[MTD] OneNAND: Add support for auto-placement of out-of-band data

Enable the use of oob operation mode MTD_OOB_AUTO with OneNAND.
Note that MTD_OOB_RAW is still not supported.

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

2 files changed, 171 insertions, 37 deletions

diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index daf2989..67efbc7 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -787,20 +787,60 @@ static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len,
 }
 
 /**
+ * onenand_transfer_auto_oob - [Internal] oob auto-placement transfer
+ * @param mtd		MTD device structure
+ * @param buf		destination address
+ * @param column	oob offset to read from
+ * @param thislen	oob length to read
+ */
+static int onenand_transfer_auto_oob(struct mtd_info *mtd, uint8_t *buf, int column,
+				int thislen)
+{
+	struct onenand_chip *this = mtd->priv;
+	struct nand_oobfree *free;
+	int readcol = column;
+	int readend = column + thislen;
+	int lastgap = 0;
+	uint8_t *oob_buf = this->page_buf + mtd->writesize;
+
+	for (free = this->ecclayout->oobfree; free->length; ++free) {
+		if (readcol >= lastgap)
+			readcol += free->offset - lastgap;
+		if (readend >= lastgap)
+			readend += free->offset - lastgap;
+		lastgap = free->offset + free->length;
+	}
+	this->read_bufferram(mtd, ONENAND_SPARERAM, oob_buf + readcol,
+			     readcol, readend - readcol);
+	for (free = this->ecclayout->oobfree; free->length; ++free) {
+		int free_end = free->offset + free->length;
+		if (free->offset < readend && free_end > readcol) {
+			int st = max_t(int,free->offset,readcol);
+			int ed = min_t(int,free_end,readend);
+			int n = ed - st;
+			memcpy(buf, oob_buf + st, n);
+			buf += n;
+		}
+	}
+	return 0;
+}
+
+/**
  * onenand_do_read_oob - [MTD Interface] OneNAND read out-of-band
  * @param mtd		MTD device structure
  * @param from		offset to read from
  * @param len		number of bytes to read
  * @param retlen	pointer to variable to store the number of read bytes
  * @param buf		the databuffer to put data
+ * @param mode		operation mode
  *
  * OneNAND read out-of-band data from the spare area
  */
 int onenand_do_read_oob(struct mtd_info *mtd, loff_t from, size_t len,
-			size_t *retlen, u_char *buf)
+			size_t *retlen, u_char *buf, mtd_oob_mode_t mode)
 {
 	struct onenand_chip *this = mtd->priv;
-	int read = 0, thislen, column;
+	int read = 0, thislen, column, oobsize;
 	int ret = 0;
 
 	DEBUG(MTD_DEBUG_LEVEL3, "onenand_read_oob: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
@@ -808,21 +848,33 @@ int onenand_do_read_oob(struct mtd_info *mtd, loff_t from, size_t len,
 	/* Initialize return length value */
 	*retlen = 0;
 
+	if (mode == MTD_OOB_AUTO)
+		oobsize = this->ecclayout->oobavail;
+	else
+		oobsize = mtd->oobsize;
+
+	column = from & (mtd->oobsize - 1);
+
+	if (unlikely(column >= oobsize)) {
+		DEBUG(MTD_DEBUG_LEVEL0, "onenand_read_oob: Attempted to start read outside oob\n");
+		return -EINVAL;
+	}
+
 	/* Do not allow reads past end of device */
-	if (unlikely((from + len) > mtd->size)) {
-		DEBUG(MTD_DEBUG_LEVEL0, "onenand_read_oob: Attempt read beyond end of device\n");
+	if (unlikely(from >= mtd->size ||
+		     column + len > ((mtd->size >> this->page_shift) -
+				     (from >> this->page_shift)) * oobsize)) {
+		DEBUG(MTD_DEBUG_LEVEL0, "onenand_read_oob: Attempted to read beyond end of device\n");
 		return -EINVAL;
 	}
 
 	/* Grab the lock and see if the device is available */
 	onenand_get_device(mtd, FL_READING);
 
-	column = from & (mtd->oobsize - 1);
-
 	while (read < len) {
 		cond_resched();
 
-		thislen = mtd->oobsize - column;
+		thislen = oobsize - column;
 		thislen = min_t(int, thislen, len);
 
 		this->command(mtd, ONENAND_CMD_READOOB, from, mtd->oobsize);
@@ -832,7 +884,10 @@ int onenand_do_read_oob(struct mtd_info *mtd, loff_t from, size_t len,
 		ret = this->wait(mtd, FL_READING);
 		/* First copy data and check return value for ECC handling */
 
-		this->read_bufferram(mtd, ONENAND_SPARERAM, buf, column, thislen);
+		if (mode == MTD_OOB_AUTO)
+			onenand_transfer_auto_oob(mtd, buf, column, thislen);
+		else
+			this->read_bufferram(mtd, ONENAND_SPARERAM, buf, column, thislen);
 
 		if (ret) {
 			DEBUG(MTD_DEBUG_LEVEL0, "onenand_read_oob: read failed = 0x%x\n", ret);
@@ -871,10 +926,18 @@ out:
 static int onenand_read_oob(struct mtd_info *mtd, loff_t from,
 			    struct mtd_oob_ops *ops)
 {
-	BUG_ON(ops->mode != MTD_OOB_PLACE);
-
+	switch (ops->mode)
+	{
+	case MTD_OOB_PLACE:
+	case MTD_OOB_AUTO:
+		break;
+	case MTD_OOB_RAW:
+		return -EINVAL; /* Not implemented yet */
+	default:
+		return -EINVAL;
+	}
 	return onenand_do_read_oob(mtd, from + ops->ooboffs, ops->ooblen,
-				   &ops->oobretlen, ops->oobbuf);
+				   &ops->oobretlen, ops->oobbuf, ops->mode);
 }
 
 #ifdef CONFIG_MTD_ONENAND_VERIFY_WRITE
@@ -883,14 +946,12 @@ static int onenand_read_oob(struct mtd_info *mtd, loff_t from,
  * @param mtd		MTD device structure
  * @param buf		the databuffer to verify
  * @param to		offset to read from
- * @param len		number of bytes to read and compare
  *
  */
-static int onenand_verify_oob(struct mtd_info *mtd, const u_char *buf, loff_t to, int len)
+static int onenand_verify_oob(struct mtd_info *mtd, const u_char *buf, loff_t to)
 {
 	struct onenand_chip *this = mtd->priv;
-	char *readp = this->page_buf;
-	int column = to & (mtd->oobsize - 1);
+	char *readp = this->page_buf + mtd->writesize;
 	int status, i;
 
 	this->command(mtd, ONENAND_CMD_READOOB, to, mtd->oobsize);
@@ -899,9 +960,8 @@ static int onenand_verify_oob(struct mtd_info *mtd, const u_char *buf, loff_t to
 	if (status)
 		return status;
 
-	this->read_bufferram(mtd, ONENAND_SPARERAM, readp, column, len);
-
-	for(i = 0; i < len; i++)
+	this->read_bufferram(mtd, ONENAND_SPARERAM, readp, 0, mtd->oobsize);
+	for(i = 0; i < mtd->oobsize; i++)
 		if (buf[i] != 0xFF && buf[i] != readp[i])
 			return -EBADMSG;
 
@@ -1060,20 +1120,59 @@ static int onenand_write(struct mtd_info *mtd, loff_t to, size_t len,
 }
 
 /**
+ * onenand_fill_auto_oob - [Internal] oob auto-placement transfer
+ * @param mtd		MTD device structure
+ * @param oob_buf	oob buffer
+ * @param buf		source address
+ * @param column	oob offset to write to
+ * @param thislen	oob length to write
+ */
+static int onenand_fill_auto_oob(struct mtd_info *mtd, u_char *oob_buf,
+				  const u_char *buf, int column, int thislen)
+{
+	struct onenand_chip *this = mtd->priv;
+	struct nand_oobfree *free;
+	int writecol = column;
+	int writeend = column + thislen;
+	int lastgap = 0;
+
+	for (free = this->ecclayout->oobfree; free->length; ++free) {
+		if (writecol >= lastgap)
+			writecol += free->offset - lastgap;
+		if (writeend >= lastgap)
+			writeend += free->offset - lastgap;
+		lastgap = free->offset + free->length;
+	}
+	writeend = mtd->oobsize;
+	for (free = this->ecclayout->oobfree; free->length; ++free) {
+		int free_end = free->offset + free->length;
+		if (free->offset < writeend && free_end > writecol) {
+			int st = max_t(int,free->offset,writecol);
+			int ed = min_t(int,free_end,writeend);
+			int n = ed - st;
+			memcpy(oob_buf + st, buf, n);
+			buf += n;
+		}
+	}
+	return 0;
+}
+
+/**
  * onenand_do_write_oob - [Internal] OneNAND write out-of-band
  * @param mtd		MTD device structure
  * @param to		offset to write to
  * @param len		number of bytes to write
  * @param retlen	pointer to variable to store the number of written bytes
  * @param buf		the data to write
+ * @param mode		operation mode
  *
  * OneNAND write out-of-band
  */
 static int onenand_do_write_oob(struct mtd_info *mtd, loff_t to, size_t len,
-				size_t *retlen, const u_char *buf)
+				size_t *retlen, const u_char *buf, mtd_oob_mode_t mode)
 {
 	struct onenand_chip *this = mtd->priv;
-	int column, ret = 0;
+	int column, ret = 0, oobsize;
 	int written = 0;
 
 	DEBUG(MTD_DEBUG_LEVEL3, "onenand_write_oob: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len);
@@ -1081,9 +1180,23 @@ static int onenand_do_write_oob(struct mtd_info *mtd, loff_t to, size_t len,
 	/* Initialize retlen, in case of early exit */
 	*retlen = 0;
 
-	/* Do not allow writes past end of device */
-	if (unlikely((to + len) > mtd->size)) {
-		DEBUG(MTD_DEBUG_LEVEL0, "onenand_write_oob: Attempt write to past end of device\n");
+	if (mode == MTD_OOB_AUTO)
+		oobsize = this->ecclayout->oobavail;
+	else
+		oobsize = mtd->oobsize;
+
+	column = to & (mtd->oobsize - 1);
+
+	if (unlikely(column >= oobsize)) {
+		DEBUG(MTD_DEBUG_LEVEL0, "onenand_write_oob: Attempted to start write outside oob\n");
+		return -EINVAL;
+	}
+
+	/* Do not allow reads past end of device */
+	if (unlikely(to >= mtd->size ||
+		     column + len > ((mtd->size >> this->page_shift) -
+				     (to >> this->page_shift)) * oobsize)) {
+		DEBUG(MTD_DEBUG_LEVEL0, "onenand_write_oob: Attempted to write past end of device\n");
 		return -EINVAL;
 	}
 
@@ -1092,18 +1205,19 @@ static int onenand_do_write_oob(struct mtd_info *mtd, loff_t to, size_t len,
 
 	/* Loop until all data write */
 	while (written < len) {
-		int thislen = min_t(int, mtd->oobsize, len - written);
+		int thislen = min_t(int, oobsize, len - written);
 
 		cond_resched();
 
-		column = to & (mtd->oobsize - 1);
-
 		this->command(mtd, ONENAND_CMD_BUFFERRAM, to, mtd->oobsize);
 
 		/* We send data to spare ram with oobsize
 		 * to prevent byte access */
 		memset(this->page_buf, 0xff, mtd->oobsize);
-		memcpy(this->page_buf + column, buf, thislen);
+		if (mode == MTD_OOB_AUTO)
+			onenand_fill_auto_oob(mtd, this->page_buf, buf, column, thislen);
+		else
+			memcpy(this->page_buf + column, buf, thislen);
 		this->write_bufferram(mtd, ONENAND_SPARERAM, this->page_buf, 0, mtd->oobsize);
 
 		this->command(mtd, ONENAND_CMD_PROGOOB, to, mtd->oobsize);
@@ -1112,11 +1226,11 @@ static int onenand_do_write_oob(struct mtd_info *mtd, loff_t to, size_t len,
 
 		ret = this->wait(mtd, FL_WRITING);
 		if (ret) {
-			DEBUG(MTD_DEBUG_LEVEL0, "onenand_write_oob: write filaed %d\n", ret);
+			DEBUG(MTD_DEBUG_LEVEL0, "onenand_write_oob: write failed %d\n", ret);
 			goto out;
 		}
 
-		ret = onenand_verify_oob(mtd, buf, to, thislen);
+		ret = onenand_verify_oob(mtd, this->page_buf, to);
 		if (ret) {
 			DEBUG(MTD_DEBUG_LEVEL0, "onenand_write_oob: verify failed %d\n", ret);
 			goto out;
@@ -1127,8 +1241,9 @@ static int onenand_do_write_oob(struct mtd_info *mtd, loff_t to, size_t len,
 		if (written == len)
 			break;
 
-		to += thislen;
+		to += mtd->writesize;
 		buf += thislen;
+		column = 0;
 	}
 
 out:
@@ -1149,10 +1264,18 @@ out:
 static int onenand_write_oob(struct mtd_info *mtd, loff_t to,
 			     struct mtd_oob_ops *ops)
 {
-	BUG_ON(ops->mode != MTD_OOB_PLACE);
-
+	switch (ops->mode)
+	{
+	case MTD_OOB_PLACE:
+	case MTD_OOB_AUTO:
+		break;
+	case MTD_OOB_RAW:
+		return -EINVAL; /* Not implemented yet */
+	default:
+		return -EINVAL;
+	}
 	return onenand_do_write_oob(mtd, to + ops->ooboffs, ops->ooblen,
-				    &ops->oobretlen, ops->oobbuf);
+				    &ops->oobretlen, ops->oobbuf, ops->mode);
 }
 
 /**
@@ -1318,7 +1441,7 @@ static int onenand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
 
         /* We write two bytes, so we dont have to mess with 16 bit access */
         ofs += mtd->oobsize + (bbm->badblockpos & ~0x01);
-        return onenand_do_write_oob(mtd, ofs , 2, &retlen, buf);
+        return onenand_do_write_oob(mtd, ofs , 2, &retlen, buf, MTD_OOB_PLACE);
 }
 
 /**
@@ -1612,7 +1735,7 @@ static int do_otp_lock(struct mtd_info *mtd, loff_t from, size_t len,
 	this->command(mtd, ONENAND_CMD_OTP_ACCESS, 0, 0);
 	this->wait(mtd, FL_OTPING);
 
-	ret = onenand_do_write_oob(mtd, from, len, retlen, buf);
+	ret = onenand_do_write_oob(mtd, from, len, retlen, buf, MTD_OOB_PLACE);
 
 	/* Exit OTP access mode */
 	this->command(mtd, ONENAND_CMD_RESET, 0, 0);
@@ -2019,6 +2142,7 @@ static void onenand_resume(struct mtd_info *mtd)
  */
 int onenand_scan(struct mtd_info *mtd, int maxchips)
 {
+	int i;
 	struct onenand_chip *this = mtd->priv;
 
 	if (!this->read_word)
@@ -2090,6 +2214,16 @@ int onenand_scan(struct mtd_info *mtd, int maxchips)
 	}
 
 	this->subpagesize = mtd->writesize >> mtd->subpage_sft;
+
+	/*
+	 * The number of bytes available for a client to place data into
+	 * the out of band area
+	 */
+	this->ecclayout->oobavail = 0;
+	for (i = 0; this->ecclayout->oobfree[i].length; i++)
+		this->ecclayout->oobavail +=
+			this->ecclayout->oobfree[i].length;
+
 	mtd->ecclayout = this->ecclayout;
 
 	/* Fill in remaining MTD driver data */
diff --git a/drivers/mtd/onenand/onenand_bbt.c b/drivers/mtd/onenand/onenand_bbt.c
index aa46b7f..acea9a1 100644
--- a/drivers/mtd/onenand/onenand_bbt.c
+++ b/drivers/mtd/onenand/onenand_bbt.c
@@ -18,7 +18,7 @@
 #include <linux/mtd/compatmac.h>
 
 extern int onenand_do_read_oob(struct mtd_info *mtd, loff_t from, size_t len,
-			       size_t *retlen, u_char *buf);
+			       size_t *retlen, u_char *buf, mtd_oob_mode_t mode);
 
 /**
  * check_short_pattern - [GENERIC] check if a pattern is in the buffer
@@ -91,7 +91,7 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr
 			/* No need to read pages fully,
 			 * just read required OOB bytes */
 			ret = onenand_do_read_oob(mtd, from + j * mtd->writesize + bd->offs,
-						  readlen, &retlen, &buf[0]);
+						  readlen, &retlen, &buf[0], MTD_OOB_PLACE);
 
 			/* If it is a initial bad block, just ignore it */
 			if (ret && !(ret & ONENAND_CTRL_LOAD))