macb: Move the Atmel driver

Move the Atmel driver into drivers/net/ethernet/cadence/ and
make the necessary Kconfig and Makefile changes.

CC: Nicolas Ferre <nicolas.ferre@atmel.com>
CC: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Jamie Iles <jamie@jamieiles.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>

1 files changed, 0 insertions, 109 deletions

diff --git a/drivers/net/arm/at91_ether.h b/drivers/net/arm/at91_ether.h
deleted file mode 100644
index 353f4da..0000000
--- a/drivers/net/arm/at91_ether.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * Ethernet driver for the Atmel AT91RM9200 (Thunder)
- *
- *  Copyright (C) SAN People (Pty) Ltd
- *
- * Based on an earlier Atmel EMAC macrocell driver by Atmel and Lineo Inc.
- * Initial version by Rick Bronson.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef AT91_ETHERNET
-#define AT91_ETHERNET
-
-
-/* Davicom 9161 PHY */
-#define MII_DM9161_ID		0x0181b880
-#define MII_DM9161A_ID		0x0181b8a0
-#define MII_DSCR_REG		16
-#define MII_DSCSR_REG		17
-#define MII_DSINTR_REG		21
-
-/* Intel LXT971A PHY */
-#define MII_LXT971A_ID		0x001378E0
-#define MII_ISINTE_REG		18
-#define MII_ISINTS_REG		19
-#define MII_LEDCTRL_REG		20
-
-/* Realtek RTL8201 PHY */
-#define MII_RTL8201_ID		0x00008200
-
-/* Broadcom BCM5221 PHY */
-#define MII_BCM5221_ID		0x004061e0
-#define MII_BCMINTR_REG		26
-
-/* National Semiconductor DP83847 */
-#define MII_DP83847_ID		0x20005c30
-
-/* National Semiconductor DP83848 */
-#define MII_DP83848_ID		0x20005c90
-#define MII_DPPHYSTS_REG	16
-#define MII_DPMICR_REG		17
-#define MII_DPMISR_REG		18
-
-/* Altima AC101L PHY */
-#define MII_AC101L_ID		0x00225520
-
-/* Micrel KS8721 PHY */
-#define MII_KS8721_ID		0x00221610
-
-/* Teridian 78Q2123/78Q2133 */
-#define MII_T78Q21x3_ID		0x000e7230
-#define MII_T78Q21INT_REG	17
-
-/* SMSC LAN83C185 */
-#define MII_LAN83C185_ID	0x0007C0A0
-
-/* ........................................................................ */
-
-#define MAX_RBUFF_SZ	0x600		/* 1518 rounded up */
-#define MAX_RX_DESCR	9		/* max number of receive buffers */
-
-#define EMAC_DESC_DONE	0x00000001	/* bit for if DMA is done */
-#define EMAC_DESC_WRAP	0x00000002	/* bit for wrap */
-
-#define EMAC_BROADCAST	0x80000000	/* broadcast address */
-#define EMAC_MULTICAST	0x40000000	/* multicast address */
-#define EMAC_UNICAST	0x20000000	/* unicast address */
-
-struct rbf_t
-{
-	unsigned int addr;
-	unsigned long size;
-};
-
-struct recv_desc_bufs
-{
-	struct rbf_t descriptors[MAX_RX_DESCR];		/* must be on sizeof (rbf_t) boundary */
-	char recv_buf[MAX_RX_DESCR][MAX_RBUFF_SZ];	/* must be on long boundary */
-};
-
-struct at91_private
-{
-	struct mii_if_info mii;			/* ethtool support */
-	struct at91_eth_data board_data;	/* board-specific configuration */
-	struct clk *ether_clk;			/* clock */
-
-	/* PHY */
-	unsigned long phy_type;			/* type of PHY (PHY_ID) */
-	spinlock_t lock;			/* lock for MDI interface */
-	short phy_media;			/* media interface type */
-	unsigned short phy_address;		/* 5-bit MDI address of PHY (0..31) */
-	struct timer_list check_timer;		/* Poll link status */
-
-	/* Transmit */
-	struct sk_buff *skb;			/* holds skb until xmit interrupt completes */
-	dma_addr_t skb_physaddr;		/* phys addr from pci_map_single */
-	int skb_length;				/* saved skb length for pci_unmap_single */
-
-	/* Receive */
-	int rxBuffIndex;			/* index into receive descriptor list */
-	struct recv_desc_bufs *dlist;		/* descriptor list address */
-	struct recv_desc_bufs *dlist_phys;	/* descriptor list physical address */
-};
-
-#endif