[MTD] maps/Kconfig: Simplify and update dependencies

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

1 files changed, 32 insertions, 29 deletions

diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 7f1ce08..94a693f 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -94,7 +94,10 @@ config MTD_NETSC520
 
 config MTD_TS5500
 	tristate "JEDEC Flash device mapped on Technologic Systems TS-5500"
-	depends on X86 && MTD_JEDECPROBE && MTD_PARTITIONS
+	depends on ELAN
+	select MTD_PARTITIONS
+	select MTD_JEDECPROBE
+	select MTD_CFI_AMDSTD
 	help
 	  This provides a driver for the on-board flash of the Technologic
 	  System's TS-5500 board. The 2MB flash is split into 3 partitions
@@ -210,7 +213,7 @@ config MTD_NETtel
 
 config MTD_ALCHEMY
 	tristate '  AMD Alchemy Pb1xxx/Db1xxx/RDK MTD support' 
-	depends on MIPS && SOC_AU1X00
+	depends on SOC_AU1X00
 	help
 	  Flash memory access on AMD Alchemy Pb/Db/RDK Reference Boards
 
@@ -248,14 +251,14 @@ config MTD_L440GX
 
 config MTD_SBC8240
 	tristate "Flash device on SBC8240"
-	depends on PPC32 && MTD_JEDECPROBE && 6xx && 8260
+	depends on MTD_JEDECPROBE && 8260
 	help
           Flash access on the SBC8240 board from Wind River.  See
           <http://www.windriver.com/products/sbc8240/>
 
 config MTD_TQM8XXL
 	tristate "CFI Flash device mapped on TQM8XXL"
-	depends on MTD_CFI && PPC32 && 8xx && TQM8xxL
+	depends on MTD_CFI && TQM8xxL
 	help
 	  The TQM8xxL PowerPC board has up to two banks of CFI-compliant
 	  chips, currently uses AMD one. This 'mapping' driver supports
@@ -265,7 +268,7 @@ config MTD_TQM8XXL
 
 config MTD_RPXLITE
 	tristate "CFI Flash device mapped on RPX Lite or CLLF"
-	depends on MTD_CFI && PPC32 && 8xx && (RPXCLASSIC || RPXLITE)
+	depends on MTD_CFI && (RPXCLASSIC || RPXLITE)
 	help
 	  The RPXLite PowerPC board has CFI-compliant chips mapped in
 	  a strange sparse mapping. This 'mapping' driver supports that
@@ -275,7 +278,7 @@ config MTD_RPXLITE
 
 config MTD_MBX860
 	tristate "System flash on MBX860 board"
-	depends on MTD_CFI && PPC32 && 8xx && MBX
+	depends on MTD_CFI && MBX
 	help
 	  This enables access routines for the flash chips on the Motorola
 	  MBX860 board. If you have one of these boards and would like
@@ -283,7 +286,7 @@ config MTD_MBX860
 
 config MTD_DBOX2
 	tristate "CFI Flash device mapped on D-Box2"
-	depends on PPC32 && 8xx && DBOX2 && MTD_CFI_INTELSTD && MTD_CFI_INTELEXT && MTD_CFI_AMDSTD
+	depends on DBOX2 && MTD_CFI_INTELSTD && MTD_CFI_INTELEXT && MTD_CFI_AMDSTD
 	help
 	  This enables access routines for the flash chips on the Nokia/Sagem
 	  D-Box 2 board. If you have one of these boards and would like to use
@@ -291,14 +294,14 @@ config MTD_DBOX2
 
 config MTD_CFI_FLAGADM
 	tristate "CFI Flash device mapping on FlagaDM"
-	depends on PPC32 && 8xx && MTD_CFI
+	depends on 8xx && MTD_CFI
 	help
 	  Mapping for the Flaga digital module. If you don't have one, ignore
 	  this setting.
 
 config MTD_BEECH
 	tristate "CFI Flash device mapped on IBM 405LP Beech"
-	depends on MTD_CFI && PPC32 && 40x && BEECH
+	depends on MTD_CFI && BEECH
 	help
 	  This enables access routines for the flash chips on the IBM
 	  405LP Beech board. If you have one of these boards and would like
@@ -306,7 +309,7 @@ config MTD_BEECH
 
 config MTD_ARCTIC
 	tristate "CFI Flash device mapped on IBM 405LP Arctic"
-	depends on MTD_CFI && PPC32 && 40x && ARCTIC2
+	depends on MTD_CFI && ARCTIC2
 	help
 	  This enables access routines for the flash chips on the IBM 405LP
 	  Arctic board. If you have one of these boards and would like to
@@ -314,7 +317,7 @@ config MTD_ARCTIC
 
 config MTD_WALNUT
 	tristate "Flash device mapped on IBM 405GP Walnut"
-	depends on MTD_JEDECPROBE && PPC32 && 40x && WALNUT
+	depends on MTD_JEDECPROBE && WALNUT
 	help
 	  This enables access routines for the flash chips on the IBM 405GP
 	  Walnut board. If you have one of these boards and would like to
@@ -322,7 +325,7 @@ config MTD_WALNUT
 
 config MTD_EBONY
 	tristate "Flash devices mapped on IBM 440GP Ebony"
-	depends on MTD_JEDECPROBE && PPC32 && 44x && EBONY
+	depends on MTD_JEDECPROBE && EBONY
 	help
 	  This enables access routines for the flash chips on the IBM 440GP
 	  Ebony board. If you have one of these boards and would like to
@@ -330,7 +333,7 @@ config MTD_EBONY
 
 config MTD_OCOTEA
 	tristate "Flash devices mapped on IBM 440GX Ocotea"
-	depends on MTD_CFI && PPC32 && 44x && OCOTEA
+	depends on MTD_CFI && OCOTEA
 	help
 	  This enables access routines for the flash chips on the IBM 440GX
 	  Ocotea board. If you have one of these boards and would like to
@@ -338,7 +341,7 @@ config MTD_OCOTEA
 
 config MTD_REDWOOD
 	tristate "CFI Flash devices mapped on IBM Redwood"
-	depends on MTD_CFI && PPC32 && 4xx && 40x && ( REDWOOD_4 || REDWOOD_5 || REDWOOD_6 )
+	depends on MTD_CFI && ( REDWOOD_4 || REDWOOD_5 || REDWOOD_6 )
 	help
 	  This enables access routines for the flash chips on the IBM
 	  Redwood board. If you have one of these boards and would like to
@@ -409,14 +412,14 @@ config MTD_ARM_INTEGRATOR
 
 config MTD_CDB89712
 	tristate "Cirrus CDB89712 evaluation board mappings"
-	depends on ARM && MTD_CFI && ARCH_CDB89712
+	depends on MTD_CFI && ARCH_CDB89712
 	help
 	  This enables access to the flash or ROM chips on the CDB89712 board.
 	  If you have such a board, say 'Y'.
 
 config MTD_SA1100
 	tristate "CFI Flash device mapped on StrongARM SA11x0"
-	depends on ARM && MTD_CFI && ARCH_SA1100 && MTD_PARTITIONS
+	depends on MTD_CFI && ARCH_SA1100 && MTD_PARTITIONS
 	help
 	  This enables access to the flash chips on most platforms based on
 	  the SA1100 and SA1110, including the Assabet and the Compaq iPAQ.
@@ -424,13 +427,13 @@ config MTD_SA1100
 
 config MTD_IPAQ
 	tristate "CFI Flash device mapped on Compaq/HP iPAQ"
-	depends on ARM && IPAQ_HANDHELD && MTD_CFI
+	depends on IPAQ_HANDHELD && MTD_CFI
 	help
 	  This provides a driver for the on-board flash of the iPAQ.
 
 config MTD_DC21285
 	tristate "CFI Flash device mapped on DC21285 Footbridge"
-	depends on ARM && MTD_CFI && ARCH_FOOTBRIDGE && MTD_COMPLEX_MAPPINGS
+	depends on MTD_CFI && ARCH_FOOTBRIDGE && MTD_COMPLEX_MAPPINGS
 	help
 	  This provides a driver for the flash accessed using Intel's
 	  21285 bridge used with Intel's StrongARM processors. More info at
@@ -438,7 +441,7 @@ config MTD_DC21285
 
 config MTD_IQ80310
 	tristate "CFI Flash device mapped on the XScale IQ80310 board"
-	depends on ARM && MTD_CFI && ARCH_IQ80310
+	depends on MTD_CFI && ARCH_IQ80310
 	help
 	  This enables access routines for the flash chips on the Intel XScale
 	  IQ80310 evaluation board. If you have one of these boards and would 
@@ -446,7 +449,7 @@ config MTD_IQ80310
 
 config MTD_IXP4XX
 	tristate "CFI Flash device mapped on Intel IXP4xx based systems"
-	depends on ARM && MTD_CFI && MTD_COMPLEX_MAPPINGS && ARCH_IXP4XX
+	depends on MTD_CFI && MTD_COMPLEX_MAPPINGS && ARCH_IXP4XX
 	help
 	  This enables MTD access to flash devices on platforms based 
 	  on Intel's IXP4xx family of network processors such as the
@@ -455,7 +458,7 @@ config MTD_IXP4XX
 
 config MTD_IXP2000
 	tristate "CFI Flash device mapped on Intel IXP2000 based systems"
-	depends on ARM && MTD_CFI && MTD_COMPLEX_MAPPINGS && ARCH_IXP2000
+	depends on MTD_CFI && MTD_COMPLEX_MAPPINGS && ARCH_IXP2000
 	help
 	  This enables MTD access to flash devices on platforms based 
 	  on Intel's IXP2000 family of network processors such as the
@@ -464,7 +467,7 @@ config MTD_IXP2000
 
 config MTD_EPXA10DB
 	tristate "CFI Flash device mapped on Epxa10db"
-	depends on ARM && MTD_CFI && MTD_PARTITIONS && ARCH_CAMELOT
+	depends on MTD_CFI && MTD_PARTITIONS && ARCH_CAMELOT
 	help
 	  This enables support for the flash devices on the Altera
 	  Excalibur XA10 Development Board. If you are building a kernel
@@ -472,21 +475,21 @@ config MTD_EPXA10DB
 
 config MTD_FORTUNET
 	tristate "CFI Flash device mapped on the FortuNet board"
-	depends on ARM && MTD_CFI && MTD_PARTITIONS && SA1100_FORTUNET
+	depends on MTD_CFI && MTD_PARTITIONS && SA1100_FORTUNET
 	help
 	  This enables access to the Flash on the FortuNet board.  If you
 	  have such a board, say 'Y'.
 
 config MTD_AUTCPU12
 	tristate "NV-RAM mapping AUTCPU12 board"
-	depends on ARM && ARCH_AUTCPU12
+	depends on ARCH_AUTCPU12
 	help
 	  This enables access to the NV-RAM on autronix autcpu12 board.
 	  If you have such a board, say 'Y'.
 
 config MTD_EDB7312
 	tristate "CFI Flash device mapped on EDB7312"
-	depends on ARM && MTD_CFI
+	depends on ARCH_EDB7312 && MTD_CFI
 	help
 	  This enables access to the CFI Flash on the Cogent EDB7312 board.
 	  If you have such a board, say 'Y' here.
@@ -500,7 +503,7 @@ config MTD_IMPA7
 
 config MTD_CEIVA
 	tristate "JEDEC Flash device mapped on Ceiva/Polaroid PhotoMax Digital Picture Frame"
-	depends on ARM && MTD_JEDECPROBE && ARCH_CEIVA
+	depends on MTD_JEDECPROBE && ARCH_CEIVA
 	help
 	  This enables access to the flash chips on the Ceiva/Polaroid
 	  PhotoMax Digital Picture Frame.
@@ -508,21 +511,21 @@ config MTD_CEIVA
 
 config MTD_NOR_TOTO
 	tristate "NOR Flash device on TOTO board"
-	depends on ARM && ARCH_OMAP && OMAP_TOTO
+	depends on ARCH_OMAP && OMAP_TOTO
 	help
 	  This enables access to the NOR flash on the Texas Instruments
 	  TOTO board.
 
 config MTD_H720X
 	tristate "Hynix evaluation board mappings"
-	depends on ARM && MTD_CFI && ( ARCH_H7201 || ARCH_H7202 )
+	depends on MTD_CFI && ( ARCH_H7201 || ARCH_H7202 )
 	help
 	  This enables access to the flash chips on the Hynix evaluation boards.
 	  If you have such a board, say 'Y'.
 
 config MTD_MPC1211
 	tristate "CFI Flash device mapped on Interface MPC-1211"
-	depends on SUPERH && SH_MPC1211 && MTD_CFI
+	depends on SH_MPC1211 && MTD_CFI
 	help
 	  This enables access to the flash chips on the Interface MPC-1211(CTP/PCI/MPC-SH02).
 	  If you have such a board, say 'Y'.