Merge master.kernel.org:/pub/scm/linux/kernel/git/tglx/mtd-2.6

19 files changed, 918 insertions, 1141 deletions

diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 2bea2e0..44781a8 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -1,5 +1,5 @@
 # drivers/mtd/maps/Kconfig
-# $Id: Kconfig,v 1.42 2005/01/05 16:59:50 dwmw2 Exp $
+# $Id: Kconfig,v 1.55 2005/07/02 01:53:24 tpoynor Exp $
 
 menu "Mapping drivers for chip access"
 	depends on MTD!=n
@@ -122,16 +122,6 @@ config MTD_SBC_GXX
 	  More info at
 	  <http://www.arcomcontrols.com/products/icp/pc104/processors/SBC_GX1.htm>.
 
-config MTD_ELAN_104NC
-	tristate "CFI Flash device mapped on Arcom ELAN-104NC"
-	depends on X86 && MTD_CFI_INTELEXT && MTD_PARTITIONS && MTD_COMPLEX_MAPPINGS
-	help
-	  This provides a driver for the on-board flash of the Arcom Control
-	  System's ELAN-104NC development board. By default the flash
-	  is split into 3 partitions which are accessed as separate MTD
-	  devices. This board utilizes Intel StrataFlash. More info at
-	  <http://www.arcomcontrols.com/products/icp/pc104/processors/ELAN104NC.htm>.
-
 config MTD_LUBBOCK
 	tristate "CFI Flash device mapped on Intel Lubbock XScale eval board"
 	depends on ARCH_LUBBOCK && MTD_CFI_INTELEXT && MTD_PARTITIONS
@@ -139,6 +129,14 @@ config MTD_LUBBOCK
 	  This provides a driver for the on-board flash of the Intel
 	  'Lubbock' XScale evaluation board.
 
+config MTD_MAINSTONE
+	tristate "CFI Flash device mapped on Intel Mainstone XScale eval board"
+	depends on MACH_MAINSTONE && MTD_CFI_INTELEXT
+	select MTD_PARTITIONS
+	help
+	  This provides a driver for the on-board flash of the Intel
+	  'Mainstone PXA27x evaluation board.
+
 config MTD_OCTAGON
 	tristate "JEDEC Flash device mapped on Octagon 5066 SBC"
 	depends on X86 && MTD_JEDEC && MTD_COMPLEX_MAPPINGS
@@ -213,74 +211,11 @@ config MTD_NETtel
 	help
 	  Support for flash chips on NETtel/SecureEdge/SnapGear boards.
 
-config MTD_PB1XXX
-	tristate "Flash devices on Alchemy PB1xxx boards"
-	depends on MIPS && ( MIPS_PB1000 || MIPS_PB1100 || MIPS_PB1500 )
-	help
-	  Flash memory access on Alchemy Pb1000/Pb1100/Pb1500 boards
-
-config MTD_PB1XXX_BOOT
-	bool "PB1x00 boot flash device"
-	depends on MTD_PB1XXX && ( MIPS_PB1100 || MIPS_PB1500 )
-	help
-	  Use the first of the two 32MiB flash banks on Pb1100/Pb1500 board.
-	  You can say 'Y' to both this and 'MTD_PB1XXX_USER' below, to use
-	  both banks.
-
-config MTD_PB1XXX_USER
-	bool "PB1x00 user flash device"
-	depends on MTD_PB1XXX && ( MIPS_PB1100 || MIPS_PB1500 )
-	default y if MTD_PB1XX_BOOT = n
-	help
-	  Use the second of the two 32MiB flash banks on Pb1100/Pb1500 board.
-	  You can say 'Y' to both this and 'MTD_PB1XXX_BOOT' above, to use
-	  both banks.
-
-config MTD_PB1550
-	tristate "Flash devices on Alchemy PB1550 board"
-	depends on MIPS && MIPS_PB1550
-	help
-	  Flash memory access on Alchemy Pb1550 board
-
-config MTD_PB1550_BOOT
-	bool "PB1550 boot flash device"
-	depends on MTD_PB1550
+config MTD_ALCHEMY
+	tristate '  AMD Alchemy Pb1xxx/Db1xxx/RDK MTD support' 
+	depends on MIPS && SOC_AU1X00
 	help
-	  Use the first of the two 64MiB flash banks on Pb1550 board.
-	  You can say 'Y' to both this and 'MTD_PB1550_USER' below, to use
-	  both banks.
-
-config MTD_PB1550_USER
-	bool "PB1550 user flash device"
-	depends on MTD_PB1550
-	default y if MTD_PB1550_BOOT = n
-	help
-	  Use the second of the two 64MiB flash banks on Pb1550 board.
-	  You can say 'Y' to both this and 'MTD_PB1550_BOOT' above, to use
-	  both banks.
-
-config MTD_DB1550
-	tristate "Flash devices on Alchemy DB1550 board"
-	depends on MIPS && MIPS_DB1550
-	help
-	  Flash memory access on Alchemy Db1550 board
-
-config MTD_DB1550_BOOT
-	bool "DB1550 boot flash device"
-	depends on MTD_DB1550
-	help
-	  Use the first of the two 64MiB flash banks on Db1550 board.
-	  You can say 'Y' to both this and 'MTD_DB1550_USER' below, to use
-	  both banks.
-
-config MTD_DB1550_USER
-	bool "DB1550 user flash device"
-	depends on MTD_DB1550
-	default y if MTD_DB1550_BOOT = n
-	help
-	  Use the second of the two 64MiB flash banks on Db1550 board.
-	  You can say 'Y' to both this and 'MTD_DB1550_BOOT' above, to use
-	  both banks.
+	  Flash memory access on AMD Alchemy Pb/Db/RDK Reference Boards
 
 config MTD_DILNETPC
 	tristate "CFI Flash device mapped on DIL/Net PC"
@@ -588,6 +523,15 @@ config MTD_MPC1211
 	  This enables access to the flash chips on the Interface MPC-1211(CTP/PCI/MPC-SH02).
 	  If you have such a board, say 'Y'.
 
+config MTD_OMAP_NOR
+	tristate "TI OMAP board mappings"
+	depends on MTD_CFI && ARCH_OMAP
+	help
+	  This enables access to the NOR flash chips on TI OMAP-based
+	  boards defining flash platform devices and flash platform data.
+	  These boards include the Innovator, H2, H3, OSK, Perseus2, and
+	  more.  If you have such a board, say 'Y'.
+
 # This needs CFI or JEDEC, depending on the cards found.
 config MTD_PCI
 	tristate "PCI MTD driver"
@@ -647,13 +591,14 @@ config MTD_DMV182
           Map driver for Dy-4 SVME/DMV-182 board.
 
 config MTD_BAST
-	tristate "Map driver for Simtec BAST (EB2410ITX)"
-	depends on ARCH_BAST
+	tristate "Map driver for Simtec BAST (EB2410ITX) or Thorcom VR1000"
+	depends on ARCH_BAST || MACH_VR1000
 	select MTD_PARTITIONS
 	select MTD_MAP_BANK_WIDTH_16
 	select MTD_JEDECPROBE
 	help
-	  Map driver for NOR flash on the Simtec BAST (EB2410ITX).
+	  Map driver for NOR flash on the Simtec BAST (EB2410ITX), or the
+	  Thorcom VR1000
 
 	  Note, this driver *cannot* over-ride the WP link on the
 	  board, or currently detect the state of the link.
@@ -669,5 +614,15 @@ config MTD_SHARP_SL
 	help
 	  This enables access to the flash chip on the Sharp SL Series of PDAs.
 
+config MTD_PLATRAM
+	tristate "Map driver for platform device RAM (mtd-ram)"
+	depends on MTD
+	select MTD_RAM
+	help
+	  Map driver for RAM areas described via the platform device
+	  system.
+
+	  This selection automatically selects the map_ram driver.
+
 endmenu
 
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index 7ffe02b..7bcbc49 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -1,7 +1,7 @@
 #
 # linux/drivers/maps/Makefile
 #
-# $Id: Makefile.common,v 1.23 2005/01/05 17:06:36 dwmw2 Exp $
+# $Id: Makefile.common,v 1.30 2005/07/02 01:53:24 tpoynor Exp $
 
 ifeq ($(CONFIG_MTD_COMPLEX_MAPPINGS),y)
 obj-$(CONFIG_MTD)		+= map_funcs.o
@@ -15,7 +15,6 @@ obj-$(CONFIG_MTD_CFI_FLAGADM)	+= cfi_flagadm.o
 obj-$(CONFIG_MTD_CSTM_MIPS_IXX)	+= cstm_mips_ixx.o
 obj-$(CONFIG_MTD_DC21285)	+= dc21285.o
 obj-$(CONFIG_MTD_DILNETPC)	+= dilnetpc.o
-obj-$(CONFIG_MTD_ELAN_104NC)	+= elan-104nc.o
 obj-$(CONFIG_MTD_EPXA10DB)	+= epxa10db-flash.o
 obj-$(CONFIG_MTD_IQ80310)	+= iq80310.o
 obj-$(CONFIG_MTD_L440GX)	+= l440gx.o
@@ -23,6 +22,7 @@ obj-$(CONFIG_MTD_AMD76XROM)	+= amd76xrom.o
 obj-$(CONFIG_MTD_ICHXROM)	+= ichxrom.o
 obj-$(CONFIG_MTD_TSUNAMI)	+= tsunami_flash.o
 obj-$(CONFIG_MTD_LUBBOCK)	+= lubbock-flash.o
+obj-$(CONFIG_MTD_MAINSTONE)	+= mainstone-flash.o
 obj-$(CONFIG_MTD_MBX860)	+= mbx860.o
 obj-$(CONFIG_MTD_CEIVA)		+= ceiva.o
 obj-$(CONFIG_MTD_OCTAGON)	+= octagon-5066.o
@@ -44,10 +44,7 @@ obj-$(CONFIG_MTD_DBOX2)		+= dbox2-flash.o
 obj-$(CONFIG_MTD_OCELOT)	+= ocelot.o
 obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
 obj-$(CONFIG_MTD_PCI)		+= pci.o
-obj-$(CONFIG_MTD_PB1XXX)	+= pb1xxx-flash.o
-obj-$(CONFIG_MTD_DB1X00)        += db1x00-flash.o
-obj-$(CONFIG_MTD_PB1550)        += pb1550-flash.o
-obj-$(CONFIG_MTD_DB1550)        += db1550-flash.o
+obj-$(CONFIG_MTD_ALCHEMY)       += alchemy-flash.o
 obj-$(CONFIG_MTD_LASAT)		+= lasat.o
 obj-$(CONFIG_MTD_AUTCPU12)	+= autcpu12-nvram.o
 obj-$(CONFIG_MTD_EDB7312)	+= edb7312.o
@@ -71,3 +68,5 @@ obj-$(CONFIG_MTD_IXP2000)	+= ixp2000.o
 obj-$(CONFIG_MTD_WRSBC8260)	+= wr_sbc82xx_flash.o
 obj-$(CONFIG_MTD_DMV182)	+= dmv182.o
 obj-$(CONFIG_MTD_SHARP_SL)	+= sharpsl-flash.o
+obj-$(CONFIG_MTD_PLATRAM)	+= plat-ram.o
+obj-$(CONFIG_MTD_OMAP_NOR)	+= omap_nor.o
diff --git a/drivers/mtd/maps/alchemy-flash.c b/drivers/mtd/maps/alchemy-flash.c
new file mode 100644
index 0000000..27fd2a3
--- /dev/null
+++ b/drivers/mtd/maps/alchemy-flash.c
@@ -0,0 +1,192 @@
+/*
+ * Flash memory access on AMD Alchemy evaluation boards
+ * 
+ * $Id: alchemy-flash.c,v 1.1 2005/02/27 21:50:21 ppopov Exp $
+ *
+ * (C) 2003, 2004 Pete Popov <ppopov@embeddedalley.com>
+ * 
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/io.h>
+
+#ifdef 	DEBUG_RW
+#define	DBG(x...)	printk(x)
+#else
+#define	DBG(x...)	
+#endif
+
+#ifdef CONFIG_MIPS_PB1000
+#define BOARD_MAP_NAME "Pb1000 Flash"
+#define BOARD_FLASH_SIZE 0x00800000 /* 8MB */
+#define BOARD_FLASH_WIDTH 4 /* 32-bits */
+#endif
+
+#ifdef CONFIG_MIPS_PB1500
+#define BOARD_MAP_NAME "Pb1500 Flash"
+#define BOARD_FLASH_SIZE 0x04000000 /* 64MB */
+#define BOARD_FLASH_WIDTH 4 /* 32-bits */
+#endif
+
+#ifdef CONFIG_MIPS_PB1100
+#define BOARD_MAP_NAME "Pb1100 Flash"
+#define BOARD_FLASH_SIZE 0x04000000 /* 64MB */
+#define BOARD_FLASH_WIDTH 4 /* 32-bits */
+#endif
+
+#ifdef CONFIG_MIPS_PB1550
+#define BOARD_MAP_NAME "Pb1550 Flash"
+#define BOARD_FLASH_SIZE 0x08000000 /* 128MB */
+#define BOARD_FLASH_WIDTH 4 /* 32-bits */
+#endif
+
+#ifdef CONFIG_MIPS_PB1200
+#define BOARD_MAP_NAME "Pb1200 Flash"
+#define BOARD_FLASH_SIZE 0x08000000 /* 128MB */
+#define BOARD_FLASH_WIDTH 2 /* 16-bits */
+#endif
+
+#ifdef CONFIG_MIPS_DB1000
+#define BOARD_MAP_NAME "Db1000 Flash"
+#define BOARD_FLASH_SIZE 0x02000000 /* 32MB */
+#define BOARD_FLASH_WIDTH 4 /* 32-bits */
+#endif
+
+#ifdef CONFIG_MIPS_DB1500
+#define BOARD_MAP_NAME "Db1500 Flash"
+#define BOARD_FLASH_SIZE 0x02000000 /* 32MB */
+#define BOARD_FLASH_WIDTH 4 /* 32-bits */
+#endif
+
+#ifdef CONFIG_MIPS_DB1100
+#define BOARD_MAP_NAME "Db1100 Flash"
+#define BOARD_FLASH_SIZE 0x02000000 /* 32MB */
+#define BOARD_FLASH_WIDTH 4 /* 32-bits */
+#endif
+
+#ifdef CONFIG_MIPS_DB1550
+#define BOARD_MAP_NAME "Db1550 Flash"
+#define BOARD_FLASH_SIZE 0x08000000 /* 128MB */
+#define BOARD_FLASH_WIDTH 4 /* 32-bits */
+#endif
+
+#ifdef CONFIG_MIPS_DB1200
+#define BOARD_MAP_NAME "Db1200 Flash"
+#define BOARD_FLASH_SIZE 0x04000000 /* 64MB */
+#define BOARD_FLASH_WIDTH 2 /* 16-bits */
+#endif
+
+#ifdef CONFIG_MIPS_HYDROGEN3
+#define BOARD_MAP_NAME "Hydrogen3 Flash"
+#define BOARD_FLASH_SIZE 0x02000000 /* 32MB */
+#define BOARD_FLASH_WIDTH 4 /* 32-bits */
+#define USE_LOCAL_ACCESSORS /* why? */
+#endif
+
+#ifdef CONFIG_MIPS_BOSPORUS
+#define BOARD_MAP_NAME "Bosporus Flash"
+#define BOARD_FLASH_SIZE 0x01000000 /* 16MB */
+#define BOARD_FLASH_WIDTH 2 /* 16-bits */
+#endif
+
+#ifdef CONFIG_MIPS_MIRAGE
+#define BOARD_MAP_NAME "Mirage Flash"
+#define BOARD_FLASH_SIZE 0x04000000 /* 64MB */
+#define BOARD_FLASH_WIDTH 4 /* 32-bits */
+#define USE_LOCAL_ACCESSORS /* why? */
+#endif
+
+static struct map_info alchemy_map = {
+	.name =	BOARD_MAP_NAME,
+};
+
+static struct mtd_partition alchemy_partitions[] = {
+        {
+                .name = "User FS",
+                .size = BOARD_FLASH_SIZE - 0x00400000,
+                .offset = 0x0000000
+        },{
+                .name = "YAMON",
+                .size = 0x0100000,
+		.offset = MTDPART_OFS_APPEND,
+                .mask_flags = MTD_WRITEABLE
+        },{
+                .name = "raw kernel",
+		.size = (0x300000 - 0x40000), /* last 256KB is yamon env */
+		.offset = MTDPART_OFS_APPEND,
+        }
+};
+
+#define NB_OF(x)  (sizeof(x)/sizeof(x[0]))
+
+static struct mtd_info *mymtd;
+
+int __init alchemy_mtd_init(void)
+{
+	struct mtd_partition *parts;
+	int nb_parts = 0;
+	unsigned long window_addr;
+	unsigned long window_size;
+	
+	/* Default flash buswidth */
+	alchemy_map.bankwidth = BOARD_FLASH_WIDTH;
+
+	window_addr = 0x20000000 - BOARD_FLASH_SIZE;
+	window_size = BOARD_FLASH_SIZE;
+#ifdef CONFIG_MIPS_MIRAGE_WHY
+	/* Boot ROM flash bank only; no user bank */
+	window_addr = 0x1C000000;
+	window_size = 0x04000000;
+	/* USERFS from 0x1C00 0000 to 0x1FC00000 */
+	alchemy_partitions[0].size = 0x03C00000;
+#endif
+
+	/*
+	 * Static partition definition selection
+	 */
+	parts = alchemy_partitions;
+	nb_parts = NB_OF(alchemy_partitions);
+	alchemy_map.size = window_size;
+
+	/*
+	 * Now let's probe for the actual flash.  Do it here since
+	 * specific machine settings might have been set above.
+	 */
+	printk(KERN_NOTICE BOARD_MAP_NAME ": probing %d-bit flash bus\n", 
+			alchemy_map.bankwidth*8);
+	alchemy_map.virt = ioremap(window_addr, window_size);
+	mymtd = do_map_probe("cfi_probe", &alchemy_map);
+	if (!mymtd) {
+		iounmap(alchemy_map.virt);
+		return -ENXIO;
+	}
+	mymtd->owner = THIS_MODULE;
+
+	add_mtd_partitions(mymtd, parts, nb_parts);
+	return 0;
+}
+
+static void __exit alchemy_mtd_cleanup(void)
+{
+	if (mymtd) {
+		del_mtd_partitions(mymtd);
+		map_destroy(mymtd);
+		iounmap(alchemy_map.virt);
+	}
+}
+
+module_init(alchemy_mtd_init);
+module_exit(alchemy_mtd_cleanup);
+
+MODULE_AUTHOR("Embedded Alley Solutions, Inc");
+MODULE_DESCRIPTION(BOARD_MAP_NAME " MTD driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/maps/amd76xrom.c b/drivers/mtd/maps/amd76xrom.c
index 51e97b0..e8a900a 100644
--- a/drivers/mtd/maps/amd76xrom.c
+++ b/drivers/mtd/maps/amd76xrom.c
@@ -2,7 +2,7 @@
  * amd76xrom.c
  *
  * Normal mappings of chips in physical memory
- * $Id: amd76xrom.c,v 1.19 2004/11/28 09:40:39 dwmw2 Exp $
+ * $Id: amd76xrom.c,v 1.20 2005/03/18 14:04:35 gleixner Exp $
  */
 
 #include <linux/module.h>
@@ -314,7 +314,7 @@ static int __init init_amd76xrom(void)
 	}
 	return -ENXIO;
 #if 0
-	return pci_module_init(&amd76xrom_driver);
+	return pci_register_driver(&amd76xrom_driver);
 #endif
 }
 
diff --git a/drivers/mtd/maps/bast-flash.c b/drivers/mtd/maps/bast-flash.c
index 44de3a8..0c45464 100644
--- a/drivers/mtd/maps/bast-flash.c
+++ b/drivers/mtd/maps/bast-flash.c
@@ -1,14 +1,15 @@
 /* linux/drivers/mtd/maps/bast_flash.c
  *
- * Copyright (c) 2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
+ * Copyright (c) 2004-2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
  *
  * Simtec Bast (EB2410ITX) NOR MTD Mapping driver
  *
  * Changelog:
  *	20-Sep-2004  BJD  Initial version
+ *	17-Jan-2005  BJD  Add whole device if no partitions found
  *
- * $Id: bast-flash.c,v 1.1 2004/09/21 14:29:04 bjd Exp $
+ * $Id: bast-flash.c,v 1.2 2005/01/18 11:13:47 bjd Exp $
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -46,9 +47,9 @@
 #include <asm/arch/bast-cpld.h>
 
 #ifdef CONFIG_MTD_BAST_MAXSIZE
-#define AREA_MAXSIZE (CONFIG_MTD_BAST_MAXSIZE * (1024*1024))
+#define AREA_MAXSIZE (CONFIG_MTD_BAST_MAXSIZE * SZ_1M)
 #else
-#define AREA_MAXSIZE (32*1024*1024)
+#define AREA_MAXSIZE (32 * SZ_1M)
 #endif
 
 #define PFX "bast-flash: "
@@ -189,6 +190,8 @@ static int bast_flash_probe(struct device *dev)
 		err = add_mtd_partitions(info->mtd, info->partitions, err);
 		if (err) 
 			printk(KERN_ERR PFX "cannot add/parse partitions\n");
+	} else {
+		err = add_mtd_device(info->mtd);
 	}
 
 	if (err == 0)
diff --git a/drivers/mtd/maps/db1550-flash.c b/drivers/mtd/maps/db1550-flash.c
deleted file mode 100644
index d213888..0000000
--- a/drivers/mtd/maps/db1550-flash.c
+++ /dev/null
@@ -1,187 +0,0 @@
-/*
- * Flash memory access on Alchemy Db1550 board
- * 
- * $Id: db1550-flash.c,v 1.7 2004/11/04 13:24:14 gleixner Exp $
- *
- * (C) 2004 Embedded Edge, LLC, based on db1550-flash.c:
- * (C) 2003, 2004 Pete Popov <ppopov@embeddedalley.com>
- * 
- */
-
-#include <linux/config.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/io.h>
-
-#ifdef 	DEBUG_RW
-#define	DBG(x...)	printk(x)
-#else
-#define	DBG(x...)	
-#endif
-
-static unsigned long window_addr;
-static unsigned long window_size;
-
-
-static struct map_info db1550_map = {
-	.name =	"Db1550 flash",
-};
-
-static unsigned char flash_bankwidth = 4;
-
-/* 
- * Support only 64MB NOR Flash parts
- */
-
-#if defined(CONFIG_MTD_DB1550_BOOT) && defined(CONFIG_MTD_DB1550_USER)
-#define DB1550_BOTH_BANKS
-#elif defined(CONFIG_MTD_DB1550_BOOT) && !defined(CONFIG_MTD_DB1550_USER)
-#define DB1550_BOOT_ONLY
-#elif !defined(CONFIG_MTD_DB1550_BOOT) && defined(CONFIG_MTD_DB1550_USER)
-#define DB1550_USER_ONLY
-#endif
-
-#ifdef DB1550_BOTH_BANKS
-/* both banks will be used. Combine the first bank and the first 
- * part of the second bank together into a single jffs/jffs2
- * partition.
- */
-static struct mtd_partition db1550_partitions[] = {
-	/* assume boot[2:0]:swap is '0000' or '1000', which translates to:
-	 * 1C00 0000 1FFF FFFF CE0 64MB Boot NOR Flash
-	 * 1800 0000 1BFF FFFF CE0 64MB Param NOR Flash
-	 */
-        {
-                .name = "User FS",
-                .size =   (0x1FC00000 - 0x18000000),
-                .offset = 0x0000000
-        },{
-                .name = "yamon",
-                .size = 0x0100000,
-		.offset = MTDPART_OFS_APPEND,
-                .mask_flags = MTD_WRITEABLE
-        },{
-                .name = "raw kernel",
-		.size = (0x300000 - 0x40000), /* last 256KB is yamon env */
-		.offset = MTDPART_OFS_APPEND,
-        }
-};
-#elif defined(DB1550_BOOT_ONLY)
-static struct mtd_partition db1550_partitions[] = {
-	/* assume boot[2:0]:swap is '0000' or '1000', which translates to:
-	 * 1C00 0000 1FFF FFFF CE0 64MB Boot NOR Flash
-	 */
-        {
-                .name = "User FS",
-                .size =   0x03c00000,
-                .offset = 0x0000000
-        },{
-                .name = "yamon",
-                .size = 0x0100000,
-		.offset = MTDPART_OFS_APPEND,
-                .mask_flags = MTD_WRITEABLE
-        },{
-                .name = "raw kernel",
-		.size = (0x300000-0x40000), /* last 256KB is yamon env */
-		.offset = MTDPART_OFS_APPEND,
-        }
-};
-#elif defined(DB1550_USER_ONLY)
-static struct mtd_partition db1550_partitions[] = {
-	/* assume boot[2:0]:swap is '0000' or '1000', which translates to:
-	 * 1800 0000 1BFF FFFF CE0 64MB Param NOR Flash
-	 */
-        {
-                .name = "User FS",
-                .size = (0x4000000 - 0x200000), /* reserve 2MB for raw kernel */
-                .offset = 0x0000000
-        },{
-                .name = "raw kernel",
-		.size = MTDPART_SIZ_FULL,
-		.offset = MTDPART_OFS_APPEND,
-        }
-};
-#else
-#error MTD_DB1550 define combo error /* should never happen */
-#endif
-
-#define NB_OF(x)  (sizeof(x)/sizeof(x[0]))
-
-static struct mtd_info *mymtd;
-
-/*
- * Probe the flash density and setup window address and size
- * based on user CONFIG options. There are times when we don't
- * want the MTD driver to be probing the boot or user flash,
- * so having the option to enable only one bank is important.
- */
-int setup_flash_params(void)
-{
-#if defined(DB1550_BOTH_BANKS)
-			window_addr = 0x18000000;
-			window_size = 0x8000000; 
-#elif defined(DB1550_BOOT_ONLY)
-			window_addr = 0x1C000000;
-			window_size = 0x4000000; 
-#else /* USER ONLY */
-			window_addr = 0x18000000;
-			window_size = 0x4000000; 
-#endif
-	return 0;
-}
-
-int __init db1550_mtd_init(void)
-{
-	struct mtd_partition *parts;
-	int nb_parts = 0;
-	
-	/* Default flash bankwidth */
-	db1550_map.bankwidth = flash_bankwidth;
-
-	if (setup_flash_params()) 
-		return -ENXIO;
-
-	/*
-	 * Static partition definition selection
-	 */
-	parts = db1550_partitions;
-	nb_parts = NB_OF(db1550_partitions);
-	db1550_map.size = window_size;
-
-	/*
-	 * Now let's probe for the actual flash.  Do it here since
-	 * specific machine settings might have been set above.
-	 */
-	printk(KERN_NOTICE "Db1550 flash: probing %d-bit flash bus\n", 
-			db1550_map.bankwidth*8);
-	db1550_map.virt = ioremap(window_addr, window_size);
-	mymtd = do_map_probe("cfi_probe", &db1550_map);
-	if (!mymtd) return -ENXIO;
-	mymtd->owner = THIS_MODULE;
-
-	add_mtd_partitions(mymtd, parts, nb_parts);
-	return 0;
-}
-
-static void __exit db1550_mtd_cleanup(void)
-{
-	if (mymtd) {
-		del_mtd_partitions(mymtd);
-		map_destroy(mymtd);
-		iounmap((void *) db1550_map.virt);
-	}
-}
-
-module_init(db1550_mtd_init);
-module_exit(db1550_mtd_cleanup);
-
-MODULE_AUTHOR("Embedded Edge, LLC");
-MODULE_DESCRIPTION("Db1550 mtd map driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/maps/db1x00-flash.c b/drivers/mtd/maps/db1x00-flash.c
deleted file mode 100644
index faa68ec..0000000
--- a/drivers/mtd/maps/db1x00-flash.c
+++ /dev/null
@@ -1,226 +0,0 @@
-/*
- * Flash memory access on Alchemy Db1xxx boards
- * 
- * $Id: db1x00-flash.c,v 1.6 2004/11/04 13:24:14 gleixner Exp $
- *
- * (C) 2003 Pete Popov <ppopov@embeddedalley.com>
- * 
- */
-
-#include <linux/config.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/io.h>
-
-#ifdef 	DEBUG_RW
-#define	DBG(x...)	printk(x)
-#else
-#define	DBG(x...)	
-#endif
-
-/* MTD CONFIG OPTIONS */
-#if defined(CONFIG_MTD_DB1X00_BOOT) && defined(CONFIG_MTD_DB1X00_USER)
-#define DB1X00_BOTH_BANKS
-#elif defined(CONFIG_MTD_DB1X00_BOOT) && !defined(CONFIG_MTD_DB1X00_USER)
-#define DB1X00_BOOT_ONLY
-#elif !defined(CONFIG_MTD_DB1X00_BOOT) && defined(CONFIG_MTD_DB1X00_USER)
-#define DB1X00_USER_ONLY
-#endif
-
-static unsigned long window_addr;
-static unsigned long window_size;
-static unsigned long flash_size;
-
-static unsigned short *bcsr = (unsigned short *)0xAE000000;
-static unsigned char flash_bankwidth = 4;
-
-/* 
- * The Db1x boards support different flash densities. We setup
- * the mtd_partition structures below for default of 64Mbit 
- * flash densities, and override the partitions sizes, if
- * necessary, after we check the board status register.
- */
-
-#ifdef DB1X00_BOTH_BANKS
-/* both banks will be used. Combine the first bank and the first 
- * part of the second bank together into a single jffs/jffs2
- * partition.
- */
-static struct mtd_partition db1x00_partitions[] = {
-        {
-                .name         =  "User FS",
-                .size         =  0x1c00000,
-                .offset       =  0x0000000
-        },{
-                .name         =  "yamon",
-                .size         =  0x0100000,
-		.offset       =  MTDPART_OFS_APPEND,
-                .mask_flags   =  MTD_WRITEABLE
-        },{
-                .name         =  "raw kernel",
-		.size         =  (0x300000-0x40000), /* last 256KB is env */
-		.offset       =  MTDPART_OFS_APPEND,
-        }
-};
-#elif defined(DB1X00_BOOT_ONLY)
-static struct mtd_partition db1x00_partitions[] = {
-        {
-                .name         =  "User FS",
-                .size         =  0x00c00000,
-                .offset       =  0x0000000
-        },{
-                .name         =  "yamon",
-                .size         =  0x0100000,
-		.offset       =  MTDPART_OFS_APPEND,
-                .mask_flags   =  MTD_WRITEABLE
-        },{
-                .name         =  "raw kernel",
-		.size         =  (0x300000-0x40000), /* last 256KB is env */
-		.offset       =  MTDPART_OFS_APPEND,
-        }
-};
-#elif defined(DB1X00_USER_ONLY)
-static struct mtd_partition db1x00_partitions[] = {
-        {
-                .name         =  "User FS",
-                .size         =  0x0e00000,
-                .offset       =  0x0000000
-        },{
-                .name         =  "raw kernel",
-		.size         =  MTDPART_SIZ_FULL,
-		.offset       =  MTDPART_OFS_APPEND,
-        }
-};
-#else
-#error MTD_DB1X00 define combo error /* should never happen */
-#endif
-#define NB_OF(x)  (sizeof(x)/sizeof(x[0]))
-
-#define NAME     	"Db1x00 Linux Flash"
-
-static struct map_info db1xxx_mtd_map = {
-	.name		= NAME,
-};
-
-static struct mtd_partition *parsed_parts;
-static struct mtd_info *db1xxx_mtd;
-
-/*
- * Probe the flash density and setup window address and size
- * based on user CONFIG options. There are times when we don't
- * want the MTD driver to be probing the boot or user flash,
- * so having the option to enable only one bank is important.
- */
-int setup_flash_params(void)
-{
-	switch ((bcsr[2] >> 14) & 0x3) {
-		case 0: /* 64Mbit devices */
-			flash_size = 0x800000; /* 8MB per part */
-#if defined(DB1X00_BOTH_BANKS)
-			window_addr = 0x1E000000;
-			window_size = 0x2000000; 
-#elif defined(DB1X00_BOOT_ONLY)
-			window_addr = 0x1F000000;
-			window_size = 0x1000000; 
-#else /* USER ONLY */
-			window_addr = 0x1E000000;
-			window_size = 0x1000000; 
-#endif
-			break;
-		case 1:
-			/* 128 Mbit devices */
-			flash_size = 0x1000000; /* 16MB per part */
-#if defined(DB1X00_BOTH_BANKS)
-			window_addr = 0x1C000000;
-			window_size = 0x4000000;
-			/* USERFS from 0x1C00 0000 to 0x1FC0 0000 */
-			db1x00_partitions[0].size = 0x3C00000;
-#elif defined(DB1X00_BOOT_ONLY)
-			window_addr = 0x1E000000;
-			window_size = 0x2000000;
-			/* USERFS from 0x1E00 0000 to 0x1FC0 0000 */
-			db1x00_partitions[0].size = 0x1C00000;
-#else /* USER ONLY */
-			window_addr = 0x1C000000;
-			window_size = 0x2000000;
-			/* USERFS from 0x1C00 0000 to 0x1DE00000 */
-			db1x00_partitions[0].size = 0x1DE0000;
-#endif
-			break;
-		case 2:
-			/* 256 Mbit devices */
-			flash_size = 0x4000000; /* 64MB per part */
-#if defined(DB1X00_BOTH_BANKS)
-			return 1;
-#elif defined(DB1X00_BOOT_ONLY)
-			/* Boot ROM flash bank only; no user bank */
-			window_addr = 0x1C000000;
-			window_size = 0x4000000;
-			/* USERFS from 0x1C00 0000 to 0x1FC00000 */
-			db1x00_partitions[0].size = 0x3C00000;
-#else /* USER ONLY */
-			return 1;
-#endif
-			break;
-		default:
-			return 1;
-	}
-	db1xxx_mtd_map.size = window_size;
-	db1xxx_mtd_map.bankwidth = flash_bankwidth;
-	db1xxx_mtd_map.phys = window_addr;
-	db1xxx_mtd_map.bankwidth = flash_bankwidth;
-	return 0;
-}
-
-int __init db1x00_mtd_init(void)
-{
-	struct mtd_partition *parts;
-	int nb_parts = 0;
-	
-	if (setup_flash_params()) 
-		return -ENXIO;
-
-	/*
-	 * Static partition definition selection
-	 */
-	parts = db1x00_partitions;
-	nb_parts = NB_OF(db1x00_partitions);
-
-	/*
-	 * Now let's probe for the actual flash.  Do it here since
-	 * specific machine settings might have been set above.
-	 */
-	printk(KERN_NOTICE "Db1xxx flash: probing %d-bit flash bus\n", 
-			db1xxx_mtd_map.bankwidth*8);
-	db1xxx_mtd_map.virt = ioremap(window_addr, window_size);
-	db1xxx_mtd = do_map_probe("cfi_probe", &db1xxx_mtd_map);
-	if (!db1xxx_mtd) return -ENXIO;
-	db1xxx_mtd->owner = THIS_MODULE;
-
-	add_mtd_partitions(db1xxx_mtd, parts, nb_parts);
-	return 0;
-}
-
-static void __exit db1x00_mtd_cleanup(void)
-{
-	if (db1xxx_mtd) {
-		del_mtd_partitions(db1xxx_mtd);
-		map_destroy(db1xxx_mtd);
-		if (parsed_parts)
-			kfree(parsed_parts);
-	}
-}
-
-module_init(db1x00_mtd_init);
-module_exit(db1x00_mtd_cleanup);
-
-MODULE_AUTHOR("Pete Popov");
-MODULE_DESCRIPTION("Db1x00 mtd map driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/maps/elan-104nc.c b/drivers/mtd/maps/elan-104nc.c
deleted file mode 100644
index e9465f5..0000000
--- a/drivers/mtd/maps/elan-104nc.c
+++ /dev/null
@@ -1,228 +0,0 @@
-/* elan-104nc.c -- MTD map driver for Arcom Control Systems ELAN-104NC
- 
-   Copyright (C) 2000 Arcom Control System Ltd
- 
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2 of the License, or
-   (at your option) any later version.
- 
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
- 
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
-
-   $Id: elan-104nc.c,v 1.25 2004/11/28 09:40:39 dwmw2 Exp $
-
-The ELAN-104NC has up to 8 Mibyte of Intel StrataFlash (28F320/28F640) in x16
-mode.  This drivers uses the CFI probe and Intel Extended Command Set drivers.
-
-The flash is accessed as follows:
-
-   32 kbyte memory window at 0xb0000-0xb7fff
-   
-   16 bit I/O port (0x22) for some sort of paging.
-
-The single flash device is divided into 3 partition which appear as separate
-MTD devices.
-
-Linux thinks that the I/O port is used by the PIC and hence check_region() will
-always fail.  So we don't do it.  I just hope it doesn't break anything.
-*/
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <asm/io.h>
-
-#include <linux/mtd/map.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#define WINDOW_START 0xb0000
-/* Number of bits in offset. */
-#define WINDOW_SHIFT 15
-#define WINDOW_LENGTH (1 << WINDOW_SHIFT)
-/* The bits for the offset into the window. */
-#define WINDOW_MASK (WINDOW_LENGTH-1)
-#define PAGE_IO 0x22
-#define PAGE_IO_SIZE 2
-
-static volatile int page_in_window = -1; // Current page in window.
-static void __iomem *iomapadr;
-static DEFINE_SPINLOCK(elan_104nc_spin);
-
-/* partition_info gives details on the logical partitions that the split the 
- * single flash device into. If the size if zero we use up to the end of the
- * device. */
-static struct mtd_partition partition_info[]={
-    { .name = "ELAN-104NC flash boot partition", 
-      .offset = 0, 
-      .size = 640*1024 },
-    { .name = "ELAN-104NC flash partition 1", 
-      .offset = 640*1024, 
-      .size = 896*1024 },
-    { .name = "ELAN-104NC flash partition 2", 
-      .offset = (640+896)*1024 }
-};
-#define NUM_PARTITIONS (sizeof(partition_info)/sizeof(partition_info[0]))
-
-/*
- * If no idea what is going on here.  This is taken from the FlashFX stuff.
- */
-#define ROMCS 1
-
-static inline void elan_104nc_setup(void)
-{
-    u16 t;
-
-    outw( 0x0023 + ROMCS*2, PAGE_IO );
-    t=inb( PAGE_IO+1 );
-
-    t=(t & 0xf9) | 0x04;
-
-    outw( ((0x0023 + ROMCS*2) | (t << 8)), PAGE_IO );
-}
-
-static inline void elan_104nc_page(struct map_info *map, unsigned long ofs)
-{
-	unsigned long page = ofs >> WINDOW_SHIFT;
-       
-	if( page!=page_in_window ) {
-		int cmd1;
-		int cmd2;
-
-		cmd1=(page & 0x700) + 0x0833 + ROMCS*0x4000;
-		cmd2=((page & 0xff) << 8) + 0x0032;
-
-		outw( cmd1, PAGE_IO );
-		outw( cmd2, PAGE_IO );
-
-		page_in_window = page;
-	}
-}
-
-
-static map_word elan_104nc_read16(struct map_info *map, unsigned long ofs)
-{
-	map_word ret;
-	spin_lock(&elan_104nc_spin);
-	elan_104nc_page(map, ofs);
-	ret.x[0] = readw(iomapadr + (ofs & WINDOW_MASK));
-	spin_unlock(&elan_104nc_spin);
-	return ret;
-}
-
-static void elan_104nc_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
-{
-	while (len) {
-		unsigned long thislen = len;
-		if (len > (WINDOW_LENGTH - (from & WINDOW_MASK)))
-			thislen = WINDOW_LENGTH-(from & WINDOW_MASK);
-		
-		spin_lock(&elan_104nc_spin);
-		elan_104nc_page(map, from);
-		memcpy_fromio(to, iomapadr + (from & WINDOW_MASK), thislen);
-		spin_unlock(&elan_104nc_spin);
-		to += thislen;
-		from += thislen;
-		len -= thislen;
-	}
-}
-
-static void elan_104nc_write16(struct map_info *map, map_word d, unsigned long adr)
-{
-	spin_lock(&elan_104nc_spin);
-	elan_104nc_page(map, adr);
-	writew(d.x[0], iomapadr + (adr & WINDOW_MASK));
-	spin_unlock(&elan_104nc_spin);
-}
-
-static void elan_104nc_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
-{	
-	while(len) {
-		unsigned long thislen = len;
-		if (len > (WINDOW_LENGTH - (to & WINDOW_MASK)))
-			thislen = WINDOW_LENGTH-(to & WINDOW_MASK);
-		
-		spin_lock(&elan_104nc_spin);
-		elan_104nc_page(map, to);
-		memcpy_toio(iomapadr + (to & WINDOW_MASK), from, thislen);
-		spin_unlock(&elan_104nc_spin);
-		to += thislen;
-		from += thislen;
-		len -= thislen;
-	}
-}
-
-static struct map_info elan_104nc_map = {
-	.name = "ELAN-104NC flash",
-	.phys = NO_XIP,
-	.size = 8*1024*1024, /* this must be set to a maximum possible amount
-			of flash so the cfi probe routines find all
-			the chips */
-	.bankwidth = 2,
-	.read = elan_104nc_read16,
-	.copy_from = elan_104nc_copy_from,
-	.write = elan_104nc_write16,
-	.copy_to = elan_104nc_copy_to
-};
-
-/* MTD device for all of the flash. */
-static struct mtd_info *all_mtd;
-
-static void cleanup_elan_104nc(void)
-{
-	if( all_mtd ) {
-		del_mtd_partitions( all_mtd );
-		map_destroy( all_mtd );
-	}
-
-	iounmap(iomapadr);
-}
-
-static int __init init_elan_104nc(void)
-{
-	/* Urg! We use I/O port 0x22 without request_region()ing it,
-	   because it's already allocated to the PIC. */
-
-  	iomapadr = ioremap(WINDOW_START, WINDOW_LENGTH);
-	if (!iomapadr) {
-		printk( KERN_ERR"%s: failed to ioremap memory region\n",
-			elan_104nc_map.name );
-		return -EIO;
-	}
-
-	printk( KERN_INFO"%s: IO:0x%x-0x%x MEM:0x%x-0x%x\n",
-		elan_104nc_map.name,
-		PAGE_IO, PAGE_IO+PAGE_IO_SIZE-1,
-		WINDOW_START, WINDOW_START+WINDOW_LENGTH-1 );
-
-	elan_104nc_setup();
-
-	/* Probe for chip. */
-	all_mtd = do_map_probe("cfi_probe",  &elan_104nc_map );
-	if( !all_mtd ) {
-		cleanup_elan_104nc();
-		return -ENXIO;
-	}
-	
-	all_mtd->owner = THIS_MODULE;
-
-	/* Create MTD devices for each partition. */
-	add_mtd_partitions( all_mtd, partition_info, NUM_PARTITIONS );
-
-	return 0;
-}
-
-module_init(init_elan_104nc);
-module_exit(cleanup_elan_104nc);
-
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Arcom Control Systems Ltd.");
-MODULE_DESCRIPTION("MTD map driver for Arcom Control Systems ELAN-104NC");
diff --git a/drivers/mtd/maps/ichxrom.c b/drivers/mtd/maps/ichxrom.c
index 29d1cc1..e505207 100644
--- a/drivers/mtd/maps/ichxrom.c
+++ b/drivers/mtd/maps/ichxrom.c
@@ -2,7 +2,7 @@
  * ichxrom.c
  *
  * Normal mappings of chips in physical memory
- * $Id: ichxrom.c,v 1.16 2004/11/28 09:40:39 dwmw2 Exp $
+ * $Id: ichxrom.c,v 1.18 2005/07/07 10:26:20 dwmw2 Exp $
  */
 
 #include <linux/module.h>
@@ -338,9 +338,9 @@ static struct pci_device_id ichxrom_pci_tbl[] __devinitdata = {
 	{ 0, },
 };
 
+#if 0
 MODULE_DEVICE_TABLE(pci, ichxrom_pci_tbl);
 
-#if 0
 static struct pci_driver ichxrom_driver = {
 	.name =		MOD_NAME,
 	.id_table =	ichxrom_pci_tbl,
@@ -366,7 +366,7 @@ static int __init init_ichxrom(void)
 	}
 	return -ENXIO;
 #if 0
-	return pci_module_init(&ichxrom_driver);
+	return pci_register_driver(&ichxrom_driver);
 #endif
 }
 
diff --git a/drivers/mtd/maps/ixp2000.c b/drivers/mtd/maps/ixp2000.c
index c5b5f44..3e94b61 100644
--- a/drivers/mtd/maps/ixp2000.c
+++ b/drivers/mtd/maps/ixp2000.c
@@ -1,5 +1,5 @@
 /*
- * $Id: ixp2000.c,v 1.5 2004/11/16 17:15:48 dsaxena Exp $
+ * $Id: ixp2000.c,v 1.6 2005/03/18 14:07:46 gleixner Exp $
  *
  * drivers/mtd/maps/ixp2000.c
  *
@@ -216,11 +216,6 @@ static int ixp2000_flash_probe(struct device *_dev)
 		goto Error;
 	}
 
-	/*
-	 * Setup read mode for FLASH
-	 */
-	*IXP2000_SLOWPORT_FRM = 1;
-
 #if defined(__ARMEB__)
 	/*
 	 * Enable erratum 44 workaround for NPUs with broken slowport
diff --git a/drivers/mtd/maps/mainstone-flash.c b/drivers/mtd/maps/mainstone-flash.c
new file mode 100644
index 0000000..87e93fa
--- /dev/null
+++ b/drivers/mtd/maps/mainstone-flash.c
@@ -0,0 +1,178 @@
+/*
+ * $Id:  $
+ *
+ * Map driver for the Mainstone developer platform.
+ *
+ * Author:	Nicolas Pitre
+ * Copyright:	(C) 2001 MontaVista Software Inc.
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/mainstone.h>
+
+
+#define ROM_ADDR	0x00000000
+#define FLASH_ADDR	0x04000000
+
+#define WINDOW_SIZE 	0x04000000
+
+static void mainstone_map_inval_cache(struct map_info *map, unsigned long from,
+				      ssize_t len)
+{
+	consistent_sync((char *)map->cached + from, len, DMA_FROM_DEVICE);
+}
+
+static struct map_info mainstone_maps[2] = { {
+	.size =		WINDOW_SIZE,
+	.phys =		PXA_CS0_PHYS,
+	.inval_cache = 	mainstone_map_inval_cache,
+}, {
+	.size =		WINDOW_SIZE,
+	.phys =		PXA_CS1_PHYS,
+	.inval_cache = 	mainstone_map_inval_cache,
+} };
+
+static struct mtd_partition mainstone_partitions[] = {
+	{
+		.name =		"Bootloader",
+		.size =		0x00040000,
+		.offset =	0,
+		.mask_flags =	MTD_WRITEABLE  /* force read-only */
+	},{
+		.name =		"Kernel",
+		.size =		0x00400000,
+		.offset =	0x00040000,
+	},{
+		.name =		"Filesystem",
+		.size =		MTDPART_SIZ_FULL,
+		.offset =	0x00440000
+	}
+};
+
+static struct mtd_info *mymtds[2];
+static struct mtd_partition *parsed_parts[2];
+static int nr_parsed_parts[2];
+
+static const char *probes[] = { "RedBoot", "cmdlinepart", NULL };
+
+static int __init init_mainstone(void)
+{
+	int SW7 = 0;  /* FIXME: get from SCR (Mst doc section 3.2.1.1) */
+	int ret = 0, i;
+
+	mainstone_maps[0].bankwidth = (BOOT_DEF & 1) ? 2 : 4;
+	mainstone_maps[1].bankwidth = 4;
+
+	/* Compensate for SW7 which swaps the flash banks */
+	mainstone_maps[SW7].name = "processor flash";
+	mainstone_maps[SW7 ^ 1].name = "main board flash";
+
+	printk(KERN_NOTICE "Mainstone configured to boot from %s\n",
+	       mainstone_maps[0].name);
+
+	for (i = 0; i < 2; i++) {
+		mainstone_maps[i].virt = ioremap(mainstone_maps[i].phys,
+						 WINDOW_SIZE);
+		if (!mainstone_maps[i].virt) {
+			printk(KERN_WARNING "Failed to ioremap %s\n", 
+			       mainstone_maps[i].name);
+			if (!ret)
+				ret = -ENOMEM;
+			continue;
+		}
+		mainstone_maps[i].cached = 
+			ioremap_cached(mainstone_maps[i].phys, WINDOW_SIZE);
+		if (!mainstone_maps[i].cached)
+			printk(KERN_WARNING "Failed to ioremap cached %s\n",
+			       mainstone_maps[i].name);
+		simple_map_init(&mainstone_maps[i]);
+
+		printk(KERN_NOTICE 
+		       "Probing %s at physical address 0x%08lx"
+		       " (%d-bit bankwidth)\n",
+		       mainstone_maps[i].name, mainstone_maps[i].phys, 
+		       mainstone_maps[i].bankwidth * 8);
+
+		mymtds[i] = do_map_probe("cfi_probe", &mainstone_maps[i]);
+		
+		if (!mymtds[i]) {
+			iounmap((void *)mainstone_maps[i].virt);
+			if (mainstone_maps[i].cached)
+				iounmap(mainstone_maps[i].cached);
+			if (!ret)
+				ret = -EIO;
+			continue;
+		}
+		mymtds[i]->owner = THIS_MODULE;
+
+		ret = parse_mtd_partitions(mymtds[i], probes,
+					   &parsed_parts[i], 0);
+
+		if (ret > 0)
+			nr_parsed_parts[i] = ret;
+	}
+
+	if (!mymtds[0] && !mymtds[1])
+		return ret;
+	
+	for (i = 0; i < 2; i++) {
+		if (!mymtds[i]) {
+			printk(KERN_WARNING "%s is absent. Skipping\n", 
+			       mainstone_maps[i].name);
+		} else if (nr_parsed_parts[i]) {
+			add_mtd_partitions(mymtds[i], parsed_parts[i], 
+					   nr_parsed_parts[i]);
+		} else if (!i) {
+			printk("Using static partitions on %s\n",
+			       mainstone_maps[i].name);
+			add_mtd_partitions(mymtds[i], mainstone_partitions, 
+					   ARRAY_SIZE(mainstone_partitions));
+		} else {
+			printk("Registering %s as whole device\n", 
+			       mainstone_maps[i].name);
+			add_mtd_device(mymtds[i]);
+		}
+	}
+	return 0;
+}
+
+static void __exit cleanup_mainstone(void)
+{
+	int i;
+	for (i = 0; i < 2; i++) {
+		if (!mymtds[i])
+			continue;
+
+		if (nr_parsed_parts[i] || !i)
+			del_mtd_partitions(mymtds[i]);
+		else
+			del_mtd_device(mymtds[i]);
+
+		map_destroy(mymtds[i]);
+		iounmap((void *)mainstone_maps[i].virt);
+		if (mainstone_maps[i].cached)
+			iounmap(mainstone_maps[i].cached);
+		kfree(parsed_parts[i]);
+	}
+}
+
+module_init(init_mainstone);
+module_exit(cleanup_mainstone);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Nicolas Pitre <nico@cam.org>");
+MODULE_DESCRIPTION("MTD map driver for Intel Mainstone");
diff --git a/drivers/mtd/maps/map_funcs.c b/drivers/mtd/maps/map_funcs.c
index 38f6a7a..9105e6c 100644
--- a/drivers/mtd/maps/map_funcs.c
+++ b/drivers/mtd/maps/map_funcs.c
@@ -1,5 +1,5 @@
 /*
- * $Id: map_funcs.c,v 1.9 2004/07/13 22:33:15 dwmw2 Exp $
+ * $Id: map_funcs.c,v 1.10 2005/06/06 23:04:36 tpoynor Exp $
  *
  * Out-of-line map I/O functions for simple maps when CONFIG_COMPLEX_MAPPINGS
  * is enabled.
@@ -9,23 +9,24 @@
 #include <linux/module.h>
 
 #include <linux/mtd/map.h>
+#include <linux/mtd/xip.h>
 
-static map_word simple_map_read(struct map_info *map, unsigned long ofs)
+static map_word __xipram simple_map_read(struct map_info *map, unsigned long ofs)
 {
 	return inline_map_read(map, ofs);
 }
 
-static void simple_map_write(struct map_info *map, const map_word datum, unsigned long ofs)
+static void __xipram simple_map_write(struct map_info *map, const map_word datum, unsigned long ofs)
 {
 	inline_map_write(map, datum, ofs);
 }
 
-static void simple_map_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
+static void __xipram simple_map_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
 {
 	inline_map_copy_from(map, to, from, len);
 }
 
-static void simple_map_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
+static void __xipram simple_map_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
 {
 	inline_map_copy_to(map, to, from, len);
 }
diff --git a/drivers/mtd/maps/omap_nor.c b/drivers/mtd/maps/omap_nor.c
new file mode 100644
index 0000000..8cc7140
--- /dev/null
+++ b/drivers/mtd/maps/omap_nor.c
@@ -0,0 +1,179 @@
+/*
+ * Flash memory support for various TI OMAP boards
+ *
+ * Copyright (C) 2001-2002 MontaVista Software Inc.
+ * Copyright (C) 2003-2004 Texas Instruments
+ * Copyright (C) 2004 Nokia Corporation 
+ *
+ *	Assembled using driver code copyright the companies above
+ *	and written by David Brownell, Jian Zhang <jzhang@ti.com>,
+ * 	Tony Lindgren <tony@atomide.com> and others.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/flash.h>
+#include <asm/arch/tc.h>
+
+#ifdef CONFIG_MTD_PARTITIONS
+static const char *part_probes[] = { /* "RedBoot", */ "cmdlinepart", NULL };
+#endif
+
+struct omapflash_info {
+	struct mtd_partition	*parts;
+	struct mtd_info		*mtd;
+	struct map_info		map;
+};
+
+static void omap_set_vpp(struct map_info *map, int enable)
+{
+	static int	count;
+
+	if (enable) {
+		if (count++ == 0)
+			OMAP_EMIFS_CONFIG_REG |= OMAP_EMIFS_CONFIG_WP;
+	} else {
+		if (count && (--count == 0))
+			OMAP_EMIFS_CONFIG_REG &= ~OMAP_EMIFS_CONFIG_WP;
+	}
+}
+
+static int __devinit omapflash_probe(struct device *dev)
+{
+	int err;
+	struct omapflash_info *info;
+	struct platform_device *pdev = to_platform_device(dev);
+	struct flash_platform_data *pdata = pdev->dev.platform_data;
+	struct resource *res = pdev->resource;
+	unsigned long size = res->end - res->start + 1;
+
+	info = kmalloc(sizeof(struct omapflash_info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	memset(info, 0, sizeof(struct omapflash_info));
+
+	if (!request_mem_region(res->start, size, "flash")) {
+		err = -EBUSY;
+		goto out_free_info;
+	}
+
+	info->map.virt		= ioremap(res->start, size);
+	if (!info->map.virt) {
+		err = -ENOMEM;
+		goto out_release_mem_region;
+	}
+	info->map.name		= pdev->dev.bus_id;
+	info->map.phys		= res->start;
+	info->map.size		= size;
+	info->map.bankwidth	= pdata->width;
+	info->map.set_vpp	= omap_set_vpp;
+
+	simple_map_init(&info->map);
+	info->mtd = do_map_probe(pdata->map_name, &info->map);
+	if (!info->mtd) {
+		err = -EIO;
+		goto out_iounmap;
+	}
+	info->mtd->owner = THIS_MODULE;
+
+#ifdef CONFIG_MTD_PARTITIONS
+	err = parse_mtd_partitions(info->mtd, part_probes, &info->parts, 0);
+	if (err > 0)
+		add_mtd_partitions(info->mtd, info->parts, err);
+	else if (err < 0 && pdata->parts)
+		add_mtd_partitions(info->mtd, pdata->parts, pdata->nr_parts);
+	else
+#endif
+		add_mtd_device(info->mtd);
+
+	dev_set_drvdata(&pdev->dev, info);
+
+	return 0;
+
+out_iounmap:
+	iounmap(info->map.virt);
+out_release_mem_region:
+	release_mem_region(res->start, size);
+out_free_info:
+	kfree(info);
+
+	return err;
+}
+
+static int __devexit omapflash_remove(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct omapflash_info *info = dev_get_drvdata(&pdev->dev);
+
+	dev_set_drvdata(&pdev->dev, NULL);
+
+	if (info) {
+		if (info->parts) {
+			del_mtd_partitions(info->mtd);
+			kfree(info->parts);
+		} else
+			del_mtd_device(info->mtd);
+		map_destroy(info->mtd);
+		release_mem_region(info->map.phys, info->map.size);
+		iounmap((void __iomem *) info->map.virt);
+		kfree(info);
+	}
+
+	return 0;
+}
+
+static struct device_driver omapflash_driver = {
+	.name	= "omapflash",
+	.bus	= &platform_bus_type,
+	.probe	= omapflash_probe,
+	.remove	= __devexit_p(omapflash_remove),
+};
+
+static int __init omapflash_init(void)
+{
+	return driver_register(&omapflash_driver);
+}
+
+static void __exit omapflash_exit(void)
+{
+	driver_unregister(&omapflash_driver);
+}
+
+module_init(omapflash_init);
+module_exit(omapflash_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("MTD NOR map driver for TI OMAP boards");
+
diff --git a/drivers/mtd/maps/pb1550-flash.c b/drivers/mtd/maps/pb1550-flash.c
deleted file mode 100644
index 1424726a..0000000
--- a/drivers/mtd/maps/pb1550-flash.c
+++ /dev/null
@@ -1,203 +0,0 @@
-/*
- * Flash memory access on Alchemy Pb1550 board
- * 
- * $Id: pb1550-flash.c,v 1.6 2004/11/04 13:24:15 gleixner Exp $
- *
- * (C) 2004 Embedded Edge, LLC, based on pb1550-flash.c:
- * (C) 2003 Pete Popov <ppopov@pacbell.net>
- * 
- */
-
-#include <linux/config.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/io.h>
-#include <asm/au1000.h>
-#include <asm/pb1550.h>
-
-#ifdef 	DEBUG_RW
-#define	DBG(x...)	printk(x)
-#else
-#define	DBG(x...)	
-#endif
-
-static unsigned long window_addr;
-static unsigned long window_size;
-
-
-static struct map_info pb1550_map = {
-	.name =	"Pb1550 flash",
-};
-
-static unsigned char flash_bankwidth = 4;
-
-/* 
- * Support only 64MB NOR Flash parts
- */
-
-#ifdef PB1550_BOTH_BANKS
-/* both banks will be used. Combine the first bank and the first 
- * part of the second bank together into a single jffs/jffs2
- * partition.
- */
-static struct mtd_partition pb1550_partitions[] = {
-	/* assume boot[2:0]:swap is '0000' or '1000', which translates to:
-	 * 1C00 0000 1FFF FFFF CE0 64MB Boot NOR Flash
-	 * 1800 0000 1BFF FFFF CE0 64MB Param NOR Flash
-	 */
-        {
-                .name = "User FS",
-                .size =   (0x1FC00000 - 0x18000000),
-                .offset = 0x0000000
-        },{
-                .name = "yamon",
-                .size = 0x0100000,
-		.offset = MTDPART_OFS_APPEND,
-                .mask_flags = MTD_WRITEABLE
-        },{
-                .name = "raw kernel",
-		.size = (0x300000 - 0x40000), /* last 256KB is yamon env */
-		.offset = MTDPART_OFS_APPEND,
-        }
-};
-#elif defined(PB1550_BOOT_ONLY)
-static struct mtd_partition pb1550_partitions[] = {
-	/* assume boot[2:0]:swap is '0000' or '1000', which translates to:
-	 * 1C00 0000 1FFF FFFF CE0 64MB Boot NOR Flash
-	 */
-        {
-                .name = "User FS",
-                .size =   0x03c00000,
-                .offset = 0x0000000
-        },{
-                .name = "yamon",
-                .size = 0x0100000,
-		.offset = MTDPART_OFS_APPEND,
-                .mask_flags = MTD_WRITEABLE
-        },{
-                .name = "raw kernel",
-		.size = (0x300000-0x40000), /* last 256KB is yamon env */
-		.offset = MTDPART_OFS_APPEND,
-        }
-};
-#elif defined(PB1550_USER_ONLY)
-static struct mtd_partition pb1550_partitions[] = {
-	/* assume boot[2:0]:swap is '0000' or '1000', which translates to:
-	 * 1800 0000 1BFF FFFF CE0 64MB Param NOR Flash
-	 */
-        {
-                .name = "User FS",
-                .size = (0x4000000 - 0x200000), /* reserve 2MB for raw kernel */
-                .offset = 0x0000000
-        },{
-                .name = "raw kernel",
-		.size = MTDPART_SIZ_FULL,
-		.offset = MTDPART_OFS_APPEND,
-        }
-};
-#else
-#error MTD_PB1550 define combo error /* should never happen */
-#endif
-
-#define NB_OF(x)  (sizeof(x)/sizeof(x[0]))
-
-static struct mtd_info *mymtd;
-
-/*
- * Probe the flash density and setup window address and size
- * based on user CONFIG options. There are times when we don't
- * want the MTD driver to be probing the boot or user flash,
- * so having the option to enable only one bank is important.
- */
-int setup_flash_params(void)
-{
-	u16 boot_swapboot;
-	boot_swapboot = (au_readl(MEM_STSTAT) & (0x7<<1)) | 
-		((bcsr->status >> 6)  & 0x1);
-	printk("Pb1550 MTD: boot:swap %d\n", boot_swapboot);
-
-	switch (boot_swapboot) {
-		case 0: /* 512Mbit devices, both enabled */
-		case 1: 
-		case 8:
-		case 9: 
-#if defined(PB1550_BOTH_BANKS)
-			window_addr = 0x18000000;
-			window_size = 0x8000000; 
-#elif defined(PB1550_BOOT_ONLY)
-			window_addr = 0x1C000000;
-			window_size = 0x4000000; 
-#else /* USER ONLY */
-			window_addr = 0x1E000000;
-			window_size = 0x4000000; 
-#endif
-			break;
-		case 0xC:
-		case 0xD:
-		case 0xE:
-		case 0xF: 
-			/* 64 MB Boot NOR Flash is disabled */
-			/* and the start address is moved to 0x0C00000 */
-			window_addr = 0x0C000000;
-			window_size = 0x4000000; 
-		default:
-			printk("Pb1550 MTD: unsupported boot:swap setting\n");
-			return 1;
-	}
-	return 0;
-}
-
-int __init pb1550_mtd_init(void)
-{
-	struct mtd_partition *parts;
-	int nb_parts = 0;
-	
-	/* Default flash bankwidth */
-	pb1550_map.bankwidth = flash_bankwidth;
-
-	if (setup_flash_params()) 
-		return -ENXIO;
-
-	/*
-	 * Static partition definition selection
-	 */
-	parts = pb1550_partitions;
-	nb_parts = NB_OF(pb1550_partitions);
-	pb1550_map.size = window_size;
-
-	/*
-	 * Now let's probe for the actual flash.  Do it here since
-	 * specific machine settings might have been set above.
-	 */
-	printk(KERN_NOTICE "Pb1550 flash: probing %d-bit flash bus\n", 
-			pb1550_map.bankwidth*8);
-	pb1550_map.virt = ioremap(window_addr, window_size);
-	mymtd = do_map_probe("cfi_probe", &pb1550_map);
-	if (!mymtd) return -ENXIO;
-	mymtd->owner = THIS_MODULE;
-
-	add_mtd_partitions(mymtd, parts, nb_parts);
-	return 0;
-}
-
-static void __exit pb1550_mtd_cleanup(void)
-{
-	if (mymtd) {
-		del_mtd_partitions(mymtd);
-		map_destroy(mymtd);
-	}
-}
-
-module_init(pb1550_mtd_init);
-module_exit(pb1550_mtd_cleanup);
-
-MODULE_AUTHOR("Embedded Edge, LLC");
-MODULE_DESCRIPTION("Pb1550 mtd map driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/maps/pb1xxx-flash.c b/drivers/mtd/maps/pb1xxx-flash.c
deleted file mode 100644
index 06e7315..0000000
--- a/drivers/mtd/maps/pb1xxx-flash.c
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * Flash memory access on Alchemy Pb1xxx boards
- * 
- * (C) 2001 Pete Popov <ppopov@mvista.com>
- * 
- * $Id: pb1xxx-flash.c,v 1.14 2004/11/04 13:24:15 gleixner Exp $
- */
-
-#include <linux/config.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/io.h>
-
-#ifdef 	DEBUG_RW
-#define	DBG(x...)	printk(x)
-#else
-#define	DBG(x...)	
-#endif
-
-#ifdef CONFIG_MIPS_PB1000
-
-#define WINDOW_ADDR 0x1F800000
-#define WINDOW_SIZE 0x800000
-
-static struct mtd_partition pb1xxx_partitions[] = {
-        {
-                .name         =  "yamon env",
-                .size         =   0x00020000,
-                .offset       =   0,
-                .mask_flags   =   MTD_WRITEABLE},
-	{
-                .name         =   "User FS",
-                .size         =   0x003e0000,
-                .offset       =   0x20000,},
-	{
-                .name         =   "boot code",
-                .size         =   0x100000,
-                .offset       =   0x400000,
-                .mask_flags   =   MTD_WRITEABLE},
-	{
-                .name         =   "raw/kernel",
-                .size         =   0x300000,
-                .offset       =   0x500000}
-};
-
-#elif defined(CONFIG_MIPS_PB1500) || defined(CONFIG_MIPS_PB1100)
-
-#if defined(CONFIG_MTD_PB1500_BOOT) && defined(CONFIG_MTD_PB1500_USER)
-/* both 32MB banks will be used. Combine the first 32MB bank and the
- * first 28MB of the second bank together into a single jffs/jffs2
- * partition.
- */
-#define WINDOW_ADDR 0x1C000000
-#define WINDOW_SIZE 0x4000000
-static struct mtd_partition pb1xxx_partitions[] = {
-        {
-                .name         =   "User FS",
-                .size         =   0x3c00000,
-                .offset       =   0x0000000
-        },{
-                .name         =   "yamon",
-                .size         =   0x0100000,
-                .offset       =   0x3c00000,
-                .mask_flags   =   MTD_WRITEABLE
-        },{
-                .name         =   "raw kernel",
-                .size         =   0x02c0000,
-                .offset       =   0x3d00000
-        }
-};
-#elif defined(CONFIG_MTD_PB1500_BOOT) && !defined(CONFIG_MTD_PB1500_USER)
-#define WINDOW_ADDR 0x1E000000
-#define WINDOW_SIZE 0x2000000
-static struct mtd_partition pb1xxx_partitions[] = {
-        {
-                .name         =   "User FS",
-                .size         =   0x1c00000,
-                .offset       =   0x0000000
-        },{
-                .name         =   "yamon",
-                .size         =   0x0100000,
-                .offset       =   0x1c00000,
-                .mask_flags   =   MTD_WRITEABLE
-        },{
-                .name         =   "raw kernel",
-                .size         =   0x02c0000,
-                .offset       =   0x1d00000
-        }
-};
-#elif !defined(CONFIG_MTD_PB1500_BOOT) && defined(CONFIG_MTD_PB1500_USER)
-#define WINDOW_ADDR 0x1C000000
-#define WINDOW_SIZE 0x2000000
-static struct mtd_partition pb1xxx_partitions[] = {
-        {
-                .name         =   "User FS",
-                .size         =    0x1e00000,
-                .offset       =    0x0000000
-        },{
-                .name         =    "raw kernel",
-                .size         =    0x0200000,
-                .offset       =    0x1e00000,
-        }
-};
-#else
-#error MTD_PB1500 define combo error /* should never happen */
-#endif
-#else
-#error Unsupported board
-#endif
-
-#define NAME     	"Pb1x00 Linux Flash"
-#define PADDR    	WINDOW_ADDR
-#define BUSWIDTH	4
-#define SIZE		WINDOW_SIZE
-#define PARTITIONS	4
-
-static struct map_info pb1xxx_mtd_map = {
-	.name		= NAME,
-	.size		= SIZE,
-	.bankwidth	= BUSWIDTH,
-	.phys		= PADDR,
-};
-
-static struct mtd_info *pb1xxx_mtd;
-
-int __init pb1xxx_mtd_init(void)
-{
-	struct mtd_partition *parts;
-	int nb_parts = 0;
-	char *part_type;
-	
-	/*
-	 * Static partition definition selection
-	 */
-	part_type = "static";
-	parts = pb1xxx_partitions;
-	nb_parts = ARRAY_SIZE(pb1xxx_partitions);
-
-	/*
-	 * Now let's probe for the actual flash.  Do it here since
-	 * specific machine settings might have been set above.
-	 */
-	printk(KERN_NOTICE "Pb1xxx flash: probing %d-bit flash bus\n", 
-			BUSWIDTH*8);
-	pb1xxx_mtd_map.virt = ioremap(WINDOW_ADDR, WINDOW_SIZE);
-
-	simple_map_init(&pb1xxx_mtd_map);
-
-	pb1xxx_mtd = do_map_probe("cfi_probe", &pb1xxx_mtd_map);
-	if (!pb1xxx_mtd) return -ENXIO;
-	pb1xxx_mtd->owner = THIS_MODULE;
-
-	add_mtd_partitions(pb1xxx_mtd, parts, nb_parts);
-	return 0;
-}
-
-static void __exit pb1xxx_mtd_cleanup(void)
-{
-	if (pb1xxx_mtd) {
-		del_mtd_partitions(pb1xxx_mtd);
-		map_destroy(pb1xxx_mtd);
-		iounmap((void *) pb1xxx_mtd_map.virt);
-	}
-}
-
-module_init(pb1xxx_mtd_init);
-module_exit(pb1xxx_mtd_cleanup);
-
-MODULE_AUTHOR("Pete Popov");
-MODULE_DESCRIPTION("Pb1xxx CFI map driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/maps/pci.c b/drivers/mtd/maps/pci.c
index 08b60bd..18dbd3a 100644
--- a/drivers/mtd/maps/pci.c
+++ b/drivers/mtd/maps/pci.c
@@ -7,7 +7,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
- *  $Id: pci.c,v 1.9 2004/11/28 09:40:40 dwmw2 Exp $
+ *  $Id: pci.c,v 1.10 2005/03/18 14:04:35 gleixner Exp $
  * 
  * Generic PCI memory map driver.  We support the following boards:
  *  - Intel IQ80310 ATU.
@@ -370,7 +370,7 @@ static struct pci_driver mtd_pci_driver = {
 
 static int __init mtd_pci_maps_init(void)
 {
-	return pci_module_init(&mtd_pci_driver);
+	return pci_register_driver(&mtd_pci_driver);
 }
 
 static void __exit mtd_pci_maps_exit(void)
diff --git a/drivers/mtd/maps/plat-ram.c b/drivers/mtd/maps/plat-ram.c
new file mode 100644
index 0000000..118b045
--- /dev/null
+++ b/drivers/mtd/maps/plat-ram.c
@@ -0,0 +1,278 @@
+/* drivers/mtd/maps/plat-ram.c
+ *
+ * (c) 2004-2005 Simtec Electronics
+ *	http://www.simtec.co.uk/products/SWLINUX/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Generic platfrom device based RAM map
+ *
+ * $Id: plat-ram.c,v 1.3 2005/03/19 22:41:27 gleixner Exp $
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/plat-ram.h>
+
+#include <asm/io.h>
+
+/* private structure for each mtd platform ram device created */
+
+struct platram_info {
+	struct device		*dev;
+	struct mtd_info		*mtd;
+	struct map_info		 map;
+	struct mtd_partition	*partitions;
+	struct resource		*area;
+	struct platdata_mtd_ram	*pdata;
+};
+
+/* to_platram_info()
+ *
+ * device private data to struct platram_info conversion
+*/
+
+static inline struct platram_info *to_platram_info(struct device *dev)
+{
+	return (struct platram_info *)dev_get_drvdata(dev);
+}
+
+/* platram_setrw
+ *
+ * call the platform device's set rw/ro control
+ *
+ * to = 0 => read-only
+ *    = 1 => read-write
+*/
+
+static inline void platram_setrw(struct platram_info *info, int to)
+{
+	if (info->pdata == NULL)
+		return;
+
+	if (info->pdata->set_rw != NULL)
+		(info->pdata->set_rw)(info->dev, to);
+}
+
+/* platram_remove
+ *
+ * called to remove the device from the driver's control
+*/
+
+static int platram_remove(struct device *dev)
+{
+	struct platram_info *info = to_platram_info(dev);
+
+	dev_set_drvdata(dev, NULL);
+
+	dev_dbg(dev, "removing device\n");
+
+	if (info == NULL) 
+		return 0;
+
+	if (info->mtd) {
+#ifdef CONFIG_MTD_PARTITIONS
+		if (info->partitions) {
+			del_mtd_partitions(info->mtd);
+			kfree(info->partitions);
+		}
+#endif
+		del_mtd_device(info->mtd);
+		map_destroy(info->mtd);
+	}
+
+	/* ensure ram is left read-only */
+
+	platram_setrw(info, PLATRAM_RO);
+
+	/* release resources */
+
+	if (info->area) {
+		release_resource(info->area);
+		kfree(info->area);
+	}
+
+	if (info->map.virt != NULL)
+		iounmap(info->map.virt);
+	
+	kfree(info);
+
+	return 0;
+}
+
+/* platram_probe
+ *
+ * called from device drive system when a device matching our
+ * driver is found.
+*/
+
+static int platram_probe(struct device *dev)
+{
+	struct platform_device *pd = to_platform_device(dev);
+	struct platdata_mtd_ram	*pdata;
+	struct platram_info *info;
+	struct resource *res;
+	int err = 0;
+
+	dev_dbg(dev, "probe entered\n");
+	
+	if (dev->platform_data == NULL) {
+		dev_err(dev, "no platform data supplied\n");
+		err = -ENOENT;
+		goto exit_error;
+	}
+
+	pdata = dev->platform_data;
+
+	info = kmalloc(sizeof(*info), GFP_KERNEL);
+	if (info == NULL) {
+		dev_err(dev, "no memory for flash info\n");
+		err = -ENOMEM;
+		goto exit_error;
+	}
+
+	memset(info, 0, sizeof(*info));
+	dev_set_drvdata(dev, info);
+
+	info->dev = dev;
+	info->pdata = pdata;
+
+	/* get the resource for the memory mapping */
+
+	res = platform_get_resource(pd, IORESOURCE_MEM, 0);
+
+	if (res == NULL) {
+		dev_err(dev, "no memory resource specified\n");
+		err = -ENOENT;
+		goto exit_free;
+	}
+
+	dev_dbg(dev, "got platform resource %p (0x%lx)\n", res, res->start);
+
+	/* setup map parameters */
+
+	info->map.phys = res->start;
+	info->map.size = (res->end - res->start) + 1;
+	info->map.name = pdata->mapname != NULL ? pdata->mapname : pd->name;
+	info->map.bankwidth = pdata->bankwidth;
+
+	/* register our usage of the memory area */
+
+	info->area = request_mem_region(res->start, info->map.size, pd->name);
+	if (info->area == NULL) {
+		dev_err(dev, "failed to request memory region\n");
+		err = -EIO;
+		goto exit_free;
+	}
+
+	/* remap the memory area */
+
+	info->map.virt = ioremap(res->start, info->map.size);
+	dev_dbg(dev, "virt %p, %lu bytes\n", info->map.virt, info->map.size);
+
+	if (info->map.virt == NULL) {
+		dev_err(dev, "failed to ioremap() region\n");
+		err = -EIO;
+		goto exit_free;
+	}
+
+	simple_map_init(&info->map);
+
+	dev_dbg(dev, "initialised map, probing for mtd\n");
+
+	/* probe for the right mtd map driver */
+
+	info->mtd = do_map_probe("map_ram" , &info->map);
+	if (info->mtd == NULL) {
+		dev_err(dev, "failed to probe for map_ram\n");
+		err = -ENOMEM;
+		goto exit_free;
+	}
+
+	info->mtd->owner = THIS_MODULE;
+
+	platram_setrw(info, PLATRAM_RW);
+
+	/* check to see if there are any available partitions, or wether
+	 * to add this device whole */
+
+#ifdef CONFIG_MTD_PARTITIONS
+	if (pdata->nr_partitions > 0) {
+		const char **probes = { NULL };
+
+		if (pdata->probes)
+			probes = (const char **)pdata->probes;
+
+		err = parse_mtd_partitions(info->mtd, probes,
+					   &info->partitions, 0);
+		if (err > 0) {
+			err = add_mtd_partitions(info->mtd, info->partitions,
+						 err);
+		}
+	}
+#endif /* CONFIG_MTD_PARTITIONS */
+
+	if (add_mtd_device(info->mtd)) {
+		dev_err(dev, "add_mtd_device() failed\n");
+		err = -ENOMEM;
+	}
+	
+	dev_info(dev, "registered mtd device\n");
+	return err;
+
+ exit_free:
+	platram_remove(dev);
+ exit_error:
+	return err;
+}
+
+/* device driver info */
+
+static struct device_driver platram_driver = {
+	.name		= "mtd-ram",
+	.bus		= &platform_bus_type,
+	.probe		= platram_probe,
+	.remove		= platram_remove,
+};
+
+/* module init/exit */
+
+static int __init platram_init(void)
+{
+	printk("Generic platform RAM MTD, (c) 2004 Simtec Electronics\n");
+	return driver_register(&platram_driver);
+}
+
+static void __exit platram_exit(void)
+{
+	driver_unregister(&platram_driver);
+}
+
+module_init(platram_init);
+module_exit(platram_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_DESCRIPTION("MTD platform RAM map driver");
diff --git a/drivers/mtd/maps/scb2_flash.c b/drivers/mtd/maps/scb2_flash.c
index 5bb3b60..97a8dfd 100644
--- a/drivers/mtd/maps/scb2_flash.c
+++ b/drivers/mtd/maps/scb2_flash.c
@@ -1,6 +1,6 @@
 /*
  * MTD map driver for BIOS Flash on Intel SCB2 boards
- * $Id: scb2_flash.c,v 1.11 2004/11/28 09:40:40 dwmw2 Exp $
+ * $Id: scb2_flash.c,v 1.12 2005/03/18 14:04:35 gleixner Exp $
  * Copyright (C) 2002 Sun Microsystems, Inc.
  * Tim Hockin <thockin@sun.com>
  *
@@ -238,7 +238,7 @@ static struct pci_driver scb2_flash_driver = {
 static int __init
 scb2_flash_init(void)
 {
-	return pci_module_init(&scb2_flash_driver);
+	return pci_register_driver(&scb2_flash_driver);
 }
 
 static void __exit
diff --git a/drivers/mtd/maps/sharpsl-flash.c b/drivers/mtd/maps/sharpsl-flash.c
index b3b39cb..d15da6f 100644
--- a/drivers/mtd/maps/sharpsl-flash.c
+++ b/drivers/mtd/maps/sharpsl-flash.c
@@ -4,7 +4,7 @@
  * Copyright (C) 2001 Lineo Japan, Inc.
  * Copyright (C) 2002  SHARP
  *
- * $Id: sharpsl-flash.c,v 1.2 2004/11/24 20:38:06 rpurdie Exp $
+ * $Id: sharpsl-flash.c,v 1.5 2005/03/21 08:42:11 rpurdie Exp $
  *
  * based on rpxlite.c,v 1.15 2001/10/02 15:05:14 dwmw2 Exp
  *          Handle mapping of the flash on the RPX Lite and CLLF boards
@@ -24,13 +24,14 @@
 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
-#include <asm/io.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
 #include <linux/mtd/partitions.h>
+#include <asm/io.h>
+#include <asm/mach-types.h>
 
 #define WINDOW_ADDR 0x00000000
-#define WINDOW_SIZE 0x01000000
+#define WINDOW_SIZE 0x00800000
 #define BANK_WIDTH 2
 
 static struct mtd_info *mymtd;
@@ -44,9 +45,7 @@ struct map_info sharpsl_map = {
 
 static struct mtd_partition sharpsl_partitions[1] = {
 	{
-		name:		"Filesystem",
-		size:		0x006d0000,
-		offset:		0x00120000
+		name:		"Boot PROM Filesystem",
 	}
 };
 
@@ -58,12 +57,16 @@ int __init init_sharpsl(void)
 	int nb_parts = 0;
 	char *part_type = "static";
 
-	printk(KERN_NOTICE "Sharp SL series flash device: %x at %x\n", WINDOW_SIZE, WINDOW_ADDR);
+	printk(KERN_NOTICE "Sharp SL series flash device: %x at %x\n", 
+		WINDOW_SIZE, WINDOW_ADDR);
 	sharpsl_map.virt = ioremap(WINDOW_ADDR, WINDOW_SIZE);
 	if (!sharpsl_map.virt) {
 		printk("Failed to ioremap\n");
 		return -EIO;
 	}
+
+	simple_map_init(&sharpsl_map);
+
 	mymtd = do_map_probe("map_rom", &sharpsl_map);
 	if (!mymtd) {
 		iounmap(sharpsl_map.virt);
@@ -72,6 +75,22 @@ int __init init_sharpsl(void)
 
 	mymtd->owner = THIS_MODULE;
 
+	if (machine_is_corgi() || machine_is_shepherd() || machine_is_husky() 
+		|| machine_is_poodle()) {
+		sharpsl_partitions[0].size=0x006d0000;
+		sharpsl_partitions[0].offset=0x00120000;
+	} else if (machine_is_tosa()) {
+		sharpsl_partitions[0].size=0x006a0000;
+		sharpsl_partitions[0].offset=0x00160000;
+	} else if (machine_is_spitz()) {
+		sharpsl_partitions[0].size=0x006b0000;
+		sharpsl_partitions[0].offset=0x00140000;
+	} else {
+		map_destroy(mymtd);
+		iounmap(sharpsl_map.virt);	
+		return -ENODEV;
+	}
+	
 	parts = sharpsl_partitions;
 	nb_parts = NB_OF(sharpsl_partitions);