diff options
author | John Bowler <jbowler@acm.org> | 2006-02-28 16:59:08 -0800 |
---|---|---|
committer | Linus Torvalds <torvalds@g5.osdl.org> | 2006-02-28 20:53:43 -0800 |
commit | 9cff3372bf665652e9dd71c09b817c20f58f754a (patch) | |
tree | e2e19cac59e733870e4e334ef2e12854fd32f267 /drivers/mtd | |
parent | 50322fe7d46b544d5649edb58bdbe5c95dd44b98 (diff) | |
download | op-kernel-dev-9cff3372bf665652e9dd71c09b817c20f58f754a.zip op-kernel-dev-9cff3372bf665652e9dd71c09b817c20f58f754a.tar.gz |
[PATCH] drivers/mtd/redboot.c: recognise a foreign byte sex partition table
The RedBoot boot loader writes flash partition tables containing native
byte sex 32 bit values. When booting an opposite byte sex kernel (e.g. an
LE kernel from BE RedBoot) the current MTD driver fails to handle the
partition table and therefore is unable to generate the correct partition
map for the flash.
So far as I am aware this problem is ARM specific, because only ARM
supports software change of the CPU (memory system) byte sex, however the
partition table parsing is in generic MTD code. The patch below has been
tested on NSLU2 (an IXP4XX based system) with a patch,
10-ixp4xx-copy-from.patch (submitted to linux-arm-kernel - it's ARM
specific) required to make the maps/ixp4xx.c driver work with an LE kernel.
Builds of the patched system are in the 'unstable' release of OpenSlug and
UcSlugC available from www.nslu2-linux.org. These builds are BE, the
archives at www.nslu2-linux.org and www.handhelds.org (see
monotone.vanille.de) can be built LE (currently DISTRO targets
nslu-ltu.conf for LE thumb uclibc (32 bit kernel) and nslu2-lau.conf,
nslu2-lag.conf for LE arm uclibc/glibc) and this patch has been tested
extensively will both BE and LE systems on the NSLU2 (including swapping
between BE and LE by reflashing from both RedBoot and Linux).
The patch recognises that the FIS directory (the partition table) is
byte-reversed by examining the partition table size, which is known to be
one erase block (this is an assumption made elsewhere in redboot.c). If
the size matches the erase block after byte swapping the value then
byte-reversal is assumed, if not no further action is taken. The patched
code is fail safe; should redboot.c be changed to support a partition table
with a modified size field the test will fail and the partition table will
be assumed to have the host byte sex.
If byte-reversal is detected the patch byte swaps the remainder of the 32
bit fields in the copy of the table; this copy is then used to set up the
MTD partition map.
Signed-off-by: John Bowler <jbowler@acm.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Diffstat (limited to 'drivers/mtd')
-rw-r--r-- | drivers/mtd/redboot.c | 28 |
1 files changed, 27 insertions, 1 deletions
diff --git a/drivers/mtd/redboot.c b/drivers/mtd/redboot.c index 7b7ca5a..d01b6a9 100644 --- a/drivers/mtd/redboot.c +++ b/drivers/mtd/redboot.c @@ -89,8 +89,34 @@ static int parse_redboot_partitions(struct mtd_info *master, i = numslots; break; } - if (!memcmp(buf[i].name, "FIS directory", 14)) + if (!memcmp(buf[i].name, "FIS directory", 14)) { + /* This is apparently the FIS directory entry for the + * FIS directory itself. The FIS directory size is + * one erase block, if the buf[i].size field is + * swab32(erasesize) then we know we are looking at + * a byte swapped FIS directory - swap all the entries! + * (NOTE: this is 'size' not 'data_length', size is + * the full size of the entry.) + */ + if (swab32(buf[i].size) == master->erasesize) { + int j; + for (j = 0; j < numslots && buf[j].name[0] != 0xff; ++j) { + /* The unsigned long fields were written with the + * wrong byte sex, name and pad have no byte sex. + */ +# define do_swab32(x) (x) = swab32(x) + do_swab32(buf[j].flash_base); + do_swab32(buf[j].mem_base); + do_swab32(buf[j].size); + do_swab32(buf[j].entry_point); + do_swab32(buf[j].data_length); + do_swab32(buf[j].desc_cksum); + do_swab32(buf[j].file_cksum); +# undef do_swab32 + } + } break; + } } if (i == numslots) { /* Didn't find it */ |