Merge tag 'for-linus-20131112' of git://git.infradead.org/linux-mtd

Pull MTD changes from Brian Norris:
 - Unify some compile-time differences so that we have fewer uses of
   #ifdef CONFIG_OF in atmel_nand
 - Other general cleanups (removing unused functions, options,
   variables, fields; use correct interfaces)
 - Fix BUG() for new odd-sized NAND, which report non-power-of-2
   dimensions via ONFI
 - Miscellaneous driver fixes (SPI NOR flash; BCM47xx NAND flash; etc.)
 - Improve differentiation between SLC and MLC NAND -- this clarifies an
   ABI issue regarding the MTD "type" (in sysfs and in the MEMGETINFO
   ioctl), where the MTD_MLCNANDFLASH type was present but
   inconsistently used
 - Extend GPMI NAND to support multi-chip-select NAND for some platforms
 - Many improvements to the OMAP2/3 NAND driver, including an expanded
   DT binding to bring us closer to mainline support for some OMAP
   systems
 - Fix a deadlock in the error path of the Atmel NAND driver probe
 - Correct the error codes from MTD mmap() to conform to POSIX and the
   Linux Programmer's Manual.  This is an acknowledged change in the MTD
   ABI, but I can't imagine somebody relying on the non-standard -ENOSYS
   error code specifically.  Am I just being unimaginative? :)
 - Fix a few important GPMI NAND bugs (one regression from 3.12 and one
   long-standing race condition)
 - More? Read the log!

* tag 'for-linus-20131112' of git://git.infradead.org/linux-mtd: (98 commits)
  mtd: gpmi: fix the NULL pointer
  mtd: gpmi: fix kernel BUG due to racing DMA operations
  mtd: mtdchar: return expected errors on mmap() call
  mtd: gpmi: only scan two chips for imx6
  mtd: gpmi: Use devm_kzalloc()
  mtd: atmel_nand: fix bug driver will in a dead lock if no nand detected
  mtd: nand: use a local variable to simplify the nand_scan_tail
  mtd: nand: remove deprecated IRQF_DISABLED
  mtd: dataflash: Say if we find a device we don't support
  mtd: nand: omap: fix error return code in omap_nand_probe()
  mtd: nand_bbt: kill NAND_BBT_SCANALLPAGES
  mtd: m25p80: fixup device removal failure path
  mtd: mxc_nand: Include linux/of.h header
  mtd: remove duplicated include from mtdcore.c
  mtd: m25p80: add support for Macronix mx25l3255e
  mtd: nand: omap: remove selection of BCH ecc-scheme via KConfig
  mtd: nand: omap: updated devm_xx for all resource allocation and free calls
  mtd: nand: omap: use drivers/mtd/nand/nand_bch.c wrapper for BCH ECC instead of lib/bch.c
  mtd: nand: omap: clean-up ecc layout for BCH ecc schemes
  mtd: nand: omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in device_probe
  ...

1 files changed, 3 insertions, 35 deletions

diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
index bc06196..c0615d1 100644
--- a/drivers/mtd/nand/nand_bbt.c
+++ b/drivers/mtd/nand/nand_bbt.c
@@ -412,25 +412,6 @@ static void read_abs_bbts(struct mtd_info *mtd, uint8_t *buf,
 	}
 }
 
-/* Scan a given block full */
-static int scan_block_full(struct mtd_info *mtd, struct nand_bbt_descr *bd,
-			   loff_t offs, uint8_t *buf, size_t readlen,
-			   int scanlen, int numpages)
-{
-	int ret, j;
-
-	ret = scan_read_oob(mtd, buf, offs, readlen);
-	/* Ignore ECC errors when checking for BBM */
-	if (ret && !mtd_is_bitflip_or_eccerr(ret))
-		return ret;
-
-	for (j = 0; j < numpages; j++, buf += scanlen) {
-		if (check_pattern(buf, scanlen, mtd->writesize, bd))
-			return 1;
-	}
-	return 0;
-}
-
 /* Scan a given block partially */
 static int scan_block_fast(struct mtd_info *mtd, struct nand_bbt_descr *bd,
 			   loff_t offs, uint8_t *buf, int numpages)
@@ -477,24 +458,17 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
 	struct nand_bbt_descr *bd, int chip)
 {
 	struct nand_chip *this = mtd->priv;
-	int i, numblocks, numpages, scanlen;
+	int i, numblocks, numpages;
 	int startblock;
 	loff_t from;
-	size_t readlen;
 
 	pr_info("Scanning device for bad blocks\n");
 
-	if (bd->options & NAND_BBT_SCANALLPAGES)
-		numpages = 1 << (this->bbt_erase_shift - this->page_shift);
-	else if (bd->options & NAND_BBT_SCAN2NDPAGE)
+	if (bd->options & NAND_BBT_SCAN2NDPAGE)
 		numpages = 2;
 	else
 		numpages = 1;
 
-	/* We need only read few bytes from the OOB area */
-	scanlen = 0;
-	readlen = bd->len;
-
 	if (chip == -1) {
 		numblocks = mtd->size >> this->bbt_erase_shift;
 		startblock = 0;
@@ -519,12 +493,7 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
 
 		BUG_ON(bd->options & NAND_BBT_NO_OOB);
 
-		if (bd->options & NAND_BBT_SCANALLPAGES)
-			ret = scan_block_full(mtd, bd, from, buf, readlen,
-					      scanlen, numpages);
-		else
-			ret = scan_block_fast(mtd, bd, from, buf, numpages);
-
+		ret = scan_block_fast(mtd, bd, from, buf, numpages);
 		if (ret < 0)
 			return ret;
 
@@ -1392,4 +1361,3 @@ int nand_markbad_bbt(struct mtd_info *mtd, loff_t offs)
 }
 
 EXPORT_SYMBOL(nand_scan_bbt);
-EXPORT_SYMBOL(nand_default_bbt);