Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "More hardware support across the field including a bunch of device
  drivers.  The highlight however really are further steps towards
  device tree.

  This has been sitting in -next for ages.  All MIPS _defconfigs have
  been tested to boot or where I don't have hardware available, to at
  least build fine."

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (77 commits)
  MIPS: Loongson 1B: Add defconfig
  MIPS: Loongson 1B: Add board support
  MIPS: Netlogic: early console fix
  MIPS: Netlogic: Fix indentation of smpboot.S
  MIPS: Netlogic: remove cpu_has_dc_aliases define for XLP
  MIPS: Netlogic: Remove unused pcibios_fixups
  MIPS: Netlogic: Add XLP SoC devices in FDT
  MIPS: Netlogic: Add IRQ mappings for more devices
  MIPS: Netlogic: USB support for XLP
  MIPS: Netlogic: XLP PCIe controller support.
  MIPS: Netlogic: Platform changes for XLR/XLS I2C
  MIPS: Netlogic: Platform NAND/NOR flash support
  MIPS: Netlogic: Platform changes for XLS USB
  MIPS: Netlogic: Remove NETLOGIC_ prefix
  MIPS: Netlogic: SMP wakeup code update
  MIPS: Netlogic: Update comments in smpboot.S
  MIPS: BCM63XX: Add 96328avng reference board
  MIPS: Expose PCIe drivers for MIPS
  MIPS: BCM63XX: Add PCIe Support for BCM6328
  MIPS: BCM63XX: Move the PCI initialization into its own function
  ...

1 files changed, 192 insertions, 36 deletions

diff --git a/drivers/mtd/nand/jz4740_nand.c b/drivers/mtd/nand/jz4740_nand.c
index a6fa884..100b677 100644
--- a/drivers/mtd/nand/jz4740_nand.c
+++ b/drivers/mtd/nand/jz4740_nand.c
@@ -52,9 +52,10 @@
 
 #define JZ_NAND_CTRL_ENABLE_CHIP(x) BIT((x) << 1)
 #define JZ_NAND_CTRL_ASSERT_CHIP(x) BIT(((x) << 1) + 1)
+#define JZ_NAND_CTRL_ASSERT_CHIP_MASK 0xaa
 
-#define JZ_NAND_MEM_ADDR_OFFSET 0x10000
 #define JZ_NAND_MEM_CMD_OFFSET 0x08000
+#define JZ_NAND_MEM_ADDR_OFFSET 0x10000
 
 struct jz_nand {
 	struct mtd_info mtd;
@@ -62,8 +63,11 @@ struct jz_nand {
 	void __iomem *base;
 	struct resource *mem;
 
-	void __iomem *bank_base;
-	struct resource *bank_mem;
+	unsigned char banks[JZ_NAND_NUM_BANKS];
+	void __iomem *bank_base[JZ_NAND_NUM_BANKS];
+	struct resource *bank_mem[JZ_NAND_NUM_BANKS];
+
+	int selected_bank;
 
 	struct jz_nand_platform_data *pdata;
 	bool is_reading;
@@ -74,26 +78,50 @@ static inline struct jz_nand *mtd_to_jz_nand(struct mtd_info *mtd)
 	return container_of(mtd, struct jz_nand, mtd);
 }
 
+static void jz_nand_select_chip(struct mtd_info *mtd, int chipnr)
+{
+	struct jz_nand *nand = mtd_to_jz_nand(mtd);
+	struct nand_chip *chip = mtd->priv;
+	uint32_t ctrl;
+	int banknr;
+
+	ctrl = readl(nand->base + JZ_REG_NAND_CTRL);
+	ctrl &= ~JZ_NAND_CTRL_ASSERT_CHIP_MASK;
+
+	if (chipnr == -1) {
+		banknr = -1;
+	} else {
+		banknr = nand->banks[chipnr] - 1;
+		chip->IO_ADDR_R = nand->bank_base[banknr];
+		chip->IO_ADDR_W = nand->bank_base[banknr];
+	}
+	writel(ctrl, nand->base + JZ_REG_NAND_CTRL);
+
+	nand->selected_bank = banknr;
+}
+
 static void jz_nand_cmd_ctrl(struct mtd_info *mtd, int dat, unsigned int ctrl)
 {
 	struct jz_nand *nand = mtd_to_jz_nand(mtd);
 	struct nand_chip *chip = mtd->priv;
 	uint32_t reg;
+	void __iomem *bank_base = nand->bank_base[nand->selected_bank];
+
+	BUG_ON(nand->selected_bank < 0);
 
 	if (ctrl & NAND_CTRL_CHANGE) {
 		BUG_ON((ctrl & NAND_ALE) && (ctrl & NAND_CLE));
 		if (ctrl & NAND_ALE)
-			chip->IO_ADDR_W = nand->bank_base + JZ_NAND_MEM_ADDR_OFFSET;
+			bank_base += JZ_NAND_MEM_ADDR_OFFSET;
 		else if (ctrl & NAND_CLE)
-			chip->IO_ADDR_W = nand->bank_base + JZ_NAND_MEM_CMD_OFFSET;
-		else
-			chip->IO_ADDR_W = nand->bank_base;
+			bank_base += JZ_NAND_MEM_CMD_OFFSET;
+		chip->IO_ADDR_W = bank_base;
 
 		reg = readl(nand->base + JZ_REG_NAND_CTRL);
 		if (ctrl & NAND_NCE)
-			reg |= JZ_NAND_CTRL_ASSERT_CHIP(0);
+			reg |= JZ_NAND_CTRL_ASSERT_CHIP(nand->selected_bank);
 		else
-			reg &= ~JZ_NAND_CTRL_ASSERT_CHIP(0);
+			reg &= ~JZ_NAND_CTRL_ASSERT_CHIP(nand->selected_bank);
 		writel(reg, nand->base + JZ_REG_NAND_CTRL);
 	}
 	if (dat != NAND_CMD_NONE)
@@ -252,7 +280,7 @@ static int jz_nand_correct_ecc_rs(struct mtd_info *mtd, uint8_t *dat,
 }
 
 static int jz_nand_ioremap_resource(struct platform_device *pdev,
-	const char *name, struct resource **res, void __iomem **base)
+	const char *name, struct resource **res, void *__iomem *base)
 {
 	int ret;
 
@@ -288,6 +316,90 @@ err:
 	return ret;
 }
 
+static inline void jz_nand_iounmap_resource(struct resource *res, void __iomem *base)
+{
+	iounmap(base);
+	release_mem_region(res->start, resource_size(res));
+}
+
+static int __devinit jz_nand_detect_bank(struct platform_device *pdev, struct jz_nand *nand, unsigned char bank, size_t chipnr, uint8_t *nand_maf_id, uint8_t *nand_dev_id) {
+	int ret;
+	int gpio;
+	char gpio_name[9];
+	char res_name[6];
+	uint32_t ctrl;
+	struct mtd_info *mtd = &nand->mtd;
+	struct nand_chip *chip = &nand->chip;
+
+	/* Request GPIO port. */
+	gpio = JZ_GPIO_MEM_CS0 + bank - 1;
+	sprintf(gpio_name, "NAND CS%d", bank);
+	ret = gpio_request(gpio, gpio_name);
+	if (ret) {
+		dev_warn(&pdev->dev,
+			"Failed to request %s gpio %d: %d\n",
+			gpio_name, gpio, ret);
+		goto notfound_gpio;
+	}
+
+	/* Request I/O resource. */
+	sprintf(res_name, "bank%d", bank);
+	ret = jz_nand_ioremap_resource(pdev, res_name,
+					&nand->bank_mem[bank - 1],
+					&nand->bank_base[bank - 1]);
+	if (ret)
+		goto notfound_resource;
+
+	/* Enable chip in bank. */
+	jz_gpio_set_function(gpio, JZ_GPIO_FUNC_MEM_CS0);
+	ctrl = readl(nand->base + JZ_REG_NAND_CTRL);
+	ctrl |= JZ_NAND_CTRL_ENABLE_CHIP(bank - 1);
+	writel(ctrl, nand->base + JZ_REG_NAND_CTRL);
+
+	if (chipnr == 0) {
+		/* Detect first chip. */
+		ret = nand_scan_ident(mtd, 1, NULL);
+		if (ret)
+			goto notfound_id;
+
+		/* Retrieve the IDs from the first chip. */
+		chip->select_chip(mtd, 0);
+		chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
+		chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
+		*nand_maf_id = chip->read_byte(mtd);
+		*nand_dev_id = chip->read_byte(mtd);
+	} else {
+		/* Detect additional chip. */
+		chip->select_chip(mtd, chipnr);
+		chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
+		chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
+		if (*nand_maf_id != chip->read_byte(mtd)
+		 || *nand_dev_id != chip->read_byte(mtd)) {
+			ret = -ENODEV;
+			goto notfound_id;
+		}
+
+		/* Update size of the MTD. */
+		chip->numchips++;
+		mtd->size += chip->chipsize;
+	}
+
+	dev_info(&pdev->dev, "Found chip %i on bank %i\n", chipnr, bank);
+	return 0;
+
+notfound_id:
+	dev_info(&pdev->dev, "No chip found on bank %i\n", bank);
+	ctrl &= ~(JZ_NAND_CTRL_ENABLE_CHIP(bank - 1));
+	writel(ctrl, nand->base + JZ_REG_NAND_CTRL);
+	jz_gpio_set_function(gpio, JZ_GPIO_FUNC_NONE);
+	jz_nand_iounmap_resource(nand->bank_mem[bank - 1],
+				 nand->bank_base[bank - 1]);
+notfound_resource:
+	gpio_free(gpio);
+notfound_gpio:
+	return ret;
+}
+
 static int __devinit jz_nand_probe(struct platform_device *pdev)
 {
 	int ret;
@@ -295,6 +407,8 @@ static int __devinit jz_nand_probe(struct platform_device *pdev)
 	struct nand_chip *chip;
 	struct mtd_info *mtd;
 	struct jz_nand_platform_data *pdata = pdev->dev.platform_data;
+	size_t chipnr, bank_idx;
+	uint8_t nand_maf_id = 0, nand_dev_id = 0;
 
 	nand = kzalloc(sizeof(*nand), GFP_KERNEL);
 	if (!nand) {
@@ -305,10 +419,6 @@ static int __devinit jz_nand_probe(struct platform_device *pdev)
 	ret = jz_nand_ioremap_resource(pdev, "mmio", &nand->mem, &nand->base);
 	if (ret)
 		goto err_free;
-	ret = jz_nand_ioremap_resource(pdev, "bank", &nand->bank_mem,
-			&nand->bank_base);
-	if (ret)
-		goto err_iounmap_mmio;
 
 	if (pdata && gpio_is_valid(pdata->busy_gpio)) {
 		ret = gpio_request(pdata->busy_gpio, "NAND busy pin");
@@ -316,7 +426,7 @@ static int __devinit jz_nand_probe(struct platform_device *pdev)
 			dev_err(&pdev->dev,
 				"Failed to request busy gpio %d: %d\n",
 				pdata->busy_gpio, ret);
-			goto err_iounmap_mem;
+			goto err_iounmap_mmio;
 		}
 	}
 
@@ -339,22 +449,51 @@ static int __devinit jz_nand_probe(struct platform_device *pdev)
 
 	chip->chip_delay = 50;
 	chip->cmd_ctrl = jz_nand_cmd_ctrl;
+	chip->select_chip = jz_nand_select_chip;
 
 	if (pdata && gpio_is_valid(pdata->busy_gpio))
 		chip->dev_ready = jz_nand_dev_ready;
 
-	chip->IO_ADDR_R = nand->bank_base;
-	chip->IO_ADDR_W = nand->bank_base;
-
 	nand->pdata = pdata;
 	platform_set_drvdata(pdev, nand);
 
-	writel(JZ_NAND_CTRL_ENABLE_CHIP(0), nand->base + JZ_REG_NAND_CTRL);
-
-	ret = nand_scan_ident(mtd, 1, NULL);
-	if (ret) {
-		dev_err(&pdev->dev,  "Failed to scan nand\n");
-		goto err_gpio_free;
+	/* We are going to autodetect NAND chips in the banks specified in the
+	 * platform data. Although nand_scan_ident() can detect multiple chips,
+	 * it requires those chips to be numbered consecuitively, which is not
+	 * always the case for external memory banks. And a fixed chip-to-bank
+	 * mapping is not practical either, since for example Dingoo units
+	 * produced at different times have NAND chips in different banks.
+	 */
+	chipnr = 0;
+	for (bank_idx = 0; bank_idx < JZ_NAND_NUM_BANKS; bank_idx++) {
+		unsigned char bank;
+
+		/* If there is no platform data, look for NAND in bank 1,
+		 * which is the most likely bank since it is the only one
+		 * that can be booted from.
+		 */
+		bank = pdata ? pdata->banks[bank_idx] : bank_idx ^ 1;
+		if (bank == 0)
+			break;
+		if (bank > JZ_NAND_NUM_BANKS) {
+			dev_warn(&pdev->dev,
+				"Skipping non-existing bank: %d\n", bank);
+			continue;
+		}
+		/* The detection routine will directly or indirectly call
+		 * jz_nand_select_chip(), so nand->banks has to contain the
+		 * bank we're checking.
+		 */
+		nand->banks[chipnr] = bank;
+		if (jz_nand_detect_bank(pdev, nand, bank, chipnr,
+					&nand_maf_id, &nand_dev_id) == 0)
+			chipnr++;
+		else
+			nand->banks[chipnr] = 0;
+	}
+	if (chipnr == 0) {
+		dev_err(&pdev->dev, "No NAND chips found\n");
+		goto err_gpio_busy;
 	}
 
 	if (pdata && pdata->ident_callback) {
@@ -364,8 +503,8 @@ static int __devinit jz_nand_probe(struct platform_device *pdev)
 
 	ret = nand_scan_tail(mtd);
 	if (ret) {
-		dev_err(&pdev->dev,  "Failed to scan nand\n");
-		goto err_gpio_free;
+		dev_err(&pdev->dev,  "Failed to scan NAND\n");
+		goto err_unclaim_banks;
 	}
 
 	ret = mtd_device_parse_register(mtd, NULL, NULL,
@@ -382,14 +521,21 @@ static int __devinit jz_nand_probe(struct platform_device *pdev)
 	return 0;
 
 err_nand_release:
-	nand_release(&nand->mtd);
-err_gpio_free:
+	nand_release(mtd);
+err_unclaim_banks:
+	while (chipnr--) {
+		unsigned char bank = nand->banks[chipnr];
+		gpio_free(JZ_GPIO_MEM_CS0 + bank - 1);
+		jz_nand_iounmap_resource(nand->bank_mem[bank - 1],
+					 nand->bank_base[bank - 1]);
+	}
+	writel(0, nand->base + JZ_REG_NAND_CTRL);
+err_gpio_busy:
+	if (pdata && gpio_is_valid(pdata->busy_gpio))
+		gpio_free(pdata->busy_gpio);
 	platform_set_drvdata(pdev, NULL);
-	gpio_free(pdata->busy_gpio);
-err_iounmap_mem:
-	iounmap(nand->bank_base);
 err_iounmap_mmio:
-	iounmap(nand->base);
+	jz_nand_iounmap_resource(nand->mem, nand->base);
 err_free:
 	kfree(nand);
 	return ret;
@@ -398,16 +544,26 @@ err_free:
 static int __devexit jz_nand_remove(struct platform_device *pdev)
 {
 	struct jz_nand *nand = platform_get_drvdata(pdev);
+	struct jz_nand_platform_data *pdata = pdev->dev.platform_data;
+	size_t i;
 
 	nand_release(&nand->mtd);
 
 	/* Deassert and disable all chips */
 	writel(0, nand->base + JZ_REG_NAND_CTRL);
 
-	iounmap(nand->bank_base);
-	release_mem_region(nand->bank_mem->start, resource_size(nand->bank_mem));
-	iounmap(nand->base);
-	release_mem_region(nand->mem->start, resource_size(nand->mem));
+	for (i = 0; i < JZ_NAND_NUM_BANKS; ++i) {
+		unsigned char bank = nand->banks[i];
+		if (bank != 0) {
+			jz_nand_iounmap_resource(nand->bank_mem[bank - 1],
+						 nand->bank_base[bank - 1]);
+			gpio_free(JZ_GPIO_MEM_CS0 + bank - 1);
+		}
+	}
+	if (pdata && gpio_is_valid(pdata->busy_gpio))
+		gpio_free(pdata->busy_gpio);
+
+	jz_nand_iounmap_resource(nand->mem, nand->base);
 
 	platform_set_drvdata(pdev, NULL);
 	kfree(nand);