summaryrefslogtreecommitdiffstats
path: root/drivers/net/3c503.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/net/3c503.c
downloadop-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip
op-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/net/3c503.c')
-rw-r--r--drivers/net/3c503.c747
1 files changed, 747 insertions, 0 deletions
diff --git a/drivers/net/3c503.c b/drivers/net/3c503.c
new file mode 100644
index 0000000..29dfd47
--- /dev/null
+++ b/drivers/net/3c503.c
@@ -0,0 +1,747 @@
+/* 3c503.c: A shared-memory NS8390 ethernet driver for linux. */
+/*
+ Written 1992-94 by Donald Becker.
+
+ Copyright 1993 United States Government as represented by the
+ Director, National Security Agency. This software may be used and
+ distributed according to the terms of the GNU General Public License,
+ incorporated herein by reference.
+
+ The author may be reached as becker@scyld.com, or C/O
+ Scyld Computing Corporation
+ 410 Severn Ave., Suite 210
+ Annapolis MD 21403
+
+
+ This driver should work with the 3c503 and 3c503/16. It should be used
+ in shared memory mode for best performance, although it may also work
+ in programmed-I/O mode.
+
+ Sources:
+ EtherLink II Technical Reference Manual,
+ EtherLink II/16 Technical Reference Manual Supplement,
+ 3Com Corporation, 5400 Bayfront Plaza, Santa Clara CA 95052-8145
+
+ The Crynwr 3c503 packet driver.
+
+ Changelog:
+
+ Paul Gortmaker : add support for the 2nd 8kB of RAM on 16 bit cards.
+ Paul Gortmaker : multiple card support for module users.
+ rjohnson@analogic.com : Fix up PIO interface for efficient operation.
+ Jeff Garzik : ethtool support
+
+*/
+
+#define DRV_NAME "3c503"
+#define DRV_VERSION "1.10a"
+#define DRV_RELDATE "11/17/2001"
+
+
+static const char version[] =
+ DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE " Donald Becker (becker@scyld.com)\n";
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/init.h>
+#include <linux/ethtool.h>
+
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/byteorder.h>
+
+#include "8390.h"
+#include "3c503.h"
+#define WRD_COUNT 4
+
+static int el2_pio_probe(struct net_device *dev);
+static int el2_probe1(struct net_device *dev, int ioaddr);
+
+/* A zero-terminated list of I/O addresses to be probed in PIO mode. */
+static unsigned int netcard_portlist[] __initdata =
+ { 0x300,0x310,0x330,0x350,0x250,0x280,0x2a0,0x2e0,0};
+
+#define EL2_IO_EXTENT 16
+
+static int el2_open(struct net_device *dev);
+static int el2_close(struct net_device *dev);
+static void el2_reset_8390(struct net_device *dev);
+static void el2_init_card(struct net_device *dev);
+static void el2_block_output(struct net_device *dev, int count,
+ const unsigned char *buf, int start_page);
+static void el2_block_input(struct net_device *dev, int count, struct sk_buff *skb,
+ int ring_offset);
+static void el2_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr,
+ int ring_page);
+static struct ethtool_ops netdev_ethtool_ops;
+
+
+/* This routine probes for a memory-mapped 3c503 board by looking for
+ the "location register" at the end of the jumpered boot PROM space.
+ This works even if a PROM isn't there.
+
+ If the ethercard isn't found there is an optional probe for
+ ethercard jumpered to programmed-I/O mode.
+ */
+static int __init do_el2_probe(struct net_device *dev)
+{
+ int *addr, addrs[] = { 0xddffe, 0xd9ffe, 0xcdffe, 0xc9ffe, 0};
+ int base_addr = dev->base_addr;
+ int irq = dev->irq;
+
+ SET_MODULE_OWNER(dev);
+
+ if (base_addr > 0x1ff) /* Check a single specified location. */
+ return el2_probe1(dev, base_addr);
+ else if (base_addr != 0) /* Don't probe at all. */
+ return -ENXIO;
+
+ for (addr = addrs; *addr; addr++) {
+ void __iomem *p = ioremap(*addr, 1);
+ unsigned base_bits;
+ int i;
+
+ if (!p)
+ continue;
+ base_bits = readb(p);
+ iounmap(p);
+ i = ffs(base_bits) - 1;
+ if (i == -1 || base_bits != (1 << i))
+ continue;
+ if (el2_probe1(dev, netcard_portlist[i]) == 0)
+ return 0;
+ dev->irq = irq;
+ }
+#if ! defined(no_probe_nonshared_memory)
+ return el2_pio_probe(dev);
+#else
+ return -ENODEV;
+#endif
+}
+
+/* Try all of the locations that aren't obviously empty. This touches
+ a lot of locations, and is much riskier than the code above. */
+static int __init
+el2_pio_probe(struct net_device *dev)
+{
+ int i;
+ int base_addr = dev->base_addr;
+ int irq = dev->irq;
+
+ if (base_addr > 0x1ff) /* Check a single specified location. */
+ return el2_probe1(dev, base_addr);
+ else if (base_addr != 0) /* Don't probe at all. */
+ return -ENXIO;
+
+ for (i = 0; netcard_portlist[i]; i++) {
+ if (el2_probe1(dev, netcard_portlist[i]) == 0)
+ return 0;
+ dev->irq = irq;
+ }
+
+ return -ENODEV;
+}
+
+static void cleanup_card(struct net_device *dev)
+{
+ /* NB: el2_close() handles free_irq */
+ release_region(dev->base_addr, EL2_IO_EXTENT);
+ if (ei_status.mem)
+ iounmap(ei_status.mem);
+}
+
+#ifndef MODULE
+struct net_device * __init el2_probe(int unit)
+{
+ struct net_device *dev = alloc_ei_netdev();
+ int err;
+
+ if (!dev)
+ return ERR_PTR(-ENOMEM);
+
+ sprintf(dev->name, "eth%d", unit);
+ netdev_boot_setup_check(dev);
+
+ err = do_el2_probe(dev);
+ if (err)
+ goto out;
+ err = register_netdev(dev);
+ if (err)
+ goto out1;
+ return dev;
+out1:
+ cleanup_card(dev);
+out:
+ free_netdev(dev);
+ return ERR_PTR(err);
+}
+#endif
+
+/* Probe for the Etherlink II card at I/O port base IOADDR,
+ returning non-zero on success. If found, set the station
+ address and memory parameters in DEVICE. */
+static int __init
+el2_probe1(struct net_device *dev, int ioaddr)
+{
+ int i, iobase_reg, membase_reg, saved_406, wordlength, retval;
+ static unsigned version_printed;
+ unsigned long vendor_id;
+
+ if (!request_region(ioaddr, EL2_IO_EXTENT, DRV_NAME))
+ return -EBUSY;
+
+ if (!request_region(ioaddr + 0x400, 8, DRV_NAME)) {
+ retval = -EBUSY;
+ goto out;
+ }
+
+ /* Reset and/or avoid any lurking NE2000 */
+ if (inb(ioaddr + 0x408) == 0xff) {
+ mdelay(1);
+ retval = -ENODEV;
+ goto out1;
+ }
+
+ /* We verify that it's a 3C503 board by checking the first three octets
+ of its ethernet address. */
+ iobase_reg = inb(ioaddr+0x403);
+ membase_reg = inb(ioaddr+0x404);
+ /* ASIC location registers should be 0 or have only a single bit set. */
+ if ( (iobase_reg & (iobase_reg - 1))
+ || (membase_reg & (membase_reg - 1))) {
+ retval = -ENODEV;
+ goto out1;
+ }
+ saved_406 = inb_p(ioaddr + 0x406);
+ outb_p(ECNTRL_RESET|ECNTRL_THIN, ioaddr + 0x406); /* Reset it... */
+ outb_p(ECNTRL_THIN, ioaddr + 0x406);
+ /* Map the station addr PROM into the lower I/O ports. We now check
+ for both the old and new 3Com prefix */
+ outb(ECNTRL_SAPROM|ECNTRL_THIN, ioaddr + 0x406);
+ vendor_id = inb(ioaddr)*0x10000 + inb(ioaddr + 1)*0x100 + inb(ioaddr + 2);
+ if ((vendor_id != OLD_3COM_ID) && (vendor_id != NEW_3COM_ID)) {
+ /* Restore the register we frobbed. */
+ outb(saved_406, ioaddr + 0x406);
+ retval = -ENODEV;
+ goto out1;
+ }
+
+ if (ei_debug && version_printed++ == 0)
+ printk(version);
+
+ dev->base_addr = ioaddr;
+
+ printk("%s: 3c503 at i/o base %#3x, node ", dev->name, ioaddr);
+
+ /* Retrieve and print the ethernet address. */
+ for (i = 0; i < 6; i++)
+ printk(" %2.2x", dev->dev_addr[i] = inb(ioaddr + i));
+
+ /* Map the 8390 back into the window. */
+ outb(ECNTRL_THIN, ioaddr + 0x406);
+
+ /* Check for EL2/16 as described in tech. man. */
+ outb_p(E8390_PAGE0, ioaddr + E8390_CMD);
+ outb_p(0, ioaddr + EN0_DCFG);
+ outb_p(E8390_PAGE2, ioaddr + E8390_CMD);
+ wordlength = inb_p(ioaddr + EN0_DCFG) & ENDCFG_WTS;
+ outb_p(E8390_PAGE0, ioaddr + E8390_CMD);
+
+ /* Probe for, turn on and clear the board's shared memory. */
+ if (ei_debug > 2) printk(" memory jumpers %2.2x ", membase_reg);
+ outb(EGACFR_NORM, ioaddr + 0x405); /* Enable RAM */
+
+ /* This should be probed for (or set via an ioctl()) at run-time.
+ Right now we use a sleazy hack to pass in the interface number
+ at boot-time via the low bits of the mem_end field. That value is
+ unused, and the low bits would be discarded even if it was used. */
+#if defined(EI8390_THICK) || defined(EL2_AUI)
+ ei_status.interface_num = 1;
+#else
+ ei_status.interface_num = dev->mem_end & 0xf;
+#endif
+ printk(", using %sternal xcvr.\n", ei_status.interface_num == 0 ? "in" : "ex");
+
+ if ((membase_reg & 0xf0) == 0) {
+ dev->mem_start = 0;
+ ei_status.name = "3c503-PIO";
+ ei_status.mem = NULL;
+ } else {
+ dev->mem_start = ((membase_reg & 0xc0) ? 0xD8000 : 0xC8000) +
+ ((membase_reg & 0xA0) ? 0x4000 : 0);
+#define EL2_MEMSIZE (EL2_MB1_STOP_PG - EL2_MB1_START_PG)*256
+ ei_status.mem = ioremap(dev->mem_start, EL2_MEMSIZE);
+
+#ifdef EL2MEMTEST
+ /* This has never found an error, but someone might care.
+ Note that it only tests the 2nd 8kB on 16kB 3c503/16
+ cards between card addr. 0x2000 and 0x3fff. */
+ { /* Check the card's memory. */
+ void __iomem *mem_base = ei_status.mem;
+ unsigned int test_val = 0xbbadf00d;
+ writel(0xba5eba5e, mem_base);
+ for (i = sizeof(test_val); i < EL2_MEMSIZE; i+=sizeof(test_val)) {
+ writel(test_val, mem_base + i);
+ if (readl(mem_base) != 0xba5eba5e
+ || readl(mem_base + i) != test_val) {
+ printk("3c503: memory failure or memory address conflict.\n");
+ dev->mem_start = 0;
+ ei_status.name = "3c503-PIO";
+ iounmap(mem_base);
+ ei_status.mem = NULL;
+ break;
+ }
+ test_val += 0x55555555;
+ writel(0, mem_base + i);
+ }
+ }
+#endif /* EL2MEMTEST */
+
+ if (dev->mem_start)
+ dev->mem_end = dev->mem_start + EL2_MEMSIZE;
+
+ if (wordlength) { /* No Tx pages to skip over to get to Rx */
+ ei_status.priv = 0;
+ ei_status.name = "3c503/16";
+ } else {
+ ei_status.priv = TX_PAGES * 256;
+ ei_status.name = "3c503";
+ }
+ }
+
+ /*
+ Divide up the memory on the card. This is the same regardless of
+ whether shared-mem or PIO is used. For 16 bit cards (16kB RAM),
+ we use the entire 8k of bank1 for an Rx ring. We only use 3k
+ of the bank0 for 2 full size Tx packet slots. For 8 bit cards,
+ (8kB RAM) we use 3kB of bank1 for two Tx slots, and the remaining
+ 5kB for an Rx ring. */
+
+ if (wordlength) {
+ ei_status.tx_start_page = EL2_MB0_START_PG;
+ ei_status.rx_start_page = EL2_MB1_START_PG;
+ } else {
+ ei_status.tx_start_page = EL2_MB1_START_PG;
+ ei_status.rx_start_page = EL2_MB1_START_PG + TX_PAGES;
+ }
+
+ /* Finish setting the board's parameters. */
+ ei_status.stop_page = EL2_MB1_STOP_PG;
+ ei_status.word16 = wordlength;
+ ei_status.reset_8390 = &el2_reset_8390;
+ ei_status.get_8390_hdr = &el2_get_8390_hdr;
+ ei_status.block_input = &el2_block_input;
+ ei_status.block_output = &el2_block_output;
+
+ if (dev->irq == 2)
+ dev->irq = 9;
+ else if (dev->irq > 5 && dev->irq != 9) {
+ printk("3c503: configured interrupt %d invalid, will use autoIRQ.\n",
+ dev->irq);
+ dev->irq = 0;
+ }
+
+ ei_status.saved_irq = dev->irq;
+
+ dev->open = &el2_open;
+ dev->stop = &el2_close;
+ dev->ethtool_ops = &netdev_ethtool_ops;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ dev->poll_controller = ei_poll;
+#endif
+
+ if (dev->mem_start)
+ printk("%s: %s - %dkB RAM, 8kB shared mem window at %#6lx-%#6lx.\n",
+ dev->name, ei_status.name, (wordlength+1)<<3,
+ dev->mem_start, dev->mem_end-1);
+
+ else
+ {
+ ei_status.tx_start_page = EL2_MB1_START_PG;
+ ei_status.rx_start_page = EL2_MB1_START_PG + TX_PAGES;
+ printk("\n%s: %s, %dkB RAM, using programmed I/O (REJUMPER for SHARED MEMORY).\n",
+ dev->name, ei_status.name, (wordlength+1)<<3);
+ }
+ release_region(ioaddr + 0x400, 8);
+ return 0;
+out1:
+ release_region(ioaddr + 0x400, 8);
+out:
+ release_region(ioaddr, EL2_IO_EXTENT);
+ return retval;
+}
+
+static int
+el2_open(struct net_device *dev)
+{
+ int retval = -EAGAIN;
+
+ if (dev->irq < 2) {
+ int irqlist[] = {5, 9, 3, 4, 0};
+ int *irqp = irqlist;
+
+ outb(EGACFR_NORM, E33G_GACFR); /* Enable RAM and interrupts. */
+ do {
+ if (request_irq (*irqp, NULL, 0, "bogus", dev) != -EBUSY) {
+ /* Twinkle the interrupt, and check if it's seen. */
+ unsigned long cookie = probe_irq_on();
+ outb_p(0x04 << ((*irqp == 9) ? 2 : *irqp), E33G_IDCFR);
+ outb_p(0x00, E33G_IDCFR);
+ if (*irqp == probe_irq_off(cookie) /* It's a good IRQ line! */
+ && ((retval = request_irq(dev->irq = *irqp,
+ ei_interrupt, 0, dev->name, dev)) == 0))
+ break;
+ }
+ } while (*++irqp);
+ if (*irqp == 0) {
+ outb(EGACFR_IRQOFF, E33G_GACFR); /* disable interrupts. */
+ return retval;
+ }
+ } else {
+ if ((retval = request_irq(dev->irq, ei_interrupt, 0, dev->name, dev))) {
+ return retval;
+ }
+ }
+
+ el2_init_card(dev);
+ ei_open(dev);
+ return 0;
+}
+
+static int
+el2_close(struct net_device *dev)
+{
+ free_irq(dev->irq, dev);
+ dev->irq = ei_status.saved_irq;
+ outb(EGACFR_IRQOFF, E33G_GACFR); /* disable interrupts. */
+
+ ei_close(dev);
+ return 0;
+}
+
+/* This is called whenever we have a unrecoverable failure:
+ transmit timeout
+ Bad ring buffer packet header
+ */
+static void
+el2_reset_8390(struct net_device *dev)
+{
+ if (ei_debug > 1) {
+ printk("%s: Resetting the 3c503 board...", dev->name);
+ printk("%#lx=%#02x %#lx=%#02x %#lx=%#02x...", E33G_IDCFR, inb(E33G_IDCFR),
+ E33G_CNTRL, inb(E33G_CNTRL), E33G_GACFR, inb(E33G_GACFR));
+ }
+ outb_p(ECNTRL_RESET|ECNTRL_THIN, E33G_CNTRL);
+ ei_status.txing = 0;
+ outb_p(ei_status.interface_num==0 ? ECNTRL_THIN : ECNTRL_AUI, E33G_CNTRL);
+ el2_init_card(dev);
+ if (ei_debug > 1) printk("done\n");
+}
+
+/* Initialize the 3c503 GA registers after a reset. */
+static void
+el2_init_card(struct net_device *dev)
+{
+ /* Unmap the station PROM and select the DIX or BNC connector. */
+ outb_p(ei_status.interface_num==0 ? ECNTRL_THIN : ECNTRL_AUI, E33G_CNTRL);
+
+ /* Set ASIC copy of rx's first and last+1 buffer pages */
+ /* These must be the same as in the 8390. */
+ outb(ei_status.rx_start_page, E33G_STARTPG);
+ outb(ei_status.stop_page, E33G_STOPPG);
+
+ /* Point the vector pointer registers somewhere ?harmless?. */
+ outb(0xff, E33G_VP2); /* Point at the ROM restart location 0xffff0 */
+ outb(0xff, E33G_VP1);
+ outb(0x00, E33G_VP0);
+ /* Turn off all interrupts until we're opened. */
+ outb_p(0x00, dev->base_addr + EN0_IMR);
+ /* Enable IRQs iff started. */
+ outb(EGACFR_NORM, E33G_GACFR);
+
+ /* Set the interrupt line. */
+ outb_p((0x04 << (dev->irq == 9 ? 2 : dev->irq)), E33G_IDCFR);
+ outb_p((WRD_COUNT << 1), E33G_DRQCNT); /* Set burst size to 8 */
+ outb_p(0x20, E33G_DMAAH); /* Put a valid addr in the GA DMA */
+ outb_p(0x00, E33G_DMAAL);
+ return; /* We always succeed */
+}
+
+/*
+ * Either use the shared memory (if enabled on the board) or put the packet
+ * out through the ASIC FIFO.
+ */
+static void
+el2_block_output(struct net_device *dev, int count,
+ const unsigned char *buf, int start_page)
+{
+ unsigned short int *wrd;
+ int boguscount; /* timeout counter */
+ unsigned short word; /* temporary for better machine code */
+ void __iomem *base = ei_status.mem;
+
+ if (ei_status.word16) /* Tx packets go into bank 0 on EL2/16 card */
+ outb(EGACFR_RSEL|EGACFR_TCM, E33G_GACFR);
+ else
+ outb(EGACFR_NORM, E33G_GACFR);
+
+ if (base) { /* Shared memory transfer */
+ memcpy_toio(base + ((start_page - ei_status.tx_start_page) << 8),
+ buf, count);
+ outb(EGACFR_NORM, E33G_GACFR); /* Back to bank1 in case on bank0 */
+ return;
+ }
+
+/*
+ * No shared memory, put the packet out the other way.
+ * Set up then start the internal memory transfer to Tx Start Page
+ */
+
+ word = (unsigned short)start_page;
+ outb(word&0xFF, E33G_DMAAH);
+ outb(word>>8, E33G_DMAAL);
+
+ outb_p((ei_status.interface_num ? ECNTRL_AUI : ECNTRL_THIN ) | ECNTRL_OUTPUT
+ | ECNTRL_START, E33G_CNTRL);
+
+/*
+ * Here I am going to write data to the FIFO as quickly as possible.
+ * Note that E33G_FIFOH is defined incorrectly. It is really
+ * E33G_FIFOL, the lowest port address for both the byte and
+ * word write. Variable 'count' is NOT checked. Caller must supply a
+ * valid count. Note that I may write a harmless extra byte to the
+ * 8390 if the byte-count was not even.
+ */
+ wrd = (unsigned short int *) buf;
+ count = (count + 1) >> 1;
+ for(;;)
+ {
+ boguscount = 0x1000;
+ while ((inb(E33G_STATUS) & ESTAT_DPRDY) == 0)
+ {
+ if(!boguscount--)
+ {
+ printk("%s: FIFO blocked in el2_block_output.\n", dev->name);
+ el2_reset_8390(dev);
+ goto blocked;
+ }
+ }
+ if(count > WRD_COUNT)
+ {
+ outsw(E33G_FIFOH, wrd, WRD_COUNT);
+ wrd += WRD_COUNT;
+ count -= WRD_COUNT;
+ }
+ else
+ {
+ outsw(E33G_FIFOH, wrd, count);
+ break;
+ }
+ }
+ blocked:;
+ outb_p(ei_status.interface_num==0 ? ECNTRL_THIN : ECNTRL_AUI, E33G_CNTRL);
+ return;
+}
+
+/* Read the 4 byte, page aligned 8390 specific header. */
+static void
+el2_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page)
+{
+ int boguscount;
+ void __iomem *base = ei_status.mem;
+ unsigned short word;
+
+ if (base) { /* Use the shared memory. */
+ void __iomem *hdr_start = base + ((ring_page - EL2_MB1_START_PG)<<8);
+ memcpy_fromio(hdr, hdr_start, sizeof(struct e8390_pkt_hdr));
+ hdr->count = le16_to_cpu(hdr->count);
+ return;
+ }
+
+/*
+ * No shared memory, use programmed I/O.
+ */
+
+ word = (unsigned short)ring_page;
+ outb(word&0xFF, E33G_DMAAH);
+ outb(word>>8, E33G_DMAAL);
+
+ outb_p((ei_status.interface_num == 0 ? ECNTRL_THIN : ECNTRL_AUI) | ECNTRL_INPUT
+ | ECNTRL_START, E33G_CNTRL);
+ boguscount = 0x1000;
+ while ((inb(E33G_STATUS) & ESTAT_DPRDY) == 0)
+ {
+ if(!boguscount--)
+ {
+ printk("%s: FIFO blocked in el2_get_8390_hdr.\n", dev->name);
+ memset(hdr, 0x00, sizeof(struct e8390_pkt_hdr));
+ el2_reset_8390(dev);
+ goto blocked;
+ }
+ }
+ insw(E33G_FIFOH, hdr, (sizeof(struct e8390_pkt_hdr))>> 1);
+ blocked:;
+ outb_p(ei_status.interface_num == 0 ? ECNTRL_THIN : ECNTRL_AUI, E33G_CNTRL);
+}
+
+
+static void
+el2_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset)
+{
+ int boguscount = 0;
+ void __iomem *base = ei_status.mem;
+ unsigned short int *buf;
+ unsigned short word;
+
+ /* Maybe enable shared memory just be to be safe... nahh.*/
+ if (base) { /* Use the shared memory. */
+ ring_offset -= (EL2_MB1_START_PG<<8);
+ if (ring_offset + count > EL2_MEMSIZE) {
+ /* We must wrap the input move. */
+ int semi_count = EL2_MEMSIZE - ring_offset;
+ memcpy_fromio(skb->data, base + ring_offset, semi_count);
+ count -= semi_count;
+ memcpy_fromio(skb->data + semi_count, base + ei_status.priv, count);
+ } else {
+ /* Packet is in one chunk -- we can copy + cksum. */
+ eth_io_copy_and_sum(skb, base + ring_offset, count, 0);
+ }
+ return;
+ }
+
+/*
+ * No shared memory, use programmed I/O.
+ */
+ word = (unsigned short) ring_offset;
+ outb(word>>8, E33G_DMAAH);
+ outb(word&0xFF, E33G_DMAAL);
+
+ outb_p((ei_status.interface_num == 0 ? ECNTRL_THIN : ECNTRL_AUI) | ECNTRL_INPUT
+ | ECNTRL_START, E33G_CNTRL);
+
+/*
+ * Here I also try to get data as fast as possible. I am betting that I
+ * can read one extra byte without clobbering anything in the kernel because
+ * this would only occur on an odd byte-count and allocation of skb->data
+ * is word-aligned. Variable 'count' is NOT checked. Caller must check
+ * for a valid count.
+ * [This is currently quite safe.... but if one day the 3c503 explodes
+ * you know where to come looking ;)]
+ */
+
+ buf = (unsigned short int *) skb->data;
+ count = (count + 1) >> 1;
+ for(;;)
+ {
+ boguscount = 0x1000;
+ while ((inb(E33G_STATUS) & ESTAT_DPRDY) == 0)
+ {
+ if(!boguscount--)
+ {
+ printk("%s: FIFO blocked in el2_block_input.\n", dev->name);
+ el2_reset_8390(dev);
+ goto blocked;
+ }
+ }
+ if(count > WRD_COUNT)
+ {
+ insw(E33G_FIFOH, buf, WRD_COUNT);
+ buf += WRD_COUNT;
+ count -= WRD_COUNT;
+ }
+ else
+ {
+ insw(E33G_FIFOH, buf, count);
+ break;
+ }
+ }
+ blocked:;
+ outb_p(ei_status.interface_num == 0 ? ECNTRL_THIN : ECNTRL_AUI, E33G_CNTRL);
+ return;
+}
+
+
+static void netdev_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ strcpy(info->driver, DRV_NAME);
+ strcpy(info->version, DRV_VERSION);
+ sprintf(info->bus_info, "ISA 0x%lx", dev->base_addr);
+}
+
+static struct ethtool_ops netdev_ethtool_ops = {
+ .get_drvinfo = netdev_get_drvinfo,
+};
+
+#ifdef MODULE
+#define MAX_EL2_CARDS 4 /* Max number of EL2 cards per module */
+
+static struct net_device *dev_el2[MAX_EL2_CARDS];
+static int io[MAX_EL2_CARDS];
+static int irq[MAX_EL2_CARDS];
+static int xcvr[MAX_EL2_CARDS]; /* choose int. or ext. xcvr */
+module_param_array(io, int, NULL, 0);
+module_param_array(irq, int, NULL, 0);
+module_param_array(xcvr, int, NULL, 0);
+MODULE_PARM_DESC(io, "I/O base address(es)");
+MODULE_PARM_DESC(irq, "IRQ number(s) (assigned)");
+MODULE_PARM_DESC(xcvr, "transceiver(s) (0=internal, 1=external)");
+MODULE_DESCRIPTION("3Com ISA EtherLink II, II/16 (3c503, 3c503/16) driver");
+MODULE_LICENSE("GPL");
+
+/* This is set up so that only a single autoprobe takes place per call.
+ISA device autoprobes on a running machine are not recommended. */
+int
+init_module(void)
+{
+ struct net_device *dev;
+ int this_dev, found = 0;
+
+ for (this_dev = 0; this_dev < MAX_EL2_CARDS; this_dev++) {
+ if (io[this_dev] == 0) {
+ if (this_dev != 0) break; /* only autoprobe 1st one */
+ printk(KERN_NOTICE "3c503.c: Presently autoprobing (not recommended) for a single card.\n");
+ }
+ dev = alloc_ei_netdev();
+ if (!dev)
+ break;
+ dev->irq = irq[this_dev];
+ dev->base_addr = io[this_dev];
+ dev->mem_end = xcvr[this_dev]; /* low 4bits = xcvr sel. */
+ if (do_el2_probe(dev) == 0) {
+ if (register_netdev(dev) == 0) {
+ dev_el2[found++] = dev;
+ continue;
+ }
+ cleanup_card(dev);
+ }
+ free_netdev(dev);
+ printk(KERN_WARNING "3c503.c: No 3c503 card found (i/o = 0x%x).\n", io[this_dev]);
+ break;
+ }
+ if (found)
+ return 0;
+ return -ENXIO;
+}
+
+void
+cleanup_module(void)
+{
+ int this_dev;
+
+ for (this_dev = 0; this_dev < MAX_EL2_CARDS; this_dev++) {
+ struct net_device *dev = dev_el2[this_dev];
+ if (dev) {
+ unregister_netdev(dev);
+ cleanup_card(dev);
+ free_netdev(dev);
+ }
+ }
+}
+#endif /* MODULE */
OpenPOWER on IntegriCloud