summaryrefslogtreecommitdiffstats
path: root/drivers/net/atl1e
diff options
context:
space:
mode:
authorMatthew Wilcox <matthew@wil.cx>2008-08-12 07:13:14 -0600
committerJeff Garzik <jgarzik@redhat.com>2008-09-24 18:49:01 -0400
commitf382a0a8e9403c6d7f8b2cfa21e41fefb5d0c9bd (patch)
tree2fa31ffb8dc9c32d5e497309c3388e57f19b9e95 /drivers/net/atl1e
parent70666c71957b62c8e9ea5c0d999a4bfd214c80d2 (diff)
downloadop-kernel-dev-f382a0a8e9403c6d7f8b2cfa21e41fefb5d0c9bd.zip
op-kernel-dev-f382a0a8e9403c6d7f8b2cfa21e41fefb5d0c9bd.tar.gz
[netdrvr] atl1e: Don't take the mdio_lock in atl1e_probe
Lockdep warns about the mdio_lock taken with interrupts enabled then later taken from interrupt context. Initially, I considered changing these to spin_lock_irq/spin_unlock_irq, but then I looked at atl1e_phy_init() and saw that it calls msleep(). Sleeping while holding a spinlock is not allowed either. In the probe path, we haven't registered the interrupt handler, so it can't poke at this card yet. It's before we call register_netdev(), so I don't think any other threads can reach this card either. If I'm right, we don't need a spinlock at all. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Diffstat (limited to 'drivers/net/atl1e')
-rw-r--r--drivers/net/atl1e/atl1e_main.c2
1 files changed, 0 insertions, 2 deletions
diff --git a/drivers/net/atl1e/atl1e_main.c b/drivers/net/atl1e/atl1e_main.c
index 7685b99..9b60352 100644
--- a/drivers/net/atl1e/atl1e_main.c
+++ b/drivers/net/atl1e/atl1e_main.c
@@ -2390,9 +2390,7 @@ static int __devinit atl1e_probe(struct pci_dev *pdev,
}
/* Init GPHY as early as possible due to power saving issue */
- spin_lock(&adapter->mdio_lock);
atl1e_phy_init(&adapter->hw);
- spin_unlock(&adapter->mdio_lock);
/* reset the controller to
* put the device in a known good starting state */
err = atl1e_reset_hw(&adapter->hw);
OpenPOWER on IntegriCloud