diff options
author | Ingo Molnar <mingo@elte.hu> | 2009-03-30 23:53:32 +0200 |
---|---|---|
committer | Ingo Molnar <mingo@elte.hu> | 2009-03-30 23:53:32 +0200 |
commit | 65fb0d23fcddd8697c871047b700c78817bdaa43 (patch) | |
tree | 119e6e5f276622c4c862f6c9b6d795264ba1603a /drivers/net/bnx2x_reg.h | |
parent | 8c083f081d0014057901c68a0a3e0f8ca7ac8d23 (diff) | |
parent | dfbbe89e197a77f2c8046a51c74e33e35f878080 (diff) | |
download | op-kernel-dev-65fb0d23fcddd8697c871047b700c78817bdaa43.zip op-kernel-dev-65fb0d23fcddd8697c871047b700c78817bdaa43.tar.gz |
Merge branch 'linus' into cpumask-for-linus
Conflicts:
arch/x86/kernel/cpu/common.c
Diffstat (limited to 'drivers/net/bnx2x_reg.h')
-rw-r--r-- | drivers/net/bnx2x_reg.h | 314 |
1 files changed, 310 insertions, 4 deletions
diff --git a/drivers/net/bnx2x_reg.h b/drivers/net/bnx2x_reg.h index d084e5f..b8ce6fc 100644 --- a/drivers/net/bnx2x_reg.h +++ b/drivers/net/bnx2x_reg.h @@ -30,8 +30,20 @@ address BRB1_IND_FREE_LIST_PRS_CRDT+1 initialize free tail. At address BRB1_IND_FREE_LIST_PRS_CRDT+2 initialize parser initial credit. */ #define BRB1_REG_FREE_LIST_PRS_CRDT 0x60200 +/* [RW 10] The number of free blocks above which the High_llfc signal to + interface #n is de-asserted. */ +#define BRB1_REG_HIGH_LLFC_HIGH_THRESHOLD_0 0x6014c +/* [RW 10] The number of free blocks below which the High_llfc signal to + interface #n is asserted. */ +#define BRB1_REG_HIGH_LLFC_LOW_THRESHOLD_0 0x6013c /* [RW 23] LL RAM data. */ #define BRB1_REG_LL_RAM 0x61000 +/* [RW 10] The number of free blocks above which the Low_llfc signal to + interface #n is de-asserted. */ +#define BRB1_REG_LOW_LLFC_HIGH_THRESHOLD_0 0x6016c +/* [RW 10] The number of free blocks below which the Low_llfc signal to + interface #n is asserted. */ +#define BRB1_REG_LOW_LLFC_LOW_THRESHOLD_0 0x6015c /* [R 24] The number of full blocks. */ #define BRB1_REG_NUM_OF_FULL_BLOCKS 0x60090 /* [ST 32] The number of cycles that the write_full signal towards MAC #0 @@ -125,6 +137,10 @@ stands for weight 8 (the most prioritised); 1 stands for weight 1(least prioritised); 2 stands for weight 2; tc. */ #define CCM_REG_CQM_P_WEIGHT 0xd00b8 +/* [RW 3] The weight of the QM (secondary) input in the WRR mechanism. 0 + stands for weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define CCM_REG_CQM_S_WEIGHT 0xd00bc /* [RW 1] Input SDM Interface enable. If 0 - the valid input is disregarded; acknowledge output is deasserted; all other signals are treated as usual; if 1 - normal activity. */ @@ -132,6 +148,10 @@ /* [RC 1] Set when the message length mismatch (relative to last indication) at the SDM interface is detected. */ #define CCM_REG_CSDM_LENGTH_MIS 0xd0170 +/* [RW 3] The weight of the SDM input in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define CCM_REG_CSDM_WEIGHT 0xd00b4 /* [RW 28] The CM header for QM formatting in case of an error in the QM inputs. */ #define CCM_REG_ERR_CCM_HDR 0xd0094 @@ -211,6 +231,11 @@ /* [RC 1] Set when the message length mismatch (relative to last indication) at the STORM interface is detected. */ #define CCM_REG_STORM_LENGTH_MIS 0xd016c +/* [RW 3] The weight of the STORM input in the WRR (Weighted Round robin) + mechanism. 0 stands for weight 8 (the most prioritised); 1 stands for + weight 1(least prioritised); 2 stands for weight 2 (more prioritised); + tc. */ +#define CCM_REG_STORM_WEIGHT 0xd009c /* [RW 1] Input tsem Interface enable. If 0 - the valid input is disregarded; acknowledge output is deasserted; all other signals are treated as usual; if 1 - normal activity. */ @@ -323,7 +348,11 @@ set one of these bits. the bit description can be found in CFC specifications */ #define CFC_REG_ERROR_VECTOR 0x10403c +/* [WB 93] LCID info ram access */ +#define CFC_REG_INFO_RAM 0x105000 +#define CFC_REG_INFO_RAM_SIZE 1024 #define CFC_REG_INIT_REG 0x10404c +#define CFC_REG_INTERFACES 0x104058 /* [RW 24] {weight_load_client7[2:0] to weight_load_client0[2:0]}. this field allows changing the priorities of the weighted-round-robin arbiter which selects which CFC load client should be served next */ @@ -337,8 +366,6 @@ #define CFC_REG_NUM_LCIDS_ALLOC 0x104020 /* [R 9] Number of Arriving LCIDs in Link List Block */ #define CFC_REG_NUM_LCIDS_ARRIVING 0x104004 -/* [R 9] Number of Inside LCIDs in Link List Block */ -#define CFC_REG_NUM_LCIDS_INSIDE 0x104008 /* [R 9] Number of Leaving LCIDs in Link List Block */ #define CFC_REG_NUM_LCIDS_LEAVING 0x104018 /* [RW 8] The event id for aggregated interrupt 0 */ @@ -730,6 +757,7 @@ #define DORQ_REG_SHRT_CMHEAD 0x170054 #define HC_CONFIG_0_REG_ATTN_BIT_EN_0 (0x1<<4) #define HC_CONFIG_0_REG_INT_LINE_EN_0 (0x1<<3) +#define HC_CONFIG_0_REG_MSI_ATTN_EN_0 (0x1<<7) #define HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 (0x1<<2) #define HC_CONFIG_0_REG_SINGLE_ISR_EN_0 (0x1<<1) #define HC_REG_AGG_INT_0 0x108050 @@ -1410,6 +1438,29 @@ This is the result value of the pin; not the drive value. Writing these bits will have not effect. */ #define MISC_REG_GPIO 0xa490 +/* [RW 8] These bits enable the GPIO_INTs to signals event to the + IGU/MCP.according to the following map: [0] p0_gpio_0; [1] p0_gpio_1; [2] + p0_gpio_2; [3] p0_gpio_3; [4] p1_gpio_0; [5] p1_gpio_1; [6] p1_gpio_2; + [7] p1_gpio_3; */ +#define MISC_REG_GPIO_EVENT_EN 0xa2bc +/* [RW 32] GPIO INT. [31-28] OLD_CLR port1; [27-24] OLD_CLR port0; Writing a + '1' to these bit clears the corresponding bit in the #OLD_VALUE register. + This will acknowledge an interrupt on the falling edge of corresponding + GPIO input (reset value 0). [23-16] OLD_SET [23-16] port1; OLD_SET port0; + Writing a '1' to these bit sets the corresponding bit in the #OLD_VALUE + register. This will acknowledge an interrupt on the rising edge of + corresponding SPIO input (reset value 0). [15-12] OLD_VALUE [11-8] port1; + OLD_VALUE port0; RO; These bits indicate the old value of the GPIO input + value. When the ~INT_STATE bit is set; this bit indicates the OLD value + of the pin such that if ~INT_STATE is set and this bit is '0'; then the + interrupt is due to a low to high edge. If ~INT_STATE is set and this bit + is '1'; then the interrupt is due to a high to low edge (reset value 0). + [7-4] INT_STATE port1; [3-0] INT_STATE RO port0; These bits indicate the + current GPIO interrupt state for each GPIO pin. This bit is cleared when + the appropriate #OLD_SET or #OLD_CLR command bit is written. This bit is + set when the GPIO input does not match the current value in #OLD_VALUE + (reset value 0). */ +#define MISC_REG_GPIO_INT 0xa494 /* [R 28] this field hold the last information that caused reserved attention. bits [19:0] - address; [22:20] function; [23] reserved; [27:24] the master that caused the attention - according to the following @@ -1554,6 +1605,14 @@ command bit is written. This bit is set when the SPIO input does not match the current value in #OLD_VALUE (reset value 0). */ #define MISC_REG_SPIO_INT 0xa500 +/* [RW 32] reload value for counter 4 if reload; the value will be reload if + the counter reached zero and the reload bit + (~misc_registers_sw_timer_cfg_4.sw_timer_cfg_4[1] ) is set */ +#define MISC_REG_SW_TIMER_RELOAD_VAL_4 0xa2fc +/* [RW 32] the value of the counter for sw timers1-8. there are 8 addresses + in this register. addres 0 - timer 1; address - timer 2�address 7 - + timer 8 */ +#define MISC_REG_SW_TIMER_VAL 0xa5c0 /* [RW 1] Set by the MCP to remember if one or more of the drivers is/are loaded; 0-prepare; -unprepare */ #define MISC_REG_UNPREPARED 0xa424 @@ -1660,6 +1719,19 @@ /* [RW 4] led mode for port0: 0 MAC; 1-3 PHY1; 4 MAC2; 5-7 PHY4; 8-MAC3; 9-11PHY7; 12 MAC4; 13-15 PHY10; */ #define NIG_REG_LED_MODE_P0 0x102f0 +/* [RW 3] for port0 enable for llfc ppp and pause. b0 - brb1 enable; b1- + tsdm enable; b2- usdm enable */ +#define NIG_REG_LLFC_EGRESS_SRC_ENABLE_0 0x16070 +/* [RW 1] SAFC enable for port0. This register may get 1 only when + ~ppp_enable.ppp_enable = 0 and pause_enable.pause_enable =0 for the same + port */ +#define NIG_REG_LLFC_ENABLE_0 0x16208 +/* [RW 16] classes are high-priority for port0 */ +#define NIG_REG_LLFC_HIGH_PRIORITY_CLASSES_0 0x16058 +/* [RW 16] classes are low-priority for port0 */ +#define NIG_REG_LLFC_LOW_PRIORITY_CLASSES_0 0x16060 +/* [RW 1] Output enable of message to LLFC BMAC IF for port0 */ +#define NIG_REG_LLFC_OUT_EN_0 0x160c8 #define NIG_REG_LLH0_ACPI_PAT_0_CRC 0x1015c #define NIG_REG_LLH0_ACPI_PAT_6_LEN 0x10154 #define NIG_REG_LLH0_BRB1_DRV_MASK 0x10244 @@ -1730,6 +1802,10 @@ #define NIG_REG_NIG_INT_STS_1 0x103c0 /* [R 32] Parity register #0 read */ #define NIG_REG_NIG_PRTY_STS 0x103d0 +/* [RW 1] Pause enable for port0. This register may get 1 only when + ~safc_enable.safc_enable = 0 and ppp_enable.ppp_enable =0 for the same + port */ +#define NIG_REG_PAUSE_ENABLE_0 0x160c0 /* [RW 1] Input enable for RX PBF LP IF */ #define NIG_REG_PBF_LB_IN_EN 0x100b4 /* [RW 1] Value of this register will be transmitted to port swap when @@ -1739,6 +1815,10 @@ #define NIG_REG_PRS_EOP_OUT_EN 0x10104 /* [RW 1] Input enable for RX parser request IF */ #define NIG_REG_PRS_REQ_IN_EN 0x100b8 +/* [RW 5] control to serdes - CL45 DEVAD */ +#define NIG_REG_SERDES0_CTRL_MD_DEVAD 0x10370 +/* [RW 1] control to serdes; 0 - clause 45; 1 - clause 22 */ +#define NIG_REG_SERDES0_CTRL_MD_ST 0x1036c /* [RW 5] control to serdes - CL22 PHY_ADD and CL45 PRTAD */ #define NIG_REG_SERDES0_CTRL_PHY_ADDR 0x10374 /* [R 1] status from serdes0 that inputs to interrupt logic of link status */ @@ -1885,6 +1965,7 @@ #define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_2 0x400e4 #define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_3 0x400e8 #define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_4 0x400ec +#define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_5 0x400f0 /* [RW 32] The CM header for flush message where 'load existed' bit in CFC load response is set and packet type is 0. Used in packet start message to TCM. */ @@ -1893,6 +1974,7 @@ #define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_2 0x400c4 #define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_3 0x400c8 #define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_4 0x400cc +#define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_5 0x400d0 /* [RW 32] The CM header for a match and packet type 1 for loopback port. Used in packet start message to TCM. */ #define PRS_REG_CM_HDR_LOOPBACK_TYPE_1 0x4009c @@ -2035,6 +2117,19 @@ #define PXP2_REG_PGL_INT_XSDM_5 0x1204e8 #define PXP2_REG_PGL_INT_XSDM_6 0x1204ec #define PXP2_REG_PGL_INT_XSDM_7 0x1204f0 +/* [RW 3] this field allows one function to pretend being another function + when accessing any BAR mapped resource within the device. the value of + the field is the number of the function that will be accessed + effectively. after software write to this bit it must read it in order to + know that the new value is updated */ +#define PXP2_REG_PGL_PRETEND_FUNC_F0 0x120674 +#define PXP2_REG_PGL_PRETEND_FUNC_F1 0x120678 +#define PXP2_REG_PGL_PRETEND_FUNC_F2 0x12067c +#define PXP2_REG_PGL_PRETEND_FUNC_F3 0x120680 +#define PXP2_REG_PGL_PRETEND_FUNC_F4 0x120684 +#define PXP2_REG_PGL_PRETEND_FUNC_F5 0x120688 +#define PXP2_REG_PGL_PRETEND_FUNC_F6 0x12068c +#define PXP2_REG_PGL_PRETEND_FUNC_F7 0x120690 /* [R 1] this bit indicates that a read request was blocked because of bus_master_en was deasserted */ #define PXP2_REG_PGL_READ_BLOCKED 0x120568 @@ -2498,6 +2593,11 @@ considered zero so practically there are only 20 bits in this register; queues 63-0 */ #define QM_REG_BASEADDR 0x168900 +/* [RW 32] The base logical address (in bytes) of each physical queue. The + index I represents the physical queue number. The 12 lsbs are ignore and + considered zero so practically there are only 20 bits in this register; + queues 127-64 */ +#define QM_REG_BASEADDR_EXT_A 0x16e100 /* [RW 16] The byte credit cost for each task. This value is for both ports */ #define QM_REG_BYTECRDCOST 0x168234 /* [RW 16] The initial byte credit value for both ports. */ @@ -3438,6 +3538,16 @@ #define SRC_REG_KEYRSS0_0 0x40408 #define SRC_REG_KEYRSS0_7 0x40424 #define SRC_REG_KEYRSS1_9 0x40454 +#define SRC_REG_KEYSEARCH_0 0x40458 +#define SRC_REG_KEYSEARCH_1 0x4045c +#define SRC_REG_KEYSEARCH_2 0x40460 +#define SRC_REG_KEYSEARCH_3 0x40464 +#define SRC_REG_KEYSEARCH_4 0x40468 +#define SRC_REG_KEYSEARCH_5 0x4046c +#define SRC_REG_KEYSEARCH_6 0x40470 +#define SRC_REG_KEYSEARCH_7 0x40474 +#define SRC_REG_KEYSEARCH_8 0x40478 +#define SRC_REG_KEYSEARCH_9 0x4047c #define SRC_REG_LASTFREE0 0x40530 #define SRC_REG_NUMBER_HASH_BITS0 0x40400 /* [RW 1] Reset internal state machines. */ @@ -3481,6 +3591,10 @@ /* [RC 1] Message length mismatch (relative to last indication) at the In#9 interface. */ #define TCM_REG_CSEM_LENGTH_MIS 0x50174 +/* [RW 3] The weight of the input csem in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define TCM_REG_CSEM_WEIGHT 0x500bc /* [RW 8] The Event ID in case of ErrorFlg is set in the input message. */ #define TCM_REG_ERR_EVNT_ID 0x500a0 /* [RW 28] The CM erroneous header for QM and Timers formatting. */ @@ -3524,6 +3638,7 @@ #define TCM_REG_N_SM_CTX_LD_2 0x50058 #define TCM_REG_N_SM_CTX_LD_3 0x5005c #define TCM_REG_N_SM_CTX_LD_4 0x50060 +#define TCM_REG_N_SM_CTX_LD_5 0x50064 /* [RW 1] Input pbf Interface enable. If 0 - the valid input is disregarded; acknowledge output is deasserted; all other signals are treated as usual; if 1 - normal activity. */ @@ -3563,6 +3678,10 @@ disregarded; acknowledge output is deasserted; all other signals are treated as usual; if 1 - normal activity. */ #define TCM_REG_STORM_TCM_IFEN 0x50010 +/* [RW 3] The weight of the STORM input in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define TCM_REG_STORM_WEIGHT 0x500ac /* [RW 1] CM - CFC Interface enable. If 0 - the valid input is disregarded; acknowledge output is deasserted; all other signals are treated as usual; if 1 - normal activity. */ @@ -3598,10 +3717,22 @@ disregarded; acknowledge output is deasserted; all other signals are treated as usual; if 1 - normal activity. */ #define TCM_REG_TM_TCM_IFEN 0x5001c +/* [RW 3] The weight of the Timers input in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define TCM_REG_TM_WEIGHT 0x500d0 /* [RW 6] QM output initial credit. Max credit available - 32.Write writes the initial credit value; read returns the current value of the credit counter. Must be initialized to 32 at start-up. */ #define TCM_REG_TQM_INIT_CRD 0x5021c +/* [RW 3] The weight of the QM (primary) input in the WRR mechanism. 0 + stands for weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define TCM_REG_TQM_P_WEIGHT 0x500c8 +/* [RW 3] The weight of the QM (secondary) input in the WRR mechanism. 0 + stands for weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define TCM_REG_TQM_S_WEIGHT 0x500cc /* [RW 28] The CM header value for QM request (primary). */ #define TCM_REG_TQM_TCM_HDR_P 0x50090 /* [RW 28] The CM header value for QM request (secondary). */ @@ -3628,6 +3759,10 @@ /* [RC 1] Message length mismatch (relative to last indication) at the In#8 interface. */ #define TCM_REG_USEM_LENGTH_MIS 0x50170 +/* [RW 3] The weight of the input usem in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define TCM_REG_USEM_WEIGHT 0x500b8 /* [RW 21] Indirect access to the descriptor table of the XX protection mechanism. The fields are: [5:0] - length of the message; 15:6] - message pointer; 20:16] - next pointer. */ @@ -3677,6 +3812,7 @@ #define TM_REG_EN_CL1_INPUT 0x16400c /* [RW 1] Enable client2 input. */ #define TM_REG_EN_CL2_INPUT 0x164010 +#define TM_REG_EN_LINEAR0_TIMER 0x164014 /* [RW 1] Enable real time counter. */ #define TM_REG_EN_REAL_TIME_CNT 0x1640d8 /* [RW 1] Enable for Timers state machines. */ @@ -3684,14 +3820,22 @@ /* [RW 4] Load value for expiration credit cnt. CFC max number of outstanding load requests for timers (expiration) context loading. */ #define TM_REG_EXP_CRDCNT_VAL 0x164238 +/* [RW 32] Linear0 logic address. */ +#define TM_REG_LIN0_LOGIC_ADDR 0x164240 /* [RW 18] Linear0 Max active cid (in banks of 32 entries). */ #define TM_REG_LIN0_MAX_ACTIVE_CID 0x164048 /* [WB 64] Linear0 phy address. */ #define TM_REG_LIN0_PHY_ADDR 0x164270 +/* [RW 1] Linear0 physical address valid. */ +#define TM_REG_LIN0_PHY_ADDR_VALID 0x164248 /* [RW 24] Linear0 array scan timeout. */ #define TM_REG_LIN0_SCAN_TIME 0x16403c +/* [RW 32] Linear1 logic address. */ +#define TM_REG_LIN1_LOGIC_ADDR 0x164250 /* [WB 64] Linear1 phy address. */ #define TM_REG_LIN1_PHY_ADDR 0x164280 +/* [RW 1] Linear1 physical address valid. */ +#define TM_REG_LIN1_PHY_ADDR_VALID 0x164258 /* [RW 6] Linear timer set_clear fifo threshold. */ #define TM_REG_LIN_SETCLR_FIFO_ALFULL_THR 0x164070 /* [RW 2] Load value for pci arbiter credit cnt. */ @@ -3708,6 +3852,17 @@ #define TM_REG_TM_INT_STS 0x1640f0 /* [RW 8] The event id for aggregated interrupt 0 */ #define TSDM_REG_AGG_INT_EVENT_0 0x42038 +#define TSDM_REG_AGG_INT_EVENT_1 0x4203c +#define TSDM_REG_AGG_INT_EVENT_10 0x42060 +#define TSDM_REG_AGG_INT_EVENT_11 0x42064 +#define TSDM_REG_AGG_INT_EVENT_12 0x42068 +#define TSDM_REG_AGG_INT_EVENT_13 0x4206c +#define TSDM_REG_AGG_INT_EVENT_14 0x42070 +#define TSDM_REG_AGG_INT_EVENT_15 0x42074 +#define TSDM_REG_AGG_INT_EVENT_16 0x42078 +#define TSDM_REG_AGG_INT_EVENT_17 0x4207c +#define TSDM_REG_AGG_INT_EVENT_18 0x42080 +#define TSDM_REG_AGG_INT_EVENT_19 0x42084 #define TSDM_REG_AGG_INT_EVENT_2 0x42040 #define TSDM_REG_AGG_INT_EVENT_20 0x42088 #define TSDM_REG_AGG_INT_EVENT_21 0x4208c @@ -3723,6 +3878,19 @@ #define TSDM_REG_AGG_INT_EVENT_30 0x420b0 #define TSDM_REG_AGG_INT_EVENT_31 0x420b4 #define TSDM_REG_AGG_INT_EVENT_4 0x42048 +/* [RW 1] The T bit for aggregated interrupt 0 */ +#define TSDM_REG_AGG_INT_T_0 0x420b8 +#define TSDM_REG_AGG_INT_T_1 0x420bc +#define TSDM_REG_AGG_INT_T_10 0x420e0 +#define TSDM_REG_AGG_INT_T_11 0x420e4 +#define TSDM_REG_AGG_INT_T_12 0x420e8 +#define TSDM_REG_AGG_INT_T_13 0x420ec +#define TSDM_REG_AGG_INT_T_14 0x420f0 +#define TSDM_REG_AGG_INT_T_15 0x420f4 +#define TSDM_REG_AGG_INT_T_16 0x420f8 +#define TSDM_REG_AGG_INT_T_17 0x420fc +#define TSDM_REG_AGG_INT_T_18 0x42100 +#define TSDM_REG_AGG_INT_T_19 0x42104 /* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */ #define TSDM_REG_CFC_RSP_START_ADDR 0x42008 /* [RW 16] The maximum value of the competion counter #0 */ @@ -3967,6 +4135,10 @@ /* [RC 1] Set when the message length mismatch (relative to last indication) at the dorq interface is detected. */ #define UCM_REG_DORQ_LENGTH_MIS 0xe0168 +/* [RW 3] The weight of the input dorq in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define UCM_REG_DORQ_WEIGHT 0xe00c0 /* [RW 8] The Event ID in case ErrorFlg input message bit is set. */ #define UCM_REG_ERR_EVNT_ID 0xe00a4 /* [RW 28] The CM erroneous header for QM and Timers formatting. */ @@ -4030,6 +4202,10 @@ disregarded; acknowledge output is deasserted; all other signals are treated as usual; if 1 - normal activity. */ #define UCM_REG_STORM_UCM_IFEN 0xe0010 +/* [RW 3] The weight of the STORM input in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define UCM_REG_STORM_WEIGHT 0xe00b0 /* [RW 4] Timers output initial credit. Max credit available - 15.Write writes the initial credit value; read returns the current value of the credit counter. Must be initialized to 4 at start-up. */ @@ -4040,6 +4216,10 @@ disregarded; acknowledge output is deasserted; all other signals are treated as usual; if 1 - normal activity. */ #define UCM_REG_TM_UCM_IFEN 0xe001c +/* [RW 3] The weight of the Timers input in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define UCM_REG_TM_WEIGHT 0xe00d4 /* [RW 1] Input tsem Interface enable. If 0 - the valid input is disregarded; acknowledge output is deasserted; all other signals are treated as usual; if 1 - normal activity. */ @@ -4092,6 +4272,10 @@ stands for weight 8 (the most prioritised); 1 stands for weight 1(least prioritised); 2 stands for weight 2; tc. */ #define UCM_REG_UQM_P_WEIGHT 0xe00cc +/* [RW 3] The weight of the QM (secondary) input in the WRR mechanism. 0 + stands for weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define UCM_REG_UQM_S_WEIGHT 0xe00d0 /* [RW 28] The CM header value for QM request (primary). */ #define UCM_REG_UQM_UCM_HDR_P 0xe0094 /* [RW 28] The CM header value for QM request (secondary). */ @@ -4107,6 +4291,10 @@ /* [RC 1] Set when the message length mismatch (relative to last indication) at the SDM interface is detected. */ #define UCM_REG_USDM_LENGTH_MIS 0xe0158 +/* [RW 3] The weight of the SDM input in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define UCM_REG_USDM_WEIGHT 0xe00c8 /* [RW 1] Input xsem Interface enable. If 0 - the valid input is disregarded; acknowledge output is deasserted; all other signals are treated as usual; if 1 - normal activity. */ @@ -4114,6 +4302,10 @@ /* [RC 1] Set when the message length mismatch (relative to last indication) at the xsem interface isdetected. */ #define UCM_REG_XSEM_LENGTH_MIS 0xe0164 +/* [RW 3] The weight of the input xsem in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define UCM_REG_XSEM_WEIGHT 0xe00bc /* [RW 20] Indirect access to the descriptor table of the XX protection mechanism. The fields are:[5:0] - message length; 14:6] - message pointer; 19:15] - next pointer. */ @@ -4163,6 +4355,7 @@ #define USDM_REG_AGG_INT_EVENT_30 0xc40b0 #define USDM_REG_AGG_INT_EVENT_31 0xc40b4 #define USDM_REG_AGG_INT_EVENT_4 0xc4048 +#define USDM_REG_AGG_INT_EVENT_5 0xc404c /* [RW 1] For each aggregated interrupt index whether the mode is normal (0) or auto-mask-mode (1) */ #define USDM_REG_AGG_INT_MODE_0 0xc41b8 @@ -4177,6 +4370,8 @@ #define USDM_REG_AGG_INT_MODE_17 0xc41fc #define USDM_REG_AGG_INT_MODE_18 0xc4200 #define USDM_REG_AGG_INT_MODE_19 0xc4204 +#define USDM_REG_AGG_INT_MODE_4 0xc41c8 +#define USDM_REG_AGG_INT_MODE_5 0xc41cc /* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */ #define USDM_REG_CFC_RSP_START_ADDR 0xc4008 /* [RW 16] The maximum value of the competion counter #0 */ @@ -4427,6 +4622,10 @@ /* [RC 1] Set at message length mismatch (relative to last indication) at the dorq interface. */ #define XCM_REG_DORQ_LENGTH_MIS 0x20230 +/* [RW 3] The weight of the input dorq in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define XCM_REG_DORQ_WEIGHT 0x200cc /* [RW 8] The Event ID in case the ErrorFlg input message bit is set. */ #define XCM_REG_ERR_EVNT_ID 0x200b0 /* [RW 28] The CM erroneous header for QM and Timers formatting. */ @@ -4465,6 +4664,10 @@ /* [RC 1] Set at message length mismatch (relative to last indication) at the nig0 interface. */ #define XCM_REG_NIG0_LENGTH_MIS 0x20238 +/* [RW 3] The weight of the input nig0 in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define XCM_REG_NIG0_WEIGHT 0x200d4 /* [RW 1] Input nig1 Interface enable. If 0 - the valid input is disregarded; acknowledge output is deasserted; all other signals are treated as usual; if 1 - normal activity. */ @@ -4523,6 +4726,10 @@ writes the initial credit value; read returns the current value of the credit counter. Must be initialized to 4 at start-up. */ #define XCM_REG_TM_INIT_CRD 0x2041c +/* [RW 3] The weight of the Timers input in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define XCM_REG_TM_WEIGHT 0x200ec /* [RW 28] The CM header for Timers expiration command. */ #define XCM_REG_TM_XCM_HDR 0x200a8 /* [RW 1] Timers - CM Interface enable. If 0 - the valid input is @@ -4608,6 +4815,10 @@ stands for weight 8 (the most prioritised); 1 stands for weight 1(least prioritised); 2 stands for weight 2; tc. */ #define XCM_REG_XQM_P_WEIGHT 0x200e4 +/* [RW 3] The weight of the QM (secondary) input in the WRR mechanism. 0 + stands for weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define XCM_REG_XQM_S_WEIGHT 0x200e8 /* [RW 28] The CM header value for QM request (primary). */ #define XCM_REG_XQM_XCM_HDR_P 0x200a0 /* [RW 28] The CM header value for QM request (secondary). */ @@ -4665,6 +4876,8 @@ #define XSDM_REG_AGG_INT_EVENT_10 0x166060 #define XSDM_REG_AGG_INT_EVENT_11 0x166064 #define XSDM_REG_AGG_INT_EVENT_12 0x166068 +#define XSDM_REG_AGG_INT_EVENT_13 0x16606c +#define XSDM_REG_AGG_INT_EVENT_14 0x166070 #define XSDM_REG_AGG_INT_EVENT_2 0x166040 #define XSDM_REG_AGG_INT_EVENT_20 0x166088 #define XSDM_REG_AGG_INT_EVENT_21 0x16608c @@ -4964,9 +5177,11 @@ #define EMAC_RX_MODE_FLOW_EN (1L<<2) #define EMAC_RX_MODE_KEEP_VLAN_TAG (1L<<10) #define EMAC_RX_MODE_PROMISCUOUS (1L<<8) +#define EMAC_RX_MODE_RESET (1L<<0) #define EMAC_RX_MTU_SIZE_JUMBO_ENA (1L<<31) #define EMAC_TX_MODE_EXT_PAUSE_EN (1L<<3) #define EMAC_TX_MODE_FLOW_EN (1L<<4) +#define EMAC_TX_MODE_RESET (1L<<0) #define MISC_REGISTERS_GPIO_0 0 #define MISC_REGISTERS_GPIO_1 1 #define MISC_REGISTERS_GPIO_2 2 @@ -4976,6 +5191,10 @@ #define MISC_REGISTERS_GPIO_FLOAT_POS 24 #define MISC_REGISTERS_GPIO_HIGH 1 #define MISC_REGISTERS_GPIO_INPUT_HI_Z 2 +#define MISC_REGISTERS_GPIO_INT_CLR_POS 24 +#define MISC_REGISTERS_GPIO_INT_OUTPUT_CLR 0 +#define MISC_REGISTERS_GPIO_INT_OUTPUT_SET 1 +#define MISC_REGISTERS_GPIO_INT_SET_POS 16 #define MISC_REGISTERS_GPIO_LOW 0 #define MISC_REGISTERS_GPIO_OUTPUT_HIGH 1 #define MISC_REGISTERS_GPIO_OUTPUT_LOW 0 @@ -5015,11 +5234,12 @@ #define MISC_REGISTERS_SPIO_OUTPUT_LOW 0 #define MISC_REGISTERS_SPIO_SET_POS 8 #define HW_LOCK_MAX_RESOURCE_VALUE 31 -#define HW_LOCK_RESOURCE_8072_MDIO 0 #define HW_LOCK_RESOURCE_GPIO 1 +#define HW_LOCK_RESOURCE_MDIO 0 #define HW_LOCK_RESOURCE_PORT0_ATT_MASK 3 #define HW_LOCK_RESOURCE_SPIO 2 #define HW_LOCK_RESOURCE_UNDI 5 +#define PRS_FLAG_OVERETH_IPV4 1 #define AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR (1<<18) #define AEU_INPUTS_ATTN_BITS_CCM_HW_INTERRUPT (1<<31) #define AEU_INPUTS_ATTN_BITS_CDU_HW_INTERRUPT (1<<9) @@ -5034,6 +5254,8 @@ #define AEU_INPUTS_ATTN_BITS_DMAE_HW_INTERRUPT (1<<11) #define AEU_INPUTS_ATTN_BITS_DOORBELLQ_HW_INTERRUPT (1<<13) #define AEU_INPUTS_ATTN_BITS_DOORBELLQ_PARITY_ERROR (1<<12) +#define AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_0 (1<<5) +#define AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_1 (1<<9) #define AEU_INPUTS_ATTN_BITS_IGU_PARITY_ERROR (1<<12) #define AEU_INPUTS_ATTN_BITS_MISC_HW_INTERRUPT (1<<15) #define AEU_INPUTS_ATTN_BITS_MISC_PARITY_ERROR (1<<14) @@ -5188,7 +5410,7 @@ #define PCICFG_COMMAND_INT_DISABLE (1<<10) #define PCICFG_COMMAND_RESERVED (0x1f<<11) #define PCICFG_STATUS_OFFSET 0x06 -#define PCICFG_REVESION_ID 0x08 +#define PCICFG_REVESION_ID_OFFSET 0x08 #define PCICFG_CACHE_LINE_SIZE 0x0c #define PCICFG_LATENCY_TIMER 0x0d #define PCICFG_BAR_1_LOW 0x10 @@ -5216,9 +5438,28 @@ #define PCICFG_PM_CSR_STATE (0x3<<0) #define PCICFG_PM_CSR_PME_ENABLE (1<<8) #define PCICFG_PM_CSR_PME_STATUS (1<<15) +#define PCICFG_MSI_CAP_ID_OFFSET 0x58 +#define PCICFG_MSI_CONTROL_ENABLE (0x1<<16) +#define PCICFG_MSI_CONTROL_MCAP (0x7<<17) +#define PCICFG_MSI_CONTROL_MENA (0x7<<20) +#define PCICFG_MSI_CONTROL_64_BIT_ADDR_CAP (0x1<<23) +#define PCICFG_MSI_CONTROL_MSI_PVMASK_CAPABLE (0x1<<24) #define PCICFG_GRC_ADDRESS 0x78 #define PCICFG_GRC_DATA 0x80 +#define PCICFG_MSIX_CAP_ID_OFFSET 0xa0 +#define PCICFG_MSIX_CONTROL_TABLE_SIZE (0x7ff<<16) +#define PCICFG_MSIX_CONTROL_RESERVED (0x7<<27) +#define PCICFG_MSIX_CONTROL_FUNC_MASK (0x1<<30) +#define PCICFG_MSIX_CONTROL_MSIX_ENABLE (0x1<<31) + #define PCICFG_DEVICE_CONTROL 0xb4 +#define PCICFG_DEVICE_STATUS 0xb6 +#define PCICFG_DEVICE_STATUS_CORR_ERR_DET (1<<0) +#define PCICFG_DEVICE_STATUS_NON_FATAL_ERR_DET (1<<1) +#define PCICFG_DEVICE_STATUS_FATAL_ERR_DET (1<<2) +#define PCICFG_DEVICE_STATUS_UNSUP_REQ_DET (1<<3) +#define PCICFG_DEVICE_STATUS_AUX_PWR_DET (1<<4) +#define PCICFG_DEVICE_STATUS_NO_PEND (1<<5) #define PCICFG_LINK_CONTROL 0xbc @@ -5363,6 +5604,42 @@ #define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT 1 #define MDIO_TX0_TX_DRIVER_ICBUF1T 1 +#define MDIO_REG_BANK_TX1 0x8070 +#define MDIO_TX1_TX_DRIVER 0x17 +#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK 0xf000 +#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT 12 +#define MDIO_TX0_TX_DRIVER_IDRIVER_MASK 0x0f00 +#define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT 8 +#define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK 0x00f0 +#define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT 4 +#define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK 0x000e +#define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT 1 +#define MDIO_TX0_TX_DRIVER_ICBUF1T 1 + +#define MDIO_REG_BANK_TX2 0x8080 +#define MDIO_TX2_TX_DRIVER 0x17 +#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK 0xf000 +#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT 12 +#define MDIO_TX0_TX_DRIVER_IDRIVER_MASK 0x0f00 +#define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT 8 +#define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK 0x00f0 +#define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT 4 +#define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK 0x000e +#define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT 1 +#define MDIO_TX0_TX_DRIVER_ICBUF1T 1 + +#define MDIO_REG_BANK_TX3 0x8090 +#define MDIO_TX3_TX_DRIVER 0x17 +#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK 0xf000 +#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT 12 +#define MDIO_TX0_TX_DRIVER_IDRIVER_MASK 0x0f00 +#define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT 8 +#define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK 0x00f0 +#define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT 4 +#define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK 0x000e +#define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT 1 +#define MDIO_TX0_TX_DRIVER_ICBUF1T 1 + #define MDIO_REG_BANK_XGXS_BLOCK0 0x8000 #define MDIO_BLOCK0_XGXS_CONTROL 0x10 @@ -5566,9 +5843,30 @@ Theotherbitsarereservedandshouldbezero*/ #define MDIO_PMA_REG_ROM_VER2 0xca1a #define MDIO_PMA_REG_EDC_FFE_MAIN 0xca1b #define MDIO_PMA_REG_PLL_BANDWIDTH 0xca1d +#define MDIO_PMA_REG_GEN_CTRL2 0xca1e +#define MDIO_PMA_REG_MISC_CTRL0 0xca23 +#define MDIO_PMA_REG_LRM_MODE 0xca3f #define MDIO_PMA_REG_CDR_BANDWIDTH 0xca46 #define MDIO_PMA_REG_MISC_CTRL1 0xca85 +#define MDIO_PMA_REG_8726_TWO_WIRE_CTRL 0x8000 +#define MDIO_PMA_REG_8726_TWO_WIRE_CTRL_STATUS_MASK 0x000c +#define MDIO_PMA_REG_8726_TWO_WIRE_STATUS_IDLE 0x0000 +#define MDIO_PMA_REG_8726_TWO_WIRE_STATUS_COMPLETE 0x0004 +#define MDIO_PMA_REG_8726_TWO_WIRE_STATUS_IN_PROGRESS 0x0008 +#define MDIO_PMA_REG_8726_TWO_WIRE_STATUS_FAILED 0x000c +#define MDIO_PMA_REG_8726_TWO_WIRE_BYTE_CNT 0x8002 +#define MDIO_PMA_REG_8726_TWO_WIRE_MEM_ADDR 0x8003 +#define MDIO_PMA_REG_8726_TWO_WIRE_DATA_BUF 0xc820 +#define MDIO_PMA_REG_8726_TWO_WIRE_DATA_MASK 0xff +#define MDIO_PMA_REG_8726_TX_CTRL1 0xca01 +#define MDIO_PMA_REG_8726_TX_CTRL2 0xca05 + + +#define MDIO_PMA_REG_8073_CHIP_REV 0xc801 +#define MDIO_PMA_REG_8073_SPEED_LINK_STATUS 0xc820 +#define MDIO_PMA_REG_8073_XAUI_WA 0xc841 + #define MDIO_PMA_REG_7101_RESET 0xc000 #define MDIO_PMA_REG_7107_LED_CNTL 0xc007 #define MDIO_PMA_REG_7101_VER1 0xc026 @@ -5598,6 +5896,12 @@ Theotherbitsarereservedandshouldbezero*/ #define MDIO_XS_PLL_SEQUENCER 0x8000 #define MDIO_XS_SFX7101_XGXS_TEST1 0xc00a +#define MDIO_XS_8706_REG_BANK_RX0 0x80bc +#define MDIO_XS_8706_REG_BANK_RX1 0x80cc +#define MDIO_XS_8706_REG_BANK_RX2 0x80dc +#define MDIO_XS_8706_REG_BANK_RX3 0x80ec +#define MDIO_XS_8706_REG_BANK_RXA 0x80fc + #define MDIO_AN_DEVAD 0x7 /*ieee*/ #define MDIO_AN_REG_CTRL 0x0000 @@ -5619,6 +5923,8 @@ Theotherbitsarereservedandshouldbezero*/ #define MDIO_AN_REG_CL37_FC_LD 0xffe4 #define MDIO_AN_REG_CL37_FC_LP 0xffe5 +#define MDIO_AN_REG_8073_2_5G 0x8329 + #define IGU_FUNC_BASE 0x0400 |