summaryrefslogtreecommitdiffstats
path: root/drivers/net/3c515.c
diff options
context:
space:
mode:
authorAl Viro <viro@ftp.linux.org.uk>2008-01-13 14:17:35 +0000
committerJeff Garzik <jeff@garzik.org>2008-01-18 14:44:33 -0500
commitb665982409fd5e4d3f1b71591d2f6badf9d2ee99 (patch)
tree00f16223e91563bd99cb4a42178f62e693aa2030 /drivers/net/3c515.c
parentc15561f0e5615607e2b5524c4b3af64d20cd6e28 (diff)
downloadop-kernel-dev-b665982409fd5e4d3f1b71591d2f6badf9d2ee99.zip
op-kernel-dev-b665982409fd5e4d3f1b71591d2f6badf9d2ee99.tar.gz
3c574, 3c515 bitfields abuse
wn3_config is shared by these cards; the way we deal with it is both bad C (union abuse) and broken on big-endian. For 3c515 it's less serious (ISA cards are quite rare outside of little-endian boxen), but 3c574 is a pcmcia one and that'd better be endian-independent... Fix is the same in both cases. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Diffstat (limited to 'drivers/net/3c515.c')
-rw-r--r--drivers/net/3c515.c60
1 files changed, 31 insertions, 29 deletions
diff --git a/drivers/net/3c515.c b/drivers/net/3c515.c
index 275e751..684bab7 100644
--- a/drivers/net/3c515.c
+++ b/drivers/net/3c515.c
@@ -243,14 +243,16 @@ enum eeprom_offset {
enum Window3 { /* Window 3: MAC/config bits. */
Wn3_Config = 0, Wn3_MAC_Ctrl = 6, Wn3_Options = 8,
};
-union wn3_config {
- int i;
- struct w3_config_fields {
- unsigned int ram_size:3, ram_width:1, ram_speed:2, rom_size:2;
- int pad8:8;
- unsigned int ram_split:2, pad18:2, xcvr:3, pad21:1, autoselect:1;
- int pad24:7;
- } u;
+enum wn3_config {
+ Ram_size = 7,
+ Ram_width = 8,
+ Ram_speed = 0x30,
+ Rom_size = 0xc0,
+ Ram_split_shift = 16,
+ Ram_split = 3 << Ram_split_shift,
+ Xcvr_shift = 20,
+ Xcvr = 7 << Xcvr_shift,
+ Autoselect = 0x1000000,
};
enum Window4 {
@@ -614,7 +616,7 @@ static int corkscrew_setup(struct net_device *dev, int ioaddr,
/* Read the station address from the EEPROM. */
EL3WINDOW(0);
for (i = 0; i < 0x18; i++) {
- short *phys_addr = (short *) dev->dev_addr;
+ __be16 *phys_addr = (__be16 *) dev->dev_addr;
int timer;
outw(EEPROM_Read + i, ioaddr + Wn0EepromCmd);
/* Pause for at least 162 us. for the read to take place. */
@@ -646,22 +648,22 @@ static int corkscrew_setup(struct net_device *dev, int ioaddr,
{
char *ram_split[] = { "5:3", "3:1", "1:1", "3:5" };
- union wn3_config config;
+ __u32 config;
EL3WINDOW(3);
vp->available_media = inw(ioaddr + Wn3_Options);
- config.i = inl(ioaddr + Wn3_Config);
+ config = inl(ioaddr + Wn3_Config);
if (corkscrew_debug > 1)
printk(KERN_INFO " Internal config register is %4.4x, transceivers %#x.\n",
- config.i, inw(ioaddr + Wn3_Options));
+ config, inw(ioaddr + Wn3_Options));
printk(KERN_INFO " %dK %s-wide RAM %s Rx:Tx split, %s%s interface.\n",
- 8 << config.u.ram_size,
- config.u.ram_width ? "word" : "byte",
- ram_split[config.u.ram_split],
- config.u.autoselect ? "autoselect/" : "",
- media_tbl[config.u.xcvr].name);
- dev->if_port = config.u.xcvr;
- vp->default_media = config.u.xcvr;
- vp->autoselect = config.u.autoselect;
+ 8 << config & Ram_size,
+ config & Ram_width ? "word" : "byte",
+ ram_split[(config & Ram_split) >> Ram_split_shift],
+ config & Autoselect ? "autoselect/" : "",
+ media_tbl[(config & Xcvr) >> Xcvr_shift].name);
+ vp->default_media = (config & Xcvr) >> Xcvr_shift;
+ vp->autoselect = config & Autoselect ? 1 : 0;
+ dev->if_port = vp->default_media;
}
if (vp->media_override != 7) {
printk(KERN_INFO " Media override to transceiver type %d (%s).\n",
@@ -694,14 +696,14 @@ static int corkscrew_open(struct net_device *dev)
{
int ioaddr = dev->base_addr;
struct corkscrew_private *vp = netdev_priv(dev);
- union wn3_config config;
+ __u32 config;
int i;
/* Before initializing select the active media port. */
EL3WINDOW(3);
if (vp->full_duplex)
outb(0x20, ioaddr + Wn3_MAC_Ctrl); /* Set the full-duplex bit. */
- config.i = inl(ioaddr + Wn3_Config);
+ config = inl(ioaddr + Wn3_Config);
if (vp->media_override != 7) {
if (corkscrew_debug > 1)
@@ -727,12 +729,12 @@ static int corkscrew_open(struct net_device *dev)
} else
dev->if_port = vp->default_media;
- config.u.xcvr = dev->if_port;
- outl(config.i, ioaddr + Wn3_Config);
+ config = (config & ~Xcvr) | (dev->if_port << Xcvr_shift);
+ outl(config, ioaddr + Wn3_Config);
if (corkscrew_debug > 1) {
printk("%s: corkscrew_open() InternalConfig %8.8x.\n",
- dev->name, config.i);
+ dev->name, config);
}
outw(TxReset, ioaddr + EL3_CMD);
@@ -901,7 +903,7 @@ static void corkscrew_timer(unsigned long data)
ok = 1;
}
if (!ok) {
- union wn3_config config;
+ __u32 config;
do {
dev->if_port =
@@ -928,9 +930,9 @@ static void corkscrew_timer(unsigned long data)
ioaddr + Wn4_Media);
EL3WINDOW(3);
- config.i = inl(ioaddr + Wn3_Config);
- config.u.xcvr = dev->if_port;
- outl(config.i, ioaddr + Wn3_Config);
+ config = inl(ioaddr + Wn3_Config);
+ config = (config & ~Xcvr) | (dev->if_port << Xcvr_shift);
+ outl(config, ioaddr + Wn3_Config);
outw(dev->if_port == 3 ? StartCoax : StopCoax,
ioaddr + EL3_CMD);
OpenPOWER on IntegriCloud