summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/nand
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2010-02-26 16:54:27 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2010-02-26 16:54:27 -0800
commit64d497f55379b1e320a08ec2426468d96f5642ec (patch)
tree22b9ab3c5e69c5cc2728cbc2ca7fc7623beef8f1 /drivers/mtd/nand
parent37d4008484977f60d5d37499a2670c79b214dd46 (diff)
parentb5f5fe80fa98a60daa0fa94512d1599b1e26674c (diff)
downloadop-kernel-dev-64d497f55379b1e320a08ec2426468d96f5642ec.zip
op-kernel-dev-64d497f55379b1e320a08ec2426468d96f5642ec.tar.gz
Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (187 commits) sh: remove dead LED code for migo-r and ms7724se sh: ecovec build fix for CONFIG_I2C=n sh: ecovec r-standby support sh: ms7724se r-standby support sh: SH-Mobile R-standby register save/restore clocksource: Fix up a registration/IRQ race in the sh drivers. sh: ms7724: modify scan_timing for KEYSC sh: ms7724: Add sh_sir support sh: mach-ecovec24: Add sh_sir support sh: wire up SET/GET_UNALIGN_CTL. sh: allow alignment fault mode to be configured at kernel boot. sh: sh7724: Update FSI/SPU2 clock sh: always enable sh7724 vpu_clk and set to 166MHz on Ecovec sh: add sh7724 kick callback to clk_div4_table sh: introduce struct clk_div4_table sh: clock-cpg div4 set_rate() shift fix sh: Turn on speculative return for SH7785 and SH7786 sh: Merge legacy and dynamic PMB modes. sh: Use uncached I/O helpers in PMB setup. sh: Provide uncached I/O helpers. ...
Diffstat (limited to 'drivers/mtd/nand')
-rw-r--r--drivers/mtd/nand/Kconfig4
-rw-r--r--drivers/mtd/nand/sh_flctl.c69
2 files changed, 51 insertions, 22 deletions
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 677cd53..bb64656 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -457,10 +457,10 @@ config MTD_NAND_NOMADIK
config MTD_NAND_SH_FLCTL
tristate "Support for NAND on Renesas SuperH FLCTL"
- depends on MTD_NAND && SUPERH && CPU_SUBTYPE_SH7723
+ depends on MTD_NAND && SUPERH
help
Several Renesas SuperH CPU has FLCTL. This option enables support
- for NAND Flash using FLCTL. This driver support SH7723.
+ for NAND Flash using FLCTL.
config MTD_NAND_DAVINCI
tristate "Support NAND on DaVinci SoC"
diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c
index 02bef21..1842df8 100644
--- a/drivers/mtd/nand/sh_flctl.c
+++ b/drivers/mtd/nand/sh_flctl.c
@@ -1,10 +1,10 @@
/*
* SuperH FLCTL nand controller
*
- * Copyright © 2008 Renesas Solutions Corp.
- * Copyright © 2008 Atom Create Engineering Co., Ltd.
+ * Copyright (c) 2008 Renesas Solutions Corp.
+ * Copyright (c) 2008 Atom Create Engineering Co., Ltd.
*
- * Based on fsl_elbc_nand.c, Copyright © 2006-2007 Freescale Semiconductor
+ * Based on fsl_elbc_nand.c, Copyright (c) 2006-2007 Freescale Semiconductor
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -75,6 +75,11 @@ static void start_translation(struct sh_flctl *flctl)
writeb(TRSTRT, FLTRCR(flctl));
}
+static void timeout_error(struct sh_flctl *flctl, const char *str)
+{
+ dev_err(&flctl->pdev->dev, "Timeout occured in %s\n", str);
+}
+
static void wait_completion(struct sh_flctl *flctl)
{
uint32_t timeout = LOOP_TIMEOUT_MAX;
@@ -87,7 +92,7 @@ static void wait_completion(struct sh_flctl *flctl)
udelay(1);
}
- printk(KERN_ERR "wait_completion(): Timeout occured \n");
+ timeout_error(flctl, __func__);
writeb(0x0, FLTRCR(flctl));
}
@@ -100,6 +105,8 @@ static void set_addr(struct mtd_info *mtd, int column, int page_addr)
addr = page_addr; /* ERASE1 */
} else if (page_addr != -1) {
/* SEQIN, READ0, etc.. */
+ if (flctl->chip.options & NAND_BUSWIDTH_16)
+ column >>= 1;
if (flctl->page_size) {
addr = column & 0x0FFF;
addr |= (page_addr & 0xff) << 16;
@@ -132,7 +139,7 @@ static void wait_rfifo_ready(struct sh_flctl *flctl)
return;
udelay(1);
}
- printk(KERN_ERR "wait_rfifo_ready(): Timeout occured \n");
+ timeout_error(flctl, __func__);
}
static void wait_wfifo_ready(struct sh_flctl *flctl)
@@ -146,7 +153,7 @@ static void wait_wfifo_ready(struct sh_flctl *flctl)
return;
udelay(1);
}
- printk(KERN_ERR "wait_wfifo_ready(): Timeout occured \n");
+ timeout_error(flctl, __func__);
}
static int wait_recfifo_ready(struct sh_flctl *flctl, int sector_number)
@@ -198,7 +205,7 @@ static int wait_recfifo_ready(struct sh_flctl *flctl, int sector_number)
writel(0, FL4ECCCR(flctl));
}
- printk(KERN_ERR "wait_recfifo_ready(): Timeout occured \n");
+ timeout_error(flctl, __func__);
return 1; /* timeout */
}
@@ -214,7 +221,7 @@ static void wait_wecfifo_ready(struct sh_flctl *flctl)
return;
udelay(1);
}
- printk(KERN_ERR "wait_wecfifo_ready(): Timeout occured \n");
+ timeout_error(flctl, __func__);
}
static void read_datareg(struct sh_flctl *flctl, int offset)
@@ -275,7 +282,7 @@ static void write_fiforeg(struct sh_flctl *flctl, int rlen, int offset)
static void set_cmd_regs(struct mtd_info *mtd, uint32_t cmd, uint32_t flcmcdr_val)
{
struct sh_flctl *flctl = mtd_to_flctl(mtd);
- uint32_t flcmncr_val = readl(FLCMNCR(flctl));
+ uint32_t flcmncr_val = readl(FLCMNCR(flctl)) & ~SEL_16BIT;
uint32_t flcmdcr_val, addr_len_bytes = 0;
/* Set SNAND bit if page size is 2048byte */
@@ -297,6 +304,8 @@ static void set_cmd_regs(struct mtd_info *mtd, uint32_t cmd, uint32_t flcmcdr_va
case NAND_CMD_READOOB:
addr_len_bytes = flctl->rw_ADRCNT;
flcmdcr_val |= CDSRC_E;
+ if (flctl->chip.options & NAND_BUSWIDTH_16)
+ flcmncr_val |= SEL_16BIT;
break;
case NAND_CMD_SEQIN:
/* This case is that cmd is READ0 or READ1 or READ00 */
@@ -305,6 +314,8 @@ static void set_cmd_regs(struct mtd_info *mtd, uint32_t cmd, uint32_t flcmcdr_va
case NAND_CMD_PAGEPROG:
addr_len_bytes = flctl->rw_ADRCNT;
flcmdcr_val |= DOCMD2_E | CDSRC_E | SELRW;
+ if (flctl->chip.options & NAND_BUSWIDTH_16)
+ flcmncr_val |= SEL_16BIT;
break;
case NAND_CMD_READID:
flcmncr_val &= ~SNAND_E;
@@ -523,6 +534,8 @@ static void flctl_cmdfunc(struct mtd_info *mtd, unsigned int command,
set_addr(mtd, 0, page_addr);
flctl->read_bytes = mtd->writesize + mtd->oobsize;
+ if (flctl->chip.options & NAND_BUSWIDTH_16)
+ column >>= 1;
flctl->index += column;
goto read_normal_exit;
@@ -686,6 +699,18 @@ static uint8_t flctl_read_byte(struct mtd_info *mtd)
return data;
}
+static uint16_t flctl_read_word(struct mtd_info *mtd)
+{
+ struct sh_flctl *flctl = mtd_to_flctl(mtd);
+ int index = flctl->index;
+ uint16_t data;
+ uint16_t *buf = (uint16_t *)&flctl->done_buff[index];
+
+ data = *buf;
+ flctl->index += 2;
+ return data;
+}
+
static void flctl_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
{
int i;
@@ -769,38 +794,36 @@ static int flctl_chip_init_tail(struct mtd_info *mtd)
return 0;
}
-static int __init flctl_probe(struct platform_device *pdev)
+static int __devinit flctl_probe(struct platform_device *pdev)
{
struct resource *res;
struct sh_flctl *flctl;
struct mtd_info *flctl_mtd;
struct nand_chip *nand;
struct sh_flctl_platform_data *pdata;
- int ret;
+ int ret = -ENXIO;
pdata = pdev->dev.platform_data;
if (pdata == NULL) {
- printk(KERN_ERR "sh_flctl platform_data not found.\n");
- return -ENODEV;
+ dev_err(&pdev->dev, "no platform data defined\n");
+ return -EINVAL;
}
flctl = kzalloc(sizeof(struct sh_flctl), GFP_KERNEL);
if (!flctl) {
- printk(KERN_ERR "Unable to allocate NAND MTD dev structure.\n");
+ dev_err(&pdev->dev, "failed to allocate driver data\n");
return -ENOMEM;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
- printk(KERN_ERR "%s: resource not found.\n", __func__);
- ret = -ENODEV;
+ dev_err(&pdev->dev, "failed to get I/O memory\n");
goto err;
}
- flctl->reg = ioremap(res->start, res->end - res->start + 1);
+ flctl->reg = ioremap(res->start, resource_size(res));
if (flctl->reg == NULL) {
- printk(KERN_ERR "%s: ioremap error.\n", __func__);
- ret = -ENOMEM;
+ dev_err(&pdev->dev, "failed to remap I/O memory\n");
goto err;
}
@@ -808,6 +831,7 @@ static int __init flctl_probe(struct platform_device *pdev)
flctl_mtd = &flctl->mtd;
nand = &flctl->chip;
flctl_mtd->priv = nand;
+ flctl->pdev = pdev;
flctl->hwecc = pdata->has_hwecc;
flctl_register_init(flctl, pdata->flcmncr_val);
@@ -825,6 +849,11 @@ static int __init flctl_probe(struct platform_device *pdev)
nand->select_chip = flctl_select_chip;
nand->cmdfunc = flctl_cmdfunc;
+ if (pdata->flcmncr_val & SEL_16BIT) {
+ nand->options |= NAND_BUSWIDTH_16;
+ nand->read_word = flctl_read_word;
+ }
+
ret = nand_scan_ident(flctl_mtd, 1);
if (ret)
goto err;
@@ -846,7 +875,7 @@ err:
return ret;
}
-static int __exit flctl_remove(struct platform_device *pdev)
+static int __devexit flctl_remove(struct platform_device *pdev)
{
struct sh_flctl *flctl = platform_get_drvdata(pdev);
OpenPOWER on IntegriCloud