ARM: clps711x: autcpu12: Special driver for handling NAND memory is removed

This patch provide migration to using "gpio-nand" and "basic-mmio-gpio"
drivers instead of using special driver for handling NAND memory.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Olof Johansson <olof@lixom.net>

3 files changed, 0 insertions, 245 deletions

diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 4883139..e6e0a82 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -49,13 +49,6 @@ config MTD_NAND_MUSEUM_IDS
 	  NAND chips (page size 256 byte, erase size 4-8KiB). The IDs
 	  of these chips were reused by later, larger chips.
 
-config MTD_NAND_AUTCPU12
-	tristate "SmartMediaCard on autronix autcpu12 board"
-	depends on ARCH_AUTCPU12
-	help
-	  This enables the driver for the autronix autcpu12 board to
-	  access the SmartMediaCard.
-
 config MTD_NAND_DENALI
        depends on PCI
         tristate "Support Denali NAND controller on Intel Moorestown"
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 2cbd091..0b1fca2 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -11,7 +11,6 @@ obj-$(CONFIG_MTD_SM_COMMON) 		+= sm_common.o
 obj-$(CONFIG_MTD_NAND_CAFE)		+= cafe_nand.o
 obj-$(CONFIG_MTD_NAND_SPIA)		+= spia.o
 obj-$(CONFIG_MTD_NAND_AMS_DELTA)	+= ams-delta.o
-obj-$(CONFIG_MTD_NAND_AUTCPU12)		+= autcpu12.o
 obj-$(CONFIG_MTD_NAND_DENALI)		+= denali.o
 obj-$(CONFIG_MTD_NAND_AU1550)		+= au1550nd.o
 obj-$(CONFIG_MTD_NAND_BF5XX)		+= bf5xx_nand.o
diff --git a/drivers/mtd/nand/autcpu12.c b/drivers/mtd/nand/autcpu12.c
deleted file mode 100644
index 04769a4..0000000
--- a/drivers/mtd/nand/autcpu12.c
+++ /dev/null
@@ -1,237 +0,0 @@
-/*
- *  drivers/mtd/autcpu12.c
- *
- *  Copyright (c) 2002 Thomas Gleixner <tgxl@linutronix.de>
- *
- *  Derived from drivers/mtd/spia.c
- *	 Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Overview:
- *   This is a device driver for the NAND flash device found on the
- *   autronix autcpu12 board, which is a SmartMediaCard. It supports
- *   16MiB, 32MiB and 64MiB cards.
- *
- *
- *	02-12-2002 TG	Cleanup of module params
- *
- *	02-20-2002 TG	adjusted for different rd/wr address support
- *			added support for read device ready/busy line
- *			added page_cache
- *
- *	10-06-2002 TG	128K card support added
- */
-
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <asm/io.h>
-#include <mach/hardware.h>
-#include <asm/sizes.h>
-#include <mach/autcpu12.h>
-
-/*
- * MTD structure for AUTCPU12 board
- */
-static struct mtd_info *autcpu12_mtd = NULL;
-static void __iomem *autcpu12_fio_base;
-
-/*
- * Define partitions for flash devices
- */
-static struct mtd_partition partition_info16k[] = {
-	{ .name		= "AUTCPU12 flash partition 1",
-	  .offset	= 0,
-	  .size		= 8 * SZ_1M },
-	{ .name		= "AUTCPU12 flash partition 2",
-	  .offset	= 8 * SZ_1M,
-	  .size		= 8 * SZ_1M },
-};
-
-static struct mtd_partition partition_info32k[] = {
-	{ .name		= "AUTCPU12 flash partition 1",
-	  .offset	= 0,
-	  .size		= 8 * SZ_1M },
-	{ .name		= "AUTCPU12 flash partition 2",
-	  .offset	= 8 * SZ_1M,
-	  .size		= 24 * SZ_1M },
-};
-
-static struct mtd_partition partition_info64k[] = {
-	{ .name		= "AUTCPU12 flash partition 1",
-	  .offset	= 0,
-	  .size		= 16 * SZ_1M },
-	{ .name		= "AUTCPU12 flash partition 2",
-	  .offset	= 16 * SZ_1M,
-	  .size		= 48 * SZ_1M },
-};
-
-static struct mtd_partition partition_info128k[] = {
-	{ .name		= "AUTCPU12 flash partition 1",
-	  .offset	= 0,
-	  .size		= 16 * SZ_1M },
-	{ .name		= "AUTCPU12 flash partition 2",
-	  .offset	= 16 * SZ_1M,
-	  .size		= 112 * SZ_1M },
-};
-
-#define NUM_PARTITIONS16K 2
-#define NUM_PARTITIONS32K 2
-#define NUM_PARTITIONS64K 2
-#define NUM_PARTITIONS128K 2
-/*
- *	hardware specific access to control-lines
- *
- *	ALE bit 4 autcpu12_pedr
- *	CLE bit 5 autcpu12_pedr
- *	NCE bit 0 fio_ctrl
- *
- */
-static void autcpu12_hwcontrol(struct mtd_info *mtd, int cmd,
-			       unsigned int ctrl)
-{
-	struct nand_chip *chip = mtd->priv;
-
-	if (ctrl & NAND_CTRL_CHANGE) {
-		void __iomem *addr;
-		unsigned char bits;
-
-		bits = clps_readb(AUTCPU12_SMC_PORT_OFFSET) & ~0x30;
-		bits |= (ctrl & NAND_CLE) << 4;
-		bits |= (ctrl & NAND_ALE) << 2;
-		clps_writeb(bits, AUTCPU12_SMC_PORT_OFFSET);
-
-		addr = autcpu12_fio_base + AUTCPU12_SMC_SELECT_OFFSET;
-		writeb((readb(addr) & ~0x1) | (ctrl & NAND_NCE), addr);
-	}
-
-	if (cmd != NAND_CMD_NONE)
-		writeb(cmd, chip->IO_ADDR_W);
-}
-
-/*
- *	read device ready pin
- */
-int autcpu12_device_ready(struct mtd_info *mtd)
-{
-	return clps_readb(AUTCPU12_SMC_PORT_OFFSET) & AUTCPU12_SMC_RDY;
-}
-
-/*
- * Main initialization routine
- */
-static int __init autcpu12_init(void)
-{
-	struct nand_chip *this;
-	int err = 0;
-
-	/* Allocate memory for MTD device structure and private data */
-	autcpu12_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip),
-			       GFP_KERNEL);
-	if (!autcpu12_mtd) {
-		printk("Unable to allocate AUTCPU12 NAND MTD device structure.\n");
-		err = -ENOMEM;
-		goto out;
-	}
-
-	/* map physical address */
-	autcpu12_fio_base = ioremap(AUTCPU12_PHYS_SMC, SZ_1K);
-	if (!autcpu12_fio_base) {
-		printk("Ioremap autcpu12 SmartMedia Card failed\n");
-		err = -EIO;
-		goto out_mtd;
-	}
-
-	/* Get pointer to private data */
-	this = (struct nand_chip *)(&autcpu12_mtd[1]);
-
-	/* Initialize structures */
-	memset(autcpu12_mtd, 0, sizeof(struct mtd_info));
-	memset(this, 0, sizeof(struct nand_chip));
-
-	/* Link the private data with the MTD structure */
-	autcpu12_mtd->priv = this;
-	autcpu12_mtd->owner = THIS_MODULE;
-
-	/* Set address of NAND IO lines */
-	this->IO_ADDR_R = autcpu12_fio_base;
-	this->IO_ADDR_W = autcpu12_fio_base;
-	this->cmd_ctrl = autcpu12_hwcontrol;
-	this->dev_ready = autcpu12_device_ready;
-	/* 20 us command delay time */
-	this->chip_delay = 20;
-	this->ecc.mode = NAND_ECC_SOFT;
-
-	/* Enable the following for a flash based bad block table */
-	/*
-	   this->bbt_options = NAND_BBT_USE_FLASH;
-	 */
-	this->bbt_options = NAND_BBT_USE_FLASH;
-
-	/* Scan to find existence of the device */
-	if (nand_scan(autcpu12_mtd, 1)) {
-		err = -ENXIO;
-		goto out_ior;
-	}
-
-	/* Register the partitions */
-	switch (autcpu12_mtd->size) {
-		case SZ_16M:
-			mtd_device_register(autcpu12_mtd, partition_info16k,
-					    NUM_PARTITIONS16K);
-			break;
-		case SZ_32M:
-			mtd_device_register(autcpu12_mtd, partition_info32k,
-					    NUM_PARTITIONS32K);
-			break;
-		case SZ_64M:
-			mtd_device_register(autcpu12_mtd, partition_info64k,
-					    NUM_PARTITIONS64K);
-			break;
-		case SZ_128M:
-			mtd_device_register(autcpu12_mtd, partition_info128k,
-					    NUM_PARTITIONS128K);
-			break;
-		default:
-			printk("Unsupported SmartMedia device\n");
-			err = -ENXIO;
-			goto out_ior;
-	}
-	goto out;
-
- out_ior:
-	iounmap(autcpu12_fio_base);
- out_mtd:
-	kfree(autcpu12_mtd);
- out:
-	return err;
-}
-
-module_init(autcpu12_init);
-
-/*
- * Clean up routine
- */
-static void __exit autcpu12_cleanup(void)
-{
-	/* Release resources, unregister device */
-	nand_release(autcpu12_mtd);
-
-	/* unmap physical address */
-	iounmap(autcpu12_fio_base);
-
-	/* Free the MTD device structure */
-	kfree(autcpu12_mtd);
-}
-
-module_exit(autcpu12_cleanup);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Thomas Gleixner <tglx@linutronix.de>");
-MODULE_DESCRIPTION("Glue layer for SmartMediaCard on autronix autcpu12");