Merge git://git.infradead.org/mtd-2.6

* git://git.infradead.org/mtd-2.6: (49 commits)
  [MTD] [NAND] S3C2412 fix hw ecc
  [MTD] [NAND] Work around false compiler warning in CAFÉ driver
  [JFFS2] printk warning fixes
  [MTD] [MAPS] ichxrom warning fix
  [MTD] [MAPS] amd76xrom warning fix
  [MTD] [MAPS] esb2rom warning fixes
  [MTD] [MAPS] ck804xrom warning fix
  [MTD] [MAPS] netsc520 warning fix
  [MTD] [MAPS] sc520cdp warning fix
  [MTD] [ONENAND] onenand_base warning fix
  [MTD] [NAND] eXcite nand flash driver
  [MTD] Improve heuristic for detecting wrong-endian RedBoot partition table
  [MTD] Fix RedBoot partition parsing regression harder.
  [MTD] [NAND] S3C2410: Hardware ECC correction code
  [JFFS2] Use MTD_OOB_AUTO to automatically place cleanmarker on NAND
  [MTD] Clarify OOB-operation interface comments
  [MTD] remove unused ecctype,eccsize fields from struct mtd_info
  [MTD] [NOR] Intel: remove ugly PROGREGION macros
  [MTD] [NOR] STAA: use writesize instead off eccsize to represent ECC block
  [MTD] OneNAND: Invalidate bufferRAM after erase
  ...

25 files changed, 930 insertions, 280 deletions

diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
index f69184a..f334959 100644
--- a/drivers/mtd/chips/cfi_cmdset_0001.c
+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
@@ -397,9 +397,23 @@ struct mtd_info *cfi_cmdset_0001(struct map_info *map, int primary)
 	cfi_fixup(mtd, fixup_table);
 
 	for (i=0; i< cfi->numchips; i++) {
-		cfi->chips[i].word_write_time = 1<<cfi->cfiq->WordWriteTimeoutTyp;
-		cfi->chips[i].buffer_write_time = 1<<cfi->cfiq->BufWriteTimeoutTyp;
-		cfi->chips[i].erase_time = 1000<<cfi->cfiq->BlockEraseTimeoutTyp;
+		if (cfi->cfiq->WordWriteTimeoutTyp)
+			cfi->chips[i].word_write_time =
+				1<<cfi->cfiq->WordWriteTimeoutTyp;
+		else
+			cfi->chips[i].word_write_time = 50000;
+
+		if (cfi->cfiq->BufWriteTimeoutTyp)
+			cfi->chips[i].buffer_write_time =
+				1<<cfi->cfiq->BufWriteTimeoutTyp;
+		/* No default; if it isn't specified, we won't use it */
+
+		if (cfi->cfiq->BlockEraseTimeoutTyp)
+			cfi->chips[i].erase_time =
+				1000<<cfi->cfiq->BlockEraseTimeoutTyp;
+		else
+			cfi->chips[i].erase_time = 2000000;
+
 		cfi->chips[i].ref_point_counter = 0;
 		init_waitqueue_head(&(cfi->chips[i].wq));
 	}
@@ -546,13 +560,11 @@ static int cfi_intelext_partition_fixup(struct mtd_info *mtd,
 			struct cfi_intelext_programming_regioninfo *prinfo;
 			prinfo = (struct cfi_intelext_programming_regioninfo *)&extp->extra[offs];
 			mtd->writesize = cfi->interleave << prinfo->ProgRegShift;
-			MTD_PROGREGION_CTRLMODE_VALID(mtd) = cfi->interleave * prinfo->ControlValid;
-			MTD_PROGREGION_CTRLMODE_INVALID(mtd) = cfi->interleave * prinfo->ControlInvalid;
 			mtd->flags &= ~MTD_BIT_WRITEABLE;
 			printk(KERN_DEBUG "%s: program region size/ctrl_valid/ctrl_inval = %d/%d/%d\n",
 			       map->name, mtd->writesize,
-			       MTD_PROGREGION_CTRLMODE_VALID(mtd),
-			       MTD_PROGREGION_CTRLMODE_INVALID(mtd));
+			       cfi->interleave * prinfo->ControlValid,
+			       cfi->interleave * prinfo->ControlInvalid);
 		}
 
 		/*
diff --git a/drivers/mtd/chips/cfi_cmdset_0020.c b/drivers/mtd/chips/cfi_cmdset_0020.c
index d56849f..69d49e0 100644
--- a/drivers/mtd/chips/cfi_cmdset_0020.c
+++ b/drivers/mtd/chips/cfi_cmdset_0020.c
@@ -662,7 +662,7 @@ static int cfi_staa_write_buffers (struct mtd_info *mtd, loff_t to,
  * a small buffer for this.
  * XXX: If the buffer size is not a multiple of 2, this will break
  */
-#define ECCBUF_SIZE (mtd->eccsize)
+#define ECCBUF_SIZE (mtd->writesize)
 #define ECCBUF_DIV(x) ((x) & ~(ECCBUF_SIZE - 1))
 #define ECCBUF_MOD(x) ((x) &  (ECCBUF_SIZE - 1))
 static int
diff --git a/drivers/mtd/devices/doc2000.c b/drivers/mtd/devices/doc2000.c
index 603a795..8a0c4de 100644
--- a/drivers/mtd/devices/doc2000.c
+++ b/drivers/mtd/devices/doc2000.c
@@ -569,7 +569,6 @@ void DoC2k_init(struct mtd_info *mtd)
 
 	mtd->type = MTD_NANDFLASH;
 	mtd->flags = MTD_CAP_NANDFLASH;
-	mtd->ecctype = MTD_ECC_RS_DiskOnChip;
 	mtd->size = 0;
 	mtd->erasesize = 0;
 	mtd->writesize = 512;
diff --git a/drivers/mtd/devices/doc2001.c b/drivers/mtd/devices/doc2001.c
index fe71a12..6f368ae 100644
--- a/drivers/mtd/devices/doc2001.c
+++ b/drivers/mtd/devices/doc2001.c
@@ -348,7 +348,6 @@ void DoCMil_init(struct mtd_info *mtd)
 
 	mtd->type = MTD_NANDFLASH;
 	mtd->flags = MTD_CAP_NANDFLASH;
-	mtd->ecctype = MTD_ECC_RS_DiskOnChip;
 	mtd->size = 0;
 
 	/* FIXME: erase size is not always 8KiB */
diff --git a/drivers/mtd/devices/doc2001plus.c b/drivers/mtd/devices/doc2001plus.c
index ba4db68..88ba82d 100644
--- a/drivers/mtd/devices/doc2001plus.c
+++ b/drivers/mtd/devices/doc2001plus.c
@@ -472,7 +472,6 @@ void DoCMilPlus_init(struct mtd_info *mtd)
 
 	mtd->type = MTD_NANDFLASH;
 	mtd->flags = MTD_CAP_NANDFLASH;
-	mtd->ecctype = MTD_ECC_RS_DiskOnChip;
 	mtd->size = 0;
 
 	mtd->erasesize = 0;
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index f457315..bbf0553 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -204,7 +204,7 @@ config MTD_ESB2ROM
 
 config MTD_CK804XROM
 	tristate "BIOS flash chip on Nvidia CK804"
-	depends on X86 && MTD_JEDECPROBE
+	depends on X86 && MTD_JEDECPROBE && PCI
 	help
 	  Support for treating the BIOS flash chip on nvidia motherboards
 	  as an MTD device - with this you can reprogram your BIOS.
diff --git a/drivers/mtd/maps/amd76xrom.c b/drivers/mtd/maps/amd76xrom.c
index 78b6711..728aed6 100644
--- a/drivers/mtd/maps/amd76xrom.c
+++ b/drivers/mtd/maps/amd76xrom.c
@@ -205,8 +205,8 @@ static int __devinit amd76xrom_init_one (struct pci_dev *pdev,
 			(((unsigned long)(window->virt)) + offset);
 		map->map.size = 0xffffffffUL - map_top + 1UL;
 		/* Set the name of the map to the address I am trying */
-		sprintf(map->map_name, "%s @%08lx",
-			MOD_NAME, map->map.phys);
+		sprintf(map->map_name, "%s @%08Lx",
+			MOD_NAME, (unsigned long long)map->map.phys);
 
 		/* There is no generic VPP support */
 		for(map->map.bankwidth = 32; map->map.bankwidth;
diff --git a/drivers/mtd/maps/ck804xrom.c b/drivers/mtd/maps/ck804xrom.c
index 238d42e..3d4a4d8 100644
--- a/drivers/mtd/maps/ck804xrom.c
+++ b/drivers/mtd/maps/ck804xrom.c
@@ -207,8 +207,8 @@ static int __devinit ck804xrom_init_one (struct pci_dev *pdev,
 			(((unsigned long)(window->virt)) + offset);
 		map->map.size = 0xffffffffUL - map_top + 1UL;
 		/* Set the name of the map to the address I am trying */
-		sprintf(map->map_name, "%s @%08lx",
-			MOD_NAME, map->map.phys);
+		sprintf(map->map_name, "%s @%08Lx",
+			MOD_NAME, (unsigned long long)map->map.phys);
 
 		/* There is no generic VPP support */
 		for(map->map.bankwidth = 32; map->map.bankwidth;
@@ -327,7 +327,7 @@ static int __init init_ck804xrom(void)
 	pdev = NULL;
 
 	for(id = ck804xrom_pci_tbl; id->vendor; id++) {
-		pdev = pci_find_device(id->vendor, id->device, NULL);
+		pdev = pci_get_device(id->vendor, id->device, NULL);
 		if (pdev)
 			break;
 	}
diff --git a/drivers/mtd/maps/esb2rom.c b/drivers/mtd/maps/esb2rom.c
index a9d808a..0bc013f 100644
--- a/drivers/mtd/maps/esb2rom.c
+++ b/drivers/mtd/maps/esb2rom.c
@@ -289,8 +289,8 @@ static int __devinit esb2rom_init_one(struct pci_dev *pdev,
 			(((unsigned long)(window->virt)) + offset);
 		map->map.size = 0xffffffffUL - map_top + 1UL;
 		/* Set the name of the map to the address I am trying */
-		sprintf(map->map_name, "%s @%08lx",
-			MOD_NAME, map->map.phys);
+		sprintf(map->map_name, "%s @%08Lx",
+			MOD_NAME, (unsigned long long)map->map.phys);
 
 		/* Firmware hubs only use vpp when being programmed
 		 * in a factory setting.  So in-place programming
diff --git a/drivers/mtd/maps/ichxrom.c b/drivers/mtd/maps/ichxrom.c
index 2bb3e636..2c884c4 100644
--- a/drivers/mtd/maps/ichxrom.c
+++ b/drivers/mtd/maps/ichxrom.c
@@ -227,8 +227,8 @@ static int __devinit ichxrom_init_one (struct pci_dev *pdev,
 			(((unsigned long)(window->virt)) + offset);
 		map->map.size = 0xffffffffUL - map_top + 1UL;
 		/* Set the name of the map to the address I am trying */
-		sprintf(map->map_name, "%s @%08lx",
-			MOD_NAME, map->map.phys);
+		sprintf(map->map_name, "%s @%08Lx",
+			MOD_NAME, (unsigned long long)map->map.phys);
 
 		/* Firmware hubs only use vpp when being programmed
 		 * in a factory setting.  So in-place programming
diff --git a/drivers/mtd/maps/netsc520.c b/drivers/mtd/maps/netsc520.c
index ed21547..95dcab2 100644
--- a/drivers/mtd/maps/netsc520.c
+++ b/drivers/mtd/maps/netsc520.c
@@ -94,7 +94,9 @@ static struct mtd_info *mymtd;
 
 static int __init init_netsc520(void)
 {
-	printk(KERN_NOTICE "NetSc520 flash device: 0x%lx at 0x%lx\n", netsc520_map.size, netsc520_map.phys);
+	printk(KERN_NOTICE "NetSc520 flash device: 0x%Lx at 0x%Lx\n",
+			(unsigned long long)netsc520_map.size,
+			(unsigned long long)netsc520_map.phys);
 	netsc520_map.virt = ioremap_nocache(netsc520_map.phys, netsc520_map.size);
 
 	if (!netsc520_map.virt) {
diff --git a/drivers/mtd/maps/sc520cdp.c b/drivers/mtd/maps/sc520cdp.c
index 9b50cfc..4045e37 100644
--- a/drivers/mtd/maps/sc520cdp.c
+++ b/drivers/mtd/maps/sc520cdp.c
@@ -237,8 +237,9 @@ static int __init init_sc520cdp(void)
 #endif
 
 	for (i = 0; i < NUM_FLASH_BANKS; i++) {
-		printk(KERN_NOTICE "SC520 CDP flash device: 0x%lx at 0x%lx\n",
-		       sc520cdp_map[i].size, sc520cdp_map[i].phys);
+		printk(KERN_NOTICE "SC520 CDP flash device: 0x%Lx at 0x%Lx\n",
+			(unsigned long long)sc520cdp_map[i].size,
+			(unsigned long long)sc520cdp_map[i].phys);
 
 		sc520cdp_map[i].virt = ioremap_nocache(sc520cdp_map[i].phys, sc520cdp_map[i].size);
 
diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c
index 61a994e..1592eac 100644
--- a/drivers/mtd/mtdchar.c
+++ b/drivers/mtd/mtdchar.c
@@ -419,8 +419,9 @@ static int mtd_ioctl(struct inode *inode, struct file *file,
 		info.erasesize	= mtd->erasesize;
 		info.writesize	= mtd->writesize;
 		info.oobsize	= mtd->oobsize;
-		info.ecctype	= mtd->ecctype;
-		info.eccsize	= mtd->eccsize;
+		/* The below fields are obsolete */
+		info.ecctype	= -1;
+		info.eccsize	= 0;
 		if (copy_to_user(argp, &info, sizeof(struct mtd_info_user)))
 			return -EFAULT;
 		break;
diff --git a/drivers/mtd/mtdconcat.c b/drivers/mtd/mtdconcat.c
index 0690268..880580c 100644
--- a/drivers/mtd/mtdconcat.c
+++ b/drivers/mtd/mtdconcat.c
@@ -727,8 +727,6 @@ struct mtd_info *mtd_concat_create(struct mtd_info *subdev[],	/* subdevices to c
 	concat->mtd.erasesize = subdev[0]->erasesize;
 	concat->mtd.writesize = subdev[0]->writesize;
 	concat->mtd.oobsize = subdev[0]->oobsize;
-	concat->mtd.ecctype = subdev[0]->ecctype;
-	concat->mtd.eccsize = subdev[0]->eccsize;
 	if (subdev[0]->writev)
 		concat->mtd.writev = concat_writev;
 	if (subdev[0]->read_oob)
@@ -774,8 +772,6 @@ struct mtd_info *mtd_concat_create(struct mtd_info *subdev[],	/* subdevices to c
 		if (concat->mtd.writesize   !=  subdev[i]->writesize ||
 		    concat->mtd.subpage_sft != subdev[i]->subpage_sft ||
 		    concat->mtd.oobsize    !=  subdev[i]->oobsize ||
-		    concat->mtd.ecctype    !=  subdev[i]->ecctype ||
-		    concat->mtd.eccsize    !=  subdev[i]->eccsize ||
 		    !concat->mtd.read_oob  != !subdev[i]->read_oob ||
 		    !concat->mtd.write_oob != !subdev[i]->write_oob) {
 			kfree(concat);
diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index bafd2fb..633def3 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -338,8 +338,6 @@ int add_mtd_partitions(struct mtd_info *master,
 		slave->mtd.size = parts[i].size;
 		slave->mtd.writesize = master->writesize;
 		slave->mtd.oobsize = master->oobsize;
-		slave->mtd.ecctype = master->ecctype;
-		slave->mtd.eccsize = master->eccsize;
 		slave->mtd.subpage_sft = master->subpage_sft;
 
 		slave->mtd.name = parts[i].name;
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 358f55a..2d12dcd 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -126,10 +126,6 @@ config MTD_NAND_S3C2410_HWECC
 	  incorrect ECC generation, and if using these, the default of
 	  software ECC is preferable.
 
-	  If you lay down a device with the hardware ECC, then you will
-	  currently not be able to switch to software, as there is no
-	  implementation for ECC method used by the S3C2410
-
 config MTD_NAND_NDFC
 	tristate "NDFC NanD Flash Controller"
 	depends on MTD_NAND && 44x
@@ -221,9 +217,17 @@ config MTD_NAND_SHARPSL
 	tristate "Support for NAND Flash on Sharp SL Series (C7xx + others)"
 	depends on MTD_NAND && ARCH_PXA
 
+config MTD_NAND_BASLER_EXCITE
+	tristate  "Support for NAND Flash on Basler eXcite"
+	depends on MTD_NAND && BASLER_EXCITE
+	help
+          This enables the driver for the NAND flash device found on the
+          Basler eXcite Smart Camera. If built as a module, the driver
+          will be named "excite_nandflash.ko".
+
 config MTD_NAND_CAFE
        tristate "NAND support for OLPC CAFÉ chip"
-       depends on PCI
+       depends on MTD_NAND && PCI
        help
 	 Use NAND flash attached to the CAFÉ chip designed for the $100
 	 laptop.
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index f7a53f0..80f1dfc 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -24,6 +24,7 @@ obj-$(CONFIG_MTD_NAND_NANDSIM)		+= nandsim.o
 obj-$(CONFIG_MTD_NAND_CS553X)		+= cs553x_nand.o
 obj-$(CONFIG_MTD_NAND_NDFC)		+= ndfc.o
 obj-$(CONFIG_MTD_NAND_AT91)		+= at91_nand.o
+obj-$(CONFIG_MTD_NAND_BASLER_EXCITE)	+= excite_nandflash.o
 
 nand-objs := nand_base.o nand_bbt.o
 cafe_nand-objs := cafe.o cafe_ecc.o
diff --git a/drivers/mtd/nand/cafe.c b/drivers/mtd/nand/cafe.c
index 08cb060..fd6bb3e 100644
--- a/drivers/mtd/nand/cafe.c
+++ b/drivers/mtd/nand/cafe.c
@@ -78,8 +78,9 @@ module_param(regdebug, int, 0644);
 static int checkecc = 1;
 module_param(checkecc, int, 0644);
 
-static int slowtiming = 0;
-module_param(slowtiming, int, 0644);
+static int numtimings;
+static int timing[3];
+module_param_array(timing, int, &numtimings, 0644);
 
 /* Hrm. Why isn't this already conditional on something in the struct device? */
 #define cafe_dev_dbg(dev, args...) do { if (debug) dev_dbg(dev, ##args); } while(0)
@@ -264,10 +265,10 @@ static void cafe_nand_cmdfunc(struct mtd_info *mtd, unsigned command,
 	ndelay(100);
 
 	if (1) {
-		int c = 500000;
+		int c;
 		uint32_t irqs;
 
-		while (c--) {
+		for (c = 500000; c != 0; c--) {
 			irqs = cafe_readl(cafe, NAND_IRQ);
 			if (irqs & doneint)
 				break;
@@ -529,6 +530,7 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev,
 {
 	struct mtd_info *mtd;
 	struct cafe_priv *cafe;
+	uint32_t timing1, timing2, timing3;
 	uint32_t ctrl;
 	int err = 0;
 
@@ -580,31 +582,45 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev,
 		cafe->nand.block_bad = cafe_nand_block_bad;
 	}
 
+	if (numtimings && numtimings != 3) {
+		dev_warn(&cafe->pdev->dev, "%d timing register values ignored; precisely three are required\n", numtimings);
+	}
+
+	if (numtimings == 3) {
+		timing1 = timing[0];
+		timing2 = timing[1];
+		timing3 = timing[2];
+		cafe_dev_dbg(&cafe->pdev->dev, "Using provided timings (%08x %08x %08x)\n",
+			     timing1, timing2, timing3);
+	} else {
+		timing1 = cafe_readl(cafe, NAND_TIMING1);
+		timing2 = cafe_readl(cafe, NAND_TIMING2);
+		timing3 = cafe_readl(cafe, NAND_TIMING3);
+
+		if (timing1 | timing2 | timing3) {
+			cafe_dev_dbg(&cafe->pdev->dev, "Timing registers already set (%08x %08x %08x)\n", timing1, timing2, timing3);
+		} else {
+			dev_warn(&cafe->pdev->dev, "Timing registers unset; using most conservative defaults\n");
+			timing1 = timing2 = timing3 = 0xffffffff;
+		}
+	}
+
 	/* Start off by resetting the NAND controller completely */
 	cafe_writel(cafe, 1, NAND_RESET);
 	cafe_writel(cafe, 0, NAND_RESET);
 
-	cafe_writel(cafe, 0xffffffff, NAND_IRQ_MASK);
+	cafe_writel(cafe, timing1, NAND_TIMING1);
+	cafe_writel(cafe, timing2, NAND_TIMING2);
+	cafe_writel(cafe, timing3, NAND_TIMING3);
 
-	/* Timings from Marvell's test code (not verified or calculated by us) */
-	if (!slowtiming) {
-		cafe_writel(cafe, 0x01010a0a, NAND_TIMING1);
-		cafe_writel(cafe, 0x24121212, NAND_TIMING2);
-		cafe_writel(cafe, 0x11000000, NAND_TIMING3);
-	} else {
-		cafe_writel(cafe, 0xffffffff, NAND_TIMING1);
-		cafe_writel(cafe, 0xffffffff, NAND_TIMING2);
-		cafe_writel(cafe, 0xffffffff, NAND_TIMING3);
-	}
 	cafe_writel(cafe, 0xffffffff, NAND_IRQ_MASK);
 	err = request_irq(pdev->irq, &cafe_nand_interrupt, IRQF_SHARED,
 			  "CAFE NAND", mtd);
 	if (err) {
 		dev_warn(&pdev->dev, "Could not register IRQ %d\n", pdev->irq);
-
 		goto out_free_dma;
 	}
-#if 1
+
 	/* Disable master reset, enable NAND clock */
 	ctrl = cafe_readl(cafe, GLOBAL_CTRL);
 	ctrl &= 0xffffeff0;
@@ -631,32 +647,8 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev,
 	cafe_writel(cafe, 0x80000007, GLOBAL_IRQ_MASK);
 	cafe_dev_dbg(&cafe->pdev->dev, "Control %x, IRQ mask %x\n",
 		cafe_readl(cafe, GLOBAL_CTRL), cafe_readl(cafe, GLOBAL_IRQ_MASK));
-#endif
-#if 1
-	mtd->writesize=2048;
-	mtd->oobsize = 0x40;
-	memset(cafe->dmabuf, 0x5a, 2112);
-	cafe->nand.cmdfunc(mtd, NAND_CMD_READID, 0, -1);
-	cafe->nand.read_byte(mtd);
-	cafe->nand.read_byte(mtd);
-	cafe->nand.read_byte(mtd);
-	cafe->nand.read_byte(mtd);
-	cafe->nand.read_byte(mtd);
-#endif
-#if 0
-	cafe->nand.cmdfunc(mtd, NAND_CMD_READ0, 0, 0);
-	//	nand_wait_ready(mtd);
-	cafe->nand.read_byte(mtd);
-	cafe->nand.read_byte(mtd);
-	cafe->nand.read_byte(mtd);
-	cafe->nand.read_byte(mtd);
-#endif
-#if 0
-	writel(0x84600070, cafe->mmio);
-	udelay(10);
-	cafe_dev_dbg(&cafe->pdev->dev, "Status %x\n", cafe_readl(cafe, NAND_NONMEM));
-#endif
-	/* Scan to find existance of the device */
+
+	/* Scan to find existence of the device */
 	if (nand_scan_ident(mtd, 1)) {
 		err = -ENXIO;
 		goto out_irq;
@@ -760,13 +752,4 @@ module_exit(cafe_nand_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
-MODULE_DESCRIPTION("NAND flash driver for OLPC CAFE chip");
-
-/* Correct ECC for 2048 bytes of 0xff:
-   41 a0 71 65 54 27 f3 93 ec a9 be ed 0b a1 */
-
-/* dwmw2's B-test board, in case of completely screwing it:
-Bad eraseblock 2394 at 0x12b40000
-Bad eraseblock 2627 at 0x14860000
-Bad eraseblock 3349 at 0x1a2a0000
-*/
+MODULE_DESCRIPTION("NAND flash driver for OLPC CAFÉ chip");
diff --git a/drivers/mtd/nand/cafe_ecc.c b/drivers/mtd/nand/cafe_ecc.c
index 1b9fa05..ea5c849 100644
--- a/drivers/mtd/nand/cafe_ecc.c
+++ b/drivers/mtd/nand/cafe_ecc.c
@@ -1045,7 +1045,7 @@ static unsigned short err_pos_lut[4096] = {
 
 static unsigned short err_pos(unsigned short din)
 {
-	BUG_ON(din > 4096);
+	BUG_ON(din >= ARRAY_SIZE(err_pos_lut));
 	return err_pos_lut[din];
 }
 static int chk_no_err_only(unsigned short *chk_syndrome_list, unsigned short *err_info)
diff --git a/drivers/mtd/nand/excite_nandflash.c b/drivers/mtd/nand/excite_nandflash.c
new file mode 100644
index 0000000..7e9afc4
--- /dev/null
+++ b/drivers/mtd/nand/excite_nandflash.c
@@ -0,0 +1,248 @@
+/*
+*  Copyright (C) 2005 - 2007 by Basler Vision Technologies AG
+*  Author: Thomas Koeller <thomas.koeller.qbaslerweb.com>
+*  Original code by Thies Moeller <thies.moeller@baslerweb.com>
+*
+*  This program is free software; you can redistribute it and/or modify
+*  it under the terms of the GNU General Public License as published by
+*  the Free Software Foundation; either version 2 of the License, or
+*  (at your option) any later version.
+*
+*  This program is distributed in the hope that it will be useful,
+*  but WITHOUT ANY WARRANTY; without even the implied warranty of
+*  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+*  GNU General Public License for more details.
+*
+*  You should have received a copy of the GNU General Public License
+*  along with this program; if not, write to the Free Software
+*  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/io.h>
+#include <asm/rm9k-ocd.h>
+
+#include <excite_nandflash.h>
+
+#define EXCITE_NANDFLASH_VERSION "0.1"
+
+/* I/O register offsets */
+#define EXCITE_NANDFLASH_DATA_BYTE   0x00
+#define EXCITE_NANDFLASH_STATUS_BYTE 0x0c
+#define EXCITE_NANDFLASH_ADDR_BYTE   0x10
+#define EXCITE_NANDFLASH_CMD_BYTE    0x14
+
+/* prefix for debug output */
+static const char module_id[] = "excite_nandflash";
+
+/*
+ * partition definition
+ */
+static const struct mtd_partition partition_info[] = {
+	{
+		.name = "eXcite RootFS",
+		.offset = 0,
+		.size = MTDPART_SIZ_FULL
+	}
+};
+
+static inline const struct resource *
+excite_nand_get_resource(struct platform_device *d, unsigned long flags,
+			 const char *basename)
+{
+	char buf[80];
+
+	if (snprintf(buf, sizeof buf, "%s_%u", basename, d->id) >= sizeof buf)
+		return NULL;
+	return platform_get_resource_byname(d, flags, buf);
+}
+
+static inline void __iomem *
+excite_nand_map_regs(struct platform_device *d, const char *basename)
+{
+	void *result = NULL;
+	const struct resource *const r =
+	    excite_nand_get_resource(d, IORESOURCE_MEM, basename);
+
+	if (r)
+		result = ioremap_nocache(r->start, r->end + 1 - r->start);
+	return result;
+}
+
+/* controller and mtd information */
+struct excite_nand_drvdata {
+	struct mtd_info board_mtd;
+	struct nand_chip board_chip;
+	void __iomem *regs;
+	void __iomem *tgt;
+};
+
+/* Control function */
+static void excite_nand_control(struct mtd_info *mtd, int cmd,
+				       unsigned int ctrl)
+{
+	struct excite_nand_drvdata * const d =
+	    container_of(mtd, struct excite_nand_drvdata, board_mtd);
+
+	switch (ctrl) {
+	case NAND_CTRL_CHANGE | NAND_CTRL_CLE:
+		d->tgt = d->regs + EXCITE_NANDFLASH_CMD_BYTE;
+		break;
+	case NAND_CTRL_CHANGE | NAND_CTRL_ALE:
+		d->tgt = d->regs + EXCITE_NANDFLASH_ADDR_BYTE;
+		break;
+	case NAND_CTRL_CHANGE | NAND_NCE:
+		d->tgt = d->regs + EXCITE_NANDFLASH_DATA_BYTE;
+		break;
+	}
+
+	if (cmd != NAND_CMD_NONE)
+		__raw_writeb(cmd, d->tgt);
+}
+
+/* Return 0 if flash is busy, 1 if ready */
+static int excite_nand_devready(struct mtd_info *mtd)
+{
+	struct excite_nand_drvdata * const drvdata =
+	    container_of(mtd, struct excite_nand_drvdata, board_mtd);
+
+	return __raw_readb(drvdata->regs + EXCITE_NANDFLASH_STATUS_BYTE);
+}
+
+/*
+ * Called by device layer to remove the driver.
+ * The binding to the mtd and all allocated
+ * resources are released.
+ */
+static int __exit excite_nand_remove(struct device *dev)
+{
+	struct excite_nand_drvdata * const this = dev_get_drvdata(dev);
+
+	dev_set_drvdata(dev, NULL);
+
+	if (unlikely(!this)) {
+		printk(KERN_ERR "%s: called %s without private data!!",
+		       module_id, __func__);
+		return -EINVAL;
+	}
+
+	/* first thing we need to do is release our mtd
+	 * then go through freeing the resource used
+	 */
+	nand_release(&this->board_mtd);
+
+	/* free the common resources */
+	iounmap(this->regs);
+	kfree(this);
+
+	DEBUG(MTD_DEBUG_LEVEL1, "%s: removed\n", module_id);
+	return 0;
+}
+
+/*
+ * Called by device layer when it finds a device matching
+ * one our driver can handle. This code checks to see if
+ * it can allocate all necessary resources then calls the
+ * nand layer to look for devices.
+*/
+static int __init excite_nand_probe(struct device *dev)
+{
+	struct platform_device * const pdev = to_platform_device(dev);
+	struct excite_nand_drvdata *drvdata;	/* private driver data */
+	struct nand_chip *board_chip;	/* private flash chip data */
+	struct mtd_info *board_mtd;	/* mtd info for this board */
+	int scan_res;
+
+	drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL);
+	if (unlikely(!drvdata)) {
+		printk(KERN_ERR "%s: no memory for drvdata\n",
+		       module_id);
+		return -ENOMEM;
+	}
+
+	/* bind private data into driver */
+	dev_set_drvdata(dev, drvdata);
+
+	/* allocate and map the resource */
+	drvdata->regs =
+		excite_nand_map_regs(pdev, EXCITE_NANDFLASH_RESOURCE_REGS);
+
+	if (unlikely(!drvdata->regs)) {
+		printk(KERN_ERR "%s: cannot reserve register region\n",
+		       module_id);
+		kfree(drvdata);
+		return -ENXIO;
+	}
+	
+	drvdata->tgt = drvdata->regs + EXCITE_NANDFLASH_DATA_BYTE;
+
+	/* initialise our chip */
+	board_chip = &drvdata->board_chip;
+	board_chip->IO_ADDR_R = board_chip->IO_ADDR_W =
+		drvdata->regs + EXCITE_NANDFLASH_DATA_BYTE;
+	board_chip->cmd_ctrl = excite_nand_control;
+	board_chip->dev_ready = excite_nand_devready;
+	board_chip->chip_delay = 25;
+	board_chip->ecc.mode = NAND_ECC_SOFT;
+
+	/* link chip to mtd */
+	board_mtd = &drvdata->board_mtd;
+	board_mtd->priv = board_chip;
+
+	DEBUG(MTD_DEBUG_LEVEL2, "%s: device scan\n", module_id);
+	scan_res = nand_scan(&drvdata->board_mtd, 1);
+
+	if (likely(!scan_res)) {
+		DEBUG(MTD_DEBUG_LEVEL2, "%s: register partitions\n", module_id);
+		add_mtd_partitions(&drvdata->board_mtd, partition_info,
+				   sizeof partition_info / sizeof partition_info[0]);
+	} else {
+		iounmap(drvdata->regs);
+		kfree(drvdata);
+		printk(KERN_ERR "%s: device scan failed\n", module_id);
+		return -EIO;
+	}
+	return 0;
+}
+
+static struct device_driver excite_nand_driver = {
+	.name = "excite_nand",
+	.bus = &platform_bus_type,
+	.probe = excite_nand_probe,
+	.remove = __exit_p(excite_nand_remove)
+};
+
+static int __init excite_nand_init(void)
+{
+	pr_info("Basler eXcite nand flash driver Version "
+		EXCITE_NANDFLASH_VERSION "\n");
+	return driver_register(&excite_nand_driver);
+}
+
+static void __exit excite_nand_exit(void)
+{
+	driver_unregister(&excite_nand_driver);
+}
+
+module_init(excite_nand_init);
+module_exit(excite_nand_exit);
+
+MODULE_AUTHOR("Thomas Koeller <thomas.koeller@baslerweb.com>");
+MODULE_DESCRIPTION("Basler eXcite NAND-Flash driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(EXCITE_NANDFLASH_VERSION)
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index dfe56e0..acaf97b 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -1272,10 +1272,25 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
 	DEBUG(MTD_DEBUG_LEVEL3, "nand_read_oob: from = 0x%08Lx, len = %i\n",
 	      (unsigned long long)from, readlen);
 
-	if (ops->mode == MTD_OOB_RAW)
-		len = mtd->oobsize;
-	else
+	if (ops->mode == MTD_OOB_AUTO)
 		len = chip->ecc.layout->oobavail;
+	else
+		len = mtd->oobsize;
+
+	if (unlikely(ops->ooboffs >= len)) {
+		DEBUG(MTD_DEBUG_LEVEL0, "nand_read_oob: "
+			"Attempt to start read outside oob\n");
+		return -EINVAL;
+	}
+
+	/* Do not allow reads past end of device */
+	if (unlikely(from >= mtd->size ||
+		     ops->ooboffs + readlen > ((mtd->size >> chip->page_shift) -
+					(from >> chip->page_shift)) * len)) {
+		DEBUG(MTD_DEBUG_LEVEL0, "nand_read_oob: "
+			"Attempt read beyond end of device\n");
+		return -EINVAL;
+	}
 
 	chipnr = (int)(from >> chip->chip_shift);
 	chip->select_chip(mtd, chipnr);
@@ -1742,19 +1757,40 @@ static int nand_write(struct mtd_info *mtd, loff_t to, size_t len,
 static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
 			     struct mtd_oob_ops *ops)
 {
-	int chipnr, page, status;
+	int chipnr, page, status, len;
 	struct nand_chip *chip = mtd->priv;
 
 	DEBUG(MTD_DEBUG_LEVEL3, "nand_write_oob: to = 0x%08x, len = %i\n",
 	      (unsigned int)to, (int)ops->ooblen);
 
+	if (ops->mode == MTD_OOB_AUTO)
+		len = chip->ecc.layout->oobavail;
+	else
+		len = mtd->oobsize;
+
 	/* Do not allow write past end of page */
-	if ((ops->ooboffs + ops->ooblen) > mtd->oobsize) {
+	if ((ops->ooboffs + ops->ooblen) > len) {
 		DEBUG(MTD_DEBUG_LEVEL0, "nand_write_oob: "
 		      "Attempt to write past end of page\n");
 		return -EINVAL;
 	}
 
+	if (unlikely(ops->ooboffs >= len)) {
+		DEBUG(MTD_DEBUG_LEVEL0, "nand_read_oob: "
+			"Attempt to start write outside oob\n");
+		return -EINVAL;
+	}
+
+	/* Do not allow reads past end of device */
+	if (unlikely(to >= mtd->size ||
+		     ops->ooboffs + ops->ooblen >
+			((mtd->size >> chip->page_shift) -
+			 (to >> chip->page_shift)) * len)) {
+		DEBUG(MTD_DEBUG_LEVEL0, "nand_read_oob: "
+			"Attempt write beyond end of device\n");
+		return -EINVAL;
+	}
+
 	chipnr = (int)(to >> chip->chip_shift);
 	chip->select_chip(mtd, chipnr);
 
@@ -2530,7 +2566,6 @@ int nand_scan_tail(struct mtd_info *mtd)
 	/* Fill in remaining MTD driver data */
 	mtd->type = MTD_NANDFLASH;
 	mtd->flags = MTD_CAP_NANDFLASH;
-	mtd->ecctype = MTD_ECC_SW;
 	mtd->erase = nand_erase;
 	mtd->point = NULL;
 	mtd->unpoint = NULL;
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index 8b32035..0ddfd6d 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -337,17 +337,69 @@ static int s3c2412_nand_devready(struct mtd_info *mtd)
 static int s3c2410_nand_correct_data(struct mtd_info *mtd, u_char *dat,
 				     u_char *read_ecc, u_char *calc_ecc)
 {
-	pr_debug("s3c2410_nand_correct_data(%p,%p,%p,%p)\n", mtd, dat, read_ecc, calc_ecc);
+	struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+	unsigned int diff0, diff1, diff2;
+	unsigned int bit, byte;
 
-	pr_debug("eccs: read %02x,%02x,%02x vs calc %02x,%02x,%02x\n",
-		 read_ecc[0], read_ecc[1], read_ecc[2], calc_ecc[0], calc_ecc[1], calc_ecc[2]);
+	pr_debug("%s(%p,%p,%p,%p)\n", __func__, mtd, dat, read_ecc, calc_ecc);
 
-	if (read_ecc[0] == calc_ecc[0] && read_ecc[1] == calc_ecc[1] && read_ecc[2] == calc_ecc[2])
-		return 0;
+	diff0 = read_ecc[0] ^ calc_ecc[0];
+	diff1 = read_ecc[1] ^ calc_ecc[1];
+	diff2 = read_ecc[2] ^ calc_ecc[2];
+
+	pr_debug("%s: rd %02x%02x%02x calc %02x%02x%02x diff %02x%02x%02x\n",
+		 __func__,
+		 read_ecc[0], read_ecc[1], read_ecc[2],
+		 calc_ecc[0], calc_ecc[1], calc_ecc[2],
+		 diff0, diff1, diff2);
+
+	if (diff0 == 0 && diff1 == 0 && diff2 == 0)
+		return 0;		/* ECC is ok */
+
+	/* Can we correct this ECC (ie, one row and column change).
+	 * Note, this is similar to the 256 error code on smartmedia */
+
+	if (((diff0 ^ (diff0 >> 1)) & 0x55) == 0x55 &&
+	    ((diff1 ^ (diff1 >> 1)) & 0x55) == 0x55 &&
+	    ((diff2 ^ (diff2 >> 1)) & 0x55) == 0x55) {
+		/* calculate the bit position of the error */
+
+		bit  = (diff2 >> 2) & 1;
+		bit |= (diff2 >> 3) & 2;
+		bit |= (diff2 >> 4) & 4;
+
+		/* calculate the byte position of the error */
+
+		byte  = (diff1 << 1) & 0x80;
+		byte |= (diff1 << 2) & 0x40;
+		byte |= (diff1 << 3) & 0x20;
+		byte |= (diff1 << 4) & 0x10;
+
+		byte |= (diff0 >> 3) & 0x08;
+		byte |= (diff0 >> 2) & 0x04;
+		byte |= (diff0 >> 1) & 0x02;
+		byte |= (diff0 >> 0) & 0x01;
 
-	/* we curently have no method for correcting the error */
+		byte |= (diff2 << 8) & 0x100;
 
-	return -1;
+		dev_dbg(info->device, "correcting error bit %d, byte %d\n",
+			bit, byte);
+
+		dat[byte] ^= (1 << bit);
+		return 1;
+	}
+
+	/* if there is only one bit difference in the ECC, then
+	 * one of only a row or column parity has changed, which
+	 * means the error is most probably in the ECC itself */
+
+	diff0 |= (diff1 << 8);
+	diff0 |= (diff2 << 16);
+
+	if ((diff0 & ~(1<<fls(diff0))) == 0)
+		return 1;
+
+	return 0;
 }
 
 /* ECC functions
@@ -366,6 +418,15 @@ static void s3c2410_nand_enable_hwecc(struct mtd_info *mtd, int mode)
 	writel(ctrl, info->regs + S3C2410_NFCONF);
 }
 
+static void s3c2412_nand_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+	struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+	unsigned long ctrl;
+
+	ctrl = readl(info->regs + S3C2440_NFCONT);
+	writel(ctrl | S3C2412_NFCONT_INIT_MAIN_ECC, info->regs + S3C2440_NFCONT);
+}
+
 static void s3c2440_nand_enable_hwecc(struct mtd_info *mtd, int mode)
 {
 	struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
@@ -383,6 +444,21 @@ static int s3c2410_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u
 	ecc_code[1] = readb(info->regs + S3C2410_NFECC + 1);
 	ecc_code[2] = readb(info->regs + S3C2410_NFECC + 2);
 
+	pr_debug("%s: returning ecc %02x%02x%02x\n", __func__,
+		 ecc_code[0], ecc_code[1], ecc_code[2]);
+
+	return 0;
+}
+
+static int s3c2412_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code)
+{
+	struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+	unsigned long ecc = readl(info->regs + S3C2412_NFMECC0);
+
+	ecc_code[0] = ecc;
+	ecc_code[1] = ecc >> 8;
+	ecc_code[2] = ecc >> 16;
+
 	pr_debug("calculate_ecc: returning ecc %02x,%02x,%02x\n", ecc_code[0], ecc_code[1], ecc_code[2]);
 
 	return 0;
@@ -397,7 +473,7 @@ static int s3c2440_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u
 	ecc_code[1] = ecc >> 8;
 	ecc_code[2] = ecc >> 16;
 
-	pr_debug("calculate_ecc: returning ecc %02x,%02x,%02x\n", ecc_code[0], ecc_code[1], ecc_code[2]);
+	pr_debug("%s: returning ecc %06x\n", __func__, ecc);
 
 	return 0;
 }
@@ -565,6 +641,10 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
 			break;
 
 		case TYPE_S3C2412:
+  			chip->ecc.hwctl     = s3c2412_nand_enable_hwecc;
+  			chip->ecc.calculate = s3c2412_nand_calculate_ecc;
+			break;
+
 		case TYPE_S3C2440:
   			chip->ecc.hwctl     = s3c2440_nand_enable_hwecc;
   			chip->ecc.calculate = s3c2440_nand_calculate_ecc;
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index 2da6bb2..7f1cb6e 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -1,7 +1,7 @@
 /*
  *  linux/drivers/mtd/onenand/onenand_base.c
  *
- *  Copyright (C) 2005-2006 Samsung Electronics
+ *  Copyright (C) 2005-2007 Samsung Electronics
  *  Kyungmin Park <kyungmin.park@samsung.com>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -94,16 +94,9 @@ static void onenand_writew(unsigned short value, void __iomem *addr)
  */
 static int onenand_block_address(struct onenand_chip *this, int block)
 {
-	if (this->device_id & ONENAND_DEVICE_IS_DDP) {
-		/* Device Flash Core select, NAND Flash Block Address */
-		int dfs = 0;
-
-		if (block & this->density_mask)
-			dfs = 1;
-
-		return (dfs << ONENAND_DDP_SHIFT) |
-			(block & (this->density_mask - 1));
-	}
+	/* Device Flash Core select, NAND Flash Block Address */
+	if (block & this->density_mask)
+		return ONENAND_DDP_CHIP1 | (block ^ this->density_mask);
 
 	return block;
 }
@@ -118,17 +111,11 @@ static int onenand_block_address(struct onenand_chip *this, int block)
  */
 static int onenand_bufferram_address(struct onenand_chip *this, int block)
 {
-	if (this->device_id & ONENAND_DEVICE_IS_DDP) {
-		/* Device BufferRAM Select */
-		int dbs = 0;
-
-		if (block & this->density_mask)
-			dbs = 1;
+	/* Device BufferRAM Select */
+	if (block & this->density_mask)
+		return ONENAND_DDP_CHIP1;
 
-		return (dbs << ONENAND_DDP_SHIFT);
-	}
-
-	return 0;
+	return ONENAND_DDP_CHIP0;
 }
 
 /**
@@ -317,22 +304,25 @@ static int onenand_wait(struct mtd_info *mtd, int state)
 	ctrl = this->read_word(this->base + ONENAND_REG_CTRL_STATUS);
 
 	if (ctrl & ONENAND_CTRL_ERROR) {
-		DEBUG(MTD_DEBUG_LEVEL0, "onenand_wait: controller error = 0x%04x\n", ctrl);
+		printk(KERN_ERR "onenand_wait: controller error = 0x%04x\n", ctrl);
 		if (ctrl & ONENAND_CTRL_LOCK)
-			DEBUG(MTD_DEBUG_LEVEL0, "onenand_wait: it's locked error.\n");
+			printk(KERN_ERR "onenand_wait: it's locked error.\n");
 		return ctrl;
 	}
 
 	if (interrupt & ONENAND_INT_READ) {
 		int ecc = this->read_word(this->base + ONENAND_REG_ECC_STATUS);
 		if (ecc) {
-			DEBUG(MTD_DEBUG_LEVEL0, "onenand_wait: ECC error = 0x%04x\n", ecc);
+			printk(KERN_ERR "onenand_wait: ECC error = 0x%04x\n", ecc);
 			if (ecc & ONENAND_ECC_2BIT_ALL) {
 				mtd->ecc_stats.failed++;
 				return ecc;
 			} else if (ecc & ONENAND_ECC_1BIT_ALL)
 				mtd->ecc_stats.corrected++;
 		}
+	} else if (state == FL_READING) {
+		printk(KERN_ERR "onenand_wait: read timeout! ctrl=0x%04x intr=0x%04x\n", ctrl, interrupt);
+		return -EIO;
 	}
 
 	return 0;
@@ -587,22 +577,32 @@ static int onenand_write_bufferram(struct mtd_info *mtd, int area,
 static int onenand_check_bufferram(struct mtd_info *mtd, loff_t addr)
 {
 	struct onenand_chip *this = mtd->priv;
-	int block, page;
-	int i;
+	int blockpage, found = 0;
+	unsigned int i;
 
-	block = (int) (addr >> this->erase_shift);
-	page = (int) (addr >> this->page_shift);
-	page &= this->page_mask;
+	blockpage = (int) (addr >> this->page_shift);
 
+	/* Is there valid data? */
 	i = ONENAND_CURRENT_BUFFERRAM(this);
+	if (this->bufferram[i].blockpage == blockpage)
+		found = 1;
+	else {
+		/* Check another BufferRAM */
+		i = ONENAND_NEXT_BUFFERRAM(this);
+		if (this->bufferram[i].blockpage == blockpage) {
+			ONENAND_SET_NEXT_BUFFERRAM(this);
+			found = 1;
+		}
+	}
 
-	/* Is there valid data? */
-	if (this->bufferram[i].block == block &&
-	    this->bufferram[i].page == page &&
-	    this->bufferram[i].valid)
-		return 1;
+	if (found && ONENAND_IS_DDP(this)) {
+		/* Select DataRAM for DDP */
+		int block = (int) (addr >> this->erase_shift);
+		int value = onenand_bufferram_address(this, block);
+		this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2);
+	}
 
-	return 0;
+	return found;
 }
 
 /**
@@ -613,31 +613,49 @@ static int onenand_check_bufferram(struct mtd_info *mtd, loff_t addr)
  *
  * Update BufferRAM information
  */
-static int onenand_update_bufferram(struct mtd_info *mtd, loff_t addr,
+static void onenand_update_bufferram(struct mtd_info *mtd, loff_t addr,
 		int valid)
 {
 	struct onenand_chip *this = mtd->priv;
-	int block, page;
-	int i;
+	int blockpage;
+	unsigned int i;
 
-	block = (int) (addr >> this->erase_shift);
-	page = (int) (addr >> this->page_shift);
-	page &= this->page_mask;
+	blockpage = (int) (addr >> this->page_shift);
 
-	/* Invalidate BufferRAM */
-	for (i = 0; i < MAX_BUFFERRAM; i++) {
-		if (this->bufferram[i].block == block &&
-		    this->bufferram[i].page == page)
-			this->bufferram[i].valid = 0;
-	}
+	/* Invalidate another BufferRAM */
+	i = ONENAND_NEXT_BUFFERRAM(this);
+	if (this->bufferram[i].blockpage == blockpage)
+		this->bufferram[i].blockpage = -1;
 
 	/* Update BufferRAM */
 	i = ONENAND_CURRENT_BUFFERRAM(this);
-	this->bufferram[i].block = block;
-	this->bufferram[i].page = page;
-	this->bufferram[i].valid = valid;
+	if (valid)
+		this->bufferram[i].blockpage = blockpage;
+	else
+		this->bufferram[i].blockpage = -1;
+}
 
-	return 0;
+/**
+ * onenand_invalidate_bufferram - [GENERIC] Invalidate BufferRAM information
+ * @param mtd		MTD data structure
+ * @param addr		start address to invalidate
+ * @param len		length to invalidate
+ *
+ * Invalidate BufferRAM information
+ */
+static void onenand_invalidate_bufferram(struct mtd_info *mtd, loff_t addr,
+		unsigned int len)
+{
+	struct onenand_chip *this = mtd->priv;
+	int i;
+	loff_t end_addr = addr + len;
+
+	/* Invalidate BufferRAM */
+	for (i = 0; i < MAX_BUFFERRAM; i++) {
+		loff_t buf_addr = this->bufferram[i].blockpage << this->page_shift;
+		if (buf_addr >= addr && buf_addr < end_addr)
+			this->bufferram[i].blockpage = -1;
+	}
 }
 
 /**
@@ -716,7 +734,7 @@ static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len,
 
 	/* Do not allow reads past end of device */
 	if ((from + len) > mtd->size) {
-		DEBUG(MTD_DEBUG_LEVEL0, "onenand_read: Attempt read beyond end of device\n");
+		printk(KERN_ERR "onenand_read: Attempt read beyond end of device\n");
 		*retlen = 0;
 		return -EINVAL;
 	}
@@ -724,8 +742,6 @@ static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len,
 	/* Grab the lock and see if the device is available */
 	onenand_get_device(mtd, FL_READING);
 
-	/* TODO handling oob */
-
 	stats = mtd->ecc_stats;
 
  	/* Read-while-load method */
@@ -754,9 +770,9 @@ static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len,
  			 * Now we issued chip 1 read and pointed chip 1
  			 * bufferam so we have to point chip 0 bufferam.
  			 */
- 			if (this->device_id & ONENAND_DEVICE_IS_DDP &&
- 					unlikely(from == (this->chipsize >> 1))) {
- 				this->write_word(0, this->base + ONENAND_REG_START_ADDRESS2);
+ 			if (ONENAND_IS_DDP(this) &&
+ 			    unlikely(from == (this->chipsize >> 1))) {
+ 				this->write_word(ONENAND_DDP_CHIP0, this->base + ONENAND_REG_START_ADDRESS2);
  				boundary = 1;
  			} else
  				boundary = 0;
@@ -770,7 +786,7 @@ static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len,
  			break;
  		/* Set up for next read from bufferRAM */
  		if (unlikely(boundary))
- 			this->write_word(0x8000, this->base + ONENAND_REG_START_ADDRESS2);
+ 			this->write_word(ONENAND_DDP_CHIP1, this->base + ONENAND_REG_START_ADDRESS2);
  		ONENAND_SET_NEXT_BUFFERRAM(this);
  		buf += thislen;
  		thislen = min_t(int, mtd->writesize, len - read);
@@ -801,20 +817,59 @@ static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len,
 }
 
 /**
+ * onenand_transfer_auto_oob - [Internal] oob auto-placement transfer
+ * @param mtd		MTD device structure
+ * @param buf		destination address
+ * @param column	oob offset to read from
+ * @param thislen	oob length to read
+ */
+static int onenand_transfer_auto_oob(struct mtd_info *mtd, uint8_t *buf, int column,
+				int thislen)
+{
+	struct onenand_chip *this = mtd->priv;
+	struct nand_oobfree *free;
+	int readcol = column;
+	int readend = column + thislen;
+	int lastgap = 0;
+	uint8_t *oob_buf = this->page_buf + mtd->writesize;
+
+	for (free = this->ecclayout->oobfree; free->length; ++free) {
+		if (readcol >= lastgap)
+			readcol += free->offset - lastgap;
+		if (readend >= lastgap)
+			readend += free->offset - lastgap;
+		lastgap = free->offset + free->length;
+	}
+	this->read_bufferram(mtd, ONENAND_SPARERAM, oob_buf, 0, mtd->oobsize);
+	for (free = this->ecclayout->oobfree; free->length; ++free) {
+		int free_end = free->offset + free->length;
+		if (free->offset < readend && free_end > readcol) {
+			int st = max_t(int,free->offset,readcol);
+			int ed = min_t(int,free_end,readend);
+			int n = ed - st;
+			memcpy(buf, oob_buf + st, n);
+			buf += n;
+		}
+	}
+	return 0;
+}
+
+/**
  * onenand_do_read_oob - [MTD Interface] OneNAND read out-of-band
  * @param mtd		MTD device structure
  * @param from		offset to read from
  * @param len		number of bytes to read
  * @param retlen	pointer to variable to store the number of read bytes
  * @param buf		the databuffer to put data
+ * @param mode		operation mode
  *
  * OneNAND read out-of-band data from the spare area
  */
-int onenand_do_read_oob(struct mtd_info *mtd, loff_t from, size_t len,
-			size_t *retlen, u_char *buf)
+static int onenand_do_read_oob(struct mtd_info *mtd, loff_t from, size_t len,
+			size_t *retlen, u_char *buf, mtd_oob_mode_t mode)
 {
 	struct onenand_chip *this = mtd->priv;
-	int read = 0, thislen, column;
+	int read = 0, thislen, column, oobsize;
 	int ret = 0;
 
 	DEBUG(MTD_DEBUG_LEVEL3, "onenand_read_oob: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
@@ -822,21 +877,33 @@ int onenand_do_read_oob(struct mtd_info *mtd, loff_t from, size_t len,
 	/* Initialize return length value */
 	*retlen = 0;
 
+	if (mode == MTD_OOB_AUTO)
+		oobsize = this->ecclayout->oobavail;
+	else
+		oobsize = mtd->oobsize;
+
+	column = from & (mtd->oobsize - 1);
+
+	if (unlikely(column >= oobsize)) {
+		printk(KERN_ERR "onenand_read_oob: Attempted to start read outside oob\n");
+		return -EINVAL;
+	}
+
 	/* Do not allow reads past end of device */
-	if (unlikely((from + len) > mtd->size)) {
-		DEBUG(MTD_DEBUG_LEVEL0, "onenand_read_oob: Attempt read beyond end of device\n");
+	if (unlikely(from >= mtd->size ||
+		     column + len > ((mtd->size >> this->page_shift) -
+				     (from >> this->page_shift)) * oobsize)) {
+		printk(KERN_ERR "onenand_read_oob: Attempted to read beyond end of device\n");
 		return -EINVAL;
 	}
 
 	/* Grab the lock and see if the device is available */
 	onenand_get_device(mtd, FL_READING);
 
-	column = from & (mtd->oobsize - 1);
-
 	while (read < len) {
 		cond_resched();
 
-		thislen = mtd->oobsize - column;
+		thislen = oobsize - column;
 		thislen = min_t(int, thislen, len);
 
 		this->command(mtd, ONENAND_CMD_READOOB, from, mtd->oobsize);
@@ -846,11 +913,14 @@ int onenand_do_read_oob(struct mtd_info *mtd, loff_t from, size_t len,
 		ret = this->wait(mtd, FL_READING);
 		/* First copy data and check return value for ECC handling */
 
-		this->read_bufferram(mtd, ONENAND_SPARERAM, buf, column, thislen);
+		if (mode == MTD_OOB_AUTO)
+			onenand_transfer_auto_oob(mtd, buf, column, thislen);
+		else
+			this->read_bufferram(mtd, ONENAND_SPARERAM, buf, column, thislen);
 
 		if (ret) {
-			DEBUG(MTD_DEBUG_LEVEL0, "onenand_read_oob: read failed = 0x%x\n", ret);
-			goto out;
+			printk(KERN_ERR "onenand_read_oob: read failed = 0x%x\n", ret);
+			break;
 		}
 
 		read += thislen;
@@ -868,7 +938,6 @@ int onenand_do_read_oob(struct mtd_info *mtd, loff_t from, size_t len,
 		}
 	}
 
-out:
 	/* Deselect and wake up anyone waiting on the device */
 	onenand_release_device(mtd);
 
@@ -885,10 +954,132 @@ out:
 static int onenand_read_oob(struct mtd_info *mtd, loff_t from,
 			    struct mtd_oob_ops *ops)
 {
-	BUG_ON(ops->mode != MTD_OOB_PLACE);
-
+	switch (ops->mode) {
+	case MTD_OOB_PLACE:
+	case MTD_OOB_AUTO:
+		break;
+	case MTD_OOB_RAW:
+		/* Not implemented yet */
+	default:
+		return -EINVAL;
+	}
 	return onenand_do_read_oob(mtd, from + ops->ooboffs, ops->ooblen,
-				   &ops->oobretlen, ops->oobbuf);
+				   &ops->oobretlen, ops->oobbuf, ops->mode);
+}
+
+/**
+ * onenand_bbt_wait - [DEFAULT] wait until the command is done
+ * @param mtd		MTD device structure
+ * @param state		state to select the max. timeout value
+ *
+ * Wait for command done.
+ */
+static int onenand_bbt_wait(struct mtd_info *mtd, int state)
+{
+	struct onenand_chip *this = mtd->priv;
+	unsigned long timeout;
+	unsigned int interrupt;
+	unsigned int ctrl;
+
+	/* The 20 msec is enough */
+	timeout = jiffies + msecs_to_jiffies(20);
+	while (time_before(jiffies, timeout)) {
+		interrupt = this->read_word(this->base + ONENAND_REG_INTERRUPT);
+		if (interrupt & ONENAND_INT_MASTER)
+			break;
+	}
+	/* To get correct interrupt status in timeout case */
+	interrupt = this->read_word(this->base + ONENAND_REG_INTERRUPT);
+	ctrl = this->read_word(this->base + ONENAND_REG_CTRL_STATUS);
+
+	if (ctrl & ONENAND_CTRL_ERROR) {
+		printk(KERN_DEBUG "onenand_bbt_wait: controller error = 0x%04x\n", ctrl);
+		/* Initial bad block case */
+		if (ctrl & ONENAND_CTRL_LOAD)
+			return ONENAND_BBT_READ_ERROR;
+		return ONENAND_BBT_READ_FATAL_ERROR;
+	}
+
+	if (interrupt & ONENAND_INT_READ) {
+		int ecc = this->read_word(this->base + ONENAND_REG_ECC_STATUS);
+		if (ecc & ONENAND_ECC_2BIT_ALL)
+			return ONENAND_BBT_READ_ERROR;
+	} else {
+		printk(KERN_ERR "onenand_bbt_wait: read timeout!"
+			"ctrl=0x%04x intr=0x%04x\n", ctrl, interrupt);
+		return ONENAND_BBT_READ_FATAL_ERROR;
+	}
+
+	return 0;
+}
+
+/**
+ * onenand_bbt_read_oob - [MTD Interface] OneNAND read out-of-band for bbt scan
+ * @param mtd		MTD device structure
+ * @param from		offset to read from
+ * @param @ops		oob operation description structure
+ *
+ * OneNAND read out-of-band data from the spare area for bbt scan
+ */
+int onenand_bbt_read_oob(struct mtd_info *mtd, loff_t from, 
+			    struct mtd_oob_ops *ops)
+{
+	struct onenand_chip *this = mtd->priv;
+	int read = 0, thislen, column;
+	int ret = 0;
+	size_t len = ops->ooblen;
+	u_char *buf = ops->oobbuf;
+
+	DEBUG(MTD_DEBUG_LEVEL3, "onenand_bbt_read_oob: from = 0x%08x, len = %zi\n", (unsigned int) from, len);
+
+	/* Initialize return value */
+	ops->oobretlen = 0;
+
+	/* Do not allow reads past end of device */
+	if (unlikely((from + len) > mtd->size)) {
+		printk(KERN_ERR "onenand_bbt_read_oob: Attempt read beyond end of device\n");
+		return ONENAND_BBT_READ_FATAL_ERROR;
+	}
+
+	/* Grab the lock and see if the device is available */
+	onenand_get_device(mtd, FL_READING);
+
+	column = from & (mtd->oobsize - 1);
+
+	while (read < len) {
+		cond_resched();
+
+		thislen = mtd->oobsize - column;
+		thislen = min_t(int, thislen, len);
+
+		this->command(mtd, ONENAND_CMD_READOOB, from, mtd->oobsize);
+
+		onenand_update_bufferram(mtd, from, 0);
+
+		ret = onenand_bbt_wait(mtd, FL_READING);
+		if (ret)
+			break;
+
+		this->read_bufferram(mtd, ONENAND_SPARERAM, buf, column, thislen);
+		read += thislen;
+		if (read == len)
+			break;
+
+		buf += thislen;
+
+		/* Read more? */
+		if (read < len) {
+			/* Update Page size */
+			from += mtd->writesize;
+			column = 0;
+		}
+	}
+
+	/* Deselect and wake up anyone waiting on the device */
+	onenand_release_device(mtd);
+
+	ops->oobretlen = read;
+	return ret;
 }
 
 #ifdef CONFIG_MTD_ONENAND_VERIFY_WRITE
@@ -897,14 +1088,12 @@ static int onenand_read_oob(struct mtd_info *mtd, loff_t from,
  * @param mtd		MTD device structure
  * @param buf		the databuffer to verify
  * @param to		offset to read from
- * @param len		number of bytes to read and compare
  *
  */
-static int onenand_verify_oob(struct mtd_info *mtd, const u_char *buf, loff_t to, int len)
+static int onenand_verify_oob(struct mtd_info *mtd, const u_char *buf, loff_t to)
 {
 	struct onenand_chip *this = mtd->priv;
-	char *readp = this->page_buf;
-	int column = to & (mtd->oobsize - 1);
+	char *readp = this->page_buf + mtd->writesize;
 	int status, i;
 
 	this->command(mtd, ONENAND_CMD_READOOB, to, mtd->oobsize);
@@ -913,9 +1102,8 @@ static int onenand_verify_oob(struct mtd_info *mtd, const u_char *buf, loff_t to
 	if (status)
 		return status;
 
-	this->read_bufferram(mtd, ONENAND_SPARERAM, readp, column, len);
-
-	for(i = 0; i < len; i++)
+	this->read_bufferram(mtd, ONENAND_SPARERAM, readp, 0, mtd->oobsize);
+	for(i = 0; i < mtd->oobsize; i++)
 		if (buf[i] != 0xFF && buf[i] != readp[i])
 			return -EBADMSG;
 
@@ -923,41 +1111,51 @@ static int onenand_verify_oob(struct mtd_info *mtd, const u_char *buf, loff_t to
 }
 
 /**
- * onenand_verify_page - [GENERIC] verify the chip contents after a write
- * @param mtd		MTD device structure
- * @param buf		the databuffer to verify
+ * onenand_verify - [GENERIC] verify the chip contents after a write
+ * @param mtd          MTD device structure
+ * @param buf          the databuffer to verify
+ * @param addr         offset to read from
+ * @param len          number of bytes to read and compare
  *
- * Check DataRAM area directly
  */
-static int onenand_verify_page(struct mtd_info *mtd, u_char *buf, loff_t addr)
+static int onenand_verify(struct mtd_info *mtd, const u_char *buf, loff_t addr, size_t len)
 {
 	struct onenand_chip *this = mtd->priv;
-	void __iomem *dataram0, *dataram1;
+	void __iomem *dataram;
 	int ret = 0;
+	int thislen, column;
 
-	/* In partial page write, just skip it */
-	if ((addr & (mtd->writesize - 1)) != 0)
-		return 0;
+	while (len != 0) {
+		thislen = min_t(int, mtd->writesize, len);
+		column = addr & (mtd->writesize - 1);
+		if (column + thislen > mtd->writesize)
+			thislen = mtd->writesize - column;
 
-	this->command(mtd, ONENAND_CMD_READ, addr, mtd->writesize);
+		this->command(mtd, ONENAND_CMD_READ, addr, mtd->writesize);
 
-	ret = this->wait(mtd, FL_READING);
-	if (ret)
-		return ret;
+		onenand_update_bufferram(mtd, addr, 0);
+
+		ret = this->wait(mtd, FL_READING);
+		if (ret)
+			return ret;
 
-	onenand_update_bufferram(mtd, addr, 1);
+		onenand_update_bufferram(mtd, addr, 1);
 
-	/* Check, if the two dataram areas are same */
-	dataram0 = this->base + ONENAND_DATARAM;
-	dataram1 = dataram0 + mtd->writesize;
+		dataram = this->base + ONENAND_DATARAM;
+		dataram += onenand_bufferram_offset(mtd, ONENAND_DATARAM);
 
-	if (memcmp(dataram0, dataram1, mtd->writesize))
-		return -EBADMSG;
+		if (memcmp(buf, dataram + column, thislen))
+			return -EBADMSG;
+
+		len -= thislen;
+		buf += thislen;
+		addr += thislen;
+	}
 
 	return 0;
 }
 #else
-#define onenand_verify_page(...)	(0)
+#define onenand_verify(...)		(0)
 #define onenand_verify_oob(...)		(0)
 #endif
 
@@ -988,60 +1186,57 @@ static int onenand_write(struct mtd_info *mtd, loff_t to, size_t len,
 
 	/* Do not allow writes past end of device */
 	if (unlikely((to + len) > mtd->size)) {
-		DEBUG(MTD_DEBUG_LEVEL0, "onenand_write: Attempt write to past end of device\n");
+		printk(KERN_ERR "onenand_write: Attempt write to past end of device\n");
 		return -EINVAL;
 	}
 
 	/* Reject writes, which are not page aligned */
         if (unlikely(NOTALIGNED(to)) || unlikely(NOTALIGNED(len))) {
-                DEBUG(MTD_DEBUG_LEVEL0, "onenand_write: Attempt to write not page aligned data\n");
+                printk(KERN_ERR "onenand_write: Attempt to write not page aligned data\n");
                 return -EINVAL;
         }
 
 	column = to & (mtd->writesize - 1);
-	subpage = column || (len & (mtd->writesize - 1));
 
 	/* Grab the lock and see if the device is available */
 	onenand_get_device(mtd, FL_WRITING);
 
 	/* Loop until all data write */
 	while (written < len) {
-		int bytes = mtd->writesize;
-		int thislen = min_t(int, bytes, len - written);
+		int thislen = min_t(int, mtd->writesize - column, len - written);
 		u_char *wbuf = (u_char *) buf;
 
 		cond_resched();
 
-		this->command(mtd, ONENAND_CMD_BUFFERRAM, to, bytes);
+		this->command(mtd, ONENAND_CMD_BUFFERRAM, to, thislen);
 
 		/* Partial page write */
+		subpage = thislen < mtd->writesize;
 		if (subpage) {
-			bytes = min_t(int, bytes - column, (int) len);
 			memset(this->page_buf, 0xff, mtd->writesize);
-			memcpy(this->page_buf + column, buf, bytes);
+			memcpy(this->page_buf + column, buf, thislen);
 			wbuf = this->page_buf;
-			/* Even though partial write, we need page size */
-			thislen = mtd->writesize;
 		}
 
-		this->write_bufferram(mtd, ONENAND_DATARAM, wbuf, 0, thislen);
+		this->write_bufferram(mtd, ONENAND_DATARAM, wbuf, 0, mtd->writesize);
 		this->write_bufferram(mtd, ONENAND_SPARERAM, ffchars, 0, mtd->oobsize);
 
 		this->command(mtd, ONENAND_CMD_PROG, to, mtd->writesize);
 
+		ret = this->wait(mtd, FL_WRITING);
+
 		/* In partial page write we don't update bufferram */
-		onenand_update_bufferram(mtd, to, !subpage);
+		onenand_update_bufferram(mtd, to, !ret && !subpage);
 
-		ret = this->wait(mtd, FL_WRITING);
 		if (ret) {
-			DEBUG(MTD_DEBUG_LEVEL0, "onenand_write: write filaed %d\n", ret);
+			printk(KERN_ERR "onenand_write: write filaed %d\n", ret);
 			break;
 		}
 
 		/* Only check verify write turn on */
-		ret = onenand_verify_page(mtd, (u_char *) wbuf, to);
+		ret = onenand_verify(mtd, (u_char *) wbuf, to, thislen);
 		if (ret) {
-			DEBUG(MTD_DEBUG_LEVEL0, "onenand_write: verify failed %d\n", ret);
+			printk(KERN_ERR "onenand_write: verify failed %d\n", ret);
 			break;
 		}
 
@@ -1064,20 +1259,58 @@ static int onenand_write(struct mtd_info *mtd, loff_t to, size_t len,
 }
 
 /**
+ * onenand_fill_auto_oob - [Internal] oob auto-placement transfer
+ * @param mtd		MTD device structure
+ * @param oob_buf	oob buffer
+ * @param buf		source address
+ * @param column	oob offset to write to
+ * @param thislen	oob length to write
+ */
+static int onenand_fill_auto_oob(struct mtd_info *mtd, u_char *oob_buf,
+				  const u_char *buf, int column, int thislen)
+{
+	struct onenand_chip *this = mtd->priv;
+	struct nand_oobfree *free;
+	int writecol = column;
+	int writeend = column + thislen;
+	int lastgap = 0;
+
+	for (free = this->ecclayout->oobfree; free->length; ++free) {
+		if (writecol >= lastgap)
+			writecol += free->offset - lastgap;
+		if (writeend >= lastgap)
+			writeend += free->offset - lastgap;
+		lastgap = free->offset + free->length;
+	}
+	for (free = this->ecclayout->oobfree; free->length; ++free) {
+		int free_end = free->offset + free->length;
+		if (free->offset < writeend && free_end > writecol) {
+			int st = max_t(int,free->offset,writecol);
+			int ed = min_t(int,free_end,writeend);
+			int n = ed - st;
+			memcpy(oob_buf + st, buf, n);
+			buf += n;
+		}
+	}
+	return 0;
+}
+
+/**
  * onenand_do_write_oob - [Internal] OneNAND write out-of-band
  * @param mtd		MTD device structure
  * @param to		offset to write to
  * @param len		number of bytes to write
  * @param retlen	pointer to variable to store the number of written bytes
  * @param buf		the data to write
+ * @param mode		operation mode
  *
  * OneNAND write out-of-band
  */
 static int onenand_do_write_oob(struct mtd_info *mtd, loff_t to, size_t len,
-				size_t *retlen, const u_char *buf)
+				size_t *retlen, const u_char *buf, mtd_oob_mode_t mode)
 {
 	struct onenand_chip *this = mtd->priv;
-	int column, ret = 0;
+	int column, ret = 0, oobsize;
 	int written = 0;
 
 	DEBUG(MTD_DEBUG_LEVEL3, "onenand_write_oob: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len);
@@ -1085,9 +1318,30 @@ static int onenand_do_write_oob(struct mtd_info *mtd, loff_t to, size_t len,
 	/* Initialize retlen, in case of early exit */
 	*retlen = 0;
 
-	/* Do not allow writes past end of device */
-	if (unlikely((to + len) > mtd->size)) {
-		DEBUG(MTD_DEBUG_LEVEL0, "onenand_write_oob: Attempt write to past end of device\n");
+	if (mode == MTD_OOB_AUTO)
+		oobsize = this->ecclayout->oobavail;
+	else
+		oobsize = mtd->oobsize;
+
+	column = to & (mtd->oobsize - 1);
+
+	if (unlikely(column >= oobsize)) {
+		printk(KERN_ERR "onenand_write_oob: Attempted to start write outside oob\n");
+		return -EINVAL;
+	}
+
+	/* For compatibility with NAND: Do not allow write past end of page */
+	if (column + len > oobsize) {
+		printk(KERN_ERR "onenand_write_oob: "
+		      "Attempt to write past end of page\n");
+		return -EINVAL;
+	}
+
+	/* Do not allow reads past end of device */
+	if (unlikely(to >= mtd->size ||
+		     column + len > ((mtd->size >> this->page_shift) -
+				     (to >> this->page_shift)) * oobsize)) {
+		printk(KERN_ERR "onenand_write_oob: Attempted to write past end of device\n");
 		return -EINVAL;
 	}
 
@@ -1096,18 +1350,19 @@ static int onenand_do_write_oob(struct mtd_info *mtd, loff_t to, size_t len,
 
 	/* Loop until all data write */
 	while (written < len) {
-		int thislen = min_t(int, mtd->oobsize, len - written);
+		int thislen = min_t(int, oobsize, len - written);
 
 		cond_resched();
 
-		column = to & (mtd->oobsize - 1);
-
 		this->command(mtd, ONENAND_CMD_BUFFERRAM, to, mtd->oobsize);
 
 		/* We send data to spare ram with oobsize
 		 * to prevent byte access */
 		memset(this->page_buf, 0xff, mtd->oobsize);
-		memcpy(this->page_buf + column, buf, thislen);
+		if (mode == MTD_OOB_AUTO)
+			onenand_fill_auto_oob(mtd, this->page_buf, buf, column, thislen);
+		else
+			memcpy(this->page_buf + column, buf, thislen);
 		this->write_bufferram(mtd, ONENAND_SPARERAM, this->page_buf, 0, mtd->oobsize);
 
 		this->command(mtd, ONENAND_CMD_PROGOOB, to, mtd->oobsize);
@@ -1116,26 +1371,25 @@ static int onenand_do_write_oob(struct mtd_info *mtd, loff_t to, size_t len,
 
 		ret = this->wait(mtd, FL_WRITING);
 		if (ret) {
-			DEBUG(MTD_DEBUG_LEVEL0, "onenand_write_oob: write filaed %d\n", ret);
-			goto out;
+			printk(KERN_ERR "onenand_write_oob: write failed %d\n", ret);
+			break;
 		}
 
-		ret = onenand_verify_oob(mtd, buf, to, thislen);
+		ret = onenand_verify_oob(mtd, this->page_buf, to);
 		if (ret) {
-			DEBUG(MTD_DEBUG_LEVEL0, "onenand_write_oob: verify failed %d\n", ret);
-			goto out;
+			printk(KERN_ERR "onenand_write_oob: verify failed %d\n", ret);
+			break;
 		}
 
 		written += thislen;
-
 		if (written == len)
 			break;
 
-		to += thislen;
+		to += mtd->writesize;
 		buf += thislen;
+		column = 0;
 	}
 
-out:
 	/* Deselect and wake up anyone waiting on the device */
 	onenand_release_device(mtd);
 
@@ -1153,10 +1407,17 @@ out:
 static int onenand_write_oob(struct mtd_info *mtd, loff_t to,
 			     struct mtd_oob_ops *ops)
 {
-	BUG_ON(ops->mode != MTD_OOB_PLACE);
-
+	switch (ops->mode) {
+	case MTD_OOB_PLACE:
+	case MTD_OOB_AUTO:
+		break;
+	case MTD_OOB_RAW:
+		/* Not implemented yet */
+	default:
+		return -EINVAL;
+	}
 	return onenand_do_write_oob(mtd, to + ops->ooboffs, ops->ooblen,
-				    &ops->oobretlen, ops->oobbuf);
+				    &ops->oobretlen, ops->oobbuf, ops->mode);
 }
 
 /**
@@ -1199,19 +1460,19 @@ static int onenand_erase(struct mtd_info *mtd, struct erase_info *instr)
 
 	/* Start address must align on block boundary */
 	if (unlikely(instr->addr & (block_size - 1))) {
-		DEBUG(MTD_DEBUG_LEVEL0, "onenand_erase: Unaligned address\n");
+		printk(KERN_ERR "onenand_erase: Unaligned address\n");
 		return -EINVAL;
 	}
 
 	/* Length must align on block boundary */
 	if (unlikely(instr->len & (block_size - 1))) {
-		DEBUG(MTD_DEBUG_LEVEL0, "onenand_erase: Length not block aligned\n");
+		printk(KERN_ERR "onenand_erase: Length not block aligned\n");
 		return -EINVAL;
 	}
 
 	/* Do not allow erase past end of device */
 	if (unlikely((instr->len + instr->addr) > mtd->size)) {
-		DEBUG(MTD_DEBUG_LEVEL0, "onenand_erase: Erase past end of device\n");
+		printk(KERN_ERR "onenand_erase: Erase past end of device\n");
 		return -EINVAL;
 	}
 
@@ -1238,10 +1499,12 @@ static int onenand_erase(struct mtd_info *mtd, struct erase_info *instr)
 
 		this->command(mtd, ONENAND_CMD_ERASE, addr, block_size);
 
+		onenand_invalidate_bufferram(mtd, addr, block_size);
+
 		ret = this->wait(mtd, FL_ERASING);
 		/* Check, if it is write protected */
 		if (ret) {
-			DEBUG(MTD_DEBUG_LEVEL0, "onenand_erase: Failed erase, block %d\n", (unsigned) (addr >> this->erase_shift));
+			printk(KERN_ERR "onenand_erase: Failed erase, block %d\n", (unsigned) (addr >> this->erase_shift));
 			instr->state = MTD_ERASE_FAILED;
 			instr->fail_addr = addr;
 			goto erase_exit;
@@ -1322,7 +1585,7 @@ static int onenand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
 
         /* We write two bytes, so we dont have to mess with 16 bit access */
         ofs += mtd->oobsize + (bbm->badblockpos & ~0x01);
-        return onenand_do_write_oob(mtd, ofs , 2, &retlen, buf);
+        return onenand_do_write_oob(mtd, ofs , 2, &retlen, buf, MTD_OOB_PLACE);
 }
 
 /**
@@ -1491,6 +1754,8 @@ static int onenand_unlock_all(struct mtd_info *mtd)
 	struct onenand_chip *this = mtd->priv;
 
 	if (this->options & ONENAND_HAS_UNLOCK_ALL) {
+		/* Set start block address */
+		this->write_word(0, this->base + ONENAND_REG_START_BLOCK_ADDRESS);
 		/* Write unlock command */
 		this->command(mtd, ONENAND_CMD_UNLOCK_ALL, 0, 0);
 
@@ -1503,13 +1768,10 @@ static int onenand_unlock_all(struct mtd_info *mtd)
 			continue;
 
 		/* Workaround for all block unlock in DDP */
-		if (this->device_id & ONENAND_DEVICE_IS_DDP) {
-			loff_t ofs;
-			size_t len;
-
+		if (ONENAND_IS_DDP(this)) {
 			/* 1st block on another chip */
-			ofs = this->chipsize >> 1;
-			len = 1 << this->erase_shift;
+			loff_t ofs = this->chipsize >> 1;
+			size_t len = mtd->erasesize;
 
 			onenand_unlock(mtd, ofs, len);
 		}
@@ -1617,7 +1879,7 @@ static int do_otp_lock(struct mtd_info *mtd, loff_t from, size_t len,
 	this->command(mtd, ONENAND_CMD_OTP_ACCESS, 0, 0);
 	this->wait(mtd, FL_OTPING);
 
-	ret = onenand_do_write_oob(mtd, from, len, retlen, buf);
+	ret = onenand_do_write_oob(mtd, from, len, retlen, buf, MTD_OOB_PLACE);
 
 	/* Exit OTP access mode */
 	this->command(mtd, ONENAND_CMD_RESET, 0, 0);
@@ -1823,12 +2085,13 @@ static int onenand_lock_user_prot_reg(struct mtd_info *mtd, loff_t from,
 #endif	/* CONFIG_MTD_ONENAND_OTP */
 
 /**
- * onenand_lock_scheme - Check and set OneNAND lock scheme
+ * onenand_check_features - Check and set OneNAND features
  * @param mtd		MTD data structure
  *
- * Check and set OneNAND lock scheme
+ * Check and set OneNAND features
+ * - lock scheme
  */
-static void onenand_lock_scheme(struct mtd_info *mtd)
+static void onenand_check_features(struct mtd_info *mtd)
 {
 	struct onenand_chip *this = mtd->priv;
 	unsigned int density, process;
@@ -1961,26 +2224,28 @@ static int onenand_probe(struct mtd_info *mtd)
 	density = dev_id >> ONENAND_DEVICE_DENSITY_SHIFT;
 	this->chipsize = (16 << density) << 20;
 	/* Set density mask. it is used for DDP */
-	this->density_mask = (1 << (density + 6));
+	if (ONENAND_IS_DDP(this))
+		this->density_mask = (1 << (density + 6));
+	else
+		this->density_mask = 0;
 
 	/* OneNAND page size & block size */
 	/* The data buffer size is equal to page size */
 	mtd->writesize = this->read_word(this->base + ONENAND_REG_DATA_BUFFER_SIZE);
 	mtd->oobsize = mtd->writesize >> 5;
-	/* Pagers per block is always 64 in OneNAND */
+	/* Pages per a block are always 64 in OneNAND */
 	mtd->erasesize = mtd->writesize << 6;
 
 	this->erase_shift = ffs(mtd->erasesize) - 1;
 	this->page_shift = ffs(mtd->writesize) - 1;
-	this->ppb_shift = (this->erase_shift - this->page_shift);
-	this->page_mask = (mtd->erasesize / mtd->writesize) - 1;
+	this->page_mask = (1 << (this->erase_shift - this->page_shift)) - 1;
 
 	/* REVIST: Multichip handling */
 
 	mtd->size = this->chipsize;
 
-	/* Check OneNAND lock scheme */
-	onenand_lock_scheme(mtd);
+	/* Check OneNAND features */
+	onenand_check_features(mtd);
 
 	return 0;
 }
@@ -2021,6 +2286,7 @@ static void onenand_resume(struct mtd_info *mtd)
  */
 int onenand_scan(struct mtd_info *mtd, int maxchips)
 {
+	int i;
 	struct onenand_chip *this = mtd->priv;
 
 	if (!this->read_word)
@@ -2092,12 +2358,21 @@ int onenand_scan(struct mtd_info *mtd, int maxchips)
 	}
 
 	this->subpagesize = mtd->writesize >> mtd->subpage_sft;
+
+	/*
+	 * The number of bytes available for a client to place data into
+	 * the out of band area
+	 */
+	this->ecclayout->oobavail = 0;
+	for (i = 0; this->ecclayout->oobfree[i].length; i++)
+		this->ecclayout->oobavail +=
+			this->ecclayout->oobfree[i].length;
+
 	mtd->ecclayout = this->ecclayout;
 
 	/* Fill in remaining MTD driver data */
 	mtd->type = MTD_NANDFLASH;
 	mtd->flags = MTD_CAP_NANDFLASH;
-	mtd->ecctype = MTD_ECC_SW;
 	mtd->erase = onenand_erase;
 	mtd->point = NULL;
 	mtd->unpoint = NULL;
@@ -2144,8 +2419,11 @@ void onenand_release(struct mtd_info *mtd)
 	del_mtd_device (mtd);
 
 	/* Free bad block table memory, if allocated */
-	if (this->bbm)
+	if (this->bbm) {
+		struct bbm_info *bbm = this->bbm;
+		kfree(bbm->bbt);
 		kfree(this->bbm);
+	}
 	/* Buffer allocated by onenand_scan */
 	if (this->options & ONENAND_PAGEBUF_ALLOC)
 		kfree(this->page_buf);
diff --git a/drivers/mtd/onenand/onenand_bbt.c b/drivers/mtd/onenand/onenand_bbt.c
index 98f8fd1..aecdd50 100644
--- a/drivers/mtd/onenand/onenand_bbt.c
+++ b/drivers/mtd/onenand/onenand_bbt.c
@@ -17,8 +17,8 @@
 #include <linux/mtd/onenand.h>
 #include <linux/mtd/compatmac.h>
 
-extern int onenand_do_read_oob(struct mtd_info *mtd, loff_t from, size_t len,
-			       size_t *retlen, u_char *buf);
+extern int onenand_bbt_read_oob(struct mtd_info *mtd, loff_t from,
+				struct mtd_oob_ops *ops);
 
 /**
  * check_short_pattern - [GENERIC] check if a pattern is in the buffer
@@ -65,10 +65,11 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr
 	int startblock;
 	loff_t from;
 	size_t readlen, ooblen;
+	struct mtd_oob_ops ops;
 
 	printk(KERN_INFO "Scanning device for bad blocks\n");
 
-	len = 1;
+	len = 2;
 
 	/* We need only read few bytes from the OOB area */
 	scanlen = ooblen = 0;
@@ -82,22 +83,24 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr
 	startblock = 0;
 	from = 0;
 
+	ops.mode = MTD_OOB_PLACE;
+	ops.ooblen = readlen;
+	ops.oobbuf = buf;
+	ops.len = ops.ooboffs = ops.retlen = ops.oobretlen = 0;
+
 	for (i = startblock; i < numblocks; ) {
 		int ret;
 
 		for (j = 0; j < len; j++) {
-			size_t retlen;
-
 			/* No need to read pages fully,
 			 * just read required OOB bytes */
-			ret = onenand_do_read_oob(mtd, from + j * mtd->writesize + bd->offs,
-						  readlen, &retlen, &buf[0]);
+			ret = onenand_bbt_read_oob(mtd, from + j * mtd->writesize + bd->offs, &ops);
 
 			/* If it is a initial bad block, just ignore it */
-			if (ret && !(ret & ONENAND_CTRL_LOAD))
-				return ret;
+			if (ret == ONENAND_BBT_READ_FATAL_ERROR)
+				return -EIO;
 
-			if (check_short_pattern(&buf[j * scanlen], scanlen, mtd->writesize, bd)) {
+			if (ret || check_short_pattern(&buf[j * scanlen], scanlen, mtd->writesize, bd)) {
 				bbm->bbt[i >> 3] |= 0x03 << (i & 0x6);
 				printk(KERN_WARNING "Bad eraseblock %d at 0x%08x\n",
 					i >> 1, (unsigned int) from);
@@ -168,8 +171,8 @@ static int onenand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt)
  * marked good / bad blocks and writes the bad block table(s) to
  * the selected place.
  *
- * The bad block table memory is allocated here. It must be freed
- * by calling the onenand_free_bbt function.
+ * The bad block table memory is allocated here. It is freed
+ * by the onenand_release function.
  *
  */
 int onenand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
diff --git a/drivers/mtd/redboot.c b/drivers/mtd/redboot.c
index 035cd9b..a61351f 100644
--- a/drivers/mtd/redboot.c
+++ b/drivers/mtd/redboot.c
@@ -94,8 +94,19 @@ static int parse_redboot_partitions(struct mtd_info *master,
 			 * (NOTE: this is 'size' not 'data_length'; size is
 			 * the full size of the entry.)
 			 */
-			if (swab32(buf[i].size) == master->erasesize) {
+
+			/* RedBoot can combine the FIS directory and
+			   config partitions into a single eraseblock;
+			   we assume wrong-endian if either the swapped
+			   'size' matches the eraseblock size precisely,
+			   or if the swapped size actually fits in an
+			   eraseblock while the unswapped size doesn't. */
+			if (swab32(buf[i].size) == master->erasesize ||
+			    (buf[i].size > master->erasesize
+			     && swab32(buf[i].size) < master->erasesize)) {
 				int j;
+				/* Update numslots based on actual FIS directory size */
+				numslots = swab32(buf[i].size) / sizeof (struct fis_image_desc);
 				for (j = 0; j < numslots; ++j) {
 
 					/* A single 0xff denotes a deleted entry.
@@ -120,11 +131,11 @@ static int parse_redboot_partitions(struct mtd_info *master,
 					swab32s(&buf[j].desc_cksum);
 					swab32s(&buf[j].file_cksum);
 				}
+			} else if (buf[i].size < master->erasesize) {
+				/* Update numslots based on actual FIS directory size */
+				numslots = buf[i].size / sizeof(struct fis_image_desc);
 			}
 			break;
-		} else {
-			/* re-calculate of real numslots */
-			numslots = buf[i].size / sizeof(struct fis_image_desc);
 		}
 	}
 	if (i == numslots) {