Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1429 commits)
  net: Allow dependancies of FDDI & Tokenring to be modular.
  igb: Fix build warning when DCA is disabled.
  net: Fix warning fallout from recent NAPI interface changes.
  gro: Fix potential use after free
  sfc: If AN is enabled, always read speed/duplex from the AN advertising bits
  sfc: When disabling the NIC, close the device rather than unregistering it
  sfc: SFT9001: Add cable diagnostics
  sfc: Add support for multiple PHY self-tests
  sfc: Merge top-level functions for self-tests
  sfc: Clean up PHY mode management in loopback self-test
  sfc: Fix unreliable link detection in some loopback modes
  sfc: Generate unique names for per-NIC workqueues
  802.3ad: use standard ethhdr instead of ad_header
  802.3ad: generalize out mac address initializer
  802.3ad: initialize ports LACPDU from const initializer
  802.3ad: remove typedef around ad_system
  802.3ad: turn ports is_individual into a bool
  802.3ad: turn ports is_enabled into a bool
  802.3ad: make ntt bool
  ixgbe: Fix set_ringparam in ixgbe to use the same memory pools.
  ...

Fixed trivial IPv4/6 address printing conflicts in fs/cifs/connect.c due
to the conversion to %pI (in this networking merge) and the addition of
doing IPv6 addresses (from the earlier merge of CIFS).

1 files changed, 29 insertions, 13 deletions

diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h
index 0b032c3..900641a 100644
--- a/drivers/net/bnx2.h
+++ b/drivers/net/bnx2.h
@@ -4202,7 +4202,14 @@ struct l2_fhdr {
 
 #define BNX2_RBUF_CONFIG				0x0020000c
 #define BNX2_RBUF_CONFIG_XOFF_TRIP			 (0x3ffL<<0)
+#define BNX2_RBUF_CONFIG_XOFF_TRIP_VAL(mtu)		 \
+	((((mtu) - 1500) * 31 / 1000) + 54)
 #define BNX2_RBUF_CONFIG_XON_TRIP			 (0x3ffL<<16)
+#define BNX2_RBUF_CONFIG_XON_TRIP_VAL(mtu)		 \
+	((((mtu) - 1500) * 39 / 1000) + 66)
+#define BNX2_RBUF_CONFIG_VAL(mtu)			 \
+	(BNX2_RBUF_CONFIG_XOFF_TRIP_VAL(mtu) |		 \
+	(BNX2_RBUF_CONFIG_XON_TRIP_VAL(mtu) << 16))
 
 #define BNX2_RBUF_FW_BUF_ALLOC				0x00200010
 #define BNX2_RBUF_FW_BUF_ALLOC_VALUE			 (0x1ffL<<7)
@@ -4224,11 +4231,25 @@ struct l2_fhdr {
 
 #define BNX2_RBUF_CONFIG2				0x0020001c
 #define BNX2_RBUF_CONFIG2_MAC_DROP_TRIP			 (0x3ffL<<0)
+#define BNX2_RBUF_CONFIG2_MAC_DROP_TRIP_VAL(mtu)	 \
+	((((mtu) - 1500) * 4 / 1000) + 5)
 #define BNX2_RBUF_CONFIG2_MAC_KEEP_TRIP			 (0x3ffL<<16)
+#define BNX2_RBUF_CONFIG2_MAC_KEEP_TRIP_VAL(mtu)	 \
+	((((mtu) - 1500) * 2 / 100) + 30)
+#define BNX2_RBUF_CONFIG2_VAL(mtu)			 \
+	(BNX2_RBUF_CONFIG2_MAC_DROP_TRIP_VAL(mtu) |	 \
+	(BNX2_RBUF_CONFIG2_MAC_KEEP_TRIP_VAL(mtu) << 16))
 
 #define BNX2_RBUF_CONFIG3				0x00200020
 #define BNX2_RBUF_CONFIG3_CU_DROP_TRIP			 (0x3ffL<<0)
+#define BNX2_RBUF_CONFIG3_CU_DROP_TRIP_VAL(mtu)		 \
+	((((mtu) - 1500) * 12 / 1000) + 18)
 #define BNX2_RBUF_CONFIG3_CU_KEEP_TRIP			 (0x3ffL<<16)
+#define BNX2_RBUF_CONFIG3_CU_KEEP_TRIP_VAL(mtu)		 \
+	((((mtu) - 1500) * 2 / 100) + 30)
+#define BNX2_RBUF_CONFIG3_VAL(mtu)			 \
+	(BNX2_RBUF_CONFIG3_CU_DROP_TRIP_VAL(mtu) |	 \
+	(BNX2_RBUF_CONFIG3_CU_KEEP_TRIP_VAL(mtu) << 16))
 
 #define BNX2_RBUF_PKT_DATA				0x00208000
 #define BNX2_RBUF_CLIST_DATA				0x00210000
@@ -6606,7 +6627,7 @@ struct bnx2_irq {
 	irq_handler_t	handler;
 	unsigned int	vector;
 	u8		requested;
-	char		name[16];
+	char		name[IFNAMSIZ + 2];
 };
 
 struct bnx2_tx_ring_info {
@@ -6661,8 +6682,6 @@ struct bnx2_napi {
 	struct bnx2_tx_ring_info	tx_ring;
 };
 
-#define BNX2_TIMER_INTERVAL			HZ
-
 struct bnx2 {
 	/* Fields used in the tx and intr/napi performance paths are grouped */
 	/* together in the beginning of the structure. */
@@ -6710,7 +6729,11 @@ struct bnx2 {
 
 	/* End of fields used in the performance code paths. */
 
-	int			current_interval;
+	unsigned int		current_interval;
+#define BNX2_TIMER_INTERVAL		HZ
+#define BNX2_SERDES_AN_TIMEOUT		(HZ / 3)
+#define BNX2_SERDES_FORCED_TIMEOUT	(HZ / 10)
+
 	struct			timer_list timer;
 	struct work_struct	reset_task;
 
@@ -6825,9 +6848,6 @@ struct bnx2 {
 	u8			flow_ctrl;	/* actual flow ctrl settings */
 						/* may be different from     */
 						/* req_flow_ctrl if autoneg  */
-#define FLOW_CTRL_TX		1
-#define FLOW_CTRL_RX		2
-
 	u32			advertising;
 
 	u8			req_flow_ctrl;	/* flow ctrl advertisement */
@@ -6842,8 +6862,6 @@ struct bnx2 {
 #define PHY_LOOPBACK		2
 
 	u8			serdes_an_pending;
-#define SERDES_AN_TIMEOUT	(HZ / 3)
-#define SERDES_FORCED_TIMEOUT	(HZ / 10)
 
 	u8			mac_addr[8];
 
@@ -6854,8 +6872,6 @@ struct bnx2 {
 	int			pm_cap;
 	int			pcix_cap;
 
-	struct net_device_stats net_stats;
-
 	struct flash_spec	*flash_info;
 	u32			flash_size;
 
@@ -6944,14 +6960,14 @@ struct fw_info {
 /* This value (in milliseconds) determines the frequency of the driver
  * issuing the PULSE message code.  The firmware monitors this periodic
  * pulse to determine when to switch to an OS-absent mode. */
-#define DRV_PULSE_PERIOD_MS                 250
+#define BNX2_DRV_PULSE_PERIOD_MS                 250
 
 /* This value (in milliseconds) determines how long the driver should
  * wait for an acknowledgement from the firmware before timing out.  Once
  * the firmware has timed out, the driver will assume there is no firmware
  * running and there won't be any firmware-driver synchronization during a
  * driver reset. */
-#define FW_ACK_TIME_OUT_MS                  1000
+#define BNX2_FW_ACK_TIME_OUT_MS                  1000
 
 
 #define BNX2_DRV_RESET_SIGNATURE		0x00000000