -43,6 +43,15 @@ config CAN_EMS_PCI
CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche
(http://www.ems-wuensche.de).
+config CAN_PEAK_PCMCIA
+ tristate "PEAK PCAN-PC Card"
+ depends on PCMCIA
+ ---help---
+ This driver is for the PCAN-PC Card PCMCIA adapter (1 or 2 channels)
+ from PEAK-System (http://www.peak-system.com). To compile this
+ driver as a module, choose M here: the module will be called
+ peak_pcmcia.
+
config CAN_PEAK_PCI
tristate "PEAK PCAN-PCI/PCIe/miniPCI Cards"
depends on PCI
diff --git a/drivers/net/can/sja1000/Makefile b/drivers/net/can/sja1000/Makefile
index 0604f24..b3d05cb 100644
--- a/drivers/net/can/sja1000/Makefile
+++ b/drivers/net/can/sja1000/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_CAN_SJA1000_OF_PLATFORM) += sja1000_of_platform.o
obj-$(CONFIG_CAN_EMS_PCMCIA) += ems_pcmcia.o
obj-$(CONFIG_CAN_EMS_PCI) += ems_pci.o
obj-$(CONFIG_CAN_KVASER_PCI) += kvaser_pci.o
+obj-$(CONFIG_CAN_PEAK_PCMCIA) += peak_pcmcia.o
obj-$(CONFIG_CAN_PEAK_PCI) += peak_pci.o
obj-$(CONFIG_CAN_PLX_PCI) += plx_pci.o
obj-$(CONFIG_CAN_TSCAN1) += tscan1.o
diff --git a/drivers/net/can/sja1000/peak_pcmcia.c b/drivers/net/can/sja1000/peak_pcmcia.c
new file mode 100644
index 0000000..ec6bd9d
--- /dev/null
+++ b/drivers/net/can/sja1000/peak_pcmcia.c
@@ -0,0 +1,753 @@
+/*
+ * Copyright (C) 2010-2012 Stephane Grosjean <s.grosjean@peak-system.com>
+ *
+ * CAN driver for PEAK-System PCAN-PC Card
+ * Derived from the PCAN project file driver/src/pcan_pccard.c
+ * Copyright (C) 2006-2010 PEAK System-Technik GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the version 2 of the GNU General Public License
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/netdevice.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/io.h>
+#include <pcmcia/cistpl.h>
+#include <pcmcia/ds.h>
+#include <linux/can.h>
+#include <linux/can/dev.h>
+#include "sja1000.h"
+
+MODULE_AUTHOR("Stephane Grosjean <s.grosjean@peak-system.com>");
+MODULE_DESCRIPTION("CAN driver for PEAK-System PCAN-PC Cards");
+MODULE_LICENSE("GPL v2");
+MODULE_SUPPORTED_DEVICE("PEAK PCAN-PC Card");
+
+/* PEAK-System PCMCIA driver name */
+#define PCC_NAME "peak_pcmcia"
+
+#define PCC_CHAN_MAX 2
+
+#define PCC_CAN_CLOCK (16000000 / 2)
+
+#define PCC_MANF_ID 0x0377
+#define PCC_CARD_ID 0x0001
+
+#define PCC_CHAN_SIZE 0x20
+#define PCC_CHAN_OFF(c) ((c) * PCC_CHAN_SIZE)
+#define PCC_COMN_OFF (PCC_CHAN_OFF(PCC_CHAN_MAX))
+#define PCC_COMN_SIZE 0x40
+
+/* common area registers */
+#define PCC_CCR 0x00
+#define PCC_CSR 0x02
+#define PCC_CPR 0x04
+#define PCC_SPI_DIR 0x06
+#define PCC_SPI_DOR 0x08
+#define PCC_SPI_ADR 0x0a
+#define PCC_SPI_IR 0x0c
+#define PCC_FW_MAJOR 0x10
+#define PCC_FW_MINOR 0x12
+
+/* CCR bits */
+#define PCC_CCR_CLK_16 0x00
+#define PCC_CCR_CLK_10 0x01
+#define PCC_CCR_CLK_21 0x02
+#define PCC_CCR_CLK_8 0x03
+#define PCC_CCR_CLK_MASK PCC_CCR_CLK_8
+
+#define PCC_CCR_RST_CHAN(c) (0x01 << ((c) + 2))
+#define PCC_CCR_RST_ALL (PCC_CCR_RST_CHAN(0) | PCC_CCR_RST_CHAN(1))
+#define PCC_CCR_RST_MASK PCC_CCR_RST_ALL
+
+/* led selection bits */
+#define PCC_LED(c) (1 << (c))
+#define PCC_LED_ALL (PCC_LED(0) | PCC_LED(1))
+
+/* led state value */
+#define PCC_LED_ON 0x00
+#define PCC_LED_FAST 0x01
+#define PCC_LED_SLOW 0x02
+#define PCC_LED_OFF 0x03
+
+#define PCC_CCR_LED_CHAN(s, c) ((s) << (((c) + 2) << 1))
+
+#define PCC_CCR_LED_ON_CHAN(c) PCC_CCR_LED_CHAN(PCC_LED_ON, c)
+#define PCC_CCR_LED_FAST_CHAN(c) PCC_CCR_LED_CHAN(PCC_LED_FAST, c)
+#define PCC_CCR_LED_SLOW_CHAN(c) PCC_CCR_LED_CHAN(PCC_LED_SLOW, c)
+#define PCC_CCR_LED_OFF_CHAN(c) PCC_CCR_LED_CHAN(PCC_LED_OFF, c)
+#define PCC_CCR_LED_MASK_CHAN(c) PCC_CCR_LED_OFF_CHAN(c)
+#define PCC_CCR_LED_OFF_ALL (PCC_CCR_LED_OFF_CHAN(0) | \
+ PCC_CCR_LED_OFF_CHAN(1))
+#define PCC_CCR_LED_MASK PCC_CCR_LED_OFF_ALL
+
+#define PCC_CCR_INIT (PCC_CCR_CLK_16 | PCC_CCR_RST_ALL | PCC_CCR_LED_OFF_ALL)
+
+/* CSR bits */
+#define PCC_CSR_SPI_BUSY 0x04
+
+/* time waiting for SPI busy (prevent from infinite loop) */
+#define PCC_SPI_MAX_BUSY_WAIT_MS 3
+
+/* max count of reading the SPI status register waiting for a change */
+/* (prevent from infinite loop) */
+#define PCC_WRITE_MAX_LOOP 1000
+
+/* max nb of int handled by that isr in one shot (prevent from infinite loop) */
+#define PCC_ISR_MAX_LOOP 10
+
+/* EEPROM chip instruction set */
+/* note: EEPROM Read/Write instructions include A8 bit */
+#define PCC_EEP_WRITE(a) (0x02 | (((a) & 0x100) >> 5))
+#define PCC_EEP_READ(a) (0x03 | (((a) & 0x100) >> 5))
+#define PCC_EEP_WRDI 0x04 /* EEPROM Write Disable */
+#define PCC_EEP_RDSR 0x05 /* EEPROM Read Status Register */
+#define PCC_EEP_WREN 0x06 /* EEPROM Write Enable */
+
+/* EEPROM Status Register bits */
+#define PCC_EEP_SR_WEN 0x02 /* EEPROM SR Write Enable bit */
+#define PCC_EEP_SR_WIP 0x01 /* EEPROM SR Write In Progress bit */
+
+/*
+ * The board configuration is probably following:
+ * RX1 is connected to ground.
+ * TX1 is not connected.
+ * CLKO is not connected.
+ * Setting the OCR register to 0xDA is a good idea.
+ * This means normal output mode, push-pull and the correct polarity.
+ */
+#define PCC_OCR (OCR_TX0_PUSHPULL | OCR_TX1_PUSHPULL)
+
+/*
+ * In the CDR register, you should set CBP to 1.
+ * You will probably also want to set the clock divider value to 7
+ * (meaning direct oscillator output) because the second SJA1000 chip
+ * is driven by the first one CLKOUT output.
+ */
+#define PCC_CDR (CDR_CBP | CDR_CLKOUT_MASK)
+
+struct pcan_channel {
+ struct net_device *netdev;
+ unsigned long prev_rx_bytes;
+ unsigned long prev_tx_bytes;
+};
+
+/* PCAN-PC Card private structure */
+struct pcan_pccard {
+ struct pcmcia_device *pdev;
+ int chan_count;
+ struct pcan_channel channel[PCC_CHAN_MAX];
+ u8 ccr;
+ u8 fw_major;
+ u8 fw_minor;
+ void __iomem *ioport_addr;
+ struct timer_list led_timer;
+};
+
+static struct pcmcia_device_id pcan_table[] = {
+ PCMCIA_DEVICE_MANF_CARD(PCC_MANF_ID, PCC_CARD_ID),
+ PCMCIA_DEVICE_NULL,
+};
+
+MODULE_DEVICE_TABLE(pcmcia, pcan_table);
+
+static void pcan_set_leds(struct pcan_pccard *card, u8 mask, u8 state);
+
+/*
+ * start timer which controls leds state
+ */
+static void pcan_start_led_timer(struct pcan_pccard *card)
+{
+ if (!timer_pending(&card->led_timer))
+ mod_timer(&card->led_timer, jiffies + HZ);
+}
+
+/*
+ * stop the timer which controls leds state
+ */
+static void pcan_stop_led_timer(struct pcan_pccard *card)
+{
+ del_timer_sync(&card->led_timer);
+}
+
+/*
+ * read a sja1000 register
+ */
+static u8 pcan_read_canreg(const struct sja1000_priv *priv, int port)
+{
+ return ioread8(priv->reg_base + port);
+}
+
+/*
+ * write a sja1000 register
+ */
+static void pcan_write_canreg(const struct sja1000_priv *priv, int port, u8 v)
+{
+ struct pcan_pccard *card = priv->priv;
+ int c = (priv->reg_base - card->ioport_addr) / PCC_CHAN_SIZE;
+
+ /* sja1000 register changes control the leds state */
+ if (port == REG_MOD)
+ switch (v) {
+ case MOD_RM:
+ /* Reset Mode: set led on */
+ pcan_set_leds(card, PCC_LED(c), PCC_LED_ON);
+ break;
+ case 0x00:
+ /* Normal Mode: led slow blinking and start led timer */
+ pcan_set_leds(card, PCC_LED(c), PCC_LED_SLOW);
+ pcan_start_led_timer(card);
+ break;
+ default:
+ break;
+ }
+
+ iowrite8(v, priv->reg_base + port);
+}
+
+/*
+ * read a register from the common area
+ */
+static u8 pcan_read_reg(struct pcan_pccard *card, int port)
+{
+ return ioread8(card->ioport_addr + PCC_COMN_OFF + port);
+}
+
+/*
+ * write a register into the common area
+ */
+static void pcan_write_reg(struct pcan_pccard *card, int port, u8 v)
+{
+ /* cache ccr value */
+ if (port == PCC_CCR) {
+ if (card->ccr == v)
+ return;
+ card->ccr = v;
+ }
+
+ iowrite8(v, card->ioport_addr + PCC_COMN_OFF + port);
+}
+
+/*
+ * check whether the card is present by checking its fw version numbers
+ * against values read at probing time.
+ */
+static inline int pcan_pccard_present(struct pcan_pccard *card)
+{
+ return ((pcan_read_reg(card, PCC_FW_MAJOR) == card->fw_major) &&
+ (pcan_read_reg(card, PCC_FW_MINOR) == card->fw_minor));
+}
+
+/*
+ * wait for SPI engine while it is busy
+ */
+static int pcan_wait_spi_busy(struct pcan_pccard *card)
+{
+ unsigned long timeout = jiffies +
+ msecs_to_jiffies(PCC_SPI_MAX_BUSY_WAIT_MS) + 1;
+
+ /* be sure to read status at least once after sleeping */
+ while (pcan_read_reg(card, PCC_CSR) & PCC_CSR_SPI_BUSY) {
+ if (time_after(jiffies, timeout))
+ return -EBUSY;
+ schedule();
+ }
+
+ return 0;
+}
+
+/*
+ * write data in device eeprom
+ */
+static int pcan_write_eeprom(struct pcan_pccard *card, u16 addr, u8 v)
+{
+ u8 status;
+ int err, i;
+
+ /* write instruction enabling write */
+ pcan_write_reg(card, PCC_SPI_IR, PCC_EEP_WREN);
+ err = pcan_wait_spi_busy(card);
+ if (err)
+ goto we_spi_err;
+
+ /* wait until write enabled */
+ for (i = 0; i < PCC_WRITE_MAX_LOOP; i++) {
+ /* write instruction reading the status register */
+ pcan_write_reg(card, PCC_SPI_IR, PCC_EEP_RDSR);
+ err = pcan_wait_spi_busy(card);
+ if (err)
+ goto we_spi_err;
+
+ /* get status register value and check write enable bit */
+ status = pcan_read_reg(card, PCC_SPI_DIR);
+ if (status & PCC_EEP_SR_WEN)
+ break;
+ }
+
+ if (i >= PCC_WRITE_MAX_LOOP) {
+ dev_err(&card->pdev->dev,
+ "stop waiting to be allowed to write in eeprom\n");
+ return -EIO;
+ }
+
+ /* set address and data */
+ pcan_write_reg(card, PCC_SPI_ADR, addr & 0xff);
+ pcan_write_reg(card, PCC_SPI_DOR, v);
+
+ /*
+ * write instruction with bit[3] set according to address value:
+ * if addr refers to upper half of the memory array: bit[3] = 1
+ */
+ pcan_write_reg(card, PCC_SPI_IR, PCC_EEP_WRITE(addr));
+ err = pcan_wait_spi_busy(card);
+ if (err)
+ goto we_spi_err;
+
+ /* wait while write in progress */
+ for (i = 0; i < PCC_WRITE_MAX_LOOP; i++) {
+ /* write instruction reading the status register */
+ pcan_write_reg(card, PCC_SPI_IR, PCC_EEP_RDSR);
+ err = pcan_wait_spi_busy(card);
+ if (err)
+ goto we_spi_err;
+
+ /* get status register value and check write in progress bit */
+ status = pcan_read_reg(card, PCC_SPI_DIR);
+ if (!(status & PCC_EEP_SR_WIP))
+ break;
+ }
+
+ if (i >= PCC_WRITE_MAX_LOOP) {
+ dev_err(&card->pdev->dev,
+ "stop waiting for write in eeprom to complete\n");
+ return -EIO;
+ }
+
+ /* write instruction disabling write */
+ pcan_write_reg(card, PCC_SPI_IR, PCC_EEP_WRDI);
+ err = pcan_wait_spi_busy(card);
+ if (err)
+ goto we_spi_err;
+
+ return 0;
+
+we_spi_err:
+ dev_err(&card->pdev->dev,
+ "stop waiting (spi engine always busy) err %d\n", err);
+
+ return err;
+}
+
+static void pcan_set_leds(struct pcan_pccard *card, u8 led_mask, u8 state)
+{
+ u8 ccr = card->ccr;
+ int i;
+
+ for (i = 0; i < card->chan_count; i++)
+ if (led_mask & PCC_LED(i)) {
+ /* clear corresponding led bits in ccr */
+ ccr &= ~PCC_CCR_LED_MASK_CHAN(i);
+ /* then set new bits */
+ ccr |= PCC_CCR_LED_CHAN(state, i);
+ }
+
+ /* real write only if something has changed in ccr */
+ pcan_write_reg(card, PCC_CCR, ccr);
+}
+
+/*
+ * enable/disable CAN connectors power
+ */
+static inline void pcan_set_can_power(struct pcan_pccard *card, int onoff)
+{
+ int err;
+
+ err = pcan_write_eeprom(card, 0, !!onoff);
+ if (err)
+ dev_err(&card->pdev->dev,
+ "failed setting power %s to can connectors (err %d)\n",
+ (onoff) ? "on" : "off", err);
+}
+
+/*
+ * set leds state according to channel activity
+ */
+static void pcan_led_timer(unsigned long arg)
+{
+ struct pcan_pccard *card = (struct pcan_pccard *)arg;
+ struct net_device *netdev;
+ int i, up_count = 0;
+ u8 ccr;
+
+ ccr = card->ccr;
+ for (i = 0; i < card->chan_count; i++) {
+ /* default is: not configured */
+ ccr &= ~PCC_CCR_LED_MASK_CHAN(i);
+ ccr |= PCC_CCR_LED_ON_CHAN(i);
+
+ netdev = card->channel[i].netdev;
+ if (!netdev || !(netdev->flags & IFF_UP))
+ continue;
+
+ up_count++;
+
+ /* no activity (but configured) */
+ ccr &= ~PCC_CCR_LED_MASK_CHAN(i);
+ ccr |= PCC_CCR_LED_SLOW_CHAN(i);
+
+ /* if bytes counters changed, set fast blinking led */
+ if (netdev->stats.rx_bytes != card->channel[i].prev_rx_bytes) {
+ card->channel[i].prev_rx_bytes = netdev->stats.rx_bytes;
+ ccr &= ~PCC_CCR_LED_MASK_CHAN(i);
+ ccr |= PCC_CCR_LED_FAST_CHAN(i);
+ }
+ if (netdev->stats.tx_bytes != card->channel[i].prev_tx_bytes) {
+ card->channel[i].prev_tx_bytes = netdev->stats.tx_bytes;
+ ccr &= ~PCC_CCR_LED_MASK_CHAN(i);
+ ccr |= PCC_CCR_LED_FAST_CHAN(i);
+ }
+ }
+
+ /* write the new leds state */
+ pcan_write_reg(card, PCC_CCR, ccr);
+
+ /* restart timer (except if no more configured channels) */
+ if (up_count)
+ mod_timer(&card->led_timer, jiffies + HZ);
+}
+
+/*
+ * interrupt service routine
+ */
+static irqreturn_t pcan_isr(int irq, void *dev_id)
+{
+ struct pcan_pccard *card = dev_id;
+ int irq_handled;
+
+ /* prevent from infinite loop */
+ for (irq_handled = 0; irq_handled < PCC_ISR_MAX_LOOP; irq_handled++) {
+ /* handle shared interrupt and next loop */
+ int nothing_to_handle = 1;
+ int i;
+
+ /* check interrupt for each channel */
+ for (i = 0; i < card->chan_count; i++) {
+ struct net_device *netdev;
+
+ /*
+ * check whether the card is present before calling
+ * sja1000_interrupt() to speed up hotplug detection
+ */
+ if (!pcan_pccard_present(card)) {
+ /* card unplugged during isr */
+ return IRQ_NONE;
+ }
+
+ /*
+ * should check whether all or SJA1000_MAX_IRQ
+ * interrupts have been handled: loop again to be sure.
+ */
+ netdev = card->channel[i].netdev;
+ if (netdev &&
+ sja1000_interrupt(irq, netdev) == IRQ_HANDLED)
+ nothing_to_handle = 0;
+ }
+
+ if (nothing_to_handle)
+ break;
+ }
+
+ return (irq_handled) ? IRQ_HANDLED : IRQ_NONE;
+}
+
+/*
+ * free all resources used by the channels and switch off leds and can power
+ */
+static void pcan_free_channels(struct pcan_pccard *card)
+{
+ int i;
+ u8 led_mask = 0;
+
+ for (i = 0; i < card->chan_count; i++) {
+ struct net_device *netdev;
+ char name[IFNAMSIZ];
+
+ led_mask |= PCC_LED(i);
+
+ netdev = card->channel[i].netdev;
+ if (!netdev)
+ continue;
+
+ strncpy(name, netdev->name, IFNAMSIZ);
+
+ unregister_sja1000dev(netdev);
+
+ free_sja1000dev(netdev);
+
+ dev_info(&card->pdev->dev, "%s removed\n", name);
+ }
+
+ /* do it only if device not removed */
+ if (pcan_pccard_present(card)) {
+ pcan_set_leds(card, led_mask, PCC_LED_OFF);
+ pcan_set_can_power(card, 0);
+ }
+}
+
+/*
+ * check if a CAN controller is present at the specified location
+ */
+static inline int pcan_channel_present(struct sja1000_priv *priv)
+{
+ /* make sure SJA1000 is in reset mode */
+ pcan_write_canreg(priv, REG_MOD, 1);
+ pcan_write_canreg(priv, REG_CDR, CDR_PELICAN);
+
+ /* read reset-values */
+ if (pcan_read_canreg(priv, REG_CDR) == CDR_PELICAN)
+ return 1;
+
+ return 0;
+}
+
+static int pcan_add_channels(struct pcan_pccard *card)
+{
+ struct pcmcia_device *pdev = card->pdev;
+ int i, err = 0;
+ u8 ccr = PCC_CCR_INIT;
+
+ /* init common registers (reset channels and leds off) */
+ card->ccr = ~ccr;
+ pcan_write_reg(card, PCC_CCR, ccr);
+
+ /* wait 2ms before unresetting channels */
+ mdelay(2);
+
+ ccr &= ~PCC_CCR_RST_ALL;
+ pcan_write_reg(card, PCC_CCR, ccr);
+
+ /* create one network device per channel detected */
+ for (i = 0; i < ARRAY_SIZE(card->channel); i++) {
+ struct net_device *netdev;
+ struct sja1000_priv *priv;
+
+ netdev = alloc_sja1000dev(0);
+ if (!netdev) {
+ err = -ENOMEM;
+ break;
+ }
+
+ /* update linkages */
+ priv = netdev_priv(netdev);
+ priv->priv = card;
+ SET_NETDEV_DEV(netdev, &pdev->dev);
+
+ priv->irq_flags = IRQF_SHARED;
+ netdev->irq = pdev->irq;
+ priv->reg_base = card->ioport_addr + PCC_CHAN_OFF(i);
+
+ /* check if channel is present */
+ if (!pcan_channel_present(priv)) {
+ dev_err(&pdev->dev, "channel %d not present\n", i);
+ free_sja1000dev(netdev);
+ continue;
+ }
+
+ priv->read_reg = pcan_read_canreg;
+ priv->write_reg = pcan_write_canreg;
+ priv->can.clock.freq = PCC_CAN_CLOCK;
+ priv->ocr = PCC_OCR;
+ priv->cdr = PCC_CDR;
+
+ /* Neither a slave device distributes the clock */
+ if (i > 0)
+ priv->cdr |= CDR_CLK_OFF;
+
+ priv->flags |= SJA1000_CUSTOM_IRQ_HANDLER;
+
+ /* register SJA1000 device */
+ err = register_sja1000dev(netdev);
+ if (err) {
+ free_sja1000dev(netdev);
+ continue;
+ }
+
+ card->channel[i].netdev = netdev;
+ card->chan_count++;
+
+ /* set corresponding led on in the new ccr */
+ ccr &= ~PCC_CCR_LED_OFF_CHAN(i);
+
+ dev_info(&pdev->dev,
+ "%s on channel %d at 0x%p irq %d\n",
+ netdev->name, i, priv->reg_base, pdev->irq);
+ }
+
+ /* write new ccr (change leds state) */
+ pcan_write_reg(card, PCC_CCR, ccr);
+
+ return err;
+}
+
+static int pcan_conf_check(struct pcmcia_device *pdev, void *priv_data)
+{
+ pdev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; /* only */
+ pdev->io_lines = 10;
+
+ /* This reserves IO space but doesn't actually enable it */
+ return pcmcia_request_io(pdev);
+}
+
+/*
+ * free all resources used by the device
+ */
+static void pcan_free(struct pcmcia_device *pdev)
+{
+ struct pcan_pccard *card = pdev->priv;
+
+ if (!card)
+ return;
+
+ free_irq(pdev->irq, card);
+ pcan_stop_led_timer(card);
+
+ pcan_free_channels(card);
+
+ ioport_unmap(card->ioport_addr);
+
+ kfree(card);
+ pdev->priv = NULL;
+}
+
+/*
+ * setup PCMCIA socket and probe for PEAK-System PC-CARD
+ */
+static int __devinit pcan_probe(struct pcmcia_device *pdev)
+{
+ struct pcan_pccard *card;
+ int err;
+
+ pdev->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
+
+ err = pcmcia_loop_config(pdev, pcan_conf_check, NULL);
+ if (err) {
+ dev_err(&pdev->dev, "pcmcia_loop_config() error %d\n", err);
+ goto probe_err_1;
+ }
+
+ if (!pdev->irq) {
+ dev_err(&pdev->dev, "no irq assigned\n");
+ err = -ENODEV;
+ goto probe_err_1;
+ }
+
+ err = pcmcia_enable_device(pdev);
+ if (err) {
+ dev_err(&pdev->dev, "pcmcia_enable_device failed err=%d\n",
+ err);
+ goto probe_err_1;
+ }
+
+ card = kzalloc(sizeof(struct pcan_pccard), GFP_KERNEL);
+ if (!card) {
+ dev_err(&pdev->dev, "couldn't allocate card memory\n");
+ err = -ENOMEM;
+ goto probe_err_2;
+ }
+
+ card->pdev = pdev;
+ pdev->priv = card;
+
+ /* sja1000 api uses iomem */
+ card->ioport_addr = ioport_map(pdev->resource[0]->start,
+ resource_size(pdev->resource[0]));
+ if (!card->ioport_addr) {
+ dev_err(&pdev->dev, "couldn't map io port into io memory\n");
+ err = -ENOMEM;
+ goto probe_err_3;
+ }
+ card->fw_major = pcan_read_reg(card, PCC_FW_MAJOR);
+ card->fw_minor = pcan_read_reg(card, PCC_FW_MINOR);
+
+ /* display board name and firware version */
+ dev_info(&pdev->dev, "PEAK-System pcmcia card %s fw %d.%d\n",
+ pdev->prod_id[1] ? pdev->prod_id[1] : "PCAN-PC Card",
+ card->fw_major, card->fw_minor);
+
+ /* detect available channels */
+ pcan_add_channels(card);
+ if (!card->chan_count)
+ goto probe_err_4;
+
+ /* init the timer which controls the leds */
+ init_timer(&card->led_timer);
+ card->led_timer.function = pcan_led_timer;
+ card->led_timer.data = (unsigned long)card;
+
+ /* request the given irq */
+ err = request_irq(pdev->irq, &pcan_isr, IRQF_SHARED, PCC_NAME, card);
+ if (err) {
+ dev_err(&pdev->dev, "couldn't request irq%d\n", pdev->irq);
+ goto probe_err_5;
+ }
+
+ /* power on the connectors */
+ pcan_set_can_power(card, 1);
+
+ return 0;
+
+probe_err_5:
+ /* unregister can devices from network */
+ pcan_free_channels(card);
+
+probe_err_4:
+ ioport_unmap(card->ioport_addr);
+
+probe_err_3:
+ kfree(card);
+ pdev->priv = NULL;
+
+probe_err_2:
+ pcmcia_disable_device(pdev);
+
+probe_err_1:
+ return err;
+}
+
+/*
+ * release claimed resources
+ */
+static void pcan_remove(struct pcmcia_device *pdev)
+{
+ pcan_free(pdev);
+ pcmcia_disable_device(pdev);
+}
+
+static struct pcmcia_driver pcan_driver = {
+ .name = PCC_NAME,
+ .probe = pcan_probe,
+ .remove = pcan_remove,
+ .id_table = pcan_table,
+};
+
+static int __init pcan_init(void)
+{
+ return pcmcia_register_driver(&pcan_driver);
+}
+module_init(pcan_init);
+
+static void __exit pcan_exit(void)
+{
+ pcmcia_unregister_driver(&pcan_driver);
+}
+module_exit(pcan_exit);
OpenPOWER on IntegriCloud