summaryrefslogtreecommitdiffstats
path: root/drivers/net/8390.h
diff options
context:
space:
mode:
authorBen Dooks <ben@fluff.org>2007-07-03 16:53:09 +0100
committerJeff Garzik <jeff@garzik.org>2007-07-10 12:41:08 -0400
commit825a2ff1896ec3ead94bebef60c71f57254da58a (patch)
treecc88b2a7666df7377819e8265298f974e388294e /drivers/net/8390.h
parentf49343a54864b98333b98706accba66aa75a0c16 (diff)
downloadop-kernel-dev-825a2ff1896ec3ead94bebef60c71f57254da58a.zip
op-kernel-dev-825a2ff1896ec3ead94bebef60c71f57254da58a.tar.gz
AX88796 network driver
Support for the Asix AX88796 network controller, an NE2000 compatible 10/100 ethernet device with internal PHY. The driver supports PHY settings via either ioctl() or the ethtool driver ops. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Diffstat (limited to 'drivers/net/8390.h')
-rw-r--r--drivers/net/8390.h11
1 files changed, 11 insertions, 0 deletions
diff --git a/drivers/net/8390.h b/drivers/net/8390.h
index 414de5b..04ddec0 100644
--- a/drivers/net/8390.h
+++ b/drivers/net/8390.h
@@ -73,6 +73,9 @@ struct ei_device {
u32 *reg_offset; /* Register mapping table */
spinlock_t page_lock; /* Page register locks */
unsigned long priv; /* Private field to store bus IDs etc. */
+#ifdef AX88796_PLATFORM
+ unsigned char rxcr_base; /* default value for RXCR */
+#endif
};
/* The maximum number of 8390 interrupt service routines called per IRQ. */
@@ -86,11 +89,19 @@ struct ei_device {
/* Some generic ethernet register configurations. */
#define E8390_TX_IRQ_MASK 0xa /* For register EN0_ISR */
#define E8390_RX_IRQ_MASK 0x5
+
+#ifdef AX88796_PLATFORM
+#define E8390_RXCONFIG (ei_status.rxcr_base | 0x04)
+#define E8390_RXOFF (ei_status.rxcr_base | 0x20)
+#else
#define E8390_RXCONFIG 0x4 /* EN0_RXCR: broadcasts, no multicast,errors */
#define E8390_RXOFF 0x20 /* EN0_RXCR: Accept no packets */
+#endif
+
#define E8390_TXCONFIG 0x00 /* EN0_TXCR: Normal transmit mode */
#define E8390_TXOFF 0x02 /* EN0_TXCR: Transmitter off */
+
/* Register accessed at EN_CMD, the 8390 base addr. */
#define E8390_STOP 0x01 /* Stop and reset the chip */
#define E8390_START 0x02 /* Start the chip, clear reset */
OpenPOWER on IntegriCloud