Merge tag 'for-linus-20160523' of git://git.infradead.org/linux-mtd

Pull MTD updates from Brian Norris:
 "First cycle with Boris as NAND maintainer! Many (most) bullets stolen
  from him.

  Generic:
   - Migrated NAND LED trigger to be a generic MTD trigger

  NAND:
   - Introduction of the "ECC algorithm" concept, to avoid overloading
     the ECC mode field too much more
   - Replaced the nand_ecclayout infrastructure with something a little
     more flexible (finally!) and future proof
   - Rework of the OMAP GPMC and NAND drivers; the TI folks pulled some
     of this into their own tree as well
   - Prepare the sunxi NAND driver to receive DMA support
   - Handle bitflips in erased pages on GPMI revisions that do not
     support this in hardware.

  SPI NOR:
   - Start using the spi_flash_read() API for SPI drivers that support
     it (i.e., SPI drivers with special memory-mapped flash modes)

  And other small scattered improvments"

* tag 'for-linus-20160523' of git://git.infradead.org/linux-mtd: (155 commits)
  mtd: spi-nor: support GigaDevice gd25lq64c
  mtd: nand_bch: fix spelling of "probably"
  mtd: brcmnand: respect ECC algorithm set by NAND subsystem
  gpmi-nand: Handle ECC Errors in erased pages
  Documentation: devicetree: deprecate "soft_bch" nand-ecc-mode value
  mtd: nand: add support for "nand-ecc-algo" DT property
  mtd: mtd: drop NAND_ECC_SOFT_BCH enum value
  mtd: drop support for NAND_ECC_SOFT_BCH as "soft_bch" mapping
  mtd: nand: read ECC algorithm from the new field
  mtd: nand: fsmc: validate ECC setup by checking algorithm directly
  mtd: nand: set ECC algorithm to Hamming on fallback
  staging: mt29f_spinand: set ECC algorithm explicitly
  CRIS v32: nand: set ECC algorithm explicitly
  mtd: nand: atmel: set ECC algorithm explicitly
  mtd: nand: davinci: set ECC algorithm explicitly
  mtd: nand: bf5xx: set ECC algorithm explicitly
  mtd: nand: omap2: Fix high memory dma prefetch transfer
  mtd: nand: omap2: Start dma request before enabling prefetch
  mtd: nandsim: add __init attribute
  mtd: nand: move of_get_nand_xxx() helpers into nand_base.c
  ...

42 files changed, 2680 insertions, 1994 deletions

diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c
index 68b58c8..78e12cc 100644
--- a/drivers/mtd/nand/ams-delta.c
+++ b/drivers/mtd/nand/ams-delta.c
@@ -224,6 +224,7 @@ static int ams_delta_init(struct platform_device *pdev)
 	/* 25 us command delay time */
 	this->chip_delay = 30;
 	this->ecc.mode = NAND_ECC_SOFT;
+	this->ecc.algo = NAND_ECC_HAMMING;
 
 	platform_set_drvdata(pdev, io_base);
 
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 20cbaab..efc8ea2 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -36,7 +36,6 @@
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/of_gpio.h>
-#include <linux/of_mtd.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
@@ -72,30 +71,44 @@ struct atmel_nand_nfc_caps {
 	uint32_t rb_mask;
 };
 
-/* oob layout for large page size
+/*
+ * oob layout for large page size
  * bad block info is on bytes 0 and 1
  * the bytes have to be consecutives to avoid
  * several NAND_CMD_RNDOUT during read
- */
-static struct nand_ecclayout atmel_oobinfo_large = {
-	.eccbytes = 4,
-	.eccpos = {60, 61, 62, 63},
-	.oobfree = {
-		{2, 58}
-	},
-};
-
-/* oob layout for small page size
+ *
+ * oob layout for small page size
  * bad block info is on bytes 4 and 5
  * the bytes have to be consecutives to avoid
  * several NAND_CMD_RNDOUT during read
  */
-static struct nand_ecclayout atmel_oobinfo_small = {
-	.eccbytes = 4,
-	.eccpos = {0, 1, 2, 3},
-	.oobfree = {
-		{6, 10}
-	},
+static int atmel_ooblayout_ecc_sp(struct mtd_info *mtd, int section,
+				  struct mtd_oob_region *oobregion)
+{
+	if (section)
+		return -ERANGE;
+
+	oobregion->length = 4;
+	oobregion->offset = 0;
+
+	return 0;
+}
+
+static int atmel_ooblayout_free_sp(struct mtd_info *mtd, int section,
+				   struct mtd_oob_region *oobregion)
+{
+	if (section)
+		return -ERANGE;
+
+	oobregion->offset = 6;
+	oobregion->length = mtd->oobsize - oobregion->offset;
+
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops atmel_ooblayout_sp_ops = {
+	.ecc = atmel_ooblayout_ecc_sp,
+	.free = atmel_ooblayout_free_sp,
 };
 
 struct atmel_nfc {
@@ -163,8 +176,6 @@ struct atmel_nand_host {
 	int			*pmecc_delta;
 };
 
-static struct nand_ecclayout atmel_pmecc_oobinfo;
-
 /*
  * Enable NAND.
  */
@@ -434,14 +445,13 @@ err_buf:
 static void atmel_read_buf(struct mtd_info *mtd, u8 *buf, int len)
 {
 	struct nand_chip *chip = mtd_to_nand(mtd);
-	struct atmel_nand_host *host = nand_get_controller_data(chip);
 
 	if (use_dma && len > mtd->oobsize)
 		/* only use DMA for bigger than oob size: better performances */
 		if (atmel_nand_dma_op(mtd, buf, len, 1) == 0)
 			return;
 
-	if (host->board.bus_width_16)
+	if (chip->options & NAND_BUSWIDTH_16)
 		atmel_read_buf16(mtd, buf, len);
 	else
 		atmel_read_buf8(mtd, buf, len);
@@ -450,14 +460,13 @@ static void atmel_read_buf(struct mtd_info *mtd, u8 *buf, int len)
 static void atmel_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
 {
 	struct nand_chip *chip = mtd_to_nand(mtd);
-	struct atmel_nand_host *host = nand_get_controller_data(chip);
 
 	if (use_dma && len > mtd->oobsize)
 		/* only use DMA for bigger than oob size: better performances */
 		if (atmel_nand_dma_op(mtd, (void *)buf, len, 0) == 0)
 			return;
 
-	if (host->board.bus_width_16)
+	if (chip->options & NAND_BUSWIDTH_16)
 		atmel_write_buf16(mtd, buf, len);
 	else
 		atmel_write_buf8(mtd, buf, len);
@@ -483,22 +492,6 @@ static int pmecc_get_ecc_bytes(int cap, int sector_size)
 	return (m * cap + 7) / 8;
 }
 
-static void pmecc_config_ecc_layout(struct nand_ecclayout *layout,
-				    int oobsize, int ecc_len)
-{
-	int i;
-
-	layout->eccbytes = ecc_len;
-
-	/* ECC will occupy the last ecc_len bytes continuously */
-	for (i = 0; i < ecc_len; i++)
-		layout->eccpos[i] = oobsize - ecc_len + i;
-
-	layout->oobfree[0].offset = PMECC_OOB_RESERVED_BYTES;
-	layout->oobfree[0].length =
-		oobsize - ecc_len - layout->oobfree[0].offset;
-}
-
 static void __iomem *pmecc_get_alpha_to(struct atmel_nand_host *host)
 {
 	int table_size;
@@ -836,13 +829,16 @@ static void pmecc_correct_data(struct mtd_info *mtd, uint8_t *buf, uint8_t *ecc,
 			dev_dbg(host->dev, "Bit flip in data area, byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
 				pos, bit_pos, err_byte, *(buf + byte_pos));
 		} else {
+			struct mtd_oob_region oobregion;
+
 			/* Bit flip in OOB area */
 			tmp = sector_num * nand_chip->ecc.bytes
 					+ (byte_pos - sector_size);
 			err_byte = ecc[tmp];
 			ecc[tmp] ^= (1 << bit_pos);
 
-			pos = tmp + nand_chip->ecc.layout->eccpos[0];
+			mtd_ooblayout_ecc(mtd, 0, &oobregion);
+			pos = tmp + oobregion.offset;
 			dev_dbg(host->dev, "Bit flip in OOB, oob_byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
 				pos, bit_pos, err_byte, ecc[tmp]);
 		}
@@ -863,17 +859,6 @@ static int pmecc_correction(struct mtd_info *mtd, u32 pmecc_stat, uint8_t *buf,
 	uint8_t *buf_pos;
 	int max_bitflips = 0;
 
-	/* If can correct bitfilps from erased page, do the normal check */
-	if (host->caps->pmecc_correct_erase_page)
-		goto normal_check;
-
-	for (i = 0; i < nand_chip->ecc.total; i++)
-		if (ecc[i] != 0xff)
-			goto normal_check;
-	/* Erased page, return OK */
-	return 0;
-
-normal_check:
 	for (i = 0; i < nand_chip->ecc.steps; i++) {
 		err_nbr = 0;
 		if (pmecc_stat & 0x1) {
@@ -884,16 +869,30 @@ normal_check:
 			pmecc_get_sigma(mtd);
 
 			err_nbr = pmecc_err_location(mtd);
-			if (err_nbr == -1) {
+			if (err_nbr >= 0) {
+				pmecc_correct_data(mtd, buf_pos, ecc, i,
+						   nand_chip->ecc.bytes,
+						   err_nbr);
+			} else if (!host->caps->pmecc_correct_erase_page) {
+				u8 *ecc_pos = ecc + (i * nand_chip->ecc.bytes);
+
+				/* Try to detect erased pages */
+				err_nbr = nand_check_erased_ecc_chunk(buf_pos,
+							host->pmecc_sector_size,
+							ecc_pos,
+							nand_chip->ecc.bytes,
+							NULL, 0,
+							nand_chip->ecc.strength);
+			}
+
+			if (err_nbr < 0) {
 				dev_err(host->dev, "PMECC: Too many errors\n");
 				mtd->ecc_stats.failed++;
 				return -EIO;
-			} else {
-				pmecc_correct_data(mtd, buf_pos, ecc, i,
-					nand_chip->ecc.bytes, err_nbr);
-				mtd->ecc_stats.corrected += err_nbr;
-				max_bitflips = max_t(int, max_bitflips, err_nbr);
 			}
+
+			mtd->ecc_stats.corrected += err_nbr;
+			max_bitflips = max_t(int, max_bitflips, err_nbr);
 		}
 		pmecc_stat >>= 1;
 	}
@@ -931,7 +930,6 @@ static int atmel_nand_pmecc_read_page(struct mtd_info *mtd,
 	struct atmel_nand_host *host = nand_get_controller_data(chip);
 	int eccsize = chip->ecc.size * chip->ecc.steps;
 	uint8_t *oob = chip->oob_poi;
-	uint32_t *eccpos = chip->ecc.layout->eccpos;
 	uint32_t stat;
 	unsigned long end_time;
 	int bitflips = 0;
@@ -953,7 +951,11 @@ static int atmel_nand_pmecc_read_page(struct mtd_info *mtd,
 
 	stat = pmecc_readl_relaxed(host->ecc, ISR);
 	if (stat != 0) {
-		bitflips = pmecc_correction(mtd, stat, buf, &oob[eccpos[0]]);
+		struct mtd_oob_region oobregion;
+
+		mtd_ooblayout_ecc(mtd, 0, &oobregion);
+		bitflips = pmecc_correction(mtd, stat, buf,
+					    &oob[oobregion.offset]);
 		if (bitflips < 0)
 			/* uncorrectable errors */
 			return 0;
@@ -967,8 +969,8 @@ static int atmel_nand_pmecc_write_page(struct mtd_info *mtd,
 		int page)
 {
 	struct atmel_nand_host *host = nand_get_controller_data(chip);
-	uint32_t *eccpos = chip->ecc.layout->eccpos;
-	int i, j;
+	struct mtd_oob_region oobregion = { };
+	int i, j, section = 0;
 	unsigned long end_time;
 
 	if (!host->nfc || !host->nfc->write_by_sram) {
@@ -987,11 +989,14 @@ static int atmel_nand_pmecc_write_page(struct mtd_info *mtd,
 
 	for (i = 0; i < chip->ecc.steps; i++) {
 		for (j = 0; j < chip->ecc.bytes; j++) {
-			int pos;
+			if (!oobregion.length)
+				mtd_ooblayout_ecc(mtd, section, &oobregion);
 
-			pos = i * chip->ecc.bytes + j;
-			chip->oob_poi[eccpos[pos]] =
+			chip->oob_poi[oobregion.offset] =
 				pmecc_readb_ecc_relaxed(host->ecc, i, j);
+			oobregion.length--;
+			oobregion.offset++;
+			section++;
 		}
 	}
 	chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
@@ -1003,8 +1008,9 @@ static void atmel_pmecc_core_init(struct mtd_info *mtd)
 {
 	struct nand_chip *nand_chip = mtd_to_nand(mtd);
 	struct atmel_nand_host *host = nand_get_controller_data(nand_chip);
+	int eccbytes = mtd_ooblayout_count_eccbytes(mtd);
 	uint32_t val = 0;
-	struct nand_ecclayout *ecc_layout;
+	struct mtd_oob_region oobregion;
 
 	pmecc_writel(host->ecc, CTRL, PMECC_CTRL_RST);
 	pmecc_writel(host->ecc, CTRL, PMECC_CTRL_DISABLE);
@@ -1054,11 +1060,11 @@ static void atmel_pmecc_core_init(struct mtd_info *mtd)
 		| PMECC_CFG_AUTO_DISABLE);
 	pmecc_writel(host->ecc, CFG, val);
 
-	ecc_layout = nand_chip->ecc.layout;
 	pmecc_writel(host->ecc, SAREA, mtd->oobsize - 1);
-	pmecc_writel(host->ecc, SADDR, ecc_layout->eccpos[0]);
+	mtd_ooblayout_ecc(mtd, 0, &oobregion);
+	pmecc_writel(host->ecc, SADDR, oobregion.offset);
 	pmecc_writel(host->ecc, EADDR,
-			ecc_layout->eccpos[ecc_layout->eccbytes - 1]);
+		     oobregion.offset + eccbytes - 1);
 	/* See datasheet about PMECC Clock Control Register */
 	pmecc_writel(host->ecc, CLK, 2);
 	pmecc_writel(host->ecc, IDR, 0xff);
@@ -1206,6 +1212,7 @@ static int atmel_pmecc_nand_init_params(struct platform_device *pdev,
 		dev_warn(host->dev,
 			"Can't get I/O resource regs for PMECC controller, rolling back on software ECC\n");
 		nand_chip->ecc.mode = NAND_ECC_SOFT;
+		nand_chip->ecc.algo = NAND_ECC_HAMMING;
 		return 0;
 	}
 
@@ -1280,11 +1287,8 @@ static int atmel_pmecc_nand_init_params(struct platform_device *pdev,
 			err_no = -EINVAL;
 			goto err;
 		}
-		pmecc_config_ecc_layout(&atmel_pmecc_oobinfo,
-					mtd->oobsize,
-					nand_chip->ecc.total);
 
-		nand_chip->ecc.layout = &atmel_pmecc_oobinfo;
+		mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
 		break;
 	default:
 		dev_warn(host->dev,
@@ -1292,6 +1296,7 @@ static int atmel_pmecc_nand_init_params(struct platform_device *pdev,
 		/* page size not handled by HW ECC */
 		/* switching back to soft ECC */
 		nand_chip->ecc.mode = NAND_ECC_SOFT;
+		nand_chip->ecc.algo = NAND_ECC_HAMMING;
 		return 0;
 	}
 
@@ -1359,12 +1364,12 @@ static int atmel_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip,
 {
 	int eccsize = chip->ecc.size;
 	int eccbytes = chip->ecc.bytes;
-	uint32_t *eccpos = chip->ecc.layout->eccpos;
 	uint8_t *p = buf;
 	uint8_t *oob = chip->oob_poi;
 	uint8_t *ecc_pos;
 	int stat;
 	unsigned int max_bitflips = 0;
+	struct mtd_oob_region oobregion = {};
 
 	/*
 	 * Errata: ALE is incorrectly wired up to the ECC controller
@@ -1382,19 +1387,20 @@ static int atmel_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip,
 	chip->read_buf(mtd, p, eccsize);
 
 	/* move to ECC position if needed */
-	if (eccpos[0] != 0) {
-		/* This only works on large pages
-		 * because the ECC controller waits for
-		 * NAND_CMD_RNDOUTSTART after the
-		 * NAND_CMD_RNDOUT.
-		 * anyway, for small pages, the eccpos[0] == 0
+	mtd_ooblayout_ecc(mtd, 0, &oobregion);
+	if (oobregion.offset != 0) {
+		/*
+		 * This only works on large pages because the ECC controller
+		 * waits for NAND_CMD_RNDOUTSTART after the NAND_CMD_RNDOUT.
+		 * Anyway, for small pages, the first ECC byte is at offset
+		 * 0 in the OOB area.
 		 */
 		chip->cmdfunc(mtd, NAND_CMD_RNDOUT,
-				mtd->writesize + eccpos[0], -1);
+			      mtd->writesize + oobregion.offset, -1);
 	}
 
 	/* the ECC controller needs to read the ECC just after the data */
-	ecc_pos = oob + eccpos[0];
+	ecc_pos = oob + oobregion.offset;
 	chip->read_buf(mtd, ecc_pos, eccbytes);
 
 	/* check if there's an error */
@@ -1504,58 +1510,17 @@ static void atmel_nand_hwctl(struct mtd_info *mtd, int mode)
 		ecc_writel(host->ecc, CR, ATMEL_ECC_RST);
 }
 
-static int atmel_of_init_port(struct atmel_nand_host *host,
-			      struct device_node *np)
+static int atmel_of_init_ecc(struct atmel_nand_host *host,
+			     struct device_node *np)
 {
-	u32 val;
 	u32 offset[2];
-	int ecc_mode;
-	struct atmel_nand_data *board = &host->board;
-	enum of_gpio_flags flags = 0;
-
-	host->caps = (struct atmel_nand_caps *)
-		of_device_get_match_data(host->dev);
-
-	if (of_property_read_u32(np, "atmel,nand-addr-offset", &val) == 0) {
-		if (val >= 32) {
-			dev_err(host->dev, "invalid addr-offset %u\n", val);
-			return -EINVAL;
-		}
-		board->ale = val;
-	}
-
-	if (of_property_read_u32(np, "atmel,nand-cmd-offset", &val) == 0) {
-		if (val >= 32) {
-			dev_err(host->dev, "invalid cmd-offset %u\n", val);
-			return -EINVAL;
-		}
-		board->cle = val;
-	}
-
-	ecc_mode = of_get_nand_ecc_mode(np);
-
-	board->ecc_mode = ecc_mode < 0 ? NAND_ECC_SOFT : ecc_mode;
-
-	board->on_flash_bbt = of_get_nand_on_flash_bbt(np);
-
-	board->has_dma = of_property_read_bool(np, "atmel,nand-has-dma");
-
-	if (of_get_nand_bus_width(np) == 16)
-		board->bus_width_16 = 1;
-
-	board->rdy_pin = of_get_gpio_flags(np, 0, &flags);
-	board->rdy_pin_active_low = (flags == OF_GPIO_ACTIVE_LOW);
-
-	board->enable_pin = of_get_gpio(np, 1);
-	board->det_pin = of_get_gpio(np, 2);
+	u32 val;
 
 	host->has_pmecc = of_property_read_bool(np, "atmel,has-pmecc");
 
-	/* load the nfc driver if there is */
-	of_platform_populate(np, NULL, NULL, host->dev);
-
-	if (!(board->ecc_mode == NAND_ECC_HW) || !host->has_pmecc)
-		return 0;	/* Not using PMECC */
+	/* Not using PMECC */
+	if (!(host->nand_chip.ecc.mode == NAND_ECC_HW) || !host->has_pmecc)
+		return 0;
 
 	/* use PMECC, get correction capability, sector size and lookup
 	 * table offset.
@@ -1596,16 +1561,65 @@ static int atmel_of_init_port(struct atmel_nand_host *host,
 		/* Will build a lookup table and initialize the offset later */
 		return 0;
 	}
+
 	if (!offset[0] && !offset[1]) {
 		dev_err(host->dev, "Invalid PMECC lookup table offset\n");
 		return -EINVAL;
 	}
+
 	host->pmecc_lookup_table_offset_512 = offset[0];
 	host->pmecc_lookup_table_offset_1024 = offset[1];
 
 	return 0;
 }
 
+static int atmel_of_init_port(struct atmel_nand_host *host,
+			      struct device_node *np)
+{
+	u32 val;
+	struct atmel_nand_data *board = &host->board;
+	enum of_gpio_flags flags = 0;
+
+	host->caps = (struct atmel_nand_caps *)
+		of_device_get_match_data(host->dev);
+
+	if (of_property_read_u32(np, "atmel,nand-addr-offset", &val) == 0) {
+		if (val >= 32) {
+			dev_err(host->dev, "invalid addr-offset %u\n", val);
+			return -EINVAL;
+		}
+		board->ale = val;
+	}
+
+	if (of_property_read_u32(np, "atmel,nand-cmd-offset", &val) == 0) {
+		if (val >= 32) {
+			dev_err(host->dev, "invalid cmd-offset %u\n", val);
+			return -EINVAL;
+		}
+		board->cle = val;
+	}
+
+	board->has_dma = of_property_read_bool(np, "atmel,nand-has-dma");
+
+	board->rdy_pin = of_get_gpio_flags(np, 0, &flags);
+	board->rdy_pin_active_low = (flags == OF_GPIO_ACTIVE_LOW);
+
+	board->enable_pin = of_get_gpio(np, 1);
+	board->det_pin = of_get_gpio(np, 2);
+
+	/* load the nfc driver if there is */
+	of_platform_populate(np, NULL, NULL, host->dev);
+
+	/*
+	 * Initialize ECC mode to NAND_ECC_SOFT so that we have a correct value
+	 * even if the nand-ecc-mode property is not defined.
+	 */
+	host->nand_chip.ecc.mode = NAND_ECC_SOFT;
+	host->nand_chip.ecc.algo = NAND_ECC_HAMMING;
+
+	return 0;
+}
+
 static int atmel_hw_nand_init_params(struct platform_device *pdev,
 					 struct atmel_nand_host *host)
 {
@@ -1618,6 +1632,7 @@ static int atmel_hw_nand_init_params(struct platform_device *pdev,
 		dev_err(host->dev,
 			"Can't get I/O resource regs, use software ECC\n");
 		nand_chip->ecc.mode = NAND_ECC_SOFT;
+		nand_chip->ecc.algo = NAND_ECC_HAMMING;
 		return 0;
 	}
 
@@ -1631,25 +1646,26 @@ static int atmel_hw_nand_init_params(struct platform_device *pdev,
 	/* set ECC page size and oob layout */
 	switch (mtd->writesize) {
 	case 512:
-		nand_chip->ecc.layout = &atmel_oobinfo_small;
+		mtd_set_ooblayout(mtd, &atmel_ooblayout_sp_ops);
 		ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_528);
 		break;
 	case 1024:
-		nand_chip->ecc.layout = &atmel_oobinfo_large;
+		mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
 		ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_1056);
 		break;
 	case 2048:
-		nand_chip->ecc.layout = &atmel_oobinfo_large;
+		mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
 		ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_2112);
 		break;
 	case 4096:
-		nand_chip->ecc.layout = &atmel_oobinfo_large;
+		mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
 		ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_4224);
 		break;
 	default:
 		/* page size not handled by HW ECC */
 		/* switching back to soft ECC */
 		nand_chip->ecc.mode = NAND_ECC_SOFT;
+		nand_chip->ecc.algo = NAND_ECC_HAMMING;
 		return 0;
 	}
 
@@ -2147,6 +2163,19 @@ static int atmel_nand_probe(struct platform_device *pdev)
 	} else {
 		memcpy(&host->board, dev_get_platdata(&pdev->dev),
 		       sizeof(struct atmel_nand_data));
+		nand_chip->ecc.mode = host->board.ecc_mode;
+
+		/*
+		 * When using software ECC every supported avr32 board means
+		 * Hamming algorithm. If that ever changes we'll need to add
+		 * ecc_algo field to the struct atmel_nand_data.
+		 */
+		if (nand_chip->ecc.mode == NAND_ECC_SOFT)
+			nand_chip->ecc.algo = NAND_ECC_HAMMING;
+
+		/* 16-bit bus width */
+		if (host->board.bus_width_16)
+			nand_chip->options |= NAND_BUSWIDTH_16;
 	}
 
 	 /* link the private data structures */
@@ -2188,11 +2217,8 @@ static int atmel_nand_probe(struct platform_device *pdev)
 		nand_chip->cmd_ctrl = atmel_nand_cmd_ctrl;
 	}
 
-	nand_chip->ecc.mode = host->board.ecc_mode;
 	nand_chip->chip_delay = 40;		/* 40us command delay time */
 
-	if (host->board.bus_width_16)	/* 16-bit bus width */
-		nand_chip->options |= NAND_BUSWIDTH_16;
 
 	nand_chip->read_buf = atmel_read_buf;
 	nand_chip->write_buf = atmel_write_buf;
@@ -2225,11 +2251,6 @@ static int atmel_nand_probe(struct platform_device *pdev)
 		}
 	}
 
-	if (host->board.on_flash_bbt || on_flash_bbt) {
-		dev_info(&pdev->dev, "Use On Flash BBT\n");
-		nand_chip->bbt_options |= NAND_BBT_USE_FLASH;
-	}
-
 	if (!host->board.has_dma)
 		use_dma = 0;
 
@@ -2256,6 +2277,18 @@ static int atmel_nand_probe(struct platform_device *pdev)
 		goto err_scan_ident;
 	}
 
+	if (host->board.on_flash_bbt || on_flash_bbt)
+		nand_chip->bbt_options |= NAND_BBT_USE_FLASH;
+
+	if (nand_chip->bbt_options & NAND_BBT_USE_FLASH)
+		dev_info(&pdev->dev, "Use On Flash BBT\n");
+
+	if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node) {
+		res = atmel_of_init_ecc(host, pdev->dev.of_node);
+		if (res)
+			goto err_hw_ecc;
+	}
+
 	if (nand_chip->ecc.mode == NAND_ECC_HW) {
 		if (host->has_pmecc)
 			res = atmel_pmecc_nand_init_params(pdev, host);
diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c
index 341ea49..9bf6d99 100644
--- a/drivers/mtd/nand/au1550nd.c
+++ b/drivers/mtd/nand/au1550nd.c
@@ -459,6 +459,7 @@ static int au1550nd_probe(struct platform_device *pdev)
 	/* 30 us command delay time */
 	this->chip_delay = 30;
 	this->ecc.mode = NAND_ECC_SOFT;
+	this->ecc.algo = NAND_ECC_HAMMING;
 
 	if (pd->devwidth)
 		this->options |= NAND_BUSWIDTH_16;
diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c
index 7f6b30e..37da423 100644
--- a/drivers/mtd/nand/bf5xx_nand.c
+++ b/drivers/mtd/nand/bf5xx_nand.c
@@ -109,28 +109,33 @@ static const unsigned short bfin_nfc_pin_req[] =
 	 0};
 
 #ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC
-static struct nand_ecclayout bootrom_ecclayout = {
-	.eccbytes = 24,
-	.eccpos = {
-		0x8 * 0, 0x8 * 0 + 1, 0x8 * 0 + 2,
-		0x8 * 1, 0x8 * 1 + 1, 0x8 * 1 + 2,
-		0x8 * 2, 0x8 * 2 + 1, 0x8 * 2 + 2,
-		0x8 * 3, 0x8 * 3 + 1, 0x8 * 3 + 2,
-		0x8 * 4, 0x8 * 4 + 1, 0x8 * 4 + 2,
-		0x8 * 5, 0x8 * 5 + 1, 0x8 * 5 + 2,
-		0x8 * 6, 0x8 * 6 + 1, 0x8 * 6 + 2,
-		0x8 * 7, 0x8 * 7 + 1, 0x8 * 7 + 2
-	},
-	.oobfree = {
-		{ 0x8 * 0 + 3, 5 },
-		{ 0x8 * 1 + 3, 5 },
-		{ 0x8 * 2 + 3, 5 },
-		{ 0x8 * 3 + 3, 5 },
-		{ 0x8 * 4 + 3, 5 },
-		{ 0x8 * 5 + 3, 5 },
-		{ 0x8 * 6 + 3, 5 },
-		{ 0x8 * 7 + 3, 5 },
-	}
+static int bootrom_ooblayout_ecc(struct mtd_info *mtd, int section,
+				 struct mtd_oob_region *oobregion)
+{
+	if (section > 7)
+		return -ERANGE;
+
+	oobregion->offset = section * 8;
+	oobregion->length = 3;
+
+	return 0;
+}
+
+static int bootrom_ooblayout_free(struct mtd_info *mtd, int section,
+				  struct mtd_oob_region *oobregion)
+{
+	if (section > 7)
+		return -ERANGE;
+
+	oobregion->offset = (section * 8) + 3;
+	oobregion->length = 5;
+
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops bootrom_ooblayout_ops = {
+	.ecc = bootrom_ooblayout_ecc,
+	.free = bootrom_ooblayout_free,
 };
 #endif
 
@@ -800,7 +805,7 @@ static int bf5xx_nand_probe(struct platform_device *pdev)
 	/* setup hardware ECC data struct */
 	if (hardware_ecc) {
 #ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC
-		chip->ecc.layout = &bootrom_ecclayout;
+		mtd_set_ooblayout(mtd, &bootrom_ooblayout_ops);
 #endif
 		chip->read_buf      = bf5xx_nand_dma_read_buf;
 		chip->write_buf     = bf5xx_nand_dma_write_buf;
@@ -812,6 +817,7 @@ static int bf5xx_nand_probe(struct platform_device *pdev)
 		chip->ecc.write_page_raw = bf5xx_nand_write_page_raw;
 	} else {
 		chip->ecc.mode	    = NAND_ECC_SOFT;
+		chip->ecc.algo	= NAND_ECC_HAMMING;
 	}
 
 	/* scan hardware nand chip and setup mtd info data struct */
diff --git a/drivers/mtd/nand/brcmnand/brcmnand.c b/drivers/mtd/nand/brcmnand/brcmnand.c
index e052839..b76ad7c 100644
--- a/drivers/mtd/nand/brcmnand/brcmnand.c
+++ b/drivers/mtd/nand/brcmnand/brcmnand.c
@@ -32,7 +32,6 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/of.h>
-#include <linux/of_mtd.h>
 #include <linux/of_platform.h>
 #include <linux/slab.h>
 #include <linux/list.h>
@@ -601,7 +600,7 @@ static void brcmnand_wr_corr_thresh(struct brcmnand_host *host, u8 val)
 
 static inline int brcmnand_cmd_shift(struct brcmnand_controller *ctrl)
 {
-	if (ctrl->nand_version < 0x0700)
+	if (ctrl->nand_version < 0x0602)
 		return 24;
 	return 0;
 }
@@ -781,127 +780,183 @@ static inline bool is_hamming_ecc(struct brcmnand_cfg *cfg)
 }
 
 /*
- * Returns a nand_ecclayout strucutre for the given layout/configuration.
- * Returns NULL on failure.
+ * Set mtd->ooblayout to the appropriate mtd_ooblayout_ops given
+ * the layout/configuration.
+ * Returns -ERRCODE on failure.
  */
-static struct nand_ecclayout *brcmnand_create_layout(int ecc_level,
-						     struct brcmnand_host *host)
+static int brcmnand_hamming_ooblayout_ecc(struct mtd_info *mtd, int section,
+					  struct mtd_oob_region *oobregion)
 {
+	struct nand_chip *chip = mtd_to_nand(mtd);
+	struct brcmnand_host *host = nand_get_controller_data(chip);
 	struct brcmnand_cfg *cfg = &host->hwcfg;
-	int i, j;
-	struct nand_ecclayout *layout;
-	int req;
-	int sectors;
-	int sas;
-	int idx1, idx2;
-
-	layout = devm_kzalloc(&host->pdev->dev, sizeof(*layout), GFP_KERNEL);
-	if (!layout)
-		return NULL;
-
-	sectors = cfg->page_size / (512 << cfg->sector_size_1k);
-	sas = cfg->spare_area_size << cfg->sector_size_1k;
-
-	/* Hamming */
-	if (is_hamming_ecc(cfg)) {
-		for (i = 0, idx1 = 0, idx2 = 0; i < sectors; i++) {
-			/* First sector of each page may have BBI */
-			if (i == 0) {
-				layout->oobfree[idx2].offset = i * sas + 1;
-				/* Small-page NAND use byte 6 for BBI */
-				if (cfg->page_size == 512)
-					layout->oobfree[idx2].offset--;
-				layout->oobfree[idx2].length = 5;
-			} else {
-				layout->oobfree[idx2].offset = i * sas;
-				layout->oobfree[idx2].length = 6;
-			}
-			idx2++;
-			layout->eccpos[idx1++] = i * sas + 6;
-			layout->eccpos[idx1++] = i * sas + 7;
-			layout->eccpos[idx1++] = i * sas + 8;
-			layout->oobfree[idx2].offset = i * sas + 9;
-			layout->oobfree[idx2].length = 7;
-			idx2++;
-			/* Leave zero-terminated entry for OOBFREE */
-			if (idx1 >= MTD_MAX_ECCPOS_ENTRIES_LARGE ||
-				    idx2 >= MTD_MAX_OOBFREE_ENTRIES_LARGE - 1)
-				break;
-		}
+	int sas = cfg->spare_area_size << cfg->sector_size_1k;
+	int sectors = cfg->page_size / (512 << cfg->sector_size_1k);
 
-		return layout;
-	}
+	if (section >= sectors)
+		return -ERANGE;
 
-	/*
-	 * CONTROLLER_VERSION:
-	 *   < v5.0: ECC_REQ = ceil(BCH_T * 13/8)
-	 *  >= v5.0: ECC_REQ = ceil(BCH_T * 14/8)
-	 * But we will just be conservative.
-	 */
-	req = DIV_ROUND_UP(ecc_level * 14, 8);
-	if (req >= sas) {
-		dev_err(&host->pdev->dev,
-			"error: ECC too large for OOB (ECC bytes %d, spare sector %d)\n",
-			req, sas);
-		return NULL;
-	}
+	oobregion->offset = (section * sas) + 6;
+	oobregion->length = 3;
+
+	return 0;
+}
+
+static int brcmnand_hamming_ooblayout_free(struct mtd_info *mtd, int section,
+					   struct mtd_oob_region *oobregion)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
+	struct brcmnand_host *host = nand_get_controller_data(chip);
+	struct brcmnand_cfg *cfg = &host->hwcfg;
+	int sas = cfg->spare_area_size << cfg->sector_size_1k;
+	int sectors = cfg->page_size / (512 << cfg->sector_size_1k);
 
-	layout->eccbytes = req * sectors;
-	for (i = 0, idx1 = 0, idx2 = 0; i < sectors; i++) {
-		for (j = sas - req; j < sas && idx1 <
-				MTD_MAX_ECCPOS_ENTRIES_LARGE; j++, idx1++)
-			layout->eccpos[idx1] = i * sas + j;
+	if (section >= sectors * 2)
+		return -ERANGE;
+
+	oobregion->offset = (section / 2) * sas;
+
+	if (section & 1) {
+		oobregion->offset += 9;
+		oobregion->length = 7;
+	} else {
+		oobregion->length = 6;
 
 		/* First sector of each page may have BBI */
-		if (i == 0) {
-			if (cfg->page_size == 512 && (sas - req >= 6)) {
-				/* Small-page NAND use byte 6 for BBI */
-				layout->oobfree[idx2].offset = 0;
-				layout->oobfree[idx2].length = 5;
-				idx2++;
-				if (sas - req > 6) {
-					layout->oobfree[idx2].offset = 6;
-					layout->oobfree[idx2].length =
-						sas - req - 6;
-					idx2++;
-				}
-			} else if (sas > req + 1) {
-				layout->oobfree[idx2].offset = i * sas + 1;
-				layout->oobfree[idx2].length = sas - req - 1;
-				idx2++;
-			}
-		} else if (sas > req) {
-			layout->oobfree[idx2].offset = i * sas;
-			layout->oobfree[idx2].length = sas - req;
-			idx2++;
+		if (!section) {
+			/*
+			 * Small-page NAND use byte 6 for BBI while large-page
+			 * NAND use byte 0.
+			 */
+			if (cfg->page_size > 512)
+				oobregion->offset++;
+			oobregion->length--;
 		}
-		/* Leave zero-terminated entry for OOBFREE */
-		if (idx1 >= MTD_MAX_ECCPOS_ENTRIES_LARGE ||
-				idx2 >= MTD_MAX_OOBFREE_ENTRIES_LARGE - 1)
-			break;
 	}
 
-	return layout;
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops brcmnand_hamming_ooblayout_ops = {
+	.ecc = brcmnand_hamming_ooblayout_ecc,
+	.free = brcmnand_hamming_ooblayout_free,
+};
+
+static int brcmnand_bch_ooblayout_ecc(struct mtd_info *mtd, int section,
+				      struct mtd_oob_region *oobregion)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
+	struct brcmnand_host *host = nand_get_controller_data(chip);
+	struct brcmnand_cfg *cfg = &host->hwcfg;
+	int sas = cfg->spare_area_size << cfg->sector_size_1k;
+	int sectors = cfg->page_size / (512 << cfg->sector_size_1k);
+
+	if (section >= sectors)
+		return -ERANGE;
+
+	oobregion->offset = (section * (sas + 1)) - chip->ecc.bytes;
+	oobregion->length = chip->ecc.bytes;
+
+	return 0;
+}
+
+static int brcmnand_bch_ooblayout_free_lp(struct mtd_info *mtd, int section,
+					  struct mtd_oob_region *oobregion)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
+	struct brcmnand_host *host = nand_get_controller_data(chip);
+	struct brcmnand_cfg *cfg = &host->hwcfg;
+	int sas = cfg->spare_area_size << cfg->sector_size_1k;
+	int sectors = cfg->page_size / (512 << cfg->sector_size_1k);
+
+	if (section >= sectors)
+		return -ERANGE;
+
+	if (sas <= chip->ecc.bytes)
+		return 0;
+
+	oobregion->offset = section * sas;
+	oobregion->length = sas - chip->ecc.bytes;
+
+	if (!section) {
+		oobregion->offset++;
+		oobregion->length--;
+	}
+
+	return 0;
 }
 
-static struct nand_ecclayout *brcmstb_choose_ecc_layout(
-		struct brcmnand_host *host)
+static int brcmnand_bch_ooblayout_free_sp(struct mtd_info *mtd, int section,
+					  struct mtd_oob_region *oobregion)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
+	struct brcmnand_host *host = nand_get_controller_data(chip);
+	struct brcmnand_cfg *cfg = &host->hwcfg;
+	int sas = cfg->spare_area_size << cfg->sector_size_1k;
+
+	if (section > 1 || sas - chip->ecc.bytes < 6 ||
+	    (section && sas - chip->ecc.bytes == 6))
+		return -ERANGE;
+
+	if (!section) {
+		oobregion->offset = 0;
+		oobregion->length = 5;
+	} else {
+		oobregion->offset = 6;
+		oobregion->length = sas - chip->ecc.bytes - 6;
+	}
+
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops brcmnand_bch_lp_ooblayout_ops = {
+	.ecc = brcmnand_bch_ooblayout_ecc,
+	.free = brcmnand_bch_ooblayout_free_lp,
+};
+
+static const struct mtd_ooblayout_ops brcmnand_bch_sp_ooblayout_ops = {
+	.ecc = brcmnand_bch_ooblayout_ecc,
+	.free = brcmnand_bch_ooblayout_free_sp,
+};
+
+static int brcmstb_choose_ecc_layout(struct brcmnand_host *host)
 {
-	struct nand_ecclayout *layout;
 	struct brcmnand_cfg *p = &host->hwcfg;
+	struct mtd_info *mtd = nand_to_mtd(&host->chip);
+	struct nand_ecc_ctrl *ecc = &host->chip.ecc;
 	unsigned int ecc_level = p->ecc_level;
+	int sas = p->spare_area_size << p->sector_size_1k;
+	int sectors = p->page_size / (512 << p->sector_size_1k);
 
 	if (p->sector_size_1k)
 		ecc_level <<= 1;
 
-	layout = brcmnand_create_layout(ecc_level, host);
-	if (!layout) {
+	if (is_hamming_ecc(p)) {
+		ecc->bytes = 3 * sectors;
+		mtd_set_ooblayout(mtd, &brcmnand_hamming_ooblayout_ops);
+		return 0;
+	}
+
+	/*
+	 * CONTROLLER_VERSION:
+	 *   < v5.0: ECC_REQ = ceil(BCH_T * 13/8)
+	 *  >= v5.0: ECC_REQ = ceil(BCH_T * 14/8)
+	 * But we will just be conservative.
+	 */
+	ecc->bytes = DIV_ROUND_UP(ecc_level * 14, 8);
+	if (p->page_size == 512)
+		mtd_set_ooblayout(mtd, &brcmnand_bch_sp_ooblayout_ops);
+	else
+		mtd_set_ooblayout(mtd, &brcmnand_bch_lp_ooblayout_ops);
+
+	if (ecc->bytes >= sas) {
 		dev_err(&host->pdev->dev,
-				"no proper ecc_layout for this NAND cfg\n");
-		return NULL;
+			"error: ECC too large for OOB (ECC bytes %d, spare sector %d)\n",
+			ecc->bytes, sas);
+		return -EINVAL;
 	}
 
-	return layout;
+	return 0;
 }
 
 static void brcmnand_wp(struct mtd_info *mtd, int wp)
@@ -1870,9 +1925,31 @@ static int brcmnand_setup_dev(struct brcmnand_host *host)
 	cfg->col_adr_bytes = 2;
 	cfg->blk_adr_bytes = get_blk_adr_bytes(mtd->size, mtd->writesize);
 
+	if (chip->ecc.mode != NAND_ECC_HW) {
+		dev_err(ctrl->dev, "only HW ECC supported; selected: %d\n",
+			chip->ecc.mode);
+		return -EINVAL;
+	}
+
+	if (chip->ecc.algo == NAND_ECC_UNKNOWN) {
+		if (chip->ecc.strength == 1 && chip->ecc.size == 512)
+			/* Default to Hamming for 1-bit ECC, if unspecified */
+			chip->ecc.algo = NAND_ECC_HAMMING;
+		else
+			/* Otherwise, BCH */
+			chip->ecc.algo = NAND_ECC_BCH;
+	}
+
+	if (chip->ecc.algo == NAND_ECC_HAMMING && (chip->ecc.strength != 1 ||
+						   chip->ecc.size != 512)) {
+		dev_err(ctrl->dev, "invalid Hamming params: %d bits per %d bytes\n",
+			chip->ecc.strength, chip->ecc.size);
+		return -EINVAL;
+	}
+
 	switch (chip->ecc.size) {
 	case 512:
-		if (chip->ecc.strength == 1) /* Hamming */
+		if (chip->ecc.algo == NAND_ECC_HAMMING)
 			cfg->ecc_level = 15;
 		else
 			cfg->ecc_level = chip->ecc.strength;
@@ -2001,8 +2078,8 @@ static int brcmnand_init_cs(struct brcmnand_host *host, struct device_node *dn)
 	 */
 	chip->options |= NAND_USE_BOUNCE_BUFFER;
 
-	if (of_get_nand_on_flash_bbt(dn))
-		chip->bbt_options |= NAND_BBT_USE_FLASH | NAND_BBT_NO_OOB;
+	if (chip->bbt_options & NAND_BBT_USE_FLASH)
+		chip->bbt_options |= NAND_BBT_NO_OOB;
 
 	if (brcmnand_setup_dev(host))
 		return -ENXIO;
@@ -2011,9 +2088,9 @@ static int brcmnand_init_cs(struct brcmnand_host *host, struct device_node *dn)
 	/* only use our internal HW threshold */
 	mtd->bitflip_threshold = 1;
 
-	chip->ecc.layout = brcmstb_choose_ecc_layout(host);
-	if (!chip->ecc.layout)
-		return -ENXIO;
+	ret = brcmstb_choose_ecc_layout(host);
+	if (ret)
+		return ret;
 
 	if (nand_scan_tail(mtd))
 		return -ENXIO;
@@ -2115,6 +2192,7 @@ static const struct of_device_id brcmnand_of_match[] = {
 	{ .compatible = "brcm,brcmnand-v5.0" },
 	{ .compatible = "brcm,brcmnand-v6.0" },
 	{ .compatible = "brcm,brcmnand-v6.1" },
+	{ .compatible = "brcm,brcmnand-v6.2" },
 	{ .compatible = "brcm,brcmnand-v7.0" },
 	{ .compatible = "brcm,brcmnand-v7.1" },
 	{},
diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c
index e553aff..0b0c937 100644
--- a/drivers/mtd/nand/cafe_nand.c
+++ b/drivers/mtd/nand/cafe_nand.c
@@ -459,10 +459,37 @@ static int cafe_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip,
 	return max_bitflips;
 }
 
-static struct nand_ecclayout cafe_oobinfo_2048 = {
-	.eccbytes = 14,
-	.eccpos = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13},
-	.oobfree = {{14, 50}}
+static int cafe_ooblayout_ecc(struct mtd_info *mtd, int section,
+			      struct mtd_oob_region *oobregion)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
+
+	if (section)
+		return -ERANGE;
+
+	oobregion->offset = 0;
+	oobregion->length = chip->ecc.total;
+
+	return 0;
+}
+
+static int cafe_ooblayout_free(struct mtd_info *mtd, int section,
+			       struct mtd_oob_region *oobregion)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
+
+	if (section)
+		return -ERANGE;
+
+	oobregion->offset = chip->ecc.total;
+	oobregion->length = mtd->oobsize - chip->ecc.total;
+
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops cafe_ooblayout_ops = {
+	.ecc = cafe_ooblayout_ecc,
+	.free = cafe_ooblayout_free,
 };
 
 /* Ick. The BBT code really ought to be able to work this bit out
@@ -494,12 +521,6 @@ static struct nand_bbt_descr cafe_bbt_mirror_descr_2048 = {
 	.pattern = cafe_mirror_pattern_2048
 };
 
-static struct nand_ecclayout cafe_oobinfo_512 = {
-	.eccbytes = 14,
-	.eccpos = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13},
-	.oobfree = {{14, 2}}
-};
-
 static struct nand_bbt_descr cafe_bbt_main_descr_512 = {
 	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
 		| NAND_BBT_2BIT | NAND_BBT_VERSION,
@@ -743,12 +764,11 @@ static int cafe_nand_probe(struct pci_dev *pdev,
 		cafe->ctl2 |= 1<<29; /* 2KiB page size */
 
 	/* Set up ECC according to the type of chip we found */
+	mtd_set_ooblayout(mtd, &cafe_ooblayout_ops);
 	if (mtd->writesize == 2048) {
-		cafe->nand.ecc.layout = &cafe_oobinfo_2048;
 		cafe->nand.bbt_td = &cafe_bbt_main_descr_2048;
 		cafe->nand.bbt_md = &cafe_bbt_mirror_descr_2048;
 	} else if (mtd->writesize == 512) {
-		cafe->nand.ecc.layout = &cafe_oobinfo_512;
 		cafe->nand.bbt_td = &cafe_bbt_main_descr_512;
 		cafe->nand.bbt_md = &cafe_bbt_mirror_descr_512;
 	} else {
diff --git a/drivers/mtd/nand/cmx270_nand.c b/drivers/mtd/nand/cmx270_nand.c
index 6f97ebb..4913378 100644
--- a/drivers/mtd/nand/cmx270_nand.c
+++ b/drivers/mtd/nand/cmx270_nand.c
@@ -187,6 +187,7 @@ static int __init cmx270_init(void)
 	/* 15 us command delay time */
 	this->chip_delay = 20;
 	this->ecc.mode = NAND_ECC_SOFT;
+	this->ecc.algo = NAND_ECC_HAMMING;
 
 	/* read/write functions */
 	this->read_byte = cmx270_read_byte;
diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
index 8cb821b..cc07ba0 100644
--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -34,7 +34,6 @@
 #include <linux/slab.h>
 #include <linux/of_device.h>
 #include <linux/of.h>
-#include <linux/of_mtd.h>
 
 #include <linux/platform_data/mtd-davinci.h>
 #include <linux/platform_data/mtd-davinci-aemif.h>
@@ -54,7 +53,6 @@
  */
 struct davinci_nand_info {
 	struct nand_chip	chip;
-	struct nand_ecclayout	ecclayout;
 
 	struct device		*dev;
 	struct clk		*clk;
@@ -480,63 +478,46 @@ static int nand_davinci_dev_ready(struct mtd_info *mtd)
  * ten ECC bytes plus the manufacturer's bad block marker byte, and
  * and not overlapping the default BBT markers.
  */
-static struct nand_ecclayout hwecc4_small = {
-	.eccbytes = 10,
-	.eccpos = { 0, 1, 2, 3, 4,
-		/* offset 5 holds the badblock marker */
-		6, 7,
-		13, 14, 15, },
-	.oobfree = {
-		{.offset = 8, .length = 5, },
-		{.offset = 16, },
-	},
-};
+static int hwecc4_ooblayout_small_ecc(struct mtd_info *mtd, int section,
+				      struct mtd_oob_region *oobregion)
+{
+	if (section > 2)
+		return -ERANGE;
+
+	if (!section) {
+		oobregion->offset = 0;
+		oobregion->length = 5;
+	} else if (section == 1) {
+		oobregion->offset = 6;
+		oobregion->length = 2;
+	} else {
+		oobregion->offset = 13;
+		oobregion->length = 3;
+	}
 
-/* An ECC layout for using 4-bit ECC with large-page (2048bytes) flash,
- * storing ten ECC bytes plus the manufacturer's bad block marker byte,
- * and not overlapping the default BBT markers.
- */
-static struct nand_ecclayout hwecc4_2048 = {
-	.eccbytes = 40,
-	.eccpos = {
-		/* at the end of spare sector */
-		24, 25, 26, 27, 28, 29,	30, 31, 32, 33,
-		34, 35, 36, 37, 38, 39,	40, 41, 42, 43,
-		44, 45, 46, 47, 48, 49, 50, 51, 52, 53,
-		54, 55, 56, 57, 58, 59, 60, 61, 62, 63,
-		},
-	.oobfree = {
-		/* 2 bytes at offset 0 hold manufacturer badblock markers */
-		{.offset = 2, .length = 22, },
-		/* 5 bytes at offset 8 hold BBT markers */
-		/* 8 bytes at offset 16 hold JFFS2 clean markers */
-	},
-};
+	return 0;
+}
 
-/*
- * An ECC layout for using 4-bit ECC with large-page (4096bytes) flash,
- * storing ten ECC bytes plus the manufacturer's bad block marker byte,
- * and not overlapping the default BBT markers.
- */
-static struct nand_ecclayout hwecc4_4096 = {
-	.eccbytes = 80,
-	.eccpos = {
-		/* at the end of spare sector */
-		48, 49, 50, 51, 52, 53, 54, 55, 56, 57,
-		58, 59, 60, 61, 62, 63, 64, 65, 66, 67,
-		68, 69, 70, 71, 72, 73, 74, 75, 76, 77,
-		78, 79, 80, 81, 82, 83, 84, 85, 86, 87,
-		88, 89, 90, 91, 92, 93, 94, 95, 96, 97,
-		98, 99, 100, 101, 102, 103, 104, 105, 106, 107,
-		108, 109, 110, 111, 112, 113, 114, 115, 116, 117,
-		118, 119, 120, 121, 122, 123, 124, 125, 126, 127,
-	},
-	.oobfree = {
-		/* 2 bytes at offset 0 hold manufacturer badblock markers */
-		{.offset = 2, .length = 46, },
-		/* 5 bytes at offset 8 hold BBT markers */
-		/* 8 bytes at offset 16 hold JFFS2 clean markers */
-	},
+static int hwecc4_ooblayout_small_free(struct mtd_info *mtd, int section,
+				       struct mtd_oob_region *oobregion)
+{
+	if (section > 1)
+		return -ERANGE;
+
+	if (!section) {
+		oobregion->offset = 8;
+		oobregion->length = 5;
+	} else {
+		oobregion->offset = 16;
+		oobregion->length = mtd->oobsize - 16;
+	}
+
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops hwecc4_small_ooblayout_ops = {
+	.ecc = hwecc4_ooblayout_small_ecc,
+	.free = hwecc4_ooblayout_small_free,
 };
 
 #if defined(CONFIG_OF)
@@ -577,8 +558,6 @@ static struct davinci_nand_pdata
 			"ti,davinci-mask-chipsel", &prop))
 			pdata->mask_chipsel = prop;
 		if (!of_property_read_string(pdev->dev.of_node,
-			"nand-ecc-mode", &mode) ||
-		    !of_property_read_string(pdev->dev.of_node,
 			"ti,davinci-ecc-mode", &mode)) {
 			if (!strncmp("none", mode, 4))
 				pdata->ecc_mode = NAND_ECC_NONE;
@@ -591,14 +570,11 @@ static struct davinci_nand_pdata
 			"ti,davinci-ecc-bits", &prop))
 			pdata->ecc_bits = prop;
 
-		prop = of_get_nand_bus_width(pdev->dev.of_node);
-		if (0 < prop || !of_property_read_u32(pdev->dev.of_node,
-			"ti,davinci-nand-buswidth", &prop))
-			if (prop == 16)
-				pdata->options |= NAND_BUSWIDTH_16;
+		if (!of_property_read_u32(pdev->dev.of_node,
+			"ti,davinci-nand-buswidth", &prop) && prop == 16)
+			pdata->options |= NAND_BUSWIDTH_16;
+
 		if (of_property_read_bool(pdev->dev.of_node,
-			"nand-on-flash-bbt") ||
-		    of_property_read_bool(pdev->dev.of_node,
 			"ti,davinci-nand-use-bbt"))
 			pdata->bbt_options = NAND_BBT_USE_FLASH;
 
@@ -628,7 +604,6 @@ static int nand_davinci_probe(struct platform_device *pdev)
 	void __iomem			*base;
 	int				ret;
 	uint32_t			val;
-	nand_ecc_modes_t		ecc_mode;
 	struct mtd_info			*mtd;
 
 	pdata = nand_davinci_get_pdata(pdev);
@@ -712,13 +687,53 @@ static int nand_davinci_probe(struct platform_device *pdev)
 	info->chip.write_buf    = nand_davinci_write_buf;
 
 	/* Use board-specific ECC config */
-	ecc_mode		= pdata->ecc_mode;
+	info->chip.ecc.mode	= pdata->ecc_mode;
 
 	ret = -EINVAL;
-	switch (ecc_mode) {
+
+	info->clk = devm_clk_get(&pdev->dev, "aemif");
+	if (IS_ERR(info->clk)) {
+		ret = PTR_ERR(info->clk);
+		dev_dbg(&pdev->dev, "unable to get AEMIF clock, err %d\n", ret);
+		return ret;
+	}
+
+	ret = clk_prepare_enable(info->clk);
+	if (ret < 0) {
+		dev_dbg(&pdev->dev, "unable to enable AEMIF clock, err %d\n",
+			ret);
+		goto err_clk_enable;
+	}
+
+	spin_lock_irq(&davinci_nand_lock);
+
+	/* put CSxNAND into NAND mode */
+	val = davinci_nand_readl(info, NANDFCR_OFFSET);
+	val |= BIT(info->core_chipsel);
+	davinci_nand_writel(info, NANDFCR_OFFSET, val);
+
+	spin_unlock_irq(&davinci_nand_lock);
+
+	/* Scan to find existence of the device(s) */
+	ret = nand_scan_ident(mtd, pdata->mask_chipsel ? 2 : 1, NULL);
+	if (ret < 0) {
+		dev_dbg(&pdev->dev, "no NAND chip(s) found\n");
+		goto err;
+	}
+
+	switch (info->chip.ecc.mode) {
 	case NAND_ECC_NONE:
+		pdata->ecc_bits = 0;
+		break;
 	case NAND_ECC_SOFT:
 		pdata->ecc_bits = 0;
+		/*
+		 * This driver expects Hamming based ECC when ecc_mode is set
+		 * to NAND_ECC_SOFT. Force ecc.algo to NAND_ECC_HAMMING to
+		 * avoid adding an extra ->ecc_algo field to
+		 * davinci_nand_pdata.
+		 */
+		info->chip.ecc.algo = NAND_ECC_HAMMING;
 		break;
 	case NAND_ECC_HW:
 		if (pdata->ecc_bits == 4) {
@@ -754,37 +769,6 @@ static int nand_davinci_probe(struct platform_device *pdev)
 	default:
 		return -EINVAL;
 	}
-	info->chip.ecc.mode = ecc_mode;
-
-	info->clk = devm_clk_get(&pdev->dev, "aemif");
-	if (IS_ERR(info->clk)) {
-		ret = PTR_ERR(info->clk);
-		dev_dbg(&pdev->dev, "unable to get AEMIF clock, err %d\n", ret);
-		return ret;
-	}
-
-	ret = clk_prepare_enable(info->clk);
-	if (ret < 0) {
-		dev_dbg(&pdev->dev, "unable to enable AEMIF clock, err %d\n",
-			ret);
-		goto err_clk_enable;
-	}
-
-	spin_lock_irq(&davinci_nand_lock);
-
-	/* put CSxNAND into NAND mode */
-	val = davinci_nand_readl(info, NANDFCR_OFFSET);
-	val |= BIT(info->core_chipsel);
-	davinci_nand_writel(info, NANDFCR_OFFSET, val);
-
-	spin_unlock_irq(&davinci_nand_lock);
-
-	/* Scan to find existence of the device(s) */
-	ret = nand_scan_ident(mtd, pdata->mask_chipsel ? 2 : 1, NULL);
-	if (ret < 0) {
-		dev_dbg(&pdev->dev, "no NAND chip(s) found\n");
-		goto err;
-	}
 
 	/* Update ECC layout if needed ... for 1-bit HW ECC, the default
 	 * is OK, but it allocates 6 bytes when only 3 are needed (for
@@ -805,26 +789,14 @@ static int nand_davinci_probe(struct platform_device *pdev)
 		 * table marker fits in the free bytes.
 		 */
 		if (chunks == 1) {
-			info->ecclayout = hwecc4_small;
-			info->ecclayout.oobfree[1].length = mtd->oobsize - 16;
-			goto syndrome_done;
-		}
-		if (chunks == 4) {
-			info->ecclayout = hwecc4_2048;
-			info->chip.ecc.mode = NAND_ECC_HW_OOB_FIRST;
-			goto syndrome_done;
-		}
-		if (chunks == 8) {
-			info->ecclayout = hwecc4_4096;
+			mtd_set_ooblayout(mtd, &hwecc4_small_ooblayout_ops);
+		} else if (chunks == 4 || chunks == 8) {
+			mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
 			info->chip.ecc.mode = NAND_ECC_HW_OOB_FIRST;
-			goto syndrome_done;
+		} else {
+			ret = -EIO;
+			goto err;
 		}
-
-		ret = -EIO;
-		goto err;
-
-syndrome_done:
-		info->chip.ecc.layout = &info->ecclayout;
 	}
 
 	ret = nand_scan_tail(mtd);
@@ -850,7 +822,7 @@ err:
 
 err_clk_enable:
 	spin_lock_irq(&davinci_nand_lock);
-	if (ecc_mode == NAND_ECC_HW_SYNDROME)
+	if (info->chip.ecc.mode == NAND_ECC_HW_SYNDROME)
 		ecc4_busy = false;
 	spin_unlock_irq(&davinci_nand_lock);
 	return ret;
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index 30bf5f6..0476ae8 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -1374,13 +1374,41 @@ static void denali_hw_init(struct denali_nand_info *denali)
  * correction
  */
 #define ECC_8BITS	14
-static struct nand_ecclayout nand_8bit_oob = {
-	.eccbytes = 14,
-};
-
 #define ECC_15BITS	26
-static struct nand_ecclayout nand_15bit_oob = {
-	.eccbytes = 26,
+
+static int denali_ooblayout_ecc(struct mtd_info *mtd, int section,
+				struct mtd_oob_region *oobregion)
+{
+	struct denali_nand_info *denali = mtd_to_denali(mtd);
+	struct nand_chip *chip = mtd_to_nand(mtd);
+
+	if (section)
+		return -ERANGE;
+
+	oobregion->offset = denali->bbtskipbytes;
+	oobregion->length = chip->ecc.total;
+
+	return 0;
+}
+
+static int denali_ooblayout_free(struct mtd_info *mtd, int section,
+				 struct mtd_oob_region *oobregion)
+{
+	struct denali_nand_info *denali = mtd_to_denali(mtd);
+	struct nand_chip *chip = mtd_to_nand(mtd);
+
+	if (section)
+		return -ERANGE;
+
+	oobregion->offset = chip->ecc.total + denali->bbtskipbytes;
+	oobregion->length = mtd->oobsize - oobregion->offset;
+
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops denali_ooblayout_ops = {
+	.ecc = denali_ooblayout_ecc,
+	.free = denali_ooblayout_free,
 };
 
 static uint8_t bbt_pattern[] = {'B', 'b', 't', '0' };
@@ -1561,7 +1589,6 @@ int denali_init(struct denali_nand_info *denali)
 			ECC_SECTOR_SIZE)))) {
 		/* if MLC OOB size is large enough, use 15bit ECC*/
 		denali->nand.ecc.strength = 15;
-		denali->nand.ecc.layout = &nand_15bit_oob;
 		denali->nand.ecc.bytes = ECC_15BITS;
 		iowrite32(15, denali->flash_reg + ECC_CORRECTION);
 	} else if (mtd->oobsize < (denali->bbtskipbytes +
@@ -1571,20 +1598,13 @@ int denali_init(struct denali_nand_info *denali)
 		goto failed_req_irq;
 	} else {
 		denali->nand.ecc.strength = 8;
-		denali->nand.ecc.layout = &nand_8bit_oob;
 		denali->nand.ecc.bytes = ECC_8BITS;
 		iowrite32(8, denali->flash_reg + ECC_CORRECTION);
 	}
 
+	mtd_set_ooblayout(mtd, &denali_ooblayout_ops);
 	denali->nand.ecc.bytes *= denali->devnum;
 	denali->nand.ecc.strength *= denali->devnum;
-	denali->nand.ecc.layout->eccbytes *=
-		mtd->writesize / ECC_SECTOR_SIZE;
-	denali->nand.ecc.layout->oobfree[0].offset =
-		denali->bbtskipbytes + denali->nand.ecc.layout->eccbytes;
-	denali->nand.ecc.layout->oobfree[0].length =
-		mtd->oobsize - denali->nand.ecc.layout->eccbytes -
-		denali->bbtskipbytes;
 
 	/*
 	 * Let driver know the total blocks number and how many blocks
diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c
index 547c100..a023ab9 100644
--- a/drivers/mtd/nand/diskonchip.c
+++ b/drivers/mtd/nand/diskonchip.c
@@ -950,20 +950,50 @@ static int doc200x_correct_data(struct mtd_info *mtd, u_char *dat,
 
 //u_char mydatabuf[528];
 
-/* The strange out-of-order .oobfree list below is a (possibly unneeded)
- * attempt to retain compatibility.  It used to read:
- * 	.oobfree = { {8, 8} }
- * Since that leaves two bytes unusable, it was changed.  But the following
- * scheme might affect existing jffs2 installs by moving the cleanmarker:
- * 	.oobfree = { {6, 10} }
- * jffs2 seems to handle the above gracefully, but the current scheme seems
- * safer.  The only problem with it is that any code that parses oobfree must
- * be able to handle out-of-order segments.
- */
-static struct nand_ecclayout doc200x_oobinfo = {
-	.eccbytes = 6,
-	.eccpos = {0, 1, 2, 3, 4, 5},
-	.oobfree = {{8, 8}, {6, 2}}
+static int doc200x_ooblayout_ecc(struct mtd_info *mtd, int section,
+				 struct mtd_oob_region *oobregion)
+{
+	if (section)
+		return -ERANGE;
+
+	oobregion->offset = 0;
+	oobregion->length = 6;
+
+	return 0;
+}
+
+static int doc200x_ooblayout_free(struct mtd_info *mtd, int section,
+				  struct mtd_oob_region *oobregion)
+{
+	if (section > 1)
+		return -ERANGE;
+
+	/*
+	 * The strange out-of-order free bytes definition is a (possibly
+	 * unneeded) attempt to retain compatibility.  It used to read:
+	 *	.oobfree = { {8, 8} }
+	 * Since that leaves two bytes unusable, it was changed.  But the
+	 * following scheme might affect existing jffs2 installs by moving the
+	 * cleanmarker:
+	 *	.oobfree = { {6, 10} }
+	 * jffs2 seems to handle the above gracefully, but the current scheme
+	 * seems safer. The only problem with it is that any code retrieving
+	 * free bytes position must be able to handle out-of-order segments.
+	 */
+	if (!section) {
+		oobregion->offset = 8;
+		oobregion->length = 8;
+	} else {
+		oobregion->offset = 6;
+		oobregion->length = 2;
+	}
+
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops doc200x_ooblayout_ops = {
+	.ecc = doc200x_ooblayout_ecc,
+	.free = doc200x_ooblayout_free,
 };
 
 /* Find the (I)NFTL Media Header, and optionally also the mirror media header.
@@ -1537,6 +1567,7 @@ static int __init doc_probe(unsigned long physadr)
 	nand->bbt_md		= nand->bbt_td + 1;
 
 	mtd->owner		= THIS_MODULE;
+	mtd_set_ooblayout(mtd, &doc200x_ooblayout_ops);
 
 	nand_set_controller_data(nand, doc);
 	nand->select_chip	= doc200x_select_chip;
@@ -1548,7 +1579,6 @@ static int __init doc_probe(unsigned long physadr)
 	nand->ecc.calculate	= doc200x_calculate_ecc;
 	nand->ecc.correct	= doc200x_correct_data;
 
-	nand->ecc.layout	= &doc200x_oobinfo;
 	nand->ecc.mode		= NAND_ECC_HW_SYNDROME;
 	nand->ecc.size		= 512;
 	nand->ecc.bytes		= 6;
diff --git a/drivers/mtd/nand/docg4.c b/drivers/mtd/nand/docg4.c
index d86a60e..4731699 100644
--- a/drivers/mtd/nand/docg4.c
+++ b/drivers/mtd/nand/docg4.c
@@ -222,10 +222,33 @@ struct docg4_priv {
  * Bytes 8 - 14 are hw-generated ecc covering entire page + oob bytes 0 - 14.
  * Byte 15 (the last) is used by the driver as a "page written" flag.
  */
-static struct nand_ecclayout docg4_oobinfo = {
-	.eccbytes = 9,
-	.eccpos = {7, 8, 9, 10, 11, 12, 13, 14, 15},
-	.oobfree = { {.offset = 2, .length = 5} }
+static int docg4_ooblayout_ecc(struct mtd_info *mtd, int section,
+			       struct mtd_oob_region *oobregion)
+{
+	if (section)
+		return -ERANGE;
+
+	oobregion->offset = 7;
+	oobregion->length = 9;
+
+	return 0;
+}
+
+static int docg4_ooblayout_free(struct mtd_info *mtd, int section,
+				struct mtd_oob_region *oobregion)
+{
+	if (section)
+		return -ERANGE;
+
+	oobregion->offset = 2;
+	oobregion->length = 5;
+
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops docg4_ooblayout_ops = {
+	.ecc = docg4_ooblayout_ecc,
+	.free = docg4_ooblayout_free,
 };
 
 /*
@@ -1209,6 +1232,7 @@ static void __init init_mtd_structs(struct mtd_info *mtd)
 	mtd->writesize = DOCG4_PAGE_SIZE;
 	mtd->erasesize = DOCG4_BLOCK_SIZE;
 	mtd->oobsize = DOCG4_OOB_SIZE;
+	mtd_set_ooblayout(mtd, &docg4_ooblayout_ops);
 	nand->chipsize = DOCG4_CHIP_SIZE;
 	nand->chip_shift = DOCG4_CHIP_SHIFT;
 	nand->bbt_erase_shift = nand->phys_erase_shift = DOCG4_ERASE_SHIFT;
@@ -1217,7 +1241,6 @@ static void __init init_mtd_structs(struct mtd_info *mtd)
 	nand->pagemask = 0x3ffff;
 	nand->badblockpos = NAND_LARGE_BADBLOCK_POS;
 	nand->badblockbits = 8;
-	nand->ecc.layout = &docg4_oobinfo;
 	nand->ecc.mode = NAND_ECC_HW_SYNDROME;
 	nand->ecc.size = DOCG4_PAGE_SIZE;
 	nand->ecc.prepad = 8;
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 059d5f7..60a88f2 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -79,32 +79,53 @@ struct fsl_elbc_fcm_ctrl {
 
 /* These map to the positions used by the FCM hardware ECC generator */
 
-/* Small Page FLASH with FMR[ECCM] = 0 */
-static struct nand_ecclayout fsl_elbc_oob_sp_eccm0 = {
-	.eccbytes = 3,
-	.eccpos = {6, 7, 8},
-	.oobfree = { {0, 5}, {9, 7} },
-};
+static int fsl_elbc_ooblayout_ecc(struct mtd_info *mtd, int section,
+				  struct mtd_oob_region *oobregion)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
+	struct fsl_elbc_mtd *priv = nand_get_controller_data(chip);
 
-/* Small Page FLASH with FMR[ECCM] = 1 */
-static struct nand_ecclayout fsl_elbc_oob_sp_eccm1 = {
-	.eccbytes = 3,
-	.eccpos = {8, 9, 10},
-	.oobfree = { {0, 5}, {6, 2}, {11, 5} },
-};
+	if (section >= chip->ecc.steps)
+		return -ERANGE;
 
-/* Large Page FLASH with FMR[ECCM] = 0 */
-static struct nand_ecclayout fsl_elbc_oob_lp_eccm0 = {
-	.eccbytes = 12,
-	.eccpos = {6, 7, 8, 22, 23, 24, 38, 39, 40, 54, 55, 56},
-	.oobfree = { {1, 5}, {9, 13}, {25, 13}, {41, 13}, {57, 7} },
-};
+	oobregion->offset = (16 * section) + 6;
+	if (priv->fmr & FMR_ECCM)
+		oobregion->offset += 2;
 
-/* Large Page FLASH with FMR[ECCM] = 1 */
-static struct nand_ecclayout fsl_elbc_oob_lp_eccm1 = {
-	.eccbytes = 12,
-	.eccpos = {8, 9, 10, 24, 25, 26, 40, 41, 42, 56, 57, 58},
-	.oobfree = { {1, 7}, {11, 13}, {27, 13}, {43, 13}, {59, 5} },
+	oobregion->length = chip->ecc.bytes;
+
+	return 0;
+}
+
+static int fsl_elbc_ooblayout_free(struct mtd_info *mtd, int section,
+				   struct mtd_oob_region *oobregion)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
+	struct fsl_elbc_mtd *priv = nand_get_controller_data(chip);
+
+	if (section > chip->ecc.steps)
+		return -ERANGE;
+
+	if (!section) {
+		oobregion->offset = 0;
+		if (mtd->writesize > 512)
+			oobregion->offset++;
+		oobregion->length = (priv->fmr & FMR_ECCM) ? 7 : 5;
+	} else {
+		oobregion->offset = (16 * section) -
+				    ((priv->fmr & FMR_ECCM) ? 5 : 7);
+		if (section < chip->ecc.steps)
+			oobregion->length = 13;
+		else
+			oobregion->length = mtd->oobsize - oobregion->offset;
+	}
+
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops fsl_elbc_ooblayout_ops = {
+	.ecc = fsl_elbc_ooblayout_ecc,
+	.free = fsl_elbc_ooblayout_free,
 };
 
 /*
@@ -657,8 +678,8 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd)
 	        chip->ecc.bytes);
 	dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.total = %d\n",
 	        chip->ecc.total);
-	dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.layout = %p\n",
-	        chip->ecc.layout);
+	dev_dbg(priv->dev, "fsl_elbc_init: mtd->ooblayout = %p\n",
+		mtd->ooblayout);
 	dev_dbg(priv->dev, "fsl_elbc_init: mtd->flags = %08x\n", mtd->flags);
 	dev_dbg(priv->dev, "fsl_elbc_init: mtd->size = %lld\n", mtd->size);
 	dev_dbg(priv->dev, "fsl_elbc_init: mtd->erasesize = %d\n",
@@ -675,14 +696,6 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd)
 	} else if (mtd->writesize == 2048) {
 		priv->page_size = 1;
 		setbits32(&lbc->bank[priv->bank].or, OR_FCM_PGS);
-		/* adjust ecc setup if needed */
-		if ((in_be32(&lbc->bank[priv->bank].br) & BR_DECC) ==
-		    BR_DECC_CHK_GEN) {
-			chip->ecc.size = 512;
-			chip->ecc.layout = (priv->fmr & FMR_ECCM) ?
-			                   &fsl_elbc_oob_lp_eccm1 :
-			                   &fsl_elbc_oob_lp_eccm0;
-		}
 	} else {
 		dev_err(priv->dev,
 		        "fsl_elbc_init: page size %d is not supported\n",
@@ -780,15 +793,14 @@ static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv)
 	if ((in_be32(&lbc->bank[priv->bank].br) & BR_DECC) ==
 	    BR_DECC_CHK_GEN) {
 		chip->ecc.mode = NAND_ECC_HW;
-		/* put in small page settings and adjust later if needed */
-		chip->ecc.layout = (priv->fmr & FMR_ECCM) ?
-				&fsl_elbc_oob_sp_eccm1 : &fsl_elbc_oob_sp_eccm0;
+		mtd_set_ooblayout(mtd, &fsl_elbc_ooblayout_ops);
 		chip->ecc.size = 512;
 		chip->ecc.bytes = 3;
 		chip->ecc.strength = 1;
 	} else {
 		/* otherwise fall back to default software ECC */
 		chip->ecc.mode = NAND_ECC_SOFT;
+		chip->ecc.algo = NAND_ECC_HAMMING;
 	}
 
 	return 0;
diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c
index 43f5a3a..4e9e5fd 100644
--- a/drivers/mtd/nand/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/fsl_ifc_nand.c
@@ -67,136 +67,6 @@ struct fsl_ifc_nand_ctrl {
 
 static struct fsl_ifc_nand_ctrl *ifc_nand_ctrl;
 
-/* 512-byte page with 4-bit ECC, 8-bit */
-static struct nand_ecclayout oob_512_8bit_ecc4 = {
-	.eccbytes = 8,
-	.eccpos = {8, 9, 10, 11, 12, 13, 14, 15},
-	.oobfree = { {0, 5}, {6, 2} },
-};
-
-/* 512-byte page with 4-bit ECC, 16-bit */
-static struct nand_ecclayout oob_512_16bit_ecc4 = {
-	.eccbytes = 8,
-	.eccpos = {8, 9, 10, 11, 12, 13, 14, 15},
-	.oobfree = { {2, 6}, },
-};
-
-/* 2048-byte page size with 4-bit ECC */
-static struct nand_ecclayout oob_2048_ecc4 = {
-	.eccbytes = 32,
-	.eccpos = {
-		8, 9, 10, 11, 12, 13, 14, 15,
-		16, 17, 18, 19, 20, 21, 22, 23,
-		24, 25, 26, 27, 28, 29, 30, 31,
-		32, 33, 34, 35, 36, 37, 38, 39,
-	},
-	.oobfree = { {2, 6}, {40, 24} },
-};
-
-/* 4096-byte page size with 4-bit ECC */
-static struct nand_ecclayout oob_4096_ecc4 = {
-	.eccbytes = 64,
-	.eccpos = {
-		8, 9, 10, 11, 12, 13, 14, 15,
-		16, 17, 18, 19, 20, 21, 22, 23,
-		24, 25, 26, 27, 28, 29, 30, 31,
-		32, 33, 34, 35, 36, 37, 38, 39,
-		40, 41, 42, 43, 44, 45, 46, 47,
-		48, 49, 50, 51, 52, 53, 54, 55,
-		56, 57, 58, 59, 60, 61, 62, 63,
-		64, 65, 66, 67, 68, 69, 70, 71,
-	},
-	.oobfree = { {2, 6}, {72, 56} },
-};
-
-/* 4096-byte page size with 8-bit ECC -- requires 218-byte OOB */
-static struct nand_ecclayout oob_4096_ecc8 = {
-	.eccbytes = 128,
-	.eccpos = {
-		8, 9, 10, 11, 12, 13, 14, 15,
-		16, 17, 18, 19, 20, 21, 22, 23,
-		24, 25, 26, 27, 28, 29, 30, 31,
-		32, 33, 34, 35, 36, 37, 38, 39,
-		40, 41, 42, 43, 44, 45, 46, 47,
-		48, 49, 50, 51, 52, 53, 54, 55,
-		56, 57, 58, 59, 60, 61, 62, 63,
-		64, 65, 66, 67, 68, 69, 70, 71,
-		72, 73, 74, 75, 76, 77, 78, 79,
-		80, 81, 82, 83, 84, 85, 86, 87,
-		88, 89, 90, 91, 92, 93, 94, 95,
-		96, 97, 98, 99, 100, 101, 102, 103,
-		104, 105, 106, 107, 108, 109, 110, 111,
-		112, 113, 114, 115, 116, 117, 118, 119,
-		120, 121, 122, 123, 124, 125, 126, 127,
-		128, 129, 130, 131, 132, 133, 134, 135,
-	},
-	.oobfree = { {2, 6}, {136, 82} },
-};
-
-/* 8192-byte page size with 4-bit ECC */
-static struct nand_ecclayout oob_8192_ecc4 = {
-	.eccbytes = 128,
-	.eccpos = {
-		8, 9, 10, 11, 12, 13, 14, 15,
-		16, 17, 18, 19, 20, 21, 22, 23,
-		24, 25, 26, 27, 28, 29, 30, 31,
-		32, 33, 34, 35, 36, 37, 38, 39,
-		40, 41, 42, 43, 44, 45, 46, 47,
-		48, 49, 50, 51, 52, 53, 54, 55,
-		56, 57, 58, 59, 60, 61, 62, 63,
-		64, 65, 66, 67, 68, 69, 70, 71,
-		72, 73, 74, 75, 76, 77, 78, 79,
-		80, 81, 82, 83, 84, 85, 86, 87,
-		88, 89, 90, 91, 92, 93, 94, 95,
-		96, 97, 98, 99, 100, 101, 102, 103,
-		104, 105, 106, 107, 108, 109, 110, 111,
-		112, 113, 114, 115, 116, 117, 118, 119,
-		120, 121, 122, 123, 124, 125, 126, 127,
-		128, 129, 130, 131, 132, 133, 134, 135,
-	},
-	.oobfree = { {2, 6}, {136, 208} },
-};
-
-/* 8192-byte page size with 8-bit ECC -- requires 218-byte OOB */
-static struct nand_ecclayout oob_8192_ecc8 = {
-	.eccbytes = 256,
-	.eccpos = {
-		8, 9, 10, 11, 12, 13, 14, 15,
-		16, 17, 18, 19, 20, 21, 22, 23,
-		24, 25, 26, 27, 28, 29, 30, 31,
-		32, 33, 34, 35, 36, 37, 38, 39,
-		40, 41, 42, 43, 44, 45, 46, 47,
-		48, 49, 50, 51, 52, 53, 54, 55,
-		56, 57, 58, 59, 60, 61, 62, 63,
-		64, 65, 66, 67, 68, 69, 70, 71,
-		72, 73, 74, 75, 76, 77, 78, 79,
-		80, 81, 82, 83, 84, 85, 86, 87,
-		88, 89, 90, 91, 92, 93, 94, 95,
-		96, 97, 98, 99, 100, 101, 102, 103,
-		104, 105, 106, 107, 108, 109, 110, 111,
-		112, 113, 114, 115, 116, 117, 118, 119,
-		120, 121, 122, 123, 124, 125, 126, 127,
-		128, 129, 130, 131, 132, 133, 134, 135,
-		136, 137, 138, 139, 140, 141, 142, 143,
-		144, 145, 146, 147, 148, 149, 150, 151,
-		152, 153, 154, 155, 156, 157, 158, 159,
-		160, 161, 162, 163, 164, 165, 166, 167,
-		168, 169, 170, 171, 172, 173, 174, 175,
-		176, 177, 178, 179, 180, 181, 182, 183,
-		184, 185, 186, 187, 188, 189, 190, 191,
-		192, 193, 194, 195, 196, 197, 198, 199,
-		200, 201, 202, 203, 204, 205, 206, 207,
-		208, 209, 210, 211, 212, 213, 214, 215,
-		216, 217, 218, 219, 220, 221, 222, 223,
-		224, 225, 226, 227, 228, 229, 230, 231,
-		232, 233, 234, 235, 236, 237, 238, 239,
-		240, 241, 242, 243, 244, 245, 246, 247,
-		248, 249, 250, 251, 252, 253, 254, 255,
-		256, 257, 258, 259, 260, 261, 262, 263,
-	},
-	.oobfree = { {2, 6}, {264, 80} },
-};
-
 /*
  * Generic flash bbt descriptors
  */
@@ -223,6 +93,57 @@ static struct nand_bbt_descr bbt_mirror_descr = {
 	.pattern = mirror_pattern,
 };
 
+static int fsl_ifc_ooblayout_ecc(struct mtd_info *mtd, int section,
+				 struct mtd_oob_region *oobregion)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
+
+	if (section)
+		return -ERANGE;
+
+	oobregion->offset = 8;
+	oobregion->length = chip->ecc.total;
+
+	return 0;
+}
+
+static int fsl_ifc_ooblayout_free(struct mtd_info *mtd, int section,
+				  struct mtd_oob_region *oobregion)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
+
+	if (section > 1)
+		return -ERANGE;
+
+	if (mtd->writesize == 512 &&
+	    !(chip->options & NAND_BUSWIDTH_16)) {
+		if (!section) {
+			oobregion->offset = 0;
+			oobregion->length = 5;
+		} else {
+			oobregion->offset = 6;
+			oobregion->length = 2;
+		}
+
+		return 0;
+	}
+
+	if (!section) {
+		oobregion->offset = 2;
+		oobregion->length = 6;
+	} else {
+		oobregion->offset = chip->ecc.total + 8;
+		oobregion->length = mtd->oobsize - oobregion->offset;
+	}
+
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops fsl_ifc_ooblayout_ops = {
+	.ecc = fsl_ifc_ooblayout_ecc,
+	.free = fsl_ifc_ooblayout_free,
+};
+
 /*
  * Set up the IFC hardware block and page address fields, and the ifc nand
  * structure addr field to point to the correct IFC buffer in memory
@@ -232,7 +153,7 @@ static void set_addr(struct mtd_info *mtd, int column, int page_addr, int oob)
 	struct nand_chip *chip = mtd_to_nand(mtd);
 	struct fsl_ifc_mtd *priv = nand_get_controller_data(chip);
 	struct fsl_ifc_ctrl *ctrl = priv->ctrl;
-	struct fsl_ifc_regs __iomem *ifc = ctrl->regs;
+	struct fsl_ifc_runtime __iomem *ifc = ctrl->rregs;
 	int buf_num;
 
 	ifc_nand_ctrl->page = page_addr;
@@ -257,18 +178,22 @@ static int is_blank(struct mtd_info *mtd, unsigned int bufnum)
 	u8 __iomem *addr = priv->vbase + bufnum * (mtd->writesize * 2);
 	u32 __iomem *mainarea = (u32 __iomem *)addr;
 	u8 __iomem *oob = addr + mtd->writesize;
-	int i;
+	struct mtd_oob_region oobregion = { };
+	int i, section = 0;
 
 	for (i = 0; i < mtd->writesize / 4; i++) {
 		if (__raw_readl(&mainarea[i]) != 0xffffffff)
 			return 0;
 	}
 
-	for (i = 0; i < chip->ecc.layout->eccbytes; i++) {
-		int pos = chip->ecc.layout->eccpos[i];
+	mtd_ooblayout_ecc(mtd, section++, &oobregion);
+	while (oobregion.length) {
+		for (i = 0; i < oobregion.length; i++) {
+			if (__raw_readb(&oob[oobregion.offset + i]) != 0xff)
+				return 0;
+		}
 
-		if (__raw_readb(&oob[pos]) != 0xff)
-			return 0;
+		mtd_ooblayout_ecc(mtd, section++, &oobregion);
 	}
 
 	return 1;
@@ -295,7 +220,7 @@ static void fsl_ifc_run_command(struct mtd_info *mtd)
 	struct fsl_ifc_mtd *priv = nand_get_controller_data(chip);
 	struct fsl_ifc_ctrl *ctrl = priv->ctrl;
 	struct fsl_ifc_nand_ctrl *nctrl = ifc_nand_ctrl;
-	struct fsl_ifc_regs __iomem *ifc = ctrl->regs;
+	struct fsl_ifc_runtime __iomem *ifc = ctrl->rregs;
 	u32 eccstat[4];
 	int i;
 
@@ -371,7 +296,7 @@ static void fsl_ifc_do_read(struct nand_chip *chip,
 {
 	struct fsl_ifc_mtd *priv = nand_get_controller_data(chip);
 	struct fsl_ifc_ctrl *ctrl = priv->ctrl;
-	struct fsl_ifc_regs __iomem *ifc = ctrl->regs;
+	struct fsl_ifc_runtime __iomem *ifc = ctrl->rregs;
 
 	/* Program FIR/IFC_NAND_FCR0 for Small/Large page */
 	if (mtd->writesize > 512) {
@@ -411,7 +336,7 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command,
 	struct nand_chip *chip = mtd_to_nand(mtd);
 	struct fsl_ifc_mtd *priv = nand_get_controller_data(chip);
 	struct fsl_ifc_ctrl *ctrl = priv->ctrl;
-	struct fsl_ifc_regs __iomem *ifc = ctrl->regs;
+	struct fsl_ifc_runtime __iomem *ifc = ctrl->rregs;
 
 	/* clear the read buffer */
 	ifc_nand_ctrl->read_bytes = 0;
@@ -723,7 +648,7 @@ static int fsl_ifc_wait(struct mtd_info *mtd, struct nand_chip *chip)
 {
 	struct fsl_ifc_mtd *priv = nand_get_controller_data(chip);
 	struct fsl_ifc_ctrl *ctrl = priv->ctrl;
-	struct fsl_ifc_regs __iomem *ifc = ctrl->regs;
+	struct fsl_ifc_runtime __iomem *ifc = ctrl->rregs;
 	u32 nand_fsr;
 
 	/* Use READ_STATUS command, but wait for the device to be ready */
@@ -808,8 +733,8 @@ static int fsl_ifc_chip_init_tail(struct mtd_info *mtd)
 							chip->ecc.bytes);
 	dev_dbg(priv->dev, "%s: nand->ecc.total = %d\n", __func__,
 							chip->ecc.total);
-	dev_dbg(priv->dev, "%s: nand->ecc.layout = %p\n", __func__,
-							chip->ecc.layout);
+	dev_dbg(priv->dev, "%s: mtd->ooblayout = %p\n", __func__,
+							mtd->ooblayout);
 	dev_dbg(priv->dev, "%s: mtd->flags = %08x\n", __func__, mtd->flags);
 	dev_dbg(priv->dev, "%s: mtd->size = %lld\n", __func__, mtd->size);
 	dev_dbg(priv->dev, "%s: mtd->erasesize = %d\n", __func__,
@@ -825,39 +750,42 @@ static int fsl_ifc_chip_init_tail(struct mtd_info *mtd)
 static void fsl_ifc_sram_init(struct fsl_ifc_mtd *priv)
 {
 	struct fsl_ifc_ctrl *ctrl = priv->ctrl;
-	struct fsl_ifc_regs __iomem *ifc = ctrl->regs;
+	struct fsl_ifc_runtime __iomem *ifc_runtime = ctrl->rregs;
+	struct fsl_ifc_global __iomem *ifc_global = ctrl->gregs;
 	uint32_t csor = 0, csor_8k = 0, csor_ext = 0;
 	uint32_t cs = priv->bank;
 
 	/* Save CSOR and CSOR_ext */
-	csor = ifc_in32(&ifc->csor_cs[cs].csor);
-	csor_ext = ifc_in32(&ifc->csor_cs[cs].csor_ext);
+	csor = ifc_in32(&ifc_global->csor_cs[cs].csor);
+	csor_ext = ifc_in32(&ifc_global->csor_cs[cs].csor_ext);
 
 	/* chage PageSize 8K and SpareSize 1K*/
 	csor_8k = (csor & ~(CSOR_NAND_PGS_MASK)) | 0x0018C000;
-	ifc_out32(csor_8k, &ifc->csor_cs[cs].csor);
-	ifc_out32(0x0000400, &ifc->csor_cs[cs].csor_ext);
+	ifc_out32(csor_8k, &ifc_global->csor_cs[cs].csor);
+	ifc_out32(0x0000400, &ifc_global->csor_cs[cs].csor_ext);
 
 	/* READID */
 	ifc_out32((IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
-		  (IFC_FIR_OP_UA  << IFC_NAND_FIR0_OP1_SHIFT) |
-		  (IFC_FIR_OP_RB << IFC_NAND_FIR0_OP2_SHIFT),
-		  &ifc->ifc_nand.nand_fir0);
+		    (IFC_FIR_OP_UA  << IFC_NAND_FIR0_OP1_SHIFT) |
+		    (IFC_FIR_OP_RB << IFC_NAND_FIR0_OP2_SHIFT),
+		    &ifc_runtime->ifc_nand.nand_fir0);
 	ifc_out32(NAND_CMD_READID << IFC_NAND_FCR0_CMD0_SHIFT,
-		  &ifc->ifc_nand.nand_fcr0);
-	ifc_out32(0x0, &ifc->ifc_nand.row3);
+		    &ifc_runtime->ifc_nand.nand_fcr0);
+	ifc_out32(0x0, &ifc_runtime->ifc_nand.row3);
 
-	ifc_out32(0x0, &ifc->ifc_nand.nand_fbcr);
+	ifc_out32(0x0, &ifc_runtime->ifc_nand.nand_fbcr);
 
 	/* Program ROW0/COL0 */
-	ifc_out32(0x0, &ifc->ifc_nand.row0);
-	ifc_out32(0x0, &ifc->ifc_nand.col0);
+	ifc_out32(0x0, &ifc_runtime->ifc_nand.row0);
+	ifc_out32(0x0, &ifc_runtime->ifc_nand.col0);
 
 	/* set the chip select for NAND Transaction */
-	ifc_out32(cs << IFC_NAND_CSEL_SHIFT, &ifc->ifc_nand.nand_csel);
+	ifc_out32(cs << IFC_NAND_CSEL_SHIFT,
+		&ifc_runtime->ifc_nand.nand_csel);
 
 	/* start read seq */
-	ifc_out32(IFC_NAND_SEQ_STRT_FIR_STRT, &ifc->ifc_nand.nandseq_strt);
+	ifc_out32(IFC_NAND_SEQ_STRT_FIR_STRT,
+		&ifc_runtime->ifc_nand.nandseq_strt);
 
 	/* wait for command complete flag or timeout */
 	wait_event_timeout(ctrl->nand_wait, ctrl->nand_stat,
@@ -867,17 +795,17 @@ static void fsl_ifc_sram_init(struct fsl_ifc_mtd *priv)
 		printk(KERN_ERR "fsl-ifc: Failed to Initialise SRAM\n");
 
 	/* Restore CSOR and CSOR_ext */
-	ifc_out32(csor, &ifc->csor_cs[cs].csor);
-	ifc_out32(csor_ext, &ifc->csor_cs[cs].csor_ext);
+	ifc_out32(csor, &ifc_global->csor_cs[cs].csor);
+	ifc_out32(csor_ext, &ifc_global->csor_cs[cs].csor_ext);
 }
 
 static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
 {
 	struct fsl_ifc_ctrl *ctrl = priv->ctrl;
-	struct fsl_ifc_regs __iomem *ifc = ctrl->regs;
+	struct fsl_ifc_global __iomem *ifc_global = ctrl->gregs;
+	struct fsl_ifc_runtime __iomem *ifc_runtime = ctrl->rregs;
 	struct nand_chip *chip = &priv->chip;
 	struct mtd_info *mtd = nand_to_mtd(&priv->chip);
-	struct nand_ecclayout *layout;
 	u32 csor;
 
 	/* Fill in fsl_ifc_mtd structure */
@@ -886,7 +814,8 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
 
 	/* fill in nand_chip structure */
 	/* set up function call table */
-	if ((ifc_in32(&ifc->cspr_cs[priv->bank].cspr)) & CSPR_PORT_SIZE_16)
+	if ((ifc_in32(&ifc_global->cspr_cs[priv->bank].cspr))
+		& CSPR_PORT_SIZE_16)
 		chip->read_byte = fsl_ifc_read_byte16;
 	else
 		chip->read_byte = fsl_ifc_read_byte;
@@ -900,13 +829,14 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
 	chip->bbt_td = &bbt_main_descr;
 	chip->bbt_md = &bbt_mirror_descr;
 
-	ifc_out32(0x0, &ifc->ifc_nand.ncfgr);
+	ifc_out32(0x0, &ifc_runtime->ifc_nand.ncfgr);
 
 	/* set up nand options */
 	chip->bbt_options = NAND_BBT_USE_FLASH;
 	chip->options = NAND_NO_SUBPAGE_WRITE;
 
-	if (ifc_in32(&ifc->cspr_cs[priv->bank].cspr) & CSPR_PORT_SIZE_16) {
+	if (ifc_in32(&ifc_global->cspr_cs[priv->bank].cspr)
+		& CSPR_PORT_SIZE_16) {
 		chip->read_byte = fsl_ifc_read_byte16;
 		chip->options |= NAND_BUSWIDTH_16;
 	} else {
@@ -919,20 +849,11 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
 	chip->ecc.read_page = fsl_ifc_read_page;
 	chip->ecc.write_page = fsl_ifc_write_page;
 
-	csor = ifc_in32(&ifc->csor_cs[priv->bank].csor);
-
-	/* Hardware generates ECC per 512 Bytes */
-	chip->ecc.size = 512;
-	chip->ecc.bytes = 8;
-	chip->ecc.strength = 4;
+	csor = ifc_in32(&ifc_global->csor_cs[priv->bank].csor);
 
 	switch (csor & CSOR_NAND_PGS_MASK) {
 	case CSOR_NAND_PGS_512:
-		if (chip->options & NAND_BUSWIDTH_16) {
-			layout = &oob_512_16bit_ecc4;
-		} else {
-			layout = &oob_512_8bit_ecc4;
-
+		if (!(chip->options & NAND_BUSWIDTH_16)) {
 			/* Avoid conflict with bad block marker */
 			bbt_main_descr.offs = 0;
 			bbt_mirror_descr.offs = 0;
@@ -942,35 +863,16 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
 		break;
 
 	case CSOR_NAND_PGS_2K:
-		layout = &oob_2048_ecc4;
 		priv->bufnum_mask = 3;
 		break;
 
 	case CSOR_NAND_PGS_4K:
-		if ((csor & CSOR_NAND_ECC_MODE_MASK) ==
-		    CSOR_NAND_ECC_MODE_4) {
-			layout = &oob_4096_ecc4;
-		} else {
-			layout = &oob_4096_ecc8;
-			chip->ecc.bytes = 16;
-			chip->ecc.strength = 8;
-		}
-
 		priv->bufnum_mask = 1;
 		break;
 
 	case CSOR_NAND_PGS_8K:
-		if ((csor & CSOR_NAND_ECC_MODE_MASK) ==
-		    CSOR_NAND_ECC_MODE_4) {
-			layout = &oob_8192_ecc4;
-		} else {
-			layout = &oob_8192_ecc8;
-			chip->ecc.bytes = 16;
-			chip->ecc.strength = 8;
-		}
-
 		priv->bufnum_mask = 0;
-	break;
+		break;
 
 	default:
 		dev_err(priv->dev, "bad csor %#x: bad page size\n", csor);
@@ -980,9 +882,20 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
 	/* Must also set CSOR_NAND_ECC_ENC_EN if DEC_EN set */
 	if (csor & CSOR_NAND_ECC_DEC_EN) {
 		chip->ecc.mode = NAND_ECC_HW;
-		chip->ecc.layout = layout;
+		mtd_set_ooblayout(mtd, &fsl_ifc_ooblayout_ops);
+
+		/* Hardware generates ECC per 512 Bytes */
+		chip->ecc.size = 512;
+		if ((csor & CSOR_NAND_ECC_MODE_MASK) == CSOR_NAND_ECC_MODE_4) {
+			chip->ecc.bytes = 8;
+			chip->ecc.strength = 4;
+		} else {
+			chip->ecc.bytes = 16;
+			chip->ecc.strength = 8;
+		}
 	} else {
 		chip->ecc.mode = NAND_ECC_SOFT;
+		chip->ecc.algo = NAND_ECC_HAMMING;
 	}
 
 	if (ctrl->version == FSL_IFC_VERSION_1_1_0)
@@ -1007,10 +920,10 @@ static int fsl_ifc_chip_remove(struct fsl_ifc_mtd *priv)
 	return 0;
 }
 
-static int match_bank(struct fsl_ifc_regs __iomem *ifc, int bank,
+static int match_bank(struct fsl_ifc_global __iomem *ifc_global, int bank,
 		      phys_addr_t addr)
 {
-	u32 cspr = ifc_in32(&ifc->cspr_cs[bank].cspr);
+	u32 cspr = ifc_in32(&ifc_global->cspr_cs[bank].cspr);
 
 	if (!(cspr & CSPR_V))
 		return 0;
@@ -1024,7 +937,7 @@ static DEFINE_MUTEX(fsl_ifc_nand_mutex);
 
 static int fsl_ifc_nand_probe(struct platform_device *dev)
 {
-	struct fsl_ifc_regs __iomem *ifc;
+	struct fsl_ifc_runtime __iomem *ifc;
 	struct fsl_ifc_mtd *priv;
 	struct resource res;
 	static const char *part_probe_types[]
@@ -1034,9 +947,9 @@ static int fsl_ifc_nand_probe(struct platform_device *dev)
 	struct device_node *node = dev->dev.of_node;
 	struct mtd_info *mtd;
 
-	if (!fsl_ifc_ctrl_dev || !fsl_ifc_ctrl_dev->regs)
+	if (!fsl_ifc_ctrl_dev || !fsl_ifc_ctrl_dev->rregs)
 		return -ENODEV;
-	ifc = fsl_ifc_ctrl_dev->regs;
+	ifc = fsl_ifc_ctrl_dev->rregs;
 
 	/* get, allocate and map the memory resource */
 	ret = of_address_to_resource(node, 0, &res);
@@ -1047,7 +960,7 @@ static int fsl_ifc_nand_probe(struct platform_device *dev)
 
 	/* find which chip select it is connected to */
 	for (bank = 0; bank < fsl_ifc_ctrl_dev->banks; bank++) {
-		if (match_bank(ifc, bank, res.start))
+		if (match_bank(fsl_ifc_ctrl_dev->gregs, bank, res.start))
 			break;
 	}
 
diff --git a/drivers/mtd/nand/fsl_upm.c b/drivers/mtd/nand/fsl_upm.c
index cafd12d..d85fa25 100644
--- a/drivers/mtd/nand/fsl_upm.c
+++ b/drivers/mtd/nand/fsl_upm.c
@@ -170,6 +170,7 @@ static int fun_chip_init(struct fsl_upm_nand *fun,
 	fun->chip.read_buf = fun_read_buf;
 	fun->chip.write_buf = fun_write_buf;
 	fun->chip.ecc.mode = NAND_ECC_SOFT;
+	fun->chip.ecc.algo = NAND_ECC_HAMMING;
 	if (fun->mchip_count > 1)
 		fun->chip.select_chip = fun_select_chip;
 
diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c
index 1bdcd4f..d4f454a 100644
--- a/drivers/mtd/nand/fsmc_nand.c
+++ b/drivers/mtd/nand/fsmc_nand.c
@@ -39,210 +39,41 @@
 #include <linux/amba/bus.h>
 #include <mtd/mtd-abi.h>
 
-static struct nand_ecclayout fsmc_ecc1_128_layout = {
-	.eccbytes = 24,
-	.eccpos = {2, 3, 4, 18, 19, 20, 34, 35, 36, 50, 51, 52,
-		66, 67, 68, 82, 83, 84, 98, 99, 100, 114, 115, 116},
-	.oobfree = {
-		{.offset = 8, .length = 8},
-		{.offset = 24, .length = 8},
-		{.offset = 40, .length = 8},
-		{.offset = 56, .length = 8},
-		{.offset = 72, .length = 8},
-		{.offset = 88, .length = 8},
-		{.offset = 104, .length = 8},
-		{.offset = 120, .length = 8}
-	}
-};
+static int fsmc_ecc1_ooblayout_ecc(struct mtd_info *mtd, int section,
+				   struct mtd_oob_region *oobregion)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
 
-static struct nand_ecclayout fsmc_ecc1_64_layout = {
-	.eccbytes = 12,
-	.eccpos = {2, 3, 4, 18, 19, 20, 34, 35, 36, 50, 51, 52},
-	.oobfree = {
-		{.offset = 8, .length = 8},
-		{.offset = 24, .length = 8},
-		{.offset = 40, .length = 8},
-		{.offset = 56, .length = 8},
-	}
-};
+	if (section >= chip->ecc.steps)
+		return -ERANGE;
 
-static struct nand_ecclayout fsmc_ecc1_16_layout = {
-	.eccbytes = 3,
-	.eccpos = {2, 3, 4},
-	.oobfree = {
-		{.offset = 8, .length = 8},
-	}
-};
+	oobregion->offset = (section * 16) + 2;
+	oobregion->length = 3;
 
-/*
- * ECC4 layout for NAND of pagesize 8192 bytes & OOBsize 256 bytes. 13*16 bytes
- * of OB size is reserved for ECC, Byte no. 0 & 1 reserved for bad block and 46
- * bytes are free for use.
- */
-static struct nand_ecclayout fsmc_ecc4_256_layout = {
-	.eccbytes = 208,
-	.eccpos = {  2,   3,   4,   5,   6,   7,   8,
-		9,  10,  11,  12,  13,  14,
-		18,  19,  20,  21,  22,  23,  24,
-		25,  26,  27,  28,  29,  30,
-		34,  35,  36,  37,  38,  39,  40,
-		41,  42,  43,  44,  45,  46,
-		50,  51,  52,  53,  54,  55,  56,
-		57,  58,  59,  60,  61,  62,
-		66,  67,  68,  69,  70,  71,  72,
-		73,  74,  75,  76,  77,  78,
-		82,  83,  84,  85,  86,  87,  88,
-		89,  90,  91,  92,  93,  94,
-		98,  99, 100, 101, 102, 103, 104,
-		105, 106, 107, 108, 109, 110,
-		114, 115, 116, 117, 118, 119, 120,
-		121, 122, 123, 124, 125, 126,
-		130, 131, 132, 133, 134, 135, 136,
-		137, 138, 139, 140, 141, 142,
-		146, 147, 148, 149, 150, 151, 152,
-		153, 154, 155, 156, 157, 158,
-		162, 163, 164, 165, 166, 167, 168,
-		169, 170, 171, 172, 173, 174,
-		178, 179, 180, 181, 182, 183, 184,
-		185, 186, 187, 188, 189, 190,
-		194, 195, 196, 197, 198, 199, 200,
-		201, 202, 203, 204, 205, 206,
-		210, 211, 212, 213, 214, 215, 216,
-		217, 218, 219, 220, 221, 222,
-		226, 227, 228, 229, 230, 231, 232,
-		233, 234, 235, 236, 237, 238,
-		242, 243, 244, 245, 246, 247, 248,
-		249, 250, 251, 252, 253, 254
-	},
-	.oobfree = {
-		{.offset = 15, .length = 3},
-		{.offset = 31, .length = 3},
-		{.offset = 47, .length = 3},
-		{.offset = 63, .length = 3},
-		{.offset = 79, .length = 3},
-		{.offset = 95, .length = 3},
-		{.offset = 111, .length = 3},
-		{.offset = 127, .length = 3},
-		{.offset = 143, .length = 3},
-		{.offset = 159, .length = 3},
-		{.offset = 175, .length = 3},
-		{.offset = 191, .length = 3},
-		{.offset = 207, .length = 3},
-		{.offset = 223, .length = 3},
-		{.offset = 239, .length = 3},
-		{.offset = 255, .length = 1}
-	}
-};
+	return 0;
+}
 
-/*
- * ECC4 layout for NAND of pagesize 4096 bytes & OOBsize 224 bytes. 13*8 bytes
- * of OOB size is reserved for ECC, Byte no. 0 & 1 reserved for bad block & 118
- * bytes are free for use.
- */
-static struct nand_ecclayout fsmc_ecc4_224_layout = {
-	.eccbytes = 104,
-	.eccpos = {  2,   3,   4,   5,   6,   7,   8,
-		9,  10,  11,  12,  13,  14,
-		18,  19,  20,  21,  22,  23,  24,
-		25,  26,  27,  28,  29,  30,
-		34,  35,  36,  37,  38,  39,  40,
-		41,  42,  43,  44,  45,  46,
-		50,  51,  52,  53,  54,  55,  56,
-		57,  58,  59,  60,  61,  62,
-		66,  67,  68,  69,  70,  71,  72,
-		73,  74,  75,  76,  77,  78,
-		82,  83,  84,  85,  86,  87,  88,
-		89,  90,  91,  92,  93,  94,
-		98,  99, 100, 101, 102, 103, 104,
-		105, 106, 107, 108, 109, 110,
-		114, 115, 116, 117, 118, 119, 120,
-		121, 122, 123, 124, 125, 126
-	},
-	.oobfree = {
-		{.offset = 15, .length = 3},
-		{.offset = 31, .length = 3},
-		{.offset = 47, .length = 3},
-		{.offset = 63, .length = 3},
-		{.offset = 79, .length = 3},
-		{.offset = 95, .length = 3},
-		{.offset = 111, .length = 3},
-		{.offset = 127, .length = 97}
-	}
-};
+static int fsmc_ecc1_ooblayout_free(struct mtd_info *mtd, int section,
+				    struct mtd_oob_region *oobregion)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
 
-/*
- * ECC4 layout for NAND of pagesize 4096 bytes & OOBsize 128 bytes. 13*8 bytes
- * of OOB size is reserved for ECC, Byte no. 0 & 1 reserved for bad block & 22
- * bytes are free for use.
- */
-static struct nand_ecclayout fsmc_ecc4_128_layout = {
-	.eccbytes = 104,
-	.eccpos = {  2,   3,   4,   5,   6,   7,   8,
-		9,  10,  11,  12,  13,  14,
-		18,  19,  20,  21,  22,  23,  24,
-		25,  26,  27,  28,  29,  30,
-		34,  35,  36,  37,  38,  39,  40,
-		41,  42,  43,  44,  45,  46,
-		50,  51,  52,  53,  54,  55,  56,
-		57,  58,  59,  60,  61,  62,
-		66,  67,  68,  69,  70,  71,  72,
-		73,  74,  75,  76,  77,  78,
-		82,  83,  84,  85,  86,  87,  88,
-		89,  90,  91,  92,  93,  94,
-		98,  99, 100, 101, 102, 103, 104,
-		105, 106, 107, 108, 109, 110,
-		114, 115, 116, 117, 118, 119, 120,
-		121, 122, 123, 124, 125, 126
-	},
-	.oobfree = {
-		{.offset = 15, .length = 3},
-		{.offset = 31, .length = 3},
-		{.offset = 47, .length = 3},
-		{.offset = 63, .length = 3},
-		{.offset = 79, .length = 3},
-		{.offset = 95, .length = 3},
-		{.offset = 111, .length = 3},
-		{.offset = 127, .length = 1}
-	}
-};
+	if (section >= chip->ecc.steps)
+		return -ERANGE;
 
-/*
- * ECC4 layout for NAND of pagesize 2048 bytes & OOBsize 64 bytes. 13*4 bytes of
- * OOB size is reserved for ECC, Byte no. 0 & 1 reserved for bad block and 10
- * bytes are free for use.
- */
-static struct nand_ecclayout fsmc_ecc4_64_layout = {
-	.eccbytes = 52,
-	.eccpos = {  2,   3,   4,   5,   6,   7,   8,
-		9,  10,  11,  12,  13,  14,
-		18,  19,  20,  21,  22,  23,  24,
-		25,  26,  27,  28,  29,  30,
-		34,  35,  36,  37,  38,  39,  40,
-		41,  42,  43,  44,  45,  46,
-		50,  51,  52,  53,  54,  55,  56,
-		57,  58,  59,  60,  61,  62,
-	},
-	.oobfree = {
-		{.offset = 15, .length = 3},
-		{.offset = 31, .length = 3},
-		{.offset = 47, .length = 3},
-		{.offset = 63, .length = 1},
-	}
-};
+	oobregion->offset = (section * 16) + 8;
 
-/*
- * ECC4 layout for NAND of pagesize 512 bytes & OOBsize 16 bytes. 13 bytes of
- * OOB size is reserved for ECC, Byte no. 4 & 5 reserved for bad block and One
- * byte is free for use.
- */
-static struct nand_ecclayout fsmc_ecc4_16_layout = {
-	.eccbytes = 13,
-	.eccpos = { 0,  1,  2,  3,  6,  7, 8,
-		9, 10, 11, 12, 13, 14
-	},
-	.oobfree = {
-		{.offset = 15, .length = 1},
-	}
+	if (section < chip->ecc.steps - 1)
+		oobregion->length = 8;
+	else
+		oobregion->length = mtd->oobsize - oobregion->offset;
+
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops fsmc_ecc1_ooblayout_ops = {
+	.ecc = fsmc_ecc1_ooblayout_ecc,
+	.free = fsmc_ecc1_ooblayout_free,
 };
 
 /*
@@ -250,28 +81,46 @@ static struct nand_ecclayout fsmc_ecc4_16_layout = {
  * There are 13 bytes of ecc for every 512 byte block and it has to be read
  * consecutively and immediately after the 512 byte data block for hardware to
  * generate the error bit offsets in 512 byte data.
- * Managing the ecc bytes in the following way makes it easier for software to
- * read ecc bytes consecutive to data bytes. This way is similar to
- * oobfree structure maintained already in generic nand driver
  */
-static struct fsmc_eccplace fsmc_ecc4_lp_place = {
-	.eccplace = {
-		{.offset = 2, .length = 13},
-		{.offset = 18, .length = 13},
-		{.offset = 34, .length = 13},
-		{.offset = 50, .length = 13},
-		{.offset = 66, .length = 13},
-		{.offset = 82, .length = 13},
-		{.offset = 98, .length = 13},
-		{.offset = 114, .length = 13}
-	}
-};
+static int fsmc_ecc4_ooblayout_ecc(struct mtd_info *mtd, int section,
+				   struct mtd_oob_region *oobregion)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
 
-static struct fsmc_eccplace fsmc_ecc4_sp_place = {
-	.eccplace = {
-		{.offset = 0, .length = 4},
-		{.offset = 6, .length = 9}
-	}
+	if (section >= chip->ecc.steps)
+		return -ERANGE;
+
+	oobregion->length = chip->ecc.bytes;
+
+	if (!section && mtd->writesize <= 512)
+		oobregion->offset = 0;
+	else
+		oobregion->offset = (section * 16) + 2;
+
+	return 0;
+}
+
+static int fsmc_ecc4_ooblayout_free(struct mtd_info *mtd, int section,
+				    struct mtd_oob_region *oobregion)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
+
+	if (section >= chip->ecc.steps)
+		return -ERANGE;
+
+	oobregion->offset = (section * 16) + 15;
+
+	if (section < chip->ecc.steps - 1)
+		oobregion->length = 3;
+	else
+		oobregion->length = mtd->oobsize - oobregion->offset;
+
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops fsmc_ecc4_ooblayout_ops = {
+	.ecc = fsmc_ecc4_ooblayout_ecc,
+	.free = fsmc_ecc4_ooblayout_free,
 };
 
 /**
@@ -283,7 +132,6 @@ static struct fsmc_eccplace fsmc_ecc4_sp_place = {
  * @partitions:		Partition info for a NAND Flash.
  * @nr_partitions:	Total number of partition of a NAND flash.
  *
- * @ecc_place:		ECC placing locations in oobfree type format.
  * @bank:		Bank number for probed device.
  * @clk:		Clock structure for FSMC.
  *
@@ -303,7 +151,6 @@ struct fsmc_nand_data {
 	struct mtd_partition	*partitions;
 	unsigned int		nr_partitions;
 
-	struct fsmc_eccplace	*ecc_place;
 	unsigned int		bank;
 	struct device		*dev;
 	enum access_mode	mode;
@@ -710,8 +557,6 @@ static void fsmc_write_buf_dma(struct mtd_info *mtd, const uint8_t *buf,
 static int fsmc_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
 				 uint8_t *buf, int oob_required, int page)
 {
-	struct fsmc_nand_data *host = mtd_to_fsmc(mtd);
-	struct fsmc_eccplace *ecc_place = host->ecc_place;
 	int i, j, s, stat, eccsize = chip->ecc.size;
 	int eccbytes = chip->ecc.bytes;
 	int eccsteps = chip->ecc.steps;
@@ -734,9 +579,15 @@ static int fsmc_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
 		chip->read_buf(mtd, p, eccsize);
 
 		for (j = 0; j < eccbytes;) {
-			off = ecc_place->eccplace[group].offset;
-			len = ecc_place->eccplace[group].length;
-			group++;
+			struct mtd_oob_region oobregion;
+			int ret;
+
+			ret = mtd_ooblayout_ecc(mtd, group++, &oobregion);
+			if (ret)
+				return ret;
+
+			off = oobregion.offset;
+			len = oobregion.length;
 
 			/*
 			 * length is intentionally kept a higher multiple of 2
@@ -1084,24 +935,10 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
 	if (AMBA_REV_BITS(host->pid) >= 8) {
 		switch (mtd->oobsize) {
 		case 16:
-			nand->ecc.layout = &fsmc_ecc4_16_layout;
-			host->ecc_place = &fsmc_ecc4_sp_place;
-			break;
 		case 64:
-			nand->ecc.layout = &fsmc_ecc4_64_layout;
-			host->ecc_place = &fsmc_ecc4_lp_place;
-			break;
 		case 128:
-			nand->ecc.layout = &fsmc_ecc4_128_layout;
-			host->ecc_place = &fsmc_ecc4_lp_place;
-			break;
 		case 224:
-			nand->ecc.layout = &fsmc_ecc4_224_layout;
-			host->ecc_place = &fsmc_ecc4_lp_place;
-			break;
 		case 256:
-			nand->ecc.layout = &fsmc_ecc4_256_layout;
-			host->ecc_place = &fsmc_ecc4_lp_place;
 			break;
 		default:
 			dev_warn(&pdev->dev, "No oob scheme defined for oobsize %d\n",
@@ -1109,6 +946,8 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
 			ret = -EINVAL;
 			goto err_probe;
 		}
+
+		mtd_set_ooblayout(mtd, &fsmc_ecc4_ooblayout_ops);
 	} else {
 		switch (nand->ecc.mode) {
 		case NAND_ECC_HW:
@@ -1119,9 +958,11 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
 			nand->ecc.strength = 1;
 			break;
 
-		case NAND_ECC_SOFT_BCH:
-			dev_info(&pdev->dev, "Using 4-bit SW BCH ECC scheme\n");
-			break;
+		case NAND_ECC_SOFT:
+			if (nand->ecc.algo == NAND_ECC_BCH) {
+				dev_info(&pdev->dev, "Using 4-bit SW BCH ECC scheme\n");
+				break;
+			}
 
 		default:
 			dev_err(&pdev->dev, "Unsupported ECC mode!\n");
@@ -1132,16 +973,13 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
 		 * Don't set layout for BCH4 SW ECC. This will be
 		 * generated later in nand_bch_init() later.
 		 */
-		if (nand->ecc.mode != NAND_ECC_SOFT_BCH) {
+		if (nand->ecc.mode == NAND_ECC_HW) {
 			switch (mtd->oobsize) {
 			case 16:
-				nand->ecc.layout = &fsmc_ecc1_16_layout;
-				break;
 			case 64:
-				nand->ecc.layout = &fsmc_ecc1_64_layout;
-				break;
 			case 128:
-				nand->ecc.layout = &fsmc_ecc1_128_layout;
+				mtd_set_ooblayout(mtd,
+						  &fsmc_ecc1_ooblayout_ops);
 				break;
 			default:
 				dev_warn(&pdev->dev,
diff --git a/drivers/mtd/nand/gpio.c b/drivers/mtd/nand/gpio.c
index ded658f..6317f68 100644
--- a/drivers/mtd/nand/gpio.c
+++ b/drivers/mtd/nand/gpio.c
@@ -273,6 +273,7 @@ static int gpio_nand_probe(struct platform_device *pdev)
 	nand_set_flash_node(chip, pdev->dev.of_node);
 	chip->IO_ADDR_W		= chip->IO_ADDR_R;
 	chip->ecc.mode		= NAND_ECC_SOFT;
+	chip->ecc.algo		= NAND_ECC_HAMMING;
 	chip->options		= gpiomtd->plat.options;
 	chip->chip_delay	= gpiomtd->plat.chip_delay;
 	chip->cmd_ctrl		= gpio_nand_cmd_ctrl;
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index 8122c69..6e46156 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -25,7 +25,6 @@
 #include <linux/mtd/partitions.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
-#include <linux/of_mtd.h>
 #include "gpmi-nand.h"
 #include "bch-regs.h"
 
@@ -47,10 +46,44 @@ static struct nand_bbt_descr gpmi_bbt_descr = {
  * We may change the layout if we can get the ECC info from the datasheet,
  * else we will use all the (page + OOB).
  */
-static struct nand_ecclayout gpmi_hw_ecclayout = {
-	.eccbytes = 0,
-	.eccpos = { 0, },
-	.oobfree = { {.offset = 0, .length = 0} }
+static int gpmi_ooblayout_ecc(struct mtd_info *mtd, int section,
+			      struct mtd_oob_region *oobregion)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
+	struct gpmi_nand_data *this = nand_get_controller_data(chip);
+	struct bch_geometry *geo = &this->bch_geometry;
+
+	if (section)
+		return -ERANGE;
+
+	oobregion->offset = 0;
+	oobregion->length = geo->page_size - mtd->writesize;
+
+	return 0;
+}
+
+static int gpmi_ooblayout_free(struct mtd_info *mtd, int section,
+			       struct mtd_oob_region *oobregion)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
+	struct gpmi_nand_data *this = nand_get_controller_data(chip);
+	struct bch_geometry *geo = &this->bch_geometry;
+
+	if (section)
+		return -ERANGE;
+
+	/* The available oob size we have. */
+	if (geo->page_size < mtd->writesize + mtd->oobsize) {
+		oobregion->offset = geo->page_size - mtd->writesize;
+		oobregion->length = mtd->oobsize - oobregion->offset;
+	}
+
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops gpmi_ooblayout_ops = {
+	.ecc = gpmi_ooblayout_ecc,
+	.free = gpmi_ooblayout_free,
 };
 
 static const struct gpmi_devdata gpmi_devdata_imx23 = {
@@ -141,7 +174,6 @@ static int set_geometry_by_ecc_info(struct gpmi_nand_data *this)
 	struct bch_geometry *geo = &this->bch_geometry;
 	struct nand_chip *chip = &this->nand;
 	struct mtd_info *mtd = nand_to_mtd(chip);
-	struct nand_oobfree *of = gpmi_hw_ecclayout.oobfree;
 	unsigned int block_mark_bit_offset;
 
 	if (!(chip->ecc_strength_ds > 0 && chip->ecc_step_ds > 0))
@@ -229,12 +261,6 @@ static int set_geometry_by_ecc_info(struct gpmi_nand_data *this)
 	geo->page_size = mtd->writesize + geo->metadata_size +
 		(geo->gf_len * geo->ecc_strength * geo->ecc_chunk_count) / 8;
 
-	/* The available oob size we have. */
-	if (geo->page_size < mtd->writesize + mtd->oobsize) {
-		of->offset = geo->page_size - mtd->writesize;
-		of->length = mtd->oobsize - of->offset;
-	}
-
 	geo->payload_size = mtd->writesize;
 
 	geo->auxiliary_status_offset = ALIGN(geo->metadata_size, 4);
@@ -797,6 +823,7 @@ static void gpmi_free_dma_buffer(struct gpmi_nand_data *this)
 
 	this->cmd_buffer	= NULL;
 	this->data_buffer_dma	= NULL;
+	this->raw_buffer	= NULL;
 	this->page_buffer_virt	= NULL;
 	this->page_buffer_size	=  0;
 }
@@ -1037,14 +1064,87 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
 	/* Loop over status bytes, accumulating ECC status. */
 	status = auxiliary_virt + nfc_geo->auxiliary_status_offset;
 
+	read_page_swap_end(this, buf, nfc_geo->payload_size,
+			   this->payload_virt, this->payload_phys,
+			   nfc_geo->payload_size,
+			   payload_virt, payload_phys);
+
 	for (i = 0; i < nfc_geo->ecc_chunk_count; i++, status++) {
 		if ((*status == STATUS_GOOD) || (*status == STATUS_ERASED))
 			continue;
 
 		if (*status == STATUS_UNCORRECTABLE) {
+			int eccbits = nfc_geo->ecc_strength * nfc_geo->gf_len;
+			u8 *eccbuf = this->raw_buffer;
+			int offset, bitoffset;
+			int eccbytes;
+			int flips;
+
+			/* Read ECC bytes into our internal raw_buffer */
+			offset = nfc_geo->metadata_size * 8;
+			offset += ((8 * nfc_geo->ecc_chunk_size) + eccbits) * (i + 1);
+			offset -= eccbits;
+			bitoffset = offset % 8;
+			eccbytes = DIV_ROUND_UP(offset + eccbits, 8);
+			offset /= 8;
+			eccbytes -= offset;
+			chip->cmdfunc(mtd, NAND_CMD_RNDOUT, offset, -1);
+			chip->read_buf(mtd, eccbuf, eccbytes);
+
+			/*
+			 * ECC data are not byte aligned and we may have
+			 * in-band data in the first and last byte of
+			 * eccbuf. Set non-eccbits to one so that
+			 * nand_check_erased_ecc_chunk() does not count them
+			 * as bitflips.
+			 */
+			if (bitoffset)
+				eccbuf[0] |= GENMASK(bitoffset - 1, 0);
+
+			bitoffset = (bitoffset + eccbits) % 8;
+			if (bitoffset)
+				eccbuf[eccbytes - 1] |= GENMASK(7, bitoffset);
+
+			/*
+			 * The ECC hardware has an uncorrectable ECC status
+			 * code in case we have bitflips in an erased page. As
+			 * nothing was written into this subpage the ECC is
+			 * obviously wrong and we can not trust it. We assume
+			 * at this point that we are reading an erased page and
+			 * try to correct the bitflips in buffer up to
+			 * ecc_strength bitflips. If this is a page with random
+			 * data, we exceed this number of bitflips and have a
+			 * ECC failure. Otherwise we use the corrected buffer.
+			 */
+			if (i == 0) {
+				/* The first block includes metadata */
+				flips = nand_check_erased_ecc_chunk(
+						buf + i * nfc_geo->ecc_chunk_size,
+						nfc_geo->ecc_chunk_size,
+						eccbuf, eccbytes,
+						auxiliary_virt,
+						nfc_geo->metadata_size,
+						nfc_geo->ecc_strength);
+			} else {
+				flips = nand_check_erased_ecc_chunk(
+						buf + i * nfc_geo->ecc_chunk_size,
+						nfc_geo->ecc_chunk_size,
+						eccbuf, eccbytes,
+						NULL, 0,
+						nfc_geo->ecc_strength);
+			}
+
+			if (flips > 0) {
+				max_bitflips = max_t(unsigned int, max_bitflips,
+						     flips);
+				mtd->ecc_stats.corrected += flips;
+				continue;
+			}
+
 			mtd->ecc_stats.failed++;
 			continue;
 		}
+
 		mtd->ecc_stats.corrected += *status;
 		max_bitflips = max_t(unsigned int, max_bitflips, *status);
 	}
@@ -1064,11 +1164,6 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
 		chip->oob_poi[0] = ((uint8_t *) auxiliary_virt)[0];
 	}
 
-	read_page_swap_end(this, buf, nfc_geo->payload_size,
-			this->payload_virt, this->payload_phys,
-			nfc_geo->payload_size,
-			payload_virt, payload_phys);
-
 	return max_bitflips;
 }
 
@@ -1327,18 +1422,19 @@ static int gpmi_ecc_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
 static int
 gpmi_ecc_write_oob(struct mtd_info *mtd, struct nand_chip *chip, int page)
 {
-	struct nand_oobfree *of = mtd->ecclayout->oobfree;
+	struct mtd_oob_region of = { };
 	int status = 0;
 
 	/* Do we have available oob area? */
-	if (!of->length)
+	mtd_ooblayout_free(mtd, 0, &of);
+	if (!of.length)
 		return -EPERM;
 
 	if (!nand_is_slc(chip))
 		return -EPERM;
 
-	chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize + of->offset, page);
-	chip->write_buf(mtd, chip->oob_poi + of->offset, of->length);
+	chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize + of.offset, page);
+	chip->write_buf(mtd, chip->oob_poi + of.offset, of.length);
 	chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
 
 	status = chip->waitfunc(mtd, chip);
@@ -1840,6 +1936,7 @@ static void gpmi_nand_exit(struct gpmi_nand_data *this)
 static int gpmi_init_last(struct gpmi_nand_data *this)
 {
 	struct nand_chip *chip = &this->nand;
+	struct mtd_info *mtd = nand_to_mtd(chip);
 	struct nand_ecc_ctrl *ecc = &chip->ecc;
 	struct bch_geometry *bch_geo = &this->bch_geometry;
 	int ret;
@@ -1861,7 +1958,7 @@ static int gpmi_init_last(struct gpmi_nand_data *this)
 	ecc->mode	= NAND_ECC_HW;
 	ecc->size	= bch_geo->ecc_chunk_size;
 	ecc->strength	= bch_geo->ecc_strength;
-	ecc->layout	= &gpmi_hw_ecclayout;
+	mtd_set_ooblayout(mtd, &gpmi_ooblayout_ops);
 
 	/*
 	 * We only enable the subpage read when:
@@ -1914,16 +2011,6 @@ static int gpmi_nand_init(struct gpmi_nand_data *this)
 	/* Set up swap_block_mark, must be set before the gpmi_set_geometry() */
 	this->swap_block_mark = !GPMI_IS_MX23(this);
 
-	if (of_get_nand_on_flash_bbt(this->dev->of_node)) {
-		chip->bbt_options |= NAND_BBT_USE_FLASH | NAND_BBT_NO_OOB;
-
-		if (of_property_read_bool(this->dev->of_node,
-						"fsl,no-blockmark-swap"))
-			this->swap_block_mark = false;
-	}
-	dev_dbg(this->dev, "Blockmark swapping %sabled\n",
-		this->swap_block_mark ? "en" : "dis");
-
 	/*
 	 * Allocate a temporary DMA buffer for reading ID in the
 	 * nand_scan_ident().
@@ -1938,6 +2025,16 @@ static int gpmi_nand_init(struct gpmi_nand_data *this)
 	if (ret)
 		goto err_out;
 
+	if (chip->bbt_options & NAND_BBT_USE_FLASH) {
+		chip->bbt_options |= NAND_BBT_NO_OOB;
+
+		if (of_property_read_bool(this->dev->of_node,
+						"fsl,no-blockmark-swap"))
+			this->swap_block_mark = false;
+	}
+	dev_dbg(this->dev, "Blockmark swapping %sabled\n",
+		this->swap_block_mark ? "en" : "dis");
+
 	ret = gpmi_init_last(this);
 	if (ret)
 		goto err_out;
diff --git a/drivers/mtd/nand/hisi504_nand.c b/drivers/mtd/nand/hisi504_nand.c
index 96502b6..9432546 100644
--- a/drivers/mtd/nand/hisi504_nand.c
+++ b/drivers/mtd/nand/hisi504_nand.c
@@ -19,7 +19,6 @@
  * GNU General Public License for more details.
  */
 #include <linux/of.h>
-#include <linux/of_mtd.h>
 #include <linux/mtd/mtd.h>
 #include <linux/sizes.h>
 #include <linux/clk.h>
@@ -631,8 +630,28 @@ static void hisi_nfc_host_init(struct hinfc_host *host)
 	hinfc_write(host, HINFC504_INTEN_DMA, HINFC504_INTEN);
 }
 
-static struct nand_ecclayout nand_ecc_2K_16bits = {
-	.oobfree = { {2, 6} },
+static int hisi_ooblayout_ecc(struct mtd_info *mtd, int section,
+			      struct mtd_oob_region *oobregion)
+{
+	/* FIXME: add ECC bytes position */
+	return -ENOTSUPP;
+}
+
+static int hisi_ooblayout_free(struct mtd_info *mtd, int section,
+			       struct mtd_oob_region *oobregion)
+{
+	if (section)
+		return -ERANGE;
+
+	oobregion->offset = 2;
+	oobregion->length = 6;
+
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops hisi_ooblayout_ops = {
+	.ecc = hisi_ooblayout_ecc,
+	.free = hisi_ooblayout_free,
 };
 
 static int hisi_nfc_ecc_probe(struct hinfc_host *host)
@@ -642,10 +661,9 @@ static int hisi_nfc_ecc_probe(struct hinfc_host *host)
 	struct device *dev = host->dev;
 	struct nand_chip *chip = &host->chip;
 	struct mtd_info *mtd = nand_to_mtd(chip);
-	struct device_node *np = host->dev->of_node;
 
-	size = of_get_nand_ecc_step_size(np);
-	strength = of_get_nand_ecc_strength(np);
+	size = chip->ecc.size;
+	strength = chip->ecc.strength;
 	if (size != 1024) {
 		dev_err(dev, "error ecc size: %d\n", size);
 		return -EINVAL;
@@ -668,7 +686,7 @@ static int hisi_nfc_ecc_probe(struct hinfc_host *host)
 	case 16:
 		ecc_bits = 6;
 		if (mtd->writesize == 2048)
-			chip->ecc.layout = &nand_ecc_2K_16bits;
+			mtd_set_ooblayout(mtd, &hisi_ooblayout_ops);
 
 		/* TODO: add more page size support */
 		break;
@@ -695,7 +713,7 @@ static int hisi_nfc_ecc_probe(struct hinfc_host *host)
 
 static int hisi_nfc_probe(struct platform_device *pdev)
 {
-	int ret = 0, irq, buswidth, flag, max_chips = HINFC504_MAX_CHIP;
+	int ret = 0, irq, flag, max_chips = HINFC504_MAX_CHIP;
 	struct device *dev = &pdev->dev;
 	struct hinfc_host *host;
 	struct nand_chip  *chip;
@@ -747,12 +765,6 @@ static int hisi_nfc_probe(struct platform_device *pdev)
 	chip->read_buf		= hisi_nfc_read_buf;
 	chip->chip_delay	= HINFC504_CHIP_DELAY;
 
-	chip->ecc.mode = of_get_nand_ecc_mode(np);
-
-	buswidth = of_get_nand_bus_width(np);
-	if (buswidth == 16)
-		chip->options |= NAND_BUSWIDTH_16;
-
 	hisi_nfc_host_init(host);
 
 	ret = devm_request_irq(dev, irq, hinfc_irq_handle, 0x0, "nandc", host);
diff --git a/drivers/mtd/nand/jz4740_nand.c b/drivers/mtd/nand/jz4740_nand.c
index 673ceb2..5551c36 100644
--- a/drivers/mtd/nand/jz4740_nand.c
+++ b/drivers/mtd/nand/jz4740_nand.c
@@ -221,7 +221,6 @@ static int jz_nand_correct_ecc_rs(struct mtd_info *mtd, uint8_t *dat,
 	struct jz_nand *nand = mtd_to_jz_nand(mtd);
 	int i, error_count, index;
 	uint32_t reg, status, error;
-	uint32_t t;
 	unsigned int timeout = 1000;
 
 	for (i = 0; i < 9; ++i)
@@ -476,7 +475,7 @@ static int jz_nand_probe(struct platform_device *pdev)
 	}
 
 	if (pdata && pdata->ident_callback) {
-		pdata->ident_callback(pdev, chip, &pdata->partitions,
+		pdata->ident_callback(pdev, mtd, &pdata->partitions,
 					&pdata->num_partitions);
 	}
 
diff --git a/drivers/mtd/nand/jz4780_bch.c b/drivers/mtd/nand/jz4780_bch.c
index 755499c..d74f4ba 100644
--- a/drivers/mtd/nand/jz4780_bch.c
+++ b/drivers/mtd/nand/jz4780_bch.c
@@ -287,7 +287,6 @@ static struct jz4780_bch *jz4780_bch_get(struct device_node *np)
 	bch = platform_get_drvdata(pdev);
 	clk_prepare_enable(bch->clk);
 
-	bch->dev = &pdev->dev;
 	return bch;
 }
 
diff --git a/drivers/mtd/nand/jz4780_nand.c b/drivers/mtd/nand/jz4780_nand.c
index e1c016c..daf3c42 100644
--- a/drivers/mtd/nand/jz4780_nand.c
+++ b/drivers/mtd/nand/jz4780_nand.c
@@ -17,7 +17,6 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/gpio/consumer.h>
-#include <linux/of_mtd.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/mtd/mtd.h>
@@ -56,8 +55,6 @@ struct jz4780_nand_chip {
 	struct nand_chip chip;
 	struct list_head chip_list;
 
-	struct nand_ecclayout ecclayout;
-
 	struct gpio_desc *busy_gpio;
 	struct gpio_desc *wp_gpio;
 	unsigned int reading: 1;
@@ -165,8 +162,7 @@ static int jz4780_nand_init_ecc(struct jz4780_nand_chip *nand, struct device *de
 	struct nand_chip *chip = &nand->chip;
 	struct mtd_info *mtd = nand_to_mtd(chip);
 	struct jz4780_nand_controller *nfc = to_jz4780_nand_controller(chip->controller);
-	struct nand_ecclayout *layout = &nand->ecclayout;
-	u32 start, i;
+	int eccbytes;
 
 	chip->ecc.bytes = fls((1 + 8) * chip->ecc.size)	*
 				(chip->ecc.strength / 8);
@@ -183,7 +179,6 @@ static int jz4780_nand_init_ecc(struct jz4780_nand_chip *nand, struct device *de
 		chip->ecc.correct = jz4780_nand_ecc_correct;
 		/* fall through */
 	case NAND_ECC_SOFT:
-	case NAND_ECC_SOFT_BCH:
 		dev_info(dev, "using %s (strength %d, size %d, bytes %d)\n",
 			(nfc->bch) ? "hardware BCH" : "software ECC",
 			chip->ecc.strength, chip->ecc.size, chip->ecc.bytes);
@@ -201,23 +196,17 @@ static int jz4780_nand_init_ecc(struct jz4780_nand_chip *nand, struct device *de
 		return 0;
 
 	/* Generate ECC layout. ECC codes are right aligned in the OOB area. */
-	layout->eccbytes = mtd->writesize / chip->ecc.size * chip->ecc.bytes;
+	eccbytes = mtd->writesize / chip->ecc.size * chip->ecc.bytes;
 
-	if (layout->eccbytes > mtd->oobsize - 2) {
+	if (eccbytes > mtd->oobsize - 2) {
 		dev_err(dev,
 			"invalid ECC config: required %d ECC bytes, but only %d are available",
-			layout->eccbytes, mtd->oobsize - 2);
+			eccbytes, mtd->oobsize - 2);
 		return -EINVAL;
 	}
 
-	start = mtd->oobsize - layout->eccbytes;
-	for (i = 0; i < layout->eccbytes; i++)
-		layout->eccpos[i] = start + i;
-
-	layout->oobfree[0].offset = 2;
-	layout->oobfree[0].length = mtd->oobsize - layout->eccbytes - 2;
+	mtd->ooblayout = &nand_ooblayout_lp_ops;
 
-	chip->ecc.layout = layout;
 	return 0;
 }
 
diff --git a/drivers/mtd/nand/lpc32xx_mlc.c b/drivers/mtd/nand/lpc32xx_mlc.c
index d8c3e7a..8523881 100644
--- a/drivers/mtd/nand/lpc32xx_mlc.c
+++ b/drivers/mtd/nand/lpc32xx_mlc.c
@@ -35,7 +35,6 @@
 #include <linux/completion.h>
 #include <linux/interrupt.h>
 #include <linux/of.h>
-#include <linux/of_mtd.h>
 #include <linux/of_gpio.h>
 #include <linux/mtd/lpc32xx_mlc.h>
 #include <linux/io.h>
@@ -139,22 +138,37 @@ struct lpc32xx_nand_cfg_mlc {
 	unsigned num_parts;
 };
 
-static struct nand_ecclayout lpc32xx_nand_oob = {
-	.eccbytes = 40,
-	.eccpos = { 6,  7,  8,  9, 10, 11, 12, 13, 14, 15,
-		   22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
-		   38, 39, 40, 41, 42, 43, 44, 45, 46, 47,
-		   54, 55, 56, 57, 58, 59, 60, 61, 62, 63 },
-	.oobfree = {
-		{ .offset = 0,
-		  .length = 6, },
-		{ .offset = 16,
-		  .length = 6, },
-		{ .offset = 32,
-		  .length = 6, },
-		{ .offset = 48,
-		  .length = 6, },
-		},
+static int lpc32xx_ooblayout_ecc(struct mtd_info *mtd, int section,
+				 struct mtd_oob_region *oobregion)
+{
+	struct nand_chip *nand_chip = mtd_to_nand(mtd);
+
+	if (section >= nand_chip->ecc.steps)
+		return -ERANGE;
+
+	oobregion->offset = ((section + 1) * 16) - nand_chip->ecc.bytes;
+	oobregion->length = nand_chip->ecc.bytes;
+
+	return 0;
+}
+
+static int lpc32xx_ooblayout_free(struct mtd_info *mtd, int section,
+				  struct mtd_oob_region *oobregion)
+{
+	struct nand_chip *nand_chip = mtd_to_nand(mtd);
+
+	if (section >= nand_chip->ecc.steps)
+		return -ERANGE;
+
+	oobregion->offset = 16 * section;
+	oobregion->length = 16 - nand_chip->ecc.bytes;
+
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops lpc32xx_ooblayout_ops = {
+	.ecc = lpc32xx_ooblayout_ecc,
+	.free = lpc32xx_ooblayout_free,
 };
 
 static struct nand_bbt_descr lpc32xx_nand_bbt = {
@@ -713,6 +727,7 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
 	nand_chip->ecc.write_oob = lpc32xx_write_oob;
 	nand_chip->ecc.read_oob = lpc32xx_read_oob;
 	nand_chip->ecc.strength = 4;
+	nand_chip->ecc.bytes = 10;
 	nand_chip->waitfunc = lpc32xx_waitfunc;
 
 	nand_chip->options = NAND_NO_SUBPAGE_WRITE;
@@ -751,7 +766,7 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
 
 	nand_chip->ecc.mode = NAND_ECC_HW;
 	nand_chip->ecc.size = 512;
-	nand_chip->ecc.layout = &lpc32xx_nand_oob;
+	mtd_set_ooblayout(mtd, &lpc32xx_ooblayout_ops);
 	host->mlcsubpages = mtd->writesize / 512;
 
 	/* initially clear interrupt status */
diff --git a/drivers/mtd/nand/lpc32xx_slc.c b/drivers/mtd/nand/lpc32xx_slc.c
index 3b8f373..8d3edc3 100644
--- a/drivers/mtd/nand/lpc32xx_slc.c
+++ b/drivers/mtd/nand/lpc32xx_slc.c
@@ -35,7 +35,6 @@
 #include <linux/mtd/nand_ecc.h>
 #include <linux/gpio.h>
 #include <linux/of.h>
-#include <linux/of_mtd.h>
 #include <linux/of_gpio.h>
 #include <linux/mtd/lpc32xx_slc.h>
 
@@ -146,13 +145,38 @@
  * NAND ECC Layout for small page NAND devices
  * Note: For large and huge page devices, the default layouts are used
  */
-static struct nand_ecclayout lpc32xx_nand_oob_16 = {
-	.eccbytes = 6,
-	.eccpos = {10, 11, 12, 13, 14, 15},
-	.oobfree = {
-		{ .offset = 0, .length = 4 },
-		{ .offset = 6, .length = 4 },
-	},
+static int lpc32xx_ooblayout_ecc(struct mtd_info *mtd, int section,
+				 struct mtd_oob_region *oobregion)
+{
+	if (section)
+		return -ERANGE;
+
+	oobregion->length = 6;
+	oobregion->offset = 10;
+
+	return 0;
+}
+
+static int lpc32xx_ooblayout_free(struct mtd_info *mtd, int section,
+				  struct mtd_oob_region *oobregion)
+{
+	if (section > 1)
+		return -ERANGE;
+
+	if (!section) {
+		oobregion->offset = 0;
+		oobregion->length = 4;
+	} else {
+		oobregion->offset = 6;
+		oobregion->length = 4;
+	}
+
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops lpc32xx_ooblayout_ops = {
+	.ecc = lpc32xx_ooblayout_ecc,
+	.free = lpc32xx_ooblayout_free,
 };
 
 static u8 bbt_pattern[] = {'B', 'b', 't', '0' };
@@ -194,7 +218,6 @@ struct lpc32xx_nand_cfg_slc {
 	uint32_t rwidth;
 	uint32_t rhold;
 	uint32_t rsetup;
-	bool use_bbt;
 	int wp_gpio;
 	struct mtd_partition *parts;
 	unsigned num_parts;
@@ -604,7 +627,8 @@ static int lpc32xx_nand_read_page_syndrome(struct mtd_info *mtd,
 					   int oob_required, int page)
 {
 	struct lpc32xx_nand_host *host = nand_get_controller_data(chip);
-	int stat, i, status;
+	struct mtd_oob_region oobregion = { };
+	int stat, i, status, error;
 	uint8_t *oobecc, tmpecc[LPC32XX_ECC_SAVE_SIZE];
 
 	/* Issue read command */
@@ -620,7 +644,11 @@ static int lpc32xx_nand_read_page_syndrome(struct mtd_info *mtd,
 	lpc32xx_slc_ecc_copy(tmpecc, (uint32_t *) host->ecc_buf, chip->ecc.steps);
 
 	/* Pointer to ECC data retrieved from NAND spare area */
-	oobecc = chip->oob_poi + chip->ecc.layout->eccpos[0];
+	error = mtd_ooblayout_ecc(mtd, 0, &oobregion);
+	if (error)
+		return error;
+
+	oobecc = chip->oob_poi + oobregion.offset;
 
 	for (i = 0; i < chip->ecc.steps; i++) {
 		stat = chip->ecc.correct(mtd, buf, oobecc,
@@ -666,7 +694,8 @@ static int lpc32xx_nand_write_page_syndrome(struct mtd_info *mtd,
 					    int oob_required, int page)
 {
 	struct lpc32xx_nand_host *host = nand_get_controller_data(chip);
-	uint8_t *pb = chip->oob_poi + chip->ecc.layout->eccpos[0];
+	struct mtd_oob_region oobregion = { };
+	uint8_t *pb;
 	int error;
 
 	/* Write data, calculate ECC on outbound data */
@@ -678,6 +707,11 @@ static int lpc32xx_nand_write_page_syndrome(struct mtd_info *mtd,
 	 * The calculated ECC needs some manual work done to it before
 	 * committing it to NAND. Process the calculated ECC and place
 	 * the resultant values directly into the OOB buffer. */
+	error = mtd_ooblayout_ecc(mtd, 0, &oobregion);
+	if (error)
+		return error;
+
+	pb = chip->oob_poi + oobregion.offset;
 	lpc32xx_slc_ecc_copy(pb, (uint32_t *)host->ecc_buf, chip->ecc.steps);
 
 	/* Write ECC data to device */
@@ -747,7 +781,6 @@ static struct lpc32xx_nand_cfg_slc *lpc32xx_parse_dt(struct device *dev)
 		return NULL;
 	}
 
-	ncfg->use_bbt = of_get_nand_on_flash_bbt(np);
 	ncfg->wp_gpio = of_get_named_gpio(np, "gpios", 0);
 
 	return ncfg;
@@ -875,26 +908,22 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
 	 * custom BBT marker layout.
 	 */
 	if (mtd->writesize <= 512)
-		chip->ecc.layout = &lpc32xx_nand_oob_16;
+		mtd_set_ooblayout(mtd, &lpc32xx_ooblayout_ops);
 
 	/* These sizes remain the same regardless of page size */
 	chip->ecc.size = 256;
 	chip->ecc.bytes = LPC32XX_SLC_DEV_ECC_BYTES;
 	chip->ecc.prepad = chip->ecc.postpad = 0;
 
-	/* Avoid extra scan if using BBT, setup BBT support */
-	if (host->ncfg->use_bbt) {
-		chip->bbt_options |= NAND_BBT_USE_FLASH;
-
-		/*
-		 * Use a custom BBT marker setup for small page FLASH that
-		 * won't interfere with the ECC layout. Large and huge page
-		 * FLASH use the standard layout.
-		 */
-		if (mtd->writesize <= 512) {
-			chip->bbt_td = &bbt_smallpage_main_descr;
-			chip->bbt_md = &bbt_smallpage_mirror_descr;
-		}
+	/*
+	 * Use a custom BBT marker setup for small page FLASH that
+	 * won't interfere with the ECC layout. Large and huge page
+	 * FLASH use the standard layout.
+	 */
+	if ((chip->bbt_options & NAND_BBT_USE_FLASH) &&
+	    mtd->writesize <= 512) {
+		chip->bbt_td = &bbt_smallpage_main_descr;
+		chip->bbt_md = &bbt_smallpage_mirror_descr;
 	}
 
 	/*
diff --git a/drivers/mtd/nand/mpc5121_nfc.c b/drivers/mtd/nand/mpc5121_nfc.c
index 5d7843f..7eacb2f 100644
--- a/drivers/mtd/nand/mpc5121_nfc.c
+++ b/drivers/mtd/nand/mpc5121_nfc.c
@@ -710,6 +710,7 @@ static int mpc5121_nfc_probe(struct platform_device *op)
 	chip->select_chip = mpc5121_nfc_select_chip;
 	chip->bbt_options = NAND_BBT_USE_FLASH;
 	chip->ecc.mode = NAND_ECC_SOFT;
+	chip->ecc.algo = NAND_ECC_HAMMING;
 
 	/* Support external chip-select logic on ADS5121 board */
 	if (of_machine_is_compatible("fsl,mpc5121ads")) {
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 854c832..5173fad 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -34,7 +34,6 @@
 #include <linux/completion.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
-#include <linux/of_mtd.h>
 
 #include <asm/mach/flash.h>
 #include <linux/platform_data/mtd-mxc_nand.h>
@@ -149,7 +148,7 @@ struct mxc_nand_devtype_data {
 	int (*check_int)(struct mxc_nand_host *);
 	void (*irq_control)(struct mxc_nand_host *, int);
 	u32 (*get_ecc_status)(struct mxc_nand_host *);
-	struct nand_ecclayout *ecclayout_512, *ecclayout_2k, *ecclayout_4k;
+	const struct mtd_ooblayout_ops *ooblayout;
 	void (*select_chip)(struct mtd_info *mtd, int chip);
 	int (*correct_data)(struct mtd_info *mtd, u_char *dat,
 			u_char *read_ecc, u_char *calc_ecc);
@@ -200,73 +199,6 @@ struct mxc_nand_host {
 	struct mxc_nand_platform_data pdata;
 };
 
-/* OOB placement block for use with hardware ecc generation */
-static struct nand_ecclayout nandv1_hw_eccoob_smallpage = {
-	.eccbytes = 5,
-	.eccpos = {6, 7, 8, 9, 10},
-	.oobfree = {{0, 5}, {12, 4}, }
-};
-
-static struct nand_ecclayout nandv1_hw_eccoob_largepage = {
-	.eccbytes = 20,
-	.eccpos = {6, 7, 8, 9, 10, 22, 23, 24, 25, 26,
-		   38, 39, 40, 41, 42, 54, 55, 56, 57, 58},
-	.oobfree = {{2, 4}, {11, 10}, {27, 10}, {43, 10}, {59, 5}, }
-};
-
-/* OOB description for 512 byte pages with 16 byte OOB */
-static struct nand_ecclayout nandv2_hw_eccoob_smallpage = {
-	.eccbytes = 1 * 9,
-	.eccpos = {
-		 7,  8,  9, 10, 11, 12, 13, 14, 15
-	},
-	.oobfree = {
-		{.offset = 0, .length = 5}
-	}
-};
-
-/* OOB description for 2048 byte pages with 64 byte OOB */
-static struct nand_ecclayout nandv2_hw_eccoob_largepage = {
-	.eccbytes = 4 * 9,
-	.eccpos = {
-		 7,  8,  9, 10, 11, 12, 13, 14, 15,
-		23, 24, 25, 26, 27, 28, 29, 30, 31,
-		39, 40, 41, 42, 43, 44, 45, 46, 47,
-		55, 56, 57, 58, 59, 60, 61, 62, 63
-	},
-	.oobfree = {
-		{.offset = 2, .length = 4},
-		{.offset = 16, .length = 7},
-		{.offset = 32, .length = 7},
-		{.offset = 48, .length = 7}
-	}
-};
-
-/* OOB description for 4096 byte pages with 128 byte OOB */
-static struct nand_ecclayout nandv2_hw_eccoob_4k = {
-	.eccbytes = 8 * 9,
-	.eccpos = {
-		7,  8,  9, 10, 11, 12, 13, 14, 15,
-		23, 24, 25, 26, 27, 28, 29, 30, 31,
-		39, 40, 41, 42, 43, 44, 45, 46, 47,
-		55, 56, 57, 58, 59, 60, 61, 62, 63,
-		71, 72, 73, 74, 75, 76, 77, 78, 79,
-		87, 88, 89, 90, 91, 92, 93, 94, 95,
-		103, 104, 105, 106, 107, 108, 109, 110, 111,
-		119, 120, 121, 122, 123, 124, 125, 126, 127,
-	},
-	.oobfree = {
-		{.offset = 2, .length = 4},
-		{.offset = 16, .length = 7},
-		{.offset = 32, .length = 7},
-		{.offset = 48, .length = 7},
-		{.offset = 64, .length = 7},
-		{.offset = 80, .length = 7},
-		{.offset = 96, .length = 7},
-		{.offset = 112, .length = 7},
-	}
-};
-
 static const char * const part_probes[] = {
 	"cmdlinepart", "RedBoot", "ofpart", NULL };
 
@@ -942,6 +874,99 @@ static void mxc_do_addr_cycle(struct mtd_info *mtd, int column, int page_addr)
 	}
 }
 
+static int mxc_v1_ooblayout_ecc(struct mtd_info *mtd, int section,
+				struct mtd_oob_region *oobregion)
+{
+	struct nand_chip *nand_chip = mtd_to_nand(mtd);
+
+	if (section >= nand_chip->ecc.steps)
+		return -ERANGE;
+
+	oobregion->offset = (section * 16) + 6;
+	oobregion->length = nand_chip->ecc.bytes;
+
+	return 0;
+}
+
+static int mxc_v1_ooblayout_free(struct mtd_info *mtd, int section,
+				 struct mtd_oob_region *oobregion)
+{
+	struct nand_chip *nand_chip = mtd_to_nand(mtd);
+
+	if (section > nand_chip->ecc.steps)
+		return -ERANGE;
+
+	if (!section) {
+		if (mtd->writesize <= 512) {
+			oobregion->offset = 0;
+			oobregion->length = 5;
+		} else {
+			oobregion->offset = 2;
+			oobregion->length = 4;
+		}
+	} else {
+		oobregion->offset = ((section - 1) * 16) +
+				    nand_chip->ecc.bytes + 6;
+		if (section < nand_chip->ecc.steps)
+			oobregion->length = (section * 16) + 6 -
+					    oobregion->offset;
+		else
+			oobregion->length = mtd->oobsize - oobregion->offset;
+	}
+
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops mxc_v1_ooblayout_ops = {
+	.ecc = mxc_v1_ooblayout_ecc,
+	.free = mxc_v1_ooblayout_free,
+};
+
+static int mxc_v2_ooblayout_ecc(struct mtd_info *mtd, int section,
+				struct mtd_oob_region *oobregion)
+{
+	struct nand_chip *nand_chip = mtd_to_nand(mtd);
+	int stepsize = nand_chip->ecc.bytes == 9 ? 16 : 26;
+
+	if (section >= nand_chip->ecc.steps)
+		return -ERANGE;
+
+	oobregion->offset = (section * stepsize) + 7;
+	oobregion->length = nand_chip->ecc.bytes;
+
+	return 0;
+}
+
+static int mxc_v2_ooblayout_free(struct mtd_info *mtd, int section,
+				 struct mtd_oob_region *oobregion)
+{
+	struct nand_chip *nand_chip = mtd_to_nand(mtd);
+	int stepsize = nand_chip->ecc.bytes == 9 ? 16 : 26;
+
+	if (section > nand_chip->ecc.steps)
+		return -ERANGE;
+
+	if (!section) {
+		if (mtd->writesize <= 512) {
+			oobregion->offset = 0;
+			oobregion->length = 5;
+		} else {
+			oobregion->offset = 2;
+			oobregion->length = 4;
+		}
+	} else {
+		oobregion->offset = section * stepsize;
+		oobregion->length = 7;
+	}
+
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops mxc_v2_ooblayout_ops = {
+	.ecc = mxc_v2_ooblayout_ecc,
+	.free = mxc_v2_ooblayout_free,
+};
+
 /*
  * v2 and v3 type controllers can do 4bit or 8bit ecc depending
  * on how much oob the nand chip has. For 8bit ecc we need at least
@@ -959,23 +984,6 @@ static int get_eccsize(struct mtd_info *mtd)
 		return 8;
 }
 
-static void ecc_8bit_layout_4k(struct nand_ecclayout *layout)
-{
-	int i, j;
-
-	layout->eccbytes = 8*18;
-	for (i = 0; i < 8; i++)
-		for (j = 0; j < 18; j++)
-			layout->eccpos[i*18 + j] = i*26 + j + 7;
-
-	layout->oobfree[0].offset = 2;
-	layout->oobfree[0].length = 4;
-	for (i = 1; i < 8; i++) {
-		layout->oobfree[i].offset = i*26;
-		layout->oobfree[i].length = 7;
-	}
-}
-
 static void preset_v1(struct mtd_info *mtd)
 {
 	struct nand_chip *nand_chip = mtd_to_nand(mtd);
@@ -1269,9 +1277,7 @@ static const struct mxc_nand_devtype_data imx21_nand_devtype_data = {
 	.check_int = check_int_v1_v2,
 	.irq_control = irq_control_v1_v2,
 	.get_ecc_status = get_ecc_status_v1,
-	.ecclayout_512 = &nandv1_hw_eccoob_smallpage,
-	.ecclayout_2k = &nandv1_hw_eccoob_largepage,
-	.ecclayout_4k = &nandv1_hw_eccoob_smallpage, /* XXX: needs fix */
+	.ooblayout = &mxc_v1_ooblayout_ops,
 	.select_chip = mxc_nand_select_chip_v1_v3,
 	.correct_data = mxc_nand_correct_data_v1,
 	.irqpending_quirk = 1,
@@ -1294,9 +1300,7 @@ static const struct mxc_nand_devtype_data imx27_nand_devtype_data = {
 	.check_int = check_int_v1_v2,
 	.irq_control = irq_control_v1_v2,
 	.get_ecc_status = get_ecc_status_v1,
-	.ecclayout_512 = &nandv1_hw_eccoob_smallpage,
-	.ecclayout_2k = &nandv1_hw_eccoob_largepage,
-	.ecclayout_4k = &nandv1_hw_eccoob_smallpage, /* XXX: needs fix */
+	.ooblayout = &mxc_v1_ooblayout_ops,
 	.select_chip = mxc_nand_select_chip_v1_v3,
 	.correct_data = mxc_nand_correct_data_v1,
 	.irqpending_quirk = 0,
@@ -1320,9 +1324,7 @@ static const struct mxc_nand_devtype_data imx25_nand_devtype_data = {
 	.check_int = check_int_v1_v2,
 	.irq_control = irq_control_v1_v2,
 	.get_ecc_status = get_ecc_status_v2,
-	.ecclayout_512 = &nandv2_hw_eccoob_smallpage,
-	.ecclayout_2k = &nandv2_hw_eccoob_largepage,
-	.ecclayout_4k = &nandv2_hw_eccoob_4k,
+	.ooblayout = &mxc_v2_ooblayout_ops,
 	.select_chip = mxc_nand_select_chip_v2,
 	.correct_data = mxc_nand_correct_data_v2_v3,
 	.irqpending_quirk = 0,
@@ -1346,9 +1348,7 @@ static const struct mxc_nand_devtype_data imx51_nand_devtype_data = {
 	.check_int = check_int_v3,
 	.irq_control = irq_control_v3,
 	.get_ecc_status = get_ecc_status_v3,
-	.ecclayout_512 = &nandv2_hw_eccoob_smallpage,
-	.ecclayout_2k = &nandv2_hw_eccoob_largepage,
-	.ecclayout_4k = &nandv2_hw_eccoob_smallpage, /* XXX: needs fix */
+	.ooblayout = &mxc_v2_ooblayout_ops,
 	.select_chip = mxc_nand_select_chip_v1_v3,
 	.correct_data = mxc_nand_correct_data_v2_v3,
 	.irqpending_quirk = 0,
@@ -1373,9 +1373,7 @@ static const struct mxc_nand_devtype_data imx53_nand_devtype_data = {
 	.check_int = check_int_v3,
 	.irq_control = irq_control_v3,
 	.get_ecc_status = get_ecc_status_v3,
-	.ecclayout_512 = &nandv2_hw_eccoob_smallpage,
-	.ecclayout_2k = &nandv2_hw_eccoob_largepage,
-	.ecclayout_4k = &nandv2_hw_eccoob_smallpage, /* XXX: needs fix */
+	.ooblayout = &mxc_v2_ooblayout_ops,
 	.select_chip = mxc_nand_select_chip_v1_v3,
 	.correct_data = mxc_nand_correct_data_v2_v3,
 	.irqpending_quirk = 0,
@@ -1461,25 +1459,12 @@ MODULE_DEVICE_TABLE(of, mxcnd_dt_ids);
 static int __init mxcnd_probe_dt(struct mxc_nand_host *host)
 {
 	struct device_node *np = host->dev->of_node;
-	struct mxc_nand_platform_data *pdata = &host->pdata;
 	const struct of_device_id *of_id =
 		of_match_device(mxcnd_dt_ids, host->dev);
-	int buswidth;
 
 	if (!np)
 		return 1;
 
-	if (of_get_nand_ecc_mode(np) >= 0)
-		pdata->hw_ecc = 1;
-
-	pdata->flash_bbt = of_get_nand_on_flash_bbt(np);
-
-	buswidth = of_get_nand_bus_width(np);
-	if (buswidth < 0)
-		return buswidth;
-
-	pdata->width = buswidth / 8;
-
 	host->devtype_data = of_id->data;
 
 	return 0;
@@ -1576,27 +1561,22 @@ static int mxcnd_probe(struct platform_device *pdev)
 
 	this->select_chip = host->devtype_data->select_chip;
 	this->ecc.size = 512;
-	this->ecc.layout = host->devtype_data->ecclayout_512;
+	mtd_set_ooblayout(mtd, host->devtype_data->ooblayout);
 
 	if (host->pdata.hw_ecc) {
-		this->ecc.calculate = mxc_nand_calculate_ecc;
-		this->ecc.hwctl = mxc_nand_enable_hwecc;
-		this->ecc.correct = host->devtype_data->correct_data;
 		this->ecc.mode = NAND_ECC_HW;
 	} else {
 		this->ecc.mode = NAND_ECC_SOFT;
+		this->ecc.algo = NAND_ECC_HAMMING;
 	}
 
 	/* NAND bus width determines access functions used by upper layer */
 	if (host->pdata.width == 2)
 		this->options |= NAND_BUSWIDTH_16;
 
-	if (host->pdata.flash_bbt) {
-		this->bbt_td = &bbt_main_descr;
-		this->bbt_md = &bbt_mirror_descr;
-		/* update flash based bbt */
+	/* update flash based bbt */
+	if (host->pdata.flash_bbt)
 		this->bbt_options |= NAND_BBT_USE_FLASH;
-	}
 
 	init_completion(&host->op_completion);
 
@@ -1637,6 +1617,26 @@ static int mxcnd_probe(struct platform_device *pdev)
 		goto escan;
 	}
 
+	switch (this->ecc.mode) {
+	case NAND_ECC_HW:
+		this->ecc.calculate = mxc_nand_calculate_ecc;
+		this->ecc.hwctl = mxc_nand_enable_hwecc;
+		this->ecc.correct = host->devtype_data->correct_data;
+		break;
+
+	case NAND_ECC_SOFT:
+		break;
+
+	default:
+		err = -EINVAL;
+		goto escan;
+	}
+
+	if (this->bbt_options & NAND_BBT_USE_FLASH) {
+		this->bbt_td = &bbt_main_descr;
+		this->bbt_md = &bbt_mirror_descr;
+	}
+
 	/* allocate the right size buffer now */
 	devm_kfree(&pdev->dev, (void *)host->data_buf);
 	host->data_buf = devm_kzalloc(&pdev->dev, mtd->writesize + mtd->oobsize,
@@ -1649,12 +1649,11 @@ static int mxcnd_probe(struct platform_device *pdev)
 	/* Call preset again, with correct writesize this time */
 	host->devtype_data->preset(mtd);
 
-	if (mtd->writesize == 2048)
-		this->ecc.layout = host->devtype_data->ecclayout_2k;
-	else if (mtd->writesize == 4096) {
-		this->ecc.layout = host->devtype_data->ecclayout_4k;
-		if (get_eccsize(mtd) == 8)
-			ecc_8bit_layout_4k(this->ecc.layout);
+	if (!this->ecc.bytes) {
+		if (host->eccsize == 8)
+			this->ecc.bytes = 18;
+		else if (host->eccsize == 4)
+			this->ecc.bytes = 9;
 	}
 
 	/*
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index ba4f603..0b0dc29 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -45,56 +45,98 @@
 #include <linux/bitops.h>
 #include <linux/io.h>
 #include <linux/mtd/partitions.h>
-#include <linux/of_mtd.h>
+#include <linux/of.h>
+
+static int nand_get_device(struct mtd_info *mtd, int new_state);
+
+static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
+			     struct mtd_oob_ops *ops);
 
 /* Define default oob placement schemes for large and small page devices */
-static struct nand_ecclayout nand_oob_8 = {
-	.eccbytes = 3,
-	.eccpos = {0, 1, 2},
-	.oobfree = {
-		{.offset = 3,
-		 .length = 2},
-		{.offset = 6,
-		 .length = 2} }
-};
+static int nand_ooblayout_ecc_sp(struct mtd_info *mtd, int section,
+				 struct mtd_oob_region *oobregion)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
+	struct nand_ecc_ctrl *ecc = &chip->ecc;
 
-static struct nand_ecclayout nand_oob_16 = {
-	.eccbytes = 6,
-	.eccpos = {0, 1, 2, 3, 6, 7},
-	.oobfree = {
-		{.offset = 8,
-		 . length = 8} }
-};
+	if (section > 1)
+		return -ERANGE;
 
-static struct nand_ecclayout nand_oob_64 = {
-	.eccbytes = 24,
-	.eccpos = {
-		   40, 41, 42, 43, 44, 45, 46, 47,
-		   48, 49, 50, 51, 52, 53, 54, 55,
-		   56, 57, 58, 59, 60, 61, 62, 63},
-	.oobfree = {
-		{.offset = 2,
-		 .length = 38} }
-};
+	if (!section) {
+		oobregion->offset = 0;
+		oobregion->length = 4;
+	} else {
+		oobregion->offset = 6;
+		oobregion->length = ecc->total - 4;
+	}
+
+	return 0;
+}
+
+static int nand_ooblayout_free_sp(struct mtd_info *mtd, int section,
+				  struct mtd_oob_region *oobregion)
+{
+	if (section > 1)
+		return -ERANGE;
+
+	if (mtd->oobsize == 16) {
+		if (section)
+			return -ERANGE;
+
+		oobregion->length = 8;
+		oobregion->offset = 8;
+	} else {
+		oobregion->length = 2;
+		if (!section)
+			oobregion->offset = 3;
+		else
+			oobregion->offset = 6;
+	}
+
+	return 0;
+}
 
-static struct nand_ecclayout nand_oob_128 = {
-	.eccbytes = 48,
-	.eccpos = {
-		   80, 81, 82, 83, 84, 85, 86, 87,
-		   88, 89, 90, 91, 92, 93, 94, 95,
-		   96, 97, 98, 99, 100, 101, 102, 103,
-		   104, 105, 106, 107, 108, 109, 110, 111,
-		   112, 113, 114, 115, 116, 117, 118, 119,
-		   120, 121, 122, 123, 124, 125, 126, 127},
-	.oobfree = {
-		{.offset = 2,
-		 .length = 78} }
+const struct mtd_ooblayout_ops nand_ooblayout_sp_ops = {
+	.ecc = nand_ooblayout_ecc_sp,
+	.free = nand_ooblayout_free_sp,
 };
+EXPORT_SYMBOL_GPL(nand_ooblayout_sp_ops);
 
-static int nand_get_device(struct mtd_info *mtd, int new_state);
+static int nand_ooblayout_ecc_lp(struct mtd_info *mtd, int section,
+				 struct mtd_oob_region *oobregion)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
+	struct nand_ecc_ctrl *ecc = &chip->ecc;
 
-static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
-			     struct mtd_oob_ops *ops);
+	if (section)
+		return -ERANGE;
+
+	oobregion->length = ecc->total;
+	oobregion->offset = mtd->oobsize - oobregion->length;
+
+	return 0;
+}
+
+static int nand_ooblayout_free_lp(struct mtd_info *mtd, int section,
+				  struct mtd_oob_region *oobregion)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
+	struct nand_ecc_ctrl *ecc = &chip->ecc;
+
+	if (section)
+		return -ERANGE;
+
+	oobregion->length = mtd->oobsize - ecc->total - 2;
+	oobregion->offset = 2;
+
+	return 0;
+}
+
+const struct mtd_ooblayout_ops nand_ooblayout_lp_ops = {
+	.ecc = nand_ooblayout_ecc_lp,
+	.free = nand_ooblayout_free_lp,
+};
+EXPORT_SYMBOL_GPL(nand_ooblayout_lp_ops);
 
 static int check_offs_len(struct mtd_info *mtd,
 					loff_t ofs, uint64_t len)
@@ -1279,13 +1321,12 @@ static int nand_read_page_raw_syndrome(struct mtd_info *mtd,
 static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
 				uint8_t *buf, int oob_required, int page)
 {
-	int i, eccsize = chip->ecc.size;
+	int i, eccsize = chip->ecc.size, ret;
 	int eccbytes = chip->ecc.bytes;
 	int eccsteps = chip->ecc.steps;
 	uint8_t *p = buf;
 	uint8_t *ecc_calc = chip->buffers->ecccalc;
 	uint8_t *ecc_code = chip->buffers->ecccode;
-	uint32_t *eccpos = chip->ecc.layout->eccpos;
 	unsigned int max_bitflips = 0;
 
 	chip->ecc.read_page_raw(mtd, chip, buf, 1, page);
@@ -1293,8 +1334,10 @@ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
 	for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize)
 		chip->ecc.calculate(mtd, p, &ecc_calc[i]);
 
-	for (i = 0; i < chip->ecc.total; i++)
-		ecc_code[i] = chip->oob_poi[eccpos[i]];
+	ret = mtd_ooblayout_get_eccbytes(mtd, ecc_code, chip->oob_poi, 0,
+					 chip->ecc.total);
+	if (ret)
+		return ret;
 
 	eccsteps = chip->ecc.steps;
 	p = buf;
@@ -1326,14 +1369,14 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
 			uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi,
 			int page)
 {
-	int start_step, end_step, num_steps;
-	uint32_t *eccpos = chip->ecc.layout->eccpos;
+	int start_step, end_step, num_steps, ret;
 	uint8_t *p;
 	int data_col_addr, i, gaps = 0;
 	int datafrag_len, eccfrag_len, aligned_len, aligned_pos;
 	int busw = (chip->options & NAND_BUSWIDTH_16) ? 2 : 1;
-	int index;
+	int index, section = 0;
 	unsigned int max_bitflips = 0;
+	struct mtd_oob_region oobregion = { };
 
 	/* Column address within the page aligned to ECC size (256bytes) */
 	start_step = data_offs / chip->ecc.size;
@@ -1361,12 +1404,13 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
 	 * The performance is faster if we position offsets according to
 	 * ecc.pos. Let's make sure that there are no gaps in ECC positions.
 	 */
-	for (i = 0; i < eccfrag_len - 1; i++) {
-		if (eccpos[i + index] + 1 != eccpos[i + index + 1]) {
-			gaps = 1;
-			break;
-		}
-	}
+	ret = mtd_ooblayout_find_eccregion(mtd, index, &section, &oobregion);
+	if (ret)
+		return ret;
+
+	if (oobregion.length < eccfrag_len)
+		gaps = 1;
+
 	if (gaps) {
 		chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1);
 		chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
@@ -1375,20 +1419,23 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
 		 * Send the command to read the particular ECC bytes take care
 		 * about buswidth alignment in read_buf.
 		 */
-		aligned_pos = eccpos[index] & ~(busw - 1);
+		aligned_pos = oobregion.offset & ~(busw - 1);
 		aligned_len = eccfrag_len;
-		if (eccpos[index] & (busw - 1))
+		if (oobregion.offset & (busw - 1))
 			aligned_len++;
-		if (eccpos[index + (num_steps * chip->ecc.bytes)] & (busw - 1))
+		if ((oobregion.offset + (num_steps * chip->ecc.bytes)) &
+		    (busw - 1))
 			aligned_len++;
 
 		chip->cmdfunc(mtd, NAND_CMD_RNDOUT,
-					mtd->writesize + aligned_pos, -1);
+			      mtd->writesize + aligned_pos, -1);
 		chip->read_buf(mtd, &chip->oob_poi[aligned_pos], aligned_len);
 	}
 
-	for (i = 0; i < eccfrag_len; i++)
-		chip->buffers->ecccode[i] = chip->oob_poi[eccpos[i + index]];
+	ret = mtd_ooblayout_get_eccbytes(mtd, chip->buffers->ecccode,
+					 chip->oob_poi, index, eccfrag_len);
+	if (ret)
+		return ret;
 
 	p = bufpoi + data_col_addr;
 	for (i = 0; i < eccfrag_len ; i += chip->ecc.bytes, p += chip->ecc.size) {
@@ -1429,13 +1476,12 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
 static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
 				uint8_t *buf, int oob_required, int page)
 {
-	int i, eccsize = chip->ecc.size;
+	int i, eccsize = chip->ecc.size, ret;
 	int eccbytes = chip->ecc.bytes;
 	int eccsteps = chip->ecc.steps;
 	uint8_t *p = buf;
 	uint8_t *ecc_calc = chip->buffers->ecccalc;
 	uint8_t *ecc_code = chip->buffers->ecccode;
-	uint32_t *eccpos = chip->ecc.layout->eccpos;
 	unsigned int max_bitflips = 0;
 
 	for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
@@ -1445,8 +1491,10 @@ static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
 	}
 	chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
 
-	for (i = 0; i < chip->ecc.total; i++)
-		ecc_code[i] = chip->oob_poi[eccpos[i]];
+	ret = mtd_ooblayout_get_eccbytes(mtd, ecc_code, chip->oob_poi, 0,
+					 chip->ecc.total);
+	if (ret)
+		return ret;
 
 	eccsteps = chip->ecc.steps;
 	p = buf;
@@ -1491,12 +1539,11 @@ static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
 static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd,
 	struct nand_chip *chip, uint8_t *buf, int oob_required, int page)
 {
-	int i, eccsize = chip->ecc.size;
+	int i, eccsize = chip->ecc.size, ret;
 	int eccbytes = chip->ecc.bytes;
 	int eccsteps = chip->ecc.steps;
 	uint8_t *p = buf;
 	uint8_t *ecc_code = chip->buffers->ecccode;
-	uint32_t *eccpos = chip->ecc.layout->eccpos;
 	uint8_t *ecc_calc = chip->buffers->ecccalc;
 	unsigned int max_bitflips = 0;
 
@@ -1505,8 +1552,10 @@ static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd,
 	chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
 	chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
 
-	for (i = 0; i < chip->ecc.total; i++)
-		ecc_code[i] = chip->oob_poi[eccpos[i]];
+	ret = mtd_ooblayout_get_eccbytes(mtd, ecc_code, chip->oob_poi, 0,
+					 chip->ecc.total);
+	if (ret)
+		return ret;
 
 	for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
 		int stat;
@@ -1607,14 +1656,17 @@ static int nand_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
 
 /**
  * nand_transfer_oob - [INTERN] Transfer oob to client buffer
- * @chip: nand chip structure
+ * @mtd: mtd info structure
  * @oob: oob destination address
  * @ops: oob ops structure
  * @len: size of oob to transfer
  */
-static uint8_t *nand_transfer_oob(struct nand_chip *chip, uint8_t *oob,
+static uint8_t *nand_transfer_oob(struct mtd_info *mtd, uint8_t *oob,
 				  struct mtd_oob_ops *ops, size_t len)
 {
+	struct nand_chip *chip = mtd_to_nand(mtd);
+	int ret;
+
 	switch (ops->mode) {
 
 	case MTD_OPS_PLACE_OOB:
@@ -1622,31 +1674,12 @@ static uint8_t *nand_transfer_oob(struct nand_chip *chip, uint8_t *oob,
 		memcpy(oob, chip->oob_poi + ops->ooboffs, len);
 		return oob + len;
 
-	case MTD_OPS_AUTO_OOB: {
-		struct nand_oobfree *free = chip->ecc.layout->oobfree;
-		uint32_t boffs = 0, roffs = ops->ooboffs;
-		size_t bytes = 0;
-
-		for (; free->length && len; free++, len -= bytes) {
-			/* Read request not from offset 0? */
-			if (unlikely(roffs)) {
-				if (roffs >= free->length) {
-					roffs -= free->length;
-					continue;
-				}
-				boffs = free->offset + roffs;
-				bytes = min_t(size_t, len,
-					      (free->length - roffs));
-				roffs = 0;
-			} else {
-				bytes = min_t(size_t, len, free->length);
-				boffs = free->offset;
-			}
-			memcpy(oob, chip->oob_poi + boffs, bytes);
-			oob += bytes;
-		}
-		return oob;
-	}
+	case MTD_OPS_AUTO_OOB:
+		ret = mtd_ooblayout_get_databytes(mtd, oob, chip->oob_poi,
+						  ops->ooboffs, len);
+		BUG_ON(ret);
+		return oob + len;
+
 	default:
 		BUG();
 	}
@@ -1780,7 +1813,7 @@ read_retry:
 				int toread = min(oobreadlen, max_oobsize);
 
 				if (toread) {
-					oob = nand_transfer_oob(chip,
+					oob = nand_transfer_oob(mtd,
 						oob, ops, toread);
 					oobreadlen -= toread;
 				}
@@ -1893,13 +1926,13 @@ static int nand_read(struct mtd_info *mtd, loff_t from, size_t len,
  * @chip: nand chip info structure
  * @page: page number to read
  */
-static int nand_read_oob_std(struct mtd_info *mtd, struct nand_chip *chip,
-			     int page)
+int nand_read_oob_std(struct mtd_info *mtd, struct nand_chip *chip, int page)
 {
 	chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
 	chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
 	return 0;
 }
+EXPORT_SYMBOL(nand_read_oob_std);
 
 /**
  * nand_read_oob_syndrome - [REPLACEABLE] OOB data read function for HW ECC
@@ -1908,8 +1941,8 @@ static int nand_read_oob_std(struct mtd_info *mtd, struct nand_chip *chip,
  * @chip: nand chip info structure
  * @page: page number to read
  */
-static int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
-				  int page)
+int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
+			   int page)
 {
 	int length = mtd->oobsize;
 	int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad;
@@ -1937,6 +1970,7 @@ static int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
 
 	return 0;
 }
+EXPORT_SYMBOL(nand_read_oob_syndrome);
 
 /**
  * nand_write_oob_std - [REPLACEABLE] the most common OOB data write function
@@ -1944,8 +1978,7 @@ static int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
  * @chip: nand chip info structure
  * @page: page number to write
  */
-static int nand_write_oob_std(struct mtd_info *mtd, struct nand_chip *chip,
-			      int page)
+int nand_write_oob_std(struct mtd_info *mtd, struct nand_chip *chip, int page)
 {
 	int status = 0;
 	const uint8_t *buf = chip->oob_poi;
@@ -1960,6 +1993,7 @@ static int nand_write_oob_std(struct mtd_info *mtd, struct nand_chip *chip,
 
 	return status & NAND_STATUS_FAIL ? -EIO : 0;
 }
+EXPORT_SYMBOL(nand_write_oob_std);
 
 /**
  * nand_write_oob_syndrome - [REPLACEABLE] OOB data write function for HW ECC
@@ -1968,8 +2002,8 @@ static int nand_write_oob_std(struct mtd_info *mtd, struct nand_chip *chip,
  * @chip: nand chip info structure
  * @page: page number to write
  */
-static int nand_write_oob_syndrome(struct mtd_info *mtd,
-				   struct nand_chip *chip, int page)
+int nand_write_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
+			    int page)
 {
 	int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad;
 	int eccsize = chip->ecc.size, length = mtd->oobsize;
@@ -2019,6 +2053,7 @@ static int nand_write_oob_syndrome(struct mtd_info *mtd,
 
 	return status & NAND_STATUS_FAIL ? -EIO : 0;
 }
+EXPORT_SYMBOL(nand_write_oob_syndrome);
 
 /**
  * nand_do_read_oob - [INTERN] NAND read out-of-band
@@ -2078,7 +2113,7 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
 			break;
 
 		len = min(len, readlen);
-		buf = nand_transfer_oob(chip, buf, ops, len);
+		buf = nand_transfer_oob(mtd, buf, ops, len);
 
 		if (chip->options & NAND_NEED_READRDY) {
 			/* Apply delay or wait for ready/busy pin */
@@ -2237,19 +2272,20 @@ static int nand_write_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
 				 const uint8_t *buf, int oob_required,
 				 int page)
 {
-	int i, eccsize = chip->ecc.size;
+	int i, eccsize = chip->ecc.size, ret;
 	int eccbytes = chip->ecc.bytes;
 	int eccsteps = chip->ecc.steps;
 	uint8_t *ecc_calc = chip->buffers->ecccalc;
 	const uint8_t *p = buf;
-	uint32_t *eccpos = chip->ecc.layout->eccpos;
 
 	/* Software ECC calculation */
 	for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize)
 		chip->ecc.calculate(mtd, p, &ecc_calc[i]);
 
-	for (i = 0; i < chip->ecc.total; i++)
-		chip->oob_poi[eccpos[i]] = ecc_calc[i];
+	ret = mtd_ooblayout_set_eccbytes(mtd, ecc_calc, chip->oob_poi, 0,
+					 chip->ecc.total);
+	if (ret)
+		return ret;
 
 	return chip->ecc.write_page_raw(mtd, chip, buf, 1, page);
 }
@@ -2266,12 +2302,11 @@ static int nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
 				  const uint8_t *buf, int oob_required,
 				  int page)
 {
-	int i, eccsize = chip->ecc.size;
+	int i, eccsize = chip->ecc.size, ret;
 	int eccbytes = chip->ecc.bytes;
 	int eccsteps = chip->ecc.steps;
 	uint8_t *ecc_calc = chip->buffers->ecccalc;
 	const uint8_t *p = buf;
-	uint32_t *eccpos = chip->ecc.layout->eccpos;
 
 	for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
 		chip->ecc.hwctl(mtd, NAND_ECC_WRITE);
@@ -2279,8 +2314,10 @@ static int nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
 		chip->ecc.calculate(mtd, p, &ecc_calc[i]);
 	}
 
-	for (i = 0; i < chip->ecc.total; i++)
-		chip->oob_poi[eccpos[i]] = ecc_calc[i];
+	ret = mtd_ooblayout_set_eccbytes(mtd, ecc_calc, chip->oob_poi, 0,
+					 chip->ecc.total);
+	if (ret)
+		return ret;
 
 	chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
 
@@ -2308,11 +2345,10 @@ static int nand_write_subpage_hwecc(struct mtd_info *mtd,
 	int ecc_size      = chip->ecc.size;
 	int ecc_bytes     = chip->ecc.bytes;
 	int ecc_steps     = chip->ecc.steps;
-	uint32_t *eccpos  = chip->ecc.layout->eccpos;
 	uint32_t start_step = offset / ecc_size;
 	uint32_t end_step   = (offset + data_len - 1) / ecc_size;
 	int oob_bytes       = mtd->oobsize / ecc_steps;
-	int step, i;
+	int step, ret;
 
 	for (step = 0; step < ecc_steps; step++) {
 		/* configure controller for WRITE access */
@@ -2340,8 +2376,10 @@ static int nand_write_subpage_hwecc(struct mtd_info *mtd,
 	/* copy calculated ECC for whole page to chip->buffer->oob */
 	/* this include masked-value(0xFF) for unwritten subpages */
 	ecc_calc = chip->buffers->ecccalc;
-	for (i = 0; i < chip->ecc.total; i++)
-		chip->oob_poi[eccpos[i]] = ecc_calc[i];
+	ret = mtd_ooblayout_set_eccbytes(mtd, ecc_calc, chip->oob_poi, 0,
+					 chip->ecc.total);
+	if (ret)
+		return ret;
 
 	/* write OOB buffer to NAND device */
 	chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
@@ -2478,6 +2516,7 @@ static uint8_t *nand_fill_oob(struct mtd_info *mtd, uint8_t *oob, size_t len,
 			      struct mtd_oob_ops *ops)
 {
 	struct nand_chip *chip = mtd_to_nand(mtd);
+	int ret;
 
 	/*
 	 * Initialise to all 0xFF, to avoid the possibility of left over OOB
@@ -2492,31 +2531,12 @@ static uint8_t *nand_fill_oob(struct mtd_info *mtd, uint8_t *oob, size_t len,
 		memcpy(chip->oob_poi + ops->ooboffs, oob, len);
 		return oob + len;
 
-	case MTD_OPS_AUTO_OOB: {
-		struct nand_oobfree *free = chip->ecc.layout->oobfree;
-		uint32_t boffs = 0, woffs = ops->ooboffs;
-		size_t bytes = 0;
-
-		for (; free->length && len; free++, len -= bytes) {
-			/* Write request not from offset 0? */
-			if (unlikely(woffs)) {
-				if (woffs >= free->length) {
-					woffs -= free->length;
-					continue;
-				}
-				boffs = free->offset + woffs;
-				bytes = min_t(size_t, len,
-					      (free->length - woffs));
-				woffs = 0;
-			} else {
-				bytes = min_t(size_t, len, free->length);
-				boffs = free->offset;
-			}
-			memcpy(chip->oob_poi + boffs, oob, bytes);
-			oob += bytes;
-		}
-		return oob;
-	}
+	case MTD_OPS_AUTO_OOB:
+		ret = mtd_ooblayout_set_databytes(mtd, oob, chip->oob_poi,
+						  ops->ooboffs, len);
+		BUG_ON(ret);
+		return oob + len;
+
 	default:
 		BUG();
 	}
@@ -3951,10 +3971,115 @@ ident_done:
 	return type;
 }
 
+static const char * const nand_ecc_modes[] = {
+	[NAND_ECC_NONE]		= "none",
+	[NAND_ECC_SOFT]		= "soft",
+	[NAND_ECC_HW]		= "hw",
+	[NAND_ECC_HW_SYNDROME]	= "hw_syndrome",
+	[NAND_ECC_HW_OOB_FIRST]	= "hw_oob_first",
+};
+
+static int of_get_nand_ecc_mode(struct device_node *np)
+{
+	const char *pm;
+	int err, i;
+
+	err = of_property_read_string(np, "nand-ecc-mode", &pm);
+	if (err < 0)
+		return err;
+
+	for (i = 0; i < ARRAY_SIZE(nand_ecc_modes); i++)
+		if (!strcasecmp(pm, nand_ecc_modes[i]))
+			return i;
+
+	/*
+	 * For backward compatibility we support few obsoleted values that don't
+	 * have their mappings into nand_ecc_modes_t anymore (they were merged
+	 * with other enums).
+	 */
+	if (!strcasecmp(pm, "soft_bch"))
+		return NAND_ECC_SOFT;
+
+	return -ENODEV;
+}
+
+static const char * const nand_ecc_algos[] = {
+	[NAND_ECC_HAMMING]	= "hamming",
+	[NAND_ECC_BCH]		= "bch",
+};
+
+static int of_get_nand_ecc_algo(struct device_node *np)
+{
+	const char *pm;
+	int err, i;
+
+	err = of_property_read_string(np, "nand-ecc-algo", &pm);
+	if (!err) {
+		for (i = NAND_ECC_HAMMING; i < ARRAY_SIZE(nand_ecc_algos); i++)
+			if (!strcasecmp(pm, nand_ecc_algos[i]))
+				return i;
+		return -ENODEV;
+	}
+
+	/*
+	 * For backward compatibility we also read "nand-ecc-mode" checking
+	 * for some obsoleted values that were specifying ECC algorithm.
+	 */
+	err = of_property_read_string(np, "nand-ecc-mode", &pm);
+	if (err < 0)
+		return err;
+
+	if (!strcasecmp(pm, "soft"))
+		return NAND_ECC_HAMMING;
+	else if (!strcasecmp(pm, "soft_bch"))
+		return NAND_ECC_BCH;
+
+	return -ENODEV;
+}
+
+static int of_get_nand_ecc_step_size(struct device_node *np)
+{
+	int ret;
+	u32 val;
+
+	ret = of_property_read_u32(np, "nand-ecc-step-size", &val);
+	return ret ? ret : val;
+}
+
+static int of_get_nand_ecc_strength(struct device_node *np)
+{
+	int ret;
+	u32 val;
+
+	ret = of_property_read_u32(np, "nand-ecc-strength", &val);
+	return ret ? ret : val;
+}
+
+static int of_get_nand_bus_width(struct device_node *np)
+{
+	u32 val;
+
+	if (of_property_read_u32(np, "nand-bus-width", &val))
+		return 8;
+
+	switch (val) {
+	case 8:
+	case 16:
+		return val;
+	default:
+		return -EIO;
+	}
+}
+
+static bool of_get_nand_on_flash_bbt(struct device_node *np)
+{
+	return of_property_read_bool(np, "nand-on-flash-bbt");
+}
+
 static int nand_dt_init(struct nand_chip *chip)
 {
 	struct device_node *dn = nand_get_flash_node(chip);
-	int ecc_mode, ecc_strength, ecc_step;
+	int ecc_mode, ecc_algo, ecc_strength, ecc_step;
 
 	if (!dn)
 		return 0;
@@ -3966,6 +4091,7 @@ static int nand_dt_init(struct nand_chip *chip)
 		chip->bbt_options |= NAND_BBT_USE_FLASH;
 
 	ecc_mode = of_get_nand_ecc_mode(dn);
+	ecc_algo = of_get_nand_ecc_algo(dn);
 	ecc_strength = of_get_nand_ecc_strength(dn);
 	ecc_step = of_get_nand_ecc_step_size(dn);
 
@@ -3978,6 +4104,9 @@ static int nand_dt_init(struct nand_chip *chip)
 	if (ecc_mode >= 0)
 		chip->ecc.mode = ecc_mode;
 
+	if (ecc_algo >= 0)
+		chip->ecc.algo = ecc_algo;
+
 	if (ecc_strength >= 0)
 		chip->ecc.strength = ecc_strength;
 
@@ -4054,6 +4183,82 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips,
 }
 EXPORT_SYMBOL(nand_scan_ident);
 
+static int nand_set_ecc_soft_ops(struct mtd_info *mtd)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
+	struct nand_ecc_ctrl *ecc = &chip->ecc;
+
+	if (WARN_ON(ecc->mode != NAND_ECC_SOFT))
+		return -EINVAL;
+
+	switch (ecc->algo) {
+	case NAND_ECC_HAMMING:
+		ecc->calculate = nand_calculate_ecc;
+		ecc->correct = nand_correct_data;
+		ecc->read_page = nand_read_page_swecc;
+		ecc->read_subpage = nand_read_subpage;
+		ecc->write_page = nand_write_page_swecc;
+		ecc->read_page_raw = nand_read_page_raw;
+		ecc->write_page_raw = nand_write_page_raw;
+		ecc->read_oob = nand_read_oob_std;
+		ecc->write_oob = nand_write_oob_std;
+		if (!ecc->size)
+			ecc->size = 256;
+		ecc->bytes = 3;
+		ecc->strength = 1;
+		return 0;
+	case NAND_ECC_BCH:
+		if (!mtd_nand_has_bch()) {
+			WARN(1, "CONFIG_MTD_NAND_ECC_BCH not enabled\n");
+			return -EINVAL;
+		}
+		ecc->calculate = nand_bch_calculate_ecc;
+		ecc->correct = nand_bch_correct_data;
+		ecc->read_page = nand_read_page_swecc;
+		ecc->read_subpage = nand_read_subpage;
+		ecc->write_page = nand_write_page_swecc;
+		ecc->read_page_raw = nand_read_page_raw;
+		ecc->write_page_raw = nand_write_page_raw;
+		ecc->read_oob = nand_read_oob_std;
+		ecc->write_oob = nand_write_oob_std;
+		/*
+		* Board driver should supply ecc.size and ecc.strength
+		* values to select how many bits are correctable.
+		* Otherwise, default to 4 bits for large page devices.
+		*/
+		if (!ecc->size && (mtd->oobsize >= 64)) {
+			ecc->size = 512;
+			ecc->strength = 4;
+		}
+
+		/*
+		 * if no ecc placement scheme was provided pickup the default
+		 * large page one.
+		 */
+		if (!mtd->ooblayout) {
+			/* handle large page devices only */
+			if (mtd->oobsize < 64) {
+				WARN(1, "OOB layout is required when using software BCH on small pages\n");
+				return -EINVAL;
+			}
+
+			mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
+		}
+
+		/* See nand_bch_init() for details. */
+		ecc->bytes = 0;
+		ecc->priv = nand_bch_init(mtd);
+		if (!ecc->priv) {
+			WARN(1, "BCH ECC initialization failed!\n");
+			return -EINVAL;
+		}
+		return 0;
+	default:
+		WARN(1, "Unsupported ECC algorithm!\n");
+		return -EINVAL;
+	}
+}
+
 /*
  * Check if the chip configuration meet the datasheet requirements.
 
@@ -4098,14 +4303,15 @@ static bool nand_ecc_strength_good(struct mtd_info *mtd)
  */
 int nand_scan_tail(struct mtd_info *mtd)
 {
-	int i;
 	struct nand_chip *chip = mtd_to_nand(mtd);
 	struct nand_ecc_ctrl *ecc = &chip->ecc;
 	struct nand_buffers *nbuf;
+	int ret;
 
 	/* New bad blocks should be marked in OOB, flash-based BBT, or both */
-	BUG_ON((chip->bbt_options & NAND_BBT_NO_OOB_BBM) &&
-			!(chip->bbt_options & NAND_BBT_USE_FLASH));
+	if (WARN_ON((chip->bbt_options & NAND_BBT_NO_OOB_BBM) &&
+		   !(chip->bbt_options & NAND_BBT_USE_FLASH)))
+		return -EINVAL;
 
 	if (!(chip->options & NAND_OWN_BUFFERS)) {
 		nbuf = kzalloc(sizeof(*nbuf) + mtd->writesize
@@ -4128,24 +4334,22 @@ int nand_scan_tail(struct mtd_info *mtd)
 	/*
 	 * If no default placement scheme is given, select an appropriate one.
 	 */
-	if (!ecc->layout && (ecc->mode != NAND_ECC_SOFT_BCH)) {
+	if (!mtd->ooblayout &&
+	    !(ecc->mode == NAND_ECC_SOFT && ecc->algo == NAND_ECC_BCH)) {
 		switch (mtd->oobsize) {
 		case 8:
-			ecc->layout = &nand_oob_8;
-			break;
 		case 16:
-			ecc->layout = &nand_oob_16;
+			mtd_set_ooblayout(mtd, &nand_ooblayout_sp_ops);
 			break;
 		case 64:
-			ecc->layout = &nand_oob_64;
-			break;
 		case 128:
-			ecc->layout = &nand_oob_128;
+			mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
 			break;
 		default:
-			pr_warn("No oob scheme defined for oobsize %d\n",
-				   mtd->oobsize);
-			BUG();
+			WARN(1, "No oob scheme defined for oobsize %d\n",
+				mtd->oobsize);
+			ret = -EINVAL;
+			goto err_free;
 		}
 	}
 
@@ -4161,8 +4365,9 @@ int nand_scan_tail(struct mtd_info *mtd)
 	case NAND_ECC_HW_OOB_FIRST:
 		/* Similar to NAND_ECC_HW, but a separate read_page handle */
 		if (!ecc->calculate || !ecc->correct || !ecc->hwctl) {
-			pr_warn("No ECC functions supplied; hardware ECC not possible\n");
-			BUG();
+			WARN(1, "No ECC functions supplied; hardware ECC not possible\n");
+			ret = -EINVAL;
+			goto err_free;
 		}
 		if (!ecc->read_page)
 			ecc->read_page = nand_read_page_hwecc_oob_first;
@@ -4192,8 +4397,9 @@ int nand_scan_tail(struct mtd_info *mtd)
 		     ecc->read_page == nand_read_page_hwecc ||
 		     !ecc->write_page ||
 		     ecc->write_page == nand_write_page_hwecc)) {
-			pr_warn("No ECC functions supplied; hardware ECC not possible\n");
-			BUG();
+			WARN(1, "No ECC functions supplied; hardware ECC not possible\n");
+			ret = -EINVAL;
+			goto err_free;
 		}
 		/* Use standard syndrome read/write page function? */
 		if (!ecc->read_page)
@@ -4211,61 +4417,22 @@ int nand_scan_tail(struct mtd_info *mtd)
 
 		if (mtd->writesize >= ecc->size) {
 			if (!ecc->strength) {
-				pr_warn("Driver must set ecc.strength when using hardware ECC\n");
-				BUG();
+				WARN(1, "Driver must set ecc.strength when using hardware ECC\n");
+				ret = -EINVAL;
+				goto err_free;
 			}
 			break;
 		}
 		pr_warn("%d byte HW ECC not possible on %d byte page size, fallback to SW ECC\n",
 			ecc->size, mtd->writesize);
 		ecc->mode = NAND_ECC_SOFT;
+		ecc->algo = NAND_ECC_HAMMING;
 
 	case NAND_ECC_SOFT:
-		ecc->calculate = nand_calculate_ecc;
-		ecc->correct = nand_correct_data;
-		ecc->read_page = nand_read_page_swecc;
-		ecc->read_subpage = nand_read_subpage;
-		ecc->write_page = nand_write_page_swecc;
-		ecc->read_page_raw = nand_read_page_raw;
-		ecc->write_page_raw = nand_write_page_raw;
-		ecc->read_oob = nand_read_oob_std;
-		ecc->write_oob = nand_write_oob_std;
-		if (!ecc->size)
-			ecc->size = 256;
-		ecc->bytes = 3;
-		ecc->strength = 1;
-		break;
-
-	case NAND_ECC_SOFT_BCH:
-		if (!mtd_nand_has_bch()) {
-			pr_warn("CONFIG_MTD_NAND_ECC_BCH not enabled\n");
-			BUG();
-		}
-		ecc->calculate = nand_bch_calculate_ecc;
-		ecc->correct = nand_bch_correct_data;
-		ecc->read_page = nand_read_page_swecc;
-		ecc->read_subpage = nand_read_subpage;
-		ecc->write_page = nand_write_page_swecc;
-		ecc->read_page_raw = nand_read_page_raw;
-		ecc->write_page_raw = nand_write_page_raw;
-		ecc->read_oob = nand_read_oob_std;
-		ecc->write_oob = nand_write_oob_std;
-		/*
-		 * Board driver should supply ecc.size and ecc.strength values
-		 * to select how many bits are correctable. Otherwise, default
-		 * to 4 bits for large page devices.
-		 */
-		if (!ecc->size && (mtd->oobsize >= 64)) {
-			ecc->size = 512;
-			ecc->strength = 4;
-		}
-
-		/* See nand_bch_init() for details. */
-		ecc->bytes = 0;
-		ecc->priv = nand_bch_init(mtd);
-		if (!ecc->priv) {
-			pr_warn("BCH ECC initialization failed!\n");
-			BUG();
+		ret = nand_set_ecc_soft_ops(mtd);
+		if (ret) {
+			ret = -EINVAL;
+			goto err_free;
 		}
 		break;
 
@@ -4283,8 +4450,9 @@ int nand_scan_tail(struct mtd_info *mtd)
 		break;
 
 	default:
-		pr_warn("Invalid NAND_ECC_MODE %d\n", ecc->mode);
-		BUG();
+		WARN(1, "Invalid NAND_ECC_MODE %d\n", ecc->mode);
+		ret = -EINVAL;
+		goto err_free;
 	}
 
 	/* For many systems, the standard OOB write also works for raw */
@@ -4293,20 +4461,9 @@ int nand_scan_tail(struct mtd_info *mtd)
 	if (!ecc->write_oob_raw)
 		ecc->write_oob_raw = ecc->write_oob;
 
-	/*
-	 * The number of bytes available for a client to place data into
-	 * the out of band area.
-	 */
-	mtd->oobavail = 0;
-	if (ecc->layout) {
-		for (i = 0; ecc->layout->oobfree[i].length; i++)
-			mtd->oobavail += ecc->layout->oobfree[i].length;
-	}
-
-	/* ECC sanity check: warn if it's too weak */
-	if (!nand_ecc_strength_good(mtd))
-		pr_warn("WARNING: %s: the ECC used on your system is too weak compared to the one required by the NAND chip\n",
-			mtd->name);
+	/* propagate ecc info to mtd_info */
+	mtd->ecc_strength = ecc->strength;
+	mtd->ecc_step_size = ecc->size;
 
 	/*
 	 * Set the number of read / write steps for one page depending on ECC
@@ -4314,11 +4471,27 @@ int nand_scan_tail(struct mtd_info *mtd)
 	 */
 	ecc->steps = mtd->writesize / ecc->size;
 	if (ecc->steps * ecc->size != mtd->writesize) {
-		pr_warn("Invalid ECC parameters\n");
-		BUG();
+		WARN(1, "Invalid ECC parameters\n");
+		ret = -EINVAL;
+		goto err_free;
 	}
 	ecc->total = ecc->steps * ecc->bytes;
 
+	/*
+	 * The number of bytes available for a client to place data into
+	 * the out of band area.
+	 */
+	ret = mtd_ooblayout_count_freebytes(mtd);
+	if (ret < 0)
+		ret = 0;
+
+	mtd->oobavail = ret;
+
+	/* ECC sanity check: warn if it's too weak */
+	if (!nand_ecc_strength_good(mtd))
+		pr_warn("WARNING: %s: the ECC used on your system is too weak compared to the one required by the NAND chip\n",
+			mtd->name);
+
 	/* Allow subpage writes up to ecc.steps. Not possible for MLC flash */
 	if (!(chip->options & NAND_NO_SUBPAGE_WRITE) && nand_is_slc(chip)) {
 		switch (ecc->steps) {
@@ -4343,7 +4516,6 @@ int nand_scan_tail(struct mtd_info *mtd)
 	/* Large page NAND with SOFT_ECC should support subpage reads */
 	switch (ecc->mode) {
 	case NAND_ECC_SOFT:
-	case NAND_ECC_SOFT_BCH:
 		if (chip->page_shift > 9)
 			chip->options |= NAND_SUBPAGE_READ;
 		break;
@@ -4375,10 +4547,6 @@ int nand_scan_tail(struct mtd_info *mtd)
 	mtd->_block_markbad = nand_block_markbad;
 	mtd->writebufsize = mtd->writesize;
 
-	/* propagate ecc info to mtd_info */
-	mtd->ecclayout = ecc->layout;
-	mtd->ecc_strength = ecc->strength;
-	mtd->ecc_step_size = ecc->size;
 	/*
 	 * Initialize bitflip_threshold to its default prior scan_bbt() call.
 	 * scan_bbt() might invoke mtd_read(), thus bitflip_threshold must be
@@ -4393,6 +4561,10 @@ int nand_scan_tail(struct mtd_info *mtd)
 
 	/* Build bad block table */
 	return chip->scan_bbt(mtd);
+err_free:
+	if (!(chip->options & NAND_OWN_BUFFERS))
+		kfree(chip->buffers);
+	return ret;
 }
 EXPORT_SYMBOL(nand_scan_tail);
 
@@ -4436,7 +4608,8 @@ void nand_release(struct mtd_info *mtd)
 {
 	struct nand_chip *chip = mtd_to_nand(mtd);
 
-	if (chip->ecc.mode == NAND_ECC_SOFT_BCH)
+	if (chip->ecc.mode == NAND_ECC_SOFT &&
+	    chip->ecc.algo == NAND_ECC_BCH)
 		nand_bch_free((struct nand_bch_control *)chip->ecc.priv);
 
 	mtd_device_unregister(mtd);
diff --git a/drivers/mtd/nand/nand_bch.c b/drivers/mtd/nand/nand_bch.c
index b585bae..44763f8 100644
--- a/drivers/mtd/nand/nand_bch.c
+++ b/drivers/mtd/nand/nand_bch.c
@@ -32,13 +32,11 @@
 /**
  * struct nand_bch_control - private NAND BCH control structure
  * @bch:       BCH control structure
- * @ecclayout: private ecc layout for this BCH configuration
  * @errloc:    error location array
  * @eccmask:   XOR ecc mask, allows erased pages to be decoded as valid
  */
 struct nand_bch_control {
 	struct bch_control   *bch;
-	struct nand_ecclayout ecclayout;
 	unsigned int         *errloc;
 	unsigned char        *eccmask;
 };
@@ -124,7 +122,6 @@ struct nand_bch_control *nand_bch_init(struct mtd_info *mtd)
 {
 	struct nand_chip *nand = mtd_to_nand(mtd);
 	unsigned int m, t, eccsteps, i;
-	struct nand_ecclayout *layout = nand->ecc.layout;
 	struct nand_bch_control *nbc = NULL;
 	unsigned char *erased_page;
 	unsigned int eccsize = nand->ecc.size;
@@ -161,34 +158,10 @@ struct nand_bch_control *nand_bch_init(struct mtd_info *mtd)
 
 	eccsteps = mtd->writesize/eccsize;
 
-	/* if no ecc placement scheme was provided, build one */
-	if (!layout) {
-
-		/* handle large page devices only */
-		if (mtd->oobsize < 64) {
-			printk(KERN_WARNING "must provide an oob scheme for "
-			       "oobsize %d\n", mtd->oobsize);
-			goto fail;
-		}
-
-		layout = &nbc->ecclayout;
-		layout->eccbytes = eccsteps*eccbytes;
-
-		/* reserve 2 bytes for bad block marker */
-		if (layout->eccbytes+2 > mtd->oobsize) {
-			printk(KERN_WARNING "no suitable oob scheme available "
-			       "for oobsize %d eccbytes %u\n", mtd->oobsize,
-			       eccbytes);
-			goto fail;
-		}
-		/* put ecc bytes at oob tail */
-		for (i = 0; i < layout->eccbytes; i++)
-			layout->eccpos[i] = mtd->oobsize-layout->eccbytes+i;
-
-		layout->oobfree[0].offset = 2;
-		layout->oobfree[0].length = mtd->oobsize-2-layout->eccbytes;
-
-		nand->ecc.layout = layout;
+	/* Check that we have an oob layout description. */
+	if (!mtd->ooblayout) {
+		pr_warn("missing oob scheme");
+		goto fail;
 	}
 
 	/* sanity checks */
@@ -196,7 +169,18 @@ struct nand_bch_control *nand_bch_init(struct mtd_info *mtd)
 		printk(KERN_WARNING "eccsize %u is too large\n", eccsize);
 		goto fail;
 	}
-	if (layout->eccbytes != (eccsteps*eccbytes)) {
+
+	/*
+	 * ecc->steps and ecc->total might be used by mtd->ooblayout->ecc(),
+	 * which is called by mtd_ooblayout_count_eccbytes().
+	 * Make sure they are properly initialized before calling
+	 * mtd_ooblayout_count_eccbytes().
+	 * FIXME: we should probably rework the sequencing in nand_scan_tail()
+	 * to avoid setting those fields twice.
+	 */
+	nand->ecc.steps = eccsteps;
+	nand->ecc.total = eccsteps * eccbytes;
+	if (mtd_ooblayout_count_eccbytes(mtd) != (eccsteps*eccbytes)) {
 		printk(KERN_WARNING "invalid ecc layout\n");
 		goto fail;
 	}
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index a58169a2..1eb9344 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -569,7 +569,7 @@ static void nandsim_debugfs_remove(struct nandsim *ns)
  *
  * RETURNS: 0 if success, -ENOMEM if memory alloc fails.
  */
-static int alloc_device(struct nandsim *ns)
+static int __init alloc_device(struct nandsim *ns)
 {
 	struct file *cfile;
 	int i, err;
@@ -654,7 +654,7 @@ static void free_device(struct nandsim *ns)
 	}
 }
 
-static char *get_partition_name(int i)
+static char __init *get_partition_name(int i)
 {
 	return kasprintf(GFP_KERNEL, "NAND simulator partition %d", i);
 }
@@ -664,7 +664,7 @@ static char *get_partition_name(int i)
  *
  * RETURNS: 0 if success, -ERRNO if failure.
  */
-static int init_nandsim(struct mtd_info *mtd)
+static int __init init_nandsim(struct mtd_info *mtd)
 {
 	struct nand_chip *chip = mtd_to_nand(mtd);
 	struct nandsim   *ns   = nand_get_controller_data(chip);
@@ -2261,6 +2261,7 @@ static int __init ns_init_module(void)
 	chip->read_buf   = ns_nand_read_buf;
 	chip->read_word  = ns_nand_read_word;
 	chip->ecc.mode   = NAND_ECC_SOFT;
+	chip->ecc.algo   = NAND_ECC_HAMMING;
 	/* The NAND_SKIP_BBTSCAN option is necessary for 'overridesize' */
 	/* and 'badblocks' parameters to work */
 	chip->options   |= NAND_SKIP_BBTSCAN;
@@ -2338,7 +2339,8 @@ static int __init ns_init_module(void)
 			retval = -EINVAL;
 			goto error;
 		}
-		chip->ecc.mode = NAND_ECC_SOFT_BCH;
+		chip->ecc.mode = NAND_ECC_SOFT;
+		chip->ecc.algo = NAND_ECC_BCH;
 		chip->ecc.size = 512;
 		chip->ecc.strength = bch;
 		chip->ecc.bytes = eccbytes;
diff --git a/drivers/mtd/nand/nuc900_nand.c b/drivers/mtd/nand/nuc900_nand.c
index dbc5b57..8f64011 100644
--- a/drivers/mtd/nand/nuc900_nand.c
+++ b/drivers/mtd/nand/nuc900_nand.c
@@ -261,6 +261,7 @@ static int nuc900_nand_probe(struct platform_device *pdev)
 	chip->chip_delay	= 50;
 	chip->options		= 0;
 	chip->ecc.mode		= NAND_ECC_SOFT;
+	chip->ecc.algo		= NAND_ECC_HAMMING;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	nuc900_nand->reg = devm_ioremap_resource(&pdev->dev, res);
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index 0749ca1..08e1588 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -12,6 +12,7 @@
 #include <linux/dmaengine.h>
 #include <linux/dma-mapping.h>
 #include <linux/delay.h>
+#include <linux/gpio/consumer.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/jiffies.h>
@@ -28,6 +29,7 @@
 #include <linux/mtd/nand_bch.h>
 #include <linux/platform_data/elm.h>
 
+#include <linux/omap-gpmc.h>
 #include <linux/platform_data/mtd-nand-omap2.h>
 
 #define	DRIVER_NAME	"omap2-nand"
@@ -151,13 +153,17 @@ static struct nand_hw_control omap_gpmc_controller = {
 };
 
 struct omap_nand_info {
-	struct omap_nand_platform_data	*pdata;
 	struct nand_chip		nand;
 	struct platform_device		*pdev;
 
 	int				gpmc_cs;
-	unsigned long			phys_base;
+	bool				dev_ready;
+	enum nand_io			xfer_type;
+	int				devsize;
 	enum omap_ecc			ecc_opt;
+	struct device_node		*elm_of_node;
+
+	unsigned long			phys_base;
 	struct completion		comp;
 	struct dma_chan			*dma;
 	int				gpmc_irq_fifo;
@@ -168,12 +174,14 @@ struct omap_nand_info {
 	} iomode;
 	u_char				*buf;
 	int					buf_len;
+	/* Interface to GPMC */
 	struct gpmc_nand_regs		reg;
-	/* generated at runtime depending on ECC algorithm and layout selected */
-	struct nand_ecclayout		oobinfo;
+	struct gpmc_nand_ops		*ops;
+	bool				flash_bbt;
 	/* fields specific for BCHx_HW ECC scheme */
 	struct device			*elm_dev;
-	struct device_node		*of_node;
+	/* NAND ready gpio */
+	struct gpio_desc		*ready_gpiod;
 };
 
 static inline struct omap_nand_info *mtd_to_omap(struct mtd_info *mtd)
@@ -208,7 +216,7 @@ static int omap_prefetch_enable(int cs, int fifo_th, int dma_mode,
 	 */
 	val = ((cs << PREFETCH_CONFIG1_CS_SHIFT) |
 		PREFETCH_FIFOTHRESHOLD(fifo_th) | ENABLE_PREFETCH |
-		(dma_mode << DMA_MPU_MODE_SHIFT) | (0x1 & is_write));
+		(dma_mode << DMA_MPU_MODE_SHIFT) | (is_write & 0x1));
 	writel(val, info->reg.gpmc_prefetch_config1);
 
 	/*  Start the prefetch engine */
@@ -288,14 +296,13 @@ static void omap_write_buf8(struct mtd_info *mtd, const u_char *buf, int len)
 {
 	struct omap_nand_info *info = mtd_to_omap(mtd);
 	u_char *p = (u_char *)buf;
-	u32	status = 0;
+	bool status;
 
 	while (len--) {
 		iowrite8(*p++, info->nand.IO_ADDR_W);
 		/* wait until buffer is available for write */
 		do {
-			status = readl(info->reg.gpmc_status) &
-					STATUS_BUFF_EMPTY;
+			status = info->ops->nand_writebuffer_empty();
 		} while (!status);
 	}
 }
@@ -323,7 +330,7 @@ static void omap_write_buf16(struct mtd_info *mtd, const u_char * buf, int len)
 {
 	struct omap_nand_info *info = mtd_to_omap(mtd);
 	u16 *p = (u16 *) buf;
-	u32	status = 0;
+	bool status;
 	/* FIXME try bursts of writesw() or DMA ... */
 	len >>= 1;
 
@@ -331,8 +338,7 @@ static void omap_write_buf16(struct mtd_info *mtd, const u_char * buf, int len)
 		iowrite16(*p++, info->nand.IO_ADDR_W);
 		/* wait until buffer is available for write */
 		do {
-			status = readl(info->reg.gpmc_status) &
-					STATUS_BUFF_EMPTY;
+			status = info->ops->nand_writebuffer_empty();
 		} while (!status);
 	}
 }
@@ -467,17 +473,8 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
 	int ret;
 	u32 val;
 
-	if (addr >= high_memory) {
-		struct page *p1;
-
-		if (((size_t)addr & PAGE_MASK) !=
-			((size_t)(addr + len - 1) & PAGE_MASK))
-			goto out_copy;
-		p1 = vmalloc_to_page(addr);
-		if (!p1)
-			goto out_copy;
-		addr = page_address(p1) + ((size_t)addr & ~PAGE_MASK);
-	}
+	if (!virt_addr_valid(addr))
+		goto out_copy;
 
 	sg_init_one(&sg, addr, len);
 	n = dma_map_sg(info->dma->device->dev, &sg, 1, dir);
@@ -497,6 +494,11 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
 	tx->callback_param = &info->comp;
 	dmaengine_submit(tx);
 
+	init_completion(&info->comp);
+
+	/* setup and start DMA using dma_addr */
+	dma_async_issue_pending(info->dma);
+
 	/*  configure and start prefetch transfer */
 	ret = omap_prefetch_enable(info->gpmc_cs,
 		PREFETCH_FIFOTHRESHOLD_MAX, 0x1, len, is_write, info);
@@ -504,10 +506,6 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
 		/* PFPW engine is busy, use cpu copy method */
 		goto out_copy_unmap;
 
-	init_completion(&info->comp);
-	dma_async_issue_pending(info->dma);
-
-	/* setup and start DMA using dma_addr */
 	wait_for_completion(&info->comp);
 	tim = 0;
 	limit = (loops_per_jiffy * msecs_to_jiffies(OMAP_NAND_TIMEOUT_MS));
@@ -1017,21 +1015,16 @@ static int omap_wait(struct mtd_info *mtd, struct nand_chip *chip)
 }
 
 /**
- * omap_dev_ready - calls the platform specific dev_ready function
+ * omap_dev_ready - checks the NAND Ready GPIO line
  * @mtd: MTD device structure
+ *
+ * Returns true if ready and false if busy.
  */
 static int omap_dev_ready(struct mtd_info *mtd)
 {
-	unsigned int val = 0;
 	struct omap_nand_info *info = mtd_to_omap(mtd);
 
-	val = readl(info->reg.gpmc_status);
-
-	if ((val & 0x100) == 0x100) {
-		return 1;
-	} else {
-		return 0;
-	}
+	return gpiod_get_value(info->ready_gpiod);
 }
 
 /**
@@ -1495,9 +1488,8 @@ static int omap_elm_correct_data(struct mtd_info *mtd, u_char *data,
 static int omap_write_page_bch(struct mtd_info *mtd, struct nand_chip *chip,
 			       const uint8_t *buf, int oob_required, int page)
 {
-	int i;
+	int ret;
 	uint8_t *ecc_calc = chip->buffers->ecccalc;
-	uint32_t *eccpos = chip->ecc.layout->eccpos;
 
 	/* Enable GPMC ecc engine */
 	chip->ecc.hwctl(mtd, NAND_ECC_WRITE);
@@ -1508,8 +1500,10 @@ static int omap_write_page_bch(struct mtd_info *mtd, struct nand_chip *chip,
 	/* Update ecc vector from GPMC result registers */
 	chip->ecc.calculate(mtd, buf, &ecc_calc[0]);
 
-	for (i = 0; i < chip->ecc.total; i++)
-		chip->oob_poi[eccpos[i]] = ecc_calc[i];
+	ret = mtd_ooblayout_set_eccbytes(mtd, ecc_calc, chip->oob_poi, 0,
+					 chip->ecc.total);
+	if (ret)
+		return ret;
 
 	/* Write ecc vector to OOB area */
 	chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
@@ -1536,10 +1530,7 @@ static int omap_read_page_bch(struct mtd_info *mtd, struct nand_chip *chip,
 {
 	uint8_t *ecc_calc = chip->buffers->ecccalc;
 	uint8_t *ecc_code = chip->buffers->ecccode;
-	uint32_t *eccpos = chip->ecc.layout->eccpos;
-	uint8_t *oob = &chip->oob_poi[eccpos[0]];
-	uint32_t oob_pos = mtd->writesize + chip->ecc.layout->eccpos[0];
-	int stat;
+	int stat, ret;
 	unsigned int max_bitflips = 0;
 
 	/* Enable GPMC ecc engine */
@@ -1549,13 +1540,18 @@ static int omap_read_page_bch(struct mtd_info *mtd, struct nand_chip *chip,
 	chip->read_buf(mtd, buf, mtd->writesize);
 
 	/* Read oob bytes */
-	chip->cmdfunc(mtd, NAND_CMD_RNDOUT, oob_pos, -1);
-	chip->read_buf(mtd, oob, chip->ecc.total);
+	chip->cmdfunc(mtd, NAND_CMD_RNDOUT,
+		      mtd->writesize + BADBLOCK_MARKER_LENGTH, -1);
+	chip->read_buf(mtd, chip->oob_poi + BADBLOCK_MARKER_LENGTH,
+		       chip->ecc.total);
 
 	/* Calculate ecc bytes */
 	chip->ecc.calculate(mtd, buf, ecc_calc);
 
-	memcpy(ecc_code, &chip->oob_poi[eccpos[0]], chip->ecc.total);
+	ret = mtd_ooblayout_get_eccbytes(mtd, ecc_code, chip->oob_poi, 0,
+					 chip->ecc.total);
+	if (ret)
+		return ret;
 
 	stat = chip->ecc.correct(mtd, buf, ecc_code, ecc_calc);
 
@@ -1630,7 +1626,7 @@ static bool omap2_nand_ecc_check(struct omap_nand_info *info,
 			"CONFIG_MTD_NAND_OMAP_BCH not enabled\n");
 		return false;
 	}
-	if (ecc_needs_elm && !is_elm_present(info, pdata->elm_of_node)) {
+	if (ecc_needs_elm && !is_elm_present(info, info->elm_of_node)) {
 		dev_err(&info->pdev->dev, "ELM not available\n");
 		return false;
 	}
@@ -1638,43 +1634,227 @@ static bool omap2_nand_ecc_check(struct omap_nand_info *info,
 	return true;
 }
 
+static const char * const nand_xfer_types[] = {
+	[NAND_OMAP_PREFETCH_POLLED] = "prefetch-polled",
+	[NAND_OMAP_POLLED] = "polled",
+	[NAND_OMAP_PREFETCH_DMA] = "prefetch-dma",
+	[NAND_OMAP_PREFETCH_IRQ] = "prefetch-irq",
+};
+
+static int omap_get_dt_info(struct device *dev, struct omap_nand_info *info)
+{
+	struct device_node *child = dev->of_node;
+	int i;
+	const char *s;
+	u32 cs;
+
+	if (of_property_read_u32(child, "reg", &cs) < 0) {
+		dev_err(dev, "reg not found in DT\n");
+		return -EINVAL;
+	}
+
+	info->gpmc_cs = cs;
+
+	/* detect availability of ELM module. Won't be present pre-OMAP4 */
+	info->elm_of_node = of_parse_phandle(child, "ti,elm-id", 0);
+	if (!info->elm_of_node)
+		dev_dbg(dev, "ti,elm-id not in DT\n");
+
+	/* select ecc-scheme for NAND */
+	if (of_property_read_string(child, "ti,nand-ecc-opt", &s)) {
+		dev_err(dev, "ti,nand-ecc-opt not found\n");
+		return -EINVAL;
+	}
+
+	if (!strcmp(s, "sw")) {
+		info->ecc_opt = OMAP_ECC_HAM1_CODE_SW;
+	} else if (!strcmp(s, "ham1") ||
+		   !strcmp(s, "hw") || !strcmp(s, "hw-romcode")) {
+		info->ecc_opt =	OMAP_ECC_HAM1_CODE_HW;
+	} else if (!strcmp(s, "bch4")) {
+		if (info->elm_of_node)
+			info->ecc_opt = OMAP_ECC_BCH4_CODE_HW;
+		else
+			info->ecc_opt = OMAP_ECC_BCH4_CODE_HW_DETECTION_SW;
+	} else if (!strcmp(s, "bch8")) {
+		if (info->elm_of_node)
+			info->ecc_opt = OMAP_ECC_BCH8_CODE_HW;
+		else
+			info->ecc_opt = OMAP_ECC_BCH8_CODE_HW_DETECTION_SW;
+	} else if (!strcmp(s, "bch16")) {
+		info->ecc_opt =	OMAP_ECC_BCH16_CODE_HW;
+	} else {
+		dev_err(dev, "unrecognized value for ti,nand-ecc-opt\n");
+		return -EINVAL;
+	}
+
+	/* select data transfer mode */
+	if (!of_property_read_string(child, "ti,nand-xfer-type", &s)) {
+		for (i = 0; i < ARRAY_SIZE(nand_xfer_types); i++) {
+			if (!strcasecmp(s, nand_xfer_types[i])) {
+				info->xfer_type = i;
+				return 0;
+			}
+		}
+
+		dev_err(dev, "unrecognized value for ti,nand-xfer-type\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int omap_ooblayout_ecc(struct mtd_info *mtd, int section,
+			      struct mtd_oob_region *oobregion)
+{
+	struct omap_nand_info *info = mtd_to_omap(mtd);
+	struct nand_chip *chip = &info->nand;
+	int off = BADBLOCK_MARKER_LENGTH;
+
+	if (info->ecc_opt == OMAP_ECC_HAM1_CODE_HW &&
+	    !(chip->options & NAND_BUSWIDTH_16))
+		off = 1;
+
+	if (section)
+		return -ERANGE;
+
+	oobregion->offset = off;
+	oobregion->length = chip->ecc.total;
+
+	return 0;
+}
+
+static int omap_ooblayout_free(struct mtd_info *mtd, int section,
+			       struct mtd_oob_region *oobregion)
+{
+	struct omap_nand_info *info = mtd_to_omap(mtd);
+	struct nand_chip *chip = &info->nand;
+	int off = BADBLOCK_MARKER_LENGTH;
+
+	if (info->ecc_opt == OMAP_ECC_HAM1_CODE_HW &&
+	    !(chip->options & NAND_BUSWIDTH_16))
+		off = 1;
+
+	if (section)
+		return -ERANGE;
+
+	off += chip->ecc.total;
+	if (off >= mtd->oobsize)
+		return -ERANGE;
+
+	oobregion->offset = off;
+	oobregion->length = mtd->oobsize - off;
+
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops omap_ooblayout_ops = {
+	.ecc = omap_ooblayout_ecc,
+	.free = omap_ooblayout_free,
+};
+
+static int omap_sw_ooblayout_ecc(struct mtd_info *mtd, int section,
+				 struct mtd_oob_region *oobregion)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
+	int off = BADBLOCK_MARKER_LENGTH;
+
+	if (section >= chip->ecc.steps)
+		return -ERANGE;
+
+	/*
+	 * When SW correction is employed, one OMAP specific marker byte is
+	 * reserved after each ECC step.
+	 */
+	oobregion->offset = off + (section * (chip->ecc.bytes + 1));
+	oobregion->length = chip->ecc.bytes;
+
+	return 0;
+}
+
+static int omap_sw_ooblayout_free(struct mtd_info *mtd, int section,
+				  struct mtd_oob_region *oobregion)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
+	int off = BADBLOCK_MARKER_LENGTH;
+
+	if (section)
+		return -ERANGE;
+
+	/*
+	 * When SW correction is employed, one OMAP specific marker byte is
+	 * reserved after each ECC step.
+	 */
+	off += ((chip->ecc.bytes + 1) * chip->ecc.steps);
+	if (off >= mtd->oobsize)
+		return -ERANGE;
+
+	oobregion->offset = off;
+	oobregion->length = mtd->oobsize - off;
+
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops omap_sw_ooblayout_ops = {
+	.ecc = omap_sw_ooblayout_ecc,
+	.free = omap_sw_ooblayout_free,
+};
+
 static int omap_nand_probe(struct platform_device *pdev)
 {
 	struct omap_nand_info		*info;
-	struct omap_nand_platform_data	*pdata;
+	struct omap_nand_platform_data	*pdata = NULL;
 	struct mtd_info			*mtd;
 	struct nand_chip		*nand_chip;
-	struct nand_ecclayout		*ecclayout;
 	int				err;
-	int				i;
 	dma_cap_mask_t			mask;
 	unsigned			sig;
-	unsigned			oob_index;
 	struct resource			*res;
-
-	pdata = dev_get_platdata(&pdev->dev);
-	if (pdata == NULL) {
-		dev_err(&pdev->dev, "platform data missing\n");
-		return -ENODEV;
-	}
+	struct device			*dev = &pdev->dev;
+	int				min_oobbytes = BADBLOCK_MARKER_LENGTH;
+	int				oobbytes_per_step;
 
 	info = devm_kzalloc(&pdev->dev, sizeof(struct omap_nand_info),
 				GFP_KERNEL);
 	if (!info)
 		return -ENOMEM;
 
+	info->pdev = pdev;
+
+	if (dev->of_node) {
+		if (omap_get_dt_info(dev, info))
+			return -EINVAL;
+	} else {
+		pdata = dev_get_platdata(&pdev->dev);
+		if (!pdata) {
+			dev_err(&pdev->dev, "platform data missing\n");
+			return -EINVAL;
+		}
+
+		info->gpmc_cs = pdata->cs;
+		info->reg = pdata->reg;
+		info->ecc_opt = pdata->ecc_opt;
+		if (pdata->dev_ready)
+			dev_info(&pdev->dev, "pdata->dev_ready is deprecated\n");
+
+		info->xfer_type = pdata->xfer_type;
+		info->devsize = pdata->devsize;
+		info->elm_of_node = pdata->elm_of_node;
+		info->flash_bbt = pdata->flash_bbt;
+	}
+
 	platform_set_drvdata(pdev, info);
+	info->ops = gpmc_omap_get_nand_ops(&info->reg, info->gpmc_cs);
+	if (!info->ops) {
+		dev_err(&pdev->dev, "Failed to get GPMC->NAND interface\n");
+		return -ENODEV;
+	}
 
-	info->pdev		= pdev;
-	info->gpmc_cs		= pdata->cs;
-	info->reg		= pdata->reg;
-	info->of_node		= pdata->of_node;
-	info->ecc_opt		= pdata->ecc_opt;
 	nand_chip		= &info->nand;
 	mtd			= nand_to_mtd(nand_chip);
 	mtd->dev.parent		= &pdev->dev;
 	nand_chip->ecc.priv	= NULL;
-	nand_set_flash_node(nand_chip, pdata->of_node);
+	nand_set_flash_node(nand_chip, dev->of_node);
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	nand_chip->IO_ADDR_R = devm_ioremap_resource(&pdev->dev, res);
@@ -1688,6 +1868,13 @@ static int omap_nand_probe(struct platform_device *pdev)
 	nand_chip->IO_ADDR_W = nand_chip->IO_ADDR_R;
 	nand_chip->cmd_ctrl  = omap_hwcontrol;
 
+	info->ready_gpiod = devm_gpiod_get_optional(&pdev->dev, "rb",
+						    GPIOD_IN);
+	if (IS_ERR(info->ready_gpiod)) {
+		dev_err(dev, "failed to get ready gpio\n");
+		return PTR_ERR(info->ready_gpiod);
+	}
+
 	/*
 	 * If RDY/BSY line is connected to OMAP then use the omap ready
 	 * function and the generic nand_wait function which reads the status
@@ -1695,7 +1882,7 @@ static int omap_nand_probe(struct platform_device *pdev)
 	 * chip delay which is slightly more than tR (AC Timing) of the NAND
 	 * device and read status register until you get a failure or success
 	 */
-	if (pdata->dev_ready) {
+	if (info->ready_gpiod) {
 		nand_chip->dev_ready = omap_dev_ready;
 		nand_chip->chip_delay = 0;
 	} else {
@@ -1703,21 +1890,25 @@ static int omap_nand_probe(struct platform_device *pdev)
 		nand_chip->chip_delay = 50;
 	}
 
-	if (pdata->flash_bbt)
-		nand_chip->bbt_options |= NAND_BBT_USE_FLASH | NAND_BBT_NO_OOB;
-	else
-		nand_chip->options |= NAND_SKIP_BBTSCAN;
+	if (info->flash_bbt)
+		nand_chip->bbt_options |= NAND_BBT_USE_FLASH;
 
 	/* scan NAND device connected to chip controller */
-	nand_chip->options |= pdata->devsize & NAND_BUSWIDTH_16;
+	nand_chip->options |= info->devsize & NAND_BUSWIDTH_16;
 	if (nand_scan_ident(mtd, 1, NULL)) {
-		dev_err(&info->pdev->dev, "scan failed, may be bus-width mismatch\n");
+		dev_err(&info->pdev->dev,
+			"scan failed, may be bus-width mismatch\n");
 		err = -ENXIO;
 		goto return_error;
 	}
 
+	if (nand_chip->bbt_options & NAND_BBT_USE_FLASH)
+		nand_chip->bbt_options |= NAND_BBT_NO_OOB;
+	else
+		nand_chip->options |= NAND_SKIP_BBTSCAN;
+
 	/* re-populate low-level callbacks based on xfer modes */
-	switch (pdata->xfer_type) {
+	switch (info->xfer_type) {
 	case NAND_OMAP_PREFETCH_POLLED:
 		nand_chip->read_buf   = omap_read_buf_pref;
 		nand_chip->write_buf  = omap_write_buf_pref;
@@ -1797,7 +1988,7 @@ static int omap_nand_probe(struct platform_device *pdev)
 
 	default:
 		dev_err(&pdev->dev,
-			"xfer_type(%d) not supported!\n", pdata->xfer_type);
+			"xfer_type(%d) not supported!\n", info->xfer_type);
 		err = -EINVAL;
 		goto return_error;
 	}
@@ -1809,16 +2000,15 @@ static int omap_nand_probe(struct platform_device *pdev)
 
 	/*
 	 * Bail out earlier to let NAND_ECC_SOFT code create its own
-	 * ecclayout instead of using ours.
+	 * ooblayout instead of using ours.
 	 */
 	if (info->ecc_opt == OMAP_ECC_HAM1_CODE_SW) {
 		nand_chip->ecc.mode = NAND_ECC_SOFT;
+		nand_chip->ecc.algo = NAND_ECC_HAMMING;
 		goto scan_tail;
 	}
 
 	/* populate MTD interface based on ECC scheme */
-	ecclayout		= &info->oobinfo;
-	nand_chip->ecc.layout	= ecclayout;
 	switch (info->ecc_opt) {
 	case OMAP_ECC_HAM1_CODE_HW:
 		pr_info("nand: using OMAP_ECC_HAM1_CODE_HW\n");
@@ -1829,19 +2019,12 @@ static int omap_nand_probe(struct platform_device *pdev)
 		nand_chip->ecc.calculate        = omap_calculate_ecc;
 		nand_chip->ecc.hwctl            = omap_enable_hwecc;
 		nand_chip->ecc.correct          = omap_correct_data;
-		/* define ECC layout */
-		ecclayout->eccbytes		= nand_chip->ecc.bytes *
-							(mtd->writesize /
-							nand_chip->ecc.size);
-		if (nand_chip->options & NAND_BUSWIDTH_16)
-			oob_index		= BADBLOCK_MARKER_LENGTH;
-		else
-			oob_index		= 1;
-		for (i = 0; i < ecclayout->eccbytes; i++, oob_index++)
-			ecclayout->eccpos[i]	= oob_index;
-		/* no reserved-marker in ecclayout for this ecc-scheme */
-		ecclayout->oobfree->offset	=
-				ecclayout->eccpos[ecclayout->eccbytes - 1] + 1;
+		mtd_set_ooblayout(mtd, &omap_ooblayout_ops);
+		oobbytes_per_step		= nand_chip->ecc.bytes;
+
+		if (!(nand_chip->options & NAND_BUSWIDTH_16))
+			min_oobbytes		= 1;
+
 		break;
 
 	case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW:
@@ -1853,19 +2036,9 @@ static int omap_nand_probe(struct platform_device *pdev)
 		nand_chip->ecc.hwctl		= omap_enable_hwecc_bch;
 		nand_chip->ecc.correct		= nand_bch_correct_data;
 		nand_chip->ecc.calculate	= omap_calculate_ecc_bch;
-		/* define ECC layout */
-		ecclayout->eccbytes		= nand_chip->ecc.bytes *
-							(mtd->writesize /
-							nand_chip->ecc.size);
-		oob_index			= BADBLOCK_MARKER_LENGTH;
-		for (i = 0; i < ecclayout->eccbytes; i++, oob_index++) {
-			ecclayout->eccpos[i] = oob_index;
-			if (((i + 1) % nand_chip->ecc.bytes) == 0)
-				oob_index++;
-		}
-		/* include reserved-marker in ecclayout->oobfree calculation */
-		ecclayout->oobfree->offset	= 1 +
-				ecclayout->eccpos[ecclayout->eccbytes - 1] + 1;
+		mtd_set_ooblayout(mtd, &omap_sw_ooblayout_ops);
+		/* Reserve one byte for the OMAP marker */
+		oobbytes_per_step		= nand_chip->ecc.bytes + 1;
 		/* software bch library is used for locating errors */
 		nand_chip->ecc.priv		= nand_bch_init(mtd);
 		if (!nand_chip->ecc.priv) {
@@ -1887,16 +2060,8 @@ static int omap_nand_probe(struct platform_device *pdev)
 		nand_chip->ecc.calculate	= omap_calculate_ecc_bch;
 		nand_chip->ecc.read_page	= omap_read_page_bch;
 		nand_chip->ecc.write_page	= omap_write_page_bch;
-		/* define ECC layout */
-		ecclayout->eccbytes		= nand_chip->ecc.bytes *
-							(mtd->writesize /
-							nand_chip->ecc.size);
-		oob_index			= BADBLOCK_MARKER_LENGTH;
-		for (i = 0; i < ecclayout->eccbytes; i++, oob_index++)
-			ecclayout->eccpos[i]	= oob_index;
-		/* reserved marker already included in ecclayout->eccbytes */
-		ecclayout->oobfree->offset	=
-				ecclayout->eccpos[ecclayout->eccbytes - 1] + 1;
+		mtd_set_ooblayout(mtd, &omap_ooblayout_ops);
+		oobbytes_per_step		= nand_chip->ecc.bytes;
 
 		err = elm_config(info->elm_dev, BCH4_ECC,
 				 mtd->writesize / nand_chip->ecc.size,
@@ -1914,19 +2079,9 @@ static int omap_nand_probe(struct platform_device *pdev)
 		nand_chip->ecc.hwctl		= omap_enable_hwecc_bch;
 		nand_chip->ecc.correct		= nand_bch_correct_data;
 		nand_chip->ecc.calculate	= omap_calculate_ecc_bch;
-		/* define ECC layout */
-		ecclayout->eccbytes		= nand_chip->ecc.bytes *
-							(mtd->writesize /
-							nand_chip->ecc.size);
-		oob_index			= BADBLOCK_MARKER_LENGTH;
-		for (i = 0; i < ecclayout->eccbytes; i++, oob_index++) {
-			ecclayout->eccpos[i] = oob_index;
-			if (((i + 1) % nand_chip->ecc.bytes) == 0)
-				oob_index++;
-		}
-		/* include reserved-marker in ecclayout->oobfree calculation */
-		ecclayout->oobfree->offset	= 1 +
-				ecclayout->eccpos[ecclayout->eccbytes - 1] + 1;
+		mtd_set_ooblayout(mtd, &omap_sw_ooblayout_ops);
+		/* Reserve one byte for the OMAP marker */
+		oobbytes_per_step		= nand_chip->ecc.bytes + 1;
 		/* software bch library is used for locating errors */
 		nand_chip->ecc.priv		= nand_bch_init(mtd);
 		if (!nand_chip->ecc.priv) {
@@ -1948,6 +2103,8 @@ static int omap_nand_probe(struct platform_device *pdev)
 		nand_chip->ecc.calculate	= omap_calculate_ecc_bch;
 		nand_chip->ecc.read_page	= omap_read_page_bch;
 		nand_chip->ecc.write_page	= omap_write_page_bch;
+		mtd_set_ooblayout(mtd, &omap_ooblayout_ops);
+		oobbytes_per_step		= nand_chip->ecc.bytes;
 
 		err = elm_config(info->elm_dev, BCH8_ECC,
 				 mtd->writesize / nand_chip->ecc.size,
@@ -1955,16 +2112,6 @@ static int omap_nand_probe(struct platform_device *pdev)
 		if (err < 0)
 			goto return_error;
 
-		/* define ECC layout */
-		ecclayout->eccbytes		= nand_chip->ecc.bytes *
-							(mtd->writesize /
-							nand_chip->ecc.size);
-		oob_index			= BADBLOCK_MARKER_LENGTH;
-		for (i = 0; i < ecclayout->eccbytes; i++, oob_index++)
-			ecclayout->eccpos[i]	= oob_index;
-		/* reserved marker already included in ecclayout->eccbytes */
-		ecclayout->oobfree->offset	=
-				ecclayout->eccpos[ecclayout->eccbytes - 1] + 1;
 		break;
 
 	case OMAP_ECC_BCH16_CODE_HW:
@@ -1978,6 +2125,8 @@ static int omap_nand_probe(struct platform_device *pdev)
 		nand_chip->ecc.calculate	= omap_calculate_ecc_bch;
 		nand_chip->ecc.read_page	= omap_read_page_bch;
 		nand_chip->ecc.write_page	= omap_write_page_bch;
+		mtd_set_ooblayout(mtd, &omap_ooblayout_ops);
+		oobbytes_per_step		= nand_chip->ecc.bytes;
 
 		err = elm_config(info->elm_dev, BCH16_ECC,
 				 mtd->writesize / nand_chip->ecc.size,
@@ -1985,16 +2134,6 @@ static int omap_nand_probe(struct platform_device *pdev)
 		if (err < 0)
 			goto return_error;
 
-		/* define ECC layout */
-		ecclayout->eccbytes		= nand_chip->ecc.bytes *
-							(mtd->writesize /
-							nand_chip->ecc.size);
-		oob_index			= BADBLOCK_MARKER_LENGTH;
-		for (i = 0; i < ecclayout->eccbytes; i++, oob_index++)
-			ecclayout->eccpos[i]	= oob_index;
-		/* reserved marker already included in ecclayout->eccbytes */
-		ecclayout->oobfree->offset	=
-				ecclayout->eccpos[ecclayout->eccbytes - 1] + 1;
 		break;
 	default:
 		dev_err(&info->pdev->dev, "invalid or unsupported ECC scheme\n");
@@ -2002,13 +2141,13 @@ static int omap_nand_probe(struct platform_device *pdev)
 		goto return_error;
 	}
 
-	/* all OOB bytes from oobfree->offset till end off OOB are free */
-	ecclayout->oobfree->length = mtd->oobsize - ecclayout->oobfree->offset;
 	/* check if NAND device's OOB is enough to store ECC signatures */
-	if (mtd->oobsize < (ecclayout->eccbytes + BADBLOCK_MARKER_LENGTH)) {
+	min_oobbytes += (oobbytes_per_step *
+			 (mtd->writesize / nand_chip->ecc.size));
+	if (mtd->oobsize < min_oobbytes) {
 		dev_err(&info->pdev->dev,
 			"not enough OOB bytes required = %d, available=%d\n",
-			ecclayout->eccbytes, mtd->oobsize);
+			min_oobbytes, mtd->oobsize);
 		err = -EINVAL;
 		goto return_error;
 	}
@@ -2020,7 +2159,10 @@ scan_tail:
 		goto return_error;
 	}
 
-	mtd_device_register(mtd, pdata->parts, pdata->nr_parts);
+	if (dev->of_node)
+		mtd_device_register(mtd, NULL, 0);
+	else
+		mtd_device_register(mtd, pdata->parts, pdata->nr_parts);
 
 	platform_set_drvdata(pdev, mtd);
 
@@ -2051,11 +2193,17 @@ static int omap_nand_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct of_device_id omap_nand_ids[] = {
+	{ .compatible = "ti,omap2-nand", },
+	{},
+};
+
 static struct platform_driver omap_nand_driver = {
 	.probe		= omap_nand_probe,
 	.remove		= omap_nand_remove,
 	.driver		= {
 		.name	= DRIVER_NAME,
+		.of_match_table = of_match_ptr(omap_nand_ids),
 	},
 };
 
diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c
index d4614bf..40a7c4a 100644
--- a/drivers/mtd/nand/orion_nand.c
+++ b/drivers/mtd/nand/orion_nand.c
@@ -130,6 +130,7 @@ static int __init orion_nand_probe(struct platform_device *pdev)
 	nc->cmd_ctrl = orion_nand_cmd_ctrl;
 	nc->read_buf = orion_nand_read_buf;
 	nc->ecc.mode = NAND_ECC_SOFT;
+	nc->ecc.algo = NAND_ECC_HAMMING;
 
 	if (board->chip_delay)
 		nc->chip_delay = board->chip_delay;
diff --git a/drivers/mtd/nand/pasemi_nand.c b/drivers/mtd/nand/pasemi_nand.c
index 3ab53ca..5de7591 100644
--- a/drivers/mtd/nand/pasemi_nand.c
+++ b/drivers/mtd/nand/pasemi_nand.c
@@ -92,8 +92,9 @@ int pasemi_device_ready(struct mtd_info *mtd)
 
 static int pasemi_nand_probe(struct platform_device *ofdev)
 {
+	struct device *dev = &ofdev->dev;
 	struct pci_dev *pdev;
-	struct device_node *np = ofdev->dev.of_node;
+	struct device_node *np = dev->of_node;
 	struct resource res;
 	struct nand_chip *chip;
 	int err = 0;
@@ -107,13 +108,11 @@ static int pasemi_nand_probe(struct platform_device *ofdev)
 	if (pasemi_nand_mtd)
 		return -ENODEV;
 
-	pr_debug("pasemi_nand at %pR\n", &res);
+	dev_dbg(dev, "pasemi_nand at %pR\n", &res);
 
 	/* Allocate memory for MTD device structure and private data */
 	chip = kzalloc(sizeof(struct nand_chip), GFP_KERNEL);
 	if (!chip) {
-		printk(KERN_WARNING
-		       "Unable to allocate PASEMI NAND MTD device structure\n");
 		err = -ENOMEM;
 		goto out;
 	}
@@ -121,7 +120,7 @@ static int pasemi_nand_probe(struct platform_device *ofdev)
 	pasemi_nand_mtd = nand_to_mtd(chip);
 
 	/* Link the private data with the MTD structure */
-	pasemi_nand_mtd->dev.parent = &ofdev->dev;
+	pasemi_nand_mtd->dev.parent = dev;
 
 	chip->IO_ADDR_R = of_iomap(np, 0);
 	chip->IO_ADDR_W = chip->IO_ADDR_R;
@@ -151,6 +150,7 @@ static int pasemi_nand_probe(struct platform_device *ofdev)
 	chip->write_buf = pasemi_write_buf;
 	chip->chip_delay = 0;
 	chip->ecc.mode = NAND_ECC_SOFT;
+	chip->ecc.algo = NAND_ECC_HAMMING;
 
 	/* Enable the following for a flash based bad block table */
 	chip->bbt_options = NAND_BBT_USE_FLASH;
@@ -162,13 +162,13 @@ static int pasemi_nand_probe(struct platform_device *ofdev)
 	}
 
 	if (mtd_device_register(pasemi_nand_mtd, NULL, 0)) {
-		printk(KERN_ERR "pasemi_nand: Unable to register MTD device\n");
+		dev_err(dev, "Unable to register MTD device\n");
 		err = -ENODEV;
 		goto out_lpc;
 	}
 
-	printk(KERN_INFO "PA Semi NAND flash at %08llx, control at I/O %x\n",
-	       res.start, lpcctl);
+	dev_info(dev, "PA Semi NAND flash at %pR, control at I/O %x\n", &res,
+		 lpcctl);
 
 	return 0;
 
diff --git a/drivers/mtd/nand/plat_nand.c b/drivers/mtd/nand/plat_nand.c
index e4e50da..415a53a 100644
--- a/drivers/mtd/nand/plat_nand.c
+++ b/drivers/mtd/nand/plat_nand.c
@@ -74,6 +74,7 @@ static int plat_nand_probe(struct platform_device *pdev)
 
 	data->chip.ecc.hwctl = pdata->ctrl.hwcontrol;
 	data->chip.ecc.mode = NAND_ECC_SOFT;
+	data->chip.ecc.algo = NAND_ECC_HAMMING;
 
 	platform_set_drvdata(pdev, data);
 
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index d650885..436dd6d 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -29,7 +29,6 @@
 #include <linux/slab.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
-#include <linux/of_mtd.h>
 #include <linux/platform_data/mtd-nand-pxa3xx.h>
 
 #define	CHIP_DELAY_TIMEOUT	msecs_to_jiffies(200)
@@ -324,6 +323,62 @@ static struct pxa3xx_nand_flash builtin_flash_types[] = {
 	{ 0xba20, 16, 16, &timing[3] },
 };
 
+static int pxa3xx_ooblayout_ecc(struct mtd_info *mtd, int section,
+				struct mtd_oob_region *oobregion)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
+	struct pxa3xx_nand_host *host = nand_get_controller_data(chip);
+	struct pxa3xx_nand_info *info = host->info_data;
+	int nchunks = mtd->writesize / info->chunk_size;
+
+	if (section >= nchunks)
+		return -ERANGE;
+
+	oobregion->offset = ((info->ecc_size + info->spare_size) * section) +
+			    info->spare_size;
+	oobregion->length = info->ecc_size;
+
+	return 0;
+}
+
+static int pxa3xx_ooblayout_free(struct mtd_info *mtd, int section,
+				 struct mtd_oob_region *oobregion)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
+	struct pxa3xx_nand_host *host = nand_get_controller_data(chip);
+	struct pxa3xx_nand_info *info = host->info_data;
+	int nchunks = mtd->writesize / info->chunk_size;
+
+	if (section >= nchunks)
+		return -ERANGE;
+
+	if (!info->spare_size)
+		return 0;
+
+	oobregion->offset = section * (info->ecc_size + info->spare_size);
+	oobregion->length = info->spare_size;
+	if (!section) {
+		/*
+		 * Bootrom looks in bytes 0 & 5 for bad blocks for the
+		 * 4KB page / 4bit BCH combination.
+		 */
+		if (mtd->writesize == 4096 && info->chunk_size == 2048) {
+			oobregion->offset += 6;
+			oobregion->length -= 6;
+		} else {
+			oobregion->offset += 2;
+			oobregion->length -= 2;
+		}
+	}
+
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops pxa3xx_ooblayout_ops = {
+	.ecc = pxa3xx_ooblayout_ecc,
+	.free = pxa3xx_ooblayout_free,
+};
+
 static u8 bbt_pattern[] = {'M', 'V', 'B', 'b', 't', '0' };
 static u8 bbt_mirror_pattern[] = {'1', 't', 'b', 'B', 'V', 'M' };
 
@@ -347,41 +402,6 @@ static struct nand_bbt_descr bbt_mirror_descr = {
 	.pattern = bbt_mirror_pattern
 };
 
-static struct nand_ecclayout ecc_layout_2KB_bch4bit = {
-	.eccbytes = 32,
-	.eccpos = {
-		32, 33, 34, 35, 36, 37, 38, 39,
-		40, 41, 42, 43, 44, 45, 46, 47,
-		48, 49, 50, 51, 52, 53, 54, 55,
-		56, 57, 58, 59, 60, 61, 62, 63},
-	.oobfree = { {2, 30} }
-};
-
-static struct nand_ecclayout ecc_layout_4KB_bch4bit = {
-	.eccbytes = 64,
-	.eccpos = {
-		32,  33,  34,  35,  36,  37,  38,  39,
-		40,  41,  42,  43,  44,  45,  46,  47,
-		48,  49,  50,  51,  52,  53,  54,  55,
-		56,  57,  58,  59,  60,  61,  62,  63,
-		96,  97,  98,  99,  100, 101, 102, 103,
-		104, 105, 106, 107, 108, 109, 110, 111,
-		112, 113, 114, 115, 116, 117, 118, 119,
-		120, 121, 122, 123, 124, 125, 126, 127},
-	/* Bootrom looks in bytes 0 & 5 for bad blocks */
-	.oobfree = { {6, 26}, { 64, 32} }
-};
-
-static struct nand_ecclayout ecc_layout_4KB_bch8bit = {
-	.eccbytes = 128,
-	.eccpos = {
-		32,  33,  34,  35,  36,  37,  38,  39,
-		40,  41,  42,  43,  44,  45,  46,  47,
-		48,  49,  50,  51,  52,  53,  54,  55,
-		56,  57,  58,  59,  60,  61,  62,  63},
-	.oobfree = { }
-};
-
 #define NDTR0_tCH(c)	(min((c), 7) << 19)
 #define NDTR0_tCS(c)	(min((c), 7) << 16)
 #define NDTR0_tWH(c)	(min((c), 7) << 11)
@@ -1546,9 +1566,12 @@ static void pxa3xx_nand_free_buff(struct pxa3xx_nand_info *info)
 }
 
 static int pxa_ecc_init(struct pxa3xx_nand_info *info,
-			struct nand_ecc_ctrl *ecc,
+			struct mtd_info *mtd,
 			int strength, int ecc_stepsize, int page_size)
 {
+	struct nand_chip *chip = mtd_to_nand(mtd);
+	struct nand_ecc_ctrl *ecc = &chip->ecc;
+
 	if (strength == 1 && ecc_stepsize == 512 && page_size == 2048) {
 		info->nfullchunks = 1;
 		info->ntotalchunks = 1;
@@ -1582,7 +1605,7 @@ static int pxa_ecc_init(struct pxa3xx_nand_info *info,
 		info->ecc_size = 32;
 		ecc->mode = NAND_ECC_HW;
 		ecc->size = info->chunk_size;
-		ecc->layout = &ecc_layout_2KB_bch4bit;
+		mtd_set_ooblayout(mtd, &pxa3xx_ooblayout_ops);
 		ecc->strength = 16;
 
 	} else if (strength == 4 && ecc_stepsize == 512 && page_size == 4096) {
@@ -1594,7 +1617,7 @@ static int pxa_ecc_init(struct pxa3xx_nand_info *info,
 		info->ecc_size = 32;
 		ecc->mode = NAND_ECC_HW;
 		ecc->size = info->chunk_size;
-		ecc->layout = &ecc_layout_4KB_bch4bit;
+		mtd_set_ooblayout(mtd, &pxa3xx_ooblayout_ops);
 		ecc->strength = 16;
 
 	/*
@@ -1612,7 +1635,7 @@ static int pxa_ecc_init(struct pxa3xx_nand_info *info,
 		info->ecc_size = 32;
 		ecc->mode = NAND_ECC_HW;
 		ecc->size = info->chunk_size;
-		ecc->layout = &ecc_layout_4KB_bch8bit;
+		mtd_set_ooblayout(mtd, &pxa3xx_ooblayout_ops);
 		ecc->strength = 16;
 	} else {
 		dev_err(&info->pdev->dev,
@@ -1651,6 +1674,12 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd)
 	if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370)
 		nand_writel(info, NDECCCTRL, 0x0);
 
+	if (pdata->flash_bbt)
+		chip->bbt_options |= NAND_BBT_USE_FLASH;
+
+	chip->ecc.strength = pdata->ecc_strength;
+	chip->ecc.size = pdata->ecc_step_size;
+
 	if (nand_scan_ident(mtd, 1, NULL))
 		return -ENODEV;
 
@@ -1663,13 +1692,12 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd)
 		}
 	}
 
-	if (pdata->flash_bbt) {
+	if (chip->bbt_options & NAND_BBT_USE_FLASH) {
 		/*
 		 * We'll use a bad block table stored in-flash and don't
 		 * allow writing the bad block marker to the flash.
 		 */
-		chip->bbt_options |= NAND_BBT_USE_FLASH |
-				     NAND_BBT_NO_OOB_BBM;
+		chip->bbt_options |= NAND_BBT_NO_OOB_BBM;
 		chip->bbt_td = &bbt_main_descr;
 		chip->bbt_md = &bbt_mirror_descr;
 	}
@@ -1689,10 +1717,9 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd)
 		}
 	}
 
-	if (pdata->ecc_strength && pdata->ecc_step_size) {
-		ecc_strength = pdata->ecc_strength;
-		ecc_step = pdata->ecc_step_size;
-	} else {
+	ecc_strength = chip->ecc.strength;
+	ecc_step = chip->ecc.size;
+	if (!ecc_strength || !ecc_step) {
 		ecc_strength = chip->ecc_strength_ds;
 		ecc_step = chip->ecc_step_ds;
 	}
@@ -1703,7 +1730,7 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd)
 		ecc_step = 512;
 	}
 
-	ret = pxa_ecc_init(info, &chip->ecc, ecc_strength,
+	ret = pxa_ecc_init(info, mtd, ecc_strength,
 			   ecc_step, mtd->writesize);
 	if (ret)
 		return ret;
@@ -1903,15 +1930,6 @@ static int pxa3xx_nand_probe_dt(struct platform_device *pdev)
 	if (of_get_property(np, "marvell,nand-keep-config", NULL))
 		pdata->keep_config = 1;
 	of_property_read_u32(np, "num-cs", &pdata->num_cs);
-	pdata->flash_bbt = of_get_nand_on_flash_bbt(np);
-
-	pdata->ecc_strength = of_get_nand_ecc_strength(np);
-	if (pdata->ecc_strength < 0)
-		pdata->ecc_strength = 0;
-
-	pdata->ecc_step_size = of_get_nand_ecc_step_size(np);
-	if (pdata->ecc_step_size < 0)
-		pdata->ecc_step_size = 0;
 
 	pdev->dev.platform_data = pdata;
 
diff --git a/drivers/mtd/nand/qcom_nandc.c b/drivers/mtd/nand/qcom_nandc.c
index f550a57..de7d28e 100644
--- a/drivers/mtd/nand/qcom_nandc.c
+++ b/drivers/mtd/nand/qcom_nandc.c
@@ -21,7 +21,6 @@
 #include <linux/mtd/partitions.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
-#include <linux/of_mtd.h>
 #include <linux/delay.h>
 
 /* NANDc reg offsets */
@@ -1437,7 +1436,6 @@ static int qcom_nandc_write_oob(struct mtd_info *mtd, struct nand_chip *chip,
 	struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
 	struct nand_ecc_ctrl *ecc = &chip->ecc;
 	u8 *oob = chip->oob_poi;
-	int free_boff;
 	int data_size, oob_size;
 	int ret, status = 0;
 
@@ -1451,12 +1449,11 @@ static int qcom_nandc_write_oob(struct mtd_info *mtd, struct nand_chip *chip,
 
 	/* calculate the data and oob size for the last codeword/step */
 	data_size = ecc->size - ((ecc->steps - 1) << 2);
-	oob_size = ecc->steps << 2;
-
-	free_boff = ecc->layout->oobfree[0].offset;
+	oob_size = mtd->oobavail;
 
 	/* override new oob content to last codeword */
-	memcpy(nandc->data_buffer + data_size, oob + free_boff, oob_size);
+	mtd_ooblayout_get_databytes(mtd, nandc->data_buffer + data_size, oob,
+				    0, mtd->oobavail);
 
 	set_address(host, host->cw_size * (ecc->steps - 1), page);
 	update_rw_regs(host, 1, false);
@@ -1710,61 +1707,52 @@ static void qcom_nandc_select_chip(struct mtd_info *mtd, int chipnr)
  * This layout is read as is when ECC is disabled. When ECC is enabled, the
  * inaccessible Bad Block byte(s) are ignored when we write to a page/oob,
  * and assumed as 0xffs when we read a page/oob. The ECC, unused and
- * dummy/real bad block bytes are grouped as ecc bytes in nand_ecclayout (i.e,
- * ecc->bytes is the sum of the three).
+ * dummy/real bad block bytes are grouped as ecc bytes (i.e, ecc->bytes is
+ * the sum of the three).
  */
-
-static struct nand_ecclayout *
-qcom_nand_create_layout(struct qcom_nand_host *host)
+static int qcom_nand_ooblayout_ecc(struct mtd_info *mtd, int section,
+				   struct mtd_oob_region *oobregion)
 {
-	struct nand_chip *chip = &host->chip;
-	struct mtd_info *mtd = nand_to_mtd(chip);
-	struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
+	struct nand_chip *chip = mtd_to_nand(mtd);
+	struct qcom_nand_host *host = to_qcom_nand_host(chip);
 	struct nand_ecc_ctrl *ecc = &chip->ecc;
-	struct nand_ecclayout *layout;
-	int i, j, steps, pos = 0, shift = 0;
 
-	layout = devm_kzalloc(nandc->dev, sizeof(*layout), GFP_KERNEL);
-	if (!layout)
-		return NULL;
-
-	steps = mtd->writesize / ecc->size;
-	layout->eccbytes = steps * ecc->bytes;
+	if (section > 1)
+		return -ERANGE;
 
-	layout->oobfree[0].offset = (steps - 1) * ecc->bytes + host->bbm_size;
-	layout->oobfree[0].length = steps << 2;
-
-	/*
-	 * the oob bytes in the first n - 1 codewords are all grouped together
-	 * in the format:
-	 * DUMMY_BBM + UNUSED + ECC
-	 */
-	for (i = 0; i < steps - 1; i++) {
-		for (j = 0; j < ecc->bytes; j++)
-			layout->eccpos[pos++] = i * ecc->bytes + j;
+	if (!section) {
+		oobregion->length = (ecc->bytes * (ecc->steps - 1)) +
+				    host->bbm_size;
+		oobregion->offset = 0;
+	} else {
+		oobregion->length = host->ecc_bytes_hw + host->spare_bytes;
+		oobregion->offset = mtd->oobsize - oobregion->length;
 	}
 
-	/*
-	 * the oob bytes in the last codeword are grouped in the format:
-	 * BBM + FREE OOB + UNUSED + ECC
-	 */
+	return 0;
+}
 
-	/* fill up the bbm positions */
-	for (j = 0; j < host->bbm_size; j++)
-		layout->eccpos[pos++] = i * ecc->bytes + j;
+static int qcom_nand_ooblayout_free(struct mtd_info *mtd, int section,
+				     struct mtd_oob_region *oobregion)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
+	struct qcom_nand_host *host = to_qcom_nand_host(chip);
+	struct nand_ecc_ctrl *ecc = &chip->ecc;
 
-	/*
-	 * fill up the ecc and reserved positions, their indices are offseted
-	 * by the free oob region
-	 */
-	shift = layout->oobfree[0].length + host->bbm_size;
+	if (section)
+		return -ERANGE;
 
-	for (j = 0; j < (host->ecc_bytes_hw + host->spare_bytes); j++)
-		layout->eccpos[pos++] = i * ecc->bytes + shift + j;
+	oobregion->length = ecc->steps * 4;
+	oobregion->offset = ((ecc->steps - 1) * ecc->bytes) + host->bbm_size;
 
-	return layout;
+	return 0;
 }
 
+static const struct mtd_ooblayout_ops qcom_nand_ooblayout_ops = {
+	.ecc = qcom_nand_ooblayout_ecc,
+	.free = qcom_nand_ooblayout_free,
+};
+
 static int qcom_nand_host_setup(struct qcom_nand_host *host)
 {
 	struct nand_chip *chip = &host->chip;
@@ -1851,9 +1839,7 @@ static int qcom_nand_host_setup(struct qcom_nand_host *host)
 
 	ecc->mode = NAND_ECC_HW;
 
-	ecc->layout = qcom_nand_create_layout(host);
-	if (!ecc->layout)
-		return -ENOMEM;
+	mtd_set_ooblayout(mtd, &qcom_nand_ooblayout_ops);
 
 	cwperpage = mtd->writesize / ecc->size;
 
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index 9c9397b..d9309cf 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -84,11 +84,33 @@
 
 /* new oob placement block for use with hardware ecc generation
  */
+static int s3c2410_ooblayout_ecc(struct mtd_info *mtd, int section,
+				 struct mtd_oob_region *oobregion)
+{
+	if (section)
+		return -ERANGE;
+
+	oobregion->offset = 0;
+	oobregion->length = 3;
+
+	return 0;
+}
+
+static int s3c2410_ooblayout_free(struct mtd_info *mtd, int section,
+				  struct mtd_oob_region *oobregion)
+{
+	if (section)
+		return -ERANGE;
+
+	oobregion->offset = 8;
+	oobregion->length = 8;
+
+	return 0;
+}
 
-static struct nand_ecclayout nand_hw_eccoob = {
-	.eccbytes = 3,
-	.eccpos = {0, 1, 2},
-	.oobfree = {{8, 8}}
+static const struct mtd_ooblayout_ops s3c2410_ooblayout_ops = {
+	.ecc = s3c2410_ooblayout_ecc,
+	.free = s3c2410_ooblayout_free,
 };
 
 /* controller and mtd information */
@@ -542,7 +564,8 @@ static int s3c2410_nand_correct_data(struct mtd_info *mtd, u_char *dat,
 	diff0 |= (diff1 << 8);
 	diff0 |= (diff2 << 16);
 
-	if ((diff0 & ~(1<<fls(diff0))) == 0)
+	/* equal to "(diff0 & ~(1 << __ffs(diff0)))" */
+	if ((diff0 & (diff0 - 1)) == 0)
 		return 1;
 
 	return -1;
@@ -859,6 +882,7 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
 	}
 #else
 	chip->ecc.mode	    = NAND_ECC_SOFT;
+	chip->ecc.algo	= NAND_ECC_HAMMING;
 #endif
 
 	if (set->disable_ecc)
@@ -919,7 +943,7 @@ static void s3c2410_nand_update_chip(struct s3c2410_nand_info *info,
 	} else {
 		chip->ecc.size	    = 512;
 		chip->ecc.bytes	    = 3;
-		chip->ecc.layout    = &nand_hw_eccoob;
+		mtd_set_ooblayout(nand_to_mtd(chip), &s3c2410_ooblayout_ops);
 	}
 }
 
diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c
index 4814402..6fa3bcd 100644
--- a/drivers/mtd/nand/sh_flctl.c
+++ b/drivers/mtd/nand/sh_flctl.c
@@ -31,7 +31,6 @@
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
-#include <linux/of_mtd.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/sh_dma.h>
@@ -43,26 +42,73 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/sh_flctl.h>
 
-static struct nand_ecclayout flctl_4secc_oob_16 = {
-	.eccbytes = 10,
-	.eccpos = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9},
-	.oobfree = {
-		{.offset = 12,
-		. length = 4} },
+static int flctl_4secc_ooblayout_sp_ecc(struct mtd_info *mtd, int section,
+					struct mtd_oob_region *oobregion)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
+
+	if (section)
+		return -ERANGE;
+
+	oobregion->offset = 0;
+	oobregion->length = chip->ecc.bytes;
+
+	return 0;
+}
+
+static int flctl_4secc_ooblayout_sp_free(struct mtd_info *mtd, int section,
+					 struct mtd_oob_region *oobregion)
+{
+	if (section)
+		return -ERANGE;
+
+	oobregion->offset = 12;
+	oobregion->length = 4;
+
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops flctl_4secc_oob_smallpage_ops = {
+	.ecc = flctl_4secc_ooblayout_sp_ecc,
+	.free = flctl_4secc_ooblayout_sp_free,
 };
 
-static struct nand_ecclayout flctl_4secc_oob_64 = {
-	.eccbytes = 4 * 10,
-	.eccpos = {
-		 6,  7,  8,  9, 10, 11, 12, 13, 14, 15,
-		22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
-		38, 39, 40, 41, 42, 43, 44, 45, 46, 47,
-		54, 55, 56, 57, 58, 59, 60, 61, 62, 63 },
-	.oobfree = {
-		{.offset =  2, .length = 4},
-		{.offset = 16, .length = 6},
-		{.offset = 32, .length = 6},
-		{.offset = 48, .length = 6} },
+static int flctl_4secc_ooblayout_lp_ecc(struct mtd_info *mtd, int section,
+					struct mtd_oob_region *oobregion)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
+
+	if (section >= chip->ecc.steps)
+		return -ERANGE;
+
+	oobregion->offset = (section * 16) + 6;
+	oobregion->length = chip->ecc.bytes;
+
+	return 0;
+}
+
+static int flctl_4secc_ooblayout_lp_free(struct mtd_info *mtd, int section,
+					 struct mtd_oob_region *oobregion)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
+
+	if (section >= chip->ecc.steps)
+		return -ERANGE;
+
+	oobregion->offset = section * 16;
+	oobregion->length = 6;
+
+	if (!section) {
+		oobregion->offset += 2;
+		oobregion->length -= 2;
+	}
+
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops flctl_4secc_oob_largepage_ops = {
+	.ecc = flctl_4secc_ooblayout_lp_ecc,
+	.free = flctl_4secc_ooblayout_lp_free,
 };
 
 static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
@@ -987,10 +1033,10 @@ static int flctl_chip_init_tail(struct mtd_info *mtd)
 
 	if (flctl->hwecc) {
 		if (mtd->writesize == 512) {
-			chip->ecc.layout = &flctl_4secc_oob_16;
+			mtd_set_ooblayout(mtd, &flctl_4secc_oob_smallpage_ops);
 			chip->badblock_pattern = &flctl_4secc_smallpage;
 		} else {
-			chip->ecc.layout = &flctl_4secc_oob_64;
+			mtd_set_ooblayout(mtd, &flctl_4secc_oob_largepage_ops);
 			chip->badblock_pattern = &flctl_4secc_largepage;
 		}
 
@@ -1005,6 +1051,7 @@ static int flctl_chip_init_tail(struct mtd_info *mtd)
 		flctl->flcmncr_base |= _4ECCEN;
 	} else {
 		chip->ecc.mode = NAND_ECC_SOFT;
+		chip->ecc.algo = NAND_ECC_HAMMING;
 	}
 
 	return 0;
@@ -1044,8 +1091,6 @@ static struct sh_flctl_platform_data *flctl_parse_dt(struct device *dev)
 	const struct of_device_id *match;
 	struct flctl_soc_config *config;
 	struct sh_flctl_platform_data *pdata;
-	struct device_node *dn = dev->of_node;
-	int ret;
 
 	match = of_match_device(of_flctl_match, dev);
 	if (match)
@@ -1065,15 +1110,6 @@ static struct sh_flctl_platform_data *flctl_parse_dt(struct device *dev)
 	pdata->has_hwecc = config->has_hwecc;
 	pdata->use_holden = config->use_holden;
 
-	/* parse user defined options */
-	ret = of_get_nand_bus_width(dn);
-	if (ret == 16)
-		pdata->flcmncr_val |= SEL_16BIT;
-	else if (ret != 8) {
-		dev_err(dev, "%s: invalid bus width\n", __func__);
-		return NULL;
-	}
-
 	return pdata;
 }
 
@@ -1136,15 +1172,14 @@ static int flctl_probe(struct platform_device *pdev)
 	nand->chip_delay = 20;
 
 	nand->read_byte = flctl_read_byte;
+	nand->read_word = flctl_read_word;
 	nand->write_buf = flctl_write_buf;
 	nand->read_buf = flctl_read_buf;
 	nand->select_chip = flctl_select_chip;
 	nand->cmdfunc = flctl_cmdfunc;
 
-	if (pdata->flcmncr_val & SEL_16BIT) {
+	if (pdata->flcmncr_val & SEL_16BIT)
 		nand->options |= NAND_BUSWIDTH_16;
-		nand->read_word = flctl_read_word;
-	}
 
 	pm_runtime_enable(&pdev->dev);
 	pm_runtime_resume(&pdev->dev);
@@ -1155,6 +1190,16 @@ static int flctl_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_chip;
 
+	if (nand->options & NAND_BUSWIDTH_16) {
+		/*
+		 * NAND_BUSWIDTH_16 may have been set by nand_scan_ident().
+		 * Add the SEL_16BIT flag in pdata->flcmncr_val and re-assign
+		 * flctl->flcmncr_base to pdata->flcmncr_val.
+		 */
+		pdata->flcmncr_val |= SEL_16BIT;
+		flctl->flcmncr_base = pdata->flcmncr_val;
+	}
+
 	ret = flctl_chip_init_tail(flctl_mtd);
 	if (ret)
 		goto err_chip;
diff --git a/drivers/mtd/nand/sharpsl.c b/drivers/mtd/nand/sharpsl.c
index b7d1b55..064ca17 100644
--- a/drivers/mtd/nand/sharpsl.c
+++ b/drivers/mtd/nand/sharpsl.c
@@ -148,6 +148,7 @@ static int sharpsl_nand_probe(struct platform_device *pdev)
 	/* Link the private data with the MTD structure */
 	mtd = nand_to_mtd(this);
 	mtd->dev.parent = &pdev->dev;
+	mtd_set_ooblayout(mtd, data->ecc_layout);
 
 	platform_set_drvdata(pdev, sharpsl);
 
@@ -170,7 +171,6 @@ static int sharpsl_nand_probe(struct platform_device *pdev)
 	this->ecc.bytes = 3;
 	this->ecc.strength = 1;
 	this->badblock_pattern = data->badblock_pattern;
-	this->ecc.layout = data->ecc_layout;
 	this->ecc.hwctl = sharpsl_nand_enable_hwecc;
 	this->ecc.calculate = sharpsl_nand_calculate_ecc;
 	this->ecc.correct = nand_correct_data;
diff --git a/drivers/mtd/nand/sm_common.c b/drivers/mtd/nand/sm_common.c
index c514740..5939dff 100644
--- a/drivers/mtd/nand/sm_common.c
+++ b/drivers/mtd/nand/sm_common.c
@@ -12,14 +12,47 @@
 #include <linux/sizes.h>
 #include "sm_common.h"
 
-static struct nand_ecclayout nand_oob_sm = {
-	.eccbytes = 6,
-	.eccpos = {8, 9, 10, 13, 14, 15},
-	.oobfree = {
-		{.offset = 0 , .length = 4}, /* reserved */
-		{.offset = 6 , .length = 2}, /* LBA1 */
-		{.offset = 11, .length = 2}  /* LBA2 */
+static int oob_sm_ooblayout_ecc(struct mtd_info *mtd, int section,
+				struct mtd_oob_region *oobregion)
+{
+	if (section > 1)
+		return -ERANGE;
+
+	oobregion->length = 3;
+	oobregion->offset = ((section + 1) * 8) - 3;
+
+	return 0;
+}
+
+static int oob_sm_ooblayout_free(struct mtd_info *mtd, int section,
+				 struct mtd_oob_region *oobregion)
+{
+	switch (section) {
+	case 0:
+		/* reserved */
+		oobregion->offset = 0;
+		oobregion->length = 4;
+		break;
+	case 1:
+		/* LBA1 */
+		oobregion->offset = 6;
+		oobregion->length = 2;
+		break;
+	case 2:
+		/* LBA2 */
+		oobregion->offset = 11;
+		oobregion->length = 2;
+		break;
+	default:
+		return -ERANGE;
 	}
+
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops oob_sm_ops = {
+	.ecc = oob_sm_ooblayout_ecc,
+	.free = oob_sm_ooblayout_free,
 };
 
 /* NOTE: This layout is is not compatabable with SmartMedia, */
@@ -28,15 +61,43 @@ static struct nand_ecclayout nand_oob_sm = {
 /* If you use smftl, it will bypass this and work correctly */
 /* If you not, then you break SmartMedia compliance anyway */
 
-static struct nand_ecclayout nand_oob_sm_small = {
-	.eccbytes = 3,
-	.eccpos = {0, 1, 2},
-	.oobfree = {
-		{.offset = 3 , .length = 2}, /* reserved */
-		{.offset = 6 , .length = 2}, /* LBA1 */
+static int oob_sm_small_ooblayout_ecc(struct mtd_info *mtd, int section,
+				      struct mtd_oob_region *oobregion)
+{
+	if (section)
+		return -ERANGE;
+
+	oobregion->length = 3;
+	oobregion->offset = 0;
+
+	return 0;
+}
+
+static int oob_sm_small_ooblayout_free(struct mtd_info *mtd, int section,
+				       struct mtd_oob_region *oobregion)
+{
+	switch (section) {
+	case 0:
+		/* reserved */
+		oobregion->offset = 3;
+		oobregion->length = 2;
+		break;
+	case 1:
+		/* LBA1 */
+		oobregion->offset = 6;
+		oobregion->length = 2;
+		break;
+	default:
+		return -ERANGE;
 	}
-};
 
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops oob_sm_small_ops = {
+	.ecc = oob_sm_small_ooblayout_ecc,
+	.free = oob_sm_small_ooblayout_free,
+};
 
 static int sm_block_markbad(struct mtd_info *mtd, loff_t ofs)
 {
@@ -121,9 +182,9 @@ int sm_register_device(struct mtd_info *mtd, int smartmedia)
 
 	/* ECC layout */
 	if (mtd->writesize == SM_SECTOR_SIZE)
-		chip->ecc.layout = &nand_oob_sm;
+		mtd_set_ooblayout(mtd, &oob_sm_ops);
 	else if (mtd->writesize == SM_SMALL_PAGE)
-		chip->ecc.layout = &nand_oob_sm_small;
+		mtd_set_ooblayout(mtd, &oob_sm_small_ops);
 	else
 		return -ENODEV;
 
diff --git a/drivers/mtd/nand/socrates_nand.c b/drivers/mtd/nand/socrates_nand.c
index e3305f9..888fd31 100644
--- a/drivers/mtd/nand/socrates_nand.c
+++ b/drivers/mtd/nand/socrates_nand.c
@@ -180,6 +180,7 @@ static int socrates_nand_probe(struct platform_device *ofdev)
 	nand_chip->dev_ready = socrates_nand_device_ready;
 
 	nand_chip->ecc.mode = NAND_ECC_SOFT;	/* enable ECC */
+	nand_chip->ecc.algo = NAND_ECC_HAMMING;
 
 	/* TODO: I have no idea what real delay is. */
 	nand_chip->chip_delay = 20;		/* 20us command delay time */
diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c
index 1c03eee..a83a690 100644
--- a/drivers/mtd/nand/sunxi_nand.c
+++ b/drivers/mtd/nand/sunxi_nand.c
@@ -30,7 +30,6 @@
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/of_gpio.h>
-#include <linux/of_mtd.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
@@ -39,7 +38,7 @@
 #include <linux/dmaengine.h>
 #include <linux/gpio.h>
 #include <linux/interrupt.h>
-#include <linux/io.h>
+#include <linux/iopoll.h>
 
 #define NFC_REG_CTL		0x0000
 #define NFC_REG_ST		0x0004
@@ -155,7 +154,7 @@
 /* define bit use in NFC_ECC_ST */
 #define NFC_ECC_ERR(x)		BIT(x)
 #define NFC_ECC_PAT_FOUND(x)	BIT(x + 16)
-#define NFC_ECC_ERR_CNT(b, x)	(((x) >> ((b) * 8)) & 0xff)
+#define NFC_ECC_ERR_CNT(b, x)	(((x) >> (((b) % 4) * 8)) & 0xff)
 
 #define NFC_DEFAULT_TIMEOUT_MS	1000
 
@@ -212,12 +211,9 @@ struct sunxi_nand_chip_sel {
  * sunxi HW ECC infos: stores information related to HW ECC support
  *
  * @mode:	the sunxi ECC mode field deduced from ECC requirements
- * @layout:	the OOB layout depending on the ECC requirements and the
- *		selected ECC mode
  */
 struct sunxi_nand_hw_ecc {
 	int mode;
-	struct nand_ecclayout layout;
 };
 
 /*
@@ -239,6 +235,10 @@ struct sunxi_nand_chip {
 	u32 timing_cfg;
 	u32 timing_ctl;
 	int selected;
+	int addr_cycles;
+	u32 addr[2];
+	int cmd_cycles;
+	u8 cmd[2];
 	int nsels;
 	struct sunxi_nand_chip_sel sels[0];
 };
@@ -298,54 +298,71 @@ static irqreturn_t sunxi_nfc_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static int sunxi_nfc_wait_int(struct sunxi_nfc *nfc, u32 flags,
-			      unsigned int timeout_ms)
+static int sunxi_nfc_wait_events(struct sunxi_nfc *nfc, u32 events,
+				 bool use_polling, unsigned int timeout_ms)
 {
-	init_completion(&nfc->complete);
+	int ret;
 
-	writel(flags, nfc->regs + NFC_REG_INT);
+	if (events & ~NFC_INT_MASK)
+		return -EINVAL;
 
 	if (!timeout_ms)
 		timeout_ms = NFC_DEFAULT_TIMEOUT_MS;
 
-	if (!wait_for_completion_timeout(&nfc->complete,
-					 msecs_to_jiffies(timeout_ms))) {
-		dev_err(nfc->dev, "wait interrupt timedout\n");
-		return -ETIMEDOUT;
+	if (!use_polling) {
+		init_completion(&nfc->complete);
+
+		writel(events, nfc->regs + NFC_REG_INT);
+
+		ret = wait_for_completion_timeout(&nfc->complete,
+						msecs_to_jiffies(timeout_ms));
+
+		writel(0, nfc->regs + NFC_REG_INT);
+	} else {
+		u32 status;
+
+		ret = readl_poll_timeout(nfc->regs + NFC_REG_ST, status,
+					 (status & events) == events, 1,
+					 timeout_ms * 1000);
 	}
 
-	return 0;
+	writel(events & NFC_INT_MASK, nfc->regs + NFC_REG_ST);
+
+	if (ret)
+		dev_err(nfc->dev, "wait interrupt timedout\n");
+
+	return ret;
 }
 
 static int sunxi_nfc_wait_cmd_fifo_empty(struct sunxi_nfc *nfc)
 {
-	unsigned long timeout = jiffies +
-				msecs_to_jiffies(NFC_DEFAULT_TIMEOUT_MS);
+	u32 status;
+	int ret;
 
-	do {
-		if (!(readl(nfc->regs + NFC_REG_ST) & NFC_CMD_FIFO_STATUS))
-			return 0;
-	} while (time_before(jiffies, timeout));
+	ret = readl_poll_timeout(nfc->regs + NFC_REG_ST, status,
+				 !(status & NFC_CMD_FIFO_STATUS), 1,
+				 NFC_DEFAULT_TIMEOUT_MS * 1000);
+	if (ret)
+		dev_err(nfc->dev, "wait for empty cmd FIFO timedout\n");
 
-	dev_err(nfc->dev, "wait for empty cmd FIFO timedout\n");
-	return -ETIMEDOUT;
+	return ret;
 }
 
 static int sunxi_nfc_rst(struct sunxi_nfc *nfc)
 {
-	unsigned long timeout = jiffies +
-				msecs_to_jiffies(NFC_DEFAULT_TIMEOUT_MS);
+	u32 ctl;
+	int ret;
 
 	writel(0, nfc->regs + NFC_REG_ECC_CTL);
 	writel(NFC_RESET, nfc->regs + NFC_REG_CTL);
 
-	do {
-		if (!(readl(nfc->regs + NFC_REG_CTL) & NFC_RESET))
-			return 0;
-	} while (time_before(jiffies, timeout));
+	ret = readl_poll_timeout(nfc->regs + NFC_REG_CTL, ctl,
+				 !(ctl & NFC_RESET), 1,
+				 NFC_DEFAULT_TIMEOUT_MS * 1000);
+	if (ret)
+		dev_err(nfc->dev, "wait for NAND controller reset timedout\n");
 
-	dev_err(nfc->dev, "wait for NAND controller reset timedout\n");
-	return -ETIMEDOUT;
+	return ret;
 }
 
 static int sunxi_nfc_dev_ready(struct mtd_info *mtd)
@@ -354,7 +371,6 @@ static int sunxi_nfc_dev_ready(struct mtd_info *mtd)
 	struct sunxi_nand_chip *sunxi_nand = to_sunxi_nand(nand);
 	struct sunxi_nfc *nfc = to_sunxi_nfc(sunxi_nand->nand.controller);
 	struct sunxi_nand_rb *rb;
-	unsigned long timeo = (sunxi_nand->nand.state == FL_ERASING ? 400 : 20);
 	int ret;
 
 	if (sunxi_nand->selected < 0)
@@ -366,12 +382,6 @@ static int sunxi_nfc_dev_ready(struct mtd_info *mtd)
 	case RB_NATIVE:
 		ret = !!(readl(nfc->regs + NFC_REG_ST) &
 			 NFC_RB_STATE(rb->info.nativeid));
-		if (ret)
-			break;
-
-		sunxi_nfc_wait_int(nfc, NFC_RB_B2R, timeo);
-		ret = !!(readl(nfc->regs + NFC_REG_ST) &
-			 NFC_RB_STATE(rb->info.nativeid));
 		break;
 	case RB_GPIO:
 		ret = gpio_get_value(rb->info.gpio);
@@ -407,7 +417,7 @@ static void sunxi_nfc_select_chip(struct mtd_info *mtd, int chip)
 		sel = &sunxi_nand->sels[chip];
 
 		ctl |= NFC_CE_SEL(sel->cs) | NFC_EN |
-		       NFC_PAGE_SHIFT(nand->page_shift - 10);
+		       NFC_PAGE_SHIFT(nand->page_shift);
 		if (sel->rb.type == RB_NONE) {
 			nand->dev_ready = NULL;
 		} else {
@@ -452,7 +462,7 @@ static void sunxi_nfc_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
 		tmp = NFC_DATA_TRANS | NFC_DATA_SWAP_METHOD;
 		writel(tmp, nfc->regs + NFC_REG_CMD);
 
-		ret = sunxi_nfc_wait_int(nfc, NFC_CMD_INT_FLAG, 0);
+		ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, true, 0);
 		if (ret)
 			break;
 
@@ -487,7 +497,7 @@ static void sunxi_nfc_write_buf(struct mtd_info *mtd, const uint8_t *buf,
 		      NFC_ACCESS_DIR;
 		writel(tmp, nfc->regs + NFC_REG_CMD);
 
-		ret = sunxi_nfc_wait_int(nfc, NFC_CMD_INT_FLAG, 0);
+		ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, true, 0);
 		if (ret)
 			break;
 
@@ -511,32 +521,54 @@ static void sunxi_nfc_cmd_ctrl(struct mtd_info *mtd, int dat,
 	struct sunxi_nand_chip *sunxi_nand = to_sunxi_nand(nand);
 	struct sunxi_nfc *nfc = to_sunxi_nfc(sunxi_nand->nand.controller);
 	int ret;
-	u32 tmp;
 
 	ret = sunxi_nfc_wait_cmd_fifo_empty(nfc);
 	if (ret)
 		return;
 
-	if (ctrl & NAND_CTRL_CHANGE) {
-		tmp = readl(nfc->regs + NFC_REG_CTL);
-		if (ctrl & NAND_NCE)
-			tmp |= NFC_CE_CTL;
-		else
-			tmp &= ~NFC_CE_CTL;
-		writel(tmp, nfc->regs + NFC_REG_CTL);
-	}
+	if (dat == NAND_CMD_NONE && (ctrl & NAND_NCE) &&
+	    !(ctrl & (NAND_CLE | NAND_ALE))) {
+		u32 cmd = 0;
 
-	if (dat == NAND_CMD_NONE)
-		return;
+		if (!sunxi_nand->addr_cycles && !sunxi_nand->cmd_cycles)
+			return;
 
-	if (ctrl & NAND_CLE) {
-		writel(NFC_SEND_CMD1 | dat, nfc->regs + NFC_REG_CMD);
-	} else {
-		writel(dat, nfc->regs + NFC_REG_ADDR_LOW);
-		writel(NFC_SEND_ADR, nfc->regs + NFC_REG_CMD);
+		if (sunxi_nand->cmd_cycles--)
+			cmd |= NFC_SEND_CMD1 | sunxi_nand->cmd[0];
+
+		if (sunxi_nand->cmd_cycles--) {
+			cmd |= NFC_SEND_CMD2;
+			writel(sunxi_nand->cmd[1],
+			       nfc->regs + NFC_REG_RCMD_SET);
+		}
+
+		sunxi_nand->cmd_cycles = 0;
+
+		if (sunxi_nand->addr_cycles) {
+			cmd |= NFC_SEND_ADR |
+			       NFC_ADR_NUM(sunxi_nand->addr_cycles);
+			writel(sunxi_nand->addr[0],
+			       nfc->regs + NFC_REG_ADDR_LOW);
+		}
+
+		if (sunxi_nand->addr_cycles > 4)
+			writel(sunxi_nand->addr[1],
+			       nfc->regs + NFC_REG_ADDR_HIGH);
+
+		writel(cmd, nfc->regs + NFC_REG_CMD);
+		sunxi_nand->addr[0] = 0;
+		sunxi_nand->addr[1] = 0;
+		sunxi_nand->addr_cycles = 0;
+		sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, true, 0);
 	}
 
-	sunxi_nfc_wait_int(nfc, NFC_CMD_INT_FLAG, 0);
+	if (ctrl & NAND_CLE) {
+		sunxi_nand->cmd[sunxi_nand->cmd_cycles++] = dat;
+	} else if (ctrl & NAND_ALE) {
+		sunxi_nand->addr[sunxi_nand->addr_cycles / 4] |=
+				dat << ((sunxi_nand->addr_cycles % 4) * 8);
+		sunxi_nand->addr_cycles++;
+	}
 }
 
 /* These seed values have been extracted from Allwinner's BSP */
@@ -717,7 +749,8 @@ static void sunxi_nfc_hw_ecc_enable(struct mtd_info *mtd)
 	ecc_ctl = readl(nfc->regs + NFC_REG_ECC_CTL);
 	ecc_ctl &= ~(NFC_ECC_MODE_MSK | NFC_ECC_PIPELINE |
 		     NFC_ECC_BLOCK_SIZE_MSK);
-	ecc_ctl |= NFC_ECC_EN | NFC_ECC_MODE(data->mode) | NFC_ECC_EXCEPTION;
+	ecc_ctl |= NFC_ECC_EN | NFC_ECC_MODE(data->mode) | NFC_ECC_EXCEPTION |
+		   NFC_ECC_PIPELINE;
 
 	writel(ecc_ctl, nfc->regs + NFC_REG_ECC_CTL);
 }
@@ -739,18 +772,106 @@ static inline void sunxi_nfc_user_data_to_buf(u32 user_data, u8 *buf)
 	buf[3] = user_data >> 24;
 }
 
+static inline u32 sunxi_nfc_buf_to_user_data(const u8 *buf)
+{
+	return buf[0] | (buf[1] << 8) | (buf[2] << 16) | (buf[3] << 24);
+}
+
+static void sunxi_nfc_hw_ecc_get_prot_oob_bytes(struct mtd_info *mtd, u8 *oob,
+						int step, bool bbm, int page)
+{
+	struct nand_chip *nand = mtd_to_nand(mtd);
+	struct sunxi_nfc *nfc = to_sunxi_nfc(nand->controller);
+
+	sunxi_nfc_user_data_to_buf(readl(nfc->regs + NFC_REG_USER_DATA(step)),
+				   oob);
+
+	/* De-randomize the Bad Block Marker. */
+	if (bbm && (nand->options & NAND_NEED_SCRAMBLING))
+		sunxi_nfc_randomize_bbm(mtd, page, oob);
+}
+
+static void sunxi_nfc_hw_ecc_set_prot_oob_bytes(struct mtd_info *mtd,
+						const u8 *oob, int step,
+						bool bbm, int page)
+{
+	struct nand_chip *nand = mtd_to_nand(mtd);
+	struct sunxi_nfc *nfc = to_sunxi_nfc(nand->controller);
+	u8 user_data[4];
+
+	/* Randomize the Bad Block Marker. */
+	if (bbm && (nand->options & NAND_NEED_SCRAMBLING)) {
+		memcpy(user_data, oob, sizeof(user_data));
+		sunxi_nfc_randomize_bbm(mtd, page, user_data);
+		oob = user_data;
+	}
+
+	writel(sunxi_nfc_buf_to_user_data(oob),
+	       nfc->regs + NFC_REG_USER_DATA(step));
+}
+
+static void sunxi_nfc_hw_ecc_update_stats(struct mtd_info *mtd,
+					  unsigned int *max_bitflips, int ret)
+{
+	if (ret < 0) {
+		mtd->ecc_stats.failed++;
+	} else {
+		mtd->ecc_stats.corrected += ret;
+		*max_bitflips = max_t(unsigned int, *max_bitflips, ret);
+	}
+}
+
+static int sunxi_nfc_hw_ecc_correct(struct mtd_info *mtd, u8 *data, u8 *oob,
+				    int step, bool *erased)
+{
+	struct nand_chip *nand = mtd_to_nand(mtd);
+	struct sunxi_nfc *nfc = to_sunxi_nfc(nand->controller);
+	struct nand_ecc_ctrl *ecc = &nand->ecc;
+	u32 status, tmp;
+
+	*erased = false;
+
+	status = readl(nfc->regs + NFC_REG_ECC_ST);
+
+	if (status & NFC_ECC_ERR(step))
+		return -EBADMSG;
+
+	if (status & NFC_ECC_PAT_FOUND(step)) {
+		u8 pattern;
+
+		if (unlikely(!(readl(nfc->regs + NFC_REG_PAT_ID) & 0x1))) {
+			pattern = 0x0;
+		} else {
+			pattern = 0xff;
+			*erased = true;
+		}
+
+		if (data)
+			memset(data, pattern, ecc->size);
+
+		if (oob)
+			memset(oob, pattern, ecc->bytes + 4);
+
+		return 0;
+	}
+
+	tmp = readl(nfc->regs + NFC_REG_ECC_ERR_CNT(step));
+
+	return NFC_ECC_ERR_CNT(step, tmp);
+}
+
 static int sunxi_nfc_hw_ecc_read_chunk(struct mtd_info *mtd,
 				       u8 *data, int data_off,
 				       u8 *oob, int oob_off,
 				       int *cur_off,
 				       unsigned int *max_bitflips,
-				       bool bbm, int page)
+				       bool bbm, bool oob_required, int page)
 {
 	struct nand_chip *nand = mtd_to_nand(mtd);
 	struct sunxi_nfc *nfc = to_sunxi_nfc(nand->controller);
 	struct nand_ecc_ctrl *ecc = &nand->ecc;
 	int raw_mode = 0;
-	u32 status;
+	bool erased;
 	int ret;
 
 	if (*cur_off != data_off)
@@ -769,34 +890,19 @@ static int sunxi_nfc_hw_ecc_read_chunk(struct mtd_info *mtd,
 	writel(NFC_DATA_TRANS | NFC_DATA_SWAP_METHOD | NFC_ECC_OP,
 	       nfc->regs + NFC_REG_CMD);
 
-	ret = sunxi_nfc_wait_int(nfc, NFC_CMD_INT_FLAG, 0);
+	ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, true, 0);
 	sunxi_nfc_randomizer_disable(mtd);
 	if (ret)
 		return ret;
 
 	*cur_off = oob_off + ecc->bytes + 4;
 
-	status = readl(nfc->regs + NFC_REG_ECC_ST);
-	if (status & NFC_ECC_PAT_FOUND(0)) {
-		u8 pattern = 0xff;
-
-		if (unlikely(!(readl(nfc->regs + NFC_REG_PAT_ID) & 0x1)))
-			pattern = 0x0;
-
-		memset(data, pattern, ecc->size);
-		memset(oob, pattern, ecc->bytes + 4);
-
+	ret = sunxi_nfc_hw_ecc_correct(mtd, data, oob_required ? oob : NULL, 0,
+				       &erased);
+	if (erased)
 		return 1;
-	}
-
-	ret = NFC_ECC_ERR_CNT(0, readl(nfc->regs + NFC_REG_ECC_ERR_CNT(0)));
-
-	memcpy_fromio(data, nfc->regs + NFC_RAM0_BASE, ecc->size);
-
-	nand->cmdfunc(mtd, NAND_CMD_RNDOUT, oob_off, -1);
-	sunxi_nfc_randomizer_read_buf(mtd, oob, ecc->bytes + 4, true, page);
 
-	if (status & NFC_ECC_ERR(0)) {
+	if (ret < 0) {
 		/*
 		 * Re-read the data with the randomizer disabled to identify
 		 * bitflips in erased pages.
@@ -804,35 +910,34 @@ static int sunxi_nfc_hw_ecc_read_chunk(struct mtd_info *mtd,
 		if (nand->options & NAND_NEED_SCRAMBLING) {
 			nand->cmdfunc(mtd, NAND_CMD_RNDOUT, data_off, -1);
 			nand->read_buf(mtd, data, ecc->size);
-			nand->cmdfunc(mtd, NAND_CMD_RNDOUT, oob_off, -1);
-			nand->read_buf(mtd, oob, ecc->bytes + 4);
+		} else {
+			memcpy_fromio(data, nfc->regs + NFC_RAM0_BASE,
+				      ecc->size);
 		}
 
+		nand->cmdfunc(mtd, NAND_CMD_RNDOUT, oob_off, -1);
+		nand->read_buf(mtd, oob, ecc->bytes + 4);
+
 		ret = nand_check_erased_ecc_chunk(data,	ecc->size,
 						  oob, ecc->bytes + 4,
 						  NULL, 0, ecc->strength);
 		if (ret >= 0)
 			raw_mode = 1;
 	} else {
-		/*
-		 * The engine protects 4 bytes of OOB data per chunk.
-		 * Retrieve the corrected OOB bytes.
-		 */
-		sunxi_nfc_user_data_to_buf(readl(nfc->regs + NFC_REG_USER_DATA(0)),
-					   oob);
+		memcpy_fromio(data, nfc->regs + NFC_RAM0_BASE, ecc->size);
 
-		/* De-randomize the Bad Block Marker. */
-		if (bbm && nand->options & NAND_NEED_SCRAMBLING)
-			sunxi_nfc_randomize_bbm(mtd, page, oob);
-	}
+		if (oob_required) {
+			nand->cmdfunc(mtd, NAND_CMD_RNDOUT, oob_off, -1);
+			sunxi_nfc_randomizer_read_buf(mtd, oob, ecc->bytes + 4,
+						      true, page);
 
-	if (ret < 0) {
-		mtd->ecc_stats.failed++;
-	} else {
-		mtd->ecc_stats.corrected += ret;
-		*max_bitflips = max_t(unsigned int, *max_bitflips, ret);
+			sunxi_nfc_hw_ecc_get_prot_oob_bytes(mtd, oob, 0,
+							    bbm, page);
+		}
 	}
 
+	sunxi_nfc_hw_ecc_update_stats(mtd, max_bitflips, ret);
+
 	return raw_mode;
 }
 
@@ -848,7 +953,7 @@ static void sunxi_nfc_hw_ecc_read_extra_oob(struct mtd_info *mtd,
 	if (len <= 0)
 		return;
 
-	if (*cur_off != offset)
+	if (!cur_off || *cur_off != offset)
 		nand->cmdfunc(mtd, NAND_CMD_RNDOUT,
 			      offset + mtd->writesize, -1);
 
@@ -858,12 +963,8 @@ static void sunxi_nfc_hw_ecc_read_extra_oob(struct mtd_info *mtd,
 		sunxi_nfc_randomizer_read_buf(mtd, oob + offset, len,
 					      false, page);
 
-	*cur_off = mtd->oobsize + mtd->writesize;
-}
-
-static inline u32 sunxi_nfc_buf_to_user_data(const u8 *buf)
-{
-	return buf[0] | (buf[1] << 8) | (buf[2] << 16) | (buf[3] << 24);
+	if (cur_off)
+		*cur_off = mtd->oobsize + mtd->writesize;
 }
 
 static int sunxi_nfc_hw_ecc_write_chunk(struct mtd_info *mtd,
@@ -882,19 +983,6 @@ static int sunxi_nfc_hw_ecc_write_chunk(struct mtd_info *mtd,
 
 	sunxi_nfc_randomizer_write_buf(mtd, data, ecc->size, false, page);
 
-	/* Fill OOB data in */
-	if ((nand->options & NAND_NEED_SCRAMBLING) && bbm) {
-		u8 user_data[4];
-
-		memcpy(user_data, oob, 4);
-		sunxi_nfc_randomize_bbm(mtd, page, user_data);
-		writel(sunxi_nfc_buf_to_user_data(user_data),
-		       nfc->regs + NFC_REG_USER_DATA(0));
-	} else {
-		writel(sunxi_nfc_buf_to_user_data(oob),
-		       nfc->regs + NFC_REG_USER_DATA(0));
-	}
-
 	if (data_off + ecc->size != oob_off)
 		nand->cmdfunc(mtd, NAND_CMD_RNDIN, oob_off, -1);
 
@@ -903,11 +991,13 @@ static int sunxi_nfc_hw_ecc_write_chunk(struct mtd_info *mtd,
 		return ret;
 
 	sunxi_nfc_randomizer_enable(mtd);
+	sunxi_nfc_hw_ecc_set_prot_oob_bytes(mtd, oob, 0, bbm, page);
+
 	writel(NFC_DATA_TRANS | NFC_DATA_SWAP_METHOD |
 	       NFC_ACCESS_DIR | NFC_ECC_OP,
 	       nfc->regs + NFC_REG_CMD);
 
-	ret = sunxi_nfc_wait_int(nfc, NFC_CMD_INT_FLAG, 0);
+	ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, true, 0);
 	sunxi_nfc_randomizer_disable(mtd);
 	if (ret)
 		return ret;
@@ -929,13 +1019,14 @@ static void sunxi_nfc_hw_ecc_write_extra_oob(struct mtd_info *mtd,
 	if (len <= 0)
 		return;
 
-	if (*cur_off != offset)
+	if (!cur_off || *cur_off != offset)
 		nand->cmdfunc(mtd, NAND_CMD_RNDIN,
 			      offset + mtd->writesize, -1);
 
 	sunxi_nfc_randomizer_write_buf(mtd, oob + offset, len, false, page);
 
-	*cur_off = mtd->oobsize + mtd->writesize;
+	if (cur_off)
+		*cur_off = mtd->oobsize + mtd->writesize;
 }
 
 static int sunxi_nfc_hw_ecc_read_page(struct mtd_info *mtd,
@@ -958,7 +1049,7 @@ static int sunxi_nfc_hw_ecc_read_page(struct mtd_info *mtd,
 		ret = sunxi_nfc_hw_ecc_read_chunk(mtd, data, data_off, oob,
 						  oob_off + mtd->writesize,
 						  &cur_off, &max_bitflips,
-						  !i, page);
+						  !i, oob_required, page);
 		if (ret < 0)
 			return ret;
 		else if (ret)
@@ -974,6 +1065,39 @@ static int sunxi_nfc_hw_ecc_read_page(struct mtd_info *mtd,
 	return max_bitflips;
 }
 
+static int sunxi_nfc_hw_ecc_read_subpage(struct mtd_info *mtd,
+					 struct nand_chip *chip,
+					 u32 data_offs, u32 readlen,
+					 u8 *bufpoi, int page)
+{
+	struct nand_ecc_ctrl *ecc = &chip->ecc;
+	int ret, i, cur_off = 0;
+	unsigned int max_bitflips = 0;
+
+	sunxi_nfc_hw_ecc_enable(mtd);
+
+	chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
+	for (i = data_offs / ecc->size;
+	     i < DIV_ROUND_UP(data_offs + readlen, ecc->size); i++) {
+		int data_off = i * ecc->size;
+		int oob_off = i * (ecc->bytes + 4);
+		u8 *data = bufpoi + data_off;
+		u8 *oob = chip->oob_poi + oob_off;
+
+		ret = sunxi_nfc_hw_ecc_read_chunk(mtd, data, data_off,
+						  oob,
+						  oob_off + mtd->writesize,
+						  &cur_off, &max_bitflips, !i,
+						  false, page);
+		if (ret < 0)
+			return ret;
+	}
+
+	sunxi_nfc_hw_ecc_disable(mtd);
+
+	return max_bitflips;
+}
+
 static int sunxi_nfc_hw_ecc_write_page(struct mtd_info *mtd,
 				       struct nand_chip *chip,
 				       const uint8_t *buf, int oob_required,
@@ -1026,7 +1150,9 @@ static int sunxi_nfc_hw_syndrome_ecc_read_page(struct mtd_info *mtd,
 
 		ret = sunxi_nfc_hw_ecc_read_chunk(mtd, data, data_off, oob,
 						  oob_off, &cur_off,
-						  &max_bitflips, !i, page);
+						  &max_bitflips, !i,
+						  oob_required,
+						  page);
 		if (ret < 0)
 			return ret;
 		else if (ret)
@@ -1074,6 +1200,40 @@ static int sunxi_nfc_hw_syndrome_ecc_write_page(struct mtd_info *mtd,
 	return 0;
 }
 
+static int sunxi_nfc_hw_common_ecc_read_oob(struct mtd_info *mtd,
+					    struct nand_chip *chip,
+					    int page)
+{
+	chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
+
+	chip->pagebuf = -1;
+
+	return chip->ecc.read_page(mtd, chip, chip->buffers->databuf, 1, page);
+}
+
+static int sunxi_nfc_hw_common_ecc_write_oob(struct mtd_info *mtd,
+					     struct nand_chip *chip,
+					     int page)
+{
+	int ret, status;
+
+	chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0, page);
+
+	chip->pagebuf = -1;
+
+	memset(chip->buffers->databuf, 0xff, mtd->writesize);
+	ret = chip->ecc.write_page(mtd, chip, chip->buffers->databuf, 1, page);
+	if (ret)
+		return ret;
+
+	/* Send command to program the OOB data */
+	chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+
+	status = chip->waitfunc(mtd, chip);
+
+	return status & NAND_STATUS_FAIL ? -EIO : 0;
+}
+
 static const s32 tWB_lut[] = {6, 12, 16, 20};
 static const s32 tRHW_lut[] = {4, 8, 12, 20};
 
@@ -1101,6 +1261,7 @@ static int sunxi_nand_chip_set_timings(struct sunxi_nand_chip *chip,
 	struct sunxi_nfc *nfc = to_sunxi_nfc(chip->nand.controller);
 	u32 min_clk_period = 0;
 	s32 tWB, tADL, tWHR, tRHW, tCAD;
+	long real_clk_rate;
 
 	/* T1 <=> tCLS */
 	if (timings->tCLS_min > min_clk_period)
@@ -1163,6 +1324,18 @@ static int sunxi_nand_chip_set_timings(struct sunxi_nand_chip *chip,
 		min_clk_period = DIV_ROUND_UP(timings->tWC_min, 2);
 
 	/* T16 - T19 + tCAD */
+	if (timings->tWB_max > (min_clk_period * 20))
+		min_clk_period = DIV_ROUND_UP(timings->tWB_max, 20);
+
+	if (timings->tADL_min > (min_clk_period * 32))
+		min_clk_period = DIV_ROUND_UP(timings->tADL_min, 32);
+
+	if (timings->tWHR_min > (min_clk_period * 32))
+		min_clk_period = DIV_ROUND_UP(timings->tWHR_min, 32);
+
+	if (timings->tRHW_min > (min_clk_period * 20))
+		min_clk_period = DIV_ROUND_UP(timings->tRHW_min, 20);
+
 	tWB  = sunxi_nand_lookup_timing(tWB_lut, timings->tWB_max,
 					min_clk_period);
 	if (tWB < 0) {
@@ -1198,23 +1371,26 @@ static int sunxi_nand_chip_set_timings(struct sunxi_nand_chip *chip,
 	/* TODO: A83 has some more bits for CDQSS, CS, CLHZ, CCS, WC */
 	chip->timing_cfg = NFC_TIMING_CFG(tWB, tADL, tWHR, tRHW, tCAD);
 
-	/*
-	 * ONFI specification 3.1, paragraph 4.15.2 dictates that EDO data
-	 * output cycle timings shall be used if the host drives tRC less than
-	 * 30 ns.
-	 */
-	chip->timing_ctl = (timings->tRC_min < 30000) ? NFC_TIMING_CTL_EDO : 0;
-
 	/* Convert min_clk_period from picoseconds to nanoseconds */
 	min_clk_period = DIV_ROUND_UP(min_clk_period, 1000);
 
 	/*
-	 * Convert min_clk_period into a clk frequency, then get the
-	 * appropriate rate for the NAND controller IP given this formula
-	 * (specified in the datasheet):
-	 * nand clk_rate = 2 * min_clk_rate
+	 * Unlike what is stated in Allwinner datasheet, the clk_rate should
+	 * be set to (1 / min_clk_period), and not (2 / min_clk_period).
+	 * This new formula was verified with a scope and validated by
+	 * Allwinner engineers.
 	 */
-	chip->clk_rate = (2 * NSEC_PER_SEC) / min_clk_period;
+	chip->clk_rate = NSEC_PER_SEC / min_clk_period;
+	real_clk_rate = clk_round_rate(nfc->mod_clk, chip->clk_rate);
+
+	/*
+	 * ONFI specification 3.1, paragraph 4.15.2 dictates that EDO data
+	 * output cycle timings shall be used if the host drives tRC less than
+	 * 30 ns.
+	 */
+	min_clk_period = NSEC_PER_SEC / real_clk_rate;
+	chip->timing_ctl = ((min_clk_period * 2) < 30) ?
+			   NFC_TIMING_CTL_EDO : 0;
 
 	return 0;
 }
@@ -1257,6 +1433,57 @@ static int sunxi_nand_chip_init_timings(struct sunxi_nand_chip *chip,
 	return sunxi_nand_chip_set_timings(chip, timings);
 }
 
+static int sunxi_nand_ooblayout_ecc(struct mtd_info *mtd, int section,
+				    struct mtd_oob_region *oobregion)
+{
+	struct nand_chip *nand = mtd_to_nand(mtd);
+	struct nand_ecc_ctrl *ecc = &nand->ecc;
+
+	if (section >= ecc->steps)
+		return -ERANGE;
+
+	oobregion->offset = section * (ecc->bytes + 4) + 4;
+	oobregion->length = ecc->bytes;
+
+	return 0;
+}
+
+static int sunxi_nand_ooblayout_free(struct mtd_info *mtd, int section,
+				     struct mtd_oob_region *oobregion)
+{
+	struct nand_chip *nand = mtd_to_nand(mtd);
+	struct nand_ecc_ctrl *ecc = &nand->ecc;
+
+	if (section > ecc->steps)
+		return -ERANGE;
+
+	/*
+	 * The first 2 bytes are used for BB markers, hence we
+	 * only have 2 bytes available in the first user data
+	 * section.
+	 */
+	if (!section && ecc->mode == NAND_ECC_HW) {
+		oobregion->offset = 2;
+		oobregion->length = 2;
+
+		return 0;
+	}
+
+	oobregion->offset = section * (ecc->bytes + 4);
+
+	if (section < ecc->steps)
+		oobregion->length = 4;
+	else
+		oobregion->offset = mtd->oobsize - oobregion->offset;
+
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops sunxi_nand_ooblayout_ops = {
+	.ecc = sunxi_nand_ooblayout_ecc,
+	.free = sunxi_nand_ooblayout_free,
+};
+
 static int sunxi_nand_hw_common_ecc_ctrl_init(struct mtd_info *mtd,
 					      struct nand_ecc_ctrl *ecc,
 					      struct device_node *np)
@@ -1266,7 +1493,6 @@ static int sunxi_nand_hw_common_ecc_ctrl_init(struct mtd_info *mtd,
 	struct sunxi_nand_chip *sunxi_nand = to_sunxi_nand(nand);
 	struct sunxi_nfc *nfc = to_sunxi_nfc(sunxi_nand->nand.controller);
 	struct sunxi_nand_hw_ecc *data;
-	struct nand_ecclayout *layout;
 	int nsectors;
 	int ret;
 	int i;
@@ -1295,7 +1521,6 @@ static int sunxi_nand_hw_common_ecc_ctrl_init(struct mtd_info *mtd,
 	/* HW ECC always work with even numbers of ECC bytes */
 	ecc->bytes = ALIGN(ecc->bytes, 2);
 
-	layout = &data->layout;
 	nsectors = mtd->writesize / ecc->size;
 
 	if (mtd->oobsize < ((ecc->bytes + 4) * nsectors)) {
@@ -1303,9 +1528,9 @@ static int sunxi_nand_hw_common_ecc_ctrl_init(struct mtd_info *mtd,
 		goto err;
 	}
 
-	layout->eccbytes = (ecc->bytes * nsectors);
-
-	ecc->layout = layout;
+	ecc->read_oob = sunxi_nfc_hw_common_ecc_read_oob;
+	ecc->write_oob = sunxi_nfc_hw_common_ecc_write_oob;
+	mtd_set_ooblayout(mtd, &sunxi_nand_ooblayout_ops);
 	ecc->priv = data;
 
 	return 0;
@@ -1325,9 +1550,6 @@ static int sunxi_nand_hw_ecc_ctrl_init(struct mtd_info *mtd,
 				       struct nand_ecc_ctrl *ecc,
 				       struct device_node *np)
 {
-	struct nand_ecclayout *layout;
-	int nsectors;
-	int i, j;
 	int ret;
 
 	ret = sunxi_nand_hw_common_ecc_ctrl_init(mtd, ecc, np);
@@ -1336,40 +1558,9 @@ static int sunxi_nand_hw_ecc_ctrl_init(struct mtd_info *mtd,
 
 	ecc->read_page = sunxi_nfc_hw_ecc_read_page;
 	ecc->write_page = sunxi_nfc_hw_ecc_write_page;
-	layout = ecc->layout;
-	nsectors = mtd->writesize / ecc->size;
-
-	for (i = 0; i < nsectors; i++) {
-		if (i) {
-			layout->oobfree[i].offset =
-				layout->oobfree[i - 1].offset +
-				layout->oobfree[i - 1].length +
-				ecc->bytes;
-			layout->oobfree[i].length = 4;
-		} else {
-			/*
-			 * The first 2 bytes are used for BB markers, hence we
-			 * only have 2 bytes available in the first user data
-			 * section.
-			 */
-			layout->oobfree[i].length = 2;
-			layout->oobfree[i].offset = 2;
-		}
-
-		for (j = 0; j < ecc->bytes; j++)
-			layout->eccpos[(ecc->bytes * i) + j] =
-					layout->oobfree[i].offset +
-					layout->oobfree[i].length + j;
-	}
-
-	if (mtd->oobsize > (ecc->bytes + 4) * nsectors) {
-		layout->oobfree[nsectors].offset =
-				layout->oobfree[nsectors - 1].offset +
-				layout->oobfree[nsectors - 1].length +
-				ecc->bytes;
-		layout->oobfree[nsectors].length = mtd->oobsize -
-				((ecc->bytes + 4) * nsectors);
-	}
+	ecc->read_oob_raw = nand_read_oob_std;
+	ecc->write_oob_raw = nand_write_oob_std;
+	ecc->read_subpage = sunxi_nfc_hw_ecc_read_subpage;
 
 	return 0;
 }
@@ -1378,9 +1569,6 @@ static int sunxi_nand_hw_syndrome_ecc_ctrl_init(struct mtd_info *mtd,
 						struct nand_ecc_ctrl *ecc,
 						struct device_node *np)
 {
-	struct nand_ecclayout *layout;
-	int nsectors;
-	int i;
 	int ret;
 
 	ret = sunxi_nand_hw_common_ecc_ctrl_init(mtd, ecc, np);
@@ -1390,15 +1578,8 @@ static int sunxi_nand_hw_syndrome_ecc_ctrl_init(struct mtd_info *mtd,
 	ecc->prepad = 4;
 	ecc->read_page = sunxi_nfc_hw_syndrome_ecc_read_page;
 	ecc->write_page = sunxi_nfc_hw_syndrome_ecc_write_page;
-
-	layout = ecc->layout;
-	nsectors = mtd->writesize / ecc->size;
-
-	for (i = 0; i < (ecc->bytes * nsectors); i++)
-		layout->eccpos[i] = i;
-
-	layout->oobfree[0].length = mtd->oobsize - i;
-	layout->oobfree[0].offset = i;
+	ecc->read_oob_raw = nand_read_oob_syndrome;
+	ecc->write_oob_raw = nand_write_oob_syndrome;
 
 	return 0;
 }
@@ -1411,7 +1592,6 @@ static void sunxi_nand_ecc_cleanup(struct nand_ecc_ctrl *ecc)
 		sunxi_nand_hw_common_ecc_ctrl_cleanup(ecc);
 		break;
 	case NAND_ECC_NONE:
-		kfree(ecc->layout);
 	default:
 		break;
 	}
@@ -1432,8 +1612,6 @@ static int sunxi_nand_ecc_init(struct mtd_info *mtd, struct nand_ecc_ctrl *ecc,
 		return -EINVAL;
 
 	switch (ecc->mode) {
-	case NAND_ECC_SOFT_BCH:
-		break;
 	case NAND_ECC_HW:
 		ret = sunxi_nand_hw_ecc_ctrl_init(mtd, ecc, np);
 		if (ret)
@@ -1445,10 +1623,6 @@ static int sunxi_nand_ecc_init(struct mtd_info *mtd, struct nand_ecc_ctrl *ecc,
 			return ret;
 		break;
 	case NAND_ECC_NONE:
-		ecc->layout = kzalloc(sizeof(*ecc->layout), GFP_KERNEL);
-		if (!ecc->layout)
-			return -ENOMEM;
-		ecc->layout->oobfree[0].length = mtd->oobsize;
 	case NAND_ECC_SOFT:
 		break;
 	default:
@@ -1536,21 +1710,6 @@ static int sunxi_nand_chip_init(struct device *dev, struct sunxi_nfc *nfc,
 		}
 	}
 
-	timings = onfi_async_timing_mode_to_sdr_timings(0);
-	if (IS_ERR(timings)) {
-		ret = PTR_ERR(timings);
-		dev_err(dev,
-			"could not retrieve timings for ONFI mode 0: %d\n",
-			ret);
-		return ret;
-	}
-
-	ret = sunxi_nand_chip_set_timings(chip, timings);
-	if (ret) {
-		dev_err(dev, "could not configure chip timings: %d\n", ret);
-		return ret;
-	}
-
 	nand = &chip->nand;
 	/* Default tR value specified in the ONFI spec (chapter 4.15.1) */
 	nand->chip_delay = 200;
@@ -1570,6 +1729,21 @@ static int sunxi_nand_chip_init(struct device *dev, struct sunxi_nfc *nfc,
 	mtd = nand_to_mtd(nand);
 	mtd->dev.parent = dev;
 
+	timings = onfi_async_timing_mode_to_sdr_timings(0);
+	if (IS_ERR(timings)) {
+		ret = PTR_ERR(timings);
+		dev_err(dev,
+			"could not retrieve timings for ONFI mode 0: %d\n",
+			ret);
+		return ret;
+	}
+
+	ret = sunxi_nand_chip_set_timings(chip, timings);
+	if (ret) {
+		dev_err(dev, "could not configure chip timings: %d\n", ret);
+		return ret;
+	}
+
 	ret = nand_scan_ident(mtd, nsels, NULL);
 	if (ret)
 		return ret;
@@ -1580,6 +1754,8 @@ static int sunxi_nand_chip_init(struct device *dev, struct sunxi_nfc *nfc,
 	if (nand->options & NAND_NEED_SCRAMBLING)
 		nand->options |= NAND_NO_SUBPAGE_WRITE;
 
+	nand->options |= NAND_SUBPAGE_READ;
+
 	ret = sunxi_nand_chip_init_timings(chip, np);
 	if (ret) {
 		dev_err(dev, "could not configure chip timings: %d\n", ret);
@@ -1728,6 +1904,8 @@ static int sunxi_nfc_remove(struct platform_device *pdev)
 	struct sunxi_nfc *nfc = platform_get_drvdata(pdev);
 
 	sunxi_nand_chips_cleanup(nfc);
+	clk_disable_unprepare(nfc->mod_clk);
+	clk_disable_unprepare(nfc->ahb_clk);
 
 	return 0;
 }
diff --git a/drivers/mtd/nand/vf610_nfc.c b/drivers/mtd/nand/vf610_nfc.c
index 293feb1..3ad514c 100644
--- a/drivers/mtd/nand/vf610_nfc.c
+++ b/drivers/mtd/nand/vf610_nfc.c
@@ -33,7 +33,6 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
-#include <linux/of_mtd.h>
 #include <linux/of_device.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/platform_device.h>
@@ -175,34 +174,6 @@ static inline struct vf610_nfc *mtd_to_nfc(struct mtd_info *mtd)
 	return container_of(mtd_to_nand(mtd), struct vf610_nfc, chip);
 }
 
-static struct nand_ecclayout vf610_nfc_ecc45 = {
-	.eccbytes = 45,
-	.eccpos = {19, 20, 21, 22, 23,
-		   24, 25, 26, 27, 28, 29, 30, 31,
-		   32, 33, 34, 35, 36, 37, 38, 39,
-		   40, 41, 42, 43, 44, 45, 46, 47,
-		   48, 49, 50, 51, 52, 53, 54, 55,
-		   56, 57, 58, 59, 60, 61, 62, 63},
-	.oobfree = {
-		{.offset = 2,
-		 .length = 17} }
-};
-
-static struct nand_ecclayout vf610_nfc_ecc60 = {
-	.eccbytes = 60,
-	.eccpos = { 4,  5,  6,  7,  8,  9, 10, 11,
-		   12, 13, 14, 15, 16, 17, 18, 19,
-		   20, 21, 22, 23, 24, 25, 26, 27,
-		   28, 29, 30, 31, 32, 33, 34, 35,
-		   36, 37, 38, 39, 40, 41, 42, 43,
-		   44, 45, 46, 47, 48, 49, 50, 51,
-		   52, 53, 54, 55, 56, 57, 58, 59,
-		   60, 61, 62, 63 },
-	.oobfree = {
-		{.offset = 2,
-		 .length = 2} }
-};
-
 static inline u32 vf610_nfc_read(struct vf610_nfc *nfc, uint reg)
 {
 	return readl(nfc->regs + reg);
@@ -781,14 +752,16 @@ static int vf610_nfc_probe(struct platform_device *pdev)
 		if (mtd->oobsize > 64)
 			mtd->oobsize = 64;
 
+		/*
+		 * mtd->ecclayout is not specified here because we're using the
+		 * default large page ECC layout defined in NAND core.
+		 */
 		if (chip->ecc.strength == 32) {
 			nfc->ecc_mode = ECC_60_BYTE;
 			chip->ecc.bytes = 60;
-			chip->ecc.layout = &vf610_nfc_ecc60;
 		} else if (chip->ecc.strength == 24) {
 			nfc->ecc_mode = ECC_45_BYTE;
 			chip->ecc.bytes = 45;
-			chip->ecc.layout = &vf610_nfc_ecc45;
 		} else {
 			dev_err(nfc->dev, "Unsupported ECC strength\n");
 			err = -ENXIO;