diff options
author | Eilon Greenstein <eilong@broadcom.com> | 2009-02-12 08:36:55 +0000 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2009-02-15 23:31:24 -0800 |
commit | 589abe3a0f594a7707a15674ca9e80370c972832 (patch) | |
tree | a7930047ca7f5340b9053948fcba98128de4d588 /drivers/net/bnx2x_main.c | |
parent | 4acac6a53a3c9dfc604a9a8647f16b0242080e93 (diff) | |
download | op-kernel-dev-589abe3a0f594a7707a15674ca9e80370c972832.zip op-kernel-dev-589abe3a0f594a7707a15674ca9e80370c972832.tar.gz |
bnx2x: Supporting BCM8726 PHY
Also adding the ability to recognize the optic module and disable it if it is
not authorized for safety reasons - since this feature might upset some users
which are willing to take the risk, it is optional and can be disabled by
setting an nvram bit (or a trivial driver patch to set this bit).
This dual port PHY requires special handling if the ports are swapped.
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/bnx2x_main.c')
-rw-r--r-- | drivers/net/bnx2x_main.c | 90 |
1 files changed, 75 insertions, 15 deletions
diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index 95f8e58..5acbd98 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -2112,7 +2112,7 @@ static void bnx2x__link_reset(struct bnx2x *bp) { if (!BP_NOMCP(bp)) { bnx2x_acquire_phy_lock(bp); - bnx2x_link_reset(&bp->link_params, &bp->link_vars); + bnx2x_link_reset(&bp->link_params, &bp->link_vars, 1); bnx2x_release_phy_lock(bp); } else BNX2X_ERR("Bootcode is missing -not resetting link\n"); @@ -2613,6 +2613,13 @@ static inline void bnx2x_attn_int_deasserted0(struct bnx2x *bp, u32 attn) } } + if (attn & (AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_0 | + AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_1)) { + bnx2x_acquire_phy_lock(bp); + bnx2x_handle_module_detect_int(&bp->link_params); + bnx2x_release_phy_lock(bp); + } + if (attn & HW_INTERRUT_ASSERT_SET_0) { val = REG_RD(bp, reg_offset); @@ -5905,6 +5912,37 @@ static int bnx2x_init_port(struct bnx2x *bp) /* Port DMAE comes here */ switch (XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config)) { + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726: + { + u32 swap_val, swap_override, aeu_gpio_mask, offset; + + bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_3, + MISC_REGISTERS_GPIO_INPUT_HI_Z, port); + + /* The GPIO should be swapped if the swap register is + set and active */ + swap_val = REG_RD(bp, NIG_REG_PORT_SWAP); + swap_override = REG_RD(bp, NIG_REG_STRAP_OVERRIDE); + + /* Select function upon port-swap configuration */ + if (port == 0) { + offset = MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0; + aeu_gpio_mask = (swap_val && swap_override) ? + AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_1 : + AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_0; + } else { + offset = MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0; + aeu_gpio_mask = (swap_val && swap_override) ? + AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_0 : + AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_1; + } + val = REG_RD(bp, offset); + /* add GPIO3 to group */ + val |= aeu_gpio_mask; + REG_WR(bp, offset, val); + } + break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101: /* add SPIO 5 to group 0 */ val = REG_RD(bp, MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0); @@ -7623,48 +7661,60 @@ static void __devinit bnx2x_link_settings_supported(struct bnx2x *bp, SUPPORTED_Asym_Pause); break; - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705: - BNX2X_DEV_INFO("ext_phy_type 0x%x (8705)\n", + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072: + BNX2X_DEV_INFO("ext_phy_type 0x%x (8072)\n", ext_phy_type); bp->port.supported |= (SUPPORTED_10000baseT_Full | + SUPPORTED_1000baseT_Full | SUPPORTED_FIBRE | + SUPPORTED_Autoneg | SUPPORTED_Pause | SUPPORTED_Asym_Pause); break; - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706: - BNX2X_DEV_INFO("ext_phy_type 0x%x (8706)\n", + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073: + BNX2X_DEV_INFO("ext_phy_type 0x%x (8073)\n", ext_phy_type); bp->port.supported |= (SUPPORTED_10000baseT_Full | + SUPPORTED_2500baseX_Full | SUPPORTED_1000baseT_Full | SUPPORTED_FIBRE | + SUPPORTED_Autoneg | + SUPPORTED_Pause | + SUPPORTED_Asym_Pause); + break; + + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705: + BNX2X_DEV_INFO("ext_phy_type 0x%x (8705)\n", + ext_phy_type); + + bp->port.supported |= (SUPPORTED_10000baseT_Full | + SUPPORTED_FIBRE | SUPPORTED_Pause | SUPPORTED_Asym_Pause); break; - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072: - BNX2X_DEV_INFO("ext_phy_type 0x%x (8072)\n", + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706: + BNX2X_DEV_INFO("ext_phy_type 0x%x (8706)\n", ext_phy_type); bp->port.supported |= (SUPPORTED_10000baseT_Full | SUPPORTED_1000baseT_Full | SUPPORTED_FIBRE | - SUPPORTED_Autoneg | SUPPORTED_Pause | SUPPORTED_Asym_Pause); break; - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073: - BNX2X_DEV_INFO("ext_phy_type 0x%x (8073)\n", + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726: + BNX2X_DEV_INFO("ext_phy_type 0x%x (8726)\n", ext_phy_type); bp->port.supported |= (SUPPORTED_10000baseT_Full | - SUPPORTED_2500baseX_Full | SUPPORTED_1000baseT_Full | - SUPPORTED_FIBRE | SUPPORTED_Autoneg | + SUPPORTED_FIBRE | SUPPORTED_Pause | SUPPORTED_Asym_Pause); break; @@ -7905,6 +7955,7 @@ static void __devinit bnx2x_get_port_hwinfo(struct bnx2x *bp) { int port = BP_PORT(bp); u32 val, val2; + u32 config; bp->link_params.bp = bp; bp->link_params.port = port; @@ -7923,6 +7974,14 @@ static void __devinit bnx2x_get_port_hwinfo(struct bnx2x *bp) bp->port.link_config = SHMEM_RD(bp, dev_info.port_feature_config[port].link_config); + config = SHMEM_RD(bp, dev_info.port_feature_config[port].config); + if (config & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_ENABLED) + bp->link_params.feature_config_flags |= + FEATURE_CONFIG_MODULE_ENFORCMENT_ENABLED; + else + bp->link_params.feature_config_flags &= + ~FEATURE_CONFIG_MODULE_ENFORCMENT_ENABLED; + BNX2X_DEV_INFO("serdes_config 0x%08x lane_config 0x%08x\n" KERN_INFO " ext_phy_config 0x%08x speed_cap_mask 0x%08x" " link_config 0x%08x\n", @@ -8121,10 +8180,11 @@ static int bnx2x_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) switch (ext_phy_type) { case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT: - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705: - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706: case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072: case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073: + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705: + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706: + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726: cmd->port = PORT_FIBRE; break; @@ -8807,7 +8867,7 @@ static int bnx2x_set_eeprom(struct net_device *dev, if ((bp->state == BNX2X_STATE_OPEN) || (bp->state == BNX2X_STATE_DISABLED)) { rc |= bnx2x_link_reset(&bp->link_params, - &bp->link_vars); + &bp->link_vars, 1); rc |= bnx2x_phy_init(&bp->link_params, &bp->link_vars); } |