diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2012-06-01 16:55:42 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2012-06-01 16:55:42 -0700 |
commit | f5e7e844a571124ffc117d4696787d6afc4fc5ae (patch) | |
tree | 26bb17dc94e9536da540c187b00cedb0c1b24664 /drivers/mtd | |
parent | 48445159e9ecb44a96a4de06c6ae7c54eb43ba5b (diff) | |
parent | 4a43faf54e9173b6acce37cf7f053fc9515a2cdf (diff) | |
download | op-kernel-dev-f5e7e844a571124ffc117d4696787d6afc4fc5ae.zip op-kernel-dev-f5e7e844a571124ffc117d4696787d6afc4fc5ae.tar.gz |
Merge tag 'for-linus-3.5-20120601' of git://git.infradead.org/linux-mtd
Pull mtd update from David Woodhouse:
- More robust parsing especially of xattr data in JFFS2
- Updates to mxc_nand and gpmi drivers to support new boards and device tree
- Improve consistency of information about ECC strength in NAND devices
- Clean up partition handling of plat_nand
- Support NAND drivers without dedicated access to OOB area
- BCH hardware ECC support for OMAP
- Other fixes and cleanups, and a few new device IDs
Fixed trivial conflict in drivers/mtd/nand/gpmi-nand/gpmi-nand.c due to
added include files next to each other.
* tag 'for-linus-3.5-20120601' of git://git.infradead.org/linux-mtd: (75 commits)
mtd: mxc_nand: move ecc strengh setup before nand_scan_tail
mtd: block2mtd: fix recursive call of mtd_writev
mtd: gpmi-nand: define ecc.strength
mtd: of_parts: fix breakage in Kconfig
mtd: nand: fix scan_read_raw_oob
mtd: docg3 fix in-middle of blocks reads
mtd: cfi_cmdset_0002: Slight cleanup of fixup messages
mtd: add fixup for S29NS512P NOR flash.
jffs2: allow to complete xattr integrity check on first GC scan
jffs2: allow to discriminate between recoverable and non-recoverable errors
mtd: nand: omap: add support for hardware BCH ecc
ARM: OMAP3: gpmc: add BCH ecc api and modes
mtd: nand: check the return code of 'read_oob/read_oob_raw'
mtd: nand: remove 'sndcmd' parameter of 'read_oob/read_oob_raw'
mtd: m25p80: Add support for Winbond W25Q80BW
jffs2: get rid of jffs2_sync_super
jffs2: remove unnecessary GC pass on sync
jffs2: remove unnecessary GC pass on umount
jffs2: remove lock_super
mtd: gpmi: add gpmi support for mx6q
...
Diffstat (limited to 'drivers/mtd')
50 files changed, 1342 insertions, 704 deletions
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig index 5760c1a..27143e0 100644 --- a/drivers/mtd/Kconfig +++ b/drivers/mtd/Kconfig @@ -128,7 +128,7 @@ config MTD_AFS_PARTS config MTD_OF_PARTS tristate "OpenFirmware partitioning information support" - default Y + default y depends on OF help This provides a partition parsing function which derives diff --git a/drivers/mtd/bcm63xxpart.c b/drivers/mtd/bcm63xxpart.c index 608321e..63d2a64 100644 --- a/drivers/mtd/bcm63xxpart.c +++ b/drivers/mtd/bcm63xxpart.c @@ -4,7 +4,7 @@ * Copyright © 2006-2008 Florian Fainelli <florian@openwrt.org> * Mike Albon <malbon@openwrt.org> * Copyright © 2009-2010 Daniel Dickinson <openwrt@cshore.neomailbox.net> - * Copyright © 2011 Jonas Gorski <jonas.gorski@gmail.com> + * Copyright © 2011-2012 Jonas Gorski <jonas.gorski@gmail.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -82,6 +82,7 @@ static int bcm63xx_parse_cfe_partitions(struct mtd_info *master, int namelen = 0; int i; u32 computed_crc; + bool rootfs_first = false; if (bcm63xx_detect_cfe(master)) return -EINVAL; @@ -109,6 +110,7 @@ static int bcm63xx_parse_cfe_partitions(struct mtd_info *master, char *boardid = &(buf->board_id[0]); char *tagversion = &(buf->tag_version[0]); + sscanf(buf->flash_image_start, "%u", &rootfsaddr); sscanf(buf->kernel_address, "%u", &kerneladdr); sscanf(buf->kernel_length, "%u", &kernellen); sscanf(buf->total_length, "%u", &totallen); @@ -117,10 +119,19 @@ static int bcm63xx_parse_cfe_partitions(struct mtd_info *master, tagversion, boardid); kerneladdr = kerneladdr - BCM63XX_EXTENDED_SIZE; - rootfsaddr = kerneladdr + kernellen; + rootfsaddr = rootfsaddr - BCM63XX_EXTENDED_SIZE; spareaddr = roundup(totallen, master->erasesize) + cfelen; sparelen = master->size - spareaddr - nvramlen; - rootfslen = spareaddr - rootfsaddr; + + if (rootfsaddr < kerneladdr) { + /* default Broadcom layout */ + rootfslen = kerneladdr - rootfsaddr; + rootfs_first = true; + } else { + /* OpenWrt layout */ + rootfsaddr = kerneladdr + kernellen; + rootfslen = spareaddr - rootfsaddr; + } } else { pr_warn("CFE boot tag CRC invalid (expected %08x, actual %08x)\n", buf->header_crc, computed_crc); @@ -156,18 +167,26 @@ static int bcm63xx_parse_cfe_partitions(struct mtd_info *master, curpart++; if (kernellen > 0) { - parts[curpart].name = "kernel"; - parts[curpart].offset = kerneladdr; - parts[curpart].size = kernellen; + int kernelpart = curpart; + + if (rootfslen > 0 && rootfs_first) + kernelpart++; + parts[kernelpart].name = "kernel"; + parts[kernelpart].offset = kerneladdr; + parts[kernelpart].size = kernellen; curpart++; } if (rootfslen > 0) { - parts[curpart].name = "rootfs"; - parts[curpart].offset = rootfsaddr; - parts[curpart].size = rootfslen; - if (sparelen > 0) - parts[curpart].size += sparelen; + int rootfspart = curpart; + + if (kernellen > 0 && rootfs_first) + rootfspart--; + parts[rootfspart].name = "rootfs"; + parts[rootfspart].offset = rootfsaddr; + parts[rootfspart].size = rootfslen; + if (sparelen > 0 && !rootfs_first) + parts[rootfspart].size += sparelen; curpart++; } diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c index d02592e..22d0493 100644 --- a/drivers/mtd/chips/cfi_cmdset_0002.c +++ b/drivers/mtd/chips/cfi_cmdset_0002.c @@ -317,7 +317,7 @@ static void fixup_s29gl064n_sectors(struct mtd_info *mtd) if ((cfi->cfiq->EraseRegionInfo[0] & 0xffff) == 0x003f) { cfi->cfiq->EraseRegionInfo[0] |= 0x0040; - pr_warning("%s: Bad S29GL064N CFI data, adjust from 64 to 128 sectors\n", mtd->name); + pr_warning("%s: Bad S29GL064N CFI data; adjust from 64 to 128 sectors\n", mtd->name); } } @@ -328,10 +328,23 @@ static void fixup_s29gl032n_sectors(struct mtd_info *mtd) if ((cfi->cfiq->EraseRegionInfo[1] & 0xffff) == 0x007e) { cfi->cfiq->EraseRegionInfo[1] &= ~0x0040; - pr_warning("%s: Bad S29GL032N CFI data, adjust from 127 to 63 sectors\n", mtd->name); + pr_warning("%s: Bad S29GL032N CFI data; adjust from 127 to 63 sectors\n", mtd->name); } } +static void fixup_s29ns512p_sectors(struct mtd_info *mtd) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + + /* + * S29NS512P flash uses more than 8bits to report number of sectors, + * which is not permitted by CFI. + */ + cfi->cfiq->EraseRegionInfo[0] = 0x020001ff; + pr_warning("%s: Bad S29NS512P CFI data; adjust to 512 sectors\n", mtd->name); +} + /* Used to fix CFI-Tables of chips without Extended Query Tables */ static struct cfi_fixup cfi_nopri_fixup_table[] = { { CFI_MFR_SST, 0x234a, fixup_sst39vf }, /* SST39VF1602 */ @@ -362,6 +375,7 @@ static struct cfi_fixup cfi_fixup_table[] = { { CFI_MFR_AMD, 0x1301, fixup_s29gl064n_sectors }, { CFI_MFR_AMD, 0x1a00, fixup_s29gl032n_sectors }, { CFI_MFR_AMD, 0x1a01, fixup_s29gl032n_sectors }, + { CFI_MFR_AMD, 0x3f00, fixup_s29ns512p_sectors }, { CFI_MFR_SST, 0x536a, fixup_sst38vf640x_sectorsize }, /* SST38VF6402 */ { CFI_MFR_SST, 0x536b, fixup_sst38vf640x_sectorsize }, /* SST38VF6401 */ { CFI_MFR_SST, 0x536c, fixup_sst38vf640x_sectorsize }, /* SST38VF6404 */ diff --git a/drivers/mtd/cmdlinepart.c b/drivers/mtd/cmdlinepart.c index ddf9ec6..4558e0f 100644 --- a/drivers/mtd/cmdlinepart.c +++ b/drivers/mtd/cmdlinepart.c @@ -70,7 +70,7 @@ struct cmdline_mtd_partition { /* mtdpart_setup() parses into here */ static struct cmdline_mtd_partition *partitions; -/* the command line passed to mtdpart_setupd() */ +/* the command line passed to mtdpart_setup() */ static char *cmdline; static int cmdline_parsed = 0; diff --git a/drivers/mtd/devices/block2mtd.c b/drivers/mtd/devices/block2mtd.c index a4a80b7..681e2ee 100644 --- a/drivers/mtd/devices/block2mtd.c +++ b/drivers/mtd/devices/block2mtd.c @@ -52,8 +52,6 @@ static int _block2mtd_erase(struct block2mtd_dev *dev, loff_t to, size_t len) while (pages) { page = page_read(mapping, index); - if (!page) - return -ENOMEM; if (IS_ERR(page)) return PTR_ERR(page); @@ -112,8 +110,6 @@ static int block2mtd_read(struct mtd_info *mtd, loff_t from, size_t len, len = len - cpylen; page = page_read(dev->blkdev->bd_inode->i_mapping, index); - if (!page) - return -ENOMEM; if (IS_ERR(page)) return PTR_ERR(page); @@ -148,8 +144,6 @@ static int _block2mtd_write(struct block2mtd_dev *dev, const u_char *buf, len = len - cpylen; page = page_read(mapping, index); - if (!page) - return -ENOMEM; if (IS_ERR(page)) return PTR_ERR(page); @@ -271,7 +265,6 @@ static struct block2mtd_dev *add_device(char *devname, int erase_size) dev->mtd.flags = MTD_CAP_RAM; dev->mtd._erase = block2mtd_erase; dev->mtd._write = block2mtd_write; - dev->mtd._writev = mtd_writev; dev->mtd._sync = block2mtd_sync; dev->mtd._read = block2mtd_read; dev->mtd.priv = dev; diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c index 50aa90a..f70854d 100644 --- a/drivers/mtd/devices/docg3.c +++ b/drivers/mtd/devices/docg3.c @@ -227,7 +227,7 @@ static void doc_read_data_area(struct docg3 *docg3, void *buf, int len, u8 data8, *dst8; doc_dbg("doc_read_data_area(buf=%p, len=%d)\n", buf, len); - cdr = len & 0x3; + cdr = len & 0x1; len4 = len - cdr; if (first) @@ -732,12 +732,24 @@ err: * @len: the number of bytes to be read (must be a multiple of 4) * @buf: the buffer to be filled in (or NULL is forget bytes) * @first: 1 if first time read, DOC_READADDRESS should be set + * @last_odd: 1 if last read ended up on an odd byte + * + * Reads bytes from a prepared page. There is a trickery here : if the last read + * ended up on an odd offset in the 1024 bytes double page, ie. between the 2 + * planes, the first byte must be read apart. If a word (16bit) read was used, + * the read would return the byte of plane 2 as low *and* high endian, which + * will mess the read. * */ static int doc_read_page_getbytes(struct docg3 *docg3, int len, u_char *buf, - int first) + int first, int last_odd) { - doc_read_data_area(docg3, buf, len, first); + if (last_odd && len > 0) { + doc_read_data_area(docg3, buf, 1, first); + doc_read_data_area(docg3, buf ? buf + 1 : buf, len - 1, 0); + } else { + doc_read_data_area(docg3, buf, len, first); + } doc_delay(docg3, 2); return len; } @@ -850,6 +862,7 @@ static int doc_read_oob(struct mtd_info *mtd, loff_t from, u8 *buf = ops->datbuf; size_t len, ooblen, nbdata, nboob; u8 hwecc[DOC_ECC_BCH_SIZE], eccconf1; + int max_bitflips = 0; if (buf) len = ops->len; @@ -876,7 +889,7 @@ static int doc_read_oob(struct mtd_info *mtd, loff_t from, ret = 0; skip = from % DOC_LAYOUT_PAGE_SIZE; mutex_lock(&docg3->cascade->lock); - while (!ret && (len > 0 || ooblen > 0)) { + while (ret >= 0 && (len > 0 || ooblen > 0)) { calc_block_sector(from - skip, &block0, &block1, &page, &ofs, docg3->reliable); nbdata = min_t(size_t, len, DOC_LAYOUT_PAGE_SIZE - skip); @@ -887,20 +900,20 @@ static int doc_read_oob(struct mtd_info *mtd, loff_t from, ret = doc_read_page_ecc_init(docg3, DOC_ECC_BCH_TOTAL_BYTES); if (ret < 0) goto err_in_read; - ret = doc_read_page_getbytes(docg3, skip, NULL, 1); + ret = doc_read_page_getbytes(docg3, skip, NULL, 1, 0); if (ret < skip) goto err_in_read; - ret = doc_read_page_getbytes(docg3, nbdata, buf, 0); + ret = doc_read_page_getbytes(docg3, nbdata, buf, 0, skip % 2); if (ret < nbdata) goto err_in_read; doc_read_page_getbytes(docg3, DOC_LAYOUT_PAGE_SIZE - nbdata - skip, - NULL, 0); - ret = doc_read_page_getbytes(docg3, nboob, oobbuf, 0); + NULL, 0, (skip + nbdata) % 2); + ret = doc_read_page_getbytes(docg3, nboob, oobbuf, 0, 0); if (ret < nboob) goto err_in_read; doc_read_page_getbytes(docg3, DOC_LAYOUT_OOB_SIZE - nboob, - NULL, 0); + NULL, 0, nboob % 2); doc_get_bch_hw_ecc(docg3, hwecc); eccconf1 = doc_register_readb(docg3, DOC_ECCCONF1); @@ -936,7 +949,8 @@ static int doc_read_oob(struct mtd_info *mtd, loff_t from, } if (ret > 0) { mtd->ecc_stats.corrected += ret; - ret = -EUCLEAN; + max_bitflips = max(max_bitflips, ret); + ret = max_bitflips; } } @@ -1004,7 +1018,7 @@ static int doc_reload_bbt(struct docg3 *docg3) DOC_LAYOUT_PAGE_SIZE); if (!ret) doc_read_page_getbytes(docg3, DOC_LAYOUT_PAGE_SIZE, - buf, 1); + buf, 1, 0); buf += DOC_LAYOUT_PAGE_SIZE; } doc_read_page_finish(docg3); @@ -1064,10 +1078,10 @@ static int doc_get_erase_count(struct docg3 *docg3, loff_t from) ret = doc_reset_seq(docg3); if (!ret) ret = doc_read_page_prepare(docg3, block0, block1, page, - ofs + DOC_LAYOUT_WEAR_OFFSET); + ofs + DOC_LAYOUT_WEAR_OFFSET, 0); if (!ret) ret = doc_read_page_getbytes(docg3, DOC_LAYOUT_WEAR_SIZE, - buf, 1); + buf, 1, 0); doc_read_page_finish(docg3); if (ret || (buf[0] != DOC_ERASE_MARK) || (buf[2] != DOC_ERASE_MARK)) diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 1924d24..5d0d68c 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -639,12 +639,16 @@ static const struct spi_device_id m25p_ids[] = { { "en25q32b", INFO(0x1c3016, 0, 64 * 1024, 64, 0) }, { "en25p64", INFO(0x1c2017, 0, 64 * 1024, 128, 0) }, + /* Everspin */ + { "mr25h256", CAT25_INFO( 32 * 1024, 1, 256, 2) }, + /* Intel/Numonyx -- xxxs33b */ { "160s33b", INFO(0x898911, 0, 64 * 1024, 32, 0) }, { "320s33b", INFO(0x898912, 0, 64 * 1024, 64, 0) }, { "640s33b", INFO(0x898913, 0, 64 * 1024, 128, 0) }, /* Macronix */ + { "mx25l2005a", INFO(0xc22012, 0, 64 * 1024, 4, SECT_4K) }, { "mx25l4005a", INFO(0xc22013, 0, 64 * 1024, 8, SECT_4K) }, { "mx25l8005", INFO(0xc22014, 0, 64 * 1024, 16, 0) }, { "mx25l1606e", INFO(0xc22015, 0, 64 * 1024, 32, SECT_4K) }, @@ -728,6 +732,7 @@ static const struct spi_device_id m25p_ids[] = { { "w25q32", INFO(0xef4016, 0, 64 * 1024, 64, SECT_4K) }, { "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) }, { "w25q64", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) }, + { "w25q80", INFO(0xef5014, 0, 64 * 1024, 16, SECT_4K) }, /* Catalyst / On Semiconductor -- non-JEDEC */ { "cat25c11", CAT25_INFO( 16, 8, 16, 1) }, diff --git a/drivers/mtd/devices/spear_smi.c b/drivers/mtd/devices/spear_smi.c index 797d43c..6796036 100644 --- a/drivers/mtd/devices/spear_smi.c +++ b/drivers/mtd/devices/spear_smi.c @@ -990,9 +990,9 @@ static int __devinit spear_smi_probe(struct platform_device *pdev) goto err_clk; } - ret = clk_enable(dev->clk); + ret = clk_prepare_enable(dev->clk); if (ret) - goto err_clk_enable; + goto err_clk_prepare_enable; ret = request_irq(irq, spear_smi_int_handler, 0, pdev->name, dev); if (ret) { @@ -1020,8 +1020,8 @@ err_bank_setup: free_irq(irq, dev); platform_set_drvdata(pdev, NULL); err_irq: - clk_disable(dev->clk); -err_clk_enable: + clk_disable_unprepare(dev->clk); +err_clk_prepare_enable: clk_put(dev->clk); err_clk: iounmap(dev->io_base); @@ -1074,7 +1074,7 @@ static int __devexit spear_smi_remove(struct platform_device *pdev) irq = platform_get_irq(pdev, 0); free_irq(irq, dev); - clk_disable(dev->clk); + clk_disable_unprepare(dev->clk); clk_put(dev->clk); iounmap(dev->io_base); kfree(dev); @@ -1091,7 +1091,7 @@ int spear_smi_suspend(struct platform_device *pdev, pm_message_t state) struct spear_smi *dev = platform_get_drvdata(pdev); if (dev && dev->clk) - clk_disable(dev->clk); + clk_disable_unprepare(dev->clk); return 0; } @@ -1102,7 +1102,7 @@ int spear_smi_resume(struct platform_device *pdev) int ret = -EPERM; if (dev && dev->clk) - ret = clk_enable(dev->clk); + ret = clk_prepare_enable(dev->clk); if (!ret) spear_smi_hw_init(dev); diff --git a/drivers/mtd/lpddr/qinfo_probe.c b/drivers/mtd/lpddr/qinfo_probe.c index dbfe17b..45abed6 100644 --- a/drivers/mtd/lpddr/qinfo_probe.c +++ b/drivers/mtd/lpddr/qinfo_probe.c @@ -57,7 +57,7 @@ static struct qinfo_query_info qinfo_array[] = { static long lpddr_get_qinforec_pos(struct map_info *map, char *id_str) { - int qinfo_lines = sizeof(qinfo_array)/sizeof(struct qinfo_query_info); + int qinfo_lines = ARRAY_SIZE(qinfo_array); int i; int bankwidth = map_bankwidth(map) * 8; int major, minor; diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 8af67cf..5ba2458 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -224,7 +224,7 @@ config MTD_CK804XROM config MTD_SCB2_FLASH tristate "BIOS flash chip on Intel SCB2 boards" - depends on X86 && MTD_JEDECPROBE + depends on X86 && MTD_JEDECPROBE && PCI help Support for treating the BIOS flash chip on Intel SCB2 boards as an MTD device - with this you can reprogram your BIOS. diff --git a/drivers/mtd/maps/intel_vr_nor.c b/drivers/mtd/maps/intel_vr_nor.c index 92e1f41..93f0317 100644 --- a/drivers/mtd/maps/intel_vr_nor.c +++ b/drivers/mtd/maps/intel_vr_nor.c @@ -260,18 +260,7 @@ static struct pci_driver vr_nor_pci_driver = { .id_table = vr_nor_pci_ids, }; -static int __init vr_nor_mtd_init(void) -{ - return pci_register_driver(&vr_nor_pci_driver); -} - -static void __exit vr_nor_mtd_exit(void) -{ - pci_unregister_driver(&vr_nor_pci_driver); -} - -module_init(vr_nor_mtd_init); -module_exit(vr_nor_mtd_exit); +module_pci_driver(vr_nor_pci_driver); MODULE_AUTHOR("Andy Lowe"); MODULE_DESCRIPTION("MTD map driver for NOR flash on Intel Vermilion Range"); diff --git a/drivers/mtd/maps/pci.c b/drivers/mtd/maps/pci.c index 1d005a3..f14ce0a 100644 --- a/drivers/mtd/maps/pci.c +++ b/drivers/mtd/maps/pci.c @@ -352,18 +352,7 @@ static struct pci_driver mtd_pci_driver = { .id_table = mtd_pci_ids, }; -static int __init mtd_pci_maps_init(void) -{ - return pci_register_driver(&mtd_pci_driver); -} - -static void __exit mtd_pci_maps_exit(void) -{ - pci_unregister_driver(&mtd_pci_driver); -} - -module_init(mtd_pci_maps_init); -module_exit(mtd_pci_maps_exit); +module_pci_driver(mtd_pci_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>"); diff --git a/drivers/mtd/maps/scb2_flash.c b/drivers/mtd/maps/scb2_flash.c index 934a72c..9dcbc68 100644 --- a/drivers/mtd/maps/scb2_flash.c +++ b/drivers/mtd/maps/scb2_flash.c @@ -234,20 +234,7 @@ static struct pci_driver scb2_flash_driver = { .remove = __devexit_p(scb2_flash_remove), }; -static int __init -scb2_flash_init(void) -{ - return pci_register_driver(&scb2_flash_driver); -} - -static void __exit -scb2_flash_exit(void) -{ - pci_unregister_driver(&scb2_flash_driver); -} - -module_init(scb2_flash_init); -module_exit(scb2_flash_exit); +module_pci_driver(scb2_flash_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Tim Hockin <thockin@sun.com>"); diff --git a/drivers/mtd/maps/wr_sbc82xx_flash.c b/drivers/mtd/maps/wr_sbc82xx_flash.c index 71b0ba7..e7534c8 100644 --- a/drivers/mtd/maps/wr_sbc82xx_flash.c +++ b/drivers/mtd/maps/wr_sbc82xx_flash.c @@ -59,7 +59,7 @@ static struct mtd_partition bigflash_parts[] = { } }; -static const char *part_probes[] __initdata = {"cmdlinepart", "RedBoot", NULL}; +static const char *part_probes[] __initconst = {"cmdlinepart", "RedBoot", NULL}; #define init_sbc82xx_one_flash(map, br, or) \ do { \ diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index c837507..5757307 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -250,6 +250,43 @@ static ssize_t mtd_name_show(struct device *dev, } static DEVICE_ATTR(name, S_IRUGO, mtd_name_show, NULL); +static ssize_t mtd_ecc_strength_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct mtd_info *mtd = dev_get_drvdata(dev); + + return snprintf(buf, PAGE_SIZE, "%u\n", mtd->ecc_strength); +} +static DEVICE_ATTR(ecc_strength, S_IRUGO, mtd_ecc_strength_show, NULL); + +static ssize_t mtd_bitflip_threshold_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct mtd_info *mtd = dev_get_drvdata(dev); + + return snprintf(buf, PAGE_SIZE, "%u\n", mtd->bitflip_threshold); +} + +static ssize_t mtd_bitflip_threshold_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct mtd_info *mtd = dev_get_drvdata(dev); + unsigned int bitflip_threshold; + int retval; + + retval = kstrtouint(buf, 0, &bitflip_threshold); + if (retval) + return retval; + + mtd->bitflip_threshold = bitflip_threshold; + return count; +} +static DEVICE_ATTR(bitflip_threshold, S_IRUGO | S_IWUSR, + mtd_bitflip_threshold_show, + mtd_bitflip_threshold_store); + static struct attribute *mtd_attrs[] = { &dev_attr_type.attr, &dev_attr_flags.attr, @@ -260,6 +297,8 @@ static struct attribute *mtd_attrs[] = { &dev_attr_oobsize.attr, &dev_attr_numeraseregions.attr, &dev_attr_name.attr, + &dev_attr_ecc_strength.attr, + &dev_attr_bitflip_threshold.attr, NULL, }; @@ -322,6 +361,10 @@ int add_mtd_device(struct mtd_info *mtd) mtd->index = i; mtd->usecount = 0; + /* default value if not set by driver */ + if (mtd->bitflip_threshold == 0) + mtd->bitflip_threshold = mtd->ecc_strength; + if (is_power_of_2(mtd->erasesize)) mtd->erasesize_shift = ffs(mtd->erasesize) - 1; else @@ -757,12 +800,24 @@ EXPORT_SYMBOL_GPL(mtd_get_unmapped_area); int mtd_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) { + int ret_code; *retlen = 0; if (from < 0 || from > mtd->size || len > mtd->size - from) return -EINVAL; if (!len) return 0; - return mtd->_read(mtd, from, len, retlen, buf); + + /* + * In the absence of an error, drivers return a non-negative integer + * representing the maximum number of bitflips that were corrected on + * any one ecc region (if applicable; zero otherwise). + */ + ret_code = mtd->_read(mtd, from, len, retlen, buf); + if (unlikely(ret_code < 0)) + return ret_code; + if (mtd->ecc_strength == 0) + return 0; /* device lacks ecc */ + return ret_code >= mtd->bitflip_threshold ? -EUCLEAN : 0; } EXPORT_SYMBOL_GPL(mtd_read); diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c index 9651c06..d518e4d 100644 --- a/drivers/mtd/mtdpart.c +++ b/drivers/mtd/mtdpart.c @@ -67,12 +67,12 @@ static int part_read(struct mtd_info *mtd, loff_t from, size_t len, stats = part->master->ecc_stats; res = part->master->_read(part->master, from + part->offset, len, retlen, buf); - if (unlikely(res)) { - if (mtd_is_bitflip(res)) - mtd->ecc_stats.corrected += part->master->ecc_stats.corrected - stats.corrected; - if (mtd_is_eccerr(res)) - mtd->ecc_stats.failed += part->master->ecc_stats.failed - stats.failed; - } + if (unlikely(mtd_is_eccerr(res))) + mtd->ecc_stats.failed += + part->master->ecc_stats.failed - stats.failed; + else + mtd->ecc_stats.corrected += + part->master->ecc_stats.corrected - stats.corrected; return res; } @@ -517,6 +517,8 @@ static struct mtd_part *allocate_partition(struct mtd_info *master, slave->mtd.ecclayout = master->ecclayout; slave->mtd.ecc_strength = master->ecc_strength; + slave->mtd.bitflip_threshold = master->bitflip_threshold; + if (master->_block_isbad) { uint64_t offs = 0; diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 7d17cec..31bb7e5 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -115,6 +115,46 @@ config MTD_NAND_OMAP2 Support for NAND flash on Texas Instruments OMAP2, OMAP3 and OMAP4 platforms. +config MTD_NAND_OMAP_BCH + depends on MTD_NAND && MTD_NAND_OMAP2 && ARCH_OMAP3 + bool "Enable support for hardware BCH error correction" + default n + select BCH + select BCH_CONST_PARAMS + help + Support for hardware BCH error correction. + +choice + prompt "BCH error correction capability" + depends on MTD_NAND_OMAP_BCH + +config MTD_NAND_OMAP_BCH8 + bool "8 bits / 512 bytes (recommended)" + help + Support correcting up to 8 bitflips per 512-byte block. + This will use 13 bytes of spare area per 512 bytes of page data. + This is the recommended mode, as 4-bit mode does not work + on some OMAP3 revisions, due to a hardware bug. + +config MTD_NAND_OMAP_BCH4 + bool "4 bits / 512 bytes" + help + Support correcting up to 4 bitflips per 512-byte block. + This will use 7 bytes of spare area per 512 bytes of page data. + Note that this mode does not work on some OMAP3 revisions, due to a + hardware bug. Please check your OMAP datasheet before selecting this + mode. + +endchoice + +if MTD_NAND_OMAP_BCH +config BCH_CONST_M + default 13 +config BCH_CONST_T + default 4 if MTD_NAND_OMAP_BCH4 + default 8 if MTD_NAND_OMAP_BCH8 +endif + config MTD_NAND_IDS tristate @@ -440,7 +480,7 @@ config MTD_NAND_NANDSIM config MTD_NAND_GPMI_NAND bool "GPMI NAND Flash Controller driver" - depends on MTD_NAND && (SOC_IMX23 || SOC_IMX28) + depends on MTD_NAND && (SOC_IMX23 || SOC_IMX28 || SOC_IMX6Q) help Enables NAND Flash support for IMX23 or IMX28. The GPMI controller is very powerful, with the help of BCH diff --git a/drivers/mtd/nand/alauda.c b/drivers/mtd/nand/alauda.c index 4f20e1d..60a0dfd 100644 --- a/drivers/mtd/nand/alauda.c +++ b/drivers/mtd/nand/alauda.c @@ -414,7 +414,7 @@ static int alauda_bounce_read(struct mtd_info *mtd, loff_t from, size_t len, } err = 0; if (corrected) - err = -EUCLEAN; + err = 1; /* return max_bitflips per ecc step */ if (uncorrected) err = -EBADMSG; out: @@ -446,7 +446,7 @@ static int alauda_read(struct mtd_info *mtd, loff_t from, size_t len, } err = 0; if (corrected) - err = -EUCLEAN; + err = 1; /* return max_bitflips per ecc step */ if (uncorrected) err = -EBADMSG; return err; diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index 2165576..97ac671 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -324,9 +324,10 @@ static int atmel_nand_calculate(struct mtd_info *mtd, * mtd: mtd info structure * chip: nand chip info structure * buf: buffer to store read data + * oob_required: caller expects OOB data read to chip->oob_poi */ -static int atmel_nand_read_page(struct mtd_info *mtd, - struct nand_chip *chip, uint8_t *buf, int page) +static int atmel_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip, + uint8_t *buf, int oob_required, int page) { int eccsize = chip->ecc.size; int eccbytes = chip->ecc.bytes; @@ -335,6 +336,7 @@ static int atmel_nand_read_page(struct mtd_info *mtd, uint8_t *oob = chip->oob_poi; uint8_t *ecc_pos; int stat; + unsigned int max_bitflips = 0; /* * Errata: ALE is incorrectly wired up to the ECC controller @@ -371,10 +373,12 @@ static int atmel_nand_read_page(struct mtd_info *mtd, /* check if there's an error */ stat = chip->ecc.correct(mtd, p, oob, NULL); - if (stat < 0) + if (stat < 0) { mtd->ecc_stats.failed++; - else + } else { mtd->ecc_stats.corrected += stat; + max_bitflips = max_t(unsigned int, max_bitflips, stat); + } /* get back to oob start (end of page) */ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1); @@ -382,7 +386,7 @@ static int atmel_nand_read_page(struct mtd_info *mtd, /* read the oob */ chip->read_buf(mtd, oob, mtd->oobsize); - return 0; + return max_bitflips; } /* diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c index 73abbc3..9f609d2 100644 --- a/drivers/mtd/nand/au1550nd.c +++ b/drivers/mtd/nand/au1550nd.c @@ -508,8 +508,6 @@ static int __devinit au1550nd_probe(struct platform_device *pdev) this->chip_delay = 30; this->ecc.mode = NAND_ECC_SOFT; - this->options = NAND_NO_AUTOINCR; - if (pd->devwidth) this->options |= NAND_BUSWIDTH_16; diff --git a/drivers/mtd/nand/bcm_umi_bch.c b/drivers/mtd/nand/bcm_umi_bch.c index a930666..5914bb3 100644 --- a/drivers/mtd/nand/bcm_umi_bch.c +++ b/drivers/mtd/nand/bcm_umi_bch.c @@ -22,9 +22,9 @@ /* ---- Private Function Prototypes -------------------------------------- */ static int bcm_umi_bch_read_page_hwecc(struct mtd_info *mtd, - struct nand_chip *chip, uint8_t *buf, int page); + struct nand_chip *chip, uint8_t *buf, int oob_required, int page); static void bcm_umi_bch_write_page_hwecc(struct mtd_info *mtd, - struct nand_chip *chip, const uint8_t *buf); + struct nand_chip *chip, const uint8_t *buf, int oob_required); /* ---- Private Variables ------------------------------------------------ */ @@ -103,11 +103,12 @@ static struct nand_ecclayout nand_hw_eccoob_4096 = { * @mtd: mtd info structure * @chip: nand chip info structure * @buf: buffer to store read data +* @oob_required: caller expects OOB data read to chip->oob_poi * ***************************************************************************/ static int bcm_umi_bch_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, uint8_t * buf, - int page) + int oob_required, int page) { int sectorIdx = 0; int eccsize = chip->ecc.size; @@ -116,6 +117,7 @@ static int bcm_umi_bch_read_page_hwecc(struct mtd_info *mtd, uint8_t eccCalc[NAND_ECC_NUM_BYTES]; int sectorOobSize = mtd->oobsize / eccsteps; int stat; + unsigned int max_bitflips = 0; for (sectorIdx = 0; sectorIdx < eccsteps; sectorIdx++, datap += eccsize) { @@ -177,9 +179,10 @@ static int bcm_umi_bch_read_page_hwecc(struct mtd_info *mtd, } #endif mtd->ecc_stats.corrected += stat; + max_bitflips = max_t(unsigned int, max_bitflips, stat); } } - return 0; + return max_bitflips; } /**************************************************************************** @@ -188,10 +191,11 @@ static int bcm_umi_bch_read_page_hwecc(struct mtd_info *mtd, * @mtd: mtd info structure * @chip: nand chip info structure * @buf: data buffer +* @oob_required: must write chip->oob_poi to OOB * ***************************************************************************/ static void bcm_umi_bch_write_page_hwecc(struct mtd_info *mtd, - struct nand_chip *chip, const uint8_t *buf) + struct nand_chip *chip, const uint8_t *buf, int oob_required) { int sectorIdx = 0; int eccsize = chip->ecc.size; diff --git a/drivers/mtd/nand/bcm_umi_nand.c b/drivers/mtd/nand/bcm_umi_nand.c index 6908cdd..c855e7c 100644 --- a/drivers/mtd/nand/bcm_umi_nand.c +++ b/drivers/mtd/nand/bcm_umi_nand.c @@ -341,7 +341,7 @@ static int bcm_umi_nand_verify_buf(struct mtd_info *mtd, const u_char * buf, * for MLC parts which may have permanently stuck bits. */ struct nand_chip *chip = mtd->priv; - int ret = chip->ecc.read_page(mtd, chip, readbackbuf, 0); + int ret = chip->ecc.read_page(mtd, chip, readbackbuf, 0, 0); if (ret < 0) return -EFAULT; else { @@ -476,12 +476,7 @@ static int __devinit bcm_umi_nand_probe(struct platform_device *pdev) this->badblock_pattern = &largepage_bbt; } - /* - * FIXME: ecc strength value of 6 bits per 512 bytes of data is a - * conservative guess, given 13 ecc bytes and using bch alg. - * (Assume Galois field order m=15 to allow a margin of error.) - */ - this->ecc.strength = 6; + this->ecc.strength = 8; #endif diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c index d7b86b9..3f1c185 100644 --- a/drivers/mtd/nand/bf5xx_nand.c +++ b/drivers/mtd/nand/bf5xx_nand.c @@ -558,7 +558,7 @@ static void bf5xx_nand_dma_write_buf(struct mtd_info *mtd, } static int bf5xx_nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, - uint8_t *buf, int page) + uint8_t *buf, int oob_required, int page) { bf5xx_nand_read_buf(mtd, buf, mtd->writesize); bf5xx_nand_read_buf(mtd, chip->oob_poi, mtd->oobsize); @@ -567,7 +567,7 @@ static int bf5xx_nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip } static void bf5xx_nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip, - const uint8_t *buf) + const uint8_t *buf, int oob_required) { bf5xx_nand_write_buf(mtd, buf, mtd->writesize); bf5xx_nand_write_buf(mtd, chip->oob_poi, mtd->oobsize); diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c index 2a96e1a..41371ba 100644 --- a/drivers/mtd/nand/cafe_nand.c +++ b/drivers/mtd/nand/cafe_nand.c @@ -364,25 +364,27 @@ static int cafe_nand_write_oob(struct mtd_info *mtd, /* Don't use -- use nand_read_oob_std for now */ static int cafe_nand_read_oob(struct mtd_info *mtd, struct nand_chip *chip, - int page, int sndcmd) + int page) { chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page); chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); - return 1; + return 0; } /** * cafe_nand_read_page_syndrome - [REPLACEABLE] hardware ecc syndrome based page read * @mtd: mtd info structure * @chip: nand chip info structure * @buf: buffer to store read data + * @oob_required: caller expects OOB data read to chip->oob_poi * * The hw generator calculates the error syndrome automatically. Therefor * we need a special oob layout and handling. */ static int cafe_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip, - uint8_t *buf, int page) + uint8_t *buf, int oob_required, int page) { struct cafe_priv *cafe = mtd->priv; + unsigned int max_bitflips = 0; cafe_dev_dbg(&cafe->pdev->dev, "ECC result %08x SYN1,2 %08x\n", cafe_readl(cafe, NAND_ECC_RESULT), @@ -449,10 +451,11 @@ static int cafe_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip, } else { dev_dbg(&cafe->pdev->dev, "Corrected %d symbol errors\n", n); mtd->ecc_stats.corrected += n; + max_bitflips = max_t(unsigned int, max_bitflips, n); } } - return 0; + return max_bitflips; } static struct nand_ecclayout cafe_oobinfo_2048 = { @@ -518,7 +521,8 @@ static struct nand_bbt_descr cafe_bbt_mirror_descr_512 = { static void cafe_nand_write_page_lowlevel(struct mtd_info *mtd, - struct nand_chip *chip, const uint8_t *buf) + struct nand_chip *chip, + const uint8_t *buf, int oob_required) { struct cafe_priv *cafe = mtd->priv; @@ -530,16 +534,17 @@ static void cafe_nand_write_page_lowlevel(struct mtd_info *mtd, } static int cafe_nand_write_page(struct mtd_info *mtd, struct nand_chip *chip, - const uint8_t *buf, int page, int cached, int raw) + const uint8_t *buf, int oob_required, int page, + int cached, int raw) { int status; chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page); if (unlikely(raw)) - chip->ecc.write_page_raw(mtd, chip, buf); + chip->ecc.write_page_raw(mtd, chip, buf, oob_required); else - chip->ecc.write_page(mtd, chip, buf); + chip->ecc.write_page(mtd, chip, buf, oob_required); /* * Cached progamming disabled for now, Not sure if its worth the @@ -685,7 +690,7 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev, /* Enable the following for a flash based bad block table */ cafe->nand.bbt_options = NAND_BBT_USE_FLASH; - cafe->nand.options = NAND_NO_AUTOINCR | NAND_OWN_BUFFERS; + cafe->nand.options = NAND_OWN_BUFFERS; if (skipbbt) { cafe->nand.options |= NAND_SKIP_BBTSCAN; @@ -888,17 +893,7 @@ static struct pci_driver cafe_nand_pci_driver = { .resume = cafe_nand_resume, }; -static int __init cafe_nand_init(void) -{ - return pci_register_driver(&cafe_nand_pci_driver); -} - -static void __exit cafe_nand_exit(void) -{ - pci_unregister_driver(&cafe_nand_pci_driver); -} -module_init(cafe_nand_init); -module_exit(cafe_nand_exit); +module_pci_driver(cafe_nand_pci_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>"); diff --git a/drivers/mtd/nand/cs553x_nand.c b/drivers/mtd/nand/cs553x_nand.c index 821c34c..adb6c3e 100644 --- a/drivers/mtd/nand/cs553x_nand.c +++ b/drivers/mtd/nand/cs553x_nand.c @@ -240,7 +240,6 @@ static int __init cs553x_init_one(int cs, int mmio, unsigned long adr) /* Enable the following for a flash based bad block table */ this->bbt_options = NAND_BBT_USE_FLASH; - this->options = NAND_NO_AUTOINCR; /* Scan to find existence of the device */ if (nand_scan(new_mtd, 1)) { diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c index a9e57d6..0650aaf 100644 --- a/drivers/mtd/nand/denali.c +++ b/drivers/mtd/nand/denali.c @@ -924,9 +924,10 @@ bool is_erased(uint8_t *buf, int len) #define ECC_LAST_ERR(x) ((x) & ERR_CORRECTION_INFO__LAST_ERR_INFO) static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf, - uint32_t irq_status) + uint32_t irq_status, unsigned int *max_bitflips) { bool check_erased_page = false; + unsigned int bitflips = 0; if (irq_status & INTR_STATUS__ECC_ERR) { /* read the ECC errors. we'll ignore them for now */ @@ -965,6 +966,7 @@ static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf, /* correct the ECC error */ buf[offset] ^= err_correction_value; denali->mtd.ecc_stats.corrected++; + bitflips++; } } else { /* if the error is not correctable, need to @@ -984,6 +986,7 @@ static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf, clear_interrupts(denali); denali_set_intr_modes(denali, true); } + *max_bitflips = bitflips; return check_erased_page; } @@ -1084,7 +1087,7 @@ static void write_page(struct mtd_info *mtd, struct nand_chip *chip, * by write_page above. * */ static void denali_write_page(struct mtd_info *mtd, struct nand_chip *chip, - const uint8_t *buf) + const uint8_t *buf, int oob_required) { /* for regular page writes, we let HW handle all the ECC * data written to the device. */ @@ -1096,7 +1099,7 @@ static void denali_write_page(struct mtd_info *mtd, struct nand_chip *chip, * write_page() function above. */ static void denali_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip, - const uint8_t *buf) + const uint8_t *buf, int oob_required) { /* for raw page writes, we want to disable ECC and simply write whatever data is in the buffer. */ @@ -1110,17 +1113,17 @@ static int denali_write_oob(struct mtd_info *mtd, struct nand_chip *chip, } static int denali_read_oob(struct mtd_info *mtd, struct nand_chip *chip, - int page, int sndcmd) + int page) { read_oob_data(mtd, chip->oob_poi, page); - return 0; /* notify NAND core to send command to - NAND device. */ + return 0; } static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip, - uint8_t *buf, int page) + uint8_t *buf, int oob_required, int page) { + unsigned int max_bitflips; struct denali_nand_info *denali = mtd_to_denali(mtd); dma_addr_t addr = denali->buf.dma_buf; @@ -1153,7 +1156,7 @@ static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip, memcpy(buf, denali->buf.buf, mtd->writesize); - check_erased_page = handle_ecc(denali, buf, irq_status); + check_erased_page = handle_ecc(denali, buf, irq_status, &max_bitflips); denali_enable_dma(denali, false); if (check_erased_page) { @@ -1167,11 +1170,11 @@ static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip, denali->mtd.ecc_stats.failed++; } } - return 0; + return max_bitflips; } static int denali_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, - uint8_t *buf, int page) + uint8_t *buf, int oob_required, int page) { struct denali_nand_info *denali = mtd_to_denali(mtd); @@ -1702,17 +1705,4 @@ static struct pci_driver denali_pci_driver = { .remove = denali_pci_remove, }; -static int __devinit denali_init(void) -{ - printk(KERN_INFO "Spectra MTD driver\n"); - return pci_register_driver(&denali_pci_driver); -} - -/* Free memory */ -static void __devexit denali_exit(void) -{ - pci_unregister_driver(&denali_pci_driver); -} - -module_init(denali_init); -module_exit(denali_exit); +module_pci_driver(denali_pci_driver); diff --git a/drivers/mtd/nand/docg4.c b/drivers/mtd/nand/docg4.c index b082026..a225e49 100644 --- a/drivers/mtd/nand/docg4.c +++ b/drivers/mtd/nand/docg4.c @@ -720,6 +720,7 @@ static int read_page(struct mtd_info *mtd, struct nand_chip *nand, struct docg4_priv *doc = nand->priv; void __iomem *docptr = doc->virtadr; uint16_t status, edc_err, *buf16; + int bits_corrected = 0; dev_dbg(doc->dev, "%s: page %08x\n", __func__, page); @@ -772,7 +773,7 @@ static int read_page(struct mtd_info *mtd, struct nand_chip *nand, /* If bitflips are reported, attempt to correct with ecc */ if (edc_err & DOC_ECCCONF1_BCH_SYNDROM_ERR) { - int bits_corrected = correct_data(mtd, buf, page); + bits_corrected = correct_data(mtd, buf, page); if (bits_corrected == -EBADMSG) mtd->ecc_stats.failed++; else @@ -781,24 +782,24 @@ static int read_page(struct mtd_info *mtd, struct nand_chip *nand, } writew(0, docptr + DOC_DATAEND); - return 0; + return bits_corrected; } static int docg4_read_page_raw(struct mtd_info *mtd, struct nand_chip *nand, - uint8_t *buf, int page) + uint8_t *buf, int oob_required, int page) { return read_page(mtd, nand, buf, page, false); } static int docg4_read_page(struct mtd_info *mtd, struct nand_chip *nand, - uint8_t *buf, int page) + uint8_t *buf, int oob_required, int page) { return read_page(mtd, nand, buf, page, true); } static int docg4_read_oob(struct mtd_info *mtd, struct nand_chip *nand, - int page, int sndcmd) + int page) { struct docg4_priv *doc = nand->priv; void __iomem *docptr = doc->virtadr; @@ -952,13 +953,13 @@ static void write_page(struct mtd_info *mtd, struct nand_chip *nand, } static void docg4_write_page_raw(struct mtd_info *mtd, struct nand_chip *nand, - const uint8_t *buf) + const uint8_t *buf, int oob_required) { return write_page(mtd, nand, buf, false); } static void docg4_write_page(struct mtd_info *mtd, struct nand_chip *nand, - const uint8_t *buf) + const uint8_t *buf, int oob_required) { return write_page(mtd, nand, buf, true); } @@ -1002,7 +1003,7 @@ static int __init read_factory_bbt(struct mtd_info *mtd) return -ENOMEM; read_page_prologue(mtd, g4_addr); - status = docg4_read_page(mtd, nand, buf, DOCG4_FACTORY_BBT_PAGE); + status = docg4_read_page(mtd, nand, buf, 0, DOCG4_FACTORY_BBT_PAGE); if (status) goto exit; @@ -1079,7 +1080,7 @@ static int docg4_block_markbad(struct mtd_info *mtd, loff_t ofs) /* write first page of block */ write_page_prologue(mtd, g4_addr); - docg4_write_page(mtd, nand, buf); + docg4_write_page(mtd, nand, buf, 1); ret = pageprog(mtd); if (!ret) mtd->ecc_stats.badblocks++; @@ -1192,8 +1193,7 @@ static void __init init_mtd_structs(struct mtd_info *mtd) nand->ecc.prepad = 8; nand->ecc.bytes = 8; nand->ecc.strength = DOCG4_T; - nand->options = - NAND_BUSWIDTH_16 | NAND_NO_SUBPAGE_WRITE | NAND_NO_AUTOINCR; + nand->options = NAND_BUSWIDTH_16 | NAND_NO_SUBPAGE_WRITE; nand->IO_ADDR_R = nand->IO_ADDR_W = doc->virtadr + DOC_IOSPACE_DATA; nand->controller = &nand->hwcontrol; spin_lock_init(&nand->controller->lock); diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c index 80b5264..7842938 100644 --- a/drivers/mtd/nand/fsl_elbc_nand.c +++ b/drivers/mtd/nand/fsl_elbc_nand.c @@ -75,6 +75,7 @@ struct fsl_elbc_fcm_ctrl { unsigned int use_mdr; /* Non zero if the MDR is to be set */ unsigned int oob; /* Non zero if operating on OOB data */ unsigned int counter; /* counter for the initializations */ + unsigned int max_bitflips; /* Saved during READ0 cmd */ }; /* These map to the positions used by the FCM hardware ECC generator */ @@ -253,6 +254,8 @@ static int fsl_elbc_run_command(struct mtd_info *mtd) if (chip->ecc.mode != NAND_ECC_HW) return 0; + elbc_fcm_ctrl->max_bitflips = 0; + if (elbc_fcm_ctrl->read_bytes == mtd->writesize + mtd->oobsize) { uint32_t lteccr = in_be32(&lbc->lteccr); /* @@ -262,11 +265,16 @@ static int fsl_elbc_run_command(struct mtd_info *mtd) * bits 28-31 are uncorrectable errors, marked elsewhere. * for small page nand only 1 bit is used. * if the ELBC doesn't have the lteccr register it reads 0 + * FIXME: 4 bits can be corrected on NANDs with 2k pages, so + * count the number of sub-pages with bitflips and update + * ecc_stats.corrected accordingly. */ if (lteccr & 0x000F000F) out_be32(&lbc->lteccr, 0x000F000F); /* clear lteccr */ - if (lteccr & 0x000F0000) + if (lteccr & 0x000F0000) { mtd->ecc_stats.corrected++; + elbc_fcm_ctrl->max_bitflips = 1; + } } return 0; @@ -738,26 +746,28 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd) return 0; } -static int fsl_elbc_read_page(struct mtd_info *mtd, - struct nand_chip *chip, - uint8_t *buf, - int page) +static int fsl_elbc_read_page(struct mtd_info *mtd, struct nand_chip *chip, + uint8_t *buf, int oob_required, int page) { + struct fsl_elbc_mtd *priv = chip->priv; + struct fsl_lbc_ctrl *ctrl = priv->ctrl; + struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = ctrl->nand; + fsl_elbc_read_buf(mtd, buf, mtd->writesize); - fsl_elbc_read_buf(mtd, chip->oob_poi, mtd->oobsize); + if (oob_required) + fsl_elbc_read_buf(mtd, chip->oob_poi, mtd->oobsize); if (fsl_elbc_wait(mtd, chip) & NAND_STATUS_FAIL) mtd->ecc_stats.failed++; - return 0; + return elbc_fcm_ctrl->max_bitflips; } /* ECC will be calculated automatically, and errors will be detected in * waitfunc. */ -static void fsl_elbc_write_page(struct mtd_info *mtd, - struct nand_chip *chip, - const uint8_t *buf) +static void fsl_elbc_write_page(struct mtd_info *mtd, struct nand_chip *chip, + const uint8_t *buf, int oob_required) { fsl_elbc_write_buf(mtd, buf, mtd->writesize); fsl_elbc_write_buf(mtd, chip->oob_poi, mtd->oobsize); @@ -795,7 +805,7 @@ static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv) chip->bbt_md = &bbt_mirror_descr; /* set up nand options */ - chip->options = NAND_NO_READRDY | NAND_NO_AUTOINCR; + chip->options = NAND_NO_READRDY; chip->bbt_options = NAND_BBT_USE_FLASH; chip->controller = &elbc_fcm_ctrl->controller; @@ -814,11 +824,6 @@ static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv) chip->ecc.size = 512; chip->ecc.bytes = 3; chip->ecc.strength = 1; - /* - * FIXME: can hardware ecc correct 4 bitflips if page size is - * 2k? Then does hardware report number of corrections for this - * case? If so, ecc_stats reporting needs to be fixed as well. - */ } else { /* otherwise fall back to default software ECC */ chip->ecc.mode = NAND_ECC_SOFT; diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c index c30ac7b..9602c1b 100644 --- a/drivers/mtd/nand/fsl_ifc_nand.c +++ b/drivers/mtd/nand/fsl_ifc_nand.c @@ -63,6 +63,7 @@ struct fsl_ifc_nand_ctrl { unsigned int oob; /* Non zero if operating on OOB data */ unsigned int eccread; /* Non zero for a full-page ECC read */ unsigned int counter; /* counter for the initializations */ + unsigned int max_bitflips; /* Saved during READ0 cmd */ }; static struct fsl_ifc_nand_ctrl *ifc_nand_ctrl; @@ -262,6 +263,8 @@ static void fsl_ifc_run_command(struct mtd_info *mtd) if (ctrl->nand_stat & IFC_NAND_EVTER_STAT_WPER) dev_err(priv->dev, "NAND Flash Write Protect Error\n"); + nctrl->max_bitflips = 0; + if (nctrl->eccread) { int errors; int bufnum = nctrl->page & priv->bufnum_mask; @@ -290,6 +293,9 @@ static void fsl_ifc_run_command(struct mtd_info *mtd) } mtd->ecc_stats.corrected += errors; + nctrl->max_bitflips = max_t(unsigned int, + nctrl->max_bitflips, + errors); } nctrl->eccread = 0; @@ -375,21 +381,31 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command, return; - /* READID must read all 8 possible bytes */ case NAND_CMD_READID: + case NAND_CMD_PARAM: { + int timing = IFC_FIR_OP_RB; + if (command == NAND_CMD_PARAM) + timing = IFC_FIR_OP_RBCD; + out_be32(&ifc->ifc_nand.nand_fir0, (IFC_FIR_OP_CMD0 << IFC_NAND_FIR0_OP0_SHIFT) | (IFC_FIR_OP_UA << IFC_NAND_FIR0_OP1_SHIFT) | - (IFC_FIR_OP_RB << IFC_NAND_FIR0_OP2_SHIFT)); + (timing << IFC_NAND_FIR0_OP2_SHIFT)); out_be32(&ifc->ifc_nand.nand_fcr0, - NAND_CMD_READID << IFC_NAND_FCR0_CMD0_SHIFT); - /* 8 bytes for manuf, device and exts */ - out_be32(&ifc->ifc_nand.nand_fbcr, 8); - ifc_nand_ctrl->read_bytes = 8; + command << IFC_NAND_FCR0_CMD0_SHIFT); + out_be32(&ifc->ifc_nand.row3, column); + + /* + * although currently it's 8 bytes for READID, we always read + * the maximum 256 bytes(for PARAM) + */ + out_be32(&ifc->ifc_nand.nand_fbcr, 256); + ifc_nand_ctrl->read_bytes = 256; set_addr(mtd, 0, 0, 0); fsl_ifc_run_command(mtd); return; + } /* ERASE1 stores the block and page address */ case NAND_CMD_ERASE1: @@ -682,15 +698,16 @@ static int fsl_ifc_wait(struct mtd_info *mtd, struct nand_chip *chip) return nand_fsr | NAND_STATUS_WP; } -static int fsl_ifc_read_page(struct mtd_info *mtd, - struct nand_chip *chip, - uint8_t *buf, int page) +static int fsl_ifc_read_page(struct mtd_info *mtd, struct nand_chip *chip, + uint8_t *buf, int oob_required, int page) { struct fsl_ifc_mtd *priv = chip->priv; struct fsl_ifc_ctrl *ctrl = priv->ctrl; + struct fsl_ifc_nand_ctrl *nctrl = ifc_nand_ctrl; fsl_ifc_read_buf(mtd, buf, mtd->writesize); - fsl_ifc_read_buf(mtd, chip->oob_poi, mtd->oobsize); + if (oob_required) + fsl_ifc_read_buf(mtd, chip->oob_poi, mtd->oobsize); if (ctrl->nand_stat & IFC_NAND_EVTER_STAT_ECCER) dev_err(priv->dev, "NAND Flash ECC Uncorrectable Error\n"); @@ -698,15 +715,14 @@ static int fsl_ifc_read_page(struct mtd_info *mtd, if (ctrl->nand_stat != IFC_NAND_EVTER_STAT_OPC) mtd->ecc_stats.failed++; - return 0; + return nctrl->max_bitflips; } /* ECC will be calculated automatically, and errors will be detected in * waitfunc. */ -static void fsl_ifc_write_page(struct mtd_info *mtd, - struct nand_chip *chip, - const uint8_t *buf) +static void fsl_ifc_write_page(struct mtd_info *mtd, struct nand_chip *chip, + const uint8_t *buf, int oob_required) { fsl_ifc_write_buf(mtd, buf, mtd->writesize); fsl_ifc_write_buf(mtd, chip->oob_poi, mtd->oobsize); @@ -789,7 +805,7 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv) out_be32(&ifc->ifc_nand.ncfgr, 0x0); /* set up nand options */ - chip->options = NAND_NO_READRDY | NAND_NO_AUTOINCR; + chip->options = NAND_NO_READRDY; chip->bbt_options = NAND_BBT_USE_FLASH; @@ -811,6 +827,7 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv) /* Hardware generates ECC per 512 Bytes */ chip->ecc.size = 512; chip->ecc.bytes = 8; + chip->ecc.strength = 4; switch (csor & CSOR_NAND_PGS_MASK) { case CSOR_NAND_PGS_512: diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c index 1b8330e..38d2624 100644 --- a/drivers/mtd/nand/fsmc_nand.c +++ b/drivers/mtd/nand/fsmc_nand.c @@ -692,6 +692,7 @@ static void fsmc_write_buf_dma(struct mtd_info *mtd, const uint8_t *buf, * @mtd: mtd info structure * @chip: nand chip info structure * @buf: buffer to store read data + * @oob_required: caller expects OOB data read to chip->oob_poi * @page: page number to read * * This routine is needed for fsmc version 8 as reading from NAND chip has to be @@ -701,7 +702,7 @@ static void fsmc_write_buf_dma(struct mtd_info *mtd, const uint8_t *buf, * max of 8 bits) */ static int fsmc_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, - uint8_t *buf, int page) + uint8_t *buf, int oob_required, int page) { struct fsmc_nand_data *host = container_of(mtd, struct fsmc_nand_data, mtd); @@ -720,6 +721,7 @@ static int fsmc_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, */ uint16_t ecc_oob[7]; uint8_t *oob = (uint8_t *)&ecc_oob[0]; + unsigned int max_bitflips = 0; for (i = 0, s = 0; s < eccsteps; s++, i += eccbytes, p += eccsize) { chip->cmdfunc(mtd, NAND_CMD_READ0, s * eccsize, page); @@ -748,13 +750,15 @@ static int fsmc_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, chip->ecc.calculate(mtd, p, &ecc_calc[i]); stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]); - if (stat < 0) + if (stat < 0) { mtd->ecc_stats.failed++; - else + } else { mtd->ecc_stats.corrected += stat; + max_bitflips = max_t(unsigned int, max_bitflips, stat); + } } - return 0; + return max_bitflips; } /* @@ -994,9 +998,9 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) return PTR_ERR(host->clk); } - ret = clk_enable(host->clk); + ret = clk_prepare_enable(host->clk); if (ret) - goto err_clk_enable; + goto err_clk_prepare_enable; /* * This device ID is actually a common AMBA ID as used on the @@ -1176,8 +1180,8 @@ err_req_write_chnl: if (host->mode == USE_DMA_ACCESS) dma_release_channel(host->read_dma_chan); err_req_read_chnl: - clk_disable(host->clk); -err_clk_enable: + clk_disable_unprepare(host->clk); +err_clk_prepare_enable: clk_put(host->clk); return ret; } @@ -1198,7 +1202,7 @@ static int fsmc_nand_remove(struct platform_device *pdev) dma_release_channel(host->write_dma_chan); dma_release_channel(host->read_dma_chan); } - clk_disable(host->clk); + clk_disable_unprepare(host->clk); clk_put(host->clk); } @@ -1210,7 +1214,7 @@ static int fsmc_nand_suspend(struct device *dev) { struct fsmc_nand_data *host = dev_get_drvdata(dev); if (host) - clk_disable(host->clk); + clk_disable_unprepare(host->clk); return 0; } @@ -1218,7 +1222,7 @@ static int fsmc_nand_resume(struct device *dev) { struct fsmc_nand_data *host = dev_get_drvdata(dev); if (host) { - clk_enable(host->clk); + clk_prepare_enable(host->clk); fsmc_nand_setup(host->regs_va, host->bank, host->nand.options & NAND_BUSWIDTH_16, host->dev_timings); diff --git a/drivers/mtd/nand/gpmi-nand/bch-regs.h b/drivers/mtd/nand/gpmi-nand/bch-regs.h index 4effb8c..a092451 100644 --- a/drivers/mtd/nand/gpmi-nand/bch-regs.h +++ b/drivers/mtd/nand/gpmi-nand/bch-regs.h @@ -51,15 +51,26 @@ #define BP_BCH_FLASH0LAYOUT0_ECC0 12 #define BM_BCH_FLASH0LAYOUT0_ECC0 (0xf << BP_BCH_FLASH0LAYOUT0_ECC0) -#define BF_BCH_FLASH0LAYOUT0_ECC0(v) \ - (((v) << BP_BCH_FLASH0LAYOUT0_ECC0) & BM_BCH_FLASH0LAYOUT0_ECC0) +#define MX6Q_BP_BCH_FLASH0LAYOUT0_ECC0 11 +#define MX6Q_BM_BCH_FLASH0LAYOUT0_ECC0 (0x1f << MX6Q_BP_BCH_FLASH0LAYOUT0_ECC0) +#define BF_BCH_FLASH0LAYOUT0_ECC0(v, x) \ + (GPMI_IS_MX6Q(x) \ + ? (((v) << MX6Q_BP_BCH_FLASH0LAYOUT0_ECC0) \ + & MX6Q_BM_BCH_FLASH0LAYOUT0_ECC0) \ + : (((v) << BP_BCH_FLASH0LAYOUT0_ECC0) \ + & BM_BCH_FLASH0LAYOUT0_ECC0) \ + ) #define BP_BCH_FLASH0LAYOUT0_DATA0_SIZE 0 #define BM_BCH_FLASH0LAYOUT0_DATA0_SIZE \ (0xfff << BP_BCH_FLASH0LAYOUT0_DATA0_SIZE) -#define BF_BCH_FLASH0LAYOUT0_DATA0_SIZE(v) \ - (((v) << BP_BCH_FLASH0LAYOUT0_DATA0_SIZE)\ - & BM_BCH_FLASH0LAYOUT0_DATA0_SIZE) +#define MX6Q_BM_BCH_FLASH0LAYOUT0_DATA0_SIZE \ + (0x3ff << BP_BCH_FLASH0LAYOUT0_DATA0_SIZE) +#define BF_BCH_FLASH0LAYOUT0_DATA0_SIZE(v, x) \ + (GPMI_IS_MX6Q(x) \ + ? (((v) >> 2) & MX6Q_BM_BCH_FLASH0LAYOUT0_DATA0_SIZE) \ + : ((v) & BM_BCH_FLASH0LAYOUT0_DATA0_SIZE) \ + ) #define HW_BCH_FLASH0LAYOUT1 0x00000090 @@ -72,13 +83,24 @@ #define BP_BCH_FLASH0LAYOUT1_ECCN 12 #define BM_BCH_FLASH0LAYOUT1_ECCN (0xf << BP_BCH_FLASH0LAYOUT1_ECCN) -#define BF_BCH_FLASH0LAYOUT1_ECCN(v) \ - (((v) << BP_BCH_FLASH0LAYOUT1_ECCN) & BM_BCH_FLASH0LAYOUT1_ECCN) +#define MX6Q_BP_BCH_FLASH0LAYOUT1_ECCN 11 +#define MX6Q_BM_BCH_FLASH0LAYOUT1_ECCN (0x1f << MX6Q_BP_BCH_FLASH0LAYOUT1_ECCN) +#define BF_BCH_FLASH0LAYOUT1_ECCN(v, x) \ + (GPMI_IS_MX6Q(x) \ + ? (((v) << MX6Q_BP_BCH_FLASH0LAYOUT1_ECCN) \ + & MX6Q_BM_BCH_FLASH0LAYOUT1_ECCN) \ + : (((v) << BP_BCH_FLASH0LAYOUT1_ECCN) \ + & BM_BCH_FLASH0LAYOUT1_ECCN) \ + ) #define BP_BCH_FLASH0LAYOUT1_DATAN_SIZE 0 #define BM_BCH_FLASH0LAYOUT1_DATAN_SIZE \ (0xfff << BP_BCH_FLASH0LAYOUT1_DATAN_SIZE) -#define BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(v) \ - (((v) << BP_BCH_FLASH0LAYOUT1_DATAN_SIZE) \ - & BM_BCH_FLASH0LAYOUT1_DATAN_SIZE) +#define MX6Q_BM_BCH_FLASH0LAYOUT1_DATAN_SIZE \ + (0x3ff << BP_BCH_FLASH0LAYOUT1_DATAN_SIZE) +#define BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(v, x) \ + (GPMI_IS_MX6Q(x) \ + ? (((v) >> 2) & MX6Q_BM_BCH_FLASH0LAYOUT1_DATAN_SIZE) \ + : ((v) & BM_BCH_FLASH0LAYOUT1_DATAN_SIZE) \ + ) #endif diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c index e8ea710..a1f4332 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c @@ -21,7 +21,6 @@ #include <linux/mtd/gpmi-nand.h> #include <linux/delay.h> #include <linux/clk.h> -#include <mach/mxs.h> #include "gpmi-nand.h" #include "gpmi-regs.h" @@ -37,6 +36,8 @@ struct timing_threshod timing_default_threshold = { .max_dll_delay_in_ns = 16, }; +#define MXS_SET_ADDR 0x4 +#define MXS_CLR_ADDR 0x8 /* * Clear the bit and poll it cleared. This is usually called with * a reset address and mask being either SFTRST(bit 31) or CLKGATE @@ -47,7 +48,7 @@ static int clear_poll_bit(void __iomem *addr, u32 mask) int timeout = 0x400; /* clear the bit */ - __mxs_clrl(mask, addr); + writel(mask, addr + MXS_CLR_ADDR); /* * SFTRST needs 3 GPMI clocks to settle, the reference manual @@ -92,11 +93,11 @@ static int gpmi_reset_block(void __iomem *reset_addr, bool just_enable) goto error; /* clear CLKGATE */ - __mxs_clrl(MODULE_CLKGATE, reset_addr); + writel(MODULE_CLKGATE, reset_addr + MXS_CLR_ADDR); if (!just_enable) { /* set SFTRST to reset the block */ - __mxs_setl(MODULE_SFTRST, reset_addr); + writel(MODULE_SFTRST, reset_addr + MXS_SET_ADDR); udelay(1); /* poll CLKGATE becoming set */ @@ -223,13 +224,13 @@ int bch_set_geometry(struct gpmi_nand_data *this) /* Configure layout 0. */ writel(BF_BCH_FLASH0LAYOUT0_NBLOCKS(block_count) | BF_BCH_FLASH0LAYOUT0_META_SIZE(metadata_size) - | BF_BCH_FLASH0LAYOUT0_ECC0(ecc_strength) - | BF_BCH_FLASH0LAYOUT0_DATA0_SIZE(block_size), + | BF_BCH_FLASH0LAYOUT0_ECC0(ecc_strength, this) + | BF_BCH_FLASH0LAYOUT0_DATA0_SIZE(block_size, this), r->bch_regs + HW_BCH_FLASH0LAYOUT0); writel(BF_BCH_FLASH0LAYOUT1_PAGE_SIZE(page_size) - | BF_BCH_FLASH0LAYOUT1_ECCN(ecc_strength) - | BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(block_size), + | BF_BCH_FLASH0LAYOUT1_ECCN(ecc_strength, this) + | BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(block_size, this), r->bch_regs + HW_BCH_FLASH0LAYOUT1); /* Set *all* chip selects to use layout 0. */ @@ -255,11 +256,12 @@ static unsigned int ns_to_cycles(unsigned int time, return max(k, min); } +#define DEF_MIN_PROP_DELAY 5 +#define DEF_MAX_PROP_DELAY 9 /* Apply timing to current hardware conditions. */ static int gpmi_nfc_compute_hardware_timing(struct gpmi_nand_data *this, struct gpmi_nfc_hardware_timing *hw) { - struct gpmi_nand_platform_data *pdata = this->pdata; struct timing_threshod *nfc = &timing_default_threshold; struct nand_chip *nand = &this->nand; struct nand_timing target = this->timing; @@ -276,8 +278,8 @@ static int gpmi_nfc_compute_hardware_timing(struct gpmi_nand_data *this, int ideal_sample_delay_in_ns; unsigned int sample_delay_factor; int tEYE; - unsigned int min_prop_delay_in_ns = pdata->min_prop_delay_in_ns; - unsigned int max_prop_delay_in_ns = pdata->max_prop_delay_in_ns; + unsigned int min_prop_delay_in_ns = DEF_MIN_PROP_DELAY; + unsigned int max_prop_delay_in_ns = DEF_MAX_PROP_DELAY; /* * If there are multiple chips, we need to relax the timings to allow @@ -803,7 +805,8 @@ int gpmi_is_ready(struct gpmi_nand_data *this, unsigned chip) if (GPMI_IS_MX23(this)) { mask = MX23_BM_GPMI_DEBUG_READY0 << chip; reg = readl(r->gpmi_regs + HW_GPMI_DEBUG); - } else if (GPMI_IS_MX28(this)) { + } else if (GPMI_IS_MX28(this) || GPMI_IS_MX6Q(this)) { + /* MX28 shares the same R/B register as MX6Q. */ mask = MX28_BF_GPMI_STAT_READY_BUSY(1 << chip); reg = readl(r->gpmi_regs + HW_GPMI_STAT); } else diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c index b68e043..a05b7b4 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c @@ -25,6 +25,8 @@ #include <linux/mtd/gpmi-nand.h> #include <linux/mtd/partitions.h> #include <linux/pinctrl/consumer.h> +#include <linux/of.h> +#include <linux/of_device.h> #include "gpmi-nand.h" /* add our owner bbt descriptor */ @@ -387,7 +389,7 @@ static void release_bch_irq(struct gpmi_nand_data *this) static bool gpmi_dma_filter(struct dma_chan *chan, void *param) { struct gpmi_nand_data *this = param; - struct resource *r = this->private; + int dma_channel = (int)this->private; if (!mxs_dma_is_apbh(chan)) return false; @@ -399,7 +401,7 @@ static bool gpmi_dma_filter(struct dma_chan *chan, void *param) * for mx28 : MX28_DMA_GPMI0 ~ MX28_DMA_GPMI7 * (These eight channels share the same IRQ!) */ - if (r->start <= chan->chan_id && chan->chan_id <= r->end) { + if (dma_channel == chan->chan_id) { chan->private = &this->dma_data; return true; } @@ -419,57 +421,45 @@ static void release_dma_channels(struct gpmi_nand_data *this) static int __devinit acquire_dma_channels(struct gpmi_nand_data *this) { struct platform_device *pdev = this->pdev; - struct gpmi_nand_platform_data *pdata = this->pdata; - struct resources *res = &this->resources; - struct resource *r, *r_dma; - unsigned int i; + struct resource *r_dma; + struct device_node *dn; + int dma_channel; + unsigned int ret; + struct dma_chan *dma_chan; + dma_cap_mask_t mask; + + /* dma channel, we only use the first one. */ + dn = pdev->dev.of_node; + ret = of_property_read_u32(dn, "fsl,gpmi-dma-channel", &dma_channel); + if (ret) { + pr_err("unable to get DMA channel from dt.\n"); + goto acquire_err; + } + this->private = (void *)dma_channel; - r = platform_get_resource_byname(pdev, IORESOURCE_DMA, - GPMI_NAND_DMA_CHANNELS_RES_NAME); + /* gpmi dma interrupt */ r_dma = platform_get_resource_byname(pdev, IORESOURCE_IRQ, GPMI_NAND_DMA_INTERRUPT_RES_NAME); - if (!r || !r_dma) { + if (!r_dma) { pr_err("Can't get resource for DMA\n"); - return -ENXIO; + goto acquire_err; } + this->dma_data.chan_irq = r_dma->start; - /* used in gpmi_dma_filter() */ - this->private = r; - - for (i = r->start; i <= r->end; i++) { - struct dma_chan *dma_chan; - dma_cap_mask_t mask; + /* request dma channel */ + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); - if (i - r->start >= pdata->max_chip_count) - break; - - dma_cap_zero(mask); - dma_cap_set(DMA_SLAVE, mask); - - /* get the DMA interrupt */ - if (r_dma->start == r_dma->end) { - /* only register the first. */ - if (i == r->start) - this->dma_data.chan_irq = r_dma->start; - else - this->dma_data.chan_irq = NO_IRQ; - } else - this->dma_data.chan_irq = r_dma->start + (i - r->start); - - dma_chan = dma_request_channel(mask, gpmi_dma_filter, this); - if (!dma_chan) - goto acquire_err; - - /* fill the first empty item */ - this->dma_chans[i - r->start] = dma_chan; + dma_chan = dma_request_channel(mask, gpmi_dma_filter, this); + if (!dma_chan) { + pr_err("dma_request_channel failed.\n"); + goto acquire_err; } - res->dma_low_channel = r->start; - res->dma_high_channel = i; + this->dma_chans[0] = dma_chan; return 0; acquire_err: - pr_err("Can't acquire DMA channel %u\n", i); release_dma_channels(this); return -EINVAL; } @@ -851,7 +841,7 @@ static void block_mark_swapping(struct gpmi_nand_data *this, } static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip, - uint8_t *buf, int page) + uint8_t *buf, int oob_required, int page) { struct gpmi_nand_data *this = chip->priv; struct bch_geometry *nfc_geo = &this->bch_geometry; @@ -917,28 +907,31 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip, mtd->ecc_stats.corrected += corrected; } - /* - * It's time to deliver the OOB bytes. See gpmi_ecc_read_oob() for - * details about our policy for delivering the OOB. - * - * We fill the caller's buffer with set bits, and then copy the block - * mark to th caller's buffer. Note that, if block mark swapping was - * necessary, it has already been done, so we can rely on the first - * byte of the auxiliary buffer to contain the block mark. - */ - memset(chip->oob_poi, ~0, mtd->oobsize); - chip->oob_poi[0] = ((uint8_t *) auxiliary_virt)[0]; + if (oob_required) { + /* + * It's time to deliver the OOB bytes. See gpmi_ecc_read_oob() + * for details about our policy for delivering the OOB. + * + * We fill the caller's buffer with set bits, and then copy the + * block mark to th caller's buffer. Note that, if block mark + * swapping was necessary, it has already been done, so we can + * rely on the first byte of the auxiliary buffer to contain + * the block mark. + */ + memset(chip->oob_poi, ~0, mtd->oobsize); + chip->oob_poi[0] = ((uint8_t *) auxiliary_virt)[0]; - read_page_swap_end(this, buf, mtd->writesize, - this->payload_virt, this->payload_phys, - nfc_geo->payload_size, - payload_virt, payload_phys); + read_page_swap_end(this, buf, mtd->writesize, + this->payload_virt, this->payload_phys, + nfc_geo->payload_size, + payload_virt, payload_phys); + } exit_nfc: return ret; } -static void gpmi_ecc_write_page(struct mtd_info *mtd, - struct nand_chip *chip, const uint8_t *buf) +static void gpmi_ecc_write_page(struct mtd_info *mtd, struct nand_chip *chip, + const uint8_t *buf, int oob_required) { struct gpmi_nand_data *this = chip->priv; struct bch_geometry *nfc_geo = &this->bch_geometry; @@ -1077,7 +1070,7 @@ exit_auxiliary: * this driver. */ static int gpmi_ecc_read_oob(struct mtd_info *mtd, struct nand_chip *chip, - int page, int sndcmd) + int page) { struct gpmi_nand_data *this = chip->priv; @@ -1100,11 +1093,7 @@ static int gpmi_ecc_read_oob(struct mtd_info *mtd, struct nand_chip *chip, chip->oob_poi[0] = chip->read_byte(mtd); } - /* - * Return true, indicating that the next call to this function must send - * a command. - */ - return true; + return 0; } static int @@ -1318,7 +1307,7 @@ static int mx23_write_transcription_stamp(struct gpmi_nand_data *this) /* Write the first page of the current stride. */ dev_dbg(dev, "Writing an NCB fingerprint in page 0x%x\n", page); chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page); - chip->ecc.write_page_raw(mtd, chip, buffer); + chip->ecc.write_page_raw(mtd, chip, buffer, 0); chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); /* Wait for the write to finish. */ @@ -1444,6 +1433,10 @@ static int gpmi_pre_bbt_scan(struct gpmi_nand_data *this) if (ret) return ret; + /* Adjust the ECC strength according to the chip. */ + this->nand.ecc.strength = this->bch_geometry.ecc_strength; + this->mtd.ecc_strength = this->bch_geometry.ecc_strength; + /* NAND boot init, depends on the gpmi_set_geometry(). */ return nand_boot_init(this); } @@ -1471,9 +1464,9 @@ void gpmi_nfc_exit(struct gpmi_nand_data *this) static int __devinit gpmi_nfc_init(struct gpmi_nand_data *this) { - struct gpmi_nand_platform_data *pdata = this->pdata; struct mtd_info *mtd = &this->mtd; struct nand_chip *chip = &this->nand; + struct mtd_part_parser_data ppdata = {}; int ret; /* init current chip */ @@ -1502,6 +1495,7 @@ static int __devinit gpmi_nfc_init(struct gpmi_nand_data *this) chip->options |= NAND_NO_SUBPAGE_WRITE; chip->ecc.mode = NAND_ECC_HW; chip->ecc.size = 1; + chip->ecc.strength = 8; chip->ecc.layout = &gpmi_hw_ecclayout; /* Allocate a temporary DMA buffer for reading ID in the nand_scan() */ @@ -1511,14 +1505,14 @@ static int __devinit gpmi_nfc_init(struct gpmi_nand_data *this) if (ret) goto err_out; - ret = nand_scan(mtd, pdata->max_chip_count); + ret = nand_scan(mtd, 1); if (ret) { pr_err("Chip scan failed\n"); goto err_out; } - ret = mtd_device_parse_register(mtd, NULL, NULL, - pdata->partitions, pdata->partition_count); + ppdata.of_node = this->pdev->dev.of_node; + ret = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0); if (ret) goto err_out; return 0; @@ -1528,12 +1522,41 @@ err_out: return ret; } +static const struct platform_device_id gpmi_ids[] = { + { .name = "imx23-gpmi-nand", .driver_data = IS_MX23, }, + { .name = "imx28-gpmi-nand", .driver_data = IS_MX28, }, + { .name = "imx6q-gpmi-nand", .driver_data = IS_MX6Q, }, + {}, +}; + +static const struct of_device_id gpmi_nand_id_table[] = { + { + .compatible = "fsl,imx23-gpmi-nand", + .data = (void *)&gpmi_ids[IS_MX23] + }, { + .compatible = "fsl,imx28-gpmi-nand", + .data = (void *)&gpmi_ids[IS_MX28] + }, { + .compatible = "fsl,imx6q-gpmi-nand", + .data = (void *)&gpmi_ids[IS_MX6Q] + }, {} +}; +MODULE_DEVICE_TABLE(of, gpmi_nand_id_table); + static int __devinit gpmi_nand_probe(struct platform_device *pdev) { - struct gpmi_nand_platform_data *pdata = pdev->dev.platform_data; struct gpmi_nand_data *this; + const struct of_device_id *of_id; int ret; + of_id = of_match_device(gpmi_nand_id_table, &pdev->dev); + if (of_id) { + pdev->id_entry = of_id->data; + } else { + pr_err("Failed to find the right device id.\n"); + return -ENOMEM; + } + this = kzalloc(sizeof(*this), GFP_KERNEL); if (!this) { pr_err("Failed to allocate per-device memory\n"); @@ -1543,13 +1566,6 @@ static int __devinit gpmi_nand_probe(struct platform_device *pdev) platform_set_drvdata(pdev, this); this->pdev = pdev; this->dev = &pdev->dev; - this->pdata = pdata; - - if (pdata->platform_init) { - ret = pdata->platform_init(); - if (ret) - goto platform_init_error; - } ret = acquire_resources(this); if (ret) @@ -1567,7 +1583,6 @@ static int __devinit gpmi_nand_probe(struct platform_device *pdev) exit_nfc_init: release_resources(this); -platform_init_error: exit_acquire_resources: platform_set_drvdata(pdev, NULL); kfree(this); @@ -1585,19 +1600,10 @@ static int __exit gpmi_nand_remove(struct platform_device *pdev) return 0; } -static const struct platform_device_id gpmi_ids[] = { - { - .name = "imx23-gpmi-nand", - .driver_data = IS_MX23, - }, { - .name = "imx28-gpmi-nand", - .driver_data = IS_MX28, - }, {}, -}; - static struct platform_driver gpmi_nand_driver = { .driver = { .name = "gpmi-nand", + .of_match_table = gpmi_nand_id_table, }, .probe = gpmi_nand_probe, .remove = __exit_p(gpmi_nand_remove), diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h index ec6180d..ce5daa1 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h @@ -266,8 +266,10 @@ extern int gpmi_read_page(struct gpmi_nand_data *, #define STATUS_UNCORRECTABLE 0xfe /* Use the platform_id to distinguish different Archs. */ -#define IS_MX23 0x1 -#define IS_MX28 0x2 +#define IS_MX23 0x0 +#define IS_MX28 0x1 +#define IS_MX6Q 0x2 #define GPMI_IS_MX23(x) ((x)->pdev->id_entry->driver_data == IS_MX23) #define GPMI_IS_MX28(x) ((x)->pdev->id_entry->driver_data == IS_MX28) +#define GPMI_IS_MX6Q(x) ((x)->pdev->id_entry->driver_data == IS_MX6Q) #endif diff --git a/drivers/mtd/nand/h1910.c b/drivers/mtd/nand/h1910.c index 9bf5ce5..50166e9 100644 --- a/drivers/mtd/nand/h1910.c +++ b/drivers/mtd/nand/h1910.c @@ -124,7 +124,6 @@ static int __init h1910_init(void) /* 15 us command delay time */ this->chip_delay = 50; this->ecc.mode = NAND_ECC_SOFT; - this->options = NAND_NO_AUTOINCR; /* Scan to find existence of the device */ if (nand_scan(h1910_nand_mtd, 1)) { diff --git a/drivers/mtd/nand/jz4740_nand.c b/drivers/mtd/nand/jz4740_nand.c index e4147e8..a6fa884 100644 --- a/drivers/mtd/nand/jz4740_nand.c +++ b/drivers/mtd/nand/jz4740_nand.c @@ -332,11 +332,7 @@ static int __devinit jz_nand_probe(struct platform_device *pdev) chip->ecc.mode = NAND_ECC_HW_OOB_FIRST; chip->ecc.size = 512; chip->ecc.bytes = 9; - chip->ecc.strength = 2; - /* - * FIXME: ecc_strength value of 2 bits per 512 bytes of data is a - * conservative guess, given 9 ecc bytes and reed-solomon alg. - */ + chip->ecc.strength = 4; if (pdata) chip->ecc.layout = pdata->ecc_layout; diff --git a/drivers/mtd/nand/mpc5121_nfc.c b/drivers/mtd/nand/mpc5121_nfc.c index c240cf1..c259c24 100644 --- a/drivers/mtd/nand/mpc5121_nfc.c +++ b/drivers/mtd/nand/mpc5121_nfc.c @@ -734,7 +734,6 @@ static int __devinit mpc5121_nfc_probe(struct platform_device *op) chip->write_buf = mpc5121_nfc_write_buf; chip->verify_buf = mpc5121_nfc_verify_buf; chip->select_chip = mpc5121_nfc_select_chip; - chip->options = NAND_NO_AUTOINCR; chip->bbt_options = NAND_BBT_USE_FLASH; chip->ecc.mode = NAND_ECC_SOFT; diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index 9e374e9..c58e6a9 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -32,6 +32,8 @@ #include <linux/io.h> #include <linux/irq.h> #include <linux/completion.h> +#include <linux/of_device.h> +#include <linux/of_mtd.h> #include <asm/mach/flash.h> #include <mach/mxc_nand.h> @@ -140,13 +142,47 @@ #define NFC_V3_DELAY_LINE (host->regs_ip + 0x34) +struct mxc_nand_host; + +struct mxc_nand_devtype_data { + void (*preset)(struct mtd_info *); + void (*send_cmd)(struct mxc_nand_host *, uint16_t, int); + void (*send_addr)(struct mxc_nand_host *, uint16_t, int); + void (*send_page)(struct mtd_info *, unsigned int); + void (*send_read_id)(struct mxc_nand_host *); + uint16_t (*get_dev_status)(struct mxc_nand_host *); + int (*check_int)(struct mxc_nand_host *); + void (*irq_control)(struct mxc_nand_host *, int); + u32 (*get_ecc_status)(struct mxc_nand_host *); + struct nand_ecclayout *ecclayout_512, *ecclayout_2k, *ecclayout_4k; + void (*select_chip)(struct mtd_info *mtd, int chip); + int (*correct_data)(struct mtd_info *mtd, u_char *dat, + u_char *read_ecc, u_char *calc_ecc); + + /* + * On i.MX21 the CONFIG2:INT bit cannot be read if interrupts are masked + * (CONFIG1:INT_MSK is set). To handle this the driver uses + * enable_irq/disable_irq_nosync instead of CONFIG1:INT_MSK + */ + int irqpending_quirk; + int needs_ip; + + size_t regs_offset; + size_t spare0_offset; + size_t axi_offset; + + int spare_len; + int eccbytes; + int eccsize; +}; + struct mxc_nand_host { struct mtd_info mtd; struct nand_chip nand; struct device *dev; - void *spare0; - void *main_area0; + void __iomem *spare0; + void __iomem *main_area0; void __iomem *base; void __iomem *regs; @@ -163,16 +199,9 @@ struct mxc_nand_host { uint8_t *data_buf; unsigned int buf_start; - int spare_len; - - void (*preset)(struct mtd_info *); - void (*send_cmd)(struct mxc_nand_host *, uint16_t, int); - void (*send_addr)(struct mxc_nand_host *, uint16_t, int); - void (*send_page)(struct mtd_info *, unsigned int); - void (*send_read_id)(struct mxc_nand_host *); - uint16_t (*get_dev_status)(struct mxc_nand_host *); - int (*check_int)(struct mxc_nand_host *); - void (*irq_control)(struct mxc_nand_host *, int); + + const struct mxc_nand_devtype_data *devtype_data; + struct mxc_nand_platform_data pdata; }; /* OOB placement block for use with hardware ecc generation */ @@ -242,21 +271,7 @@ static struct nand_ecclayout nandv2_hw_eccoob_4k = { } }; -static const char *part_probes[] = { "RedBoot", "cmdlinepart", NULL }; - -static irqreturn_t mxc_nfc_irq(int irq, void *dev_id) -{ - struct mxc_nand_host *host = dev_id; - - if (!host->check_int(host)) - return IRQ_NONE; - - host->irq_control(host, 0); - - complete(&host->op_completion); - - return IRQ_HANDLED; -} +static const char *part_probes[] = { "RedBoot", "cmdlinepart", "ofpart", NULL }; static int check_int_v3(struct mxc_nand_host *host) { @@ -280,26 +295,12 @@ static int check_int_v1_v2(struct mxc_nand_host *host) if (!(tmp & NFC_V1_V2_CONFIG2_INT)) return 0; - if (!cpu_is_mx21()) + if (!host->devtype_data->irqpending_quirk) writew(tmp & ~NFC_V1_V2_CONFIG2_INT, NFC_V1_V2_CONFIG2); return 1; } -/* - * It has been observed that the i.MX21 cannot read the CONFIG2:INT bit - * if interrupts are masked (CONFIG1:INT_MSK is set). To handle this, the - * driver can enable/disable the irq line rather than simply masking the - * interrupts. - */ -static void irq_control_mx21(struct mxc_nand_host *host, int activate) -{ - if (activate) - enable_irq(host->irq); - else - disable_irq_nosync(host->irq); -} - static void irq_control_v1_v2(struct mxc_nand_host *host, int activate) { uint16_t tmp; @@ -328,6 +329,47 @@ static void irq_control_v3(struct mxc_nand_host *host, int activate) writel(tmp, NFC_V3_CONFIG2); } +static void irq_control(struct mxc_nand_host *host, int activate) +{ + if (host->devtype_data->irqpending_quirk) { + if (activate) + enable_irq(host->irq); + else + disable_irq_nosync(host->irq); + } else { + host->devtype_data->irq_control(host, activate); + } +} + +static u32 get_ecc_status_v1(struct mxc_nand_host *host) +{ + return readw(NFC_V1_V2_ECC_STATUS_RESULT); +} + +static u32 get_ecc_status_v2(struct mxc_nand_host *host) +{ + return readl(NFC_V1_V2_ECC_STATUS_RESULT); +} + +static u32 get_ecc_status_v3(struct mxc_nand_host *host) +{ + return readl(NFC_V3_ECC_STATUS_RESULT); +} + +static irqreturn_t mxc_nfc_irq(int irq, void *dev_id) +{ + struct mxc_nand_host *host = dev_id; + + if (!host->devtype_data->check_int(host)) + return IRQ_NONE; + + irq_control(host, 0); + + complete(&host->op_completion); + + return IRQ_HANDLED; +} + /* This function polls the NANDFC to wait for the basic operation to * complete by checking the INT bit of config2 register. */ @@ -336,14 +378,14 @@ static void wait_op_done(struct mxc_nand_host *host, int useirq) int max_retries = 8000; if (useirq) { - if (!host->check_int(host)) { + if (!host->devtype_data->check_int(host)) { INIT_COMPLETION(host->op_completion); - host->irq_control(host, 1); + irq_control(host, 1); wait_for_completion(&host->op_completion); } } else { while (max_retries-- > 0) { - if (host->check_int(host)) + if (host->devtype_data->check_int(host)) break; udelay(1); @@ -374,7 +416,7 @@ static void send_cmd_v1_v2(struct mxc_nand_host *host, uint16_t cmd, int useirq) writew(cmd, NFC_V1_V2_FLASH_CMD); writew(NFC_CMD, NFC_V1_V2_CONFIG2); - if (cpu_is_mx21() && (cmd == NAND_CMD_RESET)) { + if (host->devtype_data->irqpending_quirk && (cmd == NAND_CMD_RESET)) { int max_retries = 100; /* Reset completion is indicated by NFC_CONFIG2 */ /* being set to 0 */ @@ -433,13 +475,27 @@ static void send_page_v3(struct mtd_info *mtd, unsigned int ops) wait_op_done(host, false); } -static void send_page_v1_v2(struct mtd_info *mtd, unsigned int ops) +static void send_page_v2(struct mtd_info *mtd, unsigned int ops) +{ + struct nand_chip *nand_chip = mtd->priv; + struct mxc_nand_host *host = nand_chip->priv; + + /* NANDFC buffer 0 is used for page read/write */ + writew(host->active_cs << 4, NFC_V1_V2_BUF_ADDR); + + writew(ops, NFC_V1_V2_CONFIG2); + + /* Wait for operation to complete */ + wait_op_done(host, true); +} + +static void send_page_v1(struct mtd_info *mtd, unsigned int ops) { struct nand_chip *nand_chip = mtd->priv; struct mxc_nand_host *host = nand_chip->priv; int bufs, i; - if (nfc_is_v1() && mtd->writesize > 512) + if (mtd->writesize > 512) bufs = 4; else bufs = 1; @@ -463,7 +519,7 @@ static void send_read_id_v3(struct mxc_nand_host *host) wait_op_done(host, true); - memcpy(host->data_buf, host->main_area0, 16); + memcpy_fromio(host->data_buf, host->main_area0, 16); } /* Request the NANDFC to perform a read of the NAND device ID. */ @@ -479,7 +535,7 @@ static void send_read_id_v1_v2(struct mxc_nand_host *host) /* Wait for operation to complete */ wait_op_done(host, true); - memcpy(host->data_buf, host->main_area0, 16); + memcpy_fromio(host->data_buf, host->main_area0, 16); if (this->options & NAND_BUSWIDTH_16) { /* compress the ID info */ @@ -555,7 +611,7 @@ static int mxc_nand_correct_data_v1(struct mtd_info *mtd, u_char *dat, * additional correction. 2-Bit errors cannot be corrected by * HW ECC, so we need to return failure */ - uint16_t ecc_status = readw(NFC_V1_V2_ECC_STATUS_RESULT); + uint16_t ecc_status = get_ecc_status_v1(host); if (((ecc_status & 0x3) == 2) || ((ecc_status >> 2) == 2)) { pr_debug("MXC_NAND: HWECC uncorrectable 2-bit ECC error\n"); @@ -580,10 +636,7 @@ static int mxc_nand_correct_data_v2_v3(struct mtd_info *mtd, u_char *dat, no_subpages = mtd->writesize >> 9; - if (nfc_is_v21()) - ecc_stat = readl(NFC_V1_V2_ECC_STATUS_RESULT); - else - ecc_stat = readl(NFC_V3_ECC_STATUS_RESULT); + ecc_stat = host->devtype_data->get_ecc_status(host); do { err = ecc_stat & ecc_bit_mask; @@ -616,7 +669,7 @@ static u_char mxc_nand_read_byte(struct mtd_info *mtd) /* Check for status request */ if (host->status_request) - return host->get_dev_status(host) & 0xFF; + return host->devtype_data->get_dev_status(host) & 0xFF; ret = *(uint8_t *)(host->data_buf + host->buf_start); host->buf_start++; @@ -682,7 +735,7 @@ static int mxc_nand_verify_buf(struct mtd_info *mtd, /* This function is used by upper layer for select and * deselect of the NAND chip */ -static void mxc_nand_select_chip(struct mtd_info *mtd, int chip) +static void mxc_nand_select_chip_v1_v3(struct mtd_info *mtd, int chip) { struct nand_chip *nand_chip = mtd->priv; struct mxc_nand_host *host = nand_chip->priv; @@ -701,11 +754,30 @@ static void mxc_nand_select_chip(struct mtd_info *mtd, int chip) clk_prepare_enable(host->clk); host->clk_act = 1; } +} - if (nfc_is_v21()) { - host->active_cs = chip; - writew(host->active_cs << 4, NFC_V1_V2_BUF_ADDR); +static void mxc_nand_select_chip_v2(struct mtd_info *mtd, int chip) +{ + struct nand_chip *nand_chip = mtd->priv; + struct mxc_nand_host *host = nand_chip->priv; + + if (chip == -1) { + /* Disable the NFC clock */ + if (host->clk_act) { + clk_disable(host->clk); + host->clk_act = 0; + } + return; + } + + if (!host->clk_act) { + /* Enable the NFC clock */ + clk_enable(host->clk); + host->clk_act = 1; } + + host->active_cs = chip; + writew(host->active_cs << 4, NFC_V1_V2_BUF_ADDR); } /* @@ -718,23 +790,23 @@ static void copy_spare(struct mtd_info *mtd, bool bfrom) u16 i, j; u16 n = mtd->writesize >> 9; u8 *d = host->data_buf + mtd->writesize; - u8 *s = host->spare0; - u16 t = host->spare_len; + u8 __iomem *s = host->spare0; + u16 t = host->devtype_data->spare_len; j = (mtd->oobsize / n >> 1) << 1; if (bfrom) { for (i = 0; i < n - 1; i++) - memcpy(d + i * j, s + i * t, j); + memcpy_fromio(d + i * j, s + i * t, j); /* the last section */ - memcpy(d + i * j, s + i * t, mtd->oobsize - i * j); + memcpy_fromio(d + i * j, s + i * t, mtd->oobsize - i * j); } else { for (i = 0; i < n - 1; i++) - memcpy(&s[i * t], &d[i * j], j); + memcpy_toio(&s[i * t], &d[i * j], j); /* the last section */ - memcpy(&s[i * t], &d[i * j], mtd->oobsize - i * j); + memcpy_toio(&s[i * t], &d[i * j], mtd->oobsize - i * j); } } @@ -751,34 +823,44 @@ static void mxc_do_addr_cycle(struct mtd_info *mtd, int column, int page_addr) * perform a read/write buf operation, the saved column * address is used to index into the full page. */ - host->send_addr(host, 0, page_addr == -1); + host->devtype_data->send_addr(host, 0, page_addr == -1); if (mtd->writesize > 512) /* another col addr cycle for 2k page */ - host->send_addr(host, 0, false); + host->devtype_data->send_addr(host, 0, false); } /* Write out page address, if necessary */ if (page_addr != -1) { /* paddr_0 - p_addr_7 */ - host->send_addr(host, (page_addr & 0xff), false); + host->devtype_data->send_addr(host, (page_addr & 0xff), false); if (mtd->writesize > 512) { if (mtd->size >= 0x10000000) { /* paddr_8 - paddr_15 */ - host->send_addr(host, (page_addr >> 8) & 0xff, false); - host->send_addr(host, (page_addr >> 16) & 0xff, true); + host->devtype_data->send_addr(host, + (page_addr >> 8) & 0xff, + false); + host->devtype_data->send_addr(host, + (page_addr >> 16) & 0xff, + true); } else /* paddr_8 - paddr_15 */ - host->send_addr(host, (page_addr >> 8) & 0xff, true); + host->devtype_data->send_addr(host, + (page_addr >> 8) & 0xff, true); } else { /* One more address cycle for higher density devices */ if (mtd->size >= 0x4000000) { /* paddr_8 - paddr_15 */ - host->send_addr(host, (page_addr >> 8) & 0xff, false); - host->send_addr(host, (page_addr >> 16) & 0xff, true); + host->devtype_data->send_addr(host, + (page_addr >> 8) & 0xff, + false); + host->devtype_data->send_addr(host, + (page_addr >> 16) & 0xff, + true); } else /* paddr_8 - paddr_15 */ - host->send_addr(host, (page_addr >> 8) & 0xff, true); + host->devtype_data->send_addr(host, + (page_addr >> 8) & 0xff, true); } } } @@ -800,7 +882,35 @@ static int get_eccsize(struct mtd_info *mtd) return 8; } -static void preset_v1_v2(struct mtd_info *mtd) +static void preset_v1(struct mtd_info *mtd) +{ + struct nand_chip *nand_chip = mtd->priv; + struct mxc_nand_host *host = nand_chip->priv; + uint16_t config1 = 0; + + if (nand_chip->ecc.mode == NAND_ECC_HW) + config1 |= NFC_V1_V2_CONFIG1_ECC_EN; + + if (!host->devtype_data->irqpending_quirk) + config1 |= NFC_V1_V2_CONFIG1_INT_MSK; + + host->eccsize = 1; + + writew(config1, NFC_V1_V2_CONFIG1); + /* preset operation */ + + /* Unlock the internal RAM Buffer */ + writew(0x2, NFC_V1_V2_CONFIG); + + /* Blocks to be unlocked */ + writew(0x0, NFC_V1_UNLOCKSTART_BLKADDR); + writew(0xffff, NFC_V1_UNLOCKEND_BLKADDR); + + /* Unlock Block Command for given address range */ + writew(0x4, NFC_V1_V2_WRPROT); +} + +static void preset_v2(struct mtd_info *mtd) { struct nand_chip *nand_chip = mtd->priv; struct mxc_nand_host *host = nand_chip->priv; @@ -809,13 +919,12 @@ static void preset_v1_v2(struct mtd_info *mtd) if (nand_chip->ecc.mode == NAND_ECC_HW) config1 |= NFC_V1_V2_CONFIG1_ECC_EN; - if (nfc_is_v21()) - config1 |= NFC_V2_CONFIG1_FP_INT; + config1 |= NFC_V2_CONFIG1_FP_INT; - if (!cpu_is_mx21()) + if (!host->devtype_data->irqpending_quirk) config1 |= NFC_V1_V2_CONFIG1_INT_MSK; - if (nfc_is_v21() && mtd->writesize) { + if (mtd->writesize) { uint16_t pages_per_block = mtd->erasesize / mtd->writesize; host->eccsize = get_eccsize(mtd); @@ -834,20 +943,14 @@ static void preset_v1_v2(struct mtd_info *mtd) writew(0x2, NFC_V1_V2_CONFIG); /* Blocks to be unlocked */ - if (nfc_is_v21()) { - writew(0x0, NFC_V21_UNLOCKSTART_BLKADDR0); - writew(0x0, NFC_V21_UNLOCKSTART_BLKADDR1); - writew(0x0, NFC_V21_UNLOCKSTART_BLKADDR2); - writew(0x0, NFC_V21_UNLOCKSTART_BLKADDR3); - writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR0); - writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR1); - writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR2); - writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR3); - } else if (nfc_is_v1()) { - writew(0x0, NFC_V1_UNLOCKSTART_BLKADDR); - writew(0xffff, NFC_V1_UNLOCKEND_BLKADDR); - } else - BUG(); + writew(0x0, NFC_V21_UNLOCKSTART_BLKADDR0); + writew(0x0, NFC_V21_UNLOCKSTART_BLKADDR1); + writew(0x0, NFC_V21_UNLOCKSTART_BLKADDR2); + writew(0x0, NFC_V21_UNLOCKSTART_BLKADDR3); + writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR0); + writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR1); + writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR2); + writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR3); /* Unlock Block Command for given address range */ writew(0x4, NFC_V1_V2_WRPROT); @@ -937,15 +1040,15 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command, /* Command pre-processing step */ switch (command) { case NAND_CMD_RESET: - host->preset(mtd); - host->send_cmd(host, command, false); + host->devtype_data->preset(mtd); + host->devtype_data->send_cmd(host, command, false); break; case NAND_CMD_STATUS: host->buf_start = 0; host->status_request = true; - host->send_cmd(host, command, true); + host->devtype_data->send_cmd(host, command, true); mxc_do_addr_cycle(mtd, column, page_addr); break; @@ -958,15 +1061,16 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command, command = NAND_CMD_READ0; /* only READ0 is valid */ - host->send_cmd(host, command, false); + host->devtype_data->send_cmd(host, command, false); mxc_do_addr_cycle(mtd, column, page_addr); if (mtd->writesize > 512) - host->send_cmd(host, NAND_CMD_READSTART, true); + host->devtype_data->send_cmd(host, + NAND_CMD_READSTART, true); - host->send_page(mtd, NFC_OUTPUT); + host->devtype_data->send_page(mtd, NFC_OUTPUT); - memcpy(host->data_buf, host->main_area0, mtd->writesize); + memcpy_fromio(host->data_buf, host->main_area0, mtd->writesize); copy_spare(mtd, true); break; @@ -977,28 +1081,28 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command, host->buf_start = column; - host->send_cmd(host, command, false); + host->devtype_data->send_cmd(host, command, false); mxc_do_addr_cycle(mtd, column, page_addr); break; case NAND_CMD_PAGEPROG: - memcpy(host->main_area0, host->data_buf, mtd->writesize); + memcpy_toio(host->main_area0, host->data_buf, mtd->writesize); copy_spare(mtd, false); - host->send_page(mtd, NFC_INPUT); - host->send_cmd(host, command, true); + host->devtype_data->send_page(mtd, NFC_INPUT); + host->devtype_data->send_cmd(host, command, true); mxc_do_addr_cycle(mtd, column, page_addr); break; case NAND_CMD_READID: - host->send_cmd(host, command, true); + host->devtype_data->send_cmd(host, command, true); mxc_do_addr_cycle(mtd, column, page_addr); - host->send_read_id(host); + host->devtype_data->send_read_id(host); host->buf_start = column; break; case NAND_CMD_ERASE1: case NAND_CMD_ERASE2: - host->send_cmd(host, command, false); + host->devtype_data->send_cmd(host, command, false); mxc_do_addr_cycle(mtd, column, page_addr); break; @@ -1032,15 +1136,191 @@ static struct nand_bbt_descr bbt_mirror_descr = { .pattern = mirror_pattern, }; +/* v1 + irqpending_quirk: i.MX21 */ +static const struct mxc_nand_devtype_data imx21_nand_devtype_data = { + .preset = preset_v1, + .send_cmd = send_cmd_v1_v2, + .send_addr = send_addr_v1_v2, + .send_page = send_page_v1, + .send_read_id = send_read_id_v1_v2, + .get_dev_status = get_dev_status_v1_v2, + .check_int = check_int_v1_v2, + .irq_control = irq_control_v1_v2, + .get_ecc_status = get_ecc_status_v1, + .ecclayout_512 = &nandv1_hw_eccoob_smallpage, + .ecclayout_2k = &nandv1_hw_eccoob_largepage, + .ecclayout_4k = &nandv1_hw_eccoob_smallpage, /* XXX: needs fix */ + .select_chip = mxc_nand_select_chip_v1_v3, + .correct_data = mxc_nand_correct_data_v1, + .irqpending_quirk = 1, + .needs_ip = 0, + .regs_offset = 0xe00, + .spare0_offset = 0x800, + .spare_len = 16, + .eccbytes = 3, + .eccsize = 1, +}; + +/* v1 + !irqpending_quirk: i.MX27, i.MX31 */ +static const struct mxc_nand_devtype_data imx27_nand_devtype_data = { + .preset = preset_v1, + .send_cmd = send_cmd_v1_v2, + .send_addr = send_addr_v1_v2, + .send_page = send_page_v1, + .send_read_id = send_read_id_v1_v2, + .get_dev_status = get_dev_status_v1_v2, + .check_int = check_int_v1_v2, + .irq_control = irq_control_v1_v2, + .get_ecc_status = get_ecc_status_v1, + .ecclayout_512 = &nandv1_hw_eccoob_smallpage, + .ecclayout_2k = &nandv1_hw_eccoob_largepage, + .ecclayout_4k = &nandv1_hw_eccoob_smallpage, /* XXX: needs fix */ + .select_chip = mxc_nand_select_chip_v1_v3, + .correct_data = mxc_nand_correct_data_v1, + .irqpending_quirk = 0, + .needs_ip = 0, + .regs_offset = 0xe00, + .spare0_offset = 0x800, + .axi_offset = 0, + .spare_len = 16, + .eccbytes = 3, + .eccsize = 1, +}; + +/* v21: i.MX25, i.MX35 */ +static const struct mxc_nand_devtype_data imx25_nand_devtype_data = { + .preset = preset_v2, + .send_cmd = send_cmd_v1_v2, + .send_addr = send_addr_v1_v2, + .send_page = send_page_v2, + .send_read_id = send_read_id_v1_v2, + .get_dev_status = get_dev_status_v1_v2, + .check_int = check_int_v1_v2, + .irq_control = irq_control_v1_v2, + .get_ecc_status = get_ecc_status_v2, + .ecclayout_512 = &nandv2_hw_eccoob_smallpage, + .ecclayout_2k = &nandv2_hw_eccoob_largepage, + .ecclayout_4k = &nandv2_hw_eccoob_4k, + .select_chip = mxc_nand_select_chip_v2, + .correct_data = mxc_nand_correct_data_v2_v3, + .irqpending_quirk = 0, + .needs_ip = 0, + .regs_offset = 0x1e00, + .spare0_offset = 0x1000, + .axi_offset = 0, + .spare_len = 64, + .eccbytes = 9, + .eccsize = 0, +}; + +/* v3: i.MX51, i.MX53 */ +static const struct mxc_nand_devtype_data imx51_nand_devtype_data = { + .preset = preset_v3, + .send_cmd = send_cmd_v3, + .send_addr = send_addr_v3, + .send_page = send_page_v3, + .send_read_id = send_read_id_v3, + .get_dev_status = get_dev_status_v3, + .check_int = check_int_v3, + .irq_control = irq_control_v3, + .get_ecc_status = get_ecc_status_v3, + .ecclayout_512 = &nandv2_hw_eccoob_smallpage, + .ecclayout_2k = &nandv2_hw_eccoob_largepage, + .ecclayout_4k = &nandv2_hw_eccoob_smallpage, /* XXX: needs fix */ + .select_chip = mxc_nand_select_chip_v1_v3, + .correct_data = mxc_nand_correct_data_v2_v3, + .irqpending_quirk = 0, + .needs_ip = 1, + .regs_offset = 0, + .spare0_offset = 0x1000, + .axi_offset = 0x1e00, + .spare_len = 64, + .eccbytes = 0, + .eccsize = 0, +}; + +#ifdef CONFIG_OF_MTD +static const struct of_device_id mxcnd_dt_ids[] = { + { + .compatible = "fsl,imx21-nand", + .data = &imx21_nand_devtype_data, + }, { + .compatible = "fsl,imx27-nand", + .data = &imx27_nand_devtype_data, + }, { + .compatible = "fsl,imx25-nand", + .data = &imx25_nand_devtype_data, + }, { + .compatible = "fsl,imx51-nand", + .data = &imx51_nand_devtype_data, + }, + { /* sentinel */ } +}; + +static int __init mxcnd_probe_dt(struct mxc_nand_host *host) +{ + struct device_node *np = host->dev->of_node; + struct mxc_nand_platform_data *pdata = &host->pdata; + const struct of_device_id *of_id = + of_match_device(mxcnd_dt_ids, host->dev); + int buswidth; + + if (!np) + return 1; + + if (of_get_nand_ecc_mode(np) >= 0) + pdata->hw_ecc = 1; + + pdata->flash_bbt = of_get_nand_on_flash_bbt(np); + + buswidth = of_get_nand_bus_width(np); + if (buswidth < 0) + return buswidth; + + pdata->width = buswidth / 8; + + host->devtype_data = of_id->data; + + return 0; +} +#else +static int __init mxcnd_probe_dt(struct mxc_nand_host *host) +{ + return 1; +} +#endif + +static int __init mxcnd_probe_pdata(struct mxc_nand_host *host) +{ + struct mxc_nand_platform_data *pdata = host->dev->platform_data; + + if (!pdata) + return -ENODEV; + + host->pdata = *pdata; + + if (nfc_is_v1()) { + if (cpu_is_mx21()) + host->devtype_data = &imx21_nand_devtype_data; + else + host->devtype_data = &imx27_nand_devtype_data; + } else if (nfc_is_v21()) { + host->devtype_data = &imx25_nand_devtype_data; + } else if (nfc_is_v3_2()) { + host->devtype_data = &imx51_nand_devtype_data; + } else + BUG(); + + return 0; +} + static int __init mxcnd_probe(struct platform_device *pdev) { struct nand_chip *this; struct mtd_info *mtd; - struct mxc_nand_platform_data *pdata = pdev->dev.platform_data; struct mxc_nand_host *host; struct resource *res; int err = 0; - struct nand_ecclayout *oob_smallpage, *oob_largepage; /* Allocate memory for MTD device structure and private data */ host = kzalloc(sizeof(struct mxc_nand_host) + NAND_MAX_PAGESIZE + @@ -1065,7 +1345,6 @@ static int __init mxcnd_probe(struct platform_device *pdev) this->priv = host; this->dev_ready = mxc_nand_dev_ready; this->cmdfunc = mxc_nand_command; - this->select_chip = mxc_nand_select_chip; this->read_byte = mxc_nand_read_byte; this->read_word = mxc_nand_read_word; this->write_buf = mxc_nand_write_buf; @@ -1095,36 +1374,26 @@ static int __init mxcnd_probe(struct platform_device *pdev) host->main_area0 = host->base; - if (nfc_is_v1() || nfc_is_v21()) { - host->preset = preset_v1_v2; - host->send_cmd = send_cmd_v1_v2; - host->send_addr = send_addr_v1_v2; - host->send_page = send_page_v1_v2; - host->send_read_id = send_read_id_v1_v2; - host->get_dev_status = get_dev_status_v1_v2; - host->check_int = check_int_v1_v2; - if (cpu_is_mx21()) - host->irq_control = irq_control_mx21; - else - host->irq_control = irq_control_v1_v2; - } + err = mxcnd_probe_dt(host); + if (err > 0) + err = mxcnd_probe_pdata(host); + if (err < 0) + goto eirq; - if (nfc_is_v21()) { - host->regs = host->base + 0x1e00; - host->spare0 = host->base + 0x1000; - host->spare_len = 64; - oob_smallpage = &nandv2_hw_eccoob_smallpage; - oob_largepage = &nandv2_hw_eccoob_largepage; - this->ecc.bytes = 9; - } else if (nfc_is_v1()) { - host->regs = host->base + 0xe00; - host->spare0 = host->base + 0x800; - host->spare_len = 16; - oob_smallpage = &nandv1_hw_eccoob_smallpage; - oob_largepage = &nandv1_hw_eccoob_largepage; - this->ecc.bytes = 3; - host->eccsize = 1; - } else if (nfc_is_v3_2()) { + if (host->devtype_data->regs_offset) + host->regs = host->base + host->devtype_data->regs_offset; + host->spare0 = host->base + host->devtype_data->spare0_offset; + if (host->devtype_data->axi_offset) + host->regs_axi = host->base + host->devtype_data->axi_offset; + + this->ecc.bytes = host->devtype_data->eccbytes; + host->eccsize = host->devtype_data->eccsize; + + this->select_chip = host->devtype_data->select_chip; + this->ecc.size = 512; + this->ecc.layout = host->devtype_data->ecclayout_512; + + if (host->devtype_data->needs_ip) { res = platform_get_resource(pdev, IORESOURCE_MEM, 1); if (!res) { err = -ENODEV; @@ -1135,42 +1404,22 @@ static int __init mxcnd_probe(struct platform_device *pdev) err = -ENOMEM; goto eirq; } - host->regs_axi = host->base + 0x1e00; - host->spare0 = host->base + 0x1000; - host->spare_len = 64; - host->preset = preset_v3; - host->send_cmd = send_cmd_v3; - host->send_addr = send_addr_v3; - host->send_page = send_page_v3; - host->send_read_id = send_read_id_v3; - host->check_int = check_int_v3; - host->get_dev_status = get_dev_status_v3; - host->irq_control = irq_control_v3; - oob_smallpage = &nandv2_hw_eccoob_smallpage; - oob_largepage = &nandv2_hw_eccoob_largepage; - } else - BUG(); - - this->ecc.size = 512; - this->ecc.layout = oob_smallpage; + } - if (pdata->hw_ecc) { + if (host->pdata.hw_ecc) { this->ecc.calculate = mxc_nand_calculate_ecc; this->ecc.hwctl = mxc_nand_enable_hwecc; - if (nfc_is_v1()) - this->ecc.correct = mxc_nand_correct_data_v1; - else - this->ecc.correct = mxc_nand_correct_data_v2_v3; + this->ecc.correct = host->devtype_data->correct_data; this->ecc.mode = NAND_ECC_HW; } else { this->ecc.mode = NAND_ECC_SOFT; } - /* NAND bus width determines access funtions used by upper layer */ - if (pdata->width == 2) + /* NAND bus width determines access functions used by upper layer */ + if (host->pdata.width == 2) this->options |= NAND_BUSWIDTH_16; - if (pdata->flash_bbt) { + if (host->pdata.flash_bbt) { this->bbt_td = &bbt_main_descr; this->bbt_md = &bbt_mirror_descr; /* update flash based bbt */ @@ -1182,28 +1431,25 @@ static int __init mxcnd_probe(struct platform_device *pdev) host->irq = platform_get_irq(pdev, 0); /* - * mask the interrupt. For i.MX21 explicitely call - * irq_control_v1_v2 to use the mask bit. We can't call - * disable_irq_nosync() for an interrupt we do not own yet. + * Use host->devtype_data->irq_control() here instead of irq_control() + * because we must not disable_irq_nosync without having requested the + * irq. */ - if (cpu_is_mx21()) - irq_control_v1_v2(host, 0); - else - host->irq_control(host, 0); + host->devtype_data->irq_control(host, 0); err = request_irq(host->irq, mxc_nfc_irq, IRQF_DISABLED, DRIVER_NAME, host); if (err) goto eirq; - host->irq_control(host, 0); - /* - * Now that the interrupt is disabled make sure the interrupt - * mask bit is cleared on i.MX21. Otherwise we can't read - * the interrupt status bit on this machine. + * Now that we "own" the interrupt make sure the interrupt mask bit is + * cleared on i.MX21. Otherwise we can't read the interrupt status bit + * on this machine. */ - if (cpu_is_mx21()) - irq_control_v1_v2(host, 1); + if (host->devtype_data->irqpending_quirk) { + disable_irq_nosync(host->irq); + host->devtype_data->irq_control(host, 1); + } /* first scan to find the device and get the page size */ if (nand_scan_ident(mtd, nfc_is_v21() ? 4 : 1, NULL)) { @@ -1212,18 +1458,12 @@ static int __init mxcnd_probe(struct platform_device *pdev) } /* Call preset again, with correct writesize this time */ - host->preset(mtd); + host->devtype_data->preset(mtd); if (mtd->writesize == 2048) - this->ecc.layout = oob_largepage; - if (nfc_is_v21() && mtd->writesize == 4096) - this->ecc.layout = &nandv2_hw_eccoob_4k; - - /* second phase scan */ - if (nand_scan_tail(mtd)) { - err = -ENXIO; - goto escan; - } + this->ecc.layout = host->devtype_data->ecclayout_2k; + else if (mtd->writesize == 4096) + this->ecc.layout = host->devtype_data->ecclayout_4k; if (this->ecc.mode == NAND_ECC_HW) { if (nfc_is_v1()) @@ -1232,9 +1472,19 @@ static int __init mxcnd_probe(struct platform_device *pdev) this->ecc.strength = (host->eccsize == 4) ? 4 : 8; } + /* second phase scan */ + if (nand_scan_tail(mtd)) { + err = -ENXIO; + goto escan; + } + /* Register the partitions */ - mtd_device_parse_register(mtd, part_probes, NULL, pdata->parts, - pdata->nr_parts); + mtd_device_parse_register(mtd, part_probes, + &(struct mtd_part_parser_data){ + .of_node = pdev->dev.of_node, + }, + host->pdata.parts, + host->pdata.nr_parts); platform_set_drvdata(pdev, host); @@ -1275,6 +1525,8 @@ static int __devexit mxcnd_remove(struct platform_device *pdev) static struct platform_driver mxcnd_driver = { .driver = { .name = DRIVER_NAME, + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(mxcnd_dt_ids), }, .remove = __devexit_p(mxcnd_remove), }; diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 47b19c0..d47586c 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -1066,15 +1066,17 @@ EXPORT_SYMBOL(nand_lock); * @mtd: mtd info structure * @chip: nand chip info structure * @buf: buffer to store read data + * @oob_required: caller requires OOB data read to chip->oob_poi * @page: page number to read * * Not for syndrome calculating ECC controllers, which use a special oob layout. */ static int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, - uint8_t *buf, int page) + uint8_t *buf, int oob_required, int page) { chip->read_buf(mtd, buf, mtd->writesize); - chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); + if (oob_required) + chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); return 0; } @@ -1083,13 +1085,14 @@ static int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, * @mtd: mtd info structure * @chip: nand chip info structure * @buf: buffer to store read data + * @oob_required: caller requires OOB data read to chip->oob_poi * @page: page number to read * * We need a special oob layout and handling even when OOB isn't used. */ static int nand_read_page_raw_syndrome(struct mtd_info *mtd, - struct nand_chip *chip, - uint8_t *buf, int page) + struct nand_chip *chip, uint8_t *buf, + int oob_required, int page) { int eccsize = chip->ecc.size; int eccbytes = chip->ecc.bytes; @@ -1126,10 +1129,11 @@ static int nand_read_page_raw_syndrome(struct mtd_info *mtd, * @mtd: mtd info structure * @chip: nand chip info structure * @buf: buffer to store read data + * @oob_required: caller requires OOB data read to chip->oob_poi * @page: page number to read */ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip, - uint8_t *buf, int page) + uint8_t *buf, int oob_required, int page) { int i, eccsize = chip->ecc.size; int eccbytes = chip->ecc.bytes; @@ -1138,8 +1142,9 @@ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip, uint8_t *ecc_calc = chip->buffers->ecccalc; uint8_t *ecc_code = chip->buffers->ecccode; uint32_t *eccpos = chip->ecc.layout->eccpos; + unsigned int max_bitflips = 0; - chip->ecc.read_page_raw(mtd, chip, buf, page); + chip->ecc.read_page_raw(mtd, chip, buf, 1, page); for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) chip->ecc.calculate(mtd, p, &ecc_calc[i]); @@ -1154,12 +1159,14 @@ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip, int stat; stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]); - if (stat < 0) + if (stat < 0) { mtd->ecc_stats.failed++; - else + } else { mtd->ecc_stats.corrected += stat; + max_bitflips = max_t(unsigned int, max_bitflips, stat); + } } - return 0; + return max_bitflips; } /** @@ -1180,6 +1187,7 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, int datafrag_len, eccfrag_len, aligned_len, aligned_pos; int busw = (chip->options & NAND_BUSWIDTH_16) ? 2 : 1; int index = 0; + unsigned int max_bitflips = 0; /* Column address within the page aligned to ECC size (256bytes) */ start_step = data_offs / chip->ecc.size; @@ -1244,12 +1252,14 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, stat = chip->ecc.correct(mtd, p, &chip->buffers->ecccode[i], &chip->buffers->ecccalc[i]); - if (stat < 0) + if (stat < 0) { mtd->ecc_stats.failed++; - else + } else { mtd->ecc_stats.corrected += stat; + max_bitflips = max_t(unsigned int, max_bitflips, stat); + } } - return 0; + return max_bitflips; } /** @@ -1257,12 +1267,13 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, * @mtd: mtd info structure * @chip: nand chip info structure * @buf: buffer to store read data + * @oob_required: caller requires OOB data read to chip->oob_poi * @page: page number to read * * Not for syndrome calculating ECC controllers which need a special oob layout. */ static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, - uint8_t *buf, int page) + uint8_t *buf, int oob_required, int page) { int i, eccsize = chip->ecc.size; int eccbytes = chip->ecc.bytes; @@ -1271,6 +1282,7 @@ static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, uint8_t *ecc_calc = chip->buffers->ecccalc; uint8_t *ecc_code = chip->buffers->ecccode; uint32_t *eccpos = chip->ecc.layout->eccpos; + unsigned int max_bitflips = 0; for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { chip->ecc.hwctl(mtd, NAND_ECC_READ); @@ -1289,12 +1301,14 @@ static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, int stat; stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]); - if (stat < 0) + if (stat < 0) { mtd->ecc_stats.failed++; - else + } else { mtd->ecc_stats.corrected += stat; + max_bitflips = max_t(unsigned int, max_bitflips, stat); + } } - return 0; + return max_bitflips; } /** @@ -1302,6 +1316,7 @@ static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, * @mtd: mtd info structure * @chip: nand chip info structure * @buf: buffer to store read data + * @oob_required: caller requires OOB data read to chip->oob_poi * @page: page number to read * * Hardware ECC for large page chips, require OOB to be read first. For this @@ -1311,7 +1326,7 @@ static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, * the data area, by overwriting the NAND manufacturer bad block markings. */ static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd, - struct nand_chip *chip, uint8_t *buf, int page) + struct nand_chip *chip, uint8_t *buf, int oob_required, int page) { int i, eccsize = chip->ecc.size; int eccbytes = chip->ecc.bytes; @@ -1320,6 +1335,7 @@ static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd, uint8_t *ecc_code = chip->buffers->ecccode; uint32_t *eccpos = chip->ecc.layout->eccpos; uint8_t *ecc_calc = chip->buffers->ecccalc; + unsigned int max_bitflips = 0; /* Read the OOB area first */ chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page); @@ -1337,12 +1353,14 @@ static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd, chip->ecc.calculate(mtd, p, &ecc_calc[i]); stat = chip->ecc.correct(mtd, p, &ecc_code[i], NULL); - if (stat < 0) + if (stat < 0) { mtd->ecc_stats.failed++; - else + } else { mtd->ecc_stats.corrected += stat; + max_bitflips = max_t(unsigned int, max_bitflips, stat); + } } - return 0; + return max_bitflips; } /** @@ -1350,19 +1368,21 @@ static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd, * @mtd: mtd info structure * @chip: nand chip info structure * @buf: buffer to store read data + * @oob_required: caller requires OOB data read to chip->oob_poi * @page: page number to read * * The hw generator calculates the error syndrome automatically. Therefore we * need a special oob layout and handling. */ static int nand_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip, - uint8_t *buf, int page) + uint8_t *buf, int oob_required, int page) { int i, eccsize = chip->ecc.size; int eccbytes = chip->ecc.bytes; int eccsteps = chip->ecc.steps; uint8_t *p = buf; uint8_t *oob = chip->oob_poi; + unsigned int max_bitflips = 0; for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { int stat; @@ -1379,10 +1399,12 @@ static int nand_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip, chip->read_buf(mtd, oob, eccbytes); stat = chip->ecc.correct(mtd, p, oob, NULL); - if (stat < 0) + if (stat < 0) { mtd->ecc_stats.failed++; - else + } else { mtd->ecc_stats.corrected += stat; + max_bitflips = max_t(unsigned int, max_bitflips, stat); + } oob += eccbytes; @@ -1397,7 +1419,7 @@ static int nand_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip, if (i) chip->read_buf(mtd, oob, i); - return 0; + return max_bitflips; } /** @@ -1459,11 +1481,9 @@ static uint8_t *nand_transfer_oob(struct nand_chip *chip, uint8_t *oob, static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops) { - int chipnr, page, realpage, col, bytes, aligned; + int chipnr, page, realpage, col, bytes, aligned, oob_required; struct nand_chip *chip = mtd->priv; struct mtd_ecc_stats stats; - int blkcheck = (1 << (chip->phys_erase_shift - chip->page_shift)) - 1; - int sndcmd = 1; int ret = 0; uint32_t readlen = ops->len; uint32_t oobreadlen = ops->ooblen; @@ -1471,6 +1491,7 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, mtd->oobavail : mtd->oobsize; uint8_t *bufpoi, *oob, *buf; + unsigned int max_bitflips = 0; stats = mtd->ecc_stats; @@ -1484,6 +1505,7 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, buf = ops->datbuf; oob = ops->oobbuf; + oob_required = oob ? 1 : 0; while (1) { bytes = min(mtd->writesize - col, readlen); @@ -1493,21 +1515,22 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, if (realpage != chip->pagebuf || oob) { bufpoi = aligned ? buf : chip->buffers->databuf; - if (likely(sndcmd)) { - chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page); - sndcmd = 0; - } + chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page); - /* Now read the page into the buffer */ + /* + * Now read the page into the buffer. Absent an error, + * the read methods return max bitflips per ecc step. + */ if (unlikely(ops->mode == MTD_OPS_RAW)) - ret = chip->ecc.read_page_raw(mtd, chip, - bufpoi, page); + ret = chip->ecc.read_page_raw(mtd, chip, bufpoi, + oob_required, + page); else if (!aligned && NAND_SUBPAGE_READ(chip) && !oob) ret = chip->ecc.read_subpage(mtd, chip, col, bytes, bufpoi); else ret = chip->ecc.read_page(mtd, chip, bufpoi, - page); + oob_required, page); if (ret < 0) { if (!aligned) /* Invalidate page cache */ @@ -1515,22 +1538,25 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, break; } + max_bitflips = max_t(unsigned int, max_bitflips, ret); + /* Transfer not aligned data */ if (!aligned) { if (!NAND_SUBPAGE_READ(chip) && !oob && !(mtd->ecc_stats.failed - stats.failed) && - (ops->mode != MTD_OPS_RAW)) + (ops->mode != MTD_OPS_RAW)) { chip->pagebuf = realpage; - else + chip->pagebuf_bitflips = ret; + } else { /* Invalidate page cache */ chip->pagebuf = -1; + } memcpy(buf, chip->buffers->databuf + col, bytes); } buf += bytes; if (unlikely(oob)) { - int toread = min(oobreadlen, max_oobsize); if (toread) { @@ -1541,13 +1567,7 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, } if (!(chip->options & NAND_NO_READRDY)) { - /* - * Apply delay or wait for ready/busy pin. Do - * this before the AUTOINCR check, so no - * problems arise if a chip which does auto - * increment is marked as NOAUTOINCR by the - * board driver. - */ + /* Apply delay or wait for ready/busy pin */ if (!chip->dev_ready) udelay(chip->chip_delay); else @@ -1556,6 +1576,8 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, } else { memcpy(buf, chip->buffers->databuf + col, bytes); buf += bytes; + max_bitflips = max_t(unsigned int, max_bitflips, + chip->pagebuf_bitflips); } readlen -= bytes; @@ -1575,26 +1597,19 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, chip->select_chip(mtd, -1); chip->select_chip(mtd, chipnr); } - - /* - * Check, if the chip supports auto page increment or if we - * have hit a block boundary. - */ - if (!NAND_CANAUTOINCR(chip) || !(page & blkcheck)) - sndcmd = 1; } ops->retlen = ops->len - (size_t) readlen; if (oob) ops->oobretlen = ops->ooblen - oobreadlen; - if (ret) + if (ret < 0) return ret; if (mtd->ecc_stats.failed - stats.failed) return -EBADMSG; - return mtd->ecc_stats.corrected - stats.corrected ? -EUCLEAN : 0; + return max_bitflips; } /** @@ -1630,17 +1645,13 @@ static int nand_read(struct mtd_info *mtd, loff_t from, size_t len, * @mtd: mtd info structure * @chip: nand chip info structure * @page: page number to read - * @sndcmd: flag whether to issue read command or not */ static int nand_read_oob_std(struct mtd_info *mtd, struct nand_chip *chip, - int page, int sndcmd) + int page) { - if (sndcmd) { - chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page); - sndcmd = 0; - } + chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page); chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); - return sndcmd; + return 0; } /** @@ -1649,10 +1660,9 @@ static int nand_read_oob_std(struct mtd_info *mtd, struct nand_chip *chip, * @mtd: mtd info structure * @chip: nand chip info structure * @page: page number to read - * @sndcmd: flag whether to issue read command or not */ static int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip, - int page, int sndcmd) + int page) { uint8_t *buf = chip->oob_poi; int length = mtd->oobsize; @@ -1679,7 +1689,7 @@ static int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip, if (length > 0) chip->read_buf(mtd, bufpoi, length); - return 1; + return 0; } /** @@ -1775,13 +1785,13 @@ static int nand_write_oob_syndrome(struct mtd_info *mtd, static int nand_do_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops) { - int page, realpage, chipnr, sndcmd = 1; + int page, realpage, chipnr; struct nand_chip *chip = mtd->priv; struct mtd_ecc_stats stats; - int blkcheck = (1 << (chip->phys_erase_shift - chip->page_shift)) - 1; int readlen = ops->ooblen; int len; uint8_t *buf = ops->oobbuf; + int ret = 0; pr_debug("%s: from = 0x%08Lx, len = %i\n", __func__, (unsigned long long)from, readlen); @@ -1817,20 +1827,18 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from, while (1) { if (ops->mode == MTD_OPS_RAW) - sndcmd = chip->ecc.read_oob_raw(mtd, chip, page, sndcmd); + ret = chip->ecc.read_oob_raw(mtd, chip, page); else - sndcmd = chip->ecc.read_oob(mtd, chip, page, sndcmd); + ret = chip->ecc.read_oob(mtd, chip, page); + + if (ret < 0) + break; len = min(len, readlen); buf = nand_transfer_oob(chip, buf, ops, len); if (!(chip->options & NAND_NO_READRDY)) { - /* - * Apply delay or wait for ready/busy pin. Do this - * before the AUTOINCR check, so no problems arise if a - * chip which does auto increment is marked as - * NOAUTOINCR by the board driver. - */ + /* Apply delay or wait for ready/busy pin */ if (!chip->dev_ready) udelay(chip->chip_delay); else @@ -1851,16 +1859,12 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from, chip->select_chip(mtd, -1); chip->select_chip(mtd, chipnr); } - - /* - * Check, if the chip supports auto page increment or if we - * have hit a block boundary. - */ - if (!NAND_CANAUTOINCR(chip) || !(page & blkcheck)) - sndcmd = 1; } - ops->oobretlen = ops->ooblen; + ops->oobretlen = ops->ooblen - readlen; + + if (ret < 0) + return ret; if (mtd->ecc_stats.failed - stats.failed) return -EBADMSG; @@ -1919,14 +1923,16 @@ out: * @mtd: mtd info structure * @chip: nand chip info structure * @buf: data buffer + * @oob_required: must write chip->oob_poi to OOB * * Not for syndrome calculating ECC controllers, which use a special oob layout. */ static void nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip, - const uint8_t *buf) + const uint8_t *buf, int oob_required) { chip->write_buf(mtd, buf, mtd->writesize); - chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); + if (oob_required) + chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); } /** @@ -1934,12 +1940,13 @@ static void nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip, * @mtd: mtd info structure * @chip: nand chip info structure * @buf: data buffer + * @oob_required: must write chip->oob_poi to OOB * * We need a special oob layout and handling even when ECC isn't checked. */ static void nand_write_page_raw_syndrome(struct mtd_info *mtd, struct nand_chip *chip, - const uint8_t *buf) + const uint8_t *buf, int oob_required) { int eccsize = chip->ecc.size; int eccbytes = chip->ecc.bytes; @@ -1973,9 +1980,10 @@ static void nand_write_page_raw_syndrome(struct mtd_info *mtd, * @mtd: mtd info structure * @chip: nand chip info structure * @buf: data buffer + * @oob_required: must write chip->oob_poi to OOB */ static void nand_write_page_swecc(struct mtd_info *mtd, struct nand_chip *chip, - const uint8_t *buf) + const uint8_t *buf, int oob_required) { int i, eccsize = chip->ecc.size; int eccbytes = chip->ecc.bytes; @@ -1991,7 +1999,7 @@ static void nand_write_page_swecc(struct mtd_info *mtd, struct nand_chip *chip, for (i = 0; i < chip->ecc.total; i++) chip->oob_poi[eccpos[i]] = ecc_calc[i]; - chip->ecc.write_page_raw(mtd, chip, buf); + chip->ecc.write_page_raw(mtd, chip, buf, 1); } /** @@ -1999,9 +2007,10 @@ static void nand_write_page_swecc(struct mtd_info *mtd, struct nand_chip *chip, * @mtd: mtd info structure * @chip: nand chip info structure * @buf: data buffer + * @oob_required: must write chip->oob_poi to OOB */ static void nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, - const uint8_t *buf) + const uint8_t *buf, int oob_required) { int i, eccsize = chip->ecc.size; int eccbytes = chip->ecc.bytes; @@ -2027,12 +2036,14 @@ static void nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, * @mtd: mtd info structure * @chip: nand chip info structure * @buf: data buffer + * @oob_required: must write chip->oob_poi to OOB * * The hw generator calculates the error syndrome automatically. Therefore we * need a special oob layout and handling. */ static void nand_write_page_syndrome(struct mtd_info *mtd, - struct nand_chip *chip, const uint8_t *buf) + struct nand_chip *chip, + const uint8_t *buf, int oob_required) { int i, eccsize = chip->ecc.size; int eccbytes = chip->ecc.bytes; @@ -2071,21 +2082,23 @@ static void nand_write_page_syndrome(struct mtd_info *mtd, * @mtd: MTD device structure * @chip: NAND chip descriptor * @buf: the data to write + * @oob_required: must write chip->oob_poi to OOB * @page: page number to write * @cached: cached programming * @raw: use _raw version of write_page */ static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip, - const uint8_t *buf, int page, int cached, int raw) + const uint8_t *buf, int oob_required, int page, + int cached, int raw) { int status; chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page); if (unlikely(raw)) - chip->ecc.write_page_raw(mtd, chip, buf); + chip->ecc.write_page_raw(mtd, chip, buf, oob_required); else - chip->ecc.write_page(mtd, chip, buf); + chip->ecc.write_page(mtd, chip, buf, oob_required); /* * Cached progamming disabled for now. Not sure if it's worth the @@ -2118,6 +2131,9 @@ static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip, if (chip->verify_buf(mtd, buf, mtd->writesize)) return -EIO; + + /* Make sure the next page prog is preceded by a status read */ + chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1); #endif return 0; } @@ -2202,6 +2218,7 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to, uint8_t *oob = ops->oobbuf; uint8_t *buf = ops->datbuf; int ret, subpage; + int oob_required = oob ? 1 : 0; ops->retlen = 0; if (!writelen) @@ -2264,8 +2281,8 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to, memset(chip->oob_poi, 0xff, mtd->oobsize); } - ret = chip->write_page(mtd, chip, wbuf, page, cached, - (ops->mode == MTD_OPS_RAW)); + ret = chip->write_page(mtd, chip, wbuf, oob_required, page, + cached, (ops->mode == MTD_OPS_RAW)); if (ret) break; @@ -2898,8 +2915,7 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip, *busw = NAND_BUSWIDTH_16; chip->options &= ~NAND_CHIPOPTIONS_MSK; - chip->options |= (NAND_NO_READRDY | - NAND_NO_AUTOINCR) & NAND_CHIPOPTIONS_MSK; + chip->options |= NAND_NO_READRDY & NAND_CHIPOPTIONS_MSK; pr_info("ONFI flash detected\n"); return 1; @@ -3076,11 +3092,6 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd, chip->options &= ~NAND_SAMSUNG_LP_OPTIONS; ident_done: - /* - * Set chip as a default. Board drivers can override it, if necessary. - */ - chip->options |= NAND_NO_AUTOINCR; - /* Try to identify manufacturer */ for (maf_idx = 0; nand_manuf_ids[maf_idx].id != 0x0; maf_idx++) { if (nand_manuf_ids[maf_idx].id == *maf_id) @@ -3154,10 +3165,11 @@ ident_done: if (mtd->writesize > 512 && chip->cmdfunc == nand_command) chip->cmdfunc = nand_command_lp; - pr_info("NAND device: Manufacturer ID:" - " 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id, *dev_id, - nand_manuf_ids[maf_idx].name, - chip->onfi_version ? chip->onfi_params.model : type->name); + pr_info("NAND device: Manufacturer ID: 0x%02x, Chip ID: 0x%02x (%s %s)," + " page size: %d, OOB size: %d\n", + *maf_id, *dev_id, nand_manuf_ids[maf_idx].name, + chip->onfi_version ? chip->onfi_params.model : type->name, + mtd->writesize, mtd->oobsize); return type; } @@ -3329,8 +3341,13 @@ int nand_scan_tail(struct mtd_info *mtd) if (!chip->ecc.write_oob) chip->ecc.write_oob = nand_write_oob_syndrome; - if (mtd->writesize >= chip->ecc.size) + if (mtd->writesize >= chip->ecc.size) { + if (!chip->ecc.strength) { + pr_warn("Driver must set ecc.strength when using hardware ECC\n"); + BUG(); + } break; + } pr_warn("%d byte HW ECC not possible on " "%d byte page size, fallback to SW ECC\n", chip->ecc.size, mtd->writesize); @@ -3385,7 +3402,7 @@ int nand_scan_tail(struct mtd_info *mtd) BUG(); } chip->ecc.strength = - chip->ecc.bytes*8 / fls(8*chip->ecc.size); + chip->ecc.bytes * 8 / fls(8 * chip->ecc.size); break; case NAND_ECC_NONE: @@ -3483,7 +3500,7 @@ int nand_scan_tail(struct mtd_info *mtd) /* propagate ecc info to mtd_info */ mtd->ecclayout = chip->ecc.layout; - mtd->ecc_strength = chip->ecc.strength * chip->ecc.steps; + mtd->ecc_strength = chip->ecc.strength; /* Check, if we should skip the bad block table scan */ if (chip->options & NAND_SKIP_BBTSCAN) diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c index 20a112f..30d1319 100644 --- a/drivers/mtd/nand/nand_bbt.c +++ b/drivers/mtd/nand/nand_bbt.c @@ -324,6 +324,7 @@ static int scan_read_raw_oob(struct mtd_info *mtd, uint8_t *buf, loff_t offs, buf += mtd->oobsize + mtd->writesize; len -= mtd->writesize; + offs += mtd->writesize; } return 0; } diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c index af4fe8c..621b70b 100644 --- a/drivers/mtd/nand/nand_ids.c +++ b/drivers/mtd/nand/nand_ids.c @@ -70,7 +70,7 @@ struct nand_flash_dev nand_flash_ids[] = { * These are the new chips with large page size. The pagesize and the * erasesize is determined from the extended id bytes */ -#define LP_OPTIONS (NAND_SAMSUNG_LP_OPTIONS | NAND_NO_READRDY | NAND_NO_AUTOINCR) +#define LP_OPTIONS (NAND_SAMSUNG_LP_OPTIONS | NAND_NO_READRDY) #define LP_OPTIONS16 (LP_OPTIONS | NAND_BUSWIDTH_16) /* 512 Megabit */ @@ -157,9 +157,7 @@ struct nand_flash_dev nand_flash_ids[] = { * writes possible, but not implemented now */ {"AND 128MiB 3,3V 8-bit", 0x01, 2048, 128, 0x4000, - NAND_IS_AND | NAND_NO_AUTOINCR |NAND_NO_READRDY | NAND_4PAGE_ARRAY | - BBT_AUTO_REFRESH - }, + NAND_IS_AND | NAND_NO_READRDY | NAND_4PAGE_ARRAY | BBT_AUTO_REFRESH}, {NULL,} }; diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c index 261f478..6cc8fbf 100644 --- a/drivers/mtd/nand/nandsim.c +++ b/drivers/mtd/nand/nandsim.c @@ -268,7 +268,6 @@ MODULE_PARM_DESC(bch, "Enable BCH ecc and set how many bits should " #define OPT_PAGE512 0x00000002 /* 512-byte page chips */ #define OPT_PAGE2048 0x00000008 /* 2048-byte page chips */ #define OPT_SMARTMEDIA 0x00000010 /* SmartMedia technology chips */ -#define OPT_AUTOINCR 0x00000020 /* page number auto incrementation is possible */ #define OPT_PAGE512_8BIT 0x00000040 /* 512-byte page chips with 8-bit bus width */ #define OPT_PAGE4096 0x00000080 /* 4096-byte page chips */ #define OPT_LARGEPAGE (OPT_PAGE2048 | OPT_PAGE4096) /* 2048 & 4096-byte page chips */ @@ -594,7 +593,7 @@ static int init_nandsim(struct mtd_info *mtd) ns->options |= OPT_PAGE256; } else if (ns->geom.pgsz == 512) { - ns->options |= (OPT_PAGE512 | OPT_AUTOINCR); + ns->options |= OPT_PAGE512; if (ns->busw == 8) ns->options |= OPT_PAGE512_8BIT; } else if (ns->geom.pgsz == 2048) { @@ -663,8 +662,6 @@ static int init_nandsim(struct mtd_info *mtd) for (i = 0; nand_flash_ids[i].name != NULL; i++) { if (second_id_byte != nand_flash_ids[i].id) continue; - if (!(nand_flash_ids[i].options & NAND_NO_AUTOINCR)) - ns->options |= OPT_AUTOINCR; } if (ns->busw == 16) @@ -1936,20 +1933,8 @@ static u_char ns_nand_read_byte(struct mtd_info *mtd) if (ns->regs.count == ns->regs.num) { NS_DBG("read_byte: all bytes were read\n"); - /* - * The OPT_AUTOINCR allows to read next consecutive pages without - * new read operation cycle. - */ - if ((ns->options & OPT_AUTOINCR) && NS_STATE(ns->state) == STATE_DATAOUT) { - ns->regs.count = 0; - if (ns->regs.row + 1 < ns->geom.pgnum) - ns->regs.row += 1; - NS_DBG("read_byte: switch to the next page (%#x)\n", ns->regs.row); - do_state_action(ns, ACTION_CPY); - } - else if (NS_STATE(ns->nxstate) == STATE_READY) + if (NS_STATE(ns->nxstate) == STATE_READY) switch_state(ns); - } return outb; @@ -2203,14 +2188,7 @@ static void ns_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) ns->regs.count += len; if (ns->regs.count == ns->regs.num) { - if ((ns->options & OPT_AUTOINCR) && NS_STATE(ns->state) == STATE_DATAOUT) { - ns->regs.count = 0; - if (ns->regs.row + 1 < ns->geom.pgnum) - ns->regs.row += 1; - NS_DBG("read_buf: switch to the next page (%#x)\n", ns->regs.row); - do_state_action(ns, ACTION_CPY); - } - else if (NS_STATE(ns->nxstate) == STATE_READY) + if (NS_STATE(ns->nxstate) == STATE_READY) switch_state(ns); } diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index c2b0bba..d7f681d 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -21,6 +21,10 @@ #include <linux/io.h> #include <linux/slab.h> +#ifdef CONFIG_MTD_NAND_OMAP_BCH +#include <linux/bch.h> +#endif + #include <plat/dma.h> #include <plat/gpmc.h> #include <plat/nand.h> @@ -127,6 +131,11 @@ struct omap_nand_info { } iomode; u_char *buf; int buf_len; + +#ifdef CONFIG_MTD_NAND_OMAP_BCH + struct bch_control *bch; + struct nand_ecclayout ecclayout; +#endif }; /** @@ -402,7 +411,7 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr, PREFETCH_FIFOTHRESHOLD_MAX, 0x1, len, is_write); if (ret) /* PFPW engine is busy, use cpu copy method */ - goto out_copy; + goto out_copy_unmap; init_completion(&info->comp); @@ -421,6 +430,8 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr, dma_unmap_single(&info->pdev->dev, dma_addr, len, dir); return 0; +out_copy_unmap: + dma_unmap_single(&info->pdev->dev, dma_addr, len, dir); out_copy: if (info->nand.options & NAND_BUSWIDTH_16) is_write == 0 ? omap_read_buf16(mtd, (u_char *) addr, len) @@ -879,7 +890,7 @@ static int omap_wait(struct mtd_info *mtd, struct nand_chip *chip) struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, mtd); unsigned long timeo = jiffies; - int status = NAND_STATUS_FAIL, state = this->state; + int status, state = this->state; if (state == FL_ERASING) timeo += (HZ * 400) / 1000; @@ -894,6 +905,8 @@ static int omap_wait(struct mtd_info *mtd, struct nand_chip *chip) break; cond_resched(); } + + status = gpmc_nand_read(info->gpmc_cs, GPMC_NAND_DATA); return status; } @@ -925,6 +938,226 @@ static int omap_dev_ready(struct mtd_info *mtd) return 1; } +#ifdef CONFIG_MTD_NAND_OMAP_BCH + +/** + * omap3_enable_hwecc_bch - Program OMAP3 GPMC to perform BCH ECC correction + * @mtd: MTD device structure + * @mode: Read/Write mode + */ +static void omap3_enable_hwecc_bch(struct mtd_info *mtd, int mode) +{ + int nerrors; + unsigned int dev_width; + struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, + mtd); + struct nand_chip *chip = mtd->priv; + + nerrors = (info->nand.ecc.bytes == 13) ? 8 : 4; + dev_width = (chip->options & NAND_BUSWIDTH_16) ? 1 : 0; + /* + * Program GPMC to perform correction on one 512-byte sector at a time. + * Using 4 sectors at a time (i.e. ecc.size = 2048) is also possible and + * gives a slight (5%) performance gain (but requires additional code). + */ + (void)gpmc_enable_hwecc_bch(info->gpmc_cs, mode, dev_width, 1, nerrors); +} + +/** + * omap3_calculate_ecc_bch4 - Generate 7 bytes of ECC bytes + * @mtd: MTD device structure + * @dat: The pointer to data on which ecc is computed + * @ecc_code: The ecc_code buffer + */ +static int omap3_calculate_ecc_bch4(struct mtd_info *mtd, const u_char *dat, + u_char *ecc_code) +{ + struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, + mtd); + return gpmc_calculate_ecc_bch4(info->gpmc_cs, dat, ecc_code); +} + +/** + * omap3_calculate_ecc_bch8 - Generate 13 bytes of ECC bytes + * @mtd: MTD device structure + * @dat: The pointer to data on which ecc is computed + * @ecc_code: The ecc_code buffer + */ +static int omap3_calculate_ecc_bch8(struct mtd_info *mtd, const u_char *dat, + u_char *ecc_code) +{ + struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, + mtd); + return gpmc_calculate_ecc_bch8(info->gpmc_cs, dat, ecc_code); +} + +/** + * omap3_correct_data_bch - Decode received data and correct errors + * @mtd: MTD device structure + * @data: page data + * @read_ecc: ecc read from nand flash + * @calc_ecc: ecc read from HW ECC registers + */ +static int omap3_correct_data_bch(struct mtd_info *mtd, u_char *data, + u_char *read_ecc, u_char *calc_ecc) +{ + int i, count; + /* cannot correct more than 8 errors */ + unsigned int errloc[8]; + struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, + mtd); + + count = decode_bch(info->bch, NULL, 512, read_ecc, calc_ecc, NULL, + errloc); + if (count > 0) { + /* correct errors */ + for (i = 0; i < count; i++) { + /* correct data only, not ecc bytes */ + if (errloc[i] < 8*512) + data[errloc[i]/8] ^= 1 << (errloc[i] & 7); + pr_debug("corrected bitflip %u\n", errloc[i]); + } + } else if (count < 0) { + pr_err("ecc unrecoverable error\n"); + } + return count; +} + +/** + * omap3_free_bch - Release BCH ecc resources + * @mtd: MTD device structure + */ +static void omap3_free_bch(struct mtd_info *mtd) +{ + struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, + mtd); + if (info->bch) { + free_bch(info->bch); + info->bch = NULL; + } +} + +/** + * omap3_init_bch - Initialize BCH ECC + * @mtd: MTD device structure + * @ecc_opt: OMAP ECC mode (OMAP_ECC_BCH4_CODE_HW or OMAP_ECC_BCH8_CODE_HW) + */ +static int omap3_init_bch(struct mtd_info *mtd, int ecc_opt) +{ + int ret, max_errors; + struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, + mtd); +#ifdef CONFIG_MTD_NAND_OMAP_BCH8 + const int hw_errors = 8; +#else + const int hw_errors = 4; +#endif + info->bch = NULL; + + max_errors = (ecc_opt == OMAP_ECC_BCH8_CODE_HW) ? 8 : 4; + if (max_errors != hw_errors) { + pr_err("cannot configure %d-bit BCH ecc, only %d-bit supported", + max_errors, hw_errors); + goto fail; + } + + /* initialize GPMC BCH engine */ + ret = gpmc_init_hwecc_bch(info->gpmc_cs, 1, max_errors); + if (ret) + goto fail; + + /* software bch library is only used to detect and locate errors */ + info->bch = init_bch(13, max_errors, 0x201b /* hw polynomial */); + if (!info->bch) + goto fail; + + info->nand.ecc.size = 512; + info->nand.ecc.hwctl = omap3_enable_hwecc_bch; + info->nand.ecc.correct = omap3_correct_data_bch; + info->nand.ecc.mode = NAND_ECC_HW; + + /* + * The number of corrected errors in an ecc block that will trigger + * block scrubbing defaults to the ecc strength (4 or 8). + * Set mtd->bitflip_threshold here to define a custom threshold. + */ + + if (max_errors == 8) { + info->nand.ecc.strength = 8; + info->nand.ecc.bytes = 13; + info->nand.ecc.calculate = omap3_calculate_ecc_bch8; + } else { + info->nand.ecc.strength = 4; + info->nand.ecc.bytes = 7; + info->nand.ecc.calculate = omap3_calculate_ecc_bch4; + } + + pr_info("enabling NAND BCH ecc with %d-bit correction\n", max_errors); + return 0; +fail: + omap3_free_bch(mtd); + return -1; +} + +/** + * omap3_init_bch_tail - Build an oob layout for BCH ECC correction. + * @mtd: MTD device structure + */ +static int omap3_init_bch_tail(struct mtd_info *mtd) +{ + int i, steps; + struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, + mtd); + struct nand_ecclayout *layout = &info->ecclayout; + + /* build oob layout */ + steps = mtd->writesize/info->nand.ecc.size; + layout->eccbytes = steps*info->nand.ecc.bytes; + + /* do not bother creating special oob layouts for small page devices */ + if (mtd->oobsize < 64) { + pr_err("BCH ecc is not supported on small page devices\n"); + goto fail; + } + + /* reserve 2 bytes for bad block marker */ + if (layout->eccbytes+2 > mtd->oobsize) { + pr_err("no oob layout available for oobsize %d eccbytes %u\n", + mtd->oobsize, layout->eccbytes); + goto fail; + } + + /* put ecc bytes at oob tail */ + for (i = 0; i < layout->eccbytes; i++) + layout->eccpos[i] = mtd->oobsize-layout->eccbytes+i; + + layout->oobfree[0].offset = 2; + layout->oobfree[0].length = mtd->oobsize-2-layout->eccbytes; + info->nand.ecc.layout = layout; + + if (!(info->nand.options & NAND_BUSWIDTH_16)) + info->nand.badblock_pattern = &bb_descrip_flashbased; + return 0; +fail: + omap3_free_bch(mtd); + return -1; +} + +#else +static int omap3_init_bch(struct mtd_info *mtd, int ecc_opt) +{ + pr_err("CONFIG_MTD_NAND_OMAP_BCH is not enabled\n"); + return -1; +} +static int omap3_init_bch_tail(struct mtd_info *mtd) +{ + return -1; +} +static void omap3_free_bch(struct mtd_info *mtd) +{ +} +#endif /* CONFIG_MTD_NAND_OMAP_BCH */ + static int __devinit omap_nand_probe(struct platform_device *pdev) { struct omap_nand_info *info; @@ -1063,6 +1296,13 @@ static int __devinit omap_nand_probe(struct platform_device *pdev) info->nand.ecc.hwctl = omap_enable_hwecc; info->nand.ecc.correct = omap_correct_data; info->nand.ecc.mode = NAND_ECC_HW; + } else if ((pdata->ecc_opt == OMAP_ECC_BCH4_CODE_HW) || + (pdata->ecc_opt == OMAP_ECC_BCH8_CODE_HW)) { + err = omap3_init_bch(&info->mtd, pdata->ecc_opt); + if (err) { + err = -EINVAL; + goto out_release_mem_region; + } } /* DIP switches on some boards change between 8 and 16 bit @@ -1094,6 +1334,14 @@ static int __devinit omap_nand_probe(struct platform_device *pdev) (offset + omap_oobinfo.eccbytes); info->nand.ecc.layout = &omap_oobinfo; + } else if ((pdata->ecc_opt == OMAP_ECC_BCH4_CODE_HW) || + (pdata->ecc_opt == OMAP_ECC_BCH8_CODE_HW)) { + /* build OOB layout for BCH ECC correction */ + err = omap3_init_bch_tail(&info->mtd); + if (err) { + err = -EINVAL; + goto out_release_mem_region; + } } /* second phase scan */ @@ -1122,6 +1370,7 @@ static int omap_nand_remove(struct platform_device *pdev) struct mtd_info *mtd = platform_get_drvdata(pdev); struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, mtd); + omap3_free_bch(&info->mtd); platform_set_drvdata(pdev, NULL); if (info->dma_ch != -1) diff --git a/drivers/mtd/nand/pasemi_nand.c b/drivers/mtd/nand/pasemi_nand.c index 974dbf8..1440e51 100644 --- a/drivers/mtd/nand/pasemi_nand.c +++ b/drivers/mtd/nand/pasemi_nand.c @@ -155,7 +155,6 @@ static int __devinit pasemi_nand_probe(struct platform_device *ofdev) chip->ecc.mode = NAND_ECC_SOFT; /* Enable the following for a flash based bad block table */ - chip->options = NAND_NO_AUTOINCR; chip->bbt_options = NAND_BBT_USE_FLASH; /* Scan to find existence of the device */ diff --git a/drivers/mtd/nand/plat_nand.c b/drivers/mtd/nand/plat_nand.c index 6404e6e..1bcb520 100644 --- a/drivers/mtd/nand/plat_nand.c +++ b/drivers/mtd/nand/plat_nand.c @@ -23,14 +23,18 @@ struct plat_nand_data { void __iomem *io_base; }; +static const char *part_probe_types[] = { "cmdlinepart", NULL }; + /* * Probe for the NAND device. */ static int __devinit plat_nand_probe(struct platform_device *pdev) { struct platform_nand_data *pdata = pdev->dev.platform_data; + struct mtd_part_parser_data ppdata; struct plat_nand_data *data; struct resource *res; + const char **part_types; int err = 0; if (pdata->chip.nr_chips < 1) { @@ -75,6 +79,7 @@ static int __devinit plat_nand_probe(struct platform_device *pdev) data->chip.select_chip = pdata->ctrl.select_chip; data->chip.write_buf = pdata->ctrl.write_buf; data->chip.read_buf = pdata->ctrl.read_buf; + data->chip.read_byte = pdata->ctrl.read_byte; data->chip.chip_delay = pdata->chip.chip_delay; data->chip.options |= pdata->chip.options; data->chip.bbt_options |= pdata->chip.bbt_options; @@ -98,8 +103,10 @@ static int __devinit plat_nand_probe(struct platform_device *pdev) goto out; } - err = mtd_device_parse_register(&data->mtd, - pdata->chip.part_probe_types, NULL, + part_types = pdata->chip.part_probe_types ? : part_probe_types; + + ppdata.of_node = pdev->dev.of_node; + err = mtd_device_parse_register(&data->mtd, part_types, &ppdata, pdata->chip.partitions, pdata->chip.nr_partitions); @@ -140,12 +147,19 @@ static int __devexit plat_nand_remove(struct platform_device *pdev) return 0; } +static const struct of_device_id plat_nand_match[] = { + { .compatible = "gen_nand" }, + {}, +}; +MODULE_DEVICE_TABLE(of, plat_nand_match); + static struct platform_driver plat_nand_driver = { - .probe = plat_nand_probe, - .remove = __devexit_p(plat_nand_remove), - .driver = { - .name = "gen_nand", - .owner = THIS_MODULE, + .probe = plat_nand_probe, + .remove = __devexit_p(plat_nand_remove), + .driver = { + .name = "gen_nand", + .owner = THIS_MODULE, + .of_match_table = plat_nand_match, }, }; diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index def50ca..252aaef 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -682,14 +682,15 @@ static void pxa3xx_nand_cmdfunc(struct mtd_info *mtd, unsigned command, } static void pxa3xx_nand_write_page_hwecc(struct mtd_info *mtd, - struct nand_chip *chip, const uint8_t *buf) + struct nand_chip *chip, const uint8_t *buf, int oob_required) { chip->write_buf(mtd, buf, mtd->writesize); chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); } static int pxa3xx_nand_read_page_hwecc(struct mtd_info *mtd, - struct nand_chip *chip, uint8_t *buf, int page) + struct nand_chip *chip, uint8_t *buf, int oob_required, + int page) { struct pxa3xx_nand_host *host = mtd->priv; struct pxa3xx_nand_info *info = host->info_data; @@ -1004,7 +1005,6 @@ KEEP_CONFIG: chip->ecc.size = host->page_size; chip->ecc.strength = 1; - chip->options = NAND_NO_AUTOINCR; chip->options |= NAND_NO_READRDY; if (host->reg_ndcr & NDCR_DWIDTH_M) chip->options |= NAND_BUSWIDTH_16; diff --git a/drivers/mtd/nand/r852.c b/drivers/mtd/nand/r852.c index c204018..8cb6277 100644 --- a/drivers/mtd/nand/r852.c +++ b/drivers/mtd/nand/r852.c @@ -539,14 +539,11 @@ exit: * nand_read_oob_syndrome assumes we can send column address - we can't */ static int r852_read_oob(struct mtd_info *mtd, struct nand_chip *chip, - int page, int sndcmd) + int page) { - if (sndcmd) { - chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page); - sndcmd = 0; - } + chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page); chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); - return sndcmd; + return 0; } /* @@ -1104,18 +1101,7 @@ static struct pci_driver r852_pci_driver = { .driver.pm = &r852_pm_ops, }; -static __init int r852_module_init(void) -{ - return pci_register_driver(&r852_pci_driver); -} - -static void __exit r852_module_exit(void) -{ - pci_unregister_driver(&r852_pci_driver); -} - -module_init(r852_module_init); -module_exit(r852_module_exit); +module_pci_driver(r852_pci_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Maxim Levitsky <maximlevitsky@gmail.com>"); diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c index e9b2b26..aa9b8a5 100644 --- a/drivers/mtd/nand/sh_flctl.c +++ b/drivers/mtd/nand/sh_flctl.c @@ -344,7 +344,7 @@ static void set_cmd_regs(struct mtd_info *mtd, uint32_t cmd, uint32_t flcmcdr_va } static int flctl_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, - uint8_t *buf, int page) + uint8_t *buf, int oob_required, int page) { int i, eccsize = chip->ecc.size; int eccbytes = chip->ecc.bytes; @@ -359,14 +359,14 @@ static int flctl_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, if (flctl->hwecc_cant_correct[i]) mtd->ecc_stats.failed++; else - mtd->ecc_stats.corrected += 0; + mtd->ecc_stats.corrected += 0; /* FIXME */ } return 0; } static void flctl_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, - const uint8_t *buf) + const uint8_t *buf, int oob_required) { int i, eccsize = chip->ecc.size; int eccbytes = chip->ecc.bytes; @@ -881,8 +881,6 @@ static int __devinit flctl_probe(struct platform_device *pdev) flctl->hwecc = pdata->has_hwecc; flctl->holden = pdata->use_holden; - nand->options = NAND_NO_AUTOINCR; - /* Set address of hardware control function */ /* 20 us command delay time */ nand->chip_delay = 20; diff --git a/drivers/mtd/nand/sm_common.c b/drivers/mtd/nand/sm_common.c index 774c3c2..082bcdc 100644 --- a/drivers/mtd/nand/sm_common.c +++ b/drivers/mtd/nand/sm_common.c @@ -94,17 +94,16 @@ static struct nand_flash_dev nand_smartmedia_flash_ids[] = { {NULL,} }; -#define XD_TYPEM (NAND_NO_AUTOINCR | NAND_BROKEN_XD) static struct nand_flash_dev nand_xd_flash_ids[] = { {"xD 16MiB 3,3V", 0x73, 512, 16, 0x4000, 0}, {"xD 32MiB 3,3V", 0x75, 512, 32, 0x4000, 0}, {"xD 64MiB 3,3V", 0x76, 512, 64, 0x4000, 0}, {"xD 128MiB 3,3V", 0x79, 512, 128, 0x4000, 0}, - {"xD 256MiB 3,3V", 0x71, 512, 256, 0x4000, XD_TYPEM}, - {"xD 512MiB 3,3V", 0xdc, 512, 512, 0x4000, XD_TYPEM}, - {"xD 1GiB 3,3V", 0xd3, 512, 1024, 0x4000, XD_TYPEM}, - {"xD 2GiB 3,3V", 0xd5, 512, 2048, 0x4000, XD_TYPEM}, + {"xD 256MiB 3,3V", 0x71, 512, 256, 0x4000, NAND_BROKEN_XD}, + {"xD 512MiB 3,3V", 0xdc, 512, 512, 0x4000, NAND_BROKEN_XD}, + {"xD 1GiB 3,3V", 0xd3, 512, 1024, 0x4000, NAND_BROKEN_XD}, + {"xD 2GiB 3,3V", 0xd5, 512, 2048, 0x4000, NAND_BROKEN_XD}, {NULL,} }; diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c index b3ce12e..7153e0d2 100644 --- a/drivers/mtd/onenand/onenand_base.c +++ b/drivers/mtd/onenand/onenand_base.c @@ -1201,7 +1201,8 @@ static int onenand_mlc_read_ops_nolock(struct mtd_info *mtd, loff_t from, if (mtd->ecc_stats.failed - stats.failed) return -EBADMSG; - return mtd->ecc_stats.corrected - stats.corrected ? -EUCLEAN : 0; + /* return max bitflips per ecc step; ONENANDs correct 1 bit only */ + return mtd->ecc_stats.corrected != stats.corrected ? 1 : 0; } /** @@ -1333,7 +1334,8 @@ static int onenand_read_ops_nolock(struct mtd_info *mtd, loff_t from, if (mtd->ecc_stats.failed - stats.failed) return -EBADMSG; - return mtd->ecc_stats.corrected - stats.corrected ? -EUCLEAN : 0; + /* return max bitflips per ecc step; ONENANDs correct 1 bit only */ + return mtd->ecc_stats.corrected != stats.corrected ? 1 : 0; } /** |