drm: merge Linux master into HEAD

Conflicts:
	drivers/gpu/drm/drm_info.c
	drivers/gpu/drm/drm_proc.c
	drivers/gpu/drm/i915/i915_gem_debugfs.c

1 files changed, 42 insertions, 13 deletions

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index a2f185f..f062b42 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -26,6 +26,15 @@ menuconfig NETDEVICES
 # that for each of the symbols.
 if NETDEVICES
 
+config COMPAT_NET_DEV_OPS
+       default y
+       bool "Enable older network device API compatiablity"
+       ---help---
+          This option enables kernel compatiability with older network devices
+          that do not use net_device_ops interface.
+
+	  If unsure, say Y.
+
 config IFB
 	tristate "Intermediate Functional Block support"
 	depends on NET_CLS_ACT
@@ -963,6 +972,14 @@ config ENC28J60_WRITEVERIFY
 	  Enable the verify after the buffer write useful for debugging purpose.
 	  If unsure, say N.
 
+config ETHOC
+	tristate "OpenCores 10/100 Mbps Ethernet MAC support"
+	depends on NET_ETHERNET
+	select MII
+	select PHYLIB
+	help
+	  Say Y here if you want to use the OpenCores 10/100 Mbps Ethernet MAC.
+
 config SMC911X
 	tristate "SMSC LAN911[5678] support"
 	select CRC32
@@ -1040,6 +1057,17 @@ config NI65
 	  To compile this driver as a module, choose M here. The module
 	  will be called ni65.
 
+config DNET
+	tristate "Dave ethernet support (DNET)"
+	depends on NET_ETHERNET && HAS_IOMEM
+	select PHYLIB
+	help
+	  The Dave ethernet interface (DNET) is found on Qong Board FPGA.
+	  Say Y to include support for the DNET chip.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called dnet.
+
 source "drivers/net/tulip/Kconfig"
 
 config AT1700
@@ -1829,10 +1857,10 @@ config 68360_ENET
 
 config FEC
 	bool "FEC ethernet controller (of ColdFire CPUs)"
-	depends on M523x || M527x || M5272 || M528x || M520x || M532x
+	depends on M523x || M527x || M5272 || M528x || M520x || M532x || MACH_MX27
 	help
 	  Say Y here if you want to use the built-in 10/100 Fast ethernet
-	  controller on some Motorola ColdFire processors.
+	  controller on some Motorola ColdFire and Freescale i.MX processors.
 
 config FEC2
 	bool "Second FEC ethernet controller (on some ColdFire CPUs)"
@@ -2019,15 +2047,6 @@ config IGB
          To compile this driver as a module, choose M here. The module
          will be called igb.
 
-config IGB_LRO 
-	bool "Use software LRO"
-	depends on IGB && INET
-	select INET_LRO
-	---help---
-	  Say Y here if you want to use large receive offload. 
-
-	  If in doubt, say N.
-
 config IGB_DCA
 	bool "Direct Cache Access (DCA) Support"
 	default y
@@ -2273,9 +2292,17 @@ config GELIC_WIRELESS_OLD_PSK_INTERFACE
 
           If unsure, say N.
 
+config FSL_PQ_MDIO
+	tristate "Freescale PQ MDIO"
+	depends on FSL_SOC
+	select PHYLIB
+	help
+	  This driver supports the MDIO bus used by the gianfar and UCC drivers.
+
 config GIANFAR
 	tristate "Gianfar Ethernet"
 	depends on FSL_SOC
+	select FSL_PQ_MDIO
 	select PHYLIB
 	select CRC32
 	help
@@ -2285,6 +2312,7 @@ config GIANFAR
 config UCC_GETH
 	tristate "Freescale QE Gigabit Ethernet"
 	depends on QUICC_ENGINE
+	select FSL_PQ_MDIO
 	select PHYLIB
 	help
 	  This driver supports the Gigabit Ethernet mode of the QUICC Engine,
@@ -2301,6 +2329,7 @@ config UGETH_TX_ON_DEMAND
 config MV643XX_ETH
 	tristate "Marvell Discovery (643XX) and Orion ethernet support"
 	depends on MV64360 || MV64X60 || (PPC_MULTIPLATFORM && PPC32) || PLAT_ORION
+	select INET_LRO
 	select PHYLIB
 	help
 	  This driver supports the gigabit ethernet MACs in the
@@ -2419,7 +2448,6 @@ config CHELSIO_T3
 	tristate "Chelsio Communications T3 10Gb Ethernet support"
 	depends on CHELSIO_T3_DEPENDS
 	select FW_LOADER
-	select INET_LRO
 	help
 	  This driver supports Chelsio T3-based gigabit and 10Gb Ethernet
 	  adapters.
@@ -2455,7 +2483,6 @@ config ENIC
 config IXGBE
 	tristate "Intel(R) 10GbE PCI Express adapters support"
 	depends on PCI && INET
-	select INET_LRO
 	---help---
 	  This driver supports Intel(R) 10GbE PCI Express family of
 	  adapters.  For more information on how to identify your adapter, go
@@ -2619,6 +2646,8 @@ config QLGE
 
 source "drivers/net/sfc/Kconfig"
 
+source "drivers/net/benet/Kconfig"
+
 endif # NETDEV_10000
 
 source "drivers/net/tokenring/Kconfig"